- dovecot - dovecot.org

[Dovecot] Help with vpopmail authentication
by Fran Márquez 27 Feb '13

27 Feb '13

Hello, Currently I have a qmail server with vpopmail+courierImap. I want setup a new server in DMZ for proxy IMAP connections and I have a doubt with authentication method. I've read that dovecot can use a vpopmail driver for authentication. As my user database/password is stored by vpopmail, I think that this would be the best method for check the auth logins against dovecot. But I've read the docs and many examples availables on WWW and I haven't found any reference to validate against an *external* vpopmail server. The examples configuration doesn't contain any host/port, so I suppose that driver try to use a local vopomaild. In my case, I only want dovecot for proxying IMAP connections to my current mail server, without store mails or user/password info in dovecot server, because all that info is already stored in real mailserver. The ideal scenario would be this: user ---IMAPs----> dovecot ----- IMAP ---> mailserver Any advice will be wellcome. Regards and thank you very much in advance

1 0

[Dovecot] > 2.2.rc2: doveadm who -> Bad file descriptor
by Lutz Preßler 27 Feb '13

27 Feb '13

Hello, 2.2.rc2 is reproducibly fine, but (all from xi.rename-it.nl) dovecot_2.2.0~rc2-0~auto+11 (15988:2020ed15efb9) and dovecot_2.2.0~rc2-0~auto+7 (15980:d84c7c11d7b7) have "doveadm who" not working: # doveadm who doveadm(root): Fatal: fcntl(-1, F_GETFL) failed: Bad file descriptor strace doveadm who ends with: socket(PF_FILE, SOCK_STREAM, 0) = 8 fcntl(8, F_GETFL) = 0x2 (flags O_RDWR) fcntl(8, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(8, {sa_family=AF_FILE, path="/var/run/dovecot/anvil"}, 110) = 0 fcntl(-1, F_GETFL) = -1 EBADF (Bad file descriptor) write(2, "doveadm(root): Fatal: fcntl(-1, "..., 69doveadm(root): Fatal: fcntl(-1, F_GETFL) failed: Bad file descriptor ) = 69 exit_group(75) = ? same with 2.2.rc2 includes: socket(PF_FILE, SOCK_STREAM, 0) = 8 fcntl(8, F_GETFL) = 0x2 (flags O_RDWR) fcntl(8, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(8, {sa_family=AF_FILE, path="/var/run/dovecot/anvil"}, 110) = 0 fcntl(8, F_GETFL) = 0x802 (flags O_RDWR|O_NONBLOCK) fcntl(8, F_SETFL, O_RDWR) = 0 fstat(8, {st_mode=S_IFSOCK|0777, st_size=0, ...}) = 0 write(8, "VERSION\tanvil\t1\t0\nCONNECT-DUMP\n", 31) = 31 Lutz -- Lutz Preßler <Lutz.Pressler(a)SerNet.DE> http://www.SerNet.DE/ SerNet Service Network GmbH, Bahnhofsallee 1b, D-37081 Göttingen Tel.: +49-551-370000-2, FAX: +49-551-370000-9 AG Göttingen, HRB 2816, GF: Dr. Johannes Loxen

2 2

Re: [Dovecot] Sieve filters on folders, different from INBOX
by Valery V. Sedletski 27 Feb '13

27 Feb '13

>> >> So, if sieve is invoked by lda, then, probably, I could invoke dovecot-lda from wrapper script on each mail >> after it is fetched? > >with getmail > >[destination] >type = MDA_external >path = /usr/lib/dovecot/deliver > >But then it will be copied to INBOX... -- Is it possible to specify the >other folder to deliver to, >> to the deliver program? > >the sieve filter invoked bx deliver does it, i.e rule > >if header :contains ... fileinto :create "folder" > >or whatever > Ah, yes. Really, I looked to mpop options, it can call various LDA's. And, dovecot-lda has "-m" parameter, which allows to specify the mailbox name. So, I can deliver the mail arrived by fetcher, via dovecot-lda, and Sieve filters will work. Also, as a bonus, delivering mail via LDA will correctly update user quotas -- the problem which resolved by itself :) Great :) >> >>> >>>> outgoing mail to folders, specific >>> >>> outgoing mail is smtp, with i.e imap copy to sent folder etc >>> if you want other folders your imap client should do it >>> >> >> So, I can invoke Sieve interpreter from SMTP server, or process it via dovecot-lda, like in fetcher case? > >in general ,i dont think so , there may be some workaround with server >bcc_copy and i.e plus adressing with sieve then for "sent" mail > Yes, this is a variant. But what if I modify the Dovecot post-login script (a wrapper for IMAP process), or add the sieve plugin to protocol "imap {mail_plugins = ...}" ? Will it be invoked on each operation with mailboxes? >> >>> >>> try i.e >>> >>> https://addons.mozilla.org/de/thunderbird/addon/send-filter/?src=search >>> >>> >>>> to their recipients. WBR, valery

2 1

[Dovecot] Protocol logging - TLS vs SSL
by Charles Marcus 27 Feb '13

27 Feb '13

Hi all, Ok, I have: login_log_format_elements = user=<%u> method=%m rip=%r lport=%{lport} mpid=%e %c session=<%{session}> We only allow inbound IMAP, and only SSL on port 993. Looking at the logs, %c is obviously the encryption type, but... Why does it say 'TLS', when it technically (there is a difference after all) should say 'SSL'? Not a big deal, but it is just something I've been meaning to ask. -- Best regards, */Charles/*

6 26

[Dovecot] Can't access to shared mailbox
by Angel L. Mateo 27 Feb '13

27 Feb '13

Hello, I have a user sharing a folder to me (and other users). This has worked for me for a time. And it is still working for some users, but not for me. I'm using thunderbird (17.0.3, ubuntu 12.04 package). My server is dovecot 2.1.9 (it's the same since it works). The user sharing its mailbox is: $ sudo doveadm user t userdb: t home : /home/generica/02/001002 uid : 1002 he is sharing its mailbox "cron". This is its dovecot-acl: root@myotis31:/home/generica/02/001002/Maildir# cat dovecot-acl user=<other user> kxeilprwts user=<my user> kxeilprwts user=<other user> kxeilprwts user=<other user> kxeilprwts user=<other user> kxeilprwts user=<other user> kxeilprwts user=<other user> kxeilprwts I can subscribe to this folder: # sudo doveadm mailbox subscribe -u <myuser> shared.t.cron # sudo doveadm mailbox list -u <myuser> -s INBOX ... ... shared.t.cron but when I try to access to this folder through thunderbird (what I really do in TB is subscribe/unsubscribe to it, because it is not actually listed in the folder list), I get: Feb 26 13:35:03 myotis32 dovecot: imap(<myuser>): Error: Couldn't create namespace 'shared.' for user shared: userdb didn't return a home directory, but plugin setting quota used it (%h): dict:User quota::file:%h/Maildir/dovecot.quota With doveadm commands I can access to the shared folder from my user (not the user sharing): $ sudo doveadm search -u <myuser> mailbox shared.t.cron | wc -l 652 Other users can use this shared folder without any (apparent) problem. I have attached my doveconf -n. Any idea? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868889150 Fax: 868888337

2 2

[Dovecot] Special characters in dovecot.conf
by Antonio Casado Rodriguez 27 Feb '13

27 Feb '13

Hi all, I've configured "quota_exceeded_message" in dovecot 1.2, but I have two questions: - Can I use "CRLF" in it? I'd like have two messages: english and spanish. - If char character set in dovecot.conf is ASCII, How do I set special characters (spanish)? The email received is in UTF-8 Thanks you -- Antonio Casado Rodríguez Administrador de Servicios de Red y Seguridad TIC Área de Comunicaciones STIC (Servicio de las Tecnologías de la Información y las Comunicaciones) UNIVERSIDAD DE ALMERÍA Este mensaje y los ficheros que puedan ser adjuntados son confidenciales. Los mismos contienen información reservada que no puede ser difundida. Si usted ha recibido este correo por error, tenga la amabilidad de eliminarlo de su sistema y avisar al remitente mediante reenvío a su dirección electrónica; no deberá copiar el mensaje ni divulgar su contenido a ninguna persona. Su dirección de correo electrónico junto a sus datos personales constan en un fichero titularidad de La UNIVERSIDAD DE ALMERÍA cuya finalidad es la de mantener el contacto con usted. Si quiere saber de qué información disponemos de usted, modificarla, y en su caso, cancelarla, puede hacerlo enviando un escrito al efecto, acompañado de una fotocopia de su D.N.I. a la siguiente dirección: UNIVERSIDAD DE ALMERÍA –. Secretaría General de La Universidad de Almería. Edificio Central, Planta baja. Ctra. Sacramento s/n, La Cañada de San Urbano. CP 04120 Almería

2 1

[Dovecot] Master passwords and ACLs
by Angel L. Mateo 27 Feb '13

27 Feb '13

Hello, Since I have activated acl plugin, master password is no longer working. I'm running dovecot 2.1.9 with master password and acl plugin (among others). I have attached my configuration. If I disable acl plugin, it works, but if I enabled it, dovecot fails. In the client, I get: amateo@joshua:~$ telnet myotis30.um.es 143 Trying 155.54.211.169... Connected to myotis30.um.es. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready. 1 login <user>*master <master pass> 1 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE QUOTA ACL RIGHTS=texk] Logged in 2 SELECT INBOX 2 NO [SERVERBUG] Internal error occurred. Refer to server log for more information. [2013-02-27 11:46:50] and in the server I get: Feb 27 11:46:47 myotis30 dovecot: imap-login: Login: user=<<user>>, method=PLAIN, rip=155.54.67.5, lip=155.54.211.169, mpid=53762, session=<aECqfbLWvACbNkMF> Feb 27 11:46:47 myotis30 dovecot: imap: Debug: Loading modules from directory: /usr/lib/dovecot/modules Feb 27 11:46:47 myotis30 dovecot: imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib01_acl_plugin.so Feb 27 11:46:47 myotis30 dovecot: imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib02_imap_acl_plugin.so Feb 27 11:46:47 myotis30 dovecot: imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib10_quota_plugin.so Feb 27 11:46:47 myotis30 dovecot: imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib11_imap_quota_plugin.so Feb 27 11:46:47 myotis30 dovecot: imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib20_zlib_plugin.so Feb 27 11:46:47 myotis30 dovecot: imap: Debug: Added userdb setting: plugin/master_user=master Feb 27 11:46:47 myotis30 dovecot: imap: Debug: Added userdb setting: plugin/quota_rule=*:storage=10G Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: Effective uid=113246, gid=110, home=/home/alumnos/46/113246 Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: acl: No acl_shared_dict setting - shared mailbox listing is disabled Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: Quota root: name=User quota backend=dict args=:file:/home/alumnos/46/113246/Maildir/dovecot.quota Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: Quota rule: root=User quota mailbox=* bytes=10737418240 messages=0 Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: Quota rule: root=User quota mailbox=Trash bytes=+1073741824 messages=0 Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: dict quota: user=<user>, uri=file:/home/alumnos/46/113246/Maildir/dovecot.quota, noenforcing=0 Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: Namespace : type=private, prefix=, sep=., inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/Maildir:INDEX=/var/indexes/<user> Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: maildir++: root=/home/alumnos/46/113246/Maildir, index=/var/indexes/<user>, control=, inbox=/home/alumnos/46/113246/Maildir, alt= Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: acl: initializing backend with data: vfile Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: acl: acl username = master Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: acl: owner = 0 Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: acl vfile: Global ACL directory: (none) Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: Namespace : type=private, prefix=BORRADOS., sep=., inbox=no, hidden=yes, list=no, subscriptions=yes location=maildir:~/Maildir/expunged Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: maildir++: root=/home/alumnos/46/113246/Maildir/expunged, index=, control=, inbox=, alt= Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: acl: initializing backend with data: vfile Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: acl: acl username = master Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: acl: owner = 0 Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: acl vfile: Global ACL directory: (none) Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: Namespace : type=shared, prefix=shared.%u., sep=., inbox=no, hidden=no, list=children, subscriptions=no location=maildir:%h/Maildir:INDEX=~/Maildir/shared/%u Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: shared: root=/var/run/dovecot, index=, control=, inbox=, alt= Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: acl: initializing backend with data: vfile Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: acl: acl username = master Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: acl: owner = 0 Feb 27 11:46:47 myotis30 dovecot: imap(<user>): Debug: acl vfile: Global ACL directory: (none) Feb 27 11:46:50 myotis30 dovecot: imap(<user>): Debug: acl vfile: file /home/alumnos/46/113246/Maildir/dovecot-acl not found Feb 27 11:46:50 myotis30 dovecot: imap(<user>): Error: Failed to autocreate mailbox INBOX: Permission denied This user, accesed directly, without master user, works perfectly, with no problem, even with acl plugin. Any idea? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868889150 Fax: 868888337

1 1

[Dovecot] "sent" and "accepted" missing mails
by Spyros Tsiolis 27 Feb '13

27 Feb '13

Hello all, OK, this most probably is not dovecot related. However, I have to start from somewhere. output of "dovecot -n" : # 1.2.16: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.17.4.el5 i686 CentOS release 5.5 (Final) ext3 base_dir: /var/run/dovecot/ log_path: /var/log/dovecot/dovecot.log info_log_path: /var/log/dovecot/dovecot-info.log ssl_parameters_regenerate: 48 verbose_ssl: yes login_dir: /var/run/dovecot//login login_executable: /usr/local/dovecot/libexec/dovecot/imap-login login_greeting: * Dovecot ready * login_max_processes_count: 96 mail_location: maildir:/var/MailRoot/domains/%d/%n/Maildir mail_plugins: zlib auth default: verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: /etc/dovecot/passwd passdb: driver: pam userdb: driver: static args: uid=vmail gid=vmail home=/home/vmail/%u userdb: driver: passwd User (really weird user) today tells me she is missing "sent" and "accepted" folders. She is running the latest version of Thunderbird on a windows XP pro 32-bit machine. My question is : Should I hunt something that is dovecot-related or is it MUA related ? And since I brought this up; Does anyone know if dovecot (v1.2.16) has any limits on user quota, message sizes and stuff like that ? Thank you kindly, spyros ---- "I merely function as a channel that filters music through the chaos of noise" - Vangelis

3 2

[Dovecot] doveadm search not showing expected results
by btb＠bitrate.net 27 Feb '13

27 Feb '13

i'm running doveadm search: >doveadm search -A mailbox sent savedbefore 365d > and it's returning no results. a similar command does return some results: >doveadm search -A mailbox sent savedbefore 120d | grep -iF 'jdoe' jdoe 7b9a8b0b7d37504fe72c000055e4fe9a 65 jdoe 7b9a8b0b7d37504fe72c000055e4fe9a 66 jdoe 7b9a8b0b7d37504fe72c000055e4fe9a 67 jdoe 7b9a8b0b7d37504fe72c000055e4fe9a 68 jdoe 7b9a8b0b7d37504fe72c000055e4fe9a 69 jdoe 7b9a8b0b7d37504fe72c000055e4fe9a 70 jdoe 7b9a8b0b7d37504fe72c000055e4fe9a 71 jdoe 7b9a8b0b7d37504fe72c000055e4fe9a 72 jdoe 7b9a8b0b7d37504fe72c000055e4fe9a 73 jdoe 7b9a8b0b7d37504fe72c000055e4fe9a 74 [...] however, i see many messages in the sent mailbox much older than 365 days: >l ~jdoe/mail/Maildir/.sent/cur/ total 82M -rw------- 1 jdoe jdoe 411 Jul 12 2011 1310503747.M652859P14078.flip,S=411,W=423:2,S -rw------- 1 jdoe jdoe 515 Jul 12 2011 1310523810.M800998P5307.flip,S=515,W=530:2,Sgh -rw------- 1 jdoe jdoe 1.4K Jul 17 2011 1310922140.M604706P14587.flip,S=1339,W=1378:2,Sgh -rw------- 1 jdoe jdoe 2.7K Jul 17 2011 1310955899.M58727P3373.flip,S=2731,W=2814:2,Sgh -rw------- 1 jdoe jdoe 4.1K Jul 18 2011 1311032789.M471208P19367.flip,S=4162,W=4284:2,Sgh -rw------- 1 jdoe jdoe 451 Jul 22 2011 1311363858.M21157P19993.flip,S=451,W=464:2,Sgh -rw------- 1 jdoe jdoe 461 Jul 23 2011 1311436347.M315008P29267.flip,S=461,W=474:2,Sgh -rw------- 1 jdoe jdoe 1.6K Jul 26 2011 1311731312.M902135P25749.flip,S=1607,W=1655:2,Sgh -rw------- 1 jdoe jdoe 888 Jul 31 2011 1312161704.M81319P3943.flip,S=888,W=911:2,Sgh -rw------- 1 jdoe jdoe 676 Aug 4 2011 1312512384.M809375P3684.flip,S=676,W=692:2,Sgh -rw------- 1 jdoe jdoe 556 Aug 6 2011 1312669537.M999983P18243.flip,S=556,W=571:2,Sgh -rw------- 1 jdoe jdoe 1.8K Aug 7 2011 1312737844.M921026P22678.flip,S=1769,W=1817:2,RSgh -rw------- 1 jdoe jdoe 2.5K Aug 8 2011 1312842718.M632088P24434.flip,S=2489,W=2559:2,Sgh -rw------- 1 jdoe jdoe 2.3K Aug 10 2011 1312997501.M29900P8705.flip,S=2254,W=2306:2,RSghi -rw------- 1 jdoe jdoe 1.2K Aug 10 2011 1312998375.M806199P8705.flip,S=1200,W=1223:2,S -rw------- 1 jdoe jdoe 2.8K Aug 10 2011 1312998687.M179687P8705.flip,S=2857,W=2931:2,S -rw------- 1 jdoe jdoe 1.9K Aug 10 2011 1313017076.M909199P8264.flip,S=1889,W=1941:2,Sgh -rw------- 1 jdoe jdoe 2.8K Aug 12 2011 1313172631.M470122P23201.flip,S=2822,W=2895:2,RSgh -rw------- 1 jdoe jdoe 3.3K Aug 16 2011 1313502988.M870415P19669.flip,S=3333,W=3413:2,RSghi -rw------- 1 jdoe jdoe 3.4K Aug 16 2011 1313523978.M484997P19669.flip,S=3447,W=3534:2,S -rw------- 1 jdoe jdoe 939 Aug 16 2011 1313545488.M796759P21368.flip,S=939,W=968:2,Sgh -rw------- 1 jdoe jdoe 3.9K Aug 17 2011 1313600016.M183385P25953.flip,S=3989,W=4092:2,S -rw------- 1 jdoe jdoe 1.3K Aug 22 2011 1314028430.M280232P10201.flip,S=1291,W=1326:2,S -rw------- 1 jdoe jdoe 943 Aug 22 2011 1314067361.M643189P1408.flip,S=943,W=967:2,Sgh -rw------- 1 jdoe jdoe 1.1K Aug 23 2011 1314114645.M26643P14083.flip,S=1108,W=1142:2,S -rw------- 1 jdoe jdoe 932 Aug 24 2011 1314237640.M473097P22476.flip,S=932,W=954:2,Sgh -rw------- 1 jdoe jdoe 5.8K Sep 1 2011 1314900538.M22534P26553.flip,S=5851,W=5976:2,Sgh [...] -rw------- 1 jdoe jdoe 423 Feb 17 13:00 1361124040.M492223P13245.xenon,S=423,W=436:2,Sab -rw------- 1 jdoe jdoe 423 Feb 17 13:02 1361124143.M127879P13245.xenon,S=423,W=436:2,Sab -rw------- 1 jdoe jdoe 412 Feb 17 14:13 1361128391.M812807P13644.xenon,S=412,W=425:2,Sab -rw------- 1 jdoe jdoe 1.6K Feb 18 21:12 1361239930.M525334P20966.xenon,S=1621,W=1660:2,Sab -rw------- 1 jdoe jdoe 422 Feb 19 20:53 1361325222.M901235P32184.xenon,S=422,W=435:2,Sab -rw------- 1 jdoe jdoe 1.8K Feb 19 21:06 1361325990.M129075P32180.xenon,S=1818,W=1864:2,Sab -rw------- 1 jdoe jdoe 424 Feb 19 21:13 1361326428.M381244P32180.xenon,S=424,W=437:2,Sab -rw------- 1 jdoe jdoe 424 Feb 19 21:22 1361326968.M84809P32180.xenon,S=424,W=437:2,Sab -rw------- 1 jdoe jdoe 424 Feb 19 21:24 1361327050.M328090P32180.xenon,S=424,W=437:2,Sab -rw------- 1 jdoe jdoe 424 Feb 19 21:25 1361327139.M963578P32180.xenon,S=424,W=437:2,Sab -rw------- 1 jdoe jdoe 1.3K Feb 20 08:23 1361366627.M318860P22786.xenon,S=1230,W=1260:2,S -rw------- 1 jdoe jdoe 3.0K Feb 20 10:44 1361375042.M340353P5202.xenon,S=3019,W=3082:2,S -rw------- 1 jdoe jdoe 1.1K Feb 21 09:09 1361455754.M925454P13135.xenon,S=1025,W=1048:2,S -rw------- 1 jdoe jdoe 1.4K Feb 21 11:18 1361463526.M927071P13133.xenon,S=1344,W=1376:2,S -rw------- 1 jdoe jdoe 1.6K Feb 23 11:14 1361636078.M972572P18385.xenon,S=1636,W=1672:2,Sab -rw------- 1 jdoe jdoe 1.5K Feb 23 11:26 1361636803.M56491P18385.xenon,S=1490,W=1524:2,Sab -rw------- 1 jdoe jdoe 2.2K Feb 24 14:25 1361733929.M725648P18385.xenon,S=2178,W=2229:2,Sab > i do see these older messages properly listed and viewable in my imap client. how can i figure out what i'm doing wrong, and troubleshoot why doveadm doesn't seem to consider these message as matching? thanks -ben

2 2

[Dovecot] Deleted / read mails show up as new on remote imap clients
by Andre Bischof 27 Feb '13

27 Feb '13

Hi, I've one problem: Mails, which I already read or deleted via my IMAP client (Thunderbird) on the same machine running the server (it runs behind DynDNS on my local machine, thanks to http://mein.homelinux.com/wiki/mailserver/) show up again if I connect via IMAP from other client computers, i.e. my notebook (Thunderbird again). As you can see from the config below I have /home/user/Maildir, not /var/mail - is that the problem? Or is that anything else, resulting in status from emails not being stored (or not being available remote) in the responding dovecot files (dovecot.index?). Some month ago I migrated from Cyrus, and if I remember correct I had some problems with migrating subscriptions, stati and so on (one had to use a special script, sorry, it's been some time now) ;-) So maybe s.th. went wrong which could be the source of this problem? Just guessing ... Ok, here's my config: root@linux:/lost+found# dovecot -n # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.5.0-25-generic x86_64 Ubuntu 12.10 auth_verbose = yes lda_mailbox_autosubscribe = yes mail_debug = yes mail_location = maildir:~/Maildir managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes list = yes location = prefix = separator = . type = private } passdb { driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } postmaster_address = postmaster@localhost protocols = imap pop3 sieve service auth { unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } protocol imap { imap_client_workarounds = delay-newmail mail_max_userip_connections = 10 } protocol pop3 { mail_max_userip_connections = 10 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { deliver_log_format = msgid=%m: %$ mail_plugins = sieve sieve postmaster_address = postmaster quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r } root@linux:/lost+found# root@linux:/lost+found# dovecot -n # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.5.0-25-generic x86_64 Ubuntu 12.10 auth_verbose = yes lda_mailbox_autosubscribe = yes mail_debug = yes mail_location = maildir:~/Maildir managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes list = yes location = prefix = separator = . type = private } passdb { driver = pam } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } postmaster_address = postmaster@localhost protocols = imap pop3 sieve service auth { unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } protocol imap { imap_client_workarounds = delay-newmail mail_max_userip_connections = 10 } protocol pop3 { mail_max_userip_connections = 10 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { deliver_log_format = msgid=%m: %$ mail_plugins = sieve sieve postmaster_address = postmaster quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r } root@linux:/lost+found# If you need other info pls let me know. Any help is greatly appreciated! Regards Andre -- rheinSinn - A. Bischof Gottesweg 46, 50969 Köln Tel. 0221 / 46 75 59 87 - Mob. 0179 / 510 45 92 andre.bischof(a)rheinsinn.de www.rheinsinn.de - www.coaching-evaluationen.de

4 9

[Dovecot] Converting a POP3 client to IMAP
by Kristen J. Webb 27 Feb '13

27 Feb '13

I have a dovecot 2.0 dovecot server set up for https/imap with spam, av, and some preliminary sieve filters in place. Our current email is outsourced and so we have used POP3 to keep all email on our systems for many years. I have run tests to move mail to the new imap server and that seems to work pretty well. However, we have lots of mail going back over a decade and used a lot of aliases that forwarded email to many users. I find the moving mail multiple times using Thunderbird results in multiple copies of the same email. Is there a best practice for moving mail such that we can take advantage of the hard link feature for all those older copies that are currently in POP3 files? It would also be nice to be able to auto file things. I don't see the sieve filters being activated when I copy mail in Thunderbird. Many thanks in advance for any guidance. Kris -- This message is NOT encrypted -------------------------------- Mr. Kristen J. Webb Chief Technology Officer Teradactyl LLC. 2450 Baylor Dr. S.E. Albuquerque, New Mexico 87106 Phone: 1-505-338-6000 Email: kwebb(a)teradactyl.com Web: http://www.teradactyl.com Providers of Scalable Backup Solutions for Unique Data Environments -------------------------------- NOTICE TO RECIPIENTS: Any information contained in or attached to this message is intended solely for the use of the intended recipient(s). If you are not the intended recipient of this transmittal, you are hereby notified that you received this transmittal in error, and we request that you please delete and destroy all copies and attachments in your possession, notify the sender that you have received this communication in error, and note that any review or dissemination of, or the taking of any action in reliance on, this communication is expressly prohibited. Regular internet e-mail transmission cannot be guaranteed to be secure or error-free. Therefore, we do not represent that this information is complete or accurate, and it should not be relied upon as such. If you prefer to communicate with Teradactyl LLC. using secure (i.e., encrypted and/or digitally signed) e-mail transmission, please notify the sender. Otherwise, you will be deemed to have consented to communicate with Teradactyl via regular internet e-mail transmission. Please note that Teradactyl reserves the right to intercept, monitor, and retain all e-mail messages (including secure e-mail messages) sent to or from its systems as permitted by applicable law.

3 3

[Dovecot] Dict quota timeout error: Has anything changed in the latest versions?
by Alessio Cecchi 26 Feb '13

26 Feb '13

Hi, I'm using dict quota with mysql for track them via SQL query instead of read maildirsize file. Primary quota and enforcing is provided via userdb and is "maildir" type. Since dovecot 2.1.10-13 (but perhaps even before) when a new user log in via POP/IMAP or receive an email for the first time dovecot created the entry for the users in the table "quota" of dovecot database with quota usage and number of messages (before of this login/delivery the user has no entry in the quota table of dovecot DB). After the update to 2.1.14 when a new user login or receive an email for the first time dovecot was unable to create (immediately) the entry in quota table and in the log print these errors: Feb 12 11:03:49 master: Info: Dovecot v2.1.15 starting up (core dumps disabled) Feb 12 11:04:02 auth-worker(31421): Info: mysql(localhost): Connected to database vpopmail Feb 12 11:04:02 pop3-login: Info: Login: user=<alessio(a)domain.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=31422, secured, session=<eK4gJYTV1QB/AAAB> Feb 12 11:04:08 pop3(alessio(a)domain.com): Info: Disconnected: Logged out top=0/0, retr=0/0, del=0/9, size=18618 Feb 12 11:04:41 pop3-login: Info: Login: user=<alessio(a)domain.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=31424, secured, session=<D7F0J4TV1gB/AAAB> Feb 12 11:05:11 pop3(alessio(a)domain.com): Info: Disconnected: Logged out top=0/0, retr=0/0, del=1/9, size=18618 Feb 12 11:05:11 dict: Info: mysql(10.10.3.19): Connected to database dovecot [ here is when I "quit" from telnet session] Feb 12 11:05:41 pop3(alessio(a)domain.com): Error: read(/usr/local/dovecot-2.1/var/run/dovecot/dict) failed: Timeout after 30 seconds Feb 12 11:06:11 pop3(alessio(a)domain.com): Error: read(/usr/local/dovecot-2.1/var/run/dovecot/dict) failed: Timeout after 30 seconds Feb 12 11:06:41 pop3(alessio(a)domain.com): Error: read(/usr/local/dovecot-2.1/var/run/dovecot/dict) failed: Timeout after 30 seconds Feb 12 11:07:11 pop3(alessio(a)domain.com): Error: read(/usr/local/dovecot-2.1/var/run/dovecot/dict) failed: Timeout after 30 seconds Feb 12 11:07:41 pop3(alessio(a)domain.com): Error: read(/usr/local/dovecot-2.1/var/run/dovecot/dict) failed: Timeout after 30 seconds Feb 12 11:08:11 pop3(alessio(a)domain.com): Error: read(/usr/local/dovecot-2.1/var/run/dovecot/dict) failed: Timeout after 30 seconds Feb 12 11:08:41 pop3(alessio(a)domain.com): Error: read(/usr/local/dovecot-2.1/var/run/dovecot/dict) failed: Timeout after 30 seconds [ only now telnet close the session ] This is the telnet session: # telnet 0 110 Trying 0.0.0.0... Connected to 0. Escape character is '^]'. +OK Dovecot ready. user alessio(a)domain.com +OK pass ciao +OK Logged in. list +OK 8 messages: 1 1594 2 1594 3 1594 4 1594 5 1594 6 1594 7 3755 8 3714 . dele 8 +OK Marked to be deleted. quit [ here dovecot wait about 3 minuts before close the connecctions ] +OK Logging out, messages deleted. Connection closed by foreign host. After 3 minutes of wait in the mysql database dovecot insert the entry for the new users: mysql> use dovecot Database changed mysql> select * from quota where username='alessio(a)domain.com'; +--------------------------+---------+----------+ | username | bytes | messages | +--------------------------+---------+----------+ | alessio(a)domain.com | 2144030 | 15 | +--------------------------+---------+----------+ Errors like Error: read(/usr/local/dovecot-2.1/var/run/dovecot/dict) failed: Timeout after 30 seconds were present also before the upgrade but they were occasional, now I had to disable "dict quota". Can this be fixed? My dovecot configuration: # cat /usr/local/dovecot-2.1/etc/dovecot/dovecot-dict-sql.conf.ext connect = host=10.10.3.19 dbname=dovecot user=dovecot password=XXX map { pattern = priv/quota/storage table = quota username_field = username value_field = bytes } map { pattern = priv/quota/messages table = quota username_field = username value_field = messages } map { pattern = shared/expire/$user/$mailbox table = expires value_field = expire_stamp fields { username = $user mailbox = $mailbox } } # dovecot -n # 2.1.15: /usr/local/dovecot-2.1/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-xen-amd64 x86_64 Debian 6.0.6 auth_cache_size = 512 k auth_worker_max_count = 60 default_login_user = nobody dict { acl = mysql:/usr/local/dovecot-2.1/etc/dovecot/dovecot-share-folder.conf sqlquota = mysql:/usr/local/dovecot-2.1/etc/dovecot/dovecot-dict-sql.conf.ext } disable_plaintext_auth = no dotlock_use_excl = no first_valid_gid = 89 first_valid_uid = 89 last_valid_gid = 89 last_valid_uid = 89 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes log_path = /var/log/dovecot/dovecot.log mail_fsync = always mail_location = maildir:~/Maildir mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = quota acl zlib maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mmap_disable = yes namespace { list = children location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u prefix = shared/%%n/ separator = / subscriptions = no type = shared } namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Spam { auto = subscribe special_use = \Junk } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = / } passdb { args = /usr/local/dovecot-2.1/etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { acl = vfile:/usr/local/dovecot-2.1/etc/dovecot/global-acls:cache_secs=300 acl_shared_dict = proxy::acl quota = maildir:UserQuota quota2 = dict:User usage::proxy::sqlquota quota_rule2 = Trash:storage=+100M quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = ~/.dovecot.sieve sieve_default = /usr/local/dovecot-2.1/etc/dovecot/sieve/default.sieve sieve_dir = ~/sieve } protocols = imap pop3 sieve sendmail_path = /var/qmail/bin/sendmail service auth { unix_listener auth-userdb { group = vchkpw mode = 0660 user = vpopmail } } service dict { unix_listener dict { group = vchkpw mode = 0660 user = vpopmail } } service imap-login { service_count = 0 } service managesieve-login { inet_listener sieve { port = 4190 } } service pop3-login { service_count = 0 } service quota-warning { executable = script /usr/local/dovecot-2.1/etc/dovecot/scripts/quota-warning.sh unix_listener quota-warning { user = vpopmail } user = vpopmail } ssl_cert = </etc/ssl/certs/wildcard.net.pem ssl_key = </etc/ssl/private/wildcard.net.key userdb { args = /usr/local/dovecot-2.1/etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lda { log_path = /var/log/dovecot/lda.log mail_plugins = quota acl zlib sieve } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep tb-lsub-flags mail_max_userip_connections = 20 mail_plugins = quota acl zlib imap_quota imap_acl } protocol sieve { mail_max_userip_connections = 10 } protocol pop3 { mail_max_userip_connections = 5 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } -- Alessio Cecchi is: @ ILS -> http://www.linux.it/~alessice/ on LinkedIn -> http://www.linkedin.com/in/alessice Assistenza Sistemi GNU/Linux -> http://www.cecchi.biz/ @ PLUG -> ex-Presidente, adesso senatore a vita, http://www.prato.linux.it

2 4

Re: [Dovecot] Sieve filters on folders, different from INBOX
by Valery V. Sedletski 26 Feb '13

26 Feb '13

>---- Original Message ---- >From: Robert Schetterer <rs(a)sys4.de> >To: dovecot(a)dovecot.org >Sent: Вт, Фев 26, 2013, 5:55 PM >Subject: Re: [Dovecot] Sieve filters on folders, different from INBOX > >Am 26.02.2013 14:20, schrieb Valery V. Sedletski: >> Hi all >> >> Is it possible to configure Dovecot's sieve plugin to act on message >> arrival to folders, other than INBOX? > >sieve is invoked by lda or lmtp not "as arrive in inbox" > > >> I wish to move messages fetched by pop3 fetcher to special folder, or sort > >if you use i.e getmail and maildir it may possible > >look > >http://pyropus.ca/software/getmail/getmailrc-examples I use mpop with a shell wrapper script. The fetcher is working on IMAP server side (not on user side, as usual). So, it is used to pull email from several POP3 servers to our IMAP server. The mail is stored in Maildir++ format. Yes, it is possible to configure fetcher to sort messages to folders by its own means, but I'd like to implement the mail sorting by means of Sieve filters. The user can easy configure filters in webmail interface, then it work with any IMAP client, because it is done on IMAP server side. So, if sieve is invoked by lda, then, probably, I could invoke dovecot-lda from wrapper script on each mail after it is fetched? But then it will be copied to INBOX... -- Is it possible to specify the other folder to deliver to, to the deliver program? > >> outgoing mail to folders, specific > >outgoing mail is smtp, with i.e imap copy to sent folder etc >if you want other folders your imap client should do it > So, I can invoke Sieve interpreter from SMTP server, or process it via dovecot-lda, like in fetcher case? > >try i.e > >https://addons.mozilla.org/de/thunderbird/addon/send-filter/?src=search > > >> to their recipients. >> >> Thanhs in advance, > >i guess what you want in gneral ,is more advanced ( new ) handling >of mail workflow at all, look at list archives for more info on >some stuff you asked, some may work in the future with new features in >imap and sieve, but meanwhile you have to workaround > I used such features with my old POP3 client (it was the good old PMMail in OS/2). But it worked on POP3 client side, with local folders. It seemed to be not very advanced, but I just got a case to implement the same with Dovecot and Exim :) >> >> WBR, >> valery >> >> >> > > > >Best Regards >MfG Robert Schetterer > >-- >[*] sys4 AG > >http://sys4.de, +49 (89) 30 90 46 64 >Franziskanerstraße 15, 81669 München > >Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 >Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer >Aufsichtsratsvorsitzender: Joerg Heidrich

2 1

[Dovecot] Imap-login service count/limits
by Thomas Hummel 26 Feb '13

26 Feb '13

Hello Timo, I'm trying to configure dovecot-2.1.15 master correctly regarding imap-login limits. I want to use service_count=0 and I'm starting with something like this : #default_process_limit = 100 #default_client_limit = 1000 service imap-login { [...] service_count = 0 process_min_avail = 8 vsz_limit = 1024M } -> Does it make sense to set a process_limit if service_count = 0 ? why ? Doesn't service_count = 0 mean that no additionnal imap-login process would be created (except for process_min_avail) ? -> Does it make sense to set process_min_avail <> 0 if service_count = 0 ? why ? and if yes, what's the rule of thumb to find the correct value according to the number of connections estimation ? -> Assuming every client is configured to use STARTTLS and opens by default 5 imap connections, each client would consume 5 of the 1000 default_client_limit, right ? -> is 1024M too high for vsz_limit and may expose to memory leaks ? In other words, what limit should be raised to scale a lot a connections ? Thanks -- Thomas Hummel | Institut Pasteur <hummel(a)pasteur.fr> | Groupe Exploitation et Infrastructure

1 2

[Dovecot] Sieve filters on folders, different from INBOX
by Valery V. Sedletski 26 Feb '13

26 Feb '13

Hi all Is it possible to configure Dovecot's sieve plugin to act on message arrival to folders, other than INBOX? I wish to move messages fetched by pop3 fetcher to special folder, or sort outgoing mail to folders, specific to their recipients. Thanhs in advance, WBR, valery

2 1

[Dovecot] Broken foldernames in mbox
by Peer Heinlein 26 Feb '13

26 Feb '13

I have a mbox-User with some crazy foldernames: -rw------- 1 vmail vmail 19238931 17. Dez 2011 Foo & Co -rw------- 1 vmail vmail 82415 19. Nov 22:06 Foo &- Co Dovecot can't handle that correctly: # dovecot mailbox list -u user Foo & Co Foo & Co dsyncing those folders produces some errors: dsync(awad): Error: Mailboxes don't have unique GUIDs: 228d0731cb186750e9150000a69b85fa is shared by Foo & Co and Foo & Co Peer -- Heinlein Support GmbH Schwedter Str. 8/9b, 10119 Berlin http://www.heinlein-support.de Tel: 030 / 405051-42 Fax: 030 / 405051-19 Zwangsangaben lt. §35a GmbHG: HRB 93818 B / Amtsgericht Berlin-Charlottenburg, Geschäftsführer: Peer Heinlein -- Sitz: Berlin

2 1

[Dovecot] dsync can't sync mbox2mdbox two times
by Peer Heinlein 26 Feb '13

26 Feb '13

Hi, I have a server with Dovecot 2.1.x and I'm trying to convert mbox-storages to mdbox-storages. # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.7 mail_location = mbox:~/mail During the first run everything's okay, but if I run the migration a second time, the later migration is broken: root@mailstore1:/srv/vmail/cklein# rm -R mdbox/ root@mailstore1:/srv/vmail/cklein# doveadm -v -o mail_plugins=zlib sync -u cklein mdbox:/srv/vmail/cklein/mdbox dsync(cklein): Info: test: only in source (guid=0c323b1a430a7350c8590000a69b85fa) dsync(cklein): Info: saved-drafts: only in source (guid=a759b2290cda65504c590000a69b85fa) dsync(cklein): Info: inbox: only in source (guid=a84828310cda65504d590000a69b85fa) dsync(cklein): Info: sent-mail: only in source (guid=a859b2290cda65504c590000a69b85fa) dsync(cklein): Info: spam-mail: only in source (guid=a959b2290cda65504c590000a69b85fa) dsync(cklein): Info: mail-trash: only in source (guid=aa59b2290cda65504c590000a69b85fa) dsync(cklein): Info: Trash: only in source (guid=c0d2c117a785755049640000fd7d4449) dsync(cklein): Info: INBOX.test2: only in source (guid=d6c2d20a2bd013511d030000a69b85fa) dsync(cklein): Info: huhu: only in source (guid=e310ed050ecf1351c37d0000a69b85fa) root@mailstore1:/srv/vmail/cklein# doveadm -v -o mail_plugins=zlib sync -u cklein mdbox:/srv/vmail/cklein/mdbox dsync(cklein): Error: Can't rename mailbox inbox to INBOX: Target mailbox already exists This is what the mbox-folder of the user looks like: root@mailstore1:/srv/vmail/cklein# ls -la mail/ insgesamt 404 drwx------ 4 vmail vmail 4096 26. Feb 10:09 . drwx------ 5 vmail vmail 4096 18. Feb 23:20 .. -rw------- 1 vmail vmail 540 26. Feb 10:09 huhu drwx------ 17 vmail vmail 4096 7. Feb 17:02 .imap -rw------- 1 vmail vmail 97664 26. Feb 10:09 inbox -rw------- 1 vmail vmail 540 26. Feb 10:09 INBOX.test2 drwx------ 2 vmail vmail 4096 26. Feb 09:56 mail -rw------- 1 vmail vmail 18842 26. Feb 10:09 mail-trash -rw------- 1 vmail vmail 2768 26. Feb 10:09 saved-drafts -rw------- 1 vmail vmail 239274 26. Feb 10:09 sent-mail -rw------- 1 vmail vmail 540 26. Feb 10:09 spam-mail -rw------- 1 vmail vmail 78 7. Feb 16:56 .subscriptions -rw------- 1 vmail vmail 598 26. Feb 10:09 test -rw------- 1 vmail vmail 540 26. Feb 10:09 Trash And this is what Dovecot can see accessing the mbox-storage: root@mailstore1:/srv/vmail/cklein# doveadm mailbox list -u cklein test mail-trash saved-drafts sent-mail spam-mail Trash huhu INBOX.test2 inbox mail And this is what Dovecot can see accessing the mdbox-storage: root@mailstore1:/srv/vmail/cklein# doveadm -c /etc/dovecot/mdbox-test.conf mailbox list -u cklein sent-mail saved-drafts Trash spam-mail mail-trash mail huhu test INBOX INBOX.test2 Is it a bug renaming the inbox-Folder to uppercases or do I have a mistake in my mbox-structure? Peer -- Heinlein Support GmbH Schwedter Str. 8/9b, 10119 Berlin http://www.heinlein-support.de Tel: 030 / 405051-42 Fax: 030 / 405051-19 Zwangsangaben lt. §35a GmbHG: HRB 93818 B / Amtsgericht Berlin-Charlottenburg, Geschäftsführer: Peer Heinlein -- Sitz: Berlin

1 1

[Dovecot] 2.2.rc2: quota crash
by Lutz Preßler 26 Feb '13

26 Feb '13

Hello, 2.2.rc2 with configuration as sent with my last mail ("2.2beta2: LSUB broke"). The following sequence crashes with INBOX containing unseen message: * PREAUTH [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE BINARY MOVE SEARCH=FUZZY COMPRESS=DEFLATE QUOTA ACL RIGHTS=texk] Logged in as user A0002 STATUS INBOX (MESSAGES UNSEEN) * STATUS INBOX (MESSAGES 5651 UNSEEN 5) A0002 OK Status completed. A0003 SELECT INBOX * FLAGS (\Answered \Flagged \Deleted \Seen \Draft $Forwarded) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft $Forwarded \*)] Flags permitted. * 5651 EXISTS * 0 RECENT * OK [UNSEEN 5647] First unseen. * OK [UIDVALIDITY 1060286197] UIDs valid * OK [UIDNEXT 42051] Predicted next UID * OK [HIGHESTMODSEQ 6878] Highest A0003 OK [READ-WRITE] Select completed. A0004 UID SEARCH 5651 * SEARCH 42050 A0004 OK Search completed (0.000 secs). A0005 GETQUOTAROOT INBOX imap(4140, lpressl) : Panic: file mail-namespace.c: line 654 (mail_namespace_find): assertion failed: (ns != NULL) imap(4140, lpressl) : Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x6079a) [0x7f617b7f679a] -> /usr/lib/dovecot/libdovecot.so.0(default_fatal_handler+0x32) [0x7f617b7f6882] -> /usr/lib/dovecot/libdovecot.so.0(i_error+0) [0x7f617b7b7eaf] -> /usr/lib/dovecot/libdovecot-storage.so.0(+0x760e2) [0x7f617bac30e2] -> /usr/lib/dovecot/libdovecot-storage.so.0(mail_namespace_find_unalias+0x19) [0x7f617bac3109] -> /usr/lib/dovecot/modules/lib10_quota_plugin.so(+0x5238) [0x7f617a7ec238] -> /usr/lib/dovecot/modules/lib10_quota_plugin.so(quota_get_resource+0xb7) [0x7f617a7ec3b7] -> /usr/lib/dovecot/modules/lib10_quota_plugin.so(quota_root_iter_next+0xf1) [0x7f617a7ece11] -> /usr/lib/dovecot/modules/lib11_imap_quota_plugin.so(+0x1bd5) [0x7f617a5e5bd5] -> /usr/lib/dovecot/imap(command_exec+0x3d) [0x41603d] -> /usr/lib/dovecot/imap() [0x415190] -> /usr/lib/dovecot/imap() [0x41527d] -> /usr/lib/dovecot/imap(client_handle_input+0x11d) [0x4154fd] -> /usr/lib/dovecot/imap(client_input+0x6f) [0x41587f] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x36) [0x7f617b805426] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0xaf) [0x7f617b80647f] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7f617b8053c8] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f617b7bcb03] -> /usr/lib/dovecot/imap(main+0x2a7) [0x41eb07] -> /lib/libc.so.6(__libc_start_main+0xfd) [0x7f617b452c8d] -> /usr/lib/dovecot/imap() [0x40b549] Abgebrochen GETQUOTAROOT directly after SELECT INBOX (without UID SEARCH) does not. No crash without imap_quota plugin either, of course... Regards, Lutz

2 1

[Dovecot] What to back up from a mdbox
by Dag Nygren 26 Feb '13

26 Feb '13

Hi short question to the list: - What parts of a mdbox mail store directory can I leave out from my backup? I can see huge *.cache files for eample. Can these be rebuilt? - Can dovecot recover from a backup "on the fly"? Best Dag

2 1

[Dovecot] Dovecot SASL: SCRAM-SHA-1 Authentication Fails
by Thomas Reim 26 Feb '13

26 Feb '13

Dear all, I use Dovecot SASL (2.1.15) on Ubuntu 12.04 for IMAP authentication and Postfix SASL authentication. I tried to setup SCRAM-SHA-1 as SASL mechanism. This works well on Dovecot's client side towards my OpenLDAP server (with libsasl-2), but fails on the server side (IMAP and SMTP). In the following, there's an extract from Dovecot's log, when using mutt as SMTP client: dovecot: auth: Debug: auth client connected (pid=0) dovecot: auth: Debug: client in: AUTH#0111#011 SCRAM-SHA-1#011 service=smtp#011 nologin#011 lip=192.168.0.65#011 rip=192.168.0.65#011 secured#011 resp=<hidden> dovecot: auth: scram-sha-1(?,192.168.0.65): authzid not supported dovecot: auth: Debug: client passdb out: FAIL#0111 postfix/smtpd[7621]: warning: markaurel.gas.de[192.168.0.65]: SASL SCRAM-SHA-1 authentication failed Here's the log, when using mutt as IMAP client: dovecot: auth: Debug: auth client connected (pid=23409) dovecot: auth: Debug: client in: AUTH#0111#011 SCRAM-SHA-1#011 service=imap#011 secured#011 session=<session ID>#011 lip=192.168.0.65#011 rip=192.168.0.65#011 lport=143#011 rport=36543#011 resp=<hidden> auth: scram-sha-1(?,192.168.0.65,<session ID>): authzid not supported auth: Debug: client passdb out: FAIL#0111 In the following is mutt's output: imap_authenticate: Trying method scram-sha-1 SASL local ip: 192.168.0.65;36543, remote ip:192.168.0.65;143 External SSF: 128 External authentication name: myname mutt_sasl_cb_authname: getting authname for mail.mydomain.local:143 mutt_sasl_cb_authname: getting user for mail.gas.de:143 mutt_sasl_cb_pass: getting password for myname@mail.mydomain.local:143 Authentifiziere (SCRAM-SHA-1)... 4> a0002 AUTHENTICATE SCRAM-SHA-1 <uuencoded string> 4< a0002 NO [AUTHENTICATIONFAILED] Authentication failed. IMAP queue drained imap_auth_sasl: scram-sha-1 failed I've configured mutt, so that it immediately retries the SASL authentication using DIGEST-MD5. This 2nd try is succesful and mutt gets access to the imap/smtp service. Any hints, what's going wrong here? Output of dovecot -n: # 2.1.15 (e33fe1a7bb89): /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-37-generic x86_64 Ubuntu 12.04.2 LTS auth_debug = yes auth_mechanisms = scram-sha-1 digest-md5 plain login auth_verbose = yes base_dir = /var/run/dovecot/ log_timestamp = "%Y-%m-%d %H:%M:%S " mail_gid = vmail mail_location = mdbox:~/mdbox mail_privileged_group = mail mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = . } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } postmaster_address = postmaster@localhost protocols = imap lmtp quota_full_tempfail = yes service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail user = vmail } } service imap-login { inet_listener imap { address = 192.168.0.65 port = 143 } inet_listener imaps { address = 192.168.0.65 port = 993 ssl = yes } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol imap { mail_max_userip_connections = 10 mail_plugins = " mail_log notify" }

2 1

[Dovecot] 2.1.12: Panic: file solr-connection.c: line 547 (solr_connection_post_more)
by Marc Schiffbauer 26 Feb '13

26 Feb '13

Hi all, I am having a problem indexing one of my mailboxes using the solr fts backend in dovecot 2.1.12 For many mailboxes it works just fine, but on one mailbox I currently always get a panic. solr setup: Java: icedtea 6.1.11.5 Solr: 3.6.2 running in tomcat 7.0.32 Command to reproduce error: doveadm index -u my@user badmailbox I already noticed that there have been some solr backend fixes just before 2.1.21 release... Is this another bug in the backend? Any idea? IMO relevant logs line parts: java.io.CharConversionException: Invalid UTF-8 start byte 0xf8 (at char #483989, byte #532382) complete dovecot log: doveadm(my@user): Error: fts_solr: Invalid XML input at 85:198: mismatched tag (near: <html><head><title>Apache Tomcat/7.0.32-gentoo - Error report</title><style><!--H1 {font-family:Tahoma,Arial,sans-serif;color:wh) doveadm(my@user): Panic: file solr-connection.c: line 547 (solr_connection_post_more): assertion failed: (maxfd >= 0) doveadm(my@user): Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0(+0x4bcdb) [0x34fbd53ecdb] -> /usr/lib64/dovecot/libdovecot.so.0(default_fatal_handler+0x3a) [0x34fbd53edb8] -> /usr/lib64/dovecot/libdovecot.so.0(i_fatal+0) [0x34fbd50eeac] -> /usr/lib64/dovecot/lib21_fts_solr_plugin.so(solr_connection_post_more+0x2a4) [0x34fbba81072] -> /usr/lib64/dovecot/lib21_fts_solr_plugin.so(+0x40a5) [0x34fbba7d0a5] -> /usr/lib64/dovecot/lib20_fts_plugin.so(fts_build_mail+0x462) [0x34fbbc8d6dc] -> /usr/lib64/dovecot/lib20_fts_plugin.so(+0xd8c2) [0x34fbbc928c2] -> doveadm(+0x17a30) [0x264ecb7a30] -> doveadm(+0x13a45) [0x264ecb3a45] -> doveadm(+0x14762) [0x264ecb4762] -> doveadm(doveadm_mail_try_run+0x173) [0x264ecb4cfd] -> doveadm(main+0x3e9) [0x264ecbd0d5] -> /lib64/libc.so.6(__libc_start_main+0xfd) [0x34fbd16a48d] -> doveadm(+0x13809) [0x264ecb3809] Aborted complete java exception: Dec 31, 2012 4:12:58 AM org.apache.solr.core.SolrCore execute INFO: [] webapp=/solr-web path=/update params={} status=500 QTime=118 Dec 31, 2012 4:12:58 AM org.apache.solr.common.SolrException log SEVERE: java.lang.RuntimeException: [was class java.io.CharConversionException] Invalid UTF-8 start byte 0xf8 (at char #483989, byte #532382) at com.ctc.wstx.util.ExceptionUtil.throwRuntimeException(ExceptionUtil.java:18) at com.ctc.wstx.sr.StreamScanner.throwLazyError(StreamScanner.java:731) at com.ctc.wstx.sr.BasicStreamReader.safeFinishToken(BasicStreamReader.java:3657) at com.ctc.wstx.sr.BasicStreamReader.getText(BasicStreamReader.java:809) at org.apache.solr.handler.XMLLoader.readDoc(XMLLoader.java:315) at org.apache.solr.handler.XMLLoader.processUpdate(XMLLoader.java:156) at org.apache.solr.handler.XMLLoader.load(XMLLoader.java:79) at org.apache.solr.handler.ContentStreamHandlerBase.handleRequestBody(ContentStreamHandlerBase.java:58) at org.apache.solr.handler.RequestHandlerBase.handleRequest(RequestHandlerBase.java:129) at org.apache.solr.core.SolrCore.execute(SolrCore.java:1376) at org.apache.solr.servlet.SolrDispatchFilter.execute(SolrDispatchFilter.java:365) at org.apache.solr.servlet.SolrDispatchFilter.doFilter(SolrDispatchFilter.java:260) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(Unknown Source) at org.apache.catalina.core.ApplicationFilterChain.doFilter(Unknown Source) at org.apache.catalina.core.StandardWrapperValve.invoke(Unknown Source) at org.apache.catalina.core.StandardContextValve.invoke(Unknown Source) at org.apache.catalina.authenticator.AuthenticatorBase.invoke(Unknown Source) at org.apache.catalina.core.StandardHostValve.invoke(Unknown Source) at org.apache.catalina.valves.ErrorReportValve.invoke(Unknown Source) at org.apache.catalina.valves.AccessLogValve.invoke(Unknown Source) at org.apache.catalina.core.StandardEngineValve.invoke(Unknown Source) at org.apache.catalina.connector.CoyoteAdapter.service(Unknown Source) at org.apache.coyote.http11.AbstractHttp11Processor.process(Unknown Source) at org.apache.coyote.AbstractProtocol$AbstractConnectionHandler.process(Unknown Source) at org.apache.tomcat.util.net.JIoEndpoint$SocketProcessor.run(Unknown Source) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603) at java.lang.Thread.run(Thread.java:679) Caused by: java.io.CharConversionException: Invalid UTF-8 start byte 0xf8 (at char #483989, byte #532382) at com.ctc.wstx.io.UTF8Reader.reportInvalidInitial(UTF8Reader.java:302) at com.ctc.wstx.io.UTF8Reader.read(UTF8Reader.java:188) at com.ctc.wstx.io.ReaderSource.readInto(ReaderSource.java:84) at com.ctc.wstx.io.BranchingReaderSource.readInto(BranchingReaderSource.java:57) at com.ctc.wstx.sr.StreamScanner.loadMore(StreamScanner.java:992) at com.ctc.wstx.sr.BasicStreamReader.readTextSecondary(BasicStreamReader.java:4628) at com.ctc.wstx.sr.BasicStreamReader.readCoalescedText(BasicStreamReader.java:4126) at com.ctc.wstx.sr.BasicStreamReader.finishToken(BasicStreamReader.java:3701) at com.ctc.wstx.sr.BasicStreamReader.safeFinishToken(BasicStreamReader.java:3649) ... 25 more TIA -Marc -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer Aufsichtsratsvorsitzender: Joerg Heidrich

4 9

[Dovecot] Dovecot auth works when tested with doveadm, but fails with Postfix
by Darren Pilgrim 26 Feb '13

26 Feb '13

I have three postfix 2.9.5 servers: chombo, rush, yoshi. Chombo relays to rush and yoshi for outbound email. Outbound relay requires SASL authentication. Rush and yoshi run Dovecot 2.1.12 servers with simple passwd-file backends. If I create a new password hash for chombo's user, houseloki, on either rush or yoshi: # doveadm pw -u houseloki -p <password> {CRAM-MD5}... Then I add that to rush and yoshi's passwd file: houseloki@_auth.bluerosetech.com:{CRAM-MD5}... Then `doveadm reload`, it works fine: # doveadm auth houseloki <password> passdb: houseloki auth succeeded extra fields: user=houseloki(a)_auth.bluerosetech.com So I add that username and password to the smtp_sasl_password_maps hash file on chombo, reload postfix, and then try to relay something from chombo, it fails with rush and yoshi logging warnings like: Feb 19 03:32:33 yoshi postfix/smtpd[75783]: warning: chombo.example.com[2001:db8::2]: SASL DIGEST-MD5 authentication failed: <really long string redacted> Rush and yoshi have other hashes in their passwd files, and if I configure chombo to use one of those, it works fine. Those hashes use digest-md5 and are at least a few years old. I tried that scheme instead of the default cram-md5, as well as several others, but none work. I've poured over the wiki and man pages, but can't find the problem. What am I missing? Why can I not generate new hashes correctly?

2 3

Re: [Dovecot] v2.2.rc1 released
by Michael Grimm 25 Feb '13

25 Feb '13

> Please test and report any bugs found. New in rc1: | doveconf: Error: dlopen(/.../lib/dovecot/settings/libmanagesieve_login_settings.so) failed: /.../lib/dovecot/settings/libmanagesieve_login_settings.so: Undefined symbol "hook_config_parser_begin" | doveconf: Error: dlopen(/.../lib/dovecot/settings/libmanagesieve_settings.so) failed: /.../lib/dovecot/settings/libmanagesieve_settings.so: Undefined symbol "mail_user_setting_parser_info" | doveconf: Error: protocols: Unknown protocol: sieve | doveconf: Fatal: Error in configuration file /.../etc/dovecot/dovecot.conf: protocols: Unknown protocol: sieve Regards, Michael

3 9

[Dovecot] 2.2beta2: LSUB broken
by Lutz Preßler 25 Feb '13

25 Feb '13

Hello, I have some problems with (listing) subscriptions on my test system running 2.2beta2 (compared with 2.1.15, configuration and Maildir content unchanged): With 2.1.15: 0 lsub "" "*" * LSUB () "." "INBOX.Trash" * LSUB () "." "INBOX.in2009" * LSUB () "." "INBOX.test" * LSUB () "." "INBOX.test.test2" * LSUB () "." "INBOX.in2010" * LSUB () "." "INBOX.in" * LSUB () "." "INBOX.virtual.small" * LSUB () "." "INBOX.virtual.sent" * LSUB () "." "INBOX.virtual.allin" * LSUB () "." "INBOX.virtual.week" * LSUB () "." "INBOX.virtual.gmail" 0 OK Lsub completed. With 2.2beta2 (output of doveconf -n attached): 0 lsub "" "*" 0 OK Lsub completed. ... empty list. Same with "list (subscribed)". After disableing the "virtual" namespace in the config, it gets: 0 lsub "" "*" * LSUB () "." Trash * LSUB () "." in2009 * LSUB () "." test * LSUB () "." test.test2 * LSUB () "." in2010 * LSUB () "." in * LSUB () "." INBOX.Trash * LSUB () "." INBOX.in2009 * LSUB () "." INBOX.test * LSUB () "." INBOX.test.test2 * LSUB () "." INBOX.in2010 * LSUB () "." INBOX.in 0 OK Lsub completed. Note mailboxes listed with and without INBOX. prefix. Thanks, Lutz

2 3

[Dovecot] v2.2.rc1 released
by Timo Sirainen 25 Feb '13

25 Feb '13

http://dovecot.org/releases/2.2/rc/dovecot-2.2.rc1.tar.gz http://dovecot.org/releases/2.2/rc/dovecot-2.2.rc1.tar.gz.sig A few fixes since beta2. Also added tcp and tcps (=tcp+ssl) targets for dsync, where the destination needs to be a doveadm-server listener. I'm planning on releasing v2.2.0 in 1-2 weeks if no major problems are found. Please test and report any bugs found. BTW. I've also gone through basically all of my unread emails. If you haven't gotten a reply to something, ask again. Here's again all the biggest changes since v2.1: * When creating home directories, the permissions are copied from the parent directory if it has setgid-bit set. For full details, see http://wiki2.dovecot.org/SharedMailboxes/Permissions * "doveadm auth" command was renamed to "doveadm auth test" * IMAP: ID command now advertises server name as Dovecot by default. It was already trivial to guess this from command replies. * dovecot.index.cache files can be safely accessed only by v2.1.11+. Older versions may think they're corrupted and delete them. * LDA/LMTP: If saving a mail brings user from under quota to over quota, allow it based on quota_grace setting (default: 10% above quota limit). * pop3_lock_session=yes now uses a POP3-only dovecot-pop3-session.lock file instead of actually locking the mailbox (and causing IMAP/LDA/LMTP to wait for the POP3 session to close). * mail_shared_explicit_inbox setting's default switched to "no". * ssl_client_ca_dir setting replaced imapc_ssl_ca_dir and pop3c_ssl_ca_dir settings. + Implemented IMAP MOVE and BINARY extensions + Implemented IMAP CATENATE, URLAUTH and URLAUTH=BINARY extensions (by Stephan Bosch). + Implemented IMAP NOTIFY extension. Requires mailbox_list_index=yes to be enabled. + Redesigned and rewritten dsync. The new design makes the syncing faster, more reliable and more featureful. The new dsync protocol isn't backwards compatible with old dsync versions (but is designed to be forwards compatible with future versions). + All mailbox formats now support per-user message flags for shared mailboxes by using a private index. It can be enabled by adding :INDEXPVT=<path> to mail location. This should be used instead of :INDEX also for Maildir/mbox to improve performance. + Improved mailbox list indexes. They should be usable now, although still disabled by default. + Added LAYOUT=index. The mailbox directories are created using their GUIDs in the filesystem, while the actual GUID <-> name mapping exists only in the index. + LMTP proxy: Implemented XCLIENT extension for passing remote IP address through proxy.

1 0

[Dovecot] Bug when a duplicated file is found
by Angel L. Mateo 25 Feb '13

25 Feb '13

Hello, Last days we had to restore some mailboxes from backup. Our mailboxes are in maildir format and during restore, some duplicated files appeared. The situation is: * A user has messages in his new directory when the backup is made * In some moment after the backup is done, the user accesses to his mailbox, so the message is move to the cur directory. * We restore his mailbox directly to his maildir path, so the message is now at new directory too. When this happens, dovecot detect it and it renames one of the files. This is the reported log: Feb 13 23:08:05 myotis31 dovecot: imap(<user>): Warning: Fixed a duplicate: /home/alumnos/59/122559/Maildir/cur/1360169810.M670208P13643.myotis31,S=6282,W=6409:2, -> 1360793285.M721935P29136.myotis31 The problem with this is that we are using zlib plugin so messages are compressed. When the rename is done, the rename is to a name without the S=XXXX field (neither the W=XXX, although this field is less sensible), so the result is that user's can't access to any message after this one. I think than in this situation, rename one of the files is a good solution (although it provokes duplicate mails, but this an expected/acceptable situation after the restore), but the rename should maintain the S= and W= fields (and even other maildir flags). -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868889150 Fax: 868888337

3 3

[Dovecot] SSL errors for just one client after updaing both dovecot and openssl
by Charles Marcus 25 Feb '13

25 Feb '13

Hi all, Ok, I have a strange problem after updating both dovecot and openssl... OpenSSL was 1.0.0j, now updated to 1.0.1c Dovecot was 2.1.13, now updated to 2.1.15 I'm getting a bunch of lines like the following: Feb 23 10:48:01 myhost dovecot: imap-login: Disconnected (no auth attempts in 29 secs): user=<>, rip=#.#.#.#, lport=993, TLS handshaking: SSL_accept() syscall failed: Connection reset by peer, session=<In+cO2bWngCthJz2> where only the session id (and number of seconds for no auth attempts) is different... This is happening for only the one client. All other clients - I've counted about 25 so far - are working fine. Anyone have any ideas? I can't believe it is a generic openssl problem, since it is only affecting the one client. I've contacted him and asked him to reboot any/all devices that connect to our mail to see if that helps... -- Best regards, */Charles/*

3 3

[Dovecot] understanding namespace configuration
by btb＠bitrate.net 25 Feb '13

25 Feb '13

i'm a little confused about namespace configuration. reading http://wiki2.dovecot.org/Namespaces , and looking at the examples, it seems that when a namespace is declared, you can either do "namespace { ..." or "namespace foo { ..." - i'm having trouble finding clarity on the significance of "foo" though. it would appear it's not required, but then what is its purpose? what does it mean? does it imply something? it's also unclear to me how to create the "default private namespace". i see that there are three types of namespaces, but the list of namespace settings doesn't seem to include a parameter to set the namespace type. what am i missing? it's also not quite clear how to denote a namespace as "default". from coming across this thread [ http://mailman2.u.washington.edu/pipermail/imap-protocol/2010-May/001077.ht… ] it would indicate in theory that a namespace is denoted as default by using an empty prefix - but i wasn't able to find corroboration of that in dovecot's documentation. thanks -ben

2 3

[Dovecot] dovecot-2.2: broken domain quota calculation
by Evgeny Basov 25 Feb '13

25 Feb '13

Hello. Used next version of dovecot: # dovecot --version 20130205 (03a0af22100d+) Quota configuration: plugin { quota = dict:Domain quota:%d:redis:host=127.0.0.1:prefix=domain/ quota_rule = *:storage=0 quota_rule2 = Trash:storage=+5%% quota2 = dict:User quota::redis:host=127.0.0.1:prefix=user/ quota2_rule = *:storage=0 quota2_rule2 = Trash:storage=+5%% } Problem: incorrect quota calculations. Dovecot gets size and messages count of all domain from last user in list. In 2.1 works fine. Steps to reproduce problem: 1. install dovecot 2. create over 50 users with e-mails 3. execute: doveadm quota recalc -A 4. execute: doveadm quota get -A 5. get count of all users message: sum in some application result of execution doveadm quota get -A | grep MESSAGE | grep 'User quota' | awk '{print $5}' (139443 messages) 6. get size of all users message: sum in some application result of execution doveadm quota get -A | grep STORAGE | grep 'User quota' | awk '{print $5}' (2304399 Kb) 7. look at some user user(a)example.org Domain quota STORAGE 82408 51200000 0 user(a)example.org Domain quota MESSAGE 1078 - 0 user(a)example.org User quota STORAGE 0 209715200 0 user(a)example.org User quota MESSAGE 0 - 0 and see 1078 messages and 82408 Kb in domain quota 8. look at last user in list z(a)example.org Domain quota STORAGE 82408 51200000 0 z(a)example.org Domain quota MESSAGE 1078 - 0 z(a)example.org User quota STORAGE 82408 209715200 0 z(a)example.org User quota MESSAGE 1078 - 0 and see matching values.

2 2

[Dovecot] Possible sort optimization (?)
by Michael M Slusarz 25 Feb '13

25 Feb '13

Maybe this is just noise... but I can reproduce this fairly reliably. Mailbox with 21,000+ messages This query: a UID SORT RETURN (ALL COUNT) (DATE) UTF-8 SUBJECT "foo" is always about 10 percent slower than this split query (I've done this 4-5 times, and the numbers are similar): a UID SEARCH RETURN (SAVE) CHARSET UTF-8 SUBJECT "foo" b UID SORT RETURN (ALL COUNT) (DATE) UTF-8 UID $ (The particular query I used matched 5 messages out of the 21,000+) My not-very-scientific benchmarking process: 1.) Stop dovecot process 2.) Delete all dovecot index files for that mailbox 3.) Flush linux paging cache (sync && echo 3 > /proc/sys/vm/drop_caches) 4.) Restart dovecot 5.) Access dovecot via command-line (PREAUTH) 6.) SELECT mailbox 7.) Issue command(s) Could be a potential area for performance improvement or could simply be lazy benchmarking. michael

2 2

[Dovecot] Problem with the command hooks api
by Tony 24 Feb '13

24 Feb '13

I have been trying to use the command hook api in an experimental plugin I have written. The hook is registered using the command_hook_register function, and for most commands my hook functions get called once as expected. But when the client uses one of the "UID" commands (e.g. "UID FETCH" ) the hook functions are executed twice. I am using dovecot version 2.1.12. Am I correct in thinking this is a bug? If I am wrong and this is the intended behaviour, how should I detect whether the hook function call is the first or second for a client's command (in particular for the 'post command' hook)? Assuming it is a bug, I modified the code in the command_exec function to stop the second hook call, a patch for this is below. This appears to apply to later dovecot releases as well. I am happy for this code to be included in future releases of dovecot. Thanks, Tony. diff -ur -x .deps -x Makefile dovecot-2.1.12-orig/src/imap/imap-commands.c dovecot-2.1.12-mod/src/imap/imap-commands.c --- dovecot-2.1.12-orig/src/imap/imap-commands.c 2012-03-22 12:59:17.000000000 +0000 +++ dovecot-2.1.12-mod/src/imap/imap-commands.c 2013-02-20 17:15:50.000000000 +0000 @@ -38,7 +38,7 @@ { "FETCH", cmd_fetch, COMMAND_FLAG_USES_SEQS }, { "SEARCH", cmd_search, COMMAND_FLAG_USES_SEQS }, { "STORE", cmd_store, COMMAND_FLAG_USES_SEQS }, - { "UID", cmd_uid, 0 }, + { "UID", cmd_uid, COMMAND_FLAG_HOOKS_DELAY }, { "UID COPY", cmd_copy, COMMAND_FLAG_BREAKS_SEQS }, { "UID FETCH", cmd_fetch, COMMAND_FLAG_BREAKS_SEQS }, { "UID SEARCH", cmd_search, COMMAND_FLAG_BREAKS_SEQS }, @@ -142,12 +142,20 @@ { const struct command_hook *hook; bool ret; + bool exec_hooks = FALSE; - array_foreach(&command_hooks, hook) - hook->pre(cmd); + if ( !(cmd->cmd_flags & COMMAND_FLAG_HOOKS_DELAY)) { + exec_hooks = TRUE; + array_foreach(&command_hooks, hook) + hook->pre(cmd); + } ret = cmd->func(cmd); - array_foreach(&command_hooks, hook) - hook->post(cmd); + + if (exec_hooks != FALSE) + { + array_foreach(&command_hooks, hook) + hook->post(cmd); + } return ret; } diff -ur -x .deps -x Makefile dovecot-2.1.12-orig/src/imap/imap-commands.h dovecot-2.1.12-mod/src/imap/imap-commands.h --- dovecot-2.1.12-orig/src/imap/imap-commands.h 2011-12-13 11:35:28.000000000 +0000 +++ dovecot-2.1.12-mod/src/imap/imap-commands.h 2013-02-20 17:15:44.000000000 +0000 @@ -30,7 +30,9 @@ Dovecot internally returns it for all kinds of commands, but unfortunately RFC 5530 specifies it only for "delete something" operations. */ - COMMAND_FLAG_USE_NONEXISTENT = 0x10 + COMMAND_FLAG_USE_NONEXISTENT = 0x10, + /* Set when need to delay command hook function calls due to recursive command_exec() */ + COMMAND_FLAG_HOOKS_DELAY = 0x20 }; struct command {

2 1

[Dovecot] LMTP logging
by Peter Rindfuss 24 Feb '13

24 Feb '13

Hi, Is there a way (in Dovecot 2.1.14) to sent LMTP log entries and IMAP log entries to different files? I know I could achieve this with syslog-ng, but as LDA has a log file of its own, I am wondering if this is possible with LMTP as well. I apologize if I missed something in the wiki. Thanks, Peter

3 5

[Dovecot] Problem importing mail from maildir directory
by Thomas Koeller 24 Feb '13

24 Feb '13

Hi, I am trying to import mail from a maildir directory into dovecot using the 'doveadm import' command: ----------- bash-4.0$ doveadm -D import -u marion maildir:${HOME}/Mail '' ALL doveadm(marion): Debug: Loading modules from directory: /usr/lib64/dovecot doveadm(marion): Debug: Module loaded: /usr/lib64/dovecot/lib10_quota_plugin.so doveadm(marion): Debug: Loading modules from directory: /usr/lib64/dovecot/doveadm doveadm(marion): Debug: Skipping module doveadm_acl_plugin, because dlopen() failed: /usr/lib64/dovecot/doveadm/lib10_doveadm_acl_plugin.so: undefined symbol: acl_user_module (this is usually intentional, so just ignore this message) doveadm(marion): Debug: Skipping module doveadm_expire_plugin, because dlopen() failed: /usr/lib64/dovecot/doveadm/lib10_doveadm_expire_plugin.so: undefined symbol: expire_set_deinit (this is usually intentional, so just ignore this message) doveadm(marion): Debug: Module loaded: /usr/lib64/dovecot/doveadm/lib10_doveadm_quota_plugin.so doveadm(marion): Debug: Skipping module doveadm_zlib_plugin, because dlopen() failed: /usr/lib64/dovecot/doveadm/lib10_doveadm_zlib_plugin.so: undefined symbol: i_stream_create_deflate (this is usually intentional, so just ignore this message) doveadm(marion): Debug: Skipping module doveadm_fts_plugin, because dlopen() failed: /usr/lib64/dovecot/doveadm/lib20_doveadm_fts_plugin.so: undefined symbol: fts_backend_rescan (this is usually intentional, so just ignore this message) doveadm(marion): Debug: Effective uid=10001, gid=10000, home=/home/marion doveadm(marion): Debug: quota: No quota setting - plugin disabled doveadm(marion): Debug: maildir++: root=/home/marion/Mail, index=, control=, inbox=/home/marion/Mail, alt= doveadm(marion): Debug: Effective uid=10001, gid=10000, home=/home/marion doveadm(marion): Debug: quota: No quota setting - plugin disabled doveadm(marion): Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=mbox:~/mail:INBOX=/var/spool/mail/marion doveadm(marion): Debug: fs: root=/home/marion/mail, index=, control=, inbox=/var/spool/mail/marion, alt= ----------- What I get is - no mails are imported - no error messages are output - nothing is written to the system log in other words, nothing happens at all. Any hints? tk

2 1

[Dovecot] make install fails on Solaris 10
by Henrik Johansson 24 Feb '13

24 Feb '13

Hello, I am trying to build dovecot-2.1.15 on Solaris 10 update 10 with Solaris Studio 12.3 and get this error: /bin/bash ../../libtool --tag=CC --mode=link /opt/SUNWspro/bin/cc -fast -xipo=2 -I/usr/sfw/include -I/usr/sfw/include -no-undefined -o doveadm doveadm-mail.o doveadm-mail-altmove.o doveadm-mail-expunge.o doveadm-mail-fetch.o doveadm-mail-import.o doveadm-mail-index.o doveadm-mail-iter.o doveadm-mail-mailbox.o doveadm-mail-mailbox-status.o doveadm-mail-copymove.o doveadm-mailbox-list-iter.o doveadm-mail-search.o doveadm-mail-server.o doveadm-print.o doveadm-settings.o doveadm-util.o server-connection.o doveadm.o doveadm-auth.o doveadm-director.o doveadm-dump.o doveadm-dump-dbox.o doveadm-dump-index.o doveadm-dump-log.o doveadm-dump-mailboxlog.o doveadm-dump-thread.o doveadm-instance.o doveadm-kick.o doveadm-log.o doveadm-master.o doveadm-mount.o doveadm-mutf7.o doveadm-penalty.o doveadm-print-flow.o doveadm-print-pager.o doveadm-print-tab.o doveadm-print-table.o doveadm-proxy.o doveadm-pw.o doveadm-sis.o doveadm-stats.o doveadm-who.o dsync/libdsync.a ../auth/libpassword.a ../lib-ntlm/libntlm.a ../lib-otp/libotp.a ../../src/lib-storage/libdovecot-storage.la -R/usr/sfw/lib -L/usr/sfw/lib -lssl -lcrypto -lsocket -lnsl -ldl ../../src/lib-dovecot/libdovecot.la -export-dynamic -lnsl -lsocket -lrt -lsendfile libtool: link: /opt/SUNWspro/bin/cc -fast -xipo=2 -I/usr/sfw/include -I/usr/sfw/include -o .libs/doveadm doveadm-mail.o doveadm-mail-altmove.o doveadm-mail-expunge.o doveadm-mail-fetch.o doveadm-mail-import.o doveadm-mail-index.o doveadm-mail-iter.o doveadm-mail-mailbox.o doveadm-mail-mailbox-status.o doveadm-mail-copymove.o doveadm-mailbox-list-iter.o doveadm-mail-search.o doveadm-mail-server.o doveadm-print.o doveadm-settings.o doveadm-util.o server-connection.o doveadm.o doveadm-auth.o doveadm-director.o doveadm-dump.o doveadm-dump-dbox.o doveadm-dump-index.o doveadm-dump-log.o doveadm-dump-mailboxlog.o doveadm-dump-thread.o doveadm-instance.o doveadm-kick.o doveadm-log.o doveadm-master.o doveadm-mount.o doveadm-mutf7.o doveadm-penalty.o doveadm-print-flow.o doveadm-print-pager.o doveadm-print-tab.o doveadm-print-table.o doveadm-proxy.o doveadm-pw.o doveadm-sis.o doveadm-stats.o doveadm-who.o dsync/libdsync.a ../auth/libpassword.a ../lib-ntlm/libntlm.a ../lib-otp/libotp.a ../../src/lib-storage/.libs/libdovecot-storage.so -L/usr/sfw/lib /home/henrikj/Build/dovecot-2.1.15/src/lib-dovecot/.libs/libdovecot.so -lssl -lcrypto -ldl ../../src/lib-dovecot/.libs/libdovecot.so -lnsl -lsocket -lrt -lsendfile -R/opt/HNKSdovecot/lib/dovecot -R/usr/sfw/lib ld: warning: file ../../src/lib-dovecot/.libs/libdovecot.so: linked to /home/henrikj/Build/dovecot-2.1.15/src/lib-dovecot/.libs/libdovecot.so: attempted multiple inclusion of file ld: warning: file ../../src/lib-dovecot/.libs/libdovecot.so: linked to /home/henrikj/Build/dovecot-2.1.15/src/lib-dovecot/.libs/libdovecot.so: attempted multiple inclusion of file Undefined first referenced symbol in file $XBKaiwbjOCHRV5w.array_append_array_i..L93 dsync/libdsync.a(dsync-brain.o) $XBKaiwbjOCHRV5w.array_append_array_i..L94 dsync/libdsync.a(dsync-brain.o) $XBKaiwbjOCHRV5w.array_append_array_i..L95 dsync/libdsync.a(dsync-brain.o) ld: fatal: symbol referencing errors. No output written to .libs/doveadm *** Error code 2 make: Fatal error: Command failed for target `doveadm' Current working directory /home/henrikj/Build/dovecot-2.1.15/src/doveadm *** Error code 1 Any suggestions? Thanks Henrik

1 0

Re: [Dovecot] problems with imaps
by Joseph Tam 23 Feb '13

23 Feb '13

On 2013-02-22, Matthias Leopold wrote: > with thunderbird 10.0.12 i can't connect to port 993 and get errors in > the logs like > > TLS: SSL_read() failed: error:14094412:SSL > routines:SSL3_READ_BYTES:sslv3 alert bad certificate > > (certificate generated by dovecot mkcert.sh) I haven't come across any problems with our use of self-signed certificates, but I run the latest 2.1.x dovecot so maybe there's some SSL changes between our version and your's. The fact that the same certificate works for other clients, and also for TLS on Thunderbird seem to suggest Thunderbird is fumbling it. But maybe you can try the command diagnostic from the command line "openssl s_client -connect yourserver:993 ..." or use one of the online certificate checkers to get some useful diagnostics. > TLS: SSL_read() failed: error:14094418:SSL > routines:SSL3_READ_BYTES:tlsv1 alert unknown ca This error entry pops up in my logs once in a while. I think the error might be misleading since the error message happen in the middle of a long sequence of successful connections. Also check that the client is actually using the right security mode (not TLS or clear), perhaps by doing a network snoop. Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] doveadm user error messages
by Thomas Leuxner 22 Feb '13

22 Feb '13

I use 'doveadm user' in some scripts and the exit codes are fine for my purposes. During tests it transpired that Dovecot 2.1 would give an error message when querying for non-existent users. Dovecot 2.2 just exits without a word. Not sure this is intended behaviour: $ doveadm user foo $ echo $? 67 $ id foo id: foo: No such user Regards Thomas

2 2

[Dovecot] assert in mail-transaction-log-file.c
by Anton Yuzhaninov 22 Feb '13

22 Feb '13

I setup new server with dovecot 2.1.12 and mboxes from backup (moboxes was used with dovecot 1.1.6). OS: FreeBSD 8.3-STABLE, amd64. All index files from dovecot 1.1.6 has been deleted. Some times dovecot processes aborted. E. g. Jan 25 03:01:52 ost dovecot: lda(user(a)example.ru): Panic: file mail-transaction-log-file.c: line 1694 (mail_transaction_log_file_map): assertion failed: (file->buffer != NULL) (gdb) bt #0 0x0000000800bd610c in kill () from /lib/libc.so.7 #1 0x0000000800bd4f0b in abort () from /lib/libc.so.7 #2 0x000000080099b339 in default_fatal_finish (type=72898, status=0) at failures.c:191 #3 0x000000080099b3be in i_syslog_fatal_handler (ctx=<value optimized out>, format=<value optimized out>, args=<value optimized out>) at failures.c:413 #4 0x000000080099a8a3 in i_panic (format=<value optimized out>) at failures.c:263 #5 0x000000080081bdb6 in mail_transaction_log_file_map (file=0x801670e00, start_offset=40, end_offset=18446744073709551615) at mail-transaction-log-file.c:1694 #6 0x000000080081da41 in mail_transaction_log_view_set (view=0x801654a80, min_file_seq=1, min_file_offset=40, max_file_seq=2, max_file_offset=18446744073709551615, reset_r=0x7fffffffbedf) at mail-transaction-log-view.c:228 #7 0x000000080081519d in mail_index_sync_map (_map=0x801670b08, type=MAIL_INDEX_SYNC_HANDLER_HEAD, force=false) at mail-index-sync-update.c:950 #8 0x0000000800805be0 in mail_index_map (index=0x801670a80, type=MAIL_INDEX_SYNC_HANDLER_HEAD) at mail-index-map-read.c:415 #9 0x0000000800800bde in mail_index_refresh (index=<value optimized out>) at mail-index.c:735 #10 0x00000008007b2344 in mbox_sync_header_refresh (mbox=0x801680840) at mbox-sync.c:1652 #11 0x00000008007b24e2 in mbox_sync_has_changed_full (mbox=0x801680840, leave_dirty=true, empty_r=0x7fffffffe2e8) at mbox-sync.c:1729 #12 0x00000008007ae1a7 in mbox_save_begin (_ctx=0x80161a500, input=0x801669660) at mbox-save.c:296 #13 0x00000008018025ae in notify_save_begin (ctx=0x80161a500, input=0x801669660) at notify-storage.c:130 #14 0x00000008014261fd in quota_save_begin (ctx=0x80161a500, input=0x801669660) at quota-storage.c:251 #15 0x00000008007cfecc in mailbox_save_begin (ctx=0x7fffffffe3d0, input=0x801669660) at mail-storage.c:1652 #16 0x00000008007ca48d in mail_storage_copy (ctx=0x80161a500, mail=0x801637040) at mail-copy.c:68 #17 0x000000080180269d in notify_copy (ctx=0x80161a500, mail=0x801637040) at notify-storage.c:105 #18 0x00000008014262f6 in quota_copy (ctx=0x80161a500, mail=0x801637040) at quota-storage.c:200 #19 0x00000008007cfe04 in mailbox_copy (_ctx=<value optimized out>, mail=0x801637040) at mail-storage.c:1721 #20 0x0000000801b4b706 in act_store_execute (action=<value optimized out>, aenv=0x8016a3070, tr_context=<value optimized out>) at sieve-actions.c:551 #21 0x0000000801b428de in sieve_result_execute (result=0x8016a3040, keep=0x0) at sieve-result.c:1117 #22 0x0000000801b52d5a in sieve_execute (sbin=<value optimized out>, msgdata=<value optimized out>, senv=<value optimized out>, ehandler=<value optimized out>, flags=<value optimized out>, keep=0x0) at sieve.c:508 #23 0x0000000801a0aec6 in lda_sieve_deliver_mail (mdctx=0x7fffffffe970, storage_r=0x7fffffffe8e8) at lda-sieve-plugin.c:424 #24 0x0000000800651735 in mail_deliver (ctx=0x7fffffffe970, storage_r=0x7fffffffe8e8) at mail-deliver.c:390 #25 0x0000000000402ffa in main (argc=6, argv=0x7fffffffea78) at main.c:434 (gdb) f 5 (gdb) p *file $1 = {log = 0x8016463d0, next = 0x0, refcount = 5, filepath = 0x801620420 "(in-memory index).log", fd = -1, st_ino = 13919248, st_dev = 109, last_mtime = 1359082912, last_size = 0, hdr = {major_version = 1 '\001', minor_version = 2 '\002', hdr_size = 40, indexid = 1359082912, file_seq = 2, prev_file_seq = 0, prev_file_offset = 0, create_stamp = 1359082912, initial_modseq = 0, compat_flags = 1 '\001', unused = "\000\000", unused2 = 0}, mmap_buffer = {data = 0x0, used = 0, priv = {0x0, 0x0, 0x0, 0x0, 0x0}}, buffer = 0x0, buffer_offset = 0, mmap_base = 0x0, mmap_size = 0, sync_offset = 40, sync_highest_modseq = 0, saved_tail_offset = 0, max_tail_offset = 0, saved_tail_sync_offset = 0, index_deleted_offset = 0, index_undeleted_offset = 0, modseq_cache = {{offset = 0, highest_modseq = 0}, {offset = 0, highest_modseq = 0}, { offset = 0, highest_modseq = 0}, {offset = 0, highest_modseq = 0}, {offset = 0, highest_modseq = 0}, {offset = 0, highest_modseq = 0}, {offset = 0, highest_modseq = 0}, { offset = 0, highest_modseq = 0}, {offset = 0, highest_modseq = 0}, {offset = 0, highest_modseq = 0}}, file_lock = 0x0, lock_created = 0, locked = 0, locked_sync_offset_updated = 0, corrupted = 0} Also same aborts can happen in imap processes: Jan 24 16:35:04 ost dovecot: imap(user(a)example.ru): Panic: file mail-transaction-log-file.c: line 1694 (mail_transaction_log_file_map): assertion failed: (file->buffer != NULL) -- Anton Yuzhaninov

2 2

[Dovecot] Ubuntu-12.04 packages for latest Dovecot release
by 3.listas＠adminlinux.com.br 22 Feb '13

22 Feb '13

Hi, Does anyone here know a trusted package repository for Ubuntu LTS which has always the latest version of Dovecot? Thanks ! -- Thiago Henrique adminlinux.com.br

3 4

[Dovecot] problems with imaps
by Matthias Leopold 22 Feb '13

22 Feb '13

hi, i'm using dovecot 1.2.15 with self signed certificates using starttls on ports 110/143 works ok with thunderbird 10.0.12 (and i guess most other clients) using imaps on port 993 works with outlook 2002. with thunderbird 10.0.12 i can't connect to port 993 and get errors in the logs like TLS: SSL_read() failed: error:14094412:SSL routines:SSL3_READ_BYTES:sslv3 alert bad certificate (certificate generated by dovecot mkcert.sh) or TLS: SSL_read() failed: error:14094418:SSL routines:SSL3_READ_BYTES:tlsv1 alert unknown ca (certificate generated by own openssl cmdline) i know that a lot of information is missing, but since this looks like a more general problem i dare to ask for help before posting more config details thx matthias

3 3

[Dovecot] High CPU Usage with 2.2
by Odhiambo Washington 22 Feb '13

22 Feb '13

I am seeing a rather high CPU usage with 2.2 now: last pid: 30725; load averages: 4.58, 27.36, 25.49 up 0+15:36:12 16:02:53 103 processes: 4 running, 98 sleeping, 1 zombie CPU: 34.5% user, 0.0% nice, 65.4% system, 0.2% interrupt, 0.0% idle Mem: 602M Active, 1767M Inact, 254M Wired, 6116K Cache, 112M Buf, 490M Free Swap: 5900M Total, 5900M Free PID USERNAME THR PRI NICE SIZE RES STATE C TIME WCPU COMMAND 30569 mailnull 1 112 0 4956K 2784K RUN 0 1:27 68.65% pop3 30704 mailnull 1 108 0 4956K 2876K CPU0 0 0:10 57.37% pop3 30712 mailnull 1 106 0 4944K 2780K RUN 1 0:07 45.26% pop3 30636 root 1 44 0 3696K 1784K CPU1 1 0:00 0.10% top My entire configuration - http://pastebin.com/XGZb5kKN -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ I can't hear you -- I'm using the scrambler.

2 3

[Dovecot] pop3_lock_session and mdbox format
by Ewald Dieterich 22 Feb '13

22 Feb '13

Setting "pop3_lock_session = yes" in the configuration has no effect when I use Dovecot 2.1.13 with the mdbox format. A second POP3 connection to the same mailbox is still allowed. Grepping for MAILBOX_FLAG_KEEP_LOCKED in the source code shows that POP3 session locking only works for the Maildir and mbox formats. Is it possible to enable it for the mdbox format, as well? Ewald

2 1

[Dovecot] environment for dovecot auth
by Emmanuel Dreyfus 22 Feb '13

22 Feb '13

Hi Is there a way to set environment variables for the auth process? All I found for now is to replace it by a shell script that sets variables and then launch the real auth, but I wonder if there is a better way. -- Emmanuel Dreyfus manu(a)netbsd.org

2 1

[Dovecot] [PATCH] support for NetBSD 6.0 libquota
by manu＠netbsd.org 22 Feb '13

22 Feb '13

Hi NetBSD 6.0 introduced a new improved quota subsystem and an unified API (libquota) to handle the new and old quota implementation. dovecot is unable to use the new quota implementation right now, and will even fail to build with the old quota API on NetBSD 6.0: Here are dovecot patches to support NetBSD libquota: http://ftp.espci.fr/shadow/manu/dovecot-libquota.tgz -- Emmanuel Dreyfus http://hcpnet.free.fr/pubz manu(a)netbsd.org

2 1

[Dovecot] Trouble with expire plugin
by Gedalya 22 Feb '13

22 Feb '13

Hi all, Maybe someone here can help me with this problem, not sure if this is a configuration issue or an actual bug. my daily cron job says: #!/bin/sh doveadm expunge -A mailbox Junk savedbefore 14d doveadm expunge -A mailbox Trash savedbefore 30d doveadm expunge -A mailbox "Trash.*" savedbefore 30d But it hasn't been deleting any messages in a long time, I'm not sure when it stopped working. I've also noticed that it does delete matching rows in the expires database (expire_stamp < savedbefore days). Furthermore, rows are deleted even when running doveadm search, and regardless of the mailbox column, i.e. even when != the mailbox name being searched! Anyway why should doveadm search delete rows in the expires database? The database is mysql. ---- dovecot -n ---- # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-0.bpo.3-amd64 x86_64 Debian 6.0.6 auth_default_realm = xxxxxxx.com auth_mechanisms = plain login cram-md5 auth_verbose = yes auth_verbose_passwords = plain default_client_limit = 8096 dict { expire = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext } disable_plaintext_auth = no mail_gid = vmail mail_plugins = quota expire listescape mail_uid = vmail managesieve_sieve_capability = fileinto envelope encoded-character subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables mailbox date ihave namespace { inbox = yes location = prefix = separator = / type = private } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { antispam_backend = pipe antispam_pipe_program = /usr/bin/ssh antispam_pipe_program_args = -l;spamd;-i;/etc/dovecot/sareport.key;mx1.xxxxxxx.com antispam_pipe_program_notspam_arg = revoke antispam_pipe_program_spam_arg = report antispam_pipe_tmpdir = /tmp antispam_spam = Junk antispam_trash_pattern_ignorecase = trash;Deleted * autocreate = Trash autocreate2 = Junk autocreate3 = Drafts autocreate4 = Sent autosubscribe = Trash autosubscribe2 = Junk autosubscribe3 = Drafts autosubscribe4 = Sent expire = Trash expire2 = Trash.* expire3 = Junk expire_dict = proxy::expire quota = dict:user::proxy::quota quota_rule = *:storage=2G quota_rule2 = Trash:storage=+250M quota_rule3 = Junk:ignore quota_warning = storage=99%% quota-warning 99 %u quota_warning2 = storage=95%% quota-warning 95 %u sieve = ~/.dovecot.sieve sieve_before = /var/local/lib/dovecot/sieve/global/fileinto-spam.sieve sieve_dir = ~/sieve sieve_extensions = -vacation -body -reject -enotify -environment -virustest -spamtest sieve_max_actions = 32 sieve_max_redirects = 4 sieve_max_script_size = 10K sieve_quota_max_scripts = 10 } postmaster_address = postmaster(a)xxxxxxx.com protocols = imap pop3 lmtp sieve service auth-worker { user = $default_internal_user } service auth { client_limit = 20480 unix_listener auth-userdb { group = root mode = 0600 user = vmail } } service dict { unix_listener dict { mode = 0600 user = vmail } } service imap-login { process_min_avail = 4 service_count = 0 vsz_limit = 128 M } service imap { process_limit = 10240 } service lmtp { inet_listener lmtp { address = 0.0.0.0 port = 7025 } } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 0 vsz_limit = 128 M } service pop3-login { process_min_avail = 4 service_count = 0 vsz_limit = 128 M } service pop3 { process_limit = 4096 } service quota-warning { executable = script /usr/local/bin/quota-warning unix_listener quota-warning { user = vmail } user = vmail } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } verbose_proctitle = yes protocol lmtp { mail_plugins = quota expire listescape sieve } protocol lda { mail_plugins = quota expire listescape sieve } protocol imap { mail_max_userip_connections = 25 mail_plugins = quota expire listescape autocreate imap_quota antispam ssl_cert = </etc/dovecot/imap.xxxxxxx.com.crt ssl_key = </etc/dovecot/imap.xxxxxxx.com.key } protocol sieve { mail_max_userip_connections = 10 } protocol pop3 { mail_max_userip_connections = 10 mail_plugins = quota expire listescape pop3_fast_size_lookups = yes pop3_lock_session = no pop3_no_flag_updates = yes pop3_reuse_xuidl = yes pop3_save_uidl = no pop3_uidl_format = %08Xu%08Xv ssl_cert = </etc/dovecot/pop.xxxxxxx.com.crt ssl_key = </etc/dovecot/pop.xxxxxxx.com.key } in dovecot-sql.conf.ext I have: iterate_query = SELECT userid as user, domain FROM email where deleted=0 ---- dovecot-dict-sql.conf.ext ---- connect = host=localhost dbname=email user=email map { pattern = priv/quota/storage table = quota username_field = username value_field = bytes } map { pattern = priv/quota/messages table = quota username_field = username value_field = messages } map { pattern = shared/expire/$user/$mailbox table = expires value_field = expire_stamp fields { username = $user mailbox = $mailbox } }

3 5

[Dovecot] patch to fix binary attachment indexing
by Mike Abbott 22 Feb '13

22 Feb '13

FTS indexing of binary attachments is broken in dovecot-2.1.15: the binary data which fts_build_mail_real() sends to fts_build_body_block() (which sends it to fts_backend_update_build_more()) is garbled. This patch ungarbles it but I’m not positive it’s the best fix. --- dovecot-2.1.15/src/plugins/fts/fts-build-mail.c 2012-11-27 02:07:27.000000000 -0600 +++ dovecot/src/plugins/fts/fts-build-mail.c 2013-02-21 19:48:15.000000000 -0600 @@ -178,7 +178,8 @@ *binary_body_r = TRUE; key.type = FTS_BACKEND_BUILD_KEY_BODY_PART_BINARY; } - if (ctx->body_parser == NULL) + if (ctx->body_parser == NULL && + key.type != FTS_BACKEND_BUILD_KEY_BODY_PART_BINARY) ctx->body_parser = fts_parser_text_init(); key.body_content_type = content_type; key.body_content_disposition = ctx->content_disposition;

2 2

[Dovecot] error running indexer-worker as non-root user
by Mike Abbott 22 Feb '13

22 Feb '13

Using dovecot-2.1.15 if I run indexer-worker as a non-root user it fails with an error: Feb 11 13:06:47 indexer-worker: Error: user foobar: Error reading configuration: net_connect_unix(/var/run/dovecot/config) failed: Permission denied This is what I added to 10-master.conf: service indexer-worker { user = _dovecot } The wiki says it should work: <http://wiki2.dovecot.org/Services> indexer-worker [...] • user=root, but the privileges are (temporarily) dropped to the mail user's privileges after userdb lookup. If only a single UID is used, user can be set to the mail UID for higher security, because the process can't gain root privileges anymore. And the code says it should work: <src/indexer/indexer-worker.c> static void drop_privileges(void) { [...] if (set.uid != 0) { /* open config connection before dropping privileges */ Of course the config socket is locked down as it should be: srw------- 1 root daemon 0 Feb 11 13:06 /var/run/dovecot/config Here's where the error comes from: 2 libdovecot.0.dylib 0x00000001019612a0 master_service_settings_read + 2168 3 libdovecot.0.dylib 0x000000010196193e master_service_settings_cache_read + 294 4 libdovecot-storage.0.dylib 0x000000010185d9ad mail_storage_service_read_settings + 510 5 libdovecot-storage.0.dylib 0x000000010185da5d mail_storage_service_lookup + 96 6 libdovecot-storage.0.dylib 0x000000010185f06a mail_storage_service_lookup_next + 42 7 indexer-worker 0x00000001018101a1 master_connection_input + 335 8 libdovecot.0.dylib 0x0000000101972455 io_loop_call_io + 46 9 libdovecot.0.dylib 0x000000010197343e io_loop_handler_run + 214 10 libdovecot.0.dylib 0x0000000101972600 io_loop_run + 77 11 libdovecot.0.dylib 0x00000001019601ef master_service_run + 24 12 indexer-worker 0x000000010180ff17 main + 490 13 libdyld.dylib 0x00007fff89d2f7b5 start + 1 Is this a bug or am I configuring it incorrectly? Thanks.

2 2

[Dovecot] Userdb passwd and 'nologin' users
by Ben Morrow 22 Feb '13

22 Feb '13

I am running Dovecot with system users (userdb passwd), but some of those users don't have shell accounts on the IMAP server so their shell on that machine is set to /usr/sbin/nologin. Currently I am using maildirs and this is not a problem, but I am in the process of switching to dbox which means I will need a cronjob running 'doveadm purge -A'. During testing I found that those users with a 'nologin' shell are not included in the list returned by the userdb iterator, and that the iterator doesn't honour the first/last_valid_uid settings. This inconsistency seems undesirable, so the attached patch - makes lookup perform the same checks as iteration, - makes the 'nologin' check configurable, - adds a new optional check that the user owns their home directory. The last check was the one performed by qmail, and seems to me to be a more reliable 'is this a real user' check than a nologin shell. If this patch is applied, the release notes for the next release should probably mention that system users with a 'nologin' shell will no longer be allowed to log in to IMAP until the 'auth_check_nologin' setting is changed from true to false. Also, there seem to be two first/last_valid_uid settings: first_valid_uid itself, which is honoured by the storage subsystem, and auth_first_valid_uid, which is honoured by the 'passwd' userdb. Is this intentional? Ben

3 5

[Dovecot] "Header is huge" in fts-solr
by Valery V. Sedletski 22 Feb '13

22 Feb '13

Hi, Timo and all! I am trying to index mail in a test mailbox using fts_solr plugin for full-text search. On most mailboxes, it works fine, but on some big messages I get warnings like the following, and then I get an Out of memory error from Solr, then the indexer-worker process (or doveadm) crashes with "assertion failed" error and the backtrace: ========================================================== doveadm(valerius(a)test.afterlogic.com): Warning: fts-solr(valerius(a)test.afterlogic.com): Mailbox gmail.com UID=48 header size is huge doveadm(valerius(a)test.afterlogic.com): Warning: fts-solr(valerius(a)test.afterlogic.com): Mailbox gmail.com UID=49 header size is huge doveadm(valerius(a)test.afterlogic.com): Panic: file ../../../../src/plugins/fts-solr/solr-connection.c: line 548 (solr_connection_post_more): assertion failed: (maxfd >= 0) doveadm(valerius(a)test.afterlogic.com): Error: Raw backtrace: /usr/mailsuite/lib/dovecot/libdovecot.so.0(+0x58f04) [0x7fe8a908af04] -> /usr/mailsuite/lib/dovecot/libdovecot.so.0(default_error_handler+0) [0x7fe8a908af93] -> /usr/mailsuite/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7fe8a908b274] -> /usr/mailsuite/lib/dovecot/lib21_fts_solr_plugin.so(solr_connection_post_more+0x2d2) [0x7fe8a75fe973] -> /usr/mailsuite/lib/dovecot/lib21_fts_solr_plugin.so(+0x4d03) [0x7fe8a75f9d03] -> /usr/mailsuite/lib/dovecot/lib20_fts_plugin.so(fts_backend_update_build_more+0x77) [0x7fe8a7c1d401] -> /usr/mailsuite/lib/dovecot/lib20_fts_plugin.so(+0x7fe2) [0x7fe8a7c1dfe2] -> /usr/mailsuite/lib/dovecot/lib20_fts_plugin.so(+0x80d5) [0x7fe8a7c1e0d5] -> /usr/mailsuite/lib/dovecot/lib20_fts_plugin.so(+0x89e4) [0x7fe8a7c1e9e4] -> /usr/mailsuite/lib/dovecot/lib20_fts_plugin.so(fts_build_mail+0x2b) [0x7fe8a7c1ebf5] -> /usr/mailsuite/lib/dovecot/lib20_fts_plugin.so(+0xe7cf) [0x7fe8a7c247cf] -> /usr/mailsuite/lib/dovecot/lib20_fts_plugin.so(+0xe8ba) [0x7fe8a7c248ba] -> /usr/mailsuite/lib/dovecot/libdovecot-storage.so.0(mail_precache+0x25) [0x7fe8a9379bc9] -> /usr/mailsuite/bin/doveadm() [0x4139de] -> /usr/mailsuite/bin/doveadm() [0x413c17] -> /usr/mailsuite/bin/doveadm() [0x413f18] -> /usr/mailsuite/bin/doveadm() [0x40fea6] -> /usr/mailsuite/bin/doveadm(doveadm_mail_single_user+0x154) [0x410069] -> /usr/mailsuite/bin/doveadm() [0x41090a] -> /usr/mailsuite/bin/doveadm(doveadm_mail_try_run+0xac) [0x410b81] -> /usr/mailsuite/bin/doveadm(main+0x28d) [0x41a92c] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7fe8a8cc9ead] -> /usr/mailsuite/bin/doveadm() [0x40f499] ========================================================== And Solr log, at the same time: ========================================================== 2013-02-01 18:03:53.342:INFO::Logging to STDERR via org.mortbay.log.StdErrLog 2013-02-01 18:03:53.425:INFO::jetty-6.1-SNAPSHOT 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader locateSolrHome INFO: JNDI not configured for solr (NoInitialContextEx) 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader locateSolrHome INFO: solr home defaulted to 'solr/' (could not find system property or JNDI) 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader INFO: new SolrResourceLoader for deduced Solr Home: 'solr/' 01.02.2013 18:03:53 org.apache.solr.servlet.SolrDispatchFilter init INFO: SolrDispatchFilter.init() 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader locateSolrHome INFO: JNDI not configured for solr (NoInitialContextEx) 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader locateSolrHome INFO: solr home defaulted to 'solr/' (could not find system property or JNDI) 01.02.2013 18:03:53 org.apache.solr.core.CoreContainerSInitializer initialize INFO: looking for solr.xml: /home/valerius/apache-solr-3.6.2/example/solr/solr.xml 01.02.2013 18:03:53 org.apache.solr.core.CoreContainer load INFO: Loading CoreContainer using Solr Home: 'solr/' 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader INFO: new SolrResourceLoader for directory: 'solr/' 01.02.2013 18:03:53 org.apache.solr.core.CoreContainer create INFO: Creating SolrCore '' using instanceDir: solr/. 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader INFO: new SolrResourceLoader for directory: 'solr/./' 01.02.2013 18:03:53 org.apache.solr.core.SolrConfig initLibs INFO: Adding specified lib dirs to ClassLoader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/dist/apache-solr-cell-3.6.2.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/poi-ooxml-3.8-beta4.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/jdom-1.0.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/bcprov-jdk15-1.45.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/xmlbeans-2.3.0.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/boilerpipe-1.1.0.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/xercesImpl-2.8.1.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/tika-core-1.0.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/metadata-extractor-2.4.0-beta-1.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/apache-mime4j-core-0.7.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/fontbox-1.6.0.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/pdfbox-1.6.0.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/dom4j-1.6.1.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/asm-3.1.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/jempbox-1.6.0.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/poi-ooxml-schemas-3.8-beta4.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/rome-0.9.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/bcmail-jdk15-1.45.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/tagsoup-1.2.1.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/icu4j-4.8.1.1.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/poi-3.8-beta4.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/tika-parsers-1.0.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/poi-scratchpad-3.8-beta4.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/commons-compress-1.3.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/xml-apis-1.0.b2.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/extraction/lib/apache-mime4j-dom-0.7.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/dist/apache-solr-clustering-3.6.2.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/clustering/lib/jackson-mapper-asl-1.7.4.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/clustering/lib/mahout-collections-0.3.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/clustering/lib/mahout-math-0.3.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/clustering/lib/hppc-0.3.4-jdk15.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/clustering/lib/carrot2-core-3.5.0.1.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/clustering/lib/jackson-core-asl-1.7.4.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/clustering/lib/simple-xml-2.4.1.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/dist/apache-solr-dataimporthandler-3.6.2.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/dataimporthandler/lib/mail-1.4.1.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/dataimporthandler/lib/activation-1.1.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/dist/apache-solr-langid-3.6.2.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/langid/lib/langdetect-1.1-20120112.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/langid/lib/jsonic-1.2.7.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/dist/apache-solr-velocity-3.6.2.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/velocity/lib/velocity-1.6.4.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/velocity/lib/commons-collections-3.2.1.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/velocity/lib/commons-beanutils-1.7.0.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrResourceLoader replaceClassLoader INFO: Adding 'file:/home/valerius/apache-solr-3.6.2/contrib/velocity/lib/velocity-tools-2.0.jar' to classloader 01.02.2013 18:03:53 org.apache.solr.core.SolrConfig INFO: Using Lucene MatchVersion: LUCENE_36 01.02.2013 18:03:54 org.apache.solr.core.SolrConfig INFO: Loaded SolrConfig: solrconfig.xml 01.02.2013 18:03:54 org.apache.solr.schema.IndexSchema readSchema INFO: Reading Solr Schema 01.02.2013 18:03:54 org.apache.solr.schema.IndexSchema readSchema INFO: Schema name=dovecot 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created string: org.apache.solr.schema.StrField 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created long: org.apache.solr.schema.LongField 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created slong: org.apache.solr.schema.SortableLongField 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created float: org.apache.solr.schema.FloatField 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created boolean: org.apache.solr.schema.BoolField 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created : org.apache.solr.analysis.WhitespaceTokenizerFactory 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created : org.apache.solr.analysis.SynonymFilterFactory 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created : org.apache.solr.analysis.StopFilterFactory 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created : org.apache.solr.analysis.WordDelimiterFilterFactory 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created : org.apache.solr.analysis.LowerCaseFilterFactory 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created : org.apache.solr.analysis.SnowballPorterFilterFactory 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created : org.apache.solr.analysis.RemoveDuplicatesTokenFilterFactory 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created : org.apache.solr.analysis.WhitespaceTokenizerFactory 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created : org.apache.solr.analysis.StopFilterFactory 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created : org.apache.solr.analysis.WordDelimiterFilterFactory 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created : org.apache.solr.analysis.LowerCaseFilterFactory 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created : org.apache.solr.analysis.SnowballPorterFilterFactory 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created : org.apache.solr.analysis.NGramFilterFactory 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created : org.apache.solr.analysis.RemoveDuplicatesTokenFilterFactory 01.02.2013 18:03:54 org.apache.solr.util.plugin.AbstractPluginLoader load INFO: created text: org.apache.solr.schema.TextField 01.02.2013 18:03:54 org.apache.solr.schema.IndexSchema readSchema INFO: default search field in schema is body 01.02.2013 18:03:54 org.apache.solr.schema.IndexSchema readSchema INFO: query parser default operator is AND 01.02.2013 18:03:54 org.apache.solr.schema.IndexSchema readSchema INFO: unique key field: id 01.02.2013 18:03:54 org.apache.solr.core.SolrCore INFO: [] Opening new SolrCore at solr/./, dataDir=solr/./data/ 01.02.2013 18:03:54 org.apache.solr.core.JmxMonitoredMap INFO: JMX monitoring is enabled. Adding Solr mbeans to JMX Server: com.sun.jmx.mbeanserver.JmxMBeanServer@27b4c1d7 01.02.2013 18:03:54 org.apache.solr.core.SolrCore initListeners INFO: [] Added SolrEventListener for newSearcher: org.apache.solr.core.QuerySenderListener{queries=[]} 01.02.2013 18:03:54 org.apache.solr.core.SolrCore initListeners INFO: [] Added SolrEventListener for firstSearcher: org.apache.solr.core.QuerySenderListener{queries=[{q=static firstSearcher warming in solrconfig.xml}]} 01.02.2013 18:03:54 org.apache.solr.core.SolrCore initWriters INFO: created json: solr.JSONResponseWriter 01.02.2013 18:03:54 org.apache.solr.core.SolrCore initWriters INFO: adding lazy queryResponseWriter: solr.VelocityResponseWriter 01.02.2013 18:03:54 org.apache.solr.core.SolrCore initWriters INFO: created velocity: solr.VelocityResponseWriter 01.02.2013 18:03:54 org.apache.solr.core.SolrCore initWriters INFO: created xslt: solr.XSLTResponseWriter 01.02.2013 18:03:54 org.apache.solr.response.XSLTResponseWriter init INFO: xsltCacheLifetimeSeconds=5 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: created /select: solr.SearchHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: created /browse: solr.SearchHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: created /update: solr.XmlUpdateRequestHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: created /update/javabin: solr.BinaryUpdateRequestHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: adding lazy requestHandler: solr.CSVRequestHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: created /update/csv: solr.CSVRequestHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: adding lazy requestHandler: solr.JsonUpdateRequestHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: created /update/json: solr.JsonUpdateRequestHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: adding lazy requestHandler: solr.extraction.ExtractingRequestHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: created /update/extract: solr.extraction.ExtractingRequestHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: adding lazy requestHandler: solr.XsltUpdateRequestHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: created /update/xslt: solr.XsltUpdateRequestHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: adding lazy requestHandler: solr.FieldAnalysisRequestHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: created /analysis/field: solr.FieldAnalysisRequestHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: adding lazy requestHandler: solr.DocumentAnalysisRequestHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: created /analysis/document: solr.DocumentAnalysisRequestHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: created /admin/: solr.admin.AdminHandlers 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: created /admin/ping: solr.PingRequestHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: created /debug/dump: solr.DumpRequestHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: adding lazy requestHandler: solr.SearchHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: created /spell: solr.SearchHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: adding lazy requestHandler: solr.SearchHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: created /tvrh: solr.SearchHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: adding lazy requestHandler: solr.SearchHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: created /terms: solr.SearchHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: adding lazy requestHandler: solr.SearchHandler 01.02.2013 18:03:54 org.apache.solr.core.RequestHandlers initHandlersFromConfig INFO: created /elevate: solr.SearchHandler 01.02.2013 18:03:54 org.apache.solr.search.SolrIndexSearcher INFO: Opening Searcher@5c29ea31 main 01.02.2013 18:03:54 org.apache.solr.update.CommitTracker INFO: commitTracker AutoCommit: disabled 01.02.2013 18:03:54 org.apache.solr.handler.component.SpellCheckComponent inform INFO: Initializing spell checkers 01.02.2013 18:03:54 org.apache.solr.handler.component.SpellCheckComponent inform INFO: No queryConverter defined, using default converter 01.02.2013 18:03:54 org.apache.solr.handler.component.QueryElevationComponent inform INFO: Loading QueryElevation from: /home/valerius/apache-solr-3.6.2/example/solr/./conf/elevate.xml 01.02.2013 18:03:54 org.apache.solr.handler.component.SearchHandler inform INFO: Adding component:org.apache.solr.handler.component.QueryComponent@4d16318b 01.02.2013 18:03:54 org.apache.solr.handler.component.SearchHandler inform INFO: Adding component:org.apache.solr.handler.component.FacetComponent@6c0ec436 01.02.2013 18:03:54 org.apache.solr.handler.component.SearchHandler inform INFO: Adding component:org.apache.solr.handler.component.MoreLikeThisComponent@3d73eca6 01.02.2013 18:03:54 org.apache.solr.handler.component.SearchHandler inform INFO: Adding component:org.apache.solr.handler.component.HighlightComponent@5b5a5cf 01.02.2013 18:03:54 org.apache.solr.handler.component.SearchHandler inform INFO: Adding component:org.apache.solr.handler.component.StatsComponent@5898bbf6 01.02.2013 18:03:54 org.apache.solr.handler.component.SearchHandler inform INFO: Adding debug component:org.apache.solr.handler.component.DebugComponent@135c40eb 01.02.2013 18:03:54 org.apache.solr.handler.component.HttpShardHandlerFactory getParameter INFO: Setting socketTimeout to: 0 01.02.2013 18:03:54 org.apache.solr.handler.component.HttpShardHandlerFactory getParameter INFO: Setting urlScheme to: http:// 01.02.2013 18:03:54 org.apache.solr.handler.component.HttpShardHandlerFactory getParameter INFO: Setting connTimeout to: 0 01.02.2013 18:03:54 org.apache.solr.handler.component.HttpShardHandlerFactory getParameter INFO: Setting maxConnectionsPerHost to: 20 01.02.2013 18:03:54 org.apache.solr.handler.component.HttpShardHandlerFactory getParameter INFO: Setting corePoolSize to: 0 01.02.2013 18:03:54 org.apache.solr.handler.component.HttpShardHandlerFactory getParameter INFO: Setting maximumPoolSize to: 2147483647 01.02.2013 18:03:54 org.apache.solr.handler.component.HttpShardHandlerFactory getParameter INFO: Setting maxThreadIdleTime to: 5 01.02.2013 18:03:54 org.apache.solr.handler.component.HttpShardHandlerFactory getParameter INFO: Setting sizeOfQueue to: -1 01.02.2013 18:03:54 org.apache.solr.handler.component.HttpShardHandlerFactory getParameter INFO: Setting fairnessPolicy to: false 01.02.2013 18:03:54 org.apache.solr.handler.component.SearchHandler inform INFO: Adding component:org.apache.solr.handler.component.QueryComponent@4d16318b 01.02.2013 18:03:54 org.apache.solr.handler.component.SearchHandler inform INFO: Adding component:org.apache.solr.handler.component.FacetComponent@6c0ec436 01.02.2013 18:03:54 org.apache.solr.handler.component.SearchHandler inform INFO: Adding component:org.apache.solr.handler.component.MoreLikeThisComponent@3d73eca6 01.02.2013 18:03:54 org.apache.solr.handler.component.SearchHandler inform INFO: Adding component:org.apache.solr.handler.component.HighlightComponent@5b5a5cf 01.02.2013 18:03:54 org.apache.solr.handler.component.SearchHandler inform INFO: Adding component:org.apache.solr.handler.component.StatsComponent@5898bbf6 01.02.2013 18:03:54 org.apache.solr.handler.component.SearchHandler inform INFO: Adding component:org.apache.solr.handler.component.SpellCheckComponent@18f2225f 01.02.2013 18:03:54 org.apache.solr.handler.component.SearchHandler inform INFO: Adding debug component:org.apache.solr.handler.component.DebugComponent@135c40eb 01.02.2013 18:03:54 org.apache.solr.handler.component.HttpShardHandlerFactory getParameter INFO: Setting socketTimeout to: 0 01.02.2013 18:03:54 org.apache.solr.handler.component.HttpShardHandlerFactory getParameter INFO: Setting urlScheme to: http:// 01.02.2013 18:03:54 org.apache.solr.handler.component.HttpShardHandlerFactory getParameter INFO: Setting connTimeout to: 0 01.02.2013 18:03:54 org.apache.solr.handler.component.HttpShardHandlerFactory getParameter INFO: Setting maxConnectionsPerHost to: 20 01.02.2013 18:03:54 org.apache.solr.handler.component.HttpShardHandlerFactory getParameter INFO: Setting corePoolSize to: 0 01.02.2013 18:03:54 org.apache.solr.handler.component.HttpShardHandlerFactory getParameter INFO: Setting maximumPoolSize to: 2147483647 01.02.2013 18:03:54 org.apache.solr.handler.component.HttpShardHandlerFactory getParameter INFO: Setting maxThreadIdleTime to: 5 01.02.2013 18:03:54 org.apache.solr.handler.component.HttpShardHandlerFactory getParameter INFO: Setting sizeOfQueue to: -1 01.02.2013 18:03:54 org.apache.solr.handler.component.HttpShardHandlerFactory getParameter INFO: Setting fairnessPolicy to: false 01.02.2013 18:03:54 org.apache.solr.core.QuerySenderListener newSearcher INFO: QuerySenderListener sending requests to Searcher@5c29ea31 main 01.02.2013 18:03:54 org.apache.solr.core.CoreContainer register INFO: registering core: 01.02.2013 18:03:54 org.apache.solr.servlet.SolrDispatchFilter init INFO: user.dir=/home/valerius/apache-solr-3.6.2/example 01.02.2013 18:03:54 org.apache.solr.servlet.SolrDispatchFilter init INFO: SolrDispatchFilter.init() done 01.02.2013 18:03:54 org.apache.solr.common.SolrException log SEVERE: org.apache.solr.common.SolrException: undefined field text at org.apache.solr.schema.IndexSchema.getDynamicFieldType(IndexSchema.java:1330) at org.apache.solr.schema.IndexSchemaSSolrQueryAnalyzer.getAnalyzer(IndexSchema.java:408) at org.apache.solr.schema.IndexSchemaSSolrIndexAnalyzer.reusableTokenStream(IndexSchema.java:383) at org.apache.lucene.queryParser.QueryParser.getFieldQuery(QueryParser.java:574) at org.apache.solr.search.SolrQueryParser.getFieldQuery(SolrQueryParser.java:206) at org.apache.lucene.queryParser.QueryParser.Term(QueryParser.java:1436) at org.apache.lucene.queryParser.QueryParser.Clause(QueryParser.java:1319) at org.apache.lucene.queryParser.QueryParser.Query(QueryParser.java:1245) at org.apache.lucene.queryParser.QueryParser.TopLevelQuery(QueryParser.java:1234) at org.apache.lucene.queryParser.QueryParser.parse(QueryParser.java:206) at org.apache.solr.search.LuceneQParser.parse(LuceneQParserPlugin.java:79) at org.apache.solr.search.QParser.getQuery(QParser.java:143) at org.apache.solr.handler.component.QueryComponent.prepare(QueryComponent.java:105) at org.apache.solr.handler.component.SearchHandler.handleRequestBody(SearchHandler.java:165) at org.apache.solr.handler.RequestHandlerBase.handleRequest(RequestHandlerBase.java:129) at org.apache.solr.core.SolrCore.execute(SolrCore.java:1376) at org.apache.solr.core.QuerySenderListener.newSearcher(QuerySenderListener.java:59) at org.apache.solr.core.SolrCoreS3.call(SolrCore.java:1182) at java.util.concurrent.FutureTaskSSync.innerRun(FutureTask.java:334) at java.util.concurrent.FutureTask.run(FutureTask.java:166) at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110) at java.util.concurrent.ThreadPoolExecutorSWorker.run(ThreadPoolExecutor.java:603) at java.lang.Thread.run(Thread.java:679) 01.02.2013 18:03:54 org.apache.solr.core.SolrCore execute INFO: [] webapp=null path=null params={event=firstSearcher&q=static+firstSearcher+warming+in+solrconfig.xml} status=400 QTime=22 01.02.2013 18:03:54 org.apache.solr.core.QuerySenderListener newSearcher INFO: QuerySenderListener done. 01.02.2013 18:03:54 org.apache.solr.handler.component.SpellCheckComponentSSpellCheckerListener newSearcher INFO: Loading spell index for spellchecker: default 01.02.2013 18:03:54 org.apache.solr.core.SolrCore registerSearcher INFO: [] Registered new searcher Searcher@5c29ea31 main 01.02.2013 18:03:54 org.apache.solr.servlet.SolrServlet init INFO: SolrServlet.init() 01.02.2013 18:03:54 org.apache.solr.core.SolrResourceLoader locateSolrHome INFO: JNDI not configured for solr (NoInitialContextEx) 01.02.2013 18:03:54 org.apache.solr.core.SolrResourceLoader locateSolrHome INFO: solr home defaulted to 'solr/' (could not find system property or JNDI) 01.02.2013 18:03:54 org.apache.solr.servlet.SolrServlet init INFO: SolrServlet.init() done 01.02.2013 18:03:54 org.apache.solr.core.SolrResourceLoader locateSolrHome INFO: JNDI not configured for solr (NoInitialContextEx) 01.02.2013 18:03:54 org.apache.solr.core.SolrResourceLoader locateSolrHome INFO: solr home defaulted to 'solr/' (could not find system property or JNDI) 01.02.2013 18:03:54 org.apache.solr.servlet.SolrUpdateServlet init INFO: SolrUpdateServlet.init() done 2013-02-01 18:03:54.449:INFO::Started SocketConnector@0.0.0.0:8983 01.02.2013 18:04:40 org.apache.solr.core.SolrDeletionPolicy onInit INFO: SolrDeletionPolicy.onInit: commits:num=1 commit{dir=/home/valerius/apache-solr-3.6.2/example/solr/data/index,segFN=segments_1,version=1359741540635,generation=1,filenames=[segments_1] 01.02.2013 18:04:40 org.apache.solr.core.SolrDeletionPolicy updateCommits INFO: newest commit = 1359741540635 01.02.2013 18:05:05 org.apache.solr.update.processor.LogUpdateProcessor finish INFO: {add=[1/5cc6513b4dc6de5093660000b304ded5/valerius(a)test.afterlogic.com, 48/5cc6513b4dc6de5093660000b304ded5/valerius(a)test.afterlogic.com]} 0 24629 01.02.2013 18:05:05 org.apache.solr.common.SolrException log SEVERE: java.lang.OutOfMemoryError: Java heap space at org.apache.lucene.index.FreqProxTermsWriterPerFieldSFreqProxPostingsArray.(FreqProxTermsWriterPerField.java:193) at org.apache.lucene.index.FreqProxTermsWriterPerFieldSFreqProxPostingsArray.newInstance(FreqProxTermsWriterPerField.java:204) at org.apache.lucene.index.ParallelPostingsArray.grow(ParallelPostingsArray.java:48) at org.apache.lucene.index.TermsHashPerField.growParallelPostingsArray(TermsHashPerField.java:157) at org.apache.lucene.index.TermsHashPerField.add(TermsHashPerField.java:460) at org.apache.lucene.index.DocInverterPerField.processFields(DocInverterPerField.java:189) at org.apache.lucene.index.DocFieldProcessorPerThread.processDocument(DocFieldProcessorPerThread.java:278) at org.apache.lucene.index.DocumentsWriter.updateDocument(DocumentsWriter.java:766) at org.apache.lucene.index.IndexWriter.updateDocument(IndexWriter.java:2328) at org.apache.lucene.index.IndexWriter.updateDocument(IndexWriter.java:2300) at org.apache.solr.update.DirectUpdateHandler2.addDoc(DirectUpdateHandler2.java:240) at org.apache.solr.update.processor.RunUpdateProcessor.processAdd(RunUpdateProcessorFactory.java:61) at org.apache.solr.update.processor.LogUpdateProcessor.processAdd(LogUpdateProcessorFactory.java:115) at org.apache.solr.handler.XMLLoader.processUpdate(XMLLoader.java:157) at org.apache.solr.handler.XMLLoader.load(XMLLoader.java:79) at org.apache.solr.handler.ContentStreamHandlerBase.handleRequestBody(ContentStreamHandlerBase.java:58) at org.apache.solr.handler.RequestHandlerBase.handleRequest(RequestHandlerBase.java:129) at org.apache.solr.core.SolrCore.execute(SolrCore.java:1376) at org.apache.solr.servlet.SolrDispatchFilter.execute(SolrDispatchFilter.java:365) at org.apache.solr.servlet.SolrDispatchFilter.doFilter(SolrDispatchFilter.java:260) at org.mortbay.jetty.servlet.ServletHandlerSCachedChain.doFilter(ServletHandler.java:1212) at org.mortbay.jetty.servlet.ServletHandler.handle(ServletHandler.java:399) at org.mortbay.jetty.security.SecurityHandler.handle(SecurityHandler.java:216) at org.mortbay.jetty.servlet.SessionHandler.handle(SessionHandler.java:182) at org.mortbay.jetty.handler.ContextHandler.handle(ContextHandler.java:766) at org.mortbay.jetty.webapp.WebAppContext.handle(WebAppContext.java:450) at org.mortbay.jetty.handler.ContextHandlerCollection.handle(ContextHandlerCollection.java:230) at org.mortbay.jetty.handler.HandlerCollection.handle(HandlerCollection.java:114) at org.mortbay.jetty.handler.HandlerWrapper.handle(HandlerWrapper.java:152) at org.mortbay.jetty.Server.handle(Server.java:326) at org.mortbay.jetty.HttpConnection.handleRequest(HttpConnection.java:542) at org.mortbay.jetty.HttpConnectionSRequestHandler.content(HttpConnection.java:945) 2013-02-01 18:05:42.595:INFO::Shutdown hook executing 2013-02-01 18:05:42.596:INFO::Graceful shutdown SocketConnector@0.0.0.0:8983 2013-02-01 18:05:42.596:INFO::Graceful shutdown org.mortbay.jetty.webapp.WebAppContext@5484ff20{/solr,file:/home/valerius/apache-solr-3.6.2/example/webapps/solr.war} 2013-02-01 18:05:43.596:INFO::Stopped SocketConnector@0.0.0.0:8983 2013-02-01 18:05:43.784:INFO::Shutdown hook complete ========================================================== So, it seems that Dovecot tries to parse messages in the mailbox, and can't correctly determine where the message header ends. So, it thinks that the message header is big, and passes very big data to Solr. When trying to index it, Solr exhausts the available memory (though, I have 8 Gb of RAM on my machine, and java eats more than 2 Gb when indexing). Then connections to Solr get closed, and maxfd is invalid, hence the assertion is failed. Note also the following error ========================================================== SEVERE: org.apache.solr.common.SolrException: undefined field text ========================================================== before an out of memory error. I also tried to tweak the decode2text.sh script to ignore all attachments bigger than 1 Mb (just test if the file is bigger than 1 Mb, and if so, return "1"). This won't help. As I understood, this is because of big header, so attachments doesn't matter. I separated the set of messages which cause this error (by their UID's). So, I can give them as a testcase, the size of them all in archive is about 40 Mb. The error can be reproduced if put all these messages into an empty mailbox, and do reindexing, via IMAP search, or via "doveadm index -u ". I use Dovecot version 2.1.13. My doveconf -n : ========================================================== # 2.1.13: /usr/mailsuite/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian wheezy/sid ext4 auth_debug = yes auth_debug_passwords = yes auth_default_realm = test.afterlogic.com auth_mechanisms = plain login auth_socket_path = /usr/mailsuite/var/run/dovecot/auth-master base_dir = /usr/mailsuite/var/run/dovecot/ debug_log_path = /usr/mailsuite/var/log/dovecot/debug.log default_internal_user = exim dict { domainquotadict = mysql:/usr/mailsuite/etc/dovecot/dovecot-domain-quota-dict.conf realmquotadict = mysql:/usr/mailsuite/etc/dovecot/dovecot-realm-quota-dict.conf userquotadict = mysql:/usr/mailsuite/etc/dovecot/dovecot-user-quota-dict.conf } disable_plaintext_auth = no info_log_path = /usr/mailsuite/var/log/dovecot/info.log lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes log_path = /usr/mailsuite/var/log/dovecot/dovecot.log log_timestamp = "%Y-%m-%d %H:%M:%S " mail_debug = yes mail_gid = exim mail_home = /usr/mailsuite/data/settings/%d/%n mail_location = maildir:/usr/mailsuite/data/%d/%n mail_plugins = listescape fts fts_solr virtual mail_uid = exim managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave spamtest spamtestplus mbox_write_locks = fcntl namespace { inbox = yes location = maildir:/usr/mailsuite/data/%d/%n prefix = separator = / type = private } namespace { hidden = yes inbox = no list = no location = virtual:/usr/mailsuite/data/virtual/:LAYOUT=maildir++:INDEX=/usr/mailsuite/data/indexes/ prefix = All/ separator = / type = private } passdb { args = /usr/mailsuite/etc/dovecot/dovecot-sql.conf driver = sql } passdb { args = /usr/mailsuite/etc/dovecot/dovecot-sql.conf driver = sql } plugin { antispam_allow_append_to_spam = no antispam_backend = mailtrain antispam_mail_notspam = --ham antispam_mail_sendmail = /usr/mailsuite/scripts/sa-learn-pipe.sh antispam_mail_spam = --spam antispam_mail_tmpdir = /tmp antispam_signature = X-Spam-Flag antispam_signature_missing = error antispam_spam = SPAM antispam_spam_pattern = SPAM antispam_spam_pattern_ignorecase = SPAM antispam_trash = trash;Trash;Deleted Items; Deleted Messages antispam_trash_pattern = trash;Trash;Deleted * antispam_trash_pattern_ignorecase = trash;Deleted * antispam_unsure = antispam_unsure_pattern = antispam_unsure_pattern_ignorecase = fts = solr fts_decoder = decode2text fts_solr = break-imap-search url=http://localhost:8983/solr/ quota = dict:User quota::proxy::userquotadict quota2 = dict::%d:proxy::domainquotadict quota_rule = *:storage=100G quota_rule2 = Trash:storage=+20%% quota_rule3 = Spam:ignore quota_warning = storage=99%% quota-warning user 99 %d %n quota_warning2 = storage=95%% quota-warning user 95 %d %n quota_warning3 = storage=80%% quota-warning user 80 %d %n sieve = /usr/mailsuite/data/%d/%n/sieve.sieve sieve_before = /usr/mailsuite/etc/sieve/system.sieve sieve_dir = /usr/mailsuite/data/%d/%n/filters/ sieve_extensions = +spamtest +spamtestplus +relational +comparator-i;ascii-numeric sieve_global_dir = /usr/mailsuite/etc/sieve/ } protocols = imap pop3 lmtp sieve sendmail_path = /usr/mailsuite/bin/sendmail service auth { unix_listener auth-client { group = exim mode = 0666 user = exim } unix_listener auth-master { group = exim mode = 0666 user = exim } user = Sdefault_internal_user } service decode2text { executable = script /usr/mailsuite/libexec/dovecot/decode2text.sh unix_listener decode2text { mode = 0666 } user = exim } service dict { unix_listener dict { group = exim mode = 0600 user = exim } } service imap-login { inet_listener imap { port = 143 } } service imap-postlogin { executable = script-login /usr/mailsuite/scripts/dovecot-postlogin.sh user = root } service imap { executable = imap imap-postlogin } service indexer-worker { user = root vsz_limit = 768 M } service managesieve-login { inet_listener sieve { port = 4190 } inet_listener sieve_deprecated { port = 2000 } service_count = 1 vsz_limit = 64 M } service quota-warning { executable = script /usr/mailsuite/scripts/send_mail_warnquota.sh unix_listener quota-warning { user = exim } user = exim } ssl_cert =

2 1

[Dovecot] Errors with doveadm when using checkpassword
by Andy Dills 22 Feb '13

22 Feb '13

We have a checkpassword authentication with mysql pre-fetch for the userdb lookups. When trying to do: doveadm search -u andytest(a)xecu.net mailbox Trash DELETED I get: doveadm(andytest(a)xecu.net): Error: user andytest(a)xecu.net: Auth PASS lookup failed doveadm(andytest(a)xecu.net): Fatal: /var/run/dovecot/auth-userdb: passdb lookup failed (to see if user is proxied, because doveadm_proxy_port is set) And I see this in the logs: Feb 4 12:02:04 mail-out01 dovecot: auth: Error: userdb-checkpassword(andytest(a)xecu.net): Child 12591 exited with status 1 I'm not surprised the checkpassword lookup is failing; the password isn't being supplied. Shouldn't it just be doing the prefetch lookup instead, like the lmtp service? Andy --- Andy Dills Xecunet, Inc. www.xecu.net 301-682-9972 ---

2 6

[Dovecot] fts_solr search in subfolders?
by Frederic Biermann 22 Feb '13

22 Feb '13

Hello, i am using dovecot 2.1.x with Solr 4.x and it is all working fine. Search in current selected folder is extremly fast. But i want to ask if it is possible that i have selected inbox, setup a search and get results from subfolders. This is not working for me. I have to select the subfolder and then i get results. Is there any solution to fix this? best regards lexusburn

3 4

[Dovecot] Connection leak in sqlpool for ACL Dict Postgres in v2.1.15 (14907:b96df105ec55) and v2.2.beta1 (15857:07dfd4391d22)
by Steffen Kaiser 22 Feb '13

22 Feb '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I'm using a postgres dict for ACL, when when use deleteacl or setacl I get a "not connected" error and (v2.2) Panic: file driver-pgsql.c: line 84 (driver_pgsql_set_state): assertion failed: (state == SQL_DB_STATE_BUSY || db->cur_result == NULL) and a rawdump eventually. You can trigger the error with the "dict" socket easily: while true; do ( echo -en "H2\t0\t0\t\tacl\nI1\tshared/shared-boxes/\n" sleep 1 ) | socat - unix:/var/run/dovecot2.2/dict done I interprete H2-I1..-bang.log.gz (logged with v2.1) so, that each time the ACL dict is iterated, driver_sqlpool_query_s() is executed two times, once for user_shares and once for anyone_shares. I guess that the user_shares one is never finished, so that the sqlpool keeps that slot in "busy" state until timeout. The information about the slots of the log lines 0x9886d0 1. state=3 to_recon=(nil) ready=0 |driver_sqlpool_query_s end is generated by: conns = array_get(&db->all_connections, &count); for (i = 0; i < count; i++) { struct sql_db *conndb = conns[i].db; i_info("SKA: POOL: [%u] %p %u. state=%u to_recon=%p ready=%u |%s", getpid(), db, i, conndb->state, conndb->to_reconnect, SQL_DB_IS_READY(conndb)? 1: 0, msg); } msg is the function, where that log function is called from, e.g. at the end of driver_sqlpool_query_s() in this case, which is right before the return. When the user_shares query ends in driver_sqlpool_query_s(), one additional slot of the sqlpool is in state 3, at the end of driver_sqlpool_query_s() of the anyone_shares query there are two slots in state 3. When the next I1 command triggers the next iteration, there is one slot still in state 3 at the start of driver_sqlpool_query_s(), which seems to be the slot used for the user_shares query of the previous I1 command. It looks like that the user_shares query has not been "finished" correctly and is left open. The assert() panics, because db->cur_result is != NULL. When all slots in the pool have been used up, the sqlpool enters "not connected" state and all dict connections fail with this error now. Then the assert causes the dict to die eventually, I guess, because of a timeout. The quota dict seems to not trigger that behaviour, because it uses the "L" (lookup) command, but when the sqlpool is in "not connected" state, these commands fail, too. Attached you'll find the config and log file. Kind regards, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEVAwUBUSTYgF3r2wJMiz2NAQLCGggAqcAThH8/phYIGxnkjEt3ECGBabCvDO72 L28rjvaakFffy5jmhrLrcV2b765W9XsZ/bhNOhfkQADAf8oCU9Z5q4h7wG+ZnoMj 4sd1Zax7wU/8idmrF1esSYAfZ1kCVq/ySHY7zs8stoWcpiUk6uQMN4ynYS7c3kxJ yaOWz31s0r4pS8muktq9qCwjlCXDjTigIiPbw9X5qpJ8hnvJq9Xv/BfW5uf1xKKK BXNB+HrQYrOA6VD3KCjteZhaquQFd18B9b35WkBH77thwSbaN1/R4zy8CLLpZOkS 5ss5K/doPitCunGRcNiVD8srgUU6Po7Zv0akBmE1XUfBKkn6JUILDQ== =VpqF -----END PGP SIGNATURE----- = Mailscanner Information [FB02] == Rename Filename At least one attachement has been renamed to overcome a potential filename attack. Right-click on the item and select SaveAs, in order to save the file with its original name. Mindestens ein Anhang wurde umbenannt, um eine potentielle Attacke mit unleserlichen Dateinamen zu verhinden. Um ihn mit seinem orginialen Namen zu speichern, klicken Sie rechts auf den Anhang und wählen SaveAs. See FAQ [http://www5.inf.fh-bonn-rhein-sieg.de/FAQ/mail/scan/] for more information. NewName |OldName ------------------+------------------- H2-I1.-bang.log.gz|H2-I1..-bang.log.gz -- This information was created by the mailscanner automatically. No human interferred with the process.

2 3

[Dovecot] Dovecot 2.2. proxy_maybe and twice SSL connections
by Evgeny Basov 22 Feb '13

22 Feb '13

Hello. 1. I have two identically hosts 2. I have set up replication between two hosts 3. I have 'Y' AS proxy_maybe in password_query. 4. password_query returns one of this one hosts 5. I set this parameters in dovecot config: disable_plaintext_auth = yes ssl = yes auth_mechanisms = plain login for enforce use encrypted connections by client programs. When the client connects to host imap2 directly, connection is encrypted, it is good. | client | ---- (1) ----> |imap2 (proxy_maybe='y', host = imap2)| And when the client connects to another host, I have (1) and (2) connections are encrypted | client | ---- (1) ----> |imap1 (proxy_maybe='y', host = imap2)| ---- (2) ----> |imap2| but need only (1). How do I have desired behavior? Is it possible?

3 5

[Dovecot] Using different auth_default_realm on multiple sockets with postfix. Is it possible?
by Gábor Lénárt 22 Feb '13

22 Feb '13

Hi, I have more postfix smtpd instances (via master.cf) listening on different ports, and the FW passes the inbound mail submit connections to the right port. The problem: it seems postfix is not able to append "default realm" and I need to set different values for the instances. As far as I see, it's not possible as postfix only passes the base64 encoded string from the user to the dovecot auth service (as I'm using dovecot for sasl authentication). We're talking about PLAIN and LOGIN methods. In the other hand, dovecot is happily append "realm" with auth_default_realm. It works (which does not with postfix) but again: I need more defaults. I wouldn't like to run multiple instances of dovecot (just for having a single setting be different), so I've tried similar solutions: service auth { unix_listener /var/spool/postfix/private/auth-dom1 { group = postfix mode = 0660 user = postfix } auth_default_realm = domain1.com } And the same for /var/spool/postfix/private/auth-dom2 with domain2.com. I thought then I could use postfix's master.cf to give different auth socket (like /var/spool/postfix/private/auth-dom1 and auth-dom2) with smtpd_sasl_path postfix parameter. However it seems dovecot finds auth_default_realm invalid unless it's used in the global scope of the configuration. It's dovecot 2.0.19 (in Ubuntu 12.04 LTS). Is it possible at all, what I would like to do? Maybe with newer dovecot, or can you suggest me some other solution? Any feedback is welcomed and thanked. Thanks, - Gábor

2 1

[Dovecot] Errors after enable vnd.dovecot.duplicate
by Alessio Cecchi 22 Feb '13

22 Feb '13

Hi, on dovecot 2.1.14 and pigeonhole-0.3.3 after creating a default.sieve like this: require ["vnd.dovecot.duplicate", "fileinto", "mailbox"]; if duplicate { fileinto "Trash"; } I have two strange errors, one is many of this error in lda.log: Feb 19 14:43:17 lda(info(a)domain.com): Error: file_dotlock_create(/home/vpopmail/domains/domain.com/info/.dovecot.lda-dup… failed: Resource temporarily unavailable Feb 19 14:43:43 lda(info(a)domain.com): Error: file_dotlock_create(/home/vpopmail/domains/domain.com/info/.dovecot.lda-dup… failed: Resource temporarily unavailable Feb 19 14:44:29 lda(info(a)domain.com): Error: rename(/home/vpopmail/domains/domain.com/info/.dovecot.lda-dupes.lock, /home/vpopmail/domains/domain.com/info/.dovecot.lda-dupes) failed: No such file or directory Feb 19 14:44:29 lda(info(a)domain.com): Error: file_dotlock_replace(/home/vpopmail/domains/domain.com/info/.dovecot.lda-du… failed: No such file or directory Note that my mailboxes are store on NFS. This happens for many accounts. Another error is that some messages have not Message-ID in lda.log and when this happens emails are treated as duplicate: # grep "msgid=: stored" /var/log/dovecot/lda.log Feb 18 08:02:13 lda(info(a)domain.com): Info: sieve: msgid=: stored mail into mailbox 'INBOX' Feb 18 09:37:06 lda(info(a)domain.com): Info: sieve: msgid=: stored mail into mailbox 'Trash' Feb 18 10:29:37 lda(cracigna(a)domain.com): Info: sieve: msgid=: stored mail into mailbox 'Trash' Feb 18 11:38:00 lda(info(a)domain.com): Info: sieve: msgid=: stored mail into mailbox 'Trash' Feb 18 12:09:22 lda(info(a)domain.com): Info: sieve: msgid=: stored mail into mailbox 'Trash' Feb 18 16:10:52 lda(info(a)domain.com): Info: sieve: msgid=: stored mail into mailbox 'Trash' Feb 19 14:18:19 lda(cracigna(a)domain.com): Info: sieve: msgid=: stored mail into mailbox 'Trash' Feb 19 14:24:21 lda(panizzon(a)domain.com): Info: sieve: msgid=: stored mail into mailbox 'INBOX' After some investigations this emails are sent all from the same user with a Lotus Domino Server. Can these errors be solved? My dovecot configuration: # 2.1.14: /usr/local/dovecot-2.1/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.6 auth_cache_size = 512 k auth_worker_max_count = 60 default_login_user = nobody dict { acl = mysql:/usr/local/dovecot-2.1/etc/dovecot/dovecot-share-folder.conf expire = mysql:/usr/local/dovecot-2.1/etc/dovecot/dovecot-dict-sql.conf.ext } disable_plaintext_auth = no dotlock_use_excl = no first_valid_gid = 89 first_valid_uid = 89 last_valid_gid = 89 last_valid_uid = 89 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes log_path = /var/log/dovecot/dovecot.log mail_fsync = always mail_location = maildir:~/Maildir mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = quota acl zlib expire maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave vnd.dovecot.duplicate mmap_disable = yes namespace { list = children location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u prefix = shared/%%n/ separator = / subscriptions = no type = shared } namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Spam { auto = subscribe special_use = \Junk } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = / } passdb { args = cache_key=%s%u webmail=192.168.13.215 driver = vpopmail } plugin { acl = vfile:/usr/local/dovecot-2.1/etc/dovecot/global-acls:cache_secs=300 acl_shared_dict = proxy::acl expire = Trash expire2 = Spam expire_dict = proxy::expire quota = maildir:UserQuota quota_rule2 = Trash:storage=+100M quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = ~/.dovecot.sieve sieve_default = /usr/local/dovecot-2.1/etc/dovecot/sieve/default.sieve sieve_dir = ~/sieve sieve_extensions = +vnd.dovecot.duplicate } protocols = imap pop3 sieve service auth { unix_listener auth-userdb { group = vchkpw mode = 0660 user = vpopmail } } service dict { unix_listener dict { group = vchkpw mode = 0660 user = vpopmail } } service imap-login { service_count = 0 } service managesieve-login { inet_listener sieve { port = 4190 } } service pop3-login { service_count = 0 } service quota-warning { executable = script /usr/local/dovecot-2.1/etc/dovecot/scripts/quota-warning.sh unix_listener quota-warning { user = vpopmail } user = vpopmail } ssl_cert = </usr/local/dovecot-2.1/etc/ssl/wildcard.pem ssl_key = </usr/local/dovecot-2.1/etc/ssl/wildcard.key submission_host = localhost userdb { args = quota_template=quota_rule=*:backend=%q driver = vpopmail } protocol lda { log_path = /var/log/dovecot/lda.log mail_plugins = quota acl zlib expire sieve } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep tb-lsub-flags imap_idle_notify_interval = 29 mins mail_max_userip_connections = 18 mail_plugins = quota acl zlib expire imap_quota imap_acl } protocol sieve { mail_max_userip_connections = 10 } protocol pop3 { mail_max_userip_connections = 5 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } Thanks -- Alessio Cecchi is: @ ILS -> http://www.linux.it/~alessice/ on LinkedIn -> http://www.linkedin.com/in/alessice Assistenza Sistemi GNU/Linux -> http://www.cecchi.biz/ @ PLUG -> ex-Presidente, adesso senatore a vita, http://www.prato.linux.it

3 4

[Dovecot] Full-text search
by Valery V. Sedletski 22 Feb '13

22 Feb '13

Hi all I discovered that the full-text search (fts) plugin can work without SQUAT/LUCENE/SOLR backend. I.e., Dovecot creates separate indexes for header search in files dovecot.index and dovecot.index.cache. Even, the search by headers is fast enough, and can search for phrases. Also, it seems that this buillt-in search is faster than Solr-based search. But if I enable the Solr backend (fts_solr), then the FTS generic plugin built-in search becomes disabled. But, Solr-based Full-text search is faster if search inside message bodies. Also, it appears that the built-in search inside message bodies works too, but very slow (it seems that is because it is dumb file-based search and does not use indexes at all) So, my question is: is it possible to combine the built-in search with Solr or Lucene plugin-based search so that the first one searches by headers, and the second one works by bodies? This could make the advantages of both search methods combined. WBR, valery

2 1

[Dovecot] LDA misbehavior?
by Eugene Paskevich 22 Feb '13

22 Feb '13

Hello, Could somebody please give me a hint on what might be going wrong? Feb 21 16:33:07 hopper dovecot: lda(eugene): Panic: file mail-storage.c: line 1757 (mailbox_transaction_commit_get_changes): assertion failed: (ret < 0 || seq_range_count(&changes_r->saved_uids) == save_count) Feb 21 16:33:07 hopper dovecot: lda(eugene): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x6019a) [0x7f38e5ef619a] -> /usr/lib/dovecot/ibdovecot.s o.0(i_syslog_fatal_handler+0x2b) [0x7f38e5ef621b] -> /usr/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f38e5eb81f4] -> /usr/lib/dovecot/libdovecot-storage.so.0(+0x7c0de) [0x7f38e61cd0de] -> /usr/lib/dovecot/libdovecot-lda.so.0(mail_deliver_save+0x1b2) [0x7f38e6469d62] -> /usr/lib/dovecot/libdovecot-lda.so.0(mail_deliver+0xe3) [0x7f38e646a113] -> /usr/lib/dovecot/dovecot-lda(main+0x38a) [0x40295a] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7f38e5b2aead] -> /usr/lib/dovecot/dovecot-lda() [0x4031e1] Feb 21 16:33:07 hopper exim[10094]: 1U8XCf-0002Za-4s ** eugene(a)hopper.volia.net <root(a)hopper.volia.net> R=local_user T=dovecot_delivery: Child process of dovecot_delivery transport (running command "/usr/lib/dovecot/dovecot-lda -f $sender_address -a $original_local_part@$original_domain") was terminated by signal 6 (Aborted) Feb 21 16:33:07 hopper exim[10094]: 1U8XCf-0002Za-4s Frozen (delivery error message) It started a couple of days ago. Triggered by the mass delivery. E.g. by for i in {1..50}; do { mail -s "test $i" eugene(a)hopper.volia.net <<< "Try $i" & }; done I suspected that sieve might cause that, but disabling it gave nothing. Current root@hopper[pts/0]:/etc/dovecot> doveconf -n # 2.2.beta1 (808a64899e8a): /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.0 mail_location = maildir:~/Maildir namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } postmaster_address = hopper(a)volia.net protocols = imap service imap-login { inet_listener imap { port = 143 } inet_listener imap2 { port = 1357 } } ssl_cert = </etc/dovecot/dovecot.pem ssl_key = </etc/dovecot/private/dovecot.pem userdb { driver = passwd } Is there any other info I could provide? -- Eugene Paskevich | *==)----------- | Plug me into eugene(a)raptor.kiev.ua | -----------(==* | The Matrix

2 1

[Dovecot] Bug: empty m-files
by Peer Heinlein 22 Feb '13

22 Feb '13

Having an empty m-File, doveadm force-resync isn't able to detect and repair this: -rw------- 1 vmail vmail 4948043 8. Jan 20:32 m.634 -rw------- 1 vmail vmail 5237411 8. Jan 20:32 m.635 -rw------- 1 vmail vmail 0 9. Jan 16:23 m.636 mail1:~ # doveadm force-resync -u user mailbox INBOX doveadm(user): Warning: fscking index file /vmail/example.com/user//mdbox/storage/dovecot.map.index doveadm(user): Warning: mdbox /vmail/example.com/user//mdbox/storage: rebuilding indexes doveadm(user): Error: Corrupted dbox file /vmail/example.com/user//mdbox/storage/m.636 (around offset=0): EOF while reading file header doveadm(user): Error: mdbox rebuild: Failed to fix file /vmail/example.com/user//mdbox/storage/m.636 doveadm(user): Error: mdbox /vmail/example.com/user//mdbox/storage: Duplicate GUID 2cafdd2f0224ec50773c0000085c1439 in m.627:16 and m.638:16 Peer -- Heinlein Support GmbH Schwedter Str. 8/9b, 10119 Berlin http://www.heinlein-support.de Tel: 030 / 405051-42 Fax: 030 / 405051-19 Zwangsangaben lt. §35a GmbHG: HRB 93818 B / Amtsgericht Berlin-Charlottenburg, Geschäftsführer: Peer Heinlein -- Sitz: Berlin

2 1

[Dovecot] Crash in dsync [dovecot 2.1.7]
by Joe Beaubien 22 Feb '13

22 Feb '13

Just taught i'd report this crash while running the ofllowing command: 19748 Aborted (core dumped) $DSYNC_BINARY -f -u document backup mdbox:$LOCAL_BACKUP_PATH/emails/document >> $LOG_FILE 2>&1 Here is the traceback I got: dsync(document): Error: Mailbox INBOX/Julie: Corrupted index, uidvalidity=0 dsync(document): Warning: mdbox /backup_hdd/current/emails/document/storage: rebuilding indexes dsync(document): Panic: file mdbox-storage-rebuild.c: line 66 (mdbox_storage_rebuild_init): assertion failed: (!storage->rebuilding_storage) dsync(document): Error: Raw backtrace: /opt/dovecot-2.1.7/lib/dovecot/libdovecot.so.0(+0x4203a) [0x7faa3bbde03a] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot.so.0(default_fatal_handler+0x2a) [0x7faa3bbde0fa] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7faa3bbb53f0] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(mdbox_storage_rebuild_in_context+0x117e) [0x7faa3be656de] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(mdbox_sync_begin+0x23a) [0x7faa3be62b1a] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(mdbox_sync+0x33) [0x7faa3be630f3] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(mdbox_storage_sync_init+0x7e) [0x7faa3be631be] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(mailbox_sync_init+0x31) [0x7faa3bea2871] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(mailbox_sync+0x27) [0x7faa3bea2997] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(mailbox_mark_index_deleted+0x9b) [0x7faa3bea3aeb] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(mailbox_open+0x85) [0x7faa3bea3a25] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(mdbox_storage_rebuild_in_context+0xb7b) [0x7faa3be650db] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(mdbox_sync_begin+0x23a) [0x7faa3be62b1a] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(mdbox_sync+0x33) [0x7faa3be630f3] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(mdbox_storage_sync_init+0x7e) [0x7faa3be631be] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(mailbox_sync_init+0x31) [0x7faa3bea2871] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(mailbox_sync+0x27) [0x7faa3bea2997] -> /opt/dovecot-2.1.7/lib/dovecot/libdovecot-storage.so.0(index_storage_get_status+0x8a) [0x7faa3bec47da] -> /opt/dovecot/lib/dovecot/lib20_fts_plugin.so(+0xc002) [0x7faa3a775002] -> /opt/dovecot/bin/dsync() [0x42bf9a] -> /opt/dovecot/bin/dsync(dsync_worker_mailbox_iter_next+0x29) [0x428eb9] -> /opt/dovecot/bin/dsync() [0x423bfe] -> /opt/dovecot/bin/dsync(dsync_brain_sync+0x832) [0x4233a2] -> /opt/dovecot/bin/dsync(dsync_brain_sync_all+0x18) [0x423ee8] -> /opt/dovecot/bin/dsync() [0x420f36] -> /opt/dovecot/bin/dsync() [0x4215b2] -> /opt/dovecot/bin/dsync() [0x40e798] -> /opt/dovecot/bin/dsync() [0x40f1ea]

2 1

[Dovecot] Problem with managesieve proxy
by Lance A. Brown 22 Feb '13

22 Feb '13

Hi folks, I'm setting up a new dovecot email service and have a proxy server running in front of it to facilitate migrating users from my very old UW-IMAP-based mail server to the new one. I have a mysql proxy table that directs inbound IMAP and LMTP connections to the correct server, works great. Managesieve connections are not working through the proxy using either with the sieverules plugin for RoundCube or the Sieve plugin for Thunderbird. If I point them directly at the actual dovecot server everything works fine, so I must have something wrong in my proxy setup. This is what I get in the maillogs when I try to connect to the managesieve proxy: PROXY machine: Feb 21 16:16:38 sortie dovecot: managesieve-login: Error: proxy: Remote x.y.z.110:4190 disconnected: Connection closed (state=0, duration=0s): user=<brown>, method=PLAIN, rip=x.y.z.83, lip=x.y.z.109, TLS, session=<0jUal0LWswCYAxZT> Feb 21 16:16:38 sortie dovecot: managesieve-login: Disconnected (internal failure, 1 succesful auths): user=<brown>, method=PLAIN, rip=x.y.z.83, lip=x.y.z.109, TLS, session=<0jUal0LWswCYAxZT> SERVER machine: Feb 21 16:16:38 postie dovecot: managesieve-login: Disconnected: Too many invalid commands. (no auth attempts in 0 secs): user=<>, rip=x.y.z.109, lip=x.y.z.110, session=<REgal0LWnQCYAxZt> Output of a 'tcpdump -A' is attached as well if needed. x.y.z.83 - Roundcube webmail server x.y.z.109 - PROXY x.y.z.110 - SERVER If I turn off TLS all-around I get an error in the roundcube log that says: [20-Feb-2013 23:02:27] No supported authentication method found. The server supports these methods: , but we want to use: PLAIN (): [20-Feb-2013 23:02:27] Not currently in AUTHORISATION state (1): I am using Pigeonhole 0.3.3 on both proxy and server. Dovecot configurations for the proxy and server are attached below. Here are the SQL files referenced in the proxy configs. Long lines broke for readability. /etc/dovecot/dovecot-sql.conf.ext driver = mysql connect = host=localhost dbname=dovecot user=dovecot password=XXX password_query = SELECT NULL AS password, 'any-cert' as 'ssl', \ 'Y' as nopassword, host, user as destuser, \ 'Y' AS proxy \ FROM proxy WHERE user = '%u' /etc/dovecot/dovecot-sql-lmtp.conf.ext driver = mysql connect = host=localhost dbname=dovecot user=dovecot password=XXX password_query = SELECT NULL AS password, 'any-cert' as 'ssl', \ 'Y' as nopassword, host, user as destuser, 'Y' AS proxy \ FROM proxy WHERE user = '%n' The proxy DB table looks like this: - -- Table structure for table `proxy` -- CREATE TABLE IF NOT EXISTS `proxy` ( `id` int(11) NOT NULL AUTO_INCREMENT, `user` varchar(255) NOT NULL, `email` varchar(64) NOT NULL, `host` varchar(16) DEFAULT NULL, PRIMARY KEY (`id`), UNIQUE KEY `user_index` (`user`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 AUTO_INCREMENT=379 ; -- -- Dumping data for table `proxy` -- INSERT INTO `proxy` (`id`, `user`, `email`, `host`) VALUES (1, 'brown', '', 'x.y.z.110'), (2, 'fizgig', '', 'x.r.z.15'), 110 is the new dovecot IMAP server, 15 is the old UW-IMAP server. Any advice on getting managesieve proxy running would be greatly appreciated. Thanks, --[Lance] -- GPG Fingerprint: 409B A409 A38D 92BF 15D9 6EEE 9A82 F2AC 69AC 07B9 CACert.org Assurer

1 1

[Dovecot] Dovecot list archives not updating
by Mark Sapiro 22 Feb '13

22 Feb '13

The February archive indexes of this list haven't been updating since Feb 8. The text file at <http://dovecot.org/pipermail/dovecot/2013-February.txt> appears to be up to date with all posts, but the index pages at <http://dovecot.org/pipermail/dovecot/2013-February/thread.html>, <http://dovecot.org/pipermail/dovecot/2013-February/subject.html>, <http://dovecot.org/pipermail/dovecot/2013-February/author.html> and <http://dovecot.org/pipermail/dovecot/2013-February/date.html> have no posts after the one at <http://dovecot.org/pipermail/dovecot/2013-February/071213.html> from Fri Feb 8 16:31:49 EET 2013. Subsequent posts appear to not have individual HTML pages either as URLs <http://dovecot.org/pipermail/dovecot/2013-February/071214.html> and <http://dovecot.org/pipermail/dovecot/2013-February/071215.html> return 404 errors. I suspect there is a permissions issue starting soon after Fri Feb 8 16:31:49 EET 2013 and that Mailman's error log has lots of tracebacks from this. If that is the case, the messages were probably all shunted and running Mailman's bin/unshunt after fixing the underlying issue and also making sure that any messages older than Fri Feb 8 16:31:49 EET 2013 in Mailman's 'shunt' queue that should not also be reprocessed are removed. -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

1 0

[Dovecot] Public folders and dsync replication Dovecot v2.1.7
by Steve Brown 21 Feb '13

21 Feb '13

Dear all I have a few public folders setup and working fine, and one such public folder is 'Public/General'. I'm trying to sort dsync replication out to another server and notice that the system log is full of error messages similar to: dovecot: doveadm: Error: dsync-remote(username: Error: Can't update subscription Pu blic/General: Invalid mailbox name The replication setup is basically as per the v2 wiki. It seems that when a mail client subscribes to a public folder, the folder name is put into '~/Maildir/subscriptions' and this seems to be the cause of the error during replication. The mails are not synchronised to the other server. Public namespace is: namespace { type = public separator = / prefix = Public/ location = maildir:/home/shared/public subscriptions = no list = yes } Hopefully somebody can send the clue bus over? Steve -- Steve Brown Operations Manager Connection Services Ltd +44 (0)1189 711 765 Direct +44 (0)870 751 7571 Fax www.connectionservices.com www.hotspot-directory.com

3 2

Re: [Dovecot] Dovecot LDA LDAP lookups on samba4 server ends very often in timeouts (Christian Wiese)
by Marco Carcano 21 Feb '13

21 Feb '13

Dear Christian thank you very much - you got it at the very first shot: modified /etc/ openldap/ldap.conf adding REFERRALS off en everything works without issues now many thanks Marco Carcano

1 0

[Dovecot] Dovecot LDA LDAP lookups on samba4 server ends very often in timeouts
by marco＠carcano.ch 20 Feb '13

20 Feb '13

I hope that someone will be so kind to help me into solving this really strange thing (don't know if it is a bug or not) I have a samba4 server and want to use postfix+dovecot - dovecot version is 2.0.11 as for the postfix side everything is OK (all the LDAP lookups works without any error, tested also manually with postmap -q) the real pain is with dovecot deliver: it seems that sometimes lda tries to lookup to the LDPA (samba 4) server, got a reply, an then report(after 2 minutes) a lookup timeout error the really strange thing is that (very seldom) lda works, but most of the times I got the timeout error. The strange thing is that if I use ldapsearch I never got timeout neither late replies, and even postfix performs its lookups without any issue it seems something related to lda itself (I do not know if I have a wrong configuration, but I think this is not a configuration issue, otherwise it should not work at all) here are the information logged when it does not work - after this log you will find the one when I got the failure (if needed I can provide a .pcap file too) (trailing and leading spaces of AT charcater has been added by me) ############################## FAULTY DELIVER LOG ############################################# Feb 20 12:20:50 sng02 postfix/smtpd[8928]: connect from localhost[127.0.0.1] Feb 20 12:21:14 sng02 postfix/smtpd[8928]: A38D4407F5: client=localhost[127.0.0.1] Feb 20 12:21:20 sng02 postfix/cleanup[8891]: A38D4407F5: warning: header Subject: prova from localhost[127.0.0.1]; from=<marco @ senderdomain.tld> to=<mac @ mydomain.com> proto=SMTP helo=<senderdomain.tld> Feb 20 12:21:20 sng02 postfix/cleanup[8891]: A38D4407F5: message-id=<20130220112114.A38D4407F5 @ srv01.mydomain.local> Feb 20 12:21:20 sng02 postfix/qmgr[8889]: A38D4407F5: from=<marco @ senderdomain.tld>, size=371, nrcpt=1 (queue active) Feb 20 12:21:20 sng02 dovecot: lda: Debug: Loading modules from directory: /usr/lib64/dovecot Feb 20 12:21:20 sng02 dovecot: lda: Debug: Module loaded: /usr/lib64/dovecot/lib10_quota_plugin.so Feb 20 12:21:20 sng02 dovecot: lda: Debug: Module loaded: /usr/lib64/dovecot/lib20_expire_plugin.so Feb 20 12:21:20 sng02 dovecot: lda: Debug: Module loaded: /usr/lib64/dovecot/lib90_sieve_plugin.so Feb 20 12:21:20 sng02 dovecot: auth: Debug: Loading modules from directory: /usr/lib64/dovecot/auth Feb 20 12:21:20 sng02 dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libauthdb_ldap.so Feb 20 12:21:20 sng02 dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_mysql.so Feb 20 12:21:20 sng02 dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_pgsql.so Feb 20 12:21:20 sng02 dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_sqlite.so Feb 20 12:21:20 sng02 dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libmech_gssapi.so Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_bind Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_simple_bind Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_sasl_bind Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_send_initial_request Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_new_connection 1 1 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_int_open_connection Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_connect_to_host: TCP localhost:389 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_new_socket: 16 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_prepare_socket: 16 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_connect_to_host: Trying ::1 389 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_pvt_connect: fd: 16 tm: -1 async: 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_open_defconn: successful Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_send_server_request Feb 20 12:21:20 sng02 dovecot: auth: Debug: master in: USER#0111#011marco.carcano#011service=lda Feb 20 12:21:20 sng02 dovecot: auth: Debug: password(marco.carcano): passdb doesn't support credential lookups Feb 20 12:21:20 sng02 dovecot: auth: Error: static(marco.carcano): passdb doesn't support lookups, can't verify user's existence Feb 20 12:21:20 sng02 dovecot: auth: Debug: ldap(marco.carcano): user search: base=DC=mydomain,DC=local scope=subtree filter=(sAMAccountname=marco.carcano) fields=Mailbox,dovecotMailQuota Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_result ld 0x6cba60 msgid -1 Feb 20 12:21:20 sng02 dovecot: auth: Error: wait4msg ld 0x6cba60 msgid -1 (timeout 0 usec) Feb 20 12:21:20 sng02 dovecot: auth: Error: wait4msg continue ld 0x6cba60 msgid -1 all 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ** ld 0x6cba60 Connections: Feb 20 12:21:20 sng02 dovecot: auth: Error: * host: localhost port: 389 (default) Feb 20 12:21:20 sng02 dovecot: auth: Error: refcnt: 2 status: Connected Feb 20 12:21:20 sng02 dovecot: auth: Error: last used: Wed Feb 20 12:21:20 2013 Feb 20 12:21:20 sng02 dovecot: auth: Error: Feb 20 12:21:20 sng02 dovecot: auth: Error: Feb 20 12:21:20 sng02 dovecot: auth: Error: ** ld 0x6cba60 Outstanding Requests: Feb 20 12:21:20 sng02 dovecot: auth: Error: * msgid 1, origid 1, status InProgress Feb 20 12:21:20 sng02 dovecot: auth: Error: outstanding referrals 0, parent count 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ld 0x6cba60 request count 1 (abandoned 0) Feb 20 12:21:20 sng02 dovecot: auth: Error: ** ld 0x6cba60 Response Queue: Feb 20 12:21:20 sng02 dovecot: auth: Error: Empty Feb 20 12:21:20 sng02 dovecot: auth: Error: ld 0x6cba60 response count 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_chkResponseList ld 0x6cba60 msgid -1 all 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_chkResponseList returns ld 0x6cba60 NULL Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_int_select Feb 20 12:21:20 sng02 dovecot: auth: Error: read1msg: ld 0x6cba60 msgid -1 all 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: read1msg: ld 0x6cba60 msgid 1 message type bind Feb 20 12:21:20 sng02 dovecot: auth: Error: read1msg: ld 0x6cba60 0 new referrals Feb 20 12:21:20 sng02 dovecot: auth: Error: read1msg: mark request completed, ld 0x6cba60 msgid 1 Feb 20 12:21:20 sng02 dovecot: auth: Error: request done: ld 0x6cba60 msgid 1 Feb 20 12:21:20 sng02 dovecot: auth: Error: res_errno: 0, res_error: <>, res_matched: <> Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_free_request (origid 1, msgid 1) Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_parse_result Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_search Feb 20 12:21:20 sng02 dovecot: auth: Error: put_filter: "(sAMAccountname=marco.carcano)" Feb 20 12:21:20 sng02 dovecot: auth: Error: put_filter: simple Feb 20 12:21:20 sng02 dovecot: auth: Error: put_simple_filter: "sAMAccountname=marco.carcano" Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_send_initial_request Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_send_server_request Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_msgfree Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_result ld 0x6cba60 msgid -1 Feb 20 12:21:20 sng02 dovecot: auth: Error: wait4msg ld 0x6cba60 msgid -1 (timeout 0 usec) Feb 20 12:21:20 sng02 dovecot: auth: Error: wait4msg continue ld 0x6cba60 msgid -1 all 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ** ld 0x6cba60 Connections: Feb 20 12:21:20 sng02 dovecot: auth: Error: * host: localhost port: 389 (default) Feb 20 12:21:20 sng02 dovecot: auth: Error: refcnt: 2 status: Connected Feb 20 12:21:20 sng02 dovecot: auth: Error: last used: Wed Feb 20 12:21:20 2013 Feb 20 12:21:20 sng02 dovecot: auth: Error: Feb 20 12:21:20 sng02 dovecot: auth: Error: Feb 20 12:21:20 sng02 dovecot: auth: Error: ** ld 0x6cba60 Outstanding Requests: Feb 20 12:21:20 sng02 dovecot: auth: Error: * msgid 2, origid 2, status InProgress Feb 20 12:21:20 sng02 dovecot: auth: Error: outstanding referrals 0, parent count 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ld 0x6cba60 request count 1 (abandoned 0) Feb 20 12:21:20 sng02 dovecot: auth: Error: ** ld 0x6cba60 Response Queue: Feb 20 12:21:20 sng02 dovecot: auth: Error: Empty Feb 20 12:21:20 sng02 dovecot: auth: Error: ld 0x6cba60 response count 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_chkResponseList ld 0x6cba60 msgid -1 all 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_chkResponseList returns ld 0x6cba60 NULL Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_int_select Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_result ld 0x6cba60 msgid -1 Feb 20 12:21:20 sng02 dovecot: auth: Error: wait4msg ld 0x6cba60 msgid -1 (timeout 0 usec) Feb 20 12:21:20 sng02 dovecot: auth: Error: wait4msg continue ld 0x6cba60 msgid -1 all 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ** ld 0x6cba60 Connections: Feb 20 12:21:20 sng02 dovecot: auth: Error: * host: localhost port: 389 (default) Feb 20 12:21:20 sng02 dovecot: auth: Error: refcnt: 2 status: Connected Feb 20 12:21:20 sng02 dovecot: auth: Error: last used: Wed Feb 20 12:21:20 2013 Feb 20 12:21:20 sng02 dovecot: auth: Error: Feb 20 12:21:20 sng02 dovecot: auth: Error: Feb 20 12:21:20 sng02 dovecot: auth: Error: ** ld 0x6cba60 Outstanding Requests: Feb 20 12:21:20 sng02 dovecot: auth: Error: * msgid 2, origid 2, status InProgress Feb 20 12:21:20 sng02 dovecot: auth: Error: outstanding referrals 0, parent count 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ld 0x6cba60 request count 1 (abandoned 0) Feb 20 12:21:20 sng02 dovecot: auth: Error: ** ld 0x6cba60 Response Queue: Feb 20 12:21:20 sng02 dovecot: auth: Error: Empty Feb 20 12:21:20 sng02 dovecot: auth: Error: ld 0x6cba60 response count 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_chkResponseList ld 0x6cba60 msgid -1 all 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_chkResponseList returns ld 0x6cba60 NULL Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_int_select Feb 20 12:21:20 sng02 dovecot: auth: Error: read1msg: ld 0x6cba60 msgid -1 all 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: read1msg: ld 0x6cba60 msgid 2 message type search-entry Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_first_attribute Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_get_values Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_next_attribute Feb 20 12:21:20 sng02 dovecot: auth: Debug: ldap(marco.carcano): result: dovecotMailQuota(quota_rule=%$)=*:storage=8192M Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_msgfree Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_result ld 0x6cba60 msgid -1 Feb 20 12:21:20 sng02 dovecot: auth: Error: wait4msg ld 0x6cba60 msgid -1 (timeout 0 usec) Feb 20 12:21:20 sng02 dovecot: auth: Error: wait4msg continue ld 0x6cba60 msgid -1 all 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ** ld 0x6cba60 Connections: Feb 20 12:21:20 sng02 dovecot: auth: Error: * host: localhost port: 389 (default) Feb 20 12:21:20 sng02 dovecot: auth: Error: refcnt: 2 status: Connected Feb 20 12:21:20 sng02 dovecot: auth: Error: last used: Wed Feb 20 12:21:20 2013 Feb 20 12:21:20 sng02 dovecot: auth: Error: Feb 20 12:21:20 sng02 dovecot: auth: Error: Feb 20 12:21:20 sng02 dovecot: auth: Error: ** ld 0x6cba60 Outstanding Requests: Feb 20 12:21:20 sng02 dovecot: auth: Error: * msgid 2, origid 2, status InProgress Feb 20 12:21:20 sng02 dovecot: auth: Error: outstanding referrals 0, parent count 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ld 0x6cba60 request count 1 (abandoned 0) Feb 20 12:21:20 sng02 dovecot: auth: Error: ** ld 0x6cba60 Response Queue: Feb 20 12:21:20 sng02 dovecot: auth: Error: Empty Feb 20 12:21:20 sng02 dovecot: auth: Error: ld 0x6cba60 response count 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_chkResponseList ld 0x6cba60 msgid -1 all 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_chkResponseList returns ld 0x6cba60 NULL Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_int_select Feb 20 12:21:20 sng02 dovecot: auth: Error: read1msg: ld 0x6cba60 msgid -1 all 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: read1msg: ld 0x6cba60 msgid 2 message type search-reference Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_chase_v3referrals Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_url_parse_ext(ldap://mydomain.local/CN=Configuration,DC=mydomain,DC=local) Feb 20 12:21:20 sng02 dovecot: auth: Error: re_encode_request: new msgid 3, new dn <CN=Configuration,DC=mydomain,DC=local> Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_chase_v3referral: msgid 2, url "ldap://mydomain.local/CN=Configuration,DC=mydomain,DC=local" Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_send_server_request Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_new_connection 0 1 1 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_int_open_connection Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_connect_to_host: TCP mydomain.local:389 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_new_socket: 18 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_prepare_socket: 18 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_connect_to_host: Trying 192.168.32.2:389 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_pvt_connect: fd: 18 tm: -1 async: 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: anonymous rebind via ldap_sasl_bind("") Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_sasl_bind Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_send_initial_request Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_send_server_request Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_result ld 0x6cba60 msgid 4 Feb 20 12:21:20 sng02 dovecot: auth: Error: wait4msg ld 0x6cba60 msgid 4 (timeout 100000 usec) Feb 20 12:21:20 sng02 dovecot: auth: Error: wait4msg continue ld 0x6cba60 msgid 4 all 1 Feb 20 12:21:20 sng02 dovecot: auth: Error: ** ld 0x6cba60 Connections: Feb 20 12:21:20 sng02 dovecot: auth: Error: * host: mydomain.local port: 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: refcnt: 2 status: Connected Feb 20 12:21:20 sng02 dovecot: auth: Error: last used: Wed Feb 20 12:21:20 2013 Feb 20 12:21:20 sng02 dovecot: auth: Error: rebind in progress Feb 20 12:21:20 sng02 dovecot: auth: Error: queue is empty Feb 20 12:21:20 sng02 dovecot: auth: Error: Feb 20 12:21:20 sng02 dovecot: auth: Error: * host: localhost port: 389 (default) Feb 20 12:21:20 sng02 dovecot: auth: Error: refcnt: 3 status: Connected Feb 20 12:21:20 sng02 dovecot: auth: Error: last used: Wed Feb 20 12:21:20 2013 Feb 20 12:21:20 sng02 dovecot: auth: Error: Feb 20 12:21:20 sng02 dovecot: auth: Error: Feb 20 12:21:20 sng02 dovecot: auth: Error: ** ld 0x6cba60 Outstanding Requests: Feb 20 12:21:20 sng02 dovecot: auth: Error: * msgid 4, origid 4, status InProgress Feb 20 12:21:20 sng02 dovecot: auth: Error: outstanding referrals 0, parent count 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: * msgid 2, origid 2, status InProgress Feb 20 12:21:20 sng02 dovecot: auth: Error: outstanding referrals 1, parent count 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ld 0x6cba60 request count 2 (abandoned 0) Feb 20 12:21:20 sng02 dovecot: auth: Error: ** ld 0x6cba60 Response Queue: Feb 20 12:21:20 sng02 dovecot: auth: Error: Empty Feb 20 12:21:20 sng02 dovecot: auth: Error: ld 0x6cba60 response count 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_chkResponseList ld 0x6cba60 msgid 4 all 1 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_chkResponseList returns ld 0x6cba60 NULL Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_int_select Feb 20 12:21:20 sng02 dovecot: auth: Error: read1msg: ld 0x6cba60 msgid 4 all 1 Feb 20 12:21:20 sng02 dovecot: auth: Error: read1msg: ld 0x6cba60 msgid 2 message type search-result Feb 20 12:21:20 sng02 dovecot: auth: Error: read1msg: ld 0x6cba60 0 new referrals Feb 20 12:21:20 sng02 dovecot: auth: Error: read1msg: mark request completed, ld 0x6cba60 msgid 2 Feb 20 12:21:20 sng02 dovecot: auth: Error: wait4msg ld 0x6cba60 0 s 99952 us to go Feb 20 12:21:20 sng02 dovecot: auth: Error: wait4msg continue ld 0x6cba60 msgid 4 all 1 Feb 20 12:21:20 sng02 dovecot: auth: Error: ** ld 0x6cba60 Connections: Feb 20 12:21:20 sng02 dovecot: auth: Error: * host: mydomain.local port: 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: refcnt: 2 status: Connected Feb 20 12:21:20 sng02 dovecot: auth: Error: last used: Wed Feb 20 12:21:20 2013 Feb 20 12:21:20 sng02 dovecot: auth: Error: rebind in progress Feb 20 12:21:20 sng02 dovecot: auth: Error: queue is empty Feb 20 12:21:20 sng02 dovecot: auth: Error: Feb 20 12:21:20 sng02 dovecot: auth: Error: * host: localhost port: 389 (default) Feb 20 12:21:20 sng02 dovecot: auth: Error: refcnt: 2 status: Connected Feb 20 12:21:20 sng02 dovecot: auth: Error: last used: Wed Feb 20 12:21:20 2013 Feb 20 12:21:20 sng02 dovecot: auth: Error: Feb 20 12:21:20 sng02 dovecot: auth: Error: Feb 20 12:21:20 sng02 dovecot: auth: Error: ** ld 0x6cba60 Outstanding Requests: Feb 20 12:21:20 sng02 dovecot: auth: Error: * msgid 4, origid 4, status InProgress Feb 20 12:21:20 sng02 dovecot: auth: Error: outstanding referrals 0, parent count 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: * msgid 2, origid 2, status RequestCompleted Feb 20 12:21:20 sng02 dovecot: auth: Error: outstanding referrals 1, parent count 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ld 0x6cba60 request count 2 (abandoned 0) Feb 20 12:21:20 sng02 dovecot: auth: Error: ** ld 0x6cba60 Response Queue: Feb 20 12:21:20 sng02 dovecot: auth: Error: Empty Feb 20 12:21:20 sng02 dovecot: auth: Error: ld 0x6cba60 response count 0 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_chkResponseList ld 0x6cba60 msgid 4 all 1 Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_chkResponseList returns ld 0x6cba60 NULL Feb 20 12:21:20 sng02 dovecot: auth: Error: ldap_int_select Feb 20 12:21:20 sng02 dovecot: auth: Error: read1msg: ld 0x6cba60 msgid 4 all 1 Feb 20 12:21:20 sng02 dovecot: auth: Error: read1msg: ld 0x6cba60 msgid 4 message type bind Feb 20 12:21:20 sng02 dovecot: auth: Error: read1msg: ld 0x6cba60 0 new referrals Feb 20 12:21:20 sng02 dovecot: auth: Error: read1msg: mark request completed, ld 0x6cba60 msgid 4 Feb 20 12:21:22 sng02 postfix/smtpd[8928]: disconnect from localhost[127.0.0.1] Feb 20 12:23:55 sng02 dovecot: lda: Error: userdb lookup(marco.carcano): Request timed out Feb 20 12:23:55 sng02 dovecot: lda: Fatal: Internal error occurred. Refer to server log for more information. Feb 20 12:23:56 sng02 postfix/pipe[8897]: A38D4407F5: to=<marco.carcano @ mydomain.local>, orig_to=<mac @ mydomain.com>, relay=dovecot, delay=171, delays=16/0.01/0/155, dsn=4.3.0, status=deferred (temporary failure) Feb 20 12:24:10 sng02 dovecot: master: Warning: Killed with signal 15 (by pid=8946 uid=0 code=kill) Feb 20 12:24:10 sng02 dovecot: auth: ldap(marco.carcano): Shutting down Feb 20 12:24:10 sng02 dovecot: auth: Debug: master out: FAIL#0111 Feb 20 12:24:10 sng02 dovecot: auth: Error: ldap_unbind Feb 20 12:24:10 sng02 dovecot: auth: Error: ldap_free_request (origid 2, msgid 3) Feb 20 12:24:10 sng02 dovecot: auth: Error: ldap_free_request (origid 2, msgid 2) Feb 20 12:24:10 sng02 dovecot: auth: Error: ldap_free_connection 1 1 Feb 20 12:24:10 sng02 dovecot: auth: Error: ldap_send_unbind Feb 20 12:24:10 sng02 dovecot: auth: Error: ldap_free_connection: actually freed Feb 20 12:24:10 sng02 dovecot: auth: Error: ldap_free_connection 1 1 Feb 20 12:24:10 sng02 dovecot: auth: Error: ldap_send_unbind Feb 20 12:24:10 sng02 dovecot: auth: Error: ldap_free_connection: actually freed Feb 20 12:24:18 sng02 postfix/postfix-script[8962]: stopping the Postfix mail system Feb 20 12:24:18 sng02 postfix/master[8886]: terminating on signal 15 ############################## END OF FAULTY DELIVER LOG ############################################# I'll add the log of a succefully delivered message in another mail (otherwise I exceed message size limit of the list)

2 1

Re: [Dovecot] Dovecot LDA LDAP lookups on samba4 server ends very often in timeouts
by marco＠carcano.ch 20 Feb '13

20 Feb '13

just to complete the informations of this thread, here is the log of a mail delivered succesfully (trailing and leading spaces of AT charcater has been added by me) ############################## MAIL SUCCEFFULLY DELIVERED LOG ############################################# Feb 19 17:41:01 sng02 postfix/smtpd[4006]: connect from localhost[127.0.0.1] Feb 19 17:41:28 sng02 postfix/smtpd[4006]: 95659407F5: client=localhost[127.0.0.1] Feb 19 17:41:36 sng02 postfix/cleanup[4011]: 95659407F5: warning: header Subject: prova from localhost[127.0.0.1]; from=<marco @ senderdomain.tld> to=<mac @ mydomain.com> proto=SMTP helo=<senderdomain.tld> Feb 19 17:41:36 sng02 postfix/cleanup[4011]: 95659407F5: message-id=<20130219164128.95659407F5 @ srv01.mydomain.local> Feb 19 17:41:36 sng02 postfix/qmgr[3992]: 95659407F5: from=<marco @ senderdomain.tld>, size=371, nrcpt=1 (queue active) Feb 19 17:41:36 sng02 dovecot: lda: Debug: Loading modules from directory: /usr/lib64/dovecot Feb 19 17:41:36 sng02 dovecot: lda: Debug: Module loaded: /usr/lib64/dovecot/lib10_quota_plugin.so Feb 19 17:41:36 sng02 dovecot: lda: Debug: Module loaded: /usr/lib64/dovecot/lib20_expire_plugin.so Feb 19 17:41:36 sng02 dovecot: lda: Debug: Module loaded: /usr/lib64/dovecot/lib90_sieve_plugin.so Feb 19 17:41:36 sng02 dovecot: auth: Debug: master in: USER#0111#011marco.carcano#011service=lda Feb 19 17:41:36 sng02 dovecot: auth: Debug: password(marco.carcano): passdb doesn't support credential lookups Feb 19 17:41:36 sng02 dovecot: auth: Error: static(marco.carcano): passdb doesn't support lookups, can't verify user's existence Feb 19 17:41:36 sng02 dovecot: auth: Debug: ldap(marco.carcano): user search: base=DC=mydomain,DC=local scope=subtree filter=(sAMAccountname=marco.carcano) fields=Mailbox,dovecotMailQuota Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap(marco.carcano): Connection appears to be hanging, reconnecting Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_unbind Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_free_request (origid 2, msgid 3) Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_free_request (origid 2, msgid 2) Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_free_connection 1 1 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_send_unbind Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_free_connection: actually freed Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_free_connection 1 1 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_send_unbind Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_free_connection: actually freed Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_create Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_bind Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_simple_bind Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_sasl_bind Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_send_initial_request Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_new_connection 1 1 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_int_open_connection Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_connect_to_host: TCP localhost:389 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_new_socket: 16 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_prepare_socket: 16 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_connect_to_host: Trying ::1 389 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_pvt_connect: fd: 16 tm: -1 async: 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_open_defconn: successful Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_send_server_request Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_result ld 0x666a60 msgid -1 Feb 19 17:41:36 sng02 dovecot: auth: Error: wait4msg ld 0x666a60 msgid -1 (timeout 0 usec) Feb 19 17:41:36 sng02 dovecot: auth: Error: wait4msg continue ld 0x666a60 msgid -1 all 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ** ld 0x666a60 Connections: Feb 19 17:41:36 sng02 dovecot: auth: Error: * host: localhost port: 389 (default) Feb 19 17:41:36 sng02 dovecot: auth: Error: refcnt: 2 status: Connected Feb 19 17:41:36 sng02 dovecot: auth: Error: last used: Tue Feb 19 17:41:36 2013 Feb 19 17:41:36 sng02 dovecot: auth: Error: Feb 19 17:41:36 sng02 dovecot: auth: Error: Feb 19 17:41:36 sng02 dovecot: auth: Error: ** ld 0x666a60 Outstanding Requests: Feb 19 17:41:36 sng02 dovecot: auth: Error: * msgid 1, origid 1, status InProgress Feb 19 17:41:36 sng02 dovecot: auth: Error: outstanding referrals 0, parent count 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ld 0x666a60 request count 1 (abandoned 0) Feb 19 17:41:36 sng02 dovecot: auth: Error: ** ld 0x666a60 Response Queue: Feb 19 17:41:36 sng02 dovecot: auth: Error: Empty Feb 19 17:41:36 sng02 dovecot: auth: Error: ld 0x666a60 response count 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_chkResponseList ld 0x666a60 msgid -1 all 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_chkResponseList returns ld 0x666a60 NULL Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_int_select Feb 19 17:41:36 sng02 dovecot: auth: Error: read1msg: ld 0x666a60 msgid -1 all 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: read1msg: ld 0x666a60 msgid 1 message type bind Feb 19 17:41:36 sng02 dovecot: auth: Error: read1msg: ld 0x666a60 0 new referrals Feb 19 17:41:36 sng02 dovecot: auth: Error: read1msg: mark request completed, ld 0x666a60 msgid 1 Feb 19 17:41:36 sng02 dovecot: auth: Error: request done: ld 0x666a60 msgid 1 Feb 19 17:41:36 sng02 dovecot: auth: Error: res_errno: 0, res_error: <>, res_matched: <> Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_free_request (origid 1, msgid 1) Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_parse_result Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_search Feb 19 17:41:36 sng02 dovecot: auth: Error: put_filter: "(sAMAccountname=marco.carcano)" Feb 19 17:41:36 sng02 dovecot: auth: Error: put_filter: simple Feb 19 17:41:36 sng02 dovecot: auth: Error: put_simple_filter: "sAMAccountname=marco.carcano" Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_send_initial_request Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_send_server_request Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_search Feb 19 17:41:36 sng02 dovecot: auth: Error: put_filter: "(sAMAccountname=marco.carcano)" Feb 19 17:41:36 sng02 dovecot: auth: Error: put_filter: simple Feb 19 17:41:36 sng02 dovecot: auth: Error: put_simple_filter: "sAMAccountname=marco.carcano" Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_send_initial_request Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_send_server_request Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_msgfree Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_result ld 0x666a60 msgid -1 Feb 19 17:41:36 sng02 dovecot: auth: Error: wait4msg ld 0x666a60 msgid -1 (timeout 0 usec) Feb 19 17:41:36 sng02 dovecot: auth: Error: wait4msg continue ld 0x666a60 msgid -1 all 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ** ld 0x666a60 Connections: Feb 19 17:41:36 sng02 dovecot: auth: Error: * host: localhost port: 389 (default) Feb 19 17:41:36 sng02 dovecot: auth: Error: refcnt: 3 status: Connected Feb 19 17:41:36 sng02 dovecot: auth: Error: last used: Tue Feb 19 17:41:36 2013 Feb 19 17:41:36 sng02 dovecot: auth: Error: Feb 19 17:41:36 sng02 dovecot: auth: Error: Feb 19 17:41:36 sng02 dovecot: auth: Error: ** ld 0x666a60 Outstanding Requests: Feb 19 17:41:36 sng02 dovecot: auth: Error: * msgid 3, origid 3, status InProgress Feb 19 17:41:36 sng02 dovecot: auth: Error: outstanding referrals 0, parent count 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: * msgid 2, origid 2, status InProgress Feb 19 17:41:36 sng02 dovecot: auth: Error: outstanding referrals 0, parent count 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ld 0x666a60 request count 2 (abandoned 0) Feb 19 17:41:36 sng02 dovecot: auth: Error: ** ld 0x666a60 Response Queue: Feb 19 17:41:36 sng02 dovecot: auth: Error: Empty Feb 19 17:41:36 sng02 dovecot: auth: Error: ld 0x666a60 response count 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_chkResponseList ld 0x666a60 msgid -1 all 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_chkResponseList returns ld 0x666a60 NULL Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_int_select Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_result ld 0x666a60 msgid -1 Feb 19 17:41:36 sng02 dovecot: auth: Error: wait4msg ld 0x666a60 msgid -1 (timeout 0 usec) Feb 19 17:41:36 sng02 dovecot: auth: Error: wait4msg continue ld 0x666a60 msgid -1 all 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ** ld 0x666a60 Connections: Feb 19 17:41:36 sng02 dovecot: auth: Error: * host: localhost port: 389 (default) Feb 19 17:41:36 sng02 dovecot: auth: Error: refcnt: 3 status: Connected Feb 19 17:41:36 sng02 dovecot: auth: Error: last used: Tue Feb 19 17:41:36 2013 Feb 19 17:41:36 sng02 dovecot: auth: Error: Feb 19 17:41:36 sng02 dovecot: auth: Error: Feb 19 17:41:36 sng02 dovecot: auth: Error: ** ld 0x666a60 Outstanding Requests: Feb 19 17:41:36 sng02 dovecot: auth: Error: * msgid 3, origid 3, status InProgress Feb 19 17:41:36 sng02 dovecot: auth: Error: outstanding referrals 0, parent count 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: * msgid 2, origid 2, status InProgress Feb 19 17:41:36 sng02 dovecot: auth: Error: outstanding referrals 0, parent count 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ld 0x666a60 request count 2 (abandoned 0) Feb 19 17:41:36 sng02 dovecot: auth: Error: ** ld 0x666a60 Response Queue: Feb 19 17:41:36 sng02 dovecot: auth: Error: Empty Feb 19 17:41:36 sng02 dovecot: auth: Error: ld 0x666a60 response count 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_chkResponseList ld 0x666a60 msgid -1 all 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_chkResponseList returns ld 0x666a60 NULL Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_int_select Feb 19 17:41:36 sng02 dovecot: auth: Error: read1msg: ld 0x666a60 msgid -1 all 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: read1msg: ld 0x666a60 msgid 2 message type search-entry Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_msgfree Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_result ld 0x666a60 msgid -1 Feb 19 17:41:36 sng02 dovecot: auth: Error: wait4msg ld 0x666a60 msgid -1 (timeout 0 usec) Feb 19 17:41:36 sng02 dovecot: auth: Error: wait4msg continue ld 0x666a60 msgid -1 all 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ** ld 0x666a60 Connections: Feb 19 17:41:36 sng02 dovecot: auth: Error: * host: localhost port: 389 (default) Feb 19 17:41:36 sng02 dovecot: auth: Error: refcnt: 3 status: Connected Feb 19 17:41:36 sng02 dovecot: auth: Error: last used: Tue Feb 19 17:41:36 2013 Feb 19 17:41:36 sng02 dovecot: auth: Error: Feb 19 17:41:36 sng02 dovecot: auth: Error: Feb 19 17:41:36 sng02 dovecot: auth: Error: ** ld 0x666a60 Outstanding Requests: Feb 19 17:41:36 sng02 dovecot: auth: Error: * msgid 3, origid 3, status InProgress Feb 19 17:41:36 sng02 dovecot: auth: Error: outstanding referrals 0, parent count 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: * msgid 2, origid 2, status InProgress Feb 19 17:41:36 sng02 dovecot: auth: Error: outstanding referrals 0, parent count 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ld 0x666a60 request count 2 (abandoned 0) Feb 19 17:41:36 sng02 dovecot: auth: Error: ** ld 0x666a60 Response Queue: Feb 19 17:41:36 sng02 dovecot: auth: Error: Empty Feb 19 17:41:36 sng02 dovecot: auth: Error: ld 0x666a60 response count 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_chkResponseList ld 0x666a60 msgid -1 all 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_chkResponseList returns ld 0x666a60 NULL Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_int_select Feb 19 17:41:36 sng02 dovecot: auth: Error: read1msg: ld 0x666a60 msgid -1 all 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: read1msg: ld 0x666a60 msgid 2 message type search-reference Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_chase_v3referrals Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_url_parse_ext(ldap://mydomain.local/CN=Configuration,DC=mydomain,DC=local) Feb 19 17:41:36 sng02 dovecot: auth: Error: re_encode_request: new msgid 4, new dn <CN=Configuration,DC=mydomain,DC=local> Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_chase_v3referral: msgid 2, url "ldap://mydomain.local/CN=Configuration,DC=mydomain,DC=local" Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_send_server_request Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_new_connection 0 1 1 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_int_open_connection Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_connect_to_host: TCP mydomain.local:389 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_new_socket: 18 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_prepare_socket: 18 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_connect_to_host: Trying 192.168.32.2:389 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_pvt_connect: fd: 18 tm: -1 async: 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: anonymous rebind via ldap_sasl_bind("") Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_sasl_bind Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_send_initial_request Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_send_server_request Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_result ld 0x666a60 msgid 5 Feb 19 17:41:36 sng02 dovecot: auth: Error: wait4msg ld 0x666a60 msgid 5 (timeout 100000 usec) Feb 19 17:41:36 sng02 dovecot: auth: Error: wait4msg continue ld 0x666a60 msgid 5 all 1 Feb 19 17:41:36 sng02 dovecot: auth: Error: ** ld 0x666a60 Connections: Feb 19 17:41:36 sng02 dovecot: auth: Error: * host: mydomain.local port: 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: refcnt: 2 status: Connected Feb 19 17:41:36 sng02 dovecot: auth: Error: last used: Tue Feb 19 17:41:36 2013 Feb 19 17:41:36 sng02 dovecot: auth: Error: rebind in progress Feb 19 17:41:36 sng02 dovecot: auth: Error: queue is empty Feb 19 17:41:36 sng02 dovecot: auth: Error: Feb 19 17:41:36 sng02 dovecot: auth: Error: * host: localhost port: 389 (default) Feb 19 17:41:36 sng02 dovecot: auth: Error: refcnt: 4 status: Connected Feb 19 17:41:36 sng02 dovecot: auth: Error: last used: Tue Feb 19 17:41:36 2013 Feb 19 17:41:36 sng02 dovecot: auth: Error: Feb 19 17:41:36 sng02 dovecot: auth: Error: Feb 19 17:41:36 sng02 dovecot: auth: Error: ** ld 0x666a60 Outstanding Requests: Feb 19 17:41:36 sng02 dovecot: auth: Error: * msgid 5, origid 5, status InProgress Feb 19 17:41:36 sng02 dovecot: auth: Error: outstanding referrals 0, parent count 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: * msgid 3, origid 3, status InProgress Feb 19 17:41:36 sng02 dovecot: auth: Error: outstanding referrals 0, parent count 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: * msgid 2, origid 2, status InProgress Feb 19 17:41:36 sng02 dovecot: auth: Error: outstanding referrals 1, parent count 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ld 0x666a60 request count 3 (abandoned 0) Feb 19 17:41:36 sng02 dovecot: auth: Error: ** ld 0x666a60 Response Queue: Feb 19 17:41:36 sng02 dovecot: auth: Error: Empty Feb 19 17:41:36 sng02 dovecot: auth: Error: ld 0x666a60 response count 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_chkResponseList ld 0x666a60 msgid 5 all 1 Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_chkResponseList returns ld 0x666a60 NULL Feb 19 17:41:36 sng02 dovecot: auth: Error: ldap_int_select Feb 19 17:41:36 sng02 dovecot: auth: Error: read1msg: ld 0x666a60 msgid 5 all 1 Feb 19 17:41:36 sng02 dovecot: auth: Error: read1msg: ld 0x666a60 msgid 2 message type search-result Feb 19 17:41:36 sng02 dovecot: auth: Error: read1msg: ld 0x666a60 0 new referrals Feb 19 17:41:36 sng02 dovecot: auth: Error: read1msg: mark request completed, ld 0x666a60 msgid 2 Feb 19 17:41:36 sng02 dovecot: auth: Error: wait4msg ld 0x666a60 0 s 99954 us to go Feb 19 17:41:36 sng02 dovecot: auth: Error: wait4msg continue ld 0x666a60 msgid 5 all 1 Feb 19 17:41:36 sng02 dovecot: auth: Error: ** ld 0x666a60 Connections: Feb 19 17:41:36 sng02 dovecot: auth: Error: * host: mydomain.local port: 0 Feb 19 17:41:36 sng02 dovecot: auth: Error: refcnt: 2 status: Connected Feb 19 17:41:36 sng02 dovecot: auth: Error: last used: Tue Feb 19 17:41:36 2013 Feb 19 17:41:36 sng02 dovecot: auth: Error: rebind in progress Feb 19 17:41:36 sng02 dovecot: auth: Error: queue is empty Feb 19 17:41:36 sng02 dovecot: auth: Error: Feb 19 17:41:36 sng02 dovecot: auth: Error: * host: localhost port: 389 (default) Feb 19 17:41:36 sng02 dovecot: auth: Error: refcnt: 3 status: Connected Feb 19 17:41:36 sng02 dovecot: auth: Error: last used: Tue Feb 19 17:41:36 2013 Feb 19 17:41:36 sng02 dovecot: auth: Error: Feb 19 17:41:36 sng02 dovecot: auth: Error: Feb 19 17:41:36 sng02 dovecot: auth: Error: ** ld 0x666a60 Outstanding Requests: Feb 19 17:41:36 sng02 dovecot: lda: Debug: auth input: marco.carcano quota_rule=*:storage=8192M Feb 19 17:41:36 sng02 dovecot: lda: Debug: Added userdb setting: plugin/quota_rule=*:storage=8192M Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Effective uid=8, gid=12, home= Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Quota root: name=User quota backend=maildir args= Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Quota rule: root=User quota mailbox=* bytes=8589934592 messages=0 Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Quota rule: root=User quota mailbox=Trash bytes=+104857600 messages=0 Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Quota warning: bytes=8160437862 (95%) messages=0 reverse=no command=quota-warning 95 marco.carcano Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Quota warning: bytes=7301444403 (85%) messages=0 reverse=no command=quota-warning 85 marco.carcano Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Quota warning: bytes=6442450944 (75%) messages=0 reverse=no command=quota-warning 75 marco.carcano Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Quota root: name=Shared quota backend=maildir args=ns=Public/ Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Quota rule: root=Shared quota mailbox=* bytes=20971520000 messages=0 Feb 19 17:41:36 sng02 dovecot: lda: Error: user marco.carcano: Auth USER lookup failed Feb 19 17:41:36 sng02 dovecot: lda: Debug: auth input: Feb 19 17:41:36 sng02 dovecot: lda: Fatal: Internal error occurred. Refer to server log for more information. Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Namespace : type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/home/mailboxstore/marco.carcano/Maildir Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: maildir++: root=/home/mailboxstore/marco.carcano/Maildir, index=, control=, inbox=/home/mailboxstore/marco.carcano/Maildir Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Namespace : type=shared, prefix=shared/%u/, sep=/, inbox=no, hidden=no, list=children, subscriptions=no location=maildir:/home/mailboxstore/%Lu/Maildir:INDEX=/home/mailboxstore/marco.carcano/Maildir/shared/%Lu Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: shared: root=/var/run/dovecot, index=, control=, inbox= Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Namespace : type=public, prefix=Public/, sep=/, inbox=no, hidden=no, list=yes, subscriptions=no location=maildir:/home/mailboxstore/public Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: maildir++: root=/home/mailboxstore/public, index=, control=, inbox= Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: expire: No expire setting - plugin disabled Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Quota root: name=User quota backend=maildir args= Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Quota rule: root=User quota mailbox=* bytes=1073741824 messages=0 Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Quota rule: root=User quota mailbox=Trash bytes=+104857600 messages=0 Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Quota warning: bytes=1020054732 (95%) messages=0 reverse=no command=quota-warning 95 marco.carcano Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Quota warning: bytes=912680550 (85%) messages=0 reverse=no command=quota-warning 85 marco.carcano Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Quota warning: bytes=805306368 (75%) messages=0 reverse=no command=quota-warning 75 marco.carcano Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Quota root: name=Shared quota backend=maildir args=ns=Public/ Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: Quota rule: root=Shared quota mailbox=* bytes=20971520000 messages=0 Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: none: root=, index=, control=, inbox= Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Error: User marco.carcano doesn't have home dir set, disabling duplicate database Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: sieve: user's script path /home/mailboxstore/marco.carcano/.dovecot.sieve doesn't exist (using global script path in stead) Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: sieve: user has no valid personal script Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): Debug: sieve: no scripts to execute: reverting to default delivery. Feb 19 17:41:36 sng02 postfix/pipe[3995]: 7D9AE407E7: to=<marco.carcano @ mydomain.local>, orig_to=<mac @ mydomain.com>, relay=dovecot, delay=17102, delays=17034/0.05/0/68, dsn=4.3.0, status=deferred (temporary failure) Feb 19 17:41:36 sng02 dovecot: lda(marco.carcano): msgid=<20130219164128.95659407F5 @ srv01.mydomain.local>: saved mail to INBOX Feb 19 17:41:36 sng02 postfix/pipe[4013]: 95659407F5: to=<marco.carcano @ mydomain.local>, orig_to=<mac @ mydomain.com>, relay=dovecot, delay=22, delays=22/0.02/0/0.14, dsn=2.0.0, status=sent (delivered via dovecot service) Feb 19 17:41:36 sng02 postfix/qmgr[3992]: 95659407F5: removed Feb 19 17:41:38 sng02 postfix/smtpd[4006]: disconnect from localhost[127.0.0.1] ############################## END OF MAIL SUCCEFFULLY DELIVERED LOG #############################################

1 0

[Dovecot] Changin password in LDAP
by Arto Saraniva 20 Feb '13

20 Feb '13

We are using now dovecot 2.0.21 with open-ldap, but this situations has already taken a quite long time. When user changes the password, we have to reload dovecot every time, otherwise the change is ignored and dovecot sees only the old password. Any ideas where the problem might exist? Conf: # 2.0.21: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-308.24.1.el5 i686 CentOS release 5.9 (Final) auth_cache_size = 100 M auth_mechanisms = plain login auth_verbose = yes default_process_limit = 5000 disable_plaintext_auth = no info_log_path = /var/log/dovecot.log mail_location = maildir:~/Maildir:INDEX=/var/spool/indexes/%u managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mbox_write_locks = fcntl passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { quota = maildir:User Quota sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } postmaster_address = postmaster(a)artio.net service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } } service imap-login { service_count = 0 } service imap-postlogin { executable = script-login /usr/local/sbin/dovecot-postscript-imap user = root } service imap { executable = imap imap-postlogin } service pop3-postlogin { executable = script-login /usr/local/sbin/dovecot-postscript-pop3 user = root } service pop3 { executable = pop3 pop3-postlogin } ssl_ca = </usr/share/ssl/certs/mail_artio_net-2012-geotrust.ca ssl_cert = </usr/share/ssl/certs/mail_artio_net-2012-geotrust.crt ssl_key = </usr/share/ssl/private/mail_artio_net-2012-geotrust.key userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol lda { mail_plugins = sieve quota } protocol imap { mail_max_userip_connections = 50 mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota pop3_uidl_format = %08Xu%08Xv } Dovecot-ldap.conf: # NOTE: We don't support "authentication binds", so you'll have to give # dovecot-auth read access to userPassword field in LDAP server. With OpenLDAP # this is done by modifying /etc/ldap/slapd.conf. There should already be # something like this: # access to attribute=userPassword # by dn="<dovecot's dn>" read # add this # by anonymous auth # by self write # by * none # Space separated list of LDAP hosts to use. host:port is allowed too. #hosts = hosts = 123.123.123.123 123.123.123.124 # Distinguished Name - the username used to login to the LDAP server #dn = # Password for LDAP server #dnpass = # LDAP protocol version to use. Likely 2 or 3. ldap_version = 3 # LDAP base #base = uid=someone, dc=foo, dc=bar, dc=org base = dc=artio,dc=net # Dereference: never, searching, finding, always deref = never # Search scope: base, onelevel, subtree scope = subtree # User attributes in order: # Virtual user name (user@domain) # Home directory # MAIL environment # System user name (for getting user's groups from /etc/group) # - For virtual users you don't want to use this, so this defaults to none. # System UID # System GID #user_attrs = uid,homeDirectory,,,uidNumber,gidNumber # user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid # user_attrs = cn,homeDirectory,,uid,uidNumber,gidNumber #user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid user_attrs = homeDirectory=home,uidNumber=uid,gidNumber=gid,artioMailQuotaSize=quota_rule=*:storage=%$M # Filter for user lookup. Some variables can be used: # %u - username # %n - user part in user@domain, same as %u if there's no domain # %d - domain part in user@domain, empty if user there's no domain #user_filter = (&(objectClass=posixAccount)(uid=%u)) user_filter = (&(objectClass=posixAccount)(|(uid=%u)(mail=%u))) # Password checking attributes in order: # Virtual user name (user@domain) # Password, may optionally start with {type}, eg. {crypt} #pass_attrs = uid,userPassword # pass_attrs = cn,userPassword pass_attrs = uid=user, userPassword=password # Filter for password lookups #pass_filter = (&(objectClass=posixAccount)(uid=%u)) pass_filter = (&(objectClass=posixAccount)(|(uid=%u)(mail=%u))) # Default password scheme. "{scheme}" before password overrides this. # Currently supported schemes include PLAIN, PLAIN-MD5, DIGEST-MD5, CRYPT #default_pass_scheme = CRYPT default_pass_scheme = CRYPT # You can use same UID and GID for all user accounts if you really want to. # If the UID/GID is still found from LDAP reply, it overrides these values. #user_global_uid = #user_global_gid = Pam: /etc/pam.d/dovecot #%PAM-1.0 auth required pam_nologin.so auth include system-auth account include system-auth session include system-auth

1 0

[Dovecot] Dovecot 2 + Quota - CentOS 6.3
by drum.lucas＠gmail.com 20 Feb '13

20 Feb '13

Hello, I've a postfix+postfixadmin+mysql server+roundcubemail centos 6 mail server. My question is as follows: In postfixadmin it's possible that he show me how the mailbox is full. Show this information is dovecot service? What is the purpose of quota in dovecot? Thanks! *Lucas Possamai *

2 1

[Dovecot] 1.x with mbox files to 2.x with mdbox, I think?
by Ken A 20 Feb '13

20 Feb '13

Hi, I have a couple questions about migrating from 1.x to 2.x I'm needing to support larger mailbox sizes and mdbox seems like the right format to use to get larger size boxes and maintain, or possibly even increase speed. Is that correct? Am I correct that the best way to accomplish this migration is to copy the mboxes over to the new server and then use dsync to convert them to mdbox? Thanks for your thoughts! Ken -- Ken Anderson Pacific Internet - http://www.pacific.net Latest Pacific.Net Status - http://twitter.com/pacnetstatus

1 0

[Dovecot] Ping re: error running indexer-worker as non-root user
by Mike Abbott 19 Feb '13

19 Feb '13

Any hints about the issue I wrote about on Feb. 11? http://markmail.org/message/6g7itsu2u3fdnfkd Thanks.

1 0

[Dovecot] Dovecot-2.1.14 - pop3 processes always hangs forever - another follow-up
by Axel Luttgens 19 Feb '13

19 Feb '13

Hello, With the same basic configs as in my previous messages, I tried with the maildir format instead of the mbox format. That is, in both cases ("virtual" uids/gids vs a single "real" uid/gid), doveconf -n shows: mail_location = maildir:~/maildir instead of: mail_location = mbox:~/mboxes:INBOX=~/mboxes/inbox Here too, with "virtual" uids/gids, connections thru pop hang forever, while imap connections behave flawlessly. And with a single "real" uid/gid, connections thru both pop and imap behave as expected. As a result, it could be inferred that the problems I am encountering with pop connections do not depend on the mailbox format in use, and that they are entirely related to "virtual" uids/gids. To recap: with this very basic config # 2.1.14: /_ETC/dovecot/dovecot.conf # OS: Darwin 12.2.1 x86_64 auth_verbose = yes disable_plaintext_auth = no mail_debug = yes mail_location = mbox:~/mboxes:INBOX=~/mboxes/inbox passdb { args = /_ETC/dovecot/db.conf driver = sql } ssl = no userdb { driver = prefetch } a pop connection hangs forever after the pass command $ telnet 127.0.0.1 110 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. +OK Dovecot ready. user user2 +OK pass pass2 and the log shows (here, when the user connects for the first time) dovecot[2997]: pop3-login: Login: user=<user2>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=3113, secured, session=<GTOlMjfV3gB/AAAB> dovecot[2997]: pop3(user2): Debug: Effective uid=100003, gid=100003, home=/_Data/Mailstores/100003 dovecot[2997]: pop3(user2): Debug: Home dir not found: /_Data/Mailstores/100003 dovecot[2997]: pop3(user2): Debug: fs: root=/_Data/Mailstores/100003/mboxes, index=, control=, inbox=/_Data/Mailstores/100003/mboxes/inbox, alt= dovecot[2997]: pop3(user2): Debug: Namespace : /_Data/Mailstores/100003/mboxes doesn't exist yet, using default permissions dovecot[2997]: pop3(user2): Debug: Namespace : Using permissions from /_Data/Mailstores/100003/mboxes: mode=0700 gid=-1 dovecot[2997]: pop3(user2): Debug: Namespace : /_Data/Mailstores/100003/mboxes/inbox doesn't exist yet, using default permissions dovecot[2997]: pop3(user2): Debug: Namespace : Using permissions from /_Data/Mailstores/100003/mboxes: mode=0700 gid=-1 dovecot[2997]: pop3(user2): Debug: Namespace : /_Data/Mailstores/100003/mboxes/inbox doesn't exist yet, using default permissions dovecot[2997]: pop3(user2): Debug: Namespace : Using permissions from /_Data/Mailstores/100003/mboxes: mode=0700 gid=-1 With exactly the same config, imap connections are fully functional. Does someone have an explanation? TIA, Axel

2 11

[Dovecot] Defer emails until the user is ready to deal with them (snooze button / bring-forward file / bring-up file for emails)
by Chris Laif 19 Feb '13

19 Feb '13

Hi, I would like to add a feature to my email-client (Thunderbird) which stops emails from showing up until a specific time (e.g. having buttons for: show again this evening, tomorrow, next week, next month ...). As far as I've learned this is not possible with IMAP: - storing the 'do-not-show-until-time' within a custom header-field requires down- and uploading of the whole email and therefore causes problems especially with large emails - IMAP keywords are limited are limited in quantity and can not be compared with datetime functions Any suggestions will be greatly appreciated! Chris

6 20

[Dovecot] Get rid of inotify in 2.1.15
by Martin Rabl 19 Feb '13

19 Feb '13

Hi, after update to Dovecot 2.1.5 (Ubuntu 12.04, dovecot from https://launchpad.net/~kokelnet/+archive/dovecot21) we are getting a huge ;-) bunch of log entries about " imap(USERNAME): Warning: Inotify instance limit for user 5000 (UID vmail)". At last I did an echo 512 > /proc/sys/fs/inotify/max_user_instances but the logentries did appear again after some minutes. Maybe you have a hint for me? Thank you! At the bottom my current configuration. -- Greetings, Martin Rabl # 2.1.15: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-36-generic x86_64 Ubuntu 12.04.2 LTS auth_anonymous_username = anonymous auth_cache_negative_ttl = 1 hours auth_cache_size = 0 auth_cache_ttl = 1 hours auth_debug = no auth_debug_passwords = no auth_default_realm = auth_failure_delay = 2 secs auth_first_valid_uid = 500 auth_gssapi_hostname = auth_krb5_keytab = auth_last_valid_uid = 0 auth_master_user_separator = * auth_mechanisms = plain login auth_proxy_self = auth_realms = auth_socket_path = /var/run/dovecot/auth-userdb auth_ssl_require_client_cert = no auth_ssl_username_from_cert = no auth_use_winbind = no auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ auth_username_format = %Lu auth_username_translation = auth_verbose = no auth_verbose_passwords = no auth_winbind_helper_path = /usr/bin/ntlm_auth auth_worker_max_count = 30 base_dir = /var/run/dovecot config_cache_size = 1 M debug_log_path = default_client_limit = 1000 default_idle_kill = 1 mins default_internal_user = vmail default_login_user = vmail default_process_limit = 100 default_vsz_limit = 256 M deliver_log_format = msgid=%m: %$ dict { acl = mysql:/etc/dovecot/dovecot-dict-acl-sql.conf.ext } dict_db_config = director_doveadm_port = 0 director_mail_servers = director_servers = director_user_expire = 15 mins director_username_hash = %u disable_plaintext_auth = yes dotlock_use_excl = yes doveadm_allowed_commands = doveadm_password = doveadm_proxy_port = 0 doveadm_socket_path = doveadm-server doveadm_worker_count = 0 dsync_alt_char = _ dsync_remote_cmd = ssh -l%{login} %{host} doveadm dsync-server -u%u -l%{lock_timeout} -n%{namespace} first_valid_gid = 1 first_valid_uid = 500 hostname = imap_capability = imap_client_workarounds = imap_id_log = imap_id_send = imap_idle_notify_interval = 2 mins imap_logout_format = in=%i out=%o imap_max_line_length = 64 k imapc_features = imapc_host = imapc_list_prefix = imapc_master_user = imapc_max_idle_time = 29 mins imapc_password = imapc_port = 143 imapc_rawlog_dir = imapc_ssl = no imapc_ssl_ca_dir = imapc_ssl_verify = yes imapc_user = %u import_environment = TZ info_log_path = instance_name = dovecot last_valid_gid = 0 last_valid_uid = 0 lda_mailbox_autocreate = no lda_mailbox_autosubscribe = no lda_original_recipient_header = libexec_dir = /usr/lib/dovecot listen = * lmtp_address_translate = lmtp_proxy = no lmtp_rcpt_check_quota = no lmtp_save_to_detail_mailbox = no lock_method = fcntl log_path = syslog log_timestamp = "%Y-%m-%d %H:%M:%S " login_access_sockets = login_greeting = Dovecot ready. login_log_format = %$: %s login_log_format_elements = user=<%u> method=%m rip=%r lip=%l %c login_trusted_networks = mail_access_groups = vmail mail_attachment_dir = mail_attachment_fs = sis posix mail_attachment_hash = %{sha1} mail_attachment_min_size = 128 k mail_cache_fields = flags mail_cache_min_mail_count = 0 mail_chroot = mail_debug = no mail_fsync = optimized mail_full_filesystem_access = no mail_gid = mail_home = mail_location = maildir:~/Maildir:INBOX=~/Maildir/INBOX:LAYOUT=fs mail_log_prefix = "%s(%u): " mail_max_keyword_length = 50 mail_max_lock_timeout = 0 mail_max_userip_connections = 10 mail_never_cache_fields = imap.envelope mail_nfs_index = no mail_nfs_storage = no mail_plugin_dir = /usr/lib/dovecot/modules mail_plugins = mail_prefetch_count = 0 mail_privileged_group = vmail mail_save_crlf = no mail_shared_explicit_inbox = yes mail_temp_dir = /tmp mail_temp_scan_interval = 1 weeks mail_uid = vmail mailbox_idle_check_interval = 30 secs mailbox_list_index = no maildir_broken_filename_sizes = no maildir_copy_with_hardlinks = yes maildir_stat_dirs = no maildir_very_dirty_syncs = no managesieve_client_workarounds = managesieve_implementation_string = Dovecot Pigeonhole managesieve_logout_format = bytes=%i/%o managesieve_max_compile_errors = 5 managesieve_max_line_length = 65536 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave imapflags notify master_user_separator = mbox_dirty_syncs = yes mbox_dotlock_change_timeout = 2 mins mbox_lazy_writes = yes mbox_lock_timeout = 5 mins mbox_md5 = apop3d mbox_min_index_size = 0 mbox_read_locks = fcntl mbox_very_dirty_syncs = no mbox_write_locks = dotlock fcntl mdbox_preallocate_space = no mdbox_rotate_interval = 0 mdbox_rotate_size = 2 M mmap_disable = no namespace { disabled = no hidden = no ignore_on_failure = no inbox = no list = yes location = maildir:%%Lh/Maildir/:INDEX=%%Lh/shared-idx/%%u:INBOX=%%Lh/Maildir/INBOX:LAYOUT=fs prefix = shared/%%u/ separator = / subscriptions = no type = shared } namespace { disabled = no hidden = no ignore_on_failure = no inbox = no list = yes location = maildir:/srv/vmail/public:LAYOUT=fs prefix = public/ separator = / subscriptions = no type = public } namespace inbox { disabled = no hidden = no ignore_on_failure = no inbox = yes list = yes location = mailbox Drafts { auto = no special_use = \Drafts } mailbox Junk { auto = no special_use = \Junk } mailbox Sent { auto = no special_use = \Sent } mailbox "Sent Messages" { auto = no special_use = \Sent } mailbox Trash { auto = no special_use = \Trash } prefix = separator = / subscriptions = yes type = private } passdb { args = /etc/dovecot/passwd.masterusers default_fields = deny = no driver = passwd-file master = yes override_fields = pass = no } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext default_fields = deny = no driver = ldap master = no override_fields = pass = no } passdb { args = /etc/dovecot/dovecot-sql.conf.ext default_fields = deny = no driver = sql master = no override_fields = pass = no } plugin { acl = vfile acl_shared_dict = proxy::acl autocreate = Trash autocreate2 = Spam autocreate3 = Sent autocreate4 = Drafts autosubscribe = Trash autosubscribe2 = Spam autosubscribe3 = Sent autosubscribe4 = Drafts autosubscribe5 = public/Files autosubscribe6 = public/Groupware autosubscribe7 = public/EXAMPLE sieve = ~/.dovecot.sieve sieve_after = /srv/vmail/sieve/after.sieve sieve_before = /srv/vmail/sieve/before.sieve sieve_dir = ~/sieve sieve_extensions = +notify +imapflags sieve_global_dir = /srv/vmail/sieve sieve_global_path = /srv/vmail/sieve/globalsieverc } pop3_client_workarounds = pop3_enable_last = no pop3_fast_size_lookups = no pop3_lock_session = no pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s pop3_no_flag_updates = no pop3_reuse_xuidl = no pop3_save_uidl = no pop3_uidl_duplicates = allow pop3_uidl_format = %08Xu%08Xv pop3c_host = pop3c_master_user = pop3c_password = pop3c_port = 110 pop3c_rawlog_dir = pop3c_ssl = no pop3c_ssl_ca_dir = pop3c_ssl_verify = yes pop3c_user = %u postmaster_address = postmaster(a)EXAMPLE.de protocols = imap sieve quota_full_tempfail = yes recipient_delimiter = + rejection_reason = Your message to <%t> was automatically rejected:%n%r rejection_subject = Rejected: %s replication_full_sync_interval = 12 hours replication_max_conns = 10 replicator_host = replicator replicator_port = 0 sendmail_path = /usr/sbin/sendmail service aggregator { chroot = . client_limit = 0 drop_priv_before_exec = no executable = aggregator extra_groups = fifo_listener replication-notify-fifo { group = mode = 0600 user = } group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener replication-notify { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service anvil { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = anvil extra_groups = group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 1 protocol = service_count = 0 type = anvil unix_listener anvil-auth-penalty { group = mode = 0600 user = } unix_listener anvil { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service auth-worker { chroot = client_limit = 1 drop_priv_before_exec = no executable = auth -w extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 1 type = unix_listener auth-worker { group = mode = 0600 user = $default_internal_user } user = vsz_limit = 18446744073709551615 B } service auth { chroot = client_limit = 0 drop_priv_before_exec = no executable = auth extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } unix_listener auth-client { group = mode = 0600 user = } unix_listener auth-login { group = mode = 0600 user = $default_internal_user } unix_listener auth-master { group = vmail mode = 0600 user = vmail } unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } unix_listener login/login { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service config { chroot = client_limit = 0 drop_priv_before_exec = no executable = config extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = config unix_listener config { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service dict { chroot = client_limit = 1 drop_priv_before_exec = no executable = dict extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dict { group = vmail mode = 0660 user = vmail } user = $default_internal_user vsz_limit = 18446744073709551615 B } service director { chroot = . client_limit = 0 drop_priv_before_exec = no executable = director extra_groups = fifo_listener login/proxy-notify { group = mode = 00 user = } group = idle_kill = 4294967295 secs inet_listener { address = port = 0 ssl = no } privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener director-admin { group = mode = 0600 user = } unix_listener director-userdb { group = mode = 0600 user = } unix_listener login/director { group = mode = 00 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service dns_client { chroot = client_limit = 1 drop_priv_before_exec = no executable = dns-client extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dns-client { group = mode = 0666 user = } unix_listener login/dns-client { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service doveadm { chroot = client_limit = 1 drop_priv_before_exec = no executable = doveadm-server extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 1 type = unix_listener doveadm-server { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service imap-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = imap-login extra_groups = group = idle_kill = 0 inet_listener imap { address = port = 143 ssl = no } inet_listener imaps { address = port = 993 ssl = yes } privileged_group = process_limit = 0 process_min_avail = 0 protocol = imap service_count = 1 type = login user = $default_login_user vsz_limit = 18446744073709551615 B } service imap { chroot = client_limit = 1 drop_priv_before_exec = no executable = imap extra_groups = group = idle_kill = 0 privileged_group = process_limit = 2048 process_min_avail = 0 protocol = imap service_count = 1 type = unix_listener login/imap { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service indexer-worker { chroot = client_limit = 1 drop_priv_before_exec = no executable = indexer-worker extra_groups = group = idle_kill = 0 privileged_group = process_limit = 10 process_min_avail = 0 protocol = service_count = 0 type = unix_listener indexer-worker { group = mode = 0600 user = $default_internal_user } user = vsz_limit = 18446744073709551615 B } service indexer { chroot = client_limit = 0 drop_priv_before_exec = no executable = indexer extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener indexer { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service ipc { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = ipc extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener ipc { group = mode = 0600 user = } unix_listener login/ipc-proxy { group = mode = 0600 user = $default_login_user } user = $default_internal_user vsz_limit = 18446744073709551615 B } service lmtp { chroot = client_limit = 1 drop_priv_before_exec = no executable = lmtp extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = lmtp service_count = 0 type = unix_listener lmtp { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service log { chroot = client_limit = 0 drop_priv_before_exec = no executable = log extra_groups = group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = log unix_listener log-errors { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service managesieve-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = managesieve-login extra_groups = group = idle_kill = 0 inet_listener sieve { address = port = 4190 ssl = no } inet_listener sieve_deprecated { address = port = 2000 ssl = no } privileged_group = process_limit = 0 process_min_avail = 0 protocol = sieve service_count = 1 type = login user = $default_login_user vsz_limit = 18446744073709551615 B } service managesieve { chroot = client_limit = 1 drop_priv_before_exec = no executable = managesieve extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = sieve service_count = 1 type = unix_listener login/sieve { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service pop3-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = pop3-login extra_groups = group = idle_kill = 0 inet_listener pop3 { address = port = 110 ssl = no } inet_listener pop3s { address = port = 995 ssl = yes } privileged_group = process_limit = 0 process_min_avail = 0 protocol = pop3 service_count = 1 type = login user = $default_login_user vsz_limit = 18446744073709551615 B } service pop3 { chroot = client_limit = 1 drop_priv_before_exec = no executable = pop3 extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1024 process_min_avail = 0 protocol = pop3 service_count = 1 type = unix_listener login/pop3 { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service replicator { chroot = client_limit = 0 drop_priv_before_exec = no executable = replicator extra_groups = group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener replicator { group = mode = 0600 user = $default_internal_user } user = vsz_limit = 18446744073709551615 B } service ssl-params { chroot = client_limit = 0 drop_priv_before_exec = no executable = ssl-params extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = startup unix_listener login/ssl-params { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service stats { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = stats extra_groups = fifo_listener stats-mail { group = mode = 0600 user = } group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener stats { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } shutdown_clients = yes ssl = yes ssl_ca = </etc/ssl/imap.EXAMPLE.de-20110527-20160525.pem ssl_cert = </etc/ssl/imap.EXAMPLE.de-20110527-20160525.pem ssl_cert_username_field = commonName ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM ssl_client_cert = ssl_client_key = ssl_crypto_device = ssl_key = </etc/ssl/imap.EXAMPLE.de-20110527-20160525.pem ssl_key_password = ssl_parameters_regenerate = 1 weeks ssl_protocols = !SSLv2 ssl_require_crl = yes ssl_verify_client_cert = no stats_command_min_time = 1 mins stats_domain_min_time = 12 hours stats_ip_min_time = 12 hours stats_memory_limit = 16 M stats_session_min_time = 15 mins stats_user_min_time = 1 hours submission_host = syslog_facility = mail userdb { args = /etc/dovecot/dovecot-sql.conf.ext default_fields = driver = sql override_fields = } valid_chroot_dirs = verbose_proctitle = no verbose_ssl = no version_ignore = no protocol imap { imap_client_workarounds = delay-newmail tb-lsub-flags tb-lsub-flags tb-extra-mailbox-sep mail_max_userip_connections = 10 mail_plugins = acl imap_acl autocreate } protocol lda { deliver_log_format = msgid=%m: %$ mail_plugins = sieve autocreate postmaster_address = postmaster(a)EXAMPLE.de quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r } protocol sieve { managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave imapflags }

3 2

[Dovecot] statistics on proxy ???
by Marco Giunta 19 Feb '13

19 Feb '13

Hi at all, could I have imap statistics on my dovecot proxy server ?? Here my config: # 2.1.13: /etc/dovecot/dovecot.conf ... mail_plugins = stats ... plugin { ... stats_refresh = 30 secs stats_track_cmds = yes } ... service stats { fifo_listener stats-mail { mode = 0666 } } ... protocol imap { ... mail_plugins = stats imap_stats } File '/var/run/dovecot/stats' is always 0 byte: # ls -la /var/run/dovecot/stats srw-------. 1 root root 0 Feb 18 14:24 /var/run/dovecot/stats and 'dovecotadm' say always: # doveadm stats dump session doveadm(root): Info: no statistics available Is there something wrong in my config, or stats are not available on proxy ??? Cheers, Marco

2 2

[Dovecot] Private message flags in shared mailboxes
by Timo Sirainen 19 Feb '13

19 Feb '13

I'm wondering a bit how these should work. Comments welcome. In v2.2 the recommended way to enable private flags for shared mailboxes is to create private indexes with :INDEXPVT=<path>. This creates dovecot.index.pvt[.log] files which only contain message UIDs and flags. The indexes are updated somewhat lazily by updating them whenever user has the shared mailbox opened and it gets synced. 1. What would be a good place to configure which flags are shared and which are private? Currently it forces \Seen flag to be private and others not. With Maildir I used to have the idea of configuring these in dovecot-shared file, but that's a rather annoying extra file. Then again it could be cached into dovecot.index. Another possibility would be in dovecot-acl file, but public mailboxes might be enabled without ACL plugin. Mailbox attributes (for URLAUTH and for future METADATA) also exist in v2.2, but they require configuring a dict for them, which isn't very efficient either to read every time a mailbox is accessed. Mailbox's admin user should be able to do this somehow via IMAP protocol also. METADATA would pretty much be required for that I guess. 2. Private flags aren't currently inherited from the primary (shared) flags. With user-shared mailboxes this is good, because the owner doesn't have private indexes for the mailboxes, so when owner reads a mail it gets a \Seen flag in the primary index. If that mailbox was shared to someone else, the \Seen flag shouldn't be set. But this also means that for truly shared (public) mailboxes that have no owner you can't set initial flags with Sieve's addflag command (e.g. \Seen flag to high-scored mails in Spam). I guess it could be possible to change this so that the inheritance is done for public namespaces but not for shared namespaces, but is that really a good idea either?.. 3. Currently COPY/APPEND ignore any private flags (which also means dsync won't set them always). Fixing this would require remembering these flags, committing the save to primary index, syncing the private index to get the new mails added there, then updating their flags (or doing it directly at sync stage with some kludging code). To avoid race conditions the private index would need to be locked before committing the save. I guess this is doable.. 4. Private keywords aren't supported. I guess not much worse than system flags, but more code complexity. Wonder if anyone would care about them.

2 2

[Dovecot] Quota Problems with LMTP in HG 62a930eb22b5
by Thomas Leuxner 18 Feb '13

18 Feb '13

Since updating to the latest HG these errors occur. Nothing else changed in the config: $ dovecot --version 2.2.beta1 (62a930eb22b5) ==> /var/log/dovecot/dovecot.log <== Feb 18 09:47:32 spectre dovecot: lmtp(14340): Connect from local Feb 18 09:47:32 spectre dovecot: lmtp(14340, tlx(a)leuxner.net) Error: mkdir_parents(/var/vmail/domains/leuxner.net/tlx/mdbox) failed: File exists Feb 18 09:47:32 spectre dovecot: lmtp(14340, tlx(a)leuxner.net) Error: mkdir_parents(/var/vmail/domains/leuxner.net/tlx/mdbox) failed: File exists Feb 18 09:47:32 spectre dovecot: lmtp(14340, tlx(a)leuxner.net) Error: dict quota: Quota update failed, it's now desynced $ doveconf -n # 2.2.beta1 (62a930eb22b5): /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-0.bpo.4-amd64 x86_64 Debian 6.0.6 auth_cache_size = 16 k auth_verbose = yes mail_location = mdbox:~/mdbox mail_plugins = acl quota stats mailbox_list_index = yes namespace { list = yes location = mdbox:/var/vmail/public:INDEXPVT=~/mdbox/public prefix = Public/ separator = / subscriptions = no type = public } namespace inbox { hidden = no inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / type = private } passdb { args = username_format=%u /var/vmail/auth.d/%d/passwd driver = passwd-file } plugin { acl = vfile:/var/vmail/conf.d/%d/acls:cache_secs=300 mail_log_events = expunge mailbox_delete quota = dict:user::file:%h/mdbox/dovecot-quota quota_rule = *:storage=1GB quota_rule2 = Trash:storage=+10%% sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_global_dir = /var/vmail/conf.d/%d/sieve stats_refresh = 30s stats_track_cmds = yes } protocols = " imap lmtp" quota_full_tempfail = yes service auth-worker { unix_listener auth-worker { user = doveauth } user = doveauth } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } user = doveauth } service imap-login { inet_listener imap { address = 1.2.3.4 port = 143 } inet_listener imaps { port = 0 } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service stats { fifo_listener stats-mail { mode = 0600 user = vmail } } ssl_ca = </etc/ssl/certs/SSL123_CA_Bundle.pem ssl_cert = </etc/ssl/certs/host_domain_tld.crt ssl_key = </etc/ssl/private/host_domain_tld.key syslog_facility = local1 userdb { args = username_format=%u /var/vmail/auth.d/%d/passwd driver = passwd-file } verbose_proctitle = yes protocol lmtp { mail_plugins = acl quota stats sieve } protocol imap { mail_max_userip_connections = 20 mail_plugins = acl quota stats mail_log notify imap_acl imap_quota imap_stats }

2 3

[Dovecot] Dsync converting dbox->Maildir
by Anes Mukhametov 17 Feb '13

17 Feb '13

Hi! I've changed my mailbox format from dbox to Maildir. The problem is maildir message filename extension has no S=/W= field after migration. Using dovecot 2.1.15.

2 3

Re: [Dovecot] dovecot-uidlist crashing and re retriving messages by pop3 clients
by Piotr Rotter 17 Feb '13

17 Feb '13

I configure director temporary in some tricky way because I have to serve md5 and ntlm authentication method and I do not want reconfigure pop/imap servers. Can you confirm I done all ok becouse I have that issue: # doveadm director map doveadm(root): Error: User listing returned failure doveadm(root): Error: user listing failed user mail server ip expire time <unknown> 192.168.111.24 2013-02-14 00:57:34 <unknown> 192.168.111.21 2013-02-14 00:57:46 yet everything else works ok My password_query: password_query = SELECT clear AS password, 'Y' as proxy, '%u' AS destuser, clear AS pass FROM postfix_users WHERE email = '%u' My director server config (dovecot -n): # dovecot -n # 2.1.13: /etc/dovecot/dovecot.conf # OS: Linux 3.7.1-hardened-r2 x86_64 Gentoo Base System release 2.1 auth_mechanisms = plain login digest-md5 cram-md5 ntlm apop auth_verbose = yes default_client_limit = 10000 default_process_limit = 10000 default_vsz_limit = 512 M deliver_log_format = from=%f, msgid=%m, psize=%p: %$ director_mail_servers = 192.168.111.21 192.168.111.22 192.168.111.23 192.168.111.24 192.168.111.25 192.168.111.26 director_servers = 195.78.67.29 director_user_expire = 2 hours disable_plaintext_auth = no passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = box msgid from size } protocols = imap pop3 service auth { client_limit = 10000 unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } } service director { inet_listener { port = 9090 } unix_listener login/director { mode = 0666 } } service imap-login { executable = imap-login director } service pop3-login { executable = pop3-login director } ssl_ca = </etc/ssl/dovecot.ca ssl_cert = </etc/ssl/dovecot.crt ssl_key = </etc/ssl/dovecot.key

2 4

[Dovecot] Virtual Users Dovecot and Postfix
by Silvio Siefke 17 Feb '13

17 Feb '13

Hello, i want setup my Mailserver with the Tutorial on Dovecot Wiki. http://wiki2.dovecot.org/HowTo/VirtualUserFlatFilesPostfix I have one question for this, must i set the Mailadresses in /etc/postfix/virtual too or is the passwd File from dovecot enough? Thank you for help & Greetings Silvio

3 5

[Dovecot] doveadm -D quota get -u user
by Robert Schetterer 16 Feb '13

16 Feb '13

Hi Timo, just running into problems with doveadm -D quota get -u user doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib01_acl_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib15_notify_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib20_autocreate_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib20_expire_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib20_fts_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib20_listescape_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib20_mail_log_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib20_virtual_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib20_zlib_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib21_fts_lucene_plugin.so doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules/doveadm doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_acl_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_expire_plugin.so doveadm(root): Debug: Skipping module doveadm_quota_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_quota_plugin.so: undefined symbol: quota_user_module (this is usually intentional, so just ignore this message) doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_zlib_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/doveadm/lib20_doveadm_fts_lucene_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/doveadm/lib20_doveadm_fts_plugin.so doveadm(root): Fatal: Unknown command 'quota', but plugin quota exists. Try to set mail_plugins=quota should mail_plugins=quota really be set ? dovecot --version 2.1.12 (abcc9959b757) Best Regards MfG Robert Schetterer -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer Aufsichtsratsvorsitzender: Joerg Heidrich

2 2

[Dovecot] proxy imaps
by Antonio Casado Rodriguez 16 Feb '13

16 Feb '13

Hi all, I had a imaps dovecot server working normal. I wanted to isolate the Internet connection by placing a proxy imap(Intranet connections still connect directly to the imap server). Yesterday I set up oneproxy imaps dovecot and thereafter, imap dovecot logs on errors: imap-login: Error: OpenSSL malloc() failed. You may need to increase login_process_size Need dovecot more memory with imap proxy connections than direct connections? Regards -- Antonio Casado Rodríguez Administrador de Servicios de Red y Seguridad TIC Área de Comunicaciones STIC (Servicio de las Tecnologías de la Información y las Comunicaciones) UNIVERSIDAD DE ALMERÍA Este mensaje y los ficheros que puedan ser adjuntados son confidenciales. Los mismos contienen información reservada que no puede ser difundida. Si usted ha recibido este correo por error, tenga la amabilidad de eliminarlo de su sistema y avisar al remitente mediante reenvío a su dirección electrónica; no deberá copiar el mensaje ni divulgar su contenido a ninguna persona. Su dirección de correo electrónico junto a sus datos personales constan en un fichero titularidad de La UNIVERSIDAD DE ALMERÍA cuya finalidad es la de mantener el contacto con usted. Si quiere saber de qué información disponemos de usted, modificarla, y en su caso, cancelarla, puede hacerlo enviando un escrito al efecto, acompañado de una fotocopia de su D.N.I. a la siguiente dirección: UNIVERSIDAD DE ALMERÍA –. Secretaría General de La Universidad de Almería. Edificio Central, Planta baja. Ctra. Sacramento s/n, La Cañada de San Urbano. CP 04120 Almería

2 1

[Dovecot] Segfault with doveadm-server
by Evgeny Basov 16 Feb '13

16 Feb '13

Hello. With dovecot ver. from 20130211 I have a segfault on doveadm when sync. There are messages from server: 2013-02-14T12:42:35.508031+04:00 imap1 kernel: [870542.927083] doveadm-server[9483]: segfault at 4 ip 00000074b228bc24 sp 000003f30b8e61b0 error 4 in doveadm-server[74b226b000+3a000] or 2013-02-14T12:47:39.850942+04:00 imap1 kernel: [870847.279513] doveadm[9513]: segfault at 4 ip 00000006b31ac294 sp 000003dc5c669a90 error 4 in doveadm[6b3178000+5f000] I cannot catch process doveadm-server by strace because it starts with unknown PID on demand.

3 4

[Dovecot] dovecot-2.2: dsync to imapc not working
by Evgeny Basov 16 Feb '13

16 Feb '13

Hello. I have dovecot installation # dovecot --version 20130205 (03a0af22100d+) built with imapc backend. I'm tried to sync mailboxes from another server after clean mail directory localy: # dsync -v -o imapc_user="user(a)example.org" -o imapc_password="pass" -o imapc_host=imap.example.org -o imapc_features=rfc822.size -o mailbox_list_index=no backup -R -f -u "user(a)example.org" imapc: and get this message dsync(user(a)example.org): Error: Exporting mailbox INBOX failed: Backend doesn't support GUIDs, sync with header hashes instead Repeated command returns this one message: dsync(user(a)example.org): Error: Mailbox INBOX sync: mailbox_delete failed: INBOX can't be deleted. What wrong with this build? Maybe there is another way to do it? For example create backup in local temporary directory and synchronize this one and working storage.

2 3

[Dovecot] accumulating orphaned processes
by Jeff Gustafson 16 Feb '13

16 Feb '13

I'm getting orphaned processes on our mail servers. Some machines has processes hanging around from a week ago. I'm running the current stable of dovecot 2.1.15, but the problem has been happening for a while now. I thought it would be good to report the issue. I ran an strace on one of them and this is the output: Process 21370 attached - interrupt to quit open("/var/run/dovecot/stats-mail", O_WRONLY) = 7 write(7, "DISCONNECT\ta09ade0350d81d517a530"..., 44) = 44 munmap(0x7f1ad8a8d000, 266240) = 0 close(13) = 0 close(12) = 0 epoll_ctl(9, EPOLL_CTL_DEL, 11, {0, {u32=17384128, u64=17384128}}) = 0 close(11) = 0 close(7) = 0 munmap(0x7f1ada5d6000, 2106272) = 0 munmap(0x7f1ada7d9000, 2161360) = 0 munmap(0x7f1ada3cf000, 2124136) = 0 munmap(0x323c800000, 2162768) = 0 munmap(0x7f1ad9fc8000, 2102976) = 0 munmap(0x7f1ada1ca000, 2114728) = 0 epoll_ctl(9, EPOLL_CTL_DEL, 4, {0, {u32=17319120, u64=17319120}}) = 0 close(4) = 0 close(8) = 0 close(9) = 0 exit_group(0) = ? Process 21370 detached As you can see, the process exited at that point. Any ideas? ...Jeff

2 1

[Dovecot] Requested xxxx scheme, but we have a NULL password after upgrade
by PhilQ 15 Feb '13

15 Feb '13

I'm having an issue I can't seem to work around after upgrading from Dovecot 1.0.7 to 1.2.17. After getting Dovecot 1.07 working on CentOS 5.9, I decided that it might be wise to upgrade to a later version, so I stuck with 1.x and went with 1.2.17, which I had to compile from source. CentOS was originally using /etc as the starting path for Dovecot files but the source distribution puts most of the stuff under /usr/local/etc. After the usual config>make>make install dance I made the necessary changes to point to the new libraries, modules, etc. and the "imap-login: Fatal: Dovecot version mismatch: Master is v1.2.17, login is v1.0.7...." messages went away. After doing this though I cannot login, I get the following error messages: Feb 13 15:50:40 auth(default): Info: client in: AUTH 7 NTLM service=imap lip=192.168.2.102 rip=192.168.2.100 lport=143 rport=1470 Feb 13 15:50:40 auth(default): Info: client out: CONT 7 Feb 13 15:50:40 auth(default): Info: client in: CONT 7 TlRMTVNTUAABAAAAB4IIogAAAAAAAAAAAAAAAAAAAAAFASgKAAAADw== Feb 13 15:50:40 auth(default): Info: client out: CONT 7 TlRMTVNTUAACAAAAMAAwADAAAAAFAooATj7XW6ve2hwAAAAAAAAAADgAOABgAAAAUwBlAHIAdgBlAHIAMQAuAGgAZQByAHMAYwBoAGwAYQB1AHIAZQBuAC4AYwBvAG0AAwAwAFMAZQByAHYAZQByADEALgBoAGUAcgBzAGMAaABsAGEAdQByAGUAbgAuAGMAbwBtAAAAAAA= Feb 13 15:50:40 auth(default): Info: client in: CONT 7 TlRMTVNTUAADAAAAGAAYAGoAAABoAGgAggAAAAAAAABIAAAAEAAQAEgAAAASABIAWAAAAAAAAADqAAAABQKIAgUBKAoAAAAP*CENSORED*bgBiAFEAUwBFAC0AVwBJAE4AWABQAEXO6p/WuopqQ02x1kzJGW3NoQELKw32N88JqkbMOYOVErhiS492elwBAQAAAAAAA*CENSORED*ysN9jcAAAAAAwAwAFMAZQByAHYAZQByADEALgBoAGUAcgBzAGMAaABsAGEAdQByAGUAbgAuAGMAbwBtAAAAAAAAAAAA Feb 13 15:50:40 auth(default): Info: cache(pquesinb,192.168.2.100): miss Feb 13 15:50:40 auth(default): Info: passwd-file(pquesinb,192.168.2.100): lookup: user=pquesinb file=/etc/dovecot.users Feb 13 15:50:40 auth(default): Info: password(pquesinb,192.168.2.100): Requested NTLM scheme, but we have a NULL password Feb 13 15:50:40 auth(default): Info: cache(pquesinb,192.168.2.100): miss Feb 13 15:50:40 auth(default): Info: password(pquesinb,192.168.2.100): passdb doesn't support credential lookups Feb 13 15:50:40 auth(default): Info: cache(pquesinb,192.168.2.100): miss Feb 13 15:50:40 auth(default): Info: password(pquesinb,192.168.2.100): passdb doesn't support credential lookups Feb 13 15:50:40 auth(default): Info: cache(pquesinb,192.168.2.100): miss Feb 13 15:50:40 auth(default): Info: password(pquesinb,192.168.2.100): passdb doesn't support credential lookups Feb 13 15:50:40 auth(default): Info: cache(pquesinb,192.168.2.100): miss Feb 13 15:50:40 auth(default): Info: password(pquesinb,192.168.2.100): passdb doesn't support credential lookups Feb 13 15:50:42 auth(default): Info: client out: FAIL 7 user=pquesinb Looking at the log from the old version while it was working, I was getting messages like the following: dovecot: Feb 04 14:14:21 Info: imap-login: Login: user=<pquesinb>, method=NTLM, rip=192.168.2.100, lip=192.168.2.102 dovecot: Feb 04 14:14:21 Info: imap-login: Login: user=<pquesinb>, method=NTLM, rip=192.168.2.100, lip=192.168.2.102 dovecot: Feb 04 14:15:03 Info: IMAP(pquesinb): Disconnected: Logged out dovecot: Feb 04 14:15:03 Info: IMAP(pquesinb): Disconnected: Logged out dovecot: Feb 04 14:15:23 Info: imap-login: Login: user=<pquesinb>, method=NTLM, rip=192.168.2.100, lip=192.168.2.102 dovecot: Feb 04 14:15:23 Info: imap-login: Login: user=<pquesinb>, method=NTLM, rip=192.168.2.100, lip=192.168.2.102 dovecot: Feb 04 14:16:05 Info: IMAP(pquesinb): Disconnected: Logged out dovecot: Feb 04 14:16:05 Info: IMAP(pquesinb): Disconnected: Logged out /etc/dovecot.users contains a list of usernames. Is this error the result of additional security which has been incorporated into the later version of Dovecot, or is it because my installation of the later version from source is broken, somehow incompatible, etc? Dovecot was configured to use PAM and it appeared to know the password of my account, failing when it was entered incorrectly so I'm assuming that it was successfully using PAM. I kept the same syntax in the later config file. >From dovecot.conf: passdb pam { # [session=yes] [setcred=yes] [failure_show_msg=yes] [max_requests=<n>] # [cache_key=<key>] [<service name>] # # session=yes makes Dovecot open and immediately close PAM session. Some # PAM plugins need this to work, such as pam_mkhomedir. # # setcred=yes makes Dovecot establish PAM credentials if some PAM plugins # need that. They aren't ever deleted though, so this isn't enabled by # default. # # max_requests specifies how many PAM lookups to do in one process before # recreating the process. The default is 100, because many PAM plugins # leak memory. # # cache_key can be used to enable authentication caching for PAM # (auth_cache_size also needs to be set). It isn't enabled by default # because PAM modules can do all kinds of checks besides checking password, # such as checking IP address. Dovecot can't know about these checks # without some help. cache_key is simply a list of variables (see # doc/wiki/Variables.txt) which must match for the cached data to be used. # Here are some examples: # %u - Username must match. Probably sufficient for most uses. # %u%r - Username and remote IP address must match. # %u%s - Username and service (ie. IMAP, POP3) must match. # # The service name can contain variables, for example %Ls expands to # pop3 or imap. # # Some examples: # args = session=yes %Ls args = cache_key=%u dovecot #args = dovecot } If anyone could give me some ideas on where to go from here, I'd really appreciate it. If there's little chance of getting the newer version to work with CentOS 5 then I'm ready to just drop back to the older version. Thanks a bunch. - Phil Config info follows: [root@Server1 lda]# dovecot -n # 1.2.17: /usr/local/etc/dovecot.conf # OS: Linux 2.6.18-348.el5.centos.plusxen x86_64 CentOS release 5.9 (Final) log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot.log protocols: imap imaps pop3 pop3s ssl_cert_file: /etc/pki/dovecot/certs/dovecot.pem ssl_key_file: /etc/pki/dovecot/private/dovecot.pem disable_plaintext_auth: no login_dir: /usr/local/var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login max_mail_processes: 64 mail_location: maildir:~/Maildir maildir_very_dirty_syncs: yes mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 mail_log_max_lines_per_sec: 100 imap_client_workarounds(default): outlook-idle imap_client_workarounds(imap): outlook-idle imap_client_workarounds(pop3): lda: mail_plugin_dir: /usr/local/lib/dovecot/lda auth default: mechanisms: ntlm plain login digest-md5 cache_size: 16 cache_ttl: 90 verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: /etc/dovecot.users passdb: driver: pam args: cache_key=%u dovecot passdb: driver: passwd passdb: driver: shadow userdb: driver: passwd -- View this message in context: http://dovecot.2317879.n4.nabble.com/Requested-xxxx-scheme-but-we-have-a-NU… Sent from the Dovecot mailing list archive at Nabble.com.

1 2

Re: [Dovecot] Authentication with many Windows AD
by Antonio Alberola 14 Feb '13

14 Feb '13

Hi, > You can set as many databases as you want. Check this: > > http://wiki2.dovecot.org/PasswordDatabase > http://wiki2.dovecot.org/Authentication/MultipleDatabases This solution is valid if I have only one domain. In case you have more than one domain, you need authenticate in the appropriate LDAP server. Is That correct? I'm going to explain my particular case. I have five Windows domains with some users who belong to those domains. I also have other users who are authenticated with local UNIX accounts. The only thing that I can do (I think) is using a Radius server. But, I'd rather not use it.

2 1

Re: [Dovecot] Imap process crash: assertion failed: (full_fs_access)
by Joseph Tam 14 Feb '13

14 Feb '13

On Wed, 13 Feb 2013, dovecot-request(a)dovecot.org wrote: Timo Sirainen <tss(a)iki.fi> writes: >>>> Any guess at what would cause this? >>>>> Feb 7 21:20:53 server dovecot: imap(user): Panic: file >>>> mailbox-list-fs-iter.c: line 447 (fs_list_get_roots): assertion >>>> failed: (full_fs_access) >>> LIST command that had invalid parameters that somehow got through the >>> first validity check. What namespace config do you have? >> >> namespace { >> alias_for = >> hidden = yes >> list = no >> location = >> prefix = / >> separator = / >> } > > This one causes these crashes. Fixed in v2.2 now: http://hg.dovecot.org/dovecot-2.2/rev/fb367a977077 Thanks for diagnosing this. I'll probably remove this namespace or limp along until 2.2 becomes the latest stable release. I added this namespace alias in an abundance of caution: this was to prevent users from trying to peruse the entire file space e.g. /etc. A poor man's chroot. I didn't test this thoroughly to see if it actually did what it was supposed to. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Authentication with many Windows AD
by Antonio Alberola 14 Feb '13

14 Feb '13

Dear All, I'm a new user of Dovecot and I need support with the authentication process. I use Dovecot 2.0.9 and Postfix 2.6.6 on host x86_64-redhat-linux-gnu 2.6.32-279.14.1.el6.x86_64 CentOS release 6.3 (Final) I need to select the validation method depending on the user. I have users that have to be authenticate with UNIX account, and I have others thats have to be authenticate with Windows AD. For example, some sysadmins and special accounts needs validate with Unix accounts. Other normal users have to authenticate with Windows AD, I have many Windows controllers. Some users authenticate to a specific Windows AD and other users are validated in another one. How I can do this? Thank you very much. Antonio Alberola

3 2

[Dovecot] FreeBSD, Dovecot and ZFS
by Jason Lock 13 Feb '13

13 Feb '13

Mail Issues - FreeBSD Hello, my apologies if this may be the wrong forum but hoping that maybe someone might be able to provide some insight. Have a very sporadic and strange issue with our mail servers running Dovecot on FreeBSD. There are three servers hosting Dovecot with FreeBSD as the underlying operating system. All three connect to a NAS server, again running FreeBSD and ZFS. When the specific issue occurs, clients connecting to check mail via POP3 or IMAP experience long delays and timeouts. To the point where POP3 Logins fail due to the timeouts. The issue is further compounded by clients increasing the number of attempts to check mail. Part of the frustration in attempting to diagnose the issue is not knowing the root cause or symptom that initates the issue. Wondering if anyone has experienced anything similar, or suggestions on ways to help identify the root cause

5 6

[Dovecot] dovecot-uidlist crashing and re retriving messages by pop3 clients
by Piotr Rotter 13 Feb '13

13 Feb '13

Hello, I have issue with dovecot (v. 2.1.13)configuration after implementation dovecot-lda (I used maildrop earlier). Now i have 9 servers with storage by NFS v3. My problem is frequently dovecot-uidlist crashing. 2013-02-13T13:34:02.447969+01:00 k1 dovecot: imap(user(a)domain.com): Error: Broken file /path_to_mailbox/dovecot-uidlist line 3170: Invalid data: 2013-02-13T13:34:34.527715+01:00 k1 dovecot: pop3(user(a)domain.com): Error: Broken file /path_to_mailbox/dovecot-uidlist line 367: Invalid data: It happens few time in minute for diferent users and has effect to re retriving messages by pop3 clients. This my NFS mount options: (rw,tcp,vers=3,actimeo=0) 10-mail.conf options: mmap_disable = yes dotlock_use_excl = yes mail_fsync=always mail_nfs_storage = yes mail_nfs_index = yes lock_method = dotlock I do not know what I did wrong and how solve this issue. Maybe NFS v4 or fcntl locks or migration to pop3_uidl_format = %g will by solution. Please some hint. Please any help for solve this issue and sorry my english.

2 1

[Dovecot] backing up maildir dovecot files
by David Mehler 13 Feb '13

13 Feb '13

Hello, I'm having to migrate servers. Both are dovecot2 systems. I'm wanting to copy over my mail store from one system to the other. I'd like to preserve dates/times of emails. These are maildir setups on both boxes, I'd like to be as transparent to the end user as possible. I currently have the first dovecot system offline and the second dovecot system is offline. Recommendations? Thanks. Dave.

5 9

[Dovecot] dsync 2.1.10 does not correctly handle renames of mailbox subtrees
by Karol Jurak 13 Feb '13

13 Feb '13

Hi, It seems that dsync 2.1.10 does not correctly handle renames of mailbox subtrees. The scenario is as follows. There are two servers, A and B, both running dovecot 2.1.10 and configured to use mdbox. Automatic replication between them is disabled, ie. replication plugin is not active and replicator service has process_min_avail = 0. I perform the following actions: 1. On A: doveadm mailbox create -u test_user a a/b a/b/c d 2. On A: doveadm sync -u test_user -d The result is as expected: on both A and B there are a/b/c and d mailboxes. Now I connect to A via IMAP and rename a/b to d/b. The result is as expected: on A there are a and d/b/c mailboxes. Next I execute on A 'doveadm sync -u mailstoragetest -d' and now the result is not as expected: there are a/b/c and d/b subtrees on both A and B and a/b is just a directory, ie. it does not contain dbox-Mails (the rest are proper mailboxes). dovecot.mailbox.logs have the following records appended to them: A: #2112: rename 33259783092361d18c60ba1c7cfe973c (2013-02-12 10:42:55) - this probably is the rename of a/b to d/b (recursive, ie. including children - in this case a/b/c => d/b/c) by the IMAP client #2136: rename ee2be6da91ae879476b152d7ca041f1b (1970-01-01 01:00:00) - rename of d/b/c to a/b/c by dsync (unexpected/incorrect) B: #1104: rename 33259783092361d18c60ba1c7cfe973c (1970-01-01 01:00:00) - rename of a/b to d/b (non recursive) by dsync What seems to be missing is the record in A's dovecot.mailbox.log describing the rename of a/b/c to d/b/c (or in general case the set of records describing the renames of all the children of a/b). Would appending such records allow dsync to make correct decisions as to which mailboxes and on which servers to rename? Thanks for any help. # 2.1.10: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.1 auth_master_user_separator = * auth_username_format = %Ln default_vsz_limit = 2 G dotlock_use_excl = no dsync_remote_cmd = ssh -l%{login} %{host} doveadm dsync-server -u%u -l5 log_path = /var/log/dovecot.log log_timestamp = "%Y-%m-%d %H:%M:%S " mail_access_groups = mail mail_location = mdbox:~/mdbox:ALT=/var/vmail/alt/%n mail_plugins = acl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / } passdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } plugin { acl = vfile } protocols = imap lmtp pop3 service aggregator { fifo_listener replication-notify-fifo { mode = 0666 } unix_listener replication-notify { mode = 0666 } } service auth { executable = /usr/lib/dovecot/auth unix_listener auth-client { mode = 0660 } unix_listener auth-master { mode = 0600 } unix_listener auth-userdb { mode = 0666 } user = root } service dict { unix_listener dict { mode = 0666 } } service doveadm { process_min_avail = 1 service_count = 1024 } service imap-login { chroot = login executable = /usr/lib/dovecot/imap-login inet_listener imap { address = * port = 143 } service_count = 0 user = dovecot } service imap { executable = /usr/lib/dovecot/imap } service lmtp { inet_listener lmtp { port = 24 } process_limit = 48 } service pop3-login { chroot = login executable = /usr/lib/dovecot/pop3-login inet_listener pop3 { address = * port = 110 } service_count = 0 user = dovecot } service pop3 { executable = /usr/lib/dovecot/pop3 } ssl = no userdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep mail_plugins = acl } protocol lmtp { mail_plugins = acl } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } protocol lda { mail_plugins = acl } -- Karol Jurak

2 2

Re: [Dovecot] Imap process crash: assertion failed: (full_fs_access)
by Joseph Tam 13 Feb '13

13 Feb '13

Timo Sirainen <tss(a)iki.fi> writes: > > Any guess at what would cause this? > > > > Feb 7 21:20:53 server dovecot: imap(user): Panic: file > > mailbox-list-fs-iter.c: line 447 (fs_list_get_roots): assertion > > failed: (full_fs_access) > > LIST command that had invalid parameters that somehow got through the > first validity check. What namespace config do you have? I got more info from the user that had this problem. He reported that he was was setting up a new Email client (Nexus4 Android) and he sent me a screenshot of his setup. Everything look ordinary except perhaps the IMAP prefix set to "mail". My setup documents inform users to leave it blank, but sometimes they use "mail/", a holdover from the uw-imapd days. I provide some aliases for that, but I don't know what would happen if you leave off the trailing "/". My namespace settings as reported by dovecot -n: namespace { inbox = yes location = prefix = separator = / } (The following are aliases to keep backward compatibility) namespace { alias_for = hidden = yes list = no location = prefix = / separator = / } namespace { alias_for = hidden = yes list = no location = prefix = mail/ separator = / } namespace { alias_for = hidden = yes list = no location = prefix = ~/mail/ separator = / } namespace { alias_for = hidden = yes list = no location = prefix = ~%u/mail/ separator = / } I've asked the user to change his prefix, and he'll probably report back. Joseph Tam <jtam.home(a)gmail.com>

2 2

[Dovecot] Is there any way to mask or hide the INBOX label for Dovecot 1.2.x Shared Mailboxes?
by Jason Discount 13 Feb '13

13 Feb '13

Hello, I'm setting up a new Dovecot sever to replace an old Cyrus server, and need to keep things as consistent as possible. I have a couple local accounts, like junkmail and notjunkmail that users get shared access to, and can drop things in to train sa-update. However, when users share over junkmail's inbox, it's displayed in the hierarchy: • Other Users • junkmail • INBOX Is there any way to get junkmail's INBOX to just show up at Other Users/junkmail and not require that extra depth? • Other Users • junkmail I'm running Debian Squeeze and the standard dovecot package available therein: > # uname -a > Linux internet.digitalquay.com.au 2.6.32-5-xen-amd64 #1 SMP Sun Sep 23 13:49:30 UTC 2012 x86_64 GNU/Linux > #dovecot --version > 1.2.15 I'm running in a configuration where all mail is owned by the vmail user, due to the impression I'm under, that it's a better way if there is to be shared mailboxes. Relevant bits of dovecot -n: > mail_uid: vmail > mail_gid: vmail > mail_location: maildir:/var/spool/dovecot/user/%u > mail_plugins: acl imap_acl > namespace: > type: private > separator: / > inbox: yes > list: yes > subscriptions: yes > namespace: > type: shared > separator: / > prefix: Other Users/%%u/ > location: maildir:/var/spool/dovecot/user/%%u:INDEX="/var/spool/dovecot/user/%u/Other\ Users/%%u" > list: children > auth default: > passdb: > driver: ldap > args: /etc/dovecot/dovecot-ldap.conf > userdb: > driver: passwd > args: uid=vmail gid=vmail blocking=yes mail=maildir:/var/spool/dovecot/user/%u Am I barking up the wrong tree, or is this possible? Thanks, Jay

2 1

[Dovecot] Marking messages read / retaining date with Sieve
by Bret Martin 13 Feb '13

13 Feb '13

I'm trying to mark several hundred thousand messages as read as they are delivered via dovecot-lda(1). (I'm importing some mail from another format for migration purposes.) I've been able to do this with Sieve, but it has the side effect that the messages' received and saved dates are set to the current date, and Apple Mail (at least) uses one of these to display the message date. Without the Sieve filter in place, the dates are retained based on the From_ line as I would like. Does anyone know of any way I can either - retain the date when delivering using Sieve? - systematically mark a specific set of messages as read *after* delivery instead, perhaps with doveadm(1)? (even marking *everything* read would work in this particular case. I couldn't find any way to set flags with doveadm) Thanks, --Bret

2 5

[Dovecot] POLL: v2.2 to allow one mail over quota?
by Timo Sirainen 12 Feb '13

12 Feb '13

Currently if user is 1MB under quota and someone tries to deliver mail that is over 1MB, Dovecot rejects the mail. But smaller mails aren't rejected probably for days. So user might not even realize that they didn't receive one of the mails. Also having a user "almost over quota" is a rather strange state I think. So what do you think about v2.2 allowing delivery of one last mail even if it brings the user over quota? Except add a limit that if the message size is as much as the user's entire quota limit it wouldn't be added (or 50% or ..?). Also IMAP wouldn't allow this, since user would get an error anyway. I could make this also optional, but if nobody really wants to keep the old behavior there's really no point in adding the option.

20 27

[Dovecot] I can't sync with dsync and imapc
by Angel L. Mateo 12 Feb '13

12 Feb '13

Hello, I am deploying a new dovecot server to replace and old one, both of the with dovecot 2.1.9. Now I want to synchronize imap mailbox from the old to the new one. So, in my new server I run (whith a $ sudo dsync -v -D -o imapc_host="<oldserver>" -o imapc_password="<master password>" -o imapc_features=rfc822.size backup -R -f -u myuser(a)um.es imapc: doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib01_acl_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib02_lazy_expunge_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib10_quota_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib20_zlib_plugin.so doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules/doveadm doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_acl_plugin.so doveadm(root): Debug: Skipping module doveadm_expire_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_expire_plugin.so: undefined symbol: expire_set_deinit (this is usually intentional, so just ignore this message) doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_quota_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_zlib_plugin.so doveadm(root): Debug: Skipping module doveadm_fts_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib20_doveadm_fts_plugin.so: undefined symbol: fts_backend_rescan (this is usually intentional, so just ignore this message) doveadm(myuser(a)um.es): Debug: Added userdb setting: plugin/quota_rule=*:storage=10G doveadm(myuser(a)um.es): Debug: Effective uid=2012, gid=204, home=/home/buzones/b1/an/myuser doveadm(myuser(a)um.es): Debug: acl: No acl_shared_dict setting - shared mailbox listing is disabled doveadm(myuser(a)um.es): Debug: Quota root: name=User quota backend=dict args=:file:/home/buzones/b1/an/myuser/quota doveadm(myuser(a)um.es): Debug: Quota rule: root=User quota mailbox=* bytes=10737418240 messages=0 doveadm(myuser(a)um.es): Debug: Quota rule: root=User quota mailbox=Trash bytes=+1073741824 messages=0 doveadm(myuser(a)um.es): Debug: dict quota: user=myuser(a)um.es, uri=file:/home/buzones/b1/an/myuser/quota, noenforcing=0 doveadm(myuser(a)um.es): Debug: Namespace : type=private, prefix=, sep=., inbox=yes, hidden=no, list=yes, subscriptions=yes location=mdbox:/home/buzones/b1/an/myuser/mdbox:INDEX=/home/indexes/i1/an/myuser:ALT=/home/alt/a1/an/myuser doveadm(myuser(a)um.es): Debug: fs: root=/home/buzones/b1/an/myuser/mdbox, index=/home/indexes/i1/an/myuser, control=, inbox=, alt=/home/alt/a1/an/myuser doveadm(myuser(a)um.es): Debug: Namespace : Using permissions from /home/buzones/b1/an/myuser/mdbox: mode=0700 gid=-1 doveadm(myuser(a)um.es): Debug: acl: initializing backend with data: vfile doveadm(myuser(a)um.es): Debug: acl: acl username = myuser(a)um.es doveadm(myuser(a)um.es): Debug: acl: owner = 1 doveadm(myuser(a)um.es): Debug: acl vfile: Global ACL directory: (none) doveadm(myuser(a)um.es): Debug: Namespace : type=private, prefix=BORRADOS., sep=., inbox=no, hidden=yes, list=no, subscriptions=yes location=mdbox:/home/buzones/b1/an/myuser/expunged doveadm(myuser(a)um.es): Debug: fs: root=/home/buzones/b1/an/myuser/expunged, index=, control=, inbox=, alt= doveadm(myuser(a)um.es): Debug: Namespace BORRADOS.: Using permissions from /home/buzones/b1/an/myuser/expunged: mode=0700 gid=-1 doveadm(myuser(a)um.es): Debug: acl: initializing backend with data: vfile doveadm(myuser(a)um.es): Debug: acl: acl username = myuser(a)um.es doveadm(myuser(a)um.es): Debug: acl: owner = 1 doveadm(myuser(a)um.es): Debug: acl vfile: Global ACL directory: (none) dsync(myuser(a)um.es): Debug: Effective uid=2012, gid=204, home=/home/buzones/b1/an/myuser dsync(myuser(a)um.es): Debug: acl: No acl_shared_dict setting - shared mailbox listing is disabled dsync(myuser(a)um.es): Debug: Quota root: name=User quota backend=dict args=:file:/home/buzones/b1/an/myuser/quota dsync(myuser(a)um.es): Debug: Quota rule: root=User quota mailbox=* bytes=10737418240 messages=0 dsync(myuser(a)um.es): Debug: Quota rule: root=User quota mailbox=Trash bytes=+1073741824 messages=0 dsync(myuser(a)um.es): Debug: dict quota: user=myuser(a)um.es, uri=file:/home/buzones/b1/an/myuser/quota, noenforcing=0 dsync(myuser(a)um.es): Debug: Namespace : type=private, prefix=, sep=., inbox=yes, hidden=no, list=yes, subscriptions=yes location=imapc: dsync(myuser(a)um.es): Debug: imapc: root=, index=, control=, inbox=, alt= dsync(myuser(a)um.es): Debug: imapc(myotis30.um.es:143): Looking up IP address dsync(myuser(a)um.es): Debug: imapc(myotis30.um.es:143): Connecting to 155.54.211.169:143 dsync(myuser(a)um.es): Debug: imapc(myotis30.um.es:143): Server capabilities: IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN dsync(myuser(a)um.es): Debug: imapc(myotis30.um.es:143): Authenticating as master for user myuser(a)um.es dsync(myuser(a)um.es): Debug: imapc(myotis30.um.es:143): Server capabilities: IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE QUOTA ACL RIGHTS=texk dsync(myuser(a)um.es): Debug: imapc(myotis30.um.es:143): Authenticated successfully dsync(myuser(a)um.es): Debug: acl: initializing backend with data: vfile dsync(myuser(a)um.es): Debug: acl: acl username = myuser(a)um.es dsync(myuser(a)um.es): Debug: acl: owner = 1 dsync(myuser(a)um.es): Debug: acl vfile: Global ACL directory: (none) dsync(myuser(a)um.es): Debug: Namespace : type=private, prefix=BORRADOS., sep=., inbox=no, hidden=yes, list=no, subscriptions=yes location=mdbox:/home/buzones/b1/an/myuser/expunged dsync(myuser(a)um.es): Debug: fs: root=/home/buzones/b1/an/myuser/expunged, index=, control=, inbox=, alt= dsync(myuser(a)um.es): Debug: Namespace BORRADOS.: Using permissions from /home/buzones/b1/an/myuser/expunged: mode=0700 gid=-1 dsync(myuser(a)um.es): Debug: acl: initializing backend with data: vfile dsync(myuser(a)um.es): Debug: acl: acl username = myuser(a)um.es dsync(myuser(a)um.es): Debug: acl: owner = 1 dsync(myuser(a)um.es): Debug: acl vfile: Global ACL directory: (none) dsync(myuser(a)um.es): Debug: acl vfile: file /home/buzones/b1/an/myuser/mdbox/mailboxes/dovecot-acl not found dsync(myuser(a)um.es): Error: Failed to sync mailbox INBOX: Internal error occurred. Refer to server log for more information. [2013-02-12 13:52:29] dsync(myuser(a)um.es): Debug: acl vfile: file /home/buzones/b1/an/myuser/mdbox/mailboxes/INBOX/dbox-Mails/dovecot-acl not found dsync(myuser(a)um.es): Error: Can't delete mailbox INBOX: INBOX can't be deleted. dsync(myuser(a)um.es): Info: INBOX: only in dest (guid=edd76012063b1a5138270000a9061514) dsync(myuser(a)um.es): Error: Trying to open a non-listed mailbox with guid=edd76012063b1a5138270000a9061514 dsync(myuser(a)um.es): Error: msg iteration failed: Couldn't open mailbox edd76012063b1a5138270000a9061514 dsync(myuser(a)um.es): Error: Trying to open a non-listed mailbox with guid=edd76012063b1a5138270000a9061514 dsync(myuser(a)um.es): Debug: imapc(myotis30.um.es:143): Disconnected In the old server I get the error: Feb 12 13:52:29 myotis30 dovecot: imap(myuser(a)um.es): Error: Failed to autocreate mailbox INBOX: Permission denied Feb 12 13:52:29 myotis30 dovecot: imap(myuser(a)um.es): Debug: acl: Mailbox not in dovecot-acl-list: Archives Feb 12 13:52:29 myotis30 dovecot: imap(myuser(a)um.es): Debug: acl: Mailbox not in dovecot-acl-list: Archives.2012 Feb 12 13:52:29 myotis30 dovecot: imap(myuser(a)um.es): Debug: acl: Mailbox not in dovecot-acl-list: Sent Items So it seems dsync is trying to create a mailbox in the original server. What am I doing wrong? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868889150 Fax: 868888337

1 0

[Dovecot] Migration to Gmail ...
by Frank Bonnet 12 Feb '13

12 Feb '13

Hello Anyone has migrated Dovecot IMAP only mailboxes server to GMAIL ? We use MBOX format. Any feedback welcome ... Thanks you

3 2

[Dovecot] dovecot 2.2: doveadm-server crash in latest hg
by Oli Schacher 11 Feb '13

11 Feb '13

Hi Timo With the current hg (ed5fa76f0dc7), I get a crash as soon as I append a single message to a dsync replicated mailbox. Setup is the same as in the thread "dsync replication errors" ( http://www.dovecot.org/list/dovecot/2013-January/070574.html ) Feb 11 15:01:19 doco1 dovecot: imap-login: Login: user=<user1>, method=PLAIN, rip=192.168.23.130, lip=192.168.23.61, mpid=1709, session=<roTpV3PV1wDAqBeC> Feb 11 15:01:32 doco1 dovecot: doveadm: Fatal: master: service(doveadm): child 1713 killed with signal 11 (core dumped) Feb 11 15:01:56 doco1 dovecot: doveadm: Fatal: master: service(doveadm): child 1715 killed with signal 11 (core dumped) bt full is attached. Thanks, Oli -- message transmitted on 100% recycled electrons

1 0

[Dovecot] Keyword Flags
by David Woodfall 11 Feb '13

11 Feb '13

I mostly use Mutt to read mail but today I fired up Thunderbird. I have a shell script that looks for new mail, which looks for files in cur/ and new/ ending with the server hostname or a comma. When I fired up TB it seems that all new mail has been given a flag of ,a which I gather means it matches a keyword. My questions are: How did this happen? Did TB do something strange to my mail when it fetched headers? If I change my search parameters to ',[a-z]' will this only catch new mail? Cheers -- When all you have is a Swiss Army Knife, every problem looks like email. -- Peter da Silva

3 3

[Dovecot] Disabling auth caching just from one passdb
by Angel L. Mateo 11 Feb '13

11 Feb '13

Hello, I'm using various password databases (one of them is a ldap database, which is the used for users connecting with email clients, and the other with pam, using a pam module integrated with our SSO that is used from our webmail). I would like to disable password caching in my pam database (because 'passwords' provided by our SSO are single use tokens, so caching them has no benefit), but not in the ldap. As far as I know, auth_cache_size is the option to enable caching in all databases. But, is there any option I could use to disable it in a specific password database? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868889150 Fax: 868888337

2 1

Re: [Dovecot] Imap process crash: assertion failed: (full_fs_access)
by Joseph Tam 11 Feb '13

11 Feb '13

Any guess at what would cause this? Feb 7 21:20:53 server dovecot: imap(user): Panic: file mailbox-list-fs-iter.c: line 447 (fs_list_get_roots): assertion failed: (full_fs_access) (Sorry, no core dump) According to my logs, this user couldn't start an IMAP session for a 2 hour stretch for hundreds of connections. Then the problem seemed to have went away. I logged back as that user using a master password, but couldn't recreate this problem. The backtrace is just hex numbers (stripped executables) and I didn't drop privileges, so it refused to drop core, so that's no help. Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] Moving index files on another disk: no troubles but need more assurances
by Paolo Miotto 11 Feb '13

11 Feb '13

Hi, I'm using dovecot 1.2.15 on debian squeeze with maildir, and I want to move index files out of the mailboxes disk to reduce disk I/O. I need to get the assurance that the switch is completely transparent to my clients (IMAP and POP). I read the wiki documentation and have found this thread (http://dovecot.org/pipermail/dovecot/2009-September/042665.html) which makes me confident, even if it speaks of a older version and only pop3. So I set up a test server, copied a true mailbox and changed mail location from: mail_location = maildir:~/Maildir to mail_location = maildir:~/Maildir:INDEX=/srv/indexes/%1n/%n (all users under the same domain, no need to use %d). On the IMAP side all seems to work fine, new indexes are created in the new location (dovecot.index.log on 1st access, dovecot.index.cache on message manipolation). A test client (evolution) doesn't notice at all, and I have verified via a telnet imap session that UIDs don't change. But I see that when I move the indexes the IMAP HIGHESTMODSEQ response changes and is reset to 1. Can this baffle the clients? On the rfc I don't found reference to this status walking backwards. Need I to verify that all messages have the virtual size (W=nnnn) in the file name (the mailboxes are from a previous cyrus installation, then we switch to dovecot 1.2)? What other test you suggest that checking UIDL on the pop3 side? What happens if the indexes disk disappears (broken or removed from bay or all paths down for FC/iscsi)? Can dovecot 1.2 continue with INDEX=MEMORY as for a disk full? Sorry for the many questions.... Paolo ---------------------------------------------------------------------- SEMEL (SErvizio di Messaging ELettronico) - AINF, Universita' di Udine

2 1

[Dovecot] dovecot, postfix and sieve - broken by Ubuntu upgrade 10.10 -> 12.04
by Johan Helsingius 10 Feb '13

10 Feb '13

Hi! In upgrading from Ubuntu 10.10 to 12.04, my mail setup (dovecot using sieve and postfix) broke pretty badly. Have gotten teh imap server working, but local delivery doesn't work. - sieve gets called, but all "fileto" actions result in "failed to store into mailbox 'zzz': Mailbox doesn't exist: zzz Dovecot version is 2.0.19, configuration is: # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-37-generic i686 Ubuntu 12.04.2 LTS ext4 auth_mechanisms = plain login base_dir = /var/run/dovecot/ disable_plaintext_auth = no info_log_path = /var/log/dovecot.info listen = * log_path = /var/log/dovecot.log log_timestamp = "%Y-%m-%d %H:%M:%S " login_greeting = Mail server ready. mail_location = maildir:/srv/mail/%u mail_max_userip_connections = 256 mail_privileged_group = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mbox_dotlock_change_timeout = 10 mins mbox_lock_timeout = 20 mins mbox_very_dirty_syncs = yes passdb { driver = pam } plugin { sieve = /home/julf/sieve } protocols = imap service auth { unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { mode = 0600 } user = root } service imap-login { chroot = login user = dovecot } service managesieve-login { chroot = login user = dovecot } service pop3-login { chroot = login user = dovecot } ssl = no userdb { driver = passwd }

3 6

[Dovecot] cPanel && Dovecot 2.x
by Marc Jauvin 10 Feb '13

10 Feb '13

I would like to know if dovecot 2.0.9+ can work with cPanel. I know there is a template for it in cPanel 11.34.1, but when I tried to switch to 2.0.9 (from 1.2.17), it didn't work. I didn't put too much time to test it since I only have one live system to test it with, and I have many customers hosted on this server and I cannot disrupt the service. Has anyone been able to make this work, and if so, is there anything special to do other than rebuilding the config with "/scripts/builddovecotconf" ? Thanks.

2 1

[Dovecot] GSS-SPNEGO with dovecot and Outlook without Samba
by Julian David Rath 10 Feb '13

10 Feb '13

I am trying to configure a dovecot2 IMAP server to inter-operate with a active directory to authenticate users. The users should be able to login without a password on a domain-joined client(Outlook). Is it possible to do this only with kerberos? I don't want to put a crappy winbind on my mailserver... I already configured my server to authenticate via kerberos(GSSAPI), but Outlook does not even try to authenticate using GSSAPI, it rather uses PLAIN. I would appreciate any help, many thanks in advance.

2 1

[Dovecot] Dovecot 2.2.beta1
by Mark Sapiro 10 Feb '13

10 Feb '13

Just an FYI, I have been running 2.2.beta1 for a few days now with no problems, but I'm not using any of the new features ;) -- Mark Sapiro <mark(a)msapiro.net> The highway is for gamblers, San Francisco Bay Area, California better use your sense - B. Dylan

3 3

[Dovecot] GSS-SPNEGO with dovecot and Outlook without Samba
by Julian David Rath 09 Feb '13

09 Feb '13

I am trying to configure a dovecot2 IMAP server to inter-operate with a active directory to authenticate users. The users should be able to login without a password on a domain-joined client(Outlook). Is it possible to do this only with kerberos? I don't want to put a crappy winbind on my mailserver... I already configured my server to authenticate via kerberos(GSSAPI), but Outlook does not even try to authenticate using GSSAPI, it rather uses PLAIN. I would appreciate any help, many thanks in advance.

1 0

[Dovecot] dsync timeout?
by Micah Anderson 08 Feb '13

08 Feb '13

I'm using dsync for a regular backup. The backup system flocks so that two cannot run at the same time, which is generally a good thing. The problem is that it seems like dsync sometimes goes off into the weeds and never comes back, leaving a process running and doing nothing forever, hogging the lock and causing my backups never to run again. I just finally figured out that was what was causing the backups not to run on this system was this process: root 17836 0.0 0.0 40888 1600 ? S 2012 0:00 ssh -i /root/.ssh/backmaildir_id_rsa backmaildir@arg /usr/bin/dsync -u foobar server yeah, that has been running since 2012 :( root:/tmp# strace -p 17836 Process 17836 attached - interrupt to quit select(8, [4], [], NULL, NULL very exciting... There doesn't seem to be a timeout in dsync, but perhaps there should be? At this point my only option is to write a cronjob that will look for dsync processes that are over a certain amount of time old and then kill them, after I do that I will need to take a shower because that is a very dirty solution :P thanks for any ideas, or help! micah --

4 6

[Dovecot] Dovecot-2.1.14 - pop3 processes always hangs forever - a follow-up
by Axel Luttgens 08 Feb '13

08 Feb '13

Suspecting a problem with the "virtual" uids/gids, I've tried with a real user for the mail user: # 2.1.14: /_ETC/dovecot/dovecot.conf # OS: Darwin 12.2.1 x86_64 auth_verbose = yes disable_plaintext_auth = no mail_debug = yes mail_gid = dovemailer mail_location = mbox:~/mboxes:INBOX=~/mboxes/inbox mail_uid = dovemailer passdb { args = /_ETC/dovecot/db.conf driver = sql } ssl = no userdb { driver = prefetch } Of course, the db queries do not return uid/gid pairs anymore. And the pop3 processes now seem to work as expected; connecting for the first time as user1: $ telnet 127.0.0.1 110 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. +OK Dovecot ready. user user1 +OK pass pass1 +OK Logged in. list +OK 0 messages: . quit +OK Logging out. Connection closed by foreign host. Hmmm... Axel

1 0

[Dovecot] Dovecot-2.1.14 - pop3 processes always hangs forever
by Axel Luttgens 08 Feb '13

08 Feb '13

Hello, I'm currently experimenting with the 2.1.x series and am facing a behavior I can't explain; I must be doing something wrong and probably miss the obvious... ;-) This is a very basic build on Mac OS X 10.8.2: ./configure --prefix=/_COD/dovecot-2.1.14 --sysconfdir=/_ETC --localstatedir=/_VAR --with-sqlite --with-ldap=yes (Yes, I know, a strange layout, yet very convenient for testing various things here.) Dovecot's configuration is very basic too: # 2.1.14: /_ETC/dovecot/dovecot.conf # OS: Darwin 12.2.1 x86_64 auth_verbose = yes disable_plaintext_auth = no mail_debug = yes mail_location = mbox:~/mboxes:INBOX=~/mboxes/inbox passdb { args = /_ETC/dovecot/db.conf driver = sql } ssl = no userdb { driver = prefetch } It is started from launchd with the -F flag. Two users are defined in the database, user1 (100002/100002) and user2 (100003/100003), with "virtual" uids/gids. Connecting for the first time as user1 through imap: $ telnet 127.0.0.1 143 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready. a login user1 pass1 a OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE] Logged in b logout * BYE Logging out b OK Logout completed. Connection closed by foreign host. In mail.log: dovecot[2997]: imap-login: Login: user=<user1>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=3006, secured, session=<EOWWzjbVxQB/AAAB> dovecot[2997]: imap(user1): Debug: Effective uid=100002, gid=100002, home=/_Data/Mailstores/100002 dovecot[2997]: imap(user1): Debug: Home dir not found: /_Data/Mailstores/100002 dovecot[2997]: imap(user1): Debug: fs: root=/_Data/Mailstores/100002/mboxes, index=, control=, inbox=/_Data/Mailstores/100002/mboxes/inbox, alt= dovecot[2997]: imap(user1): Debug: Namespace : /_Data/Mailstores/100002/mboxes doesn't exist yet, using default permissions dovecot[2997]: imap(user1): Debug: Namespace : Using permissions from /_Data/Mailstores/100002/mboxes: mode=0700 gid=-1 dovecot[2997]: imap(user1): Disconnected: Logged out in=8 out=362 While logged in (ie after the login and before the logout), "doveadm who" shows: username # proto (pids) (ips) user1 1 imap (3093) (127.0.0.1) So far, so good. Now, let's connect as user2 for the first time, through pop: $ telnet 127.0.0.1 110 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. +OK Dovecot ready. user user2 +OK pass pass2 and the session hangs forever. This is written in the log: dovecot[2997]: pop3-login: Login: user=<user2>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=3113, secured, session=<GTOlMjfV3gB/AAAB> dovecot[2997]: pop3(user2): Debug: Effective uid=100003, gid=100003, home=/_Data/Mailstores/100003 dovecot[2997]: pop3(user2): Debug: Home dir not found: /_Data/Mailstores/100003 dovecot[2997]: pop3(user2): Debug: fs: root=/_Data/Mailstores/100003/mboxes, index=, control=, inbox=/_Data/Mailstores/100003/mboxes/inbox, alt= dovecot[2997]: pop3(user2): Debug: Namespace : /_Data/Mailstores/100003/mboxes doesn't exist yet, using default permissions dovecot[2997]: pop3(user2): Debug: Namespace : Using permissions from /_Data/Mailstores/100003/mboxes: mode=0700 gid=-1 dovecot[2997]: pop3(user2): Debug: Namespace : /_Data/Mailstores/100003/mboxes/inbox doesn't exist yet, using default permissions dovecot[2997]: pop3(user2): Debug: Namespace : Using permissions from /_Data/Mailstores/100003/mboxes: mode=0700 gid=-1 dovecot[2997]: pop3(user2): Debug: Namespace : /_Data/Mailstores/100003/mboxes/inbox doesn't exist yet, using default permissions dovecot[2997]: pop3(user2): Debug: Namespace : Using permissions from /_Data/Mailstores/100003/mboxes: mode=0700 gid=-1 while "doveadm who" pretends nobody is connected: username # proto (pids) (ips) To get rid of the pop3 process, I have to send it a KILL signal: no other way. But this is noticed by the master process: dovecot[2997]: pop3(user2): Fatal: master: service(pop3): child 3113 killed with signal 9 Note that it is possible to connect afterwards as user2 through imap. On the other hand, trying to connect as user1 or user2 through pop always hangs. TIA, Axel

1 0

[Dovecot] test
by Timo Sirainen 08 Feb '13

08 Feb '13

mailman archive process seems to have crashed and hasn't been writing to archives. lets see if it works again after restart..

1 0

[Dovecot] v2.1.15 released
by Timo Sirainen 08 Feb '13

08 Feb '13

http://dovecot.org/releases/2.1/dovecot-2.1.15.tar.gz http://dovecot.org/releases/2.1/dovecot-2.1.15.tar.gz.sig v2.1.14's dovecot.index.cache fixes caused Dovecot to use more disk I/O and memory than was necessary.

1 0

[Dovecot] user uknown
by Harford, Ken 08 Feb '13

08 Feb '13

Hi, I upgraded to version 2.1.1 from version 1.0.7 and I am having issues with postfix and dovecot reading my userdb file. Here is my dovecot config: # 2.1.1: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-308.1.1.el5 x86_64 CentOS release 5.7 (Final) auth_debug = yes auth_socket_path = /var/run/dovecot/auth-userdb default_internal_user = vmail default_login_user = dovecot disable_plaintext_auth = no auth_mechanisms = plain log_path = /var/log/dovecot.log mail_debug = yes mail_location = maildir:~/Maildir mbox_write_locks = fcntl namespace inbox { inbox = yes location = prefix = } passdb { args = username_format=%u /etc/dovecot.ctctmon/%d/userdb driver = passwd-file } postmaster_address = postmaster(a)example.com protocols = imap lmtp service auth { unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } service imap { process_limit = 1024 } ssl = required ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem Here is what I am seeing in logs: Dovecot: Feb 07 17:05:27 auth: Debug: master in: USER 1 ctctsc9@p2-ctctmon.<domain> service=lda Feb 07 17:05:27 auth: Debug: passwd-file(ctctsc9(a)p2-ctctmon.constantcontact.com): lookup: user=ctctsc9@p2-ctctmon.<domain> file=/etc/dovecot.ctctmon/p2-ctctmon.<domain>/userdb Feb 07 17:05:27 auth: Info: passwd-file(ctctsc9@p2-ctctmon.<domain>): unknown user Feb 07 17:05:27 lda: Debug: auth input: Feb 07 17:05:27 auth: Debug: master out: NOTFOUND 1 Postfix: Feb 7 17:07:51 p2-ctctmon101 postfix/pipe[17969]: C91831C8168: to=<ctctsc1(a)p2-ctctmon.domain>, relay=dovecot, delay=0.1, delays=0.09/0/0/0.02, dsn=5.1.1, status=bounced (user unknown) Userdb: ctctsc1:$1$e3k3Xp.u$QdSaJMh79dhivHUuaToDO0:::ctctsc1 Any ideas would be greatly appreciated!! Ken

2 1

[Dovecot] dsync: Invalid server handshake
by Dusan Zivadinovic 08 Feb '13

08 Feb '13

Hi list, I recently tried to backup mailboxes from an older server machine to a new one in order to move the service to the new machine. Both machines are in the same LAN, I used this command: dsync -R -u username backup ssh -i .ssh/id_rsa username(a)192.168.1.11 /opt/local/bin/dsync and I get this error: dsync-local(dz): Error: Invalid server handshake: dsync-server 2 dsync-remote(dz): Error: Invalid client handshake: dsync-client 1 # lokal machine: dovecot 2.0.19apple1 running on Mac OS X 10.8.2 Server using standard Apple-Dovecot-Configuration # remote machine: 2.1.12 running on Mac OS X 10.4 using PAM authentication I cant seem to find any documentation to this error, nor do I find any dsync entries in the logs of both machines. Does anyone have a hint? Thank you, Dusan

2 1

[Dovecot] File permissions used for automatically created mailbox
by Frerich Raabe 07 Feb '13

07 Feb '13

Hi, I'm running Dovecot 2.1.12 on FreeBSD (quite successfully so, thanks for this nice piece of software!). One thing which is slightly annoying though is that automatically created mailboxes (I have lda_mailbox_autocreate set) don't have the file permissions I'd like them to have. I'm using a vmail-based system, i.e. all mail is owned by vmail:vmail; another member of the vmail group is called 'backup', which has read access to all mail in order to create backups. All mail is stored beneath /home/vmail, e.g. /home/vmail/frerich/Maildir Right now, newly created mailbox directories (e.g. /home/vmail/bob) have 0700 permissions, but I'd like to have 0750 for all directories and 0640 for all files so that all files and directories are group-readable for backup purposes. Does anybody know whether this is configurable somehow? Right now, my workaround consists running this cron script every night: #!/bin/sh chown -R vmail:vmail /home/vmail/ find /home/vmail/ -type d -print0 | xargs -0 chmod 0750 find /home/vmail/ -type f -print0 | xargs -0 chmod 0640 -- Frerich Raabe - raabe(a)froglogic.com www.froglogic.com - Multi-Platform GUI Testing

2 1

Re: [Dovecot] Per user special-use folder names
by Joseph Tam 07 Feb '13

07 Feb '13

On Wed, 6 Feb 2013, Timo Sirainen wrote: >> On a related topic, what's the easiest way to alias various common >> mailbox names to one physical mailbox? For example, mapping "Trash", >> "Deleted Messages", "Junk" to the same mailbox? >> >> Would you use the SPECIAL-USE, or is there a better way to do this? >> Namescape configuration? Virtual plugin? > > Ideally SPECIAL-USE will take care of it in future. For now you should > configure it, but also realize that it won't work for all clients. > There's also mailbox_alias plugin in v2.1.10+: > http://wiki2.dovecot.org/Plugins/MailboxAlias (the link will work in a > few minutes). Perfect. I added a link to this page to the parent Plugins page Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] Subfolders problem
by Adam Maciejewski 06 Feb '13

06 Feb '13

I have moved from dovecot 1.x to 2.x and I have big problem with subfolders. When I'm moving subfolder with other subfolders is moving only main subfolder, without subfolders, example : mail-storage-1 /var/vmail/home/adamskitest/mdbox/mailboxes # find | egrep -e "janusz|jarek" ./jarek ./jarek/dbox-Mails ./jarek/dbox-Mails/dovecot.index.log ./jarek/jarek2 ./jarek/jarek2/dbox-Mails ./jarek/jarek2/dbox-Mails/dovecot.index.log ./jarek/jarek2/jarek3 ./jarek/jarek2/jarek3/dbox-Mails ./jarek/jarek2/jarek3/dbox-Mails/dovecot.index.log ./janusz ./janusz/dbox-Mails ./janusz/dbox-Mails/dovecot.index.log ./janusz/janusz2 ./janusz/janusz2/dbox-Mails ./janusz/janusz2/dbox-Mails/dovecot.index.log ./janusz/janusz2/janusz3 ./janusz/janusz2/janusz3/dbox-Mails ./janusz/janusz2/janusz3/dbox-Mails/dovecot.index.log And now I'm moving jarek2 with jarek3 as subfolder to janusz2 subfolder, result : mail-storage-1 /var/vmail/home/adamskitest/mdbox/mailboxes # find | egrep -e "janusz|jarek" ./jarek ./jarek/dbox-Mails ./jarek/dbox-Mails/dovecot.index.log ./jarek/jarek2 ./jarek/jarek2/jarek3 ./jarek/jarek2/jarek3/dbox-Mails ./jarek/jarek2/jarek3/dbox-Mails/dovecot.index.log ./janusz ./janusz/dbox-Mails ./janusz/dbox-Mails/dovecot.index.log ./janusz/janusz2 ./janusz/janusz2/dbox-Mails ./janusz/janusz2/dbox-Mails/dovecot.index.log ./janusz/janusz2/dbox-Mails/dovecot.index.cache ./janusz/janusz2/janusz3 ./janusz/janusz2/janusz3/dbox-Mails ./janusz/janusz2/janusz3/dbox-Mails/dovecot.index.log ./janusz/janusz2/jarek2 ./janusz/janusz2/jarek2/dbox-Mails ./janusz/janusz2/jarek2/dbox-Mails/dovecot.index.log As You can see there is jarek2 subfolder but jarek3 havent been moved. I can see this folder in Thunderbird, after clicking error message pops out saying folder dosent exist. -- Adam Maciejewski

2 3

[Dovecot] Sieve also filter outgoing messages
by Marcio Merlone 06 Feb '13

06 Feb '13

Greetings, A probably simple question and answer: can a sieve script be executed on outgoing messages? I already use deliver on postfix, perhaps the sieve script could be executed when saving to the Sent folder? Regards, -- Marcio Merlone

7 10

[Dovecot] Per user special-use folder names
by Radek Novotný 06 Feb '13

06 Feb '13

Hi all, let me ask a question, please. Is it possible in dovecot to set up per user special-use folder names? Imagine situation with two users where first prefere another language that second. mailbox Sent { special_use = \Sent } for english speaking users and mailbox "Odeslaná pošta" { special_use = \Sent } for czech speaking users. Thanks for your answers. Radek

4 3

Re: [Dovecot] Per user special-use folder names
by Joseph Tam 06 Feb '13

06 Feb '13

On Wed, 6 Feb 2013, Michael M Slusarz wrote: > Quoting Patrick Ben Koetter <p(a)sys4.de>: > >> That's part of what makes SPECIAL-USE so sexy. It is language independent. >> All it does is say "This mailbox is reserved for that particular usage." How >> you call it, is up to you (client). > > Well.... not quite. The problem comes when you have *multiple* sent > mailboxes on your server, which is perfectly acceptable and quite > useful (e.g. an MUA allows multiple identities, and each identity uses > a separate sent-mail mailbox). You can't just blindly show the local > translation for "Sent" for all of the mailboxes, or else you've now > eliminated the user's ability to differentiate between them. On a related topic, what's the easiest way to alias various common mailbox names to one physical mailbox? For example, mapping "Trash", "Deleted Messages", "Junk" to the same mailbox? Would you use the SPECIAL-USE, or is there a better way to do this? Namescape configuration? Virtual plugin? Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] saving to imap folders and namespace settings
by Gustavo Sansone 06 Feb '13

06 Feb '13

hello everyone, i'm new to this list im running dovecot as imap+pop (2.1.12) and roundcube (0.8.4) as client. having problems on saving to imap folders, with errors on some accounts my folder structure is as follow: /home/user/.maildir /home/user/.maildir/.Drafts /home/user/.maildir/.Junk /home/user/.maildir/.Sent /home/user/.maildir/.Trash /home/user/.maildir/.Archives /home/user/.maildir/.Archives.2010 ... i'm very confused with the namespace settings. i don't understand what is the correct way to configure it. don't need public or shared folders. on dovecot.log i can see this error with my account (and all the others), but it seems to work ok using roundcube: imap(gsansone): Error: autocreate: No namespace found for mailbox: Junk with a few accounts, i have this on roundcube log: IMAP Error: Could not save message in Drafts in /var/www/localhost/htdocs/mail/program/steps/mail/sendmail.inc with error on saving to imap folder in roundcube UI send you attached the output of 'dovecot -n' and the roundcube configuration related to folders. does anyone have any suggestion? thanks in advance. -- G. Sansone

2 4

[Dovecot] Trouble when set mail_nfs_index = yes
by Rafael VOlpe TI 06 Feb '13

06 Feb '13

Hi Buddies, dovecot-sql.conf driver = mysql connect = host=127.0.0.1 dbname=postfix user=postfix password=secret default_pass_scheme = plain password_query = SELECT username as user, password \ FROM mailbox WHERE username = '%u' AND active = 1 user_query = SELECT concat("/var/vmail/", maildir) as home, 125 as uid, 125 as gid FROM mailbox WHERE username = '%u' Version: 2.0.19: /etc/dovecot/dovecot.conf doveconf: Warning: NOTE: You can get a new clean config file with: doveconf -n > dovecot-new.conf doveconf: Warning: Obsolete setting in /etc/dovecot/conf.d/10-mail.conf:157: fsync_disable has been renamed to mail_fsync # OS: Linux 3.2.0-37-generic x86_64 Ubuntu 12.04.2 LTS auth_mechanisms = plain login auth_verbose = yes debug_log_path = /var/log/dovecot-debug.log disable_plaintext_auth = no dotlock_use_excl = no first_valid_gid = 125 first_valid_uid = 125 last_valid_gid = 125 last_valid_uid = 125 log_path = /var/log/dovecot.log mail_debug = yes mail_location = maildir:/%Lh/:INDEX=/%Lh/ mail_nfs_storage = yes mmap_disable = yes passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } protocols = " imap pop3" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } ssl_cert = </etc/postfix/ssl/mail.hiway.com.br.crt ssl_key = </etc/postfix/ssl/mail.hiway.com.br.key userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } verbose_proctitle = yes protocol imap { imap_idle_notify_interval = 2 mins mail_max_userip_connections = 150 } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } ##EOF I use mailbox in nfs share. When i set the option "mail_nfs_index = yes" the dovecot fails to start. Looking at logs, only prompted this: "Feb 6 11:07:25 picapau kernel: [ 1436.376023] init: dovecot main process (4177) terminated with status 89" without more info.

2 1

[Dovecot] Sieve not filtering
by Nicolas Mora 06 Feb '13

06 Feb '13

Hello, I installed a few weeks ago the Dovecot package on a Debian stable along with postfix, everything works fine except the sieve filter. I followed the howto found on the internet (google: debian postfix dovecot sieve). I'm able to view and modify sieve rules with roundcube or thunderbird plugins, but the rules are not applied when a message arrives and all messages arrive in INBOX. Here is the content of my configuration files concerning sieve : dovecot.conf protocols = imap imaps managesieve protocol managesieve { listen = *:2000 } protocol managesieve { mail_executable = /usr/lib/dovecot/managesieve managesieve_max_line_length = 65536 managesieve_logout_format = bytes=%i/%o } protocol lda { postmaster_address = postmaster(a)babelouest.org mail_plugins = sieve mail_plugin_dir = /usr/lib/dovecot/modules/lda log_path = info_log_path = syslog_facility = mail } plugin { sieve_dir=~/Maildir/sieve } And the postfix/main.cf config file contains for dovecot sieve the following maibox_command = /usr/lib/dovecot/dovecot-lda -f "$SENDER" -a "$RECIPIENT" dovecot_destination_recipient_limit = 1 virtual_transport = dovecot I also tried the command mailbox_command = /usr/lib/dovecot/deliver it didn't work either... Is there somthing so obvious that I didn't see it ? Thanks in advance

2 1

[Dovecot] move mail from server with v1.0 to server w. v2.1?
by Frank Lienhard 06 Feb '13

06 Feb '13

I'm about to replace my old server. Both servers are on my internal network. The old one ist running debian lenny(32bit) with dovecot 1.0.15 and the new one debian Wheezy with dovecot 2.1.7. I set up the users on both systems identically (same gid uid). My first attempt was tho simply rsync the Maildirs along with the homes. Both deovecot versions are set up with the maildir format, but this results in ~30% doublicated mails on the new server. I then learned about doveadm/dsync, only to figure out that this isn't available in v 1.0.15 and therefor won't work. So which could be the most painless way to solve that?

5 8

[Dovecot] Dovecot main process killed by KILL signal
by For＠ll 06 Feb '13

06 Feb '13

Hi, I have a dovecot 2.0.7 installed on ubuntu 12.10 and often in dmesg I see "init: dovecot main process (7104) killed by KILL signal", I must restarted dovecot, because I can't access to mailbox. Server hardware: 2x1TB disks 4GB memory 1xCPU 2,4GHz HARDWARE RAID 1 Mailbox ~ 1k dovecot.conf # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.5.0-22-generic x86_64 Ubuntu 12.10 xfs auth_mechanisms = plain login auth_verbose = yes default_client_limit = 1500 info_log_path = /var/log/dovecot.info log_path = /var/log/dovecot.log log_timestamp = "%Y-%m-%d %H:%M:%S " mail_location = maildir:/var/mail/virtual/%d/%n/ maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { inbox = yes location = prefix = INBOX. separator = . type = private } passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } passdb { driver = pam } plugin { sieve_dir = /var/mail/virtual/%d/%n/sieve sieve_global_dir = /var/mail/virtual/sieve } protocols = sieve imap pop3 service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { mode = 0600 user = vmail } user = root } service imap-login { inet_listener imap { port = 0 } process_limit = 512 } service imap { process_limit = 512 service_count = 0 } service managesieve-login { inet_listener sieve { port = 33919 } } service pop3-login { inet_listener pop3 { port = 0 } } ssl_cert = </etc/postfix/rssl/ssl.crt ssl_key = </etc/postfix/rssl/ssl.key userdb { args = uid=1003 gid=1003 home=/var/mail/virtual/%d/%n allow_all_users=yes driver = static } userdb { driver = passwd } verbose_proctitle = yes protocol lda { auth_socket_path = /var/run/dovecot/auth-master info_log_path = /var/log/dovecot-lda.log lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes log_path = /var/log/dovecot-lda-errors.log mail_plugins = sieve } protocol sieve { disable_plaintext_auth = no } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } Any ideas what's wrong, where is the problem?

2 2

[Dovecot] dsync backup questions
by Joe Beaubien 06 Feb '13

06 Feb '13

Hi, I'm currently trying to setup remote backups of my emails but i'm running into issues (mdbox format, indexes and storage in the same folder hierarchy). Local backup command: dsync -u "my_user" backup /backups/my_user (1) Recently, I noticed that the local backup takes up twice the size as the original mail location (8gb vs. 4gb). I purged alot of emails from the original location, so the size shrunk, but the local backup just keeps on getting bigger. I couldn't find any dsync option that would delete extra emails. - Question: Why isn't the local backup synced properly and remove the extra emails? (2) What is the best why to copy this local backup to a remote location that does NOT have the possibility to run dsync. - Question 1: is rsync safe to use and will this data work for restore? - Question 2: Would it be safe to simply rsync the original mail_location to the remote server? I searched the net, but it seems that mdbox is tricky to backup. Thanks in advance, -Joe

3 4

[Dovecot] Out of memory after upgrading to dovecot 2.0.21
by Arnaud Abélard 05 Feb '13

05 Feb '13

Hello, I've upgraded our servers and now dovecot seems to be running out of memory when accessing my own mailbox (and only mine, which is in a way pretty fortunate): dovecot: imap(abelard-a): Error: mmap() failed with file /vmail/a/b/abelard-a/dovecot.index.cache: Cannot allocate memory imap(abelard-a): Fatal: pool_system_realloc(131072): Out of memory /vmail/a/b/abelard-a/dovecot.index.cache is 224MB big and my mailbox is 72% full of 8GB. any idea of what is happening? Thanks in advance, Arnaud -- Arnaud Abélard jabber: arnaud.abelard(a)univ-nantes.fr / twitter: ArnY Administrateur Système DSI Université de Nantes -

3 5

[Dovecot] Using Mutt - folder atime/mtime etc
by David Woodfall 05 Feb '13

05 Feb '13

Version 2.1.10 For some reason Mutt doesn't list any info about IMAP folders and seems to ignore folder_format. My questions is does anyone have any workarounds for this?

3 4

[Dovecot] Upgrade from 2.1.13 to 2.1.14 and load doubled
by Alessio Cecchi 05 Feb '13

05 Feb '13

Hi, during the weekend I upgrade my mail servers from dovecot 2.1.13 to dovecot 2.1.14 (and rebuild dovecot-2.1-pigeonhole-0.3.3). After upgrade all works fine, but today the load avarage un MXs is doubled. Mailboxes are in Maildir/ on NFS and I'm using dovecot as LDA and dict quota only for quota usage. May be a problem with the new version? This is my configuration: $ ./configure --prefix=/usr/local/dovecot-2.1 --with-vpopmail --with-mysql --with-bzlib --with-zlib # cat /usr/local/dovecot-2.1/etc/dovecot/sieve/default.sieve require ["vnd.dovecot.duplicate", "fileinto", "mailbox"]; if header :contains "X-Spam-Status" "Yes" { fileinto "Spam"; } if header :contains "Subject" "TEST 123" { fileinto "Spam"; } if duplicate { fileinto "Trash"; } ##################### # 2.1.14: /usr/local/dovecot-2.1/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.6 auth_cache_size = 512 k auth_worker_max_count = 60 default_login_user = nobody dict { acl = mysql:/usr/local/dovecot-2.1/etc/dovecot/dovecot-share-folder.conf expire = mysql:/usr/local/dovecot-2.1/etc/dovecot/dovecot-dict-sql.conf.ext quota = mysql:/usr/local/dovecot-2.1/etc/dovecot/dovecot-dict-sql.conf.ext } disable_plaintext_auth = no dotlock_use_excl = no first_valid_gid = 89 first_valid_uid = 89 last_valid_gid = 89 last_valid_uid = 89 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes log_path = /var/log/dovecot/dovecot.log mail_fsync = always mail_location = maildir:~/Maildir mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = quota acl zlib expire maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave vnd.dovecot.duplicate mmap_disable = yes namespace { list = children location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u prefix = shared/%%n/ separator = / subscriptions = no type = shared } namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Spam { auto = subscribe special_use = \Junk } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = / } passdb { args = cache_key=%s%u webmail=192.168.113.215 driver = vpopmail } plugin { acl = vfile:/usr/local/dovecot-2.1/etc/dovecot/global-acls:cache_secs=300 acl_shared_dict = proxy::acl expire = Trash expire2 = Spam expire_dict = proxy::expire quota = maildir:UserQuota quota2 = dict:User quota::noenforcing:proxy::quota quota_rule2 = Trash:storage=+100M quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = ~/.dovecot.sieve sieve_default = /usr/local/dovecot-2.1/etc/dovecot/sieve/default.sieve sieve_dir = ~/sieve sieve_extensions = +vnd.dovecot.duplicate } protocols = imap pop3 sieve service auth { unix_listener auth-userdb { group = vchkpw mode = 0660 user = vpopmail } } service dict { unix_listener dict { group = vchkpw mode = 0660 user = vpopmail } } service imap-login { service_count = 0 } service managesieve-login { inet_listener sieve { port = 4190 } } service pop3-login { service_count = 0 } service quota-warning { executable = script /usr/local/dovecot-2.1/etc/dovecot/scripts/quota-warning.sh unix_listener quota-warning { user = vpopmail } user = vpopmail } ssl_cert = </etc/ssl/certs/wildcard.pem ssl_key = </etc/ssl/private/wildcard.key submission_host = localhost userdb { args = quota_template=quota_rule=*:backend=%q driver = vpopmail } protocol lda { log_path = /var/log/dovecot/lda.log mail_plugins = quota acl zlib expire sieve } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep tb-lsub-flags imap_idle_notify_interval = 29 mins mail_max_userip_connections = 18 mail_plugins = quota acl zlib expire imap_quota imap_acl } protocol sieve { mail_max_userip_connections = 10 } protocol pop3 { mail_max_userip_connections = 5 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } Thanks -- Alessio Cecchi is: @ ILS -> http://www.linux.it/~alessice/ on LinkedIn -> http://www.linkedin.com/in/alessice Assistenza Sistemi GNU/Linux -> http://www.cecchi.biz/ @ PLUG -> ex-Presidente, adesso senatore a vita, http://www.prato.linux.it

3 11

[Dovecot] lmtp-proxying in 2.1 slower than in 2.0.14 ?
by Jan-Frode Myklebust 05 Feb '13

05 Feb '13

We upgraded our two dovecot directors from v2.0.14 to dovecot-ee 2.1.10.3 this week, and after that mail seems to be flowing a lot slower than before. The backend mailstores are untouched, on v2.0.14 still. After the upgrade we've been hitting process_limit for lmtp a lot, and we're struggeling with large queues in the incoming mailservers that are using LMTP virtual transport towards our two directors. I seem to remember 2.1 should have a new lmtp-proxying code. Is there anything in this that maybe needs to be tuned that's different from v2.0 ? I'm a bit scheptical to just increasing the process_limit for LMTP proxying, as I doubt running many hundreds of simultaneous deliveries should work that much better against the backend storage.. ###### doveconf -n ########## # 2.1.10.3: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.32.1.el5 x86_64 Red Hat Enterprise Linux Server release 5.5 (Tikanga) default_client_limit = 4000 director_mail_servers = 192.168.42.7 192.168.42.8 192.168.42.9 192.168.42.10 192.168.42.28 192.168.42.29 director_servers = 192.168.42.15 192.168.42.17 disable_plaintext_auth = no listen = * lmtp_proxy = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave passdb { args = proxy=y nopassword=y driver = static } protocols = imap pop3 lmtp sieve service anvil { client_limit = 6247 } service auth { client_limit = 8292 unix_listener auth-userdb { user = dovecot } } service director { fifo_listener login/proxy-notify { mode = 0666 } inet_listener { port = 5515 } unix_listener director-userdb { mode = 0600 } unix_listener login/director { mode = 0666 } } service imap-login { executable = imap-login director process_limit = 4096 process_min_avail = 4 service_count = 0 vsz_limit = 256 M } service lmtp { inet_listener lmtp { address = * port = 24 } process_limit = 100 } service managesieve-login { executable = managesieve-login director inet_listener sieve { address = * port = 4190 } process_limit = 50 } service pop3-login { executable = pop3-login director process_limit = 2048 process_min_avail = 4 service_count = 0 vsz_limit = 256 M } ssl_cert = </etc/pki/tls/certs/pop.example.com.cert.ca-bundle ssl_key = </etc/pki/tls/private/pop.example.com.key protocol lmtp { auth_socket_path = director-userdb } ################ -jf

2 5

[Dovecot] dsync-local(user): Error: proxy client timed out
by Metro Domain Admin 05 Feb '13

05 Feb '13

Hello, I have an intermittent but frequent problem using dsync backup. The command outputs: dsync-local(user): Error: proxy client timed out Then dies with exit code 75. Any subsequent attempts to re-run the backup invariably fail like this: dsync-local(user): Warning: Destination mailbox INBOX has been modified, need to recreate it before we can continue syncing dsync-local(user): Error: read() from worker server failed: EOF dsync-local(user): Error: msg-copy returned invalid input: dsync-local(user): Error: remote: dsync-remote(user(a)domain.com): Error: Can't delete mailbox INBOX: INBOX can't be deleted. dsync-remote(l_user(a)domain.com): Error: command MSG-SAVE failed dsync-local(user): Warning: Mailbox changes caused a desync. You may want to run dsync again. The syntax I am using is: dsync -u $user backup \ ssh -i <idfile> <user@host> \ dsync -u l_$user We have this running in a script that loops through all users. The error happens mostly on the larger mailboxes but I've seen it succeed on the largest ones then fail on smaller. One mid-sized account now fails consistently. The backup is running from a Mac OS PPC server running 2.1.12 The target is a Linux Intel box running 2.1.13, but I had the same problem sending to a Mac OS Intel on 2.1.12. Mdbox in all cases. Thanks, Tony

2 1

[Dovecot] METADATA / ANNOTATE extensions
by list＠airstreamcomm.net 05 Feb '13

05 Feb '13

According to the roadmap http://wiki2.dovecot.org/Roadmap implementation of the METADATA / ANNOTATE extensions is fairly high on the list. I was just curious if there is a target release in mind for this functionality?

2 1

[Dovecot] Overloading IMAP Server
by Harford, Ken 04 Feb '13

04 Feb '13

Hi All, I am having an issue with dovecot IMAP reading and writing to one specific mailbox. I have a check email delivery script that sends out a email and then logs into dovecot to check if the mailbox that the message has been delivered to. However, the servers that send these messages send them in bunches depending on how many postfix spools it is checking. So I could get 60 messages all being sent to 1 mailbox and then having to read that same mailbox to check if the message actually got delivered. I am using postfix as the MTA and dovecot is actually delivering the message to the mailbox I am getting a lot of errors such as the following: Could not connect to IMAP server imap failed: IMAP RECEIVE CRITICAL - Could not select INBOX Any ideas as to what I can tweak in dovecot to allow these messages to be verified. Thanks for any information or help you could provide!! Ken

3 5

[Dovecot] cmsg cancel <keh8l6$3c9$1@de-l.enfer-du-nord.net>
by Michael Grimm 01 Feb '13

01 Feb '13

ignore Article cancelled by slrn 1.0.1

1 0

[Dovecot] Reviewing end-user ham/spam submissions before feeding them to sa-learn via Dovecot Antispam plug-in
by Ben Johnson 01 Feb '13

01 Feb '13

Currently, I'm using the Dovecot Antispam plug-in with great success. Everything works as expected. However, I would like to change the plug-in's behavior such that it simply sends a copy of a message that is moved from Inbox -> Junk (or Junk -> Inbox) to an administrator, instead of calling sa-learn (I'm using SpamAssassin) automatically. Basically, I would like to be able to review messages that end-users submit for training before they are actually fed to sa-learn. Has anyone had a similar need? If the Antispam plug-in already supports this, if the necessary commands can simply be added to the shell script that Antispam calls, or if there is a better method altogether, any help is greatly appreciated. Thank you! -Ben

2 4

[Dovecot] Dovecot Director Doveadm fails when there are a lot of output information
by Ramon Frontera 31 Jan '13

31 Jan '13

Hi, we are running dovecot 2.1.13 We have 2 proxies with director and 4 mail servers. we use LDAP when we execute doveadm-quota -A and doveadm with few output lines, its works fine. When we use doveadm-search or doveadm-mailbox with a lot of output information the command stops the execution and the command no ends. The connection to one of the 4 mailserver has finished at this moment. I have made some tests and i have found that if we use only one mailserver the commands works fine. I put the gdm bt output hope it help you. (the proxy thats executes the command) (gdb) bt full #0 0x0000003872ee86f3 in __epoll_wait_nocancel () from /lib64/libc.so.6 No symbol table info available. #1 0x0000003873a534b8 in io_loop_handler_run (ioloop=0x2364120) at ioloop-epoll.c:181 ctx = 0x236b080 events = <value optimized out> event = <value optimized out> list = <value optimized out> io = <value optimized out> tv = {tv_sec = 59, tv_usec = 389208} msecs = 59390 ret = <value optimized out> i = <value optimized out> call = <value optimized out> #2 0x0000003873a52488 in io_loop_run (ioloop=0x2364120) at ioloop.c:398 No locals. #3 0x0000003873a3de43 in master_service_run (service=0x2363fd0, callback=<value optimized out>) at master-service.c:544 No locals. #4 0x0000000000413d6e in doveadm_server_flush_one () No symbol table info available. #5 0x0000000000414741 in doveadm_mail_server_user () No symbol table info available. ---Type <return> to continue, or q <return> to quit--- #6 0x000000000040e6bc in doveadm_mail_next_user () No symbol table info available. #7 0x000000000040ed7c in doveadm_mail_cmd () No symbol table info available. #8 0x000000000040f00c in doveadm_mail_try_run () No symbol table info available. #9 0x00000000004162b1 in main () No symbol table info available. Thanks in advance! -- ------------------------------------------ Ramon Frontera Universitat de les Illes Balears

1 0

[Dovecot] Dovecot 2.2.beta1 errors
by Andreas Kasenides 31 Jan '13

31 Jan '13

From the command >doveadm log errors we get > Jan 31 15:41:12 imap(xxxx): Panic: Buffer full (8221 > 8192, pool > <none>) Jan 31 15:41:12 imap(xxxx): Error: Raw backtrace: > /usr/local/lib/dovecot/libdovecot.so.0(+0x5b83a) [0x7ffbaa3a783a] -> > /usr/local/lib/dovecot/libdovecot.so.0(+0x5b886) [0x7ffbaa3a7886] -> > /usr/local/lib/dovecot/libdovecot.so.0(i_error+0) [0x7ffbaa36adaf] -> > /usr/local/lib/dovecot/libdovecot.so.0(+0x57cfc) [0x7ffbaa3a3cfc] -> > /usr/local/lib/dovecot/libdovecot.so.0(+0x5134f) [0x7ffbaa39d34f] -> > /usr/local/lib/dovecot/libdovecot.so.0(+0x4a02d) [0x7ffbaa39602d] -> > /usr/local/lib/dovecot/libdovecot.so.0(+0x4a0ca) [0x7ffbaa3960ca] -> > /usr/local/lib/dovecot/libdovecot.so.0(i_stream_read+0x64) > [0x7ffbaa3af924] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x6844c) > [0x7ffbaa3b444c] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x685f1) > [0x7ffbaa3b45f1] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x686d0) > [0x7ffbaa3b46d0] -> > /usr/local/lib/dovecot/libdovecot.so.0(i_stream_read+0x64) > [0x7ffbaa3af924] -> > /usr/local/lib/dovecot/libdovecot.so.0(i_stream_read_data+0x52) > [0x7ffbaa3afc32] -> > /usr/local/lib/dovecot/libdovecot-storage.so.0(+0x987ba) > [0x7ffbaa69a7ba] -> > /usr/local/lib/dovecot/libdovecot-storage.so.0(index_mail_get_binary_stream+0x135) > [0x7ffbaa69ac45] -> > /usr/local/lib/dovecot/libdovecot-storage.so.0(mail_get_binary_stream+0x61) > [0x7ffbaa674481] -> > /usr/local/lib/dovecot/libdovecot-storage.so.0(imap_msgpart_open+0xb0) > [0x7ffbaa6cf980] -> dovecot/imap() [0x418619] -> dovecot/imap() > [0x4166e2] -> dovecot/imap(imap_fetch_more+0x31) [0x416911] -> > dovecot/imap(cmd_fetch+0x41f) [0x40cd9f] -> > dovecot/imap(command_exec+0x3d) [0x414e2d] -> dovecot/imap() > [0x41402e] -> dovecot/imap(client_handle_input+0x11d) [0x41431d] -> > dovecot/imap(client_input+0x6f) [0x41468f] -> > /usr/local/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x36) > [0x7ffbaa3b5fe6] -> > /usr/local/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0xa7) > [0x7ffbaa3b7027] -> > /usr/local/lib/dovecot/libdovecot.so.0(io_loop_run+0x28) > [0x7ffbaa3b5f88] Jan 31 15:41:12 imap(xxxx): Fatal: master: > service(imap): child 2236 killed with signal 6 (core dumped) where xxxx is the offending user name. The error repeats at random intervals, I guess related to the activity. Since we are using Horde 5 on the front end we get the following errors from it: > Jan 31 15:02:59 thalia HORDE: [imp] Mail server closed the connection > unexpectedly. [pid 6402 on line 390 of > "/sys-data/WebData/horde/imp/lib/Imap.php"] Jan 31 15:02:59 thalia > HORDE: [imp] Operation failed due to a lack of a secure connection. > [pid 6402 on line 390 of "/sys-data/WebData/horde/imp/lib/Imap.php"] > Jan 31 15:02:59 thalia HORDE: [imp] Operation failed due to a lack of > a secure connection. [pid 6402 on line 390 of > "/sys-data/WebData/horde/imp/lib/Imap.php"] Jan 31 15:02:59 thalia > HORDE: [imp] Operation failed due to a lack of a secure connection. > [pid 6402 on line 94 of > "/sys-data/WebData/horde/imp/lib/Imap/Exception.php"] We believe these are related to the above Dovecot error since they happens together. Is this a Dovecot problem? Config attached. Thanx -- Andreas Kasenides Senior IT Officer Dept. of Computer Science, University of Cyprus Tel: 22892714, Fax: 22892701

2 1

[Dovecot] sieve_max_redirects=0 not working as documented
by Arnaud Abélard 31 Jan '13

31 Jan '13

Hello I'm trying to keep my users from using the "redirect" action with pigeonhole from dovecot 2.0.21. As documented in http://wiki2.dovecot.org/Pigeonhole/Sieve/Configuration I configured sieve like this: plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_max_redirects = 0 } (and doveconf indeed shows the new setting for sieve_max_redirects) Unfortunately I can still use the redirect action: lda(dummy(a)univ-nantes.fr): Debug: sieve: executing script from /vmail/d/u/dummy/.dovecot.svbin lda(dummy(a)univ-nantes.fr): sieve: msgid=<510A758D.1030305(a)univ-nantes.fr>: forwarded to <xxxx(a)xxxxx.com> what could I have missed? Thanks, Arnaud -- Arnaud Abélard (jabber: arnaud.abelard(a)univ-nantes.fr) Administrateur Système - Responsable Services Web Direction des Systèmes d'Informations Université de Nantes - ne pas utiliser: trapemail(a)univ-nantes.fr

2 1

[Dovecot] Cleanups in HG f11ae64365b5 break Authentication
by Thomas Leuxner 31 Jan '13

31 Jan '13

==> /var/log/dovecot/dovecot.log <== Jan 30 19:57:51 spectre dovecot: master: Warning: SIGHUP received - reloading configuration Jan 30 19:58:48 spectre dovecot: imap-login: Login: user=<tlx(a)leuxner.net>, method=PLAIN, rip=1.2.3.4, lip=5.6.7.8, mpid=15572, TLS, session=<o4WxGYbUsQBeT5Qc> Jan 30 19:58:48 spectre dovecot: imap(tlx(a)leuxner.netuid=5000): Error: user tlx(a)leuxner.netuid=5000: Couldn't drop privileges: User is missing UID (see mail_uid setting) Jan 30 19:58:48 spectre dovecot: imap(tlx(a)leuxner.netuid=5000): Error: Internal error occurred. Refer to server log for more information.

2 2

[Dovecot] v2.1.14 released
by Timo Sirainen 30 Jan '13

30 Jan '13

http://dovecot.org/releases/2.1/dovecot-2.1.14.tar.gz http://dovecot.org/releases/2.1/dovecot-2.1.14.tar.gz.sig If you've been waiting for a fully stable release after the recent cache file troubles in v2.1.11+, this release should be the one. Hopefully there won't be v2.1.15 anytime in near future. (v2.2.rc1 does look close though.) BTW. I know there are quite a lot of mails I haven't replied to in dovecot list. Too busy for now.. + doveadm acl recalc command added - v2.1.11+ had a race condition where it sometimes overwrote data in dovecot.index.cache file. This could have caused Dovecot to return the same cached data to two different messages. - mdbox: Fixes to handling duplicate GUIDs during index rebuild

1 0

[Dovecot] decode2text.sh
by bhs692-dove＠yahoo.com 30 Jan '13

30 Jan '13

Dovecot version: 2.1.13 OS: Centos 6.3 CPU: 64bit x86 There appear to be two related errors in the decode2text.sh file (which can be used for indexing/ searching attachments). - The layout of "$formats" has repeated values for pdf, ppt, etc, so you should only match the pattern once by adding -m1 - The layout of "$formats" has the file extension in the second "column", so the "start of line"(^) match doesn't work as is. Original problem line (from ./src/plugins/fts/decode2texh.sh): fmt=`echo "$formats" | grep -w "^$content_type" | cut -d ' ' -f 2` Here are two options that appear to solve the problem. The first option is probably preferred, since it matches exactly the extension to the second "column". 1) switch the order of commands (cut & grep) and add -m1. for example: fmt=`echo "$formats" | cut -d ' ' -f 2 | grep -w -m1 "^$content_type"` -OR- 2) add "m1" and remove "^". for example: fmt=`echo "$formats" | grep -w -m1 "$content_type" | cut -d ' ' -f 2`

2 1

[Dovecot] passdb to add extra fields?
by Timo Sirainen 30 Jan '13

30 Jan '13

Some passdbs like PAM can't really return any extra fields. Also some people have wanted to combine users' data from different passdb/userdbs so that for example you'd have userdb passwd give the uid/gid/home, but then you'd also have some other userdb give quota limits. So I was thinking something like this: passdb { driver = pam } passdb { driver = sql include = yes } or: userdb { driver = passwd } userdb { driver = passwd-file include = yes } I'm not sure about two things: 1) Should there be a way to replace all of the existing fields instead of just adding new ones? 2) Any thoughts of a better name than "include"? With passdb it would mean that it's included only when the authentication failed for some other passdb. With userdb it means it's included only if a previous userdb lookup succeeded. Also there are already "deny" and "pass" settings. Interaction with them can be somewhat confusing.. Maybe all of these should be replaced with: type=deny: Same as old deny=yes (deny auth if user is in list) type=precondition(?): Same as pass=yes (require another passdb to match) type=postcondition(?): Require user to exist in this passdb/userdb as well, adding any extra fields in it. type=add: Add any extra fields, if the user exists at all. (Better ideas for the names here? Is even "type" a good name?) Then maybe a new setting to delete existing extra fields .. or perhaps just extend passdb { override_fields } so that having "-field" would delete the field if it already existed..

3 6

[Dovecot] A lot of dovecot/imap processes
by Juan Cifo Servera 30 Jan '13

30 Jan '13

Hello! I have a dovecot installed and many users could login via IMAP over SSL (40 users at same time aprox). Users could have "Check mail every X time" enabled in their client (Thunderbird or K-9 mail) - Is this required feature? I noted that if I disable it I still getting news mails without having to check for new mails manually - . I noted that dovecot is creating a lot of process (dovecot/imap and dovecot/imap-login) and is requiring more and more RAM. I think that every login starts a process but never is endend. The output of /*ps aux | grep dovecot | wc*/ is increasing until 250 lines aprox. I think that is limited by process_limit = 256. But if I put process_limit = 100, in the log appers a message that dovecot is aborting logins (and I noted that new connections sometimes couldn't login). Anyway the mailserver is working well, but I'm afraid of the consumtion of RAM. Is that normal? Details: # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-36-generic-pae i686 Ubuntu 12.04.1 LTS nfs auth_mechanisms = plain login dotlock_use_excl = no log_timestamp = "%Y-%m-%d %H:%M:%S " mail_fsync = always mail_location = maildir:/mnt/vmail/%d/%n/Maildir mail_privileged_group = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave vacation-seconds mmap_disable = yes namespace { inbox = yes location = prefix = separator = . subscriptions = yes type = private } passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } plugin { autocreate = Trash autocreate2 = Sent autocreate3 = Drafts autosubscribe = Trash autosubscribe2 = Sent autosubscribe3 = Drafts sieve = /mnt/vmail/%d/%n/Maildir/.dovecot.sieve sieve_dir = ~/sieve sieve_extensions = +vacation-seconds sieve_global_dir = /etc/dovecot/sieve_global_dir sieve_global_path = /etc/dovecot/default.sieve sieve_vacation_default_period = 2s sieve_vacation_max_period = 3s sieve_vacation_min_period = 1s } protocols = imap lmtp sieve service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { group = vmail mode = 0600 user = vmail } user = root } service imap-login { inet_listener imap { port = 0 } process_limit = 256 } service managesieve-login { inet_listener sieve { port = 4190 } process_min_avail = 1 service_count = 1 vsz_limit = 64 M } service managesieve { process_limit = 10 } service pop3-login { process_limit = 256 } ssl = required ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } userdb { args = uid=5000 gid=5000 home=/mnt/vmail/%d/%n allow_all_users=yes driver = static } protocol imap { imap_capability = IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDP LUS LIST-EXTENDED I18NLEVEL=1 ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS mail_plugins = autocreate } protocol pop3 { pop3_uidl_format = %08Xu%08Xv } protocol lda { auth_socket_path = /var/run/dovecot/auth-master log_path = /var/log/dovecot-deliver.log mail_plugins = " sieve" postmaster_address = ###(a)###.### } protocol sieve { info_log_path = /var/log/dovecot-sieve.log log_path = /var/log/dovecot-sieve-errors.log managesieve_implementation_string = dovecot managesieve_max_line_length = 65536 } protocol lmtp { info_log_path = /var/log/dovecot-lmtp.log log_path = /var/log/dovecot-lmtp-errors.log mail_plugins = " sieve" } Thank-you very much.

3 2

[Dovecot] Storage plugin documentation
by James Devine 30 Jan '13

30 Jan '13

Is there any documentation anywhere on creating a new storage plugin besides looking through the existing storage code? It's a pretty extensive task and any documentation would help. Thanks

2 1

[Dovecot] help with public namespace/mailbox
by michael＠los-pollos.co 30 Jan '13

30 Jan '13

Dear all, I am hoping someone can help me with a problem that I have been trying to fix for days. Using postfix and dovecot 2.0.19 on Ubuntu 12.04 with LDAP authentication and virtual users and domains. Basically I want to setup both shared and public mailboxes. The shared part is working fine, ie I can share folders successfully and other uses can see them. However when I try and create sub folders in the public folder they don't show up in the client. I have tried creating them in manually in the filesystem ie mkdir .folder and also via thunderbird. I have read through the dovecot wiki's several times over and still cannot see why it won't work. I have debug turned on and these are the log messages I get in syslog when I start up thunderbird: acl: No lookup right to mailbox: public/folder acl vfile: file /home/example.com/public/.folder/dovecot-acl not found acl vfile: file /home/example.com/public/dovecot-acl not found So I create the dovecot-acl file manually in public and set the right file system permissions and the errors go away, yet the folder still doesn't get created despite the following getting logged in syslog. Jan 29 23:43:57 alpha dovecot: imap(testuser(a)example.com): Debug: Namespace public/: /home/example.com/public/.folder2 doesn't exist yet, using default permissions Jan 29 23:43:57 alpha dovecot: imap(testuser(a)example.com): Debug: Namespace public/: Using permissions from /home/example.com/public: mode=0777 gid=-1 Right now I am thinking the problem might be that I am trying to setup both shared and public namespaces within the same configuration and therefore dovecot is looking for acl's for the public when it shouldn't be? Feel like I am stabbing in the dark with this though. Any help anyone can offer will be greatly appreciated! Thanks in advance. Regards, Michael. Here is my dovecot.conf # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-042stab072.10 i686 Ubuntu 12.04.1 LTS auth_debug_passwords = yes auth_socket_path = /var/run/dovecot/auth-master auth_verbose = yes disable_plaintext_auth = no lda_mailbox_autocreate = yes log_timestamp = "%Y-%m-%d %H:%M:%S " mail_debug = yes mail_gid = vmail mail_location = maildir:~/Maildir mail_plugins = quota acl mail_privileged_group = mail mail_uid = vmail namespace { inbox = yes location = prefix = separator = / type = private } namespace { hidden = no inbox = no list = yes location = maildir:/home/%%d/%%n/Maildir:INDEX=/home/%d/%n/Maildir/Shared/%%n prefix = Shared/%%n/ separator = / subscriptions = no type = shared } namespace { hidden = no list = yes location = maildir:/home/%d/public prefix = public/ separator = / subscriptions = no type = public } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } passdb { driver = pam } plugin { acl = vfile acl_anyone = allow acl_shared_dict = file:/home/%d/shared-mailboxes.db quota = maildir quota_rule = *:storage=25GB quota_rule2 = Trash:storage=+10%% quota_warning = storage=95%% /usr/local/bin/quota-warning.sh 95 } postmaster_address = postmaster(a)example.com protocols = imap pop3 quota_full_tempfail = yes sendmail_path = /usr/lib/sendmail service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { group = vmail mode = 0600 user = vmail } user = root } service imap-login { chroot = login executable = /usr/lib/dovecot/imap-login inet_listener imap { address = * port = 143 } inet_listener imaps { address = * port = 993 ssl = yes } user = dovecot } service imap { executable = /usr/lib/dovecot/imap } service pop3-login { chroot = login inet_listener pop3 { address = * port = 110 } inet_listener pop3s { address = * port = 995 ssl = yes } user = dovecot } ssl_cert = </etc/ssl/certs/alpha.example.com.crt ssl_key = </etc/ssl/private/alpha.example.com.key userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } userdb { driver = passwd } protocol imap { mail_plugins = quota imap_quota acl imap_acl } protocol pop3 { mail_plugins = quota pop3_uidl_format = %08Xu%08Xv } protocol lda { auth_socket_path = /var/run/dovecot/auth-master mail_plugins = quota postmaster_address = postmaster(a)example.com sendmail_path = /usr/lib/sendmail }

3 2

[Dovecot] Duplicate supression mechanism
by 3.listas＠adminlinux.com.br 30 Jan '13

30 Jan '13

Hello, In a Dovecot 2.0.6 server I have an account x@domain and an alias y@domain -> x@domain. When I send an email to x@domain with carbon copy to y@domain, X receives two messages on mailbox. Dovecot2 has any feature of duplicate suppression ? Thanks -- Thiago Henrique adminlinux.com.br

5 7

[Dovecot] dovecot.index is missing
by Alexandr Sabitov 30 Jan '13

30 Jan '13

Dear All, I have noticed that dovecot.index is not generated straight away if you have just a few emails in the mailbox. Instead of that dovecot.index.log is modified and accessed by clients. Only if the number of email reaches some level then it creates dovecot.index in user mailboxes. Can somebody please tell me when (in my understanding of the process) the index log file drops all data into the mail index file. What does trigger that ? Sorry I couldn't find any info on that in the wiki. Best Regards, Alexandr Sabitov

3 3

[Dovecot] doveadm migration: Warning: I/O leak
by Gedalya 29 Jan '13

29 Jan '13

This seems to be happening only when using the pop3c plugin. Any advice? root@imap01:/etc/dovecot# doveadm -D -o imapc_user=chat_logs(a)xxxxxx.com -o 'imapc_password=*******' -o pop3c_user=chat_logs(a)xxxxxx.com -o 'pop3c_password=*****' backup -u chat_logs(a)xxxxxx.com -R imapc: doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib10_quota_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib20_expire_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib20_listescape_plugin.so doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules/doveadm doveadm(root): Debug: Skipping module doveadm_acl_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_acl_plugin.so: undefined symbol: acl_user_module (this is usually intentional, so just ignore this message) doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_expire_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_quota_plugin.so doveadm(root): Debug: Skipping module doveadm_zlib_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_zlib_plugin.so: undefined symbol: i_stream_create_deflate (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_fts_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib20_doveadm_fts_plugin.so: undefined symbol: fts_list_backend (this is usually intentional, so just ignore this message) doveadm(chat_logs(a)xxxxxx.com): Debug: Added userdb setting: mail=maildir:/stor/real/domains/xxxxxx.com/ch/chat_logs/Maildir doveadm(chat_logs(a)xxxxxx.com): Debug: Added userdb setting: plugin/quota_rule=*:storage=5120M doveadm(chat_logs(a)xxxxxx.com): Debug: Effective uid=1001, gid=1001, home=/stor/real/domains/xxxxxx.com/ch/chat_logs doveadm(chat_logs(a)xxxxxx.com): Debug: Home dir not found: /stor/real/domains/xxxxxx.com/ch/chat_logs doveadm(chat_logs(a)xxxxxx.com): Debug: Namespace : type=private, prefix=POP3-MIGRATION-NS/, sep=, inbox=no, hidden=yes, list=no, subscriptions=yes location=pop3c: doveadm(chat_logs(a)xxxxxx.com): Debug: fs: root=, index=, control=, inbox=, alt= doveadm(chat_logs(a)xxxxxx.com): Debug: Namespace inbox: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/stor/real/domains/xxxxxx.com/ch/chat_logs/Maildir doveadm(chat_logs(a)xxxxxx.com): Debug: maildir++: root=/stor/real/domains/xxxxxx.com/ch/chat_logs/Maildir, index=, control=, inbox=/stor/real/domains/xxxxxx.com/ch/chat_logs/Maildir, alt= doveadm(chat_logs(a)xxxxxx.com): Debug: Namespace : /stor/real/domains/xxxxxx.com/ch/chat_logs/Maildir doesn't exist yet, using default permissions doveadm(chat_logs(a)xxxxxx.com): Debug: Namespace : Using permissions from /stor/real/domains/xxxxxx.com/ch/chat_logs/Maildir: mode=0700 gid=-1 dsync(chat_logs(a)xxxxxx.com): Debug: Effective uid=1001, gid=1001, home=/stor/real/domains/xxxxxx.com/ch/chat_logs dsync(chat_logs(a)xxxxxx.com): Debug: Namespace : type=private, prefix=POP3-MIGRATION-NS/, sep=, inbox=no, hidden=yes, list=no, subscriptions=yes location=pop3c: dsync(chat_logs(a)xxxxxx.com): Debug: fs: root=, index=, control=, inbox=, alt= dsync(chat_logs(a)xxxxxx.com): Debug: Namespace inbox: type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=imapc: dsync(chat_logs(a)xxxxxx.com): Debug: imapc: root=, index=, control=, inbox=, alt= dsync(chat_logs(a)xxxxxx.com): Debug: imapc(mail01.xxxxxx.com:143): Looking up IP address dsync(chat_logs(a)xxxxxx.com): Debug: imapc(mail01.xxxxxx.com:143): Connecting to 111.111.111.111:143 dsync(chat_logs(a)xxxxxx.com): Debug: imapc(mail01.xxxxxx.com:143): Server capabilities: IMAP4rev1 NAMESPACE LITERAL+ UIDPLUS IDLE COMPARATOR AUTH=LOGIN AUTH=NTLM AUTH=SCRAM-MD5 AUTH=CRAM-MD5 dsync(chat_logs(a)xxxxxx.com): Debug: imapc(mail01.xxxxxx.com:143): Authenticating as chat_logs(a)xxxxxx.com dsync(chat_logs(a)xxxxxx.com): Debug: imapc(mail01.xxxxxx.com:143): Authenticated successfully dsync(chat_logs(a)xxxxxx.com): Debug: Namespace : /stor/real/domains/xxxxxx.com/ch/chat_logs/Maildir/.Sent Items doesn't exist yet, using default permissions dsync(chat_logs(a)xxxxxx.com): Debug: Namespace : Using permissions from /stor/real/domains/xxxxxx.com/ch/chat_logs/Maildir: mode=0700 gid=-1 dsync(chat_logs(a)xxxxxx.com): Info: Sent Items: only in source (guid=34b8141947b9372e94589bd35a54dac5) dsync(chat_logs(a)xxxxxx.com): Info: INBOX: only in source (guid=c92f64f79f0d1ed01e6d5b314f04886c) dsync(chat_logs(a)xxxxxx.com): Debug: imapc(mail01.xxxxxx.com:143): Looking up IP address dsync(chat_logs(a)xxxxxx.com): Debug: imapc(mail01.xxxxxx.com:143): Connecting to 111.111.111.111:143 dsync(chat_logs(a)xxxxxx.com): Debug: imapc(mail01.xxxxxx.com:143): Server capabilities: IMAP4rev1 NAMESPACE LITERAL+ UIDPLUS IDLE COMPARATOR AUTH=LOGIN AUTH=NTLM AUTH=SCRAM-MD5 AUTH=CRAM-MD5 dsync(chat_logs(a)xxxxxx.com): Debug: imapc(mail01.xxxxxx.com:143): Authenticating as chat_logs(a)xxxxxx.com dsync(chat_logs(a)xxxxxx.com): Debug: imapc(mail01.xxxxxx.com:143): Authenticated successfully dsync(chat_logs(a)xxxxxx.com): Debug: pop3c(111.111.111.111): Looking up IP address dsync(chat_logs(a)xxxxxx.com): Debug: pop3c(111.111.111.111): Connecting to 111.111.111.111:110 dsync(chat_logs(a)xxxxxx.com): Debug: pop3c(111.111.111.111): Authenticating as chat_logs(a)xxxxxx.com dsync(chat_logs(a)xxxxxx.com): Warning: I/O leak: 0xb769a340 (line 1229, fd 14) dsync(chat_logs(a)xxxxxx.com): Warning: I/O leak: 0xb769a340 (line 1229, fd 10) dsync(chat_logs(a)xxxxxx.com): Warning: Timeout leak: 0xb769a5a0 (line 1316) dsync(chat_logs(a)xxxxxx.com): Warning: Timeout leak: 0xb769a5a0 (line 1316)

1 2

[Dovecot] password schemes in dovecot
by Public 28 Jan '13

28 Jan '13

Hey there, I'm using the latest dovecot 2.1.13 In the wiki http://wiki2.dovecot.org/Authentication/PasswordSchemes BLF-CRYPT is listed, but i can't use it. "doveadm pw -l" doesn't show it. And i'm unsure about how I am supposed to use the different SHA schemes, since they always output different hashes for the same password. MD5 is working fine, but I'd rather not use it. Is the wiki outdated or how do i get BLF-CRYPT working? thanks, simon

3 3

[Dovecot] From Sendmail to Dovecot mdbox, what is missing.
by Torpey List 27 Jan '13

27 Jan '13

Sendmail 8.14.4 dovecot 2.0.9 I have sendmail working and it is sending mail to /var/mail/%u. I have dovecot working in that I can move emails into IMAP folders and I can send email through IMAP. I have set up dovecot to use mdbox based on the following: mail_location = mdbox:~/mail However, I seem to be lacking a key piece of information. Sendmail is sending the mail to /var/mail/%u as a mbox (single file for all emails) format. Dovecot wants to read the mail in mdbox (Multiple messages per file, but unlike mbox multiple files per mailbox.) So the two programs are not working together. So, I cannot get dovecot to read new emails at /var/mail/%u. So I tried changing to the following: mail_location = mdbox:~/mail:INBOX=/var/mail/%u However, dovecot complains that it is NOT a directory. That is because sendmail is sending as mbox format. I have tried two lines of “mail_location” but that did not work. example mail_location = mdbox:~/mail ----> for dovecot mail_location = mbox:INBOX=/var/mail/%u -----> for sendmail I have tried LMTP and dovecot-lda. LMTP – I could not see any difference with this added or not. Dovecot-lda – I have had issues getting it configured. Thanks for any help! Sendmail changes FEATURE(`local_procmail', `/usr/libexec/dovecot/dovecot-lda',`/usr/libexec/dovecot/dovecot-lda -d $u') MODIFY_MAILER_FLAGS(`LOCAL', `-f') MAILER(procmail)dnl Here is dovecot configuration [root@nala mail]# dovecot -n # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-279.14.1.el6.x86_64 x86_64 Scientific Linux release 6.3 (Carbon) auth_mechanisms = plain login mail_gid = mail mail_location = mdbox:~/mail mail_uid = mail mbox_write_locks = fcntl passdb { driver = pam } plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_group_events = yes } service auth { unix_listener auth-userdb { mode = 0600 user = mail } } service lmtp { inet_listener lmtp { address = 192.168.1.185 127.0.0.1 ::1 port = 24 } user = mail } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } protocol lda { info_log_path = /var/log/maillog log_path = /var/log/maillog postmaster_address = postmaster(a)torpey.org }

5 11

[Dovecot] mbox INBOX out of sync (?)
by Tinguaro Barreno Delgado 26 Jan '13

26 Jan '13

Hello all, I've running a Dovecot's installation for several years without problems but since last system upgrade (Dec 26) I'm facing a kind of sync issue with the /var/mail/ inbox files. We have got mobile and desktops IMAP clients (mostly Mozilla Thunderbird). The problem is that /var/mail/ files (mbox) aren't updated: we can delete mail from clients but they persist in de /var/mail, so the same user can see the mail again from other IMAP client. Logs seems to be correct. Many thanks in advance. Best wishes, Tinguaro Barreno -- logs -- Jan 11 21:58:19 master: Info: Dovecot v2.1.7 starting up (core dumps disabled) Jan 11 21:58:33 auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Jan 11 21:58:33 auth: Debug: Module loaded: /usr/lib/dovecot/modules/auth/libdriver_mysql.so Jan 11 21:58:33 auth: Debug: Module loaded: /usr/lib/dovecot/modules/auth/libdriver_pgsql.so Jan 11 21:58:33 auth: Debug: Module loaded: /usr/lib/dovecot/modules/auth/libdriver_sqlite.so Jan 11 21:58:33 auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Jan 11 21:58:33 auth: Debug: Module loaded: /usr/lib/dovecot/modules/auth/libauthdb_ldap.so Jan 11 21:58:33 auth: Debug: auth client connected (pid=8658) Jan 11 21:58:33 auth: Debug: client in: AUTH 1 PLAIN service=imap secured session=1oL4jgnTGgDAqAwf lip=192.168.12.2 rip=192.168.12.31 lport=10103 rport=46874 resp=<hidden> Jan 11 21:58:33 auth: Debug: client out: OK 1 user=tbarreno Jan 11 21:58:33 auth: Debug: master in: REQUEST 3219783681 8658 1 38bcc0e7465cbb3aace197fa29f9319e Jan 11 21:58:33 auth: Debug: ldap(tbarreno,192.168.12.31,<1oL4jgnTGgDAqAwf>): user search: base=dc=alameda,dc=inet scope=subtree filter=(&(objectClass=usuarioLocal)(username=tbarreno)) fields=homeDirectory,uidNumber,gidNumber Jan 11 21:58:33 auth: Debug: ldap(tbarreno,192.168.12.31,<1oL4jgnTGgDAqAwf>): result: uidNumber=1004 gidNumber=1004 homeDirectory=/home/tbarreno Jan 11 21:58:33 auth: Debug: master out: USER 3219783681 tbarreno home=/home/tbarreno uid=1004 gid=1004 Jan 11 21:58:33 imap-login: Info: Login: user=<tbarreno>, method=PLAIN, rip=192.168.12.31, lip=192.168.12.2, mpid=8661, TLS Jan 11 21:58:33 imap(tbarreno): Debug: Effective uid=1004, gid=1004, home=/home/tbarreno Jan 11 21:58:33 imap(tbarreno): Debug: Namespace inbox: type=private, prefix=, sep=, inbox=no, hidden=no, list=yes, subscriptions=yes location=mbox:~/Mail:INBOX=/var/mail/tbarreno Jan 11 21:58:33 imap(tbarreno): Debug: fs: root=/home/tbarreno/Mail, index=, control=, inbox=/var/mail/tbarreno, alt= Jan 11 21:58:42 auth: Debug: auth client connected (pid=8663) Jan 11 21:58:42 auth: Debug: client in: AUTH 1 PLAIN service=imap secured session=EWyAjwnTGwDAqAwf lip=192.168.12.2 rip=192.168.12.31 lport=10103 rport=46875 resp=<hidden> Jan 11 21:58:42 auth: Debug: client out: OK 1 user=tbarreno Jan 11 21:58:42 auth: Debug: master in: REQUEST 1092354049 8663 1 13780b9ee679fecc08e3abdcd334049f Jan 11 21:58:42 auth: Debug: ldap(tbarreno,192.168.12.31,<EWyAjwnTGwDAqAwf>): user search: base=dc=alameda,dc=inet scope=subtree filter=(&(objectClass=usuarioLocal)(username=tbarreno)) fields=homeDirectory,uidNumber,gidNumber Jan 11 21:58:42 auth: Debug: ldap(tbarreno,192.168.12.31,<EWyAjwnTGwDAqAwf>): result: uidNumber=1004 gidNumber=1004 homeDirectory=/home/tbarreno Jan 11 21:58:42 auth: Debug: master out: USER 1092354049 tbarreno home=/home/tbarreno uid=1004 gid=1004 Jan 11 21:58:42 imap-login: Info: Login: user=<tbarreno>, method=PLAIN, rip=192.168.12.31, lip=192.168.12.2, mpid=8664, TLS Jan 11 21:58:42 imap(tbarreno): Debug: Effective uid=1004, gid=1004, home=/home/tbarreno Jan 11 21:58:42 imap(tbarreno): Debug: Namespace inbox: type=private, prefix=, sep=, inbox=no, hidden=no, list=yes, subscriptions=yes location=mbox:~/Mail:INBOX=/var/mail/tbarreno Jan 11 21:58:42 imap(tbarreno): Debug: fs: root=/home/tbarreno/Mail, index=, control=, inbox=/var/mail/tbarreno, alt= ---- ---- # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-3-amd64 x86_64 Debian 7.0 auth_debug = yes auth_verbose = yes debug_log_path = /tmp/dovecot.log info_log_path = /tmp/dovecot.log login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c mail_debug = yes mail_location = mbox:~/Mail:INBOX=/var/mail/%u namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = " imap" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service imap-login { inet_listener imapz { port = 10103 } } ssl_ca = </etc/local/certs/CA-Alameda_cert.pem ssl_cert = </etc/local/certs/alameda.homeip.net_cert.pem ssl_key = </etc/local/certs/alameda.homeip.net_key.pem userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } verbose_ssl = yes ---------- -- Tinguaro Barreno Delgado <tbarreno(a)alameda.homeip.net>

2 4

[Dovecot] (no subject)
by Lauryca Puyulik 26 Jan '13

26 Jan '13

http://www.das-gute-weine-haus.de/tmp/wtlss.html Lauryca Puyulik

1 0

[Dovecot] Dovecot unable to access the shadow file
by kenwood 25 Jan '13

25 Jan '13

I am installing Dovecot-2.1.13 on Slackware 13.37.0 for the first time to replace ipop3d and I have overcome all of the roadblocks as they have developed except this last one and I finally have to say “uncle”. The error messages that are showing up in the dovecot.log are as follows. Jan 24 12:27:27 tux2 dovecot: auth: Error: passwd-file /etc/shadow: open(/etc/shadow) failed: Permission denied (euid=202(dovecot) egid=202(dovecot) missing +r perm: /etc/shadow, we're not in group 43(shadow), dir owned by 0:0 mode=0755) Jan 24 12:27:27 tux2 dovecot: auth: passwd-file(user,192.168.10.2,<pw3xHwzUSQDAqAoC>): no passwd file: /etc/shadow Jan 24 12:27:29 tux2 dovecot: pop3-login: Warning: SSL alert: where=0x4008, ret=256: warning close notify [192.168.10.2] Jan 24 12:27:29 tux2 dovecot: pop3-login: Disconnected (auth failed, 1 attempts in 2 secs): user=<user>, method=PLAIN, rip=192.168.10.2, lip=192.168.10.100, TLS: Disconnected, session=<pw3xHwzUSQDAqAoC> Based on what I have read the only user that should access the shadow file is root. With that in mind I looked at all the configuration and .ext files and the only file I could find that would indicate that root should be checking the shadow file is 10-master.conf. In that file it said the default service auth-worker was root but since it was apparently not working I removed the hash mark and made it explicit. It still didn’t work. As a last resort even though it was not good practice I tried adding user dovecot to the group shadow but that did not work either. It still says dovecot is not in the group shadow even though it is. Any suggestions? -- View this message in context: http://dovecot.2317879.n4.nabble.com/Dovecot-unable-to-access-the-shadow-fi… Sent from the Dovecot mailing list archive at Nabble.com.

4 5

[Dovecot] dovecot 2.1.13, proxy and nologin extras field
by Marco Giunta 24 Jan '13

24 Jan '13

Hi at all, in our test environment, I'm playing with dovecot 2.1.13 configured as imap/pop/managesieve proxy. It is configured to authenticate users with ldap and it works very well. Now, I'd like to temporary disable some users's login, because we are moving to another storage, and I wouldn't stop imap service at all. I've found on Dovecot wiki that I could use 'nologin' extra field, but I wasn't been able to get it work. My dovecot configuration is: # 2.1.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-279.19.1.el6.x86_64 x86_64 ... auth_debug = yes auth_debug_passwords = yes auth_verbose = yes auth_verbose_passwords = plain disable_plaintext_auth = no listen = * mail_debug = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mbox_write_locks = fcntl namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap pop3 sieve service managesieve-login { inet_listener sieve { port = 4190 } inet_listener sieve_deprecated { port = 2000 } } ssl = no ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = prefetch } and my 'dovecot-ldap.conf.ext' is: uris = ldap://ldap.example.it/ dn = "cn=Reader,dc=example,dc=it" dnpass = password base = ou=People,dc=example,dc=it pass_attrs = uid=user,userPassword=password,\ =userdb_home=/var/spool/mail/%1u/%u,uidNumber=userdb_uid,gidNumber=userdb_gid,\ =proxy=y,=host=imap.example.it,\ =nologin=y pass_filter = (&(objectClass=qmailUser)(uid=%u)(accountStatus=active)) With this configuration, all users can login, and log said: Jan 23 09:16:18 localhost dovecot: master: Dovecot v2.1.13 starting up (core dumps disabled) Jan 23 09:16:33 localhost dovecot: auth: Debug: Loading modules from directory: /usr/lib64/dovecot/auth Jan 23 09:16:33 localhost dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_sqlite.so Jan 23 09:16:33 localhost dovecot: auth: Debug: Loading modules from directory: /usr/lib64/dovecot/auth Jan 23 09:16:33 localhost dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libauthdb_ldap.so Jan 23 09:16:33 localhost dovecot: auth: Debug: auth client connected (pid=3660) Jan 23 09:16:33 localhost dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=imap#011session=PsbzT/DT+gCTeiwf#011lip=192.168.129.109#011rip=192.168.44.31#011lport=143#011rport=53754 Jan 23 09:16:33 localhost dovecot: auth: Debug: client passdb out: CONT#0111#011 Jan 23 09:16:33 localhost dovecot: auth: Debug: client in: CONT#0111#011AHByb3ZhZm0AY2hlcGFsbGU= Jan 23 09:16:33 localhost dovecot: auth: Debug: ldap(prova,147.122.44.31,<PsbzT/DT+gCTeiwf>): pass search: base=ou=People,dc=example,dc=it scope=subtree filter=(&(objectClass=qmailUser)(uid=prova)(accountStatus=active)) fields=uid,userPassword,uidNumber,gidNumber,uid,uid Jan 23 09:16:33 localhost dovecot: auth: Debug: ldap(prova,192.168.44.31,<PsbzT/DT+gCTeiwf>): result: uid=prova uidNumber=2944 gidNumber=650 userPassword={MD5}BjbsTtSovVAs1csswBTI7Q== Jan 23 09:16:33 localhost dovecot: auth: Debug: client passdb out: OK#0111#011user=prova#011proxy#011host=imap.example.it#011nologin#011hostip=192.168.11.136#011pass=password Jan 23 09:16:33 localhost dovecot: imap-login: proxy(prova): started proxying to imap.example.it:143: user=<prova>, method=PLAIN, rip=192.168.44.31, lip=192.168.129.109, session=<PsbzT/DT+gCTeiwf> As you can see 'nologin' field is present in 'passdb' answer, but it doesn't seem to work. If instead I try to disable login with 'allow_nets' extra field, it works as expected: 'dovecot-ldap.conf.ext': ... pass_attrs = uid=user,userPassword=password,\ =userdb_home=/var/spool/mail/%1u/%u,uidNumber=userdb_uid,gidNumber=userdb_gid,\ =proxy=y,=host=imap.example.it,\ =allow_nets=127.0.0.0/8 dovecot log: Jan 22 18:28:19 localhost dovecot: master: Dovecot v2.1.13 starting up (core dumps disabled) Jan 22 18:28:32 localhost dovecot: auth: Debug: Loading modules from directory: /usr/lib64/dovecot/auth Jan 22 18:28:32 localhost dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_mysql.so Jan 22 18:28:32 localhost dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_pgsql.so Jan 22 18:28:32 localhost dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_sqlite.so Jan 22 18:28:32 localhost dovecot: auth: Debug: Loading modules from directory: /usr/lib64/dovecot/auth Jan 22 18:28:32 localhost dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libauthdb_ldap.so Jan 22 18:28:32 localhost dovecot: auth: Debug: auth client connected (pid=3178) Jan 22 18:28:32 localhost dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=imap#011lip=192.168.129.109#011rip=192.168.44.31# 011lport=143#011rport=53218 Jan 22 18:28:32 localhost dovecot: auth: Debug: client out: CONT#0111#011 Jan 22 18:28:32 localhost dovecot: auth: Debug: client in: CONT#0111#011AHByb3ZhZm0AY2hlcGFsbGU= Jan 22 18:28:32 localhost dovecot: auth: Debug: ldap(prova,192.168.44.31): pass search: base=ou=People,dc=example,dc=it scope=subtree filt er=(&(objectClass=qmailUser)(uid=prova)(accountStatus=active)) fields=uid,userPassword,uidNumber,gidNumber Jan 22 18:28:32 localhost dovecot: auth: Debug: auth(prova,192.168.44.31): allow_nets: Matching for network 127.0.0.0/8 Jan 22 18:28:32 localhost dovecot: auth: passdb(prova,192.168.44.31): allow_nets check failed: IP not in allowed networks Jan 22 18:28:32 localhost dovecot: auth: Debug: ldap(prova,192.168.44.31): result: uid=prova uidNumber=2944 gidNumber=650 userPassword={MD5}BjbsTtSovGGs1csswBTI7Q== Jan 22 18:28:34 localhost dovecot: auth: Debug: client out: FAIL#0111#011user=prova I don't understand what is wrong with my configuration with 'nologin'. Do someone have any clue ?? Cheers, Marco

3 4

[Dovecot] Curl
by Makarov Alex 24 Jan '13

24 Jan '13

Hello. I'm trying to configure dovecot with option --with-solr, but it cant find curl-config. What option i should specify for this reason? Curl is installed on /usr/local/lib.curl Thanks

2 1

[Dovecot] Again ACL Postgres dict trouble, no update and raw backtrace
by Steffen Kaiser 24 Jan '13

24 Jan '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, I have ACL-dict-postgres trouble again. Eventually a session does not update the ACL dictionary no longer. I execute (for testing) this script: for a in $(seq 1 ${1-4}); do echo 3-$a deleteAcl Junk dvtest1 sleep 30 echo 3-$a SetAcl Junk dvtest1 kxilrsc sleep 30 done It works two loops 2013-01-24 11:07:59 dict: Info: pgsql(localhost): Connected to database dovecot 2013-01-24 11:07:59 dict: Info: pgsql(localhost): Connected to database dovecot 2013-01-24 11:07:59 dict: Info: pgsql(localhost): Connected to database dovecot 2013-01-24 11:08:59 dict: Info: pgsql(localhost): Connected to database dovecot 2013-01-24 11:09:29 dict: Info: pgsql(localhost): Connected to database dovecot , then dies with: 2013-01-24 11:09:59 dict: Error: dict sql iterate failed: Not connected to database 2013-01-24 11:09:59 IMAP(dvtest6) [22740]: Error: acl: dict iteration failed, can't update dict 2013-01-24 11:10:02 IMAP(dvtest6) [22740]: Info: Connection closed in=159 out=572 2013-01-24 11:11:00 dict: Panic: file driver-pgsql.c: line 84 (driver_pgsql_set_state): assertion failed: (state == SQL_DB_STATE_BUSY || db->cur_result == NULL) 2013-01-24 11:11:00 dict: Error: Raw backtrace: /usr/local/dovecot-2.1.13/lib/dovecot/libdovecot.so.0(+0x4881a) [0x7f465693181a] -> /usr/local/dovecot-2.1.13/lib/dovecot/libdovecot.so.0(+0x48866) [0x7f4656931866] -> /usr/local/dovecot-2.1.13/lib/dovecot/libdovecot.so.0(i_error+0) [0x7f4656904f7f] -> dovecot2.1/dict() [0x40aa36] -> dovecot2.1/dict() [0x40aa91] -> dovecot2.1/dict() [0x40bed3] -> dovecot2.1/dict() [0x409504] -> dovecot2.1/dict(sql_db_cache_deinit+0x20) [0x408a60] -> dovecot2.1/dict(main+0x169) [0x405a59] -> /lib/libc.so.6(__libc_start_main+0xfd) [0x7f465637cc8d] -> dovecot2.1/dict() [0x404bb9] 2013-01-24 11:11:00 dict: Fatal: master: service(dict): child 22744 killed with signal 6 (core not dumped) There are two different Panic messages: Panic: file driver-pgsql.c: line 587: unreached Panic: file driver-pgsql.c: line 84 (driver_pgsql_set_state): assertion failed: (state == SQL_DB_STATE_BUSY || db->cur_result == NULL) I have ulimit -c unlimited set, at start up Dovecot says: 2013-01-23 16:33:20 master: Info: Dovecot v2.1.13 (6eabf0c738d7) starting up but I do not get no core dumps. The last SQL statement executed by Posgres is (log level debug5): 2013-01-24 11:09:59 CET DEBUG: StartTransactionCommand 2013-01-24 11:09:59 CET STATEMENT: SELECT dummy,to_user,from_user FROM user_shares 2013-01-24 11:09:59 CET DEBUG: StartTransaction 2013-01-24 11:09:59 CET STATEMENT: SELECT dummy,to_user,from_user FROM user_shares 2013-01-24 11:09:59 CET DEBUG: name: unnamed; blockState: DEFAULT; state: INPROGR, xid/subid/cid: 0/1/0, nestlvl: 1, children: 2013-01-24 11:09:59 CET STATEMENT: SELECT dummy,to_user,from_user FROM user_shares 2013-01-24 11:09:59 CET LOG: statement: SELECT dummy,to_user,from_user FROM user_shares 2013-01-24 11:09:59 CET DEBUG: CommitTransactionCommand 2013-01-24 11:09:59 CET STATEMENT: SELECT dummy,to_user,from_user FROM user_shares 2013-01-24 11:09:59 CET DEBUG: CommitTransaction 2013-01-24 11:09:59 CET STATEMENT: SELECT dummy,to_user,from_user FROM user_shares 2013-01-24 11:09:59 CET DEBUG: name: unnamed; blockState: STARTED; state: INPROGR, xid/subid/cid: 0/1/0, nestlvl: 1, children: 2013-01-24 11:09:59 CET STATEMENT: SELECT dummy,to_user,from_user FROM user_shares 2013-01-24 11:09:59 CET LOG: duration: 0.205 ms Dovecot conf: SQL /usr/local/dovecot-2.1.13/etc/dovecot/dovecot-dict-sql.conf.ext connect = host=localhost dbname=dovecot user=dovecot pass=XYZ # CREATE TABLE user_shares ( # from_user varchar(100) not null, # to_user varchar(100) not null, # dummy char(1) DEFAULT '1', -- always '1' currently # primary key (from_user, to_user) # ); # COMMENT ON TABLE user_shares IS 'User from_user shares folders to user to_user.'; # # CREATE INDEX to_user # ON user_shares (to_user); -- because we always search for to_user # # CREATE TABLE anyone_shares ( # from_user varchar(100) not null, # dummy char(1) DEFAULT '1', -- always '1' currently # primary key (from_user) # ); # COMMENT ON TABLE anyone_shares IS 'User from_user shares folders to anyone.'; map { pattern = shared/shared-boxes/user/$to/$from table = user_shares value_field = dummy fields { from_user = $from to_user = $to } } map { pattern = shared/shared-boxes/anyone/$from table = anyone_shares value_field = dummy fields { from_user = $from } } # 2.1.13 (6eabf0c738d7): /usr/local/dovecot-2.1.13/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.6 auth_cache_size = 10 M auth_debug = yes auth_mechanisms = plain login auth_verbose = yes base_dir = /var/run/dovecot2.1/ deliver_log_format = msgid=%m: %$ %p/%w "%f" "%s" dict { acl = pgsql:/usr/local/dovecot-2.1.13/etc/dovecot/dovecot-dict-sql.conf.ext quota = pgsql:/usr/local/dovecot-2.1.13/etc/dovecot/dovecot-dict-sql.conf.ext } instance_name = dovecot2.1 lda_mailbox_autocreate = yes lmtp_save_to_detail_mailbox = yes log_path = /var/log/dovecot/dovecot2.1.log log_timestamp = "%F %H:%M:%S " mail_debug = yes mail_gid = vmail mail_log_prefix = "%Us(%u) [%p]: " mail_plugins = " quota notify mail_log zlib acl" mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave imapflags namespace { list = children location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u prefix = users.%%u. separator = . type = shared } namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /usr/local/dovecot-2.1.13/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile acl_shared_dict = proxy::acl antispam_allow_append_to_spam = true antispam_backend = spool2dir antispam_spam = SPAM+ReportAsSPAM antispam_spool2dir_notspam = /tmp/spamspool/%%020lu-%%05lu-%u-H antispam_spool2dir_spam = /tmp/spamspool/%%020lu-%%05lu-%u-S antispam_trash = trash;TRASH;Trash;spam;SPAM;Spam;junk;JUNK;Junk;Deleted Items;Deleted Messages;Gel&APY-schte Elemente;Gel&APY-schte Objekte;Junk E-mail;Junk-E-Mail;INBOX.Trash;INBOX.TRASH;INBOX.trash mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size vsize from subject quota = dict:User quota::proxy::quota quota_rule = *:storage=300MB quota_rule2 = Trash:storage=+30M recipient_delimiter = + sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_extensions = +imapflags sieve_max_actions = 0 sieve_quota_max_storage = 3M } protocols = imap pop3 lmtp sieve quota_full_tempfail = yes service auth { unix_listener auth-userdb { mode = 0766 user = vmail } } service dict { unix_listener dict { group = vmail mode = 0660 user = vmail } } service doveadm { unix_listener doveadm-server { mode = 0666 } } service managesieve-login { inet_listener sieve { port = 4190 } inet_listener sieve_deprecated { port = 2000 } } ssl_ca = </etc/ssl/certs/ca.crt ssl_cert = </etc/ssl/certs/imap.pem ssl_key = </etc/ssl/private/imap.key userdb { driver = prefetch } userdb { args = /usr/local/dovecot-2.1.13/etc/dovecot/dovecot-ldap.conf.ext default_fields = home=/home/%u driver = ldap } verbose_proctitle = yes verbose_ssl = yes protocol lmtp { mail_plugins = " quota notify mail_log zlib acl quota sieve" } protocol lda { mail_plugins = " quota notify mail_log zlib acl quota sieve" } protocol imap { mail_plugins = " quota notify mail_log zlib acl imap_quota imap_zlib imap_acl antispam" } - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEVAwUBUQEQdF3r2wJMiz2NAQL62AgAsXfP01TYvGjsu9Tcny8vCHMEOhBw0QVO rvx7YDdYgyVLb/JwHQseq5XGPzRHh6PFn5HrrUFpnG87E52ZKTH1rkwYiuyM8fso HAsUM0mlz9fGGPucMa9HoTbw5turbqbjVags8x6Om4W4sgp+RITd4UZq/Qcu/ShF jfI5KDEK9bnPh9WwVKV6Yfd/1auZH+SCacb69Bb/cyVDiwbxOUTAEZikgWYgFOG2 /B1KzUPrjtumAS9myswIJxEG/4DmEt0In5fgQLM7cDdbGQl400JzR2rEa4bd3C1b 3DImA3J/YUfLpuqGS60rhx1rpSfad61Us2dh5kGgbswtbwKj2FtnTg== =Jpqg -----END PGP SIGNATURE-----

1 0

[Dovecot] Permissions when running `dovecot --exec-mail imap`
by Tim Marston 24 Jan '13

24 Jan '13

Hi, I'm running dovecot 1.2.15, on Debian squeeze. /var/mail is owned by group "mail" with permissions "g+rwxs,o=". The mail_privileged_group setting is set to "mail". I am trying to access mail on a remote machine with mutt by tunnelling mutt though ssh and running `dovecot --exec-mail imap` on the mail server. But I frequently get errors in the mail server's logs about not being able to create dotlock files when accessing my INBOX this way. This makes sense -- I'm running dovecot as a regular user, so it isn't able to write to /var/mail as group "mail". I notice that on the dovecot wiki[1] it is suggested that sudo is used to set uid/gid before running `dovecot --exec-mail imap`. But I don't actually want to set the uid, just the gid. And I also have sudo disabled at the moment. So I was wondering about another solution... Would it be acceptable to setgid the dovecot executable and change it's group to "mail" (i.e., `chgrp mail dovecot` and `chmod g+s dovecot`)? Would this pose some kind of security risk? Would this actualy do what I want, or am I missing a bigger picture? Kind regards, [1] http://wiki.dovecot.org/PreAuth -- Tim Marston ed.am

2 3

[Dovecot] warning regarding quota and mboxes
by Andreas Meyer 23 Jan '13

23 Jan '13

Hello! We drive mboxes and maildirs and the dovecot-server is running very well and everthing is fine, but I get the following warning in the dovecot-lda-errors.log when a mail is delivered to a mbox. Jan 10 16:29:24 lda(archiv(a)bitcorner.de): Warning: quota: Namespace '' is not Maildir, skipping for Maildir++ quota This is what I defined in the dovecot.conf: mail_home = /var/spool/vhosts/%d/%n mail_location = mbox:~/:maildir:~/ mail_plugins = quota plugin { quota = maildir:User quota quota_rule = *:storage=500MB quota_rule2 = Trash:storage=+10%% } Can I avoid the error above somehow? Namespaces are a bit mysterious for me at the moment. Greetings Andreas

3 3

[Dovecot] speed up dovecot IMAP server
by Bernics Gábor | Penta Unió Zrt. 23 Jan '13

23 Jan '13

Hello, I upgraded my dovecot server (1.2 -> 2.1), from debian backport because it was a little slow (wait 5-6 sec) when I opened some mail (but not every mail). Unfortunately, the mail open speed didn't increase. I think it's an index problem. Have you idea for fixing? My conf: http://pastebin.com/FNLusi51 [1] (HP Microserver with 6 Gbyte RAM - entry level server with small load and small (max. 40) concurrent connection) Best regards, Gabor Links: ------ [1] http://pastebin.com/FNLusi51

2 4

[Dovecot] dovecot nightly 20130117: dsync does returns "Name or service not known"
by Evgeny Basov 23 Jan '13

23 Jan '13

Hello. I have this settings of imapc: # doveconf -a | grep imapc imapc_features = imapc_host = imapc_list_prefix = imapc_master_user = imapc_max_idle_time = 29 mins imapc_password = imapc_port = 143 imapc_rawlog_dir = imapc_ssl = no imapc_ssl_ca_dir = imapc_ssl_verify = yes imapc_user = %u and try to sync mailbox on old server and new one: $ dsync -o imapc_user="user(a)example.org" -o imapc_password="pass" -o imapc_host=imap.example.org -o imapc_features=rfc822.size -o mailbox_list_index=no backup -R -f -u "user(a)example.org" imapc: get this error: ssh: Could not resolve hostname remote: Name or service not known dsync-local(basov(a)megagroup.ru): Error: read(remote) failed: EOF dsync-local(basov(a)megagroup.ru): Error: Remote command returned error 255 In this time new dovecot finds local user: 2013-01-17T17:21:29.837415+04:00 imap1 dovecot: auth: Debug: userdb out: USER#0111#011user@example.org#011home=/var/vmail/example.org/user/#011quota2_rule=*:storage=40M#011nodelay=Y#011uid=999#011gid=999 I don't understand what's mean under 'hostname remote'. What hostname? Is it bug or incorrect settings?

2 4

[Dovecot] Fixing bad maildir message sizes
by Richard Platel 23 Jan '13

23 Jan '13

Hello. As stated in my previous message, we have some old compressed maildir messages with incorrect sizes in the filename. These messages cause dovecot 2.x problems. I'm trying to write a script to crawl all our messages, check the actual message size and if necessary, fix the filename. However, when I do this, dovecot gives the message a new UID on next login. If I change the filename in dovecot-uidlist, dovecot still gives a new UID on next login. If I change dovecot-uidlist and delete the index, then the UID is preserved. Re-indexing our millions of mailboxes is not a great solution for us. Is there a good way to fix this?

2 2

[Dovecot] question on "doveadm user" and pass/userdb
by Gábor Lénárt 22 Jan '13

22 Jan '13

Hi, I'm about getting to know dovecot in details, I am about the command "doveadm user". The man page shows this example: userdb: jane uid : 8001 gid : 8001 home : /home/jane mail : sdbox:~/sdbox plugins : sieve quota_rule: *:storage=150M It seems to be nice, however I never got this only: ~# doveadm user lgb@office userdb: lgb@office That's all. The dovecot test configuration works otherwise via IMAP/POP3/LMTP nicely. What I guess that the lack of extra information (which would be needed by some scripts of mine, eg for getting user's home easily from shell scripts, as it's hash based, etc) is caused because I don't pass home (and/or other settings) back from userdb and/or passdb. However I do have these in global scope: mail_home = /mailstorage/%Ld/%Ln (yes, this is not hashed at all at the momement but it will be soon) mail_location = maildir:~/Maildir mail_uid = vmail mail_gid = vmail (... and also some global quota stuffs configured in plugin section) Now, I am a bit confused: even with passdb/userdb does not return with user home or GID/UID, dovecot knows these in case of pop3/imap/lmtp access, since these information can be "composed" from those settings. But then, wouldn't it possible so "doveadm user" shows those as well, like lmtp/pop3/imap can resolve those too? Honestly, it's a bit redundant to put needed information into user and pass attrs in every dbs (I have some) when dovecot knows those otherwise ... If I interpret "doveadm user"'s goal wrong (it's just for userdb/passdb query tool nothing more), is there any tool which works in this config, displaying extra information (at least user's home), or should I create some script which just repeats the functionality of dovecot's configured mail_home resolution? Thanks.

3 5

[Dovecot] namespace o shared folder, deleting index no message
by R. G. 22 Jan '13

22 Jan '13

when I set up namespace or shared folder, I need to delete the mail from the mailbox of the user who does not want to see him, but not the rest of the users. Is this possible in dovecot?.

2 1

[Dovecot] Fts Search
by Makarov Alex 22 Jan '13

22 Jan '13

Hello, i'm trying to search in mails which are in russian language. Search works fine for UTF-8 mails, but it ignores KOI8-R ones. For english in any mails it also works fine. How i can solve it? I have dovecot 1.2.17 and following config for fts: protocol imap { ..... mail_plugins = quota imap_quota autocreate fts fts_squat } plugin { ... fts = squat fts_squat = partial=4 full=10 }

1 0

[Dovecot] Mail logger question
by Hungerburg 21 Jan '13

21 Jan '13

I use Dovecot simply as a way, to provide an e-mail archive for people on the LAN, where they can move messages into from within thunderbird. Mails are stored in a maildir of one system user where all the people know the password of. This was very easy to setup in ubuntu 12. Today I started using the mail_log plugin to provide an audit trail. Now I am looking for a light way, to get the log reflect the different people or principals. One way is, to create users with the same ID in the passwd and shadow files, but I'd rather have them in a separate file, something like a list of aliases for the system user. Can you suggest a simple way, without going virtual users? Below the relevant info on dovecot: $ dovecot --version 2.0.19 $ dovecot -n # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-35-generic x86_64 Ubuntu 12.04.1 LTS mail_plugins = " fts fts_squat mail_log notify" passdb { driver = pam } plugin { fts = squat fts_squat = partial=4 full=10 mail_log_events = save delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size from subject } protocols = " imap" ssl_cert = </etc/ssl/certs/ssl-cert-snakeoil.pem ssl_key = </etc/ssl/private/ssl-cert-snakeoil.key userdb { driver = passwd } Thank you all -- peter

1 1

[Dovecot] CDB support (with patch)
by Hleb Valoshka 21 Jan '13

21 Jan '13

Hello! Is there anybody interested in CDB support for auth dicts? I've implemented simple patch for it.

2 2

Re: [Dovecot] Solr 4.0 - lucene - FTS
by Paul Freeman 20 Jan '13

20 Jan '13

On 2012-11-07 15:14, Timo Sirainen wrote: > On 7.11.2012, at 15.01, Charles Marcus wrote: > >> As one who is interested in implementing FTS sometime in the future, >> I'm curious about what is in store as far as improvements go... >> >> Specifically, any plans for implementing immediate/automatic index >> updates at delivery time? The lack of automatically updated indexes is >> one downside for its implementation... > > Nothing really prevents from adding that very easily .. trivial ? :) > I guess it > would need a new setting, which is always the most annoying part of > small changes. :) I think it would have to have a setting equivalent > to doveadm index -n parameter, which allows indexing most users, > except those who pretty much never read their emails. So with doveadm > index -n 1000 you could set that if the mailbox's \Recent count is > over 1000, don't index the mailbox. So .. hmm. I guess two settings > would be cleaner: > > plugin { > fts_autoindex = yes > fts_autoindex_max_recent = 1000 > } sounds nice, any plans on the roadmap to actually implement this yet ? :) > Or maybe there's a better name than "autoindex" for this feature. > SEARCH always autoindexes anyway. > >> Also, does the release of Solr 4.0 mean anything for the lucene >> library used by dovecot? > > No, fts-lucene and fts-solr are separate backends. But I do have some > small plans to add a few more features to fts-solr.

1 0

[Dovecot] %d in configuration file does not work
by Jens Tobiska 19 Jan '13

19 Jan '13

I am trying to set up dovecot in a postfix virtual account/domains setting. In the configuration file I would like to use %d in two places, for: mail_location = /var/mail/vhosts/%d/%n and to specify the location of the respective passwd file: passdb passwd-file { args = /etc/auth/%d/shadow } Looking at the logs, %d is empty while %n works, so dovecot is looking for something in /var/mail/vhosts//myname and /etc/auth//shadow which don't exist. Replacing %d in dovecot.conf with the actual domain name works. So, the quesiton is, why is %d empty, and from where does it take its value?

2 8

[Dovecot] anti-spam
by Spyros Tsiolis 19 Jan '13

19 Jan '13

Chaps, What's the story with anti-spam on dovecot ? Do we have something working out of the box, so to speak ? Any guidance / ideas ? s. ---- "I merely function as a channel that filters music through the chaos of noise" - Vangelis

2 1

[Dovecot] [PATCH] LMTP: Permit user IDs containing recipient_delimiter
by Ulrich Zehl 18 Jan '13

18 Jan '13

The Dovecot 2.1 LMTP server currently always strips the address extension from a recipient address (if recipient_delimiter is set), meaning user IDs cannot contain the recipient delimiter character, e.g. "user+foo" is not supported. This was surprising for me, as Postfix behaves differently in this regard: It first looks up "user+foo", and only then "user". The attached patch works for me and brings Dovecot's behavior in line with Postfix. Please let me know what you think about it.

2 2

[Dovecot] users = virual + system (both with ldap backend) => Fatal: setgid(12(mail)) failed with euid=501(...
by lejeczek 18 Jan '13

18 Jan '13

dear all probably something trivial, just cannot get my way around it, my goal is to get sieve on local-system users too, so postfix hands lda over to dovecot errors with mail for system users: lda(me): Fatal: setgid(12(mail)) failed with euid=501(me), gid=513(Domain Users), egid=513( Domain Users): Operation not permitted (This binary should probably be called with process group set to 12(mail) instead of 513(Doma in Users)) mail storage is in users' homes and these are on nfs3 which bits am I missing, please advise? regards

1 0

[Dovecot] dovecot + antispam plugin - no retraining
by Michael Moerz 17 Jan '13

17 Jan '13

Hi, dovecot -n # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.8.0-0-generic x86_64 Ubuntu Raring Ringtail (development branch) listen = 10.10.200.39 login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c mail_debug = yes mail_location = maildir:~/Maildir managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = prefix = } passdb { driver = pam } plugin { antispam_backend = pipe antispam_mail_notspam = ham(a)example.org antispam_mail_sendmail = /usr/sbin/sendmail antispam_mail_sendmail_args = -f;%u(a)example.org antispam_mail_spam = spam(a)example.org antispam_mail_tmpdir = /tmp antispam_signature = X-DSPAM-Signature antispam_signature_missing = error antispam_spam_pattern_ignorecase = SPAM;Junk antispam_trash = trash;Trash;Deleted Items; Deleted Messages mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = " imap sieve pop3" service auth { unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } } service imap-login { inet_listener imaps { port = 993 ssl = yes } } ssl_cert = </etc/ssl/certs/mail.dmz.example.org.cert.pem ssl_key = </etc/ssl/private/mail.dmz.example.org.key.pem userdb { driver = passwd } protocol imap { imap_client_workarounds = delay-newmail mail_max_userip_connections = 15 mail_plugins = " antispam" } protocol pop3 { mail_max_userip_connections = 10 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { deliver_log_format = msgid=%m: %$ mail_plugins = sieve postmaster_address = postmaster quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r } filesystem is ext4 antispam util is dspam I'm trying to utilize the imap plugin antispam for retraining spam/ham when moving mail from/to spam folders. antispam plugin is loaded and imap service itself runs correctly logfile excerp for login: Jan 16 21:04:33 mailhost dovecot: imap: Debug: Loading modules from directory: /usr/lib/dovecot/modules Jan 16 21:04:33 mailhost dovecot: imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib90_antispam_plugin.so Jan 16 21:04:33 mailhost dovecot: imap(user): Debug: Effective uid=1001, gid=1001, home=/home/user Jan 16 21:04:33 mailhost dovecot: imap(user): Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/Maildir Jan 16 21:04:33 mailhost dovecot: imap(user): Debug: maildir++: root=/home/user/Maildir, index=, control=, inbox=/home/user/Maildir, alt= Jan 16 21:04:34 mailhost dovecot: imap-login: Login: user=<user>, method=PLAIN, rip=10.10.99.205, lip=10.10.200.39, mpid=5936, TLS Jan 16 21:04:34 mailhost dovecot: imap: Debug: Loading modules from directory: /usr/lib/dovecot/modules Jan 16 21:04:34 mailhost dovecot: imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib90_antispam_plugin.so Jan 16 21:04:34 mailhost dovecot: imap(user): Debug: Effective uid=1001, gid=1001, home=/home/user Jan 16 21:04:34 mailhost dovecot: imap(user): Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/Maildir Jan 16 21:04:34 mailhost dovecot: imap(user): Debug: maildir++: root=/home/user/Maildir, index=, control=, inbox=/home/user/Maildir, alt= When I move mail into or out of imap folders named Junk or SPAM I would expect, that the antispam plugin kicks in and pipes the mail to dspam. Apparently this does not happen, nothing gets piped, though the mail is still moved to the folder. I've already tried dspam-exec as a backend as well, but that fails even ealier right after imap login with: Jan 16 19:26:15 mailhost dovecot: master: Dovecot v2.1.7 starting up (core dumps disabled) Jan 16 19:26:45 mailhost dovecot: imap-login: Login: user=<user>, method=PLAIN, rip=10.10.99.205, lip=10.10.200.39, mpid=4701, TLS Jan 16 19:26:45 mailhost dovecot: imap: Debug: Loading modules from directory: /usr/lib/dovecot/modules Jan 16 19:26:45 mailhost dovecot: imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib90_antispam_plugin.so Jan 16 19:26:45 mailhost dovecot: imap(user): Debug: Effective uid=1001, gid=1001, home=/home/user Jan 16 19:26:45 mailhost dovecot: imap(user): Fatal: master: service(imap): child 4701 returned error 3 settings were: antispam_backend = dspam-exec antispam_dspam_binary = /usr/bin/dspam antispam_dspam_args = --client;--source=error;--user;%u;--signature=%%s I've also tried with: antispam_backend = dspam-exec antispam_dspam_binary = /usr/bin/dspam antispam_dspam_args = --source=error;--user;%u those settings actually do not produce the problem after the imap login, but they still do not react to moving mail into/from spam folders. I've also tried to utilize antispam_spam = Junk or antispam_spam_pattern = SPAM instead of antispam_spam_pattern_ignorecase = SPAM;Junk but neither makes a difference. Thx in advance for any advice. kind regards, Michael Moerz

2 2

[Dovecot] possible: two private namespaces with different quota?
by Steffen Kaiser 17 Jan '13

17 Jan '13

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello, in thread "how to setup different quota for multiple namespaces" I tried to get an additional, private namespace "archive" with yet another quota. Every message, regardless if delivered to INBOX or archive, counts for both namespaces, the default one and the archive one. Furthermore the dict records the quota of the archive namespace as user "ns=archive". Because the quota_rules does not accept "*", I see no way to have two or more private quota roots. Could one improve quota_root_rule_find(struct quota_root_settings *root_set, const char *name) { struct quota_rule *rule; array_foreach_modifiable(&root_set->rules, rule) { char *p = strchr(rule->mailbox_name, '\0'); if(p && p > rule->mailbox_name + 1 && p[-1] == '*' ) { /* compare box* */ if(memcmp(rule->mailbox_name, name, p - rule->mailbox_name - 2) == 0) return rule; } else if (strcmp(rule->mailbox_name, name) == 0) return rule; } return NULL; } So one could add a relative rule for the default private namespace. Kind regards, - -- Steffen Kaiser -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEVAwUBUPgKuF3r2wJMiz2NAQJRbAf/Rb993MR/j6NeLqxqqaqkry6BU2Kw2Sti xVwU9P6hAK/tb4o647PO1015Pd5XbbUpY0itqNzHguqof8+PuT4bGeECT33Y9mKA l0+Soq0Pi9war+ZHKYoQZizNDSb+fQkyGPSi3AsuHDapSpxwc6zj9v/HjxpHkr7+ l1ln8NcFG9gKZ/dB+eIM14GNHOsVKVI/lKfR4b50CFabIX871KIyXP8GEGyl9mUC te6ROCzcNTbRpyksQEjCh/UQ8PVWz8GNKAzreLMqGfdxp9SRkhSKiJYSGL9i8Rn6 CTKBmLy0Gq5MoF+7roAMBLzJe1TC0mxCkeT6s0G/iJB5vCVnYyo9BQ== =K3ko -----END PGP SIGNATURE-----

1 0

[Dovecot] Benchmarking: Dovecot vs Courier. Courier wins as POP3 server
by Alexandr Sabitov 17 Jan '13

17 Jan '13

Hi All, I have compared Dovecot performance to Courier and it appears that as a POP3 server Dovecot is slower in 2 times but as an IMAP server it is faster in 1.5 times. The same node (16CPUs), testing time is 30 min, please see results and dovecot configs attached. Benchmark software is MStone used by Sendmail Inc so is is quite reliable. I do not see anything else to tweak in Dovecot to increase POP3 performance. Can we all have some tips to improve it please ? This is how my Dovecot set up: (LDAP user) -> Dovecot Director -> (Master user) -> Dovecot Dovecot Director: dovecot-shared-4:~# /usr/local/dovecot/bin/doveconf -n -c /usr/local/dovecot/etc/dovecot/dovecot-proxy.conf # 2.1.12: /usr/local/dovecot/etc/dovecot/dovecot-proxy.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.6 auth_debug = yes auth_mechanisms = plain login cram-md5 ntlm auth_verbose = yes base_dir = /var/run/dovecot-proxy default_internal_user = webmail director_mail_servers = 192.168.100.102 director_servers = 192.168.100.101 disable_plaintext_auth = no doveadm_password = blah doveadm_proxy_port = 9292 instance_name = dovecot-proxy listen = 192.168.100.101 log_path = /var/log/dovecot-proxy.log login_greeting = Dovecot Proxy ready. mail_location = maildir:~/ passdb { args = /usr/local/dovecot/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } service auth-worker { user = webmail } service auth { client_limit = 2400 } service director { fifo_listener login/proxy-notify { mode = 0666 } inet_listener { port = 9191 } unix_listener director-userdb { mode = 0600 } unix_listener login/director { mode = 0666 } } service doveadm { inet_listener { port = 9292 } } service imap-login { executable = imap-login director inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } service imap { service_count = 0 } service lmtp { inet_listener lmtp { port = 24 } } service pop3-login { executable = pop3-login director inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } service pop3 { service_count = 0 } ssl_cert = </usr/local/dovecot/ssl/dovecot.pem ssl_key = </usr/local/dovecot/ssl/dovecot.pem userdb { args = /usr/local/dovecot/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol imap { mail_max_userip_connections = 100 } protocol doveadm { auth_socket_path = director-userdb } Dovecot (back-end): dovecot-shared-4:~# /usr/local/dovecot/bin/doveconf -n # 2.1.12: /usr/local/dovecot/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.6 auth_debug = yes auth_master_user_separator = * auth_mechanisms = plain login auth_verbose = yes base_dir = /var/run/dovecot/ default_internal_user = webmail disable_plaintext_auth = no doveadm_password = blah listen = 192.168.100.102 log_path = /var/log/dovecot.log mail_fsync = always mail_location = maildir:~/ mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = " quota fts fts_lucene" mmap_disable = yes namespace { inbox = yes location = prefix = INBOX. separator = . } passdb { args = /usr/local/dovecot/etc/dovecot/passwd.masterusers driver = passwd-file master = yes pass = yes } passdb { driver = static } plugin { fts = lucene fts_lucene = whitespace_chars=@. quota = maildir:User quota } service director { unix_listener director-admin { mode = 00 } } service doveadm { inet_listener { port = 9292 } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } process_limit = 20 process_min_avail = 8 } service imap-postlogin { executable = script-login /usr/local/dovecot/bin/imap-postlogin.sh user = webmail } service imap { executable = imap imap-postlogin } service lmtp { inet_listener lmtp { port = 24 } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } process_limit = 20 process_min_avail = 8 } service pop3-postlogin { executable = script-login /usr/local/dovecot/bin/pop3-postlogin.sh user = webmail } service pop3 { executable = pop3 pop3-postlogin } ssl_cert = </usr/local/dovecot/ssl/dovecot.pem ssl_key = </usr/local/dovecot/ssl/dovecot.pem userdb { args = /usr/local/dovecot/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol imap { mail_plugins = " quota fts fts_lucene imap_quota" } Best Regards, Alexandr Sabitov Netregistry

4 4

[Dovecot] failure trying to autocreate an Inbox that already exists
by Kurt Snyder 17 Jan '13

17 Jan '13

I have a new installation of Dovecot 2.1.12 and cannot select the Inbox without getting this error: c select inbox c NO [SERVERBUG] Internal error occurred. Refer to server log for more information. [2013-01-16 18:22:13] Here's the server log: dovecot[15643]: imap(u1): Error: Failed to autocreate mailbox INBOX: Mailbox already exists Auto create settings are currently set to 'no' -- when they were set to create, the problem was the same. Passwords are currently plaintext for testing purposes -- Imap authentication works. It's running on OS/X 10.7.3 Our config is below. Thanks for any suggestions... # 2.1.12: /usr/local/etc/dovecot/dovecot.conf # OS: Darwin 11.3.0 x86_64 auth_debug_passwords = yes auth_username_chars = disable_plaintext_auth = no mail_location = mbox:~/mail:INBOX=/var/mail/%u mail_privileged_group = mail namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox INBOX { auto = no } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = scheme=plain /etc/passwd-imap driver = passwd-file } protocols = imap ssl = no userdb { args = username_format=%n /etc/passwd-imap driver = passwd-file }

1 0

[Dovecot] dovecot-2.2.beta1: do not removes e-mail with enabled replication
by Евгений Басов 16 Jan '13

16 Jan '13

Hello. I'm created two installations of dovecot-2.2.beta1 with identical config. Without replication each server works good. With replication enabled every changes are replicated between these ones. When I probe remove or move some email in another folder it is disappears and reappears again and again in source folder and appears in destination folder. Thus increasing number of letters like with copy. Possible reasons cause of the problem: - bug - configuration settings of dovecot - users with wich dovecot works and users rights. Which version is true? If this not a bug, what should be corrected in the configuration? Configuration: auth_debug = yes auth_mechanisms = plain login auth_verbose = yes import_environment = TZ lock_method = flock mail_debug = yes mail_location = mdbox:/var/vmail/%d/%n:INDEX=/var/vmail_indexes/%d/%n/ mail_plugins = " quota notify replication" mail_temp_dir = /var/spool/lmtp-dovecot mdbox_preallocate_space = yes mdbox_rotate_interval = 1 days mdbox_rotate_size = 50 M namespace inbox { inbox = yes location = mailbox Шаблоны { auto = create } mailbox Archive { auto = create special_use = \Archive } mailbox Archives { auto = create special_use = \Archive } mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { mail_replica = remote:vmail@mailsys.office.megagroup.ru quota = dict:Domain quota:%d:redis:host=127.0.0.1:prefix=domain/ quota2 = dict:User quota::redis:host=127.0.0.1:prefix=user/ quota2_rule = *:storage=0 quota2_rule2 = Trash:storage=+5%% quota_rule = *:storage=0 quota_rule2 = Trash:storage=+5%% } service aggregator { fifo_listener replication-notify-fifo { mode = 0600 user = vmail } unix_listener replication-notify { mode = 0600 user = vmail } } service auth-worker { user = $default_internal_user } service auth { unix_listener auth-userdb { group = $default_internal_user mode = 0666 user = $default_internal_user } } service config { unix_listener config { mode = 0600 user = vmail } } service dict { unix_listener dict { mode = 0600 user = $default_internal_user } } service doveadm { user = vmail } service imap-login { process_min_avail = 5 service_count = 1 } service imap-postlogin { executable = script-login /usr/local/bin/imaptrackLastLogin.sh user = $default_internal_user } service imap { executable = imap imap-postlogin process_limit = 1024 } service lmtp { inet_listener lmtp { address = *, :: port = 24 } process_min_avail = 5 } service pop3-login { process_min_avail = 5 service_count = 1 } service pop3-postlogin { executable = script-login /usr/local/bin/pop3trackLastLogin.sh user = $default_internal_user } service pop3 { executable = pop3 pop3-postlogin process_limit = 1024 } service replicator { process_limit = 1024 process_min_avail = 3 } ssl_cert = </etc/ssl/dovecot/server.pem ssl_key = </etc/ssl/dovecot/server.key userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } verbose_proctitle = yes protocol imap { mail_plugins = " quota notify replication imap_quota" } Filesystem permissions: # ls -l /var/ drwxr-xr-x 3 vmail vmail 24 Jan 16 16:14 vmail drwxr-xr-x 3 vmail vmail 24 Jan 16 16:14 vmail_indexes # ls -l /var/spool/ drwxrwx--- 2 dovecot dovecot 6 Jan 16 15:11 lmtp-dovecot Users: dovecot:x:97:97:added by portage for dovecot:/dev/null:/sbin/nologin uid=97(dovecot) gid=97(dovecot) groups=97(dovecot) dovenull:x:102:102:added by portage for dovecot:/dev/null:/sbin/nologin uid=102(dovenull) gid=102(dovenull) groups=102(dovenull) vmail:x:999:999:User for work with local mail storage:/home/vmail:/bin/bash uid=999(vmail) gid=999(vmail) groups=999(vmail),97(dovecot) Selects from user database are rights because isolated installations are works and not get errors.

2 1

[Dovecot] FTS what to use ?
by Erik Colson 16 Jan '13

16 Jan '13

Hi I'm currently using dovecot 2.0 with squat fts which does a nice job. However I'm thinking about upgrading to dovecot 2.1 and the wiki isn't clear about which fts can or should be used with it. Is squat support dead ? As the wiki mentions that the config syntax is obsolete, I'm not sure if squat is obsolete also ? If not, what is the new syntax ? But in the case squat is dead.. what is the recommended alternative nowadays ? I don't really need substring search, but it is a nice thing to have. PS : I will be using dovecot 2.1 with maildir thanks -- erik

3 4

[Dovecot] Dovecot subtree problem in ldap/ad search
by Marcus Jüttner 15 Jan '13

15 Jan '13

Hallo Im trying to set up an Postfix and Dovecot mailserver with ActiveDirectory interation. Postfix is doing well and even Dovecot does ... but I have one big problem! My AD Accounts ar stored in two Subfolders ou=Bischoff Benutzer LTT, dc=bischoff-ltt, dc=local ou=Bischoff Benutzer Nbg, dc=bischoff-ltt, dc=local If i use "base = ou=Bischoff Benutzer LTT, dc=bischoff-ltt, dc=local" everything is fine but users from "ou=Bischoff Benutzer Nbg" will not work. Thats ok so far. But when i use "base = dc=bischoff-ltt, dc=local" none user will be found even if i use "scope = subtree". Postfix has no problem with the base set to "dc=bischoff-ltt, dc=local". Ldapsearch has no problem too. I use Version 2.1.12 on Gentoo Linux with a 2003R2 AD Is scope=subtree broken in Dovecot? Must I set some special parameters for Windows AD? My Config: hosts = 192.168.1.98 dn = bischoff-ltt\ldapsearch dnpass = xxxxx auth_bind = yes ldap_version = 3 scope = subtree base = dc=bischoff-ltt, dc=local #base = ou=Bischoff Benutzer LTT, dc=bischoff-ltt, dc=local #base = ou=Bischoff Benutzer Nbg, dc=bischoff-ltt, dc=local user_attrs = =home=/var/dovecot/%Ln/,=mail=maildir:/var/dovecot/%Ln/ user_filter = (&(ObjectClass=person)(sAMAccountName=%u)) pass_filter = (&(ObjectClass=person)(sAMAccountName=%u)) Thanks for Help Marcus

1 0

[Dovecot] Help with virtual plugin
by Joy 15 Jan '13

15 Jan '13

Hi, Is there any way to show all messages with attachment using virtual plugin. I am successfully using the plugin but didn't find way to show the same. Thanks

2 1

[Dovecot] Define custom ldap libraries when building Dovecot
by Nikolaos Milas 15 Jan '13

15 Jan '13

Hello, I would like to compile Dovecot using custom ldap libraries, located at a particular custom system location. How should I alter the config process to specify that the include dir is "/usr/local/openldap/include" and the lib dir is "/usr/local/openldap/lib64" and not the standard ones (/usr/include/ and /usr/lib64/ respectively) on RHEL/CentOS 5 (x86_64). Note that all of the above files/folders exist on the file system at the same time. The idea is to build dovecot against current openldap v2.4.x libraries and not against the available (by the OS) ancient openldap v.2.3.x libs. Please, advise. Thanks, Nick

3 5

[Dovecot] Zlib maildir reindex bug?
by Richard Platel 14 Jan '13

14 Jan '13

Hi Running dovecot 2.1.7 (from debian repo). We have some old compressed maildir messages with the wrong S= size in the filename (our fault). If I delete index files, log in to the mailbox and try to FETCH the bad message, dovecot complains about the incorrect message size, attempts to fix the filename and disconnects the client. However, it changes the filesize to the size of the message on disk, not the message's uncompressed size. For subsequent clients, the FETCH works, but dovecot logs an error (and maybe re-indexes the mailbox?) and the message UID changes. Jan 14 18:40:56 imap01 dovecot: imap(bub(a)confidence.com): Error: Cached message size larger than expected (1612 > 1556) Jan 14 18:40:56 imap01 dovecot: imap(bub(a)confidence.com): Error: Maildir filename has wrong S value, renamed the file from /mail/mailstore01/505/236/bub(a)confidence.com/.Sent Items/cur/1168058702.93517743273399070372.fetchmail01,S=1612:2,Sab to /mail/mailstore01/505/236/bub(a)confidence.com/.Sent Items/cur/1168058702.93517743273399070372.fetchmail01,S=931:2,Sab Jan 14 18:40:56 imap01 dovecot: imap(bub(a)confidence.com): Error: Corrupted index cache file /mail/index01/505/236/bub(a)confidence.com/.Sent Items/dovecot.index.cache: Broken physical size for mail UID 1 Jan 14 18:40:56 imap01 dovecot: imap(bub(a)confidence.com): Error: read(/mail/mailstore01/505/236/bub(a)confidence.com/.Sent Items/cur/1168058702.93517743273399070372.fetchmail01,S=1612:2,Sab) failed: Input/output error (uid=1) Jan 14 18:41:25 imap01 dovecot: imap(bub(a)confidence.com): Error: Cached message size smaller than expected (931 < 1556) Jan 14 18:41:25 imap01 dovecot: imap(bub(a)confidence.com): Error: Maildir filename has wrong S value, renamed the file from /mail/mailstore01/505/236/bub(a)confidence.com/.Sent Items/cur/1168058702.93517743273399070372.fetchmail01,S=931:2,Sab to /mail/mailstore01/505/236/bub(a)confidence.com/.Sent Items/cur/1168058702.93517743273399070372.fetchmail01,S=931:2,Sab Jan 14 18:41:25 imap01 dovecot: imap(bub(a)confidence.com): Error: Corrupted index cache file /mail/index01/505/236/bub(a)confidence.com/.Sent Items/dovecot.index.cache: Broken physical size for mail UID 2 Jan 14 18:41:25 imap01 dovecot: imap(bub(a)confidence.com): Error: Cached message size smaller than expected (931 < 1556) Jan 14 18:41:25 imap01 dovecot: imap(bub(a)confidence.com): Error: Maildir filename has wrong S value, renamed the file from /mail/mailstore01/505/236/bub(a)confidence.com/.Sent Items/cur/1168058702.93517743273399070372.fetchmail01,S=931:2,Sab to /mail/mailstore01/505/236/bub(a)confidence.com/.Sent Items/cur/1168058702.93517743273399070372.fetchmail01,S=931:2,Sab Jan 14 18:41:25 imap01 dovecot: imap(bub(a)confidence.com): Error: Corrupted index cache file /mail/index01/505/236/bub(a)confidence.com/.Sent Items/dovecot.index.cache: Broken physical size for mail UID 2 Jan 14 18:41:53 imap01 dovecot: imap(bub(a)confidence.com): Error: Cached message size smaller than expected (931 < 1556) Jan 14 18:41:53 imap01 dovecot: imap(bub(a)confidence.com): Error: Maildir filename has wrong S value, renamed the file from /mail/mailstore01/505/236/bub(a)confidence.com/.Sent Items/cur/1168058702.93517743273399070372.fetchmail01,S=931:2,Sab to /mail/mailstore01/505/236/bub(a)confidence.com/.Sent Items/cur/1168058702.93517743273399070372.fetchmail01,S=931:2,Sab Jan 14 18:41:53 imap01 dovecot: imap(bub(a)confidence.com): Error: Corrupted index cache file /mail/index01/505/236/bub(a)confidence.com/.Sent Items/dovecot.index.cache: Broken physical size for mail UID 2 Jan 14 18:41:53 imap01 dovecot: imap(bub(a)confidence.com): Error: Cached message size smaller than expected (931 < 1556) Jan 14 18:41:53 imap01 dovecot: imap(bub(a)confidence.com): Error: Maildir filename has wrong S value, renamed the file from /mail/mailstore01/505/236/bub(a)confidence.com/.Sent Items/cur/1168058702.93517743273399070372.fetchmail01,S=931:2,Sab to /mail/mailstore01/505/236/bub(a)confidence.com/.Sent Items/cur/1168058702.93517743273399070372.fetchmail01,S=931:2,Sab Jan 14 18:41:53 imap01 dovecot: imap(bub(a)confidence.com): Error: Corrupted index cache file /mail/index01/505/236/bub(a)confidence.com/.Sent Items/dovecot.index.cache: Broken physical size for mail UID 2

2 1

Re: [Dovecot] deleting duplicate mail?
by Joseph Tam 14 Jan '13

14 Jan '13

On Mon, 14 Jan 2013, joakim(a)verona.se writes: > Due to a misstake I got many duplicate emails in my inbox folder. Ironic mispeling. > They are stored in maildir format, so my initial thought was do simply > md5sum the mail files and remove the duplicates. This doesnt work > because the mails has differinf uids. Any other hints? If the UIDs are just headers, why don't you simply checksum without them: sed -e '/^Whatever-header:/d' < $file | md5sum grep -Ev '^Whatever-header:' < $file | md5sum Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] sieve reject to wrong address?
by Felix Rubio Dalmau 14 Jan '13

14 Jan '13

Hi all, I have succeed in setting up postfix (to send/receive emails), dovecot to access the folders via IMAP, all using TLS and sieve under dovecot to manage filters. I have also set up a sieve rule to reject those mails whose size exceeds 2 MB... and I'm really proud of everything, because it is my first time!! However, when rejecting the mail, instead of sending a mail saying "I'm sorry blah, blah, blah" to the originary sender, it is sent to the final recipient (that is, me). Do you know how to solve it? Is it a problem from sieve or dovecot? I think is some misconfiguration of my dovecot installation, because the sieve rule is: ################ if size :over 2M { reject text: Ho sento, no accepto cap correu de mes de 2MB de tamany. Sisplau, puja els fitxers mes grans a un servidor i envia'm un link. Gracies. I'm sorry, I do not accept mail over 2 MB in size. Please upload larger files to a server and send me a link. Thanks. . ; } ################ dovecot log looks like: Jan 14 17:34:16 server dovecot: lda(felix@server): sieve: msgid=<201301141734.16203.felix@server>: rejected message from <felix@server> (reject) Jan 14 17:34:16 server postfix/cleanup[2011]: 2B59CB59: message- id=<dovecot-1358181256-51155-0@server> Jan 14 17:34:16 server postfix/pipe[2012]: 311AF4E0: to=<felix@server>, relay=dovecot, delay=1, delays=0.81/0.02/0/0.19, dsn=2.0.0, status=sent (delivered via dovecot service) Thank you! -- Felix Rubio Dalmau

2 1

[Dovecot] deleting duplicate mail?
by joakim＠verona.se 14 Jan '13

14 Jan '13

Hello, Due to a misstake I got many duplicate emails in my inbox folder. They are stored in maildir format, so my initial thought was do simply md5sum the mail files and remove the duplicates. This doesnt work because the mails has differinf uids. Any other hints? -- Joakim Verona

2 1

[Dovecot] Dovecot SASL Client support?
by Charles Marcus 14 Jan '13

14 Jan '13

Hi all, I seem to recall mention of SASL client support either being added, but can't remember for sure. The wiki says nothing about Client support (now, or in the future)... http://wiki2.dovecot.org/Sasl So - is there support for it now? If not, is it planned for anytime soon? Thanks, -- Best regards, Charles

10 19

[Dovecot] load sbub-mailbox
by mourik jan heupink 14 Jan '13

14 Jan '13

Hi, We're about to migrate to dovecot (2.1.7 on wheezy), and I have a question about mail migration. Our 'old' imap mailserver will remain available, and has the same usernames/passwords as our future dovecot mailserver. The question: Is there an easy way to make the old mailboxes available under a subfolder (for example 'oldmail') in the mailboxes on the new mailserver? A bit like mounting an old homedirectory under an 'oldfiles' directory on a new fileserver. This way our users could access/migrate whatever folders they choose themselves, and we would not have migrate all messages to dovecot using scripts like imapcopy, etc. Perhaps using the proxy functionality..? Hope I make myself clear...? Regards, Mourik Jan

2 7

[Dovecot] bug report: auth via dict
by ForestYang 14 Jan '13

14 Jan '13

hi all, I was testing dovecot server , auth via redis. first I follow http://master.wiki2.dovecot.org/AuthDatabase/Dict but auth always fail, last , I found value { "uid": 123, "gid": 123, "home": "/home/username" } was wrong, the uid and gid must as string , not number. { "uid": "123", "gid": "123", "home": "/home/username" } was worked. it's hard to find the problem :( pls notice that. -- View this message in context: http://dovecot.2317879.n4.nabble.com/bug-report-auth-via-dict-tp39685.html Sent from the Dovecot mailing list archive at Nabble.com.

2 1

[Dovecot] I can not receive any mail
by Felix Rubio Dalmau 14 Jan '13

14 Jan '13

Hi everybody I'm trying to set-up an IMAPS mail server using dovecot (version 2.1.7) with virtual email accounts for my family. I have already ran through the mysql phase of the virtual email configuration (and I'm quite confident it works well, because I can send mails from the server using postfix to gmail, e.g.). However, I am stucked configuring dovecot. I don't know why is it not running properly. The symptoms are: a) When I connect by using my mail client (kmail), I don't get any error. b) When I ask kmail to check what authentication services are supported by the server, I see that it is able to connect to te server by looking to the server log. c) However, Inbox folder does never show up :S d) When I send any mail from gmail to my server, It is always refused under the reason that there is not such user in the machine (I am sure it is), and nothing shows up in the server log. Here is my configuration, just in case somebody can give it a look to help me figure out what's going on :S Thank you very much in advance. # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.6.9-1 x86_64 Debian 6.0.6 ext4 auth_cache_size = 1 M auth_debug = yes auth_mechanisms = plain login auth_verbose = yes auth_worker_max_count = 2 base_dir = /var/run/dovecot/ listen = * log_timestamp = "%Y-%m-%d %H:%M:%S " login_greeting = Dovecot ready. mail_debug = yes mail_location = maildir:/home/vmail/%d/%n/Maildir mail_privileged_group = vmail namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = type = private } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } postmaster_address = postmaster(a)mysite.org protocols = " imap" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service imap-login { inet_listener imaps { port = 993 ssl = yes } process_min_avail = 0 service_count = 1 } service imap { process_limit = 5 } ssl = required ssl_cert = </etc/postfix/ssl/cert.pem ssl_key = </etc/postfix/ssl/cert.key userdb { args = uid=5000 gid=5000 home=/home/vmail/%d/%n allow_all_users=yes driver = static } verbose_ssl = yes protocol lda { mail_plugins = sieve } -- Felix Rubio Dalmau

2 1

[Dovecot] E-mail not being processed into Dovecot folders
by stalker 14 Jan '13

14 Jan '13

I have a new CentOS 6 server running Dovecot 2.0.9 It has current patches from CentOS. Pasted below are the version and output from dovecot -n When I run mail -s "test" username test <ctrl-D> mail is written to /var/spool/mail/username and not to /home/username/Maildir/ The user's client software, Thunderbird, logs in but since mail is not written to Maildir it thinks there is nothing (see paste below from /var/log/maillog) How do I get sendmail or what ever MTA processes mail to write to Maildir rather than /var/spool/sendmail? [root@info2 Maildir]# dovecot --version 2.0.9 [root@info2 Maildir]# dovecot -n # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-279.19.1.el6.i686 i686 CentOS release 6.3 (Final) disable_plaintext_auth = no mail_debug = yes mail_location = maildir:~/Maildir mbox_write_locks = fcntl passdb { driver = pam } protocols = pop3 ssl = no ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } protocol pop3 { pop3_uidl_format = %v.%u } Jan 10 08:11:13 info2 dovecot: pop3-login: Login: user=<username>, method=PLAIN, rip=192.168.55.50, lip=192.168.55.8, mpid=30560 Jan 10 08:11:13 info2 dovecot: pop3(username): Debug: Effective uid=503, gid=503, home=/home/username Jan 10 08:11:13 info2 dovecot: pop3(username): Debug: maildir++: root=/home/username/Maildir, index=, control=, inbox=/home/username/Maildir Jan 10 08:11:13 info2 dovecot: pop3(username): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0

2 1

[Dovecot] Anyone using dovecot obox?
by list＠airstreamcomm.net 14 Jan '13

14 Jan '13

Just looking for some input from other users of the obox (object storage) backend from dovecot.fi. - What challenges/problem were you trying to overcome/solve by using obox? - What kind of architecture did you deploy using obox? (e.g. distributed object storage for performance, or distributed for availability, geographic distribution of email services, etc.) - What complexities, single points of failure, documentation omissions can you highlight having deployed the obox storage architecture? - Did the obox backend support your email services as well as you expected or more? - How was your interaction with Doveoct.fi? Thanks in advance.

2 1

[Dovecot] Installing Dovecot on Gentoo
by Christian Rößner 14 Jan '13

14 Jan '13

Hi, I have an already working dovecot server on Ubuntu 10.04 with self-created packages version 2.1.13. This setup is working prefect. Now that I do not wish to continue using Ubuntu (to much work for Upgrading), I decided to switch to Gentoo, as I had made best experiences in the past… I have installed Dovecot on Gentoo and I copied over all my configs and certs and stuff. Also created a user vmail with identical uid/gid and also checked all permissions for the certificate stuff. Dovecot starts. I also can connect to it. But when trying to login, I get errors: ------------------------------------------------------- telnet localhost 143 Trying ::1... Connected to localhost. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN AUTH=LOGIN AUTH=CRAM-MD5 AUTH=DIGEST-MD5 AUTH=NTLM] Dovecot ready. . login croessner <hiddenpw> . NO [UNAVAILABLE] Temporary authentication failure. [mx0:2013-01-13 14:24:02] ------------------------------------------------------- In the logs it looks like this: ------------------------------------------------------- Jan 13 15:22:30 mx0 dovecot: master: Dovecot v2.1.13 starting up (core dumps disabled) Jan 13 15:23:11 mx0 dovecot: auth: Debug: Loading modules from directory: /usr/lib64/dovecot/auth Jan 13 15:23:11 mx0 dovecot: auth: Debug: passwd-file /etc/dovecot/master-users: Read 1 users in 0 secs Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_extended_operation_s Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_extended_operation Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_send_initial_request Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_new_connection 1 1 0 Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_int_open_connection Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_connect_to_host: TCP db.roessner-net.de:389 Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_new_socket: 17 Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_prepare_socket: 17 Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_connect_to_host: Trying 193.239.107.37:389 Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_pvt_connect: fd: 17 tm: -1 async: 0 Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_open_defconn: successful Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_send_server_request Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_result ld 0x35d6dd481c0 msgid 1 Jan 13 15:23:11 mx0 dovecot: auth: Error: wait4msg ld 0x35d6dd481c0 msgid 1 (infinite timeout) Jan 13 15:23:11 mx0 dovecot: auth: Error: wait4msg continue ld 0x35d6dd481c0 msgid 1 all 1 Jan 13 15:23:11 mx0 dovecot: auth: Error: ** ld 0x35d6dd481c0 Connections: Jan 13 15:23:11 mx0 dovecot: auth: Error: * host: db.roessner-net.de port: 389 (default) Jan 13 15:23:11 mx0 dovecot: auth: Error: refcnt: 2 status: Connected Jan 13 15:23:11 mx0 dovecot: auth: Error: last used: Sun Jan 13 15:23:11 2013 Jan 13 15:23:11 mx0 dovecot: auth: Error: Jan 13 15:23:11 mx0 dovecot: auth: Error: Jan 13 15:23:11 mx0 dovecot: auth: Error: ** ld 0x35d6dd481c0 Outstanding Requests: Jan 13 15:23:11 mx0 dovecot: auth: Error: * msgid 1, origid 1, status InProgress Jan 13 15:23:11 mx0 dovecot: auth: Error: outstanding referrals 0, parent count 0 Jan 13 15:23:11 mx0 dovecot: auth: Error: ld 0x35d6dd481c0 request count 1 (abandoned 0) Jan 13 15:23:11 mx0 dovecot: auth: Error: ** ld 0x35d6dd481c0 Response Queue: Jan 13 15:23:11 mx0 dovecot: auth: Error: Empty Jan 13 15:23:11 mx0 dovecot: auth: Error: ld 0x35d6dd481c0 response count 0 Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_chkResponseList ld 0x35d6dd481c0 msgid 1 all 1 Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_chkResponseList returns ld 0x35d6dd481c0 NULL Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_int_select Jan 13 15:23:11 mx0 dovecot: auth: Error: read1msg: ld 0x35d6dd481c0 msgid 1 all 1 Jan 13 15:23:11 mx0 dovecot: auth: Error: read1msg: ld 0x35d6dd481c0 msgid 1 message type extended-result Jan 13 15:23:11 mx0 dovecot: auth: Error: read1msg: ld 0x35d6dd481c0 0 new referrals Jan 13 15:23:11 mx0 dovecot: auth: Error: read1msg: mark request completed, ld 0x35d6dd481c0 msgid 1 Jan 13 15:23:11 mx0 dovecot: auth: Error: request done: ld 0x35d6dd481c0 msgid 1 Jan 13 15:23:11 mx0 dovecot: auth: Error: res_errno: 0, res_error: <>, res_matched: <> Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_free_request (origid 1, msgid 1) Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_parse_extended_result Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_parse_result Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_msgfree Jan 13 15:23:11 mx0 dovecot: auth: Error: TLS: could not use key file `/etc/ssl/private/mx0.roessner-net.de.key.pem'. Jan 13 15:23:11 mx0 dovecot: auth: Error: TLS: error:0200100D:system library:fopen:Permission denied bss_file.c:398 Jan 13 15:23:11 mx0 dovecot: auth: Error: TLS: error:20074002:BIO routines:FILE_CTRL:system lib bss_file.c:400 Jan 13 15:23:11 mx0 dovecot: auth: Error: TLS: error:140B0002:SSL routines:SSL_CTX_use_PrivateKey_file:system lib ssl_rsa.c:648 Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_err2string Jan 13 15:23:11 mx0 dovecot: auth: Error: LDAP: ldap_start_tls_s() failed: Connect error Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_extended_operation_s Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_extended_operation Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_send_initial_request Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_send_server_request Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_result ld 0x35d6dd481c0 msgid 2 Jan 13 15:23:11 mx0 dovecot: auth: Error: wait4msg ld 0x35d6dd481c0 msgid 2 (infinite timeout) Jan 13 15:23:11 mx0 dovecot: auth: Error: wait4msg continue ld 0x35d6dd481c0 msgid 2 all 1 Jan 13 15:23:11 mx0 dovecot: auth: Error: ** ld 0x35d6dd481c0 Connections: Jan 13 15:23:11 mx0 dovecot: auth: Error: * host: db.roessner-net.de port: 389 (default) Jan 13 15:23:11 mx0 dovecot: auth: Error: refcnt: 2 status: Connected Jan 13 15:23:11 mx0 dovecot: auth: Error: last used: Sun Jan 13 15:23:11 2013 Jan 13 15:23:11 mx0 dovecot: auth: Error: Jan 13 15:23:11 mx0 dovecot: auth: Error: Jan 13 15:23:11 mx0 dovecot: auth: Error: ** ld 0x35d6dd481c0 Outstanding Requests: Jan 13 15:23:11 mx0 dovecot: auth: Error: * msgid 2, origid 2, status InProgress Jan 13 15:23:11 mx0 dovecot: auth: Error: outstanding referrals 0, parent count 0 Jan 13 15:23:11 mx0 dovecot: auth: Error: ld 0x35d6dd481c0 request count 1 (abandoned 0) Jan 13 15:23:11 mx0 dovecot: auth: Error: ** ld 0x35d6dd481c0 Response Queue: Jan 13 15:23:11 mx0 dovecot: auth: Error: Empty Jan 13 15:23:11 mx0 dovecot: auth: Error: ld 0x35d6dd481c0 response count 0 Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_chkResponseList ld 0x35d6dd481c0 msgid 2 all 1 Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_chkResponseList returns ld 0x35d6dd481c0 NULL Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_int_select Jan 13 15:23:11 mx0 dovecot: auth: Error: read1msg: ld 0x35d6dd481c0 msgid 2 all 1 Jan 13 15:23:11 mx0 dovecot: auth: Error: ldap_err2string Jan 13 15:23:11 mx0 dovecot: auth: Error: LDAP: ldap_start_tls_s() failed: Can't contact LDAP server Jan 13 15:23:11 mx0 dovecot: auth: Debug: auth client connected (pid=24045) Jan 13 15:24:00 mx0 dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=imap#011secured#011session=YAanRyzTOAAAAAAAAAAAAAAAAAAAAAAB#011lip=::1#011rip=::1#011lport=143#011rport=59960#011resp=<hidden> Jan 13 15:24:00 mx0 dovecot: auth: Error: ldap_extended_operation_s Jan 13 15:24:00 mx0 dovecot: auth: Error: ldap_extended_operation Jan 13 15:24:00 mx0 dovecot: auth: Error: ldap_send_initial_request Jan 13 15:24:00 mx0 dovecot: auth: Error: ldap_send_server_request Jan 13 15:24:00 mx0 dovecot: auth: Error: ldap_err2string Jan 13 15:24:00 mx0 dovecot: auth: Error: LDAP: ldap_start_tls_s() failed: Can't contact LDAP server Jan 13 15:24:02 mx0 dovecot: auth: Debug: client passdb out: FAIL#0111#011user=croessner#011temp Jan 13 15:26:11 mx0 dovecot: imap-login: Disconnected: Inactivity (auth failed, 1 attempts in 131 secs): user=<croessner>, method=PLAIN, rip=::1, lip=::1, secured, session=<YAanRyzTOAAAAAAAAAAAAAAAAAAAAAAB> Jan 13 15:27:11 mx0 dovecot: auth: Error: ldap_unbind Jan 13 15:27:11 mx0 dovecot: auth: Error: ldap_free_request (origid 2, msgid 2) Jan 13 15:27:11 mx0 dovecot: auth: Error: ldap_free_connection 1 1 Jan 13 15:27:11 mx0 dovecot: auth: Error: ldap_free_connection: actually freed ------------------------------------------------------- I checked if Dovecot would even try to access the key: ------------------------------------------------------- inotifywait -m -r --format '%:e %f' /etc/ssl Setting up watches. Beware: since -r was given, this may take a while! Watches established. OPEN mail.roessner-net.de.pem ACCESS mail.roessner-net.de.pem CLOSE_NOWRITE:CLOSE mail.roessner-net.de.pem OPEN mail.roessner-net.de.key.pem ACCESS mail.roessner-net.de.key.pem CLOSE_NOWRITE:CLOSE mail.roessner-net.de.key.pem OPEN SSL123_CA_Bundle.pem ACCESS SSL123_CA_Bundle.pem CLOSE_NOWRITE:CLOSE SSL123_CA_Bundle.pem OPEN mail.roessner-net.de.pem ACCESS mail.roessner-net.de.pem ACCESS mail.roessner-net.de.pem ACCESS mail.roessner-net.de.pem ACCESS mail.roessner-net.de.pem ACCESS mail.roessner-net.de.pem CLOSE_NOWRITE:CLOSE mail.roessner-net.de.pem OPEN mail.roessner-net.de.key.pem ACCESS mail.roessner-net.de.key.pem ACCESS mail.roessner-net.de.key.pem CLOSE_NOWRITE:CLOSE mail.roessner-net.de.key.pem OPEN SSL123_CA_Bundle.pem ACCESS SSL123_CA_Bundle.pem ACCESS SSL123_CA_Bundle.pem ACCESS SSL123_CA_Bundle.pem ACCESS SSL123_CA_Bundle.pem CLOSE_NOWRITE:CLOSE SSL123_CA_Bundle.pem OPEN ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt ACCESS ca-certificates.crt CLOSE_NOWRITE:CLOSE ca-certificates.crt OPEN mx0.roessner-net.de.pem ACCESS mx0.roessner-net.de.pem CLOSE_NOWRITE:CLOSE mx0.roessner-net.de.pem OPEN openssl.cnf ACCESS openssl.cnf ACCESS openssl.cnf ACCESS openssl.cnf CLOSE_NOWRITE:CLOSE openssl.cnf OPEN openssl.cnf ACCESS openssl.cnf ACCESS openssl.cnf ACCESS openssl.cnf CLOSE_NOWRITE:CLOSE openssl.cnf ------------------------------------------------------- I can not find any line talking about mx0.roessner-net.de.key.pem. The file exists and has proper permissions: ------------------------------------------------------- l /etc/ssl/private/ total 16 drwxr-s---+ 2 root ssl-cert 4096 Jan 12 19:29 ./ drwxr-xr-x 8 root root 4096 Jan 13 15:26 ../ -rw-r--r-- 1 root root 0 Dec 10 18:14 .keep_dev-libs_openssl-0 -r--r----- 1 root ssl-cert 1679 Jan 12 17:23 mail.roessner-net.de.key.pem -r--r-----+ 1 root ssl-cert 887 Jan 12 17:14 mx0.roessner-net.de.key.pem getfacl /etc/ssl/private/ /etc/ssl/private/mx0.roessner-net.de.key.pem getfacl: Removing leading '/' from absolute path names # file: etc/ssl/private/ # owner: root # group: ssl-cert # flags: -s- user::rwx user:amavis:r-x group::--- mask::r-x other::--- # file: etc/ssl/private/mx0.roessner-net.de.key.pem # owner: root # group: ssl-cert user::r-- user:amavis:r-x #effective:r-- group::r-- mask::r-- other::--- ------------------------------------------------------- Here is my doveconf -n: ------------------------------------------------------- # 2.1.13: /etc/dovecot/dovecot.conf # OS: Linux 3.7.0-hardened x86_64 Gentoo Base System release 2.1 auth_debug = yes auth_master_user_separator = * auth_mechanisms = plain login cram-md5 digest-md5 ntlm auth_verbose = yes hostname = mail.roessner-net.de lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes mail_access_groups = vmail mail_attachment_dir = /var/mail/virtual/copymail/attachments mail_debug = yes mail_gid = vmail mail_location = mdbox:~/mdbox mail_plugins = autocreate quota acl fts fts_solr zlib mail_privileged_group = mail mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mdbox_rotate_size = 128 M namespace { list = children location = mdbox:%%h/mdbox prefix = shared/%%u/ separator = / subscriptions = no type = shared } namespace inbox { inbox = yes location = mailbox "Deleted Messages" { special_use = \Trash } mailbox Drafts { special_use = \Drafts } mailbox Junk-E-Mail { special_use = \Junk } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } mailbox junkmail { special_use = \Junk } prefix = separator = / type = private } passdb { args = /etc/dovecot/master-users driver = passwd-file master = yes pass = yes } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile acl_shared_dict = file:/var/mail/virtual/shared-mailboxes.db autocreate = Trash autocreate2 = Sent autocreate3 = Drafts autocreate4 = junkmail autosubscribe = Trash autosubscribe2 = Sent autosubscribe3 = Drafts autosubscribe4 = junkmail fts = solr fts_solr = break-imap-search url=http://localhost:8080/solr/ quota = dict:User quota::file:%h/mdbox/dovecot-quota quota_rule = *:storage=300M:messages=20000 quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u sieve = ~/.dovecot.sieve sieve_dir = ~/sieve zlib_save = gz zlib_save_level = 6 } protocols = imap pop3 lmtp sieve service auth-worker { extra_groups = ssl-cert unix_listener auth-worker { mode = 0600 user = vmail } user = vmail } service auth { extra_groups = ssl-cert unix_listener auth-userdb { mode = 0600 user = vmail } user = vmail } service dict { unix_listener dict { mode = 0600 user = vmail } } service lmtp { unix_listener /var/spool/postfix/private/lmtp-dovecot { group = postfix mode = 0666 user = postfix } } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = vmail } user = dovecot } ssl_ca = </etc/ssl/certs/SSL123_CA_Bundle.pem ssl_cert = </etc/ssl/certs/mail.roessner-net.de.pem ssl_key = </etc/ssl/private/mail.roessner-net.de.key.pem userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } verbose_proctitle = yes verbose_ssl = yes protocol lmtp { mail_plugins = autocreate quota acl fts fts_solr zlib sieve } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep tb-lsub-flags mail_max_userip_connections = 50 mail_plugins = autocreate quota acl fts fts_solr zlib imap_quota imap_acl imap_zlib } ------------------------------------------------------- LDAP looks like this: ------------------------------------------------------- uris = ldap://db.roessner-net.de/ ldap://roessner1.roessner-net.de/ sasl_bind = yes sasl_mech = EXTERNAL tls = yes tls_ca_cert_file = /etc/ssl/certs/ca-certificates.crt tls_cert_file = /etc/ssl/certs/mx0.roessner-net.de.pem tls_key_file = /etc/ssl/private/mx0.roessner-net.de.key.pem tls_require_cert = hard debug_level = 7 base = ou=people,ou=it,dc=roessner-net,dc=de user_attrs = rnsMSQuota=quota_rule=*:storage=%$,rnsMSMailboxHome=home user_filter = (&(objectClass=rnsMSDovecotAccount)(|(rnsMSRecipientAddress=%u)(uniqueIdentifier=%u))) pass_attrs = rnsMSDeliverToAddress=user,userPassword=password pass_filter = (&(objectClass=rnsMSDovecotAccount)(|(rnsMSRecipientAddress=%u)(uniqueIdentifier=%u))(rnsMSEnableDovecot=TRUE)) iterate_attrs = rnsMSDovecotUser=user iterate_filter = (objectClass=rnsMSDovecotAccount) default_pass_scheme = PLAIN ------------------------------------------------------- Some portage information ------------------------------------------------------- [ebuild R ] net-nds/openldap-2.4.30 USE="berkdb crypt ipv6 minimal sasl ssl syslog tcpd -cxx -debug -experimental -gnutls -icu -iodbc -kerberos -odbc -overlays -perl -samba (-selinux) -slp -smbkrb5passwd" 0 kB [ebuild R ] dev-libs/cyrus-sasl-2.1.25-r3:2 USE="berkdb gdbm ldapdb openldap pam ssl urandom -authdaemond -java -kerberos -mysql -postgres -sample -sqlite -srp -static-libs" 0 kB [ebuild R ~] net-mail/dovecot-2.1.13::croessner USE="bzip2 caps imapc ipv6 ldap maildir managesieve mbox mdbox pam pop3c sdbox sieve solr sqlite ssl suid zlib -cydir -doc -kerberos -lucene -mysql -postgres (-selinux) -static-libs -vpopmail" 0 kB ------------------------------------------------------- As you can see, I have spent some time on this without luck and currently I have no idea, what the problem is. Any ideas on that? Thanks in advance -Christian Rößner -- [*] sys4 AG http://sys4.de, +49 (89) 30 90 46 64 Franziskanerstraße 15, 81669 München Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263 Vorstand: Patrick Ben Koetter, Axel von der Ohe, Marc Schiffbauer Aufsichtsratsvorsitzender: Joerg Heidrich

4 6

[Dovecot] configuration still not working
by Averlon 12 Jan '13

12 Jan '13

Hi, I would very much appreciate some help since I get one step ahead and two backwardswith my installation. I am using usernames not (not) in the form of user(a)domain.tld. Simply a string. The error I get. +++ Jan 12 08:36:31 f42252se dovecot: pop3(avadmin(a)av.loc): Error: user avadmin(a)av.loc: Initialization failed: Initializing mail s?lo c ?torage from mail_location setting failed: Ambiguous mail location setting, don't know what to do with it: /home/vmail/avadmin/? Ja?Maildir/ (try prefixing it with mbox: or maildir:) ?id )=?Jan 12 08:36:31 f42252se dovecot: pop3(avadmin(a)av.loc): Error: Invalid user settings. Refer to server log for more information? Ja?. +++ I guess it must have to do something with permissions. Butwhere and which. My config: +++ # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-35-generic x86_64 Ubuntu 12.04.1 LTS auth_debug = yes auth_mechanisms = plain login cram-md5 auth_username_format = %Lu hostname = mail.av.loc mail_gid = vmail mail_location = maildir:~/Maildir mail_privileged_group = vmail mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocols = imap pop3 service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0600 user = postfix } unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM ssl_key = </etc/ssl/private/dovecot.pem syslog_facility = avdove userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol lda { sendmail_path = /usr/sbin/sendmail } +++ Please give me ahint! -- Signatur Averlon info Mit freundlichen Grüßen / Kind Regards Karl-Heinz Fischbach

2 2

[Dovecot] dovecot and cacti (snmp ?)
by mancyborg＠gmail.com 10 Jan '13

10 Jan '13

Hi All, I've put online a postfix+dovecot+mysql+roundcube server that will grow till serving around 1500 accounts. I've installed the usual cacti graphs, plus the beautiful percona suite for mysql's cacti plus some graphs for iops and iostat. I was lurking around for the best solution to graph dovecot usage, the most detailed possible, in order to prevent and foresee problems. I'm finding sparse results, I'm not sure which one is the most current / complete. Do you have any suggestions ? Thank you very much for supporting, regards and have a nice day, Mike

2 1

[Dovecot] unknown users
by Averlon 10 Jan '13

10 Jan '13

Hi, can anyone tell me where these "unknown users" come from. As far as I see the fact, dovecot is asked by postfix to look for the password of the recipient-user (why ever). +++ Jan 7 19:43:09 f42252se postfix/smtpd[14625]: initializing the server-side TLS engine Jan 7 19:43:09 f42252se postfix/tlsmgr[14627]: open smtpd TLS cache btree:/var/lib/postfix/smtpd_scache Jan 7 19:43:09 f42252se postfix/tlsmgr[14627]: tlsmgr_cache_run_event: start TLS smtpd session cache cleanup Jan 7 19:43:09 f42252se postfix/smtpd[14625]: connect from f42252ud.averlon.loc[192.168.110.165] Jan 7 19:43:09 f42252se postfix/smtpd[14625]: setting up TLS connection from f42252ud.averlon.loc[192.168.110.165] Jan 7 19:43:09 f42252se postfix/smtpd[14625]: f42252ud.averlon.loc[192.168.110.165]: TLS cipher list "aNULL:-aNULL:ALL:+RC4:@STRENGTH" Jan 7 19:43:09 f42252se postfix/smtpd[14625]: SSL_accept:before/accept initialization Jan 7 19:43:09 f42252se postfix/smtpd[14625]: SSL_accept:SSLv3 read client hello A Jan 7 19:43:09 f42252se postfix/smtpd[14625]: SSL_accept:SSLv3 write server hello A Jan 7 19:43:09 f42252se postfix/smtpd[14625]: SSL_accept:SSLv3 write certificate A Jan 7 19:43:09 f42252se postfix/smtpd[14625]: SSL_accept:SSLv3 write key exchange A Jan 7 19:43:09 f42252se postfix/smtpd[14625]: SSL_accept:SSLv3 write server done A Jan 7 19:43:09 f42252se postfix/smtpd[14625]: SSL_accept:SSLv3 flush data Jan 7 19:43:09 f42252se postfix/smtpd[14625]: SSL_accept:SSLv3 read client key exchange A Jan 7 19:43:09 f42252se postfix/smtpd[14625]: SSL_accept:SSLv3 read finished A Jan 7 19:43:09 f42252se postfix/smtpd[14625]: SSL_accept:SSLv3 write session ticket A Jan 7 19:43:09 f42252se postfix/smtpd[14625]: SSL_accept:SSLv3 write change cipher spec A Jan 7 19:43:09 f42252se postfix/smtpd[14625]: SSL_accept:SSLv3 write finished A Jan 7 19:43:09 f42252se postfix/smtpd[14625]: SSL_accept:SSLv3 flush data Jan 7 19:43:09 f42252se postfix/smtpd[14625]: Anonymous TLS connection established from f42252ud.averlon.loc[192.168.110.165]: TLSv1 with cipher ECDHE-RSA-AES256-SHA (256/256 bits) Jan 7 19:43:09 f42252se dovecot: auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Jan 7 19:43:09 f42252se dovecot: auth: Debug: Module loaded: /usr/lib/dovecot/modules/auth/libauthdb_ldap.so Jan 7 19:43:09 f42252se dovecot: auth: Debug: auth client connected (pid=14625) Jan 7 19:43:09 f42252se dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=smtp#011nologin#011lip=192.168.110.150#011rip=192.168.110.165#011secured#011resp=<hidden> Jan 7 19:43:09 f42252se dovecot: auth: Debug: ldap(avadmin,192.168.110.165): pass search: base=ou=user,dc=averlon,dc=loc scope=onelevel filter=(&(objectClass=posixAccount)(uid=avadmin)) fields=uid,userPassword Jan 7 19:43:09 f42252se dovecot: auth: Debug: ldap(avadmin,192.168.110.165): result: uid(user)=avadmin userPassword(password)=<hidden> Jan 7 19:43:09 f42252se dovecot: auth: Debug: client out: OK#0111#011user=avadmin Jan 7 19:43:09 f42252se postfix/smtpd[14625]: 9A86C30007C: client=f42252ud.averlon.loc[192.168.110.165], sasl_method=PLAIN, sasl_username=avadmin Jan 7 19:43:09 f42252se postfix/cleanup[14631]: 9A86C30007C: message-id=<50EB173B.5090109(a)av.loc> Jan 7 19:43:09 f42252se postfix/qmgr[14561]: 9A86C30007C: from=<avadmin(a)av.loc>, size=1227, nrcpt=1 (queue active) Jan 7 19:43:09 f42252se postfix/smtpd[14625]: disconnect from f42252ud.averlon.loc[192.168.110.165] Jan 7 19:43:11 f42252se postfix/pickup[14560]: BE0AC30007F: uid=5002 from=<avadmin(a)av.loc> Jan 7 19:43:11 f42252se postfix/cleanup[14631]: BE0AC30007F: message-id=<50EB173B.5090109(a)av.loc> Jan 7 19:43:11 f42252se postfix/qmgr[14561]: BE0AC30007F: from=<avadmin(a)av.loc>, size=1534, nrcpt=1 (queue active) Jan 7 19:43:11 f42252se postfix/pipe[14632]: 9A86C30007C: to=<redmine(a)averlon.loc>, relay=spamassassin, delay=2.2, delays=0.05/0/0/2.1, dsn=2.0.0, status=sent (delivered via spamassassin service) Jan 7 19:43:11 f42252se postfix/qmgr[14561]: 9A86C30007C: removed Jan 7 19:43:11 f42252se dovecot: auth: Debug: master in: USER#0111#011redmine(a)averlon.loc#011service=lda Jan 7 19:43:11 f42252se dovecot: auth: Debug: ldap(redmine(a)averlon.loc): pass search: base=ou=user,dc=averlon,dc=loc scope=onelevel filter=(&(objectClass=posixAccount)(uid=redmine(a)averlon.loc)) fields=uid,userPassword Jan 7 19:43:11 f42252se dovecot: auth: ldap(redmine(a)averlon.loc): *unknown user* Jan 7 19:43:11 f42252se dovecot: auth: Debug: master out: NOTFOUND#0111 Jan 7 19:43:11 f42252se postfix/pipe[14637]: BE0AC30007F: to=<redmine(a)averlon.loc>, relay=dovecot, delay=0.02, delays=0/0/0/0.01, dsn=5.1.1, status=bounced (user unknown) Jan 7 19:43:11 f42252se postfix/cleanup[14631]: C279030007E: message-id=<20130107184311.C279030007E(a)mail.av.loc> Jan 7 19:43:11 f42252se postfix/qmgr[14561]: C279030007E: from=<>, size=3182, nrcpt=1 (queue active) Jan 7 19:43:11 f42252se postfix/bounce[14639]: BE0AC30007F: sender non-delivery notification: C279030007E Jan 7 19:43:11 f42252se postfix/qmgr[14561]: BE0AC30007F: removed Jan 7 19:43:11 f42252se dovecot: auth: Debug: master in: USER#0111#011avadmin(a)av.loc#011service=lda Jan 7 19:43:11 f42252se dovecot: auth: Debug: ldap(avadmin(a)av.loc): pass search: base=ou=user,dc=averlon,dc=loc scope=onelevel filter=(&(objectClass=posixAccount)(uid=avadmin(a)av.loc)) fields=uid,userPassword Jan 7 19:43:11 f42252se dovecot: auth: ldap(avadmin(a)av.loc): *unknown user* Jan 7 19:43:11 f42252se dovecot: auth: Debug: master out: NOTFOUND#0111 Jan 7 19:43:11 f42252se postfix/pipe[14637]: C279030007E: to=<avadmin(a)av.loc>, relay=dovecot, delay=0.01, delays=0/0/0/0.01, dsn=5.1.1, status=bounced (user unknown) Jan 7 19:43:11 f42252se postfix/qmgr[14561]: C279030007E: removed Jan 7 19:43:21 f42252se dovecot: auth: Debug: auth client connected (pid=14644) Jan 7 19:43:21 f42252se dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=pop3#011secured#011lip=192.168.110.150#011rip=192.168.110.165#011lport=995#011rport=43070 Jan 7 19:43:21 f42252se dovecot: auth: Debug: client out: CONT#0111#011 Jan 7 19:43:21 f42252se dovecot: auth: Debug: client in: CONT<hidden> Jan 7 19:43:21 f42252se dovecot: auth: Debug: ldap(qx42252006,192.168.110.165): pass search: base=ou=user,dc=averlon,dc=loc scope=onelevel filter=(&(objectClass=posixAccount)(uid=qx42252006)) fields=uid,userPassword Jan 7 19:43:21 f42252se dovecot: auth: Debug: ldap(qx42252006,192.168.110.165): result: uid(user)=qx42252006 userPassword(password)=<hidden> Jan 7 19:43:21 f42252se dovecot: auth: Debug: client out: OK#0111#011user=qx42252006 Jan 7 19:43:21 f42252se dovecot: auth: Debug: master in: REQUEST#0113145334785#01114644#0111#0115f6241afb0ff05d6b901a9a1edd65840 Jan 7 19:43:21 f42252se dovecot: auth: Debug: master out: USER#0113145334785#011qx42252006#011uid=5000#011gid=5000#011home=/home/vmail/qx42252006 Jan 7 19:43:21 f42252se dovecot: pop3-login: Login: user=<qx42252006>, method=PLAIN, rip=192.168.110.165, lip=192.168.110.150, mpid=14646, TLS Jan 7 19:43:21 f42252se dovecot: pop3(qx42252006): Disconnected: Logged out top=0/0, retr=0/0, del=0/0, size=0 Jan 7 19:43:27 f42252se dovecot: auth: Debug: auth client connected (pid=14649) Jan 7 19:43:28 f42252se dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=pop3#011secured#011lip=192.168.110.150#011rip=192.168.110.165#011lport=995#011rport=43071 Jan 7 19:43:28 f42252se dovecot: auth: Debug: client out: CONT#0111#011 Jan 7 19:43:28 f42252se dovecot: auth: Debug: client in: CONT<hidden> Jan 7 19:43:28 f42252se dovecot: auth: Debug: ldap(avadmin,192.168.110.165): pass search: base=ou=user,dc=averlon,dc=loc scope=onelevel filter=(&(objectClass=posixAccount)(uid=avadmin)) fields=uid,userPassword Jan 7 19:43:28 f42252se dovecot: auth: Debug: ldap(avadmin,192.168.110.165): result: uid(user)=avadmin userPassword(password)=<hidden> Jan 7 19:43:28 f42252se dovecot: auth: Debug: client out: OK#0111#011user=avadmin Jan 7 19:43:28 f42252se dovecot: auth: Debug: master in: REQUEST#0113661234177#01114649#0111#011abd1ac9fcd3ced2d9b01e090f3703ac0 Jan 7 19:43:28 f42252se dovecot: auth: Debug: master out: USER#0113661234177#011avadmin#011uid=5000#011gid=5000#011home=/home/vmail/avadmin Jan 7 19:43:28 f42252se dovecot: pop3-login: Login: user=<avadmin>, method=PLAIN, rip=192.168.110.165, lip=192.168.110.150, mpid=14650, TLS Jan 7 19:43:28 f42252se dovecot: pop3(avadmin): Disconnected: Logged out top=0/0, retr=0/0, del=0/2, size=4872 Jan 7 19:44:31 f42252se dovecot: auth: Debug: auth client connected (pid=14694) Jan 7 19:44:31 f42252se dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=pop3#011secured#011lip=192.168.110.150#011rip=192.168.110.165#011lport=995#011rport=43073 Jan 7 19:44:31 f42252se dovecot: auth: Debug: client out: CONT#0111#011 Jan 7 19:44:31 f42252se dovecot: auth: Debug: client in: CONT<hidden> Jan 7 19:44:31 f42252se dovecot: auth: Debug: ldap(qx42252008,192.168.110.165): pass search: base=ou=user,dc=averlon,dc=loc scope=onelevel filter=(&(objectClass=posixAccount)(uid=qx42252008)) fields=uid,userPassword Jan 7 19:44:31 f42252se dovecot: auth: Debug: ldap(qx42252008,192.168.110.165): result: uid(user)=qx42252008 userPassword(password)=<hidden> Jan 7 19:44:31 f42252se dovecot: auth: Debug: client out: OK#0111#011user=qx42252008 Jan 7 19:44:31 f42252se dovecot: auth: Debug: master in: REQUEST#011251920385#01114694#0111#011db7eed58edf0149fd176446b57c20a33 Jan 7 19:44:31 f42252se dovecot: auth: Debug: master out: USER#011251920385#011qx42252008#011uid=5000#011gid=5000#011home=/home/vmail/qx42252008 Jan 7 19:44:31 f42252se dovecot: pop3-login: Login: user=<qx42252008>, method=PLAIN, rip=192.168.110.165, lip=192.168.110.150, mpid=14698, TLS +++ Tell me what you need as additional info. Thanks for help -- Signatur Averlon info Mit freundlichen Grüßen / Kind Regards Karl-Heinz Fischbach Skype: khfischbach jabber: averlon(a)jabber.org Blog: averlon.posterous.com Signatur: Diese e-mail ist unter Umständen signiert. Die Signatur entspricht dem Deutschen Signaturgesetz und entsprechenden europäischen Regelungen. Important Note: This e-mail may contain trade secrets or privileged, undisclosed or otherwise confidential information. If you have received this e-mail in error, you are hereby notified that any review, copying or distribution of it is strictly prohibited. Please inform us immediately and destroy the original transmittal.

5 9

[Dovecot] problems with sieve
by Carsten Laun-De Lellis 10 Jan '13

10 Jan '13

Hi all I am running a simple mail server on ubuntu 12.04LTS with postfix 2.9.3 and dovecot 2.1.10. Since this morning sieve doesn't work anymore. I changed the sieve script forth and back but sieve is not working. I also replaced the sieve file with the backup, but no success. But I can't any error messages in the log files indicating any problem with sieve. The only thing I found is: Jan 10 00:03:26 vmd187 dovecot: lda(carsten.delellis(a)delellis.net): sieve: msgid=<12155505.mmailer335539222(a)fritz.box>: stored mail into mailbox 'Fritz!Box' -- with working sieve Jan 10 13:52:29 vmd187 dovecot: lda(carsten.delellis(a)delellis.net): msgid=<1898328495.2554803.1357821905269.JavaMail.app(a)ela4-app2316.prod>: saved mail to INBOX -- with sieve not working As you can see that after dovecot: lda(carsten.delellis(a)delellis.net): the sieve tag is missing. I have also attached my settings from 90-sieve.conf from dovecot configuration. ## ## Settings for the Sieve interpreter ## # Do not forget to enable the Sieve plugin in 15-lda.conf and 20-lmtp.conf # by adding it to the respective mail_plugins= settings. plugin { # The path to the user's main active script. # sieve = ~/.dovecot.sieve sieve = /vmail/%d/%n/dovecot.sieve # A path to a global sieve script file, which gets executed ONLY # if user's private Sieve script doesn't exist. Be sure to # pre-compile this script manually using the sievec command line # tool. sieve_global_path = /var/lib/dovecot/sieve/default.sieve # Directory for :personal include scripts for the include extension. # sieve_dir = ~/sieve sieve_dir = /vmail/%d/%n # Directory for :global include scripts for the include extension. sieve_global_dir = /var/lib/dovecot/sieve # Which Sieve language extensions are available to users. By default, # all supported extensions are available, except for deprecated # extensions or those that are still under development. Some system # administrators may want to disable certain Sieve extensions or # enable those that are not available by default. This setting can # use '+' and '-' to specify differences relative to the default. # For example `sieve_extensions = +imapflags' will enable the # deprecated imapflags extension in addition to all extensions # enabled by default. #sieve_extensions = +notify +imapflags # The separator that is expected between the :user and :detail # address parts introduced by the subaddress extension. This may # also be a sequence of characters (e.g. '--'). The current # implementation looks for the separator from the left of the # localpart and uses the first one encountered. The :user part is # left of the separator and the :detail part is right. This setting # is also used by Dovecot's LMTP service. recipient_delimiter = + # The maximum size of a Sieve script. The compiler will refuse to # compile any script larger than this limit. #sieve_max_script_size = 1M # The maximum number of actions that can be performed during a single # script execution. #sieve_max_actions = 32 # The maximum number of redirect actions that can be performed during # a single script execution. #sieve_max_redirects = 4 # The maximum number of personal Sieve scripts a single user can have. # (Currently only relevant for ManageSieve) #sieve_quota_max_scripts = 0 # The maximum amount of disk storage a single user's scripts may occupy. # (Currently only relevant for ManageSieve) #sieve_quota_max_storage = 0 } And also you can see that sieve is listening on port 4190 and managesieve on 2000 > lsof -i :4190 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME dovecot 2503 root 15u IPv4 14101 0t0 TCP *:sieve (LISTEN) dovecot 2503 root 16u IPv6 14102 0t0 TCP *:sieve (LISTEN) lsof -i :2000 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME dovecot 2503 root 17u IPv4 14103 0t0 TCP *:cisco-sccp (LISTEN) dovecot 2503 root 18u IPv6 14104 0t0 TCP *:cisco-sccp (LISTEN) I would appreciate any hints. Regards, Carsten Laun-De Lellis Hauptstrasse 13 D-67705 Trippstadt Phone: +49 6306 992140 Fax: +49 6306 992142 Mobile: +49 151 27530865 email: carsten.delellis(a)delellis.net http://www.linkedin.com/in/carstenlaundelellis

2 1

[Dovecot] Confused about "Authentication Mechanism" and "Password Schemes"
by Thomas Pries 10 Jan '13

10 Jan '13

Hi, I am currently setting up a Mailserver and decided to use Dovecot as IMAP/POP3-Server. I read the wiki an thought about how to transmit and store the passwords (I want to use a MySQL-database). I want to use encrypted transmission and encrypted storage. The wiki says: "If you want to use only one non-plaintext mechanism, you can store the passwords using the mechanism's own password scheme. " Ok, one secure mechanism is acceptable in my scenario and the wiki gives a list of supported authentication mechanisms and a list of supported password schemes. But I am missing the relation between the two lists, which mechanism expects which storage scheme? Did I overlooked any easy answer (other then "read the RFCs"). Best Regards Thomas

2 1

[Dovecot] v2.2.beta1 released
by Timo Sirainen 10 Jan '13

10 Jan '13

http://dovecot.org/releases/2.2/beta/dovecot-2.2.beta1.tar.gz http://dovecot.org/releases/2.2/beta/dovecot-2.2.beta1.tar.gz.sig Lots of fixes since 2.2.alpha1, especially related to dsync. Also dsync now supports syncing private message flags when INDEXPVT is used. Here's again the list of all the major changes in v2.2: * When creating home directories, the permissions are copied from the parent directory if it has setgid-bit set. For full details, see http://wiki2.dovecot.org/SharedMailboxes/Permissions * "doveadm auth" command was renamed to "doveadm auth test" * IMAP: ID command now advertises server name as Dovecot by default. It was already trivial to guess this from command replies. * dovecot.index.cache files can be safely accessed only by v2.1.11+. Older versions may think they're corrupted and delete them. + Implemented IMAP MOVE and BINARY extensions + Implemented IMAP CATENATE, URLAUTH and URLAUTH=BINARY extensions (by Stephan Bosch). + Implemented IMAP NOTIFY extension. Requires mailbox_list_index=yes to be enabled. + Redesigned and rewritten dsync. The new design makes the syncing faster, more reliable and more featureful. The new dsync protocol isn't backwards compatible with old dsync versions (but is designed to be forwards compatible with future versions). + All mailbox formats now support per-user message flags for shared mailboxes by using a private index. It can be enabled by adding :INDEXPVT=<path> to mail location. This should be used instead of :INDEX also for Maildir/mbox to improve performance. + Improved mailbox list indexes. They should be usable now, although still disabled by default. + Added LAYOUT=index. The mailbox directories are created using their GUIDs in the filesystem, while the actual GUID <-> name mapping exists only in the index. + LMTP proxy: Implemented XCLIENT extension for passing remote IP address through proxy.

2 4

[Dovecot] Mark Crispin - RIP
by Robert Moskowitz 09 Jan '13

09 Jan '13

'Father' of the IMAP protocol. Died Dec 28. http://en.wikipedia.org/wiki/Mark_Crispin Had a TOPS-20 in his basement that did a great job of keeping the house warm in the cool months (I remember one BAR bof where he extoled the benefits of this form of home heating).

3 2

[Dovecot] Squat FTS plugin not kicking in
by Frerich Raabe 09 Jan '13

09 Jan '13

Hi, I'm running Dovecot 2.1.12 on FreeBSD. I configured Dovecot to use the Squat plugin to provide faster full-text searches. The output of 'dovecot -n' is attached to this mail. However, I just noticed that this plugin doesn't seem to kick in. A raw telnet session seems to confirm this: [..] . SEARCH BODY abcdefg * OK Searched 57% of the mailbox, ETA 0:06 * SEARCH 3425 6254 14710 . OK Search completed (17.262 secs). . SEARCH BODY abcdefg * OK Searched 63% of the mailbox, ETA 0:05 * SEARCH 3425 6254 14710 . OK Search completed (18.651 secs). [..] A SEARCH BODY command doesn't create the dovecot.index.search or dovecot.index.search.uids files mentioned on http://wiki2.dovecot.org/Plugins/FTS/Squat . Also, two subsequent SEARCH BODY invocations don't seem to be any different as far as search time goes. I checked the logs but couldn't see anything which is related, except: Jan 8 21:36:10 imap2 dovecot: indexer-worker(frerich): Indexed 0 messages in INBOX Does anybody have some idea how to get more logging out of index-worker, or whether there's a flaw in my configuration? -- Frerich Raabe - raabe(a)froglogic.com www.froglogic.com - Multi-Platform GUI Testing

1 1

Re: [Dovecot] Migrating mailboxes - SOLVED
by Odhiambo Washington 09 Jan '13

09 Jan '13

On Wed, Jan 9, 2013 at 5:36 PM, Eduardo M KALINOWSKI < eduardo(a)kalinowski.com.br> wrote: > On Qua, 09 Jan 2013, Odhiambo Washington wrote: > >> See the output below >> >> [root@mail home]# cd johndoe/ >> [root@mail johndoe]# du -h mail/ >> 32K mail/.imap/Sent >> 40K mail/.imap/Trash >> 32K mail/.imap/Drafts >> 176K mail/.imap/INBOX >> 284K mail/.imap >> 88M mail/ >> > > Clearly most of the data (probably the emails) is not under the .imap > subdir, which is exactly what you didn't show us. It's probably mbox files. > > Sure! Looking further, I have found the mboxes and I am now able to migrate! Thanks for being my "third eye". That version of Dovecot had shocked my senses senseless!! -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ I can't hear you -- I'm using the scrambler.

1 0

[Dovecot] Migrating mailboxes
by Odhiambo Washington 09 Jan '13

09 Jan '13

Hello everyone and Happy 2013! I have a situation -- the first ever I have come across -- which I don't understand. A friend was/is running Postfix and Dovecot - with default configs - nothing was ever changed :-) [root@mail home]# dovecot --version 0.99.11 Anyway, he had a problem with a user mailbox which I wasn't able to diagnose and fix easily. maillog showed: Jan 9 16:11:29 mail imap-login: Login: userx [::ffff:127.0.0.1] Jan 9 16:11:29 mail imap(userx): file lib.c: line 37 (nearest_power): assertion failed: (num <= ((size_t)1 << (BITS_IN_SIZE_T-1))) Jan 9 16:11:29 mail dovecot: child 25217 (imap) killed with signal 6 Jan 9 16:12:03 mail imap-login: Login: userx [::ffff:127.0.0.1] Jan 9 16:12:03 mail imap(userx): file lib.c: line 37 (nearest_power): assertion failed: (num <= ((size_t)1 << (BITS_IN_SIZE_T-1))) Jan 9 16:12:03 mail dovecot: child 25229 (imap) killed with signal 6 Jan 9 16:13:15 mail pop3-login: Login: userx [::ffff:192.168.0.55] Jan 9 16:13:15 mail pop3(userx): file lib.c: line 37 (nearest_power): assertion failed: (num <= ((size_t)1 << (BITS_IN_SIZE_T-1))) My aim is not to fix the above. I have reconfigured both Postfix and Dovecot to use Maildir now and things are fine (not securitywise, but I don't care about that) for now. However, I'd like to migrate old mail for some users, but I don't know how to go about this, given the mailbox format, which I don't understand: Here is what a typical one looks like: [root@mail home]# ls -al johndoe/mail/.imap/ total 24 drwx------ 6 johndoe users 4096 May 27 2010 . drwx------ 3 johndoe users 4096 May 27 2010 .. drwx------ 2 johndoe users 4096 May 27 2010 Drafts drwx------ 2 johndoe users 4096 Jan 9 15:46 INBOX drwx------ 2 johndoe users 4096 May 27 2010 Sent drwx------ 2 johndoe users 4096 May 27 2010 Trash [root@mail home]# ls -al johndoe/mail/.imap/INBOX/ total 180 drwx------ 2 johndoe users 4096 Jan 9 15:46 . drwx------ 6 johndoe users 4096 May 27 2010 .. -rw------- 1 johndoe users 5 Dec 18 2007 .customflags -rw------- 1 johndoe users 10272 Jan 9 15:46 .imap.index -rw------- 1 johndoe users 132774 Jan 9 11:27 .imap.index.data -rw------- 1 johndoe users 5136 Sep 26 2011 .imap.index.log -rw------- 1 johndoe users 9404 Jan 8 18:44 .imap.index.tree [root@mail home]# ls -al johndoe/mail/.imap/Sent/ total 36 drwx------ 2 johndoe users 4096 May 27 2010 . drwx------ 6 johndoe users 4096 May 27 2010 .. -rw------- 1 johndoe users 5 May 27 2010 .customflags -rw------- 1 johndoe users 1608 May 27 2010 .imap.index -rw------- 1 johndoe users 10264 May 27 2010 .imap.index.data -rw------- 1 johndoe users 2576 May 27 2010 .imap.index.log -rw------- 1 johndoe users 1556 May 27 2010 .imap.index.tree [root@mail home]# ls -al johndoe/mail/.imap/Drafts/ total 36 drwx------ 2 johndoe users 4096 May 27 2010 . drwx------ 6 johndoe users 4096 May 27 2010 .. -rw------- 1 johndoe users 5 May 27 2010 .customflags -rw------- 1 johndoe users 1608 May 27 2010 .imap.index -rw------- 1 johndoe users 10264 May 27 2010 .imap.index.data -rw------- 1 johndoe users 2576 May 27 2010 .imap.index.log -rw------- 1 johndoe users 1556 May 27 2010 .imap.index.tree [root@mail home]# ls -al johndoe/mail/.imap/Trash/ total 44 drwx------ 2 johndoe users 4096 May 27 2010 . drwx------ 6 johndoe users 4096 May 27 2010 .. -rw------- 1 johndoe users 5 May 27 2010 .customflags -rw------- 1 johndoe users 1608 May 27 2010 .imap.index -rw------- 1 johndoe users 17950 May 27 2010 .imap.index.data -rw------- 1 johndoe users 2576 May 27 2010 .imap.index.log -rw------- 1 johndoe users 1556 May 27 2010 .imap.index.tree How can I migrate these mails into /home/johndoe/Maildir/ ?? They don't seem like mbox to me so mb2md.pl doesn't seem to apply here.. -- Best regards, Odhiambo WASHINGTON, Nairobi,KE +254733744121/+254722743223 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ I can't hear you -- I'm using the scrambler.

5 9