- dovecot - dovecot.org

Re: Cannot connect to Dovecot IMAP or POP
by Joseph Tam 05 May '16

05 May '16

> 2. openssl s_client -connect mail.privustech.com:xxx > a. xxx=25, 110, 143 all return > error:140770FC You need to add the "-starttls protocol" parameter, otherwise "openssl s_client" thinks your using SSL, not STARTTLS i.e. openssl s_client -starttls pop3 -connect mail.privustech.com:110 openssl s_client -starttls imap -connect mail.privustech.com:143 But even if you do that, you get the same error because it can't start the TLS session: $ nc mail.privustech.com 143 * OK [CAPABILITY IMAP4REV1 I18NLEVEL=1 LITERAL+ SASL-IR LOGIN-REFERRALS STARTTLS LOGINDISABLED AUTH=CRAM-MD5] privustech.com IMAP4rev1 2007e.404 at Wed, 4 May 2016 22:26:36 -0400 (EDT) x STARTTLS x NO Server certificate not installed So there you go, dovecot can't get at your server certificate. You can start the search of your problem from there. The configuration verbose_ssl = yes will help to log the problem. > ssl_dh_parameters_length = 2048 Probably not related to your problem, but this will cause wildly variable dovecot initialization times, as temp key generation of this length can result in a lot of candidate primailty testing. Joseph Tam <jtam.home(a)gmail.com>

2 1

Changing Password Schemes
by Carl A Jeptha 03 May '16

03 May '16

Good Day, I have been following this tutorial without much luck - http://wiki2.dovecot.org/HowTo/ConvertPasswordSchemes#CA-26af2b83a43b810052… It is obvious to me that I am not following the instructions correctly and need to be shown what I am misunderstanding. I have an old postfix + dovecot + Roundcube mailserver (mail.domain.Tld). Server clock is loosing time and adjusting it causes dovecot to kill itself, we cannot install more memory, bigger hard-drives, etc. I have built a new server box (mail2.domain.Tld) With Postfix + dovecot + Roundcube. This server is functioning, with a client's new domain, and my personal domain. it's password system is SHA512-CRYPT. I have imported the users from the old server over to the new server. I have created a new column "plain_pass" for the plain passwords. I will be using imapsync to transfer the mail folders from the one server to the other, but will not proceed until I fix this issue. # 2.2.18: /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.8 (0c4ae064f307+) # OS: Linux 4.2.0-35-generic x86_64 Ubuntu 15.10 ext4 auth_mechanisms = plain login first_valid_gid = 8 first_valid_uid = 150 last_valid_gid = 8 last_valid_uid = 150 listen = * mail_gid = mail mail_location = maildir:/var/vmail/%d/%n mail_uid = vmail namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { quota_grace = 10%% quota_rule = *:storage=1G quota_rule2 = Trash:storage=+100M quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u } postmaster_address = postmaster(a)airnet.ca protocols = imap pop3 lmtp lmtp pop3 service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { group = mail mode = 0666 user = vmail } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } service imap-postlogin { executable = script-login /usr/local/etc/popafter.sh user = $default_internal_user } service imap { executable = imap imap-postlogin } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } service pop3-postlogin { executable = script-login /usr/local/etc/popafter.sh user = $default_internal_user } service pop3 { executable = pop3 pop3-postlogin } ssl_cert = </etc/ssl/certs/ssl-cert-snakeoil.pem ssl_cipher_list = ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-AES256-GCM-SHA384:DHE-RSA-AES128-GCM-SHA256:DHE-DSS-AES128-GCM-SHA256:kEDH+AESGCM:ECDHE-RSA-AES128-SHA256:ECDHE-ECDSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:ECDHE-ECDSA-AES128-SHA:ECDHE-RSA-AES256-SHA384:ECDHE-ECDSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-ECDSA-AES256-SHA:DHE-RSA-AES128-SHA256:DHE-RSA-AES128-SHA:DHE-DSS-AES128-SHA256:DHE-RSA-AES256-SHA256:DHE-DSS-AES256-SHA:DHE-RSA-AES256-SHA:AES128-GCM-SHA256:AES256-GCM-SHA384:AES128-SHA256:AES256-SHA256:AES128-SHA:AES256-SHA:AES:CAMELLIA:DES-CBC3-SHA:!aNULL:!eNULL:!EXPORT:!DES:!RC4:!MD5:!PSK:!aECDH:!EDH-DSS-DES-CBC3-SHA:!EDH-RSA-DES-CBC3-SHA:!KRB5-DES-CBC3-SHA ssl_dh_parameters_length = 2048 ssl_key = </etc/ssl/private/ssl-cert-snakeoil.key ssl_prefer_server_ciphers = yes ssl_protocols = !SSLv2 !SSLv3 userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } -- ------------ You have a good day now, en mag jou môre ook so wees, Carl A Jeptha

9 35

Director ignores nologin, reason etc.
by Tom Sommer 03 May '16

03 May '16

I want my director to do all authentication, but it ignores the nologin and reason etc. fields returned by my director password_query I have my director password_query returning proxy=y, password=X, master=XXXX, pass=XXXX It works fine, but even if nologin is Y and 'reason' is set, the user still gets proxied to the backend and gets to login? -- Tom

1 0

Re: %{domain} (or %d) is empty
by Robban 02 May '16

02 May '16

Hi again! I manage to solve this by removing the option auth_username_translation. The reason I wanted to have auth_username_translation was to be able to let sieve handle <mail-attribute><auth_username_translation><extension> Is this possible with other configuration options? //Robban ----- Forwarded message from Robban <dovecot(a)netnerdz.se> ----- Date: Mon, 2 May 2016 20:15:48 +0200 From: Robban <dovecot(a)netnerdz.se> To: dovecot(a)dovecot.org Subject: %{domain} (or %d) is empty User-Agent: Mutt/1.5.21 (2010-09-15) Hi all! I have two userdb's, for one of them it's ldap based and the 2nd one is static. I want mail to ldap-users to be saved in /home/vmail/<username>/Maildir So far so good. Now I want mail to non-existent users to be placed in /home/vmail/<domain.tld>/Maildir (notice the double-slashes that indicate that %d is empty): # doveadm user publicfolder(a)vendelso.se rs(a)netnerdz.se field value uid 500 gid 500 home /home/vmail// mail maildir:/home/vmail//Maildir/ uid vmail gid vmail home /home/vmail/rs mail maildir:/home/vmail/rs uidNumber 500 gidNumber 500 And here's my configuration files: # cat /etc/dovecot/dovecot-ldap.conf.ext hosts = 172.20.202.60 dn=uid=dovecot,cn=sysaccounts,cn=etc,dc=netnerdz,dc=se dnpass=<suppressed> auth_bind = yes auth_bind_userdn = uid=%u,cn=users,cn=accounts,dc=netnerdz,dc=se ldap_version = 3 base = cn=accounts,dc=netnerdz,dc=se deref = never scope = subtree user_filter = (&(objectClass=posixAccount)(mail=%u@*)) user_attrs = \ =user=%{ldap:uid}, \ =home=/home/vmail/%{ldap:uid}, \ =mail=maildir:/home/vmail/%{ldap:uid}, \ =uidNumber=500, \ =gidNumber=500 pass_filter = (&(objectClass=posixAccount)(mail=%u@*)) pass_attrs = uid=user,userPassword=password # dovecot -n # 2.2.10: /etc/dovecot/dovecot.conf # OS: Linux 3.10.0-327.10.1.el7.x86_64 x86_64 CentOS Linux release 7.2.1511 (Core) auth_mechanisms = login gssapi plain auth_socket_path = /var/run/dovecot/auth-userdb auth_username_format = %n auth_username_translation = -@.@/@_@ auth_verbose = yes base_dir = /var/run/dovecot/ imap_id_log = * imap_id_send = name imap_urlauth_host = * import_environment = TZ lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes lda_original_recipient_header = X-Original-To lmtp_save_to_detail_mailbox = yes login_greeting = IMAPd ready. login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c mail_access_groups = vmail mail_attachment_hash = %{sha256} mail_debug = yes mail_gid = vmail mail_location = maildir:~/Maildir mail_log_prefix = "%s(%u)::%n: " mail_plugins = acl virtual mail_privileged_group = vmail mail_shared_explicit_inbox = yes mail_uid = vmail mailbox_list_index = yes maildir_broken_filename_sizes = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mmap_disable = yes namespace NetnerdzSE { list = yes location = maildir:/home/vmail/netnerdz.se/:INDEX=/home/vmail/%u/public prefix = NetnerdzSE/ separator = / subscriptions = yes type = public } namespace Shared { list = children location = maildir:/home/vmail/%%n/Maildir/:INDEX=/home/vmail/%n/shared/%%u prefix = Shared/%%n/ separator = / subscriptions = yes type = shared } namespace VendelsöSE { list = yes location = maildir:/home/vmail/xn--vendels-g1a.se/:INDEX=/home/vmail/%u/public prefix = VendelsöSE/ separator = / subscriptions = yes type = public } namespace VendelsoSE { list = yes location = maildir:/home/vmail/vendelso.se/:INDEX=/home/vmail/%u/public prefix = VendelsoSE/ separator = / subscriptions = yes type = public } namespace inbox { hidden = no inbox = yes list = yes location = mailbox Archive { auto = subscribe special_use = \Archive } mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = / subscriptions = yes type = private } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile:/home/vmail/dovecot-acl acl_shared_dict = file:/home/vmail/shared-mailboxes.db mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size sieve = /home/vmail/%u/dovecot.sieve sieve_default = /etc/dovecot/default.sieve sieve_default_name = roundcube sieve_dir = /home/vmail/%u/sieve sieve_global_dir = /etc/dovecot/sieve/global.sieve sieve_global_path = /etc/dovecot/sieve/global.sieve sieve_max_actions = 0 sieve_max_redirects = 4 sieve_max_script_size = 0 } postmaster_address = postmaster@%d protocols = imap lmtp sieve service auth-worker { user = root } service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } unix_listener auth-client { group = postfix mode = 0660 user = postfix } unix_listener auth-master { group = vmail mode = 0660 user = vmail } unix_listener auth-userdb { group = mode = 0666 user = } user = $default_internal_user } service dict { unix_listener dict { group = mail mode = 0600 user = mail } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } process_min_avail = 0 service_count = 1 vsz_limit = 256 M } service imap { process_limit = 1024 vsz_limit = 256 M } service lmtp { inet_listener lmtp { address = 127.0.0.1 port = 24 } unix_listener lmtp { mode = 0666 } } service managesieve-login { inet_listener sieve { port = 4190 } } ssl = required ssl_ca = </etc/dovecot/dovecot-ca.crt ssl_cert = </etc/dovecot/imap.netnerdz.se.crt ssl_client_ca_file = /etc/pki/tls/cert.pem ssl_key = </etc/dovecot/imap.netnerdz.se.key ssl_prefer_server_ciphers = yes submission_host = 127.0.0.1:25 userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } userdb { args = uid=500 gid=500 home=/home/vmail/%{domain}/ allow_all_users=yes driver = static override_fields = mail=maildir:/home/vmail/%d/Maildir/ result_failure = return-ok skip = found } valid_chroot_dirs = /home/vmail verbose_proctitle = yes protocol sieve { disable_plaintext_auth = yes info_log_path = /var/log/dovecot/dovecot-sieve.log log_path = /var/log/dovecot/dovecot-sieve-errors.log managesieve_implementation_string = dovecot managesieve_max_line_length = 65536 } protocol lda { auth_socket_path = /var/run/dovecot/auth-master info_log_path = /var/log/dovecot/dovecot-lda.log log_path = /var/log/dovecot/dovecot-lda-errors.log mail_plugins = acl virtual sieve postmaster_address = postmaster } protocol imap { mail_max_userip_connections = 10 mail_plugins = acl virtual imap_acl } protocol lmtp { info_log_path = /var/log/dovecot/dovecot-lmtp.log log_path = /var/log/dovecot/dovecot-lmtp-errors.log mail_plugins = acl virtual sieve postmaster_address = postmaster } -- Robert Soderlund ----- End forwarded message ----- -- Robert Soderlund

1 0

Sieve + Vacation
by Jerry 02 May '16

02 May '16

I am not sure if this is possible. When I use "vacation" in a sieve script, it always sends the response using "<>". I need it to send the response using a specific address. Is this possible? Thanks :) -- Jerry

4 4

%{domain} (or %d) is empty
by Robban 02 May '16

02 May '16

Hi all! I have two userdb's, for one of them it's ldap based and the 2nd one is static. I want mail to ldap-users to be saved in /home/vmail/<username>/Maildir So far so good. Now I want mail to non-existent users to be placed in /home/vmail/<domain.tld>/Maildir (notice the double-slashes that indicate that %d is empty): # doveadm user publicfolder(a)vendelso.se rs(a)netnerdz.se field value uid 500 gid 500 home /home/vmail// mail maildir:/home/vmail//Maildir/ uid vmail gid vmail home /home/vmail/rs mail maildir:/home/vmail/rs uidNumber 500 gidNumber 500 And here's my configuration files: # cat /etc/dovecot/dovecot-ldap.conf.ext hosts = 172.20.202.60 dn=uid=dovecot,cn=sysaccounts,cn=etc,dc=netnerdz,dc=se dnpass=<suppressed> auth_bind = yes auth_bind_userdn = uid=%u,cn=users,cn=accounts,dc=netnerdz,dc=se ldap_version = 3 base = cn=accounts,dc=netnerdz,dc=se deref = never scope = subtree user_filter = (&(objectClass=posixAccount)(mail=%u@*)) user_attrs = \ =user=%{ldap:uid}, \ =home=/home/vmail/%{ldap:uid}, \ =mail=maildir:/home/vmail/%{ldap:uid}, \ =uidNumber=500, \ =gidNumber=500 pass_filter = (&(objectClass=posixAccount)(mail=%u@*)) pass_attrs = uid=user,userPassword=password # dovecot -n # 2.2.10: /etc/dovecot/dovecot.conf # OS: Linux 3.10.0-327.10.1.el7.x86_64 x86_64 CentOS Linux release 7.2.1511 (Core) auth_mechanisms = login gssapi plain auth_socket_path = /var/run/dovecot/auth-userdb auth_username_format = %n auth_username_translation = -@.@/@_@ auth_verbose = yes base_dir = /var/run/dovecot/ imap_id_log = * imap_id_send = name imap_urlauth_host = * import_environment = TZ lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes lda_original_recipient_header = X-Original-To lmtp_save_to_detail_mailbox = yes login_greeting = IMAPd ready. login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c mail_access_groups = vmail mail_attachment_hash = %{sha256} mail_debug = yes mail_gid = vmail mail_location = maildir:~/Maildir mail_log_prefix = "%s(%u)::%n: " mail_plugins = acl virtual mail_privileged_group = vmail mail_shared_explicit_inbox = yes mail_uid = vmail mailbox_list_index = yes maildir_broken_filename_sizes = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mmap_disable = yes namespace NetnerdzSE { list = yes location = maildir:/home/vmail/netnerdz.se/:INDEX=/home/vmail/%u/public prefix = NetnerdzSE/ separator = / subscriptions = yes type = public } namespace Shared { list = children location = maildir:/home/vmail/%%n/Maildir/:INDEX=/home/vmail/%n/shared/%%u prefix = Shared/%%n/ separator = / subscriptions = yes type = shared } namespace VendelsöSE { list = yes location = maildir:/home/vmail/xn--vendels-g1a.se/:INDEX=/home/vmail/%u/public prefix = VendelsöSE/ separator = / subscriptions = yes type = public } namespace VendelsoSE { list = yes location = maildir:/home/vmail/vendelso.se/:INDEX=/home/vmail/%u/public prefix = VendelsoSE/ separator = / subscriptions = yes type = public } namespace inbox { hidden = no inbox = yes list = yes location = mailbox Archive { auto = subscribe special_use = \Archive } mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = / subscriptions = yes type = private } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile:/home/vmail/dovecot-acl acl_shared_dict = file:/home/vmail/shared-mailboxes.db mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size sieve = /home/vmail/%u/dovecot.sieve sieve_default = /etc/dovecot/default.sieve sieve_default_name = roundcube sieve_dir = /home/vmail/%u/sieve sieve_global_dir = /etc/dovecot/sieve/global.sieve sieve_global_path = /etc/dovecot/sieve/global.sieve sieve_max_actions = 0 sieve_max_redirects = 4 sieve_max_script_size = 0 } postmaster_address = postmaster@%d protocols = imap lmtp sieve service auth-worker { user = root } service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } unix_listener auth-client { group = postfix mode = 0660 user = postfix } unix_listener auth-master { group = vmail mode = 0660 user = vmail } unix_listener auth-userdb { group = mode = 0666 user = } user = $default_internal_user } service dict { unix_listener dict { group = mail mode = 0600 user = mail } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } process_min_avail = 0 service_count = 1 vsz_limit = 256 M } service imap { process_limit = 1024 vsz_limit = 256 M } service lmtp { inet_listener lmtp { address = 127.0.0.1 port = 24 } unix_listener lmtp { mode = 0666 } } service managesieve-login { inet_listener sieve { port = 4190 } } ssl = required ssl_ca = </etc/dovecot/dovecot-ca.crt ssl_cert = </etc/dovecot/imap.netnerdz.se.crt ssl_client_ca_file = /etc/pki/tls/cert.pem ssl_key = </etc/dovecot/imap.netnerdz.se.key ssl_prefer_server_ciphers = yes submission_host = 127.0.0.1:25 userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } userdb { args = uid=500 gid=500 home=/home/vmail/%{domain}/ allow_all_users=yes driver = static override_fields = mail=maildir:/home/vmail/%d/Maildir/ result_failure = return-ok skip = found } valid_chroot_dirs = /home/vmail verbose_proctitle = yes protocol sieve { disable_plaintext_auth = yes info_log_path = /var/log/dovecot/dovecot-sieve.log log_path = /var/log/dovecot/dovecot-sieve-errors.log managesieve_implementation_string = dovecot managesieve_max_line_length = 65536 } protocol lda { auth_socket_path = /var/run/dovecot/auth-master info_log_path = /var/log/dovecot/dovecot-lda.log log_path = /var/log/dovecot/dovecot-lda-errors.log mail_plugins = acl virtual sieve postmaster_address = postmaster } protocol imap { mail_max_userip_connections = 10 mail_plugins = acl virtual imap_acl } protocol lmtp { info_log_path = /var/log/dovecot/dovecot-lmtp.log log_path = /var/log/dovecot/dovecot-lmtp-errors.log mail_plugins = acl virtual sieve postmaster_address = postmaster } -- Robert Soderlund

1 0

autoexpunge wildcard mailbox from userdb
by Leon Kyneur 02 May '16

02 May '16

Was excited to see that wildcards are now possible on autoexpunge in the 2.2.24 release. However I'm trying to configure these from the userdb lookup and it doesn't appear to be working. if I set in 15-mailboxes.conf mailbox Trash/* { ... autoexpunge = 10m } everything works.. however if I return =namespace/inbox/mailbox/Trash/*/autoexpunge=10m via userdb - it does not. Logs say: Debug: Unknown userdb setting: plugin/namespace/inbox/mailbox/Trash/*/autoexpunge=10m Is what I am trying to do even possible? Thanks Leon

2 4

Re: Changing Password Schemes
by cajeptha 02 May '16

02 May '16

That one is there to close the left one after IF Sent from my Samsung device -------- Original message -------- From: Christian Kivalo <ml+dovecot(a)valo.at> Date: 2016-05-02 11:58 (GMT+02:00) To: dovecot(a)dovecot.org Subject: Re: Changing Password Schemes On 2016-05-02 11:32, Carl Jeptha wrote: > password_query = \ > SELECT username AS USER, \ > IF(cryptpwd IS NULL OR cryptpwd='', CONCAT('{PLAIN}',clearpwd), > cryptpwd) AS PASSWORD, \ > '/var/vmail/%d/%n' as userdb_home, \ > 'maildir:/var/vmail/%d/%n' as userdb_mail, 150 as userdb_uid, 8 > as > userdb_gid \ > FROM mailbox \ > WHERE username = '%u' AND active = '1' You have a right parenthesis after clearpwd in your sql statement CONCAT('{PLAIN}',clearpwd),cryptpwd) > user_query = \ > SELECT '/var/vmail/%d/%n' as home, 'maildir:/var/vmail/%d/%n' as > mail, \ > 150 AS uid, 8 AS gid, concat('dirsize:storage=', quota) AS quota \ > FROM mailbox WHERE username = '%u' AND active = '1' > > Above is what I have done, but still getting an error: > > May 2 05:26:03 |****** dovecot: auth-worker(3442): Error: > sql(user(a)domain.tld,xxx.xxx.xxx.xxx): Password query must return a > field named 'password' > > For testing purposes I put the query in PHPMyAdmin and it complains > this > (notice it drops "PASSWORD", but shows it in the query: > #1064 - You have an error in your SQL syntax; check the manual that > corresponds to your MySQL server version for the right syntax to use > near '\ > IF(cryptpwd IS NULL OR cryptpwd='', CONCAT('{PLAIN}',clearpwd), > cryptpwd) as ' at line 1 The PHPMyAdmin error message shows the relevant part to inspect. -- Christian Kivalo

1 0

deb repo with dovecot-antispam ?
by Håkon Alstadheim 02 May '16

02 May '16

There are .debs available for version 2.2 both from backports and ix.dovecot.fi, but neither seem to have the antispam plugin built for version 2.2. Anybody know why, and (if there is no particular reason) how to get dovecot-antispam in a proper .deb package for dovecot-2.2.* ?

2 2

Dovecot (LDAP) get the quota limitation from windows Active directory
by Dogz 02 May '16

02 May '16

Hi, I can't get the quota limitation from windows AD, I did read the dovecot wiki like http://wiki2.dovecot.org/Quota/Configuration and search from google, but failed. *doveadm -D quota get -u dogz:* ... doveadm(dogz): Debug: auth input: dogz(a)mail.com home=/vmail/dogz/ mail=maildir:/vmail/dogz/Maildir/ uid=500 gid=500 mobile=quota_rule=*:storage=M ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ doveadm(dogz): Debug: changed username to dogz(a)mail.com doveadm(dogz): Debug: Added userdb setting: mail=maildir:/vmail/dogz/Maildir/ doveadm(dogz): Debug: Added userdb setting: plugin/mobile=quota_rule=*:storage=M ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ doveadm(dogz): Debug: Effective uid=1000, gid=1000, home=/vmail/dogz/ ... Quota name Type Value Limit % User quota STORAGE 72 - 0 User quota MESSAGE 82 - 0 *ldapsearch -x -h 192.168.90.20 -b dc=mail,dc=com -D cn=ldapquery,cn=users,dc=mail,dc=com -W '(&(mail=*dogz(a)mail.com*))'* ... objectClass: top objectClass: person objectClass: organizationalPerson objectClass: user ... maxStorage: 500 ... sAMAccountName: dogz ... mail: dogz(a)mail.com mobile: 200 carLicense: 2 My configuration files are as follwing */etc/dovecot/dovecot-ldap.conf :* .... scope = subtree deref = never user_filter = (&(objectCategory=person)(|(mail=%Lu)(otherIpPhone=%Lu))(!(userAccountControl:1.2.840.113556.1.4.803:=2))) pass_filter = (&(objectCategory=person)(|(mail=%Lu)(otherIpPhone=%Lu))(!(userAccountControl:1.2.840.113556.1.4.803:=2))) #PS: I don't know why I can't use otherMailbox to be the alias, but I can use otherIpPhone field successfully. user_attrs = =home=/vmail/%Ln/, =mail=maildir:/vmail/%Ln/Maildir/, =uid=1000, =gid=1000, =mobile=quota_rule=*:storage=%$M ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ default_pass_scheme = CRYPT pass_attrs = userPassword=password */etc/dovecot/conf.d/auth-ldap.conf.ext* auth_username_format = %Lu passdb { driver = ldap args = /etc/dovecot/dovecot-ldap.conf } userdb { driver = ldap args = /etc/dovecot/dovecot-ldap.conf } */etc/dovecot/conf.d/90-quota.conf:* ... plugin { #quota = dict:user::proxy::quota #quota2 = dict:domain:%d:proxy::quota_domain #quota_rule = *:storage=102400 #quota2_rule = *:storage=1048576 #quota = dict:User quota::file:%h/Maildir/dovecot-quota quota = dict:User quota::file:~/Maildir/dovecot-quota } I also tried different form as following, but still can't work it out, please help me and thank you in advance. user_attrs = =home=/vmail/%Ln/, =mail=maildir:/vmail/%Ln/Maildir/, =quota_rule=*:storage=%{ldap:mobile}M or user_attrs = =home=/vmail/%Ln/, =mail=maildir:/vmail/%Ln/Maildir/, =mobile=quota_rule=*:storage=%{ldap:mobile}M Is there any information I should provide? Please advise me and thank you in advance. -- Best Regards, Dogz

1 1