- dovecot - dovecot.org

[Dovecot] Desperately need help ! a default dovecot.conf and/or Ubuntu 11.10 postfix/dovecot server configuration issue!
by D Chen 03 Mar '12

03 Mar '12

When ungraded from Ubuntu 11.04 to 11.10, dovecot can't start successfully with lots of errors i.e. "dovecot: doveconf: Warning: ... 'imaps' protocol is no longer necessary, remove it"... At any rate, I want to setup a postfix(MTA)/dovecot(MDA) servers on Ubuntu 11.10, by following the Postfix installation and configuration instruction in Ubuntu Serverguide, in "1.4 Configuring SASL" section on page 190, after run "sudo apt-get install dovecot-common", it requires to edit the section of "auth default" and the "socket listen" option...,in the /etc/dovecot/dovecot.conf file, BUT my /etc/dovecot/dovecot.conf (only about 4k byes) CAN'T find the "auth default" "socket listen" ! I also checked into the /usr/share/doc/dovecot-common/dovecot/example-config, there is a dovecot.conf, it's also about 4k size, and there is no such "auth default" or "socket listen" words can be found ! where is the default dovecot.conf file I can get a copy ? BTW, there is the dovecot.conf.ucf file (what is this for?) which's about 50k and has the "auth default" and "socket listen" words there ! what is supposed the size for the /etc/dovecot/dovecot.conf ? i'm confused! Thx.

3 2

[Dovecot] fts size
by Jan-Frode Myklebust 02 Mar '12

02 Mar '12

Does anybody have any numbers for how large storage one will need for the fts indexing server? I see the wiki says 30% of mailbox size for Squat (partial=4 full=4). Is it similar for lucene/solr? Do I understand correctly if I think http://wiki2.dovecot.org/Plugins/FTS/Lucene will create an index for each user in his home directory? Will this be accounted for in the users' quota? -jf

3 5

[Dovecot] Thanks, was Re: need simpler instructions for user authentication
by David Benfell 02 Mar '12

02 Mar '12

Thanks to everyone who responded to my request. And I apologize that this message isn't properly threaded. I'm in trouble whenever I have to send mail from my gmail account because I automatically pull it down into the same place from which I send my regular mail (from benfell(a)parts-unknown.org ) and I haven't configured that to deal with the gmail account. That makes it difficult to reply properly to mail on this list which I have subscribed to with the gmail account so that I'd actually receive it even when I'm having problems with my main mail system. Timo Sirainen <tss(a)iki.fi> responded that I needed a userdb and offered that I should probably add the following to dovecot.conf : userdb { driver = passwd } As near as I can tell--and it's been over a day now--that solved the problem. Thanks!

1 0

[Dovecot] 2.1.1: subscriptions: Removing invalid entry
by Ralf Hildebrandt 01 Mar '12

01 Mar '12

Admittedly, it's not a valid folder name and dovecot is right in removing it: Feb 28 17:50:05 postamt dovecot: imap(kbaessle): Warning: Subscriptions file /home/k/b/kbaessle/Maildir/subscriptions: Removing invalid entry: Entw�rfe ...but when looking at the subscription file AFTER the removal, that file contained an empty line. I don't think that's correct. -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

3 2

[Dovecot] need simpler directions on user authentication
by David Benfell 01 Mar '12

01 Mar '12

Hi all, My situation is this: I have postfix running on a Linode under Arch Linux. A recent upgrade to dovecot broke the configuration. Now I get "Couldn't drop privileges: User is missing UID (see mail_uid setting)." I do not want virtual users. I do not particularly want SQL or LDAP. I do have multiple domains. I do use Maildir. I already have SSL certificates for the server which I did manage to get dovecot to quit complaining about. The documentation is driving me nuts. It keeps telling me about stuff I think I don't need. And I can't tell what I actually *do* need. All I want is for system users, including myself, to be able to get their mail. How do I do this? Thank you! David Benfell dbenfell(a)gmail.com

2 1

[Dovecot] need simpler instructions for user authentication
by David Benfell 01 Mar '12

01 Mar '12

Hi all, My situation is this: I have postfix running on a Linode under Arch Linux. A recent upgrade to dovecot broke the configuration. Now I get "Couldn't drop privileges: User is missing UID (see mail_uid setting)." I do not want virtual users. I do not particularly want SQL or LDAP. I do have multiple domains. I do use Maildir. I already have SSL certificates for the server which I did manage to get dovecot to quit complaining about. The documentation is driving me nuts. It keeps telling me about stuff I think I don't need. And I can't tell what I actually *do* need. All I want is for system users, including myself, to be able to get their mail. How do I do this? Thank you! David Benfell dbenfell(a)gmail.com

2 2

[Dovecot] Permission problems
by David Renstrom 01 Mar '12

01 Mar '12

Hi, I've set up a Postfix and Dovecot (only IMAP) combination using MySQL and Postfixadmin on Fedora. Almost everything works correctly now. The only thing bugging me right now is that I always have to change the access privileges of the directories in /var/run/dovecot/ manually to 777 to make it work. As you understand, I'm not particularly happy about this as it doesn't feel secure at all. And I also have to do this every time I reboot since Dovecot resets the old access priviliges (600). As you see I've got a vmail user who belongs to the mail group. Almost all directories under /var/run/dovecot belong to user root and group root. They all have the permissions rw--------. Below is some output from the log file dovecot.log: Mar 01 03:31:17 auth: Fatal: net_connect_unix(auth-worker) in directory /run/dovecot failed: Permission denied (euid=101(vmail) egid=12(mail) missing +r perm: /run/dovecot/auth-worker, dir owned by 0:97 mode=0755) Mar 01 03:31:17 master: Error: service(auth): command startup failed, throttling Mar 01 03:31:46 imap-login: Info: Disconnected (auth failed, 1 attempts): method=PLAIN, rip=94.254.99.6, lip=91.123.204.174 What is wrong here and how can I correct it? Thanks in advance! /David R.

3 2

[Dovecot] remove messages once downloaded
by Michael Sidoric 29 Feb '12

29 Feb '12

> > I need some help with the dovecot configuration. I want to remove > downloaded messages from Mail Server once the messages have been > successfully downloaded by pop3-clients, even when the clients have been > configured to save copy of messages in the Server. timo is quite correct -- consider imap instead, that's why the protocol exists.

5 5

[Dovecot] dovecot-2.1-pigeonhole-0.3.0 identifier redeclared: sieve_multiscript_run (patch)
by Piotr Tarnowski 29 Feb '12

29 Feb '12

Hi, I recently compiled dovecot-2.1.1 on Solaris 10 with Sun Studio, but when I want to compile Sieve for this version (dovecot-2.1-pigeonhole-0.3.0) I get an error: "sieve.c", line 578: identifier redeclared: sieve_multiscript_run and I see that declaration in sieve.h is different from definition in sieve.c, so compilation process fails with SunStudio cc compiler. I have done a quick hack to correct this, and then compiled successfully. Patch is included as attachment. Full output, OS and compiler versions below: libtool: compile: cc -DHAVE_CONFIG_H -I. -I../.. -I/home/soft/dovecot/dovecot-2.1.1 -I/home/soft/dovecot/dovecot-2.1.1/src/lib -I/home/soft/dovecot/dovecot-2.1.1/src/lib-dict -I/home/soft/dovecot/dovecot-2.1.1/src/lib-dns -I/home/soft/dovecot/dovecot-2.1.1/src/lib-mail -I/home/soft/dovecot/dovecot-2.1.1/src/lib-imap -I/home/soft/dovecot/dovecot-2.1.1/src/lib-fs -I/home/soft/dovecot/dovecot-2.1.1/src/lib-charset -I/home/soft/dovecot/dovecot-2.1.1/src/lib-index -I/home/soft/dovecot/dovecot-2.1.1/src/lib-storage -I/home/soft/dovecot/dovecot-2.1.1/src/lib-storage/index -I/home/soft/dovecot/dovecot-2.1.1/src/lib-storage/index/raw -I/home/soft/dovecot/dovecot-2.1.1/src/lib-lda -I/home/soft/dovecot/dovecot-2.1.1/src/lda -I/home/soft/dovecot/dovecot-2.1.1/src/lib-master -I/home/soft/dovecot/dovecot-2.1.1/src/lib-settings -DMODULEDIR=\"/usr/local/dovecot-2.1.1/lib/dovecot\" -I/usr/local/openldap/include -I/usr/local/ssl/include -I/usr/local/include -xO3 -xautopar -c sieve.c -KPIC -DPIC -o .libs/sieve.o "sieve-common.h", line 33: warning: useless declaration "/home/soft/dovecot/dovecot-2.1.1/src/lib-storage/mailbox-list.h", line 13: warning: useless declaration "sieve.c", line 578: identifier redeclared: sieve_multiscript_run current : function(pointer to struct sieve_multiscript {pointer to struct sieve_instance {..} svinst, pointer to struct sieve_result {..} result, pointer to const struct sieve_message_data {..} msgdata, pointer to const struct sieve_script_env {..} scriptenv, int status, _Bool active, _Bool keep, pointer to struct ostream {..} teststream}, pointer to struct sieve_binary {}, pointer to struct sieve_error_handler {pointer to struct pool {..} pool, int refcount, pointer to struct sieve_instance {..} svinst, pointer to struct sieve_error_handler {..} parent, unsigned int max_errors, unsigned int errors, unsigned int warnings, _Bool log_info, _Bool log_debug, pointer to function(..) returning void verror, pointer to function(..) returning void vwarning, pointer to function(..) returning void vinfo, pointer to function(..) returning void vdebug, pointer to function(..) returning void free}, unsigned int, _Bool) returning _Bool previous: function(pointer to struct sieve_multiscript {pointer to struct sieve_instance {..} svinst, pointer to struct sieve_result {..} result, pointer to const struct sieve_message_data {..} msgdata, pointer to const struct sieve_script_env {..} scriptenv, int status, _Bool active, _Bool keep, pointer to struct ostream {..} teststream}, pointer to struct sieve_binary {}, pointer to struct sieve_error_handler {pointer to struct pool {..} pool, int refcount, pointer to struct sieve_instance {..} svinst, pointer to struct sieve_error_handler {..} parent, unsigned int max_errors, unsigned int errors, unsigned int warnings, _Bool log_info, _Bool log_debug, pointer to function(..) returning void verror, pointer to function(..) returning void vwarning, pointer to function(..) returning void vinfo, pointer to function(..) returning void vdebug, pointer to function(..) returning void free}, enum sieve_runtime_flags {SIEVE_RUNTIME_FLAG_NOGLOBAL(1)}, _Bool) returning _Bool : "sieve.h", line 168 cc: acomp failed for sieve.c *** Error code 1 dmake: Fatal error: Command failed for target `sieve.lo' Current working directory /home/soft/dovecot/dovecot-2.1-pigeonhole-0.3.0/src/lib-sieve *** Error code 1 The following command caused the error: fail= failcom='exit 1'; \ for f in x $MAKEFLAGS; do \ case $f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo all-recursive | sed s/-recursive//`; \ list='plugins'; for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (cd $subdir && dmake $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ dmake "$target-am" || exit 1; \ fi; test -z "$fail" dmake: Fatal error: Command failed for target `all-recursive' % uname -a SunOS soft 5.10 Generic_142909-17 sun4u sparc SUNW,Sun-Fire-V890 Solaris % version Machine hardware: sun4u OS version: 5.10 Processor type: sparc Hardware: SUNW,Sun-Fire-V890 The following components are installed on your system: Sun Studio 12 update 1 Sun Studio 12 update 1 C Compiler Sun Studio 12 update 1 C++ Compiler Sun Studio 12 update 1 Tools.h++ 7.1 Sun Studio 12 update 1 C++ Standard 64-bit Class Library Sun Studio 12 update 1 Garbage Collector Sun Studio 12 update 1 Fortran 95 Sun Studio 12 update 1 Debugging Tools (including dbx) Sun Studio 12 update 1 IDE Sun Studio 12 update 1 Performance Analyzer (including collect, ...) Sun Studio 12 update 1 Performance Library Sun Studio 12 update 1 Scalapack Sun Studio 12 update 1 LockLint Sun Studio 12 update 1 Building Software (including dmake) Sun Studio 12 update 1 Documentation Set Sun Studio 12 update 1 /usr symbolic links and GNOME menu item version of "/opt/sunstudio12.1/bin/../prod/bin/../../bin/cc": Sun C 5.10 SunOS_sparc 2009/06/03 version of "/opt/sunstudio12.1/bin/../prod/bin/../../bin/CC": Sun C++ 5.10 SunOS_sparc 2009/06/03 version of "/opt/sunstudio12.1/bin/../prod/bin/../../bin/f90": Sun Fortran 95 8.4 SunOS_sparc 2009/06/03 version of "/opt/sunstudio12.1/bin/../prod/bin/../../bin/dbx": Sun DBX Debugger 7.7 SunOS_sparc 2009/06/03 version of "/opt/sunstudio12.1/bin/../prod/bin/../../bin/analyzer": Sun Analyzer 7.7 SunOS_sparc 2009/06/03 version of "/opt/sunstudio12.1/bin/../prod/bin/../../bin/dmake": Sun Distributed Make 7.9 SunOS_sparc 2009/06/03 Regards -- [ Piotr Tarnowski piotr.tarnowski(a)us.edu.pl ] [ Unix Administrator at University of Silesia, Katowice, Poland ]

2 1

[Dovecot] What's behind the message ...
by Frank Elsner 29 Feb '12

29 Feb '12

... Warning: /media/Backup28a is no longer mounted. If this is intentional, remove it with doveadm mount Hello, the above message appeared when I restarted dovecot. What has dovecot to deal with my USB-Backup-Disk? Dovecot cares about filesystem without any relation to the mail system? Why this? What's bedind? Thanks in advance, Frank Elsner

2 2