- dovecot - dovecot.org

[Dovecot] Quota handling - opportunity for new Feature?
by Charles Marcus 23 May '07

23 May '07

This initial proposal for a Feature Request is the result of my desire to implement quotas, but not have the attendant headaches that inevitably accompany its implementation. Ralf Hildebrandt wrote: > I have to face it, my users are retards: Is there any other kind of user? ;) <snip> > Thus I need a feature in dovecot that will tell them via email: > > Level1: "You ALMOST exceeded your quota, you're at 90% now" > Level2: "You're very close to exceededin your quota, you're at 95% > now" > Level3: "Would you please clean up now? You're at 99% now" What I'd *really* like to see implemented is something along the lines outlined below - but of course, this will depend entirely on whether or not Timo thinks it is doable - or desirable... I know this would only be applicable if also using the dovecot LDA, because what I want to do requires cooperation at both the deliver and pop/imap ends... 1. Have two 'special' user-specific folders (by special, I mean like the Drafts, Sent, Templates folders) that dovecot controls: a) one, that the user has read-only access to and shows up in his folders list, that is used only for system-related messages, like over-quota notices - and maybe even user-specific log-type errors could be delivered here? b) and one (hidden) that the user does *not* have access to, to temporarily hold messages that come in that are unable to be delivered due to an over-quota condition 2. When user is over quota, have LDA deliver to folder b (yes, accept the message for delivery from the sending mta), and then generate an over-quota message that is delivered to folder a. Optionally, a bounce could be generated to the sender, informing them that their message is being 'held in queue' or something to that effect, due to the recipient being over-quota. 3. Once the user deletes enough mail to come back under quota, dovecot would then move messages from the 'over-quota' folder to his Inbox. Ok, am willing to hear reasons how/why this is a terrible idea... :) -- Best regards, Charles Marcus I.T. Director Media Brokers International 678.514.6200 x224 678.514.6299 fax

2 5

[Dovecot] dovecot.pid
by Dehnert James Sr 23 May '07

23 May '07

Can I define where dovecot.pid should be in the config file on 1.0.0? Nothing is being written to /var/run/dovecot, even after I changed the ownership to dovecot. Thanks, Zeke -- James "Zeke" Dehnert mailto:jdehnert@norcalnetworks.com Phone: +1 707.546.6620 x602 Fax: +1 707.324.8043 "Life is racing, everything else is just waiting"

2 1

[Dovecot] dovecot.org moves to a new server
by Timo Sirainen 23 May '07

23 May '07

Parts of dovecot.org will be down for a few hours while I'm moving to a new server (and to a new ISP as well). The new server won't be virtual anymore, so I'm hoping to get a bit better performance from it as well (the old virtual server had some disk I/O hogs). The DNS records have been using 1 hour TTL for last few days, so this move should be fast for everyone. Thanks to Nebula for hosting dovecot.org for the last 7 months. So, beginning the move by shutting down Postfix and Mailman..

4 6

[Dovecot] newbie with dovecot acls needs a little help :-)
by Rachid Zarouali 22 May '07

22 May '07

hy all, i'm trying to make an acl so a local unix user 'sie' can access exalead mboxes. my exalead mboxes are stored in : /opt/exalead/mail/sie/ mailboxes are automatically created every week like sie.2007.W17 for the 17th week of the year. how can i do this ? i've tried several things but none succedded. dovecot version 1.0.rc15 # /etc/dovecot.conf ddIEffective uid=65534, gid=65534 ddILoading modules from directory: /usr/lib64/dovecot/imap ddIModule loaded: /usr/lib64/dovecot/imap/lib01_acl_plugin.so log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot-info.log protocols: imap imaps login_dir: /var/run/dovecot/login login_executable: /usr/libexec/dovecot/imap-login login_greeting_capability: yes mail_extra_groups: exalead mail_location: mbox:/opt/exalead/mail mail_debug: yes mail_plugins: acl auth default: verbose: yes debug: yes passdb: driver: pam userdb: driver: passwd userdb: driver: prefetch socket: type: listen client: master: path: /var/run/dovecot/auth-master mode: 384 user: exalead group: exalead thanks for your help -- Rachid Zarouali Administrateur Systèmes/Applications AFNIC rachid.zarouali(a)nic.fr 01.39.30.83.47

2 2

[Dovecot] simultaneous access to folder
by David Lee 22 May '07

22 May '07

We have for many years been a UW-IMAP site, with users having their own traditional, private, mbox-format INBOX and folders: almost (but not quite) no complications of shared or simultaneous access. We have just completed a transparent transition to dovecot (official 1.0.0 release). But we have one residual issue affecting one important user account. UW-IMAP specifically only allows single access to "mbox" folders. If different IMAP connections are attempted to such a folder, the latest attempt kills off earlier connections. (That's just the way it works, which was mostly fine for us.) On this particular account we had explicitly set two folders to UW-IMAP's different "mbx" format, so that a group of staff could simultaneously access that folder and delete messages. This is by a single, common, id/pw account. But dovecot doesn't support "mbx" format. Is there a way for us to set up such a group-access folder under dovecot? I've checked wiki pages such as "http://wiki.dovecot.org/SharedMailboxes" but that doesn't seem to be clear on the particular matter of which formats are suitable for such simultaneous access. It talks about different users accessing a folder; in our case it is multiple instances of the the same user. Under dovecot, can we simply let it be "mbox" format? And can dovecot (unlike UW-IMAP) then handle the simultaneous access? [Background: this is just two folders (amongst many) on one username; the overall service successfully handles over 15,000 usernames. And the solution (work-around) will only need to last a few months until that whole account is Exchange-ified (but let's not digress...!)] If I've missed something on the wiki which addresses this matter, point me in the right direction... -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : UNIX Team Leader Durham University : : South Road : : http://www.dur.ac.uk/t.d.lee/ Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. :

2 1

[Dovecot] [PATCH] add some const's
by Andrey Panin 22 May '07

22 May '07

Add some const's. I think patch is self-explaining :) -- Andrey Panin | Linux and UNIX system administrator pazke(a)donpac.ru | PGP key: wwwkeys.pgp.net

2 1

Re: [Dovecot] No authentication sockets found
by Stewart Dean 22 May '07

22 May '07

Back on 5/9, I made a post by this subject http://dovecot.org/list/dovecot/2007-May/022482.html Timo replied: > The error message means that /var/run/dovecot/login directory or its > contents was deleted while Dovecot was running. I'd guess that you start > Dovecot too early and after startup another script goes and deletes the > entire /var/run/ directory. Or maybe that's done in background. Or > something.. and funkypunkydrunky reported: > I have lived the same problem in my system. But not evrytime sometimes it > only happens when i restart dovecot while mta is working. I think postfix > (my mta) cannot connect the new authentication socket. If i need the > restarting dovecot, i restart postfix too. It happens only for the above > situation. This happened again under these circumstances: 1) The machine had been up for 5 days. Having made some changes (largely de-verbosifying the dovecot.conf file), I killed the master dovecot process and restarted it (this before I was informed I could just do a kill -1 to effect the same result with less trouble). > May 14 15:34:09 mercury mail:info dovecot: Dovecot v1.0.0 starting up > > 2) Using TBird a an imap client, I got back on > May 14 15:24:48 mercury mail:info dovecot: auth(default): client out: CONT 1 > May 14 15:24:48 mercury mail:info dovecot: auth(default): client in: CONT 1 AHNkZWFuAEFsYW1hcjJi > May 14 15:24:48 mercury mail:info dovecot: auth(default): pam(sdean,10.20.10.75): lookup service=dovecot > May 14 15:24:49 mercury mail:info sendmail-SndRcv[2220248]: l4EJOief2949348: to=<cooper(a)bard.edu>, delay=00:00:01, xdelay=00:00:01, mailer=local, pri=36928, dsn=2.0.0, stat=Sent > May 14 15:24:49 mercury mail:info dovecot: auth(default): client out: OK 1 user=sdean > May 14 15:24:49 mercury mail:info dovecot: auth(default): master in: REQUEST 6 909440 1 > May 14 15:24:49 mercury mail:info dovecot: auth(default): passwd(sdean,10.20.10.75): lookup > May 14 15:24:49 mercury mail:info dovecot: auth(default): master out: USER 6 sdean system_user=sdean uid=202 gid=200 home=/home/hcrc/sdean > May 14 15:24:49 mercury mail:info dovecot: imap-login: Login: user=<sdean>, method=PLAIN, rip=10.20.10.75, lip=192.246.229.21, TLS > May 14 15:24:49 mercury mail:info dovecot: IMAP(sdean): Effective uid=202, gid=200, home=/home/hcrc/sdean > May 14 15:24:49 mercury mail:info dovecot: IMAP(sdean): mbox: data=/home/hcrc/sdean/mail:INBOX=/var/spool/mail/sdean:INDEX=/var/dcndx/sdean > May 14 15:24:49 mercury mail:info dovecot: IMAP(sdean): mbox: root=/home/hcrc/sdean/mail, index=/var/dcndx/sdean, inbox=/var/spool/mail/sdean > > > 3) 15 seconds after that, I started seeing a slew of these error messages, every 15 seconds or so: > May 14 15:25:03 mercury mail:info imapd[2052334]: Logout user=ot119 host=[10.20.10.10] > May 14 15:25:04 mercury mail:err|error dovecot: imap-login: No authentication sockets found > May 14 15:25:04 mercury mail:err|error dovecot: child 835676 (login) returned error 89 > 4) Since this is the production server, I kill the master dovecot instance and reinvoke dovecot in the foreground. I haven't seen the problem again since....but twice is problematic with just 3 people using DC. Now. My thoughts about what has been suggested so far, first by Timo: 1) This machine had been booted 5 days before so it's not a boot related problem 2) I'd find it hard to believe that something is nuking the contents of /var/run because: a) The directory doesn't exist by default in AIX; I created it for the DC install b) I have cron jobs that do cleanup with /var/log, /var/log/arc and /var/spool/mqueue, but nothing that does anything to /var/run 3) /var/run is local to the DC host and is not exported 4) funkypunkydrunky's comments about interaction with the MTA (sendmail in my case) seem unlikely, since it doesn't use SSL...or the same ports My questions: 1) What is happening? This is OpenSSL related, yes? 2a) Will this affect my production UWIMAP (which also supports/utilizes SSL)? If it doesn't, I can take my time debugging it (given that there are only 3 IT guys using DC currently), instead of frantically shutting it up by rebooting ASAP. I /think/ previously established DC connections continued to work 2b) How will this affect other imaps DC nex and pre-extant connections? I'm thinking of putting the whole IT dept on DC, but it'd be good to know how flaky things would get if/when this happens again. 3) What can I do to debug it, given that it happens infrequently and of no known causation? What should I check and look for afterwards? I guess I could put a cronjob that checks that /var/run/dovecot/login/ default= and ssl-parameters.dat exists periodically ==== Stewart Dean, Unix System Admin, Henderson Computer Resources Center of Bard College, Annandale-on-Hudson, New York 12504 sdean(a)bard.edu voice: 845-758-7475, fax: 845-758-7035

3 5

[Dovecot] per user quota using LDAP entries
by Kenneth Oncinian 22 May '07

22 May '07

Hi List, This is my first post to this list so please be gentle :-). First of all, kudos to the developers of dovecot! Im trying to implement quota, and I followed the instructions in the wiki. My problem is the quota specified per user is not being honored, only the global quota setting. I do have an "quota = maildir:storage=204800" in the plugin area and enabled quota in the mail_plugins for both imap and pop3. This is my user attribute in /etc/dovecot-ldap.conf: user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid,mailQuota=quota wherein the "mailQuota" attribute has an entry of "mailQuota: maildir:storage=30720". So i was expecting of a 300MB quota for that user, but dovecot is using the global quota of 200MB instead of 300MB. My dovecot version is 1.0.0 My dovecot.conf: ----------------------- # /etc/dovecot.conf log_path: /var/log/dovecot.log protocols: imap pop3 login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login login_greeting_capability(default): yes login_greeting_capability(imap): yes login_greeting_capability(pop3): no mail_location: /var/mail/vhost/%u mail_debug: yes maildir_copy_with_hardlinks: yes maildir_copy_preserve_filename: yes mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugins(default): quota imap_quota trash mail_plugins(imap): quota imap_quota trash mail_plugins(pop3): quota mail_plugin_dir(default): /usr/lib/dovecot/imap mail_plugin_dir(imap): /usr/lib/dovecot/imap mail_plugin_dir(pop3): /usr/lib/dovecot/pop3 pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh auth default: verbose: yes debug: yes debug_passwords: yes passdb: driver: ldap args: /etc/dovecot-ldap.conf userdb: driver: passwd userdb: driver: ldap args: /etc/dovecot-ldap.conf userdb: driver: prefetch plugin: quota: maildir:storage=204800 trash: /etc/dovecot-trash.conf --- my dovecot-ldap.conf ------------------------------------------ hosts = localhost.localdomain dn = "cn=Directory Manager" dnpass = "xxxxxx" tls = no auth_bind = no ldap_version = 3 base = ou=people, dc=xx, dc=xx, dc=xx user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid,mailQuota=quota pass_attrs = uid=user,userPassword=password pass_filter = (&(objectClass=posixAccount)(uid=%u)) default_pass_scheme = LDAP-MD5 -------------- sample LDAP query: ------------------------------ ldapsearch -x -Z '(uid=kenneth.oncinian)' # LDAPv3 # base <> with scope sub # filter: (uid=kenneth.oncinian) # requesting: ALL # # kenneth.oncinian, People, ph.panasonic.com dn: uid=kenneth.oncinian,ou=People, dc=xx,dc=xx,dc=xx givenName: Kenneth sn: Oncinian telephoneNumber: xxx-xxxx loginShell: /bin/bash gidNumber: 2516 uidNumber: 1000 mail: kenneth.oncinian(a)xx.xx.xx facsimileTelephoneNumber: xxx xxxx objectClass: top objectClass: person objectClass: organizationalPerson objectClass: inetorgperson objectClass: posixAccount objectClass: account objectClass: mailgroup objectClass: mailgroupmanagement objectClass: mailgroupmanagement-globalconfig objectClass: mailgroupmember objectClass: mailrecipient objectClass: netscapemailserver objectClass: nsmailclient objectClass: ntuser objectClass: sambaSamAccount objectClass: proxyaccess objectClass: jabberaccess uid: kenneth.oncinian preferredLanguage: en cn: Kenneth Oncinian homeDirectory: /var/mail/vhost/kenneth.oncinian ou: Information Systems Department (ISD) x500UniqueIdentifier: mailAlternateAddress: koncinian(a)gmail.com ntUserDomainId: kenneth.oncinian ntUserCreateNewAccount: true ntUserDeleteAccount: true sambaSID: S-1-5-21-1685363153-499155089-1962420841-3000 sambaPrimaryGroupSID: S-1-5-21-1685363153-499155089-1962420841-3001 displayName: Kenneth Oncinian sambaPwdMustChange: 2147483647 sambaPasswordHistory: 00000000000000000000000000000000000000000000000000000000 00000000 sambaAcctFlags: [U ] myproxyaccess: yes myjabberaccess: yes sambaPwdCanChange: 1179303932 sambaLMPassword: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx sambaNTPassword: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx sambaPwdLastSet: 1179303932 mailQuota: maildir:storage=30720 # search result search: 3 result: 0 Success # numResponses: 2 # numEntries: 1 -- snip-- thanks and best regards, Kenneth

2 2

[Dovecot] Something about IMAP log
by Mu-Cheng Hsieh 22 May '07

22 May '07

Hi When the user used POP3 to handle her/his mailbox, we could know something happened as below. May 16 10:16:29 server dovecot: [ID 107833 local5.info] POP3(user): Disconnected: Logged out top=675/723063, retr=0/0, del=1/675, size=18124546 However, if the user used IMAP, we can not know what happened. May 18 15:25:42 server dovecot: [ID 107833 local5.info] IMAP(user): Disconnected: Logged out Is it possible to log something (e.g. delete or expunge) through IMAP? Thanks. -- Mu-Cheng Hsieh

2 1

Re: [Dovecot] Conflict -> Dovecot + Maildrop (maildirsize)
by Kenny Dail 21 May '07

21 May '07

> As I said in my original mail, this is simply a configuration issue: > > Looks like you're trying to tell the quota in bytes to Dovecot. Dovecot > wants it to be in kilobytes in its configuration file / userdb (it still > writes it in bytes to maildirsize, as you can see above it writes 1GB * > 1024 value in there). > > Where do you get the quota value for Dovecot? Divide it by 1024 and > it'll work right. I also use maildrop + dovecot. My quotas are stored in a mysql DB in couriers expected format: 50000000S (note the S on the end for storage). It makes for a very ugly userdb query trying to get that formatted to dovecot style of "maildir:storage=48828:ignore=Trash" How much would it take to allow dovecot's quota plugin to alternately accept "maildir:50000000S:ignore=Trash"? -- Kenny Dail <kend(a)amigo.net>

2 1