- dovecot - dovecot.org

[Dovecot] qmail + dovecot & vmail
by Peter Van den Wildenbergh 11 Apr '08

11 Apr '08

Hi List, I have a working qmail server and installed dovecot trying to setup vmail... it's not going as expected... What is working: qmail I can log-in using Thunderbird (IMAP) from dovecot-info.log dovecot: Apr 10 21:19:54 Info: imap-login: Login: user=<peter(a)---.com>, method=PLAIN, rip=192.168.10.50, lip=192.168.10.188 Config bits: Ubuntu (command-line system) 7.10 ls -l /home drwxr-xr-- 2 vmail vmail ... vmail UID GID for vmail = 500 Content of /etc/dovecot/dovecot.conf protocols = imap imaps log_path = /var/log/dovecot.log info_log_path = /var/log/dovecot-info.log ssl_disable = yes disable_plaintext_auth = no mail_location = maildir:~/Maildir dotlock_use_excl=yes maildir_copy_with_hardlinks=yes auth_verbose = yes auth default { mechanisms = plain passdb passwd-file { args = /etc/dovecot/passwd } userdb static { args = uid=500 gid=500 home=/home/vmail/%d/%n } } cat /etc/dovecot/passwd peter@meta-logica.com:{SSHA}iDMg--- peter@wilboo.org:{SSHA}iDMg--- cat /var/qmail/control/defaultdelivery |/var/qmail/bin/preline -f /usr/lib/dovecot/deliver -d $EXT@$USER (LWQ setup - verified location of 'deliver') Looks like local delivery for qmail is NOT working :-( from the logs: starting delivery 8: msg 3752525 to local peter@ma--- status: local 1/10 remote 0/20 delivery 8: deferral: Can't_open_log_file_/var/log/dovecot.log:_Permission_denied/ status: local 0/10 remote 0/20 status: exiting permission on /var/log/dovecot.log = -rw-r--r-- 1 vmail vmail 728 2008-04-10 21:36 /var/log/dovecot.log qmailctl stat messages in queue: 7 messages in queue but not yet preprocessed: 3 So I assume that the inability to 'log' is stopping the delivery process... Couldn't find anything obvious on google. Any suggestions? Regards Peter

1 0

[Dovecot] Sieve Frustrations
by Shawn 10 Apr '08

10 Apr '08

I'm soooo close, but this last little thing is eluding me... I have the following Sieve rule in my global sieve rule: require ["fileinto"]; # Move spam to spam folder if header :contains "X-Spam-Flag" "YES" { fileinto "Junk"; stop; } This isn't firing. The .Junk folder exists under the user directories, but messages that have the X-Spam-Flag set are still going into INBOX. My personal Sieve rules are firing properly (now), so I know Sieve is operational. Just the global rule isn't being applied. If it helps, I set up my server according http://workaround.org/articles/ispmail-etch/ - but on a Ubuntu Gutsy server with only a few minor deviations from that article. My protocol lda section of dovecot.conf has this: log_path = /home/vmail/dovecot-deliver.log global_script_path = /home/vmail/globalsieverc I don't see any messages in dovecot-deliver.log that says there are problems with Sieve. The above rule is in /home/vmail/globalsieverc as mentioned here. This was working once - but when I had it going into the "spam" folder. I changed the folder name to match what ThunderBird sets up automagically for it's junk controls. But like I say, the directory does exist. So, I'm a little stumped. Any suggestions on where I can look to sort this out? If it helps, I've attached my dovecot conf (via dovecot -n) below. Thank you for your time! Shawn root@mail:~# dovecot -n # 1.0.5: /etc/dovecot/dovecot.conf log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/ssl/certs/dovecot.pem ssl_key_file: /etc/ssl/private/dovecot.pem login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login mail_extra_groups: mail mail_location: maildir:/home/vmail/%d/%n mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv auth default: mechanisms: plain login passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf userdb: driver: passwd userdb: driver: static args: uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes socket: type: listen client: path: /var/spool/postfix/private/auth mode: 384 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vmail

3 4

[Dovecot] Procmail died with Signal 11
by Johannes Grimm 10 Apr '08

10 Apr '08

Hi to all out there, i know this is not the right mailinglist for this issue, but i?m hoping to get maybe here an answer to my problem. i have succesfully migrated 12.000 mailboxes on a debaian with washington imap to maildir on sles10 with dovecot. although i had some post-converting work to do, i can say that almost everything went fine. but there is one problem with my LDA. When postfix is about to deliver a lot of mail (user-db is ldap) procmail dies with signal 11. here is the error log: Apr 3 08:19:17 mailvirtuell postfix/local[22367]: E42EF33A96: to=<root(a)fh-rosenheim.de>, relay=local, delay=17, delays=0.08/0.11/0/17, dsn=5.3.0, status=bounced (Command died with signal 11: "IFS=` `&& exec /usr/bin/procmail || exit 75 #Ja". Command output: procmail: Exceeded LINEBUF ) I googled the whole inet for this problem and found a lot, but no solution seems to fit my problem. most articles point on this parameter for procmailrc "Linebuf". i found out that the default value is 2048k for message header reading. i doubled this value, with no effect. but i guess that a 4kb message header space must be enough to deal with. one hint last: starting value for ldap timeout was 10 secs. with this value the log went crazy like the above log-snip. i changed the timeout to 300 secs and thougt that was the trick, but there are still some process wich are diying after all. i?m using postfix 2.5.1, procmail 3.22, dovecot 1.0.13, with sophos and amavis. i would be really grateful for any ideas. best regards Johannes Grimm -- ============================================================== Hochschule für angewandte Wissenschaften - Fachhochschule Rosenheim University of Applied Sciences Rechenzentrum Johannes Grimm Hochschulstr.1 D-83024 Rosenheim Tel: +49-8031/805-229 Fax: +49-8031/805-223 http://www.fh-rosenheim.de/ johannes.grimm(a)fh-rosenheim.de ==============================================================

2 2

Re: [Dovecot] GETQUOTAROOT?
by Leonor F. Martins 10 Apr '08

10 Apr '08

Thank you for your message. I will be out of the office on Wednesday, April 9. If your message is urgent, please contact the Wellesley College HelpDesk at 781-283-3333. Leonor F. Martins Systems and Network Manager Wellesley College 106 Central Street Wellesley, MA 02481 Phone: 781.283.2886 E-mail: lmartins(a)wellesley.edu

1 0

Re: [Dovecot] Sieve Frustrations
by Leonor F. Martins 10 Apr '08

10 Apr '08

Thank you for your message. I will be out of the office on Wednesday, April 9. If your message is urgent, please contact the Wellesley College HelpDesk at 781-283-3333. Leonor F. Martins Systems and Network Manager Wellesley College 106 Central Street Wellesley, MA 02481 Phone: 781.283.2886 E-mail: lmartins(a)wellesley.edu

1 0

[Dovecot] Delete old mails and refresh quota
by Nicolas Letellier 09 Apr '08

09 Apr '08

Hello. I use dovecot 1.0.13. So, I can't use expire plugin (require dovecot 1.1+). For delete old mails in Junk mailboxe, I use a cron: find /var/mail/vmails/ -regex '.*Junk/cur/.*' -ctime +30 -delete It works. However, quota is not refreshed. If my quota is to 90% and I delete 85% of my mails, quota still 90%, not 5%. I must delete my maildirsize after this cron. Do you have another solution to actualisize my maildirsize after a delete of mail? Thanks! - Nicolas.

1 0

Re: [Dovecot] Newbie Sieve Problems
by Leonor F. Martins 09 Apr '08

09 Apr '08

Thank you for your message. I will be out of the office on Wednesday, April 9. If your message is urgent, please contact the Wellesley College HelpDesk at 781-283-3333. Leonor F. Martins Systems and Network Manager Wellesley College 106 Central Street Wellesley, MA 02481 Phone: 781.283.2886 E-mail: lmartins(a)wellesley.edu

1 0

[Dovecot] Newbie Sieve Problems
by Shawn 09 Apr '08

09 Apr '08

I had a nice long email written out describing my problem in detail. Between that, the list archives, and double-checking before posting, I'm happy to say my issue seems to be fixed. How's that for service from a mailing list? Helped me fix a problem before I have ever posted to it (this is my first post to this list). The issue was a faulty rule. Using a redirect to a folder rather than a fileinto. Guess it was still sorta valid though cuz I did run it through a sieve rule checker. Thanks list! Shawn

1 0

[Dovecot] temporary disable account
by Lampa 08 Apr '08

08 Apr '08

Hello, is there some way how to disable temporarily account or access to files. I need to backup with tar, but there is problem when tar is reading and some file changed (with --ignore-failed-read it continues but archive is not created and without --ignore-failed-read it fails). Some accounts are huge ;( Need something like qmail sticky bit or world writable directory - qmail is not delivering when one of above conditions hits. Thank you for helping me. -- Lampa

5 8

[Dovecot] Plugin trash does not work
by Nicolas Letellier 08 Apr '08

08 Apr '08

Hi. I use dovecot 1.0.13 on FreeBSD 7.0. I want my Junk mail will be deleted if my quota is exceeded. So, I configured trash plugin (with Dovecot wiki). In my dovecot.conf: protocol imap { mail_plugins = quota trash } plugin { trash = /usr/local/etc/dovecot-trash.conf } In my /usr/local/etc/dovecot-trash.conf: 1 Junk 2 Trash Emails in there mailboxes are never deleted. My mailbox is like this: .Junk dovecot-uidlist dovecot.index.log.2 tmp .Trash dovecot.index maildirsize cur dovecot.index.cache new dovecot-keywords dovecot.index.log subscriptions I want my .Junk directory be emptied when quota is exceeded. May i forgot something? Could you help me? Thanks very much! - Nicolas.

1 0