- dovecot - dovecot.org

[Dovecot] default client_limit
by Micah Anderson 23 Sep '13

23 Sep '13

I recently upgraded my dovecot from 2.1 to 2.2, and when I started, I received this message: doveconf: Warning: service auth { client_limit=1000 } is lower than required under max. load (1024) Searching through my configs, I do not have 1024 set anywhere. In order to stop this I set client_limit=1024 in my auth{} block... this seemed odd that the defaults disagreed with each other. However, it made me realize that my system could probably handle more, if it were properly tuned, and the different limit settings at their defaults are probably smaller than they could be for my server and the load it is under. So, I'm wondering how I can accurately set some of these values? The different possible things that can be set are: default_process_limit (for some reason I have this set to 256) default_client_limit (default) default_vsz_limit (I have this set to 512M) for the imap-login service, I have: service_count = 0 process_min_avail = 10 vsz_limit = 512M for service pop3-login, these are set: service_count = 0 process_min_avail = 10 vsz_limit = 512M for service imap, process_limit = 2048 service auth, I've just set the client_limit=1024 I've also got a ulimit -n set to 2048 and in my sysctl.conf, I have the following: fs.inotify.max_user_instances = 2048 because I was seeing this in the logs: Warning: Inotify instance limit for user 8 (UID mail) exceeded, disabling. Increase /proc/sys/fs/inotify/max_user_instances What I am looking for is a few things: . is there a formula for setting a proper value for some of these? . will dovecot warn me when I've reached a limit, so I can adjust these? thanks for any suggestions or improvements, I'm pretty sure this system can handle a lot more than it is doing right now, I just am unclear on how to tune it up to do that. micah

1 0

[Dovecot] Expunged message reappeared, giving a new UID
by Simon Fraser 23 Sep '13

23 Sep '13

I am running dovecot 2.2.2 with tcp based replication, and experiencing some duplicated emails. `doveconf -n` output is below. I have narrowed it down to the following scenario: An email arrives, and is successfully replicated to both nodes. It is in INBOX/new/ at this point on both servers. Connect with a mail client, and delete the message - without delayed expunge. So, for example, mutt (press 'd' then '$' to sync the mailbox), or Evolution set to immediately delete. The following log entry appears on the server the client is connected to: Jul 26 10:40:55 intmail3a dovecot: imap(srf): Warning: /mail/spool/s/srf/mail/INBOX/dovecot-uidlist: Duplicate file entry at line 5: 1374831638.M830754P11591.intmail3a,S=1289,W=1321 (uid 733481 -> 733482) - retrying by re-reading from beginning Jul 26 10:40:55 intmail3a dovecot: imap(srf): Warning: Maildir /mail/spool/s/srf/mail/INBOX: Expunged message reappeared, giving a new UID (old uid=733481, file=1374831638.M830754P11591.intmail3a,S=1289,W=1321) The email reappears in the mailbox, although this time it is in INBOX/new on one node and INBOX/cur on the other. As best I can tell it's always in 'new' on the server the client was connected to and in 'cur' on the other. If any other mailbox operation occurs before the delete (Marking the message in question as 'read', receiving a new message into the mailbox in a different lmtp session, marking as read or deleting & expunging some other message) then this prevents the duplication from happening. What can I do to prevent this happening? Is there a synchronisation interval I can adjust, perhaps? Although the message does get synchronised initially. Thanks in advance, Simon. # 2.2.2: /mail/etc/dovecot/dovecot.conf # OS: Linux 3.5.0-23-generic x86_64 Ubuntu 12.04.2 LTS disable_plaintext_auth = no doveadm_password = secret first_valid_uid = 100 lda_mailbox_autocreate = yes mail_gid = dovecot mail_home = /mail/spool/%1n/%n mail_location = maildir:~/mail:INBOX=~/mail/INBOX mail_plugins = notify replication mail_uid = dovecot managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = . } passdb { args = /mail/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { mail_replica = tcps:intmail3b:12345 sieve_dir = ~/sieve } protocols = imap lmtp sieve service aggregator { fifo_listener replication-notify-fifo { mode = 0600 user = dovecot } unix_listener replication-notify { mode = 0600 user = dovecot } } service config { unix_listener config { user = dovecot } } service doveadm { inet_listener { port = 12345 ssl = yes } user = dovecot } service replicator { process_min_avail = 1 } ssl_cert = </mail/etc/certs/mail-cert.pem ssl_client_ca_dir = /etc/ssl/certs ssl_key = </mail/etc/certs/mail-key.pem userdb { args = /mail/etc/dovecot/dovecot-ldap.userdb.conf.ext driver = ldap } protocol lmtp { mail_plugins = notify replication sieve } protocol lda { mail_plugins = notify replication sieve } protocol imap { mail_max_userip_connections = 30 } -- The Wellcome Trust Sanger Institute is operated by Genome Research Limited, a charity registered in England with number 1021457 and a company registered in England with number 2742969, whose registered office is 215 Euston Road, London, NW1 2BE.

8 30

[Dovecot] Dsync error: Failed to set attribute vendor/vendor.dovecot/pvt/sieve/default
by Aleksey Tsvetkov 23 Sep '13

23 Sep '13

Hi, Introduction: There are two domains, for example (aaa.com, bbb.com) In the aaa.com domain two users (bob(a)aaa.com, alex(a)aaa.com) In the bbb.com domain there are no users. In time full sync replication (replication_full_sync_interval) operations in logs appear errors: dovecot: dsync-local(bob(a)aaa.com): Error: Mailbox INBOX: Failed to set attribute vendor/vendor.dovecot/pvt/sieve/default: Invalid value for default sieve attribute dovecot: dsync-remote(bob(a)aaa.com): Error: Mailbox INBOX: Failed to set attribute vendor/vendor.dovecot/pvt/sieve/default: Invalid value for default sieve attribute One more error: dovecot: auth-worker(46263): sql(bob(a)bbb.com): unknown user dovecot: auth-worker(46263): sql(bob(a)bbb.com): Unknown user dovecot: auth-worker(46263): sql(bob): unknown user dovecot: auth-worker(46263): sql(bob): Unknown user dovecot: auth-worker(46263): sql(alex(a)aaa.com): unknown user dovecot: auth-worker(46263): sql(alex(a)aaa.com): Unknown user dovecot: auth-worker(46263): sql(alex): unknown user dovecot: auth-worker(46263): sql(alex): Unknown user Command: doveadm user '*' bob(a)aaa.com alex(a)aaa.com dovecot --build-options Build options: ioloop=kqueue notify=kqueue ipv6 openssl io_block_size=8192 Mail storages: shared mdbox sdbox maildir mbox cydir imapc pop3c raw fail SQL drivers: mysql Passdb: checkpassword pam passwd passwd-file sql Userdb: checkpassword nss passwd prefetch passwd-file sql dovecot --version 2.2.5 Somebody faced this problem? -- Best regards, Aleksey Tsvetkov System Administrator Company Grand Vision tel. +7(495)933-39-79, ext. 184

4 4

[Dovecot] mdbox index directories: bug?
by Holecz Endre 22 Sep '13

22 Sep '13

Hi, I'm using mdbox now (Dovecot 2.2.4), with indexes on a separate disk. Works fine, but the directories for indexes are also present in the storage folder, and are empty. Userdb (sql) returns this: home /var/vmail/domains/somedomain/someuser mail mdbox:~/mdbox:INDEX=/mnt/spool/dovecot/index/somedomain/s/someuser And the created directory structure is: /var/vmail/domains/somedomain/someuser /mdbox /mailboxes /INBOX /dbox-Mails /storage /mnt/spool/dovecot/index/somedomain/s/someuser /mailboxes /INBOX /storage /var/vmail/domains/somedomain/someuser/mdbox/mailboxes/* is always empty. Am I doing something wrong, or is this by design? :) Regards, Endre

3 3

[Dovecot] doveadm sync only creates directories, don't sync messages?
by Matthew Kaufman 22 Sep '13

22 Sep '13

Running Dovecot 2.1.7. I'm trying to migrate from an environment with mbox files to a maildir configuration. I remove all vestiges of my maildir over in /var/mail I put my old mailboxes in ./Mail and my old inbox in ./matthew. I issue this command: doveadm sync -u matthew(a)matthew.at mbox:./Mail:INBOX=./matthew Initially it gave me errors about separator, so I set the separator in the inbox namespace to "/" explicitly. Now that I've done that, and re-run it, over in the right place /var/mail, it creates "matthew" and a subdirectory "Mail". That's it. Doesn't take long to do it, either. But it doesn't copy any messages at all. I must be doing something wrong... but what? Matthew Kaufman matthew(a)eeph.com

1 0

[Dovecot] pop3c migration?
by Gedalya 22 Sep '13

22 Sep '13

Hi, I'm running dsync migrations using imapc and the source IMAP server is just too slow. It has taken 8 hours to migrate a mailbox with 47,000 messages. It seems most of the mailboxes are never accessed with IMAP, so it would be just as good to migrate them via POP3 which should work faster in my case. Is this actually meant to work? doveadm -D -o pop3c_user=xxxxxx(a)example.com -o 'pop3c_password=*******' -o pop3c_host=120.121.122.123 backup -u yyyyy(a)example.com -R pop3c: gives: doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib20_listescape_plugin.so doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules/doveadm doveadm(root): Debug: Skipping module doveadm_acl_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_acl_plugin.so: undefined symbol: acl_user_module (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_expire_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_expire_plugin.so: undefined symbol: expire_set_init (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_quota_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_quota_plugin.so: undefined symbol: quota_user_module (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_zlib_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_zlib_plugin.so: undefined symbol: i_stream_create_deflate (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_fts_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib20_doveadm_fts_plugin.so: undefined symbol: fts_list_backend (this is usually intentional, so just ignore this message) doveadm(yyyyy(a)example.com): Debug: Added userdb setting: mail=maildir:/stor/real/domains/example.com/yy/yyyyy/Maildir doveadm(yyyyy(a)example.com): Debug: Added userdb setting: plugin/quota_rule=*:storage=5120M doveadm(yyyyy(a)example.com): Debug: Effective uid=1001, gid=1001, home=/stor/real/domains/example.com/yy/yyyyy doveadm(yyyyy(a)example.com): Debug: Namespace : type=private, prefix=POP3-MIGRATION-NS/, sep=, inbox=no, hidden=yes, list=no, subscriptions=yes location=pop3c: doveadm(yyyyy(a)example.com): Debug: fs: root=, index=, control=, inbox=, alt= doveadm(yyyyy(a)example.com): Debug: Namespace inbox: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/stor/real/domains/example.com/yy/yyyyy/Maildir doveadm(yyyyy(a)example.com): Debug: maildir++: root=/stor/real/domains/example.com/yy/yyyyy/Maildir, index=, control=, inbox=/stor/real/domains/example.com/yy/yyyyy/Maildir, alt= dsync(yyyyy(a)example.com): Debug: Effective uid=1001, gid=1001, home=/stor/real/domains/example.com/yy/yyyyy dsync(yyyyy(a)example.com): Debug: Namespace : type=private, prefix=POP3-MIGRATION-NS/, sep=, inbox=no, hidden=yes, list=no, subscriptions=yes location=pop3c: dsync(yyyyy(a)example.com): Debug: fs: root=, index=, control=, inbox=, alt= dsync(yyyyy(a)example.com): Debug: Namespace inbox: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=pop3c: dsync(yyyyy(a)example.com): Debug: fs: root=, index=, control=, inbox=, alt= Segmentation fault remembering something about that... : # mkdir /tmp/pop3c # chown vmail:vmail /tmp/pop3c/ # doveadm -D -o pop3c_user=xxxxxx(a)example.com -o 'pop3c_password=*******' -o pop3c_host=120.121.122.123 backup -u yyyyy(a)example.com -R pop3c:/tmp/pop3c doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib20_listescape_plugin.so doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules/doveadm doveadm(root): Debug: Skipping module doveadm_acl_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_acl_plugin.so: undefined symbol: acl_user_module (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_expire_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_expire_plugin.so: undefined symbol: expire_set_init (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_quota_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_quota_plugin.so: undefined symbol: quota_user_module (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_zlib_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_zlib_plugin.so: undefined symbol: i_stream_create_deflate (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_fts_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib20_doveadm_fts_plugin.so: undefined symbol: fts_list_backend (this is usually intentional, so just ignore this message) doveadm(yyyyy(a)example.com): Debug: Added userdb setting: mail=maildir:/stor/real/domains/example.com/yy/yyyyy/Maildir doveadm(yyyyy(a)example.com): Debug: Added userdb setting: plugin/quota_rule=*:storage=5120M doveadm(yyyyy(a)example.com): Debug: Effective uid=1001, gid=1001, home=/stor/real/domains/example.com/yy/yyyyy doveadm(yyyyy(a)example.com): Debug: Namespace : type=private, prefix=POP3-MIGRATION-NS/, sep=, inbox=no, hidden=yes, list=no, subscriptions=yes location=pop3c: doveadm(yyyyy(a)example.com): Debug: fs: root=, index=, control=, inbox=, alt= doveadm(yyyyy(a)example.com): Debug: Namespace inbox: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/stor/real/domains/example.com/yy/yyyyy/Maildir doveadm(yyyyy(a)example.com): Debug: maildir++: root=/stor/real/domains/example.com/yy/yyyyy/Maildir, index=, control=, inbox=/stor/real/domains/example.com/yy/yyyyy/Maildir, alt= dsync(yyyyy(a)example.com): Debug: Effective uid=1001, gid=1001, home=/stor/real/domains/example.com/yy/yyyyy dsync(yyyyy(a)example.com): Debug: Namespace : type=private, prefix=POP3-MIGRATION-NS/, sep=, inbox=no, hidden=yes, list=no, subscriptions=yes location=pop3c: dsync(yyyyy(a)example.com): Debug: fs: root=, index=, control=, inbox=, alt= dsync(yyyyy(a)example.com): Debug: Namespace inbox: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=pop3c:/tmp/pop3c dsync(yyyyy(a)example.com): Debug: fs: root=/tmp/pop3c/., index=/tmp/pop3c, control=, inbox=, alt= dsync(yyyyy(a)example.com): Debug: Namespace : Using permissions from /tmp/pop3c/.: mode=0755 gid=-1 dsync(yyyyy(a)example.com): Debug: Namespace : Using permissions from /stor/real/domains/example.com/yy/yyyyy/Maildir: mode=0700 gid=-1 dsync(yyyyy(a)example.com): Debug: Namespace : /tmp/pop3c/./INBOX doesn't exist yet, using default permissions dsync(yyyyy(a)example.com): Debug: Namespace : Using permissions from /tmp/pop3c/.: mode=0755 gid=-1 dsync(yyyyy(a)example.com): Debug: pop3c(120.121.122.123): Looking up IP address dsync(yyyyy(a)example.com): Debug: pop3c(120.121.122.123): Connecting to 120.121.122.123:110 dsync(yyyyy(a)example.com): Debug: pop3c(120.121.122.123): Authenticating as xxxxxx(a)example.com dsync(yyyyy(a)example.com): Panic: file mail-storage.c: line 1311 (mailbox_get_metadata): assertion failed: ((items & MAILBOX_METADATA_GUID) == 0 || !guid_128_is_empty(metadata_r->guid)) dsync(yyyyy(a)example.com): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x45caa) [0xb761ccaa] -> /usr/lib/dovecot/libdovecot.so.0(default_fatal_handler+0x47) [0xb761cdc7] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0xb761d647] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_get_metadata+0x120) [0xb76f3040] -> doveadm() [0x80740bc] -> doveadm(dsync_worker_mailbox_iter_next+0x21) [0x8071c11] -> doveadm() [0x806c1f7] -> doveadm(dsync_brain_sync+0x6c0) [0x806b890] -> doveadm(dsync_brain_sync_all+0x18) [0x806c4f8] -> doveadm() [0x806961b] -> doveadm() [0x8069bbf] -> doveadm() [0x80541ec] -> doveadm(doveadm_mail_try_run+0x257) [0x8054ee7] -> doveadm(main+0x391) [0x805d0c1] -> /lib/i386-linux-gnu/i686/cmov/libc.so.6(__libc_start_main+0xe6) [0xb748ae46] -> doveadm() [0x8054001] Aborted Now I'm lost... Am I in the right direction? Thanks, Gedalya # dovecot -n # 2.1.17: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-686-pae i686 Debian 7.1 auth_default_realm = example.com auth_mechanisms = plain login cram-md5 auth_verbose = yes auth_verbose_passwords = plain default_client_limit = 8096 dict { expire = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext } disable_plaintext_auth = no imapc_host = mail01.example.com mail_gid = vmail mail_plugins = listescape mail_prefetch_count = 50 mail_uid = vmail namespace { hidden = yes list = no location = pop3c: prefix = POP3-MIGRATION-NS/ } namespace inbox { inbox = yes location = prefix = separator = / type = private } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { expire = Trash expire2 = Trash.* expire3 = Junk expire_dict = proxy::expire pop3_migration_mailbox = POP3-MIGRATION-NS/INBOX sieve = ~/.dovecot.sieve sieve_before = /var/local/lib/dovecot/sieve/global/fileinto-spam.sieve sieve_dir = ~/sieve } pop3c_host = 120.121.122.123 postmaster_address = postmaster(a)example.com service auth-worker { user = $default_internal_user } service auth { client_limit = 20480 } service dict { unix_listener dict { mode = 0600 user = vmail } } service imap-login { process_min_avail = 4 service_count = 0 vsz_limit = 128 M } service imap { process_limit = 10240 } service lmtp { inet_listener lmtp { address = 0.0.0.0 port = 7025 } } service pop3-login { process_min_avail = 4 service_count = 0 vsz_limit = 128 M } service pop3 { process_limit = 4096 } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } verbose_proctitle = yes protocol doveadm { mail_plugins = listescape pop3_migration } protocol lmtp { mail_plugins = listescape sieve } protocol imap { mail_max_userip_connections = 25 mail_plugins = listescape imap_quota ssl_cert = </etc/dovecot/imap.example.com.crt ssl_key = </etc/dovecot/imap.example.com.key } protocol pop3 { mail_max_userip_connections = 10 mail_plugins = listescape pop3_fast_size_lookups = yes pop3_no_flag_updates = yes pop3_reuse_xuidl = no pop3_save_uidl = yes pop3_uidl_format = %08Xu%08Xv ssl_cert = </etc/dovecot/pop.example.com.crt ssl_key = </etc/dovecot/pop.example.com.key } /etc/dovecot/dovecot-sql.conf.ext : driver = mysql connect = ..... default_pass_scheme = PLAIN password_query = SELECT password, \ '/stor/real/domains/%d/%2n/%n' AS userdb_home, \ 'maildir:/stor/real/domains/%d/%2n/%n/Maildir' as userdb_mail, \ concat('*:storage=', quota_mb, 'M') as userdb_quota_rule, \ 'vmail' AS userdb_uid, 'vmail' AS userdb_gid \ FROM email WHERE userid = '%n' AND domain = '%d' and deleted=0 user_query = SELECT '/stor/real/domains/%d/%2n/%n' AS home, \ 'maildir:/stor/real/domains/%d/%2n/%n/Maildir' as mail, \ concat('*:storage=', quota_mb, 'M') as quota_rule, \ 'vmail' AS uid, 'vmail' AS gid \ FROM email WHERE userid = '%n' AND domain = '%d' and deleted=0 iterate_query = SELECT userid as user, domain FROM email where deleted=0

2 2

[Dovecot] Attachment file larger than expected
by Angel L. Mateo 22 Sep '13

22 Sep '13

Hello, I'm using dovecot 2.1.16 with SiS configured as: mail_attachment_dir = <mypath> mail_attachment_min_size = 128 k mail_attachment_fs = sis posix mail_attachment_hash = %{sha1} I'm having a few errors like: Sep 18 15:46:32 myotis51 dovecot: imap(igd): Error: Attachment file /mail/users/attachments/16/b0/16b0b2023a903db14d7f7bcdb1cc04c3f67a4fcb-b32c0a2aa6ae39527c870000a9061514 larger than expected (235866) They are really few and users haven't reported any problem, but the errors are there. In this case, actual file size of the attachment is: amateo_adm@myotis51:~$ sudo stat /mail/users/attachments/16/b0/16b0b2023a903db14d7f7bcdb1cc04c3f67a4fcb-b32c0a2aa6ae39527c870000a9061514 Fichero: «/mail/users/attachments/16/b0/16b0b2023a903db14d7f7bcdb1cc04c3f67a4fcb-b32c0a2aa6ae39527c870000a9061514» Tamaño: 174476 Bloques: 344 Bloque E/S: 4096 fichero regular Dispositivo: fc00h/64512d Nodo-i: 152334473 Enlaces: 2 Acceso: (0600/-rw-------) Uid: ( 2012/ vmail) Gid: ( 204/ vmail) Acceso: 2013-09-18 15:46:20.540728654 +0200 Modificación: 2013-09-18 15:46:20.556728948 +0200 Cambio: 2013-09-18 15:46:20.556728949 +0200 Creación: - and file is identified as: amateo_adm@myotis51:~$ sudo file /mail/users/attachments/16/b0/16b0b2023a903db14d7f7bcdb1cc04c3f67a4fcb-b32c0a2aa6ae39527c870000a9061514 /mail/users/attachments/16/b0/16b0b2023a903db14d7f7bcdb1cc04c3f67a4fcb-b32c0a2aa6ae39527c870000a9061514: MIME entity, UTF-8 Unicode text, with very long lines, with CRLF line terminators Any idea? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868889150 Fax: 868888337

2 1

[Dovecot] problem with dovecot replication over tcp
by nik600 22 Sep '13

22 Sep '13

Dear all i'm following the wiki at this page http://wiki2.dovecot.org/Replication but i'm getting this errors: #doveadm -v sync tcp:dst_hostname #doveadm(root): Fatal: Failed to start dsync-server command: 75 If i look at the dst dovecot.log file i get: Sep 16 12:42:18 auth: Error: passdb(root,xx): Auth client doesn't have permissions to do a PASS lookup: /var/run/dovecot/auth-userdb mode=0666, but not owned by UID 1002(vmail) Sep 16 12:42:18 doveadm(xx,root): Error: user root: Auth PASS lookup failed Sep 16 12:42:18 doveadm(xx,root): Debug: auth input: Sep 16 12:42:18 doveadm(xx,root): Error: dsync-server: /var/run/dovecot/auth-userdb: passdb lookup failed (to see if user is proxied, because doveadm_proxy_port is set) I've also tried to perform a #chown vmail /var/run/dovecot/auth-userdb But the error is the same. If i do the #doveadm user * I get a list of users loaded from the database i've added these line to my dovecot-sql.conf iterate_query = SELECT username from mailbox where active=1 Any idea? Thanks -- /*************/ nik600 http://www.kumbe.it

2 1

[Dovecot] DH Parameter
by Dimi - 22 Sep '13

22 Sep '13

Hi! Is there any possibility to let dovecot serve >1024 Bit DH Parameters at SSL/TLS-connections? Is it possible to replace /var/lib/dovecot/ssl-parameters.ssl with DH-parameter generated by openssl? If not: Are there any plans to implement that? Thank you!

2 1

[Dovecot] Error: BUG: Worker sent reply with id 393, expected 394
by 刘莹莹 22 Sep '13

22 Sep '13

hi dovecot: when i login 100 users with imap protocol ,Someusers appeared a BUG in maillog like : Sep 10 09:05:22 auth(default): Error: BUG: Worker sent reply with id 393, expected 394 Sep 10 09:05:22 auth(default): Error: worker-server(q82(a)t.com,10.12.80.3): Aborted: Worker is buggy Sep 10 09:05:22 auth(default): Error: BUG: Worker sent reply with id 31, expected 32 Sep 10 09:05:22 auth(default): Error: worker-server(q95(a)t.com,10.12.80.3): Aborted: Worker is buggy Sep 10 09:05:22 auth(default): Error: BUG: Worker sent reply with id 32, expected 33 Sep 10 09:05:22 auth(default): Error: worker-server(q99(a)t.com,10.12.80.3): Aborted: Worker is buggy Sep 10 09:05:22 auth(default): Error: BUG: Worker sent reply with id 29, expected 30 Sep 10 09:05:22 auth(default): Error: worker-server(q22(a)t.com,10.12.80.3): Aborted: Worker is buggy Sep 10 09:05:22 imap-login: Info: Internal login failure (auth failed, 1 attempts): user=<q3(a)t.com>, method=PLAIN, rip=10.12.80.3, lip=10.12.80.6

2 1