- dovecot - dovecot.org

How to import an mbox to an existing user as a new mailbox
by Paul Hoffman 09 Aug '15

09 Aug '15

Greetings. I have a bunch of mbox files that I want to import to an existing user, each into a new mailbox. That is, I want to import the file project1.mbox to user Foo, into a newly-created mailbox called "Project 1". Is there a dovecot tool to do this on the server? --Paul Hoffman

4 10

Trying to back
by Kevin Laurie 09 Aug '15

09 Aug '15

Hi, I am trying to backup multiple mail accounts by using imapsync and Dovecot on my local machine. I am using maildir as a mail storage format and currently have the following setting on my local machine :- mail_location = maildir:~/Maildir I am afraid that if I imapsync multiple accounts they will all get stored in the same location. Is there a way to seperate the accounts based on the email address? Appreciate if someone could advise. Thanks! Kevin

3 3

2.2.18: Mailbox INBOX sync: mailbox_delete failed: INBOX can't be deleted.
by Dale Gallagher 08 Aug '15

08 Aug '15

Hello I have 2.2.18 built with: ./configure \ --prefix="$prefix" \ --bindir="$prefix/bin" \ --sbindir="$prefix/bin" \ --sysconfdir="/etc" \ --with-storages="maildir,imapc,pop3c" \ --without-vpopmail \ --without-ldap I'm attempting to sync (backup) from another Dovecot server running version 2.0.21: Both servers don't have no explicit namespaces configured and both are using the Maildir storage plugin. doveadm -Dv -o imapc_user=remote_user -o imapc_host=source.host -o imapc_port=993 -o imapc_ssl=imaps -o imapc_password=remote_pass -o imapc_features="rfc822.size fetch-headers" backup -R -u local_user imapc: All seems to go well, showing local and remote mailbox syncing without errors, then finally: dsync(mcg): Debug: brain M: Deleting mailbox 'INBOX' (GUID 59023c2a911dc255842b0000d09efc50): UIDVALIDITY changed (1355416734 -> 1438784913) dsync(mcg): Error: Mailbox INBOX sync: mailbox_delete failed: INBOX can't be deleted. No mail is synced to the local server (2.2.18) after this error halts execution. What should I be looking for, in terms of possible causes of this error? I've tried syncing on a completely fresh mailbox, which hasn't been accessed by a mail client and the same error occurs. I've seen similar reports of this error before, without clear solutions / suggestions. Help would be greatly appreciated. Thanks

1 2

opening a maildir ?
by Kevin Laurie 07 Aug '15

07 Aug '15

Hello, I have a maildir on my Ubuntu PC. I used imapsync + dovecot to copy all my emails on it. What would be a convenient way to access all the emails ( I want to go through and download all attachments). So a tool with some GUI will be nice. Appreciate if someone could help here. Thanks Kevin

2 1

Dovecot under Linux with mail-extension and case insesitiv
by Sascha 06 Aug '15

06 Aug '15

Hello, i use doevecot 2.2.18 current. My Problem is with email-extension and case sensitiv folders. Example: user+extenstion will be delivered to the user and subfolder extenstion so this is okay. but user+extenstion will not be delivert to the user and exiting subfolder Extenstion so that is not okay. The mail will be also delivered in the subfolder extension. The exiting Folder Extension will not used. Give's a way to tell dovecot, use the extension as a Folder, if a exiting folder with Upper/Lower Cases will be detect and use the right folder to delivery? -- Regards Sascha --- Diese E-Mail wurde von Avast Antivirus-Software auf Viren geprüft. https://www.avast.com/antivirus

6 7

Dovecot/Pigeonhole Issue (UTC modtime instead of localtime)
by Christoph Gröver 06 Aug '15

06 Aug '15

Hi List, We are using the following setup: Dovecot-2.2.18 Pigeonhole-0.4.8 (for Dovecot-2.2) After the mail is finally delivered via a fileinto by the Sieve filter it gets an updated timestamp (modification time). The server has localtime setup correctly IMO (UTC +0200), but still the delivered mail is setup as being two hours old. I think I found out that the function sieve_file_storage_update_mtime() is the cause of this problem. But perhaps there has to be some kind of setup, that tells pigeonhole to use the 2 hour offset of CEST. I think to reset the mtime by utime(s) is a bit strange. It already gets the correct modtime just by storing it in the filesystem. Last version we used (0.2.5) did not have this poblem. So it must be there for some reason? Perhaps you can enlighten me. Thanks for your time. Greetings -- Sitepark Gesellschaft für Informationsmanagement mbH Rothenburg 14-16, 48143 Münster Telefon: +49 251 482655-0, Telefax: +49 251 482655-55 http://www.sitepark.com http://www.facebook.com/sitepark Geschäftsführer: Thorsten Liebold Amtsgericht Münster, HRB 5017

2 5

Dovecot sieve pigeonhole permission
by Gerhard Wiesinger 05 Aug '15

05 Aug '15

Hello, I'm running dovecot in a classical vmail.vmail setup with pigeonhole and LMTP. Permission worked well in the initial setup but currently (maybe after Fedora 22 update) I'm having the following permission issue: lmtp(root): Error: 7fPZFOL9wFXePQAABcdabc: sieve: binary open: failed to open: open(/etc/dovecot/sieve_after.svbin) failed: Permission denied (euid=9999(vmail) egid=9999(vmail) missing +r perm: /etc/dovecot/sieve_after.svbin, we're not in group 0(root), dir owned by 0:0 mode=0755) lmtp(root): Error: 7fPZFOL9wFXePQAABcdabc: sieve: binary save: failed to create temporary file: open(/etc/dovecot/sieve_after.svbin.myserver.mydomain.15838.) failed: Permission denied (euid=9999(vmail) egid=9999(vmail) missing +w perm: /etc/dovecot, dir owned by 0:0 mode=0755) lmtp(root): Error: 7fPZFOL9wFXePQAABcdcbc: sieve: The LDA Sieve plugin does not have permission to save global Sieve script binaries; global Sieve scripts like `/etc/dovecot/sieve_after.sieve' need to be pre-compiled using the sievec tool rpm -V dovecot dovecot-pigeonhole doesn't report any permission issues Versions: dovecot-2.2.18-2.fc22.x86_64 dovecot-pigeonhole-2.2.18-2.fc22.x86_64 Relevant config parts: mail_gid = vmail mail_uid = vmail plugin { sieve = ~/.dovecot.sieve sieve_after = /etc/dovecot/sieve_after.sieve sieve_dir = ~/sieve } ls -lad /etc/dovecot/ drwxr-xr-x. 3 root root 4096 Jul 30 18:13 /etc/dovecot/ ls -la /etc/dovecot/*sieve* -rwxr-x--- 1 vmail vmail 288 Aug 8 2014 /etc/dovecot/sieve_after.sieve -rw-r----- 1 root root 355 Jul 30 18:13 /etc/dovecot/sieve_after.svbin What's are the recommended permissions for the files/directories (also for root service startup of dovecot)? Did something change in permissions management? Thanx. Ciao, Gerhard -- http://www.wiesinger.com/

2 3

451 4.3.0 Temporary internal failure
by Nutsch 04 Aug '15

04 Aug '15

Hi i can send mails without problems in any direction, except when the attachments are bigger than 1 MB. I alway get this message relay=mail.example.net[private/dovecot-lmtp], delay=35155, delays=35155/0.03/0.02/0.09, dsn=4.3.0, status=deferred (host mail.example.net[private/dovecot-lmtp] said: 451 4.3.0 Temporary internal failure (in reply to end of DATA command)) Aug 3 19:34:34 46185 dovecot: lmtp(6477): Disconnect from local: Temporary internal failure (in DATA) postconf message_size_limit message_size_limit = 0 postconf mail_size_limit mailbox_size_limit = 0 i can send big attachments to an extern address but not from intern to intern. Someone said that maybe the tmp directory is the problem so i checked the size. ls -ald /tmp/; df -h /tmp/ drwxrwxrwt 4 root root 80 Aug 3 19:44 /tmp/ Filesystem Size Used Avail Use% Mounted on - 1,0M 4,0K 1020K 1% /tmp root@example:/tmp# is there a connection between lmtp and the size of the tmp directory? And why is the size 1,0M, tmp is not an own partion. Should i increase the size? And if yes, how? df -h Filesystem Size Used Avail Use% Mounted on /dev/vzfs 80G 12G 69G 15% / ??? br. noctua

2 4

Renaming shared mailbox makes it disappear from sharee
by Andy Csillag 03 Aug '15

03 Aug '15

I've run into an interesting thing. If a mailbox has been shared to a second user (I'll call it the sharee), and there are subfolders on that mailbox, and the sharee renames one of those subfolders, it disappears from view to the sharee. The only way I've been able discover to fix it is to have the sharee create a new subfolder -- then the renamed folder shows up again; in addition to the newly created folder. For example, first(a)example.org shares it's INBOX to second(a)example.org. There's a folder INBOX/thing, which second@ renames to INBOX/renamed (ACLs permitting). second@ can no longer can see INBOX/renamed (or INBOX/thing for that matter), via IMAP's LIST command. But if second@ creates a new folder INBOX/other, INBOX/renamed is now visible. This is very reproducible for me. I also tried it without the imappostlogin bit (in the dovecot -n). Anyone else run into this? No NFS is involved, this is a single machine setup. Output of dovecot -n # 2.2.18: /dovecot/etc/dovecot/dovecot.conf # Pigeonhole version 0.4.8 # OS: Linux 2.6.32-504.el6.x86_64 x86_64 CentOS release 6.6 (Final) xfs auth_master_user_separator = * auth_mechanisms = plain login dict { acl = mysql:/dovecot/etc/dovecot/dovecot-dict-sql.conf.ext } disable_plaintext_auth = no lda_mailbox_autosubscribe = yes mail_home = mdbox:/dovecot/var/homedirs/%2Mu/%2.2Mu/%u mail_location = mdbox:/dovecot/var/mailboxes/%2Mu/%2.2Mu/%u mail_plugins = acl mail_shared_explicit_inbox = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate vnd.dovecot.pipe vnd.dovecot.filter vnd.dovecot.execute namespace { list = children location = mdbox:/dovecot/var/mailboxes/%%2Mu/%%2.2Mu/%%u prefix = shared/%%u/ separator = / subscriptions = no type = shared } namespace inbox { inbox = yes location = mailbox Drafts { special_use = Drafts } mailbox Junk { special_use = Junk } mailbox Sent { special_use = Sent } mailbox "Sent Messages" { special_use = Sent } mailbox Trash { special_use = Trash } prefix = } passdb { args = /dovecot/etc/dovecot/mastership-sql.conf driver = sql master = yes pass = yes } passdb { args = /dovecot/etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { acl = vfile acl_shared_dict = proxy::acl sieve_after = /dovecot/etc/dovecot/sieve/99-autofile.sieve sieve_after2 = /dovecot/etc/dovecot/sieve/98-notify-biz-address.sieve sieve_execute_bin_dir = /dovecot/etc/dovecot/sieve-execute sieve_execute_socket_dir = sieve-execute sieve_extensions = +vnd.dovecot.execute +vnd.dovecot.filter +vnd.dovecot.pipe sieve_filter_bin_dir = /dovecot/etc/dovecot/sieve-filter sieve_filter_socket_dir = sieve-filter sieve_pipe_bin_dir = /dovecot/etc/dovecot/sieve-pipe sieve_pipe_socket_dir = sieve-pipe sieve_plugins = sieve_extprograms } postmaster_address = postmaster(a)xxxxdomain.com sendmail_path = /dovecot/sbin/sendmail service dict { unix_listener dict { user = dovecot } } service imap-postlogin { executable = script-login /dovecot/etc/dovecot/imappostlogin user = $default_internal_user } service imap { executable = imap imap-postlogin } ssl = no userdb { args = uid=dovecot gid=dovecot home=/dovecot/var/mailboxes/%%2Mu/%%2.2Mu/%%u driver = static } protocol lmtp { mail_plugins = acl sieve } protocol lda { mail_plugins = acl sieve } protocol imap { mail_plugins = acl imap_acl }

1 0

Structure of dovecot.index.pvt.log
by Miloslav Hůla 03 Aug '15

03 Aug '15

Hi, we are migrating from Cyrus to Dovecot and I would like to migrate seen flags for shared folder too. We have Dovecot 2.2.13 prepared as: location = maildir:/vmail/user/%%n/Maildir:INDEXPVT=/vmail/user/%n/Maildir/Shared/%%n Now I'm looking for 'dovecot.index.pvt.log' syntax to be able migrate Seen flags. All I know is, that index contains messages UID and Seen flag. May I ask you for a link to doc (if it exists) or into a source code? Should I care about 'dovecot.index.pvt.log' timestamps? Thank you, Milo

1 0