July 2025 - dovecot - dovecot.org

Problem email client iPhone ios18.2
by andrzej.milewski＠gmail.com 08 Sep '26

08 Sep '26

Hello, I have a fairly new installation of the Dovecot server version 2.3.19.1 on Debian 12.8. In general, the server works correctly. It sends and receives emails without issues. The clients primarily use Thunderbird on desktops and Gmail on Android. However, some clients are using iPhones with various hardware versions. Those with iOS below version 18 work correctly without any issues. Those who have updated their phones to version 18 and now even 18.2 are experiencing problems with mailbox synchronization. On version 18.2, the issue appears as follows: When you open the app, you can read several messages. They load correctly, but, for instance, attachments do not. If I wait for some time, the attachment eventually loads. During this time, I observe the server logs, and it shows that a certain session on the Dovecot server has ended. Dec 17 13:13:01 iredmail0 dovecot[408]: imap(xxx(a)xxx.com)<44785><1QGZCHcp/+3AqM2O>: Disconnected: Connection closed (UID SEARCH finished 92.295 secs ago) in=2972 out=6076956 deleted=0 expunged=0 trashed=0 hdr_count=0 hdr_bytes=0 body_count=36 body_bytes=6059064 Dec 18 08:40:41 iredmail0 dovecot[408]: imap(xxx(a)xxx.com)<177412>: Disconnected: Connection closed (UID FETCH finished 90.079 secs ago) in=5126 out=1304237 deleted=0 expunged=0 trashed=0 hdr_count=94 hdr_bytes=289688 body_count=89 body_bytes=969615 Dec 18 08:42:19 iredmail0 dovecot[408]: imap(xxx(a)xxx.com)<177410><D5mqU4cpZ+nAqM2O>: Disconnected: Connection closed (UID FETCH finished 95.051 secs ago) in=4475 out=1162785 deleted=0 expunged=0 trashed=0 hdr_count=95 hdr_bytes=281674 body_count=61 body_bytes=839545 Dec 18 08:44:17 iredmail0 dovecot[408]: imap(edyta.kowalewska(a)laktopol.com.pl)<177918>: Disconnected: Connection closed (UID FETCH finished 92.132 secs ago) in=29399 out=30266644 deleted=0 expunged=0 trashed=0 hdr_count=565 hdr_bytes=1726228 body_count=628 body_bytes=28109455 After the session is closed, the attachment loads immediately. From the logs and router analysis, it appears that the download happens in another previously opened session. After this incident, I go to another message with an attachment, and the situation repeats. There are also situations where the email body does not load, and the app waits for the server until the session closes and the content is fetched in another session. It does not matter whether I connect to the server via the internet or through a local network. On an iPhone 7 with iOS 15.8.3, everything works smoothly. Attachments open without issues. On iOS 18.1.1, attachments do not load, and the session does not close on its own. It takes forever unless the app is closed. In the Gmail app, everything works correctly without any issues. This is clearly a problem with the mail client on iPhone. However, is there anything I can adjust in my server settings to mitigate this issue for users? My dovecot configuration https://pastebin.com/UPNQ5dZz

26 60

Pay Someone to Take My Online Course?
by xotawa2329＠hapincy.com 05 Sep '26

05 Sep '26

Pay Someone to Take My Online Course? Different understudies who battle with reworking school, work, and family obligations select online class tutors to assist them with finishing their tests and complete their coursework. In any case, some solicitation the ethicality of this planning. While <a href="https://onlineclassservices.com/nurs-fpx-4040-assessment-4-attempt-1-inform…">NURS FPX 4040 Assessment 4</a>  has every one of the reserves of being enticing, it goes with two or three serious dangers. This article will examine a piece of the things you ought to remember going before enlisting an online class help association. It's clearly a fact that online classes can be truly troublesome, particularly for working professionals who have a clamoring plan. Oftentimes they are searching for someone to take a whole course or individual tasks for them, to assist with managing their grades and moderate their strain. Nonetheless, be wary of affiliations that guarantee too wonderful to be authentic. They could charge you enormous totals for their associations and end up not conveying. The best technique for guaranteeing that you are getting anything that would be fair is to use an online class tutor who offers an inadequate responsibility. Additionally, review that different schools consider paying someone to take an online class to swindle. Therefore, whenever got, you could go facing silly outcomes like besieging the course, scholarly suspension or even send off. To this end picking a fair relationship with a showed history is crucial. The association is clear: present your mentioning and survey offers from qualified educated authorities. Then enlist the one that is reasonable for yourself and store maintains in <a href="https://onlineclassservices.com/nurs-fpx-4050-assessment-1-attempt-3-prelim…">NURS FPX 4050 Assessment 1</a>  scrow until your assignment is finished. Online classes are eminent among understudies who need to save time on education and spotlight more on work or other private issues. These merge understudies who are taking courses while working and attempting to change family and profession responsibilities, military understudies on sending, and understudies with genuine inadequacies or sickness that make it pursuing for them to go to classes. Unfortunately, there are many tricks that confirmation to take online courses for you. These affiliations charge ridiculous totals and don't complete their obligations. They may also hand you over to your school. Tolerating that they do, you could be killed from your underwriting project or even suspended or removed from school. This isn't the very thing that you truly need for your business and future. Therefore, you genuinely need to track down serious areas of strength for a that offers a fair cost and mind blowing results. To this end you ought to search for a <a href="https://onlineclassservices.com/nurs-fpx-4050-assessment-2-attempt-1-ethica…">NURS FPX 4050 Assessment 2</a>  affiliation that has an inadequate responsibility and splendid customer association. Various individuals decide to use a professional to take their online class since they need the opportunity to go to it very close. They could be working the whole day, supervising family issues, or fighting disease and disappointments that log jam their review tendencies. These professionals can assist you with fulfilling time necessities, stay away from imaginative theft, and set free your nights to zero in on work or other unwinding works out. They may comparatively have the decision to help you with beating any learning handicaps you have. Copyright infringement suggests utilizing someone else's words and thoughts without their endorsement. It is viewed as a kind of cheating and can accomplish a delicate grade or even send off from school. It is difficult to ensure that a used professional won't phony. This is on the grounds that educational foundations don't have <a href="https://onlineclassservices.com/nurs-fpx-4900-assessment-1-assessing-the-pr…">NURS FPX 4900 Assessment 1 Assessing the Problem</a>  assets for check whether understudies are authentic or not. This truly expects that tolerant you are gotten, you will probably lose the cash you paid to have someone take your class. There's no veritable strategy for remaining caution assuming the solitary you enroll to take your online course will tell the truth and dependable. They probably won't be in a tantamount state as you. Moreover, they apparently won't be as dedicated to finishing the class for you as you are. They may very well be doing the base extent of work expected to get reviewed and a brief time frame later vanish. MORE <a href="https://dev.gajim.org/gajim/website/-/issues/35#note_211778">Facebook is a powerful tool for business</a> <a href="https://xtremepape.rs/members/horridhenry7860.397211/about">Mobile Application Development Services</a> <a href="https://xtremepape.rs/members/samfarrid4563.397213/about">best digital marketing agencies</a>

6 6

Sieve vnd.dovecot.config extension does not work when mail is delivered to lmtp inet_listener but works when delivered to lmtp unix_listener
by DK 20 Jul '26

20 Jul '26

Hello. I have a strange problem with sieve scripts vnd.dovecot.config extension processing on newest dovecot 2.3 and 2.4. When I deliver mail via lmtp unix_listener sieve script can get sieve_env_* variable with no problem. However when I deliver mail via lmtp inet_listener sieve script can not get the same sieve_env_* variable. I deliver mails from postfix to lmtp inet_listener directly (not via haproxy). The same postfix is used when testing lmtp unix_listener mail delivery which works. Any clues what could be the cause of such problem? DK

2 3

[Dovecot] batch convert mbox to maildir
by Netlink Tech 18 May '26

18 May '26

Hello, I have used mb2md for an individual user like this: su ~username cd ~ ./mb2md -m This converted /var/spool/mail/username mbox to /home/users/username/Maildir just as I expected. To convert 100s of users the same way would be a chore (su as each user for permissions, etc.). Is there a way to batch process all /var/spool/mail/$USER to /home/users/$USER/Maildir with the correct permissions/file owners for each user?

4 4

mbox to maildir migration, same server?
by kjohnson＠eclypse.org 25 Apr '26

25 Apr '26

What is the recommended procedure to migrate from mbox to maildir on a server already running dovecot? Ideally, this procedure would convert messages in an existing mbox INBOX and in ~/mail mboxes (as defined in my dovecot configuration) to storage in a ~/Maildir. Some of the INBOXs are rather large -- 100's of MB (one of the reasons for migrating). What I have tried has not worked for me. Below, I describe what I tried, how I tested before I tried, what went wrong, and the current setup (pre-migration). What I tried: ============= stop exim4 service dovecot stop Make dovecot listen only locally, not to external connections. /etc/dovecot/local.conf protocol imap { listen = 127.0.0.1:143 ssl_listen = 127.0.0.1:993 } protocol pop3 { listen = 127.0.0.1:110 ssl_listen = 127.0.0.1:995 } Modify dovecot configuration for maildir: Watch capitalization! #in 10-mail.conf: mail_location = maildir:/home/%u/Maildir namespace inbox { separator = / } dovecot -n, to confirm results and perform limited syntax checking. service dovecot start for each user, in a bash script: dsync -v -u "$U" mirror "mbox:/home/$U/mail:INBOX=/var/mail/$U" (if the conversion worked for all users, then reconfigure exim to use maildir and restart it; reconfigure dovecot to listen to external interfaces and restart.) How I tested: ============= Before trying this on the real server, I set up a matching (same versions of Debian, Exim, and Dovecot) VM using mbox, with a couple of accounts. One using POP3, one using IMAP. The IMAP account was accessed from Claws and from Outlook. The test accounts had perhaps a dozen messages on the server. I tried the conversion procedure, and everything I tried worked flawlessly. (Yes, next time I will move some real inbox files from the live server). What went wrong: ================ I encountered two types of problems here. The first was several dsync warnings (username changed): dsync(example): Warning: Mailbox changes caused a desync. You may want to run dsync again: Remote lost mailbox GUID 21bfa11a81f11763ac150000d09efc50 (maybe it was just deleted?) As I understand it, this can result in some or all messages being downloaded again by clients. My understanding may be wrong. I also don't understand how the mailbox could have changed -- exim4 was stopped, dovecot is only listening on 127.0.0.1, and I am the only user who uses a local mail client on that system, and this was not my account. The second problem I encountered seems to match Debian Bug report logs - #1011238. In part of the discussion of that report, the reporter mentions adding -1 to the command, as shown: dsync -v -u "$U" mirror -1 "mbox:/home/$U/mail:INBOX=/var/mail/$U" While this seemed to eliminate the dsync panic of #1011238, as far as I can tell, no old messages were actually moved from the old mbox files to the new maildirs. At that point I restored the backup mbox files and undid the changes to dovecot and exim4. Current setup: ============== Debian 11.4 Exim 4.94.2-7 dovecot 1:2.3.13+dfsg1-2 The current setup with Dovecot was a successful migration from IMAP-UW in December 2020. Output from dovecot -n (the list of trusted networks has been removed) # 2.3.13 (89f716dc2): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.13 (cdd19fe3) # OS: Linux 5.10.0-16-686-pae i686 Debian 11.4 # Hostname: localhost auth_verbose = yes mail_location = mbox:~/mail:INBOX=/var/mail/%u mail_privileged_group = mail namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } pop3_uidl_format = %08Xv%08Xu protocols = " imap pop3" ssl_cert = </etc/dovecot/dovecot.pem ssl_client_ca_dir = /etc/ssl/certs ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it userdb { driver = passwd } Thank you to anyone who read this far. Ken

5 5

doveadm batch crash
by Jonathan Casiot 13 Apr '26

13 Apr '26

Hi I'm having an issue with doveadm batch - the following command always crashes: doveadm batch : mailbox status all inbox Whereas the following work as expected: doveadm mailbox status all inbox doveadm batch : mailbox list Any assistance gratefully received. Debug output from the crash: Debug: Loading modules from directory: /usr/lib64/dovecot Debug: Module loaded: /usr/lib64/dovecot/lib01_acl_plugin.so Debug: Module loaded: /usr/lib64/dovecot/lib10_mail_crypt_plugin.so Debug: Module loaded: /usr/lib64/dovecot/lib90_stats_plugin.so Debug: Loading modules from directory: /usr/lib64/dovecot/doveadm Debug: Module loaded: /usr/lib64/dovecot/doveadm/lib10_doveadm_acl_plugin.so Debug: Skipping module doveadm_expire_plugin, because dlopen() failed: /usr/lib64/dovecot/doveadm/lib10_doveadm_expire_plugin.so: undefined symbol: expire_set_deinit (this is usually intentional, so just ignore this message) Debug: Skipping module doveadm_quota_plugin, because dlopen() failed: /usr/lib64/dovecot/doveadm/lib10_doveadm_quota_plugin.so: undefined symbol: quota_user_module (this is usually intentional, so just ignore this message) Debug: Skipping module doveadm_fts_lucene_plugin, because dlopen() failed: /usr/lib64/dovecot/doveadm/lib20_doveadm_fts_lucene_plugin.so: undefined symbol: lucene_index_iter_deinit (this is usually intentional, so just ignore this message) Debug: Skipping module doveadm_fts_plugin, because dlopen() failed: /usr/lib64/dovecot/doveadm/lib20_doveadm_fts_plugin.so: undefined symbol: fts_user_get_language_list (this is usually intentional, so just ignore this message) Debug: Module loaded: /usr/lib64/dovecot/doveadm/libdoveadm_mail_crypt_plugin.so doveadm(jc): Debug: Effective uid=1001, gid=100, home=/home/jc doveadm(jc): Debug: acl: No acl_shared_dict setting - shared mailbox listing is disabled doveadm(jc): Debug: mail_crypt_plugin: mail_crypt_curve setting missing - generating EC keys disabled doveadm(jc): Debug: Namespace inbox: type=private, prefix=, sep=., inbox=yes, hidden=no, list=yes, subscriptions=yes location=mdbox:~/mdbox:ALT=~/Archive/tape/mdbox doveadm(jc): Debug: fs: root=/home/jc/mdbox, index=, indexpvt=, control=, inbox=, alt=/home/jc/Archive/tape/mdbox doveadm(jc): Debug: acl: initializing backend with data: vfile doveadm(jc): Debug: acl: acl username = jc doveadm(jc): Debug: acl: owner = 1 doveadm(jc): Debug: acl vfile: Global ACLs disabled doveadm(jc): Panic: file mail-storage.c: line 875 (mailbox_set_reason): assertion failed: (reason != NULL) doveadm(jc): Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0(+0xa0e9e) [0x7fc993023e9e] -> /usr/lib64/dovecot/libdovecot.so.0(default_fatal_handler+0x2a) [0x7fc993023f0a] -> /usr/lib64/dovecot/libdovecot.so.0(i_fatal+0) [0x7fc992fb3c97] -> /usr/lib64/dovecot/libdovecot-storage.so.0(+0x49856) [0x7fc993301856] -> /usr/bin/doveadm(+0x348e2) [0x5631dbb5f8e2] -> /usr/bin/doveadm(+0x2e1ad) [0x5631dbb591ad] -> /usr/bin/doveadm(+0x2bd2c) [0x5631dbb56d2c] -> /usr/bin/doveadm(+0x2c92a) [0x5631dbb5792a] -> /usr/bin/doveadm(doveadm_mail_try_run+0x215) [0x5631dbb58285] -> /usr/bin/doveadm(main+0x46a) [0x5631dbb473fa] -> /lib64/libc.so.6(__libc_start_main+0xf5) [0x7fc992bd83d5] -> /usr/bin/doveadm(+0x1c565) [0x5631dbb47565] Aborted (core dumped) And doveconf -n output: # 2.2.36 (1f10bfa63): /etc/dovecot/dovecot.conf # OS: Linux 3.10.0-957.1.3.el7.x86_64 x86_64 CentOS Linux release 7.6.1810 (Core) # Hostname: ### redacted ### first_valid_gid = 100 first_valid_uid = 1000 last_valid_gid = 100 last_valid_uid = 1999 listen = * login_greeting = IMAP ready login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e session=<%{session}> %k mail_attribute_dict = file:%h/mdbox/dovecot-attributes mail_location = mdbox:~/mdbox:ALT=~/Archive/tape/mdbox mail_plugins = acl stats mail_crypt mailbox_list_index = yes mdbox_rotate_size = 16 M namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = . } passdb { driver = pam } plugin { acl = vfile mail_crypt_global_private_key = <### redacted ### mail_crypt_global_public_key = <### redacted ### mail_crypt_save_version = 2 stats_memory_limit = 16 M stats_refresh = 30 secs stats_track_cmds = yes } postmaster_address = ### redacted ### protocols = imap service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service imap-login { process_limit = 200 process_min_avail = 4 service_count = 1 } service stats { fifo_listener stats-mail { group = users mode = 01224 } } ssl = required ssl_cert = <### redacted ### ssl_key = # hidden, use -P to show it ssl_prefer_server_ciphers = yes ssl_protocols = !SSLv2 !SSLv3 !TLSv1 userdb { driver = passwd } verbose_proctitle = yes protocol imap { imap_idle_notify_interval = 10 mins imap_metadata = yes mail_max_userip_connections = 20 mail_plugins = acl stats mail_crypt imap_acl imap_stats } Regards, -- Jonathan

2 3

[Dovecot] migration from IMAP/POP3 courier server to a remote dovecot server
by nik600 06 Apr '26

06 Apr '26

Dear all i'm planning a transparent migration from a courier server that provides both IMAP and POP3 access to users to a remote dovecot server with both IMAP and POP3 access. I have to migrate about 2500 users for 250 GB of space. I'm using dovecot 2.2.5.4 on debian6 squeeze. To make a transparent migration i have to maintain old IMAP UIDs and POP3 UIDs, so i've read http://wiki2.dovecot.org/Migration and http://wiki2.dovecot.org/Migration/Courier and http://wiki2.dovecot.org/Migration/Dsync And decided that probably the best tool to use is Dsync, as the courier-dovecot-migrate.pl<http://www.dovecot.org/tools/courier-dovecot-migrate.pl> script works only locally. I've tested the dsync following instructions reported above but after the migration of one test-account the client re-download messages. If i want to keep both IMAP UIDs and POP3 UIDs i have to sync both imapc and pop3c with two commands? doveadm -o imapc_user=foo -o pop3c_user=foo -o imapc_password=bar -o pop3c_password=bar backup -R -u user@domain imapc: doveadm -o imapc_user=foo -o pop3c_user=foo -o imapc_password=bar -o pop3c_password=bar backup -R -u user@domain pop3c: Or imapc is enough? Do you have any suggestion? Thanks -- /*************/ nik600 http://www.kumbe.it

2 3

shared mailbox error
by Marc 19 Mar '26

19 Mar '26

I am getting this error. This file does not exist. Error: t_readlink(/xxxxxx/dbox-alt-root) failed: readlink() failed: Permission denied

2 4

Panic with FTS_BACKEND_FLAG_TOKENIZED_INPUT and virtual mailboxes: file index-search-result.c: line 132
by markus-dovecot＠doits.de 31 Oct '25

31 Oct '25

Originally posted and debugged here: https://github.com/slusarz/dovecot-fts-flatcurve/issues/66 I have to following panic with fts flatcurve enabled: ``` Panic: file index-search-result.c: line 132 (index_search_result_update_flags): assertion failed: (result->search_args->args == &search_arg) Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(backtrace_append+0x46) [0x74e9890a2846] -> /usr/lib/dovecot/libdovecot.so.0(backtrace_get+0x22) [0x74e9890a2962] -> /usr/lib/dovecot/libdovecot.so.0(+0x10d81b) [0x74e9890af81b] -> /usr/lib/dovecot/libdovecot.so.0(+0x10d8b7) [0x74e9890af8b7] -> /usr/lib/dovecot/libdovecot.so.0(+0x5e2e2) [0x74e9890002e2] -> /usr/lib/dovecot/libdovecot-storage.so.0(+0x518a4) [0x74e9891d38a4] -> /usr/lib/dovecot/modules/lib20_virtual_plugin.so(virtual_storage_sync_init+0x274e) [0x74e988bf8a9e] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_sync_init+0x5c) [0x74e9891eff9c] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_sync+0x39) [0x74e9891f0039] -> dovecot/imap(cmd_select_full+0x1df) [0x62354bd8326f] -> dovecot/imap(command_exec+0xa4) [0x62354bd8b444] -> dovecot/imap(+0x22392) [0x62354bd89392] -> dovecot/imap(+0x22444) [0x62354bd89444] -> dovecot/imap(client_handle_input+0x1bd) [0x62354bd8989d] -> dovecot/imap(client_input+0x74) [0x62354bd89e64] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x6d) [0x74e9890c603d] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0x13a) [0x74e9890c77aa] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x54) [0x74e9890c60e4] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x40) [0x74e9890c62a0] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x17) [0x74e989036ad7] -> dovecot/imap(main+0x570) [0x62354bd7ad20] -> /lib/x86_64-linux-gnu/libc.so.6(+0x29d90) [0x74e988c29d90] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x80) [0x74e988c29e40] -> dovecot/imap(_start+0x25) [0x62354bd7ade5] ``` It happens when accessing virtual folder with filters like this: ``` something-*/excep-dev* header x-abc-exception "1" ``` The error happens on subsequent access of the folder: - Removing dovecot.index{,.log} files allows to access the virtual folder again - dovecot.index gets recreated on access and the folder can be accessed multiple times - Marking an e-mail read triggers the error, though! Now each next access raises the error - Removing dovecot.index{,.log} restores access again and the e-mails are still marked as read (so this information is not lost), until the next e-mail is marked as read: then the folder cannot be accessed again Slusarz debugged the backtrace and wrote a detailed description at https://github.com/slusarz/dovecot-fts-flatcurve/issues/66#issuecomment-229… which I'll quote here: > This is not a flatcurve bug - it is a bug within Dovecot's indexing/fts handling. > > (Detailed debug below, so that core team can understand the problem.) > > As discussed above, this bug is triggered with virtual mailboxes on subsequent accesses. The initial access will work fine; the assert crash only happens when the Dovecot lib-storage index code reads the indexes created for the virtual mailboxes. > > `index_search_result_update_appends()` in lib-storage/index/index-search-result.c > > * Inside this function, a "temporary search parameter to limit the search only to the new messages" is added to the mail search args. Later, it is checked that the mail_search args points to this same search parameter after the search is executed. It is this assert check that is failing, because the mail args is changing during the course of the search. > > * `i_assert(result->search_args->args == &search_arg);` > > > The search args are being altered in plugins/fts/fts-search.args.c, `fts_search_args_expand()`. Specifically, in that function, either `fts_search_args_expand_language_top_level()` or `fts_search_args_expand_tree()` is being called, which can replace the current args parameter with a new pointer. > > `fts_search_args_expand()` is being called in plugins//fts/fts-search.c by `fts_search_try_lookup()` when the FTS backend has the FTS_BACKEND_FLAG_TOKENIZED_INPUT flag set. Flatcurve has this flag set. > > This flag is defined in plugins/fts/fts-api-private.h. Comments say: > > ``` > /* Tokenize all the input. update_build_more() will be called a single > directly indexable token at a time. Searching will modify the search > args so that lookup() sees only tokens that can be directly > searched. */ > ``` > > Thus, the comments explicitly say the search args will be modified if this flag is set. This modification is incompatible with the assert check in `index_search_result_update_appends()`, which requires that the search args not be modified. > > The core team will have to determine whether this behavior is correct, or if the assert check is invalid. You can find some more discussion at https://github.com/slusarz/dovecot-fts-flatcurve/issues/66, but I think the most important part (the very detailed analysis from Slusarz, thanks again!) might be enough to understand and maybe fix the problem. Relevant information about the mail system: ``` # 2.3.21 (47349e2482): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.21 (f6cd4b8e) # OS: Linux 6.5.0-45-generic x86_64 Ubuntu 22.04.4 LTS [...] namespace { location = virtual:~/virtual:LAYOUT=maildir++ prefix = _/ separator = / } [...] plugin { acl = vfile acl_shared_dict = file:/var/lib/dovecot/db/shared fts = flatcurve fts_autoindex = yes fts_filters = normalizer-icu snowball stopwords fts_filters_en = lowercase snowball stopwords fts_languages = de en fts_tokenizer_email_address = maxlen=100 fts_tokenizer_generic = algorithm=simple maxlen=30 fts_tokenizers = generic email-address sieve = file:~/sieve;active=~/.dovecot.sieve } [...] ``` I can provide more information if you need. Thanks for looking into it!

2 3

Lots of problems with Dovecot 2.4
by sev+dovecot＠sev.monster 06 Oct '25

06 Oct '25

Hello all, I am trying to get Dovecot 2.4 running on Alpine Edge x86-64. But a myriad of problems have occurred that make it impossible to do so. First of all was the recent off-by-one bug that was recently fixed, which caused an unavoidable segfault on start under musl libc, which Alpine uses: https://gitlab.alpinelinux.org/alpine/aports/-/issues/17050 Then, I saw that the shadow driver was removed, which necessitated the installation of PAM and my learning about it... I haven't needed it before, so I'd never used it. I guess I understand why the decision was made to use PAM, though I still don't like it. After resolving those issue, I've run into new ones: 1. The passwd userdb does not seem to work correctly. It is able to get the first user and its information correctly, but any attempts to look up any user after that will seemingly always use the information from the first matched user. Setting max auths to 1 so that the auth process is discarded afterwards does not seem to help. For example, if the first user to log in to Dovecot is bob, and then user joe logs in, the information returned from the passwd userdb will all be that of user bob, not joe. This continues for all subsequent userdb lookups until Dovecot is restarted, and a new userdb lookup is persisted. Changing to passwd-file instead works and does not experience this problem. 2. Why is the only available username field for the passwd driver %{passwd:system_groups_user}? I understand what the purpose of the field is based on the docs, but shouldn't more than this be exposed? The fields available through passwd are also not documented, and I had to read the source to find them out. This should either be documented or a more standard username field be additionally exposed as with other drivers. Can this field even be relied on to use as the username, if the driver otherwise worked? 3. It seems the Exim auth driver is no longer able to successfully authenticate with Dovecot 2.4 against Exim 4.98.2. It works fine in the last version of 2.3.21.1. Has the authentication framework changed along with the other modifications that 2.4 underwent? Has any effort been made with the Exim team to resolve any incompatibilities? Can I somehow diagnose this issue if it's otherwise supposed to work? 4. The ldap driver can no longer look up missing fields from LDAP users. Some (but not all) of my users have the rfc2307bis schema posixAccount supplemental objectClass, and as such contain the posixHome, uidNumber, and gidNumber attributes—but even if I specify a default value, if one of the attributes is not queryable for the returned user, the lookup errors out and the login fails. This is a regression/undocumented change from 2.3.x, where instead of erroring out, the default_fields value would be used. Based on my interpretation of the design goals for 2.4, I would imagine the default filter would ignore the missing attribute error and set the default value like default_fields used to, no? Or am I missing something? 5. passdb_ldap_filter is always required for the ldap passdb driver, even if passdb_ldap_bind is enabled. Not only does this go against the docs, but the value is unused and it doesn't matter what it's set to. This is a regression from 2.3.x. Overall I am very unimpressed by 2.4. It clearly needed a lot more time in the oven and much more thorough testing. Relevant minimal config from my working 2.3.21.1 install: auth_username_format = %Ln auth_mechanisms = plain login passdb { driver = shadow } userdb { driver = passwd override_fields = gid=mail home=/var/mail/%Ln } passdb { driver = ldap args = /etc/dovecot/ldap-passdb.conf.ext #uris = ldapi://%2frun%2fopenldap%2fslapd.sock #base = ou=accounts,dc=ldap #auth_bind = yes #auth_bind_userdn = uid=%Ln,ou=accounts,dc=ldap } userdb { driver = ldap default_fields = uid=mail gid=mail home=/var/mail/%Ln args = /etc/dovecot/ldap-userdb.conf.ext #uris = ldapi://%2frun%2fopenldap%2fslapd.sock #dn = cn=dovecot,dc=ldap #dnpass = "some pw" #base = ou=accounts,dc=ldap #iterate_filter = (objectClass=inetOrgPerson) #iterate_attrs = uid=username #user_filter = (&(objectClass=inetOrgPerson)(uid=%Ln)) #user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid } mail_location = maildir:/var/mail/%Ln mail_plugins = $mail_plugins virtual namespace inbox { inbox = yes mailbox INBOX { auto = subscribe } } namespace virtual { type = private separator = . prefix = "Search Folders." location = virtual:/etc/dovecot/virtual:INDEX=~/dovecot-virtual.cache:CONTROL=~/dovecot-virtual.cache:VOLATILEDIR=~/dovecot-virtual.cache # virtual/All/dovecot-virtual: #!INBOX #* #-Junk #-Junk* #-Spam #-Spam* #-Trash #-Trash* #-Deleted #-Deleted* #-Deleted Items #-Deleted Items* # all hidden = yes list = children subscriptions = no mailbox All { auto = subscribe special_use = \All comment = All messages, excluding Junk and Trash } } namespace virtual-user { type = private separator = . prefix = "User Search Folders." location = virtual:~/.virtual:INDEX=~/dovecot-virtual-user.cache:CONTROL=~/dovecot-virtual-user.cache:VOLATILEDIR=~/dovecot-virtual-user.cache:LAYOUT=maildir++ hidden = yes list = children subscriptions = no } service auth { unix_listener auth-userdb { # restrict userdb to dovecot user/group only instead of world read/write mode = 0660 user = $default_internal_user group = $default_internal_group } unix_listener auth-client { # give Exim access to native authentication mode = 0660 group = exim } } service auth-worker { # no need to run as root user = $default_internal_user # allow pam passdb to read /etc/shadow group = shadow } !include_try /usr/share/dovecot/protocols.d/*.conf protocol imap { mail_max_userip_connections = 25 } protocol pop3 { mail_max_userip_connections = 25 } Converted config for 2.4: dovecot_config_version = 2.4.1 dovecot_storage_version = 2.4.1 mail_home = /var/mail/%{user | username | lower } mail_driver = maildir mail_path = $SET:mail_home mail_plugins = virtual auth_username_format = %{user | username | lower } auth_mechanisms = plain login passdb pam { failure_show_msg = yes max_requests = 1 } userdb passwd-file { passwd_file_path = /etc/passwd fields { gid = mail } } # BUG: doesn't work right #userdb passwd { # fields { # gid = mail # } #} passdb ldap { ldap_uris = ldapi://%2frun%2fopenldap%2fslapd.sock ldap_connection_group = login ldap_base = ou=accounts,dc=ldap ldap_bind = yes ldap_bind_userdn = uid=%{user | username | lower },ou=accounts,dc=ldap # XXX: thought this wasnt needed with bind? ldap_filter = z } userdb ldap { ldap_uris = ldapi://%2frun%2fopenldap%2fslapd.sock ldap_auth_dn = cn=dovecot,dc=ldap ldap_auth_dn_password = "some pw" ldap_base = ou=accounts,dc=ldap ldap_filter = (&(objectClass=inetOrgPerson)(uid=%{user | username | lower })) fields { username = %{ldap:uid} # BUG: causes errors if rfc2307bis posixAccount objectClass is not set home = %{ldap:homeDirectory | default($SET:mail_home)} uid = %{ldap:uidNumber | default(mail)} gid = %{ldap:gidNumber | default(mail)} } ldap_iterate_filter = (objectClass=inetOrgPerson) iterate_fields { username = %{ldap:uid} } } namespace inbox { inbox = yes mailbox INBOX { auto = subscribe } } namespace virtual { type = private separator = . prefix = "Search Folders." mail_driver = virtual mail_path = /etc/dovecot/virtual # virtual/All/dovecot-virtual: #!INBOX #* #-Junk #-Junk* #-Spam #-Spam* #-Trash #-Trash* #-Deleted #-Deleted* #-Deleted Items #-Deleted Items* # all mail_index_path = ~/dovecot-virtual.cache mail_control_path = ~/dovecot-virtual.cache mail_volatile_path = ~/dovecot-virtual.cache hidden = yes list = children subscriptions = no mailbox All { auto = subscribe special_use = \All comment = All messages, excluding Junk and Trash } } namespace virtual-user { type = private separator = . prefix = "User Search Folders." mail_driver = virtual mail_path = ~/dovecot-virtual-user mail_index_path = ~/dovecot-virtual-user.cache mail_control_path = ~/dovecot-virtual-user.cache mail_volatile_path = ~/dovecot-virtual-user.cache mailbox_list_layout = Maildir++ hidden = yes list = children subscriptions = no } service auth { unix_listener auth-userdb { # restrict userdb to dovecot user/group only instead of world read/write mode = 0660 } unix_listener auth-client { # give Exim access to native authentication mode = 0660 group = exim } } service auth-worker { # no need to run as root user = $SET:default_internal_user # allow pam passdb to read /etc/shadow group = shadow } protocols = imap pop3 protocol imap { mail_max_userip_connections = 25 } protocol pop3 { mail_max_userip_connections = 25 } In addition to help with the noted issues, I'd also love if anyone more knowledgeable on Dovecot 2.4 could give any pointers on my config and if I could improve the translation in any way, given I have been fumbling around with it for weeks and am not really sure if my various decisions are correct. Best regards.

9 11