- dovecot - dovecot.org

[Dovecot] DIGEST-MD5 user/realm mismatch with Postfix
by Darren Pilgrim 22 Feb '09

22 Feb '09

This is a follow-on to the "SQL field format for digest-md5?" thread. After some additional debugging, I've found the problem is a mismatch in what Dovecot expects and Postfix uses for the user and realm. For a username "user(a)example.com" and password "sekret", Dovecot expects: username = "user" realm = "example.com" but Postfix sends the checksum of: username = "user(a)example.com" realm = "" How do I fix this?

2 1

Re: [Dovecot] Concurrent POP3 Sessions Issues
by Timo Sirainen 22 Feb '09

22 Feb '09

Did you already solve this? If not, just mail the strace output to me privately and I'll take a look at it. On Fri, 2009-01-30 at 09:39 -0300, Mauricio López Riffo wrote: > Timo, > > What messages should be see? I execute the commands and shows a lot > of messages, i dont know what it means, i m not a programmer :) > > > Thanks > > ---- > > Mauricio López Riffo > Red Hat Certified Engineer > 804006455319519 > Netline Telecomunicaciones Chile > Los Conquistadores 2430, Providencia, Santiago. > Codigo Postal: 7530041 > Fono: +562 6560600 > Móvil: +569 90992366 > > > -----Mensaje original----- > > De: Timo Sirainen [mailto:tss@iki.fi] > > Enviado el: jueves, 29 de enero de 2009 20:46 > > Para: mauricio.lopez(a)netline.net; Dovecot Mailing List > > Asunto: Re: [Dovecot] Concurrent POP3 Sessions Issues > > > > On Jan 29, 2009, at 1:17 PM, Mauricio López Riffo wrote: > > > > > I have problems with dovecot + ldap + nfs, we could't have more than > > > 20 concurrent sessions of pop3, when user 21 comes, the auth process > > > takes more than 1 sec and is incresing (while most users arrives, more > > > delay in > > > autenticacion exists) and my customers complaint about the service. > > > We need > > > support about 200 concurrents pop3 users, here is my details > > > > Someone else was recently complaining about the same thing. Or was it you? > Anyway, > > dovecot-auth doesn't know how many users are logged in so if the problem > really is 21 > > *concurrent users* instead of n logins/ second, I find it highly unlikely > that the problem is > > with authentication. > > > > My guess is that this has something to do with NFS. Perhaps start Dovecot > with strace -tt -f > > dovecot and then when it's slowing down see what syscall it says is > blocking. >

1 0

[Dovecot] One Dovecot serving 2 domains - possible?
by k bah 22 Feb '09

22 Feb '09

I'm talking about Dovecot 1.0.x, since 1.1.x showed some problems on some of my servers. -- Is it possible to have Dovecot on one machine serving two different domains? How can I set the mailboxes root to one domain to /dir1/ and to the other domain to /dir2/ ? I want all mailboxes from one domain to reside on a different mailbox root. I use Dovecot LDA. Is is possible to set a LDAP config to one domain and another LDAP config to the other (the auth part, I wan't users to reside on different bases on my LDAP tree, so search bases need to be different) thanks in advance = Scrublade Wipers New, Heavy Duty, wiper design to remove bugs and road slime. http://a8-asy.a8ww.net/a8-ads/adftrclick?redirectid=2b9f0c9f1afcc5e7181028e… -- Powered by Outblaze

2 1

[Dovecot] auth-worker always opens PAM session
by Miguel Di Ciurcio Filho 21 Feb '09

21 Feb '09

I'm using Dovecot 1.1.7 on CentOS 5.2. I've changed my passdb from passwd to pam, it works fine, but I've found this messages on /var/log/secure: dovecot-auth: PAM adding faulty module: /lib64/security/pam_limits.so dovecot-auth: PAM unable to dlopen(/lib64/security/pam_limits.so) dovecot-auth: PAM [error: /lib64/security/pam_limits.so: failed to map segment from shared object: Cannot allocate memory] Latter I realized that my auth_process_size was 64. Changed it to 128 and problem solved. But I suspect that dovecot should not be opening sessions, because there is no session=yes on my passdb configuration. According to the docs: args = dovecot [session=yes] [setcred=yes] [failure_show_msg=yes] [cache_key=<key>] [<service name>] session=yes makes Dovecot open and immediately close PAM session. Some PAM plugins need this to work, such as pam_mkhomedir. I checked the source code in passdb-pam.c: struct pam_passdb_module { struct passdb_module module; const char *service_name, *pam_cache_key; unsigned int pam_setcred:1; unsigned int pam_session:1; unsigned int failure_show_msg:1; }; And this: /* -session for backwards compatibility */ if (strcmp(t_args[i], "-session") == 0 || strcmp(t_args[i], "session=yes") == 0) module->pam_session = TRUE; It seams to me that the session is going to be opened anyway, since pam_session is always TRUE. Regards, Miguel

2 3

[Dovecot] quota and dict quota
by Osvaldo Alvarez Pozo 21 Feb '09

21 Feb '09

Hi I am running dovecot with quota. as show in this part of dovecot.conf . protocols = imap pop3 protocol imap { mail_plugins = quota imap_quota imap_client_workarounds = outlook-idle delay-newmail } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } protocol lda { mail_plugins = quota log_path = /var/log/dovecot-deliver.log info_log_path = /var/log/dovecot-deliver.log } Now I want to see the users's use of quota in postfixadmin, wich demende the use of dict quota. That is wath I do not understang. Can I have dict quota and mail_plugins=quota at the same time? How do I do? Thanks

2 5

[Dovecot] Dovecot 1.2.beta1 Backtrace POP3
by Steven King 21 Feb '09

21 Feb '09

I am testing out the new Dovecot 1.2.beta1 software. I am getting reports from people using POP3 that it randomly drops connections. Looking at the log file I see that the POP3 process they were connecting to panics and dumps a Raw bactrace. Below is a copy of the logs (IP addresses striped for security): dovecot: Feb 21 13:10:45 Info: auth(default): passwd-file(janna(a)jantics.com,x.x.x.x): lookup: user=janna(a)jantics.com file=/etc/postfix/passwd dovecot: Feb 21 13:10:45 Info: auth(default): master out: USER 3340 janna(a)jantics.com uid=1005 gid=102 home=/var/mail/vhosts/%d/%n quota=maildir quota_rule=*:storage=100M quota_rule2=Trash:storage=50M dovecot: Feb 21 13:10:45 Panic: POP3(janna(a)jantics.com): Trying to allocate 0 bytes dovecot: Feb 21 13:10:45 Error: POP3(janna(a)jantics.com): Raw backtrace: pop3 [0x80d18fc] -> pop3 [0x80d195a] -> pop3 [0x80d125b] -> pop3 [0x80db683] -> pop3(i_malloc+0x15) [0x80d5ee5] -> pop3(client_create+0x503) [0x805c573] -> pop3(main+0x3ce) [0x805e00e] -> /lib/libc.so.6(__libc_start_main+0xe0) [0xb7e39390] -> pop3 [0x805b7e1] dovecot: Feb 21 13:10:45 Error: child 26895 (pop3) killed with signal 6 dovecot: Feb 21 13:10:45 Info: pop3-login: Login: user=<janna(a)jantics.com>, method=PLAIN, rip=69.54.221.129, lip=x.x.x.x -- Steve King Network Engineer - Liquid Web, Inc. Cisco Certified Network Associate CompTIA Linux+ Certified Professional CompTIA A+ Certified Professional

2 2

[Dovecot] Maildir with INBOX and other folders at same level
by Seth Rhudy 21 Feb '09

21 Feb '09

Hello- I have set up Dovecot before and feel fairly comfortable with it but am having some issues with a new setup and have not been able to find a solution via Google or the list archives. I use offlineiimap to sync an IMAP account with an email provider. After the sync is complete, my ~/Maildir is set up with a folder called INBOX (with cur,new,tmp inside) and all my other folders set up at same level as INBOX (also with cur,new,tmp inside): ~/Maildir INBOX cur new tmp Otherfolder1 cur new tmp Otherfolder2 cur new tmp etc.. This email provider says that they use '/' as the IMAP folder separator so '.' can be used in folder names. Anyway, I am using Dovecot 1.0.15 on Debian Lenny and can't seem to get Dovecot to recognize this folder structure and display it in my MUA. In my dovecot.conf, I have: mail_location = maildir:~/Maildir When I fire up my MUA it connects fine but does not display anything -- the INBOX is empty and the other folders are not there. I have tried various configurations with the namespace private {} section but without success. What am I missing? Thank you in advance for your assistance.

2 2

[Dovecot] Sendmail + Deliver as an LDA probs
by ben 21 Feb '09

21 Feb '09

Hi, I'm having trouble setting up sendmail to be able to use dovecot deliver as an LDA... I don't want to be able to deliver mail locally, everything should go via deliver (virtual user setup)... And i'm confused about all the procmail/lda entry's in different sendmail config files... When using $# deliver -u testuser < testmail <-- he delivers my mail in the correct mailbox as stated in my dovecot passdb file homedir. So deliver is working fine ! ---- I used the dovecot.m4 from wiki.dovecot.org/LDA/sendmail sendmail.mc fragment (only lines affecting Local delivery) : DOMAIN(`blaat')dnl MODIFY_MAILER_FLAGS(`LOL', `-S')dnl FEATURE(`local_procmail')dnl define(`LOL_MAILER_PATH',`/usr/bin/procmail')dnl define(`PROCMAIL_MAILER_PATH',`/usr/bin/procmail')dnl dnl MAILER(`local')dnl MAILER(`smtp')dnl MAILER(`procmail')dnl MAILER(`dovecot')dnl dnl ------ blaat.m4 fragment : define(`LOCAL_MAILER_PATH',`/usr/bin/procmail') define(`PROCMAIL_MAILER_PATH',`/usr/bin/procmail') ------ more /usr/local/src/sendmail-x.x/cf/mailer/dovecot.m4 : ######################*****############## ### DOVECOT Mailer specification ### ##################*****################## Mdovecot, P=/opt/dovecot/libexec/dovecot/deliver, F=DFMPhnu9, S=EnvFromSMTP/HdrFromSMTP, R=EnvToSMTP/HdrFromSMTP, T=DNS/RFC822/X-Unix, A=deliver -d $u ------- virtusertable/virtusertable.db : test(a)testdomain.com blaatuser --------- aliases/aliases.db : blaatuser | /opt/dovecot/libexec/dovecot/deliver -d $u ---- sendmail.cw = empty ----- mailertable/mailertable.db : testdomain.com dovecot:dovecot ################# When I run #$ sendmail -bv test(a)testdomain.com sendmail gives : test(a)testdomain.com... deliverable: mailer local, user test (as a matter of fact the user test does exist on my machine, so what he does is stripping of the domainname and he delivers the mail in /var/spool/mqueue/test :-/ ) And I don't see anything in my deliver logfile of course... Help would be appreciated ! thx Ben

2 5

[Dovecot] v1.2.beta1 virtual plugin raw trace
by Robert Schetterer 21 Feb '09

21 Feb '09

Hi Timo, using 1.2 beta with virtual plugin testing parallel imap/pop3 download with dovecot-virtual virtual/INBOX -Trash -Trash/* all dovecot: Feb 11 07:03:08 Panic: POP3(.....@.....): file mailbox-list.c: line 420 (mailbox_list_iter_init_multiple): assertion failed: (*patterns != NULL) dovecot: Feb 11 07:03:08 Error: POP3(....@.....): Raw backtrace: pop3 [0x80ddb01] -> pop3 [0x80ddb82] -> pop3 [0x80dd529] -> pop3 [0x80a609c] -> pop3(mailbox_list_iter_init_namespaces+0xed) [0x80a623d] -> /usr/lib/dovecot/modules/pop3/lib20_virtual_plugin.so(virtual_config_read+0x706) [0xb7ddbec6] -> /usr/lib/dovecot/modules/pop3/lib20_virtual_plugin.so [0xb7ddda0b] -> /usr/lib/dovecot/modules/pop3/lib20_mail_log_plugin.so [0xb7de42ea] -> /usr/lib/dovecot/modules/pop3/lib10_quota_plugin.so [0xb7df014a] -> pop3(mailbox_open+0x52) [0x80a4772] -> pop3(client_create+0x16f) [0x805edcf] -> pop3(main+0x416) [0x8060e96] -> /lib/tls/i686/cmov/libc.so.6(__libc_start_main+0xe0) [0xb7e0b450] -> pop3 [0x805e3d1] as allready described * -Trash -Trash/* all produces Virtual mailbox loops: INBOX dovecot: Feb 11 07:02:00 Error: POP3(....@.....): Couldn't open INBOX: Internal error occurred. Refer to server log for more information. [2009-02-11 07:02:00] whatever i tried setup cant get virtual plugin to work as awaited -- Best Regards MfG Robert Schetterer Germany/Munich/Bavaria

2 1

[Dovecot] location of temporary files in deliver
by Stuart Henderson 21 Feb '09

21 Feb '09

deliver has the following: -- -- -- /* After buffer grows larger than this, create a temporary file to /tmp where to read the mail. */ #define MAIL_MAX_MEMORY_BUFFER (1024*128) ... static struct istream *create_raw_stream(int fd, time_t *mtime_r) ... input = i_stream_create_seekable(input_list, MAIL_MAX_MEMORY_BUFFER, "/tmp/dovecot.deliver."); -- -- -- On most of my systems, /tmp is relatively small (a few hundred MB, and sometimes on ramdisk), and I like to use /var/tmp for larger temp space. I just had a problem where I exceeded the space available in /tmp while delivering a (multi recipient) message and had to modify the above line to use an alternative location, and recompile. Would it be appropriate to make this a configurable option instead? Thanks. Feb 3 15:14:51 mh1-pl7 deliver(169(a)example.com): write_full(/tmp/dovecot.deliver....) failed: No space left on device Feb 3 15:14:51 mh1-pl7 deliver(149(a)example.com): write_full(/tmp/dovecot.deliver....) failed: No space left on device Feb 3 15:14:51 mh1-pl7 deliver(opx-cc(a)example.com): write_full(/tmp/dovecot.deliver....) failed: No space left on device Feb 3 15:14:51 mh1-pl7 deliver(142(a)example.com): write_full(/tmp/dovecot.deliver....) failed: No space left on device Feb 3 15:14:51 mh1-pl7 deliver(165(a)example.com): write_full(/tmp/dovecot.deliver....) failed: No space left on device Feb 3 15:14:51 mh1-pl7 deliver(152(a)example.com): stat(/tmp/Dovecot Delivery Mail) failed: No space left on device Feb 3 15:14:51 mh1-pl7 deliver(152(a)example.com): msgid=<49885EB9.60706(a)example.com>: save failed to INBOX: BUG: Unknown internal error Feb 3 15:14:51 mh1-pl7 deliver(152(a)example.com): sieve runtime error: Keep: Generic Error Feb 3 15:14:51 mh1-pl7 deliver(152(a)example.com): sieve_execute_bytecode(/home/vmail/example.com/152/.dovecot.sievec) failed Feb 3 15:14:51 mh1-pl7 deliver(125(a)example.com): stat(/tmp/Dovecot Delivery Mail) failed: No space left on device Feb 3 15:14:51 mh1-pl7 deliver(125(a)example.com): msgid=<49885EB9.60706(a)example.com>: save failed to INBOX: BUG: Unknown internal error Feb 3 15:14:51 mh1-pl7 deliver(125(a)example.com): sieve runtime error: Keep: Generic Error Feb 3 15:14:51 mh1-pl7 deliver(125(a)example.com): sieve_execute_bytecode(/home/vmail/example.com/125/.dovecot.sievec) failed

2 1