- dovecot - dovecot.org

[Dovecot] Postfix & Dovecot: Client certificate authentication
by "JARRY Jérémy" 16 Aug '12

16 Aug '12

Hello, I would like to set up an authentication using certificate with Dovecot: A user sends mail to Postfix and Dovecot authentication is valid only if certificate is trusted. So, I enable the parameter auth_ssl_require_client_cert in dovecot configuration but it is not running. Here are the postfix logs: Aug 16 09:51:48 myserver dovecot: auth: Debug: Loading modules from directory: /usr/lib64/dovecot/auth Aug 16 09:51:48 myserver dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libauthdb_ldap.so Aug 16 09:51:48 myserver dovecot: auth: Debug: auth client connected (pid=6922) Aug 16 09:51:51 myserver dovecot: auth: Debug: client in: AUTH 1 PLAIN service=smtp nologin lip=127.0.0.1 rip=127.0.0.1 secured resp=xxx Aug 16 09:51:51 myserver postfix/smtpd[6922]: warning: localhost.localdomain[127.0.0.1]: SASL PLAIN authentication failed: Client didn't present valid SSL certificate Aug 16 09:51:51 myserver dovecot: auth: PLAIN(?,127.0.0.1): Client didn't present valid SSL certificate Aug 16 09:51:51 myserver dovecot: auth: Debug: client out: FAIL 1 reason=Client didn't present valid SSL certificate Aug 16 09:51:51 myserver dovecot: auth: Debug: client in: AUTH 2 LOGIN service=smtp nologin lip=127.0.0.1 rip=127.0.0.1 secured Aug 16 09:51:51 myserver dovecot: auth: LOGIN(?,127.0.0.1): Client didn't present valid SSL certificate Aug 16 09:51:51 myserver dovecot: auth: Debug: client out: FAIL 2 reason=Client didn't present valid SSL certificate Aug 16 09:51:51 myserver postfix/smtpd[6922]: warning: localhost.localdomain[127.0.0.1]: SASL LOGIN authentication failed: Client didn't present valid SSL certificate It seems Postfix doesn't send the client certificat to Dovecot. What do you think ? What is wrong ? Below are some information about my configuration: OS: RHEL5 Postfix: 2.7.3 Dovecot: 2.0.14 Dovecot config: auth_debug = yes auth_debug_passwords = yes auth_mechanisms = plain login auth_ssl_require_client_cert = yes auth_ssl_username_from_cert = yes auth_verbose = yes mail_debug = yes passdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } protocols = none service auth { unix_listener /data/postfix/private/auth { group = postfix mode = 0660 user = postfix } user = root } ssl = required ssl_ca = </etc/dovecot/ca.pem ssl_cert = </etc/dovecot/cert.pem ssl_key = </etc/dovecot/key.pem ssl_verify_client_cert = yes userdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } verbose_ssl = yes Thanks for your help

2 1

[Dovecot] bcrypt again
by Sven Schwyn 15 Aug '12

15 Aug '12

Hi I'd like Dovecot to consume a list of users exported from an external application which stores bcrypted passwords. This has been asked in the past, however, I'm not sure how to read the following reply: > If you are using Dovecot< 2.0 you can also use any of the algorithms > supported by your system's libc. But then you have to prefix the hashes > with {CRYPT} - not {{BLF,SHA256,SHA512}-CRYPT}. I'm on Dovecot 2.0.19. Does this mean that only the hashes listed with "doveadm pw -l" are supported and even if glibc can do bcrypt, the CRYPT scheme won't do the trick anymore? Thanks for your help!

2 1

[Dovecot] Thread sorting problem
by CpServiceSPb 15 Aug '12

15 Aug '12

Hi. How much may implementing of THREAD=ORDEREDSUBJECT to Dovecot 2.1.x or later cost ? Artyom.

2 2

[Dovecot] about postlogin in dovecot2
by Bulend Mali 15 Aug '12

15 Aug '12

Hello I use dovecot2 on vpopmail,qmail. i want to use login-intranet-imap.sh in order to restrict by emailaddress and ip address. i read it at http://wiki2.dovecot.org/PostLoginScripting. But there is an expression "mail_executable" in conf. but there is no such thing in dovecot2. what is equivalent of it for dovecot2 ? -- View this message in context: http://old.nabble.com/about-postlogin-in-dovecot2-tp34275123p34275123.html Sent from the Dovecot mailing list archive at Nabble.com.

4 14

[Dovecot] vacation and field FROM
by Николай Клименко 14 Aug '12

14 Aug '12

Hi to all Here is the following scheme: Dovecot in a link with AD. For LDA and IMAP different views are used in a base. For example there is a user with such e-mail type - 1.name(a)domain.ltd with the name of authorization auth_1.name. Incoming male folds up in /var/mail/domain/auth_1.name When vacation is on, the letters from 1.name(a)domain.ltd are sent in a following way auth_1.name(a)domain.ltd I guess the problem is in two different data-base queries. Could you please tell me how to solve this problem and to make the answer to be sent from the same adress it is comes to. part of dovecot.conf protocol lda { mail_plugins = sieve acl hostname = domain.ltd postmaster_address = <postmaster(a)domain.ltd> auth_socket_path = /var/run/dovecot/auth-master_lda log_path = /var/log/dovecot-deliver.log } auth default { verbose = no debug = no debug_passwords = no mechanisms = plain user = dovecot passdb passwd-file { args = /etc/dovecot/passwd.masterusers master = yes } passdb ldap { args = /etc/dovecot/dovecot-ldap.conf } userdb static { args = uid=20000 gid=20000 home=/opt/mail/user_mailbox/%Lu allow_all_users=yes } socket listen { master { path = /var/run/dovecot/auth-master mode = 0660 user = vmail group = vmail } client { path = /var/spool/postfix/private/dovecot-auth mode = 0660 user = postfix group = postfix } } } auth auth_lda { verbose = no debug = no debug_passwords = no mechanisms = plain user = dovecot passdb ldap { args = /etc/dovecot/dovecot-ldap_lda.conf } userdb ldap { args = /etc/dovecot/dovecot-ldap_lda.conf } socket listen { master { path = /var/run/dovecot/auth-master_lda mode = 0660 user = vmail group = vmail } part of dovecot-ldap.conf (filter options) pass_attrs = sAMAccountName=user pass_filter = (&(sAMAccountName=%u)(objectClass=user)(!(userAccountControl:1.2.840.113556.1.4.803:=2))) part of dovecot-ldap_lda.conf user_attrs = sAMAccountName=user user_filter = (mail=%u) pass_attrs = sAMAccountName=user pass_filter = (mail=%u) --

1 0

[Dovecot] Libdovecot-sieve segfaults
by Nikita Koshikov 14 Aug '12

14 Aug '12

Hello Stephan, Preface - one of my users went to vacation and changed his sieve script to run autoreply vacation message, after that - I have noticed some annoying errors in system log, like: dovecot-lda[2400]: segfault at 3eb3333f ip b7446c7a sp bfaab050 error 4 in libdovecot-sieve.so.0.0.0[b7429000+5b000] Dovecot-error log is empty, but in exim log(exim runs dovecot-lda) I got: 2012-08-13 09:35:27 1T0oFK-0000aW-6j ** sr(a)domain.com (sr(a)domain.com, root(a)domain.com) <postmaster(a)domain.com > F=<59942270813(a)mymail.in.ua> R=ldap_accept T=local_delivery: Child process of local_delivery transport (running command "/usr/libexec/dovecot/dovecot-lda -e -d $local_part@$domain") was terminated by signal 11 (Segmentation fault) sr(a)domain.com - is the user, who created such sieve-script, which cause segfaults. I have tried run the same message over this script from sieve-test utility - but result is success. Can you please, take a look to this sieve script and check is it ok, I'll send it to you privately since it contains user's data. Also I'll attach message.eml which triggers segfault. Dovecot version - 2.0.21, Sieve version - 0.2.6. Relevant to sieve dovecot config section: plugin { sieve = ~/.dovecot.sieve sieve_after = /etc/dovecot/sieve/default-after.sieve sieve_dir = ~/sieve sieve_extensions = +notify +spamtest sieve_spamtest_max_value = 10 sieve_spamtest_status_header = X-Spam-Scan-Score sieve_spamtest_status_type = score } Hope you'll help.

1 0

[Dovecot] pop3 proxying error
by tonio＠starbridge.org 13 Aug '12

13 Aug '12

Hi Timo, I've got some errors with pop3 proxying and dovecot 2.1.9 I's occured on the proxy side: Aug 7 13:16:47 dev1 dovecot: pop3-login: Fatal: master: service(pop3-login): child 23046 killed with signal 11 (core dumped) Server side shows no error, and runs the same dovecot version. Thanks for your help. Best regards Tonio Buonaguidi Core dump: GNU gdb (GDB) 7.4.1-debian Copyright (C) 2012 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "i486-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/lib/dovecot/pop3-login...done. [New LWP 23046] warning: Can't read pathname for load map: Erreur d'entrée/sortie. [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/i386-linux-gnu/i686/cmov/libthread_db.so.1". Core was generated by `dovecot/pop3-login -D'. Program terminated with signal 11, Segmentation fault. #0 settings_parser_dup (old_ctx=0x8783480, new_pool=0x632e6465) at settings-parser.c:1742 1742 pool_ref(new_pool); doveconf -n # 2.1.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32.2-xxxx-std-ipv6-32 i686 Debian wheezy/sid auth_cache_size = 4 k auth_mechanisms = plain login director_mail_servers = bb.bb.bb.bb cc.cc.cc.cc director_servers = dd.dd.dd.dd aa.aa.aa.aa log_timestamp = %Y-%m-%d %H:%M:%S mail_debug = yes managesieve_notify_capability = mailto managesieve_sieve_capability = comparator-i;octet comparator-i;ascii-casemap fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date spamtest spamtestplus virustest passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } protocols = imap pop3 sieve service auth { unix_listener /var/spool/postfix/private/auth { group = mail mode = 0660 user = postfix } unix_listener auth-master { mode = 0660 user = vmail } unix_listener auth-userdb { mode = 0660 user = vmail } } service director { fifo_listener login/proxy-notify { mode = 0666 } inet_listener { address = aa.aa.aa.aa port = 9090 } unix_listener director-userdb { mode = 0600 } unix_listener login/director { mode = 0666 } } service imap-login { executable = imap-login director inet_listener imap { address = aa.aa.aa.aa yy.yyy.yy.yy xx.xx.xx.xx port = 143 } inet_listener imaps { address = aa.aa.aa.aa yy.yyy.yy.yy xx.xx.xx.xx port = 993 } process_limit = 256 process_min_avail = 2 service_count = 0 vsz_limit = 256 M } service managesieve-login { inet_listener sieve { address = aa.aa.aa.aa yy.yyy.yy.yy xx.xx.xx.xx port = 4190 } vsz_limit = 64 M } service pop3-login { executable = pop3-login -D inet_listener pop3 { address = aa.aa.aa.aa yy.yyy.yy.yy xx.xx.xx.xx port = 110 } inet_listener pop3s { address = aa.aa.aa.aa yy.yyy.yy.yy xx.xx.xx.xx port = 995 } service_count = 0 } ssl_ca = </etc/dovecot/ca-bundle.crt ssl_cert = </etc/dovecot/imap.xxx.certchained2.pem ssl_client_cert = </etc/dovecot/imap.xxx.certchained2.pem ssl_client_key = </etc/dovecot/imap.xxx.key.pem ssl_key = </etc/dovecot/imap.xxx.key.pem userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } protocol imap { imap_client_workarounds = delay-newmail imap_max_line_length = 64 k mail_max_userip_connections = 10 } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } protocol sieve { passdb { args = /etc/dovecot/sieve-sql.conf driver = sql } } local xx.xx.xx.xx { disable_plaintext_auth = no } local yy.yyy.yy.yy { protocol imap { ssl = required ssl_cert = </etc/dovecot/mail.pem ssl_key = </etc/dovecot/mail.key.pem } } local yy.yyy.yy.yy { protocol sieve { ssl = required ssl_cert = </etc/dovecot/mail.pem ssl_key = </etc/dovecot/mail.pem } } local xx.xx.xx.xx { protocol imap { ssl = yes ssl_cert = </etc/dovecot/imap.certchained.pem ssl_key = </etc/dovecot/imap.key.pem } } local xx.xx.xx.xx { protocol pop3 { ssl = yes ssl_cert = </etc/dovecot/pop.certchained.pem ssl_key = </etc/dovecot/pop.key.pem } } local xx.xx.xx.xx { protocol sieve { ssl = yes ssl_cert = </etc/dovecot/mail.certchained.pem ssl_key = </etc/dovecot/mail.key.pem } }

2 10

[Dovecot] HA Mailbox Design
by Nikolaos Milas 13 Aug '12

13 Aug '12

Hi, We would like to implement a Highly Available Mail Server and would like to ask advice on how to architect this. Some details on our setup: Currently we have only one internal mail server (Postfix/Dovecot 2.0 - planning to move to 2.1), receiving mail from a gateway server (filtering spam/viruses) - a Cisco Ironport - which we are considering to replace with one (or a set of) cloud-based Postfix/Amavis-new/SpamAssassin/ClamAV VMs (currently in testing mode). Delivery uses Dovecot LDA. User accounts are LDAP-based. We use Maildir and the load is low (aside spam). Only about 250 users/mailboxes (4G each). All servers are CentOS 5.8 (planning move to 6.3) KVM VMs (on a cloud where we don't have control on the host, but on highly reliable hardware/networks). We can have VMs on two different clouds and we also have at least two different connections (routes) to the cloud(s) (to support HA). Any directions will be appreciated. Hoping to design an HA architecture but aiming to keep it simple and (as much as possible) easily maintainable one. Thanks for your response and help, Nick

5 8

[Dovecot] master user auth problem
by Ibrahim Harrani 13 Aug '12

13 Aug '12

Hi, I tried to setup a master auth authentication. I also use auth_pop3wrapper to authenticate from qmail-ldap. But I could not login with master user. Here is the config. auth_master_user_separator = * passdb { driver = passwd-file args = /usr/local/etc/dovecot/passwd.masterusers master = yes pass = yes } passdb { # Path for checkpassword binary driver = checkpassword args = /var/qmail/bin/auth_popwrapper } userdb { driver = prefetch } cat /opt/surmail/etc/dovecot/passwd.masterusers user:{SHA}W6ph5Mm5Pz8GgiULbPgzG37mj9g= The log: #telnet localhost 143 Trying 0.0.0.0... Connected to 0. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN] SurGATE Messaging Suite POP3/IMAP ready. o login user(a)domain.com*user password o NO [AUTHORIZATIONFAILED] Authorization failed Aug 09 16:17:44 auth: Debug: auth(user,127.0.0.1,master,<KmGNDdXGrwB/AAAB>): Master user lookup for login: user(a)domain.com Aug 09 16:17:44 auth: Debug: passwd-file(user,127.0.0.1,master,<KmGNDdXGrwB/AAAB>): lookup: user=user file= /usr/local/etc/dovecot/passwd.masterusers Aug 09 16:17:44 auth: Info: passdb(user,127.0.0.1,master,<KmGNDdXGrwB/AAAB>): Master user logging in as user(a)domain.com Aug 09 16:17:44 auth: Debug: checkpassword(user(a)domain.com,127.0.0.1,<KmGNDdXGrwB/AAAB>): execute: /var/qmail/bin/auth_popwrapper /usr/local/dovecot/libexec/dovecot/checkpassword-reply Aug 09 16:17:44 auth: Debug: checkpassword(user(a)domain.com,127.0.0.1,<KmGNDdXGrwB/AAAB>): Received input: Aug 09 16:17:44 auth: Debug: checkpassword(user(a)domain.com,127.0.0.1,<KmGNDdXGrwB/AAAB>): exit_status=3 Aug 09 16:17:44 auth: Info: checkpassword(user(a)domain.com,127.0.0.1,<KmGNDdXGrwB/AAAB>): Login failed (status=3) Aug 09 16:17:46 auth: Debug: client out: FAIL 1 user=user(a)domain.com authz Aug 09 16:18:08 auth: Debug: client in: AUTH 2 PLAIN service=imap secured session=KmGNDdXGrwB/AAAB lip=127.0.0.1 rip=127.0.0.1 lport=143 rport=48047 resp=<hidden>

1 0

[Dovecot] Running spamc during LMTP delivery
by martin f krafft 12 Aug '12

12 Aug '12

Hello list, we are using dovecot-lmtp for delivery to virtual users, and vmm[1] to manage them. 1. http://vmm.localdomain.org/ One nice feature of vmm is that every virtual user has their own UID/GID on the UNIX filesystem. There is no passwd entry, so no shell login, but each user effectively has a home directory and can run commands in isolation and with lowered privileges. This requires dovecot-lmtp because only the LMTP LDA runs with root rights and can drop privileges to become the specific user for which it is delivering mail. We would now like to run SpamAssassin with the possibility of using the antispam plugin to enable virtual users to train their databases. Do you have an idea how I could let dovecot-lmtp invoke spamc? Or an external command as a filter, to be run by the final user? Thanks, -- martin | http://madduck.net/ | http://two.sentenc.es/ "truth is stranger than fiction, but it is because fiction is obliged to stick to possibilities; truth isnt." -- mark twain spamtraps: madduck.bogus(a)madduck.net

4 6

[Dovecot] Exim and Dovecot
by Rafael Nathan 11 Aug '12

11 Aug '12

Hi, I am installing Exim and Dovecot through yum on my Centos 5 x86_64 machine. Exim is unable to find the virtual users. Is there a full-fledged guide to get the two working. Any help is highly appreciated. Regards, Rafael

1 0

[Dovecot] looking for information on Vacation auto-reply
by rob 11 Aug '12

11 Aug '12

Hello We are looking for information on how to use Vacation auto-reply . I've read http://wiki2.dovecot.org/Pigeonhole/Sieve/Usage and a few other pages, but have not found how to set it up. We use sogo and thunderbird . Is there a how to or document for this somewhere? This is our configuration information: dovecot -n # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-2-amd64 x86_64 Debian wheezy/sid auth_mechanisms = plain login auth_username_format = %Ln lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes mail_location = maildir:%h/Maildir mail_plugins = " quota" maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { inbox = yes location = prefix = INBOX. separator = . type = private } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { mail_plugins = quota sieve quota = fs:user quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u quota_warning3 = storage=60%% quota-warning 60 %u quota_warning4 = storage=40%% quota-warning 40 %u sieve = ~/.dovecot.sieve sieve_before = /etc/dovecot/sieve/spam.sieve sieve_dir = ~/sieve sieve_global_dir = /etc/dovecot/sieve/ } postmaster_address = fbcadmin(a)fantinibakery.com protocols = " imap lmtp sieve" quota_full_tempfail = yes service auth-worker { user = $default_internal_user } service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } unix_listener auth-userdb { group = postfix mode = 0600 user = postfix } } service imap-login { service_count = 0 vsz_limit = 128 M } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } process_min_avail = 1 service_count = 0 vsz_limit = 256 M } service quota-warning { executable = script /fbc/bin/mail/quota-warning.sh user = dovecot } ssl = required ssl_ca = </etc/postfix/ssl/gd_bundle.crt ssl_cert = </etc/postfix/ssl/mail.fantinibakery.com.crt ssl_key = </etc/postfix/ssl/mail.fantinibakery.com.key userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol lmtp { mail_plugins = quota sieve } protocol imap { mail_max_userip_connections = 30 mail_plugins = " quota imap_quota" plugin { antispam_backend = spool2dir antispam_signature = X-DSPAM-Signature antispam_spam = Junk antispam_spool2dir_notspam = /var/spamtrain/not-spam/%%020lu-%u-%%05 antispam_spool2dir_spam = /var/spamtrain/spam/%%020lu-%u-%%05 antispam_trash = Trash antispam_verbose_debug = 1 } } protocol sieve { mail_debug = yes managesieve_implementation_string = Dovecot Pigeonhole }

3 5

[Dovecot] lmtp: Error: mmap failed with file ... dovecot.index.cache: Cannot allocate memory
by David Jonas 10 Aug '12

10 Aug '12

Hello, I have a mailbox with an ungodly number of small messages in it. When new messages are delivered lmtp kicks up an error like the one below. I tried raising the vsz_limit for lmtp but that didn't see to help. Any ideas (besides deleting 400k messages)? Thanks! dovecot: lmtp(6068, user(a)example.com) Error: mmap() failed with file /home/vmail/domains/example.com/user/Maildir/dovecot.index.cache: Cannot allocate memory # ls -lah dovecot.index.cache -rw------- 1 vmail vmail 128M Jul 29 20:16 dovecot.index.cache # doveadm mailbox status -u user(a)example.com all inbox INBOX messages=434118 recent=59848 uidnext=434119 uidvalidity=1293568548 unseen=432625 highestmodseq=14023 vsize=1329486283 guid=f8d48232244a1a4dfe2e0000cb0ad7e0 # doveconf -n ... default_vsz_limit = 256 M service lmtp { inet_listener lmtp { port = 24 } vsz_limit = 256 M }

2 3

[Dovecot] postfix mysql quota map to dovecot dict in mysql
by Benny Pedersen 10 Aug '12

10 Aug '12

currently dovecot dict is CREATE TABLE IF NOT EXISTS `quota` ( `username` varchar(100) COLLATE latin1_general_ci NOT NULL, `bytes` bigint(20) NOT NULL DEFAULT '0', `messages` int(11) NOT NULL DEFAULT '0', PRIMARY KEY (`username`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 COLLATE=latin1_general_ci; there is not field that says how much quota each user have, so one cant make a query on how much its left pr user how can i resolve this in dovecot dict ? i like to do an postfix mysql map to temp reject if quota is out of limit -- Benny Pedersen

3 4

[Dovecot] Server side Sieve with virtual users
by Luigi Rosa 10 Aug '12

10 Aug '12

Is there a way to implement server-side filters with Dovecot configured with virtual users (userbase in mysql, a single *NIX user account that owns /var/spool/mail and its content)? Thanks Ciao, luigi -- / +--[Luigi Rosa]-- \ A generation which ignores history has no past... and no future.

3 3

Re: [Dovecot] Server side Sieve with virtual users
by Adrian Minta 09 Aug '12

09 Aug '12

On 08/09/12 20:10, Luigi Rosa wrote: > Adrian Minta said the following on 09/08/2012 18:33: > >>> Is there a way to implement server-side filters with Dovecot >>> configured with >>> virtual users (userbase in mysql, a single *NIX user account that owns >>> /var/spool/mail and its content)? > >> Yes ! > > :) > > And the webpage/wikipage with documentation about this is.... ? > > > Ciao, > luigi > First step is to have a mail system that works without sieve. This is the hard part. Depending on your preferred distro here are two nice webpages for this: http://wiki.mediatemple.net/w/(ve):Install_Postfix_with_Dovecot_on_CentOS http://workaround.org/ispmail Second step is to enable sieve, for witch you only need to uncomment the specific lines from dovecot.conf. For dovecot 1.2, you will have something like: protocols = pop3 pop3s imap imaps managesieve protocol lda { ... mail_plugins: quota sieve } protocol managesieve { } plugin { ... sieve=~/.dovecot.sieve sieve_dir=~/sieve } -- Best regards, Adrian Minta

3 4

[Dovecot] Dovecot LMTP - Delivered-To header weirdness
by Daniel Piddock 09 Aug '12

09 Aug '12

Hi, I'm not sure if this is a deliberate design decision or a technical limitation that I've missed. Please briefly explain if so :). Or a bug or feature request? When LMTP receives a mail with a single recipient it adds a Delivered-To header. However if the message is delivered in a batch that header isn't added. At first I thought maybe the LMTP was doing something with hardlinks but that doesn't appear to be the case (for rather obvious reasons.) Sample headers (single recipient): Return-Path: <user(a)domain.test> Delivered-To: <user(a)domain.test> Received: from mx.domain.test ([127.0.0.1]) by domain.test (Dovecot) with LMTP id ZNTPFX2NI1CcCwAAVMeomg for <user(a)domain.test>; Thu, 09 Aug 2012 11:14:21 +0100 Envelope-to: user(a)domain.test Delivery-date: Thu, 09 Aug 2012 11:14:21 +0100 Received: from host.domain.test ([172.16.252.1]:44058) by relay.domain.test ([172.16.252.120]:25) with esmtp id 1SzPkz-0000lz-7v (Exim 4.80) for user(a)domain.test (return-path <user(a)domain.test>); Thu, 09 Aug 2012 11:14:21 +0100 Message-ID: <50238D7D.2000707(a)domain.test> Date: Thu, 09 Aug 2012 11:14:21 +0100 From: User <user(a)domain.test> To: User <user(a)domain.test> Subject: test And an expansion list: Return-Path: <user(a)domain.test> Received: from mx.domain.test ([127.0.0.1]) by domain.test (Dovecot) with LMTP id Gf+yBmiNI1CECwAAVMeomg ; Thu, 09 Aug 2012 11:14:00 +0100 Envelope-to: expansion(a)domain.test Delivery-date: Thu, 09 Aug 2012 11:14:00 +0100 Received: from host.domain.test ([172.16.252.1]:44053) by relay.domain.test ([172.16.252.120]:25) with esmtp id 1SzPkd-0000ls-Qr (Exim 4.80) for expansion(a)domain.test (return-path <user(a)domain.test>); Thu, 09 Aug 2012 11:13:59 +0100 Message-ID: <50238D67.3090802(a)domain.test> Date: Thu, 09 Aug 2012 11:13:59 +0100 From: User <user(a)domain.test> To: Expansion <expansion(a)domain.test> Subject: test At the moment we've turned off batch delivery in the exim smtp transport (max_rcpt=1). Cheers, Dan -- Daniel Piddock, Systems Administrator, CoreFiling Limited http://www.corefiling.com

3 3

[Dovecot] dovecot rpm packages for CentOS ?
by Spyros Tsiolis 09 Aug '12

09 Aug '12

Hello all again, Has anyone any idea how to get the latest dovecot version for CentOS 5.8 or 6.2 32-bit OS ? I did a quick search and found out that the official version of dovecot for CentOS v5.8 is 1.0.2 (!!). Any repos ? Any ideas :-) ? Thank you all, spyros ---- "I merely function as a channel that filters music through the chaos of noise" - Vangelis

2 2

Re: [Dovecot] dovecot rpm packages for CentOS ?
by Vladimir Bukov 09 Aug '12

09 Aug '12

On Thu, August 9, 2012 4:31 pm, Spyros Tsiolis wrote: > > Hello all again, > > Has anyone any idea how to get the latest dovecot version for CentOS > > 5.8 or 6.2 32-bit OS ? > > I did a quick search and found out that the official version of dovecot > > for CentOS v5.8 is 1.0.2 (!!). > > > > Any repos ? Any ideas :-) ? > http://www.city-fan.org/ftp/contrib/mail/

2 1

[Dovecot] dovecot+LDAP/AD encoding issue
by Wiethoff, Helge 09 Aug '12

09 Aug '12

Hello everybody, i have a problem with dovecot+Active Directory as Authentication-Service. I am not able to use special characters (äöüß (german umlaut)) within a password. Normally I would suggest that the ldap-query is done in UTF-8 but as I debugged the auth-process, I have seen that the password is ISO-8859-1 encoded. The "original" query (from roundcube for example) is UTF-8 encoded (I dumped the POST-Query). So far I wasn't able to find my error by myself or by searching the web. Maybe someone of you can give me a hint :-) Thanks and greetings from Germany, Helge ---- dovecot --version 2.0.16 ---- D-AS01:/etc/dovecot # grep -v '^ *$#.*$\?$' dovecot-ldap.conf.ext uris = ldap://10.37.5.90 dn = CN=ldap-d-as01,CN=Users,DC=tfh-bochum,DC=de dnpass = xxxx auth_bind = yes ldap_version = 3 base = ou=Benutzer, ou=Lehre, dc=tfh-bochum, dc=de user_attrs = =uid=10000,=gid=10000,=home=/srv/mail/%Ld/%Ln user_filter = mail=%u pass_attrs = =uid=10000,=gid=10000,=home=/srv/mail/%Ld/%Ln pass_filter = (&(mail=%u)(!(extensionAttribute3=*))) ---- dovecot -n # 2.0.16: /etc/dovecot/dovecot.conf # OS: Linux 2.6.37.6-0.11-default x86_64 openSUSE 11.4 (x86_64) auth_debug = yes auth_mechanisms = plain login auth_username_translation = %Lu auth_verbose = yes mail_location = maildir:~/Maildir mail_max_userip_connections = 1000 mail_plugins = quota managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { inbox = yes list = yes location = prefix = INBOX/ separator = / subscriptions = yes type = private } namespace { list = yes location = maildir:%%h/Maildir:INDEX=%h/Maildir/shared/%%u:CONTROL=%h/Maildir/shared/%%u prefix = shared/%%u/ separator = / subscriptions = yes type = shared } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile acl_shared_dict = file:/srv/mail/shared-mailboxes quota = maildir:Quota quota_rule = *:storage=1G sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_max_redirects = 10 } protocols = imap pop3 sieve lmtp service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0770 user = root } } service imap-login { process_min_avail = 4 service_count = 0 } service managesieve-login { inet_listener sieve { address = * port = 4190 } inet_listener sieve_deprecated { address = * port = 2000 } process_min_avail = 2 service_count = 0 } ssl_ca = </etc/ssl/certs/tfh_dfn_dtag_cacert.pem ssl_cert = </etc/ssl/certs/imap.stud.tfh-bochum.de-20110530-cert-302177588.pem ssl_key = </etc/ssl/private/imap.stud.tfh-bochum.de-20110530.key userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol lmtp { mail_plugins = quota } protocol imap { mail_plugins = quota acl imap_acl imap_quota } protocol pop3 { mail_plugins = quota } ________________________________ Helge Wiethoff Medienzentrum Telefon: +49 (234) 968 8717 Fax: +49 (234) 968 3453 E-Mail: Wiethoff(a)tfh-bochum.de Technische Fachhochschule Georg Agricola für Rohstoff, Energie und Umwelt zu Bochum Staatlich anerkannte Fachhochschule der DMT-Gesellschaft für Lehre und Bildung mbH Herner Straße 45 44787 Bochum http://www.tfh-bochum.de ________________________________ Träger: DMT-Gesellschaft für Lehre und Bildung mbH Sitz der Gesellschaft: Bochum Registergericht: Amtsgericht Bochum Handelsregister: B 4052 Geschäftsführung: Prof. Dr. Jürgen Kretschmann (Vorsitzender) Manfred Freitag

3 4

Re: [Dovecot] some mdbox mails get lost each day
by Timo Sirainen 09 Aug '12

09 Aug '12

On 9.8.2012, at 11.24, Christian Rößner wrote: > I had enabled mail_log and search for any kind of errors. None. Only expunge messages from a imap process. Which I thought was Outlook. But isn't. So there is an imap expunge entry for all of the mails that get lost? You should be able to match that with the IMAP client's IP address by using session IDs, for example: mail_log_prefix = "%s(%u) <%{session}>: " Also you may be able to find out what client is doing it by setting: imap_id_log = *

1 0

[Dovecot] Mail deletion and Solr index update
by Matthias Rieber 09 Aug '12

09 Aug '12

Hi, I've deleted 10000s emails and it seems that every mail is removed with a single request from Solrs index. This works, but it's quite slow. Is it possible/plans to improve that? Matthias

2 4

[Dovecot] Quota dict configuration
by Uros 08 Aug '12

08 Aug '12

Hi, I have enabled quota dict with mysql following wiki http://wiki2.dovecot.org/Quota/Dict Everything work as expected. I just have a question about query used for updating quota usage. I already check the source file dict-sql.c but i still can't figure it out. I store user info in a mysql table where only left (user) part of an email address is stored with foreign id for domain conected to domain table. The problem is administration because quota table have primary key whole email. Is there even possible to configure quota dict settings to use separate variables %n and %d like in user and password query? -- lp Uroš

1 0

[Dovecot] Statistics scripts
by Timo Sirainen 08 Aug '12

08 Aug '12

I wrote two scripts, which you can use with the stats plugin enabled to get a better "doveadm stats top" than it currently is: http://dovecot.org/tools/stats-top.pl http://dovecot.org/tools/stats.pl

2 1

[Dovecot] dsync and pop3 migration plugin fails for large inbox due to idle timeout
by Nikolai Schupbach 08 Aug '12

08 Aug '12

Timo, There is a problem with the dsync POP3 migration plugin when syncing a large INBOX. What happens is dsync establishes a connection to the POP3 server at the beginning of the sync, but then it sits there idle until it's used to sync the UIDLs. On a very large inbox with many thousands of messages it will be idle for longer than a POP3 server's idle timeout setting. When the UIDL sync occurs dsync produces the following errors (because the connection has been lost due to the POP3 server's inactivity timeout): dsync(first.last(a)test.co.nz): Error: pop3c(pop3.test.com): Server disconnected unexpectedly dsync(first.last(a)test.co.nz): Error: pop3_migration: Failed to get header for msg 13: Disconnected dsync(first.last(a)test.co.nz): Error: pop3_migration: Failed to get header for msg 14: Disconnected dsync(first.last(a)test.co.nz): Error: pop3_migration: Failed to get header for msg 15: Disconnected dsync(first.last(a)test.co.nz): Error: pop3_migration: Failed to get header for msg 16: Disconnected ... dsync(first.last(a)test.co.nz): Error: pop3_migration: Failed to get header for msg 14492: Disconnected dsync(first.last(a)test.co.nz): Error: pop3_migration: Failed to get header for msg 14493: Disconnected dsync(first.last(a)test.co.nz): Error: pop3_migration: Failed to get header for msg 14494: Disconnected Also at the end of the dsync it actually has an exit status of 0, but it shouldn't because the POP3 sync failed, and none of the UIDLs are retained. Dsync should try to keep the POP3 connection alive, by sending a regular 'NOOP' command to the POP3 server, or it should simply reconnect if sees the connection is lost. At the moment the only work around is to increase the POP3 server's idle timeout to a multi hour value, which isn't a good work around as it causes a lot of inactive POP sessions to bank up. Regards, Nikolai.

2 3

Re: [Dovecot] sieve vacation messages trouble
by asier.cidon＠externo.uam.es 08 Aug '12

08 Aug '12

The problem is solved!!!! In the library "src/lib-sieve/plugins/vacation/cmd-vacation.c", in the package "dovecot-sieve" or "dovecot-pigeonhole" modify: smtp_handle = sieve_smtp_open(senv, reply_to, NULL, &f); smtp_handle = sieve_smtp_open(senv, reply_to, reply_from, &f); You can check the correct operation in your logs. /var/log/maillog postfix/smtpd[27112]: connect from smtp.mydomain.com postfix/smtpd[27112]: A95D2168456: client=smtp.mydomain.com postfix/cleanup[27114]: A95D2168456: message-id=<A5BBC98AAF65424CADBFB6ACF0003E8B03FB4B74(a)example.com> postfix/smtpd[27112]: disconnect from smtp.mydomain.com postfix/qmgr[17010]: A95D2168456: from=<asier.cidon(a)example.com>, size=7274, nrcpt=1 (queue active) postfix/pipe[27115]: A95D2168456: to=<asier.cidon(a)mydomain.com>, relay=dovecot, delay=0.09, delays=0.01/0/0/0.08, dsn=2.0.0, status=sent (delivered via dovecot service) postfix/qmgr[17010]: A95D2168456: removed /var/log/dovecot.log dovecot: auth(default): master out: USER 1 asier.cidon(a)mydomain.com uid=xxx gid=xxx quota_rule=*:bytes=524288000 home=/buzon/asier.cidon dovecot: deliver(asier.cidon(a)mydomain.com): sieve: msgid=<A5BBC98AAF65424CADBFB6ACF0003E8B03FB4B74(a)example.com>: sent vacation response to <asier.cidon(a)example.com> dovecot: deliver(asier.cidon(a)mydomain.com): sieve: msgid=<A5BBC98AAF65424CADBFB6ACF0003E8B03FB4B74(a)example.com>: stored mail into mailbox 'INBOX' /var/log/maillog postfix/pickup[17009]: B221D168458: uid=xxx from=<asier.cidon(a)mydomain.com> postfix/cleanup[27114]: B221D168458: message-id=<dovecot-sieve-1344420404-703760-0(a)mda.mydomain.com> postfix/qmgr[17010]: B221D168458: from=<asier.cidon(a)mydomain.com>, size=661, nrcpt=1 (queue active) postfix/smtp[27195]: B221D168458: to=<asier.cidon(a)example.com>, relay=smtpinterno.mydomain.com, delay=0.04, delays=0.01/0/0.01/0.01, dsn=2.0.0, status=sent (250 2.0.0 Ok: queued as A3A092280B3) postfix/qmgr[17010]: B221D168458: removed

2 1

[Dovecot] doveadm import is always verbose
by Jürgen Obermann 08 Aug '12

08 Aug '12

Hello, with dovecot versions up to 2.1.9, when I use: doveadm import -u guser mbox:/tmp/mbox/guser/restore_2012-05-08 restore_2012-05-08 all it always sends out info messages for every mail copied like that: doveadm(guser): Info: copy from mymail: box=restore_2012-05-08/mymail, uid=5, msgid=<######>, size=6999462 I had expected to see these info messages only if I add the verbose option to doveadm. And using the option -v with: doveadm -v import -u guser mbox:/tmp/mbox/guser/restore_2012-05-08 restore_2012-05-08 all makes no difference at all, the same messages appear. The verbose option seems to be always on. Is this a bug or intended behaviour? Greetings, Jürgen -- Jürgen Obermann Hochschulrechenzentrum der Justus-Liebig-Universität Gießen Heinrich-Buff-Ring 44 Tel. 0641-9913054

2 1

[Dovecot] Dovecot with Company - level Quota
by Kavish Karkera 08 Aug '12

08 Aug '12

Hi Timo, We are using maildir as quota-backend , and performing user level quota, which is working fine. (using dovecot 2.x ). Now the requirement is to , restrict the quota to client / company level along with user level quota. For. eg. We have a mailbox path like /mail/mailstore/10001/kavish.karkera(a)linoquery.com/Maildir/ where 10001 is Client code (unique number given to very client) instead of domain name. So there would be two quota's one at company level and other user level. Such as 10001(linoquery.com) = 5GB ---> Company Quota kavish.karkera(a)linoquery.com = 0 ? ---> User Quota If the sum of the user quota under 10001/* exceeds the 5GB limit then the mails for that particular domain should get bounced. Please Help , if this is possible. Regards, Kavish Karkera

2 1

[Dovecot] replication chain
by Костырев Александр Алексеевич 08 Aug '12

08 Aug '12

good day! I wonder if it is possible to make a chain of replication in dovecot 2.1.9. Now I'm using two way replication(I use proxy to redirect users) and it's working just fine but is it possible to setup replication like this: serverA ---> serverB --> server C <--- I've added additional mail_replica2 on serverB and after restart dovecot didn't complain about errors, with doveconf -n I am able to see two replica's settings but user's mails aren't replicating to server C. no errors in logs. I want to use server C as backup server with lvm snapshots.

2 1

[Dovecot] error message. Some help please
by Spyros Tsiolis 08 Aug '12

08 Aug '12

Hello all : dovecot -n : # 1.2.16: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.17.4.el5 i686 CentOS release 5.5 (Final) ext3 base_dir: /var/run/dovecot/ log_path: /var/log/dovecot/dovecot.log info_log_path: /var/log/dovecot/dovecot-info.log ssl_parameters_regenerate: 48 verbose_ssl: yes login_dir: /var/run/dovecot//login login_executable: /usr/local/dovecot/libexec/dovecot/imap-login login_greeting: * Dovecot ready * login_max_processes_count: 64 mail_location: maildir:/var/MailRoot/domains/%d/%n/Maildir mail_plugins: zlib auth default: verbose: yes debug: yes debug_passwords: yes passdb: driver: passwd-file args: /etc/dovecot/passwd passdb: driver: pam userdb: driver: static args: uid=vmail gid=vmail home=/home/vmail/%u userdb: driver: passwd From the logs : tail -100 /var/log/dovecot/dovecot | more : ......... Jul 06 13:51:20 dovecot: Warning: All login processes are in use. You may need to increase login_max_processes_count Jul 18 15:20:32 dovecot: Warning: All login processes are in use. You may need to increase login_max_processes_count Jul 19 09:16:40 dovecot: Warning: Killed with signal 15 (by pid=3062 uid=0 code=kill) ......... Should I just go ahead and increase login_max_processes_count ? Is it that simple ? Just asking for your feedback and experience chaps. Thank you in advance, Spyros ---- "I merely function as a channel that filters music through the chaos of noise" - Vangelis

2 1

Re: [Dovecot] connectionlimit for pop3s?
by Joseph Tam 08 Aug '12

08 Aug '12

On Tue, 7 Aug 2012, dovecot-request(a)dovecot.org wrote: > When switching to port 995 to use pop3s he is limited at connection > count. Some people can reach pop3s-server successful, some getting a > timeout. > ... > Somebody knows some typical clientside problems when this problem > occurs? Do the same user(s) have this problem and/or do each user have their own mail configuration for their mail readers? If yes, I would also check that the port and security protocol matches (i.e. clear/TLS/SSL on ports 110/110/995 respectively). Mismatched configurations could cause what you describe. Log messages could also be helpful here. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] how to duplicate users emails to allow deleted recovery?
by Voytek Eymont 08 Aug '12

08 Aug '12

I have a situation where a user deleted emails using iphone, then, wants he sees messages are gone from desktop client, wants them recovered from server, happened several times now is there a way to have all deletes to go to server trash for potential recovery ? off topic: is there a way on iphone to force deletions to server's trash is there a way to have dovecot duplicate all emails to say user_backup(a)dom.tld mail box ? or should I duplicate emails in postfix ? using dovecot 2 with lmpt and virtual domains thanks -- Voytek

1 0

Re: [Dovecot] redirect actions exceeds policy limit
by Mike Greene 07 Aug '12

07 Aug '12

Thank you David, I saw that in the share/docs but we didn't have the /conf.d/ folder or any of the extra conf files in place. I created that directory, copied the file over, made my changes and all is well again. Not sure why things were setup the way they were, after looking at the other files in conf.d it would appear the previous sysadmin had merged a lot of those bits and pieces into the main dovecot.conf file. Perhaps leftovers from v1.x days. Will likely address that down the road when we update that server. Mike Greene Rock Island Technology Solutions, Inc. San Juan Islands, WA. 360-378-5884 x201 > -----Original Message----- > > Date: Mon, 06 Aug 2012 14:46:22 -0400 > From: David Webmailbeta Warden <warden(a)geneseo.edu> > To: <dovecot(a)dovecot.org> > Subject: Re: [Dovecot] redirect actions exceeds policy limit > Message-ID: <f3f600e6dc1974de9bb54da5c4fed10a(a)geneseo.edu> > Content-Type: text/plain; charset="utf-8" > > > > In conf.d/90-sieve.conf we have: > > # The maximum number of redirect > actions that can be performed during > # a single script execution. > > #sieve_max_redirects = 4 > sieve_max_redirects = 25 > > I think that's the > setting you're looking for. > > -David Warden

1 0

[Dovecot] sieve vacation messages trouble
by asier.cidon＠externo.uam.es 07 Aug '12

07 Aug '12

FROM:mailman-bounces@dovecot.org DATE:27. heinäkuuta 2012 16.58.35 UTC+3.00 TO:dovecot-owner@dovecot.org SUBJECT:CONTENT FILTERED MESSAGE NOTIFICATION The attached message matched the dovecot mailing list's content filtering rules and was prevented from being forwarded on to the list membership. You are receiving the only remaining copy of the discarded message. FROM:Asier Cidon Periañez <asier.cidon(a)externo.uam.es> DATE:27. heinäkuuta 2012 16.01.59 UTC+3.00 TO:dovecot@dovecot.org SUBJECT:RE: [DOVECOT] SIEVE VACATION MESSAGES TROUBLE Hi, I have a problem when I define a Filter SIEVE vacation with Horde, Qmail and Dovecot. When I sent the message vacation for domains external, the log of postfix show <"<>"@mymachine>. I am writing you because I saw the post http://www.dovecot.org/list/dovecot/2009-June/040811.html Can you explain me whqt is the solution? Many Thanks.

3 2

[Dovecot] Pigeonhole sieve include namespace regression
by Daniel Piddock 07 Aug '12

07 Aug '12

Hi, We've recently upgraded from Dovecot 1.2.15 with Sieve 0.1.18 (Debian Squeeze) to Dovecot 2.1.8 and Pigeonhole 0.3.1. We provide a selection of global sieve scripts to make users' lives easier and one noticed that some of these have stopped working. I tracked it down to them having personal scripts with the same name. Using a really simple sieve script: require "include"; include :personal "svn"; include :global "svn"; sievec debug output for sieve 0.1.18 (trimmed a bit): * Required extensions: 0: include (16) 1: fileinto (5) * Included personal script 'svn' (block: 3): [script code here] * Included global script 'svn' (block: 4): [script code here] * Main program (block: 1): 00000000: EXTENSIONS [1]: 00000001: include 00000002: INCLUDE: 00000004: script: svn.sieve [ID: 1, BLOCK: 3] 00000006: INCLUDE: 00000008: script: svn.sieve [ID: 2, BLOCK: 4] 0000000a: [End of code] sievec debug output for Pigeonhole 0.3.1: * Required extensions (block: 1): 0: include (id: 16; block: 4) 1: fileinto (id: 5) * Included personal script 'svn' (block: 5): [script code here] * Main program (block: 2): Address Line Code 00000000: DEBUG BLOCK: 3 00000001: EXTENSIONS [1]: 00000002: include 00000003: 2: INCLUDE: 00000005: script: `svn' from /home/notroot/sieve/svn.sieve [ID: 1, BLOCK: 5] 00000007: 3: INCLUDE: 00000009: script: `svn' from /home/notroot/sieve/svn.sieve [ID: 1, BLOCK: 5] 0000000b: 3: [End of code] As can be seen the personal script is included twice. Obvious work around is to rename the personal script. However it'd be nice if namespacing came back. Cheers, Dan -- Daniel Piddock, Systems Administrator, CoreFiling Limited http://www.corefiling.com

2 2

[Dovecot] connectionlimit for pop3s?
by Hajo Locke 07 Aug '12

07 Aug '12

Hello, i have a user who is able to do pop3 on port 110 without problems and without limits. There are ~10 real users using same public IP. When switching to port 995 to use pop3s he is limited at connection count. Some people can reach pop3s-server successful, some getting a timeout. I cant find any errors or limits within my config or in my log, there are no differences between using plain text and using tls. Are there some special loglines to grep for at this situation? Maybe i missed some lines... At the moment i dont see server-side problems. Somebody knows some typical clientside problems when this problem occurs? dovecot version is 1.2.11 Thanks, Hajo

2 1

[Dovecot] LDAP auth with AD
by Chris Visser 07 Aug '12

07 Aug '12

Hi, I'm struggling to setup LDAP authentication with dovecot against an AD server. When I attempt to bind using the same DN I use to do address lookups in exim and to do searches using ldap search on the command line I get the following in my logs: Aug 7 08:55:58 mail-dev dovecot: auth: Debug: Loading modules from directory: /usr/lib64/dovecot/auth Aug 7 08:55:58 mail-dev dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libauthdb_ldap.so Aug 7 08:55:58 mail-dev dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_sqlite.so Aug 7 08:55:58 mail-dev dovecot: auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libmech_gssapi.so Aug 7 08:55:58 mail-dev dovecot: auth: Debug: auth client connected (pid=1523) Aug 7 08:55:58 mail-dev dovecot: auth: Error: LDAP: binding failed (dn CN=Linux Sync,CN=Users,DC=RTT,DC=co,DC=za): Invalid credentials, 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1 I'm running CentOS 6 and connect to a Windows 2008 R2 domain. The output from dovecot -n: # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-279.2.1.el6.x86_64 x86_64 CentOS release 6.3 (Final) auth_debug = yes auth_verbose = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mbox_write_locks = fcntl passdb { driver = pam } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } userdb { args = uid=exim gid=exim home=/var/spool/mail/%Ld/%Ln driver = static } And my /etc/dovecot/dovecot-ldap.conf.ext: hosts = dc01.mydomain.com base = dc=mydomain,dc=com dn = CN=Linux Sync,CN=Users,DC=mydomain,DC=com dnpass = mypass deref = never scope = subtree ldap_version = 3 auth_bind = no pass_filter = (&(objectClass=person)(mail=%u)) Chris Visser Linux/Network Infrastructure ================== Please read our Email Disclaimer : http://www.rtt.co.za/disclaimer.html

1 0

[Dovecot] redirect actions exceeds policy limit
by Mike Greene 06 Aug '12

06 Aug '12

Hello, We have a vacation/mail forwarder plugin in squirrel mail that allows customers to forward email. It has come to my attention that there is a limit (appears to be 5) on the number of addresses that can be specified. I'm now trying to track down where this policy limit is set. This is the error we see in the customers .dovecot.sieve.log file: main_script: line 26: error: number of redirect actions exceeds policy limit. sieve: info: started log at Jul 25 07:02:54. I checked the following for possible settings: /usr/local/etc/dovecot/dovecot.conf /usr/local/etc/sieve/dovecot.sieve /usr/local/etc/sieve/global.sieve I didn't see anything specific to limiting the number of redirects. I'm wondering where else I can look to find where this limit is coming from and adjust it upwards. We are using the following dovecot / pigeonhole versions. dovecot-2.0.7 dovecot-pigeonhole-0.2.1 athena# dovecot -n # 2.0.7: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.1-RELEASE amd64 auth_default_realm = rockisland.com auth_mechanisms = plain login cram-md5 auth_username_format = %Lu disable_plaintext_auth = no dotlock_use_excl = yes first_valid_gid = 1000 first_valid_uid = 1000 listen = * mail_location = mbox:~/mail:INBOX=/var/mail/%u mail_privileged_group = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf driver = ldap } plugin { quota = maildir quota_rule = *:storage=2G quota_warning = storage=90%% /usr/local/sbin/quota-warning.sh 90 quota_warning2 = storage=80%% /usr/local/sbin/quota-warning.sh 80 sieve = ~/.dovecot.sieve sieve_dir = ~/ sieve_global_dir = /usr/local/etc/sieve/ } protocols = imap pop3 service auth { unix_listener auth-client { mode = 0660 } unix_listener auth-master { group = vmail mode = 0600 user = vmail } unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } user = root } service imap-login { service_count = 0 } service pop3-login { service_count = 0 } ssl_cert = </usr/local/etc/ssl/star.rockisland.com.crt.pem ssl_key = </usr/local/etc/ssl/star.rockisland.com.key.pem userdb { driver = prefetch } userdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf driver = ldap } verbose_proctitle = yes protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep mail_plugins = quota imap_quota } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } protocol lda { auth_socket_path = /var/run/dovecot/auth-master info_log_path = lda_mailbox_autocreate = no lda_mailbox_autosubscribe = yes log_path = mail_plugins = quota sieve postmaster_address = postmaster(a)rockisland.com sendmail_path = /usr/sbin/sendmail } Mike Greene Rock Island Technology Solutions, Inc. San Juan Islands, WA. 360-378-5884 x201

2 1

[Dovecot] find virtual users
by Rafael Nathan 06 Aug '12

06 Aug '12

Hi, Can sendmail find virtual users in /etc/dovecot/passwd ? If yes, what are the necesary changes I have to make ? Urgent help needed. Thanks in advance. Regards, Rafael

3 2

[Dovecot] Just trying to make dovecot work.
by Peter Snow 06 Aug '12

06 Aug '12

Hi, I have to say that Dovecot is certainly the most challenging piece of software I've ever had the pleasure of setting up (due mainly to the reams of largely unhelpful documentation). After 36 almost non-stop hours reading and trying, I finally end up here. :-) I really would appreciate your help - and many thanks in advance! *************************************************************** /var/log/dovecot.info.log (showing unsuccessful login) *************************************************************** Aug 04 21:32:36 auth: Debug: Loading modules from directory: /usr/lib64/dovecot/auth Aug 04 21:32:36 auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libauthdb_ldap.so Aug 04 21:32:36 auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_sqlite.so Aug 04 21:32:36 auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libmech_gssapi.so Aug 04 21:32:36 auth: Debug: passwd-file /usr/local/etc/dovecot.passdb: Read 1 users Aug 04 21:32:36 auth: Debug: auth client connected (pid=24769) Aug 04 21:32:41 auth: Debug: client in: AUTH 1 PLAIN service=imap securedlip=::1 rip=::1 lport=143 rport=52551 resp=AHBldGVyAGZ1YXNpbjU0MTRz Aug 04 21:32:41 auth: Debug: passwd-file(peter,::1): lookup: user=peter file=/usr/local/etc/dovecot.passdb Aug 04 21:32:41 auth: Debug: client out: OK 1 user=peter Aug 04 21:32:41 auth: Debug: master in: REQUEST 1417805825 24769 1 44a3aec60ec6eaec6eff0efb99971eee Aug 04 21:32:41 auth: Debug: master out: USER 1417805825 peter Aug 04 21:32:41 imap-login: Info: Login: user=<peter>, method=PLAIN, rip=::1, lip=::1, mpid=24772, secured *************************************************************** END *************************************************************** *************************************************************** /var/log/dovecot.log (showing unsuccessful login) *************************************************************** Aug 04 21:32:41 IMAP(peter): Error: user peter: Couldn't drop privileges: User is missing UID (see mail_uid setting) Aug 04 21:32:41 IMAP(peter): Error: Internal error occurred. Refer to server log for more information. *************************************************************** END *************************************************************** *************************************************************** dovecot -n *************************************************************** # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-279.2.1.el6.x86_64 x86_64 CentOS release 6.3 (Final) ext4 auth_debug = yes auth_debug_passwords = yes auth_verbose = yes disable_plaintext_auth = no first_valid_uid = 1000 info_log_path = /var/log/dovecot.info.log last_valid_uid = 5000 log_path = /var/log/dovecot.log login_trusted_networks = 127.0.0.1 mail_debug = yes mail_location = maildir:/var/mail/%u/Maildir mail_log_prefix = "%Us(%u): " passdb { args = /usr/local/etc/dovecot.passdb driver = passwd-file } protocols = imap ssl = no verbose_proctitle = yes *************************************************************** END *************************************************************** *************************************************************** /usr/local/etc/dovecot.passdb *************************************************************** peter:{CRYPT}BrtgyyOEX33w6:1000:500:Peter Snow:/var/mail/peter:: *************************************************************** END *************************************************************** *************************************************************** cat /etc/passwd | grep peter *************************************************************** peter:x:1000:500::/home/peter:/sbin/nologin *************************************************************** END *************************************************************** Notes: 'peter' does not yet have a system password, since I'm testing this for users which will only be virtual users. I made the password for 'peter' in the dovecot.passdb using "doveadm pw -s crypt" although once I've got it working I'd like to change the encryption to something as strong as possible - any suggestions please? Hope you can help and many thanks. Kind regards, Peter

4 6

Re: [Dovecot] getting rid of old spam from +spam Maildir ?
by Joseph Tam 06 Aug '12

06 Aug '12

Charles Marcus <CMarcus(a)Media-Brokers.com> writes: > On 2012-08-03 6:33 PM, Voytek Eymont <voytek(a)sbt.net.au> wrote: >> don't know, looking this morning it shows like below, the 00:05:05 is >> probably last time I did 'ls'? I was doing 'ls' or web mail refresh, to >> see what gets removed from 'spam' box, before and after each attempt to >> expunge : >> >> date.saved: 2012-08-03 00:05:05 > > The 'date.saved:' is the date/time that the message was moved into that > folder. Perhaps this related thread starting at http://dovecot.org/list/dovecot/2012-July/067199.html and ending with the patch by Timo http://dovecot.org/list/dovecot/2012-July/067423.html may be of interest to the OP. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] getting rid of old spam from +spam Maildir ?
by Voytek Eymont 06 Aug '12

06 Aug '12

I'm trying to setup per user '+spam' delivery from amavis tags, so that each user gets any mails tagged as spam to 'spam' Maildir via +spam Dovecot lmtp delivery. after say 7 days I want to delete all spams older than 7 days, if I simply delete mail files from the file system, is that a 'bad thing' ? what is a proper way to do that, and scripts ? for removing/archiving old uncollected emails in main INBOX I use archivemail from sf, but, don't think I can do subfoldrs with archivemail any pointers (and scripts) welcomed, thanks -- Voytek

6 19

[Dovecot] ot: mysql auth worker failure ?
by Voytek Eymont 05 Aug '12

05 Aug '12

looking through logs I noticed this today: grep mysql /var/log/maillog | grep fail Aug 3 17:35:25 dovecot: auth-worker(28335): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist Aug 3 17:35:57 dovecot: auth-worker(28335): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist Aug 3 17:36:02 dovecot: auth-worker(28335): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist Aug 3 17:36:23 dovecot: auth-worker(28335): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist Aug 3 17:36:40 dovecot: auth-worker(28335): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist Aug 3 17:36:50 dovecot: auth-worker(28335): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist Aug 3 17:40:04 dovecot: auth-worker(28335): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist Aug 3 17:41:04 dovecot: auth-worker(29721): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist Aug 3 17:41:19 dovecot: auth-worker(29721): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist Aug 3 17:41:38 dovecot: auth-worker(29721): Error: mysql: Query failed, retrying: Table 'postfix.users' doesn't exist looking at mysqld.log, all i see is: 120721 17:58:44 InnoDB: Shutdown completed; log sequence number 0 76814 120721 17:58:44 [Note] /usr/libexec/mysqld: Shutdown complete 120721 17:58:44 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended 120721 17:59:53 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql 120721 17:59:54 InnoDB: Initializing buffer pool, size = 8.0M 120721 17:59:54 InnoDB: Completed initialization of buffer pool 120721 17:59:54 InnoDB: Started; log sequence number 0 76814 120721 17:59:54 [Note] Event Scheduler: Loaded 0 events 120721 17:59:54 [Note] /usr/libexec/mysqld: ready for connections. Version: '5.1.61' socket: '/var/lib/mysql/mysql.sock' port: 3306 Source distribution no failure were noticed or reported, except for log items any thoughts ? I might have been importing (phpmyadmin) some 3 or 4 databases around that time, surely that wouldn't cause such issue ? -- Voytek Eymont

4 6

[Dovecot] disable auth-worker logging
by Gmail-teopro 04 Aug '12

04 Aug '12

Hello all, Can someone please give me a hint about how can I disable such messages to be inserted into log file(maillog this case as syslog_facility = mail)? >> dovecot: auth-worker(13377): mysql(localhost): Connected to database postfix All the '_debug' and '_verbose' statements bear the 'no' value. Thank you. -- Best regards, Gmail-teopro mailto:teopro@gmail.com

2 1

[Dovecot] authenticate plain and utf-8 with special chars
by Matthias Lay 04 Aug '12

04 Aug '12

Hi, I experienced some problems with authenticate. seems like the mail clients like thunderbird send their base64 string in ISO- encoding, which doesnt work on my dovecot setup if there are some Umlauts I am not able to login as "ömer" for example If I authenticate from telnet with an base64 encoded utf-8 string like 'echo -en "\0ömer\0Start12" |base64' everything works fine -dovecot 2.1.7 -userdb is an openldap which queries an windows AD so results are in utf8, I think. any clues at which point to fix this are welcome ;)

2 1

[Dovecot] zlib plugin maildir broken ?/ Cached message size smaller than expected
by Robert Schetterer 03 Aug '12

03 Aug '12

Hi Timo, by having errors like Cached message size smaller than expected and Maildir filename has wrong S value and Corrupted index cache file in dove 2.1.8 i can reproduce the problem with tb 14 with 2 nat machines connected to the same server the problem relates with create new folder then copy some uncompressed and compressed mail to it, the i.e open it by other client sometime this happens at once , sometime after a few copy actions however thunderbird ,then errors above apear, sometimes no mail is shown, sometimes only uncompressed or only compressed so funktion read both formats gets lost somehow any idea, you need a better debug ? -- Best Regards MfG Robert Schetterer

2 13

[Dovecot] Overriding inbox= in userdb extra fields
by Bret Martin 03 Aug '12

03 Aug '12

Hello, I'm trying to set up an alternate user with a different inbox using passwd-file and userdb extra fields and the extra field settings don't seem to be taking effect. I've used auth_debug and mail_debug and I'm unclear how I can further troubleshoot this. Is it possible to have inbox=yes in one namespace globally and then override this for one user by setting inbox=no for that namespace and then inbox=yes for another? My doveconf -n is below. I would like to have inbox=yes for the inbox namespace, inbox=no for the virtual namespace, and then be able to invert these for selected users using userdb extra fields. My attempt at doing this so far looks like bam-ios:[REDACTED]:500:500::/home/bam::user=bam namespace/inbox/inbox=no namespace/virtual/inbox=yes Changing the user with user= seems to work fine, but the inbox= changes don't. Here is some relevant log data. Aug 2 11:37:29 new-miranda dovecot: auth: Debug: Loading modules from directory: /usr/lib/dovecot/modules/auth Aug 2 11:37:29 new-miranda dovecot: auth: Debug: passwd-file /etc/dovecot/users: Read 1 users in 0 secs Aug 2 11:37:29 new-miranda dovecot: auth: Debug: auth client connected (pid=14967) Aug 2 11:37:29 new-miranda dovecot: auth: Debug: client in: AUTH#0111#011PLAIN#011service=imap#011secured#011session=Rgx2MErG4wBAd51y#011lip=216.93.241.245#011rip=64.119.157.114#011lport=993#011rport=38115#011resp=<hidden> Aug 2 11:37:29 new-miranda dovecot: auth: Debug: passwd-file(bam-ios,64.119.157.114,<Rgx2MErG4wBAd51y>): lookup: user=bam-ios file=/etc/dovecot/users Aug 2 11:37:29 new-miranda dovecot: auth: Debug: auth(bam-ios,64.119.157.114,<Rgx2MErG4wBAd51y>): username changed bam-ios -> bam Aug 2 11:37:29 new-miranda dovecot: auth: Debug: client out: OK#0111#011user=bam#011namespace/inbox/inbox=no#011namespace/virtual/inbox=yes Aug 2 11:37:29 new-miranda dovecot: auth: Debug: master in: REQUEST#[REDACTED] Aug 2 11:37:29 new-miranda dovecot: auth: Debug: passwd-file(bam,64.119.157.114,<Rgx2MErG4wBAd51y>): lookup: user=bam file=/etc/dovecot/users Aug 2 11:37:29 new-miranda dovecot: auth: passwd-file(bam,64.119.157.114,<Rgx2MErG4wBAd51y>): unknown user Aug 2 11:37:29 new-miranda dovecot: auth: Debug: passwd(bam,64.119.157.114,<Rgx2MErG4wBAd51y>): lookup Aug 2 11:37:29 new-miranda dovecot: auth: Debug: master out: USER#0111425670145#011bam#011system_groups_user=bam#011uid=500#011gid=500#011home=/home/bam Aug 2 11:37:29 new-miranda dovecot: imap-login: Login: user=<bam>, method=PLAIN, rip=64.119.157.114, lip=216.93.241.245, mpid=14970, TLS, session=<Rgx2MErG4wBAd51y> Aug 2 11:37:29 new-miranda dovecot: imap: Debug: Loading modules from directory: /usr/lib/dovecot/modules Aug 2 11:37:29 new-miranda dovecot: imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib20_virtual_plugin.so Aug 2 11:37:29 new-miranda dovecot: imap(bam): Debug: Effective uid=500, gid=500, home=/home/bam Aug 2 11:37:29 new-miranda dovecot: imap(bam): Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=mdbox:/srv/mail/bam/mdbox Aug 2 11:37:29 new-miranda dovecot: imap(bam): Debug: fs: root=/srv/mail/bam/mdbox, index=, control=, inbox=, alt= Aug 2 11:37:29 new-miranda dovecot: imap(bam): Debug: Namespace : Using permissions from /srv/mail/bam/mdbox: mode=0700 gid=-1 Aug 2 11:37:29 new-miranda dovecot: imap(bam): Debug: Namespace virtual: type=private, prefix=virtual/, sep=/, inbox=no, hidden=yes, list=no, subscriptions=yes location=virtual:/srv/mail/bam/virtual Aug 2 11:37:29 new-miranda dovecot: imap(bam): Debug: fs: root=/srv/mail/bam/virtual, index=, control=, inbox=, alt= Aug 2 11:37:29 new-miranda dovecot: imap(bam): Debug: Namespace mdbox: type=private, prefix=mdbox/, sep=/, inbox=no, hidden=yes, list=no, subscriptions=yes location=mdbox:/srv/mail/bam/mdbox Aug 2 11:37:29 new-miranda dovecot: imap(bam): Debug: fs: root=/srv/mail/bam/mdbox, index=, control=, inbox=, alt= I also tried not having inbox=yes anywhere in the global configurations, but then I get Aug 2 11:52:22 new-miranda dovecot: imap(bam): Error: user bam: Initialization failed: namespace configuration error: inbox=yes namespace missing I'm having great luck with the virtual plugin, but I only want to use it for the inbox on some clients. Any ideas on why my inbox=yes/no overrides aren't taking effect? Thanks, --Bret # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.5 ext4 mail_location = mdbox:/srv/mail/%u/mdbox mail_plugins = " virtual" namespace inbox { inbox = no location = prefix = } namespace mdbox { hidden = yes list = no location = prefix = mdbox/ separator = / } namespace virtual { hidden = yes inbox = yes list = no location = virtual:/srv/mail/%u/virtual prefix = virtual/ separator = / } passdb { args = scheme=SSHA512 username_format=%u /etc/dovecot/users driver = passwd-file } passdb { driver = pam } protocols = " imap" service imap-login { inet_listener imap { port = 0 } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } userdb { driver = passwd }

2 2

[Dovecot] v2.1.9 released
by Timo Sirainen 03 Aug '12

03 Aug '12

http://dovecot.org/releases/2.1/dovecot-2.1.9.tar.gz http://dovecot.org/releases/2.1/dovecot-2.1.9.tar.gz.sig I've again mostly finished reading and answering most of the mails in Dovecot mailing list. There are a couple annoyingly difficult / time consuming bugreport mails that I haven't replied to yet, but if anyone thinks I should have replied to something already feel free to resend the mail. For the new Redis/memcached dict stuff see http://master.wiki2.dovecot.org/AuthDatabase/Dict and http://master.wiki2.dovecot.org/Quota/Dict I'm thinking about removing the new quota_ignore_save_errors=yes setting in v2.2 and just forcing it enabled always. Thoughts? (I didn't want to change v2.1 behavior by doing this.) The most important changes since v2.1.8: * mail-log plugin: Log mailbox names with UTF-8 everywhere (instead of mUTF-7 in some places and UTF-8 in other places) * director: Changed director_username_hash setting's default from %u to %Lu (= lowercase usernames). This doesn't break any existing installations, but might fix some of them. + doveadm: Added "auth cache flush [<username>]" command. + Implemented dict passdb/userdb + Implemented Redis and memcached dict backends, which can be used as auth backends. Redis can also be used as dict-quota backend. + Added plugin { quota_ignore_save_errors=yes } setting to allow saving a mail when quota lookup fails with temporary failure. - Full text search indexing might have failed for some messages, always causing indexer-worker process to run out of memory. - fts-lucene: Fixed handling SEARCH HEADER FROM/TO/SUBJECT/CC/BCC when the header wasn't lowercased. - fts-squat: Fixed crash when searching a virtual mailbox. - pop3: Fixed assert crash when doing UIDL on empty mailbox on some setups. - auth: GSSAPI RFC compliancy and error handling fixes. - Various fixes related to handling shared namespaces

3 4

[Dovecot] Antispam only when LMTP delivers some specific messages
by Sandro Tosi 03 Aug '12

03 Aug '12

Hello, we're setting up a weird platform where every incoming email is passed from the MTA directly to a tool that then uses dovecot LMTP to deliver the message into the user mailbox. We are legally *not* allowed to run antispam on all the incoming messages, but only on some of them, as they are recognized by the aforementioned tool; but given that tool directly uses LMTP to delivers the mail we need to find a way to parse the messages passing thru LMTP and run spamassassin only on those matching some regex on subject and mail body. Is is possible to do that with some dovecot LMTP feature? i've read a lot of documentation about how to possibly implement it and it *seems* there would be a way using pigeonhole sieve and extprograms - what do you think? The idea I have in mind is something like: 1. identify the mails we want to scan with spamassassin (using regex or whatever else to precisely pin-point them) 2. run SA on those 3. in case it's spam, rewrite the subject (or similar) Do you think it's something doable with dovecot? Thanks in advance, -- Sandro Tosi Product Engineer Shared Hosting Products R&D | Dada.pro eml sandro.tosi(a)register.it

3 3

[Dovecot] dovecot-lda setting quota rules
by Lazy 03 Aug '12

03 Aug '12

Hi, in my setup dovecot-lda reads user and home from environment, and dosn't perform userdb lookup Jul 18 03:09:47 thebe2 dovecot: lda(lazytest_test): Debug: Effective uid=300, gid=300, home=/vmail/la/lazytest_test Jul 18 03:09:47 thebe2 dovecot: lda(lazytest_test): Debug: Quota root: name=User quota backend=maildir args= Jul 18 03:09:47 thebe2 dovecot: lda(lazytest_test): Debug: Quota warning: bytes=0 (95%) messages=0 reverse=no command=quota-warning 95 lazytest_test Jul 18 03:09:47 thebe2 dovecot: lda(lazytest_test): Debug: Quota warning: bytes=0 (80%) messages=0 reverse=no command=quota-warning 80 lazytest_test Jul 18 03:09:47 thebe2 dovecot: lda(lazytest_test): Debug: Namespace inbox: type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes l ocation=maildir:~/Maildir:INDEX=/var/dovecot_indexes/vmail/la/lazytest_test Jul 18 03:09:47 thebe2 dovecot: lda(lazytest_test): Debug: maildir++: root=/vmail/la/lazytest_test/Maildir, index=/var/dovecot_indexes/vmail/la/lazytest_tes t, control=, inbox=/vmail/la/lazytest_test/Maildir, alt= Jul 18 03:09:47 thebe2 dovecot: lda(lazytest_test): Debug: userdb lookup skipped, username taken from USER environment Jul 18 03:09:47 thebe2 dovecot: lda(lazytest_test): Debug: Quota root: name=User quota backend=maildir args= I wan't it to stay that way. The problem is that it dosn't update the quota rules in Maildir when quota is changed in userdb. I have the rules avaiable in qmail-lda's environment, but I need an idea on how to feed the quota rule string to quota plugin without doing userdb lookup. What whould be the best way to do this, maybe in plugins/quota/quota.c:quota_root_add_rules() ? Regards, Michal Grzedzicki

2 4

[Dovecot] managesieve segfault with gold linker
by Eray Aslan 03 Aug '12

03 Aug '12

dovecot-2.1.8 sieve-0.3.1 binutils-2.22 When dovecot and sieve is linked with ld.gold I get a segfault in checkscript command: $ telnet localhost 4190 [some output] authenticate "PLAIN" "<base64_username_password>" [some more output] checkscript "foobarscript" connection closed Logs: 2012-07-12T19:30:23.624158+00:00 bob dovecot: master: Dovecot v2.1.8 starting up 2012-07-12T19:31:22.548913+00:00 bob dovecot: managesieve-login: Login: user=<username>, method=PLAIN, rip=192.168.122.1, lip=192.168.122.64, mpid=12169, session=<YGo2AqfEcwDAqHoB> 2012-07-12T19:31:34.636747+00:00 bob dovecot: managesieve(username): Fatal: master: service(managesieve): child 12169 killed with signal 11 (core dumped) make check also fails (thank you for that): [...] Test case: ./tests/execute/errors.svtest: 1: Test 'Action conflicts: reject <-> fileinto' SUCCEEDED 2: Test 'Action conflicts: reject <-> keep' SUCCEEDED 3: Test 'Action conflicts: reject <-> redirect' SUCCEEDED 4: Test 'Action limit' SUCCEEDED 5: Test 'Redirect limit' SUCCEEDED /tmp/work/dovecot-2.1-pigeonhole-0.3.1/src/testsuite/.libs/lt-testsuite: symbol lookup error: /tmp/work/dovecot-2.1-pigeonhole-0.3.1/src/lib-sieve/.libs/libdovecot-sieve.so.0: undefined symbol: mail_deliver_get_log_var_expand_table make: *** [tests/execute/errors.svtest] Error 127 Backtrace is attached. -- Eray Aslan <eras(a)gentoo.org>

2 4

[Dovecot] LZMA2 (xz) support for Dovecot?
by Brad Smith 02 Aug '12

02 Aug '12

Timo, Thoughts on adding LZMA2 (xz) support via liblzma to Dovecot? -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.

2 1

[Dovecot] imap(xxxxxxxx): Error: opendir(/user/xxxxxxxx/.imap) failed: No such file or directory
by Frank Bonnet 02 Aug '12

02 Aug '12

hello I see this message in the dovecot error log every time a user connect to IMAP service. imap(xxxxxxxx): Error: opendir(/user/xxxxxxxx/.imap) failed: No such file or directory In the server's config I've this mail_location = mbox:%h/:INBOX=/var/mail/%u:INDEX=/var/spool/dovecot/index/%u As we can see INDEX files are not living in user's home directories but in /var/spool/dovecot/index/%u so why this error message ? BTW : users access normally to their IMAP folders , I'm just curious about this message which is not marked as warning but error Thank you

4 14

[Dovecot] Problem with preserving MIME format with Dovecot IMAP and MS Outlook client
by Peter Grimmond 01 Aug '12

01 Aug '12

Hello all, Apologies for the repost, but I am really struggling to solve this problem... I have installed Dovecot 2.0.19 on Ubuntu 12.04 LTS. I have set up a very basic IMAP configuration. I have two different laptops running MS Outlook (one MacOS, one Windows 7) and I have configured both to connect to the Dovecot service. My problem is, emails in MIME format that I synchronise from one MS Outlook client are not being correctly decoded as MIME messages on the other client. Instead, the message is rendered in plaintext, starting with the lines: This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. --B_3426360453_22814Content-type: multipart/alternative; boundary="B_3426360453_4099" --B_3426360453_4099Content-type: text/plain; charset="ISO-8859-1"Content-transfer-encoding: quoted-printable Can anyone help me understand why this might be happening? The output from dovecot -n is: # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-26-generic-pae i686 Ubuntu 12.04 LTS auth_debug = yes auth_verbose = yes disable_plaintext_auth = no mail_location = maildir:~/Maildir passdb { driver = pam } protocols = " imap" ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } Thanks! PG ___ Peter Grimmond

2 1

[Dovecot] Problem with preserving MIME format with Dovecot IMAP and Outlook
by Peter Grimmond 01 Aug '12

01 Aug '12

1 0

[Dovecot] can't recieve emails to inbox
by Rafael Nathan 01 Aug '12

01 Aug '12

Hi, I am unable to send emails to virtual users I created. Here is my output for dovecot -n # 1.0.7: /etc/dovecot.conf log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot-info.log ssl_disable: yes login_dir: /var/run/dovecot/login login_executable(default): /usr/libexec/dovecot/imap-login login_executable(imap): /usr/libexec/dovecot/imap-login login_executable(pop3): /usr/libexec/dovecot/pop3-login mail_location: maildir:~/Maildir mail_executable(default): /usr/libexec/dovecot/imap mail_executable(imap): /usr/libexec/dovecot/imap mail_executable(pop3): /usr/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/lib64/dovecot/imap mail_plugin_dir(imap): /usr/lib64/dovecot/imap mail_plugin_dir(pop3): /usr/lib64/dovecot/pop3 auth default: verbose: yes passdb: driver: passwd-file args: /etc/dovecot/passwd passdb: driver: pam userdb: driver: passwd userdb: driver: static args: uid=vmail gid=vmail home=/home/vmail/%u == Contents of my passwd file located at /etc/dovecot/passwd user1(a)mydomain.com user2(a)mydomain.com I sent an email to user1(a)mydomain.com from gmail.com but can view it anywhere. Please suggest. Where am I going wrong?

2 1

[Dovecot] Erroneous operation not permitted when deleting mailbox with mdbox
by Nikolai Schupbach 01 Aug '12

01 Aug '12

I'm seeing the following error in our logs when removing mailboxes (we are using mdbox and dovecot 2.1.8): Aug 1 20:03:36 msgsrv dovecot: imap(test(a)test.com): Error: stat(/mailstore/domains/test.com/test/mdbox/mailboxes/Spam) failed: Operation not permitted Aug 1 20:03:36 msgsrv dovecot: imap(test(a)test.com): Mailbox deleted: Spam When I run truss against the process it appears the error relates to attempted unlink of a directory, not a stat of it, as reported by the log. However the mailbox does appear to be deleted fine, so it appears to be an erroneous error. Here is the truss output from the "3 DELETE INBOX.Spam" IMAP command: gettimeofday({1343808204.962165 },0x0) = 0 (0x0) gettimeofday({1343808204.962351 },0x0) = 0 (0x0) kevent(9,0x0,0,{0xb,EVFILT_READ,0x0,0,0x15,0x21c17a40},6,{1786.679649000 }) = 1 (0x1) gettimeofday({1343808216.031493 },0x0) = 0 (0x0) gettimeofday({1343808216.031676 },0x0) = 0 (0x0) read(11,"3 DELETE INBOX.Spam\r\n",8179) = 21 (0x15) getpid() = 6293 (0x1895) __sysctl(0x7fffffffd850,0x4,0x0,0x0,0x21c8f000,0x2a) = 0 (0x0) clock_gettime(13,{1343808216.000000000 }) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails",{ mode=drwx------ ,inode=28761,size=3,blksize=131072 }) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails",{ mode=drwx------ ,inode=28761,size=3,blksize=131072 }) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam",{ mode=drwx------ ,inode=28760,size=3,blksize=131072 }) = 0 (0x0) open("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index.log",O_RDWR,037777753160) = 10 (0xa) fstat(10,{ mode=-rw------- ,inode=28762,size=144,blksize=4096 }) = 0 (0x0) pread(0xa,0x21c30000,0x90,0x0,0x1000,0x0) = 144 (0x90) open("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index",O_RDWR,037777731760) ERR#2 'No such file or directory' open("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index.log.2",O_RDWR,037777731520) ERR#2 'No such file or directory' fstat(10,{ mode=-rw------- ,inode=28762,size=144,blksize=4096 }) = 0 (0x0) unlink("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam") ERR#1 'Operation not permitted' stat("/usr/share/nls/C/libc.cat",0x7fffffffd0a0) ERR#2 'No such file or directory' stat("/usr/share/nls/libc/C",0x7fffffffd0a0) ERR#2 'No such file or directory' stat("/usr/local/share/nls/C/libc.cat",0x7fffffffd0a0) ERR#2 'No such file or directory' stat("/usr/local/share/nls/libc/C",0x7fffffffd0a0) ERR#2 'No such file or directory' write(2,"\^A\b6293 prefix=imap(test@test."...,36) = 36 (0x24) write(2,"\^A\^D6293 stat(/mailstore/domai"...,99) = 99 (0x63) access("/etc/localtime",4) = 0 (0x0) open("/etc/localtime",O_RDONLY,04160026530) = 12 (0xc) fstat(12,{ mode=-r--r--r-- ,inode=16454,size=2434,blksize=4096 }) = 0 (0x0) read(12,"TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0"...,41448) = 2434 (0x982) close(12) = 0 (0x0) issetugid(0x20ee7fd1,0x21e72000,0x0,0xa7,0x4e,0xc) = 1 (0x1) open("/usr/share/zoneinfo/posixrules",O_RDONLY,056) = 12 (0xc) fstat(12,{ mode=-r--r--r-- ,inode=545,size=3519,blksize=4096 }) = 0 (0x0) read(12,"TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0"...,41448) = 3519 (0xdbf) close(12) = 0 (0x0) madvise(0x21eba000,0xb000,0x5,0x2b9,0x17,0x1) = 0 (0x0) madvise(0x21e72000,0x5000,0x5,0x271,0x17,0x1) = 0 (0x0) madvise(0x21e63000,0xc000,0x5,0x262,0x7fffffffcbf0,0x7fffffffcbf0) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index.log",{ mode=-rw------- ,inode=28762,size=144,blksize=4096 }) = 0 (0x0) fstat(10,{ mode=-rw------- ,inode=28762,size=144,blksize=4096 }) = 0 (0x0) gettimeofday({1343808216.048607 },0x0) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index.log.2",0x7fffffffd600) ERR#2 'No such file or directory' setitimer(0,{0.000000, 180.000000 },{0.000000, 0.000000 }) = 0 (0x0) fcntl(10,F_SETLKW,0x7fffffffd520) = 0 (0x0) setitimer(0,{0.000000, 0.000000 },{0.000000, 180.000000 }) = 0 (0x0) clock_gettime(13,{1343808216.000000000 }) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index.log",{ mode=-rw------- ,inode=28762,size=144,blksize=4096 }) = 0 (0x0) fstat(10,{ mode=-rw------- ,inode=28762,size=144,blksize=4096 }) = 0 (0x0) pwrite(0xa,0x21c09000,0xc,0x90,0x10ab6b8,0x2) = 12 (0xc) pwrite(0xa,0x7fffffffd69c,0x4,0x90,0x10ab6b8,0x2) = 4 (0x4) clock_gettime(13,{1343808216.000000000 }) = 0 (0x0) fcntl(10,F_SETLK,0x7fffffffd5e0) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index.log",{ mode=-rw------- ,inode=28762,size=156,blksize=4096 }) = 0 (0x0) fstat(10,{ mode=-rw------- ,inode=28762,size=156,blksize=4096 }) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index.log",{ mode=-rw------- ,inode=28762,size=156,blksize=4096 }) = 0 (0x0) fstat(10,{ mode=-rw------- ,inode=28762,size=156,blksize=4096 }) = 0 (0x0) setitimer(0,{0.000000, 180.000000 },{0.000000, 0.000000 }) = 0 (0x0) fcntl(10,F_SETLKW,0x7fffffffd1f0) = 0 (0x0) setitimer(0,{0.000000, 0.000000 },{0.000000, 180.000000 }) = 0 (0x0) clock_gettime(13,{1343808216.000000000 }) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index.log",{ mode=-rw------- ,inode=28762,size=156,blksize=4096 }) = 0 (0x0) fstat(10,{ mode=-rw------- ,inode=28762,size=156,blksize=4096 }) = 0 (0x0) pwrite(0xa,0x21c09400,0x1c,0x9c,0xffff800021c0bea4,0x7fffffffa9f0) = 28 (0x1c) pwrite(0xa,0x7fffffffd57c,0x4,0x9c,0xffff800021c0bea4,0x7fffffffa9f0) = 4 (0x4) clock_gettime(13,{1343808216.000000000 }) = 0 (0x0) fcntl(10,F_SETLK,0x7fffffffd610) = 0 (0x0) stat("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails/dovecot.index.log",{ mode=-rw------- ,inode=28762,size=184,blksize=4096 }) = 0 (0x0) fstat(10,{ mode=-rw------- ,inode=28762,size=184,blksize=4096 }) = 0 (0x0) rename("/mailstore/domains/test.com/test/mdbox/mailboxes/Spam/dbox-Mails","/mailstore/domains/test.com/test/mdbox/..DOVECOT-TrasH") = 0 (0x0) open(".",O_RDONLY,00) = 12 (0xc) open("/mailstore/domains/test.com/test/mdbox/..DOVECOT-TrasH",O_NOFOLLOW,00) = 13 (0xd) fchdir(0xd,0x100,0x0,0x7b30,0x101010101010101,0x8080808080808080) = 0 (0x0) stat(".",{ mode=drwx------ ,inode=28761,size=3,blksize=131072 }) = 0 (0x0) open(".",O_NONBLOCK|0x20000,00) = 14 (0xe) fstat(14,{ mode=drwx------ ,inode=28761,size=3,blksize=131072 }) = 0 (0x0) fcntl(14,F_SETFD,FD_CLOEXEC) = 0 (0x0) fstatfs(0xe,0x7fffffffd3a0,0x21c00400,0x29,0x61ff20,0x0) = 0 (0x0) getdirentries(0xe,0x21c31000,0x1000,0x21c284e8,0x61ff20,0x0) = 52 (0x34) unlink("dovecot.index.log") = 0 (0x0) getdirentries(0xe,0x21c31000,0x1000,0x21c284e8,0x61ff20,0x0) = 0 (0x0) close(13) = 0 (0x0) lseek(14,0x0,SEEK_SET) = 0 (0x0) close(14) = 0 (0x0) fchdir(0xc,0x0,0x21c07400,0x28,0x61ff20,0x0) = 0 (0x0) close(12) = 0 (0x0) rmdir(0x21c18470,0x0,0x21c07400,0x28,0x61ff20,0x0) = 0 (0x0) rmdir(0x21c184f0,0x4,0x21c18000,0x7af8,0xffffffffffdd6669,0x21c8c298) = 0 (0x0) open("/mailstore/domains/test.com/test/mdbox/dovecot.mailbox.log",O_RDWR|O_APPEND,0125337603) = 12 (0xc) write(12,"\^A\0\0\0\M^L\M-M%\^E\M^F\M-b\^X"...,24) = 24 (0x18) fstat(12,{ mode=-rw------- ,inode=28751,size=144,blksize=4096 }) = 0 (0x0) rmdir(0x21c186d0,0x21e41eb8,0x21c186d0,0x7918,0xffffffffffdd6849,0x21c8c298) ERR#2 'No such file or directory' write(12,"\^B\0\0\0\M-Xb\M^JRY\M-I{x\M--C"...,24) = 24 (0x18) fstat(12,{ mode=-rw------- ,inode=28751,size=168,blksize=4096 }) = 0 (0x0) write(2,"\^A\^B6293 Mailbox deleted: Spam"...,29) = 29 (0x1d) gettimeofday({1343808216.058749 },0x0) = 0 (0x0) madvise(0x21e65000,0x1000,0x5,0x264,0x7fffffffcfa0,0xffffffff) = 0 (0x0) madvise(0x21e63000,0x1000,0x5,0x262,0x7fffffffcfa0,0xffffffff) = 0 (0x0) madvise(0x21e41000,0x2000,0x5,0x240,0x7fffffffcfa0,0xffffffff) = 0 (0x0) madvise(0x21d8d000,0x4000,0x5,0x18c,0x7fffffffcfa0,0xffffffff) = 0 (0x0) madvise(0x21c91000,0x2000,0x5,0x90,0x7fffffffcfa0,0xffffffff) = 0 (0x0) gettimeofday({1343808216.059531 },0x0) = 0 (0x0) getpid() = 6293 (0x1895) __sysctl(0x7fffffffd830,0x4,0x0,0x0,0x21c8f000,0x23) = 0 (0x0) write(11,"3 OK Delete completed.\r\n",24) = 24 (0x18) gettimeofday({1343808216.060105 },0x0) = 0 (0x0) Regard, Nikolai.

2 1

[Dovecot] ntlm auth / usernames with white spaces
by Matthias Lay 01 Aug '12

01 Aug '12

Hi, we experienced some problems with white spaces in usernames (this was NOT our idea) authenticated bei dovecots ntlmhelper I wrote a little patch fixing this, if you would like. patch applies on 2.1.7 and 2.1.8 (tested those) diff -up ./src/auth/mech-winbind.c.username ./src/auth/mech-winbind.c --- ./src/auth/mech-winbind.c.username 2012-07-27 09:52:33.422553807 +0200 +++ ./src/auth/mech-winbind.c 2012-07-27 14:23:03.718619388 +0200 @@ -239,8 +239,16 @@ do_auth_continue(struct auth_request *au return HR_FAIL; } else if (strcmp(token[0], "AF") == 0) { const char *user, *p, *error; + int ti=1; + + if(gss_spnego) + ti=2; + /* some braindead administrators like spaces in usernames */ + user = token[ti]; + while(token[++ti]){ + user = t_strconcat(user, " ", token[ti], NULL); + } - user = gss_spnego ? token[2] : token[1]; i_assert(user != NULL); p = strchr(user, '\\');

2 2

[Dovecot] BUG: LDAP extension failed to authenticate if 'base' DN configuration is empty ''
by Hendy Irawan 01 Aug '12

01 Aug '12

Dear Dovecot developers, We have several context entries and want to authenticate a user against the whole LDAP server. However when setting "base = " Dovecot LDAP fails with following message: Jul 29 10:50:59 nitik1 dovecot: auth: Error: ldap(hendy(a)staging.member.berbatik.com,127.0.0.1): ldap_search((virtualMail=hendy(a)staging.member.berbatik.com)) failed: Other (e.g., implementation specific) error This limits the search to only one base DN, e.g. base = dc=staging,dc=berbatik,dc=com The ldap client library is able to search entries using an empty base DN, so it should be possible for Dovecot LDAP to do the same. An even more elegant solution will be the ability to specify multiple base DNs, but if Dovecot can search the "root DN" (empty string) it would be great. Thank you. Hendy ----- http://www.Soluvas.com/ Soluvas - Making eCommerce Work for You -- View this message in context: http://old.nabble.com/BUG%3A-LDAP-extension-failed-to-authenticate-if-%27ba… Sent from the Dovecot mailing list archive at Nabble.com.

2 4

[Dovecot] fts solr : out of memory
by tonio＠starbridge.org 31 Jul '12

31 Jul '12

Hi Timo, since I've upgraded to 2.1.8, solr indexer doesnt work correctly. I see a lot of these errors in logs: Fatal: master: service(indexer-worker): child 9582 returned error 83 (Out of memory (service indexer-worker { vsz_limit=256 MB }, you may need to increase it)) I've tried to set vsz_limit to a lot more, (around 4096 MB) but same problem occurs. thank for your help ! Regards Tonio Java(TM) SE Runtime Environment (build 1.6.0_31-b04) doveconf -n # 2.1.8: /etc/dovecot/dovecot.conf # OS: Linux 3.2.13-xxxx-std-ipv6-64 x86_64 Debian wheezy/sid xfs auth_cache_negative_ttl = 0 auth_cache_size = 10 M auth_mechanisms = plain login dict { quota = mysql:/etc/dovecot/dovecot-dict-quota-sql.conf } hostname = maildir2.spamguard.fr log_timestamp = %Y-%m-%d %H:%M:%S mail_gid = vmail mail_location = sdbox:/home/virtual/%u mail_plugins = quota fts fts_solr acl zlib mail_privileged_group = vmail mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = comparator-i;octet comparator-i;ascii-casemap fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date spamtest spamtestplus virustest namespace { inbox = yes location = prefix = separator = / type = private } namespace { alias_for = hidden = yes inbox = no list = no location = prefix = INBOX/ separator = / type = private } namespace { list = children location = sdbox:/home/virtual/%%u:INDEX=/home/virtual/%u/shared/%%u prefix = shared/%%u/ separator = / subscriptions = no type = shared } passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } plugin { acl = vfile acl_shared_dict = file:/home/virtual/shared-%d-mailboxes.db autocreate = Spam autocreate2 = SpamFalse autocreate3 = SpamToLearn autocreate4 = Sent autosubscribe = Spam autosubscribe2 = SpamFalse autosubscribe3 = SpamToLearn autosubscribe4 = Sent fts = solr fts_solr = url=http://localhost:8081/solr/ mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename save mailbox_create mail_log_fields = uid box msgid size quota = dict:User quota::proxy::quota quota2 = dict:User quota::file:/home/virtual/%u/dovecot-quota quota_warning = storage=85%% quota-warning 85 %u sieve = ~/dovecot.sieve sieve_before = /home/virtual/sieve/ sieve_dir = ~/sieve zlib_save = bz2 zlib_save_level = 9 } protocols = imap pop3 sieve lmtp service auth { unix_listener /var/spool/postfix-in2/private/auth { group = mail mode = 0660 user = postfix } unix_listener /var/spool/postfix-maildir2/private/auth { group = mail mode = 0660 user = postfix } unix_listener /var/spool/postfix-msa/private/auth { group = mail mode = 0660 user = postfix } unix_listener /var/spool/postfix-smtp06/private/auth { group = mail mode = 0660 user = postfix } unix_listener /var/spool/postfix/private/auth { group = mail mode = 0660 user = postfix } unix_listener auth-in2-master { mode = 0660 user = vmail } unix_listener auth-maildir2-master { mode = 0660 user = vmail } unix_listener auth-master { mode = 0660 user = vmail } unix_listener auth-msa-master { mode = 0660 user = vmail } unix_listener auth-out-master { mode = 0660 user = vmail } unix_listener auth-smtp06-master { mode = 0660 user = vmail } unix_listener auth-userdb { mode = 0660 user = vmail } } service dict { unix_listener dict { mode = 0600 user = vmail } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 } process_limit = 256 process_min_avail = 4 service_count = 0 vsz_limit = 256 M } service lmtp { inet_listener lmtp { address = 46.105.108.210 port = 24 } user = vmail vsz_limit = 368 M } service managesieve-login { inet_listener sieve { port = 4190 } process_limit = 256 vsz_limit = 64 M } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 } process_limit = 256 process_min_avail = 4 service_count = 0 vsz_limit = 256 M } service quota-warning { executable = script /usr/bin/quota-warning.sh unix_listener quota-warning { mode = 0600 user = vmail } user = vmail } ssl = required ssl_ca = </etc/dovecot/ca-bundle.crt ssl_cert = </etc/dovecot/mx2.eole-its.com.certchained.pem ssl_key = </etc/postfix/tls/mx2.eole-its.com.key.pem ssl_verify_client_cert = yes userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } protocol imap { imap_client_workarounds = delay-newmail imap_max_line_length = 64 k mail_max_userip_connections = 60 mail_plugins = quota imap_quota acl imap_acl autocreate mail_log notify fts fts_solr zlib } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } protocol sieve { managesieve_logout_format = bytes ( in=%i : out=%o ) } protocol lda { info_log_path = log_path = mail_plugins = sieve quota autocreate zlib postmaster_address = postmaster(a)spamguard.fr quota_full_tempfail = yes } protocol lmtp { info_log_path = log_path = mail_plugins = sieve quota autocreate fts fts_solr zlib postmaster_address = postmaster(a)spamguard.fr quota_full_tempfail = yes } local 46.105.108.210 { protocol imap { ssl = required ssl_cert = </etc/dovecot/imap.spamguard.fr.certchained2.pem ssl_key = </etc/dovecot/imap.spamguard.fr.key.pem } } local 87.98.168.xx { protocol imap { ssl = required ssl_cert = </etc/dovecot/mail.ovxx.fr.certchained.pem ssl_key = </etc/dovecot/mail.ovxx.fr.key.pem } }

3 7

[Dovecot] FETCH Error
by Micha Krause 31 Jul '12

31 Jul '12

Hi, I have the following problem: Jul 18 14:36:09 mailint1 dovecot: imap(micha): Error: FETCH [] for mailbox INBOX.Sent UID 166 got too little data: 120860 vs 120867 Jul 18 14:36:09 mailint1 dovecot: imap(micha): Error: Maildir filename has wrong W value: /var/mail/mailboxes/users/micha/.Sent/cur/1240390202.Rfd9752b8Q14135.mail-alt,S=280003,W=284007:2,S Jul 18 14:36:09 mailint1 dovecot: imap(micha): Error: Corrupted index cache file /var/mail/mailboxes/users/micha/.Sent/dovecot.index.cache: Broken virtual size for mail UID 166 so far i tried deleting: /var/mail/mailboxes/users/micha/.Sent/dovecot.index.cache /var/mail/mailboxes/users/micha/.Sent/dovecot.index /var/mail/mailboxes/users/micha/.Sent/dovecot.index.log I tried to renaming: /var/mail/mailboxes/users/micha/.Sent/cur/1240390202.Rfd9752b8Q14135.mail-alt,S=280003,W=284007:2,S to /var/mail/mailboxes/users/micha/.Sent/cur/1240390202.Rfd9752b8Q14135.mail-alt,S=280003:2,S I tried doveadm: doveadm force-resync -u micha INBOX.Sent Dovecot version is: 2.0.9 Micha Krause

2 1

[Dovecot] mdbox with separate index location results in many emptydirectories
by Jürgen Obermann 31 Jul '12

31 Jul '12

Hallo, I use dovecot 2.1.7 with mdbox format and I specified a separate location for mailbox index files with mail_location = mdbox:/dovecot/storage%h:INDEX=/dovecot/index%h With this setting I get for every mailbox a directory under both filesystems /dovecot/index and /dovecot/storage, e.g. for the inbox it looks like that: # ls -lR /dovecot/index/home/hrz/myuser/mailboxes/INBOX /dovecot/storage/home/hrz/myuser/mailboxes/INBOX /dovecot/index/home/hrz/myuser/mailboxes/INBOX: total 49 -rw------- 1 myuser hrz 20480 Jul 20 11:12 dovecot.index.cache -rw------- 1 myuser hrz 1280 Jul 20 08:00 dovecot.index.log -rw------- 1 myuser hrz 301 Jul 19 16:45 dovecot.index.search -rw------- 1 myuser hrz 20 Jul 19 16:45 dovecot.index.search.uids /dovecot/storage/home/hrz/myuser/mailboxes/INBOX: total 3 drwx------ 2 myuser hrz 2 Jul 19 15:20 dbox-Mails /dovecot/storage/home/hrz/myuser/mailboxes/INBOX/dbox-Mails: total 0 As expected the index files now reside under /dovecot/index%h/mailboxes/, but the path /dovecot/storage%h/mailboxes/ also contains for every user and every mailbox name a directory which in turn contains only an empty subdirectory 'dbox-Mails'. These directories seem to me to sum up to a lot of unneded infrstructure objects. I tried to delete these empty directories, but dovecot did not like that and stopped to work. So somehow they are necessary, in spite of setting a separate index file location. So my question is, could these empty directories be avoided, perhaps in a future version? Greetings, Juergen -- Hochschulrechenzentrum der | Mail: Juergen.Obermann(a)hrz.uni-giessen.de Justus-Liebig-Universitaet | WWW: http://www.uni-giessen.de/obermann/ Heinrich-Buff-Ring 44 | Tel: 0641-99-13054 (0641-99-13001) D-35392 Giessen, Germany | Fax: 0641-99-13009

2 1

[Dovecot] improve error messages with quotes
by Radim Kolar 31 Jul '12

31 Jul '12

I propose to improve error messages but inserting quotes. I spent good time until I looked into source code to find right meaning of error message. I would like them in following format: namespace configuration error no 'hidden=no' namespaces

2 1

[Dovecot] Empty argument in "executable = script ..." service
by Florian Wagner 31 Jul '12

31 Jul '12

Hi, what is the point of adding an empty argument to the command called by the "executable = script ..." setting in a service? I guess that would be the call to array_append_space at line 57 in util/script.c. Background is that I'm trying to run bogofilter through the extprograms Pigeonhole plugin. So I've defined a service entry with a unix_listener and wondered why my test shell script works but bogofilter exits with a cryptic error. Turns out that this empty argument at the end trips up the bogofilter argument parsing code. If I manually call bogofilter with execv and add that empty argument I get the same cryptic error. Regards Florian

2 1

[Dovecot] Dovecot Director behaviour when two or more fail
by Dominic Malolepszy 31 Jul '12

31 Jul '12

Hi, On the Dovecot wiki here http://wiki2.dovecot.org/Director it says the following: "The directors are going to connect to each others in a ring. For example if you have servers called A, B and C, director will create connections A->B, B->C and C->A" I am curious what happens in a scenario when two or more directors fail and potentially break a ring in half, do the active directors detect this and reform a new ring? Dominic

2 1

[Dovecot] Help needed with configuration giving dict error No such file
by Ajax 31 Jul '12

31 Jul '12

Each time a mail message is delivered to a mailbox records like the following appear in /var/log/dovecot.warn: Jul 29 10:02:05 iris dovecot: lmtp(29320, jax(a)XXX.com) Error: file dict commit: file_dotlock_open(/var/vmail/XXX.com/jax/home/maildir/dovecot-quota) failed: No such file or directory Jul 29 10:02:05 iris dovecot: lmtp(29320, jax(a)XXX.com) Error: file dict commit: file_dotlock_open(/var/vmail/XXX.com/jax/home/maildir/dovecot-quota) failed: No such file or directory Jul 29 10:02:05 iris dovecot: lmtp(29320, jax(a)XXX.com) Error: dict quota: Quota update failed, it's now desynced This is with Dovecot 2.1.7 installed by Debian Squeeze binary packages, dovecot-core v 1:2.1.7-2~bpo60+1, and friends. The host is running GNU/Linux 3.2.0-0.bpo.2-amd64 and on a xfs filesystem. Entries in /etc/dovecot/users look like this: jax@XXX.com:{plain}password The output from 'doveconf -n' is in the attachment to this mail message. I'm a beginner without experience with either IMAP servers or clients. Can you give me pointers to see what I'm missing that causes the errors logged as above? The user data base looks like this: userdb { args = uid=5000 gid=5000 home=/var/vmail/%d/%n/home mail=maildir:/var/vmail/%d/%n driver = static } Being a beginner, I wonder if is necessary to manually make home directories for each '/var/vmail/%d/%n/home'? I've tried test accounts with and without empty "home" directories at the indicated locations without seeing any difference in the error indications. Is it necessary to manually populate the "home" directories? Besides having no clue about the errors logged, I don't understand what it takes to make quotas work nor do I understand what options are available or advisable. The distribution wiki/QuotaMaildir.txt seems clear that the Maildif+++ backend is indicated but beyond that I remain in the dark. FWIW, I've yet to try a real IMAP client. Thank you for any pointers you can give me.

2 1

[Dovecot] Problem with running two dovecot instances on the same server
by Alexandr Sabitov 31 Jul '12

31 Jul '12

Hello All, Have anyone met the problem I am struggling with at the moment ? The problem is when I run two instances of dovecot 2.1.8 which are one for proxy-director and another one is a regular one on the same server then I have big amount of strange entries in the /var/log/mail.err: Jul 26 11:51:20 dovecot-test-1 dovecot: director: Error: Empty server list Jul 26 11:51:20 dovecot-test-1 dovecot: director: Fatal: Invalid value for director_mail_servers setting Jul 26 11:51:20 dovecot-test-1 dovecot: master: Error: service(director): command startup failed, throttling for 60 secs Jul 26 11:52:20 dovecot-test-1 dovecot: director: Error: Empty server list Jul 26 11:52:20 dovecot-test-1 dovecot: director: Fatal: Invalid value for director_mail_servers setting Jul 26 11:52:20 dovecot-test-1 dovecot: master: Error: service(director): command startup failed, throttling for 60 secs That's for sure set->director_mail_servers variable in main_preinit of ./src/director/main.c But after dumping it it turns out that ppid of the process which failed to use main_preinit function is a "regular" dovecot not the proxy one. When main_preinit is used by dovecot-proxy then set->director_mail_servers = ip address of a mail server and it is all good but if main_preinit is used by dovecot then set->director_mail_servers = empty and I get fatal errors in logs. So here is a question: How come that "non-proxy" dovecot requests director_mail_servers variable and writes fatal error in the logs if it doesn't find it ? Thank you very much for any assistance! Please find my configs: DOVECOT: root@dovecot-test-1:~/software/dovecot/dovecot-2.1.8# /usr/local/dovecot/sbin/dovecot -n # 2.1.8: /usr/local/dovecot/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.5 auth_mechanisms = plain digest-md5 cram-md5 apop auth_verbose = yes base_dir = /var/run/dovecot/ default_internal_user = webmail disable_plaintext_auth = no doveadm_password = secret listen = 192.168.0.42 mail_fsync = always mail_location = maildir:~/ mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = " quota fts fts_solr" mmap_disable = yes passdb { args = /usr/local/dovecot/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { fts = solr fts_solr = break-imap-search url=http://localhost:8080/solr/ quota = maildir:User quota } service doveadm { inet_listener { port = 8282 } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } service imap { executable = imap } service lmtp { inet_listener lmtp { port = 24 } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } service pop3 { executable = pop3 } ssl_cert = </usr/local/dovecot/ssl/dovecot.pem ssl_key = </usr/local/dovecot/ssl/dovecot.pem userdb { args = /usr/local/dovecot/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol imap { mail_plugins = " quota fts fts_solr imap_quota" } DOVECOT-PROXY: root@dovecot-test-1:~/software/dovecot/dovecot-2.1.8# /usr/local/dovecot/sbin/dovecot -c /usr/local/dovecot/etc/dovecot/dovecot-proxy.conf -n # 2.1.8: /usr/local/dovecot/etc/dovecot/dovecot-proxy.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.5 auth_verbose = yes base_dir = /var/run/dovecot-proxy default_internal_user = webmail director_mail_servers = 192.168.0.42 director_servers = 192.168.0.41 disable_plaintext_auth = no doveadm_password = secret doveadm_proxy_port = 8282 instance_name = dovecot-proxy listen = 192.168.0.41 login_greeting = Dovecot Proxy ready. mail_location = maildir:~/ passdb { args = proxy=y nopassword=y driver = static } service auth-worker { user = webmail } service auth { client_limit = 2400 } service director { fifo_listener login/proxy-notify { mode = 0666 } inet_listener { port = 8181 } unix_listener director-userdb { mode = 0600 } unix_listener login/director { mode = 0666 } } service doveadm { inet_listener { port = 8282 } } service imap-login { executable = imap-login director inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } service imap { service_count = 0 } service lmtp { inet_listener lmtp { port = 24 } } service pop3-login { executable = pop3-login director inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } service pop3 { service_count = 0 } ssl_cert = </usr/local/dovecot/ssl/dovecot.pem ssl_key = </usr/local/dovecot/ssl/dovecot.pem userdb { args = /usr/local/dovecot/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol imap { mail_max_userip_connections = 100 } protocol doveadm { auth_socket_path = director-userdb } -- Regards, Alexandr Sabitov

3 6

[Dovecot] maildir_copy_with_hardlinks on v.2.0.19
by mailing list subscriber 31 Jul '12

31 Jul '12

Hi, I'm trying to get the so-called "single instance store" (I think cyrus has got the name for the first time) with dovecot --version = 2.0.19 binary package installed from ubuntu 12.04 lts official repo. I have checked that "maildir_copy_with_hardlinks" is enabled ("dovecot -a|grep hard" shows "yes") then I have installed and enabled the lmtp component of dovecot. The configuration "dovecot -n" is pasted here: http://paste.lug.ro/131180 Also in the same paste is a strace against dovecot and childrent showing evidence of the MTA delivering a single copy of the message via LMTP with multiple RCPT TO: headers. However when looking in the Maildir, I see the mail break down into three separate files instead of expected hardlinked files ("stat" and "ls" shows one single link count, inodes are different) Given the above data, what (am I | dovecot is) doing wrong? Please cc me if you need additional input when replying as I'm not subscribed to the list (I'll watch the thread online only) Many thanks in advance.

3 6

Re: [Dovecot] [GoLugTech] thunderbird
by Steve Litt 31 Jul '12

31 Jul '12

On Mon, 30 Jul 2012 23:43:49 -0400, Chris Clifton said: > Hi all, > > Do I read it correctly that thunderbird funding is being cut back by > mozilla? > > I'm not on a linux mail client yet, wondering what others are using in > ubuntu for mail client, I need multiple pop3 profiles, good html > support, fast indexing and searching, solid gpg support and all the > usual bells and whistles. Evolution seems to be in pretty widespread > use. Wondering what others like and use heavily. Hi Chris, I tried Evolution once about 10 years ago, and it was too complex and comprehensive for me to understand. The centerpiece of my emailing activity is a Dovecot IMAP server on my daily driver desktop computer. The way it works is that fetchmail grabs all my email from my various POP accounts, pushes them through procmail, whose filters distribute the emails into the proper Dovecot IMAP directories (and also /dev/null stuff from PITA people). As far as I know, my Dovecot has never malfunctioned. Currently, I access my local IMAP with Claws-Mail. Claws is capable, robust, and does what I need without being an ecological disaster like Kmail or intermittently pig slow like Thunderbird. Claws' configuration is difficult to wrap your head around, and very much in need of better documentation, but so far, thanks to a knowledgeable and helpful user community on the mailing list, I've been able to make almost every config change to speed my interaction with Claws. My one complaint about Claws that can't be cured by documentation is its propensity to do everything with one process and one thread, so while you're sending an email or scanning your IMAP, you cannot look at other emails. I also wanted their powerful search to be able to recurse folders, and when nobody volunteered to do it, I tried to do it myself. Making something recursive sounds like simply a matter of writing a simple loop around the existing functionality, but what I found out is, at least this part of Claws was written in a manner resembling MVC, with process and UI completely commingled. For that reason I was unable to make it recursive. I have Claws on my daily driver and all my laptops. Thanks to Kevin Korb's instructions, on the laptops I was able to tell Claws its IMAP server was at 127.0.0.1. I pinholed my OpenBSD/pf firewall appliance to port forward incoming ssh to my daily driver. Then, on my laptop, if I'm at home and on the LAN, I run the following inhouse.sh sudo ssh -NTL 993:127.0.0.1:993 slitt(a)192.168.1.88 While on the road I run this travelling.sh: sudo ssh -NTL 993:127.0.0.1:993 slitt(a)99.99.99.99 In the preceding, 99.99.99.99 is the IP address my ISP gave me, while 192.168.1.88 is the LAN IP address of my daily driver. This makes 127.0.0.1:993 get pushed through ssh to the ISP supplied internet address or the LAN address. So I can use Claws to interact with my daily driver desktop anywhere I go. I'm extremely pleased with this setup. My IMAP tree is trivial to back up, and gives me the assurance that if Claws-Mail ever commits suicide the way Kmail did when they went to Kmail2, I can simply plug in a different IMAP enabled email client. Meanwhile, Claws gives me an extremely productive and easy to use user interface. With my client/server setup, I no longer need to copy all my email too and from the laptop when travelling. I'm going to present on my remote use of my daily driver desktop Dovecot, using Claws and ssh, at tomorrow night's GoLUG meeting. HTH, SteveT Steve Litt * http://www.troubleshooters.com/ * http://twitter.com/stevelitt Troubleshooting Training * Human Performance

2 1

[Dovecot] openbsd + dovecot not downloading emails
by GVG GVG 31 Jul '12

31 Jul '12

Dear list members, first my doveconf -n output: -------------- # 2.0.17 (684381041dc4+): /etc/dovecot/dovecot.conf # OS: OpenBSD 5.1 i386 ffs mail_location = mbox:/var/mail:INBOX=/var/mail/%u mbox_write_locks = fcntl mmap_disable = yes passdb { driver = bsdauth } ssl_cert = </etc/ssl/dovecotcert.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep tb-lsub-flags } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } --------------- when using evolution from a remote linux machine, and try to download/fetch the e-mails from my e-mail server, I get a pop-up window indicationg that is trying to do so (after I did sign-in with my user-id and password!). The problem is taht this process stays there forever and no messages get downloaded! Thanks for your help Tim

2 2

[Dovecot] Address extensions
by Armistead, Kurt 31 Jul '12

31 Jul '12

Hi guys, I'm trying to set up in-mailbox routing for messages using the + delimiter. The server runs postfix and dovecot 1.2.15. I have re-defined the delivery service in master.cf as "-f ${sender} -d ${user}@${nexthop} -n -m INBOX.${extension}" (server was formerly courier) but the routing only works when the destination folder has no uppercase characters. "Folder1" doesn't deliver correctly while "folder2" does. What am I doing wrong? Kurt

2 1

Re: [Dovecot] expire-tool stops on first box with nothing to expire in it
by Joseph Tam 31 Jul '12

31 Jul '12

Timo Sirainen writes: > > In practice, if this query is done on a periodic interval (e.g. daily), > > the date.saved will be roughly correct, and is usable as an age test > > for expungement. > > > > Is there a way to force this value to be cached when the client actually > > saves or moves a message? > > Done for save: http://hg.dovecot.org/dovecot-2.1/rev/c598f76eeeed > > Fixed copy: http://hg.dovecot.org/dovecot-2.1/rev/b13b8267999d > > It still doesn't add it to cache if it's not already cached in both the > source and destination mailbox, but usually it should be after initial > doveadm run. Thanks, Timo. Joseph Tam <jtam.home(a)gmail.com>

1 0

Re: [Dovecot] Enable ACL for master user
by punit_j 30 Jul '12

30 Jul '12

Hi , No one has a solution to this ? Regards, Punit

1 0

[Dovecot] SSL Warnings in Debug Logs
by Asai 29 Jul '12

29 Jul '12

Greetings, In doing some debugging of authentication issues, I'm wondering if these SSL warnings are anything to be investigating? Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x10, ret=1: before/accept initialization [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: before/accept initialization [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2002, ret=-1: SSLv2/v3 read client hello A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 read client hello A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write server hello A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write certificate A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write key exchange A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write server done A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 flush data [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2002, ret=-1: SSLv3 read client certificate A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2002, ret=-1: SSLv3 read client certificate A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 read client key exchange A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 read finished A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write change cipher spec A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 write finished A [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2001, ret=1: SSLv3 flush data [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x20, ret=1: SSL negotiation finished successfully [192.168.70.101] Jul 24 11:23:16 triata dovecot: imap-login: Warning: SSL: where=0x2002, ret=1: SSL negotiation finished successfully [192.168.70.101] [root@triata ~]# doveconf -n # 2.0.14: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.32.1.el5xen x86_64 CentOS release 5.5 (Final) ext3 auth_debug = yes auth_debug_passwords = yes auth_mechanisms = plain login auth_verbose = yes auth_verbose_passwords = plain mail_debug = yes mail_home = /vmail/%d/%n/home mail_location = maildir:/vmail/%d/%n managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date namespace { inbox = yes location = prefix = separator = / type = private } passdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } plugin { mail_log_fields = uid box msgid size from sieve = /vmail/%d/%n/sievescript } protocols = imap pop3 lmtp sieve sieve service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { group = vmail mode = 0660 user = vmail } unix_listener auth-userdb { mode = 0660 user = vmail } user = root } service imap-login { process_min_avail = 3 service_count = 0 vsz_limit = 0 } service managesieve-login { inet_listener sieve { port = 4190 } process_min_avail = 0 service_count = 1 vsz_limit = 64 M } ssl_cert = </etc/pki/dovecot/certs/smtpd.pem ssl_key = </etc/pki/dovecot/private/smtpd.pem userdb { args = /etc/dovecot/dovecot-mysql.conf driver = sql } verbose_ssl = yes protocol lda { hostname = triata.globalchangemultimedia.net mail_plugin_dir = /usr/lib64/dovecot/ mail_plugins = sieve postmaster_address = postmaster(a)globalchangemultimedia.net } protocol imap { imap_idle_notify_interval = 24 mins mail_max_userip_connections = 20 } protocol sieve { mail_max_userip_connections = 10 managesieve_implementation_string = Dovecot Pigeonhole managesieve_logout_format = bytes=%i/%o managesieve_max_line_length = 65536 } -- Asai

2 2

[Dovecot] mysql auth failover failing
by Paul B. Henson 29 Jul '12

29 Jul '12

We are running dovecot to provide authentication for postfix, using two mysql servers in a multi-master replication set as the password source: ---------------------------------------- # 2.0.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.37-gentoo-r4 x86_64 Gentoo Base System release 2.0.2 auth_mechanisms = plain login digest-md5 cram-md5 auth_verbose = yes passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } protocols = none service auth-worker { unix_listener auth-worker { user = postfix } user = $default_internal_user } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } user = postfix } ssl = no userdb { driver = passwd } --------------------------------------- With an sql config of: ------------------------- driver = mysql connect = host=mysql-1.unx.csupomona.edu host=mysql-2.unx.csupomona.edu dbname=idmgmt user=postfix password=XXXXXXX default_pass_scheme = PLAIN password_query = XXXXXXXXX ------------------------- According to the sample SQL configuration file "HA / round-robin load-balancing is supported by giving multiple host settings, like: host=sql1.host.org host=sql2.host.org". However, as far as I can tell dovecot only connects to the first listed host, and processes all queries through it, there does not appear to be any load-balancing going on. That's not necessarily a dealbreaker; however, high-availability does not appear to be working either. If I shutdown the first mysql server, dovecot starts to log connection failures: Sep 9 15:47:34 tweak dovecot: auth: Error: mysql(mysql-1.unx.csupomona.edu): Connect failed to database (idmgmt): Can't connect to MySQL server on 'mysql-1.unx.csupomona.edu' (111) - waiting for 1 seconds before retry Sep 9 15:47:39 tweak dovecot: auth: Error: mysql(mysql-1.unx.csupomona.edu): Connect failed to database (idmgmt): Can't connect to MySQL server on 'mysql-1.unx.csupomona.edu' (111) - waiting for 25 seconds before retry And postfix starts to fail authentications: Sep 9 15:47:35 tweak postfix/smtpd[5119]: warning: bender.iitsys.csupomona.edu[134.71.250.134]: SASL DIGEST-MD5 authentication failed: Connection lost to authentication server Now and again the authentication process dies: Sep 9 15:47:39 tweak dovecot: auth: Panic: file auth-request-handler.c: line 697 (auth_request_handler_flush_failures): assertion failed: (auth_request->state == AUTH_REQUEST_STATE_FINISHED) Sep 9 15:47:39 tweak dovecot: auth: Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0(+0x3f71a) [0x7f25822ca71a] -> /usr/lib64/dovecot/libdovecot.so.0(+0x3f766) [0x7f25822ca766] -> /usr/lib64/dovecot/libdovecot.so.0(+0x198ca) [0x7f25822a48ca] -> dovecot/auth() [0x4137f4] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handle_timeouts+0xd4) [0x7f25822d5fe4] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_handler_run+0x5b) [0x7f25822d6bcb] -> /usr/lib64/dovecot/libdovecot.so.0(io_loop_run+0x28) [0x7f25822d5c48] -> /usr/lib64/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f25822c3de3] -> dovecot/auth(main+0x2be) [0x4179de] -> /lib64/libc.so.6(__libc_start_main+0xfd) [0x7f2581898bbd] -> dovecot/auth() [0x40bdc9] Sep 9 15:47:39 tweak dovecot: master: Error: service(auth): child 4154 killed with signal 6 (core dumps disabled) Requests start to pile up: Sep 9 15:51:46 tweak dovecot: auth: Warning: auth workers: Auth request was queued for 25 seconds, 45 left in queue Lookups time out: Sep 9 15:57:22 tweak dovecot: auth: Error: auth worker: Aborted request: Lookup timed out This occasionally pops up: Sep 9 15:58:38 tweak dovecot: auth: Fatal: net_connect_unix(auth-worker) failed: Resource temporarily unavailable And sometimes the auth process gets temporarily disabled: Sep 9 15:58:57 tweak dovecot: master: Error: service(auth): command startup failed, throttling Resulting in more postfix authentication failures: Sep 9 15:58:57 tweak postfix/smtpd[6531]: warning: bender.iitsys.csupomona.edu[134.71.250.134]: SASL DIGEST-MD5 authentication failed: Sep 9 15:59:08 tweak postfix/smtpd[6551]: fatal: no SASL authentication mechanisms To the point where postfix also temporarily throttles smtpd: Sep 9 15:59:21 tweak postfix/master[6526]: warning: /usr/lib64/postfix/smtpd: bad command startup -- throttling Resulting in a complete unavailability of smtp service, not just unavailability of authenticated services. I don't think all authentications fail during the scenario, but I think the majority do. Based on the network traffic, dovecot is almost continuously trying to connect to the first listed server. It sometimes connects to the second listed server, but when it does, the connection does not persist, it goes away almost immediately. Ideally, I would like no authentications to fail if one of the MySQL servers is unavailable. If a few fail just when the server dies, that would be undesirable but acceptable as long as they do not continuously fail while the server is down. Am I doing something wrong? Does the example sql config have incorrect information? We were previously running dovecot 1.2.11, we just recently upgraded to 2. In the previous version, we actually had two different passdb's configured, each one listing only one of the mysql servers. I seem to recall that was the recommendation at the time for high-availability. When that configuration did not seem to work under version 2, I found an updated recommendation to list both servers in the same passdb, which also does not appear to work correctly. I actually went back and tested the older version, and determined it seemed to work okay in the case where the server was up but the service was down, and connections were refused, but also failed a large number of authentication attempts when the server was completely down and connections were timing out. Thanks much... -- Paul B. Henson | (909) 979-6361 | http://www.csupomona.edu/~henson/ Operating Systems and Network Analyst | henson(a)csupomona.edu California State Polytechnic University | Pomona CA 91768

5 19

[Dovecot] Enable ACL for master user
by punit_j 29 Jul '12

29 Jul '12

Hi Team, I have dovecot setup and I have enabled master User login in dovecot.conf file as below :- auth_master_user_separator = * passdb { driver = passwd-file args = /etc/dovecot/passwd.masterusers master = yes pass = yes } passdb { driver = shadow } userdb { driver = passwd } and craeted file. I can login to the user but what I see after login is : - Trying 0.0.0.0... Connected to 0. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS UIDPLUS LIST-EXTENDED I18NLEVEL=1 STARTTLS AUTH=PLAIN] Dovecot ready. a login user*masteruser password a OK Logged in. a list "" * * LIST (\HasNoChildren) "." "Trash" * LIST (\Unmarked) "." "INBOX" a OK List completed. However when I login as a normal user I see this : - Connected to 0. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 SASL-IR SORT THREAD=REFERENCES MULTIAPPEND UNSELECT LITERAL+ IDLE CHILDREN NAMESPACE LOGIN-REFERRALS UIDPLUS LIST-EXTENDED I18NLEVEL=1 STARTTLS AUTH=PLAIN] Dovecot ready. a login user userpassword a OK Logged in. a list "" * * LIST (\HasNoChildren) "." "Drafts" * LIST (\HasNoChildren) "." "Trash" * LIST (\HasNoChildren) "." "Sent items" * LIST (\HasNoChildren) "." "INBOX" a OK List completed. I think its because of ACL for user and it is using masterusers ACL. I looked at http://wiki2.dovecot.org/PostLoginScripting, however do we have sample login script so that I can use that script with modifications. Sorry I am new to dovecot. Thanks and Regards.

1 0

[Dovecot] lmtp log message
by Daniel L. Miller 29 Jul '12

29 Jul '12

I just tried switching to lmtp from lda. Messages are being delivered, but I now see messages similar to: Jul 26 22:59:21 bubba dovecot: lmtp(20508): Disconnect from local: Client quit (in reset) in my log for every message. Is this a normal sign-off - or does this indicate a misconfiguration? -- Daniel

4 6

[Dovecot] Problem with preserving MIME format with Dovecot IMAP and Outlook
by Peter Grimmond 29 Jul '12

29 Jul '12

Hello, I have installed Dovecot 2.0.19 on Ubuntu 12.04 LTS. I have set up a very basic IMAP configuration. I have two different laptops running Outlook (one MacOS, one Windows 7) and I have configured both to connect to the Dovecot service. My problem is, emails in MIME format that I synchronise from one Outlook client are not being correctly decoded as MIME messages on the other client. Instead, the message is rendered in plaintext, starting with the lines: This message is in MIME format. Since your mail reader does not understandthis format, some or all of this message may not be legible. --B_3426360453_22814Content-type: multipart/alternative; boundary="B_3426360453_4099" --B_3426360453_4099Content-type: text/plain; charset="ISO-8859-1"Content-transfer-encoding: quoted-printable Can anyone help me understand why this might be happening? The output from dovecot -n is: # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-26-generic-pae i686 Ubuntu 12.04 LTS auth_debug = yes auth_verbose = yes disable_plaintext_auth = no mail_location = maildir:~/Maildir passdb { driver = pam } protocols = " imap" ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } Thanks! PG ___ Peter Grimmond E:peter@grimmond.org M:+44 7770 963352

1 0

Re: [Dovecot] expire-tool stops on first box with nothing to expire in it
by Joseph Tam 28 Jul '12

28 Jul '12

Michael Wessel writes: > When I run for example: > > doveadm -D search -A mailbox Trash savedbefore 60d > /tmp/discard I previously observed that the "date.saved" field (tested by savedbefore) seems to be clustered around particular timestamps. Dumping out this field using doveadm -ftab fetch -A \ "mailbox date.saved" \ $ mailbox Trash OR mailbox Junk OR mailbox "Deleted Items" $ it seems the timestamps do not actually correspond to when the client moves messages to their trash folder, but rather, to the time I query for it i.e. a query instantiates this value. This timestamp is then retained. In practice, if this query is done on a periodic interval (e.g. daily), the date.saved will be roughly correct, and is usable as an age test for expungement. Is there a way to force this value to be cached when the client actually saves or moves a message? Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] [PATCH] Pop3/imap ordering in courier-dovecot-migrate.pl
by Pavel Stano 28 Jul '12

28 Jul '12

Hi, current version of courier migration script courier-dovecot-migrate.pl preserve order of POP3 UIDLs, but it keep IMAP UIDs not in order which cause problems with clients using IMAP along with POP3 in some cases. Attached patch use MAIL_FETCH_POP3_ORDER feature added in version 2.0.13 to keep POP3 and IMAP UID[L]s in order. -- [ Ohodnotte kvalitu mailu: http://nicereply.com/websupport/4afafd34/ ] Pavel Stano | admin team http://WebSupport.sk *** TAKE AND ENJOY ***

2 1

Re: [Dovecot] Disable W=<vsize> in filenames
by Daniel Pieper 28 Jul '12

28 Jul '12

I implemented a plugin for dovecot and now i got a error that maildir filename has wrong W value. When i rename the filename manually and delete the W value, all is ok.

2 1

[Dovecot] Dsync replication
by list＠airstreamcomm.net 28 Jul '12

28 Jul '12

I have been loosely following discussions dsync replication, but I am wondering if this tool still in a testing phase or has it been committed as a production part of Dovecot? I would like to do some testing with the protocol to see if it's capable of handling the change rate our mail service generates, which has about 23,000 active users. We are trying to find solutions for a two site setup where mail processing is either being done at the primary data center A and fails over to a hot standby cluster at the secondary data center B, or where both data centers are doing active processing. I have been unable to find documentation on dsync replication on the wiki, so if there is any documentation available on how to setup dsync replication I would appreciate a nudge in the right direction.

4 6

[Dovecot] get recipient entry while in the zlib plugin context
by Tofig Suleymanov 28 Jul '12

28 Jul '12

Hello, is it possible to get a recipient of an email while being in the zlib plugin context ? Thank you ! -----BEGIN PGP PUBLIC KEY BLOCK----- mQINBE9zuXMBEADG8O1eZpo8gxMFcQ2Bf4K/n2MvDoH5WDnffvLQcswkigKedicz lNNQzMTsk31gH8Hkl3upEK1jd0yfAmB20puITl52Mlzm3Xe6p8JDDZdKBppIaZI+ E0sin1ff/OBn/BPsPQjvCa92kOvm8Km118Wph3mUtQM4kZlMvxWSLWye1l9SUO0b Ou8zbuL0+5YaUABz57BGfJZDMHLORaeJMu3OVty4cpVBZl1Cn6aHNBbTlXK+w6vu 8N0VoDMtoXje2XIuBYhT9e5A104Sl40IU0Uh9K1dwRyyQhqKyUIoBzNMweyWCtN/ qFn2Idp3h48Wca4g2rAnY5jNaihDEL2T/a/aL5jLoLXrzz6bO6Jm1i/NqY932juJ KupcBN6mpMGLStG6/aTw9JC2oggszg2CT8Qu7HdAPweSbbBpH16VCsDgPqfEqOht +ByUUBGjvnVA95MhifUH+ZRaz2LVxgw5s9Hnh3pKVUmx7634MY0YlnS1FTc7ys9E aQWMwwTWGd09qNPMtawwKyMRzkf/m84N8+mnOEGmzMliEPGX+1t5vZ7TBQ+DCvBL HZ4XIKXtQG2of6nbyDbwu9RNWDRyvDCzXqyeoUdqnmTqWyaDyT942uaw59DPx9A7 1+lrAT3iNdBzFnSvYoNwHJ0yCOEbSRYXZKZ9fJClZ9m6ruKEKpC9mmNjFQARAQAB tCNUb2ZpZyBTdWxleW1hbm92IDx0b2ZpZ0BmcmVlYnNkLmF6PokCPwQTAQIAKQUC T3O5cwIbLwUJB4YfgAcLCQgHAwIBBhUIAgkKCwQWAgMBAh4BAheAAAoJEOMBSob+ wYEq8v8P+gJbkfc1sO/AdmWwZDqpyfG+NWQE9nj8gAlngblexX6qowzdBdupZ/1/ BW4qJhZxhY18cVwvF8NdBCTqWDb1iZ1j3zhw69zJdbd3tfqBIRFEeZY48limbIxH 9AcknRKdD+xomjDMbhzIunkYE79Sx3yUAsbB6wqaOvspa1bz9pBEwvGonKJzMBWc 28ieHTNZGaPJurBLlX/ED7N7ZtSflDZhH8wXIWgzdiQrkBRkKrW0J74xkh2EFm9p 82KCnadnukoNGplzdQsj2bODJkpJclz3QvjsyQhwfJdGCJMjgJPoPCT4kwQkABPy IP8tpVHEsZ1UxJG/PsUIV4D1Q8Nypsecx9OrxSdjeBI6JsuuKR2/At9dB2obVNO/ fnhS5WSsNmezrFyKgi3OWcLPwFyItVcVzhzydTvgLIzwH5uJ/w3hFVv45e2ZVReH M05OZCtj4AeTo/WIf8uJCOx1eGMoyy3X7rbzzyt9gSMeuHaKrLIGPZVddI24GZND ZXnlfhZPQvbmj4fjvaQd3Ayy1F8LcziWOT5OmSm12R/GdDKqo0dy646dTKVgka8+ nRGwyMeFGDeMFvZfIURP+efos/KDU8q1KufIHWGt06sGQa8nqakJ555kdlleS9Ol fX08WdgTm4wVEXIc5uXOUm6YVZ/05TZDnHBIIsUug3M0OeGviSSvuQINBE9zuXMB EAC5GRrh23AXpIG6OE8geROcscUhnU7mORAxxfjV6OLN30DLkkmMpGEUz3yRR2ma qRMKyJYtPTpoHqA4j8l7yh+G/ModSg7LToEilGQ8EoKKbSays9s6AtmgSgcLDp8c k8AvlByrMT1lBWIK5sOGlPDbEhYiAkYQbJutQyNRuSSMACFaqKeCqSbp+mJEx2co ODQXD8c8+RA5utL2r5T6NrmTv00s62TEEkTcbHDrXE5PuyxEsa1isnDWK58RjQZE EKjwO0WOlres8PA/EagVNQ6N65auF5jV7eOpgzUu8HCtLLv+OzhVpnTxWAaqlHnd A/B/FS+EtykPq+khE8rFGAWRvYCdmTZhWJg/ku8WAfBCdi9euhNn0t+TjuCam2Rt FquuF0O5+W+8RZLGBdL/NSS66RhyKOW+iO4kVmiUvmTLCFhk0ycsCh8+VgVDtL2y aq6USlJJkZ5F40hkv2JcoNltE5A1B+jbmqT2nLm1qrEEpEhkRJUrINn3GxwrcN3V WzP2tn6fE/0IMTBOAUg8oQ3Okc6IeURINSGkuY2b3SCUSWOmiAB0zL0NaK3vfM92 mKKrceqtRX1AvmOXVVv1ipvP9E5/cwwyTfds4QUaasX3eocF5ZNrAbEX0cCKj3NV C3hGwE/nRjUIsEIp3mJfPcEvppGr1JV3rmgv1UbdF6JvSwARAQABiQREBBgBAgAP BQJPc7lzAhsuBQkHhh+AAikJEOMBSob+wYEqwV0gBBkBAgAGBQJPc7lzAAoJEOf4 16JuYcl6If0P/1ihpZipRHxionQh7454OszRNXtaUa4Wxa8HCnYu6fA5VywerkBP Xnr1Tn70AMNaKiUCc9iLC2L9LdYjXn+lgE2R69AGJGfJnFl3rcvCvCUE0AXV0wBR bdLaWOQ3U++H2U1W9l7E0GcZie8+31IYaQCRjsJsE5w9cWDIaSqEcydkfb/bvp4o Mi8Qj/yQzwOYariilKoIpsdxpwVf1fL9OAk7J/fuyzz+dCypC0kCMjS0ooATkU0s Q7soNh+ZsHNg/Nw91eXsRotwgyErSNK8seoaZzzTLKhdO7SVFta8Ko+ad+KbwiKe n4RHaCssHmf1tgKh2Do+xc9FZz9nXMgf7dCLjD6cExyvVNGjy4ybgRp+C3i3R8e4 CVrRfc6XfjljfQ/2GDH4SVBZ3RGSxW7J4iKhnO7tg4pC1fDdUqriGG6OUrDDuiix xllCdGXlABJQV015wii0LrXtWZPU+oUE/6YmBYCDCHjNRkLW5WfxNzpcSNj8Be5U mGARwmdliXILUsGYglKVSkrk6Pxr6U0WDVSViC28iIo1wvDobPlyZmH0Hw9JXMr6 Rg39j8lrKtxF6x6ElBjrJLmn2XKOXOW6gsjlxlpD/eRxi3YYBDApnTKTd+86GX7X VCLDyEc4ZXYnxEiO5GvSPeiV8LtFVaaefGi3uViMUHMy3FCWRd5Dw/rRagIP/iW9 vRPTdAKY/foYpht/VJGp4N20u25W7oohJbfm/gbPLuKPB/wvQWpt2tf1ImJB2ufG 7GEJ9uPDnEuLxV2cdp0bQOQR4DiqJxXlBeSEeQlxJXVElUztGB/z3Z/CLeCGdVf/ XoCHVdSek+VkZrOY+1VJYo1Q89Z9eAMZAcRyfUUVpcTygy3ay/7Ja+tVvmc3/kHj HUp+OgKKOv170r85MKeeJtm9gakwcuTQTrJ5fTzIUr+DRJyQuxJw5VnF0Gb0VmKq ymjV92Th6sFzoKEGWfBcqbUatlkVR7bGc8tXuk5beIZwVzUwaJiBMLSWXHWO/tFW hKCilLFJ4lewC39ykH0iRDB6dzBSHbcmThpZwG1ZTXHA+AYCd79PmeQimGwKkMGs sgeLEE09ULKdhCML2DhScW6mdM9QqvWfQyA6YMgdI9LsG9aktPOA08lb8SN30P8C 8k2/4DSlIZdwSiKPDlBtfBpA43I4c76DtRZc0knlo+drwZvCZMbu6CCs3gW0ZkZs v5qmkDopG83bysq5ll+pytRRDx2Uzmd6jOXnTE3EFKUjuOUalHIF7NJJIv9lTcon Nb4rYu3KdOkilj06jAQWbHPgk4yI+ZOr95Vu5vbLd2Ft+06Af1UhbIJ5wY2Mkh/q CDhxA3vBoOulljNRUn6iwNSSxAeWekYw+ULUapL0 =wxyH -----END PGP PUBLIC KEY BLOCK-----

2 1

[Dovecot] fts-lucene vs SEARCH HEADER
by Matthew Powell 28 Jul '12

28 Jul '12

Hello. This is in Dovecot 2.1.7 on Linux x86, but it looks as though 2.1.8 has the same issue. I'm using fts-lucene. SEARCH HEADER TO returns no results, but SEARCH TO works: B SEARCH TO TEST * SEARCH 1 2 3 4 5 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 26 27 28 29 31 B OK Search completed (0.000 secs). C SEARCH HEADER TO TEST * SEARCH C OK Search completed (0.000 secs). Without FTS enabled, both forms of the query work. It looks as though the header names are indexed in lower case. But Dovecot is passing the header name to the backend in upper case when SEARCH HEADER is used. I'm not sure whether this is the *right* fix, but lower-casing the header name in lucene-wrapper.cc seems to fix the problem: --- dovecot-2.1.7-clean/src/plugins/fts-lucene/lucene-wrapper.cc 2011-12-13 06:35:29.000000000 -0500 +++ dovecot-2.1.7/src/plugins/fts-lucene/lucene-wrapper.cc 2012-07-24 14:03:14.000000000 -0400 @@ -1094,7 +1094,7 @@ return false; q = lucene_get_query(index, - t_lucene_utf8_to_tchar(index, arg->hdr_field_name, FALSE), + t_lucene_utf8_to_tchar(index, t_str_lcase(arg->hdr_field_name), FALSE), arg); break; default: Now: B SEARCH TO TEST * SEARCH 1 2 3 4 5 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 26 27 28 29 31 B OK Search completed (0.000 secs). C SEARCH HEADER TO TEST * SEARCH 1 2 3 4 5 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 24 26 27 28 29 31 C OK Search completed (0.000 secs). -- Matthew Powell matthew(a)atom.net

2 1

[Dovecot] Re move .INBOX from folders.
by ssukh 28 Jul '12

28 Jul '12

Hello all, i am just new to dovecot and trying to figure out how to remove .INBOX from the folders. Now all the folders are created like .INBOX.spam .INBOX.temp But i would like to have .spam .temp so on. Result of doveconf -v -------------------------------------------------------------------------------- # 2.1.8: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-220.23.1.el6.x86_64 x86_64 CentOS release 6.2 (Final) auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@& auth_verbose = yes default_login_user = dovecot disable_plaintext_auth = no listen = * login_greeting = Dovecot DA ready. mail_access_groups = mail mail_location = maildir:~/Maildir namespace { inbox = yes list = yes location = prefix = separator = . subscriptions = yes type = private } passdb { driver = shadow } passdb { args = username_format=%n /etc/virtual/%d/passwd driver = passwd-file } protocols = imap pop3 service auth { user = root } service imap-login { process_min_avail = 16 user = dovecot } service pop3-login { process_min_avail = 16 user = dovecot } ssl_cert = </etc/httpd/conf/ssl.crt/server.crt ssl_cipher_list = ALL:!ADH:RC4+RSA:+HIGH:+MEDIUM:-LOW:-SSLv2:-EXP ssl_key = </etc/httpd/conf/ssl.key/server.key userdb { driver = passwd } userdb { args = username_format=%n /etc/virtual/%d/passwd driver = passwd-file } verbose_proctitle = yes protocol pop3 { pop3_logout_format = top=%t/%p, retr=%r/%b, del=%d/%m, size=%s, bytes=%i/%o pop3_uidl_format = %08Xu%08Xv } protocol imap { mail_max_userip_connections = 1024 } -------------------------------------------------------------------- Thanks -- View this message in context: http://old.nabble.com/Remove-.INBOX-from-folders.-tp34217400p34217400.html Sent from the Dovecot mailing list archive at Nabble.com.

2 1

[Dovecot] Auto logging-out client
by Nicolás 28 Jul '12

28 Jul '12

Hi list! I'm writing because of an issue I'm having with my Postfix-Dovecot installation. Everything's working fine but when an IMAP client is idle for some time, Dovecot automatically logs it out. Jul 26 14:01:16 mail dovecot: imap(nicolas(a)devels.es): Disconnected: Logged out bytes=1271/7439 This entails errors when trying to send e-mails after this auto logout, such as: host devels.es[91.215.158.237] said: 550-Please turn on SMTP Authentication in your mail client, or login to the 550-IMAP/POP3 server before sending your message. Which result in a very annoying and continuous proccess of restarting my mail client. Is there a way to avoid this auto-logout, or at least configure the time after I want idle clients to auto-logout? Thank you very much! Nicolás

3 2

[Dovecot] Slightly OT - Winbind and remote authentication.
by Simon Brereton 28 Jul '12

28 Jul '12

Hi I was doing some research on setting up a samba server for my internal network (as an alternative to NAS). The setup looks easy enough, but then I got to thinking - I already have an internet host with an mysql DB that has usernames and passwords and it would be simpler all round to reuse that as the authentication server. That server is also running Dovecot, so I thought it might be simpler still to set up samba to authenticate using IMAP (the mysql server is not accessible on port 3306 anyway). A quick google resulted in a suggestion from Robert (who by now must be on every single list I'm on or rather vice-versa) about using winbind. I went off to the link he posted - http://wiki.dovecot.org/Authentication/Mechanisms/Winbind?highlight=%28winb… and the problem is that seems to indicate bind and dovecot are on the same server. So, this not being the samba list notwithstanding, is it possible to use a remote dovecot host as an authentication back-end on a local samba installation? Cheers Simon

2 1

[Dovecot] Problem overriding default quota limit
by RAUL JAREÑO MORAGO 28 Jul '12

28 Jul '12

Hi, We get user's quota limit from LDAP. It works fine when user has quota attribute in LDAP (this is when it's different from default quota). But when user doesn't have quota limit attribute Dovecot doesn't take default value defined in quota plugin and assign unlimit quota to user. Our configuration is similar to the example from wiki ( http://wiki2.dovecot.org/Quota/Configuration ). This is the plugin configuration _plugin {_ _ quota = maildir:User quota_ _ quota_rule = *:storage=1G_ _ .........._ _}_ And this is the recovered fields in LDAP search: _user_attrs = mailMessageStore=home,mailquotasize=quota_rule=*:bytes=%$_ It works if user has mailquotasize in its LDAP entry. But if it hasn't it Dovecot assign 0 instead of *:STORAGE=1G This is the log when LTMP deliver a mail to a user without mailquotasize attribute: _auth: Debug: master in: USER#0111#011eepp68#011service=lmtp#011lip=172.31.100.120#011lport=24#011rip=172.31.100.119#011rport=41452_ _auth: Debug: userdb-cache(eepp68,172.31.100.119): miss_ _auth: Debug: ldap(eepp68,172.31.100.119): user search: base=o=Junta de Castilla-La Mancha,c=ES scope=subtree filter=(uid=eepp68) fields=mailMessageStore,MAILQUOTASIZE_ _auth: Debug: ldap(eepp68,172.31.100.119): result: mailMessageStore=/buzones1/e/eepp68; MAILQUOTASIZE MISSING_ _auth: Debug: master out: USER#0111#011eepp68#011home=/buzones1/e/eepp68#011QUOTA_RULE=*:BYTES=_ _lmtp(8235): Debug: auth input: eepp68 home=/buzones1/e/eepp68 quota_rule=*:bytes=_ _lmtp(8235): Debug: Added userdb setting: plugin/quota_rule=*:bytes=_ _lmtp(8235, eepp68): Debug: Effective uid=11184, gid=2110, home=/buzones1/e/eepp68_ _lmtp(8235, eepp68): Debug: Quota root: name=User quota backend=maildir args=_ _lmtp(8235, eepp68): Debug: Quota rule: root=User quota mailbox=* bytes=0 messages=0_ I tried it with defining default_fields in userdb but I get the same result: _userdb {_ driver = ldap args = /etc/dovecot/dovecot-ldap-lmtp.conf.ext default_fields = quota_rule=*:bytes=1073741824 } If I don't recover mailquotasize (user_attrs = mailMessageStore=home) Dovecot assign default quota limit, so it works in this case: auth: Debug: master in: USER#0111#011eepp68#011service=lmtp#011lip=172.31.100.120#011lport=24#011rip=172.31.100.119#011rport=41427 auth: Debug: userdb-cache(eepp68,172.31.100.119): miss auth: Debug: ldap(eepp68,172.31.100.119): user search: base=o=Junta de Castilla-La Mancha,c=ES scope=subtree filter=(uid=eepp68) fields=mailMessageStore auth: Debug: ldap(eepp68,172.31.100.119): result: mailMessageStore=/buzones1/e/eepp68 auth: Debug: master out: USER#0111#011eepp68#011home=/buzones1/e/eepp68 lmtp(8198): Debug: auth input: eepp68 home=/buzones1/e/eepp68 lmtp(8198, eepp68): Debug: Effective uid=11184, gid=2110, home=/buzones1/e/eepp68 lmtp(8198, eepp68): Debug: Quota root: name=User quota backend=maildir args= lmtp(8198, eepp68): Debug: Quota rule: root=User quota mailbox=* bytes=1073741824 messages=0 Any idea about where is the problem? This is my LDAP configuration for LTMP: hosts = xxx.xxxx.es:389 dn = ........ dnpass = xxxxxxx ldap_version = 3 base = o=mibase,c=ES user_attrs = mailMessageStore=home,mailquotasize=quota_rule=*:bytes=%$ user_filter = (uid=%u) And this is my Dovecot configuracion: # 2.1.1: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-279.1.1.el6.x86_64 x86_64 CentOS release 6.3 (Final) auth_cache_size = 20 M auth_debug = yes auth_verbose = yes base_dir = /var/run/dovecot/ default_internal_user = vmail default_process_limit = 200 disable_plaintext_auth = no dotlock_use_excl = no hostname = correo.jccm.es lda_mailbox_autocreate = yes login_greeting = Correo jccm.es mail_debug = yes mail_fsync = always mail_gid = 2110 mail_location = maildir:~/Maildir:INDEX=/var/dovecot/index/%n mail_nfs_storage = yes mail_plugins = " quota" mail_uid = 11184 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave vnd.dovecot.pipe vnd.dovecot.execute mbox_write_locks = fcntl mmap_disable = yes namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = INBOX. separator = . type = private } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { quota = maildir:User quota quota_rule = *:storage=1G quota_warning = storage=80%% quota-warning 80 %n sieve = ~/.dovecot.sieve sieve_execute_bin_dir = /repositorio/paulo/scripts/sieve/extprograms sieve_extensions = +vnd.dovecot.execute +vnd.dovecot.pipe sieve_filter_bin_dir = /repositorio/paulo/scripts/sieve/extprograms sieve_pipe_bin_dir = /repositorio/paulo/scripts/sieve/extprograms sieve_plugins = sieve_extprograms } postmaster_address = postmaster(a)jccm.es protocols = imap pop3 lmtp sieve rejection_reason = Tu mensaje enviado a fue automaticamente rechazado:%n%r rejection_subject = Rechazado: %s service imap-login { process_min_avail = 10 service_count = 0 } service imap-postlogin { drop_priv_before_exec = yes executable = script-login /repositorio/paulo/scripts/dovecot/migrar-postlogin.sh user = $default_internal_user } service lmtp { inet_listener lmtp { port = 24 } } service pop3-login { service_count = 0 } service pop3-postlogin { drop_priv_before_exec = yes executable = script-login /repositorio/paulo/scripts/dovecot/migrar-postlogin.sh user = $default_internal_user } service quota-warning { executable = script /repositorio/paulo/scripts/postfix-quota-warning.sh unix_listener quota-warning { user = vmail } user = dovecot } ssl_cert =

2 3

Re: [Dovecot] Problem overriding default quota limit
by RAUL JAREÑO MORAGO 28 Jul '12

28 Jul '12

Hi Daniel, The "userdb" ldap is in this section: protocol lmtp { mail_plugins = " quota sieve" userdb { args = /etc/dovecot/dovecot-ldap-lmtp.conf.ext driver = ldap } } And dovecot-ldap-lmtp.conf.ex contains this: hosts = xxx.xxx.es:389 dn = uid=xxxxx,o=xxxxxx,c=es dnpass = xxxxxxxxxxx ldap_version = 3 base = o=xxxxxxxxxxxx,c=ES user_attrs = mailMessageStore=home,mailquotasize=quota_rule=*:bytes=%$ user_filter = (uid=%u) A las Viernes, 27-07-2012 en 2:34 Daniel Parthey escribió: Hi Raul, Raul Jareño Morago wrote: > We get user's quota limit from LDAP. It works fine when user has > quota attribute in LDAP (this is when it's different from default > quota). But when user doesn't have quota limit attribute Dovecot > doesn't take default value defined in quota plugin and assign unlimit > quota to user. > Our configuration is similar to the example from wiki ( > http://wiki2.dovecot.org/Quota/Configuration ). This is the plugin > configuration > > plugin { > quota = maildir:User quota > quota_rule = *:storage=1G > } > > And this is the recovered fields in LDAP search: > > user_attrs = > mailMessageStore=home,mailquotasize=quota_rule=*:bytes=%$ > > It works if user has mailquotasize in its LDAP entry. But if it hasn't > it Dovecot assign 0 instead of *:STORAGE=1G > > This is the log when LTMP deliver a mail to a user without > mailquotasize attribute: > > _auth: Debug: ldap(eepp68,172.31.100.119): result: > mailMessageStore=/buzones1/e/eepp68; MAILQUOTASIZE MISSING LDAP Entry for mailquotasize is missing... so far so good. > auth: Debug: master out: USER#0111#011eepp68#011home=/buzones1/e/eepp68#011QUOTA_RULE=*:BYTES= > lmtp(8235): Debug: auth input: eepp68 home=/buzones1/e/eepp68 quota_rule=*:bytes= > lmtp(8235): Debug: Added userdb setting: plugin/quota_rule=*:bytes= Here comes the interesting part, ldap "userdb" has returned "QUOTA_RULE=*:BYTES=" and this empty value seems to correspond to 0 Bytes as you can read from the resulting Quota rule: > lmtp(8235, eepp68): Debug: Quota rule: root=User quota mailbox=* bytes=0 messages=0 The "bytes=..." value should be different from 0. http://wiki2.dovecot.org/Quota/Configuration#LDAP states that user_attrs is used only if you use userdb ldap. Where is the "userdb" ldap in your doveconf -n output and where do you get the user information like quota from? > Any idea about where is the problem? The default is not taken since your LDAP query returns a quota_rule with an empty bytes= value when the mailquotasize entry is missing. Regards Daniel -- https://plus.google.com/103021802792276734820

2 1

[Dovecot] emails are being marked as read auto-magically
by Joe Beaubien 28 Jul '12

28 Jul '12

Hi, I'm having a weird issue with dovecot 2.1.7 (using the latest thunderbird client). Something, I have emails that mark themselves as read on their own. No one touches them, and they get marked as read. I try to re-mark them as unread, but a few seconds later, they get marked as read again. The same problem happens in reverse (emails marks as unread become read). Has anyone ever experienced anything similar? I cannot see any warnings or errors in the dovecot logs, so I'm not sure if the problem is with thunderbird or with dovecot. However, I have never had this issue before switching from dovecot 1.0.X to dovecot 2.1.X. Unfortunately, we updated the thunderbird versions around the same time, so I feel like a dog chasing my tail on this issue. Any help would be appreciated. Regards, -Joe

3 2

Re: [Dovecot] Dovecot configuration changes
by Joseph Tam 28 Jul '12

28 Jul '12

> From: Rups2603 <shewalkar.rupesh(a)gmail.com> > > I planning to migrate my Mail server by IRedmail automatic > configuration shell script,but my some of Users using pine as Mail user > agent.(First They login to Mailserver using SSH with own User Name & > Password which is same as mail UserID & PASSWORD & then they do Pine). > > In IRedmail Their is single mail management user vmail,so How I > will change dovecot setting in IRedmail so it will fit in my setup >From your brief description, you're going from a virtual user setup to a real user setup, with perhaps direct file access to boot (otherwise, you don't need users to be able to log in to the mail server), in which case, IMAP/POP may be irrelevant. I don't think anybody can give you any concrete idea of how to change your dovecot setup without a lot more information. It appears to me you'll have to do a clean re-do of your dovecot setup, using your old configuration as a reference. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] about dovecot quota ,i will crazy!
by fy 27 Jul '12

27 Jul '12

Hi ALL: my SQL: user_query=select concat('*bytes=',trim(TRAILING 'S' FROM quota)) as quota_rule,concat('/home/data/domains/',maildir) as mail ,conca t('/home/data/domains/',homedir) as home,uidnumber as uid,gidnumber as gid from mailbox where username='%u' password_query= select username as user ,password,uidnumber as userdb_uid,gidnumber as userdb_gid,concat('*bytes=',trim(TRAILING 'S' FROM quota)) as userdb_quota_rule from mailbox where username='%u' And quota : plugin { quota = maildir:User quota } I got this Error for debug: Jul 27 10:26:13 mail dovecot: imap-login: Login: user=<fy(a)5dshu.com>, method=PLAIN, rip=123.65.246.154, lip=123.65.246.151, mpid=11407, session=<pwBJftDFHQB7Qfaa> Jul 27 10:26:13 mail dovecot: imap: Debug: Loading modules from directory: /usr/lib/dovecot/modules Jul 27 10:26:13 mail dovecot: imap: Debug: Module loaded: /usr/lib/dovecot/modules/lib10_quota_plugin.so Jul 27 10:26:13 mail dovecot: imap: Debug: Added userdb setting: mail=/home/data/domains/5dshu.com/fy/Maildir/ Jul 27 10:26:13 mail dovecot: imap: Debug: Added userdb setting: plugin/quota_rule=*bytes=52428800 Jul 27 10:26:13 mail dovecot: imap(fy(a)5dshu.com): Debug: Effective uid=1000, gid=1000, home=/home/data/domains/5dshu.com/fy Jul 27 10:26:13 mail dovecot: imap(fy(a)5dshu.com): Debug: Quota root: name=User quota backend=maildir args= Jul 27 10:26:13 mail dovecot: imap(fy(a)5dshu.com): Error: user fy(a)5dshu.com: Initialization failed: Failed to initialize quota: Invalid quota root quota: Invalid rule *bytes=52428800: Invalid rule Jul 27 10:26:13 mail dovecot: imap(fy(a)5dshu.com): Error: Invalid user settings. Refer to server log for more information ___________________ Jul 27 10:25:22 mail dovecot: lda: Debug: Added userdb setting: mail=/home/data/domains/5dshu.com/fy/Maildir/ Jul 27 10:25:22 mail dovecot: lda: Debug: Added userdb setting: plugin/quota_rule=*bytes=52428800 Jul 27 10:25:22 mail dovecot: lda(fy(a)5dshu.com): Debug: Effective uid=1000, gid=1000, home=/home/data/domains/5dshu.com/fy Jul 27 10:25:22 mail dovecot: lda(fy(a)5dshu.com): Debug: Quota root: name=User quota backend=maildir args= Jul 27 10:25:22 mail dovecot: lda(fy(a)5dshu.com): Error: user fy(a)5dshu.com: Initialization failed: Failed to initialize quota: Invalid quota root quota: Invalid rule *bytes=52428800: Invalid rule Jul 27 10:25:22 mail dovecot: lda(fy(a)5dshu.com): Fatal: Invalid user settings. Refer to server log for more information. Jul 27 10:25:22 mail postfix/pipe[11384]: B3860322100: to=<fy(a)5dshu.com>, relay=dovecot, delay=2.3, delays=2.3/0/0/0.03, dsn=4.3.0, status=deferred (temporary failure) What is problem by config?? pls give help , To this question I have been working for a few days . Thank you so much! fy

2 1

Re: [Dovecot] Auto logging-out client
by Nicolás 27 Jul '12

27 Jul '12

El 27/07/2012 13:37, lists-dovecot escribió: > > ------------ Original Message ------------ >> Date: Friday, July 27, 2012 12:53:16 PM +0100 >> From: Nicolás <nicolas(a)devels.es> >> To: dovecot(a)dovecot.org >> Subject: Re: [Dovecot] Auto logging-out client >> >> El 26/07/2012 15:22, lists-dovecot escribió: >>> ------------ Original Message ------------ >>>> Date: Thursday, July 26, 2012 02:58:12 PM +0100 >>>> From: Nicolás <nicolas(a)devels.es> >>>> To: dovecot(a)dovecot.org >>>> Subject: [Dovecot] Auto logging-out client >>>> >>>> Hi list! >>>> >>>> I'm writing because of an issue I'm having with my >>>> Postfix-Dovecot installation. Everything's working fine but when >>>> an IMAP client is idle for some time, Dovecot automatically logs >>>> it out. >>>> >>>> Jul 26 14:01:16 mail dovecot: imap(nicolas(a)devels.es): >>>> Disconnected: Logged out bytes=1271/7439 >>>> >>>> This entails errors when trying to send e-mails after this auto >>>> logout, such as: >>>> >>>> host devels.es[91.215.158.237] said: >>>> 550-Please turn on SMTP Authentication in your mail client, >>>> or login to the >>>> 550-IMAP/POP3 server before sending your message. >>>> >>>> Which result in a very annoying and continuous proccess of >>>> restarting my mail client. >>>> >>>> Is there a way to avoid this auto-logout, or at least configure >>>> the time after I want idle clients to auto-logout? >>>> >>>> Thank you very much! >>>> >>>> Nicolás >>>> >>>> >>>> >>> I would suggest that you configure the smtp submission port >>> facility on your mail server and set your imap/pop clients to >>> send that way. The "pop before sending" approach is a fairly old >>> and broken hack (including submitting via port 25, which is >>> frequently blocked by connectivity providers). >>> >>> With sendmail the submission port option is basically configured >>> by default. I don't know about postfix, but I suspect it is there >>> too. >>> >>> >>> >>> - Richard >>> >>> >> Thanks for your responses! >> >> I just tried configuring the submission port on postfix but the >> problem persists even sending by port 587. >> >> About what Harald said, I guess I initially missed the point of >> the problem, it was just my conclusion because that error happens >> always after the logout message appears, and SMTP authentication >> is set on my client, so I deduced the problem had something to do >> with the logout thing. The curious thing is it just happens with >> SMTP, not with POP3/IMAP protocols. >> >> Thanks again! >> >> Nicolás > You indicate that you configured the submission port, but did you > configure the imap/pop client to use it? I.e., explicitly set/change > the send options on the client, including having it use port 587 and > explicitly giving it the id/pw for authenticating against that > service? > > - Richard > > Hi, Yes, I've changed the config on the client too, but now I'm not 100% sure it's working well. I've just configured a client with SMTP port 587, but the line in the log shows still be using port 25: Jul 27 13:53:31 mail postfix/smtp[27598]: B16EF1008D0: to=<postfixtries(a)gmail.com>, relay=*devels.es[91.215.158.237]:25*, delay=0.7, delays=0.11/0.08/0.3/0.21, dsn=2.0.0, status=sent (250 OK id=1Suk2y-0003P3-Tq) Is that the correct behavior? Any additional ideas of why could this problem be happening? Thanks so much for your help! Nicolás

2 1

Re: [Dovecot] Auto logging-out client
by Nicolás 27 Jul '12

27 Jul '12

El 26/07/2012 15:22, lists-dovecot escribió: > > ------------ Original Message ------------ >> Date: Thursday, July 26, 2012 02:58:12 PM +0100 >> From: Nicolás <nicolas(a)devels.es> >> To: dovecot(a)dovecot.org >> Subject: [Dovecot] Auto logging-out client >> >> Hi list! >> >> I'm writing because of an issue I'm having with my Postfix-Dovecot >> installation. Everything's working fine but when an IMAP client is >> idle for some time, Dovecot automatically logs it out. >> >> Jul 26 14:01:16 mail dovecot: imap(nicolas(a)devels.es): >> Disconnected: Logged out bytes=1271/7439 >> >> This entails errors when trying to send e-mails after this auto >> logout, such as: >> >> host devels.es[91.215.158.237] said: >> 550-Please turn on SMTP Authentication in your mail client, >> or login to the >> 550-IMAP/POP3 server before sending your message. >> >> Which result in a very annoying and continuous proccess of >> restarting my mail client. >> >> Is there a way to avoid this auto-logout, or at least configure >> the time after I want idle clients to auto-logout? >> >> Thank you very much! >> >> Nicolás >> >> >> > I would suggest that you configure the smtp submission port facility > on your mail server and set your imap/pop clients to send that way. > The "pop before sending" approach is a fairly old and broken hack > (including submitting via port 25, which is frequently blocked by > connectivity providers). > > With sendmail the submission port option is basically configured by > default. I don't know about postfix, but I suspect it is there too. > > > > - Richard > > > Thanks for your responses! I just tried configuring the submission port on postfix but the problem persists even sending by port 587. About what Harald said, I guess I initially missed the point of the problem, it was just my conclusion because that error happens always after the logout message appears, and SMTP authentication is set on my client, so I deduced the problem had something to do with the logout thing. The curious thing is it just happens with SMTP, not with POP3/IMAP protocols. Thanks again! Nicolás

1 0

[Dovecot] Question abous ecs
by Adrian Stoica 27 Jul '12

27 Jul '12

Hello, Do you consider using /Envelope/-/Content Splitting/ (ECS) in dovecot ? http://en.wikipedia.org/wiki/Envelope-content_splitting Thanks Adrian Stoica

2 1

[Dovecot] Dovecot configuration changes
by Rups2603 27 Jul '12

27 Jul '12

Dear all, I planning to migrate my Mail server by IRedmail automatic configuration shell script,but my some of Users using pine as Mail user agent.(First They login to Mailserver using SSH with own User Name & Password which is same as mail UserID & PASSWORD & then they do Pine). In IRedmail Their is single mail management user vmail,so How I will change dovecot setting in IRedmail so it will fit in my setup Please see my dovecot configuration http://old.nabble.com/file/p34219004/dovecot.conf dovecot.conf http://old.nabble.com/file/p34219004/dovecot-ldap.conf dovecot-ldap.conf -- View this message in context: http://old.nabble.com/Dovecot-configuration-changes-tp34219004p34219004.html Sent from the Dovecot mailing list archive at Nabble.com.

1 0

[Dovecot] Sieve & Adding headers.
by Steven Haigh 26 Jul '12

26 Jul '12

Hi all, I've just migrated my mail system from procmail to managesieve/sieve and I'm having trouble trying to duplicate a could of rules I used to use in my procmail config. One particular rule would be this: :0 Wfh * ^Sender: owner-scientific-linux-devel(a)LISTSERV.FNAL.GOV | (sed -e '/^Subject:/ s/\[SCIENTIFIC-LINUX-DEVEL\] *//g'| sed ':a;N;$!ba;s/Precedence: list/Precedence: list\nList-Post: <mailto:scientific-linux-devel@fnal.gov>/g') :0 A .Mail\ Lists.SL-Devel/ This in effect adds the header "List-Post: <mailto:scientific-linux-devel@fnal.gov>" after "Precedence: list". This allows me to use the Reply To List functionality in Thunderbird. Another rule is: :0 Wfh * ^X-BeenThere: users(a)lists.repoforge.org | sed -e '/^Subject:/ s/\[users\] *//g' :0 A .Mail\ Lists.RPMForge/ This removes the [users] tag from the subject of each message to the RPMForge / RepoForge mailing lists. Is there a way to do this with sieve? Nothing I have seen seems to do this - however I'm only a beginner in this area. Please CC myself as well as the list. I'm not currently subscribed. -- Steven Haigh Email: netwiz(a)crc.id.au Web: http://www.crc.id.au Phone: (03) 9001 6090 - 0412 935 897 Fax: (03) 8338 0299

2 6

Re: [Dovecot] Auto logging-out client
by Reindl Harald 26 Jul '12

26 Jul '12

FIRST: do not top-post and NOT reply off-list (no i refuse to repair the thread) if he would know that these are different things hewould not write "This entails errors when trying to send e-mails after this auto logout" NO, NO and NO - this entails NOT sending errors! Am 26.07.2012 16:41, schrieb Hans J Albertsson: > Mr Reindl > > Of course Nicolas knows these are different issues! > He wants to know how to avoid the first issue, and merely points out why he desperately wants that fix. > > Skickat från min Samsung Mobil > > Reindl Harald <h.reindl(a)thelounge.net> skrev: > > > Am 26.07.2012 15:58, schrieb Nicolás: >> Hi list! >> >> I'm writing because of an issue I'm having with my Postfix-Dovecot installation. Everything's working fine but when >> an IMAP client is idle for some time, Dovecot automatically logs it out. >> >> Jul 26 14:01:16 mail dovecot: imap(nicolas(a)devels.es): Disconnected: Logged out bytes=1271/7439 >> >> This entails errors when trying to send e-mails after this auto logout, such as: >> >> host devels.es[91.215.158.237] said: >> 550-Please turn on SMTP Authentication in your mail client, or login to the >> 550-IMAP/POP3 server before sending your message. >> >> Which result in a very annoying and continuous proccess of restarting my mail client. > > errors while send messages have really nothing to do with > any imap-timeout/logout, these are completly different > things! > -- Reindl Harald the lounge interactive design GmbH A-1060 Vienna, Hofmühlgasse 17 CTO / CISO / Software-Development p: +43 (1) 595 3999 33, m: +43 (676) 40 221 40 icq: 154546673, http://www.thelounge.net/ http://www.thelounge.net/signature.asc.what.htm

1 0

[Dovecot] Remove leading and trailing spaces from folder names?
by Ralf Hildebrandt 26 Jul '12

26 Jul '12

Hi! Anybody got a doveadm script which can remove leading and trailing spaces from folder names? Right now we're migrating mailboxes from dovecot -> Exchange, and Exchange cannot handle leading and trailing spaces in Folder names. -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

13 36

Re: [Dovecot] lock file strangeness
by Joseph Tam 26 Jul '12

26 Jul '12

> From: "McGraw, Robert P" <rmcgraw(a)purdue.edu> > > We are running dovecot-1.2.10 on a Solaris 10 x86 host. > > Starting on July 24 I started seeing the following type lock files I the > /var/mail directory. > > -rw-rw-rw- 1 agab mail 0 Jul 24 10:08 > agabriel.lock.1343138908.28535.hardy.purdue.edu Hmm, are you sure these are dovecot locks? They look sort of like what alpine would produce. Do your clients have direct filesystem access to the INBOX spool? Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] lock file strangeness
by McGraw, Robert P 25 Jul '12

25 Jul '12

We are running dovecot-1.2.10 on a Solaris 10 x86 host. Starting on July 24 I started seeing the following type lock files I the /var/mail directory. -rw-rw-rw- 1 agab mail 0 Jul 24 10:08 agabriel.lock.1343138908.28535.hardy.purdue.edu -rw-rw-rw- 1 agab mail 0 Jul 24 10:08 agabriel.lock.1343138907.28535.hardy.purdue.edu -rw-rw-rw- 1 agab mail 0 Jul 24 10:08 agabriel.lock.1343138906.28535.hardy.purdue.edu -rw-rw-rw- 1 agab mail 0 Jul 24 10:08 agabriel.lock.1343138905.28535.hardy.purdue.edu They are being created by only three of our users. What is common with the three users is that they are using alpine mail client. Again these just started on July 24. We have over 300 user and a lot of them use alpine but only three users seem to generate these lock files. Can some one tell me what and why these are being created and why they are not getting destroyed? Thanks Robert _____________________________________________________________________ Robert P. McGraw, Jr. Manager, Computer System EMAIL: rmcgraw(a)purdue.edu Purdue University ROOM: MATH-807 Department of Mathematics PHONE: (765) 494-6055 150 N. University Street West Lafayette, IN 47907-2067

2 1

[Dovecot] what best for anti-spam filter?
by fy 25 Jul '12

25 Jul '12

what anti-spam for you used ? dspam?spammassian? amavisd-new ? what is best ?

22 50

[Dovecot] help about quota config
by fy 25 Jul '12

25 Jul '12

hi all : mysql mailbox below : CREATE TABLE `mailbox` ( `username` varchar(255) NOT NULL DEFAULT '', `uid` varchar(255) NOT NULL DEFAULT '', `password` varchar(255) NOT NULL DEFAULT '', `clearpwd` varchar(128) NOT NULL DEFAULT '', `name` varchar(255) NOT NULL DEFAULT '', `mailhost` varchar(255) NOT NULL DEFAULT '', `maildir` varchar(255) NOT NULL DEFAULT '', `homedir` varchar(255) NOT NULL DEFAULT '', `quota` varchar(16) NOT NULL DEFAULT '0', `netdiskquota` varchar(16) NOT NULL DEFAULT '0', `domain` varchar(255) NOT NULL DEFAULT '', `uidnumber` int(6) NOT NULL DEFAULT '1000', `gidnumber` int(6) NOT NULL DEFAULT '1000', `createdate` datetime NOT NULL DEFAULT '0000-00-00 00:00:00', `expiredate` date NOT NULL DEFAULT '0000-00-00', `active` smallint(1) NOT NULL DEFAULT '1', `disablepwdchange` smallint(1) DEFAULT NULL, `disablesmtpd` smallint(1) DEFAULT NULL, `disablesmtp` smallint(1) DEFAULT NULL, `disablewebmail` smallint(1) DEFAULT NULL, `disablenetdisk` smallint(1) DEFAULT NULL, `disableimap` smallint(1) DEFAULT NULL, `disablepop3` smallint(1) DEFAULT NULL, `question` text NOT NULL, `answer` text NOT NULL, PRIMARY KEY (`username`), KEY `username` (`username`) ) ENGINE=MyISAM DEFAULT CHARSET=latin1 COMMENT='ExtMail - Virtual Mailboxes' dovecot config below : root@mail:/etc/dovecot# dovecot -n # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-686 i686 Debian 6.0.5 ext3 log_path: /var/log/dovecot.log log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s managesieve listen(default): * listen(imap): * listen(pop3): * listen(managesieve): *:2000 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_privileged_group: mail mail_uid: vuser mail_gid: vgroup mail_location: maildir:/home/data/domains/%d/%n/Maildir mail_debug: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugins(default): quota mail_plugins(imap): quota mail_plugins(pop3): quota mail_plugins(managesieve): mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve managesieve_logout_format(default): bytes=%i/%o managesieve_logout_format(imap): bytes=%i/%o managesieve_logout_format(pop3): bytes=%i/%o managesieve_logout_format(managesieve): bytes(in=%i/out=%o) lda: postmaster_address: fy(a)5dshu.com mail_plugins: sieve quota mail_plugin_dir: /usr/lib/dovecot/modules/lda auth_socket_path: /var/run/dovecot/auth-master auth default: mechanisms: plain login verbose: yes debug: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 384 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vuser group: vgroup plugin: quota: dict:user::proxy::quota sieve_dir: /home/data/domains/%d/%n/sieve sieve: /home/data/domains/%d/%n/.dovecot.sieve dict: quota: mysql:/etc/dovecot/dovecot-dict-sql.conf /etc/dovecot/dovecot-dict-sql.conf file : connect = host=localhost dbname=extmail user=root password=bamwei map { pattern = priv/quota/storage table = mailbox username_field = username value_field =quota } map { pattern = priv/quota/messages table = mailbox username_field = username value_field = uid } in the dovecot-sql.conf: user_query= SELECT homedir AS home, maildir, uidnumber AS uid, gidnumber AS gid ,CONCAT( '*:storage=', quota, 'B' ) AS quota_rule FROM mailbox WHERE username ='%u' password_query= SELECT username,domain,password,homedir AS home, maildir, uidnumber AS uid, gidnumber AS gid, CONCAT( '*:storage=', quota, 'B' ) AS userdb_quota_rule FROM mailbox WHERE username ='%u' when is seting quota_rule=*:storage=10M:messages=1000 in plugin quote, all user get 10MB quota. when i comment it .quota no enable . i see the http://wiki1.dovecot.org/Quota/Dict ,but unknow to get Correct setup...thanks ! fy

1 0

[Dovecot] deleted-to-trash plugin problems
by Steve Platt 24 Jul '12

24 Jul '12

We have a user who wants to use Outlook with our Dovecot IMAP server but doesn't like the way Outlook handles deletion with IMAP. Ironically she would like Outlook to move the message to her Trash folder, just like Outlook does with "local" folders, I guess. So I enabled the "deleted-to-trash" plugin (v0.3) on our Dovecot 1.2.17 server (built for SPARC, solaris 10, btw). The problem is that it doesn't seem to work; the message doesn't even appear to get marked for delete. The imap log says: "opening Trash succeeded" and then nothing else! I have found that there is a copy of the message in .Trash/tmp/ suggesting that the plugin may be bailing out part way through. Has anyone any idea what's wrong please? I'll attach the output of dovecot -n ... Thanks, Steve

3 2

Re: [Dovecot] what best for anti-spam filter?
by Joseph Tam 24 Jul '12

24 Jul '12

Morten Stevens <mstevens(a)imt-systems.com> writes: > So it is now RFC compliant. Anyway I think delaying mail traffic is not > a good solution. Well, OK, if you not keen on greylisting, you can try greet pausing, which introduces a shorter delay. It tests a bot's patience by inserting a pre-HELO pause. RFC allows 5 minutes before timeout. This is last week's stat for one of my mail server and the count of early-talker or early-disconnecter, almost all of which are bots. A greet pause of over 20s dumps a lot of bots. Expect to whitelist the odd server here and there because they've tuned their servers to some aggressively small RFC non-compliant timeouts. Delay Disconnect/early-talkers 00 = 9 01 = 1 02 = 1 03 = 11 04 = 34 05 = 5 06 = 1 07 = 1 08 = 3 09 = 3 10 = 9 11 = 1 12 = 2 16 = 7 17 = 10 18 = 4 19 = 17 20 = 1161 21 = 431 22 = 61 23 = 43 24 = 13 Joseph Tam <jtam.home(a)gmail.com>

3 2

[Dovecot] Fwd: official dev team position regarding multiple times requested feature (global sieve)
by mailing list subscriber 24 Jul '12

24 Jul '12

forwarding to the proper list address since your reply came with a Reply-To header ---------- Forwarded message ---------- From: mailing list subscriber <mailinglists35(a)gmail.com> Date: Tue, Jul 24, 2012 at 10:24 AM Subject: Re: official dev team position regarding multiple times requested feature (global sieve) To: awilliam(a)opengroupware.us On Mon, Jul 23, 2012 at 11:47 PM, Adam Tauno Williams <awilliam(a)opengroupware.us> wrote: > On Mon, 2012-07-23 at 23:26 +0300, mailing list subscriber wrote: >> With above figure in mind, I'm looking at the history of request for >> ability to have a forced, default, site-wide sieve script that the >> user or any other sieve client is unable to alter (I'll just pick most >> relevant): > > Indeed, this would be terribly useful. > >> 2004, with reference to 2001: >> http://goo.gl/Gbo0k >> 2006: A submitted patch >> http://www.irbs.net/internet/info-cyrus/0612/0231.html >> 2007: A very good synthesis: >> http://goo.gl/Lo33b >> 2010: sieve include implemented in v.2.3.0, still fails to meet above >> requirements > > But you fail to reference an open bug?! > The page at http://cyrusimap.web.cmu.edu/mediawiki/index.php/Report_A_Bug says: "If you are absolutely positive you have discovered a bug[...]". This might be misleading since this is a feature request and not a bug. Leaving the technical details of the proper way to report this I'm still curios if the developers are actually AWARE of these repeated requests. >> With all due respect, what is the development's team position >> regarding this feature and how do the development team see a solution >> that meets both requirements? > > I find "SIEVE scripts assigned to folders are not executed" > <https://bugzilla.cyrusimap.org/show_bug.cgi?id=3617> > > "People forget to cancel their vacation message" > <https://bugzilla.cyrusimap.org/show_bug.cgi?id=2985> > NOTE: this is really a UI issue, IMO, multiple web clients solve this by > generating intelligent scripts. That's another problem with the poor IT guy trying to assemble bricks from different vendors: when he finally is heard, the answer is "uhm, the feature you requested fail beyond the scope of my brick. I'm sorry, I can't do that", even when there is a proposed patch available! If you read carefully all my referenced links you'll find one that is listing other imap servers that support it. From what I've tested, at least one implementation has done this as a global pre-user execution of a script (dovecot) > > I don't see any bugs about a default-user-sieve-script. *BUT* > imapd.conf does offer this option [IMPLEMENTED]: > autocreate_sieve_script: <none> > The full path of a file that contains a sieve script. This script > automatically becomes a user’s initial default sieve filter script. > When this option is not defined, no default sieve filter is created. > The file must be readable by the cyrus daemon. > > Of course, the user can override this. Unfortunately that feature only addresses PROVISIONING of data, which is quite unuseful since cyrus mail admins do this with the auto-* uoa.gr patches (that's another pain that devs refused to include for a long time) - What it lacks is the ability to handle CHANGE (change of default script, or alter existing user scripts).

2 2

[Dovecot] Couple of questions about the logs
by Steve Campbell 23 Jul '12

23 Jul '12

The log entries for imap disconnection shows a "bytes = x/y" format where the x equals bytes sent from client and y equals bytes received from client. Can someone explain that a little better to me, please? In an imap account, does this "y" represent the size of the header information being returned to the client or the amount of data of the email mailbox? Also, is there a way to tell if an email has been deleted (or marked for deletion) when using an imap client? Here's the situation: I've got a user who uses imap when using his phone and webmail. When in the office, he uses a pop3 client on his desktop. He indicates he's missing some emails from the weekend when first turning on his desktop. I know of no way to discover if he's deleted and then purged email from his mailbox using imap clients. I've checked the logs and he does not access his mailbox simultaneously from any of the 3 clients. I can find 31 emails he received since his last pop login on Friday until his first pop login on Monday. The pop login indicates he received only 27 emails during the pop retrieval. I'm a little lost here. Any help would be appreciated in interpreting the logs or suggesting how this might have happened. thanks steve campbell

2 4

[Dovecot] dovecot 2.x via xinetd
by Mathieu Roy 23 Jul '12

23 Jul '12

Hello, I was using dovecot 1.2.x via xinetd with a setup like http://wiki.dovecot.org/InetdInstall Since I upgraded to Debian Wheezy, shipping dovecot 2.x, it no longer works. At best, I end up with stuff like Error: net_connect_unix(anvil) failed: No such file or directory Fatal: Couldn't connect to anvil Any clues? Regards, (add me in Cc in replies, I'm not suscribed to the list) # doveconf -n # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-3-amd64 x86_64 Debian wheezy/sid ext4 mail_location = maildir:/home/%n/.Maildir:LAYOUT=fs mail_privileged_group = mail namespace inbox { inbox = yes location = prefix = } passdb { driver = pam } protocols = " imap" ssl_cert = </etc/dovecot/certs/cert-gate.crt ssl_key = </etc/dovecot/certs/cert-gate.key userdb { driver = passwd } -- Mathieu Roy

4 7

[Dovecot] about .dovecot.sieve file can't found for directory
by F.Y 23 Jul '12

23 Jul '12

Hi all : i used roundcube webmail and enable filter(managesieve) . i create some rules ,and the rule save in maildir . ok ..see my dovecot config: # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-686 i686 Debian 6.0.5 ext3 log_path: /var/log/dovecot.log log_timestamp: %Y-%m-%d %H:%M:%S protocols: imap imaps pop3 pop3s managesieve listen(default): * listen(imap): * listen(pop3): * listen(managesieve): *:2000 disable_plaintext_auth: no login_dir: /var/run/dovecot/login login_executable(default): /usr/lib/dovecot/imap-login login_executable(imap): /usr/lib/dovecot/imap-login login_executable(pop3): /usr/lib/dovecot/pop3-login login_executable(managesieve): /usr/lib/dovecot/managesieve-login mail_privileged_group: mail mail_uid: vuser mail_gid: vgroup mail_location: maildir:/home/data/domains/%d/%n/Maildir mail_debug: yes mbox_write_locks: fcntl dotlock mail_executable(default): /usr/lib/dovecot/imap mail_executable(imap): /usr/lib/dovecot/imap mail_executable(pop3): /usr/lib/dovecot/pop3 mail_executable(managesieve): /usr/lib/dovecot/managesieve mail_plugin_dir(default): /usr/lib/dovecot/modules/imap mail_plugin_dir(imap): /usr/lib/dovecot/modules/imap mail_plugin_dir(pop3): /usr/lib/dovecot/modules/pop3 mail_plugin_dir(managesieve): /usr/lib/dovecot/modules/managesieve managesieve_logout_format(default): bytes=%i/%o managesieve_logout_format(imap): bytes=%i/%o managesieve_logout_format(pop3): bytes=%i/%o managesieve_logout_format(managesieve): bytes(in=%i/out=%o) lda: postmaster_address: fy(a)5dshu.com mail_plugins: sieve mail_plugin_dir: /usr/lib/dovecot/modules/lda auth_socket_path: /var/run/dovecot/auth-master auth default: mechanisms: plain login verbose: yes debug: yes passdb: driver: sql args: /etc/dovecot/dovecot-sql.conf socket: type: listen client: path: /var/spool/postfix/private/auth mode: 384 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 user: vuser group: vgroup plugin: sieve_dir: /home/data/domains/%d/%n/Maildir/sieve sieve: /home/data/domains/%d/%n/Maildir/.dovecot.sieve I create some rules, it can save for Maildir/sieve ,but can't found .dovecot.sieve on Maildir.. i trying for google and baidu search engine,can't found any help .

2 1

[Dovecot] ot: execute a script via email?
by Voytek Eymont 22 Jul '12

22 Jul '12

anyone has any tips what's best way to execute a script via email ? I have a wget script that fetches some pages, and, emails me the output, there is no paramters passed, it's all in the script I'll like to email in and action the script to get the results email -- Voytek

5 16

[Dovecot] Upgrade Problem from 2.0.18 to 2.1.7
by Michael Domann 22 Jul '12

22 Jul '12

hi there, i'm running a debian wheezy in a chroot at a fritzbox 7230, running with freetz. Running well until the upgrade of version 2.1.7 from debian repros comming up. after upgrade, the server comes up, but login is not possible. Jul 20 20:13:46 master: Warning: Killed with signal 15 (by pid=15309 uid=0 code=kill) Jul 20 20:13:46 master: Info: Dovecot v2.1.7 starting up (core dumps disabled) Jul 20 20:14:15 lda: Debug: Loading modules from directory: /usr/lib/dovecot/modules Jul 20 20:14:15 lda: Debug: Loading modules from directory: /usr/lib/dovecot/modules Jul 20 20:14:15 lda: Debug: Module loaded: /usr/lib/dovecot/modules/lib90_sieve_plugin.so Jul 20 20:14:15 lda(mdomann): Debug: Effective uid=1000, gid=1000, home=/home/mdomann Jul 20 20:14:15 lda: Debug: Module loaded: /usr/lib/dovecot/modules/lib90_sieve_plugin.so Jul 20 20:14:15 lda(mdomann): Debug: Namespace : type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/home/mdomann/Mail:LAYOUT=fs Jul 20 20:14:15 lda(mdomann): Debug: fs: root=/home/mdomann/Mail, index=, control=, inbox=/home/mdom ann/Mail, alt= Jul 20 20:14:15 lda(mdomann): Debug: Effective uid=1000, gid=1000, home=/home/mdomann Jul 20 20:14:15 lda(mdomann): Debug: Namespace : type=private, prefix=, sep=, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/home/mdomann/Mail:LAYOUT=fs Jul 20 20:14:15 lda(mdomann): Debug: fs: root=/home/mdomann/Mail, index=, control=, inbox=/home/mdom ann/Mail, alt= Jul 20 20:14:15 lda(mdomann): Debug: userdb lookup skipped, username taken from USER environment Jul 20 20:14:15 lda(mdomann): Debug: none: root=, index=, control=, inbox=, alt= Jul 20 20:14:15 lda(mdomann): Debug: userdb lookup skipped, username taken from USER environment Jul 20 20:14:15 lda(mdomann): Debug: none: root=, index=, control=, inbox=, alt= Jul 20 20:14:16 lda(mdomann): Debug: Destination address: mdomann(a)fritz.fonwlan.box (source: user@ho stname) Jul 20 20:14:16 lda(mdomann): Debug: Destination address: mdomann(a)fritz.fonwlan.box (source: user@ho stname) Jul 20 20:14:16 lda(mdomann): Debug: sieve: include: sieve_global_dir is not set; it is currently no t possible to include `:global' scripts. Jul 20 20:14:16 lda(mdomann): Debug: sieve: include: sieve_global_dir is not set; it is currently no t possible to include `:global' scripts. Jul 20 20:14:16 lda(mdomann): Debug: sieve: using sieve path for user's script: /home/mdomann/.dovec ot.sieve Jul 20 20:14:16 lda(mdomann): Debug: sieve: using sieve path for user's script: /home/mdomann/.dovec ot.sieve Jul 20 20:14:16 lda(mdomann): Debug: sieve: opening script /home/mdomann/.dovecot.sieve Jul 20 20:14:16 lda(mdomann): Debug: sieve: opening script /home/mdomann/.dovecot.sieve Jul 20 20:14:16 lda(mdomann): Debug: sieve: script binary /home/mdomann/.dovecot.svbin successfully loaded Jul 20 20:17:15 imap: Error: dovecot/imap: error while loading shared libraries: libpthread.so.0: failed to map segment from shared object: Cannot allocate memory Jul 20 20:17:15 imap: Fatal: master: service(imap): child 22594 returned error 127 Jul 20 20:17:15 master: Error: service(imap): command startup failed, throttling for 2 secs Jul 20 20:17:15 imap-login: Error: read(imap) failed: Connection reset by peer Jul 20 20:17:15 imap-login: Info: Internal login failure (pid=22586 id=1) (internal failure, 1 succesful auths): user=<mdomann>, method=PLAIN, rip=192.168.2.105, lip=192.168.2.1, TLS, session=<gHEKlUjFNQDAqAJp> the libary is still there fritz:~# ldd /usr/sbin/dovecot libdovecot.so.0 => /usr/lib/dovecot/libdovecot.so.0 (0x2aaaa000) libc.so.6 => /lib/mips-linux-gnu/libc.so.6 (0x2ab48000) libdl.so.2 => /lib/mips-linux-gnu/libdl.so.2 (0x2accc000) librt.so.1 => /lib/mips-linux-gnu/librt.so.1 (0x2ace0000) /lib/ld.so.1 (0x55550000) libpthread.so.0 => /lib/mips-linux-gnu/libpthread.so.0 (0x2acfa000) the ulimit i have tried, but without success. root@fritz:/var/mod/root# ulimit -a -f: file size (blocks) unlimited -t: cpu time (seconds) unlimited -d: data seg size (kb) unlimited -s: stack size (kb) unlimited -c: core file size (blocks) unlimited -m: resident set size (kb) unlimited -l: locked memory (kb) unlimited -p: processes unlimited -n: file descriptors 16384 -v: address space (kb) unlimited -w: locks unlimited fritz:~# dovecot -n # 2.0.18: /etc/dovecot/dovecot.conf # OS: Linux 2.6.28.10 mips Debian wheezy/sid squashfs base_dir = /var/run/dovecot/ default_client_limit = 100 default_process_limit = 50 default_vsz_limit = 6 M disable_plaintext_auth = no lda_mailbox_autocreate = yes listen = * log_path = /var/log/dovecot login_greeting = Dovecot on sysiphus ready. mail_debug = yes mail_gid = 1000 mail_location = maildir:/home/mdomann/Mail:LAYOUT=fs mail_uid = 1000 namespace { hidden = no inbox = yes list = yes location = prefix = subscriptions = yes type = private } passdb { args = scheme=CRYPT username_format=%u /etc/dovecot/users driver = passwd-file } plugin { mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_global_path = /etc/dovecot/dovecot.sieve } postmaster_address = mdomann@localhost protocols = " imap" service anvil { client_limit = 210 } service auth-worker { user = $default_internal_user } service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } unix_listener auth-userdb { group = mdomann mode = 0777 user = mdomann } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } service_count = 1 } service lmtp { unix_listener lmtp { mode = 0666 } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem syslog_facility = debug userdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } verbose_proctitle = yes protocol lda { mail_plugins = " sieve" syslog_facility = mail } protocol imap { imap_client_workarounds = tb-extra-mailbox-sep imap_idle_notify_interval = 24 mins mail_max_userip_connections = 20 } root@fritz:/var/mod/root# free -m total used free shared buffers Mem: 59512 52260 7252 0 2452 -/+ buffers: 49808 9704 Swap: 538608 8116 530492 I have no idea to solve this. The question is, is it possible a bug in debian wheezy mips or in dovecot. Hopefully someone can point me in the right direction. thanks and regards micha

4 5

[Dovecot] Performance based choices
by Hans J. Albertsson 22 Jul '12

22 Jul '12

I've stopped trying to find a HowTo that suits me right away, and instead I am happily trudging thru the Dovecot wiki, article by article. I have right up front thought of one question, a general one, and some detailed versions of that same question: Generally, is there much general performance and reliability background data available for making the basic choices? Say: 1st. delivery: maildrop or LDA or LMTP? I tend to think LMTP should be the ideal choice for me, from what I've gleaned so far. Above all it means that there's only one conceptual thing that needs to know, and postfix and other stuff can safely let dovecot deal with accessing and finding mailboxes. And it won't start and stop thousands of processes. 2nd. mailbox format: Maildir and mbox are the older forms. Are there any advantages to using dovecot's dbox instead? mdbox strikes me as having the potential for being a fast and reliable format. Is that an accurate impression? And, is mdbox mature enough for me to forget maildir and mbox? 3rd. I'm aiming for a poor man's High Availability system: I'm using zfs, and I'm hoping to place all config data for dovecot and postfix and everything else in one zfs file system, and all the user owned data (what should normally go in a home directory) in another (or two or three other) zfs file systems. Then I'm planning to copy over all data at regular intervals, to a second, normally passive, mail server. If the main server breaks, we'll manually (or using scripts and autodetection) fail over to the passive one, making it active, and turning power off to the failed guy using IPMI. The data transfer is to be zfs send/zfs recv over a separate highly redundant network connection. Is this a reasonable idea, or is there some advantage to letting dsync do some of the copying??? Or is there some totally different alternative? iscsi? 4th. With about a thousand users/accounts: does MySQL pay off? Or is LDAP the way to go? Or will a dovecot-specific passwd-file do the job well enough? Those are the three I'm used to since before. I'd like to stay with the flat file, but not the system password file: we're not going to let users in except into dovecot.

2 1

[Dovecot] Corrupted dbox file - purging found mismatched offsets
by Daniel Parthey 22 Jul '12

22 Jul '12

Hi, we are running a cluster using mdbox on NFS with director+mailbox on each node. After running our daily doveadm purge loop over all users, we got dbox corruption... doveadm user "*" |\ while read username do doveadm -c /etc/dovecot-director/dovecot-director.conf -D purge -u "$username" done For one user (which deleted a lot of messages from his mailboxes today), we got the following error in the dovecot.log: Jul 22 20:10:36 10.129.3.213 dovecot: doveadm(user(a)example.org): Error: Corrupted dbox file /mail/dovecot/example.org/user/mail/storage/m.24 (around offset=1380859): purging found mismatched offsets (1380829 vs 920527, 3/61) Jul 22 20:10:36 10.129.3.213 dovecot: doveadm(user(a)example.org): Warning: mdbox /mail/dovecot/example.org/user/mail/storage: rebuilding indexes What does this message exactly tell me and how to prevent this in the future? Now the indexes are broken and flags are lost. The "storage" directory content of the affected user looks as follows: drwx------ 2 vmail vmail 4096 2012-07-22 20:10 . drwx------ 4 vmail vmail 4096 2012-05-06 12:16 .. -rw------- 1 vmail vmail 99008 2012-07-22 20:10 dovecot.map.index -rw------- 1 vmail vmail 33016 2012-07-22 20:10 dovecot.map.index.log -rw------- 1 vmail vmail 34664 2012-07-22 20:10 dovecot.map.index.log.2 -rw------- 1 vmail vmail 8134 2012-05-16 11:36 m.22 -rw------- 1 vmail vmail 10572466 2012-06-02 23:09 m.24 -rw------- 1 vmail vmail 1380205 2012-05-27 10:59 m.24.broken -rw------- 1 vmail vmail 6506837 2012-06-09 15:42 m.25 -rw------- 1 vmail vmail 18201641 2012-06-17 22:50 m.26 -rw------- 1 vmail vmail 11345293 2012-07-01 14:37 m.28 -rw------- 1 vmail vmail 36707787 2012-07-08 23:05 m.29 -rw------- 1 vmail vmail 6062419 2012-07-15 23:34 m.30 -rw------- 1 vmail vmail 52396198 2012-07-22 20:10 m.31 -rw------- 1 vmail vmail 3067862 2012-07-20 14:31 m.32 -rw------- 1 vmail vmail 44520965 2012-07-20 14:31 m.33 -rw------- 1 vmail vmail 52426605 2012-07-22 20:10 m.34 -rw------- 1 vmail vmail 28984844 2012-07-22 20:10 m.35 -rw------- 1 vmail vmail 14465248 2012-07-22 20:10 m.36 -rw------- 1 vmail vmail 37451127 2012-07-22 20:10 m.37 -rw------- 1 vmail vmail 41494033 2012-07-22 20:10 m.38 -rw------- 1 vmail vmail 52066924 2012-07-22 20:10 m.39 -rw------- 1 vmail vmail 49785529 2012-07-22 20:10 m.40 -rw------- 1 vmail vmail 23509886 2012-07-22 20:10 m.41 -rw------- 1 vmail vmail 29339462 2012-07-22 20:10 m.42 -rw------- 1 vmail vmail 29510420 2012-07-22 20:10 m.43 -rw------- 1 vmail vmail 50896380 2012-07-22 20:10 m.44 -rw------- 1 vmail vmail 8331046 2012-07-22 20:10 m.45 -rw------- 1 vmail vmail 5903744 2012-07-22 20:10 m.46 -rw------- 1 vmail vmail 70281 2012-07-22 20:10 m.47 -rw------- 1 vmail vmail 27397909 2012-07-22 20:10 m.48 -rw------- 1 vmail vmail 3893509 2012-07-22 20:10 m.49 -rw------- 1 vmail vmail 1410097 2012-07-22 20:10 m.50 -rw------- 1 vmail vmail 1905759 2012-07-22 20:10 m.51 -rw------- 1 vmail vmail 51783968 2012-05-06 12:12 m.9 Any hints on how to prevent dbox corruption in this case? And what should I do with the "m.24.broken" file now? Regards Daniel -- https://plus.google.com/103021802792276734820

1 0

[Dovecot] Confusion when trying to set up a first postfix+dovecot mailserver
by Hans J. Albertsson 22 Jul '12

22 Jul '12

I'm trying to set up a first test for a dovecot + postfix (+ many other things) mail server for about 1000 accounts, and I keep stumbling on confusing inconsistencies in the HowTo documents I'm trying to follow. I tried to do a simple setup with virtual users using a howto saying it was for just that and that it's for Dovecot 2.x, and it shows a few text chunks to put in files, and then says it's better to do the changes in the example-config conf file.... And then the whole structure of config files and dirs is totally different from what is implied in the howto. And of course it won't run. Probably because of the structure of a conf.d dir is multiple files, and the instructions are explicitly written for the case of having a single conf file. Can anyone suggest an order in which to read docs that will take me thru w/o being totally confusing? I would very much like to be able to enable bit by bit, rather than have to understand all of dovecot before I can even begin to test it. P.S: I want to setup a server using postfix+dovecot+tls+virtualusers+maildir+dspam+mailman, at least that's the target I'm aiming for. Please suggest a good HowTo for this setup that will not be too confusing. Also, Sorry if I sound like a whining kid: I am new to dovecot and postfix, but I was a software support engineer for Sun for ages, and I should really be able to manage this if I just had some consistent and non-confusing HowTo or Tutorial to follow as a first try.

3 8

[Dovecot] Director for smtp-auth
by Patrick Westenberg 22 Jul '12

22 Jul '12

Hi all, isn't it possible to use the director functionality for smtp-auth too? I have a frontend system for imap and outgoing mails using sasl and I recognized that all sasl username/password combinations are accepted as these credentials aren't checked by the backend servers. Regards Patrick

2 2

[Dovecot] postfix/sendmail configuration
by Gary Partis 20 Jul '12

20 Jul '12

Hi all I have searched the net and cant find anything relating to this. In 15-lda.conf, the default sendmail is used to send messges from Dovecot, such as "out of hours" and "redirected" emails controlled by sieves. However, postfix/sendmail is looking in /etc/postfix/main.cf for the configuration file (as logged in /var/log/maillog), but I have the config file elsewhere, and I even have MAIL_CONFIG setup to point to the true config directory. Is there a method of setting 15-lda.conf sendmail config to ensure it uese the correct postfix config file? Thanks in advance Gary

2 1

Re: [Dovecot] Converting from Maildir format ?
by Nick＠5sg.eu 20 Jul '12

20 Jul '12

Hi Stan, >> I'm still trying to find out if anyone knows the correct >> way to either switch the existing Maildir multiple file >> format to the single file format I believe known as MBox. > Did you restart dovecot after the mailbox_location change? Yup... > Show 'dovecot -n' output It shows it - and 'plugin: convert_mail: mbox:%h/%u/mail' I also changed it in dovecot/conf.d/01-dovecot-postfix.conf Hi Charles, > format known as dbox Running v1.2.9 on Ubuntu v10.4 > The wiki/docs are pretty thorough for basic settings. That's where I got the mbox line above.. Thanks gentlemen, Nick. . . . . -- _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ . . . . . . . . ...---... (Stamp Out Spam and Save Our Servers) http://sosNow.ws -=[ do you know morse code ? ]=- . . . . . . . . _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/

3 2

[Dovecot] Append with literal+ and mailbox over quota
by Ewald Dieterich 19 Jul '12

19 Jul '12

I'm appending a mail with literal+ to a mailbox that is over quota: 1 APPEND INBOX {127+} From: <ewald.dieterich(a)fun.de> To: <ewald.dieterich(a)fun.de> Subject: Quota-Test Message-ID: <abcdefg(a)fun.de> Quota-Test 1 NO [OVERQUOTA] Quota exceeded (mailbox for user is full) 2 NOOP 1 BAD Error in IMAP command APPEND: Invalid arguments. 3 NOOP 3 OK NOOP completed. Somehow the first NOOP is considered to be part of the already failed APPEND. I have to add an empty line after to NO response for the NOOP to work: 1 APPEND INBOX {127+} From: <ewald.dieterich(a)fun.de> To: <ewald.dieterich(a)fun.de> Subject: Quota-Test Message-ID: <abcdefg(a)fun.de> Quota-Test 1 NO [OVERQUOTA] Quota exceeded (mailbox for user is full) 2 NOOP 2 OK NOOP completed. Can somebody confirm this to be bug? Here is the output of doveconf -n # 2.1.8: /usr/local/dovecot-orig/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.3 ext3 auth_debug = yes auth_verbose = yes debug_log_path = /var/log/dovecot/debug.log disable_plaintext_auth = no info_log_path = /var/log/dovecot/info.log log_path = /var/log/dovecot/error.log mail_debug = yes mail_location = mdbox:/var/spool/dovecot/%2.256Hu/%3.4096Hu/%u mail_plugins = notify mail_log quota acl namespace { inbox = yes location = prefix = INBOX. separator = . type = private } passdb { driver = pam } plugin { acl = vfile autocreate = INBOX.Drafts autocreate2 = INBOX.Sent autocreate3 = INBOX.Trash quota = dict:User quota::file:/var/spool/dovecot/%2.256Hu/%3.4096/%u/dovecot.dict quota_rule = *:bytes=2000 } ssl = no userdb { driver = passwd } protocol imap { mail_plugins = notify mail_log quota acl autocreate imap_quota imap_acl

1 1

[Dovecot] Disable W=<vsize> in filenames
by Daniel Pieper 19 Jul '12

19 Jul '12

Hi, I'm using Dovecot 2.1.8. Is it possible to deactivate the "W=" Maildir filename extension, so that dovecot not add it to maildir filenames?

2 1

[Dovecot] Converting from Maildir format ?
by Nick＠5sg.eu 19 Jul '12

19 Jul '12

Hi again, I'm still trying to find out if anyone knows the correct way to either switch the existing Maildir multiple file format to the single file format I believe known as MBox. Failing that, though it'll mean a LOT of work for me to manually convert all of the existing Maildirs, how do I get dovecot to work in future in MBox single file format. I tried entering 'mail_location = mbox:~/mail:INBOX=/%h/%u' in the 'dovecot.conf', but it still saves each message in a file of its own in the /new /cur /tmp directories ?? Thanks, Nick. . . . . -- _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ . . . . . . . . ...---... (Stamp Out Spam and Save Our Servers) http://sosNow.ws -=[ do you know morse code ? ]=- . . . . . . . . _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/

3 2

[Dovecot] Make a whole mailbox read-only
by Sandro Tosi 19 Jul '12

19 Jul '12

Hello, i've found an old thread [1] where it was stated that a whole mailbox can be made read-only only setting the according permissions on the filesystem side. [1] http://www.mailinglistarchive.com/html/dovecot@dovecot.org/2011-12/msg00300… i'd like to check if it's still the only option we have with dovecot v2.0.18 . Regards, -- Sandro Tosi Product Engineer Shared Hosting Products R&D | Dada.pro eml sandro.tosi(a)register.it

3 5

Re: [Dovecot] Issues with Plus addressing and detail part of subaddress.
by Sean Kamath 19 Jul '12

19 Jul '12

On Jul 17, 2012, at 3:18 AM, Charles Marcus wrote: >> I really thought it would be a simple "here's what you missed", since >> the logs are relatively uninformative... > > The point is, what may appear to be uninformative to you may tell Timo (or someone else who knows what to look for) all they need to know to pinpoint the problem. Whilst I would normally agree, at the same time I've had a fair amount of experience with dovecot and sendmail (been running them for over 10 years). Pigeonhole is new to me, however. . . > One thing I did notice is that you are sending this mail from an internal IP... since most people use very different checks for such mail (bypassing many/most checks), maybe you should be testing from an external address (one that comes in from outside your network)? So I have a DMZ that houses the mail server for my domain, which is where the private addresses are. Connections are passed through the OpenBSD router to the mail server. So testing from an external address would be essentially the same (since the connection to the SMTP server talks to the sendmail process as the /usr/lib/sendmail process). Regardless, my original tests were sending mail from the Mac off-network. > Also, it is always recommended when setting up a new server to start with the latest version... for 2.0.x that would be 2.0.19, but the latest is 2.1.8... When I set it up, 2.0.13 _was_ the latest. :-) I was hoping to avoid the pain of recompiling dovecot and pigeonhole. Not that big a deal, I guess. . . >> lda_original_recipient_header = X-Original-To >> lmtp_save_to_detail_mailbox = yes > > Ok, I think this is the problem... > > Dovecot's LMTP currently does NOT preserve the x-original-to header... in fact, brought this up recently (I was one of the ones interested in Timo adding support for it) on this (and the postfix, which is what I use) on this very list: > > http://www.dovecot.org/list/dovecot/2012-April/065075.html > > Apparently, after Timo discussed this on the postfix list, he determined that it would not be a very significant change for him to make to add support for this header in LMTP and that he would get to it sooner than later, but as of now, it has not been added. Actually, I'm not using lmtp. I whacked the lmtp_save_to_detail_mailbox in an effort to see if that was the issue before I realized I don't have it turned on. dovecot.conf has: protocols = imap though in 20-managesieve.conf I have: protocols = $protocols sieve I just turned it off and restarted dovecot (though lmtp was not running) and re-ran the test with the same result. So, I think what's going on is pretty straightforward. The local mailer definition in the sendmail.cf file is: Mlocal, P=/usr/local/libexec/dovecot/dovecot-lda, F=lsDFMAw5:/|@qSPhn9, S=EnvFromL/HdrFromL, R=EnvToL/HdrToL, T=DNS/RFC822/X-Unix, A=/usr/local/libexec/dovecot/dovecot-lda -d $u This is more or less right out of the wiki. Since dovecot-lda is passed the -d option, it's using that (and only that) for delivery. Since there's no X-Original-To: header, it doesn't really have any option (since the non-envelope-to address might not exist, or point to something other than the end user's mailbox, etc). It would appear that I have two options: 1) Figure out what macro(s) is(are) valid to pass to dovecot-lda with the -a option in the sendmail config file (sendmail.cf). 2) Get sendmail to put "X-Original-To: <address>" in the header. Both would appear to be a sendmail issue, not a dovecot/pigeonhole issue. Everything I find on the web seems to center around how to use plus addressing to accept mail from multiple email address and filter it into a single address for delivery, only to have the local delivery agent break it back out again. That's not my issue. :-( Sean Sean

1 1

[Dovecot] doesn't work at all
by David Drexler 19 Jul '12

19 Jul '12

Hi, I can't seem to get dovecot to work. When I connect with thunderbird, tbird complains that it can't find the settings for my email. When I connect with evolution, it seems to go through all the motions but it doesn't pick up the waiting messages. Those messages are marked Status: O s if it had read them. The log file for tbird looks like this: Jul 18 17:03:21 why dovecot: imap-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: imap-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: imap-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: pop3-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: pop3-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: pop3-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: imap-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: pop3-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: imap-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: pop3-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 Jul 18 17:03:22 why dovecot: pop3-login: Aborted login (no auth attempts): rip=68.12.110.134, lip=184.176.6.227 The log file with evolution is: Jul 17 19:36:43 why dovecot: imap-login: Login: user=<ddrex>, method=PLAIN, rip=68. 12.110.134, lip=184.176.6.227, mpid=22717, TLS Jul 17 19:36:43 why dovecot: imap(ddrex): Debug: Effective uid=500, gid=500, home=/ home/ddrex Jul 17 19:36:43 why dovecot: imap(ddrex): Debug: fs: root=/home/ddrex/mail, index=, control=, inbox=/var/mail/ddrex Jul 17 19:46:17 why dovecot: imap(ddrex): Error: Next message unexpectedly corrupte d in mbox file /var/mail/ddrex at 1504 My conf file: # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-220.23.1.el6.x86_64 x86_64 CentOS release 6.2 (Final) base_dir = /var/run/dovecot/ imap_client_workarounds = "delay-newmail " listen = * mail_debug = yes mail_location = mbox:~/mail:INBOX=/var/mail/%u mail_privileged_group = mail mbox_very_dirty_syncs = yes mbox_write_locks = fcntl passdb { driver = pam } pop3_client_workarounds = outlook-no-nuls oe-ns-eoh protocols = imap pop3 service imap-login { vsz_limit = 64 M } service pop3-login { vsz_limit = 64 M } ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { driver = passwd } -------------------------------------------------------------------- Thanks for any clues. dd

2 2

[Dovecot] SQLite dovecot query caching
by Dominic Malolepszy 19 Jul '12

19 Jul '12

Hi, I am wondering if Dovecot caches SQLite queries, and how well it works in high performance setups. I am particularly interested because in the below thread SQLite has been suggested as a means of Dovecot proxying connections to different ports. http://old.nabble.com/director%3A-non-standart-ports-at-backends-td33991991… Cheers, Dominic.

2 7

[Dovecot] MySQL dict issues
by list＠airstreamcomm.net 18 Jul '12

18 Jul '12

Testing using the mysql dict for quota storage (dovecot-2.0.12-2_127.el5), and ran into a couple issues. First is a permissions issue: dovecot: lmtp(26786, dude(a)test.tld) Error: net_connect_unix(/var/run/dovecot/dict) failed: Permission denied (euid=5000(<unknown>) egid=5000(<unknown>) missing +r perm: /var/run/dovecot/dict, euid is not dir owner) The file /var/run/dovecot/dict is listed with srw------- perms. I changes the perms to srw----rwx and it works, but I would like to figure out how to configure properly to run with the uid and gid 5000 as this is the user for virtual mail. The second issue is that two identical rows are created in the mysql database for each user quota. The next message delivered updates both rows. Here is my quota config: 90-quota.conf: plugin { quota_rule = *:storage=10G quota_rule2 = Trash:storage=+10% } plugin { quota = dict:user::proxy::userquota } dict { userquota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext } dovecot-dict-sql.conf.ext: connect = host=a.b.c.d dbname=mail user=user password=derp map { pattern = priv/quota/storage table = domain_user_quotas username_field = username value_field = bytes } map { pattern = priv/quota/messages table = domain_user_quotas username_field = username value_field = message_count } The last issue might be a documentation omission. Dovecot warned me that the mysql user did not have DELETE privileges on the quota table: dovecot: dict: Error: sql dict: commit failed: DELETE command denied to user 'user'@'a.b.c.d' for table 'domain_user_quotas' The quota dict documentation (at http://wiki2.dovecot.org/Quota/Dict) does not mention DELETE being needed: MySQL uses the following queries to update the quota. You need suitable privileges. INSERT INTO table (bytes,username) VALUES ('112497180','foo(a)spam.dom') ON DUPLICATE KEY UPDATE bytes='112497180'; INSERT INTO table (messages,username) VALUES ('1743','foo(a)spam.dom') ON DUPLICATE KEY UPDATE messages='1743'; UPDATE table SET bytes=bytes-14433,messages=messages-2 WHERE username = 'foo(a)spam.dom';

2 2

[Dovecot] Dovecot-2.1.8 process imap crashed
by Marcin Mirosław 18 Jul '12

18 Jul '12

Hello! I've just upgraded dovecot from 2.0.18 to 2.1.8 and configured impac. I notice dovecot/imap throws segfault from time to time. I'm not sure i know what steps are needed to reproduce problem. I'm using gentoo, hardened-kernel-3.4.2. Namespaces (and settings for imapc) are keept in database so i'm not sure doveconf would be useful. If would be needed please let me know. Thanks Marcin Core was generated by `dovecot/imap'. Program terminated with signal 11, Segmentation fault. #0 0x000002d0fbf908a2 in mail_storage_set_internal_error (storage=0x0) at mail-storage.c:466 466 mail-storage.c: No such file or directory. in mail-storage.c (gdb) bt #0 0x000002d0fbf908a2 in mail_storage_set_internal_error (storage=0x0) at mail-storage.c:466 #1 0x000002d0fbf5f025 in imapc_noop_callback (reply=<optimized out>, context=<optimized out>) at imapc-storage.c:691 #2 0x000002d0fbf5f07a in imapc_idle_noop_callback (reply=<optimized out>, context=0x2b466158c0) at imapc-storage.c:713 #3 0x000002d0fbf6208a in imapc_connection_abort_commands (conn=0x2b46579c10, disconnected=<optimized out>, keep_retriable=<optimized out>) at imapc-connection.c:271 #4 0x000002d0fbf624be in imapc_connection_disconnect (conn=0x2b46579c10) at imapc-connection.c:371 #5 0x000002d0fbf636b9 in imapc_connection_deinit (_conn=0x2b46579b20) at imapc-connection.c:178 #6 0x000002d0fbf60113 in imapc_client_deinit (_client=0x2b4655b6e8) at imapc-client.c:111 #7 0x000002d0fbf5ea77 in imapc_storage_destroy (_storage=<optimized out>) at imapc-storage.c:275 #8 0x000002d0fbf90600 in mail_storage_unref (_storage=0x2b46558910) at mail-storage.c:417 #9 0x000002d0fbf8a259 in mail_namespace_free (ns=0x2b465588c0) at mail-namespace.c:37 #10 0x000002d0fbf8a784 in mail_namespaces_deinit (_namespaces=0x2b4654c9e8) at mail-namespace.c:437 #11 0x000002d0fbf95311 in mail_user_deinit_base (user=0x2b4654c970) at mail-user.c:29 #12 0x000002d0f940f658 in stats_user_deinit (user=0x2b4654c970) at stats-plugin.c:506 #13 0x000002d0fa86b619 in quota_user_deinit (user=0x2b4654c970) at quota-storage.c:412 #14 0x000002d0fbf95597 in mail_user_unref (_user=<optimized out>) at mail-user.c:153 #15 0x0000002b4461b58e in client_destroy (client=0x2b465891d0, reason=0x0) at imap-client.c:219 #16 0x0000002b44615552 in idle_client_input (ctx=<optimized out>) at cmd-idle.c:113 #17 0x000002d0fbce3767 in io_loop_call_io (io=0x2b46622ff0) at ioloop.c:379 #18 0x000002d0fbce469a in io_loop_handler_run (ioloop=<optimized out>) at ioloop-epoll.c:213 #19 0x000002d0fbce3054 in io_loop_run (ioloop=0x2b46525aa0) at ioloop.c:398 #20 0x000002d0fbccc446 in master_service_run (service=0x2b46525950, callback=<optimized out>) at master-service.c:543 #21 0x0000002b44624e76 in main (argc=1, argv=0x2b46525790) at main.c:389 (gdb) bt full #0 0x000002d0fbf908a2 in mail_storage_set_internal_error (storage=0x0) at mail-storage.c:466 str = 0x2b4651e840 "Internal error occurred. Refer to server log for more information. [2012-07-17 16:06:09]" #1 0x000002d0fbf5f025 in imapc_noop_callback (reply=<optimized out>, context=<optimized out>) at imapc-storage.c:691 storage = <optimized out> #2 0x000002d0fbf5f07a in imapc_idle_noop_callback (reply=<optimized out>, context=0x2b466158c0) at imapc-storage.c:713 mbox = 0x2b466158c0 #3 0x000002d0fbf6208a in imapc_connection_abort_commands (conn=0x2b46579c10, disconnected=<optimized out>, keep_retriable=<optimized out>) at imapc-connection.c:271 cmdp = 0x2b4651e808 cmd = 0x2b466116a0 tmp_array = {arr = {buffer = 0x2b4651e7c8, element_size = 8}, v = 0x2b4651e7c8, v_modifiable = 0x2b4651e7c8} reply = {state = IMAPC_COMMAND_STATE_DISCONNECTED, resp_text_key = 0x0, resp_text_value = 0x0, text_full = 0x2d0fbfe768e "Disconnected from server", text_without_resp = 0x2d0fbfe768e "Disconnected from server"} #4 0x000002d0fbf624be in imapc_connection_disconnect (conn=0x2b46579c10) at imapc-connection.c:371 reconnecting = false #5 0x000002d0fbf636b9 in imapc_connection_deinit (_conn=0x2b46579b20) at imapc-connection.c:178 No locals. #6 0x000002d0fbf60113 in imapc_client_deinit (_client=0x2b4655b6e8) at imapc-client.c:111 client = 0x2b4655c6e0 connp = 0x2b4655c840 __FUNCTION__ = "imapc_client_deinit" #7 0x000002d0fbf5ea77 in imapc_storage_destroy (_storage=<optimized out>) at imapc-storage.c:275 storage = <optimized out> #8 0x000002d0fbf90600 in mail_storage_unref (_storage=0x2b46558910) at mail-storage.c:417 storage = 0x2b4655b5e0 __FUNCTION__ = "mail_storage_unref" #9 0x000002d0fbf8a259 in mail_namespace_free (ns=0x2b465588c0) at mail-namespace.c:37 No locals. #10 0x000002d0fbf8a784 in mail_namespaces_deinit (_namespaces=0x2b4654c9e8) at mail-namespace.c:437 ns = <optimized out> next = 0x2b46550dd0 #11 0x000002d0fbf95311 in mail_user_deinit_base (user=0x2b4654c970) at mail-user.c:29 No locals. #12 0x000002d0f940f658 in stats_user_deinit (user=0x2b4654c970) at stats-plugin.c:506 suser = 0x2b4654e8c8 stats_conn = 0x2b46552170 __FUNCTION__ = "stats_user_deinit" #13 0x000002d0fa86b619 in quota_user_deinit (user=0x2b4654c970) at quota-storage.c:412 quser = 0x2b4654e890 quota_set = 0x2b46551190 #14 0x000002d0fbf95597 in mail_user_unref (_user=<optimized out>) at mail-user.c:153 user = 0x2b4654c970 __FUNCTION__ = "mail_user_unref" #15 0x0000002b4461b58e in client_destroy (client=0x2b465891d0, reason=0x0) at imap-client.c:219 cmd = <optimized out> __FUNCTION__ = "client_destroy" #16 0x0000002b44615552 in idle_client_input (ctx=<optimized out>) at cmd-idle.c:113 ---Type <return> to continue, or q <return> to quit--- client = 0x2b465891d0 #17 0x000002d0fbce3767 in io_loop_call_io (io=0x2b46622ff0) at ioloop.c:379 ioloop = 0x2b46525aa0 t_id = 2 #18 0x000002d0fbce469a in io_loop_handler_run (ioloop=<optimized out>) at ioloop-epoll.c:213 ctx = 0x2b46525e10 events = <optimized out> event = 0x2b46525e80 list = 0x2b465a80a0 io = <optimized out> tv = {tv_sec = 5, tv_usec = 999824} msecs = <optimized out> ret = 1 i = <optimized out> j = <optimized out> call = <optimized out> #19 0x000002d0fbce3054 in io_loop_run (ioloop=0x2b46525aa0) at ioloop.c:398 No locals. #20 0x000002d0fbccc446 in master_service_run (service=0x2b46525950, callback=<optimized out>) at master-service.c:543 No locals. #21 0x0000002b44624e76 in main (argc=1, argv=0x2b46525790) at main.c:389 set_roots = {0x2b4482ad60, 0x0} login_set = {auth_socket_path = 0x2b4651d498 "/var/run/dovecot/auth-master", postlogin_socket_path = 0x0, postlogin_timeout_secs = 60, callback = 0x2b44624804 <login_client_connected>, failure_callback = 0x2b446244fd <login_client_failed>} service_flags = <optimized out> storage_service_flags = MAIL_STORAGE_SERVICE_FLAG_DISALLOW_ROOT username = 0x0 c = <optimized out>

2 2

[Dovecot] expire-tool stops on first box with nothing to expire in it
by Michael Wessel 18 Jul '12

18 Jul '12

Hi, I'm running dovecot 1.2.11 on Centos and have the expire plugin enabled. I've had this in place for some time but until now never actually ran the expire-tool. I'm now trying to put this to use. The expire plugin as such is working fine and also the tool is working fine - up to a point. When I run it with --test it goes through a bunch of boxes and lists the messages it would expunge and the new date being logged at the end. As soon as it hits the first box that has nothing in it that's expired however, it stops and goes no further. As an example here are the last two lines of the output when I just ran it: Info: user(a)domain.com/Trash: timestamp 1342320464 (Sat Jul 14 19:47:44 2012) -> 1342937319 (Sat Jul 21 23:08:39 2012) Info: nextuser(a)domain.com/Trash: stop, expire time in future: Sat Jul 14 20:41:49 2012 If I run it again after the indicated expire time it will now also go through the nextuser(a)domain.com but then again stop as soon as it encounters another user with nothing to expire. As far as I can tell the same happens when I actually run the tool. Harder to tell of course as there is no output, but I can tell that not all boxes are expunged as they should be. Any ideas why this would be? Any way to get debug logging on this? Michael

2 2

[Dovecot] Compile issue Dovecot 2.1.8, OS X 10.6.x
by Jim 18 Jul '12

18 Jul '12

Hey all. I'm running Mac OS X 10.6.4, and had Dovecot 2.0.7 installed built from source. I'm now wanting to upgrade to Dovecot 2.1.8, but I can't get MAKE to finish without errors: ./configure --with-mysql (snip) Install prefix . : /usr/local File offsets ... : 64bit I/O polling .... : kqueue I/O notifys .... : kqueue SSL ............ : yes (OpenSSL) GSSAPI ......... : no passdbs ........ : static passwd passwd-file pam checkpassword sql : -shadow -bsdauth -sia -ldap -vpopmail userdbs ........ : static prefetch passwd passwd-file checkpassword sql : -ldap -vpopmail -nss SQL drivers .... : mysql : -pgsql -sqlite Full text search : squat : -lucene -solr sudo make (snip) Undefined symbols: "_libiconv_open", referenced from: _charset_to_utf8_begin in libcharset.a(charset-iconv.o) "_libiconv", referenced from: _charset_to_utf8_reset in libcharset.a(charset-iconv.o) _charset_to_utf8 in libcharset.a(charset-iconv.o) "_libiconv_close", referenced from: _charset_to_utf8_end in libcharset.a(charset-iconv.o) ld: symbol(s) not found collect2: ld returned 1 exit status make[3]: *** [libdovecot.la] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 The reason for the 'sudo make' was to get around a permissions issue, but I don't think that's related to my issue here. I had build Dovecot 2.0.7 and earlier without issue on this system, but I'm a bit stumped on this particular problem. I also found that the configure parameter --with-sql-drivers no longer seems to work, even though it's still shown in the wiki for 2.x. As far as I can tell, I had used this parameter when compiling 2.0.7.

2 4

[Dovecot] Different LDAP filters for different protocols
by James Devine 18 Jul '12

18 Jul '12

Is it possible to query LDAP differently for different protocols? I am using dovecot for both pop3/imap and lmtp deliveries and there are different enable flags in ldap for them. I tried wrapping user_filter inside the protocols in the file dovecot-ldap.conf.ext as shown below but this didn't seem to work. protocol lmtp { user_filter = (&(objectClass=posixAccount)(cn=%u)(active=1)(msmtp=1)) } protocol imap { user_filter = (&(objectClass=posixAccount)(cn=%u)(active=1)(mpop=1)) } protocol pop3 { user_filter = (&(objectClass=posixAccount)(cn=%u)(active=1)(mpop=1)) }

1 1

[Dovecot] outlook and redirect sieve
by Lazy 18 Jul '12

18 Jul '12

Hi Aall, we are having issues with outlook clients, running exchange or lotus being unable to parse the email messages redirected by dovecot's sieve 0.3.1, the command is plain redirect "email(a)lotusmail.xxx"; redirects from mta also work correctly exchange was fixed by removing this commit http://hg.rename-it.nl/dovecot-2.1-pigeonhole/raw-diff/082216ad12d6/src/lib… are there any other modifications to the email body or headers that can make those mesages not parsable for outlook ? looking at http://hg.rename-it.nl/dovecot-2.1-pigeonhole/raw-diff/082216ad12d6/src/lib… maybe removing HEADER_FILTER_NO_CR fromi_stream_create_header_filter() will make redirected messages more in tact ? what can I do to make redirect more verbatim ? Thanks in advance for any information. Regards, Michal Grzedzicki

2 3

[Dovecot] Selective TLS per local IP
by Robert Blayzor 17 Jul '12

17 Jul '12

We have the requirement to provide SSL on some IP addresses, but not others on our servers. Providing SSL is the easy part and we're able to use multiple SSL certificates now. (thanks Timo!) All is working ok, but we several IP hosts that do not require SSL and do not have valid certificates. While we can limit access via a firewall ACL to TLS connect ports (993/995) we can't do so on port 110/143. The problem is that some clients now are smart enough to look for an offered STARTTLS or STLS, and if it's offered, they try to use it. While not normally a problem if your setup for SSL with valid key/certs, if you have a self signed or no CERT at all, it starts connection warnings and errors on the client side. So is there any way possible to turn off advertising of TLS on port or turn it off/on per IP? Something like: ssl = yes ssl_cert = </etc/ssl/cert/default.pem ssl_key = </etc/ssl/cert/default.pem local 10.1.1.1 { protocol imap { ssl_cert = </etc/ssl/cert/site1.pem ssl_key = </etc/ssl/cert/site1.pem } protocol pop3 { ssl_cert = </etc/ssl/cert/site1.pem ssl_key = </etc/ssl/cert/site1.pem } } local 10.1.1.2 { ssl = no } *or* ssl = no local 10.1.1.1 { ssl = yes protocol imap { ssl_cert = </etc/ssl/cert/site1.pem ssl_key = </etc/ssl/cert/site1.pem } protocol pop3 { ssl_cert = </etc/ssl/cert/site1.pem ssl_key = </etc/ssl/cert/site1.pem } } -- Robert Blayzor INOC, LLC rblayzor(a)inoc.net http://www.inoc.net/~rblayzor/

2 4

[Dovecot] files missed from install
by Tim Dickson 17 Jul '12

17 Jul '12

version: using dovecot 2.1.8 or 2.0.12 bug: installation - some files missed details: dovecot-openssl.cnf and mkcert.sh are not copied from the src/doc folder to the installation doc folder on installation (make install) both are referred to in the documentation and are useful. is there any chance of updating the build scripts to include these files? thanks, Tim

3 3

[Dovecot] [PATCH] Interop problem with Cyrus SASL and GSSAPI
by Ben Morrow 17 Jul '12

17 Jul '12

[I sent this a while ago, but it seems not to have made it to the list. I'm resending it having subscribed first; I apologise if anyone get it twice.] I have been trying to get a Postfix mail server using Dovecot SASL to accept GSSAPI AUTH from another Postfix server using Cyrus SASL, and I believe I have found a couple of bugs in Dovecot's GSSAPI implementation. The first problem is that, because of the way the client invokes libsasl, it sends a GSSAPI request which does not ask for mutual authentication. This means that on the server gss_accept_sec_context returns GSS_S_COMPLETE with a zero-length output token. Dovecot currently sends this to the client as a zero-length continuation response, but this is incorrect according to RFC 4752: what it ought to do instead is proceed straight to the security layer negotiations, and send a gss_wrap packet. The second is that Cyrus sends an empty authz identity; that is, the security layer negotiation packet, when gss_unwrapped, is exactly 4 bytes long. Dovecot objects to this, but in RFC 4422 this is explicitly allowed, and means the authz identity is identical to the authn identity. I believe the attached patches (for the 1.2 and 2.1 branches) fix the problem, though I'm not entirely sure if the difference between the p_strndup in mech_gssapi_unwrap and the t_strndup in get_display_name is important. Ben

2 1

[Dovecot] Timeout (180s) while waiting for lock for transaction log file
by Angel L. Mateo 17 Jul '12

17 Jul '12

Hello, We still have problems with our updated dovecot servers... The problem now is that we are having errors like: Jul 9 10:22:02 myotis31 dovecot: lmtp(15431, <user>): Error: Timeout (180s) while waiting for lock for transaction log file /var/indexes/<user>/.INBOX/dovecot.index.log Jul 9 10:22:02 myotis31 dovecot: lmtp(15431, <user>): Error: +4YfCwKS+k9HPAAAmo+UlA: sieve: msgid=<4FFA8700.2080003(a)um.es>: failed to store into mailbox 'INBOX': Internal error occurred. Refer to server log for more information. [2012-07-09 10:19:02] Jul 9 10:22:02 myotis31 dovecot: lmtp(15431, <user>): Error: +4YfCwKS+k9HPAAAmo+UlA: sieve: script /home/pdi/88/185188/.dovecot.sieve failed with unsuccessful implicit keep (user logfile /home/pdi/88/185188/.dovecot.sieve.log may reveal additional details) in the .dovecot.sieve.log all we have is just: sieve: info: started log at Jul 09 10:22:02. error: msgid=<4FFA8700.2080003(a)um.es>: failed to store into mailbox 'INBOX': Internal error occurred. Refer to server log for more information. [2012-07-09 10:19:02]. maildir are in a nfs storage, but indexes are in local disk. I don't know if the problem could be related with a some "specific" messages or something specific to the user, because we are having this problem only with a few users and the problem repeatedly happens when our mta tries to deliver the queued message. Any idea? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868887590 Fax: 868888337

2 1

[Dovecot] quota fs: Support for hardlimit quotas (where softquota is unset)
by Jan Friesse 17 Jul '12

17 Jul '12

Hi, included is patch which adds support for calculating fs quota from hardlimit where softlimit is unset. I'm usually not setting softlimit on my server causing dovecot work incorrectly (not reporting quota at all). Regards, Jan Friesse

2 1

[Dovecot] Feature request
by Malloc Kilobyte 17 Jul '12

17 Jul '12

Hi, I am implementig Dovecot as a part of my new e-mail server, which is aimed to be replacement for proprietary software I've been using sofar. Appreciating all Dovecot rich features, I lack just one. And this is the ability to customize the "quota exceeded, message rejected" message. I know I can set it's default content using quota_exceeded_message parameter, but i would also like to have ability to set: - to whom the message is sent. Some mail systems send copy not only to the sender, but also to the recipient. It makes sense in case rejected message has big size. - it's subject - if the rejected message is being attached ( with or without it's own attachments ) or not Moreover, I think it would make sense if the "rejected messege" contained information about size of rejected message and current mailbox space usage. Please, consider this in future development. with regards and respect to the tremendousness of Dovecot, -- malloc4k

5 5

[Dovecot] LDAP.conf filter issue
by Tony Hlabse 17 Jul '12

17 Jul '12

All, We are trying to use the user_filter options to limit authentication to a single user group. The cusotmer has security rules that they want to only have users belonging to a group to have access. Sample we have tried. auth_bind = yes auth_bind_userdn = EXAMPLE\%n base = / hosts = example.test.com ldap_version = 3 user_filter = (&(sAMAccountName=)(memberOf=CN=LR3BCC-DL,OU=Autonomy,OU=Exchange,OU=Enterprise Administration,DC=example,DC=test,DC=com)) Thanks Tony

2 1

[Dovecot] dovecot 2.1.8 still tries to touch any mountpoint
by Reindl Harald 17 Jul '12

17 Jul '12

why does dovecot touch any ever used fuse-mountpoint and scream at the next start that is no longer mounted? "If this is intentional, remove it with doveadm mount" why if i never called "doveadm" on any setup at all? Jul 10 09:10:56 rh dovecot: master: Dovecot v2.1.8 starting up (core dumps disabled) Jul 10 09:10:56 rh dovecot: master: Warning: /sys/fs/cgroup/cpu is no longer mounted. If this is intentional, remove it with doveadm mount Jul 10 09:10:56 rh dovecot: master: Warning: /sys/fs/cgroup/cpuacct is no longer mounted. If this is intentional, remove it with doveadm mount Jul 10 09:10:56 rh dovecot: master: Warning: /var/run/vmblock-fuse is no longer mounted. If this is intentional, remove it with doveadm mount Jul 10 09:10:56 rh dovecot: master: Warning: /mnt/arrakis is no longer mounted. If this is intentional, remove it with doveadm mount Jul 10 09:10:56 rh dovecot: master: Warning: /mnt/loungebackup is no longer mounted. If this is intentional, remove it with doveadm mount Jul 10 09:10:56 rh dovecot: master: Warning: /mnt/panel is no longer mounted. If this is intentional, remove it with doveadm mount Jul 10 09:10:56 rh dovecot: master: Warning: /mnt/proxy is no longer mounted. If this is intentional, remove it with doveadm mount

3 4

[Dovecot] doveadm director status username != doveadm director status username@mailserver
by Joseba Torre 17 Jul '12

17 Jul '12

Hi, I've almost finished my new director based setup, but in the first test I discovered that imap and lmtp connections were not always being proxied to the same server. After some research now I think that the main problem is that in imap connections users connect as 'username' while lmtp connections are as 'username@mailserver'. In my current setup I receive mail via SMTP in my director servers (which are loadbalanced by a CISCO machine), and then they send them to dovecot running on localhost. I've tried to get rid of the @mailserver in postfix in a generic way with no success. Is there any way to redirect connections based only in the local part of the address? Or there is a way to get rid of the @mailserver in the postfix -> lmtp connection? Both doveadm config -n and postconf -n are attached. Thanks. $ doveadm config -n # 2.1.8: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-220.17.1.el6.x86_64 x86_64 Red Hat Enterprise Linux Server release 6.2 (Santiago) auth_debug = yes auth_master_user_separator = * auth_verbose = yes director_mail_servers = buzones2.ehu.es buzones3.ehu.es director_servers = director1.ehu.es director2.ehu.es doveadm_proxy_port = 4444 lmtp_proxy = yes mail_debug = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave passdb { args = proxy=y nopassword=y starttls=any-cert driver = static } protocols = imap pop3 lmtp sieve service auth { unix_listener auth-userdb { user = dovecot } } service director { fifo_listener login/proxy-notify { mode = 0666 } inet_listener { port = 3333 } unix_listener director-userdb { mode = 0600 } unix_listener login/director { mode = 0666 } } service doveadm { inet_listener { port = 4444 } } service imap-login { executable = imap-login director } service lmtp { inet_listener ltmp { address = director2.ehu.es 127.0.0.1 port = 24 } unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service managesieve-login { executable = managesieve-login director vsz_limit = 128 M } service pop3-login { executable = pop3-login director } ssl_cert = </etc/ssl/private/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem syslog_facility = local1 userdb { args = allow_allusers=yes driver = static } protocol lmtp { auth_socket_path = director-userdb mail_plugins = " sieve" syslog_facility = local2 } protocol doveadm { auth_socket_path = director-userdb } $ postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases canonical_maps = hash:/etc/postfix/canonical command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix data_directory = /var/lib/postfix debug_peer_level = 2 html_directory = no inet_interfaces = all inet_protocols = all local_destination_concurrency_limit = 10 local_recipient_maps = ldap:/etc/postfix/ldap-local-recipients.cf proxy:unix:passwd.byname $alias_maps mail_owner = postfix mailbox_transport = lmtp:inet:localhost:24 mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man message_size_limit = 15000000 mydestination = ehu.es, mailsever.ehu.es, othermailserver.ehu.es mydomain = ehu.es myhostname = director1.ehu.es mynetworks_style = host myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.6.6/README_FILES relayhost = [smtp.ehu.es] sample_directory = /usr/share/doc/postfix-2.6.6/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop unknown_local_recipient_reject_code = 550

3 4

Re: [Dovecot] doveadm director status username != doveadm director status username@mailserver
by Joseba Torre 17 Jul '12

17 Jul '12

El 17/07/12 13:34, Lee Standen escribió: > One thing that stands out to me is the lack of passdb. One of the > recommendations I got from the passdb documentation was to override the > user field, so the user is always logged in consistently. Without this, > "BOB", "bob" and "bob(a)mydomain.com <mailto:bob@mydomain.com>" might all > accept auth, but be handled differently! If you configure your passdb, > then you'll get some consistency, which will probably fix your director > problem. We don't use passdb in the directors because incoming mails have already been checked by postfix, and the final mail server need to check our ldap server for other values, so we check there. Actually, I still feel that I can override some ldap connections if I think about it carefully. Thank you. > > At the very least, you probably want to lowercase all your usernames. >

1 0

[Dovecot] different mail_max_userip settings
by Federico Bianchi 17 Jul '12

17 Jul '12

Is it possible to have mail_max_userip set to a value for localhost (webmail) and to another value for everything else? Best regards Federico Bianchi Dipartimento di Storia delle Arti Universita` di Pisa via Trieste, 38 - I-56126 Pisa (Italy) tel.(+39) 050 221 6 024; fax (+39) 050 221 6 001 e-mail: <f.bianchi(a)arte.unipi.it> =================================================== !DISCLAIMER!: my e-mail reflects _my_own_ opinions! ===================================================

3 3

[Dovecot] Seq-range order in sequence-set are matter?
by Lay András 17 Jul '12

17 Jul '12

Hi! I have a mailbox with 12 messages. Theese two commands: x fetch 5,8:12 (UID) * 5 FETCH (UID 10) * 8 FETCH (UID 13) * 9 FETCH (UID 14) * 10 FETCH (UID 15) * 11 FETCH (UID 16) * 12 FETCH (UID 17) x OK Fetch completed. and x fetch 8:12,5 (UID) * 5 FETCH (UID 10) * 8 FETCH (UID 13) * 9 FETCH (UID 14) * 10 FETCH (UID 15) * 11 FETCH (UID 16) * 12 FETCH (UID 17) x OK Fetch completed. outputs are equeal, this clean. But: x fetch 1:*,5 (UID) * 1 FETCH (UID 4) * 2 FETCH (UID 5) * 3 FETCH (UID 6) * 4 FETCH (UID 7) * 5 FETCH (UID 10) * 6 FETCH (UID 11) * 7 FETCH (UID 12) * 8 FETCH (UID 13) * 9 FETCH (UID 14) * 10 FETCH (UID 15) * 11 FETCH (UID 16) * 12 FETCH (UID 17) x OK Fetch completed. and x fetch 5,1:* (UID) * 5 FETCH (UID 10) * 6 FETCH (UID 11) * 7 FETCH (UID 12) * 8 FETCH (UID 13) * 9 FETCH (UID 14) * 10 FETCH (UID 15) * 11 FETCH (UID 16) * 12 FETCH (UID 17) x OK Fetch completed. command outputs are NOT equal? Why? Thank you! Lay

2 1

[Dovecot] Override userdb=passwd gid
by Veiko Kukk 17 Jul '12

17 Jul '12

Hi! I have problem with Dovecot 2.1.1 writing maildir files as users primary group. Tried to override gid value, but probably i'm missing something... doveconf -n # 2.1.1: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-308.11.1.el5 x86_64 CentOS release 5.8 (Final) auth_verbose = yes info_log_path = /var/log/dovecot/info.log listen = * log_path = /var/log/dovecot/error.log mail_location = maildir:%h/Maildir passdb { args = cache_key=%u dovecot driver = pam } protocols = imap service imap-login { process_min_avail = 40 service_count = 1 } service imap { process_limit = 2048 vsz_limit = 2 G } ssl = required ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { args = blocking=no gid=mail driver = passwd } Also tried using 'override_fields = gid=mail'. Users are from nss and winbind. Any ideas what i might do wrong? -- Veiko

2 1

[Dovecot] Difference between proxy_refresh and proxy_timeout in director
by Angel L. Mateo 17 Jul '12

17 Jul '12

Hello, I know proxy_timeout is the timeout for the director operation. But what is the purpose for proxy_refresh? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(___V Tfo: 868887590 Fax: 868888337

2 1

[Dovecot] imapc: Restrict the number of connections
by René Neumann 17 Jul '12

17 Jul '12

Hi, I have managed to get an imapc connection to another server and bind its contents to only one account (via global ACL). The namespace itself is created as public, though it does not seem to make a difference for this use case (i.e., it does not matter, whether its type is 'public', 'shared', or 'private'). namespace { hidden = no list = children location = imapc: prefix = Gemeinsam. separator = . subscriptions = no type = public } One problem remains: Though there is only one account that is allowed to use this imapc-connection, each imap-process opens a connection to the imapc'd server. Is this caused directly by the imapc_*-definitions in the config? Or is there a way of restricting this to only the account which actually uses it. Used dovecot version: 2.1.8 Thanks, René

2 1

[Dovecot] bcypt availability
by Nick Edwards 17 Jul '12

17 Jul '12

Dear Timo, Do you intend to introduce bcrypt into the built in password schemes? In lew of all these hacks lately many larger companies appear moving this way, we are looking at it too, but dovecot will then be the weakest link in the database security. So, are you planning on this and if so what sort of timeframe / version would you expect it to be in beta ? Nik

5 6

Re: [Dovecot] Issues with Plus addressing and detail part of subaddress.
by Sean Kamath 17 Jul '12

17 Jul '12

On Jul 15, 2012, at 4:34 AM, Charles Marcus wrote: > On 2012-07-15 4:50 AM, Sean Kamath <kamath(a)moltingpenguin.com> wrote: >> Before I dive in and upgrade everything, am I missing something simple? > > dovecot -n output maybe? Certainly (wasn't on the list of "things to put in a post" on the web site, so I missed it): # 2.0.13: /etc/dovecot/dovecot.conf # OS: SunOS 5.10 sun4u base_dir = /var/run/dovecot/ hostname = mail.enoent.net lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes lda_original_recipient_header = X-Original-To lmtp_save_to_detail_mailbox = yes mail_location = sdbox:~/Mail:INDEX=/var/dovecot/indices/%u managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date passdb { driver = pam } plugin { recipient_delimiter = + sieve = ~/.dovecot.sieve sieve_dir = ~/.sieve } protocols = imap sieve ssl_cert = </etc/mail/certs/server.crt ssl_key = </etc/mail/certs/server.key userdb { driver = passwd } protocol lda { mail_plugins = " sieve" } Sean

2 4

[Dovecot] incremental backups of maildir via rsync
by Harald Dunkel 17 Jul '12

17 Jul '12

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi folks, I would like to do incremental backups of the users' maildir directories to a dedicated backup host (using "rsync -SHa" and rsnapshot). Problem is: Dovecot bloats the incremental backup by changing the file names again and again. Is there some way to tell Dovecot to keep meta information separate from the file names? Any helpful comment would be highly appreciated. Harri -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.12 (GNU/Linux) iEYEARECAAYFAlADpIsACgkQUTlbRTxpHjdS+ACgkPRnzRD2jrcz09kQx9jj9j5v Y1UAniJdRa14hc53gLbxkuBPbx5V5BCh =6nvA -----END PGP SIGNATURE-----

4 6

[Dovecot] Last login datetime on accounts
by Robert Blayzor 16 Jul '12

16 Jul '12

I have searching for the best way to tell if a Dovecot user is idle by finding the last time they have logged in. Right now the best way I can tell is to do something like "touch" a file in the users homedir via a post login exec. This seems like a LOT of overhead, to accomplish such a simple task, especially if your doing a lot of dozens of logins per second. Is there an easier/better way? Is there a way to possibly tell Dovecot to refresh the mod time on an index file whenever the user successfully auths or to refresh a separate file in the homedir, ie: ~/.lastlogin (not ~/Maildir/.lastlogin as that would obviously cause some issues) Seems like something that would be far less overhead than calling a shell, execing another command, etc. I'm open to other ideas/alternatives if they are out there! TIA -- Robert Blayzor INOC, LLC rblayzor(a)inoc.net http://www.inoc.net/~rblayzor/

4 4

[Dovecot] Multi Server Exim/Dovecot and NFS
by Robert Blayzor 16 Jul '12

16 Jul '12

In reading the Dovecot NFS WIKI entry: http://wiki2.dovecot.org/NFS It mentions a FreeBSD NFS client caching bug. I believe that bug only exists pre-8.x ? It seems that a patch in the PR notes was MFC'd and made it into 8.x at some point. (at least I checked the source in 8.3 and it was there). So I assume that FreeBSD 8.x mitigates the issue? Maybe not? So our deployment is multi server Dovecot/Exim running on FreeBSD servers, frontended by a layer3 load balancing switch and a NetApp NFSv3 datastore. The only real concern we have right now is race conditions and file write contention on the Dovecot index files. Our original plan was to use Dovecot LMTP on the servers to deliver to the inbox, but that doesn't seem to be recommended as we'll have a number of servers all acting as primary MX for domains and delivering to the same set of mailboxes. So are the Dovecot dotlock file locking mechanisms not enough for multiple servers trying to write/access index files in Maildirs? If we have to deliver straight to the ~/Maildir/new out of Exim, that's fine, also. We're just wondering if there is a added benefit of actually using LMTP. (other than making sure the index are kept the most recent). The other concern we have is client mailbox access. While we can make sessions "sticky" from one IP so they hit the same server, it doesn't help with the person that checks their email via POP from their PC while having their mobile phone access it via IMAP. (obviously from different IP addresses). So I guess there is some possibly index file write contention there as well. (though hopefully this should be rare). I'm curious as to know others experiences with a similar deployment. TIA -- Robert Blayzor INOC, LLC rblayzor(a)inoc.net http://www.inoc.net/~rblayzor/

5 7

[Dovecot] ACL with MySQL dict => full table scans
by Roland Rosenfeld 16 Jul '12

16 Jul '12

Hi! I'm just installing ACL support on 2.1.6. When a user changes these ACLs, this results in a full table scan on the dictionary, that tells dovecot who shares with whom. Here's what queries I see when I run $ doveadm acl delete -u user1 shared/user2/folder user=user1 1: SELECT dummy,to_user,from_user FROM imap_acl_shares 2: SELECT dummy,from_user FROM imap_acl_anyone 3: BEGIN 4: DELETE FROM imap_acl_shares WHERE to_user = 'user1' AND from_user = 'user1' 5: INSERT INTO imap_acl_shares (dummy,to_user,from_user) VALUES ('1','user1','user1') ON DUPLICATE KEY UPDATE dummy='1' 6: DELETE FROM imap_acl_shares WHERE to_user = 'user2' AND from_user = 'user1' 7: INSERT INTO imap_acl_shares (dummy,to_user,from_user) VALUES ('1','user2','user1') ON DUPLICATE KEY UPDATE dummy='1' 8: COMMIT Line 2 is okay, since imap_acl_anyone is always empty (I'm not able to disable this query, otherwise dovecot spawns errors about a missing map, but I can live with this). Don't ask me what lines 4/5 are repeated in 6/7, but these use indexes and I can live with this. But what the hell is line 1? Why doesn't dovecot use a WHERE clause here with either to_user='user1', to_user='user2', from_user='user1', or from_user='user2'? All these WHERE clauses would use an index and speedup the query. Without the WHERE clause I expect 100000 or more results on our production system, which could slow down it massively. Here's my setup: /etc/dovecot/dovecot-dict-sql.conf: connect = host=foo dbname=mail user=imap password=hidden map { pattern = shared/shared-boxes/user/$to/$from table = imap_acl_shares value_field = dummy fields { from_user = $from to_user = $to } } map { pattern = shared/shared-boxes/anyone/$from table = imap_acl_anyone value_field = dummy fields { from_user = $from } } And dovecot -n: # 2.1.6: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.5 auth_cache_negative_ttl = 5 mins auth_cache_size = 100 M auth_cache_ttl = 5 mins auth_default_realm = example.com auth_master_user_separator = * auth_mechanisms = plain login auth_verbose = yes dict { acl = mysql:/etc/dovecot/dovecot-dict-sql.conf } disable_plaintext_auth = no listen = * log_timestamp = "%Y-%m-%d %H:%M:%S " mail_fsync = always mail_gid = 999 mail_location = maildir:~/mail mail_plugins = acl quota mail_uid = 999 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave imapflags mmap_disable = yes namespace { list = children location = maildir:%%h/mail:INDEX=~/mail/shared/%%u prefix = shared/%%u/ separator = / subscriptions = no type = shared } namespace inbox { inbox = yes location = prefix = separator = / type = private } passdb { args = /etc/dovecot/passwd.master driver = passwd-file master = yes pass = yes } passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } plugin { acl = vfile acl_shared_dict = proxy::acl quota = maildir sieve = ~/.dovecot.sieve sieve_dir = ~/mail/sieve sieve_extensions = +imapflags } protocols = imap pop3 sieve service auth { unix_listener auth-master { group = vmail mode = 0600 user = vmail } } service dict { unix_listener dict { group = vmail mode = 0600 user = vmail } } service imap { process_limit = 4000 } service managesieve-login { inet_listener sieve { port = 4190 } } service managesieve { process_limit = 100 } service pop3 { process_limit = 1000 } shutdown_clients = no ssl = no syslog_facility = local2 userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } verbose_proctitle = yes protocol imap { mail_max_userip_connections = 10 mail_plugins = quota imap_quota acl imap_acl } protocol pop3 { mail_plugins = quota pop3_no_flag_updates = yes pop3_uidl_format = %v.%u } Tschoeeee Roland

1 0

Re: [Dovecot] Maildir messages
by Nick＠5sg.eu 16 Jul '12

16 Jul '12

Hi Wojciech Thanks for your comeback.. > maybe - just as in article below > http://www.bishnet.net/tim/blog/tag/maildir-to-mbox/ > you like archive in such format I'm trying to switch dovecot to MBox, not just make archives. BTW: I use http://yergler.net/projects/one-off/maildir-to-mbox as it's much smaller and very simple to use to make archives. Does anyone else know the correct way to either switch the existing Maildir multiple file format to the single MBox file format. Failing that, though it will mean a LOT of work, how do I get dovecot to work in future in MBox single file format. I've entered 'mail_location = mbox:~/mail:INBOX=/%h/%u' in the 'dovecot.conf', but it still saves each message in a file of its own in the /new /cur /tmp directories ?? -------Original question -------- > Can someone guide me on changing the Maildir messages files > back to the single file format I used to have instead of the > dovecot.index /cur /tmp /new format my newer server currently > has. I'm running dovecot v1.2.9 postfix v2.7 on Ubuntu v10.4 Thanks, Nick. . . . . -- _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ . . . . . . . . ...---... (Stamp Out Spam and Save Our Servers) http://sosNow.ws -=[ do you know morse code ? ]=- . . . . . . . . _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/

2 1

[Dovecot] director: non standart ports at backends
by Костырев Александр Алексеевич 16 Jul '12

16 Jul '12

hello, I'm trying to figure out how to proxy pop3 and pop3s that listens on non-standart ports at backends. For example, pop3 is at 1110 and pop3s at 1995 (on backend side). is it possible? how should I separate this ports in director's config? it's easy for one port: for example lmtp - you just use passdb in protocol lmtp {}

3 5

[Dovecot] Issues with Plus addressing and detail part of subaddress.
by Sean Kamath 16 Jul '12

16 Jul '12

Hi all, So, it's been a while. I'm just ramping back up with Dovecot after a hiatus of a few years. I've been using it fine, complete with Sieve, for about a year, with little or no issues. I finally got around to setting up a second account, to start figuring out how I want to do some plus address filtering. In a nutshell, I want to put mail for foo+bar in foo's 'bar' folder. That's in the wiki. I did this: require ["fileinto", "envelope", "subaddress"]; if header :contains "subject" ["test"] { fileinto "Test"; } if envelope :detail "to" "test" { fileinto "test"; stop; } So, this fails miserably. No error message, nothing in the logs, no nothing. Yet, when I run sieve-test .dovecot.sieve /path/to/testmessage it works just fine. I even run sieve-test -e .dovecot.sieve /path/to/testmessage and it files it just fine into the folder. I tried adding some debug logging, but it looks like vnd.dovecot.debug isn't in my version. I searched the archives, and found a bit about adding (explicitly) the delimiter to the plugin section of 90-sieve.conf. So I did that. I'm running 2.0.13 of dovecot, and pigeonhole 0.2.3 on Solaris 10. Before I dive in and upgrade everything, am I missing something simple? The "test" bit works just fine (and in another account as well), so I think something's just not seeing the detail in subaddressing when mail is delivered (even though it works just fine with sieve-test). Thanks, Sean

3 3

[Dovecot] Migrating with dsync and INBOX.INBOX namespace issue
by Nikolai Schupbach 15 Jul '12

15 Jul '12

I'm working on migrating IMAP users from Mirapoint Message Servers to Dovecot servers. The Mirapoint IMAP server uses INBOX as a namespace for private mailboxes. I created the same namespace in Dovecot, but when I migrate mailboxes dsync seems to ignore/miss the namespace on Mirapoint and I end up with all mailboxes under a INBOX.INBOX hierarchy. Mirapoint Source Server ----------------------- * OK server.name Mirapoint IMAP4 3.8.3-GA server ready 1 LOGIN test(a)test.com test 1 OK User logged in 2 NAMESPACE * NAMESPACE (("INBOX." ".")) (("user." ".")) (("" ".")) 2 OK Completed 3 LIST "" * * LIST () "." "INBOX" * LIST () "." "INBOX.Draft" * LIST () "." "INBOX.Sent" * LIST () "." "INBOX.Trash" 3 OK Completed Running Dsync ------------- # doveadm -v -o imapc_host=server.name imapc_user=test(a)test.com -o imapc_password=test backup -R -u test(a)test.com imapc: dsync(test(a)test.com): Info: INBOX.INBOX.Sent: only in source (guid=7d3c7eaa71cdf47ee8a1192687cda8cd) dsync(test(a)test.com): Info: INBOX.INBOX.Draft: only in source (guid=a6a03ff3d6ec9066b46013f4affb109a) dsync(test(a)test.com): Info: INBOX.INBOX.Trash: only in source (guid=b36f688eae08506001091708006abe5a) dsync(test(a)test.com): Info: INBOX: only in source (guid=c92f64f79f0d1ed01e6d5b314f04886c) Dovecot Destination Server Post Dsync ------------------------------------- * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready. 1 LOGIN test(a)test.com test 1 OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE QUOTA ACL RIGHTS=texk] Logged in 2 NAMESPACE * NAMESPACE (("INBOX." ".")) NIL NIL 2 OK Namespace completed. 3 LIST "" * * LIST (\HasChildren) "." "INBOX" * LIST (\HasNoChildren) "." "INBOX.INBOX.Sent" * LIST (\HasNoChildren) "." "INBOX.INBOX.Trash" * LIST (\HasNoChildren) "." "INBOX.INBOX.Draft" 3 OK List completed. I noticed that Mirapoint IMAP also advertises a third empty namespace and I was wondering if this was causing it, but even if I explicitly set -n "INBOX." I still have the same issue. Below is my doveconf -n output: # 2.1.6: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 9.0-RELEASE-p3 amd64 auth_cache_negative_ttl = 0 auth_verbose = yes default_vsz_limit = 512 M deliver_log_format = subject=%s msgid=%m: %$ disable_plaintext_auth = no imapc_features = rfc822.size mail_gid = vmail mail_home = /mailstore/domains/%d/%n mail_location = mdbox:~/mdbox mail_plugins = quota acl mail_log notify mail_temp_dir = /var/tmp mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave spamtest namespace { inbox = yes location = prefix = INBOX. separator = . } passdb { args = /usr/local/etc/dovecot/dovecot-ldap-passdb.conf driver = ldap } plugin { acl = vfile:/usr/local/etc/dovecot/global-acls mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size quota = dict:User quota::file:%h/.dovecot-quota quota_warning = storage=95%% quota-warning 95 %u sieve = ~/.dovecot.sieve sieve_extensions = +spamtest sieve_max_redirects = 32 sieve_spamtest_max_value = 10 sieve_spamtest_status_header = X-Spam-Score sieve_spamtest_status_type = score } service auth-worker { user = $default_internal_user } service auth { client_limit = 5420 unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } user = $default_internal_user } service imap-login { process_min_avail = 12 service_count = 0 vsz_limit = 512 M } service imap { process_limit = 4096 vsz_limit = 512 M } service lmtp { process_min_avail = 12 user = vmail } service pop3-login { process_min_avail = 12 service_count = 0 vsz_limit = 512 M } service pop3 { process_limit = 1024 vsz_limit = 512 M } service quota-warning { executable = script /usr/local/bin/quota-warning unix_listener quota-warning { user = vmail } user = vmail } ssl = no userdb { args = /usr/local/etc/dovecot/dovecot-ldap-userdb.conf driver = ldap } verbose_proctitle = yes protocol imap { mail_max_userip_connections = 50 mail_plugins = quota acl mail_log notify imap_quota imap_acl } protocol lmtp { mail_plugins = quota acl mail_log notify sieve } Any help would be much appreciated. Regards, Nikolai.

1 1

[Dovecot] Maildir messages
by Nick＠5sg.eu 13 Jul '12

13 Jul '12

Hi all, Hopefully, I'm sending this to the right place... Can someone guide me on changing the Maildir messages files back to the single file format I used to have instead of the dovecot.index /cur /tmp /new format my newer server currently has. I'm running dovecot v1.2.9 postfix v2.7 on Ubuntu v10.4 Thanks, Nick. . . . . MU/Webcasting -- _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ . . . . . . . . Please join my Tech MeetUp group that meets in the NYC metro area Webcasting and Video Streaming Network: http://TheWebcasting.net . . . . . . . . _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/ _/

7 13

[Dovecot] imap-login: Panic: epoll_ctl(add, 6) failed: Invalid argument
by Angel L. Mateo 13 Jul '12

13 Jul '12

Hello, More problems (it seems that we won't be able to put our new servers in production). The problem now is that when we reach 1000 dovecot processes we have errors like: Jul 9 12:10:22 myotis31 dovecot: imap-login: Panic: epoll_ctl(add, 6) failed: Invalid argument Jul 9 12:10:22 myotis31 dovecot: imap-login: Fatal: master: service(imap-login): child 32251 killed with signal 6 (core dumps disabled) and server doesn't accept any new connection. Our servers are running in ubuntu 12.04 with kernel 3.2.0-24-generic kernel. I have found a similar problem at https://bugzilla.redhat.com/show_bug.cgi?id=681578 but it is for redhat kernel of series 2.6. Could be the same problem? Any pointer to this problem for ubuntu kernels? Or for generic 3.0 kernels? Any idea? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868887590 Fax: 868888337

3 5

[Dovecot] mail_log plugin logs UTF-8 mailbox name
by Ewald Dieterich 11 Jul '12

11 Jul '12

A small bug in the mail_log plugin: When I copy a mail from the inbox to a mailbox with special characters, the mailbox name is logged in UTF-8: [...] copy from INBOX: box=INBOX.Euro €, [...] I guess the name should be in mUTF-7, like it is done when I copy the other way round: [...] copy from Euro &IKw-: box=INBOX, [...]

2 2

[Dovecot] more info (more dsync problems)
by Jeff Gustafson 11 Jul '12

11 Jul '12

Rerunning the dsync command right after the timeout (see previous message) gave me these errors: dsync-local(vmail): Error: remote: dsync-remote(vmail): Error: Corrupted dbox file /home/.incoming_mail_migrations/users/user%domain.com/mdbox/s torage/m.60 (around offset=807789): msg header has bad magic value dsync-local(vmail): Error: remote: dsync-remote(vmail): Error: Corrupted dbox file /home/.incoming_mail_migrations/users/user%domain.com/mdbox/s torage/m.60 (around offset=807789): msg header has bad magic value dsync-local(vmail): Error: remote: dsync-remote(vmail): Warning: mdbox /home/.incoming_mail_migrations/users/user% domain.com/mdbox/storage: Inconsistency in map index (2,75904 != 2,82524) dsync-remote(vmail): Warning: mdbox /home/.incoming_mail_migrations/users/user% domain.com/mdbox/storage: rebuilding indexes dsync-local(vmail): Error: remote: dsync-remote(vmail): Error: Corrupted dbox file /home/.incoming_mail_migrations/users/user% domain.com/mdbox/storage/m.60 (around offset=807789): msg header has bad magic value dsync-local(vmail): Error: remote: dsync-remote(vmail): Warning: dbox: Copy of the broken file saved to /home/.incoming_mail_migrations/users/user% domain.com/mdbox/storage/m.60.broken dsync-local(vmail): Error: remote: dsync-remote(vmail): Error: Corrupted dbox file /home/.incoming_mail_migrations/users/user% domain.com/mdbox/storage/m.60 (around offset=807789): EOF reading msg header (got 0/30 bytes) dsync-local(vmail): Error: remote: dsync-remote(vmail): Warning: mdbox /home/.incoming_mail_migrations/users/user% domain.com/mdbox/storage: rebuilding indexes dsync-local(vmail): Error: remote: dsync-remote(vmail): Error: mdbox /home/.incoming_mail_migrations/users/user% domain.com/mdbox/storage: Duplicate GUID 1341304555.M433317P26661.n13,S=142447,W=144391 in m.62:790375 and m.60:790375

1 0

[Dovecot] more dsync problems: Error: proxy client timed out
by Jeff Gustafson 11 Jul '12

11 Jul '12

Hi all, I'm using dsync for backups. I recently upgraded to 2.1.7 due to issues with dsync mirror/backups. 2.1.7 fixed the issue with the guid conflict, but now I'm seeing this error on a couple of mailboxes: Error: proxy client timed out (waiting for output stream to flush, 0 bytes left) If there are 0 bytes left, why is it trying to flush? I'm using this command to backup the mailbox: dsync -vo mail_home=/home/users/user%domain.com backup ssh vmail(a)10.1.2.2 dsync -o mail_home=/home/.incoming_mail_migrations/users/user%adomain.com Any ideas? ...Jeff

1 0

Re: [Dovecot] Howto add another disk storage
by Stan Hoeppner 10 Jul '12

10 Jul '12

On 7/8/2012 5:16 PM, Matthias-Christian Ott wrote: > On 2012-07-08 23:29, Stan Hoeppner wrote: >> On 7/8/2012 8:27 AM, Patrick Domack wrote: >>> >>> Quoting Wojciech Puchar <wojtek(a)wojtek.tensor.gdynia.pl>: >>> >>>>> I think there are optimal situations where any configuration looks >>>>> good . . How often can a real-world disk actually deliver the 6Gbs >>>>> when only a minority of disk reads are long sequential runs on the >>>>> platters? >>>> none of hard drives can saturate 1.5Gb/s >>> >>> There are many disks out that do 150-200MB/sec, easily exceeding 1.5gb/s >>> speeds. >> >> There are a few SAS drives that can saturate a 150MB/s link, such as the >> Seagate Cheetah 15k.7, which can sustain 204MB/s streaming read on the >> outer tracks. >> >> But, again, streaming rate is irrelevant to mail storage. What matters >> is random seek latency. And the faster the spindle, the lower the >> latency. Thus 15k Seagate SAS drives are excellent candidates for mail >> store duty, as are any 10k or 15k drives. > > This is simply not true. SATA SSDs (~0,66 €/GB) are as expensive as the > 15k Seagate SAS HDDs (0,63 €/GB), but definitely faster. First, this sub discussion in this thread has been dealing strictly with mechanical storage, and that was intentional. Now you've injected solid state storage, and in the process you first disagreed with my statement, then agreed with it. Apparently you didn't realize you did so. Would you please clarify what I stated that is "simply not true"? You comment WRT SSD doesn't prove anything I said to be untrue. Quite the contrary, you reinforced my statements. -- Stan

11 25

[Dovecot] recover .sieve plaintext from .sievec binary file
by Florin Andrei 10 Jul '12

10 Jul '12

Hi, I upgraded a server from an old Linux distribution to a much newer one. In the process, Dovecot got upgraded from v1 to v2. By mistake, I deleted the .sieve plaintext file with all the Sieve filters, but I still do have the .sievec compiled binary. Is there any way to dump the binary file back into plaintext format? Keep in mind, I'm running v2 now, and the binary was made on a v1 Dovecot server. Thanks. -- Florin Andrei http://florin.myip.org/

3 4

[Dovecot] configuring imap_stats
by Reinhard Vicinus 09 Jul '12

09 Jul '12

Hi, i'm trying to configure imap_stats like it's documented in the wiki: http://wiki2.dovecot.org/Statistics. But as soon as i activate the imap_stats plugin i get the following error message trying to login via imap: dovecot: imap: Error: Can't load plugin imap_stats_plugin: Plugin stats must be loaded also (you must set: mail_plugins=$mail_plugins stats) But the stats plugin is configured as you can see in the attached configurations. Also i can get statistics without the imap_stats enabled, but as far as i know only of the pop3 users. Kind regards Reinhard

2 1

[Dovecot] mailboxes missing after upgrade from 2.1.4 to 2.1.7
by Micah Anderson 09 Jul '12

09 Jul '12

Hi all, I mentioned this on the #dovecot irc channel, but I thought I would post here so I can provide more details. The basic problem is that when I upgraded from 2.1.4 to 2.1.7, some users no longer are able to see their folders in pine/alpine. The folders are actually there, and are subscribed (according to doveadm) and its possible to do operations on those folders, if you know the name (for example, opening the folder works fine if you know the name). When I downgrade to 2.1.4 again, the folders appear again, so its clearly something that changed between the two versions. I looked through the changelog, and found a few possibile culprits, I think pine/alpine use imapc, so that could be related: . imapc: Use imapc_list_prefix also for listing subscriptions . Fixed looking up parent mailbox name with different namespace vs. layout separators. . imapc: Don't list mailboxes that don't match list patterns. . layout=fs: Fixed listing mailboxes with prefix=INBOX/ . LIST with mailbox {} settings incorrectly set subscribed-flags. Here is my dovecot -n output: # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.5 auth_default_realm = example.net auth_verbose = yes default_process_limit = 256 default_vsz_limit = 512 M dict { expire = mysql:/etc/dovecot/dovecot-dict-sql.conf quota = mysql:/etc/dovecot/dovecot-dict-sql.conf } disable_plaintext_auth = no first_valid_gid = 8 first_valid_uid = 8 last_valid_gid = 8 last_valid_uid = 8 listen = * login_greeting = howdy, ready. mail_location = mdbox:~/mdbox:INDEX=/srv/dovecot_indexes/%d/%1n/%n mail_plugins = expire quota zlib stats maildir_very_dirty_syncs = yes namespace { inbox = yes location = prefix = separator = . } namespace { alias_for = hidden = yes inbox = no list = no location = prefix = INBOX. separator = . } passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } plugin { antispam_allow_append_to_spam = yes antispam_backend = pipe antispam_debug_target = syslog antispam_pipe_program = /usr/local/bin/train_spam antispam_pipe_program_args = -d;10.0.1.109 antispam_pipe_program_notspam_arg = ham antispam_pipe_program_spam_arg = spam antispam_pipe_tmpdir = /var/tmp antispam_signature = X-Spam-Flag antispam_signature_missing = error antispam_spam_pattern_ignorecase = SPAM antispam_trash_pattern = trash;Trash;Deleted * expire = Trash expire2 = Trash/* expire3 = Spam expire_dict = proxy::expire quota = dict:Your mail quota::proxy::quota quota_rule = *:bytes=100663296 quota_rule2 = Trash:bytes=+20%% quota_rule3 = Spam:bytes=+10%% quota_rule4 = INBOX.Trash:bytes=+20%% quota_rule5 = INBOX.Spam:bytes=+10%% quota_rule6 = INBOX.restored_from_backups:bytes=+500%% sieve = ~/.dovecot.sieve sieve_after = /var/lib/dovecot/sieve/after.sieve sieve_before = /var/lib/dovecot/sieve/default.sieve sieve_dir = ~/sieve stats_refresh = 30 secs stats_track_cmds = yes zlib_save = gz zlib_save_level = 6 } postmaster_address = postmaster(a)example.net protocols = " imap pop3" service anvil { unix_listener anvil { group = dovecot mode = 0660 user = root } } service auth { unix_listener auth-userdb { group = mail mode = 0600 user = mail } } service dict { unix_listener dict { group = mail mode = 0600 user = mail } } service imap-login { process_min_avail = 10 service_count = 0 vsz_limit = 512 M } service imap-postlogin { executable = script-login /usr/local/sbin/postlogin_imap } service imap { executable = imap imap-postlogin process_limit = 2048 } service pop3-login { process_min_avail = 10 service_count = 0 vsz_limit = 512 M } service pop3-postlogin { executable = script-login /usr/local/sbin/postlogin_pop } service pop3 { executable = pop3 pop3-postlogin } service stats { fifo_listener stats-mail { mode = 0600 user = mail } } ssl_cert = </etc/certs/wildcard/cert.pem ssl_cipher_list = HIGH:-ADH:-aNULL ssl_key = </etc/certs/wildcard/key.pem userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } verbose_proctitle = yes protocol lda { mail_plugins = expire quota zlib stats sieve plugin { quota_exceeded_message = Sorry, your message cannot be delivered to that person because their mailbox is full. If you can contact them another way, you may wish to tell them of this problem. quota_rule7 = INBOX:bytes=+10%% } } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep mail_max_userip_connections = 20 mail_plugins = expire quota zlib stats imap_quota imap_zlib antispam imap_stats plugin { quota_exceeded_message = You are over quota. To avoid losing mail, immediately empty your Trash and Sent folders and delete emails with large attachments. Visit https://help.example.net/quota for more help. } } protocol pop3 { mail_plugins = expire quota zlib stats pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %g } As requested by tss in #dovecot, I attempted to add 'rawlog' to: service imap-postlogin { executable = script-login /usr/local/sbin/postlogin_imap } to get: service imap-postlogin { executable = script-login rawlogin /usr/local/sbin/postlogin_imap } but with that, it doesn't even open the INBOX folder, and there is nothing in the user's rawlog folder, I get this error: dovecot: imap-postlogin: Error: Fatal: This process must not be run as root it didn't open even the INBOX imap folder I went over the http://wiki2.dovecot.org/Debugging/Rawlog and made sure everything was correct there, but it still didn't work right. Any ideas or suggestions of things to try would be greatly appreciated! thanks, micah --

1 1

[Dovecot] Howto add another disk storage
by Adrian Minta 09 Jul '12

09 Jul '12

Hi all What is the best strategy to add another storage to an existing virtual mail system ? Move some domains to the new storage and create symlinks ? Switch to dovecot hashing ? But in this case what is the easy-east way to migrate ? Thanks for any suggestions or tips !

15 50

Re: [Dovecot] Dovecot 2.1.8 crashes when doing POP3 UIDL on empty INBOX
by Joseph Tam 08 Jul '12

08 Jul '12

Timo Sirainen <tss(a)iki.fi> writes: >> #0 i_panic (format=0xff2302f8 "Trying to allocate %u bytes") at failures.c:259 >> #1 0xff2068a4 in pool_alloconly_malloc (pool=0x60330, size=0) at mempool-alloconly.c:259 >> #2 0x00018248 in client_uidls_save (client=0x54d28) at pop3-commands.c:761 >> #3 0x00018444 in cmd_uidl_init (client=0x54d28, seq=0) at pop3-commands.c:793 >> #4 0x000185a8 in cmd_uidl (client=0x54d28, args=0x19eb8 "") at pop3-commands.c:824 >> #5 0x00018a24 in client_command_execute (client=0x54d28, name=0x2b550 "UIDL", args=0x19eb8 "") >> at pop3-commands.c:889 > > Fixed: http://hg.dovecot.org/dovecot-2.1/rev/ea18b2ddb67b > > Date: Sat, 7 Jul 2012 05:52:03 +0300 2 hours after I reported it; do you ever sleep?! Thanks. Joseph Tam <jtam.home(a)gmail.com>

4 3

[Dovecot] + sub addressing setup
by Voytek Eymont 07 Jul '12

07 Jul '12

I have Dovecot/Postfix/MySQL/PostfixAdmin, I'd like to setup + sub addressing (for +spam and possibly user-defined +folders) I have setup a user+spam folder path in PostfixAdmin as so; vvv+spam@tld path:tld/vvv@tld/.spam/ that requires me to put a 'duplicate' user with the + and +path for each user, the folks on PostfixAdmin suggested that Dovecot might have a better way of handling this, how do I accomplish this in Dovecot ? thanks for any suggestions or tips -- Voytek

2 6

[Dovecot] Dovecot 2.1.8 crashes when doing POP3 UIDL on empty INBOX
by Joseph Tam 07 Jul '12

07 Jul '12

I noticed a bunch of crashes when Gmail users tried to slurp up their (empty) mailboxes. The problem is not noticed by clients though, but it crashes the pop3 process. POP3 session S: +OK Ready. C: USER user S: +OK C: PASS password S: +OK Logged in. C: UIDL ... server crash and disconnects ... Resulting log Jul 06 16:58:05 pop3(user): Panic: Trying to allocate 0 bytes Jul 06 16:58:05 pop3(user): Error: Raw backtrace: 0xff1e6454 -> 0xff1e4f78 -> 0xff20689c -> 0x18240 -> 0x1843c - > 0x185a0 -> 0x18a1c -> 0x1576c -> 0x159cc -> 0xff1fee6c -> 0xff200e24 -> 0xff1fef60 -> 0xff1d8010 -> 0x13584 - > 0x1285c Jul 06 16:58:14 pop3(user): Fatal: master: service(pop3): child 24972 killed with signal 6 (core dumps disabled) GDB traceback: #0 i_panic (format=0xff2302f8 "Trying to allocate %u bytes") at failures.c:259 #1 0xff2068a4 in pool_alloconly_malloc (pool=0x60330, size=0) at mempool-alloconly.c:259 #2 0x00018248 in client_uidls_save (client=0x54d28) at pop3-commands.c:761 #3 0x00018444 in cmd_uidl_init (client=0x54d28, seq=0) at pop3-commands.c:793 #4 0x000185a8 in cmd_uidl (client=0x54d28, args=0x19eb8 "") at pop3-commands.c:824 #5 0x00018a24 in client_command_execute (client=0x54d28, name=0x2b550 "UIDL", args=0x19eb8 "") at pop3-commands.c:889 #6 0x00015774 in client_handle_input (client=0x54d28) at pop3-client.c:629 #7 0x000159d4 in client_input (client=0x54d28) at pop3-client.c:682 #8 0xff1fee74 in io_loop_call_io (io=0x37298) at ioloop.c:379 #9 0xff200e2c in io_loop_handler_run (ioloop=0x34138) at ioloop-poll.c:211 #10 0xff1fef68 in io_loop_run (ioloop=0x34138) at ioloop.c:398 #11 0xff1d8018 in master_service_run (service=0x33c88, callback=0x13120 <client_connected>) at master-service.c:543 #12 0x0001358c in main (argc=1, argv=0xffbffe0c) at main.c:268 Some non-trivial changes in pop3-commands.c were done between 2.1.3 and 2.1.8 (expecially pop3_uidl_duplicates changes in 2.1.7). I guess this bug has crept in there. Joseph Tam <jtam.home(a)gmail.com>

2 1

[Dovecot] Pigeonhole Sieve SetFlag question
by Vyacheslav Biruk 06 Jul '12

06 Jul '12

Hello, I use FreeBSD 8.2-RELEASE-p7 i386 dovecot-2.1.6 dovecot-pigeonhole-0.3.0_1 I have the following problem: When I use the following script - the flag is set in \Seen : require ["imap4flags"]; # rule:[test] if anyof (header :contains "Subject" "test") { setflag "\\Seen"; stop; } . SELECT INBOX * OK [CLOSED] Previous mailbox closed. * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 1 EXISTS * 1 RECENT * OK [UIDVALIDITY 1338600150] UIDs valid * OK [UIDNEXT 9] Predicted next UID * OK [NOMODSEQ] No permanent modsequences . OK [READ-WRITE] Select completed. . FETCH 1 (UID FLAGS BODY.PEEK[HEADER.FIELDS (DATE SUBJECT)]) * 1 FETCH (UID 8 FLAGS (\Seen \Recent) BODY[HEADER.FIELDS (DATE SUBJECT)] {57} Date: Fri, 6 Jul 2012 14:02:49 +0000 Subject: test 1 ) . OK Fetch completed. But when I use following script - the flag is not set in \Seen require ["fileinto","imap4flags"]; # rule:[test] if anyof (header :contains "Subject" "test") { fileinto "INBOX.SPAM"; setflag "\\Seen"; stop; } . SELECT INBOX.SPAM * OK [CLOSED] Previous mailbox closed. * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS (\Answered \Flagged \Deleted \Seen \Draft \*)] Flags permitted. * 1 EXISTS * 1 RECENT * OK [UNSEEN 1] First unseen. * OK [UIDVALIDITY 1338600159] UIDs valid * OK [UIDNEXT 7] Predicted next UID * OK [NOMODSEQ] No permanent modsequences . OK [READ-WRITE] Select completed. . FETCH 1 (UID FLAGS BODY.PEEK[HEADER.FIELDS (DATE SUBJECT)]) * 1 FETCH (UID 6 FLAGS (\Recent) BODY[HEADER.FIELDS (DATE SUBJECT)] {57} Date: Fri, 6 Jul 2012 13:53:29 +0000 Subject: test 1 ) . OK Fetch completed. so it should be or is it a bug? -- Best regards, magic

3 2

[Dovecot] I changed the separator from . to / and it still seems to work.
by Hans de Groot 06 Jul '12

06 Jul '12

Hello, Just as an experiment I changed the separator from . to / restarted dovecot (v2.1.1). When adding an existing account with lots of mail folders to thunderbird everything still seems to work. My directory layout is like this: .Info.mailinglists .Info.mailinglists.Horde .Info.mailinglists.modperl .Info.mailinglists.PDNS .Info.mailinglists.Sogo .Info.mailinglists.tinc .Info.mailinglists.Zabbix I added a new folder to the horde mailing using thunderbird list and got an extra folder .Info.mailinglists.Horde.testinhorde Does this mean the separator has nothing to do with the . in the directory names and I am safe to switch saparators without having to do anything else? Regards Hans de Groot

1 0

[Dovecot] Dovecot v2 shared mailboxes , a . separator and complete emailaddress as username.
by Hans de Groot 06 Jul '12

06 Jul '12

Hello, I've been trying to get shared mailboxes to work and got stuck. I tried lots of examples made the shared dict but the shared mail boxes never showed up. I am using the . separator and I think this the problem. I changed it to a / separator and now I could see my shared mailboxes. Checking the maillog in debug mode I saw a few failed login attempts between the succesful logins. The weird thing is that the username was changed, instead of hansg(a)debushalte.nl the login was hansg@debushalte without the .nl part and that user is not in my database. So I suspect that dovecot splits the shared path based hansg(a)debushalte.nl shares mailboxes with dean(a)debushalte.nl below a few lines from the log: Debug: Namespace : type=shared, prefix=INBOX.shared.%u., sep=., inbox=no, hidden=no, list=yes, subscriptions=no location=maildir:%h/mail:INDEX=/mail/debushalte.nl/dean/mail/shared.%u Debug: shared: Tried to access mails of nonexistent user hansg@debushalte Debug: Namespace INBOX.shared.hansg@debushalte.: Creating storage despite: Root mail directory doesn't exist Is there a work arround for this? I really like to keep using '.' as a seperator so I do not have to change all the existing mailboxes. If I do rename and move all existing mailboxes the '/' separator way and of course change the separator in the namespaces would my users notice this? (ie would they have to change something in their mail clients?) Regards Hans

1 0

[Dovecot] dovecot and nfs readdir vs readdirplus operations
by Angel L. Mateo 06 Jul '12

06 Jul '12

Hello, We are having performance problems trying to migrate our pop/imap servers to a new version. Our old servers are 4 debian lenny with 5GB of RAM running of XenServer VMs with kernel 2.6.32-4-amd64 and dovecot 1.1.16. New servers are 4 ubuntu 12.04 with dovecot 2.1.5 running on vmware vm with 6 cores and 16GB of RAM and kernel 3.2.0-24-generic. On both server we are using nfs 3 with same configuration (regardless of internal kernel differences, but we have no customized any of them, we are using vanilla kernels with default configurations). The problem we have is that new servers have performance problems. Even when have a small part of our total users (about 25%) directed to the new farm, performance is very poor, even useless. Looking for NFS problems, we have found a lot of differences in nfs operations. For example, this is the nfsstat of one of a new servers at this moment: myotis21:~# nfsstat Client rpc stats: calls retrans authrefrsh 414528349 885 37 Client nfs v3: null getattr setattr lookup access readlink 0 0% 95673837 23% 3961938 0% 89586364 21% 110097351 26% 2930961 0% read write create mkdir symlink mknod 20009850 4% 6065319 1% 3757720 0% 1557 0% 0 0% 0 0% remove rmdir rename link readdir readdirplus 6378134 1% 281 0% 2602358 0% 555097 0% 53126619 12% 15615402 3% fsstat fsinfo pathconf commit 113256 0% 26152 0% 0 0% 4026151 0% and this is the same on one of the new ones: amateo_adm@myotis31:~$ nfsstat Server rpc stats: calls badcalls badclnt badauth xdrcall 0 0 0 0 0 Client rpc stats: calls retrans authrefrsh 178040318 675 178040800 Client nfs v3: null getattr setattr lookup access readlink 0 0% 24350345 13% 5045924 2% 10939469 6% 30185146 16% 142865 0% read write create mkdir symlink mknod 8818016 4% 6058614 3% 2877653 1% 420 0% 0 0% 0 0% remove rmdir rename link readdir readdirplus 2842562 1% 69 0% 2961239 1% 634038 0% 0 0% 82921863 46% fsstat fsinfo pathconf commit 70861 0% 18754 0% 9377 0% 152702 0% Although nfs configuration is the same, there are a lot of differences on readdir vs readdirplus nfs operations. In fact, in the old one we have 12% readdir operations and 3% of readdirplus. And in the new one we have 46% of readdirplus and no readdir operations. Although readdirplus is supposed to be an optimization in nfs3, in situations when you have big directories and uses just a few entries of these directories it could be worse. So we think if this could be the problem (or one of them). Any idea of this difference? And if this difference could be significative? PS: I have attached doveconf -n of the new server. -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868887590 Fax: 868888337

5 12

[Dovecot] Dovecot mailstorage migration uppon logging / delivery with dsync
by Xavier Beaudouin 05 Jul '12

05 Jul '12

Hi there, I have a pretty standard setup with "simple" dovecot 2,0 configuration (eg /var/mailboxes on NFS with old netapp) and local ldap directory and Maildir. I wanted to find a good way to migrate from NFS old netapp to NFS new server (this one is not a netapp !). There 3 kind way (according to my own experience) - rsync old spool to new spool being patient stop services and then doing last rsync and mount /var/mailboxes mount point from old netapp to new nfs server). - doing imap_login (and other stuff like this) doing an rsync per box AFTER doing the first rsync with all boxes... - using dsync to fetch the maildir stuff from old server to new one, doing a simple flag, and doing "au fil de l'eau" migration. The last one seems to me a good idea, but I cannot figure host to make this correctly. Any hints or do someone here has already done this kind of stuff? Kind regards, -- Xavier Beaudouin

2 1

[Dovecot] Migration Question
by Peter Fraser 05 Jul '12

05 Jul '12

Hi all I got a shiny new server and I want to install the latest and greatest of everything on it. The old server has dovecot-1.2.17 working with postfix-2.8.4,1, dovecot quotas, sieve etc. My question is: Would it work of I installed dovecot 2 on this server along with everything I want and just copy the /home/virtualmail directory where all the user mail directories are? I use the Maildir format by the way.

3 2

[Dovecot] error: director left/right disconnected
by Patrick Westenberg 05 Jul '12

05 Jul '12

Hello, yesterday I set up a second director and even it works fine, some errors occur in the logfile on the new director: director: Error: Director 172.17.1.3:9090/left disconnected director: Error: Director 172.17.1.3:9090/right disconnected 172.17.1.3 belongs to the first director which has no errors. Where is the problem? Regards Patrick # 2.1.7: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.5 auth_debug = yes auth_verbose = yes director_mail_servers = 172.17.1.1 director_servers = 172.17.1.3 172.17.1.4 lmtp_proxy = yes log_path = /var/log/dovecot.log managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave passdb { args = proxy=y nopassword=y starttls=any-cert driver = static } protocols = imap pop3 lmtp sieve service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { user = dovecot } } service director { fifo_listener login/proxy-notify { mode = 0666 } inet_listener { address = 172.17.1.4 port = 9090 } unix_listener director-userdb { mode = 0600 } unix_listener login/director { mode = 0666 } } service imap-login { executable = imap-login director } service lmtp { inet_listener lmtp { address = 172.17.1.4 port = 24 } } service managesieve-login { executable = managesieve-login director inet_listener sieve { port = 4190 } } service pop3-login { executable = pop3-login director } ssl_cert = </etc/ssl/certs/imap.wk-serv.de.crt ssl_key = </etc/ssl/private/imap.wk-serv.de.key protocol lmtp { auth_socket_path = director-userdb } # 2.1.6: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-amd64 x86_64 Debian 6.0.5 director_mail_servers = 172.17.1.1 director_servers = 172.17.1.3 172.17.1.4 lmtp_proxy = yes log_path = /var/log/dovecot.log managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave passdb { args = proxy=y nopassword=y starttls=any-cert driver = static } protocols = imap pop3 lmtp sieve service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { user = dovecot } } service director { fifo_listener login/proxy-notify { mode = 0666 } inet_listener { address = 172.17.1.3 port = 9090 } unix_listener director-userdb { mode = 0600 } unix_listener login/director { mode = 0666 } } service imap-login { executable = imap-login director } service lmtp { inet_listener lmtp { address = 172.17.1.3 port = 24 } } service managesieve-login { executable = managesieve-login director inet_listener sieve { port = 4190 } } service pop3-login { executable = pop3-login director } protocol lmtp { auth_socket_path = director-userdb }

2 1

[Dovecot] dict Panic after upgrade to 2.1.7
by ckubu 03 Jul '12

03 Jul '12

Hello, after upgrade my mailsystem to dovecot version 2.1.7, dovecot doesn't work properly. something went wrong in dict service connecting the postgres backend. that happens not on every connection. the db connection data are correct, no difference connecting via tcp or linux socket. dovecot log entries: Jun 23 23:19:10 mx dovecot: dict: Panic: file driver-pgsql.c: line 84 (driver_pgsql_set_state): assertion failed: (state == SQL_DB_STATE_BUSY || db- >cur_result == NULL) Jun 23 23:19:10 mx dovecot: dict: Error: Raw backtrace: /usr/local/dovecot-2.1.7/lib/dovecot/libdovecot.so.0(+0x4478a) [0x7ffc7d8e578a] -> /usr/local/dovecot-2.1.7/lib/dovecot/libdovecot.so.0(+0x447d6) [0x7ffc7d8e57d6] -> /usr/local/dovecot-2.1.7/lib/dovecot/libdovecot.so.0(i_error+0) [0x7ffc7d8bc5ef] -> dovecot/dict() [0x40a9a6] -> dovecot/dict() [0x40aa01] -> dovecot/dict() [0x40be43] -> dovecot/dict() [0x409474] -> dovecot/dict(sql_db_cache_deinit+0x20) [0x4089d0] -> dovecot/dict(main+0x169) [0x4059f9] -> /lib/libc.so.6(__libc_start_main+0xfd) [0x7ffc7d335c8d] -> dovecot/dict() [0x404b59] Jun 23 23:19:10 mx dovecot: dict: Fatal: master: service(dict): child 13812 killed with signal 6 (core dumps disabled) Jun 23 23:23:09 mx dovecot: dict: Error: dict sql iterate failed: Not connected to database Jun 23 23:23:09 mx dovecot: pop3(xxx(a)yyy.zz): Error: acl: dict iteration failed, can't update dict Jun 23 23:23:09 mx dovecot: dict: Error: dict sql iterate failed: Not connected to database Jun 23 23:23:09 mx dovecot: pop3(xxx(a)yyy.zz): Error: acl: dict iteration failed, can't update dict Jun 23 23:23:17 mx dovecot: dict: Error: dict sql lookup failed: Not connected to database Jun 23 23:23:17 mx dovecot: imap(xxx(a)yyy.zz): Error: Internal quota calculation error Jun 23 23:23:19 mx dovecot: dict: Error: dict sql lookup failed: Not connected to database Jun 23 23:23:40 mx dovecot: dict: Error: dict sql lookup failed: Not connected to database maybe i have missconfigured the dovecot system, but i don't find the mistake. can anybody give me a hint ? best wiches christoph ----- doveconf -n # 2.1.7: /usr/local/dovecot-2.1.7/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-5-vserver-amd64 x86_64 Debian 6.0.5 ext3 auth_mechanisms = plain login digest-md5 cram-md5 apop auth_socket_path = /var/run/dovecot/auth-userdb auth_username_translation = %@ auth_verbose = yes auth_verbose_passwords = plain base_dir = /var/run/dovecot/ dict { acl = pgsql:/usr/local/dovecot/etc/dovecot/sql-dict.conf.ext expire = pgsql:/usr/local/dovecot/etc/dovecot/sql-dict.conf.ext quota = pgsql:/usr/local/dovecot/etc/dovecot/sql-dict.conf.ext } disable_plaintext_auth = no first_valid_gid = 5000 first_valid_uid = 5000 hostname = mx.warenform.de last_valid_gid = 5000 last_valid_uid = 5000 listen = 178.63.63.151 2a01:4f8:121:c5::2 mail_gid = vmail mail_location = maildir:/var/vmail/%d/%n/Maildir mail_plugins = autocreate quota expire acl mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { list = children location = maildir:/var/vmail/%%d/%%n/Maildir:INDEX=~/Maildir/shared/%%u prefix = shared/%%u/ separator = / subscriptions = no type = shared } namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Spam { special_use = \Junk } mailbox Trash { special_use = \Trash } prefix = separator = / type = private } passdb { args = /usr/local/dovecot/etc/dovecot/sql-connect.conf.ext driver = sql } plugin { acl = vfile acl_shared_dict = proxy::acl autocreate = Spam autocreate2 = Sent autocreate3 = Trash autocreate4 = Drafts autosubscribe = Spam autosubscribe2 = Sent autosubscribe3 = Trash autosubscribe4 = Drafts expire = Trash expire2 = Trash.* expire3 = Spam expire_dict = proxy::expire quota = dict:User quota::proxy::quota quota_rule = *:storage=1G quota_rule2 = Trash:storage=+200M quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u recipient_delimiter = sieve = ~/.dovecot.sieve sieve_before = /usr/local/dovecot/etc/dovecot/sieve/move-spam.sieve sieve_dir = ~/sieve sieve_global_dir = /usr/local/dovecot/etc/dovecot/sieve/global/ } postmaster_address = admin(a)warenform.de protocols = imap pop3 sieve lmtp service auth { unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } } service dict { unix_listener dict { mode = 0600 user = vmail } } service imap-login { inet_listener imap { address = 127.0.0.1 178.63.63.151 2a01:4f8:121:c5::2 } inet_listener imaps { address = 178.63.63.151 2a01:4f8:121:c5::2 } process_min_avail = 16 } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service managesieve-login { inet_listener sieve { address = 127.0.0.1 port = 4190 } } service pop3-login { inet_listener pop3 { address = 178.63.63.151 2a01:4f8:121:c5::2 } inet_listener pop3s { address = 178.63.63.151 2a01:4f8:121:c5::2 } } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = vmail } user = dovecot } shutdown_clients = no ssl_cert = </etc/postfix/ssl/servercert.pem ssl_key = </etc/postfix/ssl/servercert.pem syslog_facility = local1 userdb { args = /usr/local/dovecot/etc/dovecot/sql-connect.conf.ext driver = sql } protocol lmtp { mail_plugins = autocreate quota expire acl sieve } protocol lda { mail_plugins = autocreate quota expire acl sieve } protocol imap { imap_client_workarounds = delay-newmail mail_max_userip_connections = 24 mail_plugins = autocreate quota expire acl imap_quota imap_acl ssl_cert = </etc/postfix/ssl/imap_warenform_de.crt ssl_key = </etc/postfix/ssl/imap_warenform_de.key } protocol pop3 { mail_max_userip_connections = 10 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh ssl_cert = </etc/postfix/ssl/pop_warenform_de.crt ssl_key = </etc/postfix/ssl/pop_warenform_de.key } ----- sql-dict.conf.ext: connect = host=/var/run/postgresql user=db_user password=db_passwd dbname=db_name # quota map { pattern = priv/quota/storage table = quota2 username_field = username value_field = bytes } map { pattern = priv/quota/messages table = quota2 username_field = username value_field = messages } # expires map { pattern = shared/expire/$user/$mailbox table = expires value_field = expire_stamp fields { username = $user mailbox = $mailbox } } # acl map { pattern = shared/shared-boxes/user/$to/$from table = user_shares value_field = dummy fields { from_user = $from to_user = $to } } map { pattern = shared/shared-boxes/anyone/$from table = anyone_shares value_field = dummy fields { from_user = $from } } -- e: ckubu(a)so36.net

2 3

[Dovecot] Outlook 2010 very slow when using IMAP - are there any tweaks?
by Kaya Saman 03 Jul '12

03 Jul '12

Hi, though this is a bit of a side question, has anybody had an issue while running Outlook 2010 with Dovecot? The reason why I am asking is that I have setup a Dovecot 2.1.7 server on FreeBSD which works fantastically with Thunderbird but Outlook seems to be twice as slow in transferring information across?? # dovecot -n # 2.1.7: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 8.2-RELEASE amd64 auth_debug = yes auth_mechanisms = plain ntlm login auth_use_winbind = yes auth_username_format = %n auth_verbose = yes auth_winbind_helper_path = /usr/local/bin/ntlm_auth disable_plaintext_auth = no info_log_path = /var/log/dovecot-info.log log_path = /var/log/dovecot.log mail_gid = mail_user mail_home = /mail/AD_Mail/%Ld/%Ln mail_location = maildir:~/Maildir mail_uid = mail_user passdb { args = failure_show_msg=yes driver = pam } pop3_fast_size_lookups = yes pop3_lock_session = yes pop3_no_flag_updates = yes protocols = imap pop3 ssl = no userdb { driver = static } Since (like most corporate organizations out there) we solely run Outlook coupled to Exchange, this excersize was meant to be a way of getting rid of PST files. We don't run out own Exchange however, and don't have any control over it either. My workaround was to simply use the Outlook GUI space to transfer emails between Exchange and Dovecot running the IMAPv4 protocol. For whatever reason Outlook is being really garbage about dealing with stuff and since I don't know Outlook or MS products very well (being your typical average OpenSource guy) I was wondering if there were any tweaks that could be made within Outlook to speed it up or in Dovecot to work better with Outlook? I guess one could get sidetracked into the argument of mdbox vs. Maildir from my config however, Thunderbird is really fast and transfers large amounts of data really easily. Reaches round 130Mbps using nload performance grapher, while Outlook only manages ~50kbps but spikes at 2-3Mbps on occassion. Can anyone offer any guidence or assistance in this matter?? Actually wherever I run Dovecot, including my servers at home, it is fast and reliable. Yes I know MS is the polar opposite of anything worth using however, my company won't change and I'm stuck banging my head against the wall while trying to get MS to interface with ANYTHING..... Regards, Kaya

16 64

[Dovecot] Problem with 'doveadm mailbox status -t' reporting cumulative vsizes after upgrading from v2.0.16 to v2.1.7
by Jase Thew 03 Jul '12

03 Jul '12

Hi, I upgraded from Dovecot v2.0.16 to v2.1.7 over night and I noticed this morning that one of my daily reports which lists summarised mailbox sizes per user has started listing nonsense for vsizes. The reporting script at its core calls : doveadm -f flow mailbox status -A -t 'messages vsize' '*' It appears that Dovecot 2.1.7 is not resetting the vsize after collating the sum total of mailboxes sizes for each user, so that vsize just constantly increases as it iterates over each user. Eg: # doveadm -f flow mailbox status -A -t 'messages vsize' '*' accounts(a)example.com messages=1 vsize=759 adam(a)example.com messages=0 vsize=759 amy(a)example.com messages=24 vsize=51699697 andy(a)example.com messages=5446 vsize=3220940815 anna(a)example.com messages=50 vsize=3224035563 careers(a)example.com messages=1 vsize=3224036311 craig(a)example.com messages=2471 vsize=4421343199 creative(a)example.com messages=189 vsize=4426884182 david(a)example.com messages=8 vsize=4440729729 davidw(a)example.com messages=0 vsize=4440729729 enquiries(a)example.com messages=1 vsize=4440730491 gemma(a)example.com messages=4109 vsize=6349098844 gin(a)example.com messages=86 vsize=6392599904 holly(a)example.com messages=2000 vsize=7200342663 ian(a)example.com messages=0 vsize=7200342663 info(a)example.com messages=4 vsize=7200558689 jackie(a)example.com messages=2 vsize=7200721146 jade(a)example.com messages=137 vsize=7210548548 jake(a)example.com messages=16667 vsize=15260532446 katie(a)example.com messages=1 vsize=15260533375 mark(a)example.com messages=0 vsize=15260533375 mike.a(a)example.com messages=9 vsize=15261474205 mike.s(a)example.com messages=296 vsize=15314352543 mike(a)example.com messages=6357 vsize=20631446344 nick(a)example.com messages=1184 vsize=21038046728 social(a)example.com messages=65 vsize=21038935461 will(a)example.com messages=85 vsize=21057572390 [SNIP] The same occurs with -u '*(a)example.com' in place of -A, and also for 'all' in place of 'messages vsize'. Is this expected behaviour in 2.1.x compared to 2.0.x, or have I stumbled upon a bug? Regards, Jase Thew.

2 2

[Dovecot] Dovecot shared library to replace libc-client
by Asheesh Laroia 03 Jul '12

03 Jul '12

Hi all Dovecotters, Lots of programs (e.g, PHP) link to a library called c-client, which is a derivative of the original IMAP implementation, UW IMAP. (For those new to UW IMAP, read here: http://www.washington.edu/imap/ ) UW IMAP is not in as much of active development as it used to be, so I am curious: I see there is a dovecot shared library. I haven't looked into the details, but here are things I'm interested in: 1. Replacing libc-client's use as a client library In Debian, for example, you can search for packages that depend on this library as a client. It looks like this: $ ~ apt-cache rdepends libc-client2007e libc-client2007e Reverse Depends: uw-mailutils uw-imapd libc-client2007e-dev ipopd prayer php5-imap mailsync libmail-cclient-perl asterisk aolserver4-nsimap uw-mailutils libc-client2007e-dev prayer php5-imap mailsync libmail-cclient-perl asterisk-voicemail-imapstorage Let's say, hypothetically, we wanted to switch php5-imap to using Dovecot where it currently uses libc-client. I envision creating libdovecot-c-client-alike that is a set of headers and a library that is API-compatible with (at least a subset of) c-client. You can call that a "compatibility shim." Then e.g. php5-imap could be given the path to those headers and the corresponding libdovecot-c-client-alike library, and when it thinks it is linking to c-client, it could instead link to the libdovecot-c-client-alike. This might be convenient if you want to limit how much of a public API is presented by the current "dovecot.so" that gets installed in e.g. /usr/lib/dovecot/. The compatiblity shim could have a small API, and if you don't want provide ABI guarantees within dovecot.so, the shim could dlopen() dovecot.so rather than link to it. 2. Use of Dovecot shared library within alpine, embedding the imapd Right now, the mail client "alpine" embeds a copy of the UW IMAP source. It uses this when accessing local mail spools, for example. If Dovecot's IMAPd were available as a shared library, perhaps with a c-client-like API, (although not necessarily -- it would be feasible to upgrade alpine to a different API), then alpine could use Dovecot's mail drivers directly. So, those two are the dream. Timo and others, what are your thoughts? Thanks for reading this far! -- Asheesh. P.S. The radical request #2 would be an excellent, decisive way to end a sad thread in the Debian bug tracker about Alpine + Maildir: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=405762 .

2 3

[Dovecot] Authentication failed (migrate from 2.0.13 to 2.0.17)
by Dovecot user 03 Jul '12

03 Jul '12

Hi, I use OpenBSD 5.1, roundcube 0.7.2 and dovecot 2.0.17 (684381041dc4+), mysql. I get the following error when i try to connect to imap : roundcube: IMAP Error: Login failed for testing(a)mydomain.net from 192.168.0.92. AUTHENTICATE PLAIN: Authentication failed. in /var/www/webmail/roundcubemail-0.7.2/program/include/rcube_imap.php on line 205 (POST /webmail/?_task=login&_action=login) dovecot: imap-login: Aborted login (auth failed, 1 attempts): user=, method=CRAM-MD5, rip=127.0.0.1, lip=127.0.0.1, TLS Jul 2 15:19:13 mx dovecot: auth-worker: mysql(localhost): Connected to database mail Jul 2 15:19:15 mx dovecot: imap-login: Aborted login (auth failed, 1 attempts): user=, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured Can you help me please ? Here my config files : *dovecot-sql.conf driver = mysql connect = host=localhost dbname=mail user=postfix password=postfix default_pass_scheme = PLAIN password_query = SELECT email as user, password FROM users WHERE email = '%u' user_query = SELECT id as uid, id as gid, home, concat('*:storage=', quota, 'M') AS quota_rule FROM users WHERE email = '%u' *dovecot.conf #i use this on OpenBSD 5.0 and dovecot 2.0.13, works, but it doesn't seem to work with this version :-( # 2.0.13: /etc/dovecot/dovecot.conf # OS: OpenBSD 5.0 i386 ffs auth_mechanisms = plain login digest-md5 cram-md5 apop auth_debug=yes base_dir = /var/dovecot/ first_valid_uid = 1000 mail_location = maildir:/var/mailserv/mail/%d/%n mmap_disable = yes passdb { args = /etc/dovecot-sql.conf driver = sql } plugin { antispam_mail_notspam = --ham antispam_mail_sendmail = /usr/local/bin/sa-learn antispam_mail_sendmail_args = --username=%u antispam_mail_spam = --spam antispam_mail_tmpdir = /tmp antispam_signature = X-Spam-Flag antispam_signature_missing = move antispam_spam = SPAM;Spam;spam;Junk;junk antispam_trash = trash;Trash;Deleted Items; Deleted Messages autocreate = Trash autocreate2 = Spam autocreate3 = Sent autocreate4 = Drafts autosubscribe = Trash autosubscribe2 = Spam autosubscribe3 = Sent autosubscribe4 = Drafts quota = maildir quota_rule = *:storage=5G quota_rule2 = Trash:storage=+100M quota_warning = storage=95%% /usr/local/bin/quota-warning.sh 95 quota_warning2 = storage=80%% /usr/local/bin/quota-warning.sh 80 sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = imap sieve pop3 service auth { unix_listener /var/run/dovecot-auth-master { group = _dovecot mode = 0666 user = _dovecot } unix_listener /var/spool/postfix/private/auth { group = _postfix mode = 0660 user = _postfix } } service imap-login { service_count = 0 #user = _dovecot vsz_limit = 64 M } service pop3-login { service_count = 0 #user = _dovecot vsz_limit = 64 M } ssl_cert =ssl_cipher_list = HIGH:MEDIUM:+TLSv1:!SSLv2:+SSLv3 ssl_key = userdb { args = /etc/dovecot-sql.conf driver = sql } #userdb { # driver = passwd #} protocol imap { imap_client_workarounds = delay-newmail mail_plugins = quota imap_quota autocreate } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xv%08Xu } protocol lda { auth_socket_path = /var/run/dovecot-auth-master mail_plugins = $mail_plugins sieve postmaster_address = postmaster(a)mx.itdebug.net sendmail_path = /usr/sbin/sendmail } default_login_user = _dovenull default_internal_user = _dovecot ## ## ManageSieve specific settings ## # Service definitions service managesieve-login { inet_listener sieve { port = 4190 } inet_listener sieve_deprecated { port = 2000 } } service managesieve { #Max. number of ManageSieve processes (connections) #process_count = 1024 } # Service configuration protocol sieve { } Thank you very much. -- Wesley

2 7

[Dovecot] v2.1.8 released
by Timo Sirainen 03 Jul '12

03 Jul '12

http://dovecot.org/releases/2.1/dovecot-2.1.8.tar.gz http://dovecot.org/releases/2.1/dovecot-2.1.8.tar.gz.sig Most importantly fixes a pretty bad behavior of sending mailbox names as UTF-8 instead of mUTF-7 as required by IMAP RFC. I'm surprised nobody hadn't noticed this in v2.1.x tree before yesterday. I guess some clients might have translated the name to UTF-8 anyway and not noticed it, while others would have silently ignored the problem of not seeing STATUS updates. + pop3c: Added pop3c_master_user setting. - imap: Mailbox names were accidentally sent as UTF-8 instead of mUTF-7 in previous v2.1.x releases for STATUS, MYRIGHTS and GETQUOTAROOT commands. - lmtp proxy: Don't timeout connections too early when mail has a lot of RCPT TOs. - director: Don't crash if the director is working alone. - shared mailboxes: Avoid doing "@domain" userdb lookups. - doveadm: Fixed crash with proxying some commands. - fts-squat: Fixed handling multiple SEARCH parameters. - imapc: Fixed a crash when message had more than 8 keywords. - imapc: Don't crash on APPEND/COPY if server doesn't support UIDPLUS.

1 0

[Dovecot] Additional passdb result status
by Jürgen Pabel 03 Jul '12

03 Jul '12

Dear Dovecot-Team, I am implementing a plugin (for the pop3/imap process) that requires some data to provided from the authentication phase (a derivative of the password). For that, I have now implemented a passdb plugin that generates this data and I would like to "pass" this data down to the mail process (pop3/imap) via extra_fields in the reply of the authentication. The general idea is that my custom passdb plugin calculates the data, sets the extra_field and returns some error (authentication was not successful) so that the "real" passdb backend can be invoked to "really" validate the authentication data. However, in auth_request_handle_passdb_callback() the extra_fields are reseted unless the return code is PASSDB_RESULT_USER_DISABLED. But if that return code is used then any following passdb's aren't invoked any more - which makes sense with respect to user authenticiation. I would therefore like to propose that some IGNORE/CONTINUE-status to be introduced in auth/passdb.h, that would be handled in that extra_fields and possible other values are not reseted in order to allow such propagation of data from authentication process down to the mail process (which could be extracted from the reply string by parsing it). As a further implementation alternative (to the parsing of the reply string), I also propose that some new "environment" item be introduced (in auth_request) in order to allow such data passing in a generic manner. I hope you consider my proposal to be reasonable. If desired, I could implement this myself and provide a patch for merging (based on 2.0.x). If my proposal is generally unfavored, it would be great if any alternative approaches for my situation were suggested. Thanks. Regards, Jürgen PS: please reply to my e-mail (or CC me), as I have not subscribed to the dovecot list

3 3

[Dovecot] userdb errors after upgrading to 2.1
by André Rodier 03 Jul '12

03 Jul '12

Hello everybody, I am running debian wheezy for development and test, and I recently upgrade to dovecot 2.1.7 I am using LDAP lookups, and virtual users with the same UID/GID. Everything was working fine before, but now, I have this error when I try to send an email to a local account: -------------------------------------------------------- Jun 26 15:46:52 lapetus dovecot: lmtp(24518): Error: user user.test(a)indienet.com: Auth USER lookup failed Jun 26 15:46:52 lapetus dovecot: auth: Error: userdb(user.test(a)indienet.com,127.0.0.1): client doesn't have lookup permissions for this user: userdb reply doesn't contain uid (change userdb socket -------------------------------------------------------- However, even if I set the permissions to 0666, I still have the same error. Can you point me in the right direction to fix this, please? Kind regards, André Rodier

2 1

[Dovecot] Wrong headers in dovecot-crlf
by Matthieu RAKOTOJAONA 03 Jul '12

03 Jul '12

Hello everyone, I'm using the very good imaptest [0] tool to test my little imap server implementation. I've tried to use the dovecot-crlf [1] file, but it looks like there are some major issues : $ grep -n "In-Reply-To.*;" tests/data/dovecot-crlf 479:In-Reply-To: <20020806175441.GA7148(a)linux.taugt.net>; from rueckert(a)informatik.uni-rostock.de on Tue, Aug 06, 2002 at 07:54:41PM +0200 525:In-Reply-To: <20020806234054.GA30820(a)carpa.ciagri.usp.br>; from marcelo(a)carpa.ciagri.usp.br on Tue, Aug 06, 2002 at 08:40:54PM -0300 564:In-Reply-To: <20020806234054.GA30820(a)carpa.ciagri.usp.br>; from marcelo(a)carpa.ciagri.usp.br on Tue, Aug 06, 2002 at 08:40:54PM -0300 673:In-Reply-To: <20020807231956.GA11240(a)carpa.ciagri.usp.br>; from marcelo(a)carpa.ciagri.usp.br on Wed, Aug 07, 2002 at 08:19:56PM -0300 795:In-Reply-To: <20020808131329.GA30775(a)carpa.ciagri.usp.br>; from marcelo(a)carpa.ciagri.usp.br on Thu, Aug 08, 2002 at 10:13:30AM -0300 964:In-Reply-To: <20020808193533.GA28619(a)carpa.ciagri.usp.br>; from marcelo(a)carpa.ciagri.usp.br on Thu, Aug 08, 2002 at 04:35:33PM -0300 21545:In-Reply-To: <1046294808.30811.66.camel@hurina>; from tss(a)iki.fi on Wed, Feb 26, 2003 at 11:26:48PM +0200 22042:In-Reply-To: <1046373554.18310.4.camel@hurina>; from tss(a)iki.fi on Thu, Feb 27, 2003 at 09:19:14PM +0200 23712:In-Reply-To: <20030227212127.A10927(a)pcx3332.desy.de>; from Juergen.Kahnert(a)DESY.de on Thu, Feb 27, 2003 at 09:21:27PM +0100 25498:In-Reply-To: <OFF6D684CA.26838A7C-ON42256CE8.003A8EFC-42256CE8.003B49AC(a)icoc.org>; from Leslie_Viljoen(a)icoc.org on Thu, Mar 13, 2003 at 12:44:52PM +0200 30654:In-Reply-To: <1048667343.30187.100.camel@hurina>; from tss(a)iki.fi on Wed, Mar 26, 2003 at 10:29:03AM +0200 31126:In-Reply-To: <1048704303.31565.214.camel@hurina>; from tss(a)iki.fi on Wed, Mar 26, 2003 at 08:45:03PM +0200 31313:In-Reply-To: <1048928723.6856.21.camel@hurina>; from tss(a)iki.fi on Sat, Mar 29, 2003 at 11:05:23AM +0200 31820:In-Reply-To: <1049101161.884.126.camel@hurina>; from tss(a)iki.fi on Mon, Mar 31, 2003 at 11:59:21AM +0300 31890:In-Reply-To: <Pine.LNX.4.44.0303311009510.17234-100000(a)vegemite.nssg.mitel.com>; from charlieb-dovecot(a)e-smith.com on Mon, Mar 31, 2003 at 10:12:22AM -0500 32037:In-Reply-To: <Pine.LNX.4.44.0303311414410.17234-100000(a)vegemite.nssg.mitel.com>; from charlieb-dovecot(a)e-smith.com on Mon, Mar 31, 2003 at 02:19:27PM -0500 32463:In-Reply-To: <1049243642.11879.25.camel@hurina>; from tss(a)iki.fi on Wed, Apr 02, 2003 at 03:34:02AM +0300 As you can see, many of the "In-Reply-To" headers are polluted with some junk. The situation is the same for many "Message-ID" headers. I don't know why they are here, but I think it's a mistake. I thought I would let you know. [0] http://imapwiki.org/ImapTest [1] http://www.dovecot.org/tmp/dovecot-crlf Regards, -- Matthieu RAKOTOJAONA

2 1

[Dovecot] Setting up mixed mbox and maildir
by Jonathan Ryshpan 03 Jul '12

03 Jul '12

I'm trying to set up a dovecot server for which mail arrives in an mbox, and mail is stored in a maildir. The wiki (see http://wiki.dovecot.org/Namespaces) refers to this as "Mixed mbox and Maildir". It advises handling this situation by creating two namespaces: one for the mbox and the other for the maildir. Each of these namespaces starts with namespace private { On the other hand the sample configuration in the documentation puts inbox in a namespace starting with: namespace inbox { # Namespace type: private, shared or public #type = private It appears that there has been a change in the configuration syntax after the wiki was written, and that the word following namespace no longer gives a property of the namespace, but rather its name. Is this correct? In any case, how should the configuration be modified to handle mixed mailboxes? Thanks - jon

4 7

[Dovecot] indexer-worker
by Wojciech Puchar 03 Jul '12

03 Jul '12

why this process (which most probably do squat index/update) runs as root, not - like imap process - as user? 29413 root 1 76 0 22820K 9204K kqread 1 0:17 5.86% indexer-worker

2 3

[Dovecot] Proxy config help please
by Zac Israel 03 Jul '12

03 Jul '12

Hello, I am new to dovecot and I am initially trying to setup a basic imap proxy with password forwarding, I can start the dovecot service, connect and give it my password, and that is where I hang. My config is: root@imap-test:/etc/dovecot# doveconf -n # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-24-generic x86_64 Ubuntu 12.04 LTS auth_debug = yes auth_verbose = yes debug_log_path = syslog first_valid_uid = 100 imap_capability = CAPABILITY IMAP4rev1 ACL BINARY CATENATE CHILDREN CONDSTORE ENABLE ESEARCH ESORT I18NLEVEL=1 ID IDLE LIST-EXTENDED LIST-STATUS LITERAL+ LOGIN-REFERRALS MULTIAPPEND NAMESPACE QRESYNC QUOTA RIGHTS=ektx SASL-IR SEARCHRES SORT THREAD=ORDEREDSUBJECT UIDPLUS UNSELECT WITHIN XLIST last_valid_uid = 200 mail_debug = yes mail_gid = 107 mail_uid = 107 passdb { args = proxy=proxy_always nopassword=y host=172.16.0.13 port=143 proxy_timeout=5 starttls=y ssl=any-cert driver = static } protocols = imap service imap-login { inet_listener imap { address = * port = 143 } } ssl = required ssl_cert = </etc/courier/imapd.pem ssl_key = </etc/courier/imapd.pem verbose_ssl = yes The system at 172.16.0.13 is a zimbra proxy. I can see in the logs that it initially complains about my ssl cert, and if I remove ssl=any-cert it fails because my cert is self signed, so I know it is talking to the proxy and doing starttls which is a requirement of zimbra. Unfortunately I have not found a way to see the full exchange between dovecot and my zimbra proxy other than tcp dump, which just shows a small packet exchange. Please let me know if I can provide any other information and thanks in advance for any help. -Zac

3 3

[Dovecot] Dovecot 2.1 stable packages for Debian?
by Krzysztof Trybowski 02 Jul '12

02 Jul '12

Hello all, it is strange, but Dovecot 2.x still didn't make it into Debian (not even backports). It exists in testing, but that's still a long wait. OTOH there are official packages built every day (referenced from the download page). This puzzles me: why isn't there a build created from each stable, released version of Dovecot, so that users of Debian Stable could benefit from the new version, and run it on production environment? Could you (I mean — the Dovecot team) provide such packages? This wouldn't require any major amount of work, since you already have daily builds produced. You would just have to run that building system once per each released version and keep it available for download. The reason for this is relatively simple: I'm about to implement a new mail server, and I'd like to keep to Debian Stable while using Dovecot 2.x. This will make future updates much easier, as I won't have to face 1.2 -> 2.0 migration on a production system. Regards, KT

9 9

[Dovecot] RAID1+md concat+XFS as mailstorage
by Костырев Александр Алексеевич 02 Jul '12

02 Jul '12

Hello! somewhere in maillist I've seen RAID1+md concat+XFS being promoted as mailstorage. Does anybody in here actually use this setup? I've decided to give it a try, but ended up with not being able to recover any data off survived pairs from linear array when _the_first of raid1 pairs got down. thanks!

7 22

[Dovecot] [PATCH] GSSAPI authorization and virtual users
by Sam Morris 02 Jul '12

02 Jul '12

The attached patch makes it possible for Kerberos principals to be associated with a password database entry by adding a new "k5principals" passdb setting. A client that successfully authenticates using GSSAPI will be able to log in as any user who has been associated with the client's Kerberos principal. This means that users can now use their Kerberos identities to access virtual mail accounts. The patch definitely needs review by someone familiar with Dovecot. It works for me on a small test installation using the passwd-file backend. Things that should probably be improved: 1. The list of authorized principals is stored in struct auth_request. I would prefer to store it in struct gssapi_auth_request, but auth-request.c does not know about structs that are specific to the different authentication plugins. This could be fixed in a more general way by adding a new function to struct mech_module to allow authplugins to read fields during passdb lookups. 2. The gssapi authplugin now does a credential lookup in order to trigger parsing of the k5principals setting. In order for this to work, auth_request_set_username is now called before mech_gssapi_userok. AFAICT the only impact of this is that messages logged by this function (and the functions it calls) will now use the name of the virtual account. 3. The credentials lookup triggers an info log message saying that credentials for GSSAPI were requested, "but we have only (e.g.) MD5-CRYPT". The authplugin doesn't actually want the credential, but I think that the only way the authplugin can trigger a passdb lookup is by requesting it. 4. The final part of the code in mech_gssapi_unwrap was moved to the callback that's triggered when the credentials lookup is complete. The code still needs access to the GSSAPI data, so the buffer pointer & length are now stored in struct gssapi_auth_request, making the inbuf parameter to the mech_gssapi_{sec_context,wrap,unwrap} functions superfluous. The parameters should be removed. 5. The k5principals list won't be processed on Solaris. The code added to the end of mech_gssapi_krb5_userok would have to be moved to a separate function and then be called from the Solaris code. 6. GCC tells me about assignment to incompatible pointer types in the code that iterates through gssapi_k5principals. I must be missing something. The patch is licensed under the MIT license. Please let me know what you think. -- Sam Morris <sam(a)robots.org.uk>

2 4

[Dovecot] UTF-8 mailbox name STATUS response
by Ewald Dieterich 02 Jul '12

02 Jul '12

STATUS in Dovecot 2.1.7 returns the UTF-8 decoded folder name in a string literal: . CREATE "INBOX.Euro &IKw-" . OK Create completed. . LIST "" "INBOX.Euro &IKw-" * LIST (\HasNoChildren) "." "INBOX.Euro &IKw-" . STATUS "INBOX.Euro &IKw-" (MESSAGES) * STATUS {14} INBOX.Euro € (MESSAGES 0) . OK Status completed. Is this intended? My Perl script based on Mail::IMAPTalk doesn't like it and I wonder if there are other clients that don't cope with it.

2 3

[Dovecot] lmtp proxy timeout while waiting for reply to DATA reply
by Daniel Parthey 02 Jul '12

02 Jul '12

Hi, we are experiencing similar sporadic data timeout issues with dovecot 2.0.20 as in http://dovecot.org/pipermail/dovecot/2011-June/059807.html at least once a week. Some mails get temporarily deferred in the postfix queue since dovecot director lmtp refuses them and the mails are delivered at a later time. The problem applies to mails delivered to single users as well as distribution lists where the mails gets delivered to several mailboxes by postfix. The postfix log shows the following output: postfix.log.7.gz:Apr 21 18:48:46 10.129.3.233 postfix/lmtp[15868]: 88062C08E: to=<username(a)example.org>, orig_to=<username(a)example.org>, relay=127.0.0.1[127.0.0.1]:20024, delay=35, delays=5.4/0.01/0/30, dsn=4.4.0, status=deferred (host 127.0.0.1[127.0.0.1] said: 451 4.4.0 Remote server not answering (timeout while waiting for reply to DATA reply) (in reply to end of DATA command)) The dovecot.log (mailbox and director log there via syslog) shows the following output: Apr 21 18:46:53 10.129.3.233 dovecot: lmtp(15869): Debug: none: root=, index=, control=, inbox=, alt= Apr 21 18:46:53 10.129.3.233 dovecot: lmtp(15869): Connect from 127.0.0.1 Apr 21 18:46:53 10.129.3.233 dovecot: lmtp(15869): Debug: auth input: user=username(a)example.org proxy port=19024 host=10.129.3.190 proxy_refresh=450 Apr 21 18:46:53 10.129.3.233 dovecot: lmtp(15869): Disconnect from 127.0.0.1: Client quit (in reset) Apr 21 18:47:29 10.129.3.233 dovecot: lmtp(15869): Debug: none: root=, index=, control=, inbox=, alt= Apr 21 18:47:29 10.129.3.233 dovecot: lmtp(15869): Connect from 127.0.0.1 Apr 21 18:47:29 10.129.3.233 dovecot: lmtp(15869): Debug: auth input: user=username(a)example.org proxy port=19024 host=10.129.3.190 proxy_refresh=450 Apr 21 18:47:29 10.129.3.233 dovecot: lmtp(15869): Disconnect from 127.0.0.1: Client quit (in reset) Apr 21 18:48:15 10.129.3.233 dovecot: lmtp(15869): Debug: none: root=, index=, control=, inbox=, alt= Apr 21 18:48:15 10.129.3.233 dovecot: lmtp(15869): Connect from 127.0.0.1 Apr 21 18:48:15 10.129.3.233 dovecot: lmtp(15869): Debug: auth input: user=username(a)example.org proxy port=19024 host=10.129.3.190 proxy_refresh=450 Apr 21 18:48:46 10.129.3.233 dovecot: lmtp(15869): Disconnect from 127.0.0.1: Client quit (in reset) One cannot identify the lmtp log origin from the log_format prefixes, but it seems that the "lmtp($PID)" log originated from the director, since proxy port 19024 is mentioned in the logs, which is our dovecot mailbox backend. Config for dovecot (mailbox) and director (proxy) is attached. mail_debug is yes for both dovecot and director. How can we find out more information? Shall I apply the following patches from http://dovecot.org/pipermail/dovecot/2011-June/059987.html or are they already included with version 2.0.20? Regards, Daniel

3 10

[Dovecot] director directing to wrong server (sometimes)
by Angel L. Mateo 02 Jul '12

02 Jul '12

Hello, I have discovered a strange behaviour with director proxying... I have a user, its assigned server is 155.54.211.164. The problem is that I don't know why director sent him yesterday to a different server, because my server was up all the time. Moreover, I'm using poolmon in director servers to check availability of final servers and it didn't report any problem with the server. I have two load balanced director servers. Logs at these servers are: * logs directing him to the correct backend server Jun 28 08:38:18 myotis42 dovecot: auth: Debug: master in: PASS#0111#011<user>@um.es#011service=lmtp#011lip=155.54.211.185#011lport=24#011rip=155.54.212.168#011rport=52255 Jun 28 08:38:18 myotis42 dovecot: auth: Debug: static(<user>,155.54.212.168): lookup Jun 28 08:38:18 myotis42 dovecot: auth: Debug: master out: PASS#0111#011user=<user>#011proxy#011proxy_timeout=150 Jun 28 08:38:18 myotis42 dovecot: lmtp(15889): Debug: auth input: user=<user> proxy proxy_timeout=150 host=155.54.211.164 proxy_refresh=450 Jun 28 08:39:59 myotis42 dovecot: auth: Debug: master in: PASS#01118#011<user>@um.es#011service=lmtp#011lip=155.54.211.185#011lport=24#011rip=155.54.212.166#011rport=40008 Jun 28 08:39:59 myotis42 dovecot: auth: Debug: static(<user>,155.54.212.166): lookup Jun 28 08:39:59 myotis42 dovecot: auth: Debug: master out: PASS#01118#011user=<user>#011proxy#011proxy_timeout=150 Jun 28 08:39:59 myotis42 dovecot: lmtp(15361): Debug: auth input: user=<user> proxy proxy_timeout=150 host=155.54.211.164 proxy_refresh=450 * now, the other director server sends him to an incorrect backend server Jun 28 09:01:12 myotis41 dovecot: auth: Debug: static(<user>,155.54.66.38): lookup Jun 28 09:01:12 myotis41 dovecot: auth: Debug: static(<user>,155.54.66.38): Allowing any password Jun 28 09:01:12 myotis41 dovecot: auth: Debug: client out: OK#01134556#011user=<user>#011proxy#011proxy_timeout=150#011pass=<hidden> Jun 28 09:01:12 myotis41 dovecot: auth: Debug: static(<user>,155.54.66.38): lookup Jun 28 09:01:12 myotis41 dovecot: auth: Debug: static(<user>,155.54.66.38): Allowing any password Jun 28 09:01:12 myotis41 dovecot: auth: Debug: client out: OK#01152763#011user=<user>#011proxy#011proxy_timeout=150#011pass=<hidden> Jun 28 09:01:12 myotis41 dovecot: imap-login: proxy(<user>): started proxying to 155.54.211.162:143: user=<<user>>, method=PLAIN, rip=155.54.66.38, lip=155.54.211.186 Jun 28 09:01:12 myotis41 dovecot: imap-login: proxy(<user>): started proxying to 155.54.211.162:143: user=<<user>>, method=PLAIN, rip=155.54.66.38, lip=155.54.211.186 Jun 28 09:01:13 myotis41 dovecot: auth: Debug: static(<user>,155.54.66.38): lookup Jun 28 09:01:13 myotis41 dovecot: auth: Debug: static(<user>,155.54.66.38): Allowing any password * Now, the first director sends him to the incorrect one too Jun 28 09:33:50 myotis42 dovecot: auth: Debug: master in: PASS#01132#011<user>@um.es#011service=lmtp#011lip=155.54.211.185#011lport=24#011rip=155.54.212.168#011rport=46830 Jun 28 09:33:50 myotis42 dovecot: auth: Debug: static(<user>,155.54.212.168): lookup Jun 28 09:33:50 myotis42 dovecot: auth: Debug: master out: PASS#01132#011user=<user>#011proxy#011proxy_timeout=150 Jun 28 09:33:50 myotis42 dovecot: lmtp(17284): Debug: auth input: user=<user> proxy proxy_timeout=150 host=155.54.211.162 proxy_refresh=450 I haven't found any error log for the correct backend server between the correct redirection and the incorrect one. In fact, I have lot of logs of other users directed to it, and logs of the same director directing connections to the correct server. -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información _o) y las Comunicaciones Aplicadas (ATICA) / \\ http://www.um.es/atica _(___V Tfo: 868887590 Fax: 868888337

3 3

[Dovecot] Config off by a nuance or a gross?
by Michael Brian Bentley 01 Jul '12

01 Jul '12

Hi, I am trying to establish an IMAP mail service accessible using a current Thunderbird on a laptop. I used Macports to install Dovecot2 (2.1.5) on an older Snow Leopard Mac mini with Intel Core Duo (specifically a Macmini1,1). My goal is to be able to run sieve under dovecot2 and offload the email triage from my work laptop to the little mail server. Mail appears to show up on the server just fine. I'm having trouble getting Tbird to log in and access properly. Because there are so many components in play (Tbird, pam, Dovecot2, macports, OS X Snow Leopard 10.6.8) (dovecot by itself seems to have quite a few settings), it is hard to tell what bit is out of whack. The message I get from Tbird 13.0.1 for OS X (on Lion) is: Alert: The IMAP server bentley on TheMini does not support the selected authentication method. Please change the 'Authentication method' in the 'Account Settings | Server settings'. When I set up the account, Tbird's automatic configuration invents a fake mail service based on my domain name, but appears to configure things sensibly once I switch to the manual configuration and fill in the relevant IP information. It does not appear to care whether it has a password or not. When I set up the account manually on TBird, I let it set up as: IMAP (ipv4)xx.xxx.xx.xx Port: 143 Connection security: None Authentication method: Password, transmitted insecurely SMTP xxxxxxxx.com Port: 587 The dovecot.conf tree includes these: passdb { driver = pam } userdb { driver = passwd } default_login_user = _dovenull default_internal_user = _dovecot service imap-login { executable = /opt/local/libexec/dovecot/imap-login inet_listener imap { address = * port = 143 } } service imap { executable=/opt/local/libexec/dovecot/imap process_limit = 1024 } service lmtp { unix_listener lmtp { } } Issuing the command: dovecot --build-options produces: Build options: ioloop=kqueue notify=kqueue ipv6 openssl io_block_size=8192 Mail storages: shared mdbox sdbox maildir mbox cydir imapc pop3c raw SQL drivers: Passdb: checkpassword pam passwd passwd-file Userdb: checkpassword passwd prefetch passwd-file The /etc/pam.d/dovecot file contains: # pop3, imap, smtp : auth account password session auth required pam_opendirectory.so account required pam_permit.so password required pam_deny.so session required pam_permit.so Dovecot provides the following debug messages on the console when I add args = failure_show_msg=yes to passdb in the relevant dovecot conf file: Jul 1 11:12:38 xx-xxx-xx-xx-nerewhon dovecot[3871]: auth: Debug:auth client connected (pid=5047) Jul 1 11:12:40 xx-xxx-xx-xx-nerewhon dovecot[3871]: imap-login: Disconnected (no auth attempts in 2 secs): user=<>, rip=192.168.xx.xx, lip=xx.xxx.xx.xx I recently discovered doveadm and used it with: doveadm config to create what I think is the current dovecot.conf file. I hesitate to inflict that on the list without being told, "yeah, we need that," there may be digest subscribers out there... I also see these messages show up; they appear unrelated to what I do with Tbird: Jul 1 11:37:33 xx-xxx-xx-xx-nerewhon dovecot[3871]: auth: Debug: Loading modules from directory: /opt/local/lib/dovecot/auth auth: Debug: auth client connected (pid=5094) auth: Debug: client in: AUTH 1 PLAIN service=imap secured lip=127.0.0.1 rip=127.0.0.1 lport=143 rport=49774 auth: Debug: client out: CONT 1 auth: Debug: client in: CONT 1 AGJlbnRsZXkAZ3IxbmNo auth-worker(5100): Debug: Loading modules from directory: /opt/local/lib/dovecot/auth auth-worker(5100): Debug: pam(bentley,127.0.0.1): lookup service=dovecot auth-worker(5100): Debug: pam(bentley,127.0.0.1): #1/1 style=1 msg=Password: auth-worker(5100): pam(bentley,127.0.0.1): pam_authenticate() failed: authentication error (password mismatch?) (given password: whatever) auth: Debug: client out: FAIL 1 user=bentley reason=Password: auth: Debug: client in: AUTH 2 PLAIN service=imap secured lip=127.0.0.1 rip=127.0.0.1 lport=143 rport=49774 resp=AGJlbnRsZXkAZ3IxbmNo auth-worker(5100): Debug: pam(bentley,127.0.0.1): lookup service=dovecot auth-worker(5100): Debug: pam(bentley,127.0.0.1): #1/1 style=1 msg=Password: auth-worker(5100): pam(bentley,127.0.0.1): pam_authenticate() failed: authentication error (password mismatch?) (given password: whatever) auth: Debug: client out: FAIL 2 user=bentley reason=Password: imap-login: Disconnected (auth failed, 2 attempts in 9 secs): user=<bentley>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, secured auth: Debug: Loading modules from directory: /opt/local/lib/dovecot/auth

1 0

[Dovecot] ot: trying to understand log entries, etc
by Voytek Eymont 01 Jul '12

01 Jul '12

totally of, I'm trying to understand what's happening, aka, 'how does email works' ? I have Dovecot 1.x, all works fine I noticed in the logs failed access from no-longer-hosted account/user, physical account deleted/removed, most likely from user's BBerry, every ~15 minutes: from /var/log/maillog --- Jun 24 07:31:25 dovecot: imap-login: Disconnected: Inactivity (auth failed, 1 attempts): user=<vvv@tld>, method=PLAIN, rip=101.222.222.222, lip=111.111.111.111 --- I recreated account/physical path /var/mail/.../tld/vvv@tld I logged in with webmail, all works, webmail logged out I physically copied some emails (from another account) to physical path ../../tld/vvv@tld/new after a while, I see the email files NO LONGER in ../../../new BUT now in ../../tld/vvv@tld/cur Q: that means the email was accessed, doesn't it ? BUT, I don't see any more access in the /var/log/maillog, not failed, not OK I did see one, after I recreated account Jun 30 20:01:53 dovecot: IMAP(vvv@tld): Disconnected: Logged out bytes=32/666 NONE since, but email files move from new to cur ?? if I observe email files moving from 'new' to 'cur' shouldn't I see some action logged in /var/log/maillog to correspond ? perplexed.... -- Voytek

1 0

[Dovecot] moving from BSD to Ubuntu
by spamvoll＠googlemail.com 30 Jun '12

30 Jun '12

hi.. im planning to move my Mailserver from an FreeBSD Box to an Ubuntu 12.04 LTS Box. Both Boxes run Dovecot 2.0 Does anyone did this before and experienced any problems ? Downtime is no problem, my plan is to stop Dovecot on the Bsd Box and copy all Mailbox files to the Uuntu system and start dovecot. Regards Hans

2 1

Re: [Dovecot] started with dovecot sieve
by Daniel Parthey 30 Jun '12

30 Jun '12

Rolf wrote: > Am 2012-06-25 23:59, schrieb Daniel Parthey: > >Hi Rolf, > > > >Rolf wrote: > >>Jun 25 20:22:54 rolf14 dovecot: lda(rolf): Error: setegid(privileged) failed: Operation not permitted Doesn't lda(rolf) mean it is being executed under user "rolf", not root or dovecot? How exactly do you invoke lda from your /etc/postfix/master.cf? You might also try to use LMTP via TCP to deliver mails from postfix to dovecot to work around any permission problems. > I have installed dovecot and docecot-sieve by Debians aptitude You don't seem to be the only one with these problems, see Debian BTS: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=626130 > As far as I understand the "ps -f ax" output (see > below) dovecot runs with root privileges and postfix runs with its > own user privileges. > > root 20998 1 0 Jun25 ? Ss 0:03 /usr/sbin/dovecot -c /etc/dovecot/dovecot.conf Well, the master process often runs as root, but child processes like lda may be configured to run as an unprivileged, or even as the user which owns the mailbox. > The mbox files below /var/mail are owned by > their respective users and have "mail" as their group, both can > write, world can do nothing. I added every related system user to > the mail group, also restarted postfix and dovecot. > root@rolf14:/var/mail# more /etc/group | grep mail: mail:x:8:amavis,dovecot,clamav,postfix User "rolf" is not a member of group "mail", but I don't think he needs to be, otherwise he would be able to read the mails of all users on the system and this would be a security risk. > As I understand it, postfix activates the lda "deliver" as user > "postfix". Therefore it should be able to write to the mboxes at > /var/mail. If needed dovecot can write there as well. The lda should rather switch to the owner of the respective INBOX, e.g. /var/mail/rolf. Log message "lda(rolf)" looks like this happens. To summarize, I think LMTP will be the easiest way to fix the permission problems. Otherwise you would need to fiddle out how to prevent dovecot lda from switching to group additional group "mail", since unprivileged user "rolf" is not allowed to do that. Regards, Daniel -- https://plus.google.com/103021802792276734820

2 4

[Dovecot] how to announce shared folders to clients using non-default mail prefix
by Tom Lieuallen 30 Jun '12

30 Jun '12

We're using dovecot 2.1.3 and I've been doing some testing with 2.1.7. We have shared mail (maildir) folders working along with our default mbox mailboxes. Our problem is trying to get this to work in a reasonable fashion with our iPhone or iPad mail.app clients. It's well known that they don't honor the subscription list; they show all available mail folders and do not collapse trees of folders. I have 381 folders in directories under mail. Normal clients are fine, but this is unmanageable in IOS. What we have been doing is changing the mail prefix for the iPhone to a subfolder, then using soft links to point to the most commonly used folders we use. This works, but when one changes the mail prefix, any shared folders are not presented. I'm suspicious that this is a design decision. If there is some way to make it work, I'd be very grateful. Note the two 'sharedimap' folders listed in the first 'list'. Note that if I change the prefix for that shared namespace to 'iphonemail/', it does present my shared folders as well as anything in a personal iphonemail directory. However, 'select' didn't work with the personal folders. My guess is it's mostly due to the difference in mail formats between the two (mbox & maildir). But, it does show that somewhere in the code it's checking the mail prefix against namespaces and not displaying shared folders in non-default prefixes. I wish this were a configurable option. thank you Tom Lieuallen Oregon State University . list "" * * LIST (\Noselect \HasChildren) "/" "foo1" * LIST (\NoInferiors \UnMarked) "/" "foo1/folder1" * LIST (\Noselect \HasChildren) "/" "iphonemail" * LIST (\NoInferiors \Marked) "/" "iphonemail/foo1" * LIST (\NoInferiors \UnMarked) "/" "Sent" * LIST (\NoInferiors \UnMarked) "/" "Trash" * LIST (\HasNoChildren) "/" "INBOX" * LIST (\HasNoChildren) "/" "sharedimap/cesupport" * LIST (\HasNoChildren) "/" "sharedimap/mimesupport" . OK List completed. . list "iphonemail/" * * LIST (\NoInferiors \Marked) "/" "iphonemail/foo1" . OK List completed. =============== # 2.1.7: /private/dovecot/etc/dovecot/dovecot.conf # OS: SunOS 5.10 sun4v auth_debug = yes auth_verbose = yes default_client_limit = 10245 default_process_limit = 5120 first_valid_uid = 100 mail_location = mbox:~/mail:INBOX=/var/mail/%u:INDEX=/a2/imap-index/%u mail_nfs_storage = yes mail_plugins = quota acl namespace { inbox = yes location = prefix = separator = / type = private } namespace { hidden = yes inbox = no list = children location = maildir:/a1/dove-shared:INDEX=/a2/imap-index/dove-shared/%u prefix = sharedimap/ separator = / type = shared } passdb { driver = pam } passdb { args = scheme=CRYPT username_format=%u /private/dovecot/etc/passwd driver = passwd-file } plugin { acl = vfile quota = fs:INBOX:mount=/a1 quota2 = fs:Home quota:mount=%h } protocols = imap lmtp service imap-login { inet_listener imaps { port = 993 ssl = yes } process_min_avail = 16 service_count = 1 } service imap { process_limit = 2048 } ssl_ca = </private/ssl/certs/SSL_CA_Bundle.pem ssl_cert = </private/ssl/certs/mail.crt ssl_key = </private/ssl/certs/mail.key userdb { driver = passwd } userdb { args = username_format=%u /private/dovecot/etc/passwd driver = passwd-file } protocol imap { mail_plugins = quota acl imap_quota imap_acl } protocol pop3 { pop3_uidl_format = %08Xv%08Xu }

2 6

[Dovecot] Adding IMAP SORT and THREAD Extensions but THREAD=ORDEREDSUBJECT functionality to Dovecot 2.x.y !
by Oooo1 30 Jun '12

30 Jun '12

Hi. Can somebody add IMAP SORT and THREAD Extensions THREAD=ORDEREDSUBJECT function to the just next version of Dovecot ? It is necessary to GroupWare server. At the moment I have made it workable together, but there is one unstable point, as I have understood SOGo needs THREAD=ORDEREDSUBJECT sorting functions and if it not to get it, GroupWare server makes unworkable some of its component. If it needs additional info, you are welcome.

1 0

[Dovecot] What does "namespace inbox {..." mean
by Jonathan Ryshpan 30 Jun '12

30 Jun '12

I'm trying to set up a dovecot server for which mail arrives in an mbox, and mail is stored in a maildir. The wiki (see http://wiki.dovecot.org/Namespaces) refers to this as "Mixed mbox and Maildir". It advises handling this situation by creating two namespaces: one for the mbox and the other for the maildir. On the other hand the sample configuration coming with dovecot in my distro puts inbox in a namespace starting with: namespace inbox { # Namespace type: private, shared or public #type = private It appears from the wiki that the word following the namespace declarator (if this is the right word) should be either "public", "shared", or "private", and describes a property of the namespace being declared. So what does: namespace inbox {... mean? Similarly in another part of the wiki (see http://wiki2.dovecot.org/Plugins/Virtual) I read that it's possible to have namespace virtual { namespace real { ... which only increases my perplexity. Please advise! Thanks - jon

2 1