- dovecot - dovecot.org

[Dovecot] public/private email accounts
by Ashvin Meetoo 24 Aug '05

24 Aug '05

Hi, I am running FC4 with postfix/dovecot/amavisd-new etc on my box with 50 staff email accounts (say 10 per 5 departments)... everything is working ok... I want to create 5 more accounts for each department (to be redirected to respective staffs, e.g. sales(a)xyz.com) as well one for everyone... that can be easily done by creating an account and modifying the .forward file in the /home/<user> folder. My great concern is that if by a virus attachment or spam is not detected and sent to everyone(a)xyz.com, it will be replicated to 50 email addresses... what I want is to have the 6 accounts mentionned above to be used only by the personnel and not the outside world... is there a way of doing this? Thank you. __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com

2 1

[Dovecot] Well, "Hard filesystem quota can also be problematic"
by Jeroen Scheerder 24 Aug '05

24 Aug '05

"Hard filesystem quota can also be problematic", quoth <http://www.dovecot.org/>. Since we actually use quota for our userbasg, this merited further investigation. Using 1.0-stable, we enabled quota on /var and /users filesystems, and set very low quota for a test account. Then we had some mail delivered on it, and we moved some messages about. At some point, Thunderbird started to croak about "The current command did not succeed. The mail server responded: Internal error occured. Refer to server log for more information. [<timestamp>].", "The current command did not succeed. The mail server responded: .", "The current command did not succeed. The mail server responded: Out of disk space." This I can live with. Hoever, at some point in our experiments we also found that a mailbox (mbox format) that did contain a few dozen messages suddenly was truncated to 0 bytes. Not so hot. Can anyone tell me whether or not there is, or will be, some way of using dovecot on a system with quota without risk of data loss when quota limits are reached? How do people cope with this? Regards, Jeroen. p.s. That first error message gave rise to the enclosed patch. diff -r -c1 dovecot-1.0-stable-patched/doc/auth-protocol.txt dovecot-1.0-stable/doc/auth-protocol.txt *** dovecot-1.0-stable-patched/doc/auth-protocol.txt Wed Jul 27 08:08:35 2005 --- dovecot-1.0-stable/doc/auth-protocol.txt Mon Jan 31 17:37:54 2005 *************** *** 171,173 **** ! FAIL reply means an internal error occurred. Usually either a configuration mistake or temporary error caused by lost resource (eg. database down). --- 171,173 ---- ! FAIL reply means an internal error occured. Usually either a configuration mistake or temporary error caused by lost resource (eg. database down). diff -r -c1 dovecot-1.0-stable-patched/doc/index.txt dovecot-1.0-stable/doc/index.txt *** dovecot-1.0-stable-patched/doc/index.txt Wed Jul 27 08:08:39 2005 --- dovecot-1.0-stable/doc/index.txt Mon Jan 31 17:37:54 2005 *************** *** 89,91 **** processes has to scan the mailbox, other processes simply check from the ! log file what changes occurred. --- 89,91 ---- processes has to scan the mailbox, other processes simply check from the ! log file what changes occured. diff -r -c1 dovecot-1.0-stable-patched/src/imap/client.h dovecot-1.0-stable/src/imap/client.h *** dovecot-1.0-stable-patched/src/imap/client.h Wed Jul 27 08:08:26 2005 --- dovecot-1.0-stable/src/imap/client.h Mon Jan 31 17:37:54 2005 *************** *** 68,70 **** /* Read a number of arguments. Returns TRUE if everything was read or ! FALSE if either needs more data or error occurred. */ int client_read_args(struct client *client, unsigned int count, --- 68,70 ---- /* Read a number of arguments. Returns TRUE if everything was read or ! FALSE if either needs more data or error occured. */ int client_read_args(struct client *client, unsigned int count, diff -r -c1 dovecot-1.0-stable-patched/src/imap/cmd-idle.c dovecot-1.0-stable/src/imap/cmd-idle.c *** dovecot-1.0-stable-patched/src/imap/cmd-idle.c Wed Jul 27 08:08:30 2005 --- dovecot-1.0-stable/src/imap/cmd-idle.c Mon Jan 31 17:37:54 2005 *************** *** 159,161 **** } else if (ctx->sync_pending) { ! /* more changes occurred while we were sending changes to client */ --- 159,161 ---- } else if (ctx->sync_pending) { ! /* more changes occured while we were sending changes to client */ diff -r -c1 dovecot-1.0-stable-patched/src/lib/file-cache.h dovecot-1.0-stable/src/lib/file-cache.h *** dovecot-1.0-stable-patched/src/lib/file-cache.h Wed Jul 27 08:06:28 2005 --- dovecot-1.0-stable/src/lib/file-cache.h Mon Jan 31 17:37:55 2005 *************** *** 12,14 **** /* Read data from file, returns how many bytes was actually read or -1 if ! error occurred. */ ssize_t file_cache_read(struct file_cache *cache, uoff_t offset, size_t size); --- 12,14 ---- /* Read data from file, returns how many bytes was actually read or -1 if ! error occured. */ ssize_t file_cache_read(struct file_cache *cache, uoff_t offset, size_t size); diff -r -c1 dovecot-1.0-stable-patched/src/lib/istream.h dovecot-1.0-stable/src/lib/istream.h *** dovecot-1.0-stable-patched/src/lib/istream.h Wed Jul 27 08:06:32 2005 --- dovecot-1.0-stable/src/lib/istream.h Mon Jan 31 17:37:54 2005 *************** *** 60,62 **** /* Like i_stream_next_line(), but reads for more data if needed. Returns NULL ! if more data is needed or error occurred. */ char *i_stream_read_next_line(struct istream *stream); --- 60,62 ---- /* Like i_stream_next_line(), but reads for more data if needed. Returns NULL ! if more data is needed or error occured. */ char *i_stream_read_next_line(struct istream *stream); diff -r -c1 dovecot-1.0-stable-patched/src/lib/read-full.h dovecot-1.0-stable/src/lib/read-full.h *** dovecot-1.0-stable-patched/src/lib/read-full.h Wed Jul 27 08:06:38 2005 --- dovecot-1.0-stable/src/lib/read-full.h Mon Jan 31 17:37:54 2005 *************** *** 3,5 **** ! /* Read data from file. Returns -1 if error occurred, or 0 if EOF came before everything was read, or 1 if all was ok. */ --- 3,5 ---- ! /* Read data from file. Returns -1 if error occured, or 0 if EOF came before everything was read, or 1 if all was ok. */ diff -r -c1 dovecot-1.0-stable-patched/src/lib/strfuncs.c dovecot-1.0-stable/src/lib/strfuncs.c *** dovecot-1.0-stable-patched/src/lib/strfuncs.c Wed Jul 27 08:06:47 2005 --- dovecot-1.0-stable/src/lib/strfuncs.c Mon May 16 23:15:10 2005 *************** *** 100,102 **** if (len < 0) { ! /* some error occurred */ len = 0; --- 100,102 ---- if (len < 0) { ! /* some error occured */ len = 0; diff -r -c1 dovecot-1.0-stable-patched/src/lib/write-full.h dovecot-1.0-stable/src/lib/write-full.h *** dovecot-1.0-stable-patched/src/lib/write-full.h Wed Jul 27 08:06:43 2005 --- dovecot-1.0-stable/src/lib/write-full.h Mon Jan 31 17:37:55 2005 *************** *** 3,5 **** ! /* Write data into file. Returns -1 if error occurred, or 0 if all was ok. If there's not enough space in device, -1 with ENOSPC is returned, and --- 3,5 ---- ! /* Write data into file. Returns -1 if error occured, or 0 if all was ok. If there's not enough space in device, -1 with ENOSPC is returned, and diff -r -c1 dovecot-1.0-stable-patched/src/lib-imap/imap-parser.h dovecot-1.0-stable/src/lib-imap/imap-parser.h *** dovecot-1.0-stable-patched/src/lib-imap/imap-parser.h Wed Jul 27 08:07:00 2005 --- dovecot-1.0-stable/src/lib-imap/imap-parser.h Mon Jan 31 17:37:55 2005 *************** *** 88,90 **** need to do that. Returns number of arguments read (may be less than count ! in case of EOL), -2 if more data is needed or -1 if error occurred. --- 88,90 ---- need to do that. Returns number of arguments read (may be less than count ! in case of EOL), -2 if more data is needed or -1 if error occured. diff -r -c1 dovecot-1.0-stable-patched/src/lib-mail/message-parser.h dovecot-1.0-stable/src/lib-mail/message-parser.h *** dovecot-1.0-stable-patched/src/lib-mail/message-parser.h Wed Jul 27 08:06:56 2005 --- dovecot-1.0-stable/src/lib-mail/message-parser.h Mon Jan 31 17:37:55 2005 *************** *** 112,114 **** input stream is non-blocking and more data needs to be read, -1 when all is ! done or error occurred (see stream's error status). */ int message_parse_header_next(struct message_header_parser_ctx *ctx, --- 112,114 ---- input stream is non-blocking and more data needs to be read, -1 when all is ! done or error occured (see stream's error status). */ int message_parse_header_next(struct message_header_parser_ctx *ctx, diff -r -c1 dovecot-1.0-stable-patched/src/lib-sql/sql-api.h dovecot-1.0-stable/src/lib-sql/sql-api.h *** dovecot-1.0-stable-patched/src/lib-sql/sql-api.h Wed Jul 27 08:06:51 2005 --- dovecot-1.0-stable/src/lib-sql/sql-api.h Mon Jan 31 17:37:55 2005 *************** *** 23,25 **** /* Go to next row, returns 1 if ok, 0 if this was the last row or -1 if error ! occurred. This needs to be the first call for result. */ int sql_result_next_row(struct sql_result *result); --- 23,25 ---- /* Go to next row, returns 1 if ok, 0 if this was the last row or -1 if error ! occured. This needs to be the first call for result. */ int sql_result_next_row(struct sql_result *result); diff -r -c1 dovecot-1.0-stable-patched/src/lib-storage/index/maildir/maildir-sync.c dovecot-1.0-stable/src/lib-storage/index/maildir/maildir-sync.c *** dovecot-1.0-stable-patched/src/lib-storage/index/maildir/maildir-sync.c Wed Jul 27 08:08:03 2005 --- dovecot-1.0-stable/src/lib-storage/index/maildir/maildir-sync.c Mon Jan 31 17:37:55 2005 *************** *** 7,9 **** We want to be as efficient as we can. The most efficient way to ! check if changes have occurred is to stat() the new/ and cur/ directories and uidlist file - if their mtimes haven't changed, --- 7,9 ---- We want to be as efficient as we can. The most efficient way to ! check if changes have occured is to stat() the new/ and cur/ directories and uidlist file - if their mtimes haven't changed, *************** *** 14,16 **** then make a modification. Such modifications wouldn't get noticed ! until a new modification occurred later. --- 14,16 ---- then make a modification. Such modifications wouldn't get noticed ! until a new modification occured later. diff -r -c1 dovecot-1.0-stable-patched/src/lib-storage/mail-storage.c dovecot-1.0-stable/src/lib-storage/mail-storage.c *** dovecot-1.0-stable-patched/src/lib-storage/mail-storage.c Wed Jul 27 08:07:58 2005 --- dovecot-1.0-stable/src/lib-storage/mail-storage.c Mon Jan 31 17:37:55 2005 *************** *** 12,14 **** #define CRITICAL_MSG \ ! "Internal error occurred. Refer to server log for more information." #define CRITICAL_MSG_STAMP CRITICAL_MSG " [%Y-%m-%d %H:%M:%S]" --- 12,14 ---- #define CRITICAL_MSG \ ! "Internal error occured. Refer to server log for more information." #define CRITICAL_MSG_STAMP CRITICAL_MSG " [%Y-%m-%d %H:%M:%S]" diff -r -c1 dovecot-1.0-stable-patched/src/lib-storage/mail-storage.h dovecot-1.0-stable/src/lib-storage/mail-storage.h *** dovecot-1.0-stable-patched/src/lib-storage/mail-storage.h Wed Jul 27 08:07:25 2005 --- dovecot-1.0-stable/src/lib-storage/mail-storage.h Mon Jan 31 17:37:55 2005 *************** *** 225,227 **** /* Deinitialize mailbox list request. Returns FALSE if some error ! occurred while listing. */ int mail_storage_mailbox_list_deinit(struct mailbox_list_context *ctx); --- 225,227 ---- /* Deinitialize mailbox list request. Returns FALSE if some error ! occured while listing. */ int mail_storage_mailbox_list_deinit(struct mailbox_list_context *ctx); *************** *** 239,241 **** ! /* Returns the error message of last occurred error. */ const char *mail_storage_get_last_error(struct mail_storage *storage, --- 239,241 ---- ! /* Returns the error message of last occured error. */ const char *mail_storage_get_last_error(struct mail_storage *storage, *************** *** 252,254 **** const char *name, enum mailbox_open_flags flags); ! /* Close the box. Returns FALSE if some cleanup errors occurred, but the mailbox was closed anyway. */ --- 252,254 ---- const char *name, enum mailbox_open_flags flags); ! /* Close the box. Returns FALSE if some cleanup errors occured, but the mailbox was closed anyway. */ *************** *** 373,378 **** /* Get the time message was received (IMAP INTERNALDATE). ! Returns (time_t)-1 if error occurred. */ time_t (*get_received_date)(struct mail *mail); /* Get the Date-header in mail. Timezone is in minutes. ! Returns (time_t)-1 if error occurred, 0 if field wasn't found or couldn't be parsed. */ --- 373,378 ---- /* Get the time message was received (IMAP INTERNALDATE). ! Returns (time_t)-1 if error occured. */ time_t (*get_received_date)(struct mail *mail); /* Get the Date-header in mail. Timezone is in minutes. ! Returns (time_t)-1 if error occured, 0 if field wasn't found or couldn't be parsed. */ *************** *** 380,385 **** /* Get the full virtual size of mail (IMAP RFC822.SIZE). ! Returns (uoff_t)-1 if error occurred */ uoff_t (*get_virtual_size)(struct mail *mail); /* Get the full physical size of mail. ! Returns (uoff_t)-1 if error occurred */ uoff_t (*get_physical_size)(struct mail *mail); --- 380,385 ---- /* Get the full virtual size of mail (IMAP RFC822.SIZE). ! Returns (uoff_t)-1 if error occured */ uoff_t (*get_virtual_size)(struct mail *mail); /* Get the full physical size of mail. ! Returns (uoff_t)-1 if error occured */ uoff_t (*get_physical_size)(struct mail *mail); diff -r -c1 dovecot-1.0-stable-patched/src/lib-storage/subscription-file/subscription-file.h dovecot-1.0-stable/src/lib-storage/subscription-file/subscription-file.h *** dovecot-1.0-stable-patched/src/lib-storage/subscription-file/subscription-file.h Wed Jul 27 08:08:08 2005 --- dovecot-1.0-stable/src/lib-storage/subscription-file/subscription-file.h Mon Jan 31 17:37:55 2005 *************** *** 9,11 **** ! /* Deinitialize subscription file listing. Returns FALSE if some error occurred while listing. */ --- 9,11 ---- ! /* Deinitialize subscription file listing. Returns FALSE if some error occured while listing. */ diff -r -c1 dovecot-1.0-stable-patched/src/login-common/ssl-proxy-gnutls.c dovecot-1.0-stable/src/login-common/ssl-proxy-gnutls.c *** dovecot-1.0-stable-patched/src/login-common/ssl-proxy-gnutls.c Wed Jul 27 08:08:22 2005 --- dovecot-1.0-stable/src/login-common/ssl-proxy-gnutls.c Mon Jan 31 17:37:55 2005 *************** *** 82,84 **** if (verbose_ssl) { ! /* fatal error occurred */ if (error == GNUTLS_E_FATAL_ALERT_RECEIVED) { --- 82,84 ---- if (verbose_ssl) { ! /* fatal error occured */ if (error == GNUTLS_E_FATAL_ALERT_RECEIVED) { diff -r -c1 dovecot-1.0-stable-patched/src/login-common/ssl-proxy.h dovecot-1.0-stable/src/login-common/ssl-proxy.h *** dovecot-1.0-stable-patched/src/login-common/ssl-proxy.h Wed Jul 27 08:08:14 2005 --- dovecot-1.0-stable/src/login-common/ssl-proxy.h Mon Jan 31 17:37:55 2005 *************** *** 9,11 **** /* establish SSL connection with the given fd, returns a new fd which you ! must use from now on, or -1 if error occurred. Unless -1 is returned, the given fd must be simply forgotten. */ --- 9,11 ---- /* establish SSL connection with the given fd, returns a new fd which you ! must use from now on, or -1 if error occured. Unless -1 is returned, the given fd must be simply forgotten. */

12 19

[Dovecot] Thunderbird got "Mail Server does not support secure authentication" ???
by Adrian Mak 23 Aug '05

23 Aug '05

System: Redhat AS3 postfix 2.2.5 cyrus-sasl 2.1.15 pam-mysql 0.6 dovecot 0.99.14 ( compile from source tarball) The same email account and machine, using thunderbird 1.06 to get email thru dovecot pop3, it returned "Mail Server does not support secure authentication" But in outlook express , there is no such problem I have tested SASL thru pam-mysql is work properly before install dovecot Below is my dovecot.conf /etc/dovecot.conf base_dir = /var/run/dovecot/ protocols = imap pop3 imap_listen = * pop3_listen = * ssl_disable = yes login = imap login = pop3 login_dir = /var/run/dovecot-login login_executable = /usr/local/libexec/dovecot/imap-login login_executable = /usr/local/libexec/dovecot/pop3-login imap_executable = /usr/local/libexec/dovecot/imap pop3_executable = /usr/local/libexec/dovecot/pop3 disable_plaintext_auth = no login_user = dovecot first_valid_uid = 1000 last_valid_uid = 1000 valid_chroot_dirs = /var/spool/virtual default_mail_env = /var/spool/virtual/%u auth = default auth_mechanisms = plain auth_userdb = mysql /etc/dovecot/mysql.conf auth_passdb = mysql /etc/dovecot/mysql.conf auth_executable = /usr/local/libexec/dovecot/dovecot-auth auth_user = dovecot-auth /etc/dovecot/mysql.conf db_host = localhost db_port = 3306 db_unix_socket = /tmp/mysql.sock db = postfix db_user = postfixuser db_passwd = userpostfix db_client_flags = 0 password_query = SELECT password FROM mailbox WHERE username = '%u' user_query = SELECT maildir, 1000 AS uid, 1000 AS gid FROM mailbox WHERE username = '%u'

2 1

[Dovecot] Problem with AUTH causes serverside lockup
by Tom Sommer 23 Aug '05

23 Aug '05

Hello all, I am running Dovecot alpha1, and after about 24 hours of the server working fine, it starts to lock up when I open Thunderbird to check mail. Basically I can see new mail, but when I click it, it just hangs at "Loading message...". I get the following in my maillog: Aug 23 09:25:28 palantir dovecot: auth(default): client in: AUTH 1 PLAIN service=IMAP lip=194.192.14.150 rip=80.197.147.147 Aug 23 09:25:28 palantir dovecot: auth(default): client out: CONT 1 Aug 23 09:25:28 palantir dovecot: auth(default): client in: AUTH 1 PLAIN service=IMAP lip=194.192.14.150 rip=80.197.147.147 Aug 23 09:25:28 palantir dovecot: auth(default): client out: CONT 1 Aug 23 09:25:28 palantir dovecot: auth(default): client in: AUTH 1 PLAIN service=IMAP lip=194.192.14.150 rip=80.197.147.147 Aug 23 09:25:28 palantir dovecot: auth(default): client out: CONT 1 Aug 23 09:25:28 palantir dovecot: auth(default): client in: CONT 1 [BASE64 SUM] Aug 23 09:25:28 palantir last message repeated 2 times Aug 23 09:25:28 palantir dovecot: auth(default): client in: AUTH 1 PLAIN service=IMAP lip=194.192.14.150 rip=80.197.147.147 Aug 23 09:25:28 palantir dovecot: auth(default): client out: CONT 1 Aug 23 09:25:28 palantir dovecot: auth(default): client in: AUTH 1 PLAIN service=IMAP lip=194.192.14.150 rip=80.197.147.147 Aug 23 09:25:28 palantir dovecot: auth(default): client out: CONT 1 Aug 23 09:25:28 palantir dovecot: auth(default): client in: CONT 1 [BASE64 SUM] And then it just hangs untill it finally says Aug 23 09:26:17 palantir dovecot: imap-login: Disconnected: Inactivity: method=plain, rip=80.197.147.147, lip=194.192.14.150 When I do: # killall dovecot # dovecot (restarting dovecot) then it works fine again. -- Tom Sommer

1 1

[Dovecot] Wiki of dovecot.conf file
by Marc Perkel 23 Aug '05

23 Aug '05

I made yet another new wiki page documenting the mail configuration file. Looks really nice. We can all start working on improving the docs in this file and eventually merge the docs here back into the example config file. http://wiki.dovecot.org/moin.cgi/MainConfig -- Marc Perkel - marc(a)perkel.com Spam Filter: http://www.junkemailfilter.com My Blog: http://marc.perkel.com

1 0

[Dovecot] Segfault in imap
by Todd Burroughs 23 Aug '05

23 Aug '05

Found a new segfault in imap. The first log entry always happens on my mailbox, but doesn't seem to affect anything. This is CVS version from Aug. 15. dovecot: Aug 21 17:16:56 Error: 28017 IMAP(todd): Corrupted index cache file /mailhome/new/t/b/todd/.imap/INBOX/dovecot.index.cache: Duplicated field in header: hdr.RESENT-TO dovecot: Aug 21 17:19:44 Error: child 28017 (imap) killed with signal 11 (gdb) bt full #0 0x08076b50 in index_mail_get_flags (_mail=0x80cbd20) at index-mail.c:152 data = (struct index_mail_data *) 0x80cbd84 #1 0x0808eb4d in mail_get_flags (mail=0xb7de7088) at mail.c:32 No locals. #2 0x0805a9d5 in fetch_flags (ctx=0x80c1ed0, mail=0x80cbd20, context=0x0) at imap-fetch.c:445 flags = Variable "flags" is not available. (gdb) bt #0 0x08076b50 in index_mail_get_flags (_mail=0x80cbd20) at index-mail.c:152 #1 0x0808eb4d in mail_get_flags (mail=0xb7de7088) at mail.c:32 #2 0x0805a9d5 in fetch_flags (ctx=0x80c1ed0, mail=0x80cbd20, context=0x0) at imap-fetch.c:445 #3 0x0805af0c in imap_fetch (ctx=0x80c1ed0) at imap-fetch.c:265 #4 0x0805693b in cmd_fetch (cmd=0x80bfba8) at cmd-fetch.c:166 #5 0x0805999b in _client_input (context=0x80bfb68) at client.c:334 #6 0x080a045a in io_loop_handler_run (ioloop=0x80be9b0) at ioloop-poll.c:184 #7 0x0809f9d9 in io_loop_run (ioloop=0x80be9b0) at ioloop.c:230 #8 0x08060877 in main (argc=1, argv=0xbffffa44, envp=0xbffffa4c) at main.c:229 (gdb) p *data $1 = {flags = 0, date = 0, received_date = 1124608407, virtual_size = 2870, physical_size = 2856, sent_date = {time = -1, timezone = 0}, parse_line = { field_idx = 0, start_pos = 0, end_pos = 0, line_num = 0, cache = 0}, parse_line_num = 0, parts = 0x0, envelope = 0x0, body = 0x0, bodystructure = 0x0, uid_string = 0x0, envelope_data = 0x0, seq = 11473, rec = 0xb7de7088, cache_flags = 0, access_part = 3, stream = 0x80cc224, filter_stream = 0x0, hdr_size = {physical_size = 2545, virtual_size = 2545, lines = 57}, body_size = {physical_size = 311, virtual_size = 325, lines = 14}, parser_ctx = 0x0, parsing_count = 0, keywords = { buffer = 0x0, element_size = 0}, all_cache_fields = 0x0, all_cache_fields_count = 0, save_sent_date = 0, save_envelope = 0, save_bodystructure_header = 0, save_bodystructure_body = 0, parsed_bodystructure = 0, hdr_size_set = 1, body_size_set = 1, messageparts_saved_to_cache = 0} (gdb) p *data->rec Cannot access memory at address 0xb7de7088

1 0

[Dovecot] pop-before-smtp in SQL?
by Lorens 23 Aug '05

23 Aug '05

I need pop-before-smtp (let's not discuss the advisability of the method), but I'm annoyed at the inefficiency of the classical perl script that parses the logs. A long time ago I modified the perl to add the tuple (IP, time) to an SQL table that the MTA looks at, and to clean up periodically. I found that this was the best way to deal with multiple servers that have to share an SQL database anyway. Wouldn't it be quite trivial to make dovecot write to an SQL table upon sucessful login, instead of all this log file parsing by an additional daemon?

2 4

[Dovecot] Poprelayd released for Dovecot
by dan1 22 Aug '05

22 Aug '05

Hello all. I just wanted to tell you that poprelayd is now compatible with Dovecot. I have just created a parser for the Dovecot server. This might be interesting either for you or your future customers. Maybe you will want to make some advertisement for it ? I remind that poprelayd is a service that allows a POP user to use the SMTP server of the same machine to send e-mails (making relays) for 15 minutes long after the pop login. This comes very handy for people wanting to send e-mails through their servers and also for a larger use. If you could try it that would also give some interesting feedbacks. This is the link: http://sourceforge.net/forum/forum.php?thread_id=1338704&forum_id=21494 BTW, I would need something from you: The POP login information that we can find for Dovecot in the /var/log/maillog is [::ffff:IP_ADDRESS]. Here is an example: Aug 19 23:23:02 anoigo pop3-login: Login: john [::ffff:82.208.12.243] Will this be kept the same all the time or is this ffff value a variable ? Will it be kept like this all the life of Dovecot ? Also, I would need to know if the 'pop3-login' and 'Login:' information there will also be kept. Thanks. Regards, Daniel

3 2

[Dovecot] dovecot-lda user quota
by Renzetti Federico 22 Aug '05

22 Aug '05

Sorry again people! Now my trouble is: /Your message was automatically rejected by Sieve, a mail filtering language. The following reason was given: Internal quota calculation error/ Any ideas? THK.

1 0

[Dovecot] Re: Dovecot inotify problem
by Johannes Berg 22 Aug '05

22 Aug '05

Hi Reuben, I hope you don't mind me copying the dovecot list again. > dovecot: Aug 21 04:08:22 Error: IMAP(reuben): inotify_rm_watch() failed: > Invalid argument Odd. > This is with a 2.6.13-rc6-mm1 release. I've posted to LKML because there is > also a kernel stack produced at one point which looks inotify related (but the > messages above are contant). > See http://www.ussg.iu.edu/hypermail/linux/kernel/0508.2/1180.html and the > followup from akpm. Thanks for the link. I don't think akpm is right, unless something is really odd here. Could you add debugging output for me please? Maybe something like (this is not a patch you can apply, look at line 164 in src/lib/ioloop-notify-inotify.c) ctx->inotify_fd = inotify_init(); + i_warning("inotify_init returned fd %d", ctx->inotify_fd); if (ctx->inotify_fd == -1) { and line 106: IN_CLOSE | IN_MODIFY); + i_warning("inotify_add_watch returned %d", watchdescriptor); if (watchdescriptor < 0) { and line 145: } + inotify_rm_watch("removing wd %d from inotify fd %d", io->notify_context, ctx->inotify_fd); if (inotify_rm_watch(ctx->inotify_fd, io->notify_context) < 0) Or something similar. If that doesn't help and output looks consistent (we're not removing a watch descriptor from a wrong fd etc.), can you try removing the fd_close_on_exec call please (line 171)? I don't know if that could cause trouble (I don't even think that the imap binary ever forks) but you never know. johannes

2 4

[Dovecot] Created Testimonials Page in wiki
by Marc Perkel 22 Aug '05

22 Aug '05

I created a testimonials page. Feel free to add to this. http://wiki.dovecot.org/moin.cgi/Testimonials -- Marc Perkel - marc(a)perkel.com Spam Filter: http://www.junkemailfilter.com My Blog: http://marc.perkel.com

6 7

Dovecot IDLE problem (was Re: [Dovecot] inotify support in dovecot)
by Reuben Farrelly 22 Aug '05

22 Aug '05

Hi, I've come across some possibly buggy behaviour with regards to Dovecot and the use of the IDLE keyword. Found this while testing out inotify support for Johannes - although after asking him and him reproducing it, he is of the opinion that it's not a inotify specific problem. The behaviour is that when the client is idling, Dovecot seems to only alert to the first new message received, and if a subsequent new message comes in before the client finishes idling, that second new message is not notified to the connected client. To reproduce: $ maildirmake /tmp/imap-test $ cat >/tmp/1 <<EOF From: test To: test Subject: test test! <Ctrl-D> $ MAIL=Maildir:/tmp/imap-test /usr/libexec/dovecot/imap ... A SELECT INBOX B IDLE [now, in a different terminal, copy /tmp/1 to /tmp/imap-test/new, you should instantly be notified of it in your imap session] ** Dovecot correctly responds with: * 1 EXISTS * 1 RECENT [if a second message is delivered, eg by copying /tmp/1 to /tmp/imap-test/new/2 then you should be notified as well, but this never occurs] DONE C LOGOUT $ Timo - what do you think? Reuben

4 5

[Dovecot] Dovecot Feature List
by Marc Perkel 21 Aug '05

21 Aug '05

I've added a new page to the Wiki that's sort of a Dovecot feature list overview. What I have is a good start but if anyone wants to jump in and contribute, go for it. I added it because there isn't any other place I saw that gives new people an overview of what Dovecot does. I personally passed Dovecot over a few times before somone pointed me back to it. http://wiki.dovecot.org/moin.cgi/DovecotFeatures Just my way of giving something back to the Dovecot community. -- Marc Perkel - marc(a)perkel.com Spam Filter: http://www.junkemailfilter.com My Blog: http://marc.perkel.com

1 0

[Dovecot] Failed authentication to a mysql database
by Alexandru Craiu 21 Aug '05

21 Aug '05

Hi, I use devecot-1.0.alpha1 and I can't connect to mysql when user have password. If user don't have password I can connect to mysql server. Aug 21 08:28:30 ca dovecot: Dovecot v1.0.alpha1 starting up Aug 21 08:28:32 ca dovecot: auth-worker(default): mysql: Connect failed to localhost (syscp): Access denied for user 'syscp'@'localhost' (using password: YES) - waiting for 1 seconds before retry I have a system and with ssh access. Best regards, Alexandru Craiu ________ Information from NOD32 ________ This message was checked by NOD32 Antivirus System for Linux Mail Server. part000.txt - is OK http://www.nod32.com

2 1

[Dovecot] Dovecot Problem
by Rob Kettle 21 Aug '05

21 Aug '05

Hi, is there a way to get Dovecot to output a Logout line that includes the IP address that has logged out please ? This would make it a lot easier to use with pop-before-smtp. Thanks Rob -- This message has been scanned for viruses and other dangerous content by MailScanner, and is believed to be clean.

2 1

[Dovecot] Sieve Documentation
by Marc Perkel 20 Aug '05

20 Aug '05

Where do I find the docs on Dovecot Sieve and is there a global sieve config file that I can configure for everyone?

2 1

[Dovecot] 1.0 alpha1 and postfix dovecot auth
by Kevin 19 Aug '05

19 Aug '05

Does the postfix-2.2.1-dovecot-auth patch not work with 1.0alpha1? I was using the stable branch and it was working fine. Tried out 1.0alpha1 and now when I connect to postfix it logs this error. Aug 19 11:25:19 redefine postfix/smtpd[17343]: fatal: SASL: connect failed: No such file or directory I've tried with postfix-2.2.4 and 2.2.5. Right now I'm using auth default but I also tried auth default_with_listener. Anybody else using this patch seeing this?

1 0

Re: [Dovecot] lock file
by Obantec Support 19 Aug '05

19 Aug '05

----- Original Message ----- From: "Simon Waters" <simonw(a)zynet.net> To: "Obantec Support" <support(a)obantec.net> Sent: Thursday, August 18, 2005 12:33 PM Subject: Re: [Dovecot] lock file > On Thursday 18 Aug 2005 12:19 pm, Obantec Support wrote: <snip> > > What is your question? > > Yes it is a lock file, by default (if you must use mbox) Dovecot overrides > them in 30s I believe. > > Either work out if it is genuine, and delete it if not. > > You only need to use dotlock locking if you are using NFS (or similar), and > using "mbox". Hopefully this only affects a small number of big mail servers, > and most of them would presumably switch to maildir when deploying dovecot > over NFS anyway. > > Hi not using NFS. my question is what is it, why is it happening and how do i get my users mbox working again. as soon as i delete it it comes back with 1B contents 0 Mark

2 2

[Dovecot] test80: assert/core debug info
by Jeff A. Earickson 19 Aug '05

19 Aug '05

Timo, Attached is gdb information from core dumps related to the following assert in test-80: IMAP(username): file mbox-sync-update.c: line 442 (mbox_sync_update_header_from): assertion failed: (ctx->mail.uid == 0 || ctx->mail.uid_broken || ctx->mail.uid == mail->uid) My setup: Solaris 9, mbox format. test-80 compiled with gcc 4.0.1 using the following configure options: CC=gcc CFLAGS="-g -O" CPPFLAGS=-I/opt/openssl/include LDFLAGS=-L/opt/openssl/lib \ ./configure --prefix=/opt/dovecot.test80 --with-ssl=openssl \ --with-ssldir=/opt/openssl/ssl --with-rawlog --enable-debug Note that system mailboxes are NFS mounted from the mail server to the IMAP server, which may cause you to groan. The attached debug session was done with gdb 6.3, also compiled with gcc 4.0.1. Note that some of the variables I queried were undefined (or otherwise unknown to gdb). The variable "first_nonexpunged" at line 470 of mbox-sync-rewrite.c is undefined, and I wondered why it was scoped so locally. The value of mails[idx] being undefined at mbox-sync-rewrite.c:353 also seems like bad news. Hope this helps. Jeff Earickson Colby College

3 6

[Dovecot] auth-master socket creation problem?
by Marc Perkel 19 Aug '05

19 Aug '05

I tried activating this code in the example config file and it failed to create the socket. You might want to look inti this. Running alpha1. #auth external { # socket connect { # master { # path = /var/run/dovecot/auth-master # } # } #}

2 1

[Dovecot] Lost transaction log file
by Brent Clark 19 Aug '05

19 Aug '05

Hi list I seem to be getting quite a bit of this type of messages in my syslog. Aug 19 09:14:45 mail dovecot: IMAP(bclark): Lost transaction log file /home/bclark/Maildir/dovecot.index.log seq 4 Aug 19 09:14:45 mail dovecot: IMAP(bclark): Lost transaction log file /home/bclark/Maildir/dovecot.index.log seq 4 Would anyone know how I can go about fixing / understanding this. Any tips / advice would greatfully be appreciated. Kind Regards Brent Clark

2 3

[Dovecot] ( Dovecot + Postfix + MySQL + Postfixadmin )
by Pratchaya Chatuphian 19 Aug '05

19 Aug '05

( Dovecot + Postfix + MySQL + Postfixadmin + Spamassassin + Clamav + Amavisd-new ) I need help and sample how to. Anyone can help me sir ? Thank you for advance . Pratchaya

2 1

[Dovecot] compiling dovecot-lda from cvs
by Jakob Hirsch 19 Aug '05

19 Aug '05

current dovecot-lda fails to compile: deliver.c: In function 'main': deliver.c:543: error: 'script_path' undeclared (first use in this function) deliver.c:543: error: (Each undeclared identifier is reported only once deliver.c:543: error: for each function it appears in.) deliver.c:544: warning: implicit declaration of function 'stat' deliver.c:544: error: 'st' undeclared (first use in this function) make[3]: *** [deliver.o] Error 1

2 1

[Dovecot] logging beg - again
by Peter Gervai 19 Aug '05

19 Aug '05

Hello, [Old problem; if it was fixed, I cannot see it (checked Changelog, wiki, source, as much as my grepping counts). Any help appreciated.] I have been begging since 2003 to be able to trash qpopper and use dovecot, but statistical logging of dovecot has been pretty much absent. Qpopper does this: Aug 19 11:18:02 mail in.qpopper[8099]: Stats: userid 0 0 12 51773 user.example.com 193.291.612.5 [pop_updt.c:296] Which provides us with user id, user host and ip, which is fine with dovecot. Provides furthermore unread mail count and bytes, and read but undeleted mail count and bytes. This is essential to handle low-IQ user problems basically coming down to "WE CANNOT USE EMAIL FIX IT". This topic was touched several times: http://www.google.com/search?q=site:dovecot.org+logging&hl=en&lr=&start=0&s… including my original question at http://dovecot.org/list/dovecot/2003-October/002514.html someone even dropped in a patch http://dovecot.org/pipermail/dovecot/2003-June/001618.html which seem to have disappeared in the flow of time. Probably is a member of the TODO list since then, but I cannot find the exact spot. Some comments from Timo was dropped at http://dovecot.org/pipermail/dovecot/2003-May/001545.html http://dovecot.org/pipermail/dovecot/2003-September/002277.html (and reply http://dovecot.org/pipermail/dovecot/2003-September/002281.html ) http://dovecot.org/pipermail/dovecot/2003-November/002524.html So, is there any possibility to log the entry and exit statistics of a session, regarding the amount of mail? Thanks, Peter

2 1

[Dovecot] Multiple folders/fetchmail
by Andreas Jung 19 Aug '05

19 Aug '05

Hi, my emails are processed using procmail and stored the following way: /home/ajung/Maildir/new|cur|tmp /home/ajung/Maildir/Plone|new|cur|tmp /home/ajung/Maildir/Python|new|cur|tmp When I fetch my mail using fetchmail I can only get the mails from "Maildir". However I can not access other folders like "Plone" or "Python" (using fetchmail -r Plone). I tried to tweak mail_default_env but without access. So any ideas how to configure dovecot the way I need it? Thanks in advance, Andreas

2 1