May 2024 - dovecot - dovecot.org

Pigeonhole Sieve only runs scripts if in users' home directories, or if Sieve is purposely broken
by Douglas Morse 15 May '24

15 May '24

Hi, Dovecot version is 2.3.19.1 (9b53102964) running on fully up-to-date Debian 12 (Bookworm) operating system. For the life of me I cannot figure out how to get sieve scripts working correctly in a central directory location. Calling them from users’ home directories works fine (as described below). (Note: This system has recently been migrated from Cyrus IMAP, so some of the directories for a central location are very similar to what would find in a standard Cyrus IMAP installation.) If I set `sieve` to its default value of `file:~/sieve;active=~/.dovecot.sieve` in `conf.d/90-sieve.conf`, sieve works as expected. I have a file `~/sieve/default.sieve` and, as per documentation, I make a symbolic link `~/.dovecot.sieve` that points to that file. The sieve script runs, and I see a `default.svbin` either created or updated in the ~/sieve directories as emails arrive. Setting `sieve` to `file:~/lib/sieve;active=~/.dovecot.sieve` also works as expected. So this verifies I can change the directory where sieve scripts are stored. However, if I then set `sieve` to `file:/var/spool/dovecot/home/%1n/user/%n/sieve;active=file:/var/spool/dovecot/home/%1n/user/%n/.dovecot.sieve`, again a `default.sieve` in each of these user’s centralized `sieve` directories, sieve scripts silently fail to run. No messages of any kind found in any log files. So, with the same exact same configuration as one that is the default and as proven to working, with the single exception of changing the top-level directory (TLD) for the scripts, results in silent failure. Why? What I find particularly odd is that if I keep `sieve` set to this central directory location (i.e., no config changes), and `mv sieve/default.sieve sieve.tmp; rmdir sieve; mv sieve.tmp`, that is, have a *file* called `sieve` where the setting `sieve` points to (which, per docs and experience, should be a *directory*), the users’ sieve scripts *do* run, but with a warning along the lines of `Warning: sieve: file storage: Explicitly specified active script path `file:/var/spool/dovecot/home/m/user/morse/.dovecot.sieve' is ignored; storage path `/var/spool/dovecot/home/m/user/morse/sieve' is not a directory`. In the docs I see that `sieve` used to refer to a file (PidgeonHole Sieve v.0.31 or prior, I believe), and there is mention of a a `sieve_dir` setting (which I have *never* set or used). So my guess is that sieve working in this centralized TLD with `sieve` as a file rather than directory is due to support for some deprecated config / functionality. I have fiddle around with this for some hours, including setting and not setting `mail_home` to the central directory location (i.e., `mail_home` in `conf.d/10-mail.conf` set to the same value as `sieve` in `conf.d/90-sieve.conf`),to no avail. No matter what I do, I cannot get sieve scripts to run in a centralized directory location as they do under `/home`. The only exception is as just described in the preceding paragraph. But the solution only allows a user to have a single sieve script, and I imagine `managesieve` will not work properly is sieve is set up as described in the preceding paragraph. What am I missing or doing incorrectly? Any and all assistance most appreciated. Doug

2 3

lda-dupes-file not updated, when user over quota and sieve vacation enabled
by Christian Rößner 14 May '24

14 May '24

Hi, we have encountered an interesting behavior with users that have their mailboxes over quota while having sieve-vacation enabled. We do a temp fail, if a mailbox is over quota. Problem: -------- If a remote sender sends an email to such a user (over quota + vacation), Dovecot directly creates a response message and sends it back to the sender. So far so good. At the same time the original email cannot be stored in the users INBOX, which leads to a temp fail action. Now the email remains in a queue and whenever the queue manager tries to deliver the email again, the behavior starts again. Send vacation response and temp fail, until either the queue life time exceeds or the user has cleaned up his/her mailbox and the message can be stored. For the remote sender it means getting lots of vacation emails from the same recipient. For each retry one vacation message. Tracing: -------- We dig a little bit deeper and turned on logging to see what happens. Because the email cannot be put into the users INBOX, it keeps in a failure state. And because of this, the dupes-file is not updated for this particular sender. We are not sure, if this is a wanted behavior or not. But for a sender, it is really annoying to receive vacation messages on and on. Solution: --------- Unfortunately we could not find any settings to change this. So I come here and ask for your kindly help. At the moment of this writing I can not provide a doveconf -n output, but I hope you trust me that we have not done too many things wrong ;-) Christian Rößner -- Rößner-Network-Solutions Zertifizierter ITSiBe / CISO Karl-Bröger-Str. 10, 36304 Alsfeld Fax: +49 6631 78823409, Mobil: +49 171 9905345 USt-IdNr.: DE225643613, https://roessner.website PGP fingerprint: 658D 1342 B762 F484 2DDF 1E88 38A5 4346 D727 94E5

1 0

sieve duplicate with 2.3.16
by Jean-Max Reymond 13 May '24

13 May '24

Hi, I was running dovecot 2.3.7.2 with ubuntu 20.04 Lastweek, I upgrade to Ubuntu 22.04 and dovecot 2.3.16 My configuration was migrated and all is fine expected the sieve duplicate. It does notwork and i don't understand why. % doveconf -n # 2.3.16 (7e2e900c1a): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.16 (09c29328) managesieve(ubuntu): Debug: sieve: Pigeonhole version 0.5.16 (09c29328) initializing managesieve(ubuntu): Debug: sieve: include: sieve_global is not set; it is currently not possible to include `:global' scripts. # OS: Linux 5.15.0-105-generic x86_64 Ubuntu 22.04.4 LTS ext4 # Hostname: 2D17911.online-server.cloud auth_mechanisms = plain login first_valid_uid = 8 log_debug = category=sieve mail_fsync = never mail_location = maildir:/home/Mails/%u managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { sieve = ~/.dovecot.sieve sieve_before = /var/lib/dovecot/sieve/default.sieve sieve_dir = ~/sieve } postmaster_address = postmaster(a)ckr-solutions.com protocols = imap sieve service auth { unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } } service stats { unix_listener stats-writer { mode = 0666 } } ssl_cert = </etc/letsencrypt/live/mail.ckr-solutions.com/fullchain.pem ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM ssl_key = # hidden, use -P to show it userdb { driver = passwd } userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol imap { imap_client_workarounds = delay-newmail mail_max_userip_connections = 10 } protocol lmtp { mail_fsync = optimized } protocol lda { deliver_log_format = msgid=%m: %$ mail_fsync = optimized mail_plugins = sieve postmaster_address = postmaster(a)ckr-solutions.com quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r } protocol pop3 { mail_max_userip_connections = 10 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } trace dovecot for debug May 9 12:04:49 2D17911 postfix/qmgr[1855785]: DE15D396023E: from=<jmreymond(a)ik.me>, size=2313, nrcpt=3 (queue active) May 9 12:04:50 2D17911 amavis[2290921]: (2290921-01) Passed CLEAN {RelayedOpenRelay}, [185.125.25.11]:58641 [185.125.25.11] <jmreymond(a)ik.me> -> <jmreymond(a)ckr-solutions.com>,<testsieve(a)ckr-solutions.com>, Queue-ID: 91D2E3960097, Message-ID: <00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>, mail_id: lukXw6VSEsMW, Hits: -2.821, size: 1854, queued_as: DE15D396023E, dkim_sd=20200325:ik.me, 5242 ms May 9 12:04:50 2D17911 postfix/smtp[2292055]: 91D2E3960097: to=<jmreymond(a)ckr-solutions.com>, orig_to=<testsieve(a)ckr-solutions.com>, relay=127.0.0.1[127.0.0.1]:10024, delay=5.4, delays=0.16/0.01/0.09/5.2, dsn=2.0.0, status=sent (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as DE15D396023E) May 9 12:04:50 2D17911 postfix/smtp[2292055]: 91D2E3960097: to=<testsieve(a)ckr-solutions.com>, relay=127.0.0.1[127.0.0.1]:10024, delay=5.4, delays=0.16/0.01/0.09/5.2, dsn=2.0.0, status=sent (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as DE15D396023E) May 9 12:04:50 2D17911 postfix/qmgr[1855785]: 91D2E3960097: removed May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: Pigeonhole version 0.5.16 (09c29328) initializing May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: include: sieve_global is not set; it is currently not possible to include `:global' scripts. May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: file storage: Using active Sieve script path: /home/Mails/jmreymond(a)ckr-solutions.com/.dovecot.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: file storage: Using script storage path: /home/Mails/jmreymond(a)ckr-solutions.com//sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: file storage: Relative path to sieve storage in active link: sieve/ May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: file storage: Using Sieve script path: /home/Mails/jmreymond(a)ckr-solutions.com/.dovecot.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: file storage: Storage path `/home/Mails/jmreymond(a)ckr-solutions.com/.dovecot.sieve' not found May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: User has no active script in storage `/home/Mails/jmreymond(a)ckr-solutions.com/sieve' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: User has no personal script May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: file storage: Using Sieve script path: /var/lib/dovecot/sieve/default.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: file storage: script: Opened script `default' from `/var/lib/dovecot/sieve/default.sieve' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: Executed before user's personal Sieve script(1): /var/lib/dovecot/sieve/default.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: multi-script: Start execute sequence May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: Opening script 1 of 1 from `/var/lib/dovecot/sieve/default.sieve' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: Loading script /var/lib/dovecot/sieve/default.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: Script binary /var/lib/dovecot/sieve/default.svbin successfully loaded May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: binary /var/lib/dovecot/sieve/default.svbin: save: not saving binary, because it is already stored May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: Executing script from `/var/lib/dovecot/sieve/default.svbin' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: multi-script: Run script `/var/lib/dovecot/sieve/default.svbin' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: Started running script `/var/lib/dovecot/sieve/default.svbin' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: Finished running script `ok' (status=/var/lib/dovecot/sieve/default.svbin, resource usage: no usage recorded) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: multi-script: Execute result May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing result (status=ok, commit=no) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Starting execution of actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing duplicate_mark action (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing actions (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing result (no commit, status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: multi-script: Sequence active May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: multi-script: Finishing sequence (status=ok) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing result (status=ok, commit=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Starting execution of actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing actions (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Execute implicit keep (failure=no) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Start storing into mailbox INBOX May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing implicit keep action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Execute storing into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: Pigeonhole version 0.5.16 (09c29328) initializing May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: include: sieve_global is not set; it is currently not possible to include `:global' scripts. May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: file storage: Storage path `/home/Mails/testsieve(a)ckr-solutions.com//sieve' not found May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: file storage: Using Sieve script path: /home/Mails/testsieve(a)ckr-solutions.com/.dovecot.sieve May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: file storage: Storage path `/home/Mails/testsieve(a)ckr-solutions.com/.dovecot.sieve' not found May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: storage: No default script location configured May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: User has no personal script May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: file storage: Using Sieve script path: /var/lib/dovecot/sieve/default.sieve May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: file storage: script: Opened script `default' from `/var/lib/dovecot/sieve/default.sieve' May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: Executed before user's personal Sieve script(1): /var/lib/dovecot/sieve/default.sieve May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: multi-script: Start execute sequence May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: Opening script 1 of 1 from `/var/lib/dovecot/sieve/default.sieve' May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: Loading script /var/lib/dovecot/sieve/default.sieve May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: Script binary /var/lib/dovecot/sieve/default.svbin successfully loaded May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: binary /var/lib/dovecot/sieve/default.svbin: save: not saving binary, because it is already stored May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: Executing script from `/var/lib/dovecot/sieve/default.svbin' May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: multi-script: Run script `/var/lib/dovecot/sieve/default.svbin' May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: Started running script `/var/lib/dovecot/sieve/default.svbin' May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: Finished running script `ok' (status=/var/lib/dovecot/sieve/default.svbin, resource usage: no usage recorded) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: multi-script: Execute result May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing result (status=ok, commit=no) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Starting execution of actions May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing actions May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing duplicate_mark action (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing actions (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing result (no commit, status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: multi-script: Sequence active May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: multi-script: Finishing sequence (status=ok) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing result (status=ok, commit=yes) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Starting execution of actions May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing actions May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing actions (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Execute implicit keep (failure=no) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Start storing into mailbox INBOX May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing implicit keep action May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Execute storing into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: Pigeonhole version 0.5.16 (09c29328) initializing May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: include: sieve_global is not set; it is currently not possible to include `:global' scripts. May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: file storage: Using active Sieve script path: /home/Mails/jmreymond(a)ckr-solutions.com/.dovecot.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: file storage: Using script storage path: /home/Mails/jmreymond(a)ckr-solutions.com//sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: file storage: Relative path to sieve storage in active link: sieve/ May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: file storage: Using Sieve script path: /home/Mails/jmreymond(a)ckr-solutions.com/.dovecot.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: file storage: Storage path `/home/Mails/jmreymond(a)ckr-solutions.com/.dovecot.sieve' not found May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: User has no active script in storage `/home/Mails/jmreymond(a)ckr-solutions.com/sieve' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: User has no personal script May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: file storage: Using Sieve script path: /var/lib/dovecot/sieve/default.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: file storage: script: Opened script `default' from `/var/lib/dovecot/sieve/default.sieve' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: Executed before user's personal Sieve script(1): /var/lib/dovecot/sieve/default.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: multi-script: Start execute sequence May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: Opening script 1 of 1 from `/var/lib/dovecot/sieve/default.sieve' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: Loading script /var/lib/dovecot/sieve/default.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: Script binary /var/lib/dovecot/sieve/default.svbin successfully loaded May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: binary /var/lib/dovecot/sieve/default.svbin: save: not saving binary, because it is already stored May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: Executing script from `/var/lib/dovecot/sieve/default.svbin' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: multi-script: Run script `/var/lib/dovecot/sieve/default.svbin' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: Started running script `/var/lib/dovecot/sieve/default.svbin' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: Finished running script `ok' (status=/var/lib/dovecot/sieve/default.svbin, resource usage: no usage recorded) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: multi-script: Execute result May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing result (status=ok, commit=no) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Starting execution of actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing duplicate_mark action (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing actions (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing result (no commit, status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: multi-script: Sequence active May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: multi-script: Finishing sequence (status=ok) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing result (status=ok, commit=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Starting execution of actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing actions (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Execute implicit keep (failure=no) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Start storing into mailbox INBOX May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing implicit keep action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Execute storing into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Saving to mailbox 'INBOX' successful so far May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing implicit keep action (status=ok) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalizing actions May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalize duplicate_mark action (status=ok, action_status=ok, commit_status=ok, pre-commit=yes) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Commit duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished finalizing actions (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalize implicit keep (failure=no) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalize implicit keep action(status=ok, action_status=ok, commit_status=ok) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Commit implicit keep action May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Commit storing into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Saving to mailbox 'INBOX' successful so far May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Saving to mailbox 'INBOX' successful so far May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing implicit keep action (status=ok) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing implicit keep action (status=ok) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalizing actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalizing actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalize duplicate_mark action (status=ok, action_status=ok, commit_status=ok, pre-commit=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalize duplicate_mark action (status=ok, action_status=ok, commit_status=ok, pre-commit=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Commit duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Commit duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished finalizing actions (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished finalizing actions (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalize implicit keep (failure=no) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalize implicit keep (failure=no) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalize implicit keep action(status=ok, action_status=ok, commit_status=ok) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalize implicit keep action(status=ok, action_status=ok, commit_status=ok) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Commit implicit keep action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Commit implicit keep action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Commit storing into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Commit storing into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: stored mail into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finish implicit keep action May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finishing actions May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finish duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing result (final, status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: multi-script: Sequence finished (status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: multi-script: Destroy May 9 12:04:50 2D17911 postfix/pipe[2292073]: DE15D396023E: to=<testsieve(a)ckr-solutions.com>, relay=dovecot, delay=0.23, delays=0.09/0.01/0/0.13, dsn=2.0.0, status=sent (delivered via dovecot service) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: stored mail into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finish implicit keep action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finishing actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finish duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing result (final, status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: multi-script: Sequence finished (status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: multi-script: Destroy May 9 12:04:50 2D17911 postfix/pipe[2292072]: DE15D396023E: to=<jmreymond(a)ckr-solutions.com>, relay=dovecot, delay=0.31, delays=0.09/0.01/0/0.22, dsn=2.0.0, status=sent (delivered via dovecot service) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: stored mail into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finish implicit keep action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finishing actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finish duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing result (final, status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: multi-script: Sequence finished (status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: multi-script: Destroy May 9 12:04:50 2D17911 postfix/pipe[2292075]: DE15D396023E: to=<jmreymond(a)ckr-solutions.com>, orig_to=<testsieve(a)ckr-solutions.com>, relay=dovecot, delay=0.35, delays=0.09/0.01/0/0.25, dsn=2.0.0, status=sent (delivered via dovecot service) May 9 12:04:50 2D17911 postfix/qmgr[1855785]: DE15D396023E: removed

1 1

Sieve: Avoiding duplicates in a folder while keeping in Inbox
by Nick Urbanik 13 May '24

13 May '24

Dear Folks, I am in the process of learning Sieve, and want to be able to keep an email in Inbox, while also keeping *one* copy in another folder. However, the same mail is copied from Inbox multiple times when I run sieve-filter -Wev .dovecot.sieve Inbox My attempt to prevent this fails: ... } elsif header :comparator "i;octet" :contains "From" "paypal(a)paypal.com.au" { if not duplicate { fileinto "paypal"; } keep; } Please can anyone enlighten me?

3 4

Re: Failing to archive many messages
by Francis Augusto Medeiros-Logeay 09 May '24

09 May '24

> On 9 May 2024, at 19:45, dovecot-request(a)dovecot.org wrote: > > Francis Augusto Medeiros-Logeay via dovecot skrev den 2024-05-09 12:29: > >>> If you want to analyze emails, why not do it with scheduled crons >>> after they are archived? > > maybe ask for skip older then one day in here > https://github.com/isbg/isbg/tree/master > > while roundcube just set the needed flag for retest ? > >> wouldn't it reanalyze all archived messages anyway? > > sometimes email is ham at recpt stage, while its spam later on test, > this is why isbg is made imho :) I see. But I wonder if there is something wrong with what I already have. It worked fine for years, and it works fine for most of my users. I tested with a few accounts, and Archving (with its sa-learn script) works blazingly fast. But with one user - happens to be mine - it is super slow when archiving, most likely due the sa-learn. Best, Francis

1 0

Authentication questions
by Francis Augusto Medeiros-Logeay 09 May '24

09 May '24

Hi, I was wondering: 1 - Is it possible to configure authentication methods per user? For example, oauth2 for most users, but plain for others? 2 - I had a feeling that when oauth2 authentication fails, dovecot tries to authenticate via plain with the received token. Doesn’t seem logical, but I get my user blocked on my directory server (freeipa) after a few failed oath authentications. If so, can this be prevented? Best, Francis

3 4

Re: Failing to archive many messages
by Francis Augusto Medeiros-Logeay 09 May '24

09 May '24

> On 9 May 2024, at 12:55, dovecot-request(a)dovecot.org wrote: > > Francis Augusto Medeiros-Logeay via dovecot skrev den 2024-05-09 11:28: > >> Actually, I don’t know here if that’s the sieve that’s slowing down the >> process, or if it is something else. >> I see that yeah, sa-learn takes a little while to execute. But maybe >> the issue is that Dovecot doesn’t seem to >> release the IMAP connection until each message went through sieve. This >> gives me some timeout on >> Roundcube (it says just «server error»). All the messages are indeed >> archived. >> >> Is that something here I could do better? > > use tmpfs to store tmp content, or try solve it without pipe with imho > creates tmp files > > https://doc.dovecot.org/configuration_manual/howto/antispam_with_sieve/ > > try spamc Thanks Benny. Using spamc and sa-learn isn’t a bit the same? But I’ll check the docs. Bestm Francis

1 0

Re: Failing to archive many messages
by Francis Augusto Medeiros-Logeay 09 May '24

09 May '24

I noticed that my sieve rules are taking a very long time when archiving messages. I can see on my logs that every message takes about two-three seconds to be evaluated. My sieve for the Archive is this: cat /var/mail/vmail/mail/sieve/global/report-ham.sieve require ["vnd.dovecot.pipe", "copy", "imapsieve", "environment", "variables"]; if environment :matches "imap.mailbox" "*" { set "mailbox" "${1}"; } if string "${mailbox}" "Trash" { stop; } if environment :matches "imap.user" "*" { set "username" "${1}"; } pipe :copy "sa-learn-ham.sh" [ "${username}" ]; And my sa-learn-ham.sh is this: #!/bin/sh export PATH="/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin:$PATH" exec /usr/bin/sa-learn -u ${1} —ham May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: multi-script: Start execute sequence May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: Executing script from `/var/mail/vmail/mail/sieve/global/report-ham.svbin' May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: multi-script: Run script `/var/mail/vmail/mail/sieve/global/report-ham.svbin' May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: Started running script `/var/mail/vmail/mail/sieve/global/report-ham.svbin' May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: Finished running script `ok' (status=/var/mail/vmail/mail/sieve/global/report-ham.svbin, resource usage: no usage recorded) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: multi-script: Execute result May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Executing result (status=ok, commit=no) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Starting execution of actions May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Executing actions May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Executing pipe action May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: action pipe: running program: sa-learn-ham.sh May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh: Created May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh: Pass environment: USER=francis(a)med-lo.eu May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh: Pass environment: HOME=/var/mail/vmail/med-lo.eu/francis May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh: Pass environment: HOST=fb58607074fd May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: Mailbox Archive: UID 191458: Opened mail because: mail stream May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Finished executing pipe action (status=ok, keep=implicit) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Finished executing actions (status=ok, keep=implicit) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Finished executing result (no commit, status=ok, keep=yes) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: multi-script: Sequence active May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: multi-script: Finishing sequence (status=ok) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Executing result (status=ok, commit=yes) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Starting execution of actions May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Executing actions May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Finished executing actions (status=ok, keep=implicit) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Execute implicit keep (failure=no) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Start storing into mailbox Archive May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Executing implicit keep action May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Execute storing into mailbox 'Archive' May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Updated existing mail in mailbox 'Archive' May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Finished executing implicit keep action (status=ok) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Finalizing actions May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Finalize pipe action (status=ok, action_status=ok, commit_status=ok, pre-commit=yes) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Commit pipe action May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh: Establishing connection May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh: Forked child process May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh (9354): Connected to program May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh (9354): Finished streaming payload to program May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh (9354): Finished input to program May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh (9354): Disconnected May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh (9354): Waiting for program to finish after 4 msecs (timeout = 9996 msecs) I also noticed this happens for a few accounts. Do you know what could be causing this? Best, Francis

3 4

sieve duplicate with 2.3.16
by Jean-Max Reymond 09 May '24

09 May '24

Hi, I was running dovecot 2.3.7.2 with ubuntu 20.04 Lastweek, I upgrade to Ubuntu 22.04 and dovecot 2.3.16 My configuration was migrated and all is fine expected the sieve duplicate. It does notwork and i don't understand why. % doveconf -n # 2.3.16 (7e2e900c1a): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.16 (09c29328) managesieve(ubuntu): Debug: sieve: Pigeonhole version 0.5.16 (09c29328) initializing managesieve(ubuntu): Debug: sieve: include: sieve_global is not set; it is currently not possible to include `:global' scripts. # OS: Linux 5.15.0-105-generic x86_64 Ubuntu 22.04.4 LTS ext4 # Hostname: 2D17911.online-server.cloud auth_mechanisms = plain login first_valid_uid = 8 log_debug = category=sieve mail_fsync = never mail_location = maildir:/home/Mails/%u managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { sieve = ~/.dovecot.sieve sieve_before = /var/lib/dovecot/sieve/default.sieve sieve_dir = ~/sieve } postmaster_address = postmaster(a)ckr-solutions.com protocols = imap sieve service auth { unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } } service stats { unix_listener stats-writer { mode = 0666 } } ssl_cert = </etc/letsencrypt/live/mail.ckr-solutions.com/fullchain.pem ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM ssl_key = # hidden, use -P to show it userdb { driver = passwd } userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol imap { imap_client_workarounds = delay-newmail mail_max_userip_connections = 10 } protocol lmtp { mail_fsync = optimized } protocol lda { deliver_log_format = msgid=%m: %$ mail_fsync = optimized mail_plugins = sieve postmaster_address = postmaster(a)ckr-solutions.com quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r } protocol pop3 { mail_max_userip_connections = 10 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } trace dovecot for debug ... May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: stored mail into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finish implicit keep action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finishing actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finish duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing result (final, status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: multi-script: Sequence finished (status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: multi-script: Destroy May 9 12:04:50 2D17911 postfix/pipe[2292075]: DE15D396023E: to=<jmreymond(a)ckr-solutions.com>, orig_to=<testsieve(a)ckr-solutions.com>, relay=dovecot, delay=0.35, delays=0.09/0.01/0/0.25, dsn=2.0.0, status=sent (delivered via dovecot service) May 9 12:04:50 2D17911 postfix/qmgr[1855785]: DE15D396023E: removed

1 0

Re: Failing to archive many messages
by Francis Augusto Medeiros-Logeay 09 May '24

09 May '24

> I noticed that my sieve rules are taking a very long time when archiving messages. I can see on my logs that every message takes about two-three seconds to be evaluated. > > I also noticed this happens for a few accounts. Do you know what could be causing this? > > Best, > Francis > Actually, I don’t know here if that’s the sieve that’s slowing down the process, or if it is something else. I see that yeah, sa-learn takes a little while to execute. But maybe the issue is that Dovecot doesn’t seem to release the IMAP connection until each message went through sieve. This gives me some timeout on Roundcube (it says just «server error»). All the messages are indeed archived. Is that something here I could do better? Best, Francis

2 1