- dovecot - dovecot.org

[Dovecot] mdbox compression
by Timo Sirainen 06 Feb '10

06 Feb '10

I was wondering if I should add compression support to mdbox one mail at a time or one file (~2MB) at a time. The tradeoffs are: * one mail at a time allows quickly seeking to wanted mail inside the file, but it can't compress mails as well * one file at a time compresses better, but seeking is slow because it can only be done by uncompressing all the data until the wanted offset is reached I did a quick test for this with 27 MB of my old INBOX mails: (note the -b option, so it doesn't count wasted fs space) mdbox/storage% du -sb . 15120350 . Maildir/cur% du -sb . 16517320 . % echo 1-15120350/16517320|bc -l .08457606924125705623 So, compressed mdboxes take 8.5% less space. This was with regular gzip compression with default level. With bzip2 -9 compression the difference was 10%. Any thoughts on if 8-10% is significant enough improvement to make seeking performance worse? Or perhaps I should just implement both ways.. :)

4 6

[Dovecot] Dovecote does'nt start - no log ?
by Jean-Francois 06 Feb '10

06 Feb '10

Hi All, Actually, I installed Dovecot on an OpenBSD server, however, after properly setting (assumed) the confs, Dovecot does'nt start. I don't know the reason but don't know how to debug. Where is the log about reason for not starting ? Thank you for helping. Regards

4 11

[Dovecot] Forcibly emptying a POP3 mailbox
by Răzvan Sandu 05 Feb '10

05 Feb '10

Hello, I've recently saw a discussion on this list, about a standardised way of emptying POP3 mailboxes on the server - but no solution came up. Please provide a suggestion for the following situation: - I am running a stock POP3 dovecot server, on Fedora 12 (dovecot version 1.2.9) - passwd-file authentication via /etc/imap.passwd - users are virtual, sharing the same UID/GID; - storage is in MailDir system; - for remote users, server is POP3-only, since the administrative policy says that every user should download his messages on the local workstation, then delete them from server immediately after succesful download. - IMAP is allowed only locally, in order to be used together via stock squirrelmail Web interface (for emergencies only) However, there are users that check the infamous „Leave a copy on the server” checkbox (or equivalent) in their mail clients, eventually adding „Delete messages after X days”. Since I have no direct administrative control on the clients, I absolutely need a way to forbid the above behaviour at server level, in order to enforce the policy. The server's HDD is meant to store received messages from reception to the first access only. Filesystem quotas are not an option in this scenario, since the UID/GID is the same for all virtual users. What I need is way to make sure that "cur" and "tmp" subdirectories are perfectly empty after the user downloads his mail. (I will also need a way to make sure that users using squirrelmail leave no populated "Sent" and "Trash" folders on server's HDD, but that's offtopic here). Could you please suggest a way to solve this ? Thanks a lot, Răzvan

5 5

Re: [Dovecot] Forcibly emptying a POP3 mailbox
by Răzvan Sandu 05 Feb '10

05 Feb '10

Hello, Thanks a lot, but the problem here are not the IMAP users accessing the server via squirrelmail. Few people use this. What I mainly want to avoid are *POP3* users checking the „Leave a copy on the server” checkmark. I need a way of automatically performing the DELE command at server level, just after a POP3 user *succesfully* downloaded his messages via POP3... Thanks again, Răzvan

5 4

[Dovecot] postfix and dovecot on different systems - sasl request
by thomas polnik 05 Feb '10

05 Feb '10

Hello, until now I have use postfix and dovecot on the same server. Now I want/must split this both systems (server1 - postfix, server2 - dovecot). I used dovecot auth system for postfix ## snip ## smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth ## snap ## but this does not work, if dovecot is not running on the same server. I did not find any information in postfix/dovecot documentation, how I could solve this problem smart. My only idea, but it looks like quick and dirty solution: On the postfix system a small dovecot systems runs only for postfix sasl via /var/spool/postfix/private/auth. (Or I use saslauthd with sql or imap) The postfix system (on server 1) delivers mails via transport map to the dovecot system. On the dovecot system postfix delivers this mails i.e. via ## snip ## dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -d ${recipient} ## snip ## to the mail boxes. Are there other ways, how I could solve this problem? My wish configuration: postfix sends the auth request via tcp/ip to the dovecot auth system and not via a socket. I use postfix 2.6 and dovecot 1.2.6. Best regards, thomas polnik.

2 1

[Dovecot] dovecot-auth stops responding
by Jonathan Siegle 05 Feb '10

05 Feb '10

Running dovecot 1.2.4(imap only) on AIX out of inetd. I accept passwords(PAM for auth) and kerberos tickets. Occasionally we see dovecot-auth stop responding. I just kill it off and another process is spawned which works fine. It doesn't look like it is hitting any ulimits(11MB for memory). I issued a kill -11 and ran it through the debugger. Here is what it says: dbx dovecot-auth core Type 'help' for help. [using memory image in core] reading symbolic information ... Segmentation fault in __fd_poll at 0x900000000117634 ($t1) 0x900000000117634 (__fd_poll+0x98) e8410028 ld r2,0x28(r1) (dbx) where __fd_poll(??, ??, ??) at 0x900000000117634 ioloop-poll.poll(__listptr = 0x00000001104dd330, __nfds = 145, __timeout = 1051), line 121 in "poll.h" io_loop_handler_run(ioloop = 0x000000011001bfb0), line 157 in "ioloop- poll.c" io_loop_run(ioloop = 0x000000011001bfb0), line 335 in "ioloop.c" main(argc = 1, argv = 0x0ffffffffffffad8), line 347 in "main.c" Here are my ulimits: ulimit -a time(seconds) unlimited file(blocks) 2097151 data(kbytes) 1048576 stack(kbytes) 65536 memory(kbytes) 65536 coredump(blocks) 2097151 nofiles(descriptors) 32768 Any help would be appreciated. Thanks, Jonathan

3 12

[Dovecot] Fatal: chdir( ) failed: Permission denied
by Vallo Kallaste 05 Feb '10

05 Feb '10

Hi Dovecot fails to chdir() into users home directory giving the following error: Oct 9 16:43:49 jura dovecot: dovecot: Fatal: chdir(/a/home/mina) failed: Permission denied (euid=1118 0(mina) egid=11332(devel) missing +x perm: /a/home) Oct 9 16:43:49 jura dovecot: dovecot: child 14441 (imap) returned error 89 (Fatal failure) The reason seems to be that user primary group is "devel" and directory /a/home has ACL which gives execute permission only to the users in "domain users" group. Now the catch is that the user _is_ member of "domain users" group and is happily accessing his home directory over CIFS(Samba) for long time. Also, the user has no problem entering his home directory when using shell access. It just seems like the user lost membership of a bunch of supplementary groups. The group membership info is coming from M$ PDC via winbind and NSS. We have few users and can change the users primary group and/or relax the /a/home directory ACL, but overall this is not right. Shall I shut up or can we hope for a fix or at least explanation? Thanks jura:/a # ls -la drwxrws--T+ 3 root domain admins 18 Oct 8 15:10 home jura:/a # getfacl home/ # file: home # owner: root # group: domain\040admins user::rwx group::rwx group:domain\040users:--x mask::rwx other::--- -- Vallo

4 8

[Dovecot] Question re: storing non mail files via IMAP
by Charles Marcus 05 Feb '10

05 Feb '10

Hey Timo, I have a question regarding how dovecot might behave if a mail client (like, for example, Thunderbird) decided to store some of its config files on the IMAP server itself. Would there be a decent way of doing this with dovecot that wouldn't cause problems for other clients that didn't know about these files? Maybe there's a way to define a special folder that dovecot knows about at the top level of each users mail location that can be used for this kind of thing? All I'm thinking of are certain config related files, so they would be small, and would only be downloaded when they didn't already exist - ie, when someone adds their existing account to a new PC, the first time they logged in, TB could simply download all of the config files, restart itself, and voila, your pre-configured TB is ready to go...

5 6

[Dovecot] mailutil question re: translating mbox folders to maildir
by Stewart Dean 04 Feb '10

04 Feb '10

I need mailutil in order to use the mbox to maildir translation routines that are posted in the Dovecot wiki, but there is no mailutil with the AIX image... mailutil is apparently built as part of Pine, and indeed I can see it in the build tree from my V4.6.1 Pine build, which I still have....OTOH, my version of Pine is not patched for maildir. Will the native pine mailutil work with mb2md or does it have be a mailutil built in a patched Pine :) tree? Oh Tannebaum, oh Tannebaum........ -- ==== Once upon a time, the Internet was a friendly, neighbors-helping-neighbors small town, and no one locked their doors. Now it's like an apartment in Bed-Stuy: you need three heavy duty pick-proof locks, one of those braces that goes from the lock to the floor, and bars on the windows.... ==== Stewart Dean, Unix System Admin, Bard College, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

1 0

[Dovecot] dovecot and AFS
by Per-Erik Persson 04 Feb '10

04 Feb '10

Scrolling thru the archives gives me a hint that there might be troubles with AFS together with dovecot and maildir especially the LDA Is this still an issue or should I prepare for spending time to solve it? If someone successfully got it to work in a small or large scale environment I would be happy to know about it. /Per-Erik Persson

3 6