- dovecot - dovecot.org

[Dovecot] dovecot-auth defunct
by Oliver Schulze L. 06 Jun '05

06 Jun '05

Hi, I'm running dovecot-0.99.11-2.EL4.1 in RHEL4 and a couple of hours ago, I could not longer login in the imap or pop3 service. I noted that I have a process like this: root 8130 0.0 0.0 0 0 ? Z 16:55 0:00 [dovecot-auth] <defunct> It this ok to have a defunct proccess? I can not kill this process. I have to stop the dovecot service, killall pop3-login and imap-login and then start dovecot again. Is there a solution for this? Any hint? I already enabbled the debug of dovecot-auth. I have my user accounts on a local LDAP using nss_ldap. Many thanks Oliver -- Oliver Schulze L. <oliver(a)samera.com.py>

2 2

[Dovecot] Migration from pop3 to imapd
by Stephan Holl 06 Jun '05

06 Jun '05

Dear list, I am planing to set up dovecot-imapd on my production-mail server which currently only runs pop3 via qpopper on debian-sarge. It would be best, if I could only use imapd and use the existing pop3- server (qpopper) as it is. Is this possible? Can the user both use pop3 (qpopper) and imapd (dovecot) in parallel then? Where does dovecot-imapd store its mails? Does it store its mail in mbox-format in ~/mail, where also e.g. pine or mutt can access the mbox? Pretty dumb question I guess, but I want to make sure that nothing goes wrong during installation. It is a must that nothing changes on the server for my users. Best regards and thanks for your help Stephan Holl

6 5

[Dovecot] maildir create problem
by Alex 06 Jun '05

06 Jun '05

Hello, I got the error failed to create storage data. I changed some things and now I get the following message: mkdir(/home/mail/domain.nl/info/.Trash) failed: No such file or directory The directory for domain.nl is not created either. Other emailaccounts which were running very good already have no problem. Can anyone give me a direction what the problem could be? thanks, Alex

2 2

[Dovecot] Help on dovecot, imap, maildir and subfolders
by Lanhai Li 06 Jun '05

06 Jun '05

I have Fedora Core 2 and dovecot-0.99.10.5-0. I've done nothing to configure it but it seems to have found the Mail dir in my home directory ok and I can connect using IMAP. But I can't create subfolders. If I right click on inbox, there's a 'New Folder...', but if I create one then right click on it, no more 'New Folder...'. So it seems folders can only go one level deep. Many Thanks! Lanhai LI __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

[Dovecot] performance problem?
by Han-Wen Nienhuys 06 Jun '05

06 Jun '05

Hi, I'm running dovecot on a small server. I put all my mail from the last 10 years on it (approx. 160 mb). I'm seeing terrible performance. Sometimes, my client needs several minutes to display a message. This is with mutt, thunderbird and evolution. Copying an outbound message to the Sent IMAP folder (15k messages) typically takes a few minutes, but can be quite fast on occasion (Thunderbird). How can I debug this problem? I'm running dovecot .99.14 on a Mac Mini (OS X 10.3, 512 mb, 80 gb). -- Han-Wen Nienhuys - hanwen(a)xs4all.nl - http://www.xs4all.nl/~hanwen

3 3

[Dovecot] AUTH patch for Postfix 2.3?
by /dev/rob0 06 Jun '05

06 Jun '05

The 2.2.1 patch works fine on Postfix 2.2.3 but not on the 2.3 snapshots. Any plans to update it for 2.3? On a similar subject, Timo, are you going to try again to get it accepted by Wietse? If so I'd try to help out with the documentation part. I'm just not sure he'll accept it anyway, what with Dovecot auth only being used by Dovecot ... Thanks, BTW ... it works nicely and was very easy to set up. Postfix 2.2.x is good enough for me, for now. -- mail to this address is discarded unless "/dev/rob0" or "not-spam" is in Subject: header

2 1

[Dovecot] POP3 download problem
by Eddie du Plessis 06 Jun '05

06 Jun '05

Hi All I am experiencing a mail download problem with dovecot's pop3 protocol. We use outlook XP 2002 mail clients and I have setup a mail system with pop accounts on a Fedora 2 installation using dovecot. Some of the clients download email fine but others do not download email and also do not give any error messages. I have enabled the "verbose" options in the /etc/dovecot.conf and all the logged messages appear the same for those who get email and for those who don't. I listed the /var/spool/mail directory and can see mail in the accounts who do not seem to download. We are running an 80 - 90 user system. I have even tried IMAP on the clients with no success. There is nothing viable in the system log. I would appreciate it if you could help. Thank you Kind regards, Eddie Eddie du Plessis IT Administrator Now Media(PTY) Ltd 32 Fricker Road Illovo Boulevard Johannesburg Cell: 082 777 8110 Tel: 011 214 7302 Fax: 011 327 4094 www.nowmedia.co.za _________ "This e-mail, its attachments and any rights attaching hereto are, unless the contents clearly indicate otherwise, the property of Now Media (Proprietary) Limited. It is confidential, private and intended for the addressee only. Should you have received this email in error, kindly notify the sender and delete this e-mail immediately. Do not disclose or use this e-mail in any manner whatsoever. Views and opinions expressed in this e-mail are those of the sender, unless clearly stated as those of Now Media (Proprietary) Limited. Now Media (Proprietary) Limited accepts no liability for any loss or damages whatsoever and howsoever incurred or suffered, resulting or arising from the use of this email or its attachments. Now Media (Proprietary) Limited does not warrant the integrity of this e-mail or that it is free of errors, viruses, interception or interference."

4 4

[Dovecot] failed to create storage data
by Alex 06 Jun '05

06 Jun '05

Hello, I have a problem. I get the message 'Failed to create storage with data' I have 2 emailaccounts which are working perfect and that worked fine. But now I want to add another account and now it said 'Failed to create storage with data' What is the problem? I have the same rights on the directory and it worked first fine. I didn't changed it. Can any one point me in the good direction? I use dovecot with mysql and postfix. thanks in advance, Alex

2 5

[Dovecot] Maildir
by Jason P Buscema 06 Jun '05

06 Jun '05

I've spent most of the morning looking through the archives. Great information, however, I'm still unable to get my issues figured out. I believe I am missing something quite simple. From what I have read, I want to use maildir, mainly because it will allow the use of subfolders for my clients. My clients are running Mail.app (mostly) on 10.3 clients. I'm planning on using imap and my clients must be able to create sub folders to organize their email. I'm running into a couple problems. First, when I send an email to myself I see in the procmail log that it writes that message to: Folder: /Network/Servers/milhouse/Users/jpbuse/Maildir/new/msg.ZAgKB However, when I send a message to another user on the same server it writes the message to: Folder: /var/mail/someuser I don't understand why the home directory changed. I don't believe I have anything custom in my account vs anyone else. My second issue/question.. how do I get Mail.app and SquirrelMail to see the email now that is not no longer in ~/mail ? Home directories are in this format on the server: /home/users/j/jp/jpbuse Users are authenticated via LDAP and their home directory actually is: /Network/Servers/milhouse/Users/jpbuse I have a symlink that takes care of this and from what I can tell, works just fine. Changed the following line in /etc/dovecot.conf: default_mail_env = maildir:%h /etc/procmailrc looks like: # .procmailrc PATH=/usr/bin:/bin:/usr/local/bin MAILDIR=$HOME/Maildir DEFAULT=$MAILDIR/new PMDIR=/tmp/procmail LOGFILE=/var/log/procmail # Use SpamAssassin INCLUDERC=/etc/mail/spamassassin/spamassassin-spamc.rc dovecot-0.99 procmail-3.22 sendmail-8.13

3 2

[Dovecot] can't get md5 stored passwords to work
by Benjamin Engle 06 Jun '05

06 Jun '05

In my mysql database everyone has plain passwords. I set the password don my account to {PLAIN-MD5}md5sum but when I go to login it wont let me. But I can log in with "{PLAIN-MD5}md5sum" it's like it ignores the whole {scheme} thing. So I changed my dovecot-mysql.conf to: default_pass_scheme = PLAIN-MD5 In the password field for my username I just used the md5sum. I stopped dovecot and killed all remaining processes and then started it. But it doesn't try to do md5 it is still doing plain text. Anyone know what I'm doing wrong? I looked and there are no compile time options that I need for this to work... Dovecot Version 0.99.13

2 1