- dovecot - dovecot.org

[Dovecot] A few questions on shared folders
by Michael Durket 26 May '10

26 May '10

I'm looking at the possibility of using shared folders to solve a particular problem for my employer and I have a few questions: 1) Can shared folders be in mbox format while allowing the user's mail to be in maildir format? (I think the answer is yes, but wanted to check). 2) What version of dovecot should I be running in order to support shared folders? 3) Is there a good overview document that people could recommend I read that describes how best to set up shared folders under dovecot (and perhaps also gives an overview of shared folder usage in IMAP mail clients in general)? Thanks very much, Michael Durket

2 1

Re: [Dovecot] dovecot2 latest beta5 acl not working properly ?
by Robert Schetterer 26 May '10

26 May '10

Am 25.05.2010 22:20, schrieb Timo Sirainen: > On Tue, 2010-05-25 at 21:56 +0200, Robert Schetterer wrote: >>> But I'm still continuing my crusade to get the clients fixed instead. >>> >>> >> >> Hi Timo, dont wanna stop crusaders *g, > > BTW. To help with the crusade, could you report the bug to Imp bug > database? :) > > jep i will do, but it might be a problem for testing developers might have no dovecot2 beta setup any exact tec message for them ? ( like bla bla horde/imp imap acl rfc ....bug with a link ?) in hard case they might will contact you But as far i know a few horde/imp guys are reading this list too so it will find its way anyway to them -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

2 4

[Dovecot] STARTTLS does not seem to work
by Phil Howard 26 May '10

26 May '10

I believe I have the configuration set to use START TLS on IMAP4 (143) and POP3 (110) ports. However, it does not seem to be working. Yet "STARTTLS" is listed as a capability (which tells me I probably do have it configured right). In the session below, 172.30.0.24 is the mail server I'm putting up. 64.26.60.229 is an outside mail service. A similar thing happens on POP3. The always-SSL/TLS ports (993 and 995) are working. There's very little documentation matching "starttls". ======================================================================== altair/phil /home/phil 162> telnet 172.30.0.24 143 Trying 172.30.0.24... Connected to 172.30.0.24. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS UIDPLUS LIST-EXTENDED I18NLEVEL=1 STARTTLS LOGINDISABLED] AUTHORIZED USERS ONLY -- unauthorized access strictly prohibited STARTTLS STARTTLS BAD Error in IMAP command received by server. ^]quit telnet> quit Connection closed. altair/phil /home/phil 163> telnet 64.26.60.229 143 Trying 64.26.60.229... Connected to 64.26.60.229. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE STARTTLS] Courier-IMAP ready. Copyright 1998-2005 Double Precision, Inc. See COPYING for distribution information. STARTTLS STARTTLS OK Begin SSL/TLS negotiation now. ^]quit telnet> quit Connection closed. altair/phil /home/phil 164> ======================================================================== I do have "disable_plaintext_auth = yes" in my config file even though "dovecot -n" does not show it ... must be a default. ======================================================================== # 1.1.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.31-19-server x86_64 Ubuntu 9.10 ext3 base_dir: /var/run/dovecot/ log_path: /var/log/dovecot/error.log info_log_path: /var/log/dovecot/info.log log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap pop3 imaps pop3s listen: 172.30.0.24, [fc00::18], 127.0.0.1, [::1] ssl_cert_file: /etc/ssl/certs/ssl-mail.pem ssl_key_file: /etc/ssl/private/ssl-mail.key ssl_parameters_regenerate: 24 ssl_cipher_list: ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM login_dir: /var/run/dovecot//login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_greeting: AUTHORIZED USERS ONLY -- unauthorized access strictly prohibited login_greeting_capability(default): yes login_greeting_capability(imap): yes login_greeting_capability(pop3): no mail_max_userip_connections(default): 10 mail_max_userip_connections(imap): 10 mail_max_userip_connections(pop3): 3 verbose_proctitle: yes first_valid_uid: 250 mail_privileged_group: mail mail_uid: vmail mail_gid: vmail mail_location: maildir:/home/mail/%Ld/%Ln/mail mail_debug: yes mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_process_size: 768 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 imap_client_workarounds(default): outlook-idle delay-newmail imap_client_workarounds(imap): outlook-idle delay-newmail imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login username_format: %Ln@%Ld verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: username_format=%Ln@%Ld /etc/mailauth/deny deny: yes passdb: driver: passwd-file args: username_format=%Ln /etc/mailauth/%Ld/deny deny: yes passdb: driver: passwd-file args: scheme=crypt username_format=%Ln@%Ld /etc/mailauth/passwd passdb: driver: passwd-file args: scheme=crypt username_format=%Ln /etc/mailauth/%Ld/passwd userdb: driver: passwd-file args: username_format=%Ln@%Ld /etc/mailauth/passwd userdb: driver: passwd-file args: username_format=%Ln /etc/mailauth/%Ld/passwd socket: type: listen client: path: /var/spool/postfix/private/dovecot-auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail group: vmail ========================================================================

5 12

[Dovecot] config file includes
by Tim Traver 26 May '10

26 May '10

Hi all, ok, I couldn't quite find this in any of the documentation, so I figured I would ask here. In preparation to move to version 2.0 to take advantage of the mutiple IP and SSL cert options that are coming, it would be really nice to be able to include other config files in the main config file, so that I don't have to edit the main config in order to add new IP addresses or certs... Does dovecot currently have the ability to include another config file when it is parsing the main config??? If not, is that something that we can put on the wish list? Thanks, Tim.

2 4

[Dovecot] Dovecot public folders subscription
by tux2002 26 May '10

26 May '10

Good day! First sorry my English. I have shared IMAP folders (public namespace). How I can use separate files "subscriptions" for each users? -- View this message in context: http://old.nabble.com/Dovecot-public-folders-subscription-tp28654540p286545… Sent from the Dovecot mailing list archive at Nabble.com.

2 3

[Dovecot] Problem with deliver and quota userdb sql
by Antonio Casado Rodríguez 26 May '10

26 May '10

I have quota with userdb sql override. When i overpass 100M deliver reject the message. I have 200M in sql. Deliver don't query the database. What happen in it? # 1.2.11: /etc/dovecot.conf # OS: Linux 2.6.9-89.0.25.ELsmp i686 Red Hat Enterprise Linux AS release 4 (Nahant Update 8) ext3 log_path: /var/log/dovecot/dovecot.log info_log_path: /var/log/dovecot/dovecot.info protocols: imaps managesieve ssl_cert_file: /etc/httpd/conf/ssl.crt/alboran.ual.es.dovecot_mas_ca.crt ssl_key_file: /etc/httpd/conf/ssl.key/server.key login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(managesieve): /usr/local/libexec/dovecot/managesieve-login verbose_proctitle: yes mail_location: maildir:/var/spool/mail/%n mail_executable(default): /usr/sbin/post-login-dovecot mail_executable(imap): /usr/sbin/post-login-dovecot mail_executable(managesieve): /usr/local/libexec/dovecot/managesieve mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(managesieve): /usr/lib/dovecot/managesieve namespace: type: private separator: / location: maildir:/var/spool/mail/%n inbox: yes list: yes subscriptions: yes lda: postmaster_address: postmaster(a)alboran.ual.es mail_plugins: quota sieve log_path: /var/log/dovecot/dovecot-deliver.log info_log_path: /var/log/dovecot/dovecot-deliver.log auth default: master_user_separator: * passdb: driver: passwd-file args: /etc/passwd.masterusers master: yes passdb: driver: pam userdb: driver: sql args: /etc/dovecot-sql.conf userdb: driver: passwd plugin: quota: maildir quota_rule: *:storage=100M quota_rule2: Trash:storage=15M sieve_dir: ~/sieve

2 3

[Dovecot] dovecot 2.0 and lmtp
by Vasiliy G Tolstov 26 May '10

26 May '10

Dovecot now support lmtp, i'm try to tell exim transport to use lmtp driver = lmtp command = /usr/libexec/dovecot/lmtp batch_max = 20 user = 1000 group = 1000 But get error: May 12 13:00:43 selfip exim[13863]: [13863] 1OC7nF-00036i-Ue == vase(a)selfip.ru R=usr_aliases T=usr_aliases defer (-19): Malformed LMTP response after initial connection: Debug: none: root=, index=, control=, inbox= What does it mean? -- Vasiliy G Tolstov <v.tolstov(a)selfip.ru> Selfip.Ru

4 4

[Dovecot] imap quota and pop quota
by gbotero＠emailforall.no-ip.org 25 May '10

25 May '10

hi everyone i have a question i have dovecot 2.0 and postfix with virtual users with mysql all is working fine but when i read mail from outlook or pop and then read the mail from webmail the quota is not the same i mean they calculate wrong and i have to erase the maildirsize file and force to recalculate, what can i do, thanks

1 0

[Dovecot] dovecot2 latest beta5 acl not working properly ?
by Robert Schetterer 25 May '10

25 May '10

Hi i tested acls with some clients horde/imp mulberry thunderbird squirrelmail kmail and i couldnt get it run proberly i have no problems testing setacl etc with plain telnet session, and i have no error in verbose logging but it looks like acl is only working partly with some clients so show acls is working mostly but setting only partly horde/imp and mulberry dont show any acls any idea? -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

3 8

[Dovecot] Corrupted index cache file and Maildir filename has wrong W value
by Barry Scott 25 May '10

25 May '10

kmail stopped working and when I check the dovecot log file I see: May 4 11:40:38 f12barry dovecot: IMAP(bscott): Corrupted index cache file /home/bscott/Maildir/._NewMail-com/dovecot.index.cache: Corrupted virtual size for uid=234: 633278 != 633251 May 4 11:40:38 f12barry dovecot: IMAP(bscott): Corrupted index cache file /home/bscott/Maildir/._NewMail-com/dovecot.index.cache: Corrupted virtual size for uid=234: 633278 != 633251 May 4 12:34:44 f12barry dovecot: IMAP(bscott): Corrupted index cache file /home/bscott/Maildir/.Mailing Lists.Xorg Devel 2010-04/dovecot.index.cache: Corrupted virtual size for uid=312: 8884 != 8858 May 4 12:34:44 f12barry dovecot: IMAP(bscott): Corrupted index cache file /home/bscott/Maildir/.Mailing Lists.Xorg Devel 2010-04/dovecot.index.cache: Corrupted virtual size for uid=312: 8884 != 8858 ... more of the same... May 4 13:02:54 f12barry dovecot: IMAP(bscott): Corrupted index cache file /home/bscott/Maildir/.Mailing Lists.Xorg Users 2010-04/dovecot.index.cache: Corrupted virtual size for uid=38: 30392 != 30366 May 4 13:02:58 f12barry dovecot: IMAP(bscott): Corrupted index cache file /home/bscott/Maildir/.Mailing Lists.Xorg Users 2010-04/dovecot.index.cache: Corrupted virtual size for uid=43: 8796 != 8770 May 4 15:25:03 f12barry dovecot: IMAP(bscott): FETCH [] for mailbox _NewMail-com UID 48 got too little data: 3230 vs 3278 May 4 15:25:03 f12barry dovecot: IMAP(bscott): Maildir filename has wrong W value: /home/bscott/Maildir/._NewMail-com/cur/1271683097.M615087P3538.f12barry.office.onelan.co.uk,S=3154,W=3278:2,S May 4 15:25:03 f12barry dovecot: IMAP(bscott): Corrupted index cache file /home/bscott/Maildir/._NewMail-com/dovecot.index.cache: Broken virtual size for mail UID 48 May 4 15:25:03 f12barry dovecot: IMAP(bscott): Disconnected: FETCH failed bytes=15437134/33737060 May 4 17:45:41 f12barry dovecot: dovecot: Killed with signal 15 (by pid=7300 uid=0 code=kill) At this point I had only tail'ed the log and seen the issue with UID 48. I then: 1. stopped dovecot 2. deleted the ofending file 3. deleted the dovecot* files 4. started dovecot May 4 17:49:58 f12barry dovecot: Dovecot v1.2.11 starting up (core dumps disabled) May 4 17:52:17 f12barry dovecot: Killed with signal 15 (by pid=7556 uid=0 code=kill) May 4 17:53:21 f12barry dovecot: Dovecot v1.2.11 starting up (core dumps disabled) May 4 17:53:21 f12barry sendmail[2067]: starting daemon (8.14.3): SMTP+queueing@01:00:00 May 4 17:53:21 f12barry sm-msp-queue[2075]: starting daemon (8.14.3): queueing@01:00:00 May 4 17:55:26 f12barry dovecot: imap-login: Login: user=<bscott>, method=PLAIN, rip=::1, lip=::1, secured May 4 17:55:29 f12barry dovecot: IMAP(bscott): FETCH [] for mailbox _NewMail-com UID 48 got too little data: 3878 vs 3920 May 4 17:55:29 f12barry dovecot: IMAP(bscott): Maildir filename has wrong W value: /home/bscott/Maildir/._NewMail-com/cur/1271683097.M733325P3538.f12barry.office.onelan.co.uk,S=3780,W=3920:2,S May 4 17:55:29 f12barry dovecot: IMAP(bscott): Corrupted index cache file /home/bscott/Maildir/._NewMail-com/dovecot.index.cache: Broken virtual size for mail UID 48 May 4 17:55:29 f12barry dovecot: IMAP(bscott): Disconnected: FETCH failed bytes=3955/48628 May 4 18:05:55 f12barry dovecot: imap-login: Login: user=<bscott>, method=PLAIN, rip=::1, lip=::1, secured Now another file is being complained about. What would cause these problems? What is the W value and how could I check it? Here is the details of the dovecot I'm using and the kmail version I'm using.ƀ $ sudo dovecot -n # 1.2.11: /etc/dovecot.conf # OS: Linux 2.6.32.11-99.fc12.x86_64 x86_64 Fedora release 12 (Constantine) login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 auth default: passdb: driver: pam userdb: driver: passwd Client is kmail from kdepim-4.4.2-1.fc12.x86_64 Barry

2 4