- dovecot - dovecot.org

Getting autoexpunge to work
by Philip Colmer 17 Mar '20

17 Mar '20

dovecot 2.2.33.2 (d6601f4ec) on Ubuntu 18.04 The recent announcement that expunge is going to be deprecated and that autoexpunge should be used instead reminded me that my recent switch over to autoexpunge is not working. There has been an active discussion today about getting expunge working so I thought I'd use the commands suggested there to figure out why autoexpunge might not be doing anything. "doveadm search -u local-finance-support mailbox INBOX savedbefore 12w" returns nothing even though the first email for that user is dated November 12th 2019. Using the message ID for that first email, I then tried this: doveadm search -u local-finance-support HEADER MESSAGE-ID "CAHgKB_f5ttC3kLgxgZiNzwyySvUfb-NXodqZ7K3+dkHKCOUwhg(a)mail.gmail.com" f55e9737e270c2564d1a0000e171d23e 37 then doveadm fetch -u local-finance-support "mailbox date.saved" UID 37 mailbox: INBOX date.saved: 2020-03-17 14:34:12 Why on earth is dovecot showing today's date for that message? What have I misunderstood or misconfigured? Regards Philip

2 2

doveadm expunge not expunging anymore
by mabi 17 Mar '20

17 Mar '20

Hello, I have migrated my mailbox server from Dovecot 2.1.7 (Debian 7) to Dovecot 2.3.4 (Debian 10) and have a crontab setup in root to daily delete all mails in the INBOX of a specific user which are older than 90 days like this: /usr/bin/doveadm expunge -u username\(a)domain.com mailbox INBOX savedbefore 90d Unfortunately this does not work anymore. I also tried to run the command manually as root which does not return any output or errors. Any idea why this command does not work anymore? Regards, Mabi

3 20

LDAP pass_filter seems to be not working
by Balázs Zeller 16 Mar '20

16 Mar '20

Hi, we are using dovecot --version: 2.3.9.3 (9f41b88fa) with LDAP integration Just discovered the the config which was working for a while is not working now. (we are constantly upgrading dovecot). we have smtp/imap/pop3/sieveEnabled field in our LDAP directory to control which user is able to use witch services. The pass filter was used for control the usage for years now with %LsEnabled filter (see below at config dump) We just discovered that this filter is not working anymore! We not even see any pass_filter queries in LDAP. We see user_filter queries but no pass_filter queries. Did we miss something in the changelog? *LDAP configuration:* grep -v '^ *$#.*$\?$' dovecot-ldap.conf.ext uris = ldap://ldap.services/ dn = cn=administrator,dc=top dnpass = ************ debug_level = 1 auth_bind = yes auth_bind_userdn = mail=%u,ou=service_mail,dc=top ldap_version = 3 base = ou=service_mail,dc=top deref = never scope = subtree user_attrs = mailQuota=quota_rule=*:bytes=%$,mailLocation=mail user_filter = (&(objectClass=customMail)(!(mailEnabled=FALSE))(mail=%u)) pass_attrs = =user=%{ldap:mail} pass_filter = (&(objectClass=customMail)(!(mailEnabled=FALSE))(mail=%u)(%LsEnabled=TRUE)) iterate_attrs = mail=user iterate_filter = (objectClass=demonMail) default_pass_scheme = SSHA *Dovecot main config:* dovecot -n # 2.3.9.3 (9f41b88fa): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.9 (db4e9a2f) # OS: Linux 4.19.87-1.ph3-esx x86_64 xfs # Hostname: 26feef366ef9 auth_cache_negative_ttl = 1 mins auth_cache_size = 10 M auth_cache_ttl = 1 mins auth_debug = yes auth_master_user_separator = * auth_mechanisms = login plain auth_verbose = yes default_vsz_limit = 512 M disable_plaintext_auth = no doveadm_api_key = # hidden, use -P to show it first_valid_gid = 901 first_valid_uid = 901 hostname = mail.****.** imap_client_workarounds = tb-extra-mailbox-sep imapc_features = rfc822.size fetch-headers imapc_host = x.x.x.x imapc_master_user = masteruser imapc_password = # hidden, use -P to show it imapc_user = %u last_valid_gid = 901 last_valid_uid = 901 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes mail_gid = 901 mail_home = /vmail/%d/%n/ mail_location = maildir:/vmail/%d/%n/ mail_plugins = " quota zlib trash fts fts_solr" mail_prefetch_count = 20 mail_privileged_group = mail mail_uid = 901 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / type = private } passdb { args = /etc/dovecot/master-users driver = passwd-file master = yes } passdb { args = /etc/dovecot/dovecot-ldap-userdb.conf.ext driver = ldap } plugin { fts = solr fts_autoindex = yes fts_solr = url=http://hostname:8983/solr/dovecot/ quota = dict:user::file:/vmail/%d/%n/dovecot.quota quota_exceeded_message = The quota of the recipient is full, please try it again later sieve = /vmail/%d/%n/dovecot.sieve sieve_dir = /vmail/.sieve/%u sieve_max_redirects = 20 trash = /etc/dovecot/dovecot-trash.conf.ext zlib_save = gz zlib_save_level = 6 } pop3_client_workarounds = outlook-no-nuls postmaster_address = postmaster(a)hostname.com protocols = imap pop3 lmtp sieve service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0660 user = vmail } } service doveadm { inet_listener http { port = 8099 } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } process_min_avail = 4 service_count = 0 vsz_limit = 2 G } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } service stats { unix_listener stats-reader { group = mail mode = 0666 user = } unix_listener stats-writer { group = mail mode = 0666 user = } } ssl_ca = </etc/ssl/certs/ca-certificates.crt ssl_cert = </ssl/cert.pem ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol lda { mail_plugins = " quota zlib trash fts fts_solr sieve quota zlib" } protocol imap { mail_max_userip_connections = 50 mail_plugins = " quota zlib trash fts fts_solr imap_quota zlib" } protocol pop3 { mail_plugins = " quota zlib trash fts fts_solr quota" } Regards Balazs

2 1

lmtp and recipient_delimiter
by Juri Haberland 16 Mar '20

16 Mar '20

Hi list, I have a small problem with recipient_delimiters contained in usernames. Recently I have extended recipient_delimiter from "+" to "+-" in both Postfix and Dovecot (using lmtp) and now any user that have a '-' in it's username can't receive mail anymore, because lmtp truncates the localpart after the '-' and of course can't find the first half in the user database. To illustrate: given an account "foo-bar(a)example.com", I get the following log entry from postfix: Mar 9 09:31:43 batleth postfix/lmtp[6196]: 9A7BA33E005B: to=<foo-bar(a)example.com>, relay=batleth.sapienti-sat.org[private/dovecot-lmtp], delay=20, delays=20/0.01/0.01/0.08, dsn=5.1.1, status=bounced (host batleth.sapienti-sat.org[private/dovecot-lmtp] said: 550 5.1.1 <foo-bar(a)example.com> User doesn't exist: foo(a)example.com (in reply to RCPT TO command)) Is there any way to tell lmtp to first look for <user><delimiter><extension> and if that fails look for <user> only (the reverse order would be ok, too)? Thanks in advance, Juri doveconf -n: # 2.3.10 (0da0eff44): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.10 (bf8ef1c2) # OS: Linux 4.4.0-174-generic x86_64 Ubuntu 16.04.6 LTS ext4 # Hostname: batleth.sapienti-sat.org auth_default_realm = sapienti-sat.org first_valid_uid = 115 imap_idle_notify_interval = 29 mins last_valid_uid = 115 mail_location = maildir:/srv/vmail/%Ld/%Ln managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { autoexpunge = 180 days special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { autoexpunge = 365 days special_use = \Trash } prefix = INBOX. separator = . } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { sieve = file:~/sieve;active=~/.dovecot.sieve } protocols = " imap lmtp sieve" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service imap-login { inet_listener imap { address = 127.0.0.1 ::1 } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } service pop3-login { inet_listener pop3 { port = 0 } } ssl_cert = </etc/letsencrypt/live/sapienti-sat.org/fullchain.pem ssl_cipher_list = EDH+CAMELLIA:EDH+aRSA:EECDH+aRSA+AESGCM:EECDH+aRSA+SHA384:EECDH+aRSA+SHA256:EECDH:+CAMELLIA256:+AES256:+CAMELLIA128:+AES128:+SSLv3:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!DSS:!RC4:!SEED:!ECDSA:CAMELLIA256-SHA:AES256-SHA:CAMELLIA128-SHA:AES128-SHA ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it ssl_prefer_server_ciphers = yes userdb { args = uid=postfix gid=postfix home=/srv/vmail/dovecot_state/%Ld/%Ln driver = static } protocol lmtp { auth_username_format = %Lu mail_plugins = " sieve" } protocol imap { mail_max_userip_connections = 20 }

6 10

RE: Not works URL
by Tuomi, Aki 15 Mar '20

15 Mar '20

I added redirect for missing urls Aki -------- Original message --------From: Remo Mattei <rm(a)rm.ht> Date: 15/03/2020 19.04 (GMT+02:00) To: Olgerdas <olgerdas(a)balinskis.lt> Cc: dovecot(a)dovecot.org Subject: Re: Not works URL It works from my side. > Il giorno 15 mar 2020, alle ore 04:08, Olgerdas <olgerdas(a)balinskis.lt> ha scritto:> > Hi,> URL not reachable: https://doc.dovecot.org/plugin-settings/acl/> > -- > Pagarbiai,> Olgerdas Balinskis> https://www.balinskis.lt

1 0

Not works URL
by Olgerdas 15 Mar '20

15 Mar '20

Hi, URL not reachable: https://doc.dovecot.org/plugin-settings/acl/ -- Pagarbiai, Olgerdas Balinskis https://www.balinskis.lt

2 1

RE: Not works URL
by Tuomi, Aki 15 Mar '20

15 Mar '20

It has been changed recently. See https://doc.dovecot.org/settings/plugin/aclPlugins/AkiSent from my Samsung Galaxy smartphone. -------- Original message --------From: Olgerdas <olgerdas(a)balinskis.lt> Date: 15/03/2020 13.07 (GMT+02:00) To: dovecot(a)dovecot.org Subject: Not works URL Hi,URL not reachable: https://doc.dovecot.org/plugin-settings/acl/-- Pagarbiai,Olgerdas Balinskishttps://www.balinskis.lt

1 0

Catchall with UserDB?
by Ferenc 15 Mar '20

15 Mar '20

Hi! I've set up Postfix with virtual users. I wanted to get Dovecot and LMTP up and running with Passwd-file UserDB, which they do, but I can't figure out how to make use of a catch-all. Currently, mail to joe(a)example.com needs Joe to be in the Passwd-file. I would like anyone(a)example.com to go to Joe's mailbox, or actually mail to @example.com should go to Joe. But what do I put in the Passwd-file? I need this for several domains. Like @somedomain.org should go to jim(a)example.com and @anydomain.net to jake(a)example.com. I've googled myself silly but I cannot find the it. Everybody is hooked on a sql userdb which seems like overkill to me. With Postfix doing local delivery this is rather trivial. With Dovecot LDA I got it working by using virtual_alias_maps and the right parameters in master.cf. But with LMTP I'm stumped. cheers, Ferenc

2 2

imap-hibernate won't start
by Webservice 14 Mar '20

14 Mar '20

I can't get imap-hibernate to fire up. The process is not starting, and there are no clues in the logs. I tried several users/groups, but nothing happens (although I see plenty of IDLE imap-connections). Even mode 0666 didn't work. I'm on Slackware (no FreeBSD), built from source with ./configure --with-mysql My systems runs with a virtual user, and imap-processes are run under vmail vmail 21840 0.0 0.0 14076 2596 ? S 01:11 0:00 dovecot/imap vmail 21842 0.0 0.0 14108 2568 ? S 01:11 0:00 dovecot/imap I see the socket in var/run/dovecot with OK-permissions: srw-rw---- 1 vmail dovecot 0 Mar 14 01:11 imap-hibernate= Added in my config: mail_debug = yes verbose_proctitle=yes service imap { unix_listener imap-master { user = $default_internal_user } } service imap { extra_groups = $default_internal_group } service imap-hibernate { unix_listener imap-hibernate { user = vmail mode = 0660 group = $default_internal_group } } Can someone give me a clue where it's going wrong? Or an option so I can debug?

2 2

Pigeonhole v0.5.10 release notes
by Aki Tuomi 11 Mar '20

11 Mar '20

Hi! We made a mistake of releasing pigeonhole with wrong release notes, so please find the correct release notes here. Also if you are using `--without-dovecot-install-dirs`, you must use `--with-moduledir`. Otherwise the Makefile gets broken. v0.5.10 2020-03-06 Aki Tuomi <aki.tuomi(a)open-xchange.com> * imap_sieve_filter: Change result action logging to include IMAP UID - vacation: Addresses were compared case-sensitively. Aki Tuomi

1 0