- dovecot - dovecot.org

Re: [Dovecot] newbie: can't login as virtual user
by Joseph Tam 28 Oct '11

28 Oct '11

sean darcy writes: > Oct 22 21:45:55 auth: Debug: passwd(test1(a)example.com, ): lookup > Oct 22 21:45:55 auth: Info: passwd(test1(a)example.com, ): unknown user > Oct 22 21:45:55 auth: Debug: passwd-file(test1(a)example.com, ): > lookup: user=test1(a)example.com file=/etc/dovecot/users > Oct 22 21:45:55 auth: Debug: master out: USER 2303328257 test1(a)example.com > Oct 22 21:45:55 imap-login: Info: Login: user=<test1(a)example.com>, > method=PLAIN, rip= , lip= , mpid=27062, TLS I think up to now it's OK (not quite sure about "master out" log entry but it looks innocuous enough). Dovecot reports to have looked in the system password file, failed, then looked in /etc/dovecot/users and found the user and logged them in. I think the problem happens later and you will have to show the subsequent log entries. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Temporary Failure that's Permanent!
by Jack Fredrikson 28 Oct '11

28 Oct '11

Hi; I continue to be plagued with this error: Oct 25 10:49:18 myserver postfix/pipe[3712]: 0423257901AB: to=<foo(a)bar.com>, relay=dovecot, delay=109318, delays=109318/0.14/0/0.1, dsn=4.3.0, status=deferred (temporary failure It's been a week that I've been working day and night to get this fixed. I forgot to add this information: [root]# doveconf -n auth_mechanisms = plain login first_valid_gid = 12 first_valid_uid = 86 mail_location = maildir:/var/vmail/%d/%u passdb { args = /usr/local/etc/dovecot/sql.conf driver = sql } plugin { quota = maildir:storage=10240:messages=1000 trash = /usr/local/etc/dovecot/trash.conf } protocols = imap pop3 service auth { unix_listener auth-userdb { group = postfix mode = 0660 user = postfix } user = root } ssl_cert = </etc/pki/tls/certs/mail.myserver.com.cert ssl_cipher_list = ALL:!LOW:!SSLv2 ssl_key = </etc/pki/tls/private/mail.myserver.com.key ssl_key_password = passwd userdb { args = /usr/local/etc/dovecot/sql.conf driver = sql } protocol imap { mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { hostname = myserver.com info_log_path = /var/log/dovecot-deliver.log log_path = /var/log/dovecot-deliver.log mail_plugins = quota postmaster_address = postmaster(a)creative.vi sendmail_path = /usr/sbin/sendmail.postfix } [root] # vi main.cf queue_directory = /var/spool/postfix myorigin = $mydomain command_directory = /usr/sbin daemon_directory = /usr/libexec/postfix mail_owner = postfix inet_interfaces = all unknown_local_recipient_reject_code = 550 debug_peer_list = sendmail_path = /usr/sbin/sendmail.postfix newaliases_path = /usr/bin/newaliases mailq_path = /usr/bin/mailq setgid_group = postdrop html_directory = no manpage_directory = /usr/local/man sample_directory = /etc/postfix readme_directory = no mydomain = myserver.com mydestination = $mydomain, $myhostname, localhost.$mydomain mail_spool_directory = /var/spool/mail home_mailbox = Mailbox disable_vrfy_command = yes show_user_unknown_table_name = no data_directory = /var/lib/postfix # --------------- local settings ------------------ myhostname = myserver.com inet_interfaces = localhost, $myhostname mynetworks = $config_directory/mynetworks #mydestination = localhost.$mydomain, localhost, $myhostname #uncomment if you need relay_domains... do not list domains in both relay and virtual relay_domains = proxy:mysql:$config_directory/mysql_relay_domains_maps.cf # ---------------------- VIRTUAL DOMAINS START ---------------------- virtual_mailbox_base = /var/vmail virtual_mailbox_domains = proxy:mysql:$config_directory/mysql_virtual_domains_maps.cf virtual_mailbox_maps = proxy:mysql:$config_directory/mysql_virtual_mailbox_maps.cf virtual_alias_maps = proxy:mysql:$config_directory/mysql_virtual_alias_maps.cf virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql_virtual_mailbox_limit_maps.cf virtual_minimum_uid = 89 virtual_uid_maps = static:89 virtual_gid_maps = static:89 virtual_transport = dovecot dovecot_destination_recipient_limit = 1 # ---------------------- VIRTUAL DOMAINS END ---------------------- # ---------------------- SASL PART START ---------------------- smtpd_sasl_auth_enable = yes smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_security_options = noanonymous broken_sasl_auth_clients = yes smtpd_sasl_type = dovecot smtpd_sasl_path = /var/spool/postfix/private/auth smtpd_sasl_application_name = smtpd # ---------------------- SASL PART END ---------------------- smtpd_soft_error_limit = 10 smtpd_hard_error_limit = 20 smtpd_helo_required = yes disable_vrfy_command = yes non_fqdn_reject_code = 504 invalid_hostname_reject_code = 450 maps_rbl_reject_code = 554 alias_maps = hash:/etc/aliases reject_unknown_client = false reject_unknown_hostname = false mailbox_command = /usr/local/libexec/dovecot/deliver -f "$SENDER" -a "$RECIPIENT" [root] # vi master.cf smtp inet n - n - - smtpd submission inet n - - - - smtpd -D -o smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes -o smtpd_sasl_type=dovecot -o smtpd_sasl_path=private/auth -o smtpd_sasl_security_options=noanonymous -o smtpd_sasl_local_domain=$myhostname -o smtpd_client_restrictions=permit_sasl_authenticated,reject -o smtpd_sender_login_maps=hash:/etc/postfix/virtual -o smtpd_sender_restrictions=reject_sender_login_mismatch -o smtpd_recipient_restrictions=reject_unknown_recipient_domain,reject_non_fqdn_recipient,permit_sasl_authenticated,reject amavisfeed unix - - n - 2 lmtp -o lmtp_data_done_timeout=1200 -o lmtp_send_xforward_command=yes -o disable_dns_lookups=yes -o max_use=20 587 inet n - n - - smtpd pickup fifo n - n 60 1 pickup cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap smtp unix - - n - - smtp relay unix - - n - - smtp -o fallback_relay= showq unix n - n - - showq error unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient} uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient retry unix - - n - - error proxywrite unix - - n - 1 proxymap dovecot unix - n n - - pipe flags=DRhu user=dovecot argv=/usr/local/libexec/dovecot/dovecot-lda -f ${sender} ${recipient} spamfilter unix - n n - - pipe flags=Rq user=spamfilter argv=/usr/local/bin/spamfilter -f ${sender} -- ${recipient} TIA, Jack

9 15

[Dovecot] newbie: can't login as virtual user
by sean darcy 27 Oct '11

27 Oct '11

dovecot -n # 2.0.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.38.8-32.fc15.i686.PAE i686 Fedora release 15 (Lovelock) auth_debug_passwords = yes disable_plaintext_auth = no info_log_path = /var/log/dovecot-info.log log_path = /var/log/dovecot.log mail_access_groups = mail mail_location = mbox:~/mail:INBOX=/var/spool/mail/%u mail_privileged_group = mail mbox_write_locks = fcntl passdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0666 user = postfix } } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } userdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } protocol lmtp { mail_plugins = quota sieve } cat /etc/dovecot/users .......... test1@example.com:{PLAIN}test1pass BUT, . OK Pre-login capabilities listed, post-login capabilities have more. a login test1(a)example.com test1pass * BYE Internal error occurred. Refer to server log for more information. closed From the server: Oct 22 21:45:53 auth-worker: Debug: passwd-file /etc/dovecot/users: Read 5 users Oct 22 21:45:53 auth-worker: Debug: pam(test1(a)example.com,www.xx.yy.zz): lookup service=dovecot Oct 22 21:45:53 auth-worker: Debug: pam(test1(a)example.com, ): #1/1 style=1 msg=Password: Oct 22 21:45:55 auth-worker: Info: pam(test1(a)example.com, ): unknown user Oct 22 21:45:55 auth: Debug: passwd-file(test1(a)example.com, ): lookup: user=test1(a)example.com file=/etc/dovecot/users Oct 22 21:45:55 auth: Debug: client out: OK 1 user=test1(a)example.com Oct 22 21:45:55 auth: Debug: master in: REQUEST 2303328257 27060 1 964b20421c19356f1cbdefbf976467e0 Oct 22 21:45:55 auth: Debug: passwd(test1(a)example.com, ): lookup Oct 22 21:45:55 auth: Info: passwd(test1(a)example.com, ): unknown user Oct 22 21:45:55 auth: Debug: passwd-file(test1(a)example.com, ): lookup: user=test1(a)example.com file=/etc/dovecot/users Oct 22 21:45:55 auth: Debug: master out: USER 2303328257 test1(a)example.com Oct 22 21:45:55 imap-login: Info: Login: user=<test1(a)example.com>, method=PLAIN, rip= , lip= , mpid=27062, TLS What's wrong with my configuration? Thanks, sean

1 0

[Dovecot] Configuring mbox and maildir formats - dovecot-1.2.15
by Albert E. Whale 27 Oct '11

27 Oct '11

I am transitioning an existing server from using exclusively mbox, to being able to support both mbox and then fully maildir formats. I need to support the mbox format until I can get everyone switched over to maildir. What do I need to to use in the config of /etc/dovecot.conf to support the default of mbox, and then the new Maildir format (users will get upgraded individually from mbox to Maildir, and need to be upgraded). Thank you. -- Albert E. Whale, CHS CISA CISSP Senior Technology & Security Director *ABS Computer Technology, Inc. * 412-635-7488 ext 100 aewhale(a)ABS-CompTech.com <mailto:aewhale@ABS-CompTech.com> www.ABS-CompTech.com <http://www.ABS-CompTech.com>

2 1

[Dovecot] variable for gid
by Limperis Antonis 26 Oct '11

26 Oct '11

Hi Is possible for a variable for gid of each user, such as %ifor uid . Thanks for your attention Antonis

2 1

[Dovecot] Marathon Day 6 of First Install: MySQL Connection Problem
by Jack Fredrikson 25 Oct '11

25 Oct '11

Hi; This is my 6th day installing my first Postfix/Dovecot installation. The Postfix mailing list indicates I've got the MTA under control so now I'm seeking your help with the MDA. I get these errors with legitimate email addresses: Oct 24 11:47:38 myserver dovecot: auth-worker: Error: mysql(localhost): Connect failed to database (postfix): Access denied for user 'dovecot'@'localhost' (using password: YES) - waiting for 25 seconds before retry Now I've logged in myself: mysql -u dovecot -p Enter password: xxx and succeeded. What am I doing wrong? I've noticed that every time I restart dovecot I get this error in the dovecot-deliver.log: Oct 24 11:31:11 lda: Error: userdb lookup: connect(/usr/local/var/run/dovecot/auth-userdb) failed: Permission denied (euid=512(vmail) egid=512(vmail) missing +r perm: /usr/local/var/run/dovecot/auth-userdb, dir owned by 0:0 mode=0755) Oct 24 11:31:11 lda: Fatal: Internal error occurred. Refer to server log for more information. Every time I go to chmod 666 on that file, restarting dovecot wipes those permissions. How fix? Even when I fix that, I still get the "temporary failure". Please advise. TIA, Jack

7 20

Re: [Dovecot] sieve-pipe Error
by Stephan Bosch 25 Oct '11

25 Oct '11

Op 25-10-2011 9:33, Ian Barton schreef: > On 24/10/11 23:33, Stephan Bosch wrote: >> On 10/24/2011 12:00 PM, Ian Barton wrote: >>> I am using Dovecot 2.0.15 on Arch. I have cloned the hg repo and >>> compiled the plugin using the following options: >>> >>> ./configure --with-dovecot=/usr/lib/dovecot >>> --with-pigeonhole=/usr/include/dovecot/sieve/ >>> >>> The relevant section of my dovecot.conf looks like: >>> >>> plugin { >>> sieve = ~/.dovecot.sieve >>> sieve_global_path = /home/vmail/globalsieverc >>> sieve_dir = ~/ >>> >>> sieve_plugins = sieve_pipe >>> # This directory contains the scripts that are available. >>> sieve_pipe_bin_dir = /usr/lib/dovecot/sieve-pipe >>> } >>> >>> When I restart Dovecot I get the following error: >>> >>> ian:dovecot/ $ sudo rc.d restart dovecot [10:50:53] >>> :: Stopping dovecot daemon [DONE] >>> :: Starting dovecot daemon [BUSY] managesieve: Fatal: >>> opendir(/usr/lib/dovecot/modules/sieve) failed: No such file or >>> directory >>> doveconf: Error: managesieve-login: dump-capability process returned 89 >> >> Apparently, the plugin is not installed in the correct location. Try >> supplying a --with-moduledir=/usr/lib/dovecot/modules . >> >> After make install, the /usr/lib/dovecot/modules/sieve directory should >> contain lib90_sieve_pipe_plugin.so. >> > > Thank you that worked. Now to test if it's working:) Please reply to the mailing list as well. Regards, Stephan.

1 0

[Dovecot] sieve-pipe Error
by Ian Barton 25 Oct '11

25 Oct '11

I am using Dovecot 2.0.15 on Arch. I have cloned the hg repo and compiled the plugin using the following options: ./configure --with-dovecot=/usr/lib/dovecot --with-pigeonhole=/usr/include/dovecot/sieve/ The relevant section of my dovecot.conf looks like: plugin { sieve = ~/.dovecot.sieve sieve_global_path = /home/vmail/globalsieverc sieve_dir = ~/ sieve_plugins = sieve_pipe # This directory contains the scripts that are available. sieve_pipe_bin_dir = /usr/lib/dovecot/sieve-pipe } When I restart Dovecot I get the following error: ian:dovecot/ $ sudo rc.d restart dovecot [10:50:53] :: Stopping dovecot daemon [DONE] :: Starting dovecot daemon [BUSY] managesieve: Fatal: opendir(/usr/lib/dovecot/modules/sieve) failed: No such file or directory doveconf: Error: managesieve-login: dump-capability process returned 89 Ian.

2 1

[Dovecot] xi.rename-it.nl down?
by Jim Knuth 25 Oct '11

25 Oct '11

Hello, is http://xi.rename-it.nl down? Apticron shows me permanently errors. -- Mit freundlichen Grüßen, with kind regards, Jim Knuth --------- Wenn ein wirklich großer Geist in der Welt erscheint, kann man ihn untrüglich daran erkennen, daß sich alle Dummköpfe gegen ihn verbünden. (Jonathan Swift)

3 5

[Dovecot] [bug] Changing dovecot 'quota' Value incorrectly overwrites Limit with same value
by Rich 24 Oct '11

24 Oct '11

I'm able to consistently reproduce this problem/behavior, but not workaround or fix it, yet. Rich On Wed, Oct 19, 2011 at 7:41 AM, Rich <pgnet.dev+rich-dovecot(a)gmail.com> wrote: > I've made some progress, but quota 'Limit' is still not fully > functioning for me. > > A couple of changes have helped: > > Specifying a "%u% as username format, > > /etc/dovecot/conf.d/90-quota.conf > plugin { > - quota = dict:User Quota::proxy::quota > + quota = dict:User Quota:%u:proxy::quota > quota_rule = *:bytes=1073741824:messages=10000 > quota_rule2 = Trash:storage=+10%% > } > > using 'username' rather than 'user' in the user iteration query > > /etc/dovecot/sql/virtmail-userdb-sql.cf > driver = mysql > connect = host=/var/run/mysql/mysql.sock dbname=my_db user=my_user > password=my_pass > user_query = CALL UserDBQuery('%n','%d'); > - iterate_query = SELECT `MAILBOX_user_domain` AS user FROM `PARAMS`; > + iterate_query = SELECT `MAILBOX_user_domain` AS username FROM `PARAMS`; > > and adding to my user_query, > > CREATE PROCEDURE `UserDBQuery`( > ... > SELECT ... > concat('*:bytes=', quota_bytes, ':messages=10000') AS quota_rule, > ... > > Now, at init, > > doveadm quota get -A > Username Quota name Type Value Limit % > myuser(a)domain1.com User quota STORAGE 0 0 0 > myuser(a)domain1.com User quota MESSAGE 0 10000 0 > myuser(a)domain2.com User quota STORAGE 0 0 0 > myuser(a)domain2.com User quota MESSAGE 0 10000 0 > > mysql> select * from PARAMS; > +----+------------------------+------------+-------------+ > | ai | MAILBOX_user_domain | quota_bytes | quota_msgs | > +----+------------------------+-------------+------------+ > | 1 | myuser(a)domain1.com | 0 | 0 | > | 2 | myuser(a)domain2.com | 0 | 0 | > +----+------------------------+------------+-------------+ > 2 rows in set (0.00 sec) > > and, after sending a single message to 'myuser(a)domain1.com', I do see > that Dovecot now recognizes/calculates a quota change, and only for > one domain, > > doveadm quota get -A > Username Quota name Type Value Limit % > myuser(a)domain1.com User quota STORAGE 3 3 100 > myuser(a)domain1.com User quota MESSAGE 1 10000 0 > myuser(a)domain2.com User quota STORAGE 0 0 0 > myuser(a)domain2.com User quota MESSAGE 0 10000 0 > > mysql> select * from PARAMS; > +----+------------------------+------------+-------------+ > | ai | MAILBOX_user_domain | quota_bytes | quota_msgs | > +----+------------------------+-------------+------------+ > | 1 | myuser(a)domain1.com | 3269 | 1 | > | 2 | myuser(a)domain2.com | 0 | 0 | > +----+------------------------+------------+-------------+ > 2 rows in set (0.00 sec) > > > But, the Limit's wrong. It's not picking up the global Limit from > > /etc/dovecot/conf.d/90-quota.conf > ... > --> quota_rule = *:bytes=1073741824:messages=10000 > ... > > and once a message quota Value is calculated, the Limit is set == > Value, resulting in an incorrrect quota %-age of 100%. > > Is Limit supposed to be specified per-user? > > Rich >

1 0