- dovecot - dovecot.org

[Dovecot] Dovecot performance issues with many writes
by Andy Robbins 21 Nov '11

21 Nov '11

We are currently experiencing performance issue with our Dovecot system which we believe is caused by excessive writes to the dovecot files. The confusing thing is that we are seeing more writes than reads on our Dovecot volume when you would assume that most of the IO should be reads from customers checking their mail. We're seeing reads vs. writes similar to the following: # iostat -d 5 -x Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util dm-4 0.00 0.00 485.80 865.80 3886.40 6926.40 8.00 28.69 19.63 0.70 94.00 drbd0 0.00 0.00 485.80 865.80 3886.40 6926.40 8.00 111.42 94.44 0.74 99.60 We can't figure out why we would be seeing twice as many writes as we are reads. Could this have something to do with the index files? Appreciate any assistance on this issue.

5 10

[Dovecot] uid=error
by Paresh Chalke 21 Nov '11

21 Nov '11

Hi Timo, We are facing this issue on our mail server 1. Two email id's are mapped to a same account 2. If I send a mail to both the account simultaneously i get below error "Nov 21 12:13:37 blade8 dovecot: lda(kapil.gupta(a)qlc.in): save: box=INBOX, uid=error, msgid=<1321857820.4ec9f31ce638c(a)SwiftMailer.generated>, size=10921" 3. Due to this the mail is delivered only to 1 email id. 4. I am loosing all my mails. Kindly help in the same ASAP. Regards, Paresh Chalke

3 3

[Dovecot] Question about imaps
by jgiles＠cybermesa.com 21 Nov '11

21 Nov '11

Hi List! Had a questions about imap vs. imaps. I read the ssl article at http://wiki2.dovecot.org/SSL and from what I am reading, imaps is no longer needed as imap with initiate SSL/TLS on its own if STARTTLS is started and I have disable_plaintext_auth=yes and ssl=required settings. I do have SSL up and working, and can connect using imap (143) to my server without issue, but was not able to connect using imaps (993) using Kmail as my client. I Was getting a client error stating that the authentication failed using my password. However, there was nothing in the mail.err or mail.log file even when I enable debugging. If I specify imaps as my only protocol, then dovecot fails to even start without any error loging at all. As I stated, imap works just fine. So, is imaps deprecated as mentioned in the article and imaps no longer needed? I am running Dovecot 2.0.13 on an Ubuntu 11.10 64bit server. This server is simply an imap serer and not a MTA (No postfix or sendmail installed.) Thanks! Joe

4 4

[Dovecot] Iterate over domain
by Francisco Wagner C. Freire 21 Nov '11

21 Nov '11

Hello, We need to use doveadm commands on all accounts of a single domain, for now i need to query the database using scripts and for each one user, run doveadm. I can use iterate but, only for all server accounts, have any way to use doveadm iterate over a single domain? Thanks

2 1

[Dovecot] issues with 2.1b1 on OS X
by metro_domain_admin＠fastmail.fm 21 Nov '11

21 Nov '11

Two issues came up for me when building 2.1beta1 on OS X (10.5.8 on PPC). The first was already mentioned in an earlier thread by a BSD user (http://dovecot.org/list/dovecot/2011-September/061201.html) I just wanted to point out that the error is still occurring in spite of a new test for GNU ld in the configure script. I needed to remove "-no-undefined" specifically: #NOPLUGIN_LDFLAGS="-no-undefined" if test "$with_gnu_ld" = yes; then NOPLUGIN_LDFLAGS="$NOPLUGIN_LDFLAGS -Wl,--as-needed" fi More important, Dovecot aborts on launch with the following error: Nov 19 10:23:52 kerio2 dovecot[33553]: master: Fatal: kevent(EV_ADD, READ, 16) failed: Invalid argument I configured using the same args as I had used successfully on 2.0.15: --with-gssapi --with-ldap --with-sql --prefix=/opt/dovecot-2.X.X. I also tried an exact copy of my known-good config from 2.0.15, to no avail. Thanks, Tony

2 2

Re: [Dovecot] Mail_quota plugin and LDAP on Dovecot 1.2
by Victor 21 Nov '11

21 Nov '11

Thank a lot, your were completely in the truth Victor Onate

1 0

[Dovecot] Using google 2 step authentication
by Davide Cavion 20 Nov '11

20 Nov '11

Google authenticator has a PAM interface: http://code.google.com/p/google-authenticator/wiki/PamModuleInstructions Have someone tried implementing it onto Dovecot? It would be really great if you consider your emails important!

2 2

[Dovecot] Released Pigeonhole v0.2.5 for Dovecot v2.0.16
by Stephan Bosch 19 Nov '11

19 Nov '11

Hello Dovecot users, Before I move active development of Pigeonhole to Dovecot v2.1, I first release all the pending bug fixes and small improvements. Changelog v0.2.5: + Sieve vacation extension: made discard message for implicit delivery more verbose - The sieve-test tool: mixed up original and final envelope recipient in implementation of command line arguments. - Sieve vacation extension: resolved FIXME regarding the use of variables in the :handle argument. Variables are now handled correctly. - Sieve body extension: fixed handling of :content "message/rfc822". This now yields the headers of the embedded message as required by the specification. Handling of :content "multipart" remains to be fixed. - LDA Sieve plugin: fixed problem with recipient_delimiter configuration. Now it falls back to global recipient_delimiter setting if plugin/recipient_delimiter is not set. The release is available as follows: http://www.rename-it.nl/dovecot/2.0/dovecot-2.0-pigeonhole-0.2.5.tar.gz http://www.rename-it.nl/dovecot/2.0/dovecot-2.0-pigeonhole-0.2.5.tar.gz.sig Refer to http://pigeonhole.dovecot.org and the Dovecot v2.0 wiki for more information. Have fun testing this new release and don't hesitate to notify me when there are any problems. Regards, -- Stephan Bosch stephan(a)rename-it.nl

1 0

[Dovecot] CCing outbound IMAP mail?
by Dave Stevens 18 Nov '11

18 Nov '11

For some users on my site I'd like to be able to CC a particular user on all outgoing IMAP mails. Incoming I can do but don't see how to do outgoing. Ideas? Dave -- It is told that such are the aerodynamics and wing loading of the bumblebee that, in principle, it cannot fly...if all this be true...life among bumblebees must bear a remarkable resemblance to life in the United States. -- John Kenneth Galbraith, in American Capitalism: The Concept of Countervailing Power

3 2

[Dovecot] Mail_quota plugin and LDAP on Dovecot 1.2
by Victor 18 Nov '11

18 Nov '11

Hi, I'm new in this List, but I have 6 years using Dovecot on my debian from etch,lenny and now squeeze Package: dovecot-imapd Version: 1:1.2.15-4 Tags: squeeze -- System Information: Debian Release: 6.0 APT prefers stable APT policy: (500, 'stable') Architecture: amd64 (x86_64) Kernel: Linux 2.6.32-5-amd64 (SMP w/24 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Versions of packages dovecot-imapd depends on: ii dovecot-common 1:1.2.15-4 secure mail server that supports m ii libc6 2.11.2-10 Embedded GNU C Library: Shared lib ii libldap-2.4-2 2.4.23-7 OpenLDAP libraries ii libssl0.9.8 0.9.8o-4 SSL shared libraries the quota_imap plugin not working when I use against MailquotaSize Attribute of LDAP users. this setup works perfectly on lenny and dovecot-imapd 1:1.0.15-2.3 but on squeeze dovecot-imad 1:1.2.15-7 doesn't work, the service is up, but The quota does not display. In logs nothing happens the configuration in dovecot.conf below protocol imap { mail_plugins = quota imap_quota } protocol lda { mail_plugins = quota } userdb ldap { args = /etc/dovecot/dovecot-ldap.conf } the configuration in dovecot-ldap.conf below uris = ldap://server-ldap.com.ve auth_bind = yes ldap_version = 3 base = dc=dominio,dc=com,dc=uk deref = never scope = subtree user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid,mail=Maildir,mailQuotaSize=quota=dirsize:storage user_filter = (&(objectClass=posixAccount)(uid=%u)) pass_attrs = uid=user,userPassword=password,homeDirectory=userdb_home,uidNumber=userdb_uid,gidNumber=userdb_gid pass_filter = (&(objectClass=posixAccount)(uid=%u)) This is the same configuration in the 6 last years. So, I would really appreciate if give me a hand which are more than 15000 Users who administered easily taking the quota in the LDAP attribute. and I want to keep the scheme. Thz Victor Onate Usuario Linux

2 1