- dovecot - dovecot.org

Re: [Dovecot] Dovecot LDA
by Steven F Siirila 09 Oct '06

09 Oct '06

On Sun, Oct 08, 2006 at 10:25:53PM +0300, Timo Sirainen wrote: > On Fri, 2006-10-06 at 21:00 -0500, Steven F Siirila wrote: > > I am running Dovecot 1.0-rc6 along with dovecot-sieve from 2006-10-05 CVS. > > I am calling dovecot deliver from Postfix (main.cf): > > > > mailbox_command = /opt/dovecot/libexec/dovecot/deliver > > > > Upon switching to dovecot deliver, I observed two problems: > > > > 1) An extraneous "From " header now appears at the top of each message > > delivered, e.g.: > > > > From dovecot.deliver Fri Oct 06 19:59:57 2006 > > From sfs(a)tc.umn.edu Fri Oct 6 19:59:57 2006 > > Return-Path: <sfs(a)tc.umn.edu> > > > > Using Postfix delivery the first of these lines does not appear. > > This, of course, confuses MUAs. > > Don't give F flag to Postfix's pipe command. The messages in question are accepted by the Postfix smtpd process and processed by Postfix, and handed off to dovecot deliver. I am not specifying an F flag anywhere. If I remove the "mailbox_command" I specified above, Postfix delivers the mail with only the one "From " header -- with the mailbox_command above (no options specified), I get two "From " headers. > Although this reminds me that the "dovecot.deliver" is wrong in there.. > Hmm. I think I'll add a maildrop-compatible -f <envelope> parameter > here. How will this help me? I don't even want the added "From " header. If Postfix is not supposed to be writing one, then how do I tell it not to and how does Postfix tell dovecot deliver what to put in the "From " header it writes? (It must be the proper return address seen in the original SMTP transaction as the MAIL FROM value) > There, done in CVS. I'll also make 1.0rc8 release today. > > > 2) The "Content-Length:" header appears after a blank line, essentially > > putting it into the RFC822 body, e.g.: > > > > User-Agent: Mutt/1.4.2.1i > > X-UID: 11510 > > Status: > > X-Keywords: > > > > Content-Length: 200 > > > > test > > Are you sure it's a blank line? Dovecot adds lots of spaces after > X-Keywords which could just make it look like that. You're correct; the line prior to the "Content-Length:" header was indeed an "X-Keywords:" header padded out to exactly 80 characters, making it appear that there was an extra blank line after it (my xterm window is set to 80 columns). -- Steven F. Siirila Office: Lind Hall, Room 130B Internet Services E-mail: sfs(a)umn.edu Office of Information Technology Voice: (612) 626-0244 University of Minnesota Fax: (612) 626-7593

1 0

[Dovecot] which e-mail client can work with recent dovecot?
by Sergey Ivanov 09 Oct '06

09 Oct '06

Hi, I'm trying to use dovecot-1.0.rc7. Before I've used dovecot-1.0 from nightly cvs build of August 08, 2006. It worked perfectly, on Linux 64-bit, you can see spec and patches at http://www.sisyphus.ru/srpm/dovecot/ When I tried to upgrade to rc7 and to recent nightly cvs builds with the same configuration and patches (provided necessary adaptations), it builds O.K, but can not move messages from folder to folder. I've tried the following mail clients: thunderbird-1.5.0.7, evolution-2.0.2, sylpheed-claws-2.0 and KMail-1.7.1 (all from Centos-4.4). KMail refuses to copy (or to move) multiple selected messages, saying:" Error while copying messages.Connection to Server Closed Unexpectedly ...". Evolution is not able to open folders at 3-rd level (like dovecot/2006/09), or it is so slow that I was not able to test moving/copying messages in it. Sylpheed-claws died whan I tried this message copying. Thunderbird tries to move infinetly in a loop, filling the dovecot's log with lines: --- Sep 28 12:56:25 alt64 dovecot: imap-login: Login: user=<seriv>, method=plain, rip=66.80.117.2, lip=192.168.10.8, TLS Sep 28 12:56:25 alt64 dovecot: IMAP(seriv): file mail-cache-transaction.c: line 709 (mail_cache_add): assertion failed: (fixed_size == (unsigned int)-1 || fixed_size == data_size) Sep 28 12:56:25 alt64 dovecot: child 25177 (imap) killed with signal 6 Sep 28 12:56:25 alt64 dovecot: imap-login: Login: user=<seriv>, method=plain, rip=66.80.117.2, lip=192.168.10.8, TLS Sep 28 12:56:25 alt64 dovecot: IMAP(seriv): file mail-cache-transaction.c: line 709 (mail_cache_add): assertion failed: (fixed_size == (unsigned int)-1 || fixed_size == data_size) Sep 28 12:56:25 alt64 dovecot: child 25183 (imap) killed with signal 6 --- (approximitely 2 cicles per second). And when I reinstalled back the previously worked version of dovecot, the problem remains. -- With best regards, Sergey Ivanov.

3 3

[Dovecot] 1.0rc8 - not quite yet
by Timo Sirainen 09 Oct '06

09 Oct '06

OK, I know I promised rc8 today in my recent mails, but it's way too late and writing changes to NEWS file takes time. :) So I guess it'll happen tomorrow then. In the mean time it would be nice if you'd test that I didn't break anything badly with my recent changes. Especially when I changed the password verifications to detect if the password is in hex or base64 encoding based on the string length. This also allowed me to make LDAP-MD5 and PLAIN-MD5 use the same password verification function. I like this change. :) So, the almost-rc8 snapshot is in: http://dovecot.org/nightly/dovecot-latest.tar.gz I also started building dovecot-sieve snapshots: http://dovecot.org/nightly/sieve/

1 0

[Dovecot] Maildir++ quota inconsistency
by Anand Buddhdev 09 Oct '06

09 Oct '06

I've found what I think is an inconsistency in the Maildir quota implementation. According to the Maildir++ quota specification at: http://www.inter7.com/courierimap/README.maildirquota.html Maildir++ quota can be specified as maximum size, or maximum number of messages, or even both. The size specification is supposed to be in bytes. So I could use '10000000S' to set a quota of around 10MB. Now, the Exim MTA has an independent Maildir++ quota implementation, and it follows the specification, so if I set the quota in Exim to 10000000, it will work perfectly with sqwebmail and courier-imap. However, it doesn't play well with Dovecot, because Dovecot chooses to interpret the quota as kilobytes, rather than bytes. An example: If I set the quota to 10240 in Dovecot, it creates a maildirsize file with the value 10240000 in it. If I then set the quota to 10M in Exim, Exim calculates that as 10485760. It detects that the value in the maildirsize file is wrong, and recreates the file with a quota of 10485760 bytes. Exim's behaviour is consistent with the courier family of packages, as well as the specification, so I'm venturing to say that Dovecot's implementation is slightly non-standard, and should be fixed so that the quota setting is interpreted as bytes, and not as kilobytes, to avoid a situation like the above. -- Anand

4 4

[Dovecot] Password mismatch - SHA1 authentication problem.
by guard 09 Oct '06

09 Oct '06

Hello, I have problem with authentication. I'm using SHA1 passwords stored in MySQL. >From debug: Info: auth-worker(default): sql(test@mail, IP): query: SELECT password FROM vmail WHERE mail = 'test@mail' Info: auth-worker(default): sql(test@mail ,IP): Password mismatch Info: auth-worker(default): sql(test@mail ,IP): SHA1(dupadupa) != '2bca9dbe8a14811c687bb8c51c0e1cd14db8a018' I tried convert password to upper case, but it didn't help. Then I tried authentication in plain text and everything works fine... So, does dovecot crypt SHA1 using other method? I also use same SHA1 passwords to authenticate users in exim and it doesn't have any problem with that. I'm using mysql 5.0.24 and dovecot 1.0 rc7. Best regards, Tomasz Krynicki

2 1

[Dovecot] Dovecot behaviour when the server's file system fails (possible feature request)
by Timo Neuvonen 09 Oct '06

09 Oct '06

I've met a couple of times a situation, that there is something wrong with the mail server's operating system / file system, but Dovecot is still working, although it cannot any more access the mailbox files. The result is, that the imap mail client in the workstation automatically synchronises with the improperly empty-looking mailbox, effectively deleting everything previously loaded into the workstation's mail client (eg. Outlook Express) when using imap protocol. This is very annoying, especially when the workstation isn't connected with a high-speed-enough connection, since after the server is properly brought up again, reloading all the contents of the improperly emptied mail client may take considerable amount of time. This is especially the case, if the workstation has kind of mobile connection (eg. gprs) with very limited bandwith -in that case the sychronizing of eg. 20MB account may take at least from half an hour to more than one hour, and in some cases (eg. gprs roaming) also cost considerable amount of money (gprs data transfer may cost from eg. 5 to over 10 euros or dollars per megabyte, when roaming outside the phone operator's own network). So, is there currently a way to configure Dovecot in a way it would recognize that the mailbox actually is not accessible, and in that case it would return an error message to the mail client instead of returning "empty mailbox"? Of course, a smart enough mail client might also ask something from the user, but that seems not be the case either... If this behavious cannot be changed with the current configuration options, then a kind feature request to the developer: Would it be possible to change the behaviour of Dovecot when it actually can not access the mailbox files? Although the actual problem in this case is outside Dovecot, this kind of improvement would greatly improve the error tolerance of the whole system. -- TiN

2 1

[Dovecot] fd leak in 1.0rc7?
by Quentin Garnier 09 Oct '06

09 Oct '06

Hi, I just upgraded a 0.99 installation to 1.0rc7 (going from mbox to maildir along the way, but that's another story), and I'm seeing a rather fast fd quick; I already had to restart dovecot once, after a few hours. What is leaked are pipes, left open on the master dovecot process while the other end is long gone. I can't tell right now if it happens for every single login process spawned (either pop3 or imap), but at least a lot of them. FWIW, I'm running dovecot 1.0rc7 on NetBSD 2.0.3_STABLE. I'll try debugging tomorrow, but if anyone has an idea what happens in the meantime, I'm all hears. -- Quentin Garnier - cube(a)cubidou.net - cube(a)NetBSD.org "When I find the controls, I'll go where I like, I'll know where I want to be, but maybe for now I'll stay right here on a silent sea." KT Tunstall, Silent Sea, Eye to the Telescope, 2004.

2 3

[Dovecot] Pop3s duplicates
by Mark Adams 09 Oct '06

09 Oct '06

Hi, dovecot 1.0 rc6 Can someone please advise on my interpretation of the following logs, Users are reporting duplicate email coming through to their inbox. (user@domain replaced actual username and domain) There are also reports of the connection seemingly freezing whilst the emails are being downloaded (pausing at a certain amount of kB then continuing after a minute or 2). info: pop3-login: Login: user=<user@domain>, method=PLAIN, rip=89.192.*.**, lip=172.16.22.10, TLS info: POP3(user@domain): Disconnected top=0/0, retr=4/183443, del=0/313, size=83779942 info: pop3-login: Login: user=<user@domain>, method=PLAIN, rip=89.192.*.**, lip=172.16.22.10, TLS info: POP3(user@domain): Disconnected top=0/0, retr=3/183443, del=0/322, size=84201570 In the first instance the user downloaded 4 emails totalling 183443 bytes leaving 313 messages on the server. (outlook 2003 set to leave a copy of messages on the server) second instance user downloaded 3 emails, exactly the same amount of bytes and left 322 messages on the server. Does this mean the users connection was interrupted when downloading the original emails and they attempted to be sent again a second time? how could it be that there are 9 emails left on the server if only 3 extra were downloaded? Any help on this would be much appreciated. Thanks, Mark

3 5

[Dovecot] coding techniques
by David Lee 09 Oct '06

09 Oct '06

Whilst debugging a problem in dovecot LDA over the last few days, I came across two different issues in coding techniques. (Note: Please don't take this negatively; my intent is both positive and constructive!) The front page of the website www.dovecot.org says: "it uses several coding techniques to avoid most of the common pitfalls" So I hope it is OK to follow the spirit of that with some suggestions. The two issues I encountered both seem to be fairly easy holes to fall into, and yet equally easy to avoid in the first place by using established C practices. Firstly, many 'if' statements having a single statement (whether in then or else part) are currently written in a short-cut fashion: if (condition) statement 1; else statement 2; This, though technically legal, is potentially lethal when inserting (say) debugging statements. Without diligence it is all to easy to produce: if (condition) debug 1a; statement 1; debug 1b; else debug 2a; statement 2; debug 2b; A simple edit that looks, layout-wise, as if it would do the right thing (and do in Python!); but actually radically changes the execution flow. (This is left as an exercise to the reader... to demonstrate the point.) Could I suggest that the relevant brackets be always used as a matter of course? Something like: if (condition) { statement 1; } else { statement 2; } Then the insertion of debug statements doesn't inflict surprise. (No, I didn't fall into this hole. But it is a trap waiting to happen.) Secondly, code duplication. To give one example: 'get_var_expand_table()' appears in both 'deliver/deliver.c' and 'master/mail-process.c'. (There is also a similar looking function in 'auth/auth-request.c'.) Perhaps consideration should be given to merging such instances. For instance, my woes with "%i"-expansion being treated differently in mail-reading and mail-delivery would likely never have arisen if common code had been used. I hope that helps (constructively!). Best wishes. -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : Durham University : : http://www.dur.ac.uk/t.d.lee/ South Road : : Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. :

2 1

[Dovecot] rc7 crashing under heavy load
by Jeff A. Earickson 09 Oct '06

09 Oct '06

Help! Our students are back and they are pounding my dovecot server to death (ie "Login process died too early - shutting down" or "too many open files" type crash). I've had my third crash today. My setup: Solaris 10, imap and imaps, 3K users coming in via horde webmail. My current connection settings are: login_max_processes_count = 2048 login_max_connections = 4096 Q: Does raising these limits actually make my problem worse or better? Are there any other variables that I should change to prevent the "too many open files"? Suggestions? Jeff Earickson Colby College

6 9

[Dovecot] sent message not always saved in imap sent folder
by Ian Mortimer 09 Oct '06

09 Oct '06

Users who have their sent folder on the imap server report that sometimes a sent message is saved locally instead of on the server. This is the error from evolution: Error while performing operation. Failed to append to whoever@imap.server:Sent: Server unexpectedly disconnected: Unknown error Appending to local `Sent' folder instead.. We're seeing this with more than one client: evolution (linux) and thunderbird (OS X). It only happens occasionally but often enough to be annoying. It could be because the user's Sent folders are in their home directories which are NFS mounted. Are there any dovecot settings which might help? Thanks -- Ian

2 3

[Dovecot] Lost email (inbox) TWICE
by Sezer Yalcin 09 Oct '06

09 Oct '06

I have been losing my inbox. It happened twice. (2 days ago and just half an hour ago) I am using RHEL 4.0 with dovecot-0.99.11-4.EL4 System uses sendmail + procmail, dovecot is up and running. Here is how it happened: I was using Mozilla Firefox with IMAP. At the same time, I logged in from Squirrel Webmail in IMAP to the same account. Squirrel mail did not show my inbox contents. And I turned back to Thunderbird and it said, ' an error has occurred and logged to system log' and INBOX WAS LOST! squirrelmail 1.4.6 and mozilla thunderbird version 1.5.0.7 I checked server log, I see I log in but there are no further logs. This happened 2 days ago, I was wondering what the hell happened. I did not have any issues before. However recently we had a hard drive crash and all home folders are restored from backups. I assume it can be related to this. My inbox and imap folders are all in mbox format. I believe dovecot could not write to log or had something unexpected which lead to loss of inbox. There were no configuration issues and all mail system including dovecot were working fine. Now it works fine as well, but I believe it will lose inbox folder again. Has anybody experienced this? Any suggestions to recover inbox? File was reset to 0 bytes (could be deleted as well), when i did 'stat' on file, there was a file with 1 new message, all were lost. Thank you. Sezer

2 1

[Dovecot] Dovecot hang
by Catalin Constantin 09 Oct '06

09 Oct '06

Hello, We run dovecot 1.0.rc6-1 on a debian system. The user auth db is postgresql and the storage folders are on a NFS partition. Latelly every 2 days the authentification hangs and i see in the logs: Sep 21 10:04:22 c005 dovecot: login: tried to change state 0 -> 17808 (if you can't login at all, see src/lib/fdpass.c) What is the problem ? What can i do ? Thank you ! -- Catalin Constantin Bounce Software http://www.bounce-software.com http://www.cabanova.ro

2 1

Re: [Dovecot] LIST command ignores "hidden=yes" for default namespace
by Bill Boebel 09 Oct '06

09 Oct '06

On Sun, August 6, 2006 7:57 pm, Timo Sirainen <tss(a)iki.fi> said: > On Wed, 2006-07-05 at 12:04 -0400, Bill Boebel wrote: >> On Sun, June 11, 2006 1:51 pm, Timo Sirainen <tss(a)iki.fi> said: >> > On Mon, 2006-05-08 at 22:03 -0400, Bill Boebel wrote: >> >I'm not sure if this is a bug or just an undesirable feature, but when I >> >have our namespace configured to match Courier's "INBOX." functionality, >> >Dovecot forces me to also define a default namespace (with no prefix). >> >Without the default namespace defined I get "NO Unknown namespace." errors >> >when trying to subscribe or unsubscribe folders. >> > >> > It was a bug when tb-extra-mailbox-sep workaround was enabled. Fixed: >> > http://dovecot.org/list/dovecot-cvs/2006-June/005709.html >> > >> >> The second part of this still seems to be the case with RC2... the LIST command >> ignores "hidden=yes". > > hidden=yes only means it's not listed in NAMESPACE command's reply and > that the namespace prefix isn't shown as a mailbox in LIST replies. > Since the prefix is empty and you're listing the mailboxes from root, it > shows the mailboxes as it should.. > > Correct way would be to just use one namespace and fix the problems > related to it. Could you test with RC6 and show me what commands give > the unknown namespace errors? Subscribing and unsubscribing worked fine > with me. Although INBOX subscription causes some problems with LSUB. > I finally got around to testing this. I tested with RC7 CSV 20060924. And I am testing with just one namespace: namespace private { separator = . prefix = INBOX. inbox = yes } I no longer get the unknown namespace errors. However, INBOX is listed twice in the LIST command: 2 list "" "*" * LIST (\HasChildren) "." "INBOX" * LIST (\HasChildren) "." "INBOX.RSS" * LIST (\HasNoChildren) "." "INBOX.Sent" * LIST (\HasNoChildren) "." "INBOX.Test" * LIST (\HasNoChildren) "." "INBOX.spam" * LIST (\HasNoChildren) "." "INBOX.Trash" * LIST (\HasNoChildren) "." "INBOX.Drafts" * LIST (\HasNoChildren) "." "INBOX" * LIST (\HasNoChildren) "." "INBOX.RSS.Kevin Minnick" If I change the namespace's inbox setting to "inbox = no" it only lists the INBOX once, however subscribing to the INBOX gives the "Unknown namespace." error. 2 list "" "*" * LIST (\HasChildren) "." "INBOX" * LIST (\HasChildren) "." "INBOX.RSS" * LIST (\HasNoChildren) "." "INBOX.Sent" * LIST (\HasNoChildren) "." "INBOX.Test" * LIST (\HasNoChildren) "." "INBOX.spam" * LIST (\HasNoChildren) "." "INBOX.Trash" * LIST (\HasNoChildren) "." "INBOX.Drafts" * LIST (\HasNoChildren) "." "INBOX.RSS.Kevin Minnick" 2 OK List completed. 4 subscribe INBOX 4 NO Unknown namespace.

2 1

[Dovecot] Using NFS - which OS would you chose
by Jonathan 09 Oct '06

09 Oct '06

Hi, I'm still looking at a large (under 100,000) user deployment of Dovecot, with a NetApp NFS server as the back-end storage. I've read a few remarks about needing the latest NFS patches from Trond Myklebust to prevent lock-ups. My management would be happiest with a vendor-supported distribution (and especially Suse Linux Enterprise Server 9 or 10). We will be running on an x86 platform. Under these circumstances, which operating system/distribution would you choose? And why? Suse SLES9 OpenSuse Debian RedHat FreeBSD Solaris_x86 Nexenta (www.nexenta.org) Many thanks for your thoughts/war stories. Jonathan.

6 9

[Dovecot] Cache fields
by Tony Kay 09 Oct '06

09 Oct '06

Hi, We are using Dovecot with maildir, and the mail client requests flags, internaldate, and uid for all messages on folder open, which on average takes 3 seconds, but for large folders is much longer. It seems like I want mail_cache_fields to include "flags", but which date corresponds to internaldate? date.received? Is UID always cached for messages, or does it have to read through the directory to get them? Are there other optimizations I can do that will improve the speed of folder opens? -- Anthony Kay University Computing Center (541) 346-1719 GPG Fingerprint: B0DB D46A 60AF FAE7 A94A 5075 0CB4 4D88 9F4F 7F09 This isn't right. This isn't even wrong. Wolfgang Pauli

2 1

[Dovecot] Date Received question
by Timothy Martin 09 Oct '06

09 Oct '06

I migrated from Courier to Dovecot, and today I notice that all my "date received" fields in my client (apple mail) show as the approx date/time of the migration rather than when the emails were received from the smtp server. Is this expected behavior? I normally sort by received date rather than sent -- since I don't care when someone sends something as much as when i get it. But those fields are totally bogus now. .tim

2 1

[Dovecot] Tru64 Unix and SIA
by Simon L Jackson 09 Oct '06

09 Oct '06

I have recently written a (minimal) Tru64 Unix SIA password module for Dovecot as part of testing a Dovecot installation. Has anyone else written a Tru64 Unix SIA module? Is anyone else interested in such a module? If so, how might I/we go about getting this/such a module into the main Dovecot source? Thanks -- Simon L Jackson Carringbush.Net +- Carringbush.Net Hosting * Development * Advice Web: www.carringbush.net <http://www.carringbush.net/> Email: simon.jackson(a)carringbush.net <mailto:simon.jackson@carringbush.net> Office: +61 3 9411 4400 Support: +61 3 9411 4444 Fax: +61 3 9411 4499 Level 1 15 Bedford Street Collingwood VIC 3066 Australia P.O. Box 1464 Collingwood VIC 3066 Australia +-

3 5

[Dovecot] dovecot starts and then exit
by Ed Lucero 08 Oct '06

08 Oct '06

I've just installed dovecot on FreeBSD 6.1. Running MySQL 5.0 on another server. Postfix version 2.3.3 Dovecot starts then exits with no error messages. I've run it as a daemon and on the command line with -F option How do I run it in debug mode so I can figure out why it does not stay running. The maillog has a startup message dovecot: Dovecot v1.0.rc7 starting up Ed Dovecot.conf ## Dovecot configuration file # IC - EL 2006.09.29 protocols = imap imaps pop3 pop3s # IC - EL 2006.09.29 disable_plaintext_auth = no # IC - EL 2006.09.29 ssl_disable = no # IC - EL 2006.09.29 ssl_cert_file = /usr/share/ssl/s/Cert.pem ssl_key_file = /usr/share/ssl/s/PrivateKey.pem login_process_size = 64 # IC - EL 2006.09.29 login_processes_count = 6 # IC - EL 2006.09.29 login_greeting = InternetCrusade ready. # IC - EL 2006.09.29 #default_mail_env = maildir:/var/mail/%Ld/%Ln/%2.256Hp default_mail_env = maildir:/var/mail/%Ld/%Ln/ mail_extra_groups = mail verbose_proctitle = yes first_valid_gid = 0 protocol imap { imap_client_workarounds = delay-newmail outlook-idle netscape-eoh tb-extra-mailbox-sep } protocol pop3 { # IC - EL 2006.09.29 pop3_uidl_format = %v.%u pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { sendmail_path = /usr/sbin/sendmail } auth default { # IC - EL 2006.09.29 mechanisms = plain login cram-md5 digest-md5 ntlm # IC - EL 2006.09.29 passdb sql { args = usr/local/etc/dovecot-sql.conf } # IC - EL 2006.09.29 userdb static { args = uid=5000 gid=5000 home=/var/mail/%Ld/%Ln } # IC - EL 2006.09.29 socket listen { client { user = postfix group = postfix path = /var/spool/postfix/private/auth mode = 0660 } } } #dict { #quota = mysql:/etc/dovecot-dict-quota.conf #} dovecot-sql.conf driver = mysql connect = host=db1.sandiegort.com user=dovecot password=BuatSmiT dbname=icmail default_pass_scheme = PLAIN password_query = SELECT password FROM emails WHERE account = '%n' AND domain = '%d' AND alias = 0

2 1

Re: [Dovecot] SSL errors
by Bill Boebel 08 Oct '06

08 Oct '06

On Fri, September 29, 2006 11:46 am, Dominic Marks <dom(a)helenmarks.co.uk> said: >> Actually, I found in the archives that I should increase login_process_size if >> I'm not running with login_process_per_connection. I have done this and that >> seems to have taken care of the malloc failure. However I am still getting a ton >> of these every few seconds: >> >> Sep 29 11:30:06 director4 dovecot: imap-login: SSL_read() syscall failed: EOF >> [70.171.61.190] >> Sep 29 11:30:06 director4 dovecot: imap-login: SSL_read() syscall failed: EOF >> [24.236.204.154] >> Sep 29 11:30:06 director4 dovecot: imap-login: SSL_read() syscall failed: EOF >> [70.171.61.190] >> Sep 29 11:30:08 director4 dovecot: imap-login: SSL_read() syscall failed: EOF >> [65.242.19.3] >> > > These are client disconnects, I believe. > Yep, all of my customers who had IMAP SSL problems are reporting that the problem is fixed now that I have increased login_process_size to 64 MB. In just two hours though the imap-login process is up to 33 MB, and continuing to grow. Is that normal? This particular server handles 1200 IMAP connections and 800 IMAPS connections concurrently on average. Bill

2 1

[Dovecot] Outlook "IMAP server closed connection"
by Mark Adams 08 Oct '06

08 Oct '06

Hi All, Dovecot 1.0rc2. Currently having a problem with Outlook clients popping up with the error; "Your IMAP server has closed the connection. This may occur if you have left the connection idle for to long" I initially though this would be the imap_client_workarounds = outlook-idle option, but this is currently set and always has been. I dont think this is a known issue that has been fixed with newer releases, as we have rc2 on another server that does not have this problem. Any help thankfully recieved. Regards, Mark

2 1

Re: [Dovecot] dovecot-1.0.rc7 install probs
by Timo Sirainen 08 Oct '06

08 Oct '06

On Fri, 2006-10-06 at 19:55 -0400, Steve Maring wrote: > and the make and make install appear to go smoothly. However I am > struck by the lack on an include directory in the install location. > I'm not sure if that means anything. Doesn't mean anything. No header files are installed. > AUXLIBS=" \ > -L/usr/local/dovecot-1.0.rc7/lib/dovecot \ Postfix doesn't need any Dovecot libraries or anything to build Dovecot SASL support. > but the postfix make always dies with: > > smtpd.c:4534: error: âdovecotâ undeclared (first use in this function) Well, don't know about that. I'd ask from Postfix list.

1 0

[Dovecot] Add virtual users to the Dovecot configuration
by Jens E. Madsen Jr. 08 Oct '06

08 Oct '06

Dear Dovecot Mail List, I have used Dovecot for quite a while to service remote users on my SOHO network. A local not-for-profit asked about getting their own dedicated domain name for mail. I followed: http://www.howtoforge.com/linux_postfix_virtual_hosting to set up a virtual, but the article leaves out system accounts and I have not been able to access both system and virtual users at the same time. I have the following lines: default_mail_env = maildir:/var/spool/vmail/%d/%n/ which, when commented out, works for system users default_mail_env = mbox:~/mail/:INBOX=/var/spool/mail/%u which, when commented out, which works for virtual users If both are uncommented, only system users work. Wiki-ing and Googling, I learned that namespace could be applied to the problem. Here is the namespace from the configuration file. #namespace private { # Hierarchy separator to use. You should use the same separator for all # namespaces or some clients get confused. '/' is usually a good one. # The default however depends on the underlying mail storage format. #separator = # Prefix required to access this namespace. This needs to be different for # all namespaces. For example "Public/". #prefix = # Physical location of the mailbox. This is in same format as # default_mail_env, which is also the default for it. #location = # There can be only one INBOX, and this setting defines which namespace # has it. #inbox = yes # If namespace is hidden, it's not advertised to clients via NAMESPACE # extension or shown in LIST replies. This is mostly useful when converting # from another server with different namespaces which you want to deprecate # but still keep working. For example you can create hidden namespaces with # prefixes "~/mail/", "~%u/mail/" and "mail/". #hidden = yes #} How do I specify which users use which namespace. Is there a good description of namespaces and how to use them? Thanks Jens

2 2

Re: [Dovecot] Automatically deleting Trash a la Courier
by Jeff Kowalczyk 08 Oct '06

08 Oct '06

Timo Sirainen wrote: > # Expire plugin. Mails are expunged from mailboxes after being there the > # configurable time. The first expiration date for each mailbox is stored in > # a dictionary so it can be quickly determined which mailboxes contain > # expired mails. The actual expunging is done in a nightly cronjob, which > # you must set up: > # dovecot --exec-mail ext /usr/libexec/dovecot/expire-tool > #expire = Trash 7 Spam 30 > #expire_dict = db:/var/lib/dovecot/expire.db For users implementing the expire-tool as an email retention policy, it may be helpful to add path wildcarding and exclusion to handle users with folder heirarchies. e.g., To implement a 1-year retention policy on messages in all folders, excluding all messages in and in subfolders of 'Archived Email': expire = Trash 7 Spam 30 * 365 expire_exclude = Archived\ Email\\*

2 1

Re: [Dovecot] Dovecot vs Ports
by Jos Chrispijn 08 Oct '06

08 Oct '06

Odhiambo WASHINGTON schreef (08-10-06 9:16): > You could have as well explained the problem, if it was that serious. > After the latest portupgrade I rebooted my system and for some reason it stopped booting after loadin acpi.ko Investigated the OS with Fixit (from the first install disc booting and choosing this option from the sysinstall menu). After fsck we could mount the HD and investigate the problem. Main problem was an error in the /etc/rc.conf.. The dovecot_enable was missing the quotes... I think this is due to the portmanager (the person that has made the port for BSD) instead of Dovecot itself... > I am running this version on 30+ FreeBSD 5.5-STABLE boxes and they all > seem fine though. Perhaps I should thank God I still don't run 6.2-PRE? > I think it is a combination of OS version and the person that makes the (accurate) port for that version. Anyway we're all humans after all, so this is allways possible. Just a little bit stressing on a normal Saturdaynight :-) regards, Jos Chrispijn

4 4

[Dovecot] Searchable archives?
by Francisco Reyes 08 Oct '06

08 Oct '06

Is there a searchable archive of the lists somewhere?

3 2

[Dovecot] bug: ssl fails when using certificates with "trust" setting
by Freddy Knolderpoort 08 Oct '06

08 Oct '06

Hi, just a minor bug... I filled in the fedora tracker: **https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=208746 It concerns (fedora-)version "1.0-0.beta2.7". Regards,

3 2

[Dovecot] Dovecot vs Ports
by Jos Chrispijn 08 Oct '06

08 Oct '06

Just discovered that there might be a problem with the latest Dovecot update thru portupgrade. If I reboot my BSD (6.2-PRERELEASE), it stopped/hanged during boot-sequence. Thanks to Jack Raats problem is solved now; he will explain _exactly_ what went wrong... regards, Jos

1 0

[Dovecot] test
by Timo Sirainen 08 Oct '06

08 Oct '06

?

3 2

[Dovecot] test mail
by Timo Sirainen 07 Oct '06

07 Oct '06

Lets see if the server move actually worked..

2 1

[Dovecot] Customizing Sign-Off Message
by Gerard Seibert 07 Oct '06

07 Oct '06

This is probably a dumb question; however, I have never let a thing like that stop me before. A user can configure Dovecot to give a customized greeting when it is accessed. Is there anyway to customize the message it displays when it terminates the session? -- Gerard Seibert gerard(a)seibercom.net "Losing my virginity was a career move." Madonna

2 2

[Dovecot] Server move complete
by Timo Sirainen 07 Oct '06

07 Oct '06

Looks like everything is working. Please mail me if you find something broken.

1 0

[Dovecot] imap-login problem
by "M. Tolga Özses" 06 Oct '06

06 Oct '06

dovecot: Oct 05 16:03:07 Info: imap-login: Login: user=<kartagis>, method=plain, rip=212.98.201.1, lip=192.168.1.2 dovecot: Oct 05 16:03:07 Error: IMAP(kartagis): open(/var/mail/.temp.kunduz.org.14095.855b9feb950c2c78) failed: Permission denied dovecot: Oct 05 16:03:07 Error: IMAP(kartagis): file_lock_dotlock() failed with mbox file /var/mail/kartagis: Permission denied Hi, I get these when I attempt to check my mail. Any ideas? Regards and thanks, -- M. Tolga Özses Bilgi Teknolojisi Sabanci Üniversitesi Orhanli 34956 Tuzla Istanbul Tel: (216) 483 91 98 Web: http://people.sabanciuniv.edu/mtozses

3 2

[Dovecot] re-installation
by "M. Tolga Özses" 06 Oct '06

06 Oct '06

Hi, I reinstalled my system, therefore lost dovecot. I get this message after reinstalling imap-login: Authenticate plain failed: Plaintext authentication disabled.: method=plain, rip=192.168.1.2, lip=192.168.1.2. Can you help me? Thanks :) Regards, -- M. Tolga Özses Bilgi Teknolojisi Sabanci Üniversitesi Orhanli 34956 Tuzla Istanbul Tel: (216) 483 91 98 Web: http://people.sabanciuniv.edu/mtozses

2 1

[Dovecot] dovecot mailbox to csv
by John Heim 05 Oct '06

05 Oct '06

We (the Math department at the U of Wisconsin) recently switched over from another server to dovecot One thing that a lot of people here do is set up an on-line form that sends them email. They use formmail for this. I have them edit their procmail config so that all the messages go into a particular mail folder.... So far so good. With our old system, all messages in a folder were kept in a single file. With dovecot, they go into a couple of different directories. This is problematic because we often need to convert the form field data to csv values so it can be imported into a spreadsheet. So a professor can create an on-line form and end up with the data from it in an Excell spreadsheet. Slick (when it works). I understand that I can make dovecot store messages in a file by leaving the trailing slash off when specifying the folder name. Sample procmail segment: :0: * Subject:.*\[feedback\] .feedback But I can't get the feedback folder to show up in the list of IMAP folders in my mail client. I've tried Outlook Express and Thunderbird. If I put the slash at the end, it creates a .feedback folder and then I can see it in my mail client. But then I can't export it to cvs. Anybody know why I can't see the .feeback folder? Or maybe somebody has a good way to get data from the body of messages stored in a dovecot folder, for example, .feedback/cur/ and .feedback/new/.

3 3

[Dovecot] Site down?
by Michael Blinn 05 Oct '06

05 Oct '06

I'm getting a 'Forbidden' when accessing dovecot.org.. Have we been rooted, or is this scheduled maintenance, or..? -Michael

2 1

[Dovecot] Website down? SSL2?
by Rick Romero 05 Oct '06

05 Oct '06

I think the website is down.. I can't get to the root, or any of the 'previously visited' links I still have in my browser. How do I turn off SSLv2 support?

1 0

[Dovecot] bug with rsh/ssh connections
by David Lee 05 Oct '06

05 Oct '06

(Using rc7 code) There seems to be a bug in rsh/ssh-style connections. For reference, on a normal imap connection (port 143, 993, etc.) things are OK. The imap session ends (from a client-end command "a logout") thus: --- a logout * BYE Logging out a OK Logout completed. Connection closed by foreign host. unix-prompt% --- But when the connection had been established using rsh or ssh to the servers's "/etc/rimapd" which contains: exec /usr/dovecot/sbin/dovecot --exec-mail imap the session ends thus: --- a logout * BYE Logging out a OK Logout completed. imap(<username>): Info: Disconnected: Logged out unix-prompt% --- Note that additional, protocol-breaking, "imap(...): Info ..." line. This seems to be coming from "imap/cmd-logout.c" calling: client_disconnect(client, "Logged out"); which in turn ("imap/client.c") does: i_info("Disconnected: %s", reason); On the imap connection, this "i_info(...)" output goes (correctly) to syslog, but on the rsh/ssh connection this output seems to go to something like stdout. This strongly suggests a bug: an inconsistency between the two connection types, possibly regarding the way that stdout, stderr, syslog etc. are initialised, assigned, adjusted, etc. -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : Durham University : : http://www.dur.ac.uk/t.d.lee/ South Road : : Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. :

1 0

[Dovecot] Bug: auth_cache breaks master password feature
by Bill Boebel 05 Oct '06

05 Oct '06

When you set auth_cache_size to a value greater than zero, it breaks the master password feature in Dovecot. It appears that during a cache hit, Dovecot attempts to query the userdb for use the master user's home directory and other settings, rather than querying for the userdb settings of the user that the master was trying to log in for... causing the login to fail. Perhaps caching the userdb settings in addition to the passdb settings (since that is on the TODO list) would indirectly fix this problem. Bill

2 1

[Dovecot] dovecot with vpopmail
by nq525＠singnet.com.sg 05 Oct '06

05 Oct '06

I have been using bincimap with vpopmail for awhile and would like to give dovecot a try. Does anyone has any success configuring dovecot with vpopmail? I have installed dovecot but didn't manage to get it up with vpopmail. It will be good if someone can share their settings on dovecot.conf with me. Thanks

1 0

[Dovecot] Can't load certificate file: cert already in hash table
by Peter Abrahamsen 05 Oct '06

05 Oct '06

Hi, I've searched for this error and found nothing. When I switch on SSL, I get the following errors: >>> Oct 3 20:05:23 [dovecot] Dovecot v1.0.rc7 starting up Oct 3 20:05:24 [dovecot] Login process died too early - shutting down Oct 3 20:05:24 [dovecot] imap-login: Can't load certificate file /etc/ssl/certs/dovecot.crt: error:0B07C065:x509 certificate routines:X509_STORE_add_cert:cert already in hash table Oct 3 20:05:24 [dovecot] pop3-login: Can't load certificate file /etc/ssl/certs/dovecot.crt: error:0B07C065:x509 certificate routines:X509_STORE_add_cert:cert already in hash table - Last output repeated twice - Oct 3 20:05:24 [dovecot] child 13344 (login) returned error 89 Oct 3 20:05:24 [dovecot] child 13345 (login) returned error 89 Oct 3 20:05:24 [dovecot] child 13346 (login) returned error 89 Oct 3 20:05:24 [dovecot] child 13347 (login) returned error 89 <<< This is Gentoo on amd64 with openssl 0.9.8d. The cert and key were generated with tinyca and openssl 0.9.8c (I know, I know, it's upgrading now). I made 'em the same way I made my ldap and apache certs, which work fine. Any pointers? Also, why am I given a numeric error code? Thanks, Peter

2 1

[Dovecot] Whatever happened to rc8?
by Charles Marcus 04 Oct '06

04 Oct '06

It sounded like there was going to be one, so that some of the fixes that didn't make it into rc7 could be easily tested before releasing 1.0? -- Best regards, Charles

2 2

[Dovecot] No inbox for user error
by Ron 04 Oct '06

04 Oct '06

Hi, I'm getting 'no inbox for user' error. Set up sendmail, and can send and receive mail using Webmin/Usermin both to internal addresses and external ones. But Dovecot gives the no inbox error. I've tried telnetting in and get: +OK dovecot ready. USER myob -ERR Unknown command USER myob +UK PASS <password> +OK Logged in. -ERR No INBOX for user. No idea why the first USER command gives an error. And, of course, when I try using Evolution I get 'Cannot get POP summary'. The Dovecot config file, less all the commented out bits is: imap_listen = [::] pop3_listen = [::] imaps_listen = [::] pop3s_listen = [::] ssl_cert_file = /etc/pki/dovecot/dovecot.pem ssl_key_file = /etc/pki/dovecot/private/dovecot.pem login_dir = /var/run/dovecot-login login_chroot = yes login = imap login_user = dovecot login = pop3 default_mail_env = mbox_locks = fcntl auth = default auth_mechanisms = plain auth_userdb = passwd auth_passdb = pam auth_user = root Any and all ideas very welcome. I'm a total newbie at this server business... Thanks in advance. Ron

1 0

[Dovecot] Hooks API
by Boris Ivanov 04 Oct '06

04 Oct '06

Hi Is it possible to make hook api? I mean universal hooks any commands of pop3/imap which can trigger your modules. Not just quota etc,,, Boris

3 4

Re: [Dovecot] Errors while doing make on Solaris 9 for dovecot-1.0.rc7
by Agarwal, Lalit 03 Oct '06

03 Oct '06

Thanks. make AR=ar works -----Original Message----- From: Timo Sirainen [mailto:tss@iki.fi] Sent: Monday, September 25, 2006 1:18 PM To: Agarwal, Lalit Cc: dovecot(a)dovecot.org Subject: Re: [Dovecot] Errors while doing make on Solaris 9 for dovecot-1.0.rc7 On 25.9.2006, at 16.41, Agarwal, Lalit wrote: > rm -f liblib.a > false cru configure has detected your "ar" binary to be "false", which really doesn't work. I'm not sure what the right way to fix this would be (see what config.log says about it), but one workaround at least would be if you ran make as: make AR=ar Of course if you don't have ar at all in the path, that's your problem. :) Looks like it exists in /usr/ccs/bin/.

1 0

[Dovecot] Dovecot as LDA
by Gerard Seibert 03 Oct '06

03 Oct '06

FreeBSD 6.1-RELEASE-p8 postfix-current-2.4.20060903,3 dovecot-1.0.r7 I am experiencing a problem with dovecot as an LDA. It will not deliver mail unless the mail directory is chmod'd to 1777. Below is an example of the log file output. The dovecot.log file had over a hundred entries similar to this: deliver(gerard): Error: open(/var/mail/.temp.scorpio.seibercom.net.1123.cd38cd4d82e1368f) failed: Permission denied deliver(gerard): Error: file_lock_dotlock() failed with mbox file /var/mail/gerard: Permission denied Obviously the /var/log/maillog had similar fail warnings. By changing the permission to 1777 on the /var/mail directory and running postsuper -r ALL, I was able to get the mail delivered. What I am trying to determine is if I really should have those settings on the directory, or if I have something configured wrong in either postfix or dovecot. Postfix will deliver mail without any problem so I think it has to do with dovecot although I am not sure what. -- Gerard

3 4

[Dovecot] Quota with quota dict and peruser quota, dovecot LDA needed?
by Peter Veerman 03 Oct '06

03 Oct '06

Hi, This mail sources from the thread with this topic title: Re: [Dovecot] [SOLVED] quota with: postfixadmin, postfix, mysql & dovecot As this title does no longer cover the topic i decided to start a new thread. I have set up quota:dict with the proxy::quotadict option and i'm not using dovecot LDA. My quota table is filled with records like username: pveerman(a)nemo.kabelfoon.net path: 0 current: 0 and the personal max-quota reported by the client is okay, but the current-quota is 0. What am I doing wrong here? Peter

1 1

[Dovecot] Dovecot accepts squirrelmail, rejects fetchmail
by M. Fioretti 01 Oct '06

01 Oct '06

Hello, this is a follow-up to the thread "Fetchmail can't talk to dovecot" http://www.dovecot.org/list/dovecot/2006-September/016477.html Increasing the log level I get this in the log filed: Sep 30 15:04:19 fm dovecot: Dovecot v1.0.rc7 starting up Sep 30 15:04:22 fm dovecot: auth(default): passwd-file /etc/dovecot_user_file: Read 1 users Sep 30 15:05:05 fm dovecot: auth(default): client in: AUTH 1 PLAIN service=IMAPsecured +lip=::ffff:SERVER_IP_HERE rip=::ffff:CLient_IP_HERE resp=LONG_STRING_HERE VDBB Sep 30 15:05:05 fm dovecot: auth(default): passwd-file(user_name,::ffff:CLIENT_IP_HERE): unknown user Sep 30 15:05:07 fm dovecot: auth(default): client out: FAIL 1 user=user_name Sep 30 15:05:07 fm dovecot: imap-login: Aborted login: user=<user_name>, method=PLAIN, rip=::ffff:CLIENT_IP_HERE, +lip=::ffff:SERVER_IP_HERE, TLS Remember that when the same user name and password come from Squirrelmail on the same host where dovecot runs, everything works. Why does it fail with fetchmail? what does that message "unknown user" exactly mean? Thank you in advance for any help, Marco

3 3

[Dovecot] [SOLVED] quota with: postfixadmin, postfix, mysql & dovecot
by Peter Veerman 01 Oct '06

01 Oct '06

Hi, I'm quite new to dovecot but already quite satisfied. Your documentation in the wiki is great but on quota + mysql it is not very clear. Because of the previously mentioned I have got the following note to make which you will hopefully use to adjust your wiki documentation on per-user-quota + mysql. I've searched your mail archive as good as possible and found no messages on this. If already messages have been exactly on this topic I want to apologize for sending this one. The notes I want to make is about this page: http://wiki.dovecot.org/Quota I'm using postfix + postfixadmin & mysql and dovecot (previously I used courier-imap instead of dovecot). The problems I ran in to was with setting up the per-user quota, as the explanation at the wiki is quite vague. For instance, the dict plugin is used to keep the quota counters in the mysql backend but only one single line shows how to set-up a per user quota. Setting up a per user quota where the max-quota is stored in mysql should be made making use of this setting: ========== user_query = SELECT home, uid, gid, 'dirsize:storage=' || quota_bytes AS quota FROM users WHERE userid = '%u' ========== nowhere is mentioned that this should also! be set: =========== protocol imap { mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota } =========== the second point I want to make is that the mysqlquery is incorrect as || does not do the job of joining the two strings. Secondly is dovecot making use of kilobytes instead of bytes like postfix (and postfixadmin) does. For this I have found the following solution: ========== user_query = SELECT maildir, 125 AS uid, 125 AS gid,\ CONCAT('dirsize:storage=', ROUND( mailbox.quota / 1024 ) ) AS quota \ FROM mailbox WHERE username = '%u' AND active = '1' ========== Here I select the quota field from the mailbox table. This is then divided by 1024 (1Kbyte) and ROUNDED off in order to get rid of the .00 that results from this division. Greetz, Peter Veerman pveerman NO-SPAM at NO-SPAM hackwerk DOT net

6 7

[Dovecot] fetchmail can't talk to dovecot
by M. Fioretti 30 Sep '06

30 Sep '06

Hello, I have dovecot q1.0-0_22.rc7 up and running on a server: I can read email from squirrelmail just fine. When I try to download email with fetchmail, however, I get the result below. Why is that happening? In dovecot.conf I have: protocols = imap imaps pop3, so why should pop3 or imap fail? Where should I look? (I'll fix the certificates problem after I've managed to get in successfully with plain imap or pop3) Thanks, Marco fetchmail: 6.3.2 querying my.server (protocol POP3) at Wed 27 Sep 2006 12:15:17 AM CEST: poll started fetchmail: POP3< +OK Dovecot ready. fetchmail: POP3> CAPA fetchmail: POP3< +OK fetchmail: POP3< CAPA fetchmail: POP3< TOP fetchmail: POP3< UIDL fetchmail: POP3< RESP-CODES fetchmail: POP3< PIPELINING fetchmail: POP3< STLS fetchmail: POP3< USER fetchmail: POP3< SASL PLAIN DIGEST-MD5 fetchmail: POP3< . fetchmail: POP3> STLS fetchmail: POP3< +OK Begin TLS negotiation now. fetchmail: Issuer Organization: SomeOrganization fetchmail: Issuer CommonName: localhost.localdomain fetchmail: Server CommonName: localhost.localdomain fetchmail: Server CommonName mismatch: localhost.localdomain != my.server fetchmail: my.server key fingerprint: ... fetchmail: Server certificate verification error: self signed certificate fetchmail: POP3> CAPA fetchmail: POP3< +OK fetchmail: POP3< CAPA fetchmail: POP3< TOP fetchmail: POP3< UIDL fetchmail: POP3< RESP-CODES fetchmail: POP3< PIPELINING fetchmail: POP3< USER fetchmail: POP3< SASL PLAIN DIGEST-MD5 fetchmail: POP3< . fetchmail: POP3> USER user_name fetchmail: POP3< +OK fetchmail: POP3> PASS * fetchmail: POP3< -ERR Authentication failed. fetchmail: Authentication failed. fetchmail: Authorization failure on user_name(a)my.server fetchmail: POP3> QUIT fetchmail: POP3< +OK Logging out fetchmail: 6.3.2 querying my.server (protocol POP3) at Wed 27 Sep 2006 12:15:21 AM CEST: poll completed fetchmail: Query status=3 (AUTHFAIL) fetchmail: Writing fetchids file. fetchmail: normal termination, status 3 fetchmail: Writing fetchids file. if I try with IMAP the part after the certificate verification error is: fetchmail: IMAP> A0003 CAPABILITY fetchmail: IMAP< * CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDRE N NAMESPACE LOGIN-REFERRALS AUTH=PLAIN AUTH=DIGEST-MD5 fetchmail: IMAP< A0003 OK Capability completed. fetchmail: Protocol identified as IMAP4 rev 1 fetchmail: IMAP> A0004 LOGIN "user_name" * fetchmail: IMAP< A0004 NO Authentication failed. fetchmail: IMAP> A0005 * fetchmail: Authorization failure on user_name(a)my.server fetchmail: IMAP> A0006 LOGOUT fetchmail: IMAP< A0005 BAD Error in IMAP command received by server. fetchmail: IMAP< * BYE Logging out and I don't see any error message related to this in the server log.

2 3

Re: [Dovecot] SSL errors
by Bill Boebel 29 Sep '06

29 Sep '06

On Fri, September 29, 2006 11:47 am, Charles Marcus <CMarcus(a)Media-Brokers.com> said: > Bill Boebel wrote: >> I have a Dovecot server set up as a proxy and getting a ton of these >> errors, but I'm not sure where to begin troubleshooting it. I'm >> hearing frequently that Outlook users who use IMAP with SSL are >> getting disconnected often as a result. Any suggestions?... > > Need more details... Dovecot version? Platform? > Sorry... Red Hat ES4 (2.6.9-42.0.2.EL), latest dovecot CVS 20060926. login_process_per_connection = no login_processes_count = 3 login_max_processes_count = 10 login_max_connections = 4000 login_process_size = 64 Also added this to the dovecot init script to allocate more file descriptors to dovecot: start() { echo -n $"Starting $prog: " + ulimit -n 16384 daemon /usr/sbin/dovecot Also, seeing this error occasionally... Sep 29 11:34:15 director4 dovecot: imap-login: SSL_write() syscall failed: Bad file descriptor [166.137.221.91] Maybe nothing to worry about now that I have increased "login_process_size". Checking with customers to see if the Outlook IMAP SSL disconnects are still frequently occurring. Thanks, Bill

1 0

[Dovecot] SSL errors
by Bill Boebel 29 Sep '06

29 Sep '06

I have a Dovecot server set up as a proxy and getting a ton of these errors, but I'm not sure where to begin troubleshooting it. I'm hearing frequently that Outlook users who use IMAP with SSL are getting disconnected often as a result. Any suggestions?... Sep 29 11:12:07 director4 dovecot: imap-login: SSL_accept() failed: error:1409C041:SSL routines:SSL3_SETUP_BUFFERS:malloc failure [64.81.197.28] Sep 29 11:12:07 director4 dovecot: imap-login: SSL_accept() syscall failed: EOF [24.236.204.154] Bill

2 1

Re: [Dovecot] SSL errors
by Bill Boebel 29 Sep '06

29 Sep '06

On Fri, September 29, 2006 11:23 am, Bill Boebel <bill(a)webmail.us> said: > I have a Dovecot server set up as a proxy and getting a ton of these errors, but > I'm not sure where to begin troubleshooting it. I'm hearing frequently that > Outlook users who use IMAP with SSL are getting disconnected often as a result. > Any suggestions?... > > Sep 29 11:12:07 director4 dovecot: imap-login: SSL_accept() failed: > error:1409C041:SSL routines:SSL3_SETUP_BUFFERS:malloc failure [64.81.197.28] > > Sep 29 11:12:07 director4 dovecot: imap-login: SSL_accept() syscall failed: EOF > [24.236.204.154] > Actually, I found in the archives that I should increase login_process_size if I'm not running with login_process_per_connection. I have done this and that seems to have taken care of the malloc failure. However I am still getting a ton of these every few seconds: Sep 29 11:30:06 director4 dovecot: imap-login: SSL_read() syscall failed: EOF [70.171.61.190] Sep 29 11:30:06 director4 dovecot: imap-login: SSL_read() syscall failed: EOF [24.236.204.154] Sep 29 11:30:06 director4 dovecot: imap-login: SSL_read() syscall failed: EOF [70.171.61.190] Sep 29 11:30:08 director4 dovecot: imap-login: SSL_read() syscall failed: EOF [65.242.19.3]

2 1

[Dovecot] Passdb passwd on FreeBSD
by Jim Flowers 29 Sep '06

29 Sep '06

I am trying to use dovecot for both virtual and local pop3 mailboxes. When I try to access a local account, I get an "unknown user" reject from 'passdb sql', as expected. However, I also get a reject from 'passdb pam' with the message: dovecot: auth(default_with_listener): pam(username(a)domain.tld,###.###.###.###): pam_authenticate() failed: authentication error. Is this because it is trying to authenticate username(a)domain.tld instead of just username? What can I do about it? Although I have a block for 'passdb passwd' following the 'passdb pam' block, there is nothing in the log. Why is this, I wonder? Any help to point me in the right direction will be appreciated. Thanks. -- Jim Flowers <jflowers(a)ezo.net> -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

1 0

[Dovecot] Quota plugin rewrite
by Timo Sirainen 28 Sep '06

28 Sep '06

Backported from CVS HEAD to branch_1_0. You can get it as a patch from http://dovecot.org/patches/1.0/quota-rewrite.diff New features include support for multiple quota roots, so you could have eg. per-user quota and a larger domain quota (although no backend actually supports this yet..). The more important feature is that you can configure specific mailboxes to have a bit more space available for them, such as Trash or Spam. The configuration has also changed. Normally you'd use something like this: quota = maildir # 1GB quota in general quota_rule = *:storage=1048576 # Trash mailbox gets 100MB more (so max. 1,1GB) quota_rule2 = Trash:storage=102400 # Spam mailbox gets also +100MB (still maxes at 1,1GB, not 1,2GB) quota_rule3 = Spam:storage=102400 You can place all the above into plugin { .. } section in dovecot.conf. In userdb if users have different quotas you'd then need to override only quota_rule (not quota, quota_rule2 and quota_rule3). I tested quickly that this seemed to work as described above. Please test and report. :)

2 6

[Dovecot] [BUG(let)] Dovecot does not recognize threaded/reentrant mysql libs
by OpenMacNews 28 Sep '06

28 Sep '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hi, i build mysql (currently v5.0.22) on OSX 10.4.7 w/ threading enabled. i.e., i build the reentrant libs: libmysqlclient_r.dylib rather than the 'usual': libmysqlclient.dylib currently, to make Dovecot 'play nice' and recognize the reentrant libs, I: perl -pi -e 's/AC_CHECK_LIB\(mysqlclient,/AC_CHECK_LIB\(mysqlclient_r,/g' configure.in perl -pi -e 's/mysql_lib=\"\-lmysqlclient \-lz \-lm"/mysql_lib=\"\-lmysqlclient_r \-lz \-lm\"/g' configure.in then: autoreconf -i -f before configure, etc. subsquent build/exec/function all seem OK with this mod, and the linked, reentrant mysql lib: ls -al /usr/local/dovecot/libexec/dovecot/dovecot-auth -rwxr-xr-x 1 root wheel 950616 Sep 28 09:59 /usr/local/dovecot/libexec/dovecot/dovecot-auth otool -L /usr/local/dovecot/libexec/dovecot/dovecot-auth /usr/local/lib/libiconv.2.dylib (compatibility version 7.0.0, current version 7.0.0) /usr/lib/libpam.1.dylib (compatibility version 1.0.0, current version 1.0.0) /usr/local/mysql/lib/mysql/libmysqlclient_r.15.dylib (compatibility version 16.0.0, current version 16.0.0) /usr/local/lib/libreadline.5.1.dylib (compatibility version 5.0.0, current version 5.1.0) /usr/local/ncurses/lib/libncurses.5.5.dylib (compatibility version 5.5.0, current version 5.5.0) /usr/lib/libSystem.B.dylib (compatibility version 1.0.0, current version 88.1.6) /usr/local/ssl/lib/libssl.0.9.8.dylib (compatibility version 0.9.8, current version 0.9.8) /usr/local/ssl/lib/libcrypto.0.9.8.dylib (compatibility version 0.9.8, current version 0.9.8) /usr/local/lib/libz.1.dylib (compatibility version 1.0.0, current version 1.2.3) /usr/lib/libgcc_s.1.dylib (compatibility version 1.0.0, current version 1.0.0) once verified that these changes are sufficient (anybody else got eyeballs on this?), a conditional in configure should do ... richard - -- /"\ \ / ASCII Ribbon Campaign X against HTML email, vCards / \ & micro$oft attachments [GPG] OpenMacNews at gmail dot com fingerprint: 50C9 1C46 2F8F DE42 2EDB D460 95F7 DDBD 3671 08C6 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (Darwin) iEYEARECAAYFAkUcAcUACgkQlffdvTZxCMYQXACgustNRKkqu97hWI88CTQwxZG7 q10AniSAcnhYesxf68x4y5Z7pg6uf/2f =py2/ -----END PGP SIGNATURE-----

1 0

[Dovecot] LDA and chroot
by Uldis Pakuls 28 Sep '06

28 Sep '06

Hi, I'd like to ask: is it possible to use Dovecot's LDA with mail_chroot variable set, e.g. "mail_chroot = /serv/storage19/vmail"? Without "mail_chroot" set all works fine. If mail_chroot is set and user database contains relative paths to home directory (without chroot part like "domain.net/user") deliver ignores this and tries to work at real root, while imap and pop3 processes founds home directory correctly. If users database contains full paths deliver works correctly, but imap/pop3 processes tries to access chroot directory + full path (and fails). Home directory in form "/chroot/path/./domain.net/user" solves the problem..., but as I understand, it is jut form to override default. Thus I can't find a way to correctly set default chroot path. Any suggestions? Tnx, Uldis

1 0

[Dovecot] LDA directly to Maildir/cur
by Scott Murman 28 Sep '06

28 Sep '06

i'm tired of dealing with buggy clients so i'm moving more processing into the server-side. i configured procmail as LDA with maildir-style mailboxes. i would like to simulate an automatic "mark as read" feature during procmail processing. simplest way looks to be forcing delivery directly to Maildir/cur instead of Maildir/new, but i suspect this may screw up dovecot. will this work? is there another (better) method? -SM-

3 3

[Dovecot] dovecot checkpassword passdb and vmailmgr
by Mij 28 Sep '06

28 Sep '06

hello some times ago I posted some patches to workaround vmailmgr not fitting into dovecot's passdb-checkpassword authentication module. Yesterday I spent some spare time for carrying out a cleaner solution for this problem. Check out these patches. If you're not interested in merging them, I will make them available at the same page I used for the former solution [ http://mij.oltrelinux.com/net/dovecot-qmail-vmailmgr ]; there were some 20 people/month that checked it out. This is a brief explanation of the patches: The root of all evil is that the checkpassword interface [ http://cr.yp.to/checkpwd/interface.html ] leaves room to interpretation when the scope is not system login. Vmailmgr and vpopmail, for example, collapse many mail users on the same system account. So, what "home" is here is not specified. In the case of vmailmgr, it's "checkvpw" sets HOME to the system user's home, and returns the path of the actual mail user differently. The solution I applied for this problem is to generalize the process that fetches authentication data (what currently is "checkpassword- reply"). I was set up for a specific passdb-vmailmgr module, but this would have seen a lot of code replication. Similarly (but I did not inspect further), I guess vpopmail can fit in this solution as well. So 1) provide a module "vmailmgr-reply", with the same behavior as checkpassword-reply, that's aware of the way checkvpw returns accounting information and pass this back to dovecot transparently so, this patch ships vmailmgr-reply along with checkpassword-reply (name them "fetcher"s for brevity) The idea is that every checkpassword-compatible module may have its own fetcher for passing correct info back to dovecot. Now with this generalization, the user must be able to specify if its checkpassword module needs a custom fetcher, and if it does, what's its path. So 2) modify auth/passdb-checkpassword.c and pump "args =". By default it takes the path of the checkpassword module (e.g. "checkvpw"), now it can be appended another field, that is the path of the custom fetcher. If this optional is omitted, the default checkpassword-reply will be used, and the cp module is supposed to behave like dovecot expects from it. Otherwise, a comma appear after the first path. e.g. passdb checkpassword { args = /xyz/checkvpw,/libexec/vmailmgr-reply } if one needs to specify paths with commas in the first one, commas can be escaped with \ (eg args=first\,path,second_path) Last but not least, the patch addresses again the problem with colons in paths. Currently, dovecot dictates no colons can exist in mailbox path names. In UNIX, no such constraint exist. Moreover, paths with colons are common when working specifically with qmail (see dot-qmail). When dovecot encounters ':', it truncates the path. This way, for example, if the authentication module returned home "/ path/name:surname", dovecot will truncante it to "/path/name". If name exist, name:surname will browse his mail without effort. All this comes from dovecot parsing params on MAIL environment (INDEX, INBOX, CONTROL), but it also happens if none of them was actually specified. So 3) modify lib-storage/index/maildir/maildir-storage.c for fixing the parsing problem with the mail environment. [ I did not provide the same fix for the remaining storages, but this can easily be done by copy/paste if convenient ]. For simplification and without loss of generality, this fix mandates ":INBOX=", ":INDEX=" and ":CONTROL=" params to follow in this order, if they appear. [ a minor patch agains auth/Makefile.am is provided for including vmailmgr-reply when building the rest of the auth stuff ] Any comment on this is welcome for discussion. bye

1 0

[Dovecot] Big sites using Dovecot
by Jonathan 28 Sep '06

28 Sep '06

Hi, Are there any big Dovecot sites (say 50,000-100,000) users on this list? What sort of hardware do you use. What sort of problems do you see? Many thanks, Jonathan.

14 22

Re: [Dovecot] syslog messages
by Rich West 27 Sep '06

27 Sep '06

After commenting out the "passdb pam" section and uncommenting "passdb ldap", with the "args = /etc/dovecot-ldap.conf", the syslog messages went completely away, and everything continued to work. I just thought I would mention it in the event that anyone else was seeing similar problems in the future. :) -Rich > > (I sent this last night, but to the wrong address.. argh) > > After an upgrade to FC5, and a rebuild and install of dovecot 1.0RC7, > > I've been getting a LOT of syslog messages like the following: > > Sep 26 21:47:55 myhost dovecot-auth: nss_ldap: reconnected to LDAP > > server ldap://ldap.mydomain.com after 1 attempt > > > > Now, everything is working fine as far as I can tell (it's only been a > > rocky day since the upgrade.. and that was littered with other LDAP > > related problems), but I was wondering why it was even using > > nss_ldap... I have dovecot configured to connect to LDAP directly. > > > > My dovecot.conf contains: > > auth default { > > # Space separated list of wanted authentication mechanisms: > > # plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi > > mechanisms = plain > > ... > > passdb pam { > > } > > ... > > # LDAP database > > #passdb ldap { > > # Path for LDAP configuration file, see doc/dovecot-ldap.conf for > > example > > #args = > > #} > > ... > > # LDAP database > > userdb ldap { > > # Path for LDAP configuration file, see doc/dovecot-ldap.conf for > > example > > args = /etc/dovecot-ldap.conf > > } > > > > And I am wondering if I missed something obvious here... > > > > I'm going to try commenting out the "passdb pam" section, uncommenting > > the "passdb ldap" section and see if that allows for everything to go > > directly to LDAP (and not rely on nss_ldap or pam_ldap). > > > > -Rich > > >

1 0

Re: [Dovecot] support for UW-style mbox
by Rich West 27 Sep '06

27 Sep '06

> UW-IMAP will automatically append the contents of /var/spool/mail/user to > ~user/mbox (and then clear /var/spool/mail/user) if ~user/mbox exists. > I'd like to mimic that action with Dovecot. (I'm probably going to be unlucky, > as an earlier respondent pointed out). > > Sorry to show my ignorance, but I thought delivery was a function > of the MTA (Exim in my case), which would require a change to my exim > config file, and would probably not then be a per-user thing. > (i.e. with UW-IMAP, if ~user/mbox doesnt exist, mail gets left in > /var/spool/mail/user). > I need to read about dovecot.conf No, you are correct. Delivery is handled by the MTA. Dovecot just needs to know where to access it. By default, for example, with Sendmail, it will place the email in /var/spool/mail (unless you change some back-end code somewhere along the line), and then you can use procmail (with a global procmailrc file in /etc) to place the mail where you want it to go.. I haven't used UW-IMAP in a while now (well over a year and a half). I stopped using it at all of my supported sites because, even though it was simple to manage, it was just way too slow. From what I remember, the UW implementation is such that UW-IMAP will read from the user's mbox file if it exists, and if it doesn't, it will read from <spooldir>/<username> (in this case, /var/spool/mail/user). UW-IMAP (or any IMAP) wouldn't actually do the delivery, so writing to the spool directory temporarily and then moving it to the home directory shouldn't actually happen. However, I don't truly remember how it worked under the hood, but that just doesn't seem right to me (too much chance for conflict). I do remember (back in the day) the headaches we would get when trying to debug a "lost mail" problems (with a centralized /var/spool/mail directory) and it turned out the user in question had created an mbox file which had next to nothing in it. :) -Rich

2 2

[Dovecot] syslog messages
by Rich West 27 Sep '06

27 Sep '06

(I sent this last night, but to the wrong address.. argh) After an upgrade to FC5, and a rebuild and install of dovecot 1.0RC7, I've been getting a LOT of syslog messages like the following: Sep 26 21:47:55 myhost dovecot-auth: nss_ldap: reconnected to LDAP server ldap://ldap.mydomain.com after 1 attempt Now, everything is working fine as far as I can tell (it's only been a rocky day since the upgrade.. and that was littered with other LDAP related problems), but I was wondering why it was even using nss_ldap... I have dovecot configured to connect to LDAP directly. My dovecot.conf contains: auth default { # Space separated list of wanted authentication mechanisms: # plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi mechanisms = plain ... passdb pam { } ... # LDAP database #passdb ldap { # Path for LDAP configuration file, see doc/dovecot-ldap.conf for example #args = #} ... # LDAP database userdb ldap { # Path for LDAP configuration file, see doc/dovecot-ldap.conf for example args = /etc/dovecot-ldap.conf } And I am wondering if I missed something obvious here... I'm going to try commenting out the "passdb pam" section, uncommenting the "passdb ldap" section and see if that allows for everything to go directly to LDAP (and not rely on nss_ldap or pam_ldap). -Rich

1 0

Re: [Dovecot] Big sites using Dovecot
by Bill Boebel 27 Sep '06

27 Sep '06

On Thu, September 21, 2006 1:14 pm, Jonathan <dovecot(a)redigloo.org> said: > Are there any big Dovecot sites (say 50,000-100,000) users on this > list? Yes, Webmail.us. Many multiples of that number :) > What sort of hardware do you use. 80 backend IMAP servers. 5 front-end IMAP-proxy servers. All running Dovecot. The boxes are single AMD CPU, 1GB RAM, and 4 SATA drives. DRBD used to replicate data between servers. > What sort of problems do you see? Dovecot doesn't need much CPU, but it needs a lot of disk. So give it lots of spindles, either in one big box or many small boxes like we do. Right now the only problem we have is the Dovecot proxy software sometimes disconnects imap sessions that it should not disconnect. Since Timo is very busy, we are working on a patch for this. http://www.dovecot.org/list/dovecot/2006-August/015401.html Bill

3 2

[Dovecot] SSL_accept failed
by Timothy Martin 26 Sep '06

26 Sep '06

Hello, I'm new to dovecot. I just installed it a few days ago on FreeBSD via the ports and got it up and running without too much trouble. Although yesterday I turned on the SSL/TLS features and tried to get secure connections to work. I don't get any error messages when launching dovecot, I saw it successfully create the SSL parameters after first enabling the feature yet I can't seem to get a successful connection. Normal non- ssl connections work fine. What happens: 1) my client claims to be attempting the connection. 2) things go on for some time with nothing happening 3) finally the dovecot log pops up with these messages dovecot: Sep 09 02:25:23 Warning: imap-login: SSL_accept() syscall failed: EOF [x.x.x.x] dovecot: Sep 09 02:25:23 Info: imap-login: Disconnected: rip=x.x.x.x, lip=x.x.x.x, TLS handshake dovecot: Sep 09 02:26:23 Info: imap-login: Disconnected: Inactivity: rip=x.x.x.x, lip=x.x.x.x, TLS handshake FYI: I've regenerated a fresh cert and key, just for dovecot and I'm using Mac OS X's Mail client. Any clues? .tim

6 17

[Dovecot] log tools with html for dovecot
by Robert Schetterer 26 Sep '06

26 Sep '06

Hi @ll, are there any recommandations for logging tools with html display for dovecot thx -- Diese Nachricht wurde auf Viren und andere gefährliche Inhalte untersucht und ist - aktuelle Virenscanner vorausgesetzt - sauber.

2 2

[Dovecot] Error: pipe() failed: Too many open files
by Dirk Essl 26 Sep '06

26 Sep '06

Hi, I am currently migrating a big bunch of mail accounts to a dovecot server running 1.0rc2 on Solaris 10 suddenly all imap processes died and I see this in my dovecot.log: dovecot: Sep 26 14:54:31 Error: pipe() failed: Too many open files dovecot: Sep 26 14:54:31 Fatal: dup2(stderr) failed: Bad file number dovecot: Sep 26 14:54:31 Error: child 29376 (imap) returned error 89 dovecot: Sep 26 15:15:48 Error: pipe() failed: Too many open files dovecot: Sep 26 15:15:48 Fatal: dup2(stderr) failed: Bad file number dovecot: Sep 26 15:15:49 Error: child 1563 (imap) returned error 89 dovecot: Sep 26 15:15:55 Error: pipe() failed: Too many open files dovecot: Sep 26 15:15:55 Fatal: dup2(stderr) failed: Bad file number dovecot: Sep 26 15:15:55 Error: child 1572 (imap) returned error 89 dovecot: Sep 26 15:15:58 Error: pipe() failed: Too many open files dovecot: Sep 26 15:15:58 Fatal: dup2(stderr) failed: Bad file number dovecot: Sep 26 15:15:58 Error: child 1577 (imap) returned error 89 dovecot: Sep 26 15:18:25 Error: pipe() failed: Too many open files dovecot: Sep 26 15:18:25 Fatal: dup2(stderr) failed: Bad file number dovecot: Sep 26 15:18:25 Error: child 1659 (imap) returned error 89 dovecot: Sep 26 15:18:27 Error: pipe() failed: Too many open files dovecot: Sep 26 15:18:27 Fatal: dup2(stderr) failed: Bad file number dovecot: Sep 26 15:18:27 Error: child 1662 (imap) returned error 89 dovecot: Sep 26 15:18:32 Error: socketpair() failed: Too many open files dovecot: Sep 26 15:18:32 Error: Temporary failure in creating login processes, slowing down for now dovecot: Sep 26 15:18:32 Error: pipe() failed: Too many open files what could cause the error? is this from Solaris or from dovecot? TIA dirk

2 1

[Dovecot] Not getting new mail notification
by Robert Creager 26 Sep '06

26 Sep '06

Hey all, I'm having no luck getting new mail notification except in two mail folders (using maildir w/procmail delivery). I'm using three different clients (sylpheed-claws 1.9.14, Thunderbird 1.5.0.5 and a newer version of Horde). None of them are getting new mail in any except these two folders (inbox and 1 other). If I browse to the folders, still nothing. If I browse to the folders with Horde, I see the new mail, but not always in the other clients. It's hit or miss if the other clients get notified of the mail, but the mail is moved from the new folder. I'm subscribed to the folders and have them to be checked for new messages (in Thunderbird). I tried using dnotify, and things got worse (no folders updated). I've over 350 e-mails sitting in new folders right now: [robert@thunder Maildir]$ ls .*/new | wc 397 332 12925 One interesting item I noticed is that if I touch a file in a new directory (or vi it), I immediately get notification of the mail (and it gets moved from new to cur). I'm running dovecot 1.0 RC7 configured as ./configure --sysconfdir=/etc/dovecot --with-pgsql --with-pam --localstatedir=/var with the following changes to the config: base_dir = /var/lib/dovecot/ protocols = imaps ssl_cert_file = /etc/ssl/dovecot/certs/dovecot.pem ssl_key_file = /etc/ssl/dovecot/private/dovecot.pem default_mail_env = maildir:%h/Maildir verbose_proctitle = yes protocol imap { imap_client_workarounds = tb-extra-mailbox-sep } I'm running dovecot through xinetd: service imaps { disable = no socket_type = stream protocol = tcp wait = no user = root server = /usr/local/libexec/dovecot/imap-login flags = IPv4 server_args = --ssl } Linux thunder.logicalchaos.org 2.6.12-12-3 #5 SMP Wed Feb 1 23:59:03 MST 2006 i686 AMD Athlon(tm) MP 2600+ unknown GNU/Linux Help? Thanks, Rob

9 31

[Dovecot] Preforming an action/trigger after a user successfully authenticates
by Dan Trainor 26 Sep '06

26 Sep '06

Hi - I have searched the docs for v1.0 RC7, but cannot find what I'm looking for. What I'm ultimately wanting to do is have Dovecot preform some action, or a trigger, when the user is successfully authenticated. Even more specifically, I'd like to run another SQL query to record a date/time for last authenticated login. Short from running a script during logrotate, or constantly tailing the log, is there any mechanism in Dovecot that would allow me to do this? Again, all I'm looking to do is to record the last date/time that someone successfully logged in, into a MySQL database. Thanks! -dant

3 7

[Dovecot] Dovecot Usage Poll
by Jackie Hunt 25 Sep '06

25 Sep '06

Hi all, I'm trying to get a feel for how many sites are using Dovecot and the size of the installation. Jonathan's query about big sites spurred my curiousity. I'd like to take an informal poll and will post results to the list. I'm interested in hearing from those of you who are using dovecot in a real-life/production type environment (not just testing). Please email me directly [jackie.hunt(a)colostate.edu] and send the following info: (1) Type of organization: commercial/government/educational/etc. (2) Number of users supported with Dovecot (3) Approx. length of time you've used Dovecot in "production" (4) Whether or not you are using the Dovecot LDA Thanks much, Jackie --- Jackie Hunt ACNS Voice: (970) 663-3789 Colorado State University FAX: (970) 491-1958 Fort Collins, CO 80523 Email: jackie.hunt(a)colostate.edu

7 7

[Dovecot] DSpam mysql-plugin (was DSpam plugin)
by Michael Blinn 25 Sep '06

25 Sep '06

After wrestling with Johannes's original plugin, I had a go at the mysql plugin that Tim wrote, as described here: http://members.plug.org.au/~linuxalien/dokuwiki/projects:dovecot-mysql-dspa… I kept getting "Error: imap dump-capability process killed with signal 11" when attempting to start dovecot with this plugin. I traced the error to line 656 of master-settings.c in the dovecot source, in the 'get_imap_capability' function. In this function, it notes: "Reloading configuration. Don't try to execute the imap process again. Too risky and the wait() call below will break it anyway. Just use the previous capability list we already had generated." I changed the source so that the function always ran " set->imap_generated_capability = p_strdup(settings_pool, generated_capability); return TRUE;" instead of going through the function where it had on the wait described in the comments. Now, voila. Dovecot starts without complaint, the plugin works, the delivery and moving of email works. I'm assuming I've screwed something up by skipping the rest of this get_imap_capability function. My C skills are a few years rusty. What are the ramifications of skipping the remainder of this function? Thanks, Michael

7 8

[Dovecot] Moving to dovecot
by Ian C. Quorn 25 Sep '06

25 Sep '06

We're in the process of moving to Dovecot. We're currently running UW-IMAP live with Dovecot 1.0rc7 on alternate ports for testing. We're set to switch to Dovecot tomorrow morning, and I'm sure I'll have lots of stupid questions once that happens. So I guess you can consider this message an introduction as well as a preemptive apology. Our setup: our mailserver is a SunFire 880 running solaris 8. Inboxes are stored in /var/mail, home directories are in /home. Mailboxes are mbox. Both /home and /var/mail are NFS-mounted from a NetApp filer. Indexes are stored in /dovecot (this is a partition on local disk). We have about 500 users accesing their mail on this server. Supported clients are Outlook, Mac Mail, and Thunderbird (both PC and Mac). Many people access their mail via webmail (IMP Horde) instead of or in addition to using a normal client. We also have a few people who use Pine. Authentication is against the local shadow file. Given this setup, do the following config lines seem sane? login_process_per_connection = no login_max_connections = 256 default_mail_env = mbox:~/mail/:INBOX=/var/mail/%u:INDEX=/dovecot/%u namespace private { separator = / prefix = inbox = yes } # for backwards compatibility: namespace private { separator = / prefix = mail/ hidden = yes } namespace private { separator = / prefix = ~/mail/ hidden = yes } namespace private { separator = / prefix = ~%u/mail/ hidden = yes } mail_read_mmaped = no mmap_disable = no mmap_no_write = no lock_method = fcntl mbox_read_locks = dotlock mbox_write_locks = dotlock imap_client_workarounds = outlook-idle tb-extra-mailbox-sep pop3_uidl_format = %08Xv%08Xu pop3_client_workarounds = outlook-no-nuls oe-ns-eoh The namespace stuff came from http://wiki.dovecot.org/Namespaces - it was listed as a way to allow backwards-compatability with UW-IMAP. So, anything there look like a bad idea? Any other config parameters I might want to tweak, tune, or otherwise take a look at? So far dovecot's been pretty much trouble-free in our testing. But I have noticed some error messages in the logs. Anyone know what these mean? Are they anything I should panic over? dovecot: Sep 25 09:34:19 Error: IMAP(cliftoja): UIDVALIDITY changed (1034876030 -> 1159201281) in mbox file /home/wcts/cliftoja/mail/Common installation codes dovecot: Sep 25 09:50:24 Error: IMAP(cliftoja): UIDVALIDITY changed (1156881790 -> 1159202005) in mbox file /home/wcts/cliftoja/mail/Junk dovecot: Sep 25 10:04:01 Error: imap-login: Master sent reply with unknown tag 180 dovecot: Sep 25 10:04:01 Error: child 1078 (login) returned error 89 dovecot: Sep 25 10:18:58 Error: login: tried to change state 0 -> 44 (if you can't login at all, see src/lib/fdpass.c) Thanks in advance, and here's to (hopefully) a trouble-free Dovecot migration (hey, it can't be worse than UW-IMAP). Ian Quorn System Administrator Whitman College Technology Services

1 0

[Dovecot] support for UW-style mbox
by T. Horsnell 25 Sep '06

25 Sep '06

Hi, The dovecot docs say that support for the automatic appending of /var/spool/mail to a ~user/mbox (as is done by UW-IMAP) may be implemented in the near future. Is this still the case? And if so, is it far off? Cheers, Terry.

4 4

[Dovecot] Auth problem
by Riccardo Bini 25 Sep '06

25 Sep '06

Dovecot 1.07rc1 on ubuntu 6.04 I get the following problem: root 26375 0.0 0.2 5548 2240 ? Ss Sep15 1:39 /usr/sbin/dovecot root 26376 0.0 0.3 7896 3364 ? S Sep15 0:31 \_ dovecot-auth root 26378 0.0 0.3 8304 3824 ? S Sep15 0:34 \_ dovecot-auth root 26379 0.0 0.4 8668 4152 ? S Sep15 0:38 \_ dovecot-auth root 32660 0.0 0.2 7340 2856 ? S Sep15 0:00 | \_ dovecot-auth root 2968 0.0 0.2 7260 2728 ? S Sep15 0:00 | \_ dovecot-auth root 24559 0.0 0.2 7260 2768 ? S Sep16 0:00 | \_ dovecot-auth root 24771 0.0 0.2 7260 2768 ? S Sep16 0:00 | \_ dovecot-auth root 6265 0.0 0.2 7376 2788 ? S Sep18 0:00 | \_ dovecot-auth root 11988 0.0 0.2 7376 2900 ? S Sep18 0:00 | \_ dovecot-auth root 13865 0.0 0.2 7584 3044 ? S Sep18 0:00 | \_ dovecot-auth root 337 0.0 0.3 7704 3148 ? S Sep19 0:00 | \_ dovecot-auth root 407 0.0 0.3 7704 3148 ? S Sep19 0:00 | \_ dovecot-auth root 1321 0.0 0.3 7704 3160 ? S Sep19 0:00 | \_ dovecot-auth root 1361 0.0 0.3 7784 3292 ? S Sep19 0:00 | \_ dovecot-auth root 1645 0.0 0.3 7784 3312 ? S Sep19 0:00 | \_ dovecot-auth root 1673 0.0 0.3 7704 3196 ? S Sep19 0:00 | \_ dovecot-auth root 1867 0.0 0.3 7704 3204 ? S Sep19 0:00 | \_ dovecot-auth root 2033 0.0 0.3 7704 3212 ? S Sep19 0:00 | \_ dovecot-auth root 2067 0.0 0.3 7704 3224 ? S Sep19 0:00 | \_ dovecot-auth root 2148 0.0 0.3 7880 3368 ? S Sep19 0:00 | \_ dovecot-auth root 2308 0.0 0.3 7880 3376 ? S Sep19 0:00 | \_ dovecot-auth root 2420 0.0 0.3 7880 3384 ? S Sep19 0:00 | \_ dovecot-auth root 2571 0.0 0.3 7880 3396 ? S Sep19 0:00 | \_ dovecot-auth root 2779 0.0 0.3 7880 3420 ? S Sep19 0:00 | \_ dovecot-auth root 2888 0.0 0.3 7880 3432 ? S Sep19 0:00 | \_ dovecot-auth root 3049 0.0 0.3 7800 3324 ? S Sep19 0:00 | \_ dovecot-auth root 3298 0.0 0.3 7904 3332 ? S Sep19 0:00 | \_ dovecot-auth root 3514 0.0 0.3 7984 3464 ? S Sep19 0:00 | \_ dovecot-auth root 3710 0.0 0.3 7984 3468 ? S Sep19 0:00 | \_ dovecot-auth root 6463 0.0 0.3 7904 3388 ? S Sep19 0:00 | \_ dovecot-auth root 6464 0.0 0.3 7904 3456 ? S Sep19 0:00 | \_ dovecot-auth root 6465 0.0 0.3 7904 3388 ? S Sep19 0:00 | \_ dovecot-auth root 10289 0.0 0.3 7904 3420 ? S Sep19 0:00 | \_ dovecot-auth root 11144 0.0 0.3 7968 3452 ? S Sep19 0:00 | \_ dovecot-auth root 12018 0.0 0.3 8176 3636 ? S Sep19 0:00 | \_ dovecot-auth root 12561 0.0 0.3 8096 3540 ? S Sep19 0:00 | \_ dovecot-auth root 14090 0.0 0.3 8176 3724 ? S Sep19 0:00 | \_ dovecot-auth root 14728 0.0 0.3 8096 3592 ? S Sep19 0:00 | \_ dovecot-auth root 15442 0.0 0.3 8176 3736 ? S Sep19 0:00 | \_ dovecot-auth root 16329 0.0 0.3 8288 3796 ? S Sep19 0:00 | \_ dovecot-auth root 18818 0.0 0.3 8208 3684 ? S Sep19 0:00 | \_ dovecot-auth root 3228 0.0 0.3 8388 3892 ? S Sep20 0:00 | \_ dovecot-auth root 5596 0.0 0.3 8308 3764 ? S Sep20 0:00 | \_ dovecot-auth root 12477 0.0 0.3 8308 3804 ? S Sep20 0:00 | \_ dovecot-auth root 14008 0.0 0.3 8404 3848 ? S Sep20 0:00 | \_ dovecot-auth root 14742 0.0 0.3 8484 3980 ? S Sep20 0:00 | \_ dovecot-auth root 15133 0.0 0.3 8404 3860 ? S Sep20 0:00 | \_ dovecot-auth root 16170 0.0 0.3 8484 4028 ? S Sep20 0:00 | \_ dovecot-auth root 16327 0.0 0.3 8404 3908 ? S Sep20 0:00 | \_ dovecot-auth root 19848 0.0 0.3 8604 4140 ? S Sep20 0:00 | \_ dovecot-auth root 20278 0.0 0.4 8692 4188 ? S Sep20 0:00 | \_ dovecot-auth root 20746 0.0 0.4 8692 4200 ? S Sep20 0:00 | \_ dovecot-auth root 22057 0.0 0.3 8612 4072 ? S Sep20 0:00 | \_ dovecot-auth root 24303 0.0 0.3 8612 4084 ? S Sep20 0:00 | \_ dovecot-auth root 6514 0.0 0.4 8888 4356 ? S 10:32 0:00 | \_ dovecot-auth root 26380 0.0 0.3 8120 3660 ? S Sep15 0:31 \_ dovecot-auth root 32218 0.0 0.3 7952 3444 ? S Sep15 0:27 \_ dovecot-auth What means? Ciao Rick

2 1

[Dovecot] Errors while doing make on Solaris 9 for dovecot-1.0.rc7
by Agarwal, Lalit 25 Sep '06

25 Sep '06

Hi, I have Solaris 9 and I am getting the following errors for dovecot-1.0.rc7 after running 1.configure - No errors see output as attached 2. /usr/ccs/bin/make -- partial output below, complete attached Thanks, Lalit ..... DEPDIR=.deps depmode=none /bin/bash ../../depcomp \ gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -c var-expand.c source='write-full.c' object='write-full.o' libtool=no \ DEPDIR=.deps depmode=none /bin/bash ../../depcomp \ gcc -DHAVE_CONFIG_H -I. -I. -I../.. -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -c write-full.c rm -f liblib.a false cru liblib.a base64.o bsearch-insert-pos.o buffer.o close-keep-errno.o compat.o data-stack.o env-util.o failures.o fd-close-on-exec.o fd-set-nonblock.o fdpass.o file-cache.o file-copy.o file-dotlock.o file-lock.o file-set-size.o hash.o hex-binary.o hex-dec.o hmac-md5.o home-expand.o hostpid.o imem.o iostream.o istream.o istream-data.o istream-file.o istream-limit.o istream-mmap.o istream-seekable.o ioloop.o ioloop-iolist.o ioloop-notify-none.o ioloop-notify-dn.o ioloop-notify-inotify.o ioloop-notify-kqueue.o ioloop-poll.o ioloop-select.o ioloop-epoll.o ioloop-kqueue.o lib.o lib-signals.o md4.o md5.o mempool.o mempool-alloconly.o mempool-datastack.o mempool-system.o mempool-unsafe-datastack.o mkdir-parents.o mmap-anon.o mmap-util.o module-dir.o mountpoint.o network.o nfs-workarounds.o ostream.o ostream-file.o ostream-crlf.o primes.o printf-upper-bound.o process-title.o randgen.o read-full.o restrict-access.o restrict-process-size.o safe-memset.o safe-mkdir.o sendfile-util.o seq-range-array.o sha1.o str.o str-sanitize.o strescape.o strfuncs.o unix-socket-create.o unlink-directory.o unlink-lockfiles.o utc-offset.o utc-mktime.o var-expand.o write-full.o *** Error code 255 make: Fatal error: Command failed for target `liblib.a' Current working directory /lhome/lalit/dovecot/dovecot-1.0.rc7/src/lib *** Error code 1 make: Fatal error: Command failed for target `all-recursive' Current working directory /lhome/lalit/dovecot/dovecot-1.0.rc7/src *** Error code 1 make: Fatal error: Command failed for target `all-recursive' Current working directory /lhome/lalit/dovecot/dovecot-1.0.rc7 *** Error code 1 make: Fatal error: Command failed for target `all' <<make.out.zip>> <<configure.out.zip>> > Confidentiality Note: This electronic message transmission is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. If you have received this transmission, but are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of the contents of this information is strictly prohibited. If you have received this e-mail in error, please contact me at 212-615-4204 and delete and destroy the original message and all copies. Thank You. > >

2 1

[Dovecot] sieve problem unresolved
by Amadou Toure 25 Sep '06

25 Sep '06

hello, I follow your suggestions : _cyrus timsieved installed on the two LDA server _the sieve script stored in the /var/home (which is the virtual home directory) and in /var/mail/user/ for testing purposes But nothing happened when the user receive a email. Below the sieve script. Regards #################################################### # This script has been automatically generated by avelsieve # (Sieve Mail Filters Plugin for Squirrelmail) #AVELSIEVE_VERSIONYTo0OntzOjU6Im1ham9yIjtpOjE7czo1OiJtaW5vciI7aTowO3M6NzoicmVsZWFzZSI7aToxO3M6Njoic3RyaW5nIjtzOjU6IjEuMC4xIjt9 #AVELSIEVE_CREATED1157627930 #AVELSIEVE_MODIFIED1157628524 require ["fileinto","reject","vacation","imapflags","relational","comparator-i;ascii-numeric","regex","notify","redirect"]; if header :contains "subject" ["order", "test"] { keep; redirect "amadou.toure(a)sentoo.sn"; } vacation # Reply at most once a day to a same sender :days 0 :subject "Out of office reply" # List of allowed recipient addresses from auto reply should be sent. :addresses ["ctsarr(a)sentoo.sn"] "I'm out of office, please contact Amadou TOURE instead. Best regards CHEIKH SARR"; #################################################### Amadou TOURE Sonatel Multimedia, 136 Sacre Coeur, Pyrotechnie, BP 21100 Dakar Tel +221-8699810. Fax +221-8641094 http://www.sentoo.sn DAKAR - SENEGAL ----- Original Message ----- From: "John Peacock" <jpeacock(a)rowman.com> To: "Amadou Toure" <atoure(a)sentoo.sn> Cc: <dovecot(a)dovecot.org> Sent: Monday, September 11, 2006 2:44 PM Subject: Re: [Dovecot] sieve unresolved problem > Amadou Toure wrote: >> What about the directory sieve script storage ? >> We use avelsieve on the squirrel mail web interface to edit and create >> script and the script are stored on the /var/home/first letter/username/ >> (shared across the NFS) but it seems that at the delivery process the >> LDA doesn't execute the script > > You can't just place the sieve script in some random location and expect > dovecot to magically find it. Right now, the only place that deliver > expects to find the script (and it *must* be named .dovecot.sieve) is in > the [virtual] user's home directory. After 1.0 is golden, I would expect > that Timo might have some time to make that configurable, but I wouldn't > want to hold up dovecot trying to get that working now. > > John > > -- > John Peacock > Director of Information Research and Technology > Rowman & Littlefield Publishing Group > 4501 Forbes Boulevard > Suite H > Lanham, MD 20706 > 301-459-3366 x.5010 > fax 301-429-5748 Amadou TOURE Sonatel Multimedia, 136 Sacre Coeur, Pyrotechnie, BP 21100 Dakar Tel +221-8699810. Fax +221-8641094 http://www.sentoo.sn DAKAR - SENEGAL

2 2

Re: [Dovecot] Dovecot - postfix SASL
by Matt 25 Sep '06

25 Sep '06

Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: connection established Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: master_notify: status 0 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: name_mask: resource Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: name_mask: software Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: xsasl_dovecot_server_create: SASL service=smtp, realm=(null) Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: connect from c-67-183-127-210.hsd1.wa.comcast.net[67.183.127.210] Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_list_match: c-67-183-127-210.hsd1.wa.comcast.net: no match Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_list_match: 67.183.127.210: no match Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_list_match: c-67-183-127-210.hsd1.wa.comcast.net: no match Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_list_match: 67.183.127.210: no match Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_hostname: c-67-183-127-210.hsd1.wa.comcast.net ~? 127.0.0.0/8 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_hostaddr: 67.183.127.210 ~? 127.0.0.0/8 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_hostname: c-67-183-127-210.hsd1.wa.comcast.net ~? 205.252.250.12 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_hostaddr: 67.183.127.210 ~? 205.252.250.12 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_list_match: c-67-183-127-210.hsd1.wa.comcast.net: no match Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_list_match: 67.183.127.210: no match Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: send attr request = connect Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: send attr ident = smtp:67.183.127.210 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: private/anvil: wanted attribute: status Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: input attribute name: status Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: input attribute value: 0 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: private/anvil: wanted attribute: count Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: input attribute name: count Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: input attribute value: 1 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: private/anvil: wanted attribute: rate Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: input attribute name: rate Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: input attribute value: 3 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: private/anvil: wanted attribute: (list terminator) Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: input attribute name: (end) Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: > c-67-183-127-210.hsd1.wa.comcast.net[67.183.127.210]: 220 hostyougood.com ESMTP Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: < c-67-183-127-210.hsd1.wa.comcast.net[67.183.127.210]: HELO office Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: > c-67-183-127-210.hsd1.wa.comcast.net[67.183.127.210]: 250 hostyougood.com Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: < c-67-183-127-210.hsd1.wa.comcast.net[67.183.127.210]: MAIL FROM: <admin(a)hostyougood.com> Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: extract_addr: input: <admin(a)hostyougood.com> Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: smtpd_check_addr: addr=admin(a)hostyougood.com Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: ctable_locate: move existing entry key admin(a)hostyougood.com Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: extract_addr: in: <admin(a)hostyougood.com>, result: admin(a)hostyougood.com Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: fsspace: .: block size 4096, blocks free 2152496 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: smtpd_check_queue: blocks 4096 avail 2152496 min_free 0 msg_size_limit 10240000 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: > c-67-183-127-210.hsd1.wa.comcast.net[67.183.127.210]: 250 2.1.0 Ok Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: < c-67-183-127-210.hsd1.wa.comcast.net[67.183.127.210]: RCPT TO: <elitescripts2000(a)yahoo.com> Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: extract_addr: input: <elitescripts2000(a)yahoo.com> Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: smtpd_check_addr: addr=elitescripts2000(a)yahoo.com Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: ctable_locate: move existing entry key elitescripts2000(a)yahoo.com Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: extract_addr: in: <elitescripts2000(a)yahoo.com>, result: elitescripts2000(a)yahoo.com Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: >>> START Recipient address RESTRICTIONS <<< Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: generic_checks: name=permit_mynetworks Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: permit_mynetworks: c-67-183-127-210.hsd1.wa.comcast.net 67.183.127.210 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_hostname: c-67-183-127-210.hsd1.wa.comcast.net ~? 127.0.0.0/8 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_hostaddr: 67.183.127.210 ~? 127.0.0.0/8 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_hostname: c-67-183-127-210.hsd1.wa.comcast.net ~? 205.252.250.12 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_hostaddr: 67.183.127.210 ~? 205.252.250.12 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_list_match: c-67-183-127-210.hsd1.wa.comcast.net: no match Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_list_match: 67.183.127.210: no match Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: generic_checks: name=permit_mynetworks status=0 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: generic_checks: name=permit_sasl_authenticated Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: generic_checks: name=permit_sasl_authenticated status=0 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: generic_checks: name=reject_unauth_destination Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: reject_unauth_destination: elitescripts2000(a)yahoo.com Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: permit_auth_destination: elitescripts2000(a)yahoo.com Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: ctable_locate: leave existing entry key elitescripts2000(a)yahoo.com Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: NOQUEUE: reject: RCPT from c-67-183-127-210.hsd1.wa.comcast.net[67.183.127.210]: 554 5.7.1 <elitescripts2000(a)yahoo.com>: Relay access denied; from=<admin(a)hostyougood.com> to=<elitescripts2000(a)yahoo.com> proto=SMTP helo=<office> Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: generic_checks: name=reject_unauth_destination status=2 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: > c-67-183-127-210.hsd1.wa.comcast.net[67.183.127.210]: 554 5.7.1 <elitescripts2000(a)yahoo.com>: Relay access denied Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: < c-67-183-127-210.hsd1.wa.comcast.net[67.183.127.210]: QUIT Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: > c-67-183-127-210.hsd1.wa.comcast.net[67.183.127.210]: 221 2.0.0 Bye Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_hostname: c-67-183-127-210.hsd1.wa.comcast.net ~? 127.0.0.0/8 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_hostaddr: 67.183.127.210 ~? 127.0.0.0/8 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_hostname: c-67-183-127-210.hsd1.wa.comcast.net ~? 205.252.250.12 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_hostaddr: 67.183.127.210 ~? 205.252.250.12 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_list_match: c-67-183-127-210.hsd1.wa.comcast.net: no match Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: match_list_match: 67.183.127.210: no match Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: send attr request = disconnect Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: send attr ident = smtp:67.183.127.210 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: private/anvil: wanted attribute: status Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: input attribute name: status Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: input attribute value: 0 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: private/anvil: wanted attribute: (list terminator) Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: input attribute name: (end) Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: disconnect from c-67-183-127-210.hsd1.wa.comcast.net[67.183.127.210] Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: master_notify: status 1 Sep 25 04:53:30 hostyougood postfix/smtpd[17497]: connection closed --- Matt <elitescripts2000(a)yahoo.com> wrote: > Hi, > > I am trying to replace pop-before-smtp ( yes it is crap ) with Dovecot SASL. > > I have everything configured according to: > http://www.postfix.org/SASL_README.html > > But, does not allow me to SEND mail via POP3 using outlook express... > > Below are my config files. > > Postfix version 2.3.3 > Dovecot version 1.0.rc7 > > dovecot.conf > ------------ > auth default { > mechanisms = plain login > > passdb sql { > args = > /home/digipanel/secure/programs/dovecot/config/dovecot-mysql.conf > } > userdb sql { > args = > /home/digipanel/secure/programs/dovecot/config/dovecot-mysql.conf > } > socket listen { > client { > path = /home/digipanel/secure/programs/postfix/queue/private/auth > mode = 0666 > user = postfix > group = postfix > } > } > } > > main.cf > ------- > smtpd_recipient_restrictions = > permit_mynetworks, > permit_sasl_authenticated, > reject_unauth_destination > > smtpd_sasl_auth_enable = yes > broken_sasl_auth_clients = yes > smtpd_sasl_type = dovecot > smtpd_sasl_path = private/auth > smtpd_sasl_authenticated_header = yes > > Now my postconf -a yields: dovecot > > So, I know postfix has compiled in Dovecot support. > > My mail logs say I am not allowd to relay off the mailserver. >

5 5

[Dovecot] Dovecot 1.0.rc7 ioloop-poll.c assertion failed after SIGHUP
by Chris Wakelin 25 Sep '06

25 Sep '06

Anybody else seen this one? We're running Dovecot 1.0.rc7 on a different port on our live server (we're generally live with 1.0.beta5) and after a HUP to reload the user database (in a passwd-file) this morning we got:- > dovecot: Sep 22 07:45:05 Info: IMAP 14482 someuser xxx.xxx.xxx.xxx : Disconnected in IDLE > dovecot: Sep 22 07:45:05 Warning: imap-login: SSL_read() syscall failed: No route to host [xxx.xxx.xxx.xxx] > dovecot: Sep 22 07:45:05 Warning: SIGHUP received - reloading configuration > dovecot: Sep 22 07:45:05 Error: Login process died too early - shutting down > dovecot: Sep 22 07:45:05 Panic: file ioloop-poll.c: line 105 (io_loop_handle_remove): assertion failed: (index >= 0 && (unsigned int) index < ctx->fds_count) and Dovecot had died. "someuser" was me, and I'd left my Thunderbird client logged in (via IMAPS) by mistake when I hibernated my PC last night. I'd seen exactly the same assert on a test box the day before yesterday, (this time without a machine hibernating):- > dovecot: Sep 19 19:00:45 Info: imap-login: Aborted login: user=<testuser>, method=PLAIN, rip=yyy.yyy.yyy.yyy, lip=yyy.yyy.yyy.yyy, secured > dovecot: Sep 19 19:07:42 Warning: SIGHUP received - reloading configuration > dovecot: Sep 19 19:07:42 Error: Login process died too early - shutting down > dovecot: Sep 19 19:07:42 Panic: file ioloop-poll.c: line 105 (io_loop_handle_remove): assertion failed: (index >= 0 && (unsigned int) index < ctx->fds_count) Where yyy.yyy.yyy.yyy is actually the test box (I was logging in from the server itself using "openssl s_client"). The thing is, I was hoping to upgrade everyone (~20,000 users) to 1.0.rc7 next Tuesday, but now I'm not so sure! Chris -- --+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+- Christopher Wakelin, c.d.wakelin(a)reading.ac.uk IT Services Centre, The University of Reading, Tel: +44 (0)118 378 8439 Whiteknights, Reading, RG6 2AF, UK Fax: +44 (0)118 975 3094

2 6

[Dovecot] Need to detect event: a user move a message to a “spam folder” (for antispam filter)
by Naefen Raphaël 25 Sep '06

25 Sep '06

I’m writing an immune system based antispam filter. I need to detect when a user move a message to her spam folder (to inform the filter). I I found “cmd_copy” in imap library so I detect the copy event. But at this level I wasn’t able to find info about which mail and which user copy this message. My question is: Were I can find user Info to know how is moving this message in the spam folder. Ideally if I can have information about message (content or id) will be perfect. Thanks

3 2

[Dovecot] RC7: BUG! and patch [Was: Re: rc7 bug? [Was: deliver LDA and INBOX location] (fwd)] (fwd)
by David Lee 25 Sep '06

25 Sep '06

Could someone confirm, please, that this bug report and its proposed fix are being checked? 1. Is my analysis (message below) about right? 2. Is my proposed patch (attached) about right? 3. Is this being addressed for "rc8" (or whatever) and its successors? Many thanks. -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : Durham University : : http://www.dur.ac.uk/t.d.lee/ South Road : : Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. : ---------- Forwarded message ---------- Date: Tue, 5 Sep 2006 16:40:00 +0100 (BST) From: David Lee <t.d.lee(a)durham.ac.uk> To: dovecot(a)dovecot.org Subject: [Dovecot] RC7: BUG! and patch [Was: Re: rc7 bug? [Was: deliver LDA and INBOX location] (fwd)] On Tue, 5 Sep 2006, David Lee wrote: > Anyone had any thoughts on the item below? [see earlier in thread] > > If the problem is with my config, I'd like to be guided towards how I > might resolve it. > > If it is a bug in rc7, it would be good to fix it, and I'd be happy to > beta-test. BUG in rc7 (and probably from much earlier). The LDA 'deliver' fails to honour any uid (%i) setting in dovecot.conf. So delivery and reading happen in different places if 'default_mail_env' uses a '%i' variant. Clearly incorrect behaviour. Attached is a draft of a patch which fixes the problem. Please could the patch be reviewed and, in some form, applied? Thanks. -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : Durham University : : http://www.dur.ac.uk/t.d.lee/ South Road : : Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. :

3 3

[Dovecot] Virtual Folders
by James Turnbull 25 Sep '06

25 Sep '06

Hi Just wondering if Virtual Folder functionality was on the roadmap for Dovecot? Thanks James Turnbull -- James Turnbull <james(a)lovedthanlost.net> --- Author of Pro Nagios 2.0 (http://www.amazon.com/gp/product/1590596099/) Hardening Linux (http://www.amazon.com/gp/product/1590594444/) --- PGP Key (http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x0C42DF40)

3 4

[Dovecot] Upgrading
by Chris Kenward 25 Sep '06

25 Sep '06

Hi Folks OK - I'm ready to upgrade my version .99.11 to the latest release candidate but I haven't a clue how to do that on a live mail server without potential disruption. Can anyone help with advice on the best way to do this? CentOS latest release Running Sendmail/Procmail/Dovecot Thanks Chris

3 2

[Dovecot] Allow login via aliases
by Beber 23 Sep '06

23 Sep '06

Hello, I've created aliases for users on my mail server, and I would like that users can login via any of there aliases. Is it possible ? Thanks -- Beber - E-Mail / Jabber (+GMail) : beber_AT_meleeweb.net http://www.meleeweb.net

2 1

[Dovecot] PAM authentication problem: MD5 vs crypt
by bhayden＠umn.edu 23 Sep '06

23 Sep '06

Here's a strange one. I have Dovecot set up on Solaris 9. The auth portion of the config is straight out of the box. Using PAM. We have most users in a dbm file which is just a series of key/value pairs: key is a username, and value is a string equivalent to a shadow entry. nsswitch.conf entry: passwd files dbm. For historical reasons, some users have a classic 13-character Unix crypt password hash, while others have a 34-character MD5 hash. Here's the situation: User location pw Hash Auth succeeds/fails ---------------------------------------------- files crypt succeeds dbm crypt succeeds files MD5 succeeds dbm MD5 FAILS After two days of research, trussing, and etc, I am stumped. Does anyone have a thought? -Brian

2 2

[Dovecot] Wow! Welcome back Timo!
by Charles Marcus 23 Sep '06

23 Sep '06

You were missed... hope all went well with - whatever you were doing... :)

5 8

[Dovecot] Missing Mailbox
by Nick 23 Sep '06

23 Sep '06

Hi List, I'm setting up a new Dovecot server and am having some issues getting Dovecot to see the mailbox correctly. I already have several mailboxes (From another Dovecot server) but my new install does not see them. I'm running Ubuntu 6.06 w/ Dovecot 1.0.beta3. When I try to login, I get the following in the log. Sep 23 15:11:55 nibiru dovecot: auth(default): client out: CONT^I1^I Sep 23 15:11:55 nibiru dovecot: auth-worker(default): sql(nick(a)mogmail.net, 192.168.0.129): query: SELECT password FROM users WHERE email = ' nick(a)mogmail.net' Sep 23 15:11:55 nibiru dovecot: auth(default): client in: CONT<hidden> Sep 23 15:11:55 nibiru dovecot: auth(default): client out: OK^I1^Iuser= nick(a)mogmail.net Sep 23 15:11:55 nibiru dovecot: auth-worker(default): sql(nick(a)mogmail.net, 192.168.0.129): SELECT CONCAT('/srv/mail/','mogmail.net','/nick') AS home, '5000' AS uid, '5000' AS gid FROM users u, domains d WHERE u.email='nick(a)mogmail.net' AND d.domain='mogmail.net' Sep 23 15:11:55 nibiru dovecot: auth(default): master in: REQUEST^I2^I7117^I1 Sep 23 15:11:55 nibiru dovecot: auth(default): master out: USER^I2^Inick(a)mogmail.net ^Ihome=/srv/mail/mogmail.net/nick^Iuid=5000^Igid=5000 Sep 23 15:11:55 nibiru dovecot: imap-login: Login: user=<nick(a)mogmail.net>, method=plain, rip=192.168.0.129, lip=192.168.0.2 I'm concerned about the "^I" appearing all over the place. My config is below. Does anyone know what's happening? Thanks, Nick # cat dovecot.conf protocols = imap disable_plaintext_auth = no auth_verbose = yes auth_debug = yes auth default { mechanisms = plain userdb sql { args = /etc/dovecot/dovecot-sql.conf } passdb sql { args = /etc/dovecot/dovecot-sql.conf } } # cat dovecot-sql.conf driver = mysql connect = host=localhost dbname=maildb user=postfix password=secret default_pass_scheme = CRYPT password_query = SELECT password FROM users WHERE email = '%u' user_query = SELECT CONCAT('/srv/mail/','%d','/%n') AS home, '5000' AS uid, '5000' AS gid FROM users u, domains d WHERE u.email='%u' AND d.domain='%d'

1 0

[Dovecot] Newsgroup
by Jos Chrispijn 23 Sep '06

23 Sep '06

3 3

[Dovecot] Restrictions on User Basis
by Robinson Ortiz 23 Sep '06

23 Sep '06

hi, man I can't make my wan users send mail to my office I have sendmail dovecot in lan function so good I have squirremail and it function well from everywhere but wan users can send messages to my office say - server response 553-

2 1

Re: [Dovecot] SSL_accept failed
by Timothy Martin 23 Sep '06

23 Sep '06

On Sep 15, 2006, at 9:11am, Morgan Nightbear wrote: > > It's one of a few that I use. And I've built dovecot using openssl > 0.9.8. > OpenSSL 0.9.7c-p1 > > >> I don't even get to this point. I don't get the cert warning >> dialog with my dovecot server (i do for courier) -- the activity >> window just shows it trying to synchronize for a very long time >> with no success. >> > > What message do you have in the log file related to your attempted > connection? > dovecot: Sep 14 23:18:05 Warning: imap-login: SSL_accept() syscall failed: EOF [<client-ip>] dovecot: Sep 14 23:21:05 Info: imap-login: Disconnected: Inactivity: rip=<client-ip>, lip=<server-ip>, TLS handshake > Did you get a certificate warning when trying to connect to my server? > > With Apple Mail? I just tried, and yes. The standard warning i normally get with other servers. But this doesn't happen for my own server... .tim

1 1

[Dovecot] most of INBOX missing?
by William Lott 22 Sep '06

22 Sep '06

Greetings. I'm having an issue with dovecot that I'm hoping that someone can help me with. Most of the mail in my INBOX has mysteriously disappeared and I'd like to get it back. It's all in the ~/Maildir/cur directory and dovecot reports that 1048 messages exist when given the SELECT imap command. But Thunderbird and the SEARCH imap command only list 25 messages: [wlott@rootbeer ~]$ ls Maildir/cur | wc -l 1048 [wlott@rootbeer ~]$ MAIL=maildir:~/Maildir /usr/libexec/dovecot/imap * PREAUTH [CAPABILITY IMAP4rev1 SORT THREAD=REFERENCES MULTIAPPEND UNSELECT IDLE CHILDREN LISTEXT LIST-SUBSCRIBED NAMESPACE] Logged in as wlott x SELECT INBOX * FLAGS (\Answered \Flagged \Deleted \Seen \Draft NonJunk $MDNSent $Label1 $Forwarded Junk) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft NonJunk $MDNSent $Label1 $Forwarded Junk \*)] Flags permitted. * 1048 EXISTS * 0 RECENT * OK [UIDVALIDITY 1117080198] UIDs valid * OK [UIDNEXT 1700] Predicted next UID x OK [READ-WRITE] Select completed. x SEARCH ALL * SEARCH 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 x OK Search completed. [wlott@rootbeer ~]$ I'm running dovecot version 0.99.14-8 under Fedora Core 4. I saw on the dovecot website that 0.99 isn't supported anymore, but I'm hoping that someone can help me recover my lost email none the less. Thanks, -William

3 4

[Dovecot] Rotating Dovecot's logfile
by Odhiambo WASHINGTON 22 Sep '06

22 Sep '06

Any *BSD user on this list already having a means of rotating the dovecot logfile? What signal number do I need to send to the daemon to reopen its logfile? -Wash http://www.netmeister.org/news/learn2quote.html DISCLAIMER: See http://www.wananchi.com/bms/terms.php -- +======================================================================+ |\ _,,,---,,_ | Odhiambo Washington <wash(a)wananchi.com> Zzz /,`.-'`' -. ;-;;,_ | Wananchi Online Ltd. www.wananchi.com |,4- ) )-,_. ,\ ( `'-'| Tel: +254 20 313985-9 +254 20 313922 '---''(_/--' `-'\_) | GSM: +254 722 743223 +254 733 744121 +======================================================================+ Be a better psychiatrist and the world will beat a psychopath to your door.

4 5

[Dovecot] Limiting number of IMAP connections per user
by Simon L Jackson 22 Sep '06

22 Sep '06

Hi, Is there a way of limiting the number of IMAP connections (i.e. processes) per user? Despite asking users to set their email client settings to limit themselves to 2 connections, some still have this set to 10 or more. Cheers -- Simon L Jackson Carringbush.Net +- Carringbush.Net Hosting * Development * Advice Web: www.carringbush.net <http://www.carringbush.net/> Email: simon.jackson(a)carringbush.net <mailto:simon.jackson@carringbush.net> Office: +61 3 9411 4400 Support: +61 3 9411 4444 Fax: +61 3 9411 4499 Level 1 15 Bedford Street Collingwood VIC 3066 Australia P.O. Box 1464 Collingwood VIC 3066 Australia +-

2 1

[Dovecot] dovecot dreate directory instead mailbox
by Roberto Tagliaferri 22 Sep '06

22 Sep '06

Hi, i've dovecot 1.0b7 with postfix (pop3, real user) and i see a strange thing: if i create a new user and i log in in pop3, dovecot create a directory (and then postfix reject the email with an error); i must send an email and THEN log in pop server... -- Roberto Tagliaferri Responsabile Progettazione & Produzione TosNet s.r.l. - Internet Service Provider r.tagliaferri(a)tosnet.it www.tosnet.it

3 4

[Dovecot] Incorrect GSSAPI Service Name for POP3
by Tim Steiner 22 Sep '06

22 Sep '06

In pop3-login/client-authenticate.c, when sasl_server_auth_begin() is called, it does so with the service name of "POP3". GSSAPI uses this service name when obtaining its service credentials. The problem is that according to http://www.iana.org/assignments/gssapi-service-names , the service name should instead be simply "pop". This causes GSSAPI authentication to fail when used with a POP3 account. I have created a small patch that corrects this problem for GSSAPI only, as I do not know if other mechanisms are affected by this. --Tim Steiner ----------------------------START PATCH---------------------------- diff -ruN dovecot-1.0.beta8/src/auth/mech-gssapi.c dovecot-1.0.beta8.new/src/auth/mech-gssapi.c --- dovecot-1.0.beta8/src/auth/mech-gssapi.c 2006-09-18 17:35:02.000000000 -0500 +++ dovecot-1.0.beta8.new/src/auth/mech-gssapi.c 2006-09-18 17:37:46.000000000 -0500 @@ -101,7 +101,11 @@ gss_name_t gss_principal; principal_name = t_str_new(128); - str_append(principal_name, t_str_lcase(request->service)); + if(strcmp(request->service, "POP3") == 0) { + str_append(principal_name, "pop"); + } else { + str_append(principal_name, t_str_lcase(request->service)); + } str_append_c(principal_name, '@'); str_append(principal_name, my_hostname); -----------------------------END PATCH-----------------------------

2 1

[Dovecot] Default subscriptions
by Vegard Svanberg 22 Sep '06

22 Sep '06

Is it possible to force a subscription to an IMAP folder? So that a user by default is subscribed to folder <foo> and cannot unsubscribe. -- Vegard Svanberg <vegard(a)svanberg.no> [*Takapa@IRC (EFnet)]

4 5

Re: [Dovecot] Big sites using Dovecot
by Bill Boebel 22 Sep '06

22 Sep '06

On Fri, September 22, 2006 5:05 am, Robin Elfrink <robin(a)15augustus.nl> said: > -How many mailboxes do you run on one backend? The limit on the backend is disk. We're comfortable at about 10,000 mailboxes per 7200 RPM SATA drive. The more disks you put on each backend server, the more mailboxes each server can handle. > -Do you have any anti-spam/virus running on them or is that done earlier? Yes. Currently 17 servers doing just filtering. These run Postfix, SpamAssassin, Policyd, ClamAV. > -Have you ever used perdition and if so, how does dovecot as a proxy > compare to that? Yes. Perdition requires a process per connection though, so it does not scale well. With Dovecot's proxy (and also the nginx proxy, http://sysoev.ru/en/) individual processes can handle multiple connections, and takes advantage of epoll for network events which is ideal for handling large numbers of idle IMAP connections. With Perdition we'd run at 2000 connections per server, with Dovecot we haven't it a peak yet, but expect to peak at around 15,000 - 25,000 connections per proxy server. Obviously the bigger the box, the more connections it can handle. > -Do you mind me asking these questions? Nope. Ask away. If I can't answer it I'll tell you. Bill

1 0

[Dovecot] Running just part of dovecot
by Marshal Newrock 22 Sep '06

22 Sep '06

I'm currently setting up a large mail system, with different services split out onto different machines. What I want is this: machine1: dovecot smtp auth, no pop/imap machine2: dovecot lda, no pop/imap machine3: pop/imap, nothing else machine3 is obviously not the issue. Is there a way to run machine1 and machine2 with just their respective services, but no pop/imap? -- Marshal Newrock Ideal Solution, LLC - http://www.idealso.com

5 9

Re: [Dovecot] How to check Release/Version of Currently installed Dovecot
by Bill Boebel 22 Sep '06

22 Sep '06

On Fri, September 22, 2006 9:29 am, "Agarwal, Lalit" <LAgarwal(a)ghi.com> said: > We have dovecot installed on a Solaris 9 server, is there any way to check what > release/version is installed. /usr/sbin/dovecot --version Bill

1 0

[Dovecot] How to check Release/Version of Currently installed Dovecot
by Agarwal, Lalit 22 Sep '06

22 Sep '06

Hi, We have dovecot installed on a Solaris 9 server, is there any way to check what release/version is installed. Thanks, Lalit > Confidentiality Note: This electronic message transmission is intended only for the person or entity to which it is addressed and may contain information that is privileged, confidential or otherwise protected from disclosure. If you have received this transmission, but are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or use of the contents of this information is strictly prohibited. If you have received this e-mail in error, please contact me at 212-615-4204 and delete and destroy the original message and all copies. Thank You. > >

2 1

[Dovecot] ldap quota limitation problem
by razor 22 Sep '06

22 Sep '06

hi there i have a such problem: in dovecot.conf ... protocol imap { listen = *:143 ssl_listen = *:993 mail_plugins = quota imap_quota } ... quota = dirsize:storage=10240 ... in dovecot-ldap.conf: ... user_attrs = uid,,,uid,uidNumber,gidNumber,boxQuota=quota=dirsize:storage ... when an user try to answer out from overquoted box he got the message "overquota blahblahblah", BUT the message still goes... it seems that the imap_quota worked (report about the overquota) but plugin quota dont work. in dovecot logs : ... Sep 14 09:10:23 xxxxxxxxxxx dovecot: IMAP(test4): dirsize quota limit = 1000kB ... but in user maildir/maildirsize: 0S,0C 1179466 16 1248 1 what it can be? -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

3 2

[Dovecot] DSpam plugin
by Michael Blinn 22 Sep '06

22 Sep '06

I'm trying to set up Johannes's DSpam plugin for dovecot. I've compiled rc2 and the plugin, and have things installed OK. I have a X-DSPAM-Signature in my message that is delivered to Inbox. Whenever I try to move this to my spam folder (I changed source to say 'Spam' instead of 'SPAM'), my client (Thunderbird) pops up 'The current command did not succeed. The mail server responded: dspam failed.' I've set '#define DEBUG 1' in the plugin and see this in my 'messages' log. Sep 20 09:39:03 ltsp imap: /usr/local/bin/dspam --source=error --stdout --class=spam --signature=45113fe931161804284693 '/usr/local/bin/dspam' is the location of my dspam binary. Occasionally, though not every time I move a message, I see this in my 'messages' log. Sep 20 09:38:34 ltsp kernel: imap[3656]: segfault at 0000000000102490 rip 00002aaaaaafc589 rsp 00007fffabda5400 error 4 Sep 20 09:38:34 ltsp kernel: imap[3653]: segfault at 0000000000102490 rip 00002aaaaaafc589 rsp 00007fff31e814e0 error 4" I also see this, though the login is successful: Sep 20 09:43:44 ltsp dovecot-auth: pam_ldap: could not open secret file /etc/ldap.secret (No such file or directory) Can anyone point me in a direction? Thank you, Michael Blinn -- If this is my day of harvest, in what fields have I sowed the seed, and in what unremembered seasons? - Kahlil Gibran CONFIDENTIALITY NOTICE: This message, and any attachments that may accompany it, contain information that is intended for the use of the individual or entity to which it is addressed and may contain information that is privileged, confidential, or otherwise exempt from disclosure under applicable law. If the recipient of this message is not the intended recipient, any disclosure, copying, or other use of this communication or any of the information, which it contains is unauthorized and prohibited. If you have received this message in error, please notify the original sender by return mail and delete this message, along with any attachments, from your computer. Thank you.

4 7

[Dovecot] imposible authenticate dovecot, but authtest and testsaslauthd can
by newzen newzen 21 Sep '06

21 Sep '06

Hi all, Im new and have a problem, With authtest, i have Authentication [root@dc9f8f585 ~]# authtest esimon(a)example.tld Authentication succeeded. Authenticated: esimon(a)example.tld (uid 501, gid 501) Home Directory: /home/vmail/domains/ Maildir: (none) Quota: (none) Encrypted Password: (none) Cleartext Password: (none) Options: (none) With testsaslauthd, i have Authentication [root@dc9f8f585 ~]# testsaslauthd -u esimon(a)example.tld -p edu+123* 0: OK "Success." But wen try with dovecot, the logs say Sep 21 13:51:31 dc9f8f585 dovecot-auth: ldap(esimon(a)example.tld): No password in reply Sep 21 13:51:31 dc9f8f585 imap-login: Aborted login [::ffff:127.0.0.1] Sep 21 13:51:31 dc9f8f585 dovecot-auth: Login process 7 disconnected Sep 21 13:51:31 dc9f8f585 dovecot-auth: Login process 7 connected Sep 21 13:51:31 dc9f8f585 dovecot-auth: Login process 7 sent handshake: PID 3379 Why dovecot need the Password? there is some way for only authenticate? i using, [root@dc9f8f585 ~]# rpm -qa dovecot dovecot-0.99.11-2.EL4.1 And the authentication is against Active Directory Thanks for any help. NewZen.

1 0

[Dovecot] Deliver-Problem
by Michael Schröder 21 Sep '06

21 Sep '06

Hi, I installed a Emailserver based on Debian Sarge, exim (4.50-8sarge2) and dovecot (1.0.rc2-1bpo1). Delivering Mails with Exim to my Maildir works fine. Because I want to filter my messages with Sieve, I tried to deliver mails with deliver, but get the following error message (example with a testmail and user "Debian-exim", not delivered via Exim): --8<-- dovecot: 2006-09-19 13:17:23 Error: auth(default): deliver(username(a)domain.tld): "2006-09-19 13:17:23 "Fatal: setgid(1003) failed: Operation not permitted --8<-- Here's the relevant part of my configuration file: --8<-- auth default { mechanisms = plain login passdb sql { args = /etc/dovecot/dovecot-sql.conf } userdb sql { args = /etc/dovecot/dovecot-sql.conf } socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = virtual group = virtual } } } --8<-- User "Debian-exim" is in the same group as user "virtual". Both have r/w-permissions on /var/run/dovecot/auth-master: 0 srw-rw---- 1 virtual virtual 0 2006-09-18 13:58 /var/run/dovecot/auth-master Is there anybody who had the same problems and can help me? Best regards, Michael. PS: Sorry for my horrible english.

3 2

[Dovecot] sieve unresolved problem
by Amadou Toure 21 Sep '06

21 Sep '06

hello, I have submitted a few weeks ago problem on sieve implementantion but there not useful solution for me at this time. I think that it depend on my mail architecture : _One NFS server _two dovecot POP/IMAP server (for pop and webmail access) : the POP/IMAP don't run dovecot LDA _two delivery serveur with exim and dovecot LDA : they communicate with external relay servers and deliver mail in box. The mailbox format is maildir and the dovecot version is 1.0 rc2 Question : On which server and how to implement sieve for dovecot. Regards Amadou TOURE

2 4

[Dovecot] dovecot quota proxy mysql question
by Robert Schetterer 21 Sep '06

21 Sep '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi @ll is there sombody who has experience with http://wiki.dovecot.org/Quota/Dict which is a quota check trough mysql i do not unstand the syntax here plugin { quota = dict:storage=10240:messages=1000 proxy::quotadict } why i have to build in storage=10240:messages=1000 in , if i only want to have the value of quota in my existing mysql i understand storage and messages as default parameters foer all users so this shouldnt be needed plugin { quota = proxy::quotadict } but this dont work as i expected an i also have problems with /etc/dovecot/dovecot-dict-quota.conf connect = host=localhost dbname=mails user=mailuser table = quota select_field = current where_field = path username_field = username i still have this quota field allready in db postfix table mailbox where username = '%u' it seems this is an old style sql query so i tried this connect = host=localhost dbname=postfix user=postfixadmin pass..... dbname = postfix table = mailbox select_field = quota username_field = '%u' but this does not work ( which i am not wondering about *g ) and finally is thera a compliant to to the quotawarn feature with maildrop in dovecot? - -- Mit freundlichen Gruessen Best Regards Robert Schetterer robert_at_schetterer_dot_org Munich / Bavaria / Germany https://www.schetterer.org https://www.schetterer.com/public-gpg-robert-schetterer.key -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (MingW32) iD8DBQFFEqvDNxddAhXBw7QRAijsAKCYcLAa1KNT4LylfznencPauKn4FACeP93S aYgiwwni4FUIdcaKAuSrBW0= =y0Cx -----END PGP SIGNATURE----- -- Diese Nachricht wurde auf Viren und andere gefährliche Inhalte untersucht und ist - aktuelle Virenscanner vorausgesetzt - sauber.

1 0

[Dovecot] Problems restoring from dump
by Paul Lathrop 21 Sep '06

21 Sep '06

Hello all, First, the vital stats: FreeBSD 6.1-STABLE, dovecot 1.0.rc7 from ports. I have run into a vexing little problem that has brought my deployment of a shiny new dovecot server to a screeching halt. Using 'periodic' I've configured regular backups to occur using 'dump'. I have a monthly level 0, a weekly level 4, and a daily level 8. These dumps take advantage of snapshots to ensure they are taking a backup of a consistent filesystem. As part of the beta testing, I decided to delete my maildir and attempt to recover from the dumps. Recovery went well, as dump/restore is a wonderful piece of software. I did a quick check at the file level to be sure my mailbox looked like it had when I took the last level 8 dump, and everything looked good. The problem came when I started up Thunderbird to take a look at my mail. When I selected a message, say one that said "knockout daily run output", I'd be reading a different message entirely, like a recent email from my boss! Most of the messages were like this - hopelessly scrambled! I tried just deleting the account in Thunderbird and connecting again, but that didn't change a thing. What happened!? Dump has faithfully restored the files, including the dovecot indexes... so why are my messages scrambled? Thanks for your help, Paul

4 5

[Dovecot] deliver vda maildir postfix problem
by Robert Schetterer 21 Sep '06

21 Sep '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi @ll, sorry i am new to dovecot so this may asked before i this in dovecot.conf protocols = pop3 imap ssl_disable = yes mail_extra_groups = mail valid_chroot_dirs = /usr/local/virtual/ default_mail_env = maildir:/usr/local/virtual/%d/%n disable_plaintext_auth = no protocol lda { postmaster_address = postmaster(a)test.de } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } auth default_with_listener { mechanisms = plain userdb sql { args = /etc/dovecot/dovecot-sql.conf } passdb sql { args = /etc/dovecot/dovecot-sql.conf } userdb prefetch { } socket listen { master { path = /var/run/dovecot/auth-master mode = 0600 user = vmail group = mail } } } plugin { quota = dirsize:/usr/local/virtual/%d/%n convert_mail = maildir:/usr/local/virtual/%d/%n } this in dovecot-sql.conf driver = mysql connect = dbname=postfix user=postfixadmin host=localhost password= default_pass_scheme = PLAIN password_query = SELECT password FROM mailbox WHERE username = '%u' user_query = SELECT maildir, 1001 AS uid, 1001 AS gid FROM mailbox WHERE username = '%u' the result for maildir is like test.de/robert/ in postfix master.cf # Dovecot LDA dovecot unix - n n - - pipe flags=DRhu user=vmail:vmail argv=/usr/lib/dovecot/deliver -d ${recipient} in main.cf dovecot_destination_recipient_limit = 1 virtual_transport = dovecot this all works nice but at the final deliver the mail cant get to the maildir with Sep 21 14:00:54 testserv deliver(robert(a)test.de): userdb(robert(a)test.de) didn't return a home directory it seems that the correct maildir path isnt reportet to deliver , cause either i need another query, or deliver must have a default path the setup works nice if i switch virtual_transport = virtual in main.cf ( cause i have the postfix vda patch ) sombody know this problem , and can help me out? dovecot version is 1.0.rc7 - -- Mit freundlichen Gruessen Best Regards Robert Schetterer robert_at_schetterer_dot_org Munich / Bavaria / Germany https://www.schetterer.org https://www.schetterer.com/public-gpg-robert-schetterer.key -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.3 (MingW32) iD8DBQFFEoFjNxddAhXBw7QRAkYyAJ0SmcNhQez7zLI2ncvfKjT6/8VGVACfSYbQ 5Y+ZM2DmjrVFnpRNvGu30Zo= =+UuD -----END PGP SIGNATURE----- -- Diese Nachricht wurde auf Viren und andere gefährliche Inhalte untersucht und ist - aktuelle Virenscanner vorausgesetzt - sauber.

2 1

[Dovecot] Corrupt mbox folders after migration from uw-imap
by Ian Mortimer 21 Sep '06

21 Sep '06

After migrating our mail server from uw-imap to dovecot at the weekend we've had a few corrupted mbox folders. I assume this is due to messages with bad Content-length headers. Is there any way of checking the Content-length of messages in mbox folders? Thanks -- Ian

8 26

[Dovecot] deliver to root account
by Luis Venegas 21 Sep '06

21 Sep '06

Hi list., With dovecot-rc7 I am getting the following error when delivering to root while queue gets bigger with failed attempts: deliver(nobody): stat(/root/Maildir) failed: Permission denied deliver(nobody): stat(/root/.dovecot.sieve) failed: Permission denied deliver(nobody): lstat(/root/Maildir/cur) failed: Permission denied What am I missing? In postfix/main.cf home_mailbox = Maildir/ mailbox_command = /usr/local/libexec/dovecot/deliver Thanks !

2 1

[Dovecot] Crash of 1.0rc7
by Bernhard Schmidt 20 Sep '06

20 Sep '06

Hi, I pasted the logs in #dovecot already, but maybe someone here has a little bit more insight. I'm running dovecot cvs branch_1_0 from Sep. 16th. Dovecot is doing LDAP userdb/passdb and I'm using deliver for local deliveries. Today my users complained about not being able to login anymore. I opened ssh to that box and found the following messages Sep 20 15:58:03 vs02 dovecot: imap-login: Login: user=<user1>, method=LOGIN, rip=::ffff:129.187.246.129, lip=::ffff:83.170.6.69 [ couple of mail deliveries using dovecot ] Sep 20 16:38:03 vs02 dovecot: IMAP(user1): Disconnected for inactivity Sep 20 16:38:03 vs02 dovecot: pop3-login: Disconnected: Inactivity: user=<user2>, method=PLAIN, rip=::ffff:82.135.86.26, lip=::ffff:83.170.6.69 Sep 20 16:38:03 vs02 dovecot: pop3-login: Disconnected: Inactivity: user=<user2>, method=PLAIN, rip=::ffff:82.135.86.26, lip=::ffff:83.170.6.69 Sep 20 16:38:03 vs02 dovecot: imap-login: Disconnected: Inactivity: user=<user3>, method=LOGIN, rip=::ffff:83.170.6.71, lip=::ffff:83.170.6.69 Sep 20 16:38:03 vs02 dovecot: imap-login: Disconnected: Inactivity: user=<user4>, method=LOGIN, rip=::ffff:83.170.6.71, lip=::ffff:83.170.6.69 Sep 20 16:38:03 vs02 dovecot: imap-login: Disconnected: Inactivity: user=<user3>, method=LOGIN, rip=::ffff:83.170.6.71, lip=::ffff:83.170.6.69 Sep 20 16:38:03 vs02 dovecot: pop3-login: Disconnected: Inactivity: user=<user5>, method=PLAIN, rip=::ffff:84.151.241.209, lip=::ffff:83.170.6.69 Sep 20 16:38:03 vs02 dovecot: imap-login: Login: user=<user1>, method=LOGIN, rip=::ffff:129.187.246.129, lip=::ffff:83.170.6.69 Sep 20 16:38:03 vs02 dovecot: auth(default): Master request 27514.1 not found Sep 20 16:38:03 vs02 dovecot: auth(default): Master request 26788.1 not found Sep 20 16:38:03 vs02 dovecot: auth(default): Master request 27198.1 not found Sep 20 16:38:03 vs02 dovecot: auth(default): Master request 27470.1 not found Sep 20 16:38:03 vs02 dovecot: auth(default): Master request 26654.1 not found Sep 20 16:38:03 vs02 dovecot: pop3-login: Master sent reply with unknown tag 1 Sep 20 16:38:03 vs02 dovecot: pop3-login: Master sent reply with unknown tag 1 Sep 20 16:38:03 vs02 dovecot: imap-login: Master sent reply with unknown tag 1 Sep 20 16:38:03 vs02 dovecot: pop3-login: Master sent reply with unknown tag 1 Sep 20 16:38:03 vs02 dovecot: child 26654 (login) returned error 89 Sep 20 16:38:03 vs02 dovecot: child 26788 (login) returned error 89 Sep 20 16:38:03 vs02 dovecot: child 27198 (login) returned error 89 Sep 20 16:38:03 vs02 dovecot: child 27470 (login) returned error 89 Sep 20 16:38:03 vs02 dovecot: child 27514 (login) returned error 89 Sep 20 16:38:03 vs02 dovecot: imap-login: Master sent reply with unknown tag 1 Sep 20 16:38:03 vs02 dovecot: auth(default): Master request 27515.1 not found Sep 20 16:38:03 vs02 dovecot: imap-login: Master sent reply with unknown tag 1 Sep 20 16:38:03 vs02 dovecot: child 27515 (login) returned error 89 Sep 20 16:38:03 vs02 dovecot: IMAP(user1): Disconnected Sep 20 16:38:04 vs02 dovecot: imap-login: Disconnected: rip=::ffff:83.170.6.71, lip=::ffff:83.170.6.69 Sep 20 16:38:04 vs02 dovecot: Login process died too early - shutting down Sep 20 16:38:04 vs02 dovecot: imap-login: Disconnected: rip=::ffff:83.170.6.71, lip=::ffff:83.170.6.69 Sep 20 16:38:04 vs02 dovecot: pop3-login: Disconnected: rip=::ffff:84.151.241.209, lip=::ffff:83.170.6.69 after that the daemon apparently quit and was restarted automatically. No errors reoccured after that. The box only has a few private users. xenU guest domain running a mix of amd64 Ubuntu dapper/edgy. This is the first problem I've seen in this setup. Regards, Bernhard

1 0

[Dovecot] Help problem compiling dovecot-1.0.rc7 on Solaris 10x86
by Harvey Hou 20 Sep '06

20 Sep '06

Hi, I hope someone can help point me in the right direction. I have a Sunfire x4100 running Solaris 10x86 06/06 with the Sun Studio 11 compiler. I am just trying to do a stock compile of dovecot-1.0.rc7 Ran the ./configure fine. See Below. Install prefix ...................... : /usr/local File offsets ........................ : 64bit I/O loop method ..................... : poll File change notification method ..... : none Building with SSL support ........... : no Building with IPv6 support .......... : yes Building with pop3 server ........... : yes Building with mail delivery agent .. : yes Building with GSSAPI support ........ : no Building with user database modules . : static prefetch passwd passwd-file checkpassword (modules) Building with password lookup modules : passwd passwd-file shadow pam checkpassword (modules) Then I typed make to compile and I receive a Segmentation fault error. See Below. /opt/SUNWspro/bin/cc -g -o imap cmd-append.o cmd-capability.o cmd-check.o cmd-close.o cmd-copy.o cmd-create.o cm d-delete.o cmd-examine.o cmd-expunge.o cmd-fetch.o cmd-idle.o cmd-list.o cmd-logout.o cmd-lsub.o cmd-namespace.o cmd-noop.o cmd-rename.o cmd-search.o cmd-select.o cmd-sort.o cmd-status.o cmd-store.o cmd-subscribe.o cmd-threa d.o cmd-uid.o cmd-unselect.o cmd-unsubscribe.o client.o commands.o commands-util.o imap-expunge.o imap-fetch.o i map-fetch-body.o imap-messageset.o imap-search.o imap-sort.o imap-sync.o imap-thread.o mail-storage-callbacks.o main.o namespace.o ../lib/mountpoint.o -L/usr/lib -L/usr/sfw/lib -L/usr/openwin/lib ../lib-storage/register/lib storage-register.a ../../src/lib-storage/index/maildir/libstorage_maildir.a ../../src/lib-storage/index/mbox/lib storage_mbox.a ../../src/lib-storage/index/dbox/libstorage_dbox.a ../../src/lib-storage/index/libstorage_index.a ../../src/lib-index/libindex.a ../lib-storage/libstorage.a ../lib-storage/subscription-file/libstorage_subscrip tion_file.a ../lib-imap/libimap.a ../lib-mail/libmail.a ../lib-dict/libdict.a ../lib-charset/libcharset.a ../lib /liblib.a -lsocket -lnsl -lrt -lsendfile -R/usr/lib -R/usr/sfw/lib -R/usr/openwin/lib make[3]: *** [imap] Segmentation Fault make[3]: *** Deleting file `imap' make[3]: Leaving directory `/home/hou/src/dovecot-1.0.rc7/src/imap' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/hou/src/dovecot-1.0.rc7/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/hou/src/dovecot-1.0.rc7' make: *** [all] Error 2 The strange thing is that when I compile dovecot-1.0.beta8 it works fine. No compile error messages. I've also tried compiling with gcc 3.4.3 and I receive the same segmentation fault. Any help would be greatly appreciated. Thanks. -- Harvey Hou Computer/Network/System Administrator UNC Highway Safety Research Center email: harvey_hou(a)unc.edu http://www.hsrc.unc.edu/ -----BEGIN PGP PUBLIC KEY BLOCK----- Version: PGPfreeware 6.5.3 for non-commercial use <http://www.pgp.com> mQCNAzMXB/YAAAEEAPkb8vDVZvfUz4WorNTzQztCqvBok7s38pQZrrILwzwe1ey5 LznGlkBhBdWzNWveKq8W1rC43JOVOVbPA9XRgHqzhN+Aa7/sX50WgoNoC6AunsKO 7jJcZIf+lyYKMPwE4OX9DSi52fnbaar7RTJaM6rLO7tXmcsox8GOWV0EYQjJAAUR tCRIYXJ2ZXkgSG91IDxob3VAY2xhaXJlLmhzcmMudW5jLmVkdT4= =VsUa -----END PGP PUBLIC KEY BLOCK-----

1 0

Re: [Dovecot] Corrupted Transaction Log caused by deliver
by Alex Pimperton 20 Sep '06

20 Sep '06

Hi All, I've just upgraded to Dovecot 1.0.rc7-1 with Postfix 2.3 on Debian Etch and it's trashing my email. I get lots of the errors below as well as other strange ones in my logs. I don't use NFS. Mail comes in via Postfix, gets passed through MailScanner, gets passed back to Postfix and then Postfix passes it to Dovecot's LDA via: mailbox_command = /usr/lib/dovecot/deliver Deliver then chokes and get's a little upset. Is there anyway to wipe out all the indexes/uidlists etc and just have Dovecot regenerate them all with a clean slate? Has anybody seen this with dovecot LDA before? Any hints about troubleshooting it? Is the best plan just to copy my imap mail out, nuke the folders and then copy the mail back in again? Regards, Alex Errors: Sep 20 08:43:41 server01 deliver(alex): Corrupted transaction log file /home/alex/mail/dovecot.index.log: Append with UID 1, but next_uid = 94 Sep 20 08:43:43 server01 deliver(alex): sieve runtime error: Fileinto: Generic Error Sep 20 08:43:43 server01 deliver(alex): Unexpected transaction log desync with index /home/alex/mail/dovecot.index

1 0

[Dovecot] Postfix - Dovecot - SASL
by Matt 19 Sep '06

19 Sep '06

I am trying to get Dovecot - Postfix - SASL to work. So, I do not have to use the pop-before-smtp goofy way of authenticating pop3 users when they want to SEND mail. dovecot.conf ------------ pop3_uidl_format = %08Xu%08Xv auth default { mechanisms = plain login passdb sql { args = /home/digipanel/secure/programs/dovecot/config/dovecot-mysql.conf } userdb sql { args = /home/digipanel/secure/programs/dovecot/config/dovecot-mysql.conf } socket listen { client { path = /home/digipanel/secure/programs/postfix/queue/private/auth mode = 0660 user = postfix group = postfix } } } postfix main.cf --------------- smtpd_recipient_restrictions = permit_mynetworks, permit_sasl_authenticated, reject_unauth_destination smtpd_sasl_auth_enable = yes broken_sasl_auth_clients = yes smtpd_sasl_type = dovecot smtpd_sasl_path = private/auth postconf -a (yields dovecot so I know it is compiled into postfix) Any ideas why it is failing? Am I missing something?

2 1

[Dovecot] FWD: Re: put procmail between postfix and dovecot
by M. Fioretti 19 Sep '06

19 Sep '06

(sorry if you received it already, I had a server crash and never received this from the list, so I thought I'd resend it) ----- Forwarded message from "M. Fioretti" <mfioretti(a)mclink.it> ----- Subject: Re: [Dovecot] put procmail between postfix and dovecot From: "M. Fioretti" <mfioretti(a)mclink.it> Date: Sat, 16 Sep 2006 13:48:49 +0200 To: dovecot(a)dovecot.org Reply-To: "M. Fioretti" <mfioretti(a)mclink.it> In-Reply-To: <Pine.LNX.4.64.0609161206220.1126(a)bbs.intern> On Sat, Sep 16, 2006 12:07:31 PM +0200, Gerhard Wiesinger (lists(a)wiesinger.com) wrote: > You can try my procmail patch posted on this list, Er... sorry, but why is a patch needed for this? I was expecting to find just some folder naming rule. Aren't both dovecot and procmail maildir compatible? Apart from this, running patched software would go against this: > >I have to do all this sorting with procmail for two reasons: > > > >- I want to have as little sw as possible on that server, and > >update it semi-automatically, if possible only from the official > >repositories and "I want" isn't really correct, I basically "have to", for reasons irrelevant here, make the maintainance of that server as automatic as possible, without installing compilers or using anything else but the local (intranet) mirrors of the official repositories. So unfortunately this patch isn't for me, not this time at least, but thanks. Ciao, Marco (still interested to know if there are solutions not involving patches) -- Marco Fioretti mfioretti, at the server mclink.it Fedora Core 3 for low memory http://www.rule-project.org/ A human being should be able to change a diaper, plan an invasion, butcher a hog, conn a ship, design a building, write a sonnet, balance accounts, build a wall, set a bone, comfort the dying, take orders, give orders, cooperate, act alone, solve equations, analyze a new problem, pitch manure, program a computer, cook a tasty meal, fight efficiently, die gallantly. Specialization is for insects. R. A. Heinlein ----- End forwarded message ----- -- Marco Fioretti mfioretti, at the server mclink.it Fedora Core 3 for low memory http://www.rule-project.org/ Human beings act intelligently only after they have exhausted the alternatives -- Abba Eban

1 0

[Dovecot] Problem with pop3 login
by Erick Perez 18 Sep '06

18 Sep '06

Hi, Im using dovecot version 0.99.11 and I'm facing a situation with one pop3 client. This is a fax application (faxmaker for windows) written by a third party that tries to login to the dovecot as USER username@domain. When the application tries to login that way, my dovecot rejects the auth. All the other pop3 clients (outlook, eudora,etc) in the system log in correctly because they do just USER username. The only failures related to the login (and I have debug enabled in dovecot) are: Sep 15 15:17:57 mail pop3-login: Aborted login [ipaddress] How ca I tell dovecot to ignore the domain part for that user? I am not using virtual support. Thanks, -- ------------------------------------------------------------ Erick Perez Panama Sistemas Integradores de Telefonia IP y Soluciones Para Centros de Datos Panama, Republica de Panama Cel Panama. +(507) 6694-4780 ------------------------------------------------------------

2 3

[Dovecot] Nuby experiences
by Victor Rini 18 Sep '06

18 Sep '06

Hello all, I am new to dovecot and have had a good experience so far. I'm using fetchmail - exim - dovecot - my email clients (mac os mail and thunderbird so far). I'm also using Ubuntu Server i.e. debian. I didn't like the inflexibility of mbox so I did a tweak to exim to deliver mail to a Maildir folder in my home directory on the server. I restarted Dovecot and it found it! Very nice but mysterious. I don't remember if I did anything to the dovecot.conf file. My clients balk at the ssl certificate that was created at install time. I see a little bit of documentation on SSL. I'll struggle with it. I'm going to look at more client setups like evolution and a webmail client. Can anyone recommend a good ajax-driven webmail client? Dovecot is good software. I'm happy I found it.

3 3

Re: [Dovecot] dovecot dreate directory instead mailbox
by Roberto Tagliaferri 18 Sep '06

18 Sep '06

Johannes Berg ha scritto: > Sorry, I can't really debug your problem. Please always post back to the > mailing list things originated from. > > johannes > > sorry :-( -- Roberto Tagliaferri Responsabile Progettazione & Produzione TosNet s.r.l. - Internet Service Provider r.tagliaferri(a)tosnet.it www.tosnet.it

1 0

[Dovecot] Dovecot using authsasld
by Dag Wieers 17 Sep '06

17 Sep '06

Hi, Trying to simplify the postfix/dovecot/saslauthd setup with less than 10 users, I was looking for some way to NOT duplicate the username/password setup. Currently I need to use a seperate file for dovecot as I do for saslauthd. (One is a simple shadow-alike file, the other the sasldb) I know that postfix 2.3 can use dovecot directly for sasl authentication, and that would be a neat solution, but we're stuck with postfix 2.2. I was wondering if anyone ever succeeded in making dovecot use saslauthd for authentication so that saslauthd becomes the authoritative source for password authentication for virtual users. (both for smtp auth as pop3/imap) My other idea to simplify was using something like pam_unix, but modified to use a seperate file (not /etc/shadow) and use pam in both dovecot and saslauthd. But I can't find something like that, pam_unix is fixed, and pam_userdb is something I'd like to avoid. Any ideas ? Thanks in advance, -- dag wieers, dag(a)wieers.com, http://dag.wieers.com/ -- [all I want is a warm bed and a kind word and unlimited power]

5 8

[Dovecot] put procmail between postfix and dovecot
by M. Fioretti 16 Sep '06

16 Sep '06

Hello, a couple of months ago, also thanks to help from this list, I set up postfix and dovecot for virtual domains on a Centos 4 remote server. I have postfix set up to deliver all email for marco(a)domain1.net to /var/mail/vhosts/marco_domain1.net/ Everything is fine, as far as postfix is concerned: all email to marco(a)domain1.net goes in that mailbox, dovecot sees it, etc... Now I need to add sorting all incoming email in subfolders: mail from SOME_LIST to marco_domain1.net/SOMELIST/ (lots of other rules for custom folders) all else to main inbox I have to do all this sorting with procmail for two reasons: - I want to have as little sw as possible on that server, and update it semi-automatically, if possible only from the official repositories: procmail has these characteristics - I want to reuse as is, with the smallest possible amount of translation, filtering, etc, the very long and complicated procmailrc files I have built over the years on several servers. My question is how do I have to modify (with a perl or similar script) the procmail rules so that they sort messages in maildir folders which: - are fully compatible with dovecot (and Squirrelmail) - (very useful, but not mandatory) can be viewed in categories and subcategories from Squirrelmail: personal/ friends/ family/ mailing_lists/ postfix/ dovecot/ .... work/ - *all* the messages, no matter how they were sorted on the server, can still be downloaded with fetchmail from home Note that I am not asking anybody to write the script for me (if you want to share a ready one, of course, I'll be glad). I just need to know what is the exact syntax/ folder naming conventions I have to follow to make all I wrote above happen. TIA, Marco -- Marco Fioretti mfioretti, at the server mclink.it Fedora Core 5 for low memory http://www.rule-project.org/ Everyone is entitled to their own opinion, but not their own facts Daniel Patrick Moynihan

4 4

[Dovecot] Locally accessing IMAP folders from Windows
by Dídac Busquets 15 Sep '06

15 Sep '06

Hi all, I've just configured Dovecot as my IMAP server in my Ubuntu machine. Everything works fine: I can access my IMAP folders remotely, I have also installed Squirrel webmail to access it thru the web... Although I'm most of the time working with Ubuntu, sometimes I boot my machine with Windows XP. However, since the server is not running then (because I'm not running Ubuntu), the only thing I can do is read the files directly. Is there any client able to display the messages directly from the files and folders stored in Maildir? Thanks, Dídac Busquets -- Didac Busquets i Font Dept. d'Electronica, Informatica i Automatica Institut d'Informatica i Aplicacions Edifici P-IV Despatx 128 Universitat de Girona Campus Montilivi 17071-Girona web: http://eia.udg.es/~busquets email: busquets(a)eia.udg.es Tel. (+34) 972.41.81.79 Fax. (+34) 972.41.80.98

2 1

[Dovecot] help please with lda and exim transports
by razor 15 Sep '06

15 Sep '06

hello All i am trying to fix the dovecot quotas and red that LDA helps... so i looked wikki and : dovecot_delivery: driver = pipe debug_print = "T: ldap_maildir_home for $local_part@$domain" command = /usr/local/libexec/dovecot/deliver -d $local_part@$domain message_prefix = message_suffix = user = mailnull group = mail delivery_date_add envelope_to_add return_path_add log_output but in exim.log i received 2006-09-15 15:40:41 1GOCzo-0006ih-Vw ** xxx(a)xxxxx.Xx R=ldap_user T=dovecot_delivery: Child process of dovecot_delivery transport returned 67 (could mean user nonexistent) from command: /usr/local/libexec/dovecot/deliver what it can be? -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

1 0

[Dovecot] Problem with MySQL
by Emmeran Sollner 15 Sep '06

15 Sep '06

Hi there, I tried to setup a passwddb with mysql, but it wont connect to my database, even if I patch the driver-mysql.c Here a test program I wrote to check the connection: int main() { MYSQL mysql; mysql_init(&mysql); if (mysql_real_connect(&mysql, NULL, "root", "asd2sdf3", "ccc", 0, "/var/lib/mysql/mysql.sock", 0) == NULL) printf("connection failed: %s\n", mysql_error(&mysql)); else printf("nos problemos\n"); return 0; } This program executed says "nos problemos" --> connection works The same data in dovecot.conf brings up this: Sep 15 03:08:38 suse10064lamp dovecot: auth-worker(default): ok... connecting to mysql: host='(null)', user='root', pass='asd2sdf3', db='ccc', port='0', sock='/var/lib/mysql/mysql.sock' Sep 15 03:08:38 suse10064lamp dovecot: auth-worker(default): mysql: Connect failed to /var/lib/mysql/mysql.sock (ccc): Access denied for user 'root'@'localhost' (using password: YES) - waiting for 1 seconds before retry I added a i_info() in front of the mysql_real_connect command to test if the data from the config file is transmitted correctly (first line above) --> it is So i tried to connect to mysql with the line from my test-program. this is the patched code: i_info("ok... connecting to mysql: host='%s', user='%s', pass='%s', db='%s', port='%i', sock='%s'", host, db->user, db->password, db->dbname, db->port, unix_socket); /* failed = mysql_real_connect(conn->mysql, host, db->user, db->password, db->dbname, db->port, unix_socket, db->client_flags) == NULL; */ failed = mysql_real_connect(conn->mysql, NULL, "root", "asd2sdf3", "ccc", 0, "/var/lib/mysql/mysql.sock", 0) == NULL; And it still says: Sep 15 03:08:38 suse10064lamp dovecot: auth-worker(default): ok... connecting to mysql: host='(null)', user='root', pass='asd2sdf3', db='ccc', port='0', sock='/var/lib/mysql/mysql.sock' Sep 15 03:08:38 suse10064lamp dovecot: auth-worker(default): mysql: Connect failed to /var/lib/mysql/mysql.sock (ccc): Access denied for user 'root'@'localhost' (using password: YES) - waiting for 1 seconds before retry Any ideas? Thx in advance, Emmeran

2 1

[Dovecot] 1.0rc7 - dumb question
by Odhiambo WASHINGTON 15 Sep '06

15 Sep '06

I am configuring dovecot 1.0rc7 to authenticate users (system users) in /etc/passwd. Is it possible to use a different auth mechanism, other than "plain", when the encrypted password is in /etc/master.passwd (BSD style)? -Wash http://www.netmeister.org/news/learn2quote.html DISCLAIMER: See http://www.wananchi.com/bms/terms.php -- +======================================================================+ |\ _,,,---,,_ | Odhiambo Washington <wash(a)wananchi.com> Zzz /,`.-'`' -. ;-;;,_ | Wananchi Online Ltd. www.wananchi.com |,4- ) )-,_. ,\ ( `'-'| Tel: +254 20 313985-9 +254 20 313922 '---''(_/--' `-'\_) | GSM: +254 722 743223 +254 733 744121 +======================================================================+ The reward of a thing well done is to have done it. -- Emerson

3 5

[Dovecot] ldap quota limitation problem
by razor 14 Sep '06

14 Sep '06

thx 4 your answer i thought that my post didnt in list, so i regestered and repost in: http://dovecot.org/pipermail/dovecot/2006-September/016132.html > Where does the message goes? Is it delivered to the recipient or to a > mailbox of the user? > First one is usual as it uses SMTP. > Bye, > - --Steffen Kaiser yes it is delivered to recipient maildir = Maildir/cur. and no error to my box ... -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

1 0

[Dovecot] ldap quota limitation (one more time)
by razor 14 Sep '06

14 Sep '06

hi there i have a such problem: in dovecot.conf ... protocol imap { listen = *:143 ssl_listen = *:993 mail_plugins = quota imap_quota } ... quota = dirsize:storage=10240 ... in dovecot-ldap.conf: ... user_attrs = uid,,,uid,uidNumber,gidNumber,boxQuota=quota=dirsize:storage ... when an user try to answer out from overquoted box he got the message "overquota blahblahblah", BUT the message still goes... it seems that the imap_quota worked (report about the overquota) but plugin quota dont work. in dovecot logs : ... Sep 14 09:10:23 xxxxxxxxxxx dovecot: IMAP(test4): dirsize quota limit = 1000kB ... but in user maildir/maildirsize: 0S,0C 1179466 16 1248 1 what it can be? -- Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

1 0

[Dovecot] Migrating from uw-imapd to dovecot
by Anne Hammond 14 Sep '06

14 Sep '06

We recently switch from up-imapd to dovecot But many users are reporting that they cannot access certain mail folders. The log file has: imap(dws): Sep 14 00:06:19 Error: File isn't in mbox format: /home/research/dws/mail/TaskDL The files in the logs are "MBX mail folders", not "ASCII English text" as are the folders that can be read under Outlook. Can anyone tell me how to fix this? This is a serious problem in switching. I've read the FAQ and documentation but it doesn't speak to this specific problem. Thanks in advance, Anne Hammond Tech-X Corporation

4 4

Re: [Dovecot] PRoblems using password database
by Bas van den Dikkenberg 14 Sep '06

14 Sep '06

My password file looks this : jaap@aap.nl:$1$bQm0BeAc$0gyjz/JkuYmKIaeGAjJ8b0 What kind of mechanisms must i use? In dovecot 0.9 it was default but when I use play I get the error uid 0 not allowd -----Oorspronkelijk bericht----- Van: Morgan Nightbear [mailto:morgan@nightbear.net] Verzonden: woensdag, september 2006 20:59 Aan: Bas van den Dikkenberg Onderwerp: Re: [Dovecot] PRoblems using password database On Sep 13, 2006, at 2:27 PM, Bas van den Dikkenberg wrote: > Hi every body, > > I am upgrading form 0.9 to 1.0.rc7 > > In the old version I had the following entry's: > > auth_userdb = passwd-file /mailstore/users > auth_passdb = passwd-file /mailstore/passwd > auth=default > > and can't get working I ekeep anding up with the following error : > > -ERR Authentication failed. Check out http://wiki.dovecot.org/MainConfig However, want you want now is something like: auth default { passdb passwd-file { args = /mailstore/passwd } userdb ... -----Morgan

1 0

[Dovecot] Pop get all maildir subfolder
by Beber 14 Sep '06

14 Sep '06

Hi, I'm just starting using dovecot, and find it powerfull and really fast, and have a so configuration, It's just making me happy :) (after tests, and test, and tests). So thanks you for the great job. I've got a question : POP get all my mail in all my maildir subfolder. I find it great and was searching for a pop daemon doing that (and discoved it accidentaly). Althought, I would like that pop daemon don't send mail in INBOX/.Spam. How could I do that ? Thanks -- Beber - E-Mail / Jabber (+GMail) : beber_AT_meleeweb.net http://www.meleeweb.net

1 0

[Dovecot] Active Directory
by Peter Fraser 14 Sep '06

14 Sep '06

Hi all I've been doing research but haven't found anything yet. Is there a doc to show how to get Dovecot to authenticate directly against active directory.

4 3

[Dovecot] Dovecot 1.0.beta9, emails disappearing?
by Martin Végiard 14 Sep '06

14 Sep '06

Hi, I've been using Dovecot successfully for a while and I've recently encountered an issue : I got to work today and half the emails, were deleted... and after careful investigation : - On Monday it seems, the emails magically vanished .. (what I've been told) - My backup from Tuesday morning at 3am, indicates that all the files (mailbox) are intact but the subscription file is missing half the entries. - At noon, on Tuesday, half the subscriptions are still missing and half the files now also missing. Any ideas, known issues, suggestions? Details : # dovecot --version 1.0.beta9 # uname -a NetBSD Z 3.0.1 NetBSD 3.0.1 (GENERIC.MPACPI) #0: Fri Aug 18 08:34:05 EDT 2006 m@Z:/usr/src/sys/arch/i386/compile/GENERIC.MPACPI i386 the server in question is usually just idling away... and nothing abnormal in my logs thanks for your time, Martin

5 7

[Dovecot] Quota plugin API documentation ?
by Craig Huckabee 13 Sep '06

13 Sep '06

What is the best reference for the quota plugin API ? I have some code that can return the disk quota from AFS that I would like to add to the existing file system quota plugin (or perhaps create a new plugin) but I am having a hard time deciphering what each function should return and the data formats (e.g. kilobytes versus bytes). Any pointers are appreciated. --Craig

1 0

[Dovecot] Dovecot Parando
by Kleiton L R Soares 12 Sep '06

12 Sep '06

Olá, estou com um problema que é o seguinte: Tenho uma rede com 400 pessoas, estas possuem cada uma seu e-mail. Quando recebo muitos e-mails ao mesmo tempo meu Dovecot para. Ele continua em execução porém não responde mais, então tenho que reiniciar o serviço. Alguêm pode me ajudar neste problema ? Agradeço desde já, Abraços. -- --- --------------------------- Kleiton L R Soares (21-2620-0735 | 21-9639-5829) PCS - Processos Consultoria Soluções www.pcs.com.br / kleiton(a)pcs.com.br

3 3

[Dovecot] MySQL Authentication
by Peter Fraser 12 Sep '06

12 Sep '06

Hi all I have this interesting issue. I installed dovecot on FreeBSD 6.1. The install went well. I'm trying to get it to use a mysql database that postfix is already using to authenticate. When I use this in dovecot.conf userdb mysql { args = /usr/local/etc/dovecot/dovecot-mysql.conf } passdb mysql { args = /usr/local/etc/dovecot/dovecot-mysql.conf } I get this error. auth(default): Unknown passdb driver 'mysql' (typo, or Dovecot was built without support for it? Check with dovecot --build-options) This is strange because I did compile it with mysql support. Any ideas here?

2 1

[Dovecot] TAB characters in subject header continuation/wrap lines
by Stephen Warren 12 Sep '06

12 Sep '06

I have some emails where the Subject line has been wrapped, and subsequent lines are indented with TAB characters. Specifically, here's a dump of a portion of an email: 0002020 C c : sp nl S u b j e c t : sp [ B 0002040 u i l d b o t ] sp B u i l d B o 0002060 t sp S U C C E S S nl ht ( B l d _ 0002100 g s s d k _ g s s d k _ t e s t 0002120 _ 2 0 0 6 _ 0 9 _ 1 2 _ 0 0 _ 0 0002140 1 _ 0 0 _ I n c r e m e n t a l 0002160 _ 2 ) nl X - B e e n T h e r e : Note the HT about half way through the third line. When I view this email using Thunderbird 1.5.0.5 on Windows XP, with Dovecot 1.0.rc7 running on CentOS 4.3, this TAB character shows up as a funny character in the subject line, as displayed by the Thunderbird. My question is: Should Dovecot be detecting mail header continuation lines that start with a TAB, and stripping the TAB (converting to a space)? I *think* that's what the RFCs implied when I read up on this a few months ago, but I may easily be mis-remembering. A second somewhat off-topic question: When the automated system that sends out these messages sends them to me directly, this problem does not occur, because the email titles are not wrapped. However, when I receive these emails via a mailman mailing list, mailman prepends the text "[Buildbot]" on the front of the title, thus making the title long enough to require wrapping. As such, I imagine that it's mailman that is indenting the Subject continuation line with the TAB character. Is there an issue in mailman - should mailman be indenting with e.g. a SPACE character, or is mailman's action perfectly legal? Thanks for any pointers.

2 2

[Dovecot] Using pgsql with 'cram-md5 auth' and 'hmac-md5 scheme'
by Jonathan Ballet 12 Sep '06

12 Sep '06

Hello, I want to use PostgreSQL to store my Dovecot users. I setup a very basic configuration, following word for word this page http://wiki.dovecot.org/DovecotPostgresql and it works ... almost. In fact, it works if I use PLAIN password scheme in my database. However, I would like to store them encrypted. But, if I replace the password field for my user with {HMAC-MD5}-... (the password generated by dovecotpw), it doesn't work. Here is the log, using PLAIN password scheme (all debug options activated) : =================================================== auth(default): client in: AUTH 1 CRAM-MD5 service=IMAP secured lip=127.0.0.1 rip=127.0.0.1 auth(default): client out: CONT 1 PDU3NTgxMTE5MTcwMTYzNjguMTE1ODAxMTQzN0BkZWI2ND4= auth(default): client in: CONT 1 am9uIDJjN2RmMDVmZWZiNWU4MmE0MzFkMjM2YThhYzc2MDAx auth(default): sql(jon,127.0.0.1): query: SELECT userid as user, password FROM users WHERE userid = 'jon' auth(default): password(jon,127.0.0.1): Credentials: 3fd9989457cb3edf1fb8d31dddaf11f3f0efee3423aeb9ebf9bbe981f86a079b auth(default): client out: OK 1 user=jon auth(default): master in: REQUEST 1 23748 1 auth(default): sql(jon,127.0.0.1): SELECT home, uid, gid FROM users WHERE userid = 'jon' auth(default): master out: USER 1 jon home=/var/mail/jon/ uid=5000 gid=5000 IMAP(jon): Effective uid=5000, gid=5000 IMAP(jon): maildir: data=/var/mail/jon IMAP(jon): maildir:root=/var/mail/jon, index=/var/mail/jon, control=, inbox= imap-login: Login: user=<jon>, method=CRAM-MD5, rip=127.0.0.1, lip=127.0.0.1, secured IMAP(jon): Disconnected: Logged out And here is the log, using HMAC-MD5 password scheme (all debug options activated too) : ===================================================== auth(default): client in: AUTH 1 CRAM-MD5 service=IMAP secured lip=127.0.0.1 rip=127.0.0.1 auth(default): client out: CONT 1 PDI0MDc4NTQzMDc5NjU2NTIuMTE1ODAxMTkxNUBkZWI2ND4= auth(default): client in: CONT 1 am9uIDViNmE4NDI5ZjUzZTQ3YTEzZmEzNjhiOThlYjI5OTFi auth(default): sql(jon,127.0.0.1): query: SELECT userid as user, password FROM users WHERE userid = 'jon' auth(default): password(jon,127.0.0.1): Credentials: auth(default): cram-md5(jon,127.0.0.1): password mismatch auth(default): client out: FAIL 1 user=jon imap-login: Disconnected: user=<jon>, method=CRAM-MD5, rip=127.0.0.1, lip=127.0.0.1, secured The login + password used for those tests are 'jon'/'jonpwd'. In the second example, I didn't get any Credentials, whereas in the first case (PLAIN scheme), the Credentials output correspond to the 'dovecotpw' generated password (as in `dovecotpw -s HMAC-MD5 -p jonpwd`). I don't know if it's normal or not. So, I'm not sure what to do next :/ I use this kind of 'auth mechanism'/'password scheme' on another computer, with passwd-like files, and it works. So, I don't know why the same data, coming from another location, doesn't work. Any help would be greatly appreciated ! Thanks, -- Jonathan

3 7

[Dovecot] Dovecot go Down !
by Kleiton L R Soares 12 Sep '06

12 Sep '06

Excuse-me mr. Luca. Translating to you understand. Hello Peoples of the list. I'm have a problem I'm have a wide with 400 people, each user have a self mail. But when my server receive much mails the dovecot goes down and only return to activity when i restart the service. The service dovecot don-t stop, the service dovecot don't answer ! Somepeople can help-me ? Thanks ! Agradeço desde já, Abraços. :) -- --- --------------------------- Kleiton L R Soares (21-2620-0735 | 21-9639-5829) PCS - Processos Consultoria Soluções www.pcs.com.br / kleiton(a)pcs.com.br

2 1

[Dovecot] Mail does not arrive at my server.
by Wolfgang Paul Rauchholz 12 Sep '06

12 Sep '06

I run under FC5. I want to setup a mail server with postfix (already runnung) and dovecot. Once this i working I add spamassassin and clamav. I setup postfix and can send emails. When replying to these emails they do not get to my server (I checked in the Maildir directory of the user, there is no file) The server has 2 NICs. there is a firewall where I opened the port 143 (that is for IMAP?) 0 0 ACCEPT tcp -- eth1 * 0.0.0.0/0 0.0.0.0/0 state NEW tcp dpt:143 flags:0x17/0x02 the only change I made to the dovecot.conf files is: protocols = imap I did not touch the rest as in the comments of the file it says # Default values are shown after each value, it's not required to uncomment # any of the lines. Any hint on what I am doing wrong is welcomed. Thanks in advance

5 6

[Dovecot] userdb/autdb via ldaps
by Jürgen Herz 12 Sep '06

12 Sep '06

Hello, I'm using a OpenLDAP server to store mail users infos like maildir location and password. This server is running on a separate machine and I'd like to protect the connection to it by using SSL/TLS. The server is configured so that it offers ldaps and it works with other clients. But I haven't found how to configure dovecot to use ldaps. Would someone please direct me to the right place or directly help how to? Greets, Jürgen

2 3

[Dovecot] Plugins for Dovecot at FreeBSD 6.0
by Boris Ivanov 12 Sep '06

12 Sep '06

Hi I met problem developing plug-in under FreeBSD 6.1. First I tried to use internal plugins like quota and acl but I got: IMAP(xxx): module /usr/local/lib/dovecot/imap/lib01_acl_plugin.so: dlsym(acl_plugin_init) failed: Shared object "nss_dns.so.1" not found, required by "imap" This library doesn't exist on FreeBSD 6.1 Same story when u mention any plugin in dovecot.conf… Any ideas how to fix it? -- Yours Boris

3 6

[Dovecot] Namespace with a single mailbox (for spam)
by Tom Alsberg 12 Sep '06

12 Sep '06

Hi there. Perhaps this is answered somewhere, but a short search through the mailing list and Wiki yielded nothing. We have spam filtering set up for all users, with all messages over some spam threshold going to a separate mbox. There is one directory containing the spam mboxes of all users (call it "/var/spool/spam", right now), with the spam box of a user residing in /var/spool/spam/<user>. I am trying to achieve that, in IMAP, each user will see his spam mbox as a folder named "SPAM" or something like that (possibly under some new namespace), without creating a symbolic link for each user. Is there any facility for that? Specifically, I do not want to create a single namespace pointing to the directory, since that will cause each user to have to access his spam folder under a different name (e.g. #spam.<user>), and users will also see (although not be able to read) others' spam folders. Regards, -- Tom -- Tom Alsberg - hacker (being the best description fitting this space) Web page: http://www.cs.huji.ac.il/~alsbergt/ DISCLAIMER: The above message does not even necessarily represent what my fingers have typed on the keyboard, save anything further.

3 5

[Dovecot] bug report, from apple.com
by Jason Fesler 11 Sep '06

11 Sep '06

Bruce includes detailed information including the imap session. Bruce works at Apple, on the Apple Mail.app product. ---------- Forwarded message ---------- From: Bruce Arthur <barthur(a)apple.com> To: dovecot(a)dovecot.org Cc: Bruce Arthur <barthur(a)apple.com> Date: Tue, 29 Aug 2006 09:04:35 -0700 Subject: Problem using Apple Mail with Dovecot Server Configuration: dovecot-1.0.rc6 Built with: ./configure --prefix=/usr/local OS: FreeBSD 4.10-STABLE i386 running on ufs Client configuration Mac OS X 10.4.7, using Apple Mail client. Issue: Apple Mail is able to connect to the server, but it is not seeing the available folder correctly. I did a little debugging and it looks like dovecot is failing to provide the separator in response to the LIST command. I did not spend anytime trying to figure out how other mail clients are getting this (my tcpdump is a little rusty these days). Here is what I see Mail sending to the server, and it's responses. 1 LOGIN applecot ******** 1 OK Logged in. 2 CAPABILITY * CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS 2 OK Capability completed. 3 LIST "" "" 3 OK List completed. The "LIST" command should be sending back the mailbox separator. The IMAP spec seems pretty clear about this (but reading RFC's is always a bit of a challenge). From the RFC: http://www.ietf.org/rfc/rfc2060.txt 6.3..8. LIST Command Arguments: reference name mailbox name with possible wildcards Responses: untagged responses: LIST Result: OK - list completed NO - list failure: can't list that reference or name BAD - command unknown or arguments invalid An empty ("" string) reference name argument indicates that the mailbox name is interpreted as by SELECT. The returned mailbox names MUST match the supplied mailbox name pattern. A non-empty reference name argument is the name of a mailbox or a level of mailbox hierarchy, and indicates a context in which the mailbox name is interpreted in an implementation-defined manner. An empty ("" string) mailbox name argument is a special request to return the hierarchy delimiter and the root name of the name given in the reference. The value returned as the root MAY be null if the reference is non-rooted or is null. In all cases, the hierarchy delimiter is returned. This permits a client to get the hierarchy delimiter even when no mailboxes by that name currently exist. Example: C: A101 LIST "" "" S: * LIST (\Noselect) "/" "" S: A101 OK LIST Completed C: A102 LIST #news.comp.mail.misc "" S: * LIST (\Noselect) "." #news. S: A102 OK LIST Completed C: A103 LIST /usr/staff/jones "" S: * LIST (\Noselect) "/" / S: A103 OK LIST Completed C: A202 LIST ~/Mail/ % S: * LIST (\Noselect) "/" ~/Mail/foo S: * LIST () "/" ~/Mail/meetings S: A202 OK LIST completed -- Bruce ------- From: Jason Fesler <jfesler(a)gigo.com> To: Bruce Arthur <barthur(a)apple.com> Cc: dovecot(a)dovecot.org Date: Tue, 29 Aug 2006 10:41:55 -0700 (PDT) Subject: Re: Problem using Apple Mail with Dovecot > Server Configuration: > dovecot-1.0.rc6 > Built with: ./configure --prefix=/usr/local > OS: FreeBSD 4.10-STABLE i386 running on ufs Thanks, Bruce. Timo et all; Bruce specifically has been looking at my instance of dovecot after a friend of his reported problems with Mail.app and my server. More information: Stock dovecot namespaces work; This name space does not: namespace private { separator = . prefix = INBOX. inbox = yes hidden = no } namespace private { separator = / inbox = no hidden = yes prefix = "#mail/" location = mbox:/home/%u/mail }

9 19

[Dovecot] what defines dovecot LOG perms?
by OpenMacNews 11 Sep '06

11 Sep '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 on dovecot launch, 'dovecot.log' is created as: -rw------- 1 root testuser 271 2006-09-11 07:58 dovecot.log which causes an apparent perms prob with exim using dovecot's LDA ... what/how do i define/change the LOG's ownership/perms with? it seems to ignore the dovecot.conf umask setting, etc. thx. richard - -- /"\ \ / ASCII Ribbon Campaign X against HTML email, vCards / \ & micro$oft attachments [GPG] OpenMacNews at gmail dot com fingerprint: 50C9 1C46 2F8F DE42 2EDB D460 95F7 DDBD 3671 08C6 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (Darwin) iEYEARECAAYFAkUFepwACgkQlffdvTZxCMaXoACfdGwNb8NQUZCfn6AlCswqbgrB T6IAoI0OMmhFsjWts3zAqIK3Ol32MwP7 =w1XL -----END PGP SIGNATURE-----

2 4

[Dovecot] Wrong content-type reported for messages with only a text/html body?
by Mathijs den Burger 11 Sep '06

11 Sep '06

Hi all, It looks like Dovecot 1.0rc7 reports the wrong content-type for messages with only a text/html body. An example of such a message is: --- From: mathijs(a)izecom.com Subject: test To: foobar(a)example.com Content-Type: text/html; test --- When I talk IMAP to Dovecot directly using telnet and fetch the bodystructure of this message, Dovecot replies: * 1 FETCH (BODYSTRUCTURE ("text" "plain" ("charset" "us-ascii") NIL NIL "7bit" 6 1 NIL NIL NIL)) I guess that should be 'text/html', not 'text/plain'. Is this a bug or am I missing something here? FYI: I run Dovecot on Debian stable with version 1.0rc7 compiled from source. cheers, Mathijs

2 1

[Dovecot] AppleMail 1.3 filter problem [solved] / fc5 package of 1.0rc7
by Bill McGonigle 11 Sep '06

11 Sep '06

Hi, Folks, I recently migrated from courier-imapd to dovecot when I migrated a machine from rh9 to fc5. I managed to hit a snag with the 1.0b8 version of dovecot that's currently in fc5. With AppleMail 1.3 I was seeing most of my incoming mail go missing. To make a long story short, AppleMail was applying mail filters inappropriately (walking right past a 'stop processing' rule and moving my incoming mail into folders specified for Act-On actions). This made the AppleMail 1.3 client unusable with 1.0b8. Before complaining here I figured I ought to try the current version, and, sure enough, 1.0rc7 fails to cause AppleMail to go insane like 1.0b8 did. I'm not sure which change between b8 and rc7 is the important one, but rc7 seems to work well. I saw the pointer on the Wiki to the ATRPM's repository which had a current RPM, but looking at the included patches in their SRPM they seem to be doing things somewhat differently than the Fedora guys are (default settings, etc.), so, I figured for my machine I'd rather stay as close to the Fedora methodology to make future upgrades perhaps less painful. To that end I took the SRPM for b8 from fc5 and modified it as little as possible to make it work with 1.0rc7. One bugfix patch was left out as that seems to have been fixed in the Dovecot source during the interim period. I put the resulting RPM and SRPM up here: http://bfccomputing.com/downloads/dovecot/ in case anybody wants to use it, review it, merge it into Fedora Core, their repo, etc. I'm neither an RPM packing nor Dovecot source expert and I've only tested it lightly, but I'm using it currently and haven't seen problems. -Bill ----- Bill McGonigle, Owner Work: 603.448.4440 BFC Computing, LLC Home: 603.448.1668 bill(a)bfccomputing.com Cell: 603.252.2606 http://www.bfccomputing.com/ Page: 603.442.1833 Blog: http://blog.bfccomputing.com/ VCard: http://bfccomputing.com/vcard/bill.vcf

2 2

[Dovecot] Create subfolder
by Hugo Dubé 11 Sep '06

11 Sep '06

I have dovecot on Fedora Core 5 and I want to create a subfolder. By default its impossible!!!! I setup dovecot for maildir and after I able to create a subfolder. But I cant receive my old and new email on this format. I read dovecot documentation at http://wiki.dovecot.org/QuestionsAndAnswers#head-35b621e067b7e72c1d1e47886f4 00a1a784bd95c and its write: For ordinary local Unix users, you may want to specify the mail environment as "maildir:%h/Maildir:INBOX=/var/mail/%n". There are two reasons. First, mail can be delivered there without consuming the user's disk quota on the home directory. Second, the user's home directory may prohibit access to any users other than the owner and the privileged user root. Having the INBOX outside the user's home directory permits mail delivery by programs running without root privileges, but belong to the group mail. I try it with maildir:%h/Maildir:INBOX=/var/mail/%n and dont work. I cant connect to my imap server. Help me please!!! Hugo

1 0

[Dovecot] dovecot LDA w/ exim: "dyld: Library not loaded" & "trace trap" errors
by OpenMacNews 10 Sep '06

10 Sep '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hi, i've Dovecot 10branch head built on on OSX 10.4.7. i've also exim 4.63 configured for use with dovecot's AUTH. on local delivery via exim -> dovecot LDA, i see two errors: (1) dovecot_lda transport output: dyld: Library not loaded: /usr/local/ssl/lib/libssl.0.9.8.dylib (2) Child process of dovecot_lda transport (running command "/usr/local/dovecot/libexec/dovecot/deliver -c /var/MailServer/Conf/dovecot.conf -d $local_part@$domain") was terminated by signal 5 (trace trap) the more i stare at this, the more i think this is a dovecot issue ... thoughts/suggestions ? details: % exim -bV Exim version 4.63 #1 built 09-Sep-2006 11:58:58 Copyright (c) University of Cambridge 2006 Berkeley DB: Sleepycat Software: Berkeley DB 4.3.29: (June 7, 2006) Support for: crypteq PAM TCPwrappers OpenSSL Content_Scanning Old_Demime Experimental_DomainKeys Lookups: lsearch wildlsearch nwildlsearch iplsearch cdb dbm dbmnz dsearch mysql Authenticators: cram_md5 plaintext dovecot Routers: accept dnslookup ipliteral manualroute queryprogram redirect Transports: appendfile/maildir/mailstore/mbx autoreply lmtp pipe smtp Fixed never_users: 0 Size of off_t: 8 Configuration file is /var/MailServer/Conf/Exim/exim.conf in my exim.conf, i've set up to use dovecot's LDA: ... begin routers ... dovecot_localuser: debug_print = "EXIM-DEBUG [R:dovecot_localuser] for $local_part@$domain" driver = accept domains = +local_domains local_part_suffix = +* local_part_suffix_optional transport = dovecot_lda ... begin transports ... dovecot_lda: debug_print = "EXIM-DEBUG [T:dovecot_lda] for $local_part@$domain" driver = pipe command = /usr/local/dovecot/libexec/dovecot/deliver \ -c /var/MailServer/Conf/Dovecot/dovecot.conf \ -d $local_part@$domain message_prefix = "" message_suffix = "" delivery_date_add envelope_to_add return_path_add log_output user = vmail ... when i test a local smtp exim devliery w/: % exim -v -odf testuser(a)testdomain.com LOG: MAIN cwd=/usr/local 4 args: exim -v -odf testuser(a)testdomain.com Test message. . i see as response in console: LOG: MAIN <= root(a)testdomain.com U=root P=local S=456 LOG: MAIN cwd=/var/MailServer/Mail/Queue 5 args: /usr/local/exim/bin/exim -v - -odi -Mc J5CFC3-0007YC-99 delivering J5CFC3-0007YC-99 EXIM-yes [R:dovecot_localuser] for testuser(a)testdomain.com EXIM-yes [T:dovecot_lda] for testuser(a)testdomain.com LOG: MAIN <testuser(a)testdomain.com>: dovecot_lda transport output: dyld: Library not loaded: /usr/local/ssl/lib/libssl.0.9.8.dylib LOG: MAIN ** testuser(a)testdomain.com F=<root(a)testdomain.com> P=<root(a)testdomain.com> R=dovecot_localuser T=dovecot_lda: Child process of dovecot_lda transport (running command "/usr/local/dovecot/libexec/dovecot/deliver -c /var/MailServer/Conf/dovecot.conf -d $local_part@$domain") was terminated by signal 5 (trace trap) LOG: MAIN cwd=/var/MailServer/Mail/Queue 9 args: /usr/local/exim/bin/exim -v - -odi -t -oem -oi -f <> -EJ5CFC3-0007YC-99 LOG: MAIN <= <> R=J5CFC3-0007YC-99 U=testuser P=local S=1485 T="Mail delivery failed: returning message to sender" ... if i, however, test the dovecot local delivery directly @ shell: % /usr/local/dovecot/libexec/dovecot/deliver -c /var/MailServer/Conf/Dovecot/dovecot.conf -d testuser(a)testdomain.com i see no 'complaints' about ssl lib ... dovecot: Sep 09 14:06:50 Info: auth(default): master in: USER 1 testuser(a)testdomain.com service=deliver dovecot: Sep 09 14:06:50 Info: auth(default): master out: USER 1 testuser(a)testdomain.com static uid=301 gid=301 home=/var/MailServer/Mail/Dovecot/Domains/testdomain.com/Accounts/testuser nice=10 so, where to begin with this? is this an exim or dovecot issue? thanks! richard - -- /"\ \ / ASCII Ribbon Campaign X against HTML email, vCards / \ & micro$oft attachments [GPG] OpenMacNews at gmail dot com fingerprint: 50C9 1C46 2F8F DE42 2EDB D460 95F7 DDBD 3671 08C6 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (Darwin) iEYEARECAAYFAkUDRakACgkQlffdvTZxCMYoHwCdGSaSeNok1B2ZYMnrNdaGFCj5 z4sAoIAKloPRwMD8GJgHT4BYwbS7Mecr =HKZx -----END PGP SIGNATURE-----

1 0

[Dovecot] Password mismatch - SHA1 authentication problem.
by guard 09 Sep '06

09 Sep '06

On Thu, 31 Aug 2006, guard wrote: > > Hello, > I have problem with authentication. > I'm using SHA1 passwords stored in MySQL. > > From debug: > Info: auth-worker(default): sql(test@mail, IP): query: SELECT password FROM > vmail WHERE mail = 'test@mail' > Info: auth-worker(default): sql(test@mail ,IP): Password mismatch > Info: auth-worker(default): sql(test@mail ,IP): SHA1(dupadupa) != > '2bca9dbe8a14811c687bb8c51c0e1cd14db8a018' > > I tried convert password to upper case, but it didn't help. Then I > tried authentication in plain text and everything works fine... > So, does dovecot crypt SHA1 using other method? > > I also use same SHA1 passwords to authenticate users in exim and it doesn't > have any problem with that. > > I'm using mysql 5.0.24 and dovecot 1.0 rc7. I have found the reason why i can not authenticate users using SHA1 passowds. Problem is dovecot stores sha1 as "sum of the password stored in base64" but mysql and exim store it in hex. Question is why, and does anyone have patch for it? Best regards, Tomasz Krynicki

1 0

[Dovecot] Virtual and system users
by Max A 08 Sep '06

08 Sep '06

Hi. I can not understand, how at presence of system users (passdb shadow and userdb passwd) and virtual (for example, user(a)host.domain.com as system user and user(a)domain.com as virtual) to allow virtual users to not enter a domain part of username at a login, and to allow system users to use a full name (user(a)host.domain.com)? I have read the documentation and default config - I can not understand, how it can be made? If the parameter "auth_username_format = %n" worked inside of separate passdb{} and userdb{} sections, it can be realized, but it does not work inside of them :( . --- M. Alhimenko.

1 0

[Dovecot] quota infor @ wiki page
by OpenMacNews 08 Sep '06

08 Sep '06

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hi matthias, reading the dovecot wiki page: http://wiki.dovecot.org/Quota that, apparently, you last edited (created?): Quota (last edited 2006-06-13 15:27:38 by MatthiasAndree) i note: " plugin { # 10 MB quota limit quota = maildir:storage=10240 # 1000 messages quota limit quota = maildir:messages=1000 # 10 MB + 1000 messages quota limit quota = maildir:storage=10240:messages=1000 } The above example shows how to set the same quota globally for everyone. You can override this for one or all users by returning a quota field from the user database. See UserDatabase for more information about how to set them for the user database you are using. Here is an example using a SQL-based user database: " i'm (currently) attempting to assign per-user quotas in a 'userdb static' scenario, where, in my dovecot.conf, i've: protocol imap { ... plugin { quota = maildir:storage=10240 } ... } auth default { ... passdb passwd-file { args = /var/MailServer/Data/USERS/imap.users } userdb static { args = static uid=300 gid=300 home=/var/MailServer/Mail/Dovecot/Domains/%d/Accounts/%n nice=10 } ... } so, per 'your' suggestion @ the wiki page, i nav to: http://wiki.dovecot.org/UserDatabase then: http://wiki.dovecot.org/AuthDatabase/PasswdFile where the example for userdb is given as: Or for passdb and userdb: user:{plain}pass:1000:1000::/home/user::mail=maildir:~/Maildir allow_nets=192.168.0.0/24 which, iiuc, would 'translate' to quota in my scenario as, in the "/var/MailServer/Data/USERS/imap.users" file: user:{plain}pass::::::quota=maildir:storage=4096 Unfortunately, when I do make this change, dovecot starts without error, BUT the given user's QUOTA *remains* at the global setting of (in this example) '10240'. i.e., the per-user override is, seemingly, not recognized. i'd make an add/change/comment *to* the wiki page, but it's set as an "Immutable Page". can you, perhaps, comment/clarify? any suggestions? many thanks! richard - -- /"\ \ / ASCII Ribbon Campaign X against HTML email, vCards / \ & micro$oft attachments [GPG] OpenMacNews at gmail dot com fingerprint: 50C9 1C46 2F8F DE42 2EDB D460 95F7 DDBD 3671 08C6 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.5 (Darwin) iEYEARECAAYFAkUBgJ8ACgkQlffdvTZxCMYHrQCaAtvv9WvetLoA0BVd8lLfIHa0 rosAoL3l3rNuBHwwJ+sLi3qqT4fw50bH =wl2c -----END PGP SIGNATURE-----

1 0

[Dovecot] quota plugin feature request
by Michael Tibben 08 Sep '06

08 Sep '06

Hi am having an issue with the quota plugin To reproduce: - have a mailbox close to its quota limit (say 10 MB), and a large email in the inbox (say 6 MB) - use Squirrelmail or Thunderbird to delete the email The operation fails, as by default the email client seems to try and copy the message into the Trash before deleting it from the inbox, and dovecot will correctly deny the copy operation as the quota will be exceeded if the message is copied... Because of this, I am wondering if it is possible to have an option for the quota plugin to track, but not enforce the quota. This is because I don't require quota enforcement on IMAP operations, as Postfix will enforce quota on incoming mail anyway. Attached is a quick hack job I did on the plugin to strip out the enforcing functionality, but it would be great if this could be a configurable option.. Thanks Michael --- ./dovecot-1.0.rc7/src/plugins/quota/quota-storage.c.orig 2006-09-07 14:56:57.000000000 +1000 +++ ./dovecot-1.0.rc7/src/plugins/quota/quota-storage.c 2006-09-07 15:12:41.000000000 +1000 @@ -116,8 +116,8 @@ struct quota_transaction_context *qt = QUOTA_CONTEXT(t); int ret; bool too_large; - - ret = quota_try_alloc(qt, mail, &too_large); + return 0; +/* ret = quota_try_alloc(qt, mail, &too_large); if (ret > 0) return 0; else if (ret == 0) { @@ -127,7 +127,7 @@ mail_storage_set_error(t->box->storage, "%s", quota_last_error(quota)); return -1; - } + }*/ } static int @@ -167,7 +167,7 @@ { struct quota_transaction_context *qt = QUOTA_CONTEXT(t); struct quota_mailbox *qbox = QUOTA_CONTEXT(t->box); - const struct stat *st; +/* const struct stat *st; int ret; st = i_stream_stat(input, TRUE); @@ -181,7 +181,7 @@ I think these don't really matter though compared to the benefit of giving "out of quota" error before sending the full mail. */ - bool too_large; +/* bool too_large; ret = quota_test_alloc_bytes(qt, st->st_size, &too_large); if (ret == 0) {

1 0

[Dovecot] slow attachments loading
by xrado 07 Sep '06

07 Sep '06

when i browse imap with thunderbird, attachments are loadin/downloading really slow although they are size around 2Mb, it takes up to half minute to get it ..really annoying (server is in the same network as client) any idea why is so slow?

1 0

[Dovecot] dovecot-sieve feature
by Luis Venegas 07 Sep '06

07 Sep '06

Hi all., I am uing dovecot rc7 and dovecot-sieve both compiled from source. If I test sieve with feature redirect require "redirect"; redirect "user@domain"; keep; log says "sieve parse error: line 1: Unsupported features in require line" Is this normal? Thanks !

2 1

Re: [Dovecot] Plugins for Dovecot at FreeBSD 6.0
by Dominic Marks 07 Sep '06

07 Sep '06

Boris Ivanov wrote: > Hi Dominic > > dovecot itself linked to libc, but what do u mean "removing references > to nss_..."? > May u clear ur answer abit plz? Google shows quite a bit of information about this and it seems related to not clearing errors before using the dl* methods. Shows an (old) patch for Samba3 to add it. http://www.freebsd.org/cgi/cvsweb.cgi/ports/net/samba3/files/Attic/patch-li… Seems like this patch is required for auth/auth-module.c --- auth-module.c Thu Sep 7 14:13:26 2006 +++ auth-module.c.new Thu Sep 7 14:13:08 2006 @@ -59,6 +59,7 @@ return NULL; } + (void)dlerror(); handle = dlopen(path, RTLD_GLOBAL | RTLD_NOW); if (handle == NULL) i_error("dlopen(%s) failed: %s", path, dlerror()); @@ -89,6 +90,7 @@ } } + (void)dlerror(); if (dlclose(module->handle) != 0) i_error("dlclose() failed: %s", dlerror()); i_free(module->name); This is against RC7. Cheers, Dominic > Thank you > > Boris > > On 07/09/06, *Dominic Marks* <dom(a)goodforbusiness.co.uk > <mailto:dom@goodforbusiness.co.uk>> wrote: > > Boris Ivanov wrote: > > Hi > > > > I met problem developing plug-in under FreeBSD 6.1. > > > > First I tried to use internal plugins like quota and acl but I got: > > > > IMAP(xxx): module /usr/local/lib/dovecot/imap/lib01_acl_plugin.so: > > dlsym(acl_plugin_init) failed: Shared object "nss_dns.so.1" not > found, > > required by "imap" > > > > This library doesn't exist on FreeBSD 6.1 Same story when u > mention any > > plugin in dovecot.conf… > > > > Any ideas how to fix it? > > The nss functions are in libc. So I'd guess removing all reference to > any nss_*.so > libs would be sufficient. > > > -- > > Yours > > Boris > > Dominic > > > > > -- > Yours > Boris

1 0

[Dovecot] dovecot ignoring config file contents -- istream.c problem?
by pavol marko 07 Sep '06

07 Sep '06

Hello! This is my first time trying to run dovecot so maybe I've overlooked something, but I'm having a hard time running dovecot. First of all, it's worth noting that I'm trying to run dovecot on an embedded platform: the target architecture is mipsel; I have patches for the 2.4.18 kernel with special support for the board so I'm still using the 2.4.18 kernel. My C library is uClibc (I forget which version; will look it up later). The compiler I'm using is GCC 2.96. Anyway, after some struggling, I got dovecot to compile. These are my configure options: ./configure --prefix=/home/marko/ovis/myfirm/tmp/ --build=i686-linux --host=mipsel-uclibc-linux --disable-static --disable-rpath --disable-ipv6 --with-pic --with-notify=none --without-shadow --without-pam --with-checkpassword --without-bsdauth --without-vpopmail --without-ssl --without-pop3d --without-docs dovecot compiles and runs, but no matter what I put in dovecot.conf, it says something like "SSL support not build in but ssl_disable=no". I've even tried putting garbage into the config file (like hello=test ; on my desktop dovecot complains on that line, it is completly ignored on my embedded device). But when I delete the config file, dovecot complains. So I've done some printf-debugging in lib-settings/settings.c, and fount out that: control flow reaches the line input = i_stream_create_file(fd, default_pool, 2048, TRUE); but then no single iteration of the while loop is executed. Do you have any idea what could be wrong here? Any help is greatly appreciated ! Thank you. Pavol Marko

3 3

[Dovecot] Quotas with MySQL
by Neil Smith 07 Sep '06

07 Sep '06

Hello, I've had a look through past messages and I think this has been brought up but I'm not sure what the outcome of it was. I'm trying to use quotas with a MySQL dict backend. I am using Dovecot version 1.0.rc6-1 from the Debian Testing package on a x86 machine. My dovecot.conf file has the following entries which I took from the Wiki: dict { quotadict = mysql:/etc/dovecot/dovecot-dict-quota.conf } plugin { quota = dict:storage=10240 proxy::quotadict } and my dovecot-dict-quota.conf looks like the following, again from the Wiki: connect = host=127.0.0.1 dbname=mail user=<user> password=<passwd> table = quota select_field = current where_field = path username_field = username and my MySQL table is as follows: create table quota ( username varchar(255) not null, path varchar(255) not null, current integer, primary key (username, path) ); Now with this setup, the query for looking up the current quota appears in the MySQL logs as: SELECT current FROM quota WHERE path = 'quota/storage' AND username = 'neil(a)example.com' and the query for Inserting/Updating the quota is: BEGIN;INSERT INTO quota (current, path, username ) VALUES ('quota/storage', 0, 'neil(a)example.com') ON DUPLICATE KEY UPDATE current = current + 0;COMMIT With latter query, it appears to be trying to insert 'quota/storage' into `current` and 0 into `path`. This seems to be the wrong way around. Is that correct? If I change my dovecot-dict-quota.conf file to read: connect = host=127.0.0.1 dbname=mail user=<user> password=<passwd> table = quota select_field = path where_field = current username_field = username the two queries now look like: SELECT path FROM quota WHERE current = 'quota/storage' AND username = 'neil(a)example.com' and BEGIN;INSERT INTO quota (path, current, username ) VALUES ('quota/storage', 0, 'neil(a)example.com') ON DUPLICATE KEY UPDATE current = current + 0;COMMIT Although the latter query now works as expected and does update the quota in the database, the former query is now incorrect. Is this a problem with my configuration or is it a bug? If a bug, has it been corrected in Version 1.0.rc7? Thank you all. Neil

2 2

[Dovecot] Using Dovecot SASL with postfix
by Jonathan Stewart 06 Sep '06

06 Sep '06

I'm trying to use Dovecot SASL with postfix 2.3.3 and when trying to send mail I get the debug output below. I don't know enough about whats going on to know where the problem is but something clearly is not right. I would send the configurations for postfix and dovecot except they are clearly talking to each other so I kinda doubt its a configuration issue. The machine can afford to be down for an hour or two at a time for testing stuff if needed. Sep 6 12:04:10 server postfix/smtpd[13555]: connect from mobile-166-137-248-219.mycingular.net[166.137.248.219] Sep 6 12:04:17 server dovecot: auth(default): client in: AUTH 1 PLAIN service=smtp Sep 6 12:04:17 server dovecot: auth(default): client out: CONT 1 Sep 6 12:04:18 server dovecot: auth(default): client in: CONT 1 jonathan Sep 6 12:04:18 server dovecot: auth(default): plain(?): invalid input Sep 6 12:04:19 server dovecot: auth(default): client out: FAIL 1 Sep 6 12:04:19 server postfix/smtpd[13555]: warning: mobile-166-137-248-219.mycingular.net[166.137.248.219]: SASL PLAIN authentication failed: Sep 6 12:04:20 server postfix/smtpd[13555]: lost connection after AUTH from mobile-166-137-248-219.mycingular.net[166.137.248.219] Sep 6 12:04:20 server postfix/smtpd[13555]: disconnect from mobile-166-137-248-219.mycingular.net[166.137.248.219] A working auth looks like this, I'm thinking that IMAP versus SMTP should not be *too* big a difference in this case. Sep 6 12:06:22 server dovecot: auth(default): client in: AUTH 1 PLAIN service=IMAP secured lip=10.70.3.1 rip=10.70.3.254 Sep 6 12:06:22 server dovecot: auth(default): client out: CONT 1 Sep 6 12:06:22 server dovecot: auth(default): client in: CONT 1 (some kind of hash looking thing) Sep 6 12:06:22 server dovecot: auth(default): client out: OK 1 user=jonathan Sep 6 12:06:22 server dovecot: auth(default): master in: REQUEST 1 13554 1 Sep 6 12:06:22 server dovecot: auth(default): master out: USER 1 jonathan system_user=jonathan uid=1001 gid=1001 home=/home/jonathan Sep 6 12:06:22 server dovecot: imap-login: Login: user=<jonathan>, method=plain, rip=10.70.3.254, lip=10.70.3.1, TLS Thanks, Jonathan

2 2

[Dovecot] Migrando DOVECOT -> Cyrrus-imapd
by Kleiton L R Soares 06 Sep '06

06 Sep '06

Gostaria de saber se alguêm conhece alguma ferramenta de migração de Dovecot para Cyrrus. Tenho minhas inbox em /var/spool/mail. Agradeço desde já. Abraços. -- --- --------------------------- Kleiton L R Soares (21-2620-0735 | 21-9639-5829) PCS - Processos Consultoria Soluções www.pcs.com.br / kleiton(a)pcs.com.br

1 0

[Dovecot] configuration issues / virtual users
by Zbigniew Szalbot 06 Sep '06

06 Sep '06

Hello, It is my first post on this list and I hope someone will be able to help. I have installed dovecot on FreeBSD 6.1. Everything works fine but I wanted to create a way to accept mail to a few virual users and decied to use and example from http://wiki.dovecot.org/VirtualhostingWithExim auth = default auth_userdb = static uid=500 gid=500 home=/home/dovecot/users/%u auth_passdb = passwd-file /home/dovecot/passwd auth_user = dovecot I altered the uid and gid and made sure I have the directories ready and passwd file ok. I altered the conf file to read the following: userdb static { # Template for settings. Can return anything a userdb could normally # return, eg.: uid, gid, home, mail, nice # # A few examples: # # args = uid=500 gid=500 home=/var/mail/%u # args = uid=500 gid=500 home=/home/%u mail=mbox:/home/%u/mail nice=10 # #args = # dovecot virtual users auth_userdb = static uid=1003 gid=1003 home=/home/dovecot/users/%u auth_passdb = passwd-file /home/dovecot/passwd auth_user = dovecot ) However, dovecot complains: Error: Error in configuration file /usr/local/etc/dovecot.conf line 752: Unknown setting: auth_userdb Where did I go wrong? I hope someone can help me. Thanks! Warm regards from Poland, Zbyszek

1 0

[Dovecot] Strange log entry???
by Bill Landry 06 Sep '06

06 Sep '06

Although everything appears to be working fine, I see the following entry in my log file each time someone logs on via the IMAPS service (all other services are disables: POP, IMAP, etc.): ========== Sep 6 02:57:00 mgw1 dovecot: Logins with login process UID xxxx (user someone(a)example.com) not permitted (see login_user in config file). ========== Any idea what this log entry means and is there a config setting I need to adjust to stop these log entries (Dovecot version 1.0.rc7)? Thanks, Bill

2 1

[Dovecot] dovecot-sieve with FreeBSD
by Peter Bauer 06 Sep '06

06 Sep '06

Hello, I've a test system with postfix (SMTP), dovecot (IMAP only) and covecot-LDA (MDA) under FreeBSD-6.1. Currently everything works fine. But I wasn't able to install dovecot-sieve from the CVS. Does anyone has a small documentation howto install dovecot-sieve on FreeBSD. Thanks. -- Der GMX SmartSurfer hilft bis zu 70% Ihrer Onlinekosten zu sparen! Ideal für Modem und ISDN: http://www.gmx.net/de/go/smartsurfer

4 5

[Dovecot] Dovecot problem in RHEL4
by ~adarsh~ 06 Sep '06

06 Sep '06

Hi all, I have some problem with dovecot in RHEL4. IMAP server is dropping connection after woorking for some time. It seems that the login process count keeps increasing?(stale login process are not removed) Any points to sort the problem? -- Adarsh

2 2

[Dovecot] configuration guidelines.
by Ian Mortimer 05 Sep '06

05 Sep '06

Our imap/pop service is moving from UW imap to dovecot 0.99.11 on RHEL4. This is for around 200 users with lots of different email clients, e.g.: Windows: outlook, outlook Express, eudora, thunderbird, netscape OS X: mail, eudora, thunderbird Unix/Linux: evolution, thunderbird, pine, mutt Web: squirrelmail Apart from the example configuration file, I can't find any guides for optimal values to use for dovecot's many configuration options. A few that look like they might need changing are: login_process_size = 32 login_process_per_connection = yes login_processes_count = 3 mbox_dotlock_change_timeout = 30 auth_count = 1 client_workarounds = Does anyone have any pointers to reasonable values for those or other settings? Thanks -- Ian

3 3

Re: [Dovecot] rc7 bug? [Was: deliver LDA and INBOX location] (fwd)
by David Lee 05 Sep '06

05 Sep '06

Anyone had any thoughts on the item below? If the problem is with my config, I'd like to be guided towards how I might resolve it. If it is a bug in rc7, it would be good to fix it, and I'd be happy to beta-test. -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : Durham University : : http://www.dur.ac.uk/t.d.lee/ South Road : : Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. : ---------- Forwarded message ---------- Date: Fri, 1 Sep 2006 10:22:20 +0100 (BST) From: David Lee <t.d.lee(a)durham.ac.uk> To: dovecot(a)dovecot.org Subject: Re: [Dovecot] rc7 bug? [Was: deliver LDA and INBOX location] On Thu, 31 Aug 2006, David Lee wrote: > [...] > We have a well-established different convention which subdivides this, > based on the last two digits of the uid: "/var/spool/mail/12/fred" (for > fred's uid as something ending "[...]12"). This is working nicely with > dovecot, using the new rc7 functionality: > default_mail_env = mbox:%h:INBOX=/var/spool/mail/%-2.02i/%u:[...] > > I am now trying to get sendmail to use dovecot's "deliver" as the LDA, > [...] The main problem is that, according to the log file, the delivery > attempt is being made to an INBOX "/var/spool/mail//fred". That is, it > seems to be ignoring the "default_mail_env" setting. > > Have I missed something in the wiki, or is this a bug of some sort? I have looked deeper at my problem (abov). It seems to be a bug in rc7, and probably an "always been there" bug. I sprinked a few "i_info(...)" diagnostics into "deliver.c" where it does 'getenv("MAIL")' and 'getenv("DEFAULT_MAIL_ENV")'. It shows that these are being successfully read from the 'dovecot.conf' file (good). But, crucially, it seems that the "%" variable substitution is incomplete: line 483: MAIL [null] line 486: MAIL mbox:%h:INBOX=/var/spool/mail/%-2.02i/%u:INDEX=/var/spool/mail/indexes/%d/%n line 492: MAIL mbox:/home/fred:INBOX=/var/spool/mail//fred:INDEX=/var/spool/mail/indexes//fred (Aside: The act of inserting the 'i_info' will have knocked the line numbers adrift by a couple. But it shows what is (not) happening.) Note in the "INBOX=..." clause that while "%u" and "%h" have been successfully expanded (good), the "%i" variant (UNIX uid) has failed to get expanded (bad). I'm new to dovecot, so am on a steep learning curve and am unfamiliar with the source code and dovecot's principles. So it would probably take me ages to work out a suitable patch, and even then it might be inappropriate. But hopefully the above information is sufficient and suitable for someone (Timo?) to investigate more expertly and fully. If someone can produce a patch (or hints of what to patch and where) I would certainly intend to test it and work on it for you. Hope that helps. Many thanks in advance. -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : Durham University : : http://www.dur.ac.uk/t.d.lee/ South Road : : Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. :

2 3

[Dovecot] Effective UIDs Nad GID for VIrtual Users
by rammstein-den 05 Sep '06

05 Sep '06

Hello to All. I have a system with FreeBSD 6.1 Release, Dovecot 1.0 Release Candidate 7. I am a novice user in unix world and when my first deal with with Dovecot is Virtual users. User databes in master.passwd file (like a /etc/master.passwd) created by "pw". All works fine, BUT --- If user exclusivly virtual (there is no user with same name in system) IMAP folders are created normal with a right access rights(they described in dovecot.conf statically UID 555) - all cool - BUT when i trying to login with a Virtual user with the SAME LOGIN NAME as in SYSTEM (FreeBSD's /etc/master.passwd user) USER ---- going something strange: imap folders that creating for this user takig wrong ACCES RIGHTS (access rights for system user), not statically with UID 555! What the ... ?! -----------------------Edited Part of Dovecot.conf----------------------------------------------------- default_mail_env = mbox:/var/new/%u:INBOX=/var/virtual/%u auth default { # Space separated list of wanted authentication mechanisms: # plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi #mechanisms = digest-md5 # /etc/passwd or similar, using getpwnam() # In many systems nowadays this uses Name Service Switch, which is # configured in /etc/nsswitch.conf. # passdb passwd { # } #auth_user=root #userdb passwd-file { # args = /bsd/dove/passwd #} userdb passwd { args = /bsd/dove/passwd } passdb passwd-file { args = /bsd/dove/master.passwd } # /etc/passwd or similar, using getpwnam() # In many systems nowadays this uses Name Service Switch, which is # configured in /etc/nsswitch.conf. # static settings generated from template userdb static { # Template for settings. Can return anything a userdb could normally # return, eg.: uid, gid, home, mail, nice # # A few examples: # # args = uid=500 gid=500 home=/var/mail/%u # args = uid=500 gid=500 home=/home/%u mail=mbox:/home/%u/mail nice=10 # args = uid=555 gid=125 } } ------------------------------------END------------------------------------- In logs I also have: dovecot: Sep 04 22:47:03 Info: IMAP(radeon): Effective uid=1001, gid=1001 instead dovecot: Sep 04 22:59:39 Info: IMAP( ): Effective uid=555, gid=125 - - - - -- - -- - - I so angry! P.S. Sorry for my english,my native language is Russian :)

1 0

[Dovecot] Upgrading from Package on OpenBSD
by Michael Starks 05 Sep '06

05 Sep '06

Hi, First, let me say I looked for a way to search the archives online but must be missing something. Can someone point me to a URL? On to the question: I'm currently running dovecot-0.99.14p1 from packages on OpenBSD 3.8. I'm interested in running the latest version. What is the best practice for migrating/upgrading on OpenBSD? Thanks in advance.

2 1

[Dovecot] Maildir messages owned by Root.
by Simon 05 Sep '06

05 Sep '06

G'day I am having an interesting issue, that I can not find a fixe for. I am running dovecot 1.0 rc7, on a Freebsd 5.4 x86 box, with around 1500ish users, using Maildir storage format. I have a very small number of user, with the same problem, when messages are moved from ~username/Maildir/new to ~username/Maildir/cur a random number, of the files ownership, will change to root. And my users can then not download any mail until this has been fixed. I have an identical setup running on Solaris 10 x86, that does not have this problem. Has anybody come across this before on Freebsd or any other operating system. Or have any suggestions, on what I can try to fix the problem. I have not been able to emulate it in a lab environment, and the logs on the server do not produce an error.

1 0

[Dovecot] OT: NIS Authentication
by Jeff Graves 04 Sep '06

04 Sep '06

Ran into a major issue with my setup overnight: We have a Win2K AD domain running SFU with a master and 1 slave NIS server. Our mail server is a FC1 box that runs dovecot and a MailScanner/sendmail config. The mail server is configured as a NIS client. The problem is that we lost power overnight and all of the boxes shutdown after the UPS's ran out of battery. After the power came back on, all of the boxes automatically rebooted. The problem is that our mail server is somewhat faster than the rest of the servers. It booted up before the master or slave NIS servers were up and running. Since the mail server uses a PAM NIS authentication scheme, it knows nothing about our users unless it connects to a NIS server. So, this morning users were getting "unknown username" type errors with outlook. Furthermore, the mail logs show that sendmail was rejecting mail with "unknown user" errors. It wasn't until we rebooted the mail server and it was able to reconnect to the NIS servers that mail resumed being received and users could access it. It seems like a fundamental problem with our setup. Since I'll eventually be updating the box to a newer OS and configuration, I need to plug this hole somehow without changing the authentication scheme. Furthermore, I'm concerned that if the master or slave went down while the mail server was still up, we'd see similar results. I'm thinking of one of two options to fix this but wanted to run it by everyone to see if there was a better way: 1) Configure the boot loader to wait 5 minutes before loading the OS (it uses GRUB so I'll set it display the OS menu screen for 5 minutes and then boot). Then if I'm doing maintenance to the box I can just hit enter to boot immediately and hopefully the 5 minute delay will allow the other boxes to boot after a power outage. This won't cover me if it's not a power outage (Eg. The master or slave dies). 2) Configure the mail server as an NIS slave. I'm thinking that this will basically "copy" the user info (username, password, homedir, etc.) on a schedule and store it locally on the mail server (is this how it works?). This covers both issues - power outage and a server dying. But I've read about problems getting password sync to happen quickly. I'd ideally like it to happen immediately (without any manual intervention) but I don't think this is possible. Thoughts? Jeff Graves, MCSA Customer Support Engineer Image Source, Inc. 10 Mill Street Bellingham, MA 02019 508.966.5200 - Phone 508.966.5170 - Fax jeff(a)image-src.com - Email www.image-src.com

5 4

[Dovecot] Can't build with PAM support
by Neil Briscoe 04 Sep '06

04 Sep '06

I'm having trouble getting dovecot to compile with PAM support. Output from the configure command says its checking for pam_start in -lpam .... no. I've checked, there is a pam_start in there. So how can I force configure to see what its looking for? I've tried the --with-pam switch and that doesn't work. I'm trying to build the latest RC7 on a Debian Sarge box. Regards Neil ------------------------------------------------------------------------------------ Scanned for viruses, spam and offensive content by CensorNet MailSafe Professional Web & E-mail Filtering from www.censornet.com

2 5

[Dovecot] Emails corrupted...
by Jean-François Guyet 04 Sep '06

04 Sep '06

Hi All, I have just setup a Dovecot Imap server on a Ubuntu 6.06 Lamp box. Basically I use fetchmail to retrieve emails from foregin pop accounts and then procmail transfers emails for /var/mail/username to ~/Maildir/new and other folders. Everything works fine *except* if my Thunderbird client is connected (I haven't tried any other client). If an email is received while TB is connected, then the file for the email is empty (eg size 0) leading to an empty email dated 1/jan/1970!. As I'm quite to Dovecot (and Linux in general), I'm quite a bit lost. Anyone there who could help ? Best regards Jean-François -- ----- Fin du message transféré ----- --

2 1

[Dovecot] Mailbox Limnits
by Chris Kenward 04 Sep '06

04 Sep '06

Hi Folks Can anyone tell me whether there is a default limit on the size of IMAP mailboxes using Dovecot or, if not, where I would set that up? We're wanting to give our customers the choice of IMAP vs POP but don't want to end up with Gigabyte mailboxes. Regards Chris

1 0

[Dovecot] SPA (NTLM) Authentication
by Neil Briscoe 03 Sep '06

03 Sep '06

Hello I have just spent a happy day (!) configuring Exim4 to accept authenticated connections from full blown Outlook clients. That works. Unfortunately, by ticking the "Use SPA" box in Outlook it now demands SPA on the POP3 server as well. The existing POP3 server doesn't support this style of authentication. I believe Dovecot will. We're already using it as an IMAP server. What I'm worried about is diverting its current view from /etc/passwd. I have an /etc/exim4/passwd file which contains three fields for the users tested so far, their name, an encrypted password, and a clear text one. Timo has already told me that the system needs access to the cleartext password (or an NTLM style password) in order to work. It would be nice if I could have the system check the /etc/exim4/passwd file and if the user wasn't there then check the /etc/passwd file - and ignore NTLM as it would normally. Regards Neil -- Neil Briscoe Adelix Ltd neil.briscoe(a)adelix.com web: www.adelix.com tel: 0845 230 9592 / fax: 0845 230 9591 / main office: 0845 230 9590 snail: The Old Post Office, Bristol Rd, Hambrook, Bristol BS16 1RY. UK. skype: stonefish001 Adelix Ltd is BS EN ISO 9001:2000 Certified (No. GB 12763) Any views expressed in this email communication are those of the individual sender, except where the sender specifically states them to be the views of a member of Adelix Ltd. Adelix Ltd. does not represent, warrant or guarantee that the integrity of this communication has been maintained nor that the communication is free of errors or interference. ------------------------------------------------------------------------------------ Scanned for viruses, spam and offensive content by CensorNet MailSafe Professional Web & E-mail Filtering from www.censornet.com

1 1

[Dovecot] Dovecot with STARTTLS
by Dovecot Mailing List 03 Sep '06

03 Sep '06

Dovecot rc7 I have Dovecot working fine with using SSL on port 995. However, if I attempt to use STARTTLS on port 110, I receive the following error message from my MUA: >>> Connecting to "192.168.0.2" (SSL/TLS) [9/1/2006 5:36:12 PM] <<< +OK Seibercom.net at your service [ISafe POP3 Proxy] STLS +OK Begin TLS negotiation now. The connection then times out. This is the only entry in the Dovecot.log: dovecot: Sep 01 17:36:52 Info: pop3-login: Disconnected: Inactivity: rip=192.168.0.4, lip=192.168.0.2, TLS handshake Does anyone have an idea what the problem might be? Thanks! -- Gerard Seibert gerard(a)seibercom.net

6 9

[Dovecot] imap fails, policy wrong?
by rob＠adeed.tele.com 02 Sep '06

02 Sep '06

up until a week or so ago, I had no problem using IMAP logging into a server running Fedora Core (I think 4 or 5 ) with dovecot 1.0. Had used squirrelmail and other mail agents using IMAP with no problem. as of 2 days ago, I get a squirrelmail error "ERROR: Connection dropped by IMAP server. Query: CAPABILITY" and turning on dovecot debugging shows the following: audit(1157176740.621:14111): avc: denied { search } for pid=9431 comm="doveco t" name="rob" dev=dm-0 ino=23560377 scontext=user_u:system_r:dovecot_t:s0 tconte xt=user_u:object_r:httpd_sys_content_t:s0 tclass=dir can someone point me in the right direction? apologies if this doesn't contain enough info, will try to get more if necesssary, thanks in advance. (incidentally, the simpler dovecot error message says it can't chdir to my $HOME or its parent, but I see no problem with perms or ownership. ) Rob Lingelbach rob(a)colorist.org

2 1

[Dovecot] Passwd-file extra-fields ...which ones
by Luis Venegas 01 Sep '06

01 Sep '06

Hi list., >From http://wiki.dovecot.org/AuthDatabase/PasswdFile I can tell there is mail and allow_nets fields. Which ones dovecot supports? In particular one for quota?? Thanks Luis Venegas

1 0

[Dovecot] DIGEST-MD5 doesn't work
by Jürgen Herz 01 Sep '06

01 Sep '06

Hi, my dovecot installation works since months and clients authenticate using CRAM-MD5. But today I got the first chance to test an client that supports DIGEST-MD5 - and it doesn't work. Because of lack of other supporting clients and servers I'm now at the point I don't know which side is to blame. The error I get after the client answers the servers challenge is "-ERR Authentication failed: Missing nonce parameter". Though I don't know how DIGEST-MD5 works I wonder about the message because the clients answer contains a nonce parameter (captured with tcpdump): YXV0aHppZD0ib3RycyIsY2hhcnNldD11dGYtOCxjbm9uY2U9IjFlOTZkYmZiZWEwZjUxNmVhZjEyYmM0NjU1M2JmZjVlIixkaWdlc3QtdXJpPSJwb3AzL25hbm8iLG5jPTAwMDAwMDAxLG5vbmNlPSJPVGpGWmhjS2FIVjZSVGMyZlRDTXJ3PT0iLHFvcD1hdXRoLHJlYWxtPSIiLHJlc3BvbnNlPTVmMTQyZWVlN2FmMWVmYTJhYWI5ZmM0ODNiOGJjOTJhLHVzZXJuYW1lPSJvdHJzIg== authzid="otrs",charset=utf-8,cnonce="1e96dbfbea0f516eaf12bc46553bff5e", digest-uri="pop3/nano",nc=00000001,nonce="OTjFZhcKaHV6RTc2fTCMrw==", qop=auth,realm="",response=5f142eee7af1efa2aab9fc483b8bc92a,username="otrs" Client is a Perl script using Net::POP3 and Authen::SASL Modules Dovecot is version 0.99.14 - I know it's old and not supported. If one tells me the bug is known and fixed in 1.0rc, then I'll think about upgrading, but I just to test I don't want to change my running system. Regards, Jürgen

1 1

[Dovecot] Stale imap processes
by Michael Bond 01 Sep '06

01 Sep '06

I read through the thread on Stale imap process and would like to chime in that I too am having the problem. The only imap user on the system is using Mail.app 2.1. The other users are using pop with thunderbird. After quiting mail.app and stopping dovecot I can still see many imap sessions opened. Over the course of the day a good number of imap process will be open and no one will be able to connect to the server via imap or pop. Typically I have to restart dovecot twice a day with the following: /etc/init.d/dovecot stop killall imap /etc/init.d/dovecot start I've narrowed it down to an imap issue. If i don't connect with imap the other users don't report any issues connecting with pop. I'm using mbox as my mail format on centos 4. I know that the default version on centos4 is .99, but it appears that people are still having issues into 1.0rc2. Could it have something to do with using mbox format? Mike. mbond(a)the-forgotten.org

1 0

[Dovecot] deliver LDA and INBOX location
by David Lee 01 Sep '06

01 Sep '06

(OS: Fedora Core 5; dovecot: 1.0 rc7) On a typical UNIX-like OS, the INBOXes are in "/var/spool/mail/" using the user identifier: so user 'fred' has INBOX "/var/spool/mail/fred". We have a well-established different convention which subdivides this, based on the last two digits of the uid: "/var/spool/mail/12/fred" (for fred's uid as something ending "[...]12"). This is working nicely with dovecot, using the new rc7 functionality: default_mail_env = mbox:%h:INBOX=/var/spool/mail/%-2.02i/%u:[...] I am now trying to get sendmail to use dovecot's "deliver" as the LDA, (following "http://wiki.dovecot.org/LDA") as a simple drop-in replacement for the normal LDA. (Actually our migration starting point is a UW-IMAP background using its 'tmail' as LDA.) 1. It seems that using "auth default {...socket listen {...}...}" is mandatory. Can someone confirm? This feels like an extra complication: is it strictly necessary in a NIS/PAM set-up? (Fair enough if so.) 2. The main problem is that, according to the log file, the delivery attempt is being made to an INBOX "/var/spool/mail//fred". That is, it seems to be ignoring the "default_mail_env" setting. Have I missed something in the wiki, or is this a bug of some sort? -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : Durham University : : http://www.dur.ac.uk/t.d.lee/ South Road : : Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. :

1 1

[Dovecot] No tcp wrappers, other ideas to help stop brute force attacks?
by David Rees 01 Sep '06

01 Sep '06

I'm looking for a way to deny access to dovecot from certain IP addresses, basically to help prevent brute force attacks on the server. Right now I'm using denyhosts which scans /var/log/secure for authentication failures which then can add an entry to /etc/hosts.deny, but since dovecot doesn't have tcp wrappers support, that doesn't do anything. It doesn't look like I can run dovecot run xinetd. Any other ideas to help protect dovecot from brute force attacks? I don't think pam can help, can it? Otherwise I need to figure out a way to have denyhosts trigger iptables rules or something, or maybe there's another application that will work? -Dave

9 15

[Dovecot] one example, just one example ...
by OpenMacNews 01 Sep '06

01 Sep '06

... of a correctly formatted QUOTA spec in/for a static userdb. That's all I'm askin' for! i've tried a bunch of variants. the most recent two: user@domain.com:{PLAIN}testpass:::::: quota=maildir:storage=4096 user@domain.com:{PLAIN}testpass:::::: maildir:storage=4096 *none* (so far ...) work to override the spec in dovecot.conf. no errors in the logs; rather, simply: dovecot: Aug 31 08:54:25 Info: auth(default): passwd-file /var/MailServer/Data/USERS/imap_user_file: Read 2 users nobody? really, nobody does this successfully? richard

2 2

[Dovecot] [Fwd: dovecot-1.0_rc7 crashes (Login process died too early) with repeated deletes from thunderbird]
by Tim Schafer 01 Sep '06

01 Sep '06

I've run this test on every permutation of poll and notify: can NOT reproduce the crash: --with-ioloop=select --with-notify=none --with-ioloop=select --with-notify=dnotify --with-ioloop=select --with-notify=inotify --with-ioloop=poll --with-notify=none --with-ioloop=poll --with-notify=dnotify --with-ioloop=poll --with-notify=inotify CAN reproduce the crash: --with-ioloop=epoll --with-notify=none --with-ioloop=epoll --with-notify=dnotify --with-ioloop=epoll --with-notify=inotify So it would seem that epoll is related some how. As IDLE only seems to work well with epoll, I'm highly interested in resolving this crash. My Linux kernel is version 2.6.14.2 glibc 2.3.6 If any other info would help, please let me know. If any other test combinations would be helpful, I will try to do them ASAP. Regards, Tim Schafer -------- Original Message -------- Subject: [Dovecot] dovecot-1.0_rc7 crashes (Login process died too early) with repeated deletes from thunderbird Date: Thu, 24 Aug 2006 15:18:56 -0700 From: Tim Schafer <tim_schafer(a)shipfsp.com> To: Dovecot Mailing List <dovecot(a)dovecot.org> I can consistently reproduce a crash in dovecot: Select 20 or more messages and copy them to a test folder. Go into that test folder and SHIFT-DEL the messages rapidly (holding down SHIFT-DEL works best) Just rapidly DELing them (even holding down DEL) doesn't do it (unless it's the Trash folder) I'm using the following namespace (in case that's relevant) namespace private { separator = . prefix = INBOX. inbox = yes } The /var/log/syslog for the session reads: Aug 24 14:58:54 hostname dovecot: Dovecot v1.0.rc7 starting up Aug 24 14:58:55 hostname slapd[7243]: conn=147 fd=9 ACCEPT from IP=127.0.0.1:41074 (IP=0.0.0.0:389) Aug 24 14:58:55 hostname slapd[7243]: conn=147 op=0 BIND dn="" method=128 Aug 24 14:58:55 hostname slapd[7243]: conn=147 op=0 RESULT tag=97 err=0 text= Aug 24 14:59:09 hostname dovecot: auth(default): client in: AUTH^I1^IPLAIN^Iservice=IMAP^Ilip=192.168.0.7^Irip=192.168.0.100 Aug 24 14:59:09 hostname dovecot: auth(default): client out: CONT^I1^I Aug 24 14:59:09 hostname dovecot: auth(default): client in: CONT^I1^IAHRdfmkerjejfkdeie Aug 24 14:59:09 hostname dovecot: auth(default): client out: OK^I1^Iuser=username Aug 24 14:59:09 hostname dovecot: auth(default): master in: REQUEST^I1^I10081^I1 Aug 24 14:59:09 hostname dovecot: auth(default): master out: USER^I1^Iusername^Isystem_user=username^Iuid=1000^Igid=100^Ihome=/home/username Aug 24 14:59:09 hostname dovecot: imap-login: Login: user=<username>, method=plain, rip=192.168.0.100, lip=192.168.0.7 Aug 24 14:59:10 hostname dovecot: auth(default): client in: AUTH^I1^IPLAIN^Iservice=IMAP^Ilip=192.168.0.7^Irip=192.168.0.100 Aug 24 14:59:10 hostname dovecot: auth(default): client out: CONT^I1^I Aug 24 14:59:10 hostname dovecot: auth(default): client in: CONT^I1^IAHRdfmkerjejfkdeie Aug 24 14:59:10 hostname dovecot: auth(default): client out: OK^I1^Iuser=username Aug 24 14:59:10 hostname dovecot: auth(default): master in: REQUEST^I2^I10082^I1 Aug 24 14:59:10 hostname dovecot: auth(default): master out: USER^I2^Iusername^Isystem_user=username^Iuid=1000^Igid=100^Ihome=/home/username Aug 24 14:59:10 hostname dovecot: imap-login: Login: user=<username>, method=plain, rip=192.168.0.100, lip=192.168.0.7 Aug 24 14:59:12 hostname dovecot: auth(default): client in: AUTH^I1^IPLAIN^Iservice=IMAP^Ilip=192.168.0.7^Irip=192.168.0.100 Aug 24 14:59:12 hostname dovecot: auth(default): client out: CONT^I1^I Aug 24 14:59:12 hostname dovecot: auth(default): client in: CONT^I1^IAHRdfmkerjejfkdeie Aug 24 14:59:12 hostname dovecot: auth(default): client out: OK^I1^Iuser=username Aug 24 14:59:12 hostname dovecot: auth(default): master in: REQUEST^I3^I10085^I1 Aug 24 14:59:12 hostname dovecot: auth(default): master out: USER^I3^Iusername^Isystem_user=username^Iuid=1000^Igid=100^Ihome=/home/username Aug 24 14:59:12 hostname dovecot: imap-login: Login: user=<username>, method=plain, rip=192.168.0.100, lip=192.168.0.7 Aug 24 14:59:14 hostname dovecot: IMAP(username): Disconnected Aug 24 14:59:14 hostname dovecot: imap-login: Disconnected: rip=192.168.0.100, lip=192.168.0.7 Aug 24 14:59:14 hostname last message repeated 2 times Aug 24 14:59:14 hostname dovecot: Login process died too early - shutting down Aug 24 14:59:14 hostname dovecot: imap-login: Disconnected: rip=192.168.0.100, lip=192.168.0.7 Aug 24 14:59:14 hostname slapd[7243]: conn=147 op=1 UNBIND Aug 24 14:59:14 hostname slapd[7243]: conn=147 fd=9 closed -- Regards, Tim Schafer

1 1

[Dovecot] MANAGESIEVE patch v2
by Stephan Bosch 01 Sep '06

01 Sep '06

Hello Timo, Dispite the heat out here, I managed to come up with a new version of the managesieve patch for dovecot-1.0rc2: - Fixed the bug (missing CRLF) in the authenticate command - Modified the sieve storage library making the interface much less crude. - The scripts put on the server using the putscript command are now checked before they are accepted. - The reported SIEVE capability is now directly read from the sieve implementation (in this case cmu), listing much more than "FILEINTO VACATION". - Fixed some minor bugs in the putscript command Considering the dovecot-sieve plugin, I noticed that you obviously do not want to include the cmu sieve code in the main dovecot source tree. Unfortunately I did not see any other way but to include this library in my patch to make it support checking the uploaded scripts (for now). There are a few alternatives to solve this issue. We could combine de dovecot-sieve plugin with the managesieve patch yielding a single large sieve plugin. However, this would require some means to let the master know about the new managesieve process type. This could be achieved with some more plugin magic. Another way to solve this problem is by truly only excluding the cmu source from the main dovecot tree. If the interface of the sieve implementation is abstracted somehow, one could build a plugin interface for sieve implementations. This sieve interface would be common to dovecot-deliver and the managesieve daemon. This way, it does not matter how the sieve language is implemented (dovecot could even implement its own and still support cmu and others). I saw a hint to this solution in your original dovecot-lda plugin (i.e. sieve-mailutils.c etc), so you must have been playing with this idea as well. I took the liberty to define an example interface for the sieve implementations in the src/lib-sieve directory. It was concieved very quickly and it is far from complete, but it should support the current features of the delivery process. It is only tested for the managesieve putscript verification (no script was ever run though this interface). I am also not quite happy with the error reporting scheme of this interface. This needs more work and if you don't like it you can of course discard it entirely and define your own. Currently, I am also testing other sieve implementations. I am experimenting with libsieve2 (libsieve.sourceforge.net) and with building a wrapper around 'exim -bf'. This last solution is of course not useful for dovecot-lda, but I think the managesieve daemon is not only useful for dovecot itself. Support for these implementations is not yet included in this patch. The patch can be downloaded at: http://sinas.rename-it.nl/~sirius/dovecot-1.0.rc2-MANAGESIEVE-v2.diff.gz (Simply apply it (-p0) to a clean 1.0rc2 source tree and run autogen.sh etc.) For testing, I have tried other client implementations than horde-ingo, but somehow everyone is very focused on the timsieve daemon and they tend to require its protocol specifics. The only other implementation I got working is smartsieve. The others either crashed or produced protocol errors (i.e. sieveshell). I hope I can get more client implementations to work to ensure the incompatibilies are not my fault. I am very eager to know what you think about the sieve implementation ideas and what you think of the new managesieve patch. Regards, -- Stephan Bosch stephan(a)rename-it.nl

2 1

[Dovecot] rc >= 6, libtool and zsh
by Thomas Hummel 31 Aug '06

31 Aug '06

Hello Timo, On FreeBSD 6.1-STABLE, rc7 doesn't build (rc6 didn't either) because of a broken "sed" in the genarated "libtool" script, at least with the "zsh" shell comming from the ports (zsh-4.3.2). This has occured starting from your move from Autoconf 2.59 to Autoconf 2.60 since for some reason, now "libtool" is run by zsh (instead of sh as in 2.59). I didn't investigate if it comes from : . "me/FreeBSD" : my particular version of zsh, or some patch that may be included in the port . "you" : changes in config.in, some problems in autotools you are using . "Debian" : the 1.5.22 Debian 1.5.22-4 patches of "ltmain.sh" used . "Libtool" : maybe some strange interaction with zsh . "Autoconf" : maybe some bug with the libtool script generation by configure . or some other reason At least, it works if I force CONFIG_SHELL to be /bin/sh -- Thomas Hummel | Institut Pasteur <hummel(a)pasteur.fr> | Pôle informatique - systèmes et réseau

1 0

[Dovecot] Dovecot as LDA with Postfix
by Gerard Seibert 31 Aug '06

31 Aug '06

I have been attempting to replace Procmail with Dovecot as the LDA for my Postfix mail server, but without success. Below is a truncated output from the /var/log/maillog. Aug 9 11:56:20 scorpio postfix/local[4338]: 88C3FC3D1: to=<gerard(a)localhost.seibercom.net>, orig_to=<gerard@localhost>, relay=local, delay=1119, delays=1118/0.71/0/0.11, dsn=4.3.0, status=deferred (temporary failure) Aug 9 11:56:20 scorpio postfix/local[4324]: 818AEBF6F: to=<gerard-gmail(a)localhost.seibercom.net>, orig_to=<gerard-gmail@localhost>, relay=local, delay=495, delays=494/0.06/0/0.81, dsn=4.3.0, status=deferred (temporary failure) Aug 9 11:57:37 scorpio postfix/postfix-script: stopping the Postfix mail system Aug 9 11:57:37 scorpio postfix/master[4233]: terminating on signal 15 Aug 9 12:00:09 scorpio postfix/postfix-script: starting the Postfix mail system Aug 9 12:00:09 scorpio postfix/master[4501]: daemon started -- version 2.4-2000727, configuration /usr/local/etc/postfix Aug 9 12:00:28 scorpio postfix/smtpd[4522]: connect from localhost[127.0.0.1] Aug 9 12:00:28 scorpio postfix/smtpd[4522]: A269EC46D: client=localhost[127.0.0.1] Aug 9 12:00:28 scorpio postfix/cleanup[4526]: A269EC46D: message-id=<44DA0115.40500(a)dlr.de> Aug 9 12:00:28 scorpio postfix/qmgr[4503]: A269EC46D: from=<samba-bounces+gerard=seibercom.net(a)lists.samba.org>, size=7308, nrcpt=1 (queue active) Aug 9 12:00:29 scorpio postfix/local[4527]: A269EC46D: to=<gerard(a)localhost.seibercom.net>, orig_to=<gerard@localhost>, relay=local, delay=0.58, delays=0.2/0.06/0/0.33, dsn=2.0.0, status=sent (delivered to command: /usr/local/bin/procmail) Aug 9 12:00:29 scorpio postfix/qmgr[4503]: A269EC46D: removed With Dovecot as the LDA, no mail is ever delivered. I keep getting this temporary failure message. As soon as I revert to Procmail everything works fine. I am simply trying to deliver to mbox format on a FreeBSD 6.1 STABLE system. Nothing exotic. I am using SASL2. Authentication is via saslauthd -a sasldb. Perhaps I do not have that configured correctly in Dovecot. Dovecot does work fine as a POP server though, so it is running at least partially correctly. I would appreciate any assistance. -- Gerard Seibert gerard(a)seibercom.net Democracy is a device that insures we shall be governed no better than we deserve. George Bernard Shaw

5 13

[Dovecot] RC7: its issues or mine?
by David Lee 31 Aug '06

31 Aug '06

Background: I'm new to dovecot (although with many years Washington IMAP behind me). We're considering migrating from Washington IMAP to dovecot on the main service here, and have just started trying dovecot, using RC7. Washington, IMAP has the usual(-ish) "/var/spool/mail" shared area for the INBOX (trad. UNIX "From " format); a user's folders default to being in their home directory (same format). We are looking towards a "minimal effort" migration to dovecot, so wish to keep this layout. (In an ideal world, we would re-think, including "maildir" etc. But that's not an option at the moment.) I have encountered three issues (so far); I'm not sure whether their mine or something in dovecot (if the latter, whether bugs or features; whether RC7-specific issues; etc.). 1. The overall description of "default_mail_env" seems inadequate (in the conf file, "doc/variables.txt" and "doc/mail-storages.txt"). I'm trying: default_mail_env = mbox:~:INBOX=/var/spool/mail/%-2.02i/%u:INDEX=/tmp/indexes/%d/%n and that seems OK-ish. (The extra "%-2.02i" is because we subdivide the otherwise huge "/var/spool/mail/" directory using the user's uid-mod-100.) But the mere act of an IMAP "login" commands creates a directory (empty) with the liternal name of ~ (tilde). (An IMAP 'list "Mail" "*"' command successfully finds the usr folders in the 'Mail' subdirectory of the user's home directory.) It's almost as if the 'default_mail_env' is telling it to create (literal) '~' before realising that this is shorthand (as in C-shell) for home directory. 2. We have some Pine usage in our UNIX cluster. Historically this has taken advantage of the Pine "rsh mailmachine /etc/rimapd" ability to avoid the need for the password: pre-authentication etc. (Yes, we realise that 'rsh' has security issues.) But when I try making symlink "/etc/rimapd" point to "/usr/dovecot/sbin/dovecot" this fails: Error: Can't use SSL key file /etc/ssl/private/dovecot.pem: Permission denied We have: /etc/ssl/certs/dovecot.pem (mode 444) /etc/ssl/private/dovecot.pem (mode 400) for the sake of secure-IMAP (port 993). But why does this come into the equation at all for this (none-SSL) "rsh ... /etc/rimapd" usage? 3. I was developing and testing this here at work using an account that I mostly use from home using Outlook Express. I was very careful (I think!) only to use the read-only "examine INBOX" command (not "select INBOX"). When I went home and tried it as usual (connecting to our production Washington IMAP service reading that INBOX). But OE showed all the email (including previously read) as "unread" (closed envelope icon). It seems that dovecot has done something to the message headers (even under "examine") that has worried OE. Any thoughts? Finally any hints for NFS-based working? We have a farm of a few Fedora machines running the IMAP processes and the sendmail locally-delivery. Our current "/etc/fstab" NFS spec. for the INBOX area (on a NetApp) is: rw,noac,actimeo=0,vers=3,tcp,timeo=600,rsize=32768,wsize=32768,hard,intr,fg,nosuid Any changes? Issues? Thinks to consider? Etc. Many thanks. -- : David Lee I.T. Service : : Senior Systems Programmer Computer Centre : : Durham University : : http://www.dur.ac.uk/t.d.lee/ South Road : : Durham DH1 3LE : : Phone: +44 191 334 2752 U.K. :

5 8

[Dovecot] IMAPS + Outlook
by Mark Adams 31 Aug '06

31 Aug '06

Hi, We have been using Dovecot 1.0 to serve Maildir format over IMAPs to a client with an office of around 30 people, and a remote office of 10, all using Outlook 2003. While users in the base office (location of server) are not having issues with the server users in the remote office are often having problems with Outlook freezing, or not being able to connect. The dovecot log shows them logging in, but users report not being able to open any mail. We are having similar problems with 2 users that are often on 3G cards, in that the headers download but when they try to open the file it gives the 'must be online to download the message' error, even though they are still connected to their 3G. The net connection for the server is 2mb sdsl, which I have tested myself (using thunderbird on linux!) and achieved good throughput and reliable mailbox navigation. Is there any Outlook work arounds we could be using? (currently using idle timeout work around) Any help is very much appreciated. Thanks, Mark

5 5

[Dovecot] dovecot with Calendar or Contacts?
by ajmcello 31 Aug '06

31 Aug '06

I have the SyncKolab plugin installed with Thunderbird. I can't get it to work properly. Maybe I have to have a Kolab Server? I can get my Address Book contacts to sync with an IMAP folder when I check Sync IMAP, but I can't get it to work the other way around. From their website, it seems possible: [begin paste] SyncKolab SyncKolab was written to add kolab functionality to thunderbird. It reads a selected Imap folder and synchronizes it with the local address book and calendar. It has been tested under Thunderbird 1 for Windows and Linux. What is Kolab? What it does is, that it loads all your contacts (from a selected address book) as well as events and todos (from the selected calendar), and synchronizes them with a selected imap folder. Where every contact is stored as an vcard and every event,todo as iCalendar. For more information http://kolab.org/ The idea behind this is, that you can now have your contacts+calendar entries stored on the imap server. so you can actually have the same addresses on more than one computer. The kolab project has a groupware server that uses imap to exchange calendar entries and vcards. But you can also setup simple sharing in your office if you have f.e. cyrus by symlinking shared folders. [end paste] Yeah, I've explored the Outlook connectors some. Do any exist that are free/open source? On 8/30/06, Curtis Maloney <cmaloney(a)cardgate.net> wrote: > > ajmcello ajmcello wrote: > > When I attempted to import my Contacts list into dovecot, my mail > > client told me that the IMAP server did not support "Special" folders. > > > > Is there a way to to do the contacts, or sync up Contacts & Calendar > from a > > database or something else? > > > > I'm using both Thunderbird and Outlook. > > What are you using in Thunderbird to store your contacts+calendar info on > the > IMAP server? The only tool I've found like that is Kolab Sync, which > didn't > work last time I tried it. :/ > > As for Outlook - it's absolutely correct. You'd need some sort of > "Connector" > to translate their Contacts/Calendar storage to IMAP. > > -- > Curtis Maloney > cmaloney(a)cardgate.net >

2 1

[Dovecot] dovecot with Calendar or Contacts?
by ajmcello 31 Aug '06

31 Aug '06

I don't know. Is IMAP capable of serving "Special" folders? If so, then I would say yes. Are there plans for dovecot to support this feature? And if not, does anybody know of a way to sync up Contacts & Calendar information from one client to another (using the same id) with Thunderbird, Outlook, or another MTA? Curious to know. Thanks. On 8/30/06, Odhiambo WASHINGTON <odhiambo.raburu(a)wananchi.com> wrote: > > * On 30/08/06 14:24 -0700, ajmcello ajmcello wrote: > | When I attempted to import my Contacts list into dovecot, my mail > | client told me that the IMAP server did not support "Special" folders. > | > | Is there a way to to do the contacts, or sync up Contacts & Calendar > from a > | database or something else? > | > | I'm using both Thunderbird and Outlook. > > Is this really a server function? > > > > -Wash > > http://www.netmeister.org/news/learn2quote.html > > DISCLAIMER: See http://www.wananchi.com/bms/terms.php > > -- > +======================================================================+ > |\ _,,,---,,_ | Odhiambo Washington < wash(a)wananchi.com> > Zzz /,`.-'`' -. ;-;;,_ | Wananchi Online Ltd. www.wananchi.com > |,4- ) )-,_. ,\ ( `'-'| Tel: +254 20 313985-9 +254 20 313922 > '---''(_/--' `-'\_) | GSM: +254 722 743223 +254 733 744121 > +======================================================================+ > > A great many people think they are thinking when they are merely > rearranging their prejudices. > -- William James >

2 1

[Dovecot] dovecot with Calendar or Contacts?
by ajmcello ajmcello 31 Aug '06

31 Aug '06

When I attempted to import my Contacts list into dovecot, my mail client told me that the IMAP server did not support "Special" folders. Is there a way to to do the contacts, or sync up Contacts & Calendar from a database or something else? I'm using both Thunderbird and Outlook. Thanks.

3 2

[Dovecot] format for per-user QUOTAs in passwd-file?
by OpenMacNews 30 Aug '06

30 Aug '06

what's the correct format for setting per-user override quotas in a passwd-file? in my "dovecot.conf", i've: protocol imap { mail_plugins = quota imap_quota mail_plugin_dir = /usr/local/dovecot-plugins/imap plugin { quota = maildir:storage=10240 # 10 MB quota limit } in my "imap_user_file", i've: passdb passwd-file { args = /etc/dovecot/imap_user_file ... i have: user@mydomain.com:{PLAIN}testpass:::::: quota=maildir:storage=4096 on login to the user(a)mydomain.com, however, QUOTA on the account's mailboxes is reporting as the global default: 10240 something wrong in my user string, i s'pose ... thanks, richard -- /"\ \ / ASCII Ribbon Campaign X against HTML email, vCards / \ & micro$oft attachments [GPG] OpenMacNews at gmail dot com fingerprint: 50C9 1C46 2F8F DE42 2EDB D460 95F7 DDBD 3671 08C6

1 1

[Dovecot] [long message] problem with imap authentication process
by computational_complex-forthespam＠yahoo.it 30 Aug '06

30 Aug '06

Hi guys, this is my first message in list. i've installed dovecot 1 RC 7 from sources and set it up with postfix as a pop3 mail server: all worked perfectly. Now i would like to set up a local web mail interface; most web mails (eg horde,squirrelMail) use imap to get mail; so i've to set up dovecot imap server. I've set up imap settings in config file and added imap to protocols (i don't use ssl encription): > protocols = pop3 imap But when i run dovecot, i get "USER environment missing", what does it mean? : > root@mailer:~# for i in /var/log/mail.*; do echo > $i ; done > root@mailer:~# echo $USER > root > root@mailer:~# > root@mailer:~# /usr/sbin/dovecot > root@mailer:~# cat /var/log/mail.info > Aug 30 15:58:42 mailer dovecot: Dovecot v1.0.rc7 starting up > Aug 30 15:58:43 mailer dovecot: imap-login: USER environment missing > Aug 30 15:58:43 mailer dovecot: Login process died too early - shutting down > Aug 30 15:58:43 mailer dovecot: child 3929 (login) returned error 89 As you seen, $USER environment variable was set; authentication process user id (in config file) was set to root. Mail users are virtual users and their account informations are stored to a passwd-like file. I searched in the source code the error string and found this dovecot-1.0.rc7/src/imap/main.c: > user = getenv("USER"); > if (user == NULL) { > if (IS_STANDALONE()) > user = getlogin(); > if (user == NULL) > i_fatal("USER environment missing"); > } This is the only occurrence of the error. This code is simple, Why getenv("USER") returns NULL ? variable was set when i run dovecot.... mmm..Any suggestion? Is this a bug of a process cloning /forking system in dovecot? I looked in mailinglist archives for a solution but nothing found. Anyway can you suggest me any web mail with simple configuration with postfix+dovecot virtual accounts? What about oMail-webmail? is there a way to integrate it in dovecot authentication ? Any help appreciated! Valerio

1 0

[Dovecot] filtering problem using sieve
by ajmcello ajmcello 30 Aug '06

30 Aug '06

For some reason, I cannot filter messages that have uppercase or possibly mixed casing in them. I have tried several tests by connecting to port 25 and sending messages. The ones that fail are from MAILER-DAEMON(a)mydomain.net. Here are the rules I have tried: require ["fileinto", "reject", "vacation"]; if header :contains ["To", "Cc", "Bcc", "Reply-To", "In-Reply-To"] " mailer-daemon(a)mydomain.net" { fileinto "mailer-daemon"; stop; } if header :contains ["To", "Cc", "Bcc", "Reply-To", "In-Reply-To"] " MAILER-DAEMON(a)mydomain.net" { fileinto "mailer-daemon"; stop; } if header :contains ["To", "Cc", "Bcc", "Reply-To", "In-Reply-To"] " MAILER-DAEMON(a)mail.mydomain.net" { fileinto "mailer-daemon"; stop; } if header :contains ["To", "Cc", "Bcc", "Reply-To", "In-Reply-To"] " mailer-daemon(a)mail.mydomain.net" { fileinto "mailer-daemon"; stop; } They all fail to deliver to my mail folder "mailer-daemon" and go to my inbox instead. Anybody have any ideas what I am doing wrong? Also, how can I add a wildcard so that I do not have to specify subdomains? Thank you!

3 2

[Dovecot] Dovecot public folders ACL
by typus vulgaris 29 Aug '06

29 Aug '06

Hi, all! I'm new to dovecot but trying to setup read-only public folders for different user groups. My goal is to create several public folder such as sales, operation etc with per user index. But I have some problem which I can't resolve with Google and Dovecot.Org. Now users can see and subscribe to test folder "share", but I can't block ability to delete messages via ACL. Here is file system permissions: public/.share ]> ls -la total 12 drwxrwx--- 5 share mail 512 17 авг 12:17 . drwxrwx--- 6 root mail 512 17 авг 11:04 .. drwxrwx--- 2 share mail 512 17 авг 11:18 cur -rwxrwx--- 1 root mail 21 17 авг 10:36 dovecot-acl -rwxrwx--- 1 root mail 0 16 авг 17:56 dovecot-shared drwxrwx--- 2 share mail 512 17 авг 11:17 new drwxrwx--- 2 share mail 512 17 авг 11:17 tmp my dovecot-acl file: public/.share ]> cat dovecot-acl owner lr user=typ lr But user typ can delete messages. But ACL seems working because if I remove letter 'l' from typ's setting he cannot see the folder. Here is my config: ----------8<------------ protocols = imap ssl_disable = yes disable_plaintext_auth = no shutdown_clients = yes log_path = /var/log/dovecot/sys.log info_log_path = /var/log/dovecot/info.log login_process_size = 64 verbose_proctitle = yes first_valid_gid = 0 mail_extra_groups = mail default_mail_env = mbox:/var/mail/%u:INDEX=/home/user/%u:INBOX=/var/mail/%u namespace private { separator = / prefix = location = maildir:/home/user/%u/.maildir inbox = yes } namespace public { separator = / prefix = Public/ location = maildir:/home/user/public:CONTROL=/home/user/%u/public/control:INDEX=/home/user/%u/public/index hidden = no inbox = no } mbox_read_locks = fcntl mbox_write_locks = dotlock fcntl mbox_lock_timeout = 300 mbox_very_dirty_syncs = yes umask = 0007 protocol imap { listen = 192.168.101.1:143 mail_plugins = acl imap_client_workarounds = delay-newmail outlook-idle } protocol pop3 { pop3_uidl_format = %08Xu%08Xv pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } auth default { mechanisms = plain passdb pam { } userdb passwd { } user = root } plugin { } -----------------8<-------------- -- typus vulgaris

4 4

[Dovecot] 0.99.11 (CentOS4 or RHEL4) to 1.0.rc7 upgrade folder issue
by Stephen Warren 29 Aug '06

29 Aug '06

[Sending this again from the email account that I actually have subscribed to the list - hopefully won't be a dup...] We have been running dovecot-0.99.11-2.EL4.rpm on CentOS4 (since that's the latest that ships with RHEL/CentOS) for a while. Aalso in parallel, we have been running various 1.0 betas and RCs on a different port for a different set of more test-tolerant users. This weekend, I upgraded to 1.0.rc7, and made all users use this. I found a small issue. All our users have a large set of folders in their Maildir. For the users who got upgraded from 0.99.11 to 1.0.rc7 (well, the one user who accessed their mail so far since the upgrade...) their folders weren't showing up in Thunderbird any more. Deleting all the dovecot-* files in the Maildir didn't help. In the end, the user re-subscribed to all the folders and then they showed up. (FYI, this is a right-click operation on the account in the Thunderbird tree view, subscribe menu option, then re-check all the folder names). Is there anything that can be implemented in 1.0.rc7 so that users don't have to manually re-subscribe to everything, so the upgrade process in this situation is a little more transparent? Is this simply a matter of the different Dovecot versions naming the folders with different UUIDs (or whatever the IMAP protocol uses), or something else?

3 2

[Dovecot] auth mechanisem and postfixadmin
by xrado 29 Aug '06

29 Aug '06

Aug 29 20:58:01 example dovecot: auth(default): client in: AUTH^I2^IPLAIN^Iservice=IMAP^Isecured^Ilip=127.0.0.1^Irip=127.0.0.1^Iresp=AHJhZG9AZXhhbXBsZS5jb20AcmFkbw== Aug 29 20:58:01 example dovecot: auth-worker(default): sql(rado(a)example.com,127.0.0.1): query: SELECT password FROM mailbox WHERE username = 'rado(a)example.com' Aug 29 20:58:01 example dovecot: auth-worker(default): sql(rado(a)example.com,127.0.0.1): Password mismatch Aug 29 20:58:01 example dovecot: auth-worker(default): sql(rado(a)example.com,127.0.0.1): PLAIN(rado) != '$1$997b1881$fpU1U5wRtWfVZQqbat0km/' Aug 29 20:58:03 example dovecot: auth(default): client out: FAIL^I2^Iuser=rado(a)example.com Aug 29 20:58:08 example dovecot: imap-login: Aborted login: user=<rado(a)example.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured which mechanisem do i have to use, database uses md5crypt-ed passwords rado.

1 0

[Dovecot] Problem using Apple Mail with Dovecot (fwd)
by Jason Fesler 29 Aug '06

29 Aug '06

---------- Forwarded message ---------- From: Bruce Arthur <barthur(a)apple.com> To: dovecot(a)dovecot.org Cc: Bruce Arthur <barthur(a)apple.com> Date: Tue, 29 Aug 2006 09:04:35 -0700 Subject: Problem using Apple Mail with Dovecot Server Configuration: dovecot-1.0.rc6 Built with: ./configure --prefix=/usr/local OS: FreeBSD 4.10-STABLE i386 running on ufs Client configuration Mac OS X 10.4.7, using Apple Mail client. Issue: Apple Mail is able to connect to the server, but it is not seeing the available folder correctly. I did a little debugging and it looks like dovecot is failing to provide the separator in response to the LIST command. I did not spend anytime trying to figure out how other mail clients are getting this (my tcpdump is a little rusty these days). Here is what I see Mail sending to the server, and it's responses. 1 LOGIN applecot ******** 1 OK Logged in. 2 CAPABILITY * CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS 2 OK Capability completed. 3 LIST "" "" 3 OK List completed. The "LIST" command should be sending back the mailbox separator. The IMAP spec seems pretty clear about this (but reading RFC's is always a bit of a challenge). From the RFC: http://www.ietf.org/rfc/rfc2060.txt 6.3..8. LIST Command Arguments: reference name mailbox name with possible wildcards Responses: untagged responses: LIST Result: OK - list completed NO - list failure: can't list that reference or name BAD - command unknown or arguments invalid An empty ("" string) reference name argument indicates that the mailbox name is interpreted as by SELECT. The returned mailbox names MUST match the supplied mailbox name pattern. A non-empty reference name argument is the name of a mailbox or a level of mailbox hierarchy, and indicates a context in which the mailbox name is interpreted in an implementation-defined manner. An empty ("" string) mailbox name argument is a special request to return the hierarchy delimiter and the root name of the name given in the reference. The value returned as the root MAY be null if the reference is non-rooted or is null. In all cases, the hierarchy delimiter is returned. This permits a client to get the hierarchy delimiter even when no mailboxes by that name currently exist. Example: C: A101 LIST "" "" S: * LIST (\Noselect) "/" "" S: A101 OK LIST Completed C: A102 LIST #news.comp.mail.misc "" S: * LIST (\Noselect) "." #news. S: A102 OK LIST Completed C: A103 LIST /usr/staff/jones "" S: * LIST (\Noselect) "/" / S: A103 OK LIST Completed C: A202 LIST ~/Mail/ % S: * LIST (\Noselect) "/" ~/Mail/foo S: * LIST () "/" ~/Mail/meetings S: A202 OK LIST completed -- Bruce

1 0

Re: [Dovecot] Problem using Apple Mail with Dovecot
by Jason Fesler 29 Aug '06

29 Aug '06

> Server Configuration: > dovecot-1.0.rc6 > Built with: ./configure --prefix=/usr/local > OS: FreeBSD 4.10-STABLE i386 running on ufs Thanks, Bruce. Timo et all; Bruce specifically has been looking at my instance of dovecot after a friend of his reported problems with Mail.app and my server. More information: Stock dovecot namespaces work; This name space does not: namespace private { separator = . prefix = INBOX. inbox = yes hidden = no } namespace private { separator = / inbox = no hidden = yes prefix = "#mail/" location = mbox:/home/%u/mail } > > Client configuration > Mac OS X 10.4.7, using Apple Mail client. > > Issue: > Apple Mail is able to connect to the server, but it is not seeing the > available folder correctly. > > I did a little debugging and it looks like dovecot is failing to provide the > separator in response to the LIST command. I did not spend anytime trying to > figure out how other mail clients are getting this (my tcpdump is a little > rusty these days). Here is what I see Mail sending to the server, and it's > responses. > > 1 LOGIN applecot ******** > 1 OK Logged in. > 2 CAPABILITY > * CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT > LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS > 2 OK Capability completed. > 3 LIST "" "" > 3 OK List completed. > > The "LIST" command should be sending back the mailbox separator. The IMAP > spec seems pretty clear about this (but reading RFC's is always a bit of a > challenge). > > From the RFC: http://www.ietf.org/rfc/rfc2060.txt > 6.3..8. LIST Command > > Arguments: reference name > mailbox name with possible wildcards > > Responses: untagged responses: LIST > > Result: OK - list completed > NO - list failure: can't list that reference or name > BAD - command unknown or arguments invalid > ? > An empty ("" string) reference name argument indicates that the > mailbox name is interpreted as by SELECT. The returned mailbox > names MUST match the supplied mailbox name pattern. A non-empty > reference name argument is the name of a mailbox or a level of > mailbox hierarchy, and indicates a context in which the mailbox > name is interpreted in an implementation-defined manner. > > An empty ("" string) mailbox name argument is a special request to > return the hierarchy delimiter and the root name of the name given > in the reference. The value returned as the root MAY be null if > the reference is non-rooted or is null. In all cases, the > hierarchy delimiter is returned. This permits a client to get the > hierarchy delimiter even when no mailboxes by that name currently > exist. > ? > > Example: C: A101 LIST "" "" > S: * LIST (\Noselect) "/" "" > S: A101 OK LIST Completed > C: A102 LIST #news.comp.mail.misc "" > S: * LIST (\Noselect) "." #news. > S: A102 OK LIST Completed > C: A103 LIST /usr/staff/jones "" > S: * LIST (\Noselect) "/" / > S: A103 OK LIST Completed > C: A202 LIST ~/Mail/ % > S: * LIST (\Noselect) "/" ~/Mail/foo > S: * LIST () "/" ~/Mail/meetings > S: A202 OK LIST completed > > -- Bruce > >

1 0

Re: [Dovecot] IMAP Query
by Magnus Holmgren 29 Aug '06

29 Aug '06

On Tuesday 29 August 2006 15:41, Chris Kenward took the opportunity to say: > Hi Magnus > > > Just a couple of general netiquette issues: When bringing up > > a new topic you shouldn't use the Reply command, and you > > should also use a more descriptive subject, such as "Mail > > deleted from IMAP server doesn't disappear". > > Sorry about that - will try and behave a little better in future. In the future, please send follow-ups to the mailing list. The support you get from mailing lists is of a collaborative nature and you can't normally assume that because someone replies to your questions, he or she is prepared to give you personal assistance. Also, the other list subscribers may be interested in the answers. > > What mail user agent are you using? Do the messages *appear* > > in the Trash folder? Messages, when deleted, are normally > > only marked as such and not really removed until they are expunged. > > I'm using Outlook 2003. I've set up this particular account in Outlook as > an IMAP account and the folders all appear as they should down the left > hand side. > > 1. Mail arrives and I get the "beep" to let me know. > 2. I go and look at the Inbox, which has the new message in bold. > 3. I read the message and then highlight and delete it, using either > the DEL key on the keyboard or else the X in Outlook. > 4. The message header is scored through with a line, denoting that it > has been deleted but that's it. The message neither moves from the > Inbox to Trash nor does it disappear. So I end up with a load of > 'deleted' messages in the Inbox. > > Trust that's enough detail. I would have imagined that there would be some > sort of "refresh" every so many seconds or something which would purge > 'deleted' messages. This is a client issue. Some clients let you choose between deleting messages by moving them to the Trash folder or just by marking them as deleted (which is, arguably, The IMAP Way). I don't use Outlook 2003 myself but from what I find by googling it seems that there is no such option in Outlook. However, you can choose whether deleted messages are hidden or shown. http://email.about.com/cs/outlooktips/qt/et060204.htm -- Magnus Holmgren holmgren(a)lysator.liu.se (No Cc of list mail needed, thanks)

3 3

[Dovecot] dovecot SASL as auth backend to exim?
by OpenMacNews 29 Aug '06

29 Aug '06

hi, i'm running dovecot branch_10 cvs on OSX 10.4.7 w/ exim 4.63. i'd like to use Dovecot's SASL as an auth backend to exim, instead of Cyrus-SASL. @ dovecot's sasl page: http://wiki.dovecot.org/Sasl i know there's a patch against exim 4.43: http://www.exim.org/eximwiki/AuthenticatedSmtpUsingDovecot that, purportedly, enables EXIM to use dovecot's SASL as an auth backend. questions: (1) with 'recent' updates to both dovecot/exim, is that patch still required? (2) if so, is that patch still viable/safe against 4.63? (3) can anyone provide a _specific_ example of the exim config(s) (Makefile, Router, Transport) they're using to 'make it work'? i've asked this question @ exim list, but, other than a 'why would you bother?' and a 'good luck with your efforts', no "joy" so far ... thanks, richard -- /"\ \ / ASCII Ribbon Campaign X against HTML email, vCards / \ & micro$oft attachments [GPG] OpenMacNews at gmail dot com fingerprint: 50C9 1C46 2F8F DE42 2EDB D460 95F7 DDBD 3671 08C6

2 1

[Dovecot] Auto-blacklisting hosts after too many failed logins
by Amon Ott 29 Aug '06

29 Aug '06

Hi folks, first of all thanks for Dovecot, I appreciate it a lot. On one of our servers, we experience regular tries to brute force logins, probably based on harvested mail addresses. Now I wonder if dovecot has or could in future have some mechanism to blacklist remote IP addresses after a configurable number of failures to login to any account. Blacklisted IPs could simply be disconnected without giving them a chance to do anything. After e.g. one day or one hour of no further connection, the blacklist entry could be dropped. As a bonus, it would be great to have a way to close the POP3/IMAP firewall ports to these IPs to avoid dovecot seeing the connection at all. A kind of blacklist status file on disk would be enough, from which some cron job could fill a firewall chain. If necessary, I would try to add this functionality myself. Amon. -- http://www.rsbac.org - GnuPG: 2048g/5DEAAA30 2002-10-22

5 4

[Dovecot] 1.0rc7 working well
by Bruce Lane 29 Aug '06

29 Aug '06

Fellow dove-users, Just a note to say that Dovecot 1.0rc7 is working very well indeed, supplying SPOP3, regular POP3, and TLS/SASL services on FreeBSD 6.1 Production, in conjunction with Postfix 2.3.2. I have authentication methods PAM and passwd in use. Keep the peace(es). -=-=-=-=-=-=-=-=-=-=-=- Bruce Lane, Owner & Head Hardware Heavy, Blue Feather Technologies -- http://www.bluefeathertech.com kyrrin (at) bluefeathertech do/t c=o=m "If Salvador Dali had owned a computer, would it have been equipped with surreal ports?"

2 1