- dovecot - dovecot.org

[Dovecot] mysql authentication problems
by Pedro Vieira 28 Apr '06

28 Apr '06

Hello all.. I'm trying to configure dovecot do athenticate using mysql, but I?m having some troubles... After configuring the mysql athentication in dovecot-mysql.conf and in dovecot.conf, when I try to login I get this mesage in my logs: Dovecot-auth: MySQL: Can't connect to database dovecot: Can't connect to local MySQL server through socket '/var/tmp/mysql.sock' (2) Any ideia why this happens and how to fix it? Thanks in advance, Pedro

4 10

[Dovecot] imaptest, with options!
by Jens Laas 28 Apr '06

28 Apr '06

I hacked some command line options into imaptest. I dont think I broke it.. Place into dovecot-source root as usual and compile with: gcc imaptest.c -o imaptest -Wall -W -I. -Isrc/lib -DHAVE_CONFIG_H src/lib/liblib.a As per Timo's instructions. # imaptest -h imaptest [USER@IP:PORTNO] [pass=PASSWORD] [mbox=MBOX] [clients=CC] [msgs=NMSG] [use_authenticate] [PORTNO] USER = template for username. "u%04d" will generate users "u0001" to "u0100" MBOX = path to mbox from which we read mails to append. CC = number of concurrent clients. [20] NMSG = target number of messages in INBOX. [100] If use_authenticate is given AUTHENTICATE will be used instead of LOGIN. Have fun! Jens ----------------------------------------------------------------------- 'Old C programmers don't die ... they're just cast into void*' ----------------------------------------------------------------------- Jens Låås Email: jens.laas(a)data.slu.se Department of Computer Services, SLU Phone: +46 18 67 35 15 Vindbrovägen 1 P.O. Box 7079 S-750 07 Uppsala SWEDEN -----------------------------------------------------------------------

1 1

[Dovecot] IMAP & pop3 under /var/spool/mail
by Obantec Support 28 Apr '06

28 Apr '06

Hi is it possible to run both under /var/spool/mail and if so how do i tell my LDA to deliver to the correct format mbox or maildir Mark

1 0

RE: [Dovecot] being courier_imap compatible
by Bill Boebel 27 Apr '06

27 Apr '06

On Wed, April 26, 2006 16:12, "Chad Leigh -- Shire.Net LLC" <chad(a)shire.net> said: > OK, I am running (for many years now) an existing courier_imap maildir++ > setup with exim as the MTA. > I set up a namespace for dovecot, using the wiki as a guide, so: > > namespace private { > separator = . > prefix = INBOX. > location = . > inbox = yes > hidden=no > } > > However, clicking on the folder does not show any messages at all. > dovecot is not creating a subscription file inside the maildir > (Mail.app does not allow you to subscribe to folders -- it subscribes > to all existing folders for you) > > And if I try and create a new folder inside the account I get a > "CREATE" command failed, server error: unknown namespace This is what we're using and our Courier maildirs are able to work with Dovecot... default_mail_env = maildir:~/ namespace private { separator = . prefix = INBOX. inbox = no } namespace private { separator = . prefix = inbox = yes hidden = yes } Also, here are patches to make Dovecot use Courier's subscription file properly... --- src/lib-storage/index/maildir/maildir-storage.h: -#define SUBSCRIPTION_FILE_NAME "subscriptions" +#define SUBSCRIPTION_FILE_NAME "courierimapsubscribed" --- src/lib-storage/subscription-file/subscription-file.c @49 unsigned int i; // BB - added variable @55 /* BB - changed loop to skip over lines with just INBOX and remove INBOX. from the beginning of the line, for courier-imap compatibility */ for (i = 0;; i++) { while ((line = i_stream_next_line(input)) == NULL) { switch (i_stream_read(input)) { case -1: if (input->stream_errno != 0 && (input->stream_errno != ESTALE || !ignore_estale)) { subsfile_set_syscall_error(storage, "read()", path); *failed_r = TRUE; } return NULL; case -2: /* mailbox name too large */ mail_storage_set_critical(storage, "Subscription file %s contains lines longer " "than %u characters", path, MAX_MAILBOX_LENGTH); *failed_r = TRUE; return NULL; } } /* BB - remove INBOX. from the beginning of the line, for courier-imap compatibility */ if (strcmp(line, "INBOX") == 0) continue; if (strncmp(line, "INBOX.", 6) == 0) line += 6; break; } /* BB - end changes */ @147 /* BB - prepend INBOX. for courier-imap compatibility */ -if (o_stream_send_str(output, line) < 0 || +if (o_stream_send_str(output, "INBOX.") < 0 || + o_stream_send_str(output, line) < 0 || @150 -line = t_strconcat(name, "\n", NULL); +/* BB - prepend INBOX. for courier-imap compatibility */ +line = t_strconcat("INBOX.", name, "\n", NULL);

2 1

Re: [Dovecot] auth-request.c: assertion failed: (*name != '\0')
by Tom Sommer 27 Apr '06

27 Apr '06

On Thu, April 27, 2006 12:13, Simon Waters wrote: > On Thursday 27 Apr 2006 10:44, Tom Sommer wrote: > >> >> password_query = SELECT username as user, NULL as password FROM users >> WHERE username = '%u' AND password = PASSWORD('%w') >> >> >> as advised in a previous discussion in this list > > I'm confused here, in my Postgres config "password_query" returns; > > > select password from from users where userid='%u' > > Which seems more logical naming convention and still matches the PGSQL > documentation. I don't understand your question, obviously I edited my password_query, ref: http://dovecot.org/list/dovecot/2005-October/009695.html Regards -- Tom Sommer http://tomsommer.dk Regards -- Tom Sommer http://tomsommer.dk

1 0

[Dovecot] dovecot.rawlog
by Obantec Support 27 Apr '06

27 Apr '06

Hi Dovecot stable 1.0 on FC3 i enabled rawlog via the conf file and for 1 user all i see is in out files but 0B's 2 others i have added work as expected. Mark

1 0

[Dovecot] more LDA woes
by Alan Premselaar 27 Apr '06

27 Apr '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 OK. So, I got over some of the segfault problems I was having with dovecot 1.0beta7 and have even downloaded and installed the latest CVS version which is properly providing quota information to thunderbird (although Mail.app doesn't show the quota details) now i've also downloaded the CVS version of dovecot-LDA and have run autogen.sh and during the configure it gets stuck at: ... checking rxposix.h usability... no checking rxposix.h presence... no checking for rxposix.h... no configure: creating ./config.status config.status: creating Makefile and it's been sitting like that for over an hour now (I had to take care of some other things and just let it sit) i ran configure with the following: ./configure --with-dovecot=../dovecot (this is the directory for the CVS version of dovecot) any ideas? Alan -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFEUC4kE2gsBSKjZHQRAnrUAJ4oUbHFqqcLl7qxv6WE4FN94J9l4QCfSAOt odz/cQtZEsIMJR+IJ6qAggs= =GVpH -----END PGP SIGNATURE-----

1 0

[Dovecot] setuid(5000) failed: Resource temporarily unavailable
by Jon Baker 27 Apr '06

27 Apr '06

I have combed google for days searching for an answer to this but cannot find anything anywhere, I'm hoping that posting to this list will get me the solution. I have FC4 running dovecot v1.0.beta7 to serve my POP3 (I had to install v1.0.beta7 because it's on a x86_64 and I need mysql support). It runs great for about two hours, after which I start getting the resource temporarily unavailable error. I can't get the error to go away by restarting dovecot, the only way I can figure out to do it is to restart the box. This is terribly annoying... please help! Thanks!

2 2

Re: [Dovecot] being courier_imap compatible
by Chad Leigh -- Shire.Net LLC 26 Apr '06

26 Apr '06

On Apr 26, 2006, at 2:53 PM, Dean Blackburn wrote: > Apple Mail is, from IMAP's perspective, broken. It's impossible to > unsubscribe, which in turn makes troubleshooting like this a PITA. > > We use Apple Mail successfully onsite with Dovecot, but we did ALL > our client testing in Thunderbird, which gives (mostly) good error > messages. Once you have namespaces happy in Tbird, you can start > cycling through the (few) options that are tweakable in Mail until > it works without complaining (as much). What you really need is for dovecot to be able to log all incoming imap commands. However, I have log and debug stuff, everything that I can find, turned on, and I cannot get dovecot to dump the requests it is getting. Note that Apple Mail has no problems with courier Chad > > :) > > -deano > > > Chad Leigh -- Shire.Net LLC wrote: >> OK, I am running (for many years now) an existing courier_imap >> maildir++ setup with exim as the MTA. Has been fine. I have my >> own custom ldap schema for user account definition and authorization. >> >> I installed dovecot 1.0 beta 7 as a test and have it listening on >> a different port. I would like, if possible, to set things up so >> that a user could use either dovecot or courier. Having to re- >> subscribe to folders is OK when moving to dovecot. (It would be >> nice to be able to make a symbolic link from courier's >> subscription file to the dovecot one though) >> >> (My client for testing is the Mac OS X (10.4.6) Mail client >> Mail.app -- it seems to do an auto subscribe to folders) >> >> I set up a namespace for dovecot, using the wiki as a guide, so: >> >> namespace private { >> # Hierarchy separator to use. You should use the same separator >> for all >> # namespaces or some clients get confused. '/' is usually a >> good one. >> separator = . >> >> # Prefix required to access this namespace. This needs to be >> different for >> # all namespaces. For example "Public/". >> prefix = INBOX. >> >> # Physical location of the mailbox. This is in same format as >> # default_mail_env, which is also the default for it. >> location = . >> >> # There can be only one INBOX, and this setting defines which >> namespace >> # has it. >> inbox = yes >> >> # If namespace is hidden, it's not advertised to clients via >> NAMESPACE >> # extension or shown in LIST replies. This is mostly useful >> when converting >> # from another server with different namespaces which you want >> to depricate >> # but still keep working. For example you can create hidden >> namespaces with >> hidden=no >> } >> >> (location has to be . or something similar since my ldap schema is >> purely virtual users and returns the actual root of the maildir) >> >> I am able to get the root mailbox (INBOX) to work. I can see new >> mail and look at mail messages etc. >> >> I create a new account in Mail.app that logs in to an existing >> account (to make sure there is no client cached info involved). >> It logs in and is able to see the imap folders that exist for this >> account. >> >> However, clicking on the folder does not show any messages at >> all. dovecot is not creating a subscription file inside the >> maildir (Mail.app does not allow you to subscribe to folders -- it >> subscribes to all existing folders for you) >> >> And if I try and create a new folder inside the account I get a >> "CREATE" command failed, server error: unknown namespace >> >> How can I get the folders to work with dovecot using my existing >> maildir++ setup? >> >> Thanks >> Chad >> >> --- >> Chad Leigh -- Shire.Net LLC >> Your Web App and Email hosting provider >> chad at shire.net >> >> >> > --- Chad Leigh -- Shire.Net LLC Your Web App and Email hosting provider chad at shire.net

1 0

[Dovecot] being courier_imap compatible
by Chad Leigh -- Shire.Net LLC 26 Apr '06

26 Apr '06

OK, I am running (for many years now) an existing courier_imap maildir ++ setup with exim as the MTA. Has been fine. I have my own custom ldap schema for user account definition and authorization. I installed dovecot 1.0 beta 7 as a test and have it listening on a different port. I would like, if possible, to set things up so that a user could use either dovecot or courier. Having to re-subscribe to folders is OK when moving to dovecot. (It would be nice to be able to make a symbolic link from courier's subscription file to the dovecot one though) (My client for testing is the Mac OS X (10.4.6) Mail client Mail.app -- it seems to do an auto subscribe to folders) I set up a namespace for dovecot, using the wiki as a guide, so: namespace private { # Hierarchy separator to use. You should use the same separator for all # namespaces or some clients get confused. '/' is usually a good one. separator = . # Prefix required to access this namespace. This needs to be different for # all namespaces. For example "Public/". prefix = INBOX. # Physical location of the mailbox. This is in same format as # default_mail_env, which is also the default for it. location = . # There can be only one INBOX, and this setting defines which namespace # has it. inbox = yes # If namespace is hidden, it's not advertised to clients via NAMESPACE # extension or shown in LIST replies. This is mostly useful when converting # from another server with different namespaces which you want to depricate # but still keep working. For example you can create hidden namespaces with hidden=no } (location has to be . or something similar since my ldap schema is purely virtual users and returns the actual root of the maildir) I am able to get the root mailbox (INBOX) to work. I can see new mail and look at mail messages etc. I create a new account in Mail.app that logs in to an existing account (to make sure there is no client cached info involved). It logs in and is able to see the imap folders that exist for this account. However, clicking on the folder does not show any messages at all. dovecot is not creating a subscription file inside the maildir (Mail.app does not allow you to subscribe to folders -- it subscribes to all existing folders for you) And if I try and create a new folder inside the account I get a "CREATE" command failed, server error: unknown namespace How can I get the folders to work with dovecot using my existing maildir++ setup? Thanks Chad --- Chad Leigh -- Shire.Net LLC Your Web App and Email hosting provider chad at shire.net

1 0