- dovecot - dovecot.org

[Dovecot] Dovecot username mapping
by Adam "Fuzzy" Kennedy 25 Feb '06

25 Feb '06

Ok, here's my situation. I currently run IMail 7.x with about 80 domains and nearly 4000 users. I want to switch this to a Linux server. I'm using Virtualmin to manage the users/postfix. I have dovecot working just peachy with the setup, except for one problem. We are an ISP. The easiest thing for us (and our users) is to have them use their full email address as their username. What I need is some way to have Dovecot take a username and map it to the real unix user. Our unix users are created as "username-domain.com" When our users login to our current email system, they enter their username as "username(a)domain.com". I for the life of me cannot figure out how to make Dovecot take "username(a)domain.com" and know that the unix username is really "username-domain.com" Ideas? -Adam "Fuzzy" Kennedy

5 4

RE: [Dovecot] IMAP login name conversion
by Zoong Pham 24 Feb '06

24 Feb '06

> -----Original Message----- > From: Timo Sirainen [mailto:tss@iki.fi] > Sent: Tuesday, 1 June 2004 9:39 PM > To: Zoong Pham > Cc: dovecot(a)dovecot.org > Subject: Re: [Dovecot] IMAP login name conversion > > What passdb and userdb do you use? Unless you're authenticating from > SQL you probably have to modify the source. Let me explain: My server runs OpenBSD-3.5 and Sendmail. We host few virtual domains. Local accounts have login names in this format: login-domain_abc_xyz For example: joedirt-joedomain_com_au, info-adomain_com, info-otherdomain_com That way login accounts are unique across all the virtual domains. I use the OpenBSD pre-compiled dovecot-0.99.10p2. It is set to use "auth_passdb = passwd" and "auth_userdb = passwd" I can use mutt to access my mailbox via IMAPS with login name format joedirt-joedomain_com_au. Other users use different MUA like Outlook and prefer to login with their email addresses (joedirt(a)joedomain.com.au, info(a)adomain.com, info(a)otherdomain.com) We use squirrelmail for webmail. I modified squirrelmail to automatically convert login name from format of joedirt(a)joedomain.com.au to joedirt-joedomain_com_au. So if users use squirrelmail, they can just login with their email addresses. My question is how to achieve the same thing with other MUAs like Outlook? Do I have to modify dovecot source? Can I use LDAP or SQL instead? Note that we are using Sendmail and prefer it than othe MTA. I have looked at the Wiki, specially the "DovecotOpenLdap" but am still confused. Thanks Zoong

3 2

[Dovecot] Old Maildir UW-imap
by Torbjörn Gripp 24 Feb '06

24 Feb '06

Hi all, I'm new in using dovecot and I'm running in a problem, which I cannot solve without hours and hours of work. Maybe there is a solution, which I didn't find with old friend google :_) Here is the problem: We are using an old mailserver (it's running fine for 5 years) with qmail and the old uw-imap server. All users have their grown directories under a home/Maildir folder. All subdirectories are lying under Maildir/sub/sub/sub. Now I want to migrate to dovecot and I have a lot of trouble, cause I cannot find a solution to migrate to the folder structure /Maildir/.sub.sub.sub. It's really difficult cause all the windows users have subdirs like one folder (1945)/a new ö/ and something like that! Any hints?? greetings and sorry for the bad english -- [ t o r b j o e r n g r i p p ] senior systemadministrator opus 5 interaktive medien gmbh grossneumarkt 50 20459 hamburg fon: +49(0)40 350174-439 fax: +49(0)40 350174-404 mobil: 0175 9326096 mailto:gripp@opus5.de http://www.opus5.de

3 2

[Dovecot] Server & move to Dovecot
by K Gilpin 24 Feb '06

24 Feb '06

Hi, I a currently running a server which is using uw-imap server which currently has 190 users. I am looking to move the server OS and the imap server to Dovecot Imap Server. We are currently using mbox as the default mail file. I have a couple of questions to ask. 1) Would it be better if we moved to maildirs during the server move? 2) All current mail files are in a directly called /export/home/mail/%username. How would one configure dovecot to use the above path? How points to any good FAQs would be great. Thanks Kevin

2 1

[Dovecot] Digest-MD5 and GSSAPI not working in beta3
by Casey Allen Shobe 24 Feb '06

24 Feb '06

I have built dovecot with kerberos support, however am not able to log in using GSSAPI support in my mail client. I receive the following error: SASL(-4): no mechanism available: No worthy mechs found Additionally, Digest-MD5 does not work - I receive an authentication failed (as though I have an incorrect password) if I try to use it. I am using PostgreSQL for authentication, and returning a plaintext password with my SQL query. LOGIN, PLAIN, NTLM, and CRAM-MD5 are all working as expected. I tried making the change shown in Mark Davies' src/auth/mech-gssapi.c patch (posted to the list on 10 February), but it had no effect. Any advice welcome! Cheers, -- Casey Allen Shobe | cshobe(a)seattleserver.com | 206-381-2800 SeattleServer.com, Inc. | http://www.seattleserver.com

2 4

[Dovecot] INBOX as Maildir and folders as mbox
by Chris Wakelin 24 Feb '06

24 Feb '06

Hi, I was wondering whether anybody has managed to get Dovecot 1.0 to store INBOX as Maildir and folders as mbox. I've tried something like default_mail_env = mbox:/folders/user/mail:INBOX=maildir:/inboxes/maildir/user:INDEX=/indexes/user but it doesn't seem to work (treats INBOX as mbox). I'm hoping to move some INBOXes from mbox on local disk to Maildir on nicely-mirrored NetApp NFS (or possibly iSCSI) servers for redundancy and better incremental backups. I'm probably doing something silly, or have misunderstood something! Chris -- --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

2 1

[Dovecot] dspam plugin updated
by Johannes Berg 24 Feb '06

24 Feb '06

Hi, Since debian just updated to beta 2, I updated the dspam plugin for that. Also, I added ignoring a Trash folder, Taivo please test if it works for you (but you will need to patch again for dspam daemon mode!) As always: http://johannes.sipsolutions.net/Projects/dovecot-dspam-integration johannes

2 5

[Dovecot] Restore of a message
by Luigi Rosa 23 Feb '06

23 Feb '06

Hello, if I want to restore from a previous backup a single message or a single folder, what is the correct procedure? Do I have to do it with Dovecot shut down? Does Dovecot recognize automagically the new message/folder? Thank you in advance. Ciao, luigi -- +--[Luigi Rosa]--

2 1

[Dovecot] Beta3 bug - non-first make install's fail
by Casey Allen Shobe 23 Feb '06

23 Feb '06

make[4]: Entering directory `/home/root/dovecot-1.0.beta3/src/plugins/convert' mkdir -p -- /usr/lib/dovecot/imap /usr/lib/dovecot/pop3 /usr/lib/dovecot/lda for d in imap pop3 lda; do \ rm -f /usr/lib/dovecot/$d/lib02_trash_plugin.so; \ ln -s ../lib01_convert_plugin.so /usr/lib/dovecot/$d; \ done ln: `/usr/lib/dovecot/imap/lib01_convert_plugin.so': File exists ln: `/usr/lib/dovecot/pop3/lib01_convert_plugin.so': File exists ln: `/usr/lib/dovecot/lda/lib01_convert_plugin.so': File exists make[4]: *** [install-exec-local] Error 1 make[4]: Leaving directory `/home/root/dovecot-1.0.beta3/src/plugins/convert' make[3]: *** [install-am] Error 2 make[3]: Leaving directory `/home/root/dovecot-1.0.beta3/src/plugins/convert' make[2]: *** [install-recursive] Error 1 make[2]: Leaving directory `/home/root/dovecot-1.0.beta3/src/plugins' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/home/root/dovecot-1.0.beta3/src' make: *** [install-recursive] Error 1 Workaround: make uninstall before make install. Fix: Use ln -snf instead of ln -s. -- Casey Allen Shobe | cshobe(a)seattleserver.com | 206-381-2800 SeattleServer.com, Inc. | http://www.seattleserver.com

1 0

[Dovecot] Changing listen ports
by Václav Haisman 23 Feb '06

23 Feb '06

Hi, I want to change ports that Dovecot uses to listen for connections. I have listen = [::] in global section and listen = 0.0.0.0:10143 and listen = 0.0.0.0:10110 in protocol imap and protocol pop3 sections. The problem is that it doesn't seem to work for SSL ports of the two protocols and I get following error when I try to start the service: Fatal: listen(993) failed: Address already in use This is because I still have IMAP-UW installed and running. So, how can I change the SSL ports for both IMAPs and POP3s? Vaclav Haisman

3 2