- dovecot - dovecot.org

[Dovecot] Dovecot-Antispam 2.0 with SpamAssassin (sa-learn)
by Nick Rosier 18 Aug '11

18 Aug '11

Hi, has anyone figured out how to use the dovecot-antispam plugin with sa-learn? I need to pass the username (user(a)domain.tld) to sa-learn and --ham or --spam depending on the move. I was thinking of using the CRM14 option and replace the command and arguments but cannot find anything about the ability to pass the username. Any pointers would be welcome. N.

3 4

[Dovecot] May Dovecot help in users education
by Alexandre Chapellon 18 Aug '11

18 Aug '11

Hello, I was wondering if dovecot could help me in my project to smoothly make all my users switch to TLS encrypted POP / IMAP sessions and forget about cleartext. My first idea was to setup dovecot as a POP/IMAP proxy for my mailhosts and ask dovecot to display a warning message or slowdown non TLS sessions. Is there any way to achieve this with dovecot? Does anybody have another idea smoothly force used to switch to TLS? Regards. -- <http://www.horoa.net>

4 6

[Dovecot] invalid credential using openldap
by Daminto Lie 17 Aug '11

17 Aug '11

Hi, What I have been trying to achieve is to be able to authenticate users through openLDAP while using Postfix, Dovecot as IMAP server and squirrelmail. I keep getting the following error messages when trying to login to squirrelmail 2011-08-17 12:27:59 auth(default): Info: client in: AUTH 1 PLAIN service=imap secured lip=127.0.0.1 rip=127.0.0.1 lport=143 rport=57794 resp=AGFkbWluAGFwbXg2c3Bu 2011-08-17 12:27:59 auth(default): Info: ldap(myuser,127.0.0.1): invalid credentials (given password: xxx) 2011-08-17 12:28:00 auth(default): Info: new auth connection: pid=1921 2011-08-17 12:28:01 auth(default): Info: client out: FAIL 1 user=myuser 2011-08-17 12:28:06 imap-login: Info: Aborted login (auth failed, 1 attempts): user=<myuser>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured This seems to be trivial but I just could not figure out what else went wrong. I wonder if anyone might be able to give me a bit of help as I'm still learning my way around under linux system environment. The following is what I have in /etc/dovecot/dovecot-slapd.conf hosts = localhost dn = cn=myadmin,dc=mycompany,dc=com dnpass = secrets auth_bind = yes auth_bind_userdn = cn=%u,ou=people,dc=mycompany,dc=com ldap_version = 3 base = ou=people, dc=pbj, dc=com, dc=au scope = subtree user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid user_filter = (&(objectClass=posixAccount)(uid=%u)) pass_attrs = uid=user,userPassword=password pass_filter = (&(objectClass=posixAccount)(uid=%u)) Thank you in advance

1 0

[Dovecot] Dovecot-2.0.14?
by David Favor 17 Aug '11

17 Aug '11

ETA on 2.0.14? -- Love feeling your best ever, all day, every day? Click http://RadicalHealth.com for the easy way!

2 1

[Dovecot] maildirsize not always present
by Jean-Max Reymond 17 Aug '11

17 Aug '11

hi, I have a dovecot 1.2.9 and all is runnig fine except for quotas. Some accounts have a maildirsize file in the mail directory. If I delete the file, it is automatically rebuild: OK But other accounts does not have the maildirsize file even after access from dovecot server. All is OK for theses accounts except quota service. what's wrong ? -- Jean-Max Reymond Éruption de l'Etna: http://jmreymond.free.fr/Etna2002

3 7

[Dovecot] dovecot 2.0.13 fd_send(imap, 15) failed, dovecot 1.2.16 fd_send(10) failed
by Spod Letela 17 Aug '11

17 Aug '11

Hi, I am reinstalling my server and i have encoutered a strange problem, both dovecot 2.0.13 and 1.2.16 are reporting me a problem with fd_send Invalid argument on imap login. I am running dragonfly bsd 2.10.1., compiled dovecot from pkgsrc. Can someone help me out or at least point me in some direction, i am a bit lost... :( Aug 15 10:01:00 master: Info: Dovecot v2.0.13 starting up Aug 15 10:01:10 auth: Debug: Loading modules from directory: /usr/pkg/lib/dovecot/auth Aug 15 10:01:10 auth: Debug: auth client connected (pid=1206) Aug 15 10:01:10 auth: Debug: client in: AUTH 1 PLAIN service=imap secured lip=127.0.0.1 rip=127.0.0.1 lport=143 rport=1032 resp=x Aug 15 10:01:10 auth: Debug: Loading modules from directory: /usr/pkg/lib/dovecot/auth Aug 15 10:01:10 auth: Debug: passwd(y,127.0.0.1): lookup Aug 15 10:01:10 auth: Debug: client out: OK 1 user=y Aug 15 10:01:10 imap-login: Error: fd_send(imap, 15) failed: Invalid argument Aug 15 10:01:10 auth: Debug: client in: CANCEL 1 Aug 15 10:01:10 imap-login: Info: Internal login failure (pid=1206 id=1) (auth failed, 1 attempts): user=<y>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Aug 15 11:01:27 master: Warning: Killed with signal 15 (by pid=0 uid=0 code=kill) Aug 16 01:55:45 dovecot: Info: Dovecot v1.2.16 starting up Aug 16 01:56:35 imap-login: Fatal: fd_send(10) failed: Invalid argument Aug 16 08:22:29 dovecot: Warning: Killed with signal 15 (by pid=0 uid=0 code=kill) Aug 16 08:22:31 dovecot: Info: Dovecot v1.2.16 starting up Aug 16 08:22:48 imap-login: Fatal: fd_send(10) failed: Invalid argument

2 1

[Dovecot] Slackware Dovecot recompile with SSL/TLS question
by CopalFreak 16 Aug '11

16 Aug '11

I am having some problems and was told to ask in this list to try and get some help. When asking elsewhere, I was told that I was too verbose, so I'll try to be as brief as possible, while still including all the pertinent info. Slackware 13.1.0 Dovecot 2.0.8 Postfix 2.4.3 MySQL (virtual users) Spamassassin 3.3.1 ClamAV 0.97.1 (without Amavis) Have wild-card SSL certs and CA from GoDaddy ##"postconf -a" >> cyrus >> dovecot I compiled Dovecot without SASL support and need to re-compile it WITH SASL support, but I don't want to mess up my existing configuration. (I have it the way I want it as far as where it's installed, where the conf files are located, UID, GID settings, etc.) Dovecot 2.0.13 is out and I would prefer to use the newer version assuming it doesn't have any problems that would prevent me from using it. Is there a way to re-compile (or upgrade) so that it doesn't change any of my existing settings? I would like to be able to bring it down, do upgrade, maybe copy some config files over the defaults etc, and bring it all back up within a few minutes instead of a week of tweaking and fixing stuff. Is there a way to do something like this : stop dovecot backup all dovecot conf files ./configure CPPFLAGS=-I/path/to/openssl LDFLAGS=-L/path/to/openssl --config_dir /etc/dovecot/dovecot.conf (or something like that..not sure what it actually is) make sudo make install edit conf files to point to SSL certs start dovecot IN CASE anything goes wrong, copy old config files back and restart dovecot to make it go back the way it was (only it's using the new 2.0.13 version) any suggestions and/or tips on how-to do this would be greatly appreciated. Thanks!

2 2

[Dovecot] Sieve include
by Andrea Cappelli 16 Aug '11

16 Aug '11

Hi, I'm using dovecot 1.2.15 with ISPConfig and Roundcube with sieve plugin. To avoid conflicts between ISPConfig and Roundcube during script writing I would use include in the ISPconfig template to use the roundcube script To simplify this task I'm wondering if there is a way to have a "star include", like include :personal "*.sieve"; Thank you Andrea

2 2

[Dovecot] mbox originally needed 0 bytes, now needs maxint bytes
by Mike Brown 16 Aug '11

16 Aug '11

I'm running dovecot 1.2.16 from the ports collection on FreeBSD 8.1-STABLE, amd64. I've long been getting the following in my logs, seemingly at random (so, only sometimes), when I access or move mail into mboxes: Aug 16 00:43:58 myhost dovecot: IMAP(mike): mbox /home/mike/mail/feedback: seq=88 uid=91 uid_broken=0 originally needed 0 bytes, now needs 18446744073709551615 bytes Whatever I'm trying to do always succeeds, but apparently dovecot is confused about something. That number (2^64-1) suggests it has to do with the amd64 architecture. Did a compile option get overlooked? Let me know if there's anything I need to do to get rid of these warnings. Thanks, Mike

1 1

[Dovecot] mbox originally needed 0 bytes, now needs maxint bytes
by Mike Brown 16 Aug '11

16 Aug '11

I'm running dovecot 1.2.16 from the ports collection on FreeBSD 8.1-STABLE, amd64. I've long been getting the following kind of messages in my logs, on random occasions when I access or move mail into mboxes: Aug 16 00:43:58 myhost dovecot: IMAP(mike): mbox /home/mike/mail/feedback: seq=88 uid=91 uid_broken=0 originally needed 0 bytes, now needs 18446744073709551615 bytes Whatever I'm trying to do always succeeds, but apparently dovecot is confused about something. That number (2^64-1) suggests it has to do with the amd64 architecture. Did a compile option get overlooked? Thanks for whatever you can suggest. Let me know if you need more info.

1 0