- dovecot - dovecot.org

[Dovecot] Migration questions...
by Richard Hobbs 15 May '09

15 May '09

Hi All, We are soon to migrate our mail server from one piece of hardware to another and we would like to take this opportunity to optimize things. As a result, we would like to replace "uw-imapd" and "qpopper" with "dovecot". The version we will be installing is 1.1.13-2, as this is what is available through the latest Debian stable backports. We will also be using exim to deliver mail (through dovecot's deliver mechanism, of course). So... We are currently using the mbox format with uw-imapd, and would like to migrate to the fastest solution possible with dovecot on the new hardware. My understanding is that "multi-dbox" is not an option in this version anyway, maildir is OK, but not great, and "single-dbox" is therefore going to be the highest performing solution. Is single-dbox the fastest way to go, considering we're going to be using email in the following ways: - IMAP connections with all email in the Inbox (Gmail-style). - IMAP connections with email split into many IMAP folders. - POP3 connections with no email left on the server. - POP3 connections with *all* email left on the server. All connections check for new mail every 5 minutes (on average) and there are 50-60 users). Also, we are not able to change user behaviour in this instance, unfortunately. Can anyone see any problems with the above proposal? Hopefully not... One problem that may arise is the fact that when we migrate, all msg UIDs will be lost. If i'm not mistaken, this means that all emails will be treated by the mail client as brand new, and if through IMAP, will all go bold, and if through POP3, will all be downloaded again (if still on the server) and therefore duplicated in the mail client. If this is the case, is there anything we can do to stop this happening? Does the "Convert" plugin does this job well? Finally, I have a rough draft of our migration plan - is there anything horribly wrong in it that's going to cause lots of problems, that anyone can spot by any chance? 1. Install Debian with exim, mysqld (for Horde/IMP) and mailman. 2. Run an online update. 3. Rsync homedirs and inboxes onto new server, ready for initial exim configuration. 4. Configure exim as per existing mail server and test that mailing lists and normal email works. You should now have the existing mail delivery solution on the brand new hardware. 5. Once mail delivery is sorted, add "deb http://www.backports.org/debian lenny-backports main contrib non-free" into "/etc/apt/sources.list" and run "aptitude update && aptitude install debian-backports-keyring && aptitude update". 6. Install dovecot (at the time of writing, this was version 1.1.13-2) and configure to use existing mbox files (inboxes in /var/spool/mail/ and IMAP folders in /home/user/mail/) 7. Setup exim to use dovecot's "deliver" mechanism for interacting with the inboxes (which are still in mbox format). 8. Configure the "convert" plugin to begin converting the mail to dbox format. 9. Run something manually (if possible) to convert mailboxes before people connect, so the task is already done by the time the outage is over. 10. Give staff access to new speedy mail server! Thanks in advance, people - any help is greatly appreciated! :-) Richard. -- Richard Hobbs (IT Specialist) Toshiba Research Europe Ltd. - Cambridge Research Laboratory Email: richard.hobbs(a)crl.toshiba.co.uk Web: http://www.toshiba-europe.com/research/ Tel: +44 1223 436999 Mobile: +44 7811 803377

14 37

[Dovecot] IMAP subfolders and MBOX format
by Frank Bonnet 14 May '09

14 May '09

Hello folks I have a problem related to the mbox format I think First we use MBOX format with Dovecot 1.14 A user's here need to create some subfolders in his Imap space. Due to the use of MBOX format this is impossible from thunderbird as you cannot creat a directory in a file :-) So to help him I created manually on the mail server some directories into his imap space, Doing so we are able to see the folder and subfolders but it is not possible to move some other folders into the subfolder via the thunderdird client. Anyone to help me a bit ? Note : on another machine which use the Maildir format I can do whatever I want without problem. Thanks a lot.

2 1

[Dovecot] id:N13388 Disable storage of messages on server when read (pop3)
by Dimitrios Karapiperis 14 May '09

14 May '09

Hi there Is there any way in dovecot to disable the storage of messages on server when they are read/downloaded by the users (POP3). The server keeps the e-mail when users tick the option on their MUA to keep (leave) messages on server. dovecot 1.0.7 POP3 / maildir Thanks in advance Dimitrios Karapiperis postmaster [at] thessaloniki [dot] gr

3 3

[Dovecot] What's faster for getting mails into Rails: Dbmail & direct MySQL or net/pop with maildir
by Olaf Spaarmann 14 May '09

14 May '09

Hi, it's my first message in this list, so please excuse any mistakes! I have a quite specific problem and nobody in the Ruby on Rails lists could help me, because it is actually more a question for mail- experts. So I hope you can help me. I'm planning to set up a mailserver using dovecot. Users of my Rails App can forward their emails (john(a)doe.com) to an personal address (john.doe(a)myapp.com ). These emails will be received by my mailserver. So far so good, the tricky part is to get the mails into my Rails App for processing them. After that they will be deleted (so I'll never accumulate a big ammount of mails on the mailserver). I thought of 2 different approaches. 1) Just use a normal Dovecot setup, using maildir and get the mails with a mailpoller script, connecting to the server via Pop3 2) Use Dbmail for storing the emails, don't use Pop3 but let the mailpoller script connect to the database directly I understand that Dbmail seems to be slower than maildir (in terms of processing many incoming mails) but I'm not sure if a connection via net/pop (of the mailpoller script) is maybe that much slower than mysql that it wouldn't matter at all. What's your opinion? I'm gratefull for every hint. Thanks

2 1

[Dovecot] X-UIDL Ignored?
by Benjamin Wakefield 14 May '09

14 May '09

Hello! I am trying to migrate from Teapop to Dovecot. I'm using Dovecot 1.1.14. I need to make use of the X-UIDL header so clients don't download messages they've already received. I have the X-UIDL head in the message. I have pop3_reuse_xuidl(pop3): yes My problem is the X-UIDL in the message is being ignored and Dovecot is still generating it's own. The INBOX is an mbx file not Maildir. Should this work? Have I missed something? Thanks! Ben ==== BEGIN dovecot -n ==== # 1.1.14: /usr/local/dovecot-1.1.14/etc/dovecot.conf # OS: Linux 2.6.24.3-smp i686 Slackware 12.0.0 log_path: /usr/local/dovecot-1.1.13/var/log/dovecot.log protocols: imap imaps pop3 listen(default): * listen(imap): * listen(pop3): *:10100 ssl_disable: yes disable_plaintext_auth: no login_dir: /usr/local/dovecot-1.1.14/var/run/dovecot/login login_executable(default): /usr/local/dovecot-1.1.14/libexec/dovecot/imap-login login_executable(imap): /usr/local/dovecot-1.1.14/libexec/dovecot/imap-login login_executable(pop3): /usr/local/dovecot-1.1.14/libexec/dovecot/pop3-login login_greeting: grape.dcsi.net.au dovecot pop3/imap server, go ahead. mail_location: mbox:~/mail:INBOX=/var/mail/%1u/%u mail_executable(default): /usr/local/dovecot-1.1.14/libexec/dovecot/imap mail_executable(imap): /usr/local/dovecot-1.1.14/libexec/dovecot/imap mail_executable(pop3): /usr/local/dovecot-1.1.14/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/dovecot-1.1.14/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/dovecot-1.1.14/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/dovecot-1.1.14/lib/dovecot/pop3 pop3_reuse_xuidl(default): no pop3_reuse_xuidl(imap): no pop3_reuse_xuidl(pop3): yes pop3_uidl_format(default): %08Xu%08Xv pop3_uidl_format(imap): %08Xu%08Xv pop3_uidl_format(pop3): %v.%u auth default: passdb: driver: shadow args: /etc/shadow passdb: driver: passwd-file args: /etc/passwd userdb: driver: passwd ==== END ====

2 2

[Dovecot] virtual mailbox users users can send, but can't read e-mail
by Ioan Nemes 13 May '09

13 May '09

Greetings, I am trying to add the second virtual mailbox domain (transco.org.au) to an existing Postfix/Dovecot/MySQL mail server. Users of the first virtual mailbox domain (transylvania.org.au) have no problems sending and receiving mail. Users belonging to the second virtual mailbox domain can successfully send mail to outside, however they won't receive the mail, though Postfix delivers the mail to the mail directories. The configuration: --------------------------------------------------------------------------------------- # dovecot --version 1.0.2 --------------------------------------------------------------------------------------- # dovecot -n # 1.0.2: /etc/dovecot.conf base_dir: /var/dovecot/ protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/dovecotcert.pem disable_plaintext_auth: no login_dir: /var/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_user: _dovecot first_valid_uid: 5000 last_valid_uid: 5000 mail_location: maildir:/var/spool/vmboxbase/%d/%u mbox_write_locks: fcntl mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): outlook-idle pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: verbose: yes debug: yes debug_passwords: yes passdb: driver: bsdauth passdb: driver: sql args: /etc/dovecot-mysql.conf userdb: driver: passwd userdb: driver: sql args: /etc/dovecot-mysql.conf ---------------------------------------------------------------------------------------------------- password_query = SELECT password FROM users WHERE login = '%u' and active = 'Y' ----------------------------------------------------------------------------------------------------- SELECT password FROM users WHERE login = 'dummy(a)transco.org.au' and active = 'Y'; mysql> SELECT password FROM users WHERE login = 'dummy(a)transco.org.au' and active = 'Y'; +---------------+ | password | +---------------+ | Wdrbd5SLusraw | +---------------+ 1 row in set (0.00 sec) ------------------------------------------------------------------------------------------------------ user_query = SELECT home, maildir, uid, gid FROM users WHERE login = 'dummy' AND active = 'Y' ------------------------------------------------------------------------------------------------------ mysql> SELECT home, maildir, uid, gid FROM users WHERE login = 'dummy(a)transco.org.au'; +----------------------+-----------------------+------+------+ | home | maildir | uid | gid | +----------------------+-----------------------+------+------+ | /var/spool/vmboxbase | transco.org.au/dummy/ | 5000 | 5000 | +----------------------+-----------------------+------+------+ 1 row in set (0.00 sec) # more /etc/dovecot-mysql.conf # This file is opened as root, so it should be owned by root and mode 0600. # # http://wiki.dovecot.org/AuthDatabase/SQL # # For the sql passdb module, you'll need a database with a table that # contains fields for at least the userid and password. If you want to # use the user@domain syntax, you might want to have a separate domain # field as well. # # If your users all have the same uig/gid, and have predictable home # directories, you can use the static userdb module to generate the home # dir based on the userid and domain. In this case, you won't need fields # for home, uid, or gid in the database. # # If you prefer to use the sql userdb module, you'll want to add fields # for home, uid, and gid. Here is an example table: # # CREATE TABLE users ( # userid VARCHAR(128) NOT NULL, # password VARCHAR(64) NOT NULL, # home VARCHAR(255) NOT NULL, # uid INTEGER NOT NULL, # gid INTEGER NOT NULL, # active CHAR(1) DEFAULT 'Y' NOT NULL # ); # Database driver: mysql, pgsql, sqlite #driver = driver = mysql # Database connection string. This is driver-specific setting. # # pgsql: # For available options, see the PostgreSQL documention for the # PQconnectdb function of libpq. # # mysql: # Basic options emulate PostgreSQL option names: # host, port, user, password, dbname # # But also adds some new settings: # client_flags - See MySQL manual # ssl_ca, ssl_ca_path - Set either one or both to enable SSL # ssl_cert, ssl_key - For sending client-side certificates to server # ssl_cipher - Set minimum allowed cipher security (default: HIGH) # # You can connect to UNIX sockets by using host: host=/var/run/mysql.sock # Note that currently you can't use spaces in parameters. # # sqlite: # The path to the database file. # # Examples: # connect = host=192.168.1.1 dbname=users # connect = host=sql.example.com dbname=virtual user=virtual password=blarg # connect = /etc/dovecot/authdb.sqlite # #connect = dbname=virtual user=virtual connect = host=localhost dbname=mail user=dovecot password=dovecot # Default password scheme. # # List of supported schemes is in # http://wiki.dovecot.org/Authentication/PasswordSchemes # #default_pass_scheme = PLAIN-MD5 default_pass_scheme = CRYPT # Query to retrieve the password. # # This query must return only one row with "user" and "password" columns. # The query can also return other fields which have a special meaning, see # http://wiki.dovecot.org/PasswordDatabase/ExtraFields # # The "user" column is needed to make sure the username gets used with exactly # the same casing as it's in the database. Note that if you store username and # domain in separate fields, you most likely want to return a combination of # them as the "user" column, otherwise the domain gets stripped. # # Commonly used available substitutions (see # http://wiki.dovecot.org/Variables for full list): # %u = entire userid # %n = user part of user@domain # %d = domain part of user@domain # # Note that these can be used only as input to SQL query. If the query outputs # any of these substitutions, they're not touched. Otherwise it would be # difficult to have eg. usernames containing '%' characters. # # Example: # password_query = SELECT concat(userid, '@', domain) AS user, password FROM users WHERE userid = '%n' AND domain = '% d' # password_query = SELECT pw AS password FROM users WHERE userid = '%u' AND active = 'Y' # password_query = SELECT password FROM users WHERE login = '%u' and active = 'Y' # Query to retrieve the user information. # # The query must return only one row. Commonly returned columns are: # uid - System UID # gid - System GID # home - Home directory # mail - Mail location # # Either home or mail is required. uid and gid are required. If more than one # row is returned or there are missing fields, the login will fail. For a list # of all fields that can be returned, see # http://wiki.dovecot.org/UserDatabase/ExtraFields # # Examples # user_query = SELECT home, uid, gid FROM users WHERE userid = '%n' AND domain = '%d' # user_query = SELECT dir AS home, user AS uid, group AS gid FROM users where userid = '%u' # user_query = SELECT home, 501 AS uid, 501 AS gid FROM users WHERE userid = '%u' # #user_query = SELECT home, uid, gid FROM users WHERE userid = '%u' user_query = SELECT home, maildir, uid, gid FROM users WHERE login = '%u' AND active = 'Y' # If you wish to avoid two SQL lookups (passdb + userdb), you can use # userdb prefetch instead of userdb sql in dovecot.conf. In that case you'll # also have to return userdb fields in password_query prefixed with "userdb_" # string. For example: #password_query = SELECT userid as user, password, home as userdb_home, uid as userdb_uid, gid as userdb_gid FROM users WHERE userid = '%u' --------------------------------------------------------------------------------------- # ps -aux | grep dovecot root 13442 0.0 0.2 676 952 ?? Ss 4:27AM 0:00.04 /usr/local/sbin/dovecot root 10354 0.0 0.4 816 1920 ?? S 4:27AM 0:00.03 dovecot-auth root 8330 0.0 0.4 708 2080 ?? S 4:27AM 0:00.03 dovecot-auth -w _dovecot 29456 0.0 0.4 664 1876 ?? S 4:27AM 0:00.04 pop3-login _dovecot 12636 0.0 0.4 716 1868 ?? S 4:27AM 0:00.04 pop3-login _dovecot 26625 0.0 0.4 696 1896 ?? S 4:27AM 0:00.04 imap-login _dovecot 4709 0.0 0.4 556 1892 ?? S 4:27AM 0:00.04 imap-login _dovecot 10294 0.0 0.4 760 1888 ?? S 4:27AM 0:00.04 imap-login _dovecot 13526 0.0 0.4 596 1888 ?? S 4:59AM 0:00.01 pop3-login root 20523 0.0 0.1 472 748 p1 S+ 5:01AM 0:00.00 grep dovecot ----------------------------------------------------------------------------------------- # ls -ltr /var/spool/vmboxbase/transco.org.au/dummy/new total 40 -rw------- 1 vmail vmail 462 May 3 11:06 1241312770.V8I6be62M630453.vega.transylvania.org.au -rw------- 1 vmail vmail 708 May 3 11:15 1241313359.V8I6be6bM976701.vega.transylvania.org.au -rw------- 1 vmail vmail 658 May 3 11:21 1241313700.V8I6bd8aM30789.vega.transylvania.org.au -rw------- 1 vmail vmail 672 May 4 02:18 1241367523.V8I6be75M268056.vega.transylvania.org.au -rw------- 1 vmail vmail 706 May 4 02:31 1241368314.V8I6be7cM742941.vega.transylvania.org.au -rw------- 1 vmail vmail 658 May 4 02:54 1241369661.V8I6bd9bM991186.vega.transylvania.org.au -rw------- 1 vmail vmail 690 May 4 03:02 1241370177.V8I6bd98M300668.vega.transylvania.org.au -rw------- 1 vmail vmail 672 May 4 03:54 1241373297.V8I6bda1M149877.vega.transylvania.org.au -rw------- 1 vmail vmail 837 May 4 04:35 1241375739.V8I6bdaeM905070.vega.transylvania.org.au -rw------- 1 vmail vmail 842 May 4 04:36 1241375767.V8I6bdb4M496268.vega.transylvania.org.au ------------------------------------------------------------------------------------------------------------- When I try to retreive mail for user dummy(a)tarnsco.org.au, the folovig entry is created in /var/log/maillog, but no mail is retrived. The mail client agent is Thunderbird 2.0.22 ------------------------------------------------------------------------------------------------------------- May 4 06:04:51 vega dovecot: auth(default): client in: AUTH 1 PLAIN service=POP3 lip=192.168.1.212 rip=192.168.1.101 resp= May 4 06:04:51 vega dovecot: auth(default): client out: CONT 1 May 4 06:04:51 vega dovecot: auth(default): client in: CONT 1 AGR1bW15QHRyYW5zY28ub3JnLmF1AGR1bW15 May 4 06:04:51 vega dovecot: auth(default): bsdauth(dummy(a)transco.org.au,192.168.1.101): lookup May 4 06:04:51 vega dovecot: auth(default): bsdauth(dummy(a)transco.org.au,192.168.1.101): unknown user May 4 06:04:51 vega dovecot: auth-worker(default): sql(dummy(a)transco.org.au,192.168.1.101): query: SELECT password FROM users WHERE login = 'dummy(a)transco.org.au' and active = 'Y' May 4 06:04:51 vega dovecot: auth(default): client out: OK 1 user=dummy(a)transco.org.au May 4 06:04:51 vega dovecot: auth(default): master in: REQUEST 31 29200 1 May 4 06:04:51 vega dovecot: auth(default): passwd(dummy(a)transco.org.au,192.168.1.101): lookup May 4 06:04:51 vega dovecot: auth(default): passwd(dummy(a)transco.org.au,192.168.1.101): unknown user May 4 06:04:51 vega dovecot: auth-worker(default): sql(dummy(a)transco.org.au,192.168.1.101): SELECT home, maildir, uid, gid FROM users WHERE login = 'dummy(a)transco.org.au' AND active = 'Y' May 4 06:04:51 vega dovecot: auth(default): master out: USER 31 dummy(a)transco.org.au home=/var/spool/vmboxbase maildir=transco.org.au/dummy/ uid=5000 gid=5000 May 4 06:04:51 vega dovecot: pop3-login: Login: user=<dummy(a)transco.org.au>, method=PLAIN, rip=192.168.1.101, lip=192.168.1.212 May 4 06:04:51 vega dovecot: POP3(dummy(a)transco.org.au): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0 Any suggestion? Regards, Ioan

2 1

[Dovecot] Only specifying lda in protocols?
by Brandon Lamb 13 May '09

13 May '09

protocols = lda Should this give me fatal errors when trying to do a dovecot -n I get # 1.2.rc3: /etc/dovecot/dovecot.conf Error: Invalid protocols given in configuration file Fatal: Invalid configuration in /etc/dovecot/dovecot.conf Dovecot starts and functions fine though

2 1

[Dovecot] Dovecot 1.0.7 domain variable
by elliott＠n.localhost 13 May '09

13 May '09

Hi all, Thanks in advance for any help! I'm trying to configure Dovecot to pull emails from Postfix virtual mailbox domain Maildirs under /var/mail/vhosts/<domain>/<username>. I've set mail_location as such in dovecot.conf: mail_location = maildir:/var/mail/vhosts/%d/%n but from debug output I see the domain is blank: dovecot: May 10 20:49:25 Info: IMAP(elliott): maildir: data=/var/mail/vhosts//elliott I've set elliott(a)n.0o0.bz as my username in Outlook so it is sending the domain (and changed auth_username_format to "auth_username_format = %n" so authentication works fine) Why is %d blank here? Anything else to check?? I'm at a loss. Thanks! -elliott-

5 5

[Dovecot] New messages notification - (IMAP PUSH?)
by Proskurin Kirill 13 May '09

13 May '09

Hello all. I have strange problem. As I understand IMAP use server2client command to tell what new email is arrived. So - all was good, but few weeks ago I notice what my thunderbird not show new messages. I think it was local problem(I switch distro what day) but soon my email clients what uses mostly Outlook-2007-SP1 start to confirm this problem. What can it be and how can I fix it? I use Dovecot on FreeBSD-7.1 #pkg_info | grep dovecot dovecot-1.1.11 dovecot-managesieve-0.10.5 dovecot-sieve-1.1.6 #dovecot -n # 1.1.11: /usr/local/etc/dovecot.conf # OS: FreeBSD 7.1-RELEASE-p3 i386 ufs base_dir: /var/run/dovecot/ log_path: /var/log/dovecot/dovecot.log info_log_path: /var/log/dovecot/dovecot-debug.log protocols: imap imaps pop3 pop3s managesieve listen(default): * listen(imap): * listen(pop3): * listen(managesieve): *:2000 ssl_ca_file: /usr/local/etc/certs/GlobalSignCA.crt ssl_cert_file: /usr/local/etc/certs/fxclub_org.crt ssl_key_file: /usr/local/etc/certs/fxclub_org.key ssl_cipher_list: ALL:!LOW:!SSLv2 login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login login_executable(managesieve): /usr/local/libexec/dovecot/managesieve-login login_greeting_capability(default): yes login_greeting_capability(imap): yes login_greeting_capability(pop3): no login_greeting_capability(managesieve): no login_process_size: 128 login_processes_count: 20 login_max_processes_count: 512 mail_max_userip_connections(default): 256 mail_max_userip_connections(imap): 256 mail_max_userip_connections(pop3): 20 mail_max_userip_connections(managesieve): 10 verbose_proctitle: yes first_valid_gid: 0 mail_privileged_group: mail mail_uid: dmail mail_gid: dmail mail_location(default): maildir:/var/spool/dovecot/domains/%d/%n/ mail_location(imap): maildir:/var/spool/dovecot/domains/%d/%n/ mail_location(pop3): maildir:/var/spool/dovecot/domains/%d/%n/ mail_location(managesieve): mail_debug: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_executable(managesieve): /usr/local/libexec/dovecot/managesieve mail_process_size: 512 mail_plugins(default): quota imap_quota autocreate mail_plugins(imap): quota imap_quota autocreate mail_plugins(pop3): quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 mail_plugin_dir(managesieve): /usr/local/lib/dovecot/managesieve imap_client_workarounds(default): delay-newmail tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail tb-extra-mailbox-sep imap_client_workarounds(pop3): imap_client_workarounds(managesieve): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh pop3_client_workarounds(managesieve): sieve_storage(default): sieve_storage(imap): sieve_storage(pop3): sieve_storage(managesieve): % sieve(default): sieve(imap): sieve(pop3): sieve(managesieve): ~/.dovecot.sieve auth default: mechanisms: plain login user: dovecot-auth username_format: %Lu verbose: yes worker_max_count: 100 passdb: driver: ldap args: /usr/local/etc/dovecot-ldap.conf userdb: driver: ldap args: /usr/local/etc/dovecot-ldap.conf socket: type: listen client: path: /var/run/dovecot/auth-client mode: 432 user: exim master: path: /var/run/dovecot/auth-master mode: 384 user: dmail plugin: quota: maildir quota_rule: *:storage=1024M quota_rule2: Trash:storage=1256M quota_rule3: SPAM:ignore quota_warning: storage=80%% /usr/local/bin/quota-warning.sh 80 quota_warning2: storage=95%% /usr/local/bin/quota-warning.sh 95 autocreate: Trash autocreate2: Sent autocreate3: Spam autosubscribe: Trash autosubscribe2: Sent autosubscribe3: Spam -- Best regards, Proskurin Kirill

6 15

[Dovecot] Dovecot shared quota with Maildir
by Jorgen Lundman 13 May '09

13 May '09

Hello list, We are in the process of exploring the idea of moving from UFS with fs-quota to using softquotas in Dovecot (probably Maildir type, stored in LDAP, all ontop of NFS). I have it setup, and it works rather well so far. But there is one situation we can currently support, which I can not see a solution for with soft-quotas. Generally customers get 1 email, with 1 quota. But it is also possible for customers to get 1 quota, but create multiple mail accounts, all sharing the same quota. This is done by using the same UID for each account when using fs-quota. (It is not that each account gets a fraction of the quota, but that all accounts add up to the one quota). Is this still possible to do with soft-quotas. To share one set. Dovecot would have to go count files in multiple mail-directories so I would guess no. Lund -- Jorgen Lundman | <lundman(a)lundman.net> Unix Administrator | +81 (0)3 -5456-2687 ext 1017 (work) Shibuya-ku, Tokyo | +81 (0)90-5578-8500 (cell) Japan | +81 (0)3 -3375-1767 (home)

2 4