- dovecot - dovecot.org

[Dovecot] MoinMoin wiki updated
by Timo Sirainen 16 Mar '09

16 Mar '09

I finally upgraded to MoinMoin v1.8.2 from old v1.5.8. Let me know if something doesn't work right.

1 0

[Dovecot] fstat(mboxname.lock) failed: Bad file descriptor
by Mark Sapiro 16 Mar '09

16 Mar '09

I have just upgraded from 1.2.beta1 to 1.2.beta2. My configuration is: [root@sbh16 ~]# dovecot -n # 1.2.beta2: /usr/local/etc/dovecot.conf # OS: Linux 2.6.18-8.1.14.el5 i686 CentOS release 5 (Final) protocols: pop3 pop3s imap imaps ssl_cert_file: /etc/postfix/sbh16-cert.pem ssl_key_file: /etc/postfix/sbh16-key.pem login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login mail_privileged_group: mail mail_location: mbox:~/Mail:INBOX=/var/spool/mail/%u mbox_write_locks: fcntl dotlock mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 pop3_lock_session(default): no pop3_lock_session(imap): no pop3_lock_session(pop3): yes auth default: mechanisms: plain apop login worker_max_count: 5 passdb: driver: passwd-file args: /usr/local/etc/dovecot.passwd passdb: driver: pam userdb: driver: passwd socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix [root@sbh16 ~]# This represents one change from the previous config. Previously with pop3_lock_session = yes, I needed mail_access_group = mail. With the upgrade to beta2, I changed that to mail_privileged_group = mail as shown above. Now, during a session lasting several seconds, I see the following in maillog: Mar 15 09:35:51 sbh16 dovecot: pop3-login: Login: user=<mark>, method=APOP, rip=68.183.193.239, lip=72.52.113.16, TLS Mar 15 09:36:01 sbh16 dovecot: POP3(mark): fstat(mark.lock) failed: Bad file descriptor Mar 15 09:36:04 sbh16 dovecot: POP3(mark): Disconnected: Logged out top=0/0, retr=1/1919972, del=0/328, size=5381253 Mar 15 09:36:04 sbh16 dovecot: child 9023 (pop3) killed with signal 11 (core dumps disabled) This does not occur with shorter sessions lasting only a few seconds or less. The only symptom is the log messages. The client sees nothing unusual, at least in this case where the session is a retrieval of one large message. I haven't tried long sessions retrieving multiple messages. If I remove pop3_lock_session = yes, the issue does not occur. I don't think I need it. I put it in a long time ago to attempt to solve a problem that was actually caused by something else. Since removing it does seem to avoid this issue, I will leave it out, but I'm reporting this anyway as it seems there may be some underlying problem. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

2 2

[Dovecot] pop-proxy to redundant servers ?
by Jan-Frode Myklebust 15 Mar '09

15 Mar '09

I'm considering putting two servers with failover IP-addresses in front of our pop/imap cluster, with dovecot in proxy-mode running on both servers. But, can dovecot handle more than one backend server for each user ? I.e. I would want to point the dovecot proxy to send userX to backend-server1, or backend-server2 if backend-server1 is down. Is something like that possible ? -jf

2 2

[Dovecot] Can't compile v1.2.beta2 w/o linux-quota
by Pascal Volk 15 Mar '09

15 Mar '09

Hi Timo, make dies with an error: quota-fs.c: In function ‘fs_quota_get_linux’: quota-fs.c:456: error: ‘no’ undeclared (first use in this function) quota-fs.c:456: error: (Each undeclared identifier is reported only once quota-fs.c:456: error: for each function it appears in.) make[4]: *** [quota-fs.lo] Error 1 One of the configure options was: --without-linux-quota Regards, Pascal -- The trapper recommends today: deadbeef.0907402(a)localdomain.org

2 2

[Dovecot] v1.1.12 and v1.2.beta2 released
by Timo Sirainen 14 Mar '09

14 Mar '09

http://dovecot.org/releases/1.1/dovecot-1.1.12.tar.gz http://dovecot.org/releases/1.1/dovecot-1.1.12.tar.gz.sig http://dovecot.org/releases/1.2/beta/dovecot-1.2.beta2.tar.gz http://dovecot.org/releases/1.2/beta/dovecot-1.2.beta2.tar.gz.sig I thought I'd do a double-release since it's Friday the 13th. v1.2.0 is getting closer, mainly some ACL fixes left. Changes in v1.2.beta2 since beta1: * Authentication userdb: Renamed system_user to system_groups_user. Probably pretty much no one used this feature. * deliver no longer creates temp files to /tmp. They're instead created to the users' mailbox directories. - IMAP: Fixed SORT command crashing - POP3 was broken in beta1 - Fixes to virtual mailboxes - Fixes to IMAP ACL support Changes in both v1.1.12 and v1.2.beta2: * Added :MAILBOXDIR= to mail_location to specify the root dir for mailboxes. dbox users should migrate to ":MAILBOXDIR=mailboxes", because that's going to be the default in v1.2+. + Linux: Adding -D parameter to login_executable makes login processes dump core to login_dir if they crash. - IMAP: SELECT didn't always return first unseen message in reply - POP3: pop3_lock_session=yes didn't use mail_privileged_group while dotlocking. - mbox: Don't crash if >=8192 bytes long line begins with "From ". - Maildir: More fixes to handling over 26 keywords. - Several logging fixes and improvements - Fixed authentication caching with non-plaintext mechanisms when using a blocking passdb (e.g. MySQL) - Fixed DIGEST-MD5 authentication with user@domain style usernames.

2 1

[Dovecot] setting up both system password users AND virtual users
by Jim Pazarena 14 Mar '09

14 Mar '09

I'm afraid that I am a rookie at dovecot, and cannot seem to figure the configuration for a dual system & virtual setup. For now I am using POP3 ---only--- I've got the "system" working, but cannot figure out how to add the virtual system. The docs aren't quite clear enough for me to understand. The wiki example for dynamic passwd-file locations shows: mail_location = maildir:/home/%d/%n/Maildir userdb passwd-file etc etc I am using mbox, not maildir, AND I've already used mail_location for my system accounts with the following line: mail_location = mbox:~/mail/:INBOX=/mail/%u In the case of my virtual users, the mail is stored in INBOX=/mail/VIRTUAL/%d/%u and the password file is stored in /exim/etc/VIRTUAL/%d/passwd would someone kindly help me with this? thanks!

3 2

[Dovecot] pam_authenticate() failed: authentication error
by Zbigniew Szalbot 14 Mar '09

14 Mar '09

Hello, I would like to ask for your help. I have noticed some error messages issued by dovecot. Mar 13 20:00:57 relay dovecot: auth-worker(default): pam(example(a)example.com): pam_authenticate() failed: authentication error (/etc/pam.d/dovecot missing?) Not surprisingly $ l /etc/pam.d/dovecot ls: /etc/pam.d/dovecot: No such file or directory The funny thing is that authentication does work but I guess I have something misconfigured. I'd appreciate if you could help me. I am on a FreeBSD system (7.0) if that matters. Thank you! -- Zbigniew Szalbot

5 8

[Dovecot] How can i override mail_location?
by Zhang Huangbin 14 Mar '09

14 Mar '09

Hi, all. I use dovecot-1.1.11 with OpenLDAP backend. but i found the mail_location is not correct. How can i override mail_location setting in dovecot.conf? LDAP user data and dovecot config are attached below. in dovecot config, mail_location is: ---- mail_location = maildir:/%Lh/%Ld/%Ln/:INDEX=/%Lh/%Ld/%Ln/ ---- but the correct maildir should be 'homeDirectory' + 'mailMessageStore': ---- maildir:/home/vmail/a.cn/w/ww/www/ ---- LDAP user: ---- dn: mail=www(a)a.cn,ou=Users,domainName=a.cn,o=domains,dc=iredmail,dc=org objectClass: inetOrgPerson objectClass: mailUser objectClass: top cn: www sn: www uid: www mail: www(a)a.cn accountStatus: active homeDirectory: /home/vmail mailQuota: 104857600 userPassword: {SSHA}crkYO5tg8KRkOY7W3bRgjtLQ+79U4NgG enabledService: mail enabledService: smtp enabledService: pop3 enabledService: imap enabledService: deliver mailMessageStore: a.cn/w/ww/www/ ---- Dovecot ldap config file: ---- user_attrs = homeDirectory=home,=sieve_dir=/home/vmail/sieve/%Ld/%Ln/,mailMessageStore=maildir:mail,mailQuota=quota_rule=*:bytes=%$ ---- Dovecot main config file: ---- # dovecot -n # 1.1.11: /etc/dovecot.conf # OS: Linux 2.6.18-128.el5 x86_64 Red Hat Enterprise Linux Server release 5.3 (Tikanga) log_path: /var/log/dovecot.log protocols: pop3 pop3s imap imaps listen: * ssl_cert_file: /etc/pki/iRedMail/SSL_Cert.pem ssl_key_file: /etc/pki/iRedMail/SSL_Key.pem login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_uid: 500 mail_gid: 500 mail_location: maildir:/%Lh/%Ld/%Ln/:INDEX=/%Lh/%Ld/%Ln/ mail_debug: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota zlib mail_plugins(imap): quota imap_quota zlib mail_plugins(pop3): quota zlib mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login default_realm: a.cn user: vmail passdb: driver: ldap args: /etc/dovecot-ldap.conf userdb: driver: ldap args: /etc/dovecot-ldap.conf socket: type: listen client: path: /var/spool/postfix/dovecot-auth mode: 438 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 438 user: vmail group: vmail plugin: quota: maildir quota_rule: *:storage=10M expire: Trash 7 Trash/* 7 Junk 30 expire_dict: proxy::expire auth_socket_path: /var/run/dovecot/auth-master sieve: /home/vmail/sieve/%Ld/%Ln/.dovecot.sieve dict: expire: db:/var/lib/dovecot/expire/expire.db ---- -- Best regards. Zhang Huangbin - Open Source Mail Server Solution for RHEL/CentOS 5.x: http://code.google.com/p/iredmail/

3 5

Re: [Dovecot] using passwd userdb with sql passdb
by Timo Sirainen 14 Mar '09

14 Mar '09

On Fri, 2009-03-13 at 16:18 -0700, Shane W wrote: > The problem may be the shane@ bit. If I delete the sql > entry, the lookup just shows 'shane'. I'm not loging in > with @ but my query does use the username,domain syntax for > instances of virtual users which don't use passwd userdb: > select username,domain,password from users > WHERE username = '%n' AND domain = '%d' Does the domain field contain an empty string instead of NULL? If so, I think the behavior is correct. Maybe change the query to: where username = '%n' and (domain = '%d' or ('%d' = '' and domain is null)) And change all the domain='' to domain=NULL.

1 0

Re: [Dovecot] Problem with sasl auth with postfix...
by Douglas M. Stanley 14 Mar '09

14 Mar '09

----- "Timo Sirainen" <tss(a)iki.fi> wrote: > On Fri, 2009-03-13 at 16:40 -0400, Douglas M. Stanley wrote: > > Yep, postfix is installed: > > > > mailserver:/etc/postfix# postconf -h mail_owner > > postfix > .. > > > Mar 13 19:16:30 mailserver dovecot: auth(default): User doesn't > exist: postfix > > Does your Postfix installation actually work? What user do you see > running the Postfix processes? Yep, works fine. The user running the postfix processes is postfix: root 4219 1 0 19:28 ? 00:00:00 /usr/lib/postfix/master postfix 4302 4219 0 19:48 ? 00:00:00 qmgr -l -t fifo -u postfix 4319 4219 0 19:49 ? 00:00:00 tlsmgr -l -t unix -u -c postfix 4352 4219 0 21:27 ? 00:00:00 pickup -l -t fifo -u -c Thanks, Doug

2 3