- dovecot - dovecot.org

[dovecot] pine/dovecot issues
by David E. Storey 03 Mar '03

03 Mar '03

Folks, I'm running into some issues with pine and dovecot. (dovecot is running mbox for now... plan to switch to maildir soon.) At first I thought it was a funky issue with the way I was using pine to access mailboxes. (I use rsh to invoke imap as pre-authenticated so when I switch to maildirs, I don't have to worry about pine being patched to support it.) But after switching over to using authenticated IMAP over port 143, it still had issues. I'm getting messages like: Junk in start of group Not an Address Junk at end of envelope Unknown Message property Thus far, it seems to only occur in pine. (Squirrelmail and evolution appear to be fine) Is it the client? Is it dovecot? is it easily fixable? It feels like some sort of escaping issue or parsing issue or something. I just don't know enough about IMAP to determine exactly what it is. I'm using dovecot v0.99.8, MAIL=mbox:%h/Mail/:INBOX=%h/.mailbox I've just converted off of wu-imap in hopes of someday migrating to maildirs on that box. (anyone know of a good mbox to maildir conversion tool? I used to have on that worked fine, but I've since found a ton that don't work well for me at all. I have about a gig of email to backup and convert) d!

3 4

[dovecot] ldap config
by Stefan Sels 02 Mar '03

02 Mar '03

Hi, how do I setup the config to use an ldap server for authentification ? I tried : auth_userdb = ldap:/usr/local/dovecot/etc/dovecot-ldap.conf auth_userdb = ldap:/usr/local/dovecot/etc/ auth_userdb = usr/local/dovecot/etc/dovecot-ldap.conf however I got an error. What is the correct syntax for the ldap config ? Regards, Stefan Sels

2 1

[dovecot] patch for src/auth/db-ldap.c
by Alex Howansky 01 Mar '03

01 Mar '03

*** src/auth/db-ldap.c.orig Sat Mar 1 00:20:10 2003 --- src/auth/db-ldap.c Sat Mar 1 00:20:31 2003 *************** *** 35,42 **** DEF(SET_STR, pass_attrs), DEF(SET_STR, pass_filter), DEF(SET_STR, default_pass_scheme), ! DEF(SET_STR, user_global_uid), ! DEF(SET_STR, user_global_gid) }; struct ldap_settings default_ldap_settings = { --- 35,42 ---- DEF(SET_STR, pass_attrs), DEF(SET_STR, pass_filter), DEF(SET_STR, default_pass_scheme), ! DEF(SET_INT, user_global_uid), ! DEF(SET_INT, user_global_gid) }; struct ldap_settings default_ldap_settings = { -- Alex Howansky Wankwood Associates http://www.wankwood.com/

1 0

[dovecot] Re: zlib support
by Ian R. Justman 26 Feb '03

26 Feb '03

Timo Sirainen wrote: > Yes, it's been in todo for some time now. mbox support would likely be > read-only, read-write would require recreating the whole .gz file on > updates. Actually, I wouldn't mind seeing something like this so I can compress up my old mail and perhaps store them on CD, for example. I tend to archive mailing list traffic by month (which I store in mbox format), so past months tend to not change much, if at all. :) While not an absolute necessity, it'd be nice to have. --Ian.

1 0

[dovecot] zlib support
by seth vidal 26 Feb '03

26 Feb '03

Hi, Silly idea, Ever considered zlib support so the imap server could read through gzipped mbox files or gzipped maildir entries? -sv

2 1

[dovecot] pop3: last, and auth plain
by Mark E. Mallett 26 Feb '03

26 Feb '03

Hi- A couple of comments regarding the POP3 server (I realize the POP3 server is probably low priority though..) One problem is that the "LAST" command is not supported. Some mail clients end up downloading all messages every time because of this (or so I'm told). The biggest source of these remarks is people using the yahoo webmail front end. I wonder if this could be added? Also, under BSD/OS, the "auth plain" mechanism doesn't work. Perusing the mailing list archives, I see that the symptoms appear just like those that were reported earlier for another BSD system. I'm curious as to whether there has been any progress on that front? Yours, -mm-

2 4

[dovecot] 0.99.8 released
by Timo Sirainen 25 Feb '03

25 Feb '03

Hope I didn't forget anything :) v0.99.8 2003-02-25 Timo Sirainen <tss(a)iki.fi> * NOTE: Configuration file has changed a bit: auth_userinfo was replaced by userdb and passdb. *_port were merged into *_listen. Disabling listening in imaps port is now done by changing protocols setting. * Maildir: .customflags location has changed for INBOX. If you have set any custom flags, move Maildir/.INBOX/.customflags into Maildir/.customflags or they will be lost. * mbox: Autodetect /var/mail/%u and /var/spool/mail/%u as INBOXes if they're found and mail_default_env isn't set. * passwd-file: File format changed a bit. If you used realm or mail fields, you'll have to fix the file. See doc/auth.txt for description of the format. + Fully featured POP3 server included. Disabled by default. + Support for LITERAL+, MULTIAPPEND, UNSELECT, IDLE, CHILDREN and LISTEXT extensions. + LDAP authentication support. + Internal API cleanups made Dovecot faster and take less memory + auth_verbose logs now all authentication failures + Support for Solaris 9 sendfilev() + New setting: mail_full_filesystem_access allows clients to access the whole filesystem by simply giving the path before the mailbox name (eg. SELECT ~user/mail/box, LIST "" /tmp/%). While this allows users to share mailboxes, it's not recommended since Dovecot's index files can't be safely shared. + New setting: client_workarounds. + Dynamically loadable authentication modules. Binary package builders should consider using it for at least LDAP. + mbox: Content-Length is saved now to each saved message, so it's now safe to have lines beginning with "From ". + mbox: mail_read_mmaped = no works with it now + Indexes can be kept in memory by adding :INDEX=MEMORY to MAIL environment. There's not much point to do this now though, since the UIDs won't be saved. - COPY now behaves as RFC2060 says: "If the COPY command is unsuccessful for any reason, server implementations MUST restore the destination mailbox to its state before the COPY attempt." - LIST and LSUB rewrite, should fix several bugs in them - maildir_copy_with_hardlinks = yes was broken. - mboxes in subfolders weren't selectable. - STORE didn't accept multiple flags without () around them - PLAIN SASL-authentication was a bit broken. - IMAP dates were parsed a few hours wrong - STATUS command removed \Recent flags from messages - Several bugfixes to SEARCH command, especially related to multiple search conditions - If auth/login process died unexpectedly at startup, the exit status or killing signal wasn't logged. - mbox parsing might have crashed sometimes - mbox: when saving mails, internal headers were allowed in input, sometimes causing problems (eg. duplicate headers) when appending and copying messages - mbox: X-Keywords headers were duplicated - Some small fixes to how messages are saved to Maildir - Next command after STARTTLS was ignored which left the connection stuck sometimes - Dovecot was pretty much broken with FreeBSD

1 0

[dovecot] Re: Configuration file format changes
by Timo Sirainen 25 Feb '03

25 Feb '03

On Tue, 2003-02-25 at 02:56, Brad Figg wrote: > Just my $.02 (and that's probably overcharging). Anytime I need > a config file I use XML and an open source parser. I hate XML config files. Not going to happen. Ever. :) I think they're difficult to read with standard text editor. Even more difficult to modify. And creating read-only parser for just about any config file format doesn't take hardly any time. External XML libraries would also annoy people.

2 1

[dovecot] Configuration file format changes
by Timo Sirainen 24 Feb '03

24 Feb '03

After tomorrow's 0.99.8 release I think it's time for a new config file format. It could be made backwards compatibile with the old format, but there would be new tree-like categories. I was thinking something like this: # global settings protocols = imap # "foo.server.org" is just descriptive name # settings inside server { .. } will override global ones. # groups (namespace, login settings, auth settings) aren't replaced # unless same name is used. server foo.server.org { imap_listen = 1.2.3.4 ssl_cert_file = /etc/ssl/certs/foo.cer # default namespace (no name) namespace { type = private mail = mbox:~/mail } # Have to quote so '#' won't be thought out as comment. # I think quoting should work everywhere actually.. namespace "#maildir" { type = private inbox = yes # this namespace contains INBOX mail = Maildir:~/Maildir } # override global auth default auth default { auth_mechanisms = plain digest-md5 auth_realms = foo.server.org auth_userdb = ldap /etc/dovecot-ldap.conf auth_passdb = ldap /etc/dovecot-ldap.conf } } server bar.server.org { imap_listen = 1.2.3.5 ssl_cert_file = /etc/ssl/certs/bar.cer namespace { type = private #mail = #autodetect } # shared mailboxes between users # eg. user/timo.sirainen/some-shared-folder namespace user { type = user mail = /home/%u/mail/shared } } server baz.server.org { imap_listen = 1.2.3.6 ssl_disable = yes # Only Courier-like INBOX namespace namespace INBOX { type = private } } # common namespace between all instances namespace shared { type = shared mail = mbox:/var/lists:INDEX=~/mail/.shared/ } auth default { auth_mechanisms = plain auth_userdb = passwd auth_passdb = pam }

1 1

[dovecot] Maildir plus mbox?
by wolfgang 24 Feb '03

24 Feb '03

is it possible with dovecot to have the inbox in Maildir format and additional imap folders in mbox format? regards, wolfgang

2 2