- dovecot - dovecot.org

doveadm protocol bug
by Felipe Gasper 08 Jun '20

08 Jun '20

Hi everyone, On 26th May I emailed this list a few times about an apparent protocol bug in Dovecot’s server-side doveadm implementation. Later that day I sent in a pull request to fix the issue. Thread reference: https://dovecot.org/pipermail/dovecot/2020-May/119066.html Pull request: https://github.com/dovecot/core/pull/129 Thus far neither the mailing list emails nor the PR have garnered any responses. Can someone please weigh in on these? It’s totally understandable if Dovecot’s behavior here is going to say as-is; I’d just like some confirmation so we can note it in our client implementation. (Switching our client to the HTTP API would be out-of-scope for our current project.) Thank you again! cheers, -Felipe Gasper

1 0

Can't share a mailbox
by Maxime DERCHE 08 Jun '20

08 Jun '20

Hello, I have a "notifs@" generic mail account, intended to receive technical monitoring messages. I need to share it with the people of the analyst team. I created a shared namespace, and enabled the modules. doveadm acl creates the dovecot-acl file but not the acl_shared_dict file. I guess something prevents it from doing it, but I fail to see what. It is a LDAP setup, and there is only one vmail (uid/gid 500) UNIX account to read and write the files on the file system. $ > doveadm acl add -u notifs(a)test.example.tld "shared/notifs(a)test.example.tld/INBOX" user=maxime.derche(a)test.example.tld :lrw $ > doveadm acl debug -u maxime.derche(a)test.example.tld "shared/notifs(a)test.example.tld/INBOX" doveadm(maxime.derche(a)test.example.tld): Info: Mailbox 'INBOX' is in namespace 'shared/notifs(a)test.example.tld/' doveadm(maxime.derche(a)test.example.tld): Info: Mailbox path: /var/vmail/test.example.tld/notifs/mail doveadm(maxime.derche(a)test.example.tld): Info: Per-user private flags in mailbox: \Seen doveadm(maxime.derche(a)test.example.tld): Info: User maxime.derche(a)test.example.tld has rights: lrw doveadm(maxime.derche(a)test.example.tld): Error: User maxime.derche(a)test.example.tld is missing 'lookup' right doveadm(maxime.derche(a)test.example.tld): Info: Mailbox shared/notifs(a)test.example.tld/INBOX is NOT visible in LIST /var/vmail/test.example.tld/notifs/mail/dovecot-acl: ---------------------------------------- user=maxime.derche(a)test.example.tld :lrw ---------------------------------------- dovecot -n ---------------------------------------- # 2.3.4.1 (f79e8e7e4): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.4 () # OS: Linux 4.19.0-9-amd64 x86_64 Debian 10.4 # Hostname: server.example.tld auth_debug = yes auth_mechanisms = plain login auth_verbose = yes lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes lmtp_save_to_detail_mailbox = yes mail_access_groups = vmail mail_debug = yes mail_gid = 5000 mail_location = maildir:~/Maildir mail_plugins = quota acl mail_privileged_group = mail mail_server_admin = mailto:postmaster@test.example.tld mail_shared_explicit_inbox = yes mail_uid = 5000 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext imapsieve vnd.dovecot.imapsieve namespace { list = children location = maildir:%%h/mail:INDEXPVT=~/mail/shared/%%u prefix = shared/%%u/ separator = / subscriptions = no type = shared } namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe autoexpunge = 30 days special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe autoexpunge = 30 days special_use = \Trash } prefix = separator = / } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile acl_shared_dict = file:/var/vmail/shared-mailboxes imapsieve_mailbox1_before = file:/etc/dovecot/sieve/learn-spam.sieve imapsieve_mailbox1_causes = COPY imapsieve_mailbox1_name = Junk imapsieve_mailbox2_before = file:/etc/dovecot/sieve/learn-ham.sieve imapsieve_mailbox2_causes = COPY imapsieve_mailbox2_from = Junk imapsieve_mailbox2_name = * recipient_delimiter = + sieve = file:~/sieve;active=~/.dovecot.sieve sieve_after = /etc/dovecot/sieve-after sieve_before = /etc/dovecot/sieve-before sieve_global_extensions = +vnd.dovecot.pipe sieve_pipe_bin_dir = /etc/dovecot/sieve sieve_plugins = sieve_imapsieve sieve_extprograms } protocols = " imap lmtp sieve" service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } ssl = required ssl_cert = </etc/ssl/certs/cert.pem ssl_cipher_list = HIGH:!ADH:!AECDH:!PSK:!KRB5:!RC4:!DES:!3DES:!MD5 ssl_client_ca_dir = /etc/ssl/certs ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it ssl_min_protocol = TLSv1.2 ssl_prefer_server_ciphers = yes userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap override_fields = home=/var/vmail/%d/%n } protocol lmtp { mail_plugins = quota acl sieve userdb { args = allow_all_users=yes uid=vmail gid=vmail home=/var/vmail/%d/%n mail=maildir:~/mail driver = static name = } } protocol imap { mail_plugins = quota acl imap_sieve imap_acl } ---------------------------------------- Does anyone see what I'm doing wrong here? Kind regards, -- Maxime DERCHE Information System Consulting France | NVMQVAM SOLVS https://www.mdisc.fr/ OpenPGP Key ID: 0x814E02A25697FD13 OpenPGP Key Fingerprint: 8B7B 60C9 1095 A198 C883 5205 814E 02A2 5697 FD13

1 0

Doveadm Backup issues
by Francis Augusto Medeiros-Logeay 07 Jun '20

07 Jun '20

Hi, I'm trying to use doveadm backup but I'm having a few issues. When trying locally: `doveadm backup -D -A maildir:/usr/local/backup` It results that no mailbox is separated by user - all seems to sync on the same folder, messing up with the folder structure of the original maildir. When trying remotely: `doveadm backup -D -A -N ssh -i mykey root@myremotebackup.com:/backup doveadmin dsync-server -A` I get this error line for each user: dsync-local(theuser(a)thedomain.com)<5DNrEXdG1l5tAgAAqsACHw>: Error: read(remote) failed: EOF (version not received) doveadm(theuser(a)thedomain.com): Fatal: execvp(ssh) failed: No such file or directory I'd be very thankful if someone could help me with this. Best, Francis -- Francis Augusto Medeiros-Logeay Oslo, Norway

3 5

Deliver administrative message ignoring user quota
by Peter Folta 07 Jun '20

07 Jun '20

Hi everyone, I have a separate internal system running on a different host that needs to put an administrative email into a user’s inbox. I’ve been playing around with the “doveadm mailbox save” command via Doveadm’s HTTP API (https://doc.dovecot.org/admin_manual/doveadm_http_api/#doveadm-mailbox-save <https://doc.dovecot.org/admin_manual/doveadm_http_api/#doveadm-mailbox-save>). This works quite well provided the user is within quota limit, however, I would like to be able to deliver these messages even if the email account is over quota. I noticed that it’s possible to override the quota configuration using dovecot-lda by overriding plugin/quota with the “noenforcing” directive as explained in https://wiki.dovecot.org/Quota/Configuration <https://wiki.dovecot.org/Quota/Configuration>. I don’t currently use LDA, SMTP servers based on Postfix deliver mail via LMTP and I need to be able to deliver this message from a different host in the network. The HTTP API doesn’t seem to support overriding the quota config. What would be the best way to go about this? Thanks Peter

2 2

(no subject)
by Stephen Blackwell 07 Jun '20

07 Jun '20

I want to disable the time penalty for dovecot imap authentication. When receiving a valid user-password combo the server responds in .04 seconds. When I send in an invalid comination it will either respond in 1.544 or 2.044 seconds += .002 I am using dovecot to test a program that sends a login request to a server and processes the response. I want to be able to send a series of valid and invalid login attempts. The issue is that with the 2 seconds delay for a bad login attempt, the tests are too slow to run in production I can see that the delay is defined in auth-penalty.h Is there a way, in the config file, to set AUTH_PENALTY_INIT_SECS = 0, or any other way to remove the time delay for an invalid login. I am running dovecot version 2.2.33.2 I am running without root permissions I do not want to make changes outside of the dovecot config file, password file, or run folder. -- Stephen

3 2

Cannot log in to IMAP server and logs are unclear as to why
by Scott A. Wozny 06 Jun '20

06 Jun '20

I’m trying a super basic config based upon https://wiki.dovecot.org/HowTo/PostfixDovecotLMTP but before I work on shipping mail through Postfix to DoveCot, I wanted to make sure IMAP is working first, but I can’t even get a basic login to so I thought I’d see if the gurus on the list might be able to point out I’m doing wrong. The documentation is pretty good, but there were some gaps I had to guess at and I’m presuming that’s where I went wrong. I’ve turned SELinux to permissive mode, for now. Here’s the doveconf -n: # 2.2.36 (1f10bfa63): /etc/dovecot/dovecot.conf # OS: Linux 3.10.0-1062.12.1.el7.x86_64 x86_64 CentOS Linux release 7.7.1908 (Core) # Hostname: imap first_valid_uid = 1000 listen = 192.168.1.207 mail_gid = vmail mail_home = /var/vmail/%d/%n mail_location = sdbox:~/mail mail_uid = vmail mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / } passdb { args = scheme=PLAIN username_format=%u /etc/dovecot/users driver = passwd-file } protocols = imap lmtp service lmtp { group = vmail unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } user = vmail } ssl = no ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = # hidden, use -P to show it userdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } I wasn’t sure how to set rights on the users file: [sawozny@imap var]$ cat /etc/dovecot/users test@test.com:{plain}test [sawozny@imap var]$ ls -la /etc/dovecot/users -rw-r--r--. 1 root root 26 Jun 3 23:31 /etc/dovecot/users Also, didn’t know what rights to set on the /var/vmail directoy so I did this: drwxrwx---. 3 vmail vmail 4096 Jun 3 20:52 vmail This directory is also empty except for the lost+fond directory that comes with a disk mount point. My understanding is that the mail home and maildir will manifest automagically on first login, but if I need to prime the pump, please let me know what I need to do. For my test, I did: [sawozny@imap var]$ telnet 192.168.1.207 143 Trying 192.168.1.207... Connected to 192.168.1.207. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready. 01 LOGIN test(a)test.com test 01 NO [UNAVAILABLE] Internal error occurred. Refer to server log for more information. Connection closed by foreign host. And the results in the /var/log/maillog file are: Jun 3 23:35:34 imap dovecot: auth: Error: passwd-file /etc/dovecot/users: User test(a)test.com is missing userdb info Jun 3 23:35:44 imap dovecot: auth: Error: passwd-file(test(a)test.com,192.168.1.207,<DBqafDan7ODAqAHP>): user not found from userdb Jun 3 23:35:44 imap dovecot: imap: Error: Authenticated user not found from userdb, auth lookup id=843055105 (auth connected 0 msecs ago, handshake 0 msecs ago, request took 0 msecs, client-pid=12047 client-id=1) Jun 3 23:35:44 imap dovecot: imap-login: Internal login failure (pid=12047 id=1) (internal failure, 1 successful auths): user=<test(a)test.com>, method=PLAIN, rip=192.168.1.207, lip=192.168.1.207, mpid=12049, secured, session=<DBqafDan7ODAqAHP> I’m not sure where I’ve gone wrong. From my understanding of the documentation, all I need in the userdb is name and password. UID, GID and HOME are also indicated as required, but I set them at the system level, so why is the system telling me the user was not found? This definitely isn’t my first rodeo with Linux, but I know almost nothing about messaging so in that regard I’m a totally n00b and would really appreciate some guidance. Thanks, Scott

3 5

Only show mails within 30 days or 60 days?
by hfh＠cndns.com 05 Jun '20

05 Jun '20

How to display emails within 30 days or 60 days in inbox, sent box, etc. For example, in the mail client tool, the user clicks the inbox button and only sees the mail within 30 days. The virtual mailbox plugin will only generate a new mailbox. Thank you！！！

4 3

manual mdbox lock
by rudolf＠padaru.de 05 Jun '20

05 Jun '20

Good Morning, i have a question about the mdbox dotlock technique. We create a new backup strategy for our mailservers because we want to switch the mailformat from mbox to mdbox. Our recent backup plan works mainly with rsync and the inbuild tar function. We want to hande the backups with mdbox similar. Is there a way, how i can write-lock a mail user via the doveadm command or with dotlock files? I have searched the doveadm-sync code but i cant make out the point where the command lock the mailbox for write access. We work with Ubuntu 18, dovecot 2.33.2 Mit freundlichen Grüßen Yours sincerely <https://padaru.de/> Pascal Rudolf | Geschäftsführer PADARU-IT | Bielebohstraße 10 | 02736 Beiersdorf @: rudolf(a)padaru.de | www: <http://padaru.de/> padaru.de mobil: +49 (0) 17 772 595 32

1 0

Mailbox & Server Down
by Andrea Miconi 04 Jun '20

04 Jun '20

My mailboxes are on a Dovecot (IMAP) server.On DNS there is an MX record pointing to the server.To read the mail I use Roundcube.If the server is down, I lose the new mail. I would like to do two things, alternatively. First option.1) I keeep the mail on the provider's server, restoring the original MX record.2) Dovecot does not receive the mail, but should go to download it.3) I can access the server with Roundcube to read the downloaded mail, but if the server is down I can always go to read the mail on the provider's server with its webmail Second optionI install a second mail server and the two have to replicate the mail.But I don't know how to do it, so I need a guide with instructions.Furthermore Roundcube would always access only one server and if this is down, how can I connect to the second one?This is a typical situation for webmail like Yahoo, Outlook or GMail, but I'm not Yahoo, Microsoft and Google ;) Thanks in advance for any advice.

5 7

Error deleting INBOX when doing an imap sync
by Des Magner 04 Jun '20

04 Jun '20

Hi I am trying to set up a new mail server with dovecot. I got it all installed and set up successfully but am running into problems trying to migrate from my current email server. I tried the following command: doveadm -Dv -o imapc_host=[current-imap-host] -o imapc_user=[current-user] -o imapc_password=[password] -o imapc_features=rfc822.size -o mail_fsync=never backup -R -u [user] imapc: It connects fine but eventually fails with the following errors: dsync([user]): Error: Mailbox INBOX sync: mailbox_delete failed: INBOX can't be deleted. dsync([user]): Debug: brain S: Remote mailbox tree: INBOX guid=[xxx] uid_validity=1591096439 uid_next=1 subs=no last_change=0 last_subs=0 dsync([user] Debug: imapc([current-imap-host]:143): Disconnected I am guessing the new INBOX is not compatible with the Inbox on my current mail server so it is trying to delete it. If so is there a way I can change my configuration to allow it to be deleted?

3 2