- dovecot - dovecot.org

[Dovecot] Auth Issue
by Adam Barrett 25 May '05

25 May '05

I am so confused. Can someone help me out here? I have set it up so that it is to accept login via PLAIN TEXT. I am using Thunderbird to connect, and it will ask for my password (the username is already in the system) I get a pop-up for Enter the password for Username on Domain.com I enter my password (the same I would use to login to FTP) and it fails. Any thoughts? -- Adam Barrett dragen(a)gmail.com

3 2

[Dovecot] Simply can't figure it out
by Gaby vanhegan 24 May '05

24 May '05

Hi, I'm having a hideous problem trying to get the latest stable version to work. I've had no success and simply can't pinpoint the problem. Sorry for the rather long email but I've included as many details as I can to help here. I've been trying to install the latest stable version (as of 23rd May 2005) by downloading the tarball from the site to my OpenBSD 3.6 box, and building with these arguments: # ./configure --localstatedir=/var --with-ssl=openssl --with-ssldir=/etc/ssl --without-vpopmail - -without-pam --without-shadow Which builds fine. Here are some files from the installation folder: http://vanhegan.net/dovecot/config.log http://vanhegan.net/dovecot/config.status Here's my configuration file. I only really want to server imaps, but I've turned on imap for debuggering purposes: http://vanhegan.net/dovecot/dovecot.conf And it's running from my inetd.conf: # Dovecot IMAP services 144 stream tcp nowait root /usr/local/libexec/dovecot/imap-login imap-login --group=default/imap imaps stream tcp nowait root /usr/local/libexec/dovecot/imap-login imap-login --group=default/imap --ssl (I'm running on port 144 to not clash with the existing IMAP service on port 143). Now, no matter what I try, I simply can't make it login, or start the process: (restart inetd, dovecot, check they're dead) bash-3.00# kill -HUP `cat /var/run/inetd.pid` bash-3.00# kill -TERM `cat /var/run/dovecot/master.pid` bash-3.00# ps auwx | grep dove root 828 0.0 0.1 84 456 p2 S+ 8:39PM 0:00.01 grep dove bash-3.00# /usr/local/libexec/dovecot/imap-login --group=default/imap F/usr/local/libexec/dovecot/imap-login can be started only through dovecot master process, inetd or equilevant (start dovecot, check it's running, error expected, other imap server already running) bash-3.00# /usr/local/sbin/dovecot Fatal: listen(143) failed: Address already in use bash-3.00# ps auwx | grep dove root 14041 0.0 0.3 212 1012 ?? Ss 8:39PM 0:00.06 dovecot root 3496 0.0 0.2 276 608 ?? S 8:39PM 0:00.02 dovecot-auth root 10928 0.0 0.1 104 456 p2 S+ 8:40PM 0:00.01 grep dove (try and login) bash-3.00# /usr/local/libexec/dovecot/imap-login --group=default/imap Fatal: EOF while reading environment from master bash-3.00# tail /var/log/dovecot dovecot: May 23 20:34:19 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:35:06 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:00 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:04 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:07 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:07 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:07 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:38:57 Warning: Killed with signal 15 dovecot: May 23 20:39:39 Info: Dovecot v1.0-stable starting up dovecot: May 23 20:40:25 Error: login: Unknown protocol 'imap?W' (try an SSL login) bash-3.00# openssl s_client -connect localhost:993 CONNECTED(00000004) 24195:error:140770FC:SSL routines:SSL23_GET_SERVER_HELLO:unknown protocol:/usr/src/lib/libssl/ssl/../src/ssl/s23_clnt.c:475: bash-3.00# tail /var/log/dovecot dovecot: May 23 20:35:06 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:00 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:04 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:07 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:07 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:37:07 Error: login: Missing protocol from server name 'imap' dovecot: May 23 20:38:57 Warning: Killed with signal 15 dovecot: May 23 20:39:39 Info: Dovecot v1.0-stable starting up dovecot: May 23 20:40:25 Error: login: Unknown protocol 'imap?W' dovecot: May 23 20:44:20 Error: login: Unknown protocol 'imap?W' HELP PLEASE!!! I've scoured t'internet and the closest I can find is this: http://dovecot.org/pipermail/dovecot/2005-February/006284.html Which got me past the "missing protocol from server" problem but hasn't got anywhere. I've since fallen back to the version in ports from OpenBSD 3.6 but really want to get this going. Any ideas? Gaby -- Junkets for bunterish lickspittles since 1998! gaby(a)vanhegan.net http://weblog.vanhegan.net

4 6

[Dovecot] Newbie-ish Questions
by Joe Dauncey 24 May '05

24 May '05

Hi, I'm in the process of migrating from local Maildir, to IMAP-enabled Maildir (terms are made up by me). I have my Maildir directories all under $HOME/Mail I have a procmail script that sorts everything into different folders under $HOME/Mail, and leaves the rest in a Maildir folder chosen by me, that I think of as my INBOX. Now, I am assuming that the folder I identify as INBOX is the one that a client will interpret as the INBOX? I really want the INBOX to be one of the folders under $HOME/Mail, but at the moment dovecot only will only consider the folder $HOME/Mail as the INBOX, so I have to send my 'inbox' mail to $HOME/Mail, rather than what I would prefer, which would be $HOME/Mail/INBOX (or something like that). The seting I have in dovecot.conf is: default_mail_env = maildir:~/Mail Is this is the only way, or am I doing something wrong? Should I be using default_mail_env to define the inbox? e.g. with: default_mail_env = maildir:~/Mail:INBOX=INBOX (or whatever my inbox mail folder name is) Maybe I've just got my Maildir folder set up completely wrong, and I'm supposed to accept the Maildir folder itself as the inbox? If so, please just send me on my way ;-) Also, since I don't know much about IMAP, where can I find out what the .subscriptions file is, and what it does, and also all the other files created by dovecot, like the .imap files and the .customflags Thanks, Joe -- Joe Dauncey

3 5

[Dovecot] Read-only mail folders
by Chris Wakelin 24 May '05

24 May '05

Is it possible to have folders on read-only partitions in Dovecot 1.0-stable? We have a NetApp fileserver which would probably be accessed via NFS (though iSCSI is possible) and which stores readonly "snapshots" of every directory accessible as .snapshot (but usually hidden from the operating system). It would be very nice to set up a "snapshot" namespace something like :- namespace public { separator = / prefix = "#snapshot/" location = maildir:%h/Maildir/.snapshot/nightly.0 hidden = yes } so that users could recover messages from say yesterday's version of their mailbox. Unfortunately, Dovecot always seems to want to write to the directory, even when indexes are stored elsewhere (as recommended with NFS anyway, I think) using INDEX=whatever in the location line. Best Wishes, Chris --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+-- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

2 6

[Dovecot] problem with an howto from the wiki.
by kramer＠freemail.it 24 May '05

24 May '05

hello, i'm reading and trying to configuring my mailserver following this howto on the dovecot wiki: http://wiki.dovecot.org/moin.cgi/DovecotPostgresql but i got always this problem: ERROR: permesso negato per la relazione postfix_virtual in english is "permission denied for the relation postfix_virtual". I dont know where the problem is, but if i send an email from localhost all works good, the problem appear when i try to test my mailserver sending an email from another mta. this is what i got as error: Recipient address rejected: User unknown in local recipient table (in reply to RCPT TO command) excuse me in advance for my poor and ugly english. thanks! ciao, peppe --------------------------------------------------------------- Scegli il tuo dominio preferito e attiva la tua email! Da oggi l'eMail di superEva e' ancora piu' veloce e ricca di funzioni! http://webmail.supereva.it/new/ ---------------------------------------------------------------

2 1

[Dovecot] (no subject)
by Brent Clark 24 May '05

24 May '05

Hi all I just compiled Dovecot v1.0-test70 and i tried using the dovecot-example.conf for a quick test to see if the daemon would work. But I keep getting the following error message in me /var/log/messages: May 17 12:33:46 mail dovecot: Dovecot v1.0-test70 starting up May 17 12:33:47 mail dovecot: Auth process died too early - shutting down May 17 12:33:47 mail dovecot: auth(default): No password databases set May 17 12:33:47 mail dovecot: child 29405 (auth) returned error 89 This is is a section in my conf file. auth default { mechanisms = plain auth_userdb = passwd auth_passdb = pam #auth_userdb = passwd #auth_passdb = pam #userdb = /etc/passwd #passdb = /etc/passwd # passdb pam { # Service name or * as parameter. * means the authenticating service name # is used, eg. pop3 or imap. #args = dovecot # args= /etc/passwd # } # /etc/passwd or similar, using getpwnam() # In many systems nowadays this uses Name Service Switch, which is # configured in /etc/nsswitch.conf. # passdb passwd { # args= /etc/passwd # } # /etc/shadow or similiar, using getspnam(). Deprecated by PAM nowadays. # passdb shadow { # args= /etc/shadow # } # passwd-like file with specified location #passdb passwd-file { #} userdb passwd { } # passwd-like file with specified location #userdb passwd-file { # Path for passwd-file #args = #} # Path for passwd-file #args = #} # checkpassword executable authentication #passdb checkpassword { # Path for checkpassword binary #args = #} If anyone has some advice or tips, it would greatfully be appreciated. Kind Regards Brent Clark

2 5

[Dovecot] Stability
by Casey Allen Shobe 24 May '05

24 May '05

I am currently using Dovecot 0.99.14-r1 as provided by Gentoo, in a Qmail + VPopmail configuration. I am curious as to how to configure it to ensure the most stability, as it serves >1000 clients. I would rather disable any indexing that give small speed improvements if they are not known to be stable. Advice? Cheers, -- Casey Allen Shobe | http://casey.shobe.info cshobe(a)seattleserver.com | cell 425-443-4653 AIM & Yahoo: SomeLinuxGuy | ICQ: 1494523 SeattleServer.com, Inc. | http://www.seattleserver.com

2 1

[Dovecot] 1.0-stable loses flag changes sometimes?
by Chris Wakelin 24 May '05

24 May '05

I've been struggling with an odd bug in the latest 1.0-stable (20050427) release. Sometimes Dovecot seems to forget that a message has been read or deleted and marks it unread (or not deleted). As far as I've been able to determine, it seems to happen when 1) There have been several recent deliveries 2) Possibly some of those deliveries are of multiple messages 3) Possibly they are read very quickly (say only a second for each message) 4) Folder is an mbox (haven't tried Maildir) I've seen it with Thunderbird mostly, but did manage to recreate it once in "telnet" - the debug IMAP client ;) - using "IDLE" "FETCH" and "STORE msgid +FLAGS (\Seen)" commands. I managed to catch it in the act with one Thunderbird session, and it seemed to occur when Thunderbird, for some reason, issued an IMAP "CHECK" command. In this case it issued an extra "* 710 FETCH (FLAGS (\Recent))" response (the new messages had been msgid 711-715). Incidentally, Thunderbird seems to do a "STORE .. +FLAGS (\Seen)" command even though this is implicit the "FETCH .. BODY[..]" command (and it gets informed of the flag change in the response). I've tried and tried to find a "formula" for re-creating the problem "on demand", but it only goes wrong occassionaly. My guess is it's some sort of timing thing with mbox sync (BTW we have "mbox_dirty_syncs = yes" and "mbox_very_dirty_syncs = no"). Has anybody else seen this? I'm hoping to roll out this version to our wider group of testers soon and would like to get this issue solved first if possible (it counts as an annoyance rather than a serious problem). Best Wishes, Chris --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+-- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

5 15

[Dovecot] Info request
by Filip Cristian 23 May '05

23 May '05

Hello, I'am Filip Cristian System Administrator at Astral Telecom and i'am using on our email servers dovecot for pop*, imap* auth with mysql suport. I have noticed that in the 1.0-test* release you have support for multiple password databases. From what i have tested this it's working but only if you want to fallback to another supported password databases different that the privios. Is there a posibility to use multiple mysql authentication ? I mean to use two or more mysql hosts on wich to connect and search for the username if the user it's not in the first database? Best regards, -- Cristian Filip Network Administrator Astral Telecom Dostoievski 28, Cluj-Napoca Tel: 0364-100106 Fax: 0264-414688 http://www.astral.ro !DSPAM:4291eb3c217031927099527!

3 2

[Dovecot] dovecot and php imap_open
by Daniel 23 May '05

23 May '05

Hi I'm have problems with dovecot and the php imap_open function. Can't seem to get it to work. I just get a "Aborted login [127.0.0.1]" in the dovecot logs. The php error is: [client 192.168.1.254] PHP Warning: imap_open(): Couldn't open stream {127.0.0.1:110/pop3/notls/norsh/novalidate-cert}INBOX in /var/www/html/mail/auth.php on line 89, referer: [client 192.168.1.254] PHP Notice: (null)(): Can't open mailbox {127.0.0.1:110/pop3/notls/norsh/novalidate-cert}INBOX: invalid remote specification (errflg=2) in Unknown on line 0, referer: Same type of error with ether imap or pop3. Anyone have a trick around this? Thanks for any help. Regards Daniel

2 1