- dovecot - dovecot.org

[Dovecot] Dovecot saves mails in "wrong" folder.
by Khoroshyy Petro 06 Mar '12

06 Mar '12

Hi all I have installed dovecot 1.2.15 and try to use it together with offlineimap and gnus. my problem is that it saves emails into /var/mail/petro instead of ~/Maildir Thanks. Petro. This is my .dovecot.conf default_mail_env = maildir:%h/Maildir And this is my .offlineimaprc [general] accounts = Gmail maxsyncaccounts = 1 [Account Gmail] localrepository = Local remoterepository = Remote [Repository Local] type = IMAP remotehost = localhost port = 143 remoteuser = petro [Repository Remote] type = IMAP remotehost = imap.gmail.com remoteuser = myname(a)gmail.com ssl = yes maxconnections = 1 realdelete = no folderfilter = lambda foldername: foldername in ['INBOX'] --

1 0

[Dovecot] LDAP auth_bind fails
by Pol Bettinger 06 Mar '12

06 Mar '12

Hello, I wanted to configure dovecot for using auth_bind but didn't succeed to me it seems like it does always an anonymous bind. Dovecot version 2.1.1 (I started with 2.1.0 and hoped 2.1.1 would fix it) I tried to play around with the base, pass_attrs,pass_filter to no avail but didn't succeed. Looking at a wireshark trace i only saw 7 packets and it seemed to me dovecot did only an anonymous bind. any help would appreciated Sincerely Pol Bettinger output of mail.log: Mar 6 12:16:34 Dell dovecot: auth: Debug: client in: AUTH#0112#011CRAM-MD5#011service=imap#011secured#011lip=192.168.16.27#011rip=192.168.16.20#011lport=993#011rport=51838 Mar 6 12:16:34 Dell dovecot: auth: Debug: client out: CONT#0112#011PDQ1NjgyMjE3NjYyMDk3NjkuMTMzMTAzMjU5NEBEZWxsPg== Mar 6 12:16:34 Dell dovecot: auth: Debug: client in: CONT<hidden> Mar 6 12:16:34 Dell dovecot: auth: Debug: password(arvi(a)arvoreen.net,192.168.16.20): passdb doesn't support credential lookups Mar 6 12:16:36 Dell dovecot: auth: Debug: client out: FAIL#0112#011user=arvi(a)arvoreen.net output of dovecot -n: # 2.1.1: /etc/dovecot/dovecot.conf # OS: Linux 3.0.0-15-generic i686 Ubuntu 11.10 ext4 auth_debug = yes auth_default_realm = arvoreen.net auth_mechanisms = plain digest-md5 cram-md5 auth_verbose = yes base_dir = /var/run/dovecot/ mail_location = maildir:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Archive { auto = create special_use = \Archive } mailbox Drafts { auto = create special_use = \Drafts } mailbox Junk { auto = create special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { auto = create special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-ldap_pass.conf.ext driver = ldap } plugin { sieve = /var/sieve/%d/%1n/%n sieve_dir = /var/sieve/%d/%1n/%n } protocols = imap lmtp sieve service managesieve-login { inet_listener sieve { port = 4190 } } ssl_cert = </etc/ssl/certs/webmail.arvoreen.pem ssl_key = </etc/ssl/private/webmail.arvoreen.key userdb { args = /etc/dovecot/dovecot-ldap_user.conf.ext driver = ldap } protocol lmtp { mail_plugins = " sieve" } output of cat /etc/dovecot/dovecot-ldap_pass.conf.ext: hosts = 127.0.0.1:389 auth_bind = yes auth_bind_userdn = uid=%n,ou=Users,dc=arvoreen,dc=net base = ou=Users,dc=arvoreen, dc=net ldap_version = 3 olcAccess infomation: olcSuffix: dc=arvoreen,dc=net olcAccess: {0}to attrs=userPassword,shadowLastChange by self write by anonymou s auth by dn="cn=admin,dc=arvoreen,dc=net" write by * none olcAccess: {1}to dn.base="" by * read olcAccess: {2}to * by self write by dn="cn=admin,dc=arvoreen,dc=net" write by * read

2 1

[Dovecot] dovecot 2.1.1 + pigeonhole + avelsieve
by Frank Elsner 06 Mar '12

06 Mar '12

Hello all, I've squirrelmail-webmail-1.4.22, dovecot 2.1.1, dovecot-2.1-pigeonhole-0.3.0 installed and working. But I've problems to get the avelsieve plugin for squirrelmail working with dovecot. The "Message Filters" show up in "Options" of squirrelmail, but "Could not log on to timsieved daemon on your IMAP server ........." dovecot log shows: Mar 6 00:00:47 seymour dovecot: managesieve-login: Disconnected: Too many invalid commands. (no auth attempts in 0 secs): 192.168.28.53, secured Where to look for configuration error(s)? | root@seymour: /usr/local/dovecot/src<156> dovecot -n | # 2.1.1: /usr/local/dovecot/etc/dovecot/dovecot.conf | # OS: Linux 2.6.35.14-106.fc14.i686.PAE i686 Fedora release 14 (Laughlin) ext3 | default_vsz_limit = 512 M | disable_plaintext_auth = no | first_valid_uid = 200 | last_valid_uid = 65534 | listen = * | lmtp_save_to_detail_mailbox = yes | login_greeting = c64.shuttle.de - IMAPs Service (dovecot) ready. | login_log_format_elements = %u %r %c | mail_location = maildir:/var/spool/mail/%u | mail_log_prefix = "%Us(%u,%r): " | mail_plugin_dir = /usr/dovecot/lib/dovecot/ | mail_plugins = " notify quota" | managesieve_notify_capability = mailto | managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave | passdb { | args = dovecot | driver = pam | } | plugin { | mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename flag_change append | mail_log_fields = uid box from subject msgid size flags | mail_log_group_events = yes | quota = maildir:User quota | quota_rule = *:storage=2G | quota_rule2 = Trash:storage=+100M | sieve = ~/.sieve | sieve_dir = ~/sieve | } | postmaster_address = postmaster(a)moltke28.b.shuttle.de | protocols = imap sieve | service anvil { | client_limit = 1027 | } | service auth { | unix_listener auth-client { | group = exim | mode = 0660 | user = exim | } | } | service imap-login { | inet_listener imap { | port = 143 | } | inet_listener imaps { | port = 993 | ssl = yes | } | process_limit = 512 | process_min_avail = 10 | } | service imap-postlogin { | executable = script-login /usr/dovecot/bin/imap-post-login | } | service imap { | executable = imap imap-postlogin | } | service lmtp { | inet_listener lmtp { | address = 0.0.0.0 | port = 24 | } | } | service managesieve-login { | inet_listener sieve { | port = 4190 | } | } | service pop3-login { | inet_listener pop3 { | port = 110 | } | inet_listener pop3s { | port = 995 | ssl = yes | } | } | service pop3 { | process_limit = 1024 | } | ssl_cert = </usr/local/etc/c64.shuttle.de.CRT | ssl_cipher_list = ALL:!LOW:!SSLv2 | ssl_key = </usr/local/etc/c64.shuttle.de-dovecot.KEY | ssl_parameters_regenerate = 6 hours | userdb { | driver = passwd | } | verbose_proctitle = yes | protocol lmtp { | mail_plugins = " notify quota quota" | } | protocol lda { | mail_plugins = " notify quota quota" | } | protocol imap { | imap_client_workarounds = delay-newmail tb-extra-mailbox-sep tb-lsub-flags | imap_logout_format = [%i/%o] | mail_max_userip_connections = 0 | mail_plugins = " notify quota mail_log quota imap_quota listescape" | } And the avelsieve config.php has: | /* **** NEW OPTION (as of 0.9.4) **** | * Space separated list of preferred SASL mechanisms for the authentication to | * timsieved */ | | $preferred_mech = "PLAIN"; Ok, looking forward for any tip, Frank Elsner

2 1

[Dovecot] Concurrent dovecot instances on same spool?
by Jacek Osiecki 06 Mar '12

06 Mar '12

Hi all, While reading the "Multiple locations, 2 servers - planning questions..." thread, it just hit me that I was planning to do something that seems to be a bit hazardous... I am setting up an high-availability server set, which consists of two (or more) servers with common disk space, all set behind redundant hardware load balancers. At first, there will be two servers and disk space will be kept on NFS server or on both servers using DRBD+OCFS2 filesystem (what creates kind of networked RAID1 storage space). This will be done mostly to keep WWW service available in case when one of servers fails. However, if we have everything redundant, why not have the same with SMTP and POP3/IMAP? But - won't anything fail if two (or more) dovecots are accessing the same disk space, both for IMAP/POP3 and LDA/LMTP? If it is possible, that would be a good solution for the mentioned thread. If not - where are possible dangers, and are there any plans to make it possible in the future? Greetings, -- Jacek Osiecki joshua(a)ceti.pl GG:3828944 I don't want something I need. I want something I want.

3 4

[Dovecot] testing fts-solr?
by Jean-Daniel Beaubien 05 Mar '12

05 Mar '12

hi everyone, However, how can I verify that solr is working properly? Background: - I'm trying to setup 2.1 with fts_solr and eventually test maildir/mdbox. - I used the following webpage as reference to setup solr: http://www.roessner-network-solutions.com/2012/02/19/full-text-search-with-… I'm looking at /var/log/tomcat6/catalina.out file, but see nothing telling me that it's being used (same for /var/log/mail.log, etc.) Any tips? Thanks

10 34

[Dovecot] \NoSelect on missing folders in LIST
by Peter Mogensen 05 Mar '12

05 Mar '12

Hi, I noticed a difference between courier and dovecot, and I'm not sure which of them is wrong wrt. RFC3501 - if any. I have a Maildir which has been accessed by an Apple Mail client, so it got folders like: INBOX INBOX.Trash INBOX.INBOX.folder INBOX.INBOX.folder.a INBOX.INBOX.folder.b The INBOX.INBOX folder does not exist on disk and is not subscribed. Courier responds to: . list "" "*" with * LIST (\Noselect \HasChildren) "." "INBOX.INBOX" But dovecot does not list that folder using "*". However, if you issue: . list "" "INBOX.%" Dovecot answers: * LIST (\Noselect \HasChildren) "." "INBOX.INBOX" This makes some clients using "*" to get the folder list ignore the folderes below "INBOX.INBOX". I know the recommended client way is to use "%", but I'm still curious about which is the correct behaviour. /Peter

2 3

[Dovecot] GSSAPI auth failing for kmail
by Mark Davies 05 Mar '12

05 Mar '12

Hi, have dovecot 2.0.13 running fine on a NetBSD box, with lots of clients happily authenticating to it with GSSAPI. I've just updated an ArchLinux box to latest new version which has meant its switched from using heimdal to using mit krb5 and its kmail is now also slightly newer. Thunderbird successfully authenticates to dovecot from this machine but kmail now fails. Kmail reports: Unable to authenticate via GSSAPI. The server ... replied: SASL(-1): generic failure: GSSAPI Error: Invalid token was supplied (Token header is malformed or corrupt) The dovecot log reports: Feb 27 13:42:18 bats dovecot: auth: GSSAPI(mark(a)ECS.VUW.AC.NZ,130.195.5.88): Invalid base64 data in continued response Any suggestions on how to track down what specifically has changed and how to fix it? cheers mark

2 11

Re: [Dovecot] testing fts-solr?
by Charles Marcus 05 Mar '12

05 Mar '12

On 2012-03-05 3:43 AM, kadafax(a)gmail.com <kadafax(a)gmail.com> wrote: > Le 02/03/12 13:40, Charles Marcus a écrit : >> On 2012-02-28 11:28 AM, Charles Marcus <CMarcus(a)Media-Brokers.com> wrote: >>> On 2012-02-28 11:05 AM, kfx <kadafax(a)gmail.com> wrote: >>>> Ok I feel ashame... it was a third party init scrip who was the >>>> problem :( >>> So... you're saying that Thunderbird now correctly uses server side >>> search? >> Please respond... I need to know whether or not I need to pursue this, >> since we use Thunderbird in house and will be switching soon to >> dovecot... > Yes, for me thunderbird correctly use server side search. Just got confirmation from the OP that his problem with Thunderbird indeed is now gone, so it was a 3rd party init script causing his problems... One less thing to worry about... -- Best regards, Charles

1 0

[Dovecot] 1.0beta to latest and greatest?
by Charles C 05 Mar '12

05 Mar '12

dear dovecot users, This is my first post and with a rather embarassing question. To soften the question up I just want to say I've been very pleased with Dovecot thus far and its low maintenance requirements - perhaps to pleased! I am running an ancient version of Dovecot, version 1.0.beta9. Do I risk corrupting indices etc by upgrading in one go to 2.1.2? Thanks for your input. Charles

2 1

[Dovecot] BlackBerry will not setup my POP3 email, all other mail clients fine
by Ian Solecki 05 Mar '12

05 Mar '12

Hello, hoping someone here might be able to help me or at least point me in the right direction. My company recently (last week) moved to a new dedicated server for website and email hosting. It is a fairly run-of-the-mill Linux machine running cPanel and Dovecot (with the BlackBerry Fastmail service enabled) as a mail server. When we first set up the server, I was able to create a mailbox, access it via any desktop mail client, webmail, AND by setting it up as a basic POP3 account on my BlackBerry. Mail was running fine to and from the BlackBerry, no problems. I deleted that account from my BlackBerry as it was a test account, and went to add my actual account but was unable to do so. Received the "Cannot log in. Verify your email address, user name and password. If the error persists, contact (my domain name)" message. I tried the test account that had been running successfully and sending/receiving emails not minutes earlier, and it would not set up either. I have since tried multiple accounts on multiple BlackBerry devices (different models) on multiple carriers on several of my different domains (all of which point to the same server, of course), to no avail. Yet, any of these accounts still work flawlessly in any desktop mail client (Outlook, OE, Thunderbird, iPad, iPhone, etc). Also, any of these BlackBerrys work flawlessly with any other mail server. The username to log in to these mailboxes is not standard, it's mailboxname+ example.com if the email address is mailboxname(a)example.com and the mail server is mail.example.com. So, I know I have to access the "Advanced Settings" in BlackBerry email setup in order to put this username in. Still, no effect. So, there is something wrong with how mail SETUP works (not sending/receiving, though that may also not work, I have no way of knowing now) between RIM and my server, and it's something that has changed since the server was set up a week ago. My carrier(s) are clueless, my dedicated server provider (Lunarpages) is clueless. Can anyone help?

3 2