- dovecot - dovecot.org

[Dovecot] auth probes without IP - "Initial status notification not received ..."
by LEVAI Daniel 25 Jun '13

25 Jun '13

Hi! I've been getting a bunch of these messages lately in my logs: dovecot: master: Error: service(auth): Initial status notification not received in 30 seconds, killing the process dovecot: auth: Fatal: master: service(auth): child 11016 killed with signal 9 dovecot: master: Error: service(auth): Initial status notification not received in 30 seconds, killing the process dovecot: auth: Fatal: master: service(auth): child 27660 killed with signal 9 # fgrep -c -e "master: Error: service(auth): Initial status" dovecot.log* [...] dovecot.log.1:501 dovecot.log.2:250 [...] But I can not link these auth probes to any IP addresses within the dovecot log files. This is dovecot-2.2.2 on OpenBSD-stable. What do you guys suggest? Thanks, Daniel -- LÉVAI Dániel PGP key ID = 0x83B63A8F Key fingerprint = DBEC C66B A47A DFA2 792D 650C C69B BE4C 83B6 3A8F

2 2

[Dovecot] Warning recipient when message delivery fails due to over-quota
by Ben Johnson 24 Jun '13

24 Jun '13

I'm working to configure automated quota notifications in Dovecot and am wondering if it is possible to send a warning message to a user when message delivery fails because the user is over-quota. I already have the following directives configured: quota_warning = storage=95%% quota-warning 95 %u %d quota_warning2 = storage=80%% quota-warning 80 %u %d quota_warning3 = -storage=100%% quota-below below %u %d These seem to function as expected, but the problem I'm facing is that when a message is large enough to take the user's quota from, say, 84% to over 100%, the message is rejected (as expected), but the user is never warned that a message failed to be delivered because it would have put him over 100% usage. I suppose that I'm looking for a trigger that is tripped when delivering the message *would* put the user over-quota (as opposed to *does in fact* put the user over). The sender receives an automated rejection message already. I'm wondering if the recipient can be warned at the same time. (I'm not concerned about further increasing the user's quota consumption with the warning message; I would set noenforcing to 1.) Is this possible? Any help is much appreciated. Thanks in advance. -Ben

3 4

[Dovecot] mail_max_userip_connections on a per user basis
by Antonio Leding 24 Jun '13

24 Jun '13

Hello, Can the above setting be applied on a per user account basis? I thought that maybe something like per account quotas might be a possible method but not sure. Thanks.

2 1

[Dovecot] doveadm move command
by vincent truc 24 Jun '13

24 Jun '13

Hello I want to transfer an email from user1(a)domain.com to put it in a folder of another user: user2(a)domain.com For that, it seems to me appropriate to use 'doveadm move' command, but I can not get the right result. Can you help me? syntax: doveadm move [-u <user>|-A] [-S <socket_path>] <destination> [user <source user>] <search query> my attempts: doveadm move -u user2(a)domain.com DIRECTORY_2 mailbox user1(a)domain.com:'DIRECTORY_1' all return: Error: Syncing mailbox user1@domaine.fr:DOSSIER_1 failed: Mailbox doesn't exist: user1@domaine.fr:DOSSIER_1 doveadm -u user2(a)domain.com DIRECTORY_2 mailbox sdbox:/complete/path/user1@domain.com/mailboxes/DIRECTORY_1 all return: Error: Syncing mailbox sdbox:/complete/path/user1@domain.com/mailboxes/DIRECTORY_1 failed: Mailbox doesn't exist: sdbox:/complete/path/user1@domain.com/mailboxes/DIRECTORY_1 doveadm move -u user2(a)domain.com DIRECTORY_2 mailbox user1(a)domain.com 'DIRECTORY_2' all return: Fatal: Unknown argument DIRECTORY_2

2 1

[Dovecot] Dsync only one mailbox
by Piotr Janusz 24 Jun '13

24 Jun '13

Hi, I am looking for a way to sync only selected files/mailbox'es using dsync. Am I using the dsync -m option incorectly? It looks like it's being ignored. And as for the main INBOX (/var/mail/username) what should be the parameter for -m? dovecot --version 2.1.7 dsync -u pj -D -v -m Alerts -o mail_location=mdbox:/home/pj/mdbox backup mbox:/home/pj/:INBOX=/var/mail/pj doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib10_quota_plugin.so doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules/doveadm doveadm(root): Debug: Skipping module doveadm_acl_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_acl_plugin.so: undefined symbol: acl_user_module (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_expire_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_expire_plugin.so: undefined symbol: expire_set_lookup (this is usually intentional, so just ignore this message) doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_quota_plugin.so doveadm(root): Debug: Skipping module doveadm_zlib_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_zlib_plugin.so: undefined symbol: i_stream_create_deflate (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_fts_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib20_doveadm_fts_plugin.so: undefined symbol: fts_list_backend (this is usually intentional, so just ignore this message) doveadm(pj): Debug: Effective uid=3195, gid=3195, home=/home/pj doveadm(pj): Debug: Quota root: name=INBOX backend=fs args=mount=/var/:user doveadm(pj): Debug: Quota root: name=Katalog_domowy backend=fs args=mount=/home/:user doveadm(pj): Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=mdbox:/home/pj/mdbox doveadm(pj): Debug: fs: root=/home/pj/mdbox, index=, control=, inbox=, alt= doveadm(pj): Debug: fs quota add mailbox dir = /var/ doveadm(pj): Debug: fs quota block device = /dev/cciss/c0d0p4 doveadm(pj): Debug: fs quota mount point = /var doveadm(pj): Debug: fs quota mount type = ext4 doveadm(pj): Debug: fs quota add mailbox dir = /home/ doveadm(pj): Debug: fs quota block device = /dev/cciss/c0d1p1 doveadm(pj): Debug: fs quota mount point = /home doveadm(pj): Debug: fs quota mount type = ext4 doveadm(pj): Debug: Namespace : Using permissions from /home/pj/mdbox: mode=0700 gid=-1 dsync(pj): Debug: Effective uid=3195, gid=3195, home=/home/pj dsync(pj): Debug: Quota root: name=INBOX backend=fs args=mount=/var/:user dsync(pj): Debug: Quota root: name=Katalog_domowy backend=fs args=mount=/home/:user dsync(pj): Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=mbox:/home/pj/:INBOX=/var/mail/pj dsync(pj): Debug: fs: root=/home/pj, index=, control=, inbox=/var/mail/pj, alt= dsync(pj): Debug: fs quota add mailbox dir = /var/ dsync(pj): Debug: fs quota block device = /dev/cciss/c0d0p4 dsync(pj): Debug: fs quota mount point = /var dsync(pj): Debug: fs quota mount type = ext4 dsync(pj): Debug: fs quota add mailbox dir = /home/ dsync(pj): Debug: fs quota block device = /dev/cciss/c0d1p1 dsync(pj): Debug: fs quota mount point = /home dsync(pj): Debug: fs quota mount type = ext4 dsync(pj): Debug: Namespace : Using permissions from /home/pj: mode=0700 gid=-1 dsync(pj): Error: Failed to sync mailbox www/IMG_20121119_184255.jpg: Mailbox isn't a valid mbox file dsync(pj): Error: Failed to sync mailbox www/rtranalizer.exe: Mailbox isn't a valid mbox file dsync(pj): Error: Failed to sync mailbox www/raport_nsm.rar: Mailbox isn't a valid mbox file .... -- Piotr Janusz

2 1

[Dovecot] dovecot-lda - dovecot: quota-warning: Error: lda: Fatal: Unknown argument
by Ben Johnson 24 Jun '13

24 Jun '13

Hi, everyone, I'm attempting to configure automated quota warnings for users and have hit a snag. The script I'm using is as follows: --------------------------------------------------------------------- #!/bin/sh PERCENT=$1 MAILBOX=$2 DOMAIN=$3 cat << EOF | /usr/lib/dovecot/dovecot-lda -d $USER -o "plugin/quota=dict:user::file:/var/vmail/%d/%n/.quotausage" From: postmaster@$DOMAIN Subject: Email quota warning - mailbox over $PERCENT% full [...] --------------------------------------------------------------------- When the script is triggered, here's what appears in the log: --------------------------------------------------------------------- Jun 24 11:16:53 host dovecot: quota-warning: Error: lda: Fatal: Unknown argument: plugin/quota=dict:user::noenforcing:file:/var/vmail/%d/%n/.quotausage Jun 24 11:16:53 host dovecot: master: Error: service(quota-warning): child 22415 returned error 64 --------------------------------------------------------------------- If I paste the same on the command line, the message is delivered, as expected: /usr/lib/dovecot/dovecot-lda -d user(a)example.com -o "plugin/quota=dict:user::noenforcing:file:/var/vmail/%d/%n/.quotausage" -p /tmp/test.txt The problem seems to be that the -o switch isn't being interpreted correctly when dovecot-lda is called from within the script. -o is the correct switch, yes? From the manual at http://wiki2.dovecot.org/LDA : -o name=value: Override a setting from dovecot.conf. You can give this parameter multiple times. What am I missing here? Is some shell script escaping or similar required? Thanks for any tips! -Ben

1 1

[Dovecot] NTLM Authentication for Postfix SMTP clients
by Matthew Larsen 24 Jun '13

24 Jun '13

I'm trying to get NTLM authentication working with Dovecot to authenticate Postfix SMTP clients. I can authenticate postfix smtp clients using the plain text login mechanism through winbind. However, using the NTLM mechanism gives me an error in my maillog that says: "dovecot: auth: winbind(?,10.20.2.0): user not authenticated: NT_STATUS_UNSUCCESSFUL". At this point, I'm rather stuck. It appears PAM and winbind work for authenticating with AD because it works with the plain text mechanism, but I'm missing something with the NTLM authentication method. Any suggestions as to what I've got wrong, or other logging I can turn up / examine that might shed some light on this? When I use the LOGIN mechanism I see this in the mail logging and the message is relayed: Jun 21 13:12:58 SBSMTPNV05 postfix/smtpd[1501]: connect from nvit01b.mydomain.com[10.20.2.0] Jun 21 13:12:58 SBSMTPNV05 dovecot: auth: Debug: auth client connected (pid=1501) Jun 21 13:12:58 SBSMTPNV05 dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=smtp#011nologin#011lip=10.20.4.12#011rip=10.20.2.0#011resp=AG[...snip...]g== Jun 21 13:12:58 SBSMTPNV05 dovecot: auth: Debug: pam(myusername,10.20.2.0): lookup service=dovecot Jun 21 13:12:58 SBSMTPNV05 dovecot: auth: Debug: pam(myusername,10.20.2.0): #1/1 style=1 msg=Password: Jun 21 13:12:58 SBSMTPNV05 dovecot: auth: Debug: client out: OK#0111#011user=myusername Jun 21 13:12:58 SBSMTPNV05 postfix/smtpd[1501]: 54EAF8059B: client=nvit01b.mydomain.com[10.20.2.0], sasl_method=PLAIN, sasl_username=myusername Jun 21 13:12:58 SBSMTPNV05 postfix/cleanup[1504]: 54EAF8059B: message-id=<51C4B3C8.30008(a)domain1.com> Jun 21 13:12:58 SBSMTPNV05 postfix/qmgr[1499]: 54EAF8059B: from=<someone(a)domain1.com>, size=2700, nrcpt=1 (queue active) Jun 21 13:12:58 SBSMTPNV05 postfix/smtpd[1501]: disconnect from nvit01b.mydomain.com[10.20.2.0] Jun 21 13:12:59 SBSMTPNV05 postfix/smtp[1505]: 54EAF8059B: to=<someone(a)gmail.com>, relay=gmail-smtp-in.l.google.com[74.125.25.27]:25, delay=1.2, delays=0.23/0.04/0.16/0.72, dsn=2.0.0, status=sent (250 2.0.0 OK 1371845579 wf5si3786287pab.138 - gsmtp) Jun 21 13:12:59 SBSMTPNV05 postfix/qmgr[1499]: 54EAF8059B: removed I also see this in the secure log: Jun 21 13:12:58 SBSMTPNV05 auth: pam_unix(dovecot:auth): authentication failure; logname= uid=0 euid=0 tty=dovecot ruser=myusername rhost=10.20.2.0 user=myusername Jun 21 13:12:58 SBSMTPNV05 auth: pam_winbind(dovecot:auth): getting password (0x00000010) Jun 21 13:12:58 SBSMTPNV05 auth: pam_winbind(dovecot:auth): pam_get_item returned a password Jun 21 13:12:58 SBSMTPNV05 auth: pam_winbind(dovecot:auth): user 'myusername' granted access Jun 21 13:12:58 SBSMTPNV05 auth: pam_winbind(dovecot:account): user 'myusername' granted access However, when I switch the mechanism to NTLM in the Thurnderbird MUA I see this: Jun 21 13:15:46 SBSMTPNV05 postfix/smtpd[1506]: connect from nvit01b.mydomain.com[10.20.2.0] Jun 21 13:15:46 SBSMTPNV05 dovecot: auth: Debug: Loading modules from directory: /usr/lib64/dovecot/auth Jun 21 13:15:46 SBSMTPNV05 dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libauthdb_ldap.so Jun 21 13:15:46 SBSMTPNV05 dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_sqlite.so Jun 21 13:15:46 SBSMTPNV05 dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libmech_gssapi.so Jun 21 13:15:46 SBSMTPNV05 dovecot: auth: Debug: auth client connected (pid=1506) Jun 21 13:15:46 SBSMTPNV05 dovecot: auth: Debug: client in: AUTH#0111#011NTLM#011service=smtp#011nologin#011lip=10.20.4.12#011rip=10.20.2.0#011resp=TlRMT[...snip...]A= Jun 21 13:15:46 SBSMTPNV05 dovecot: auth: Debug: client out: CONT#0111#011TlRMT[[...snip...]A Jun 21 13:15:46 SBSMTPNV05 dovecot: auth: Debug: client in: CONT#0111#011TlRMT[...snip...]A= Jun 21 13:15:46 SBSMTPNV05 dovecot: auth: winbind(?,10.20.2.0): user not authenticated: NT_STATUS_UNSUCCESSFUL Jun 21 13:15:48 SBSMTPNV05 postfix/smtpd[1506]: warning: nvit01b.mydomain.com[10.20.2.0]: SASL NTLM authentication failed: TlRMT[...snip...]A Jun 21 13:15:48 SBSMTPNV05 dovecot: auth: Debug: client out: FAIL#0111 Jun 21 13:15:49 SBSMTPNV05 postfix/smtpd[1506]: disconnect from nvit01b.mydomain.com[10.20.2.0] with nothing in the secure log and I don't see anything show up in the winbind logs either. I've reviewed these pages as reference, and I'm not sure what I'm missing: http://wiki2.dovecot.org/HowTo/ActiveDirectoryNtlm http://wiki2.dovecot.org/Authentication/Mechanisms/NTLM http://www.dovecot.org/list/dovecot/2008-December/035630.html http://www.dovecot.org/list/dovecot/2010-February/046763.html http://blog.al-shami.net/2008/05/freebsd-postfix-dovecot-and-active-directo… http://wiki2.dovecot.org/HowTo/PostfixAndDovecotSASL Here's some of my relevant configuration as I understand it: I've joined the computer to the AD domain. The wbinfo tests work fine: # wbinfo -t checking the trust secret for domain MYDOMAIN via RPC calls succeeded # doveconf -n # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-358.11.1.el6.x86_64 x86_64 CentOS release 6.4 (Final) auth_debug_passwords = yes auth_mechanisms = plain ntlm login auth_use_winbind = yes auth_username_format = %Lu listen = * mbox_write_locks = fcntl passdb { driver = pam } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } //////////////////// # postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 7 html_directory = no inet_interfaces = all inet_protocols = ipv4 line_length_limit = 6144 mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost myhostname = srvsbsmtp05.mydomain.com newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtpd_recipient_restrictions = permit_sasl_authenticated,reject_unauth_destination smtpd_sasl_auth_enable = yes smtpd_sasl_path = private/auth smtpd_sasl_type = dovecot unknown_local_recipient_reject_code = 550 ///////////////////// # cat /etc/krb5.conf [logging] default = FILE:/var/log/krb5libs.log kdc = FILE:/var/log/krb5kdc.log admin_server = FILE:/var/log/kadmind.log [libdefaults] default_realm = MYDOMAIN.COM dns_lookup_realm = true dns_lookup_kdc = true ticket_lifetime = 24h renew_lifetime = 7d forwardable = true [domain_realm] .mydomain.com = MYDOMAIN.COM mydomain.com = MYDOMAIN.COM //////////////////// system keytab: # klist -ke Keytab name: FILE:/etc/krb5.keytab KVNO Principal ---- -------------------------------------------------------------------------- 3 host/sbsmtpnv05.mydomain.com(a)MYDOMAIN.COM (des-cbc-crc) 3 host/sbsmtpnv05.mydomain.com(a)MYDOMAIN.COM (des-cbc-md5) 3 host/sbsmtpnv05.mydomain.com(a)MYDOMAIN.COM (arcfour-hmac) 3 host/sbsmtpnv05.mydomain.com(a)MYDOMAIN.COM (aes128-cts-hmac-sha1-96) 3 host/sbsmtpnv05.mydomain.com(a)MYDOMAIN.COM (aes256-cts-hmac-sha1-96) 3 host/sbsmtpnv05(a)MYDOMAIN.COM (des-cbc-crc) 3 host/sbsmtpnv05(a)MYDOMAIN.COM (des-cbc-md5) 3 host/sbsmtpnv05(a)MYDOMAIN.COM (arcfour-hmac) 3 host/sbsmtpnv05(a)MYDOMAIN.COM (aes128-cts-hmac-sha1-96) 3 host/sbsmtpnv05(a)MYDOMAIN.COM (aes256-cts-hmac-sha1-96) 3 SBSMTPNV05$(a)MYDOMAIN.COM (des-cbc-crc) 3 SBSMTPNV05$(a)MYDOMAIN.COM (des-cbc-md5) 3 SBSMTPNV05$(a)MYDOMAIN.COM (arcfour-hmac) 3 SBSMTPNV05$(a)MYDOMAIN.COM (aes128-cts-hmac-sha1-96) 3 SBSMTPNV05$(a)MYDOMAIN.COM (aes256-cts-hmac-sha1-96) 5 smtp/sbsmtpnv05.mydomain.com(a)MYDOMAIN.COM (des-cbc-crc) 5 smtp/sbsmtpnv05.mydomain.com(a)MYDOMAIN.COM (des-cbc-md5) 5 smtp/sbsmtpnv05.mydomain.com(a)MYDOMAIN.COM (arcfour-hmac) 5 smtp/sbsmtpnv05.mydomain.com(a)MYDOMAIN.COM (aes128-cts-hmac-sha1-96) 5 smtp/sbsmtpnv05.mydomain.com(a)MYDOMAIN.COM (aes256-cts-hmac-sha1-96) //////////////////// Samba config: [global] workgroup = MYDOMAIN realm = MYDOMAIN.COM server string = Samba Server Version %v security = ADS kerberos method = system keytab log file = /var/log/samba/log.%m max log size = 50 printcap name = /dev/null domain master = No template shell = /bin/bash winbind separator = + winbind use default domain = Yes idmap config * : range = 10000-50000 idmap config * : backend = tdb printing = bsd cups options = raw print command = lpr -r -P'%p' %s lpq command = lpq -P'%p' lprm command = lprm -P'%p' %j

1 0

[Dovecot] Calling dovecot-lda from within Antispam pipe script (bash) seems to have no effect
by Ben Johnson 24 Jun '13

24 Jun '13

Hello, I'm attempting to configure the Dovecot Antispam plug-in on Ubuntu 12.04 LTS with Dovecot 2.0.19. Everything seems to be in order with one considerable exception: when my pipe script (a simple Bash shell script) calls the dovecot-lda executable, absolutely nothing seems to result. If I copy/paste the exact same command into the terminal, the mail is delivered to the target mailbox, as expected. Here's my pipe script: http://pastebin.com/DBXAZqsN When I move a message from INBOX -> Junk, or from Junk -> INBOX, the pipe script is called, and here's the output: --------------------------------------------------------------- 31465-start (--debug --username=amavis --ham) Checking if the command-line input argument string (--debug --username=amavis --ham) contains the string "ham" or "spam" Mode is "HAM" Calling (as user vmail) '/usr/lib/dovecot/deliver -d "sa-training(a)example.com" -m "Training.HAM" -p "/tmp/sendmail-msg-31465.txt"' 31465-end --------------------------------------------------------------- But, for some reason, the call to "/usr/lib/dovecot/deliver" doesn't seem to do anything. If I copy the above output and paste it into the terminal: /usr/lib/dovecot/deliver -d "sa-training(a)example.com" -m "Training.HAM" -p "/tmp/sendmail-msg-31465.txt" Dovecot does indeed deliver the message. This works whether I execute the above command as "root" or "vmail". Why does this command have no effect when called from within the pipe script? Here is my "doveconf -n" output: # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-042stab076.8 x86_64 Ubuntu 12.04.2 LTS auth_mechanisms = plain login disable_plaintext_auth = no listen = *,[::] log_timestamp = "%Y-%m-%d %H:%M:%S " mail_privileged_group = vmail passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } plugin { antispam_backend = pipe antispam_debug_target = syslog antispam_pipe_program = /usr/bin/sa-learn-pipe.sh antispam_pipe_program_args = --debug;--username=amavis antispam_pipe_program_notspam_arg = --ham antispam_pipe_program_spam_arg = --spam antispam_pipe_tmpdir = /tmp antispam_spam_pattern_ignorecase = SPAM;JUNK antispam_trash_pattern_ignorecase = trash;Deleted * antispam_verbose_debug = 1 quota = dict:user::file:/var/vmail/%d/%n/.quotausage quota_rule2 = Trash:storage=+100M quota_rule3 = Junk:ignore quota_warning = storage=95%% quota-warning 95 %u %d quota_warning2 = storage=80%% quota-warning 80 %u %d quota_warning3 = -storage=100%% quota-below below %u %d sieve = /var/vmail/%d/%n/.sieve } protocols = imap pop3 service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } user = root } service quota-below { executable = script /usr/local/bin/quota-below.sh user = vmail } service quota-warning { executable = script /usr/local/bin/quota-warning.sh user = vmail } ssl_cert = </etc/postfix/smtpd.cert ssl_key = </etc/postfix/smtpd.key userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } protocol imap { mail_plugins = quota imap_quota antispam } protocol pop3 { mail_plugins = quota pop3_uidl_format = %08Xu%08Xv } protocol lda { info_log_path = /var/log/dovecot-lda.log log_path = /var/log/dovecot-lda-errors.log mail_plugins = sieve quota } Thank you, -Ben

5 12

[Dovecot] Config for master user in dovecot 1.1.20
by izul 24 Jun '13

24 Jun '13

Hi folks.. Im planning to migrate my mail server using imapsync.I need master user in my dovecot 1.1.20.Im so blind about this.Anybody can help me? Below is my 'dovecot -n' : ############### [root@mail etc]# dovecot -n # 1.1.20: /etc/dovecot.conf # OS: Linux 2.6.18-194.8.1.el5 i686 CentOS release 5.5 (Final) log_path: /var/log/dovecot.log protocols: pop3 pop3s imap imaps listen: * ssl_cert_file: /etc/pki/tls/certs/iRedMail_CA.pem ssl_key_file: /etc/pki/tls/private/iRedMail.key login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_uid: 507 mail_gid: 507 mail_location: maildir:/%Lh/Maildir/:INDEX=/%Lh/Maildir/ mail_debug: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota zlib mail_plugins(imap): quota imap_quota zlib mail_plugins(pop3): quota zlib mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh lda: postmaster_address: root auth_socket_path: /var/run/dovecot/auth-master mail_plugins: cmusieve quota sieve_global_path: /var/vmail/sieve/dovecot.sieve log_path: /var/log/sieve.log auth default: mechanisms: plain login user: vmail master_user_separator: * verbose: yes debug: yes debug_passwords: yes passdb: driver: sql args: /etc/dovecot-mysql.conf passdb: driver: passwd-file args: /etc/dovecot-master-user-password pass: yes master: yes userdb: driver: sql args: /etc/dovecot-mysql.conf socket: type: listen client: path: /var/spool/postfix/dovecot-auth mode: 438 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 438 user: vmail group: vmail plugin: quota_warning: storage=85%% /usr/bin/dovecot-quota-warning.sh 85 quota_warning2: storage=90%% /usr/bin/dovecot-quota-warning.sh 90 quota_warning3: storage=95%% /usr/bin/dovecot-quota-warning.sh 95 quota: maildir quota_rule: *:storage=100M expire: Trash 7 Trash/* 7 Junk 30 expire_dict: proxy::expire auth_socket_path: /var/run/dovecot/auth-master dict: expire: db:/var/lib/dovecot/expire/expire.db [root@mail etc]# ############### And below is my dovecot.conf : (part of it) ############### auth_master_user_separator = * auth default { auth_master_user_separator= * mechanisms = plain login user = vmail passdb sql { args = /etc/dovecot-mysql.conf } userdb sql { args = /etc/dovecot-mysql.conf } socket listen { master { path = /var/run/dovecot/auth-master mode = 0666 user = vmail group = vmail } client { path = /var/spool/postfix/dovecot-auth mode = 0666 user = postfix group = postfix } } # Add below lines passdb passwd-file { args = /etc/dovecot-master-user-password master = yes pass = yes } } ############### -- View this message in context: http://dovecot.2317879.n4.nabble.com/Config-for-master-user-in-dovecot-1-1-… Sent from the Dovecot mailing list archive at Nabble.com.

9 13

[Dovecot] Dovecot + SELinux permission problems
by Johnny 24 Jun '13

24 Jun '13

Hi, I have set-up dovecot on a F17 box and am encountering weirdnesses with SELinux (who isn't??). Again, I am trying to refrain from disabling SWLinux all together, however tempting, but am stuck in troubleshooting and hope for some ideas... With SELinux set to permissive, I can connect to dovecot and log in to access my mail as expected. With SELinux enforcing, I can connect to dovecot, but cannot login to access mail. The log states ,---- log_path = /var/log/dovecot (set in 10-logging.conf) | Jun 23 15:43:58 imap-login: Info: Login: user=<johndoe>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=15189, secured, session=<xJl+U9PfvgB/AAAB> | Jun 23 15:43:58 imap(johndoe): Error: chdir(/home/user/data1/Maildir//) failed: Permission denied (euid=1000(user) egid=1000(user) missing +w perm: /home/user/data1/Maildir// stat(/home/user/data1/Maildir//) failed: Permission denied) | Jun 23 15:43:58 imap(johndoe): Error: chdir(/home/user/data1/Maildir/) failed: Permission denied | Jun 23 15:43:58 imap(johndoe): Error: user johndoe: Initialization failed: Namespace '': stat(/home/user/data1/Maildir//johndoe) failed: Permission denied (euid=1000(user) egid=1000(user) missing +w perm: /home/user/data1/Maildir//johndoe stat(/home/user/data1/Maildir//johndoe) failed: Permission denied) | Jun 23 15:43:58 imap(johndoe): Error: Invalid user settings. Refer to server log for more information. `---- Only thing I can grasp is *write permission* error. ls -l on the Maildirs shows this should not be the case for uid 1000. ,---- ls -l | drwxrwxr-x. 11 user user 4096 Jul 8 2012 Maildir | \> drwx------. 19 user user 4096 Feb 5 09:04 johndoe `---- I have no idea what the server log is referring to, in the debug log I get ,---- debug_log_path = /var/log/dovecot_debug (set in 10-logging.conf) | Jun 23 15:43:58 imap: Debug: Added userdb setting: mail=maildir:~/johndoe | Jun 23 15:43:58 imap(johndoe): Debug: Effective uid=1000, gid=1000, home=/home/user/data1/Maildir/ | Jun 23 15:43:58 imap(johndoe): Debug: Namespace inbox: type=private, prefix=, sep=., inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/johndoe | Jun 23 15:43:58 imap(johndoe): Debug: maildir++: root=/home/user/data1/Maildir//johndoe, index=, control=, inbox=/home/user/data1/Maildir//johndoe, alt= `---- I had thought SELinux would log something, but /var/log/audit/audit.log is blank... Where to go from here?? Any ideas appreciated... -- Johnny

2 2