- dovecot - dovecot.org

[Dovecot] pam mysql authentication
by radus＠smartpost.ro 04 Jun '05

04 Jun '05

Hello I am trying to use pam to authenticate dovecot again a mysql database. In /etc/pam.d/dovecot i have: auth optional pam_mysql.so host=localhost db=maildb user=mailro \ passwd=xxx table=users usercolumn=address passwdcolumn=passwd \ where="disabled is NULL and deleted = ''" crypt=1 account required pam_mysql.so host=localhost db=maildb user=mailro \ passwd=xxx table=users usercolumn=address passwdcolumn=passwd \ where="disabled is NULL and deleted = ''" crypt=1 I have the same file for smtp and it works ok. However when i try to log in dovecot i get: Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: is Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: NULL Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: and Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: deleted Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: = Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: ''" Jun 4 05:02:21 tx07 dovecot-auth: You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near '"disabled)' at line 1 I am running dovecot 0.99.14 Thanks, Radu

2 1

[Dovecot] Crash and Assertion Error
by Todd Burroughs 04 Jun '05

04 Jun '05

I've attached two backtraces, one from a segfault and another from an assertion error in imap. I've seen a couple of the same assertion and this is the only segfault. It looks like they could be related. They both have to do with indexing anyway... The code is from CVS as of May 30. The segfault happened while imap was doing searches for my pine filters. I've also noticed that in pine, if I expunge a lot of mail that is spaced out through my mbox, it usually gets the headers mixed up. What I mean is that I will open one email and get the body from another. Just mentioning this in case it has some bearing. I'll be trying some things out to see if I can figure out why this happens. Can't think of any more useful info, I need sleep. Todd

1 0

[Dovecot] pam mysql authentication
by radus＠smartpost.ro 04 Jun '05

04 Jun '05

Hello I am trying to use pam to authenticate dovecot again a mysql database. In /etc/pam.d/dovecot i have: auth optional pam_mysql.so host=localhost db=maildb user=mailro \ passwd=xxx table=users usercolumn=address passwdcolumn=passwd \ where="disabled is NULL and deleted = ''" crypt=1 account required pam_mysql.so host=localhost db=maildb user=mailro \ passwd=xxx table=users usercolumn=address passwdcolumn=passwd \ where="disabled is NULL and deleted = ''" crypt=1 I have the same file for smtp and it works ok. However when i try to log in dovecot i get: Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: is Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: NULL Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: and Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: deleted Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: = Jun 4 05:02:21 tx07 dovecot-auth: Unknown option: ''" Jun 4 05:02:21 tx07 dovecot-auth: You have an error in your SQL syntax. Check the manual that corresponds to your MySQL server version for the right syntax to use near '"disabled)' at line 1 I am running dovecot 0.99.14 Thanks, Radu

1 0

[Dovecot] 1.0-test72
by Timo Sirainen 02 Jun '05

02 Jun '05

http://dovecot.org/test/ I'm not sure if this was test71-specific or if it also happened with test70, but anyway IMAP process was hanging in some situations (I think POP3 hang was fixed though? :). So, fixed that.

3 2

[Dovecot] Virtual users with sendmail ...
by Jordan Hayes 31 May '05

31 May '05

A quick search of the Wiki for the term "sendmail" reveals zero hits. Are all Dovecot users just sufficiently enlightened that they don't use sendmail? :-) Anyone have any tips (other than to not use it)? Thanks, /jordan

1 0

[Dovecot] Script to convert mboxes to maildirs?
by Mark Winslow 31 May '05

31 May '05

Does anybody know of a script of a simple method of converting mbox mail stores to maildirs? I'm moving from an old pop3 system to imap and after installing about half our office with mboxes have found that mbox does not support subfolders which some people like to use. Is there any simple way of converting? I can go to each individual account and "manually" convert swaping data around with Firefox, but I was wondering if there was an easier way. Thanks. __________________________________ Discover Yahoo! Stay in touch with email, IM, photo sharing and more. Check it out! http://discover.yahoo.com/stayintouch.html

6 5

[Dovecot] Dovecot auth process died because of Socket operation on non-socket
by Nicolas STRANSKY 30 May '05

30 May '05

Hi, I'm having problems setting up a dovecot1.0 stable on a Debian-amd64 server. The process dies with the following message: May 28 15:13:46 rouge dovecot: Dovecot v1.0-stable starting up May 28 15:13:47 rouge dovecot: Login process died too early - shutting down May 28 15:13:47 rouge dovecot: pop3-login: fd_send(-1) failed: Socket operation on non-socket May 28 15:13:47 rouge dovecot: pop3-login: fd_send(-1) failed: Socket operation on non-socket May 28 15:13:47 rouge dovecot: auth(default): accept() failed: Socket operation on non-socket May 28 15:13:47 rouge dovecot: child 15116 (auth) returned error 89 May 28 15:13:47 rouge dovecot: child 15117 (login) returned error 89 May 28 15:13:47 rouge dovecot: child 15118 (login) returned error 89 Attached is the strace of the dovecot process, I don't know if this is relevant but I can provide any needed information. The config file is like this: protocols = imap imaps pop3 pop3s ssl_disable = no ssl_cert_file = /etc/ssl/certs/pop-imap-zamok.pem ssl_key_file = /etc/ssl/private/pop-imap-zamok.pem disable_plaintext_auth = no login_processes_count = 6 mail_extra_groups = mail default_mail_env = mbox:~/Mail/:INBOX=/var/mail/%u protocol imap { } protocol pop3 { } auth_verbose = yes auth_debug = yes auth default { mechanisms = plain passdb = pam userdb = passwd user = root } Can anybody help me with this issue ? Thank's in advance ! -- Nico Une pierre, deux maisons, trois ruines, quatre fossoyeurs, un jardin, des fleurs, un raton-laveur... -+- Jacques Prévert -+-

4 12

[Dovecot] creating first.last@domain.com as user account
by sam wun 28 May '05

28 May '05

Hi, Can I create first.las(a)domain.com user account using Dovecot? Sam

3 2

[Dovecot] How to create user account
by sam wun 28 May '05

28 May '05

Hi list, I just installed Dovecot and Postfix in FreeBSD 5.4 without installing Openldap. How can I create user account for Dovecot? I compiled Dovecot with Cyrus-sasl2-saslauthd in the system. Thanks Sam

1 1

[Dovecot] 1.0-test71
by Timo Sirainen 28 May '05

28 May '05

http://dovecot.org/test/ Nothing big this time: - Added configurable logging for login process. Added configurable pop3 logout string. Based on a patch by Andrey Panin. - mysql auth: dovecot-auth worker processed kill themselves after 10min idle time - fixed auth_cache crashing with sql/ldap backends (or was it only with mysql?) - fixed pop3 hang (finally I hope? :) - fixed mbox assert-crash about the file size being unexpected - Keyword resets were written using sequences to transaction log, which caused keyword breakages. - pop3: RSET command wasn't working right - dovecot-auth was leaking memory if used with Dovecot LDA/deliver

1 0

[Dovecot] Filenames and flags
by Jon 28 May '05

28 May '05

Hi, Does anyone know how the filnames as created and/or if you can read a mail's flag or status from it? 1 .As you can set i.e. "ToDo" label on a message and then if I open from another thunderbird I can see it is marked there aswell I wonder: Is this read from the filename or some registry? 2 .Can I understand from a filename if a message is read? 3. Sometimes when I try to filter with flags no messages show. Is this a thunderbird bug or a dovecot one, or one in conjunction? Best regards -Jon

2 1

[Dovecot] imaps tls/ssl and stupid clients
by Michael Moritz 28 May '05

28 May '05

We have been using dovecot now as replacement for qpopper for over 2 weeks and it's working nicely. I have now tried to enable ssl/tls for myself and other inhouse users which also works fine. But the problem is that I use an uncertified certificate. Which is not a problem for kmail, as it just pops up a box asking whether I want to accept the certificate or not. But apparently, some stupid email programs used by other people just hang up on an uncertified certificate. I have figured out that ssl_disable = yes is the critical setting. If it's set everything works, if not, then all services allow tls/ssl and the stupid clients choke on it. Since others just use pop3 I wonder whether there is a way I can disable tls support for pop3 but enable it for imap or even only for imaps? Any ideas or am I starting from the wrong side? Thanks and regards, mimo

2 1

[Dovecot] Excessive dovecot-auth proceses
by Andrew Hutchings 28 May '05

28 May '05

Hi Guys, I may have missed something in the conf file but while using a standard mysql auth method I'm finding many dovecot-auth processing sitting doing nothing. They grow to the extent that mysql runs out of connections after a week. Any ideas? Regards Andrew -- Andrew Hutchings (A-Wing) Linux Guru - Netserve Consultants Ltd. - www.domaincity.co.uk Admin - North Wales Linux User Group - www.nwlug.org.uk BOFH excuse 423: It's not RFC-822 compliant.

2 5

[Dovecot] Assertion Failure in mbox-sync.c
by Todd Burroughs 28 May '05

28 May '05

I've been getting a few of these errors on a couple different mboxes. This is using the CVS version as of May 14. So far, these are the only errors and it looks like most/all of the older ones are gone. (maybe I shouldn't say that ;-) dovecot: May 16 17:41:07 Error: 20973 IMAP(todd.bluegenesis.com): file mbox-sync.c: line 1165 (mbox_sync_handle_eof_updates): assertion failed: (file_size >= sync_ctx->file_input->v_offset) dovecot: May 16 17:41:10 Error: child 20973 (imap) killed with signal 6 (gdb) bt full #0 0xffffe410 in ?? () No symbol table info available. #1 0xbffff518 in ?? () No symbol table info available. #2 0x00000006 in ?? () No symbol table info available. #3 0x000051ed in ?? () No symbol table info available. #4 0xb7ef1d41 in raise () from /lib/tls/libc.so.6 No symbol table info available. #5 0xb7ef3529 in abort () from /lib/tls/libc.so.6 No symbol table info available. #6 0x0809911a in i_internal_panic_handler ( fmt=0x6 <Address 0x6 out of bounds>, args=0x51ed <Address 0x51ed out of bounds>) at failures.c:374 No locals. #7 0x08099534 in i_panic ( format=0x80a5ccc "file %s: line %d (%s): assertion failed: (%s)") at failures.c:173 No locals. #8 0x0806ef4b in mbox_sync (mbox=0x80c3ba8, flags=Variable "flags" is not available. ) at mbox-sync.c:1165 index_sync_ctx = Variable "index_sync_ctx" is not available. (gdb) bt #0 0xffffe410 in ?? () #1 0xbffff518 in ?? () #2 0x00000006 in ?? () #3 0x000051ed in ?? () #4 0xb7ef1d41 in raise () from /lib/tls/libc.so.6 #5 0xb7ef3529 in abort () from /lib/tls/libc.so.6 #6 0x0809911a in i_internal_panic_handler ( fmt=0x6 <Address 0x6 out of bounds>, args=0x51ed <Address 0x51ed out of bounds>) at failures.c:374 #7 0x08099534 in i_panic ( format=0x80a5ccc "file %s: line %d (%s): assertion failed: (%s)") at failures.c:173 #8 0x0806ef4b in mbox_sync (mbox=0x80c3ba8, flags=Variable "flags" is not available. ) at mbox-sync.c:1165 #9 0x08068891 in mbox_transaction_commit (_t=0x80cf430, flags=Variable "flags" is not available. ) at mbox-transaction.c:56 #10 0x0808d333 in mailbox_transaction_commit (t=0x0, flags=0) at mail-storage.c:418 #11 0x08058b56 in cmd_store (cmd=0x80bcb98) at cmd-store.c:122 #12 0x08059685 in _client_input (context=0x80bcb58) at client.c:334 #13 0x0809e5da in io_loop_handler_run (ioloop=0x80bb9b0) at ioloop-poll.c:184 #14 0x0809dcf9 in io_loop_run (ioloop=0x80bb9b0) at ioloop.c:218 #15 0x08060587 in main (argc=1, argv=0xbffffa44, envp=0xbffffa4c) at main.c:228 I'm not sure about the variables here, the core file's still here if any other info will help: (gdb) p sync_ctx->input->real_stream->statbuf $5 = {st_dev = 0, __pad1 = 0, __st_ino = 0, st_mode = 0, st_nlink = 0, st_uid = 0, st_gid = 0, st_rdev = 0, __pad2 = 0, st_size = 4294967295, st_blksize = 0, st_blocks = 0, st_atim = {tv_sec = 1116279667, tv_nsec = 0}, st_mtim = {tv_sec = 1116279667, tv_nsec = 0}, st_ctim = { tv_sec = 1116279667, tv_nsec = 0}, st_ino = 0} (gdb) p sync_ctx->file_input->v_offset $8 = 142294527 The mbox size is larger than 142294527 I did notice this, but I'm not sure if I'm looking at the correct variable and don't think the size is large enough to matter, anyway. (gdb) pt sync_ctx->input->real_stream->statbuf->st_size type = long long int (gdb) pt sync_ctx->file_input->v_offset type = long long unsigned int Todd

2 6

[Dovecot] Plain Text Auth
by Adam Barrett 28 May '05

28 May '05

I dont know where I went wrong, I have got the Dovecot finally looking for an auth, but it doesnt accept my passwords. Let me know what you need to see and I will post it... THanks! -- Adam Barrett dragen(a)gmail.com

2 3

[Dovecot] Migrating Dovecot 0.99 to 1.0stable
by Nicolas STRANSKY 28 May '05

28 May '05

Hi, I'm planing to move a big mail server currently under Dovecot 0.99 to Dovecot 1.0 stable. One problem I had once when doing this was that all the UIDL had to change and that all users using pop3 and leaving their messages on the server had to re-download all of them, which is annoying. I'd like to know to the UIDL really have to change when migrating from 0.99 to 1.0stable or if this was a configuration problem on my side. Are there any tips for this to be as transparent as possible for the users ? Thank you. -- Nico L'idée que la science peut et doit être organisée selon des règles à la fois fixes et universelles est utopique et pernicieuse. -+- Paul Feyerabend -+-

2 2

[Dovecot] 1.0-test70
by Timo Sirainen 28 May '05

28 May '05

http://dovecot.org/test/ - vpopmail authentication fix - many mmap_disable=yes fixes and a few optimizations - pop3 hang fix - mbox fix for "last-uid lost" error (hopefully last one) - mbox fix for losing dirty flag, causing lost message flags mmap_disable=yes seems to be finally working pretty well. There should be no more cache file related errors with it enabled. I'm still seeing "UID inserted in the middle of mailbox" error a couple of times in hour (out of ~320000 logins/h), so mbox code is still not perfect but I'd think it's good enough for normal use :)

5 20

[Dovecot] Dovecot as an email proxy
by sam wun 28 May '05

28 May '05

Hi list, I m new to Dovecot. I have installed the software in freebsd 5.4 and I m wondering how to setup up a mail proxy gateway that consist of Dovecot, postfix(or qmail), ASSP, Clamav in a box? I m very apprecate for every suggestion. Thanks Sam

1 0

[Dovecot] Transaction log file issue on dovecot-stable
by John and Catherine Allen 28 May '05

28 May '05

Situation: dovecot-stable-20050528 on x86, Linux 2.4.30, ext3, maildir I'm trying to use the imapsync utility (http://www.linux-france.org/prj/imapsync/) to copy 1500 messages from a UW-imap server to dovecot. After about 100 messages are successfully appended, I'm seeing this in the server log, following which all APPENDs fail. May 28 09:01:06 [dovecot] IMAP(allen): utime(/home/allen/Maildir/dovecot-uidlist.lock) failed: No such file or directory May 28 09:01:06 [dovecot] IMAP(allen): Our dotlock file /home/allen/Maildir/dovecot-uidlist.lock was deleted May 28 09:01:06 [dovecot] IMAP(allen): Corrupted transaction log file /home/allen/Maildir/dovecot.index.log: Append with UID 3718, but next_uid = 3719 May 28 09:01:06 [dovecot] IMAP(allen): Lost transaction log file /home/allen/Maildir/dovecot.index.log seq 6 May 28 09:01:07 [dovecot] IMAP(allen): Lost transaction log file /home/allen/Maildir/dovecot.index.log seq 6 May 28 09:01:07 [dovecot] IMAP(allen): Corrupted transaction log file /home/allen/Maildir/dovecot.index.log: Append with UID 3718, but next_uid = 3719 John -- John Allen Bofferdange, Luxembourg allen(a)vo.lu http://www.homepages.lu/allen

1 0

Re: [Dovecot] imap disconnects on my account only
by Mitch Pirtle 28 May '05

28 May '05

Whups, reply-to went to the poster :-/ On 5/27/05, Chris Wakelin <c.d.wakelin(a)reading.ac.uk> wrote: > Just a guess, but have you changed your /etc/groups (or equivalent) file > today? I'm not a Fedora expert (or dovecot-0.99), though. I think it's > more likely to be a change in the user/group databases than a change in > Dovecot. I have added myself to another group (for a website directory) but have not changed my default group or anything like that. -- Mitch

3 3

[Dovecot] imap disconnects on my account only
by Mitch Pirtle 28 May '05

28 May '05

Talk about personal problems! I am using dovecot-0.99.13-4.FC2, and everything has been going fine for months. Earlier this afternoon, Thunderbird's status pane would say 'Sending authenticate login information...' and I would no longer receive email. When I checked with others, they were fine and dandy. I tried kmail, evolution, and even tried webmail. All had connection errors. Checking the logs I can see the following: May 27 14:07:58 mongo imap-login: Login: mitchy [162.84.141.200] May 27 14:07:58 mongo imap(mitchy): getgroups() failed: Invalid argument May 27 14:07:58 mongo dovecot: child 3264 (imap) returned error 89 I can see new messages in $Maildir, so it is all about authentication, which I am completely clueless about as it has been working for as long as I have had this server. What steps can I take to debug the situation? -- Mitch

2 1

[Dovecot] Index corruption
by Dan Sully 27 May '05

27 May '05

I've been seeing this in my log (test69) for a user who has Thunderbird as a client: Error: IMAP(andrew): Corrupted index file /home/a/andrew/Maildir/dovecot.index: header doesn't end with NUL Thoughts? -D -- <dr.pox> what're the units of the coefficient of agnosticity? I don't knows per hour?

1 0

[Dovecot] Inquiring about status of version 1.x
by Jean-Daniel Beaubien 27 May '05

27 May '05

Hi, I've been running dovecot for awhile (about 18 months now) and I am very happy with it. I am currently planning an upgrade for the office server and I am wondering how is 1.0 going? Is it stable enough for production? I read a thread in the list from may 5th talking about the stability, and it seemed pretty decent. Anyways just looking for a bit of feedback on the evolution of 1.0 Thanks, Jean-Daniel

2 1

Re: Core dumps when opening an IMAP folder (Was: Re: [Dovecot] 1.0-test70)
by Tero Ripattila 26 May '05

26 May '05

Hello Timo, I can reproduce this issue even with mmap_disable and mmap_no_write set to yes, please see the following back trace: $ gdb /usr/local/libexec/dovecot/imap /tmp/imap.core GNU gdb 6.3 Copyright 2004 Free Software Foundation, Inc. GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as "i386-unknown-openbsd3.6"... Core was generated by `imap'. Program terminated with signal 11, Segmentation fault. Reading symbols from /usr/lib/libc.so.34.2...done. Loaded symbols for /usr/lib/libc.so.34.2 Reading symbols from /usr/libexec/ld.so...done. Loaded symbols for /usr/libexec/ld.so #0 0x1c03d7f2 in mail_transaction_log_view_set (view=0x3c020500, min_file_seq=8, min_file_offset=7148, max_file_seq=8, max_file_offset=7148, type_mask=8) at mail-transaction-log-view.c:102 102 if (min_file_seq == view->log->tail->hdr.prev_file_seq && (gdb) #0 0x1c03d7f2 in mail_transaction_log_view_set (view=0x3c020500, min_file_seq=8, min_file_offset=7148, max_file_seq=8, max_file_offset=7148, type_mask=8) at mail-transaction-log-view.c:102 file = (struct mail_transaction_log_file *) 0x2b1dbec8 first = (struct mail_transaction_log_file *) 0xb21b372 seq = 0 end_offset = 4324021345303134216 ret = 3932679 #1 0x1c03a17a in view_sync_get_expunges (view=0x3c01f700, expunges_r=0xcfbf97d0) at mail-index-view-sync.c:105 hdr = (const struct mail_transaction_header *) 0xe4e1c00 src = (struct mail_transaction_expunge *) 0xff src_end = (struct mail_transaction_expunge *) 0x3c011020 dest = (struct mail_transaction_expunge *) 0x0 data = (const void *) 0x23ee00 count = 1117130127 ret = 8 #2 0x1c03a366 in mail_index_view_sync_begin (view=0x3c01f700, sync_mask=255, ctx_r=0x8) at mail-index-view-sync.c:176 hdr = (const struct mail_index_header *) 0x3c01f804 ctx = (struct mail_index_view_sync_ctx *) 0x1c039b4d map = (struct mail_index_map *) 0xff mask = 8 want_mask = 0 expunges = {buffer = 0x0, element_size = 0} #3 0x1c02d6cd in index_mailbox_sync_init (box=0x3c01e840, flags=0, failed=0) at index-sync.c:150 ctx = (struct index_mailbox_sync_context *) 0x3c011020 sync_mask = 1006764673 #4 0x1c019b25 in maildir_storage_sync_init (box=0x3c01e840, flags=MAILBOX_SYNC_FLAG_FAST) at maildir-sync.c:991 ctx = (struct maildir_sync_context *) 0x3c0139b0 ret = 0 #5 0x1c040fc4 in mailbox_sync_init (box=0x8, flags=MAILBOX_SYNC_FLAG_FAST) at mail-storage.c:333 No locals. #6 0x1c015150 in imap_sync_init (client=0x3c020000, box=0x3c01e840, flags=MAILBOX_SYNC_FLAG_FAST) at imap-sync.c:43 ctx = (struct imap_sync_context *) 0x3c01d1c0 #7 0x1c01554f in cmd_sync (cmd=0x3c020040, flags=MAILBOX_SYNC_FLAG_FAST, tagline=0x3c00056f "OK Search completed.") at imap-sync.c:210 ctx = (struct cmd_sync_context *) 0x3c0230a0 #8 0x1c00eb66 in cmd_search (cmd=0x3c020040) at cmd-search.c:102 client = (struct client *) 0x3c020000 sargs = (struct mail_search_arg *) 0x8 args = (struct imap_arg *) 0x3c021048 args_count = 8 error = 0x0 charset = 0x0 #9 0x1c00fa7d in cmd_uid (cmd=0x3c020040) at cmd-uid.c:19 cmd_name = 0x3c0210f8 "SEARCH" #10 0x1c01023b in client_handle_input (cmd=0x3c020040) at client.c:334 client = (struct client *) 0x3c020000 #11 0x1c010369 in _client_input (context=0x3c020000) at client.c:383 client = (struct client *) 0x3c020000 cmd = (struct client_command_context *) 0x3c020040 #12 0x1c050a68 in io_loop_handler_run (ioloop=0x3c01d000) at ioloop-poll.c:184 data = (struct ioloop_handler_data *) 0x3c0110a0 pollfd = (struct pollfd *) 0x3c01e000 tv = {tv_sec = 7, tv_usec = 9219} io = (struct io *) 0x3c0111c0 t_id = 2 msecs = 8 ret = 0 call = 1 #13 0x1c050505 in io_loop_run (ioloop=0x3c01d000) at ioloop.c:218 No locals. #14 0x1c016d37 in main (argc=3, argv=0xcfbf9a3c, envp=0xcfbf9a4c) at main.c:228 No locals. (gdb) Any suggestions how to fix these ongoing problems? Thanks, Tero -- Tero Ripattila

1 0

[Dovecot] IMAP Memory Error
by John McAree 25 May '05

25 May '05

Hi, I recently upgraded dovecot on an OpenBSD server from the 0.99.x series to the 1.0-test series to eliminate a problem. That was fixed, however I am now experiencing issues with IMAP(S) connections. The main IMAPS use to the server is via Squirrelmail (many users login with it), however I typically use Thunderbird. The user mailboxes are stored in Maildir format. Basically, moving, deleting or copying mails tends not to work. I have managed to move mails in Thunderbird if the source mailbox is small, and deleting mails usually works in Thunderbird. However, in Squirrelmail deleting or moving results in: "ERROR : Connection dropped by imap-server. Query: COPY 5629 "<dest-mailbox>" /var/log/maillog reports: May 24 23:19:03 orca dovecot: IMAP(jmcaree): pool_system_malloc(): Out of memory The Out of memory error appears when moving mails with Thunderbird, also. I had originally upgraded to dovecot1.0-test66 via a patch supplied by an OpenBSD porter. Today I decided to compile -test70 to see if it was any better. Unfortunately, this issue still exists. I tried upgrading Squirrelmail to the latest (1.4.4 from 1.4.3a), but no luck there. Since it's happening with both it and Thunderbird, though, I don't see it being a client issue. Server is: # uname -a OpenBSD my.hostname.com 3.7 GENERIC.RAID#0 amd64 I'd appreciate any assistance or advice on this issue! Obviously, I'd prefer to not have to downgrade to the 0.99.x series. :-) I'm not subscribed to the list, so please CC me with any replies. TIA, John.

3 8