November 2024 - dovecot

Quota wrongfully reported as exceeded on shared mailbox
by adminkram＠tripelspark.de 07 May '25

07 May '25

Hi, I've been scratching my head without luck with the following problem: I've shared a mailbox from one user "COMPANY" to another user "JOE". Both users have quotas and both quotas are less than 50% used. When the user JOE tries to post a message into the shared folder, dovecot complains that the user would be over quota: bash# /usr/lib/dovecot/imap -u JOE 1 append shared/COMPANY/Sent/JOE {10} a NO [OVERQUOTA] Quota exceeded (mailbox for user is full) (0.057 + 0.000 + 0.057 secs). However, nobody is over quota: bash# doveadm quota get -u COMPANY Quota name Type Value Limit % User quota STORAGE 4754996 10485760 45 User quota MESSAGE 33695 - 0 bash# doveadm quota get -u JOE Quota name Type Value Limit % User quota STORAGE 14 1048576 0 User quota MESSAGE 3 - 0 Some more infos: 1. Dovecot-2.3.21 (+Debian updates) 2.3.21 (47349e2482) (NOTE: dovecot.org/mailing-lists says: Use dovecot –version to get it. The command is dovecot --version, though!) 2. I've performed "doveadm quota recalc" on both users, no change. 3. I've checked sharing ACL permissions, if I give just "l" permission, the response will be "NO [NOPERM] Permission denied". It does not seem to be an ACL permission reported wrongly. 4. I've tried increasing the quota size beyond reason (100 Gbytes for JOE), no change. 5. I've restarted dovecot after each change. 6. When trying to move a message into the shared Sent/joe folder in Thunderbird, same problem happens, Thunderbird displays the over quota message. Thunderbird cannot display the quota info for the shared folder, though. 7. I tried to enable rawlog (rawlog_dir in protocol imap). It does nothing helpful. It logs the manual commands from my pre-auth sessions (imap -u JOE) but it will stubbornly not log any commands issued by Thunderbird. ?! Any idea how to further debug this or what could be wrong? Thank you, Wolfgang

2 1

Stats-writer permission denied
by Ken Wright 15 Apr '25

15 Apr '25

I've got a new Dovecot error (well, new to me, at least)! I ran tail /var/log/mail.err and got the following: net_connect_unix(/var/run/dovecot/stats-writer) failed: Permission denied I checked the file, and it's owned by www-data and the www-data group, with read and write permissions for owner and group... just like I have specified in /etc/dovecot/conf.d/10-master.conf. I can't understand why permission is denied when the file permissions appear to be correct. Can anyone shed any light on this for me? Ubuntu 20.04 Dovecot 2.3.7.2 Ken

3 2

[Dovecot] auth: Error: net_connect_unix(anvil-auth-penalty) failed: Permission denied
by mailing＠securitylabs.it 03 Apr '25

03 Apr '25

Hello, just upgraded one of my testing machine from dovecot 1.2.15 to 2.0.7. After some trouble with permissions now all seems working, but when I stop dovecot I have these errors in log: Nov 9 17:08:07 in dovecot: master: Warning: Killed with signal 15 (by pid=20362 uid=0 code=kill) Nov 9 17:08:07 in dovecot: pop3-login: Error: read(anvil) failed: EOF Nov 9 17:08:07 in dovecot: imap-login: Error: read(anvil) failed: EOF Nov 9 17:08:07 in dovecot: imap(mailing(a)securitylabs.it): Server shutting down. bytes=410/59361 Nov 9 17:08:07 in dovecot: imap(mailing(a)securitylabs.it): Server shutting down. bytes=79/26605 Nov 9 17:08:07 in dovecot: imap(mailing(a)securitylabs.it): Server shutting down. bytes=802/55708 Nov 9 17:08:07 in dovecot: imap(mailing(a)securitylabs.it): Server shutting down. bytes=258/1242 Nov 9 17:08:07 in dovecot: auth: Error: read(anvil-auth-penalty) failed: EOF Nov 9 17:08:07 in dovecot: auth: Error: net_connect_unix(anvil-auth-penalty) failed: Permission denied dovecot -n: # 2.0.7: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-xen-686 i686 Debian squeeze/sid auth_cache_negative_ttl = 2 mins auth_cache_size = 1000 M auth_cache_ttl = 2 mins auth_master_user_separator = * auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@& disable_plaintext_auth = no dotlock_use_excl = yes first_valid_uid = 100 last_valid_uid = 105 lock_method = dotlock log_timestamp = "%Y-%m-%d %H:%M:%S " login_greeting = Server ready. mail_fsync = never mail_gid = Debian-exim mail_location = maildir:~/Maildir:INDEX=/var/indexes/%d/%n mail_privileged_group = Debian-exim mail_uid = Debian-exim managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date namespace { inbox = yes location = prefix = separator = / type = private } namespace { location = maildir:~/Maildir/expunged prefix = EXPUNGED/ separator = / type = private } namespace { location = maildir:~/Maildir/deleted prefix = DELETED/ separator = / type = private } namespace { location = maildir:~/Maildir/deleted/expunged prefix = DELETED/EXPUNGED/ separator = / type = private } passdb { args = /usr/local/etc/dovecot-sql.conf driver = sql } passdb { args = /usr/local/etc/passwd.masterusers driver = passwd-file master = yes pass = yes } plugin { lazy_expunge = EXPUNGED/ DELETED/ DELETED/EXPUNGED/ mail_log_events = delete expunge mail_log_group_events = quota = maildir quota_warning = storage=80%% /usr/local/bin/dovecot-quota-warning.sh 80 quota_warning2 = storage=90%% /usr/local/bin/dovecot-quota-warning.sh 90 sieve = ~/.dovecot.sieve } pop3_no_flag_updates = yes protocols = imap pop3 service auth { unix_listener auth-userdb { group = Debian-exim mode = 0600 user = Debian-exim } } service imap-login { client_limit = 256 process_limit = 128 process_min_avail = 3 service_count = 1 } service imap { drop_priv_before_exec = yes process_limit = 256 vsz_limit = 256 B } service pop3-login { client_limit = 256 process_limit = 128 process_min_avail = 3 service_count = 1 } service pop3 { drop_priv_before_exec = yes process_limit = 256 vsz_limit = 256 B } ssl_cert = </usr/local/etc/dovecot.crt ssl_key = </usr/local/etc/dovecot.key userdb { args = /usr/local/etc/dovecot-sql.conf driver = sql } protocol imap { mail_max_userip_connections = 10 mail_plugins = " notify quota imap_quota mail_log lazy_expunge" } protocol pop3 { mail_max_userip_connections = 3 mail_plugins = " notify quota mail_log" pop3_uidl_format = %08Xu%08Xv } protocol lda { mail_plugins = quota sieve postmaster_address = postmaster(a)securitylabs.it } My /usr/local/var/run/dovecot directory: 4 drwxr-sr-x 4 root staff 4096 Nov 9 17:08 . 4 drwxrwsrwx 3 root staff 4096 Nov 9 17:05 .. 0 srw------- 1 root staff 0 Nov 9 17:05 anvil 0 srw------- 1 root staff 0 Nov 9 17:05 anvil-auth-penalty 0 srw------- 1 root staff 0 Nov 9 17:05 auth-client 0 srw------- 1 dovecot staff 0 Nov 9 17:05 auth-login 0 srw------- 1 root staff 0 Nov 9 17:05 auth-master 0 srw------- 1 Debian-exim Debian-exim 0 Nov 9 17:05 auth-userdb 0 srw------- 1 dovecot staff 0 Nov 9 17:05 auth-worker 0 srw------- 1 root staff 0 Nov 9 17:05 config 0 srw------- 1 root staff 0 Nov 9 17:05 dict 0 srw------- 1 root staff 0 Nov 9 17:05 director-admin 0 srw-rw-rw- 1 root staff 0 Nov 9 17:05 dns-client 0 srw------- 1 root staff 0 Nov 9 17:05 doveadm-server 0 lrwxrwxrwx 1 root staff 35 Nov 9 17:05 dovecot.conf -> /usr/local/etc/dovecot/dovecot.conf 4 drwxr-xr-x 2 root root 4096 Nov 9 17:05 empty 4 drwxr-x--- 2 root dovenull 4096 Nov 9 17:05 login My emails are delivered as user Debian-exim and users are virtual in a MySQL DB. This system is behind a proxy (so the master user)

3 2

Bug: Logout counters reset after recreating hibernated process
by Eirik Rye 12 Mar '25

12 Mar '25

Hello, # dovecot --version 2.3.20 (80a5ac675d) When using hibernation (`imap_hibernate_timeout = 10s`), counters such as deleted/expunged messages, appear to be reset after the user process is recreated. Steps to reproduce: 1. Configure IMAP hibernation 2. Login with IMAP client 3. Delete+expunge a message 4. IDLE, and wait 10s for process to be hibernated 5. Unhibernate process (`DONE`), and log out 6. Observe the logged line: 2023-09-05T17:36:26+0200 imap(<redacted>)<776933><jA2nYJ4EPdcqAVtAAADwAAutur4AAAAB>: Info: Disconnected: Logged out in=9 out=88 deleted=0 expunged=0 trashed=0 hdr_count=0 hdr_bytes=0 body_count=0 body_bytes=0 The expected output is "deleted=1 expunged=1", not "deleted=0 expunged=0". If you follow the steps above, but skip the IDLE/hibernate step, the output is as expected. Interestingly, if the client is disconnected during hibernation (without recreating the process), the output from `imap-hibernate` is still as expected: 2023-09-05T17:45:15+0200 imap-hibernate(<redacted>)<770540><0qE0gJ4Emt8qAVtAAADwAAutur4AAAAB>: Info: Disconnected: Connection closed in=97 out=1020 deleted=1 expunged=1 trashed=0 hdr_count=0 hdr_bytes=0 body_count=0 body_bytes=0 This leads me to believe the counters are lost during process recreation, not during hibernation. This is an issue as customers will often come to us asking why messages have disappeared in their inbox, or asking for help to identify which client is expunging messages. Right now, this information is lost if hibernation is used and the client is hibernated after expunging. Best regards, Eirik Rye

2 2

Migrating GMail to Dovecot using imapc
by Jan Naumann 30 Nov '24

30 Nov '24

Dear Dovecot community, I try to migrate a GMail mailbox to Dovecot using `doveadm backup -R imapc:`. Since it seems that GMail disabled the login without XOAUTH2, I cannot figure out how to authenticate dovecot to GMail. Could you point me in the right direction? Thank you in advance! Best regards, Jan Here the commands and config I am using: # dovecot --version 2.3.19.1 (9b53102964) # doveadm -D -c gmail.conf backup -R -u user-gmail imapc: # cat gmail.conf !include /etc/dovecot/dovecot.conf imapc_host=imap.gmail.com imapc_port=993 imapc_ssl=imaps imapc_features=rfc822.size fetch-headers gmail-migration mail_prefetch_count=20 imapc_sasl_mechanisms=XOAUTH2 OAUTHBEARER PLAIN rawlog_dir = /tmp/rawlog imapc_rawlog_dir = /tmp/rawlog imapc_user=user(a)googlemail.com imapc_password=pw # cat /tmp/rawlog/20241118-114553.246444.1.in 1731926753.488821 * OK Gimap ready for requests from <ip> <base64> 1731926753.503819 * CAPABILITY IMAP4rev1 UNSELECT IDLE NAMESPACE QUOTA ID XLIST CHILDREN X-GM-EXT-1 XYZZY SASL-IR AUTH=XOAUTH2 AUTH=PLAIN AUTH=PLAIN-CLIENTTOKEN AUTH=OAUTHBEARER 1731926753.503819 1 OK Thats all she wrote! <base64> 1731926753.806967 + <base64> # cat /tmp/rawlog/20241118-114553.246444.1.out 1731926753.488935 1 CAPABILITY 1731926753.504048 2 AUTHENTICATE XOAUTH2 <base64>

14 51

dovecot, virtiofs, fchown, invalid argument
by Кирилл Шигапов 29 Nov '24

29 Nov '24

Hello! Dovecot version: 2.3.16 (7e2e900c1a) dovecon -n deliver_log_format = from=%{from}, envelope_sender=%{from_envelope}, > subject=%{subject}, msgid=%m, size=%{size}, > delivery_time=%{delivery_time}ms, %$ > dict { > acl = mysql:/etc/dovecot/dovecot-share-folder.conf > lastlogin = mysql:/etc/dovecot/dovecot-last-login.conf > quotadict = mysql:/etc/dovecot/dovecot-used-quota.conf > } > first_valid_uid = 2000 > last_valid_uid = 2000 > listen = * [::] > lock_method = dotlock > login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c > %k session=<%{session}> > mail_gid = 2000 > mail_location = maildir:%Lh/Maildir/:INDEX=%Lh/Maildir/ > mail_plugins = quota mailbox_alias acl mail_log notify > mail_uid = 2000 > managesieve_notify_capability = mailto > managesieve_sieve_capability = fileinto reject envelope encoded-character > vacation subaddress comparator-i;ascii-numeric relational regex imap4flags > copy include variables body enotify environment mailbox date index ihave > duplicate mime foreverypart extracttext > namespace { > inbox = yes > location = > mailbox Archive { > auto = no > special_use = \Archive > } > mailbox Archives { > auto = no > special_use = \Archive > } > mailbox "Deleted Messages" { > auto = no > special_use = \Trash > } > mailbox Drafts { > auto = subscribe > special_use = \Drafts > } > mailbox Junk { > auto = subscribe > special_use = \Junk > } > mailbox "Junk E-mail" { > auto = no > special_use = \Junk > } > mailbox Sent { > auto = subscribe > special_use = \Sent > } > mailbox "Sent Items" { > auto = no > special_use = \Sent > } > mailbox "Sent Messages" { > auto = no > special_use = \Sent > } > mailbox Spam { > auto = no > special_use = \Junk > } > mailbox Trash { > auto = subscribe > special_use = \Trash > } > prefix = > separator = / > type = private > } > namespace { > list = children > location = maildir:%%Lh/Maildir/:INDEX=%%Lh/Maildir/Shared/%%Ld/%%Ln > prefix = Shared/%%u/ > separator = / > subscriptions = yes > type = shared > } > passdb { > args = /etc/dovecot/dovecot-mysql.conf > driver = sql > } > passdb { > args = /etc/dovecot/dovecot-master-users > driver = passwd-file > master = yes > } > plugin { > acl = vfile > acl_shared_dict = proxy::acl > last_login_dict = proxy::lastlogin > last_login_key = # hidden, use -P to show it > mail_log_events = delete undelete expunge copy mailbox_create > mailbox_delete mailbox_rename > mail_log_fields = uid box msgid size from subject flags > mailbox_alias_new = Sent Messages > mailbox_alias_new2 = Sent Items > mailbox_alias_old = Sent > mailbox_alias_old2 = Sent > quota = dict:user::proxy::quotadict > quota_grace = 10%% > quota_status_nouser = DUNNO > quota_status_overquota = 552 5.2.2 Mailbox is full > quota_status_success = DUNNO > quota_warning = storage=100%% quota-warning 100 %u > quota_warning2 = storage=95%% quota-warning 95 %u > quota_warning3 = storage=90%% quota-warning 90 %u > quota_warning4 = storage=85%% quota-warning 85 %u > sieve = ~/sieve/dovecot.sieve > sieve_before = /var/vmail/sieve/dovecot.sieve > sieve_dir = ~/sieve > sieve_global_dir = /var/vmail/sieve > sieve_max_redirects = 30 > sieve_vacation_send_from_recipient = yes > } > protocols = pop3 imap sieve lmtp > service auth { > unix_listener /var/spool/postfix/private/dovecot-auth { > group = postfix > mode = 0666 > user = postfix > } > unix_listener auth-master { > group = vmail > mode = 0666 > user = vmail > } > unix_listener auth-userdb { > group = vmail > mode = 0660 > user = vmail > } > } > service decode2text { > executable = script /usr/libexec/dovecot/decode2text.sh > unix_listener decode2text { > mode = 0666 > } > user = dovecot > } > service dict { > unix_listener dict { > group = vmail > mode = 0660 > user = vmail > } > } > service imap-login { > process_limit = 500 > service_count = 1 > } > service indexer-worker { > process_limit = 0 > vsz_limit = 2 G > } > service lmtp { > executable = lmtp -L > inet_listener lmtp { > address = 127.0.0.1 > port = 24 > } > process_min_avail = 5 > unix_listener /var/spool/postfix/private/dovecot-lmtp { > group = postfix > mode = 0600 > user = postfix > } > user = vmail > } > service managesieve-login { > inet_listener sieve { > address = 127.0.0.1 > port = 4190 > } > } > service pop3-login { > service_count = 1 > } > service quota-status { > client_limit = 1 > executable = quota-status -p postfix > inet_listener { > address = 127.0.0.1 > port = 12340 > } > } > service quota-warning { > executable = script /usr/local/bin/dovecot-quota-warning.sh > unix_listener quota-warning { > group = vmail > mode = 0660 > user = vmail > } > } > service stats { > fifo_listener stats-mail { > group = vmail > mode = 0664 > user = vmail > } > inet_listener { > address = 127.0.0.1 > port = 24242 > } > unix_listener stats-writer { > group = vmail > mode = 0660 > user = vmail > } > } > ssl = required > ssl_cert = </etc/pki/tls/certs/iRedMail.crt > ssl_cipher_list = EECDH+CHACHA20:EECDH+AESGCM:EDH+AESGCM:AES256+EECDH > ssl_dh = # hidden, use -P to show it > ssl_key = # hidden, use -P to show it > ssl_prefer_server_ciphers = yes > syslog_facility = local5 > userdb { > args = /etc/dovecot/dovecot-mysql.conf > driver = sql > } > protocol lda { > lda_mailbox_autocreate = yes > lda_mailbox_autosubscribe = yes > mail_plugins = quota mailbox_alias acl mail_log notify sieve last_login > } > protocol lmtp { > lmtp_save_to_detail_mailbox = yes > mail_plugins = quota mailbox_alias acl mail_log notify sieve last_login > recipient_delimiter = + > } > protocol imap { > imap_client_workarounds = tb-extra-mailbox-sep > mail_max_userip_connections = 30 > mail_plugins = quota mailbox_alias acl mail_log notify imap_quota > imap_acl last_login > } > protocol pop3 { > mail_max_userip_connections = 30 > mail_plugins = quota mailbox_alias acl mail_log notify last_login > pop3_client_workarounds = outlook-no-nuls oe-ns-eoh > pop3_uidl_format = %08Xu%08Xv > } We are using virtiofs share mounted to /var/vmail When dovecot tries to make a directory structure, it fails with error - fchown: Invalid argument strace doveadm mailbox create -u testuser(a)testdomain.com Trash ... mkdir("/var/vmail/vmail1/ testdomain.com/t/e/s/testuser-2024.11.25.12.58.50//Maildir/.Trash", 0700) = 0 umask(077) = 000 openat(AT_FDCWD, "/var/vmail/vmail1/ testdomain.com/t/e/s/testuser-2024.11.25.12.58.50//Maildir/.Trash", O_RDONLY) = 11 fchown(11, -1, -1) = -1 EINVAL (Invalid argument) close(11) = 0 rmdir("/var/vmail/vmail1/ testdomain.com/t/e/s/testuser-2024.11.25.12.58.50//Maildir/.Trash") = 0 ... So there is no permission issue, directory successfully created. It seems that virtiofs not allowing uid=-1 and gid=-1 I write a small C program for testing. And when using fchown($FileDescriptor, 2000, 2000) there is no error. I can't find a way to tell dovecot to use uid & gid 2000 when he tries to do fchown. If I create a directory structure manually, everything works well. Maybe we can make some parameter in config, telling that we are using virtiofs and skip EINVAL when doing fchown...

3 3

Auth timeout after reload
by rudolf＠padaru.de 29 Nov '24

29 Nov '24

Hello everyone, I have a Dovecot running and can often observe that the auth process goes wrong if a reload occurs at the moment of authentication. I have installed dovecot 2.3.21.1 on ubuntu 20. Whether the error also occurs under other versions, I cannot say at the moment. I have included three examples from the mail log: ## start logs ## # 1 # Nov 27 11:28:18 <myServer> dovecot[946292]: auth: Debug: sql(<myUser>,<myIP>,<I1eibOInIOW5zIKi>): Finished passdb lookup Nov 27 11:28:18 <myServer> dovecot[946292]: auth: Debug: auth(<myUser>,<myIP>,<I1eibOInIOW5zIKi>): Auth request finished Nov 27 11:30:49 <myServer> dovecot[946292]: auth: Error: plain(<myUser>,<myIP>,<I1eibOInIOW5zIKi>): Request 946296.13397 timed out after 151 secs, state=3 Nov 27 11:28:18 <myServer> systemd[1]: Reloading Dovecot IMAP/POP3 email server. # 2 # Nov 27 09:05:08 <myServer> dovecot[2940195]: auth: Debug: auth(<myUser><myIP>,<nK2cbOAnaMGiIdFS>): Auth request finished Nov 27 09:07:38 <myServer> dovecot[2940195]: auth: Error: plain(<myUser>,<myIP>,<nK2cbOAnaMGiIdFS>): Request 2940206.363 timed out after 150 secs, state=3 Nov 27 09:05:07 <myServer> systemd[1]: Reloading Dovecot IMAP/POP3 email server. # 3 # Nov 27 10:02:18 <myServer> dovecot[3736041]: auth: Debug: auth(<myUser><myIP>,<1v4HOeEnWtG5zIKi>): Auth request finished Nov 27 10:04:48 <myServer> dovecot[3736041]: auth: Error: plain(<myUser>,<myIP>,<1v4HOeEnWtG5zIKi>): Request 3736048.4962 timed out after 150 secs, state=3 Nov 27 10:02:18 <myServer> systemd[1]: Reloading Dovecot IMAP/POP3 email server. ## end logs ## You can clearly see that the sql query works, but then the auth-worker seems to hang. I suspect that the auth-worker sends the request to the DB, receives the response and is then killed before it can log in the user via imap. This then leads to some users not being able to log in for a long time. I write many configs on the server automatically, then I always run a reload so that the changed config is accepted. Is this a bug or do I have to change something in my setup? [Logo]<https://www.padaru.de/> Pascal Rudolf | Geschäftsführer PADARU-IT | Oppacher Straße 40 | 02689 Wehrsdorf @: rudolf(a)padaru.de | www: padaru.de<https://padaru.de/> mobil: +49 (0) 17 772 595 32

1 0

Error: Mailbox INBOX: open, missing +r perm
by drinaldi＠trustitalia.it 29 Nov '24

29 Nov '24

Hi Guys, Since few weeks, our email server based on Dovecot and Postfix has been returning this error with some users without any changes made to the configuration: mailserver dovecot: imap(user)<1115049><sEfO8d8nm/1dIlwX>: Error: Mailbox INBOX: open(/mnt/mail-storage/user/Maildir/cur/1732656368.M835097P860226.mailserver,S=43548,W=44150:2,) failed: Permission denied (euid=501(vmail) egid=501(vmail) missing +r perm: /mnt/mail-storage/user/Maildir/cur/1732656368.M835097P860226.mailserver,S=43548,W=44150:2, stat(/mnt/mail-storage/user/Maildir/cur/1732656368.M835097P860226.mailserver,S=43548,W=44150:2,) failed: Permission denied) mailserver dovecot: imap(user)<1115049><sEfO8d8nm/1dIlwX>: Disconnected: FETCH failed: Mailbox INBOX: open(/mnt/mail-storage/user/Maildir/cur/1732656368.M835097P860226.mailserver,S=43548,W=44150:2,) failed: Permission denied (euid=501(vmail) egid=501(vmail) missing +r perm: /mnt/mail-storage/user/Maildir/cur/1732656368.M835097P860226.mailserver,S=43548,W=44150:2, stat(/mnt/mail-storage/user/Maildir/cur/1732656368.M835097P860226.mailserver,S=43548,W=44150:2,) failed: Permission denied) in=429 out=24093 deleted=0 expunged=0 trashed=0 hdr_count=2 hdr_bytes=6437 body_count=0 body_bytes=0 This is the stat of the file after reboot the server: stat 1732656368.M835097P860226.ganimede,S=43548,W=44150:2, File: 1732656368.M835097P860226.ganimede,S=43548,W=44150:2, Size: 43548 Blocks: 88 IO Block: 262144 regular file Device: 0,41 Inode: 2155401218 Links: 1 Access: (0600/-rw-------) Uid: ( 501/ vmail) Gid: ( 501/ vmail) Access: 2024-11-26 22:26:09.925862755 +0100 Modify: 2024-11-26 22:26:10.005861434 +0100 Change: 2024-11-26 22:26:11.175842122 +0100 Birth: - The strange thing is that the issue seems to this impact only some Users and looks like the error disappear after restarting the server, and reappear few time later. Dovecot -n: # 2.3.19.1 (9b53102964): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.19 (4eae2f79) # OS: Linux 6.1.0-26-amd64 x86_64 Debian 12.7 auth_mechanisms = plain login default_vsz_limit = 1 G doveadm_password = # hidden, use -P to show it doveadm_port = 12345 mail_gid = 501 mail_location = maildir:~/Maildir:INDEX=/var/indexes/%n mail_max_userip_connections = 50 mail_plugins = " notify replication zlib" mail_privileged_group = vmail mail_uid = 501 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext vacation-seconds imapflags notify namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox "Posta inviata" { special_use = \Sent } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } plugin { mail_replica = tcp:192.168.3.250 sieve = file:/var/www/html/ooo/%n;active=/var/www/html/ooo/%n/script sieve_default = /var/www/html/ooo/default.sieve sieve_duplicate_default_period = 14d sieve_duplicate_max_period = 7d sieve_extensions = +duplicate +notify +imapflags +vacation-seconds sieve_user_log = /var/www/html/ooo/%n/sieve_error.log } protocols = " imap lmtp sieve pop3" replication_max_conns = 2 service aggregator { fifo_listener replication-notify-fifo { user = vmail } unix_listener replication-notify { user = vmail } } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { group = vmail mode = 0660 user = vmail } } service doveadm { inet_listener { port = 12345 } } service imap-login { process_limit = 200 } service imap { vsz_limit = 1 G } service lmtp { process_min_avail = 5 unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } user = vmail } service managesieve-login { inet_listener sieve { port = 4190 } process_min_avail = 10 service_count = 1 } service replicator { process_min_avail = 1 unix_listener replicator-doveadm { mode = 0666 user = vmail } } service stats { unix_listener stats-reader { group = vmail mode = 0666 user = vmail } unix_listener stats-writer { group = vmail mode = 0666 user = vmail } } ssl_cert = </etc/dovecot/private/chain-star_trustitalia_it.pem ssl_cipher_list = ALL:!LOW:!aNULL:!eNULL:!SSLv2:!RC4:!MD5:!DES:!EXP:!SEED:!IDEA:!3DES ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it userdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } protocol lmtp { mail_plugins = " notify replication zlib sieve quota zlib" postmaster_address = postmaster(a)trustitalia.it } protocol lda { auth_socket_path = /var/run/dovecot/auth-master hostname = ganimede.trustitalia.it mail_plugins = " notify replication zlib sieve quota zlib" } protocol imap { mail_plugins = " notify replication zlib zlib" } protocol sieve { mail_max_userip_connections = 10 managesieve_implementation_string = Dovecot Pigeonhole managesieve_logout_format = bytes=%i/%o managesieve_max_compile_errors = 5 managesieve_max_line_length = 64 k } protocol pop3 { mail_plugins = " notify replication zlib zlib" } Thanks

2 2

"INBOX can't be deleted" error when syncing from imapc
by Andy Balholm 28 Nov '24

28 Nov '24

I'm syncing mail from an IMAP server to local Maildirs with `doveadm backup -R`, and I sometimes get an error the second time I sync an account: > Mailbox INBOX sync: mailbox_delete failed: INBOX can't be deleted. I've figured out that the sync completes the first time without an error, but the UIDVALIDITY of the INBOX Maildir doesn't match the UIDVALIDITY on the IMAP server. Then the second time doveadm detects the mismatch and wants to delete the INBOX, but it can't because Maildir INBOXes can't be deleted. So I think the root cause is that the INBOX is being created with the wrong UIDVALIDITY in the first place. It only seems to happen when there are no messages in the INBOX on the server at the time the Maildir is created, but it doesn't seem to happen all the time. Is there anything I can do to make the sync job run smoothly? Andy

1 0

Director to keep redirecting users to the same server even it is down
by abdelhaq.jalboush＠gmail.com 28 Nov '24

28 Nov '24

Hello, why the director always proxying IMAP connections to the same backend even if it is down? Also the director is showing the node as up although I have stopped the dovecot service on it: doveadm director status mail server ip tag vhosts state state changed users Node1 100 up - 2 Node2 100 up - 3 on the director here is: doveconf -n # 2.3.21 (47349e2482): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.21 (f6cd4b8e) # OS: Linux 6.8.0-1018-aws x86_64 Ubuntu 24.04.1 LTS # Hostname: auth_debug = yes auth_debug_passwords = yes auth_mechanisms = plain login auth_socket_path = director-userdb auth_verbose = yes director_mail_servers = Node1 Node2 director_servers = dir1 dir2 info_log_path = /var/log/dovecot.log listen = * lmtp_proxy = yes log_path = /var/log/dovecot.log mail_gid = vmail mail_privileged_group = mail mail_uid = vmail namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-openldap-proxy.conf.ext default_fields = proxy=y driver = ldap } protocols = imap pop3 lmtp service auth { inet_listener { port = 12345 } } service director { fifo_listener login/proxy-notify { mode = 0600 user = $default_login_user } inet_listener { port = 9090 } unix_listener director-admin { mode = 0600 } unix_listener director-userdb { mode = 0600 } unix_listener login/director { mode = 0666 } } service imap-login { executable = imap-login director inet_listener imap { port = 0 } inet_listener imaps { port = 993 ssl = yes } } service ipc { unix_listener ipc { user = dovecot } } service lmtp { inet_listener lmtp { port = 24 } } service pop3-login { executable = pop3-login director inet_listener pop3 { port = 0 } inet_listener pop3s { port = 995 ssl = yes } } service submission-login { inet_listener submission { port = 587 } } ssl_cert = </etc/dovecot/ssl/fullchain.pem ssl_client_ca_dir = /etc/ssl/certs ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it protocol lmtp { auth_socket_path = director-userdb }

3 2