- dovecot - dovecot.org

Re: [Dovecot] dovecot sieve notify example?
by Thanh Han The 12 Sep '07

12 Sep '07

Hi, On Tue, Sep 11, 2007 at 10:47:10PM +0300, Uldis Pakuls wrote: > you can expand it using variables: > > sample: > ----------- > # Imagine the header > if address :matches ["From"] ["*"] { > # ${1} is the matching address > keep; > notify :method "mailto" :options ["${1}"] :message "Thank you, your message has been received." ; > } else { > # Control wouldn't reach this block, any match was successful > } > ----------- > > see: http://www.ietf.org/internet-drafts/draft-ietf-sieve-variables-08.txt I installed the latest sieve plugin (1.0.2) but it seems that the "variables" extension is not supported yet. When I say ,-------- | require ["fileinto", "variables"]; `-------- then I get the error: ,-------- | sieve parse error: line 1: Unsupported features in require line `-------- If I leave variables out, sieve doesn't complain but the variable is not expanded and I got ,-------- | sent notification to <${1}> (method=mailto) `-------- Any hint please? Thanks, Thanh

1 0

[Dovecot] [Debian] Sarge packages for dovecot 1.0.5 available
by Brian T Glenn 12 Sep '07

12 Sep '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 On Sun, Sep 09, 2007 at 07:21:26AM +0300, Timo Sirainen may have written: > http://dovecot.org/releases/1.0/dovecot-1.0.5.tar.gz > http://dovecot.org/releases/1.0/dovecot-1.0.5.tar.gz.sig Packages dovecot-common, dovecot-pop3d, and dovecot-imapd are available from the delink.net repository. Add the following line to /etc/apt/sources.list: deb http://debian.delink.net/ sarge-delink main Any problems with the package should be reported to me offlist. Just remove the tag from the left hand side of my email address above. Thanks, Brian - -- http://www.delink.net/ -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (GNU/Linux) iD8DBQFG5w5vFy/L+4MovqIRApgfAKCSbqHNTZYHArAJNhRb9ZIc0fXm1ACfZLJ9 QNA9XIqzFEGi8tpxCX9mNjU= =APhD -----END PGP SIGNATURE-----

1 0

[Dovecot] still having problems with deliver , quota , mysql
by Osvaldo Alvarez Pozo 12 Sep '07

12 Sep '07

Hi I have problems with deliver? I can not make it work with mysql. I mean I can write over the space declared on mysql. does any have a way of setting up deliver to read quota from mysql??? Thanks

2 1

Re: [Dovecot] dovecot sieve notify example?
by Thanh Han The 11 Sep '07

11 Sep '07

sorry for the noise, I found the answer: http://article.gmane.org/gmane.mail.imap.dovecot/20813/match Thanh On Tue, Sep 11, 2007 at 02:06:06PM +0200, The Thanh Han wrote: > Dear list, > > I was trying to use the "notify" action with dovecot sieve > but I just couldn't get it work. The relevant lines look as follows: > > ,-------- > |require ["fileinto", "notyfy"]; > | if header :contains ["to", "cc"] ["userA(a)example.com", "userB(a)example.com"] { > | notify > | :method "mailto" > | :options "userC(a)example.com" > | :low > | :message "notification"; > | keep; > | stop; > | } > `-------- > > But I get in log file the error > > ,-------- > | Sep 11 10:51:25 host30 deliver(abc(a)example.com): sieve runtime error: Notify: Generic Error > `-------- > > Can someone please give me a hint what I did wrong, or give > an example how a sieve notify action should look like? > > I appended my configuration below, in case it matters. I am > running linux debian etch, and use the postfix/dovecot packages > from debian repository. > > Thanks for your consideration, > Thanh > > Output from 'dovecot -n': > ,-------- > | ssl_listen: *:993 > | ssl_ca_file: /etc/ssl/certs/cacert.pem > | ssl_cert_file: /etc/ssl/certs/cert.pem > | ssl_key_file: /etc/ssl/private/key.pem > | disable_plaintext_auth: no > | login_dir: /var/run/dovecot/login > | login_executable: /usr/lib/dovecot/imap-login > | mail_extra_groups: mail > | mail_location: maildir:/var/mail/vmail/%n > | auth default: > | user: nobody > | passdb: > | driver: ldap > | args: /etc/dovecot/dovecot-ldap.conf > | userdb: > | driver: static > | args: uid=520 gid=520 home=/var/mail/vmail/%n allow_all_users=yes > | socket: > | type: listen > | client: > | path: /var/spool/postfix/private/auth > | mode: 432 > | user: postfix > | group: postfix > | master: > | path: /var/run/dovecot/auth-master > | mode: 384 > | user: vmail > `-------- > > dovecot-ldap.conf: > ,-------- > | hosts = 192.168.100.20:389 > | ldap_version = 3 > | base = ou=People,dc=example,dc=com > | deref = never > | scope = onelevel > | auth_bind = yes > | auth_bind_userdn = uid=%n,ou=People,dc=example,dc=com > `--------

2 1

[Dovecot] Disconnected: Shutting down:
by Frank Elsner 11 Sep '07

11 Sep '07

Hello, dovecot-1.0.3 on Fedora 6 works perfect in general but sometimes the system becomes unresponsive and the log file shows tons of messages like this: ... imap-login: Disconnected: Shutting down: 127.0.0.1, secured ... pop3-login: Disconnected: Shutting down: aa.bb.cc.dd Restarting dovecot helps, but what's behind? What can I do to prevent this? dovecot -n output: # 1.0.3: /usr/local/dovecot/etc/dovecot.conf base_dir: /var/run/dovecot/ protocols: imap imaps pop3 pop3s ssl_cert_file: /usr/local/dovecot/etc/mailbox.pem ssl_key_file: /usr/local/dovecot/etc/mailbox.key disable_plaintext_auth: no login_dir: /var/run/dovecot//login login_executable(default): /usr/local/dovecot/libexec/dovecot/imap-login login_executable(imap): /usr/local/dovecot/libexec/dovecot/imap-login login_executable(pop3): /usr/local/dovecot/libexec/dovecot/pop3-login login_greeting: TU-Berlin.DE POP3-/IMAP Service ready login_log_format_elements: %u %r %c login_processes_count: 20 verbose_proctitle: yes mail_location: maildir:/var/Mail/Boxes/%1u/%u mailbox_idle_check_interval: 15 maildir_copy_with_hardlinks: yes maildir_copy_preserve_filename: yes mail_executable(default): /usr/local/dovecot/libexec/dovecot/imap mail_executable(imap): /usr/local/dovecot/libexec/dovecot/imap mail_executable(pop3): /usr/local/dovecot/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): quota mail_plugin_dir(default): /usr/local/dovecot/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/dovecot/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/dovecot/lib/dovecot/pop3 mail_log_prefix: %Ls(%u): imap_client_workarounds(default): delay-newmail outlook-idle netscape-eoh tb-ext ra-mailbox-sep imap_client_workarounds(imap): delay-newmail outlook-idle netscape-eoh tb-extra- mailbox-sep imap_client_workarounds(pop3): outlook-idle pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xu%08Xv pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: mechanisms: plain login anonymous count: 20 passdb: driver: ldap args: /usr/local/dovecot/etc/dovecot-ldap.conf userdb: driver: static args: uid=777 gid=12 plugin: quota: maildir:ignore=Trash Best regards ______________________________________________________________ Frank Elsner / c/o Technische Universitaet Berlin | ____________/ tubIT [BD], Sekr. E-N 50 | | Einsteinufer 17 | | Phone: +49 30 314 23897 D-10587 Berlin | | eMail: Frank.Elsner(a)TU-Berlin.DE Germany __________________| |_________________________________________________________| in dubio pro exim

1 1

[Dovecot] dovecot sieve notify example?
by Thanh Han The 11 Sep '07

11 Sep '07

Dear list, I was trying to use the "notify" action with dovecot sieve but I just couldn't get it work. The relevant lines look as follows: ,-------- |require ["fileinto", "notyfy"]; | if header :contains ["to", "cc"] ["userA(a)example.com", "userB(a)example.com"] { | notify | :method "mailto" | :options "userC(a)example.com" | :low | :message "notification"; | keep; | stop; | } `-------- But I get in log file the error ,-------- | Sep 11 10:51:25 host30 deliver(abc(a)example.com): sieve runtime error: Notify: Generic Error `-------- Can someone please give me a hint what I did wrong, or give an example how a sieve notify action should look like? I appended my configuration below, in case it matters. I am running linux debian etch, and use the postfix/dovecot packages from debian repository. Thanks for your consideration, Thanh Output from 'dovecot -n': ,-------- | ssl_listen: *:993 | ssl_ca_file: /etc/ssl/certs/cacert.pem | ssl_cert_file: /etc/ssl/certs/cert.pem | ssl_key_file: /etc/ssl/private/key.pem | disable_plaintext_auth: no | login_dir: /var/run/dovecot/login | login_executable: /usr/lib/dovecot/imap-login | mail_extra_groups: mail | mail_location: maildir:/var/mail/vmail/%n | auth default: | user: nobody | passdb: | driver: ldap | args: /etc/dovecot/dovecot-ldap.conf | userdb: | driver: static | args: uid=520 gid=520 home=/var/mail/vmail/%n allow_all_users=yes | socket: | type: listen | client: | path: /var/spool/postfix/private/auth | mode: 432 | user: postfix | group: postfix | master: | path: /var/run/dovecot/auth-master | mode: 384 | user: vmail `-------- dovecot-ldap.conf: ,-------- | hosts = 192.168.100.20:389 | ldap_version = 3 | base = ou=People,dc=example,dc=com | deref = never | scope = onelevel | auth_bind = yes | auth_bind_userdn = uid=%n,ou=People,dc=example,dc=com `--------

1 0

[Dovecot] Deliver parameter problem
by Umut Arus 11 Sep '07

11 Sep '07

Hello, I'm using dovecot-1.0.5 with postfix. I have to use deliver from procmail because I have some filters. There is no document about how to using deliver parameters (-d) other than http://wiki.dovecot.org/LDA . If I set -d parameters manually as a username everything is ok. I can not set users' mail quota (don't lookup) with mysql db if I haven't set -d parameter as receipt username in procmail. How can I describe user (-d) parameter's variable in procmail? Procmail configuration, :0 | /usr/local/dovecot/libexec/dovecot/deliver -f $blabla -d $blabla2 Output of the configuration, # 1.0.5: /usr/local/dovecot/etc/dovecot.conf protocols: imap imaps pop3 pop3s listen: 10.1.1.168 ssl_cert_file: /usr/local/dovecot/etc/dovecot.cert.pem ssl_key_file: /usr/local/dovecot/etc/dovecot.key.pem disable_plaintext_auth: no login_dir: /usr/local/dovecot/var/run/dovecot/login login_executable(default): /usr/local/dovecot/libexec/dovecot/imap-login login_executable(imap): /usr/local/dovecot/libexec/dovecot/imap-login login_executable(pop3): /usr/local/dovecot/libexec/dovecot/pop3-login mail_location: maildir:%h/Maildir:INDEX=/var/no-quotas/index/%u:CONTROL=/var/no-quotas/control/%u mail_debug: yes mail_full_filesystem_access: yes mail_executable(default): /usr/local/dovecot/libexec/dovecot/imap mail_executable(imap): /usr/local/dovecot/libexec/dovecot/imap mail_executable(pop3): /usr/local/dovecot/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota mail_plugins(imap): quota imap_quota mail_plugins(pop3): mail_plugin_dir(default): /usr/local/dovecot/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/dovecot/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/dovecot/lib/dovecot/pop3 pop3_uidl_format(default): pop3_uidl_format(imap): pop3_uidl_format(pop3): %08Xv%08Xu namespace: type: private separator: / location: maildir:~/Maildir:INDEX=/var/no-quotas/index/%u:CONTROL=/var/no-quotas/control/%u inbox: yes namespace: type: private separator: / prefix: mail/ location: maildir:~/Maildir/.mail:INDEX=/var/no-quotas/index/%u:CONTROL=/var/no-quotas/control/%u auth default: verbose: yes debug: yes passdb: driver: pam userdb: driver: sql args: /usr/local/dovecot/etc/dovecot-sql.conf userdb: driver: prefetch socket: type: listen master: path: /var/run/dovecot/auth-master mode: 438 plugin: quota: maildir:storage=500000:ignore=trash regards,

1 0

[Dovecot] Does the list work?
by Osvaldo Alvarez Pozo 11 Sep '07

11 Sep '07

Hi all Does the list work? I have sent two mail without answer up today. I want to change Courrier-imap by dovecot but i have problems with quota and sieve in dovecot. would you help validating dovecot? I this does not work i would have to stay with courier-imap. This is the mail I sent before. Hi Well my problem is with quota it is not taken into account by deliver i compiled dovecot from sorces and the resault is the same. thoses are my files: File /etc/dovecot/dovecot.conf ssl_cert_file = /etc/apache2/ssl/server.crt ssl_key_file = /etc/apache2/ssl/server.key #ssl_ca_file = /etc/pki/dovecot/certs/ca-bundle.crt protocols = imap pop3 imaps pop3s log_timestamp = "%Y-%m-%d %H:%M:%S " #mail_location = maildir:/export/mail/%d/%u mail_location = maildir:/var/vmail/%d/%u/Maildir mail_extra_groups = mail first_valid_uid = 5000 last_valid_uid = 5000 maildir_copy_with_hardlinks = yes disable_plaintext_auth = no protocol imap { mail_plugins = quota imap_quota imap_client_workarounds = outlook-idle delay-newmail } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh protocol lda { postmaster_address = postmaster(a)example.com mail_plugins = quota log_path = /var/log/dovecot-deliver.log info_log_path = /var/log/dovecot-deliver.log mail_plugins = cmusieve # sieve_global_dir = /etc/dovecot/sieve/ global_script_path =/etc/dovecot/sieve/dovecot.sieve } auth default { # Having "login" also as a mechanism make sure outlook can use the auth smtpd as well # http://wiki.dovecot.org/Authentication/Mechanisms mechanisms = plain login passdb sql { args = /etc/dovecot/sql.conf } userdb sql { args = /etc/dovecot/sql.conf } userdb prefetch { } user = nobody socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = vmail group = mail } client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = mail } } } dict { } plugin { quota = maildir:storage=10240:messages=1000 acl = vfile:/etc/dovecot/acls trash = /etc/dovecot/trash.conf } file /etc/dovecot/sql.conf driver = mysql default_pass_scheme = MD5 connect = host=localhost dbname=postfix user=postfix password=password user_query = SELECT concat('/var/vmail/', maildir, 'Maildir') as home, concat('maildir:/var/vmail/', maildir, 'Maildir') as mail, 5000 AS uid, 8 AS gid, concat('maildir:storage=', floor(quota/1024)) AS quota FROM mailbox WHERE username = '%u' AND active = '1' password_query = SELECT username as user, password, concat('/var/vmail/', maildir, 'Maildir') as userdb_home, concat('maildir:/var/vmail/', maildir, 'Maildir') as userdb_mail, 5000 as userdb_uid, 12 as userdb_gid FROM mailbox WHERE username = '%u' AND active = '1' Thanks Thanks in advance

2 5

[Dovecot] postfix + dspam + dovecot problem
by Lars Stavholm 11 Sep '07

11 Sep '07

Hi All, I'm new to dovecot (coming from cyrus) and have a bit of a problem setting up postfix + dspam + dovecot. 1. postfix + dovecot: works like a charm. Using "mailbox_command = /usr/lib/dovecot/deliver" in postfix main.cf 2. adding dspam to the equation: unable to deliver: net_connect(/usr/var/run/dovecot/auth-master) failed: No such file or directory Using "mailbox_transport = lmtp:unix:/var/tmp/dspam.sock" in postfix main.cf (instead of the above mailbox_command), and the corresponding setting in master.cf. In /etc/dspam.conf I'm using... TrustedDeliveryAgent "/usr/lib/dovecot/deliver" And here's the full error message: Sep 11 02:10:38 nwinnie postfix/pickup[18313]: 090F1C042: uid=0 from=<root> Sep 11 02:10:38 nwinnie postfix/cleanup[7010]: 090F1C042: message-id=<20070911001038.090F1C042(a)nwinnie.telcotec.se> Sep 11 02:10:38 nwinnie postfix/qmgr[18318]: 090F1C042: from=<root(a)nwinnie.telcotec.se>, size=431, nrcpt=1 (queue active) Sep 11 02:10:38 nwinnie deliver(stava(a)nwinnie.telcotec.se): net_connect(/usr/var/run/dovecot/auth-master) failed: No such file or directory Sep 11 02:10:38 nwinnie dspam[10379]: Delivery agent returned exit code 75: /usr/lib/dovecot/deliver -d stava(a)nwinnie.telcotec.se Sep 11 02:10:38 nwinnie postfix/lmtp[7018]: 090F1C042: to=<stava(a)nwinnie.telcotec.se>, orig_to=<stava>, relay=nwinnie.telcotec.se[/var/tmp/dspam.sock], delay=0.35, delays=0.32/0.01/0.01/0.01, dsn=4.3.0, status=deferred (host nwinnie.telcotec.se[/var/tmp/dspam.sock] said: 421 4.3.0 <stava(a)nwinnie.telcotec.se> Delivered (in reply to end of DATA command)) So, postfix hands the message to dspam, dspam does its thing, dspam tries to deliver and fails. What throws me is that the delivery works as expected in case 1) but not in case 2), despite the fact I'm using the same delivery agent, i.e. /usr/lib/dovecot/deliver. Why would dovecot go for some other authentication method in case 2)? BTW, we're using PAM on top of LDAP. Any ideas appreciated. Cheers /Lars

2 3

[Dovecot] Write-only mailboxes
by Steffen Kaiser 11 Sep '07

11 Sep '07

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, I've setup a mailbox for reporting SPAM by simply symlinking it into the Maildir of selected users. In order to preserve anonymity of the users I setup the mailbox as follows: drwxr-xr-t 5 root fb 4096 2007-09-05 16:18 ./ drwxr-xr-x 7 root root 4096 2007-09-05 16:16 ../ drwx-wx-wt 2 spamd fb 12288 2007-09-10 16:17 cur/ hence, with read permission for the spam bot only. When Thunderbird copies mails from the same mail account into the folder, it seems like it tries to select the mail box afterwards, then a "Internal error occured. Refer to server log for more information." because of permission denied. When one copies mail from yet another account into the SPAM box, no such message appears. I guess, Thunderbird does not try the refresh the message count. Well, is there a possiblity to setup a Write-Only mailbox, with Dovecot v1.0.3 with the ACL plugin? Is there a working setup for write-only mailboxes with the ACL plugin? Bye, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.6 (GNU/Linux) iQEVAwUBRuVWAi9SORjhbDpvAQLJEQgApVcJ/YdyMBvVHC+saU+kZWaWVLba7lGT gkSOqFqXhOMBVdSfUPke4G/KPaCPaCVCLW+YO+LCLO/qqL9ZWlAv3pEj9nDXhTEQ AVJgVW6SnucGFzqNVV4uXWr8A6nVfwKfs9TH66JH5s/iOKKe4kGtAwf05+DPT5iY hDQ6CRXJY5hD4XuBAW5iqnvqo7IaoOH9KwvPanQiqCwYVQTjf0JHzn6XwZt+J7Bo mKxIDTm0wTpy6l6l4E3qzhBXJoDYlxOHe57/CAgEAddu04ovJR6lxrwxorEs8VAC PwiiPuRGMlW1XnztiMWvpYB8LVhykhtG7RuZJEoeyQDnTz+a2JHRBA== =LSa2 -----END PGP SIGNATURE-----

2 1