- dovecot - dovecot.org

Different Replicator Crash??
by Kent Borg 10 Feb '25

10 Feb '25

I added the suggested "count--" and recompiled, and it now appears to work, the replication goes both ways, eyeballing the e-mail on the two servers they look the same. Good. But part of the time I am still getting what looks very much like the same crash, is there another "count--" I need to add to that file? > Jan 28 10:53:08 la dovecot[96175]: replicator: Panic: data stack: Out > of memory when allocating 268435496 bytes > Jan 28 10:53:08 la dovecot[96175]: replicator: Error: Raw backtrace: > #0 t_askpass[0x7fb404b0c0] -> #1 backtrace_append[0x7fb404b374] -> #2 > backtr\ > ace_get[0x7fb404b510] -> #3 execvp_const[0x7fb4057ba4] -> #4 > i_syslog_fatal_handler[0x7fb4058510] -> #5 i_panic[0x7fb3fa6808] -> #6 > t_pop_pass_st\ > r[0x7fb4050eb4] -> #7 connection_deinit[0x7fb4056430] -> #8 > pool_datastack_create[0x7fb407e7b0] -> #9 > array_bsearch_insert_pos_i[0x7fb40446d0] ->\ > #10 t_base64_scheme_decode[0x7fb404cb24] -> #11 > buffer_append[0x7fb404d3d0] -> #12 replicator_queue_push[0x558c4b4f40] > -> #13 replicator_brain_i\ > nit[0x558c4b53e4] -> #14 _start[0x558c4b3d70] -> #15 > _start[0x558c4b3f04] -> #16 io_loop_call_io[0x7fb4072f20] -> #17 > io_loop_handler_run_interna\ > l[0x7fb4075450] -> #18 io_loop_handler_run[0x7fb4075680] -> #19 > io_loop_run[0x7fb4075944] -> #20 master_service_run[0x7fb3fd84b0] -> > #21 main[0x5\ > 58c4b3930] -> #22 __libc_init_first[0x7fb3dd76d0] -> #23 > __libc_start_main[0x7fb3dd7780] -> #24 _start[0x558c4b3b80] > Jan 28 10:53:08 la dovecot[96175]: replicator: Fatal: master: > service(replicator): child 96714 killed with signal 6 (core dumps > disabled - https:\ > //dovecot.org/bugreport.html#coredumps) Thanks, -kb

4 4

crash on authentication to 2.3.21
by Eugene M. Zheganin 09 Feb '25

09 Feb '25

Hello, I'm trying to move a dovecot mail server from a remote Cpanel VPS to my site. I've set up the dovectot to my knowledge, but as soon as I try to authenticate, I got a crash: ===Cut=== Feb 9 11:15:12 freebsd dovecot[89257]: imap-login: Login: user=<gluck(a)kimlab.link>, method=CRAM-MD5, rip=92.255.139.77, lip=49.12.36.80, mpid=545, session=<O6+RtLMt1iBc/4tN> Feb 9 11:15:12 freebsd dovecot[89257]: imap(gluck(a)kimlab.link)<545><O6+RtLMt1iBc/4tN>: Panic: file array.c: line 10 (array_idx_modifiable_i): assertion failed: (idx < array->buffer->used / array->element_size) Feb 9 11:15:12 freebsd dovecot[89257]: imap(gluck(a)kimlab.link)<545><O6+RtLMt1iBc/4tN>: Fatal: master: service(imap): child 545 killed with signal 6 (core not dumped - https://dovecot.org/bugreport.html#coredumps) ===Cut=== Thhe only reference I've fount to this error is that it seems to be an issue in 2.3.17, but I have 2.3.21 version, so I think there's something in my config. I've also hhave a bunch of old maildirs and I tried to do a force-resync on 'em, but that didn't help. Here's my config: ===Cut=== # 2.3.21.1 (d492236fa0): /usr/local/etc/dovecot/dovecot.conf # Pigeonhole version 0.5.21.1 (49005e73) # OS: FreeBSD 14.2-RELEASE amd64 # Hostname: mail.kimlab.link auth_debug = yes auth_debug_passwords = yes auth_mechanisms = plain login cram-md5 scram-sha-1 scram-sha-256 default_client_limit = 40963 default_process_limit = 10240 disable_plaintext_auth = no first_valid_gid = 143 first_valid_uid = 143 hostname = mail.kimlab.link mail_gid = 143 mail_home = /var/imap/%d/%n mail_location = maildir:~/ mail_uid = 143 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext mbox_write_locks = fcntl namespace { inbox = yes list = yes location = prefix = separator = / subscriptions = yes type = private } namespace { location = maildir:/var/imap/%d/public prefix = Public/ separator = / subscriptions = no type = public } namespace { list = children location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u prefix = shared/%%u/ separator = / subscriptions = no type = shared } passdb { args = scheme=PLAIN username_format=%u /usr/local/etc/dovecot/users driver = passwd-file master = yes pass = yes } plugin { acl = vfile acl_shared_dict = file:/var/db/dovecot/shared-mailboxes fts = squat fts_autoindex = yes fts_squat = partial=4 full=10 quota = maildir:User quota quota_rule = *:storage=50G quota_rule2 = Trash:storage=+10%% quota_rule3 = Spam:storage=+20%% quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = ~/.dovecot.sieve sieve_after = /var/imap/sieve/sieve-after sieve_before = /var/imap/sieve/sieve-before/spam.sieve sieve_default = /var/imap/sieve/default.sieve sieve_dir = /var/imap/%d/%n/sieve sieve_global_dir = /var/imap/sieve sieve_max_script_size = 1M } postmaster_address = postmaster(a)kimlab.link protocols = imap pop3 lmtp sieve service auth { client_limit = 62464 unix_listener /var/imap/private/auth { group = dovecot mode = 0660 user = dovecot } unix_listener auth-userdb { group = dovecot mode = 0660 user = dovecot } } service imap-login { client_limit = 10000 inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } process_limit = 10240 process_min_avail = 1 service_count = 0 vsz_limit = 512 M } service imap { drop_priv_before_exec = yes process_limit = 10240 } service lmtp { unix_listener lmtp { group = dovecot mode = 0660 user = dovecot } } service managesieve-login { inet_listener sieve { port = 4190 } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = dovecot } user = dovecot } service stats { unix_listener stats-writer { group = dovecot mode = 0660 user = dovecot } } ssl_cert = </usr/local/etc/nginx/tls.d/kimlab.link.pem ssl_key = # hidden, use -P to show it syslog_facility = local6 userdb { args = username_format=%u /usr/local/etc/dovecot/users default_fields = uid=dovecot gid=dovecot home=/var/imap/%d/%n driver = passwd-file } protocol lmtp { mail_plugins = " quota acl sieve" } protocol lda { mail_plugins = " quota acl sieve" } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep mail_max_userip_connections = 512 mail_plugins = quota imap_quota fts fts_squat } ===Cut=== here's my obfuscated users passdb file: ===Cut=== gluck@kimlab.link:{PLAIN}XXXXXXXXX:::::: emz@kimlab.link:{PLAIN}XXXXXXXXX:::::: ===Cut=== I'm totally open to any ideas. I can provide coredumps as well, but I tend to think that's something obvious since I have very little experience with dovecot. Thanks. Eugene.

2 1

suggestion: Argon2id example in `doveadm pw` examples
by Sean McBride 09 Feb '25

09 Feb '25

Hi all, It says here https://www.dovecot.org/bugreport-mail/ that bug reports should go to this list. Does that apply to suggestions too? Assuming so... The docs here are very good: https://doc.dovecot.org/main/core/man/doveadm-pw.1.html but it's always nice to have examples of current best practice. As I understand it, the best password hashing algorithm these days is Argon2id, according to: https://cheatsheetseries.owasp.org/cheatsheets/Password_Storage_Cheat_Sheet… So it would be nice to have an example corresponding to best practices, showing use of argon2id. I could attempt a PR on GitHub if you'd like. Cheers, Sean

1 0

how to set pop3_deleted_flag for one mailbox (email address)?
by krzf83＠gmail.com 08 Feb '25

08 Feb '25

How to set pop3_deleted_flag for one (email address)? I've tried using extra_fields in userdb. pop3_deleted_flag seems to be ignored there. It makes no sense for pop3_deleted_flag be to be global setting and yet it seems to be so.

2 2

Writing custom sieve plugins and extensions
by mb-dovecot＠mailroom.meme 08 Feb '25

08 Feb '25

I am a pretty heavy user of Sieve, and one of the services where I have extensive Sieve scripts is Protonmail. For my own mailserver setup, Dovecot's sieve-test has been excellent. I have a library of example email messages, and my own tooling setup for being able to test whether a given change has broken anything else unintentionally. If it does, I can trace the decision tree. With protonmail this has severe limitations. Most of those scripts apply expire, and what the expire is can change as it passes through the filters. But I cannot test any of that with sieve-test because that extension is unique to them. I always have to strip it out of sieve first, and that doesn't help me understand what's happening. I have some software engineering experience, so I was poking around at the pigeonhole source code, but since it's really focused on the RFC (understandably) there doesn't seem to be a friendly on-ramp to creating a one-off extension. What I'd really like to do though is make some kind of custom extension to sieve-test specifically which would allow the user to define custom vendor plugins/modules and appropriate messages. After all, I don't need sieve-test to know how to expire a message, I just need it to not throw an error on the extension when it's loaded, and to inform me in the output that it would have applied the expire action to a given message with a given value. I suspect the easiest way to do that is with a stubbed out extension that can handle that, but I'm open to other approaches that might work.

2 1

Dovecot 2.4 quota_storage_size override from userdb not working
by Andreas Oster 06 Feb '25

06 Feb '25

Hello, I am currently trying to migrate my Dovecot 2.3 server to version 2.4. Unfortunately I do not seem to get the basic per user quota to work. I am using LDAP for userdb and have used the "Override: LDAP" example from https://doc.dovecot.org/2.4.0/core/plugins/quota.html as a starting point. ( By the way, there is an error in the example: % is missing in front of "{ldap:quotaBytes}B" ) I have set the LDAP field according to my setup and validated with "doveadm auth test username" that the correct value is returned. In my case I get "quota_storage_size=3G" but this does not override the default value of 1G from the global quota config file: quota "User quota" { storage_size = 1G } Can someone please help with this issue ? Thank you very much. -- Best regards Andreas Oster

1 0

question from a newbie
by Zane B Stein 06 Feb '25

06 Feb '25

My mail was hosted by a site that no longer handles email. I asked them if they could send me a file with all my emails in it and they said sure. I was thinking maybe I would get something I could import into Outlook such as a .pst or .ost file, or perhaps a .csv file. What I received was a zipped file and when I opened it there were a bunch of folders with emails in them in some strange format (each one with a . in front of it, such as .NEWMAIL ), plus a bunch of files along with the folders such as dovecat.index, dovecatindex.cache, dovecot.index.log2, dovecot.list.inex, divecot.mailbox and others with a dovecot prefix, plus one called maildirsize and one called subscriptions. I have no idea how to read the emails in this format. Can someone tell me how I can access the emails in this set of files? Feel free to ask if you need more information before you can answer. If I need a special program to read the files, is there an easy one available that is user friendly for someone with no experience with dovecot files? Thank you. Zane B Stein

5 7

solved my problem
by Zane B Stein 06 Feb '25

06 Feb '25

In my initial post I questioned, as a newbie, how to access the email files I was given that were in dovecot format, and a few people were kind enough to explain things to me a bit. But some of the solutions were a bit over my head. And then I found a solution. I downloaded an app called "SysTools Maildir Converter" and was able to convert the whole email file into a .pst file, and input it in Outlook. Now all my emails are accessible, and I can reply to them like any other emails in Outlook. The only thing I don't exactly understand is that each folder I had with emails in it has a subfolder called "cur" and that is where all the emails reside. It is not an issue, just not sure exactly why that is so. (If someone has an idea why the emails are in "cur" subfolders rather than directly in the folders, and can explain it to me without getting super technical, that would be great. But it isn't a big deal, I'm just curious.) Zane

2 1

Replicator Crash
by Kent Borg 06 Feb '25

06 Feb '25

I have replicator working well enough…to crash: > Jan 28 11:26:12 la dovecot[1187]: replicator: Panic: data stack: Out > of memory when allocating 268435496 bytes > Jan 28 11:26:12 la dovecot[1187]: replicator: Error: Raw backtrace: #0 > t_askpass[0x7fa59db0c0] -> #1 backtrace_append[0x7fa59db374] -> #2 > backtra\ > ce_get[0x7fa59db510] -> #3 execvp_const[0x7fa59e7ba4] -> #4 > i_syslog_fatal_handler[0x7fa59e8510] -> #5 i_panic[0x7fa5936808] -> #6 > t_pop_pass_str\ > [0x7fa59e0eb4] -> #7 connection_deinit[0x7fa59e6430] -> #8 > pool_datastack_create[0x7fa5a0e7b0] -> #9 > array_bsearch_insert_pos_i[0x7fa59d46d0] -> \ > #10 t_base64_scheme_decode[0x7fa59dcb24] -> #11 > buffer_append[0x7fa59dd3d0] -> #12 replicator_queue_push[0x556e8f4f40] > -> #13 replicator_brain_in\ > it[0x556e8f53e4] -> #14 _start[0x556e8f3d70] -> #15 > _start[0x556e8f3f04] -> #16 io_loop_call_io[0x7fa5a02f20] -> #17 > io_loop_handler_run_internal\ > [0x7fa5a05450] -> #18 io_loop_handler_run[0x7fa5a05680] -> #19 > io_loop_run[0x7fa5a05944] -> #20 master_service_run[0x7fa59684b0] -> > #21 main[0x55\ > 6e8f3930] -> #22 __libc_init_first[0x7fa57676d0] -> #23 > __libc_start_main[0x7fa5767780] -> #24 _start[0x556e8f3b80] > Jan 28 11:26:12 la dovecot[1187]: replicator: Fatal: master: > service(replicator): child 1185 killed with signal 6 (core dumps > disabled - https://\ > dovecot.org/bugreport.html#coredumps) This is on Debian 12. > # dovecot --version > 2.3.19.1 (9b53102964) There are gigabytes of free RAM, though it says it is trying to allocate 268,435,496 bytes--on the stack--and that does seem wrong in any case. The Maildir being synced is over 430MB, is that too much for dsync?? Suggestions? Thanks, -kb

3 4

iOS email content loading issue
by Zieseniss Peter 06 Feb '25

06 Feb '25

Hello All, i hope everyone is well! i have a rather irksome and pressing issue that i can't seem to resolve.. This happens only on iOS devices.. Specifically, the problem is that the content of messages seems to timeout when it loads either when you open a message, or when you hit reply or forward, or whatever.. The email appears to load, but the content simply never shows up, leaving only a wheel that says 'Loading' Please see a screenshot of what it looks like: https://zconsulting.net/_stuff/dovecot-ios-loading.jpg This happens on all iOS devices (at least 18), many different versions from the most current down to iOS 16.. This has been happening for at least 2 years, and it happens about 50-80% of the time when interacting with an older message (more than 6 months old) Mail on macOS, Thunderbird on Windows, and RoundCube on the server all work perfectly.. Note that most of these accounts have at between 12GB and 80GB (that's the extreme case) of email.. The server is: Dedicated 4-Core Xeon, 16GB RAM, 512GB NVMe SSD AlmaLinux release 8.10 (Cerulean Leopard) Dovecot 2.3.21.1 Exim 4.98 Here's what i've tried: On the server, i installed FTS-Xapian On the server, i set mail_max_userip_connections=512 On the clients, i disabled all email privacy settings and disabled iCloud mail The problem is that i really can't figure out what the issue is, but this seems to be a very common issue between Dovecot and iOS, judging by the amount of similar questions i see on g00gle, but no useful answers (example here <https://dovecot.org/mailman3/archives/list/dovecot@dovecot.org/thread/6YCEV…>).. It certainly seems like the iOS mail client is timing out when receiving the body of these older messages, but i don't see anything useful in the logs.. Please help! Any suggestions are welcome! My client is about to crucify me over this.. Thank You All in advance! Sincerely, Peter -- Peter Zieseniss Principal https://www.zconsulting.net peter(a)zconsulting.net

3 2