- dovecot - dovecot.org

[Dovecot] dovecot sieve enotify question
by Robert Schetterer 13 Nov '10

13 Nov '10

Hi, sorry not dovecot but heres the question is it possible to use dovecot sieve enotify not only for notify mail i.e arrived but with add the incomming mail as attachment to the notification ? i.e. i have found a example require ["enotify", "fileinto", "variables"]; if header :contains "X-Spam-Flag" "YES" { set "from_addr" "admin(a)example.com"; set "subject" "Spam"; notify :message "${from_addr}: ${subject}" "mailto:user@example.com"; } is there a way to add the orginal mail as attach to the notfication mail , and finally perhaps delete it this would like a redirect/forward with right from_addr ( which should always be the default mailboxname/emailaddress -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

2 2

[Dovecot] squirrelmail inbox empty
by Paul Cartwright 12 Nov '10

12 Nov '10

I am running Dovecot + Postfix +Squirrelmail on Debian Lenny.Fetchmail pulls the mail, dovecot spreads it around. I had squirrelmail setup & I tested it from within my router ( internal LAN). yesterday I had to go babysit my grand daughter, and I setup port forward for IMAP port 143, and I can use squirrelmail through firefox on my laptop. All the other folders have all the mail from the time I left til now. Yesterday I was reading inbpox mail, deleted a few junks, etc, and suspended my laptop. When I came back my inbox was empty, and I've never seen any more messages in it. I know I should have LOTS of older+new messages that don't get filtered. Unfortunately ssh doesn't seem to work from this linux side, it does from the windos side ( ssh keys?), so I can't get in to look at the logs.. I already removed ( I think ) all the inbox index files... & restarted, but no joy. I am not sure if it is getting filtered from the ibox, or if I just can't see it. I am not familiar with how squirrelmail works with local IMAP folders, so I am unsure where to look or what logs to browse. I will be home later today. suggestions clues or otherwise?? -- Paul Cartwright

2 1

[Dovecot] dovecot startup error message
by Spyros Tsiolis 12 Nov '10

12 Nov '10

Hello kind people, Any help on this would be appreciated. Dovecot v1.2.16. Freshly installed today. Comes up with this during service startup (CentOS 5.5 -> "service dovecot start" <ENTER> : --------------------------- Restarting DovecotFatal: ssl_listen: Can't resolve address required: Name or service not known --------------------------- Here's "dovecot -n" : --------------------------- # 1.2.16: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.17.4.el5 i686 CentOS release 5.5 (Final) ext3 base_dir: /var/run/dovecot/ log_path: /var/log/dovecot/dovecot.log info_log_path: /var/log/dovecot/dovecot-info.log ssl_listen: required ssl_parameters_regenerate: 48 verbose_ssl: yes login_dir: /var/run/dovecot//login login_executable: /usr/local/dovecot/libexec/dovecot/imap-login login_greeting: * Dovecot ready * login_max_processes_count: 32 mail_location: maildir:/var/MailRoot/domains/%d/%n/Maildir mail_plugins: zlib auth default: verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: /etc/dovecot/passwd passdb: driver: pam userdb: driver: static args: uid=vmail gid=vmail home=/home/vmail/%u userdb: driver: passwd --------------------------- Any help would greatly appreciated as this is a _live_ system and was supposed to work hours ago (whoooops !) :-) thank you kindly, spyros ---- "I merely function as a channel that filters music through the chaos of noise" - Vangelis

4 4

[Dovecot] Fw: dovecot startup error message - RESOLVED (?)
by Spyros Tsiolis 12 Nov '10

12 Nov '10

Hello , Went to /etc/dovecot/dovecot.conf, hunted down "ssl_listen =" which I had set it up to "ssl_listen = required" and commented it out. Tried "service dovecot start" and it started. The USD2,000,000 question being : what does this do (I know , I know, I cannot remember, I documented all this for v1.2.14) and will I need it in the future ? THank you people, spyros ---- "I merely function as a channel that filters music through the chaos of noise" - Vangelis --- On Fri, 12/11/10, Spyros Tsiolis <stsiol(a)yahoo.co.uk> wrote: > From: Spyros Tsiolis <stsiol(a)yahoo.co.uk> > Subject: [Dovecot] dovecot startup error message > To: "Dovecot" <dovecot(a)dovecot.org> > Date: Friday, 12 November, 2010, 20:15 > Hello kind people, > > Any help on this would be appreciated. > > Dovecot v1.2.16. Freshly installed today. Comes up with > this during > service startup (CentOS 5.5 -> "service dovecot start" > <ENTER> : > > --------------------------- > Restarting DovecotFatal: ssl_listen: Can't resolve address > required: Name or service not known > --------------------------- > > Here's "dovecot -n" : > > --------------------------- > # 1.2.16: /etc/dovecot/dovecot.conf > # OS: Linux 2.6.18-194.17.4.el5 i686 CentOS release 5.5 > (Final) ext3 > base_dir: /var/run/dovecot/ > log_path: /var/log/dovecot/dovecot.log > info_log_path: /var/log/dovecot/dovecot-info.log > ssl_listen: required > ssl_parameters_regenerate: 48 > verbose_ssl: yes > login_dir: /var/run/dovecot//login > login_executable: > /usr/local/dovecot/libexec/dovecot/imap-login > login_greeting: * Dovecot ready * > login_max_processes_count: 32 > mail_location: maildir:/var/MailRoot/domains/%d/%n/Maildir > mail_plugins: zlib > auth default: > verbose: yes > debug: yes > debug_passwords: yes > passdb: > driver: passwd-file > args: /etc/dovecot/passwd > passdb: > driver: pam > userdb: > driver: static > args: uid=vmail gid=vmail > home=/home/vmail/%u > userdb: > driver: passwd > --------------------------- > > Any help would greatly appreciated as this is a _live_ > system > and was supposed to work hours ago (whoooops !) :-) > > thank you kindly, > > spyros > > > > > > > > ---- > "I merely function as a channel that filters > music through the chaos of noise" > - Vangelis > > > >

2 1

[Dovecot] Occasional fchown errors?
by Knute Johnson 12 Nov '10

12 Nov '10

Hi: I get the occasional error below. Is there something I don't have configured correctly? Or should I just ignore this? It is not always this file, sometimes it is the cache.lock file or the log.newlock file. I have a mail client running on my computer and my phone at the same time, could that have something to do with it? Nov 10 08:32:59 rabbitbrush dovecot: IMAP(bob): fchown(/home/bob/mail/.imap/INBOX/dovecot.index.tmp, -1, 8(mail)) failed: Operation not permitted (egid=1000(bob), group based on /var/mail/bob) From dovecot -n # 1.2.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-25-generic i686 Ubuntu 10.04.1 LTS log_timestamp: %Y-%m-%d %H:%M:%S protocols: imaps ssl_cert_file: /etc/ssl/certs/ssl-cert-snakeoil.pem ssl_key_file: /etc/ssl/private/ssl-cert-snakeoil.key login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_privileged_group: mail mail_location: mbox:~/mail:INBOX=/var/mail/%u mbox_write_locks: fcntl dotlock auth default: passdb: driver: pam userdb: driver: passwd Thanks very much, -- Knute Johnson

5 11

[Dovecot] questions of how to connect to pop3s
by Scott Berry 12 Nov '10

12 Nov '10

Hello there, I am new to Dovecot and I am using version1.2.12. I have included the dovecot -n output: root@ubuntuSnoopBear:/home/scott# dovecot -n \# 1.2.12: /etc/dovecot/dovecot.conf # OS: Linux 2.6.35-22-generic-pae i686 Ubuntu 10.10 log_timestamp: %Y-%m-%d %H:%M:%S protocols: pop3 pop3s listen: 995 ssl_key_password: nerdie1tech login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/pop3-login login_greeting: pilotalknet.dyndns.org ready. mail_privileged_group: mail mbox_write_locks: fcntl dotlock mail_executable: /usr/lib/dovecot/pop3 mail_plugin_dir: /usr/lib/dovecot/modules/pop3 auth default: passdb: driver: pam userdb: driver: passwd What I need to ensure is that everything is correctly set for a pop3s server. I also need to know how to tell someone how to configure their mail client as the pop3 and smtp server. For example do I say pop.pilotalknet.ldyndns.org and smtp.pilotalknet.dyndns.org? The hostname is: pilotalknet.dyndns.org also is it still possible to check the working of the connection via a telnet connection doing: telnet pilotalknet.dyndns.org:995 or do I have to do something different? what I am achieving with the telnet connection is to ensure the pop server comes up with the greeting from dovecot. Thanks much.

3 2

[Dovecot] (no subject)
by Radio Tron 12 Nov '10

12 Nov '10

http://sites.google.com/site/jfgkewjgkjwgjwgwhq/phtv4a

1 0

[Dovecot] alternate sendmail binary for sieve redirect OT
by Robert Schetterer 12 Nov '10

12 Nov '10

Hi , this isnt really a dovecot/postfix question in dove lda, there is sendmail_path = someone tried other progs here like mini_sendmail ? http://www.acme.com/software/mini_sendmail/ i.e for using a default from forwarder address when sending redirects by sieve....is a stupid idea? background, some other mail providers use a default sender forwarder mailaddress when redirect this may avoid problems at forwarding with spf etc any other idea to reach this goal, pipe etc? -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

1 0

[Dovecot] dove 2.0.7 virtual no mails INBOX pop3
by Robert Schetterer 12 Nov '10

12 Nov '10

Hi Timo, i have no mails from INBOX over pop3 other folders work ok as well as imap like set Virtual POP3 INBOX namespace default { # type = private separator = / prefix = "" list = yes # hidden = no subscriptions = yes } namespace virtual { # type = private prefix = "virtual/" separator = / # location = virtual:/etc/dovecot/virtual:LAYOUT=maildir++ location = virtual:/etc/dovecot/virtual hidden = yes list = no subscriptions= no } namespace real { # type = private prefix = "RealMails/" separator = / list = no hidden = yes } namespace { type = shared separator = / # Mailboxes are visible under "shared/user@domain/" # %%n, %%d and %%u are expanded to the destination user. prefix = "shared/%%u/" #prefix = "shared/%%d/%%u/" # Mail location for other users' mailboxes. Note that %variables and ~/ # expands to the logged in user's data. %%n, %%d, %%u and %%h expand to the # destination user's data. #location = maildir:/usr/local/virtual/%d/%%u/:INDEX=~/shared/%%d/%%u/ location = maildir:/usr/local/virtual/%%d/%%u/:INDEX=~/shared/%%d/%%u/ #Use the default namespace for saving subscriptions. subscriptions = no # List the shared/ namespace only if there are visible shared mailboxes. list = children inbox = no } /etc/dovecot/virtual/INBOX/dovecot-virtual RealMails/* -RealMails/Trash -RealMails/Trash/* -RealMails/Sent -RealMails/Sent/* -RealMails/Templates -RealMails/Templates/* -RealMails/Drafts -RealMails/Drafts/* -RealMails/Archives -RealMails/Archives/* unseen -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

2 2

[Dovecot] correct syntax for multiple ports
by Kilburn Abrahams 12 Nov '10

12 Nov '10

Hi, What is the correct format to specify multple ports in dovecot 2. With dovecot 1.2 listen = *:143 *:6188 worked fine. I cannot find any mention in the wiki2 about the different combinations of listen, address and port parameters and dovecot complains about the combinations I tried. Does not seem to work 1. inet_listener imap { listen = *:143 *:6188 } 2. inet_listener imap { address = *:143 *:6188 } 3. inet_listener imap { port = 143, 6188 or port = 143 6188 } This start dovecot, but roundcube will not connect on port 143, although Thunderbird will connect on 1432 and 6188 listen = *, :: 1. inet_listener imap { port 143 port = 6188 } Regards K

2 4