- dovecot - dovecot.org

[Dovecot] problem with compilation of dovecot-antispam plugin with dovecot 1.2.5
by GanGan 29 Sep '09

29 Sep '09

hello all, y a use dovecot 1.2.5, compiled with : ./configure --prefix=/opt/dovecot125 --enable-header-install --with-mysql --with-ssl=openssl my error is : make install : cc -DHAVE_CONFIG_H -I/opt/dovecot125/include/dovecot/ -I/opt/dovecot125/include/dovecot/src/ -I/opt/dovecot125/include/dovecot/src/lib/ -I/opt/dovecot125/include/dovecot/src/lib-storage/ -I/opt/dovecot125/include/dovecot/src/lib-mail/ -I/opt/dovecot125/include/dovecot/src/lib-imap/ -I/opt/dovecot125/include/dovecot/src/lib-dict/ -I/opt/dovecot125/include/dovecot/src/lib-index/ -I/opt/dovecot125/include/dovecot/src/imap/ -o dovecot-version dovecot-version.c ./dovecot-version > dovecot-version.h cc -c -DCONFIG_DEBUG -DDEBUG_STDERR -DCONFIG_DEBUG_VERBOSE -fPIC -shared -Wall -Wextra -DPLUGINNAME=antispam -DHAVE_CONFIG_H -I/opt/dovecot125/include/dovecot/ -I/opt/dovecot125/include/dovecot/src/ -I/opt/dovecot125/include/dovecot/src/lib/ -I/opt/dovecot125/include/dovecot/src/lib-storage/ -I/opt/dovecot125/include/dovecot/src/lib-mail/ -I/opt/dovecot125/include/dovecot/src/lib-imap/ -I/opt/dovecot125/include/dovecot/src/lib-dict/ -I/opt/dovecot125/include/dovecot/src/lib-index/ -I/opt/dovecot125/include/dovecot/src/imap/ -o debug.o debug.c In file included from debug.c:5: antispam-plugin.h: In function 'string_dict_init': antispam-plugin.h:119: erreur: too few arguments to function 'dict_init' antispam-plugin.h:120: attention : control reaches end of non-void function make: *** [debug.o] Erreur 1 my .config : BACKEND=spool2dir DOVECOT=/opt/dovecot125/include/dovecot INSTALLDIR=/opt/dovecot125/lib/dovecot/imap USER=root GROUP=root DEBUG=stderr DEBUG_VERBOSE=1 PLUGINNAME=antispam any idea ? thanks in advance -- GanGan - www.system-linux.eu - !DSPAM:30,4abce8de71461752217160!

2 1

[Dovecot] dovecot & dspam
by Osvaldo Alvarez Pozo 29 Sep '09

29 Sep '09

Hi since several day ago I'am trying to deliver to dovecot from dspam but I hve several errors in /var/log/dovecot-deliver.log I have " Error: Can't connect to auth server at /var/run/dovecot/auth-master: Permission denied" in /var/log/mail.log I have Delivery agent returned exit code 75: /usr/lib/dovecot/deliver -d toto(a)domai.tld Sep 28 18:28:52 mx1 postfix/lmtp[23238]: 80222DE2ED: to=<toto(a)domain.tld>, relay=127.0.0.1[127.0.0.1]:2424, delay=15601, delays=15601/0.04/0.04/0.1, dsn=4.3.0, status=deferred (host 127.0.0.1[127.0.0.1] said: 421 4.3.0 <toto(a)domain.tld> Auto-Whitelisted (in reply to end of DATA command)) My conf dovecot dovecot.conf ------------------------------------------------- base_dir = /var/run/dovecot/ disable_plaintext_auth = no protocols = imap pop3 imaps pop3s log_timestamp = "%Y-%m-%d %H:%M:%S " syslog_facility = mail mail_location = maildir:/var/vmail/%d/%u/Maildir mail_privileged_group = mail mail_debug = yes maildir_copy_with_hardlinks = yes first_valid_uid = 109 last_valid_uid = 150 first_valid_gid = 8 last_valid_gid = 8 ssl_cert_file = /etc/ssl/oc3n.net/mailserver/mail-cert.pem ssl_key_file = /etc/ssl/oc3n.net/mailserver/mail-key.pem protocol imap { # Login executable location. login_executable = /usr/lib/dovecot/imap-login mail_executable = /usr/lib/dovecot/imap imap_max_line_length = 65536 } protocol pop3 { login_executable = /usr/lib/dovecot/pop3-login mail_executable = /usr/lib/dovecot/pop3 pop3_uidl_format = %08Xu%08Xv mail_plugin_dir = /usr/lib/dovecot/modules/pop3 } protocol lda { postmaster_address = postmaster(a)mydomain.com log_path = /var/log/dovecot-deliver.log info_log_path = /var/log/dovecot-deliver.log } auth_verbose = yes auth_debug = yes auth_debug_passwords = yes auth default { mechanisms = plain login passdb sql { # Path for SQL configuration file args = /etc/dovecot/dovecot-sql.conf } userdb sql { # Path for SQL configuration file args = /etc/dovecot/dovecot-sql.conf } user = nobody socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = vmail group = mail } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = mail } } } dict { } plugin { trash = /etc/dovecot-trash.conf } file /etc/dovecot/dovecot-sql.conf -------------------------------------------------------- driver = mysql connect = host=localhost dbname=postfixadmin user=postfixadmin password="secret" default_pass_scheme = MD5 user_query = SELECT '/var/vmail/%d/%n' AS home, 'maildir:/var/vmail/%d/%n' AS mail, 150 AS uid, 8 AS gid, CONCAT('dirsize:storage=', quota) AS quota FR OM mailbox WHERE username = '%u' AND active = '1' password_query = SELECT username AS user, password, '/var/vmail/%d/%n' AS userdb_home, 'maildir:/var/vmail/%d/%n' AS userdb_mail, 150 AS userdb_uid, 8 AS userdb_gid FROM mailbox WHERE username = '%u' AND active = '1' My conf dspam /etc/dspam/dspam.conf ----------------------------------------------------------------- Home /var/spool/dspam StorageDriver /usr/lib/dspam/libmysql_drv.so TrustedDeliveryAgent "/usr/lib/dovecot/deliver -d %u" UntrustedDeliveryAgent "/usr/lib/dovecot/deliver -d %u" QuarantineAgent "/usr/lib/dovecot/deliver -d %u -m SPAM" OnFail error Trust vmail Trust root Trust dspam Trust mail Trust mailnull Trust smmsp Trust daemon Debug * TrainingMode teft TestConditionalTraining on Tokenizer chained Feature whitelist Algorithm graham burton PValue graham Preference "spamAction=tag" Preference "signatureLocation=message" # 'message' or 'headers' Preference "showFactors=on" Preference "spamSubject=[SPAM]" AllowOverride trainingMode AllowOverride spamAction spamSubject AllowOverride statisticalSedation AllowOverride enableBNR AllowOverride enableWhitelist AllowOverride signatureLocation AllowOverride showFactors AllowOverride optIn optOut AllowOverride whitelistThreshold HashRecMax 98317 HashAutoExtend on HashMaxExtents 0 HashExtentSize 49157 HashMaxSeek 100 HashConnectionCache 10 Notifications off PurgeSignatures 14 # Stale signatures PurgeNeutral 90 # Tokens with neutralish probabilities PurgeUnused 90 # Unused tokens PurgeHapaxes 30 # Tokens with less than 5 hits (hapaxes) PurgeHits1S 15 # Tokens with only 1 spam hit PurgeHits1I 15 # Tokens with only 1 innocent hit LocalMX 127.0.0.1 SystemLog on UserLog on opt out ParseToHeaders on ChangeModeOnParse on ChangeUserOnParse full ServerPort 2424 ServerPID /var/run/dspam/dspam.pid ServerMode standard ServerParameters "--deliver=innocent" ServerIdent "localhost.localdomain" ProcessorBias on Include /etc/dspam/dspam.d/ Any Idea??? Thanks

2 1

[Dovecot] sieve vacation error
by Andre Rodier 28 Sep '09

28 Sep '09

Hello everybody, First, I want to thank the development team for the quality and the stability of dovecot. It's now running without problem since two years on my debian box. Next, I'd like you help me to solve the problem I have with vacation/sieve script. My configuration is debian lenny, with standard dovecot packages (1.0). I have setup the sieve plugin, using roundcube on another machine, and filter is working fine. fileinto is working, as well as forward and discard. However, vacation is not working at all, and I have no error message. The mails sent to the account marked as vacation are received, but the auto answer process is not working. Here the successful logs from the vacation reject script, that I temporary use: Sep 23 17:32:41 mail deliver(some.user): Loading modules from directory: /usr/lib/dovecot/modules/lda Sep 23 17:32:41 mail deliver(some.user): Module loaded: /usr/lib/dovecot/modules/lda/lib90_cmusieve_plugin.so Sep 23 17:32:41 mail deliver(some.user): maildir: data=/home//some.user/Maildir Sep 23 17:32:41 mail deliver(some.user): maildir: root=/home//some.user/Maildir, index=/home//some.user/Maildir, control=, inbox= Sep 23 17:32:41 mail deliver(some.user): cmusieve: Using sieve path: /home//some.user/sieve/dovecot.sieve Sep 23 17:32:41 mail deliver(some.user): cmusieve: Executing script /home//some.user/sieve/dovecot.sievec Sep 23 17:32:41 mail deliver(some.user): msgid=<72817c95458dbded987b82ec644f7dce(a)red2.co.uk>: rejectedReturn-Path: <andre.rodier(a)red2.co.uk> Here the headers of an email received, and supposed to be auto answered. X-Original-To: some.user(a)red2.co.uk Delivered-To: some.user@localhost Received: from webmail.red2.co.uk (webmail.red2.co.uk [84.45.46.48]) by mail.red2.co.uk (Postfix) with ESMTP id 0D1607E418D for <some.user(a)red2.co.uk>; Wed, 23 Sep 2009 17:30:44 +0100 (BST) Received: by webmail.red2.co.uk (Postfix, from userid 33) id 227E67FE5; Wed, 23 Sep 2009 17:16:30 +0100 (BST) To: Some User <some.user(a)red2.co.uk> Subject: vacation test MIME-Version: 1.0 Date: Wed, 23 Sep 2009 17:16:30 +0100 From: Andre Rodier <andre.rodier(a)red2.co.uk> Organization: Red2 Message-ID: <854f02eceb84d80d272212de405a1a0e(a)red2.co.uk> X-Sender: andre.rodier(a)red2.co.uk User-Agent: RoundCube Webmail/0.2 Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset=UTF-8 X-DSPAM-Result: Whitelisted X-DSPAM-Processed: Wed Sep 23 17:30:44 2009 X-DSPAM-Confidence: 0.9989 X-DSPAM-Probability: 0.0000 X-DSPAM-Signature: 4aba4d34317622670999051 Here my questions : * If the sieve vacation script had to use a counter for limits per day, where this counter is supposed to be stored ? I cant see any dovecot file. I have temporary try to use 0777 for home/sieve/maildir folders, but no file is created at all. * Is it the same process used to forward, discard and finally vacation ? * I use virtual file for users on postfix, and I also have a LDAP server for authentication. Do I have something to configure on dovecot to be sure that vacation is working with this configuration ? * As you may have noticed above, mails are redirected to localhost users. ( c.f X-Original-To: some.user(a)red2.co.uk and Delivered-To: some.user@localhost ) Is this can affect the process ? ( Remember that forward and reject is working ). * Is there a way to debug the vacation process ? Thanks for your help. André Rodier.

5 4

[Dovecot] Proxying Performance vs imapproxy
by Dan Poltawski 28 Sep '09

28 Sep '09

Hi, I'm planning on a new mail infrastructure which constists of multiple 'frontends' running webmail & public access pop/imap, which would communicate over imap/pop to 'backend mail stores'. My original idea was to run dovecot on the backends, use a predition on the frontends to proxy imap/pop and also run imapproxy in front of webmail [squirrelmail]. I've since read about the dovecot proxying features and it seems to make sense to replace predition in that above scenario. I'm unclear about the benefits of the auth_cache and how it compares to the using imapproxy in front of webmail client? Does it make sense to have authcaching switched on in the proxy and not on the backend server? (Doesn't the authentication just have to happen on the backend server?) Are there any performance benefits to using a proxying server, or is it just for splitting mailstores? thanks for your work, Dan Poltawski

4 6

[Dovecot] Upgrading Dovecot on CentOS 4 from 0.99 to 1.x
by Josep L. Guallar-Esteve 28 Sep '09

28 Sep '09

(sorry for my previous message, I sent it by mistake before finishing it) Hello, We have a production mail server running dovecot 0.99 (dovecot-0.99.14-1.rf). We are getting several errors corrected in dovecot 1.x versions: * corrupted inboxes (garbage at beggining of mbox files), * corrupted index files (Error: Corrupted file index /home/jsmith/.imap/Drafts/.imap.index: Sequence 6 not found from binary tree (6 msgs says header)), * others (Error: fcntl() failed with mbox file /var/mail/jsmith: Resource deadlock avoided), etc. I'm planning to upgrade using the instructions found at dovecot's wiki. On http://atrpms.net/dist/el4/ it is offered in 3 different versions: * dovecot 1..0.15-1_73.el4 * dovecot 1.1.19-1_96.el4 * dovecot 1.2.5-0_100.el4 I have a separated test system, where I'll test upgrading from 0.99 to final selected version, to discover any possible gotchas found while upgrading. Two questions: 1. Which version is the recommended to upgrade? I'd like stability and as little problems as possible over anything else, as we have a simple set up. 2. What is the preferred upgrade method? straight upgrade? (099 -> rpm -Fvh dovecot-1.2 ? Or upgrading one release at a time? (0.99 > 1.0 > 1.1 ...) Thank you in advance for any recommendation. Regards, Josep -- Josep L. Guallar-Esteve This transmission is intended for the use of the entity or individual to which or whom it is addressed. The transmission or any documents accompanying the transmission may contain confidential information. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution, or action taken in reliance on the contents of the transmission or the documents is strictly prohibited. If you have received this confidential transmission in error, please destroy it and any accompanying documents and notify the sender immediately. Thank you.

3 5

[Dovecot] require SSL certs only for encrypted connections?
by Florin Andrei 28 Sep '09

28 Sep '09

# 1.1.11: /etc/dovecot/dovecot.conf # OS: Linux 2.6.28-14-server x86_64 Ubuntu 9.04 Here's the situation: I have several local clients (Thunderbird) which do not use TLS at all. It's plaintext completely, on port 143, because the connection is local and there are no unauthorized users on this network (it's a home network). I want to keep it that way to keep things simple. Tools / Account Settings / Server Settings: Use Secure Connection: Never Use Secure Authentication: unchecked Until now, this has worked very well. No problems so far. But now I am also setting up IMAPS for remote iPhone clients, with client/server certificates. This is how I generated the certs: http://impetus.us/~rjmooney/projects/misc/clientcertauth.html On the iPhone I uploaded the client.crt file (couldn't import client.p12 for some reason). For Dovecot I am using ca.crt, server.crt and server.key. ssl_listen: *:993 ssl_disable: no ssl_ca_file: /blah/ca.crt ssl_cert_file: /blah/server.crt ssl_key_file: /blah/server.key ssl_key_password: ssl_parameters_regenerate: 168 ssl_cipher_list: ALL:!LOW:!SSLv2 ssl_cert_username_field: commonName ssl_verify_client_cert: yes disable_plaintext_auth: no auth default: mechanisms: plain login ssl_require_client_cert: no ssl_username_from_cert: no I analyzed the connection on 993 with Wireshark and apparently all is good: it's encrypted, I see the certificate exchanges taking place. But I am worried about authenticating the connections from the iPhone and I would like to configure "ssl_require_client_cert: yes" so that a valid certificate is always required. But if I do that then Thunderbird fails to login because it's required a certificate. This is puzzling. I thought that setting would only influence SSL connections. But apparently it also affects plaintext logins from Thunderbird. Is there a way to require a cert from the iPhone TLS connections on port 993, but do not require it from clients connecting to port 143? -- Florin Andrei http://florin.myip.org/

2 6

[Dovecot] Segfault in quota-fs plugin
by Brandon Davidson 28 Sep '09

28 Sep '09

Hi all, We recently attempted to update our Dovecot installation to version 1.2.5. After doing so, we noticed a constant stream of crash messages in our log file: Sep 22 15:58:41 hostname dovecot: imap-login: Login: user=<USERNAME>, method=PLAIN, rip=X.X.X.X, lip=X.X.X.X, TLS Sep 22 15:58:41 hostname dovecot: dovecot: child 6339 (imap) killed with signal 11 (core dumps disabled) We rolled back to version 1.2.4, and installed 1.2.5 on a test system - something we'll have to make sure to do *before* rolling new versions into production. Anyway, after examining a few core files from the test system, it looks like the recent changes to the quota plugin (specifically the maildir backend's late initialization fix) have broken the other backends. Stack trace and further debugging are available here: http://uoregon.edu/~brandond/dovecot-1.2.5/bt.txt The relevant code seems to have been added in changeset 9380: http://hg.dovecot.org/dovecot-1.2/rev/fe063e0d7109 Specifically, quota.c line 447 does not check to see if the backend implements init_limits before calling it, resulting in a null function call for all backends that do not do so. Since this crash would appear to affect all quota backends other than maildir, it should be a pretty easy to reproduce. I've attached a patch which seems to fix the obvious code issue. I can't guarantee it's the correct fix since this is my first poke at the Dovecot source, but it seems to have stopped the crashing on our test host. Regards, -Brandon

3 2

[Dovecot] Running dovecot master processes across multiple IPs
by Steven F Siirila 28 Sep '09

28 Sep '09

We are running dovecot 1.1.8 and are currently running it with 4 master processes (one for each of the protocols: imap, imaps, pop3, pop3s). The idea was to spread out the load so as to not overwhelm any one master. This has worked well. To take it further, we're contemplating running masters across multiple IP addresses, where the host/service name DNS records would be something like this: imap-server.domain A 10.1.1.1 A 10.1.1.2 A 10.1.1.3 A 10.1.1.4 The default route would either be through the first address (10.1.1.1 in this example) or potentially across all of them in presumably a round-robin fashion. Do you see any problems with this? Has anyone done this? -- Steven F. Siirila Office: WBOB, 624J Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota

2 1

[Dovecot] Ubuntu 9.x segmentation fault with vpopmail auth
by Timothy Timmons 28 Sep '09

28 Sep '09

I've been trying for 24 hours now, to get an IMAP server which will autenticate off of vpopmail cdb database and the auth module always segfaults on login. I'm using vpopmail 5.5.0 only because it is the only version which seems to create a dynamically linked version of the library. I tried latest releases dovecot 1.0, 1.1, and 1.2. Also latest mercurial pulls of 1.1 and 1.2. Even old versions of courier-imap and courier-authlib do it, but with these I can try older versions of vpopmail cause they don't require the dynamically linked version of libvpopmail. So I'm thinking it is something with Ubuntu 9.04 and pretty much all third party vpopmail authentication code. Strangely qmail-pop3d works fine with vchkpwd, just I cannot find any IMAP server that will work no matter what combination of vpopmail and version of the IMAP server. If anyone can figure this out I'd greatly appreciate it. Sep 25 14:43:37 mail kernel: [41432.282133] dovecot-auth[14048]: segfault at 0 ip 00000000 sp bf88c8ec error 14 in dovecot-auth[8048000+40000] Sep 25 15:07:16 mail kernel: [42852.136667] dovecot-auth[21185]: segfault at 0 ip 00000000 sp bfdcce2c error 14 in dovecot-auth[8048000+40000] Sep 25 15:23:59 mail kernel: [43855.048512] dovecot-auth[6927]: segfault at 0 ip 00000000 sp bfd81ecc error 14 in dovecot-auth[8048000+40000] Sep 25 15:55:22 mail kernel: [45737.522566] dovecot-auth[12458]: segfault at 0 ip 00000000 sp bfcc8dfc error 14 in dovecot-auth[8048000+40000] Sep 25 16:14:15 mail kernel: [46870.968589] dovecot-auth[30127]: segfault at 0 ip 00000000 sp bff59f9c error 14 in dovecot-auth[8048000+3d000] Sep 25 16:23:26 mail kernel: [47421.947792] dovecot-auth[15832]: segfault at 0 ip 00000000 sp bf9121ec error 14 in dovecot-auth[8048000+31000] Sep 25 16:27:06 mail kernel: [47641.662788] authvchkpw[17265]: segfault at 0 ip 00000000 sp bf8f240c error 14 in authvchkpw[8048000+5000] etc.. Thanks, Tim P.S. I'm going nuts here, trying to get Squirrelmail back up for customers, but I'm absolutely stuck.

3 3

[Dovecot] Sieve: problems installing in different prefix
by Andreas Ntaflos 28 Sep '09

28 Sep '09

Hi list, but mainly Stephan :) when building and subsequently installing the new Sieve plugin I am coming across a small difficulty when it comes to "make install". The libraries lib90_sieve_plugin.* always get installed in the directory /usr/local/lib/dovecot/lda, no matter what "prefix" argument is supplied to "make install". Only the libraries seem affected, not the rest of the Sieve plugin distribution (i.e. sieve, sievec, sieve-test, ...). Background: I like using XStow [1] to manage packages built from source. With XStow one can configure and build software like Dovecot and Sieve as usual (./configure && make) but then install it under a custom directory/prefix, like /usr/local/stow/dovecot-1.2.5. The "prefix" argument for "make install" is used for this, i.e.: make install prefix=/usr/local/stow/dovecot-1.2.5 XStow is then used to create symlinks to the correct places in the file system. For example the Dovecot binary gets installed in /usr/local/stow/dovecot-1.2.5/sbin/dovecot and a symbolic link is created by XStow: /usr/local/sbin/dovecot -> ../stow/dovecot-1.2.5/sbin/dovecot The advantages are clear: installing a software package is a matter of configuring, building and then installing under a custom directory, and letting XStow create symlinks. Updating is as easy as installing the new version in a parallel custom directory and letting XStow update the symlinks. Removing a software package just involves letting XStow remove the symlinks and doing an rm -rf on the custom directory. No more accidentally orphaned files or the need to keep the compiled source distribution around to be able to issue a "make uninstall". Back to the problem: The Sieve source distribution seems to have some hard-coded setting to always install the libraries under /usr/local/lib/dovecot/lda and not honouring the "prefix" argument for "make install". This is probably a libtool issue, but I am not sure. I know my way around the Autotools but here I am a bit lost. Looking at the generated Makefile in dovecot-1.2-sieve-0.1.12/src I can see the following: moduledir = /usr/local/lib/dovecot/ It *should* look like this: exec_prefix = ${prefix} ... moduledir = ${exec_prefix}/lib/dovecot/ This explains why the install prefix is not honoured here. The "moduledir" has already been hardcoded, instead of prefixed. For comparison look at the Dovecot source distribution. Here all libraries are installed correctly under the specified prefix. An example is src/lib-sql. The generated Makefile includes these lines, which are correctly honouring the prefix: exec_prefix = ${prefix} ... moduledir = ${exec_prefix}/lib/dovecot ... #sql_moduledir = $(moduledir)/sql AM_CPPFLAGS = \ -I$(top_srcdir)/src/lib \ -DMODULEDIR=\""$(moduledir)"\" \ $(SQL_CFLAGS) The last few lines seems to make sure that gcc uses the defined moduledir, but as usual generated code is not immediately comprehensible for the casual viewer :) The top-level generated Makefile also contains a correctly defined moduledir: moduledir = ${exec_prefix}/lib/dovecot So, which knobs have to be turned to have the Sieve source distribution use a correct "moduledir" and not a hardcoded path? I hope I could explain the problem correctly and haven't drawn any wrong conclusions here. I will continue to investigate this and maybe even provide a patch if I find a solution but it is probably easier for the maintainer and author of the build system to look at this and determine what to do. Anyway, apologies for this lengthy post. I hope it wasn't too long to read. Andreas [1] http://xstow.sourceforge.net/ -- Andreas Ntaflos GPG Fingerprint: 6234 2E8E 5C81 C6CB E5EC 7E65 397C E2A8 090C A9B4

2 1