- dovecot - dovecot.org

[Dovecot] Spaces in user or group-names
by Sven Strickroth 03 Aug '09

03 Aug '09

Hi, how it is possible to use group names with spaces (like "Domain Admins") in dovecot-acl files? -- Best regards, Sven mailto:sven@clamav.net ClamAV, a GPL anti-virus toolkit http://www.clamav.net

2 4

[Dovecot] Panic: file mbox-sync-rewrite.c: line 590
by Kostik 03 Aug '09

03 Aug '09

Hello! We start migrate to dovecot (v1.2.2). # 1.2.2: /usr/local/etc/dovecot.conf # OS: Linux 2.6.30 i686 Slackware 11.0.0 We have FS user quota and NFS mailboxs(mbox only). While user not overquota, all works fine. But if is, we get error at log: --- Aug 3 16:45:17 chest004 dovecot: pop3-login: Login: user=<boggart(a)xxxx.xx>, method=PLAIN Aug 3 16:45:17 chest004 dovecot: POP3(boggart(a)xxxx.xx): close(/var/virtual/mail/boggart.lock) failed: Disk quota exceeded Aug 3 16:46:28 chest004 dovecot: POP3(boggart(a)xxxx.xx): close(/var/virtual/mail/boggart.lock) failed: Disk quota exceeded Aug 3 16:46:28 chest004 dovecot: POP3(boggart(a)xxxx.xx): Panic: file mbox-sync-rewrite.c: line 590 (mbox_sync_rewrite): assertion failed: (mails[idx].from_offset == start_offset) Aug 3 16:46:28 chest004 dovecot: POP3(boggart(a)xxxx.xx): Raw backtrace: pop3 [0x80c949c] -> pop3 [0x80c9c3e] -> pop3 [0x80c9638] -> pop3(mbox_sync_rewrite+0x6ff) [0x807c9af] -> pop3 [0x8078038] -> pop3 [0x807a30a] -> pop3(mbox_sync+0x399) [0x807b279] -> pop3(mbox_storage_sync_init+0x53) [0x807b773] -> pop3(mailbox_sync+0x2d) [0x809331d] -> pop3(client_command_execute+0x2e6) [0x805d066] -> pop3(client_handle_input+0x75) [0x805be35] -> pop3(io_loop_handler_run+0x101) [0x80d2221] -> pop3(io_loop_run+0x29) [0x80d15a9] -> pop3(main+0x779) [0x805dd49] -> /lib/tls/libc.so.6(__libc_start_main+0xd4) [0xb7e46e14] -> pop3 [0x805b161] --- What does that mean? /usr/local/sbin/dovecot -n --- # 1.2.2: /usr/local/etc/dovecot.conf # OS: Linux 2.6.30 i686 Slackware 11.0.0 base_dir: /var/run/dovecot/ protocols: imap pop3 listen(default): *:143 listen(imap): *:143 listen(pop3): *:110 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login mmap_disable: yes mail_nfs_storage: yes mail_nfs_index: yes mbox_write_locks: dotlock_try fcntl mbox_lock_timeout: 150 mbox_dotlock_change_timeout: 60 mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_log mail_plugins(imap): quota imap_quota mail_log mail_plugins(pop3): mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 pop3_no_flag_updates(default): no pop3_no_flag_updates(imap): no pop3_no_flag_updates(pop3): yes pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login passdb: driver: sql userdb: driver: prefetch plugin: quota: fs:Quota:user =koc

1 0

[Dovecot] Subfolders not listed in Dovecot-1.2.2 with listescape
by Petter Urkedal 03 Aug '09

03 Aug '09

After upgrading to Dovecot-1.2.2 from 1.1* subfolders disappeared, though it was possible to access them directly, e.g. with "mutt -f =lists/dovecot". The problem only occurs if the listescape plugin is enabled. Some relevant bits from the configuration: namespace private { # The only namespace. separator = / prefix = inbox = yes } protocol imap { mail_plugins = fts fts_squat listescape }

2 2

[Dovecot] Best way to get login protocol (pop3/imap) in post-login script
by Zhang Huangbin 03 Aug '09

03 Aug '09

Hi, all. I found doc here: http://wiki.dovecot.org/PostLoginScripting and use ${USER}, ${IP} to track last-login username and remote ip address, but how can i track the mail protocol it used? like pop3, pop3s, imap, imaps? Currently, i wrote shell script as post-login script, and use below command to get protocol: ---- $(basename ${MAIL_PLUGIN_DIR}) ---- But is it the best way to get it? Thanks very much. :) -- Best Regards. Zhang Huangbin - Open Source Mail Server Solution for Red Hat(R) Enterprise Linux, CentOS, Debian, Ubuntu: + http://code.google.com/p/iredmail/ + http://www.iredmail.org/forum/

2 2

Re: [Dovecot] expire plugin no delete 1.2.1 / 1.2.2
by Robert Schetterer 03 Aug '09

03 Aug '09

Robert Schetterer schrieb: > Timo Sirainen schrieb: >> On Fri, 2009-07-31 at 17:21 +0200, Robert Schetterer wrote: >>> Hi Timo, >>> so now its clear, the mail >>> did not got deleted if i now do >>> >>> Info: robert(a)schetterer.com/Trash: no messages left >> So, it worked? "no messages left" means if you didn't give --test it >> would have deleted all messages from the mailbox. >> > Hi Timo, no it didnt work > i repeated the test since then twice > the mail was not deleted > Hi Timo, no it didnt work i repeated the test since then twice the mail was not deleted -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

1 0

[Dovecot] How to delete retrieved mail
by Don Muller 03 Aug '09

03 Aug '09

Hi All, I use Dovecot and XMail on a QNAP TS-509 NAS. QNAP has combined the two into a package they call XDove. Everything seems to be working great except for one thing. When Dovecot retrieves the mail from XMail it is not removing it from XMail. It is leaving a copy on XMail. Is there an option I can set in Dovecot so it will delete the mail message from XMail when it retrieves it. Thanks Don

2 1

[Dovecot] Client Cert Auth Problem
by Christian Felsing 03 Aug '09

03 Aug '09

Hello, is there a config possible which supports both of following authentication schemes ? 1st: If user presents a client certificate, he can log in w/o username/password, where user id comes from CN. Accepting any password is not the right solution. 2nd: If user does not present a client certificate, he have to authenticate by username/password. In both cases user data is read from userdb LDAP, which is already working. I was not able to get both auth schemes working at same time. With Postfix such a config is fully operable. regards Christian

2 1

[Dovecot] Public folders, individual SEEN flags
by Keith Edmunds 03 Aug '09

03 Aug '09

Hi list I'm trying to set up shared public folders with individual SEEN flags. I've set up three test users, but as soon as one of them marks a mail in the public folder as seen or unseen, that change is propagated to all three users. If I watch the dovecot.index.log file in each user's directory for the public folder, I see all three change their last access time as soon as one user changes the SEEN status of a mail. Any hints as to what I'm doing wrong gratefully received, thanks. -------------------------------------------------------------------------------- # dovecot --version 1.2.1 -------------------------------------------------------------------------------- # dovecot -n # 1.2.1: /etc/dovecot/dovecot.conf # OS: Linux 2.6.26-2-686 i686 Debian 5.0.2 log_timestamp: %Y-%m-%d %H:%M:%S disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/imap-login mail_privileged_group: mail namespace: type: private separator: / inbox: yes list: yes subscriptions: yes namespace: type: public separator: / prefix: shared/ location: maildir:/home/publicfolders:INDEX=~/Maildir/public list: yes auth default: passdb: driver: pam userdb: driver: passwd -------------------------------------------------------------------------------- # ls -l /home/publicfolders/dovecot-shared -rw-rw-r-- 1 publicfolders publicfolders 0 2009-07-27 15:01 /home/publicfolders/dovecot-shared --------------------------------------------------------------------------------

2 3

[Dovecot] parameter "mail_location" and variables
by maximatt 03 Aug '09

03 Aug '09

hi.... i have virtual users stored in ldap server and i must to do some modifications that requiere to chage mail_location value... the solution comes to use the "uid" value stored in ldap server for users on mail_location parameter... i can see in http://wiki.dovecot.org/Variables that i can't do them (i uses sasl authentication) so.. ¿exist any way to get a value from ldap server and use them in mail_location parameter? thanks in advance!!! -- Salu2 ;)

2 3

[Dovecot] expire plugin no delete 1.2.1
by Robert Schetterer 03 Aug '09

03 Aug '09

Hi Timo, all of my tests fail with expire plugin, mail simply not get deleted i cant find any stuff in the logs why it does not or should not work. My guess that there is a problem with virtual plugin and/or shared namespace. It shouldnt be a problem with acl starting the script over cron as root am i right ? do you have any idea why it fails, is there a way to ignore all unneeded shared or virtual namespaces ? should there be a entry in the log when expire time is reached and deletion is unsuccessfull ? -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

2 5