- dovecot - dovecot.org

[Dovecot] Confused about what MTA, MDA, IMAP/POP server to use
by Netlink Tech 31 Mar '06

31 Mar '06

Hello...I'll TRY make this short. This post is not specific to Dovecot...but many subscribers to this list have probably been down this road. (private replies welcome if you want it to go off list) I currently use Sendmail with MailScanner, SpamAssassin, ClamAV, Procmail, and qpopper for POP3 (hash mail dirs for mbox files)on RedHat 9 server. Roaming users currently only have the option of UebiMiau webmail interface to POP3 (doesn't work well) I will be moving to a server with Fedora Core 5.(x86_64) Things I would like to accomplish: 1) Move to maildir mailbox format (currently large mbox files cause I/O flushing errors and problems for users retrieving). 2) Use squirrelmail for webmail (IMAP) (local or roaming users) 3) Enable local users (ones with current accounts on the server) to continue to use their current client setup. 4) Enable any user to use the webmail interface to retrieve/send email. 5) Enable roaming users (ones connected from any location) to use Outlook Express or similar with SMTP_Auth and port 587 for message submission and POP3/IMAP. 6) Enable mail quota. I want the current users to use their current settings (unless they roam...then require that they use webmail or SMTP_Auth and port 587), but moving forward with new users, I have no reason to give them shell access/system accounts....so I was thinking virtual users using user@domain and storing their auth information in mysql db. (mysql will be used for radius...so it is already running on the server). Because I am trying to figure out how to keep the existing users system accounts and move forward with new users only having virtual accounts (just mail access with no login), I don't think I can use file system quotas. I have used Sendmail for 10 years, so I am familiar with it and it has been very stable for me. (so I prefer to stick with it if I can) I rely heavily on MailScanner to scan/mark/clean virus and Procmail to filter marked spam. Qpopper is on the way out...A couple of weeks messing with the test server and I already love Dovecot. Questions: 1) Recommendations please: How to accomplish with what configuration. 2) Quotas? 3) SMTP_Auth using Mysql for virtual users? (works fine with PAM/system passwords) Sorry for not being Dovecot specific on the list. Curt

2 2

Re: [Dovecot] domain stripping sorry !!
by jasper 31 Mar '06

31 Mar '06

sorry people but a'm searcing for about a year for this sollution im now on double databasses witch gives me ass f* problems I get a lot of " i's an option in dovecot" but nobody gan give me an configuration example. i'l take aniting. On Fri, 31 Mar 2006 14:05:28 +0200, Jan Kundrát wrote > [off-list reply] > > Hi jasper, > FYI, asking the same question three times in five days is considered > impolite by quite a lot of folks. > > Cheers, > -jkt > > -- > cd /local/pub && more beer > /dev/mouth - Als echtparen echt paren hebben echtgenoten echt genoten -- Dit bericht is gescanned op virussen en andere gevaarlijke inhoud door Techspace mailscanner en lijkt schoon te zijn.

1 0

[Dovecot] domain stripping searcing for ages
by jasper 31 Mar '06

31 Mar '06

X-Tech Space-MailScanner-Information: Please contact the ISP for more information X-Tech Space-MailScanner: Found to be clean X-Tech Space-MailScanner-From: redhat(a)techspace.nl I use pam to login my users are stored as j.hendriks now i like to use 2 domains but with the same user and passw and the option that de mail is stored in a difrent directory but i cant get rit of the @domain extention by Autentification i'f made these canges. auth_process_size = 256 auth_cache_size = 5000 auth_cache_ttl = 3600 passdb pam { args = session=yes args = service name="*" args = cache_key=%n args = dovecot } but keeps Autentificating me as j.hendriks@domain insted of j.hendriks what am i doing wrong. help please. -- Dit bericht is gescanned op virussen en andere gevaarlijke inhoud door Techspace mailscanner en lijkt schoon te zijn.

1 0

Re: [Dovecot] Support for Kmail maildir format
by Magnus Holmgren 30 Mar '06

30 Mar '06

Thursday 26 January 2006 18:35 skrev Graham Cobb: > Kmail's use of maildir seems to folow the basic maildir approach except > that sub-folders are handled differently. > > If you create a folder (say it is called ABC) in Kmail and start putting > mail in it, Kmail creates a directory on the disk called ABC (not .ABC) and > creates the cur, new and tmp folders within it to contain the email. > > If you then create a subfolder of ABC (say it is called DEF, contained > within the ABC folder), Kmail creates a directory on the disk called > .ABC.directory and creates the DEF directory within that. > > In other words, maildir directories are given the same name as the mail > folder (with no leading dot) but sub-folders are contained in disk > directories called .<folder-name>.directory. Then we have Evolution, which also uses maildirs but with yet another subfolder naming format (subfolders are created right beside the cur, new and tmp directories). In both cases, the folder names are not UTF-7 encoded on disk, which is worth noticing. -- Magnus Holmgren

1 0

RE: [Dovecot] Shared namespaces
by Mark Lidstone 30 Mar '06

30 Mar '06

Hi Timo, Thanks for the reply. > -----Original Message----- > From: Timo Sirainen [mailto:tss@iki.fi] > Sent: 25 March 2006 09:42 > To: Mark Lidstone > Cc: dovecot(a)dovecot.org > Subject: Re: [Dovecot] Shared namespaces > > > On Fri, 2006-03-17 at 16:03 +0000, Mark Lidstone wrote: > > I logged with Thunderbird as user 1 and everything seems to > work fine. However, when I logged in as user 2 I was getting > all kinds of errors. On checking the permissions of > /home/public/Maildir/subscriptions it was user1:user1 with mode 600. > > Looks like at some point I've thought about adding "subscriptions" > setting to namespaces where you could configure if each one > should have > separate ones. For public/shared namespaces I guess this > should default > to "no". In my case it should default to "yes". It allows people to only see the folders with email relating to their projects. At the moment when a project finishes we have to move it to another store so that it's not clogging up everyone's public folder list. Allowing people to only see the folders they want is one of the features that has attracted us to shared namespaces. > Unfortunately I don't think it's easy to currently make namespace's > subscriptions exist in another namespace. I'll add this in > TODO, but you > could maybe kludge around this by changing the code, eg. set > umask to 0 > before file_dotlock_open() in > src/lib-storage/subscription-file/subscription-file.c and back to > original value afterwards. Don't add it in the TODO - you've already done it (basically). I'd cobbled together a real kludge to use the dovecot-shared permissions on the subscriptions file (kinda - only the group permissions, not the user) and was about to post it to the list when I came across the way you'd already handled it. The subscriptions file is stored in the folder pointed to with the "CONTROL" directive - I just put this to a separate place for every user and it works fine. The only thing that's left is getting this added to the Wiki - I don't think anyone's done that yet. Thanks, Mark CONFIDENTIAL The information contained in this e-mail and any attachment is confidential. It is intended only for the named addressee(s). If you are not the named addressee please notify the sender immediately and do not disclose, copy or distribute the contents to any other person other than the intended addressee(s). VIRUSES The contents of an attachment to this e-mail may contain software viruses which could damage your own computer system. While BMT Nigel Gee and Associates Ltd has taken every reasonable precaution to minimise this risk, we cannot accept liability for any damage which you sustain as a result of software viruses. You should carry out your own virus checks before opening the attachment.

1 0

Re: [Dovecot] How to change login_greeting ?
by spart cus 30 Mar '06

30 Mar '06

Note: forwarded message attached. --------------------------------- Yahoo! Messenger with Voice. PC-to-Phone calls for ridiculously low rates.

1 0

[Dovecot] Dovecote Make failure with MySQL support.
by Nathan 30 Mar '06

30 Mar '06

Hello all. I am trying to compile Dovecot from source on an AMD Opteron based Sun server running Solaris 10. I ran the configue script with the mysql flag on because I need mysql auth support. I am running MySQL version: 5.0.18 Here is where the make fails. Any suggestions? *** Error code 1 make: Fatal error: Command failed for target `driver-mysql.o' Current working directory /export/home/nathan/dovecot-1.0.beta3/src/lib-sql *** Error code 1 The following command caused the error: failcom='exit 1'; \ for f in x $MAKEFLAGS; do \ case $f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo all-recursive | sed s/-recursive//`; \ list='lib lib-dict lib-sql lib-ntlm lib-settings lib-charset lib-mail lib -imap lib-index lib-storage lib-auth auth dict master login-common imap- login imap pop3-login pop3 util plugins'; for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `all-recursive' Current working directory /export/home/nathan/dovecot-1.0.beta3/src *** Error code 1 The following command caused the error: failcom='exit 1'; \ for f in x $MAKEFLAGS; do \ case $f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo all-recursive | sed s/-recursive//`; \ list='src doc'; for subdir in $list; do \ echo "Making $target in $subdir"; \ if test "$subdir" = "."; then \ dot_seen=yes; \ local_target="$target-am"; \ else \ local_target="$target"; \ fi; \ (cd $subdir && make $local_target) \ || eval $failcom; \ done; \ if test "$dot_seen" = "no"; then \ make "$target-am" || exit 1; \ fi; test -z "$fail" make: Fatal error: Command failed for target `all-recursive' Current working directory /export/home/nathan/dovecot-1.0.beta3 *** Error code 1 make: Fatal error: Command failed for target `all' Thanks for your time.

1 0

[Dovecot] sig11 with 1.0.beta3 on openbsd-i386
by David Gwynne 30 Mar '06

30 Mar '06

i recently helped a friend of mine migrate from imap-uw using mboxes to dovecot on top of Maildirs and came up against two issues. this is quite embarrassing as ive been claiming dovecot is Solid As A Rock(tm) and hasn't ever given me any issues. 1. if dovecot runs out of file descriptors it will loop forever trying to open new logging pipes. the code in question is at line 624 of src/master/login-process.c 2. we get a sig11 in the imap process. heres the bt: dlg@mail dlg$ gdb -c imap.core /usr/local/libexec/dovecot/imap GNU gdb 6.3 Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-unknown-openbsd3.9"... Core was generated by `imap'. Program terminated with signal 11, Segmentation fault. Reading symbols from /usr/local/lib/libiconv.so.4.0...done. Loaded symbols for /usr/local/lib/libiconv.so.4.0 Reading symbols from /usr/lib/libc.so.39.0...done. Loaded symbols for /usr/lib/libc.so.39.0 Reading symbols from /usr/libexec/ld.so...done. Loaded symbols for /usr/libexec/ld.so #0 0x1c04895a in mail_transaction_log_view_set (view=0x7f0b8300, min_file_seq=2, min_file_offset=208, max_file_seq=2, max_file_offset=208, type_mask=MAIL_TRANSACTION_APPEND) at mail-transaction-log-view.c:107 107 if (min_file_seq == view->log->tail->hdr.prev_file_seq && (gdb) bt #0 0x1c04895a in mail_transaction_log_view_set (view=0x7f0b8300, min_file_seq=2, min_file_offset=208, max_file_seq=2, max_file_offset=208, type_mask=MAIL_TRANSACTION_APPEND) at mail-transaction-log-view.c:107 #1 0x1c044e91 in view_sync_set_log_view_range (view=0x7efaa800, type_mask=65532) at mail-index-view-sync.c:102 #2 0x1c045109 in mail_index_view_sync_begin (view=0x7efaa800, sync_mask=252, ctx_r=0x2) at mail-index-view-sync.c:216 #3 0x1c037e58 in index_mailbox_sync_init (box=0x82cf2840, flags=28, failed=8) at index-sync.c:151 #4 0x1c01bbb4 in maildir_storage_sync_init (box=0x82cf2840, flags=28) at maildir-sync.c:1343 #5 0x1c04c270 in mailbox_sync_init (box=0x2, flags=28) at mail-storage.c:375 #6 0x1c0167fa in imap_sync_init (client=0x7f0b8000, box=0x82cf2840, imap_flags=2, flags=28) at imap-sync.c:46 #7 0x1c016c80 in cmd_sync (cmd=0x7f0b8044, flags=28, imap_flags=0, tagline=0x3c0005cf "OK Search completed.") at imap-sync.c:231 #8 0x1c00ff9f in cmd_search (cmd=0x7f0b8044) at cmd-search.c:99 #9 0x1c010fb5 in cmd_uid (cmd=0x7f0b8044) at cmd-uid.c:19 #10 0x1c01186b in client_handle_input (cmd=0x7f0b8044) at client.c:364 #11 0x1c01199a in _client_input (context=0x7f0b8000) at client.c:415 #12 0x1c05d0a4 in io_loop_handler_run (ioloop=0x848ed220) at ioloop-kqueue.c:200 #13 0x1c05c701 in io_loop_run (ioloop=0x80e6a000) at ioloop.c:246 #14 0x1c0184f3 in main (argc=1, argv=0xcfbd5554, envp=0xcfbd555c) at main.c:238 (gdb) x view->log->tail->hdr.prev_file_seq Cannot access memory at address 0x7f0bca (gdb) x view->log->tail->hdr Cannot access memory at address 0x7f0bbe (gdb) x view->log->tail 0x7f0b82: Cannot access memory at address 0x7f0b82 (gdb) x view->log 0x7f0b8181: 0x007efaa2 in both cases the problem was triggered with Apple Mail 2 as the client. the user has maybe a dozen mailboxes, the largest of which is aoubt 10k messages. if you need any more detail, please dont hesitate to ask. i would like this to work so i dont have to keep apologising. dlg

1 0

[Dovecot] Realm Stripping
by Michael Baird 30 Mar '06

30 Mar '06

I saw some discussion on this from the middle of last year. Looking through the archives, there didn't seem to be a full solution using a standard dovecot configuration. Did this issue get resolved within dovecot? Will it strip domains from the login presented by the customer. I currently am using dovecot for imap with a webmail system (I strip the domain there before it hits dovecot), but I'd like to replace qpopper with dovecot's pop3, just need to work out the domain stripping bit. Regards Michael Baird

2 1

[Dovecot] Solution to Dovecot-lda configure problem on RHEL4/FC4
by Tomi Hakala 29 Mar '06

29 Mar '06

Hello, After a long break from Dovecot I finally managed to compile Dovecot-lda on RHEL 4 x86_64 platfrom. For some reason $LIBICONV translates to a @LIBICONV@ on config.status which generates loop for sed. Solution is to manually edit "configure" after autogen.sh. In configure change line s,@LIBICONV@,$LIBICONV,;t t to s,@LIBICONV@,,;t t After this configure finishes succesfully. Tomi

1 0