- dovecot - dovecot.org

[Dovecot] problems getting dovecot-LDA to work
by Alan Premselaar 26 Apr '06

26 Apr '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 I've setup a test machine and have been playing with dovecot-1.0beta7 and dovecot-lda in preparation for a migration from 0.99.x series. (hopefully with the ability to support imap-quotas) anyways, i've got it all compiled fine (as far as I can tell) and following the directions on the wiki for setting up dovecot LDA with sendmail. (I've had to alter the configuration a bit since using the mailertable didn't work with my actual hostname). when I try to use /usr/local/libexec/dovecot/deliver via sendmail, i get a EX_TEMPFAIL. I logged into the machine as the user I'm trying to deliver mail for and do the following: /usr/local/libexec/dovecot/deliver -d alan and get the following error: deliver: Error: Ambiguous mail location setting, don't know what to do with it: /var/spool/mail/alan (try prefixing it with mbox: or maildir:) deliver: Fatal: Failed to create storage for 'alan' with mail '/var/spool/mail/alan' in /usr/local/etc/dovecot.conf I have the following: protocol lda { postmaster_address = postmaster(a)pluto.valueclick.ne.jp auth_socket_path = /var/run/dovecot/auth-master location = maildir:~/Maildir:INDEX=/var/indexes/%u } I tried setting the default_mail_env with the same settings but got the same results (i did a complete restart of the dovecot services) I've even specified the config file with: /usr/local/libexec/dovecot/deliver -c /usr/local/etc/dovecot.conf -d alan with the same results. Google is not my friend with this problem. Can anyone point me in the right direction to solve this problem? Thanks, alan -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.1 (Darwin) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iD8DBQFETuHuE2gsBSKjZHQRArJlAJ0WDUgyH70sy00uX9FPIPJT+P8VagCg64qA bKDyLOaFibUU8RdaJjbOF7E= =ZY44 -----END PGP SIGNATURE-----

2 2

[Dovecot] Public Shares, Groups and Undeletable Sent E-mails?
by Gavin Henry 26 Apr '06

26 Apr '06

Dear all, We would like to setup, if possible, for example: We have 4 example groups, we various users in those groups: Directors director1,director2 Support manager1,support1,support2,support3 Enquiries manager2,enquiry1,enquiry2,enquiry3 Accounts manager3, accounts1,account2 Shared Mailboxes: Support: Support, user1, user2, user3 Accounts: Directors, Support So basically, we want 2 public folder shares, with the names: Support Accounts Everyone in the Support group and user1-3 should be able to subscribe to the "Support" share. Everyone in the Directors and Support groups should be able to subscribe to the Accounts shares (only an example ;-) ). We also need to set it up that the Managers have visible in the available shares, all the employees that they look after. No private e-mail allowed. Symlinks for this? Is this possible? We already have the subscribtion file and index files saved in their own homedirs. Not sure how to even think about dovecot-shared file and symlinks etc? Lastly, can it be set so a user can't delete their sent e-mails? chattr -i on Sent folder, of ACL in Dovecot? Here's hoping this is all possible ;-) Thanks, Gavin. -- Kind Regards, Gavin Henry. Managing Director. T +44 (0) 1224 279484 M +44 (0) 7930 323266 F +44 (0) 1224 742001 E ghenry(a)suretecsystems.com Open Source. Open Solutions(tm). http://www.suretecsystems.com/

1 0

[Dovecot] login_process_per_user I cant find this???
by Max Stam 25 Apr '06

25 Apr '06

Hi All Just trying to config dovecot and I'm guessing there's been a change in the app. In the dovecot.conf and on http://wiki.dovecot.org/MainConfig I see "Number of login processes to create. If login_process_per_user is yes, this is the number of extra processes waiting for users to log in." but as a config option I only see "login_process_per_connection = yes" Has "login_process_per_user" been changed to "login_process_per_connection = yes"? Thanks Max

1 0

[Dovecot] Sanity checking on dovecot
by Jon Callas 25 Apr '06

25 Apr '06

I'm setting up a new server. I have a couple of dozen users, and several domains. I've set up Postfix as my MTA, and it's dropping things into maildirs. Now I want to get Dovecot to work for POP/IMAP. (Getting SMTP AUTH to work is also on the agenda, but slightly tangential.) Postfix is putting things into /var/mail/vhosts, an example line in my vmailbox file is: test(a)callas.org callas.org/test/ Dovecot is installed via darwinports. (Oh, yeah, this server is an Intel dual-core Mac Mini running OS X 10.4 -- *not* OSX Server.) So I need to figure out how to get dovecot to authenticate in my users. From reading <http://wiki.dovecot.org/VirtualUsers> and <http:// wiki.dovecot.org/Authentication> it will be easiest for me to set up a passwd-file authentication. So I would make some file somewhere in passwd-file format. As an example, I might set up "test(a)callas.org" as: test@callas.org:{plain}pass:1000:1000:Test User:<I think no home dir is needed>::mail=maildir:/var/mail/vhosts/callas.org/test/ Is this reasonable? Is there something easier that I'm missing? Jon

1 0

[Dovecot] Plan/Status of MBX support?
by Jiaying Xu 25 Apr '06

25 Apr '06

Hi, All, I've been happy user of dovocot as far. It is easy to configure, reliable and secure. Hat off to all developers who make this possible! I know dovecot is on the mailbox format front, it supports both mbox and maildir format well, and is developing and experimenting a new flexible format, dbox. But is there any plan to add mbx (i.e., indexed mbox format) support, to complete the set? There is some circumstance that mbox format is chosen over the mordern maildir format, For example in our situation, we receive many, many small messages and it would be expensive to create so many files with maildir. And we do a lot of searching - again a single mbox is faster in searching. Now the problem is, we have to use the tranditional mbox format with dovecot, as it does not support indexed mbox format, which makes deleting messages costly. Also the long-time file locking (due to the slow operation on the dovecot side) causes our MTA (exim, by the way) holds a huge queue. That drives up the system load to mad (load average above 500 is not unusual in our case). If dovecot support index mbox format, we be in the havean! But is there a plan to add this support in the near future? Thanks, JY

5 5

[Dovecot] Test migration (IMAP copy) and INTERNALDATE?
by Apps Lists 25 Apr '06

25 Apr '06

We're trying some migration tests ... from CommuniGate to Dovecot. The migration program does an APPEND into the new mailbox: src>: a0 FETCH 2900 (FLAGS INTERNALDATE RFC822.PEEK) src<: * 2900 FETCH (FLAGS (\Seen) INTERNALDATE "29-Aug-2005 18:36:54 +0000" RFC822 {1194157} src<: ) dst>: bAPP APPEND "INBOX" (\Seen) "29-Aug-2005 18:36:54 +0000" {1194157} dst<: + OK It appears to be trying to set the message date... in this example, to 29 Aug 2005. Dovecot seems to be ignoring it. Am I doing something wrong, or does Dovecot not allow this? Steve

2 7

[Dovecot] Dovecot LDA with sendmail/Mailscanner
by Gerhard Wiesinger 24 Apr '06

24 Apr '06

Hello! I'm running dovecot in a sendmail/Mailscanner/procmail/mbox environment. I want to use dovecot lda because index files aren't updated when using sendmail as lda. Has someone this combination running and some configuration hints so that sendmail, Mailscanner and procmail ist working well. Does procmail work with lda, too? Thank you for the answer. Ciao, Gerhard

1 0

[Dovecot] LOCK FILE
by Alex 24 Apr '06

24 Apr '06

i'm working with exim 4.60, with mbox, and dovecot dovecot-1.0.beta7, and filesystem quotas default_mail_env = mbox:~/mail::INBOX=%h/mbox:INDEX=/tmp/%u lock_method = dotlock fcntl mbox_read_locks = dotlock fcntl mbox_write_locks = dotlock fcntl The home of users is /home/usuaris/user Where place dovecot the lock file?

3 12

[Dovecot] maildir memory usage
by lenny＠edpausa.com 24 Apr '06

24 Apr '06

Dovecot beta 5 + dovecot lda, solaris 9 sparc. Dovecot seems to use a lot of memory with large Maildir folders, ( 300-500 mb folder - 100-200 mb process), something I never noticed with similarly large mboxes. Is that expected behavior or are my observations incorrect.

2 3

[Dovecot] Just setup Dovecot and having a small problem.
by Tom Ray 24 Apr '06

24 Apr '06

I've just installed Dovecot and am running into a bit of a problem with it. I'm using virtual email accounts and everything seems to be working up to a certain point. Let me break down how the server is setup. Each domain belongs under the directory /mail so it's path is basically: /mail/domain.tld. Within each domain directory there are two sub-directories etc and mail. Under /mail/domain.tld/etc I have two files setup aliases and passwd, the aliases file handles all mail aliasing for that domain and the passwd file holds the users account name and password. The password file has the accounts stored in the following format: user@domain.tld:(encrypted password):500:500:Virtual User:/mail/domain.tld/mail/user:/dev/null The password enctryption is basically htpasswd() style encryption. Now the problem I'm having is I keep getting authentication errors when I try to login via POP3 (I'm testing via command line so I do `telnet localhost 110`). At first I had only auth_debug_passwords=yes set and I was seeing this in the log file: Apr 23 18:54:19 www dovecot: auth(default): client in: AUTH^I1^IPLAIN^Iservice=POP3^Isecured^Ilip= 127.0.0.1^Irip=127.0.0.1^Iresp=AHRvbUBkZXRyb2l0b25saW5lLmNvbQBuZXdiZXJn Apr 23 18:54:19 www dovecot: auth(default): pam(user(a)domain.tld,127.0.0.1): pam_authenticate() failed: Authentication failure Apr 23 18:54:19 www dovecot: auth(default): passwd-file /mail/domain.tld/etc/passwd: Read 1 users Apr 23 18:54:19 www dovecot: auth(default): passwd-file(user(a)domain.tld, 127.0.0.1): unknown user Apr 23 18:54:20 www dovecot: auth(default): client out: FAIL^I1^Iuser= user(a)domain.tld So I can see it's reading the proper password file but it claims that user doesn't exist, however, that user does exist. When I turn on auth_verbose=yes and I'm still seeing the same errors in the log file. Can someone tell me what I'm missing here? I'm really on a time crunch with this, our mail server died friday morning and it's been put on me to fix it. They insist I use UW IMAP but I can't get it to work with the vitrtual users like the previous guy did. I've used Dovecot before but it's been two years and I can't remember how I got everything working before. They want things back to normal by Monday morning (tomorrow) so now I'm a bit stressed since I've lost most my weekend rebuilding the server and users. Any help would be appreciated. I thought I had this setup just right but I just can't get passed it telling me the user doesn't exsist.

2 3