- dovecot - dovecot.org

[Dovecot] imap and pop3 benchmark
by Thomas G. Lau 04 Sep '09

04 Sep '09

Dear All, does anyone got any program which could benchmark imap and pop3 in terms of message per second?

2 1

[Dovecot] quota-dirsize and mailbox rules
by Thanos Chatziathanassiou 04 Sep '09

04 Sep '09

I noticed that the dirsize backend for quota didn't support any rules and figured it should be easy enough to add ``ignore'' at least. Using mbox storage and only tested with that, but it seems to work as expected for the time being. I'm attaching a relatively small patch for quota-dirsize.c against dovecot-1.1.18 just in case anyone's interested. Best Regards, Thanos Chatziathanassiou

2 2

[Dovecot] IMAP timeout problem
by Vasantha Narayan 04 Sep '09

04 Sep '09

Hello, We are running dovecot 1.1.2 on a Solaris 10 box. We have been running the same configuration for about a year without a problem. We have a different cert for POP and IMAP. Recently we made two changes. The cert for IMAP expired and we had to install a new one. We applied some patches to the SAN disks that hosts the mail partition. These changes were made over a weekend and the system was rebooted. There were no errors in the logs and everything worked fine until the following Monday morning when IMAP connections increased. When IMAP ports started getting hammered in the morning, IMAP clients started getting "IMAP time out" errors. When this error occurs, IMAP freezes and IMAP clients such as, Thunderbird and Squirrelmail are not able to connect to the IMAP server (both IMAP and IMAPS). We cannot get a telnet connection to the IMAP port or a openssl connection to the IMAPS port. Kill -HUP of the dovecot server solves the problem. But again, when the usage increases, the problem surfaces again. There is no problem with POP or POPS. It continues to function normally while IMAP times out and freezes two or three times a day. Any clue where the problem might be? The debug log does not have any useful pointers. Thanks. Vasantha

3 2

[Dovecot] External auth database process
by Aaron Roberts 04 Sep '09

04 Sep '09

Hi, Is it possible to call a completely external process to authenticate users in dovecot? I am trying to setup a transparent pop3 proxy that will lookup users from a couple of different pop3 servers, authenticate to 1 of them, take a copy of the password and a timestamp and client IP upon success, then proxy to the appropriate end server. I was hoping I would be able to do something along the lines of: dovecot.conf: passdb external args = /usr/scripts/dovecot_auth.pl %u %w The perl script would then carry out the various tasks and return the host and destuser for proxying. Thanks in advance, Aaron

2 1

[Dovecot] libvpopmail.so
by Noris Luigi 03 Sep '09

03 Sep '09

hello, I have qmail with vpopmail configured with 2 domains configured. the pop3 service is granted with vpopmail and the authentication function. I need imap for access to mailboxes in maildir format and courier do not support anymore vpopmail. i have find dovecot from a link on the inter7 site. I have downloaded, compiled and configured. when i start dovecot i recevei always this error in maillog file: Aug 21 16:54:48 mailx2 dovecot: Dovecot v1.2.4 starting up (core dumps disabled) Aug 21 16:54:48 mailx2 dovecot: auth(default): dovecot-auth: error while loading shared libraries: libvpopmail.so: cannot open shared object file: No such file or directory Aug 21 16:54:48 mailx2 dovecot: dovecot: child 22664 (auth) returned error 127 Aug 21 16:54:48 mailx2 dovecot: dovecot: Fatal: Auth process died too early - shutting down I do not undestand if there is a place where can i put libvpopmail.so manually, or specify the position of this file becaust the file exist and is normally in /home/vpopmail/lib/ and accessible in read from all. under there is my configuration. thx in adv GG my configuration: root@mailx2:/usr/local/src/qmail/dovecot-1.2.4# dovecot -n # 1.2.4: /usr/local/etc/dovecot.conf # OS: Linux 2.6.27.7-smp i686 Slackware 12.2.0 base_dir: /var/run/dovecot/ protocols: imap ssl: no disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/local/libexec/dovecot/imap-login first_valid_uid: 89 last_valid_uid: 89 first_valid_gid: 89 last_valid_gid: 89 mail_uid: 89 mail_gid: 89 mail_location: maildir:~/Maildir lda: postmaster_address: postmaster(a)example.com auth default: debug: yes passdb: driver: vpopmail userdb: driver: vpopmail

2 2

[Dovecot] lmtp server
by fernando＠dfcom.com.br 03 Sep '09

03 Sep '09

I believe that dovecot lmtp server will be released with 2.0 version. I working at a project that requires an lmtp server to have scalability. How about the stability of the actual version (alpha, beta ?). Is it mature to be used at production environment ? Another question, my 'ideal' setup would be to receive a message by lmtp and delivers it to an external command (like maildrop). Would it be possible. ? Best Regards, Fernando

2 2

[Dovecot] maildrop index update
by fernando＠dfcom.com.br 03 Sep '09

03 Sep '09

Hi, I´m using a multi-storage architecture in my email environment and maildrop as deliver command at mta. But to this deliver the mx servers mount nfs partitions - we need to use maildrop because many patches we inserted. How can I insert a piece of code at maildrop allowing it to update the dovecot indexes (which lib and/or function from dovecot I need to use ?) Best Regards, Fernando

2 5

[Dovecot] Question about sieve script execution
by Mel Flynn 03 Sep '09

03 Sep '09

Hi, after reading the wiki about sieve_before/sieve_after and sieve_global_path, it's still unclear to me if: sieve_before scripts are executed if no user script exists, but a global script is defined. The reason I ask, is because I'd like to use the same script, so that I don't have to maintain two scripts to apply "company policy" or "global features". It seems implicit from this sentence, but I've been taught not to assume implicitness by various pieces of software ;) "This is not possible using the sieve_global_path setting, because that is only used when the user's private script does not exist." -- Mel

2 2

[Dovecot] Sieve segfault on sieve-before scripts
by Max Ivanov 03 Sep '09

03 Sep '09

I use dovecot 1.2.4 release with sieve 0.1.12 If I setup sieve-before script and latest script contains "keep" at the very end and no personal scripts found then segfault take place. here is part of exim log: 2009-09-01 18:43:06 1MiUZA-0005V9-IB ** ivanov_maxim(a)domain.my <admin(a)domain.my> R=localuser T=local_delivery: Child process of local_delivery transport (running command "/usr/libexec/dovecot/deliver -d $local_part") was terminated by signal 11 (Segmentation fault) Once I remove "keep" from end of latest sieve-before script, everything goes fine. Here is latest global sieve script: # cat /etc/dovecot1.2/sieve-before.d/020-SENT-STORE.sieve require ["imap4flags"]; if header :contains "X-Set-Seen" ["Yes", "YES", "1"] { setflag "\\Seen"; } #keep;

2 2

[Dovecot] POP3 and AVG
by Rick Romero 02 Sep '09

02 Sep '09

Is anyone running v 1.2.3 and have clients with AVG email scanning? I upgraded a server a few weeks ago (which ran Dovecot and the Maildir mail store), and all of a sudden clients with AVG were unable to use POP. Essentially, AVG freezes. The server upgrade was from FreeBSD 7 to OpenSolaris 2009.06, and I did upgrade the Dovecot version from 1.1.17 to 1.2.3, but kept the same config. When I point those users to a port running qmail-popup on another machine (NFS mounting the new server), they work fine. I'm sure I reverted to 1.1.17 during the initial hectic days, with no change. Of course, I'm also sure I had a few of the users test the alternate qmail-popup server, maybe they did it wrong. :( Any thoughts? Should I attach compile configs? #/usr/local/sbin/dovecot -n # 1.2.3: /usr/local/etc/dovecot.conf # OS: SunOS 5.11 i86pc base_dir: /opt/csw/dovecot/ protocols: imap imaps pop3s pop3 ssl_cert_file: /etc/ssl/mail.rapid.pem ssl_key_file: /etc/ssl/mail.rapid.key ssl_key_password: password disable_plaintext_auth: no shutdown_clients: no login_dir: /opt/csw/dovecot//login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_greeting: VFEmail.net ready. login_process_per_connection: no login_process_size: 256 login_processes_count: 6 login_max_processes_count: 512 login_max_connections: 384 mail_max_userip_connections: 25 verbose_proctitle: yes first_valid_uid: 89 last_valid_uid: 89 first_valid_gid: 89 last_valid_gid: 89 mail_privileged_group: mail fsync_disable: yes mail_executable(default): /usr/local/libexec/dovecot/rawlog /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/rawlog /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/rawlog /usr/local/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh namespace: type: private separator: . prefix: INBOX. inbox: yes list: yes subscriptions: yes lda: postmaster_address: postmaster(a)vfemail.net mail_plugin_dir: /usr/local/lib/dovecot/lda sendmail_path: /var/qmail/bin/sendmail auth_socket_path: /opt/csw/dovecot/auth-master auth default: mechanisms: plain login digest-md5 cram-md5 user: vpopmail username_translation: %@ passdb: driver: vpopmail userdb: driver: passwd userdb: driver: vpopmail socket: type: listen master: path: /opt/csw/dovecot/auth-master mode: 384 user: vpopmail plugin: quota: maildir

3 7