- dovecot - dovecot.org

[Dovecot] Internal Error form delivery from LDAP lookup.
by Jorgen Lundman 06 Dec '10

06 Dec '10

Solaris-x86-10u8 Dovecot-1.2.7 Large mail setup, with quite a few MX servers working well. Generally everything is super. But every now and then, we get "bouts of bad weather" - which only lasts a short time, and curiously nearly always occur when mail is sent to customer mailing lists. I suspect mostly because of that 1 message has multiple recipients within the same domain. Perhaps. Delivery setup as: main.cf: virtual_transport = dovecot dovecot_destination_recipient_limit = 1 dovecot_destination_concurrency_limit=300 master.cf: dovecot unix - n n - 70 pipe flags=DRhu user=dovecot:dovecot argv=/usr/local/libexec/dovecot/deliver -f ${sender} -d ${recipient} Errors look something like: example.com Dec 06 08:46:25 deliver(rbc-005(a)example.com): Info: msgid=<A22A602A940A45A49EA2C4CC53D27655(a)UQC.local>: saved mail to INBOX Dec 06 08:46:25 deliver(rbc-002(a)example.com): Info: msgid=<A22A602A940A45A49EA2C4CC53D27655(a)UQC.local>: saved mail to INBOX Dec 06 08:46:28 deliver(rbc-004(a)example.com): Error: userdb lookup(rbc-004(a)example.com) failed: Internal failure Dec 06 08:46:28 deliver(rbc-011(a)example.com): Error: userdb lookup(rbc-011(a)example.com) failed: Internal failure Dec 06 08:46:28 deliver(rbc-013(a)example.com): Error: userdb lookup(rbc-013(a)example.com) failed: Internal failure Dec 06 08:46:28 deliver(rbc-006(a)example.com): Error: userdb lookup(rbc-006(a)example.com) failed: Internal failure Later on, when it retries, everything goes according to plan and delivery is achieved. Now this is actually due to slapd saying: Dec 6 08:46:25 vmx15.unix slapd[3958]: [ID 763815 local4.debug] connection_input: conn=72057 deferring operation: too many executing And since it happens most frequently with mailing-lists, or mails with many recipients, I would guess it is due to a large number of lookups happening in a very short time. Since dovecot_destination_recipient_limit=1, I believe 'deliver' is only ever called with just one recipient for "-d", and 'deliver' probably-does-not (?) query LDAP for any of the other "To:" addresses in the message body. Is that the case? Secondary, the dovecot-ldap.conf for dovecot-auth has: hosts = 127.0.0.1 172.20.12.33 172.20.12.23 172.20.12.113 So even though localhost's slapd was busy at the time, the other three hosts were definitely not. Is LDAP fail-over ... failing... in this case? How many concurrent queries does dovecot-auth perform? Any way to tweak this value? Admittedly, postfix/dovecot does handle this situation correctly, as 'temporary failure' and mail delivery is merely delayed. But at the same time, it *could* be something with an easy fix as well. Thoughts? Lund -- Jorgen Lundman | <lundman(a)lundman.net> Unix Administrator | +81 (0)3 -5456-2687 ext 1017 (work) Shibuya-ku, Tokyo | +81 (0)90-5578-8500 (cell) Japan | +81 (0)3 -3375-1767 (home)

2 6

Re: [Dovecot] Doveadm import emails
by Timo Sirainen 06 Dec '10

06 Dec '10

On 5.12.2010, at 14.47, Alex Baule wrote: > I have a maildir with 6800 emails and i try to import this to 1000 users. > The import begins well, but in the user 150 the script stop because doveadm > say the directory have wrong file permissions, but the script dont change > notthing and the permissions its ok. What exactly is the error message? Is it always the same specific user, or if you reorder users is it always the 150th?

1 0

[Dovecot] Dovecot v2.1 plans
by Timo Sirainen 06 Dec '10

06 Dec '10

Now that v2.0 seems to be getting stable, I finally started v2.1 branch: http://hg.dovecot.org/dovecot-2.1/ So far there are just some API changes to fix some annoyances and to make it simpler. They'll probably keep coming for a while more to make future work easier. As for larger upcoming features, I'm hoping for: - simplify index files and make it write only via lib-fs (but keep backwards compatibility & make v2.0 forwards compatible) - make lib-storage API support asynchronous and support parallel lookups - use async disk io as much as possible & get rid of all lock waits inside lib-storage -> it'll be ok to have lots of imap/pop3 connections per process, at least for some storage backends - write imap-client lib-storage backend (make it fast using above async stuff - using configurable number of IMAP connections) - this could maybe also be used to access other users' shared mailboxes when it can't be done directly - design a mailbox format (maybe based on dbox) for key-value databases, implement it via lib-fs and implement a lib-fs backend for one such database - merge Apple's CATENATE and URLAUTH patch But if some company desperately wants me to work on other stuff, that list can change. BTW. I'm moving back to Finland in two weeks. Maybe I'll also get some studying done towards my Master's degree. :)

1 0

[Dovecot] Centos 5.5 upgrade to dovecot 1.2
by Agim Cami 06 Dec '10

06 Dec '10

Hello, I am trying to upgrade dovecot from 1.0.7 (the dovecot verison in base repo) to 1.2. The installation of .rpm got from atrpms.net aborted with a dependency error : error: Failed dependencies: libpq.so.5()(64bit) is needed by dovecot-1.2.16-1_114.el5.x86_64 This is strange because the libraries are there : yum list libpq* Installed Packages libpqxx.x86_64 2.6.9-3.el5.rf installed libpqxx-devel.x86_64 2.6.9-3.el5.rf installed Any advice on this ? Thanks! Hello, I am trying to upgrade dovecot from 1.0.7 (the dovecot verison in base repo) to 1.2. The installation of .rpm got from atrpms.net aborted with a dependency error : error: Failed dependencies: libpq.so.5()(64bit) is needed by dovecot-1.2.16-1_114.el5.x86_64 This is strange because the libraries are there : yum list libpq* Installed Packages libpqxx.x86_64 2.6.9-3.el5.rf installed libpqxx-devel.x86_64 2.6.9-3.el5.rf installed Any advice on this ? Thanks! Hello, I am trying to upgrade dovecot from 1.0.7 (the dovecot verison in base repo) to 1.2. The installation of .rpm got from atrpms.net aborted with a dependency error : error: Failed dependencies: libpq.so.5()(64bit) is needed by dovecot-1.2.16-1_114.el5.x86_64 This is strange because the libraries are there : yum list libpq* Installed Packages libpqxx.x86_64 2.6.9-3.el5.rf installed libpqxx-devel.x86_64 2.6.9-3.el5.rf installed Any advice on this ? Thanks! Hello, I am trying to upgrade dovecot from 1.0.7 (the dovecot verison in base repo) to 1.2. The installation of .rpm got from atrpms.net aborted with a dependency error : error: Failed dependencies: libpq.so.5()(64bit) is needed by dovecot-1.2.16-1_114.el5.x86_64 This is strange because the libraries are there : yum list libpq* Installed Packages libpqxx.x86_64 2.6.9-3.el5.rf installed libpqxx-devel.x86_64 2.6.9-3.el5.rf installed Any advice on this ? Thanks! Hello, I am trying to upgrade dovecot from 1.0.7 (the dovecot verison in base repo) to 1.2. The installation of .rpm got from atrpms.net aborted with a dependency error : error: Failed dependencies: libpq.so.5()(64bit) is needed by dovecot-1.2.16-1_114.el5.x86_64 This is strange because the libraries are there : yum list libpq* Installed Packages libpqxx.x86_64 2.6.9-3.el5.rf installed libpqxx-devel.x86_64 2.6.9-3.el5.rf installed Any advice on this ? Thanks! Hello, I am trying to upgrade dovecot from 1.0.7 (the dovecot verison in base repo) to 1.2. The installation of .rpm got from atrpms.net aborted with a dependency error : error: Failed dependencies: libpq.so.5()(64bit) is needed by dovecot-1.2.16-1_114.el5.x86_64 This is strange because the libraries are there : yum list libpq* Installed Packages libpqxx.x86_64 2.6.9-3.el5.rf installed libpqxx-devel.x86_64 2.6.9-3.el5.rf installed Any advice on this ? Thanks! Hello, On a Centos 5.5 installation, I am trying to upgrade dovecot from 1.0.7 (the dovecot verison in base repo) to 1.2. The installation of .rpm got from atrpms.net aborted with a dependency error : error: Failed dependencies: libpq.so.5()(64bit) is needed by dovecot-1.2.16-1_114.el5.x86_64 This is strange because the libraries are there : yum list libpq* Installed Packages libpqxx.x86_64 2.6.9-3.el5.rf installed libpqxx-devel.x86_64 2.6.9-3.el5.rf installed Any advice on this ? Thanks!

3 2

Re: [Dovecot] Dovecot 1.2.16 compiling error
by Timo Sirainen 05 Dec '10

05 Dec '10

On 3.12.2010, at 8.36, Mart Pirita wrote: > RedHat 9 based distro, 2.6.24.2 kernel, OpenSSL 1.0.0a 1 Jun 2010 Hmm. v1.0.0a, really?.. > /usr/src/redhat/BUILD/dovecot-1.2.16/src/login-common/ssl-proxy-openssl.c:950: undefined reference to `OpenSSL_add_all_algorithms' I just hate OpenSSL. You can comment out that line from the code until I figure out what to do about this. That function was supposed to have existed since forever in OpenSSL. Or did the compiling log any warnings?

4 25

[Dovecot] 2.0.8 & enable-header-install
by Tamsy 05 Dec '10

05 Dec '10

Dear List, up to Dovecot 2.07 I used "--enable-header-install" for the Sieve Plugin when configuring Dovecot before compiling. With 2.0.8 I get the following message when running the configure script: "configure: WARNING: unrecognized options: --enable-header-install" Is this intentionally? Is there a substitute directive for Sieve when compiling Dovecot 2.08? Rgds Tamsy

2 2

[Dovecot] Strange config behaviour while using /etc/dovecot/auth.d/somename.auth
by Mark Alan 04 Dec '10

04 Dec '10

While using Ubuntu 10.10 + Dovecot 1.2.12 + Postfix 2.7.1-1: To export the authentication interface to Postfix, besides the usual smtpd_sasl_* lines at postfix, I am using: the following /etc/dovecot/auth.d/somename.auth file: socket listen { client { path = /var/spool/postfix/private/auth-client mode = 0660 user = postfix group = postfix } } But after restarting dovecot and doing a 'sudo dovecot -n' I get: ... socket: type: listen client: path: /var/spool/postfix/private/auth-client mode: 432 user: postfix group: postfix As 660<>432, is this Dovecot 1.2.12's expected behaviour? Thank you. M.

2 2

[Dovecot] Passwords not returned without auth_bind ?
by Mohit Chawla 04 Dec '10

04 Dec '10

Hi, Maybe I am missing something simple, but I can't get users authenticated using password lookups, as opposed to auth_bind. This is how the log looks like when using password lookup: dovecot: auth(default): new auth connection: pid=2449 dovecot: auth(default): client in: AUTH#0111#011PLAIN#011service=imap#011secured#011lip=127.0.0.1#011rip=127.0.0.1#011lport=143#011rport=43458#011resp=<hidden> dovecot: auth(default): ldap(foo,127.0.0.1): pass search: base=uid=foo,ou=people,dc=djb,dc=hell,dc=qua scope=base filter=(accountStatus=noaccess) fields=(none) slapd[1834]: conn=1083 op=1 SRCH base="uid=foo,ou=people,dc=djb,dc=hell,dc=qua" scope=0 deref=0 filter="(accountStatus=noaccess)" slapd[1834]: conn=1083 op=1 SRCH attr=(none) slapd[1834]: conn=1083 op=1 SEARCH RESULT tag=101 err=0 nentries=0 text= dovecot: auth(default): ldap(foo,127.0.0.1): unknown user dovecot: auth(default): ldap(foo,127.0.0.1): pass search: base=ou=people,dc=djb,dc=hell,dc=qua scope=subtree filter=(accountStatus=active) fields=uid,userPassword,homeDirectory,uidNumber,gidNumber,mailQuotaSize slapd[1834]: conn=1084 op=1 SRCH base="ou=people,dc=djb,dc=hell,dc=qua" scope=2 deref=0 filter="(accountStatus=active)" slapd[1834]: conn=1084 op=1 SRCH attr=uid userPassword homeDirectory uidNumber gidNumber mailQuotaSize dovecot: auth(default): ldap(foo,127.0.0.1): result: uid(user)=foo uidNumber(userdb_uid)=1008 gidNumber(userdb_gid)=1008 homeDirectory(userdb_home)=/home/foo mailQuotaSize(userdb_quota_rule=*:bytes=%$)=*:bytes=10000000 dovecot: auth(default): ldap(foo,127.0.0.1): No password returned (and no nopassword) slapd[1834]: conn=1084 op=1 SEARCH RESULT tag=101 err=0 nentries=1 text= dovecot: auth(default): client out: FAIL#0111#011user=foo *dovecot-ldap.pass* uris = ldap://10.5.3.101 dn = uid=dove,ou=people,dc=djb,dc=hell,dc=qua dnpass = debian auth_bind = no ldap_version = 3 base = ou=people,dc=djb,dc=hell,dc=qua scope = subtree pass_filter = (accountStatus=active) pass_attrs = uid=user,userPassword=password,\ homeDirectory=userdb_home,uidNumber=userdb_uid,gidNumber=userdb_gid,mailQuotaSize=userdb_quota_rule=*:bytes=%$ *dovecot-ldap.deny* uris = ldap://10.5.3.101 ldap_version = 3 base = uid=%u,ou=people,dc=djb,dc=hell,dc=qua scope = base auth_bind = no pass_filter = (accountStatus=noaccess) pass_attrs = (none) *dovecot.conf* # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-3-686 i686 Debian squeeze/sid log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap managesieve listen(default): * listen(imap): * listen(managesieve): *:2000 ssl: no disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_privileged_group: mail mail_location: maildir:~/Maildir mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): quota mail_plugins(imap): quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve managesieve_logout_format(default): bytes=%i/%o managesieve_logout_format(imap): bytes=%i/%o managesieve_logout_format(managesieve): bytes=%i%o lda: postmaster_address: bar(a)djb.hell.qua mail_plugins: quota sieve deliver_log_format: msgid=%m: %$ sendmail_path: /usr/lib/sendmail log_path: /var/log/ldaone info_log_path: /var/log/ldatwo debug: yes auth default: debug: yes passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.deny deny: yes passdb: driver: ldap args: /etc/dovecot/dovecot-ldap.pass userdb: driver: prefetch userdb: driver: ldap args: /etc/dovecot/dovecot-ldap.user socket: type: listen master: path: /var/run/dovecot/auth-master mode: 438 plugin: quota: maildir sieve: ~/.dovecot.sieve sieve_dir: ~/sieve

2 5

[Dovecot] SIS errors - was Error from mobile client (Palm Pre)
by Daniel L. Miller 04 Dec '10

04 Dec '10

Continuing to see errors on this with some new messages. Is it possible this has anything to do with zlib plugin, or possibly having a mix of zlib compressed & uncompressed messages with mdbox? I recently added zlib to deliver plugin list. -- Daniel L. Miller, VP - Engineering, SET AM Fire & Electronic Services, Inc. [AMFES] dmiller(a)amfes.com 702-312-5276

2 15

[Dovecot] typo
by Mike Abbott 04 Dec '10

04 Dec '10

Typo on line 292 of src/lib-master/master-login-auth.c in 2.0.8: tuah.

2 1