- dovecot - dovecot.org

What INTERNALDATE does dovecot with mbox storage set on a COPY'd message?
by Steinar Bang 15 Sep '17

15 Sep '17

When a message is copied to a folder on dovecot with mbox storage, is the mtime of the saved mbox file set to the time of the save? Or is the mtime set to the Date: field of the source message that is saved? If there is a difference in the behaviour, do someone know the dovecot version number where the change happened? The reason I'm asking is a problem reported on the Gnus imap client in August 2016, where messaged moved by Gnus showed up with the wrong order and/or wrong date in other imap clients. (The reason for the different message ordering was that the other clients use the INTERNALDATE and that was changed to the time of message move when Gnus was used. Gnus use the Date of the source message) Thanks! - Steinar (Gnus user)

2 4

[RFC master-2.2 0/1] Support OpenSSL 1.1 API for setting allowed TLS versions
by Apollon Oikonomopoulos 14 Sep '17

14 Sep '17

Hi, I came up with the following patch while trying to figure out a good solution for the situation described in Debian bug #871987[1]. In short, OpenSSL in Debian unstable has disabled TLSv1.0 and TLSv1.1 *by default*. That means that unless an application requests otherwise, only TLSv1.2 is supported. In the world of e-mail this is seemingly an issue, as there are still way too many old clients out there supporting only TLSv1 or TLSv1.1. Now, traditionally OpenSSL 0.9.8/1.0 used SSL_CTX_set_options() to allow *disabling* specific protocols, without offering a way to enable previously disabled protocols. OpenSSL 1.1 introduced a dedicated API[2] to set allowed protocol versions, taking a linear version approach: the application may request a minimum and a maximum allowed version (inclusive), allowing all versions inbetween as well. Dovecot's existing ssl_protocols option is probably not ideal to use with this new "linear" model. Instead, I introduced two new options, ssl_min_proto_version and ssl_max_proto_version, that map directly to OpenSSL 1.1 concepts. I have tested the patch with both OpenSSL 1.0 and OpenSSL 1.1. With OpenSSL 1.1 it works as expected; with OpenSSL 1.0 it doesn't seem to break anything. Other than that, this is a first version; I'm sure there are still things to improve, so comments are welcome :) Regards, Apollon [1] https://bugs.debian.org/871987 [2] https://www.openssl.org/docs/man1.1.0/ssl/SSL_CTX_set_min_proto_version.html Apollon Oikonomopoulos (1): Support setting min/max SSL protocol version doc/example-config/conf.d/10-ssl.conf | 4 ++++ src/config/config-parser.c | 25 +++++++++++++++++++++ src/lib-master/master-service-ssl-settings.c | 4 ++++ src/lib-master/master-service-ssl-settings.h | 2 ++ src/lib-master/master-service-ssl.c | 2 ++ src/lib-ssl-iostream/iostream-openssl-common.c | 12 +++++++++++ src/lib-ssl-iostream/iostream-openssl.h | 1 + src/lib-ssl-iostream/iostream-ssl.h | 2 ++ src/login-common/ssl-proxy-openssl.c | 30 ++++++++++++++++++++++++++ 9 files changed, 82 insertions(+) -- 2.14.1

2 2

disable imap for ldap user
by Markus Rosjat 13 Sep '17

13 Sep '17

hi there, I have a LDAP dir with an attribute set to 0 or 1 and in my old setup (a courier server) I used this attribute to map it to an authoption called disableimap. This prevent users to access the mailbox with imap protocol. So the question is what should I set in dovecot to get the same behaviour? I looked at the docs but the part with the pass_ilter and service doesn't really fit. Some advice would be appreciated regards -- Markus Rosjat fon: +49 351 8107223 mail: rosjat(a)ghweb.de G+H Webservice GbR Gorzolla, Herrmann Königsbrücker Str. 70, 01099 Dresden http://www.ghweb.de fon: +49 351 8107220 fax: +49 351 8107227 Bitte prüfen Sie, ob diese Mail wirklich ausgedruckt werden muss! Before you print it, think about your responsibility and commitment to the ENVIRONMENT

3 4

Problems to configure IMAP Quota
by Jacques Belin 13 Sep '17

13 Sep '17

Hello, We manage a mail server using Dovecot under Debian. Since a long time, we run nightly a script permitting to display the storage usage of each user on the webmail, using internal calls. The usage on each mailbox is stored in a Mysql database. For several reasons, we would now want to use the IMAP quota feature, not only to let users have the quota displayed from their Mail clients. But testing that features, I encounter two problems : 1) It seems that when we use the sql dict, a map contaning the patern "priv/quota/limit/messages" is mandatory. Not specifying it in dovecot-dict-sql.conf.ext issues an error. As we are interested only by the storage size and don't want to process the number of messages, how to get rid of it ? 2) We store the storage value in kilobytes. But the plugin seems to only accept storage in bytes, Is there any way to let know to dovecot that the value stored in the database is in kilobytes ? (of course, I tried to put "size/1024" in the value_field field of the map. It works, but generate a lot of error lines in the dovecot log as it create a syntaxly incorrect MySQL uodate request...) Jacques. -- The last man connected to the Interet was browsing some old WebSites. "You have new mail" appeared on the screen... --------------------------- adapted from a short Fredric Brown's story

3 3

concering dovecot logging
by Rajesh M 13 Sep '17

13 Sep '17

hi had a question concerning dovecot lda logging. deliver_log_format = From:<%f>-<%e> :: Subject:<%s> :: Status:<%$> :: MsgID:<%m> :: Size<%p> :: vSize<%w> am getting %e ie envelope sender as MAILER-DAEMON in the logs Sep 11 08:35:50 lda(noc(a)xxx.com): Info: sieve: From:<bmmsro0612(a)xxx.co.in>-<MAILER-DAEMON> :: Subject:<Fw: ccccccn> :: Status:<forwarded to <nocforward(a)yyyyy.com>> :: MsgID:<<OFBECDF3FA.57B3772C-ON65258198.00111392-65258198.00111394(a)xxx.co.in>> :: Size<12497> :: vSize<12687> what could be the reason ? thanks, rajesh

2 1

Problem w/ Dovecot authentication against AD
by Garry Glendown 13 Sep '17

13 Sep '17

Hi, I had to start using Dovecot on a machine as the new OS does not come with Cyrus IMAP anymore. After multiple problems, I managed to get everything working, including LDAP authentication against the (old) Novell LDAP server. Anyway, the authentication is supposed to be migrated to the new Windows AD. For other tools, I successfully migrated the config to use AD, but somehow Dovecot does not work as it should. I've been going back and forth, trying everything I could think of, but still can't get it to work. Here's the excerpt from the config file: hosts = 10.10.10.210 uris = ldap://10.10.10.210:389 dn = cn=Administrator,cn=Users,dc=srv,dc=SLD,dc=net dnpass = PASSWORD tls = no debug_level = -1 auth_bind = yes ldap_version = 3 base = DC=srv,dc=SLD,dc=net deref = never scope = subtree user_attrs = sAMAccountName=user user_filter = (&(sAMAccountName=%n)(objectclass=person)) pass_attrs = sAMAccountName=user pass_filter = (&(sAMAccountName=%n)(objectclass=person)) iterate_attrs = mail=user iterate_filter = (objectclass=person) default_pass_scheme = PLAIN The problem might be caused by the referal-info sent by the AD, which I can see both in the results dovecot gets (checked with tcpdump), as well as in ldapsearch ... apart from the actual search result, I always get three additional results: # refldap://DomainDnsZones.srv.SLD.net/DC=DomainDnsZones,DC=srv,DC=SLD,DC=net # refldap://ForestDnsZones.srv.SLD.net/DC=ForestDnsZones,DC=srv,DC=SLD,DC=net # refldap://srv.SLD.net/CN=Configuration,DC=srv,DC=SLD,DC=net >From what I can see in the pcap as well as some of the logs, dovecot binds to the AD, sends out the LDAP query correctly, gets the lookup result with the user queried plus the above three referrals, then unbinds from the (named) bind, attempts a simple bind without dn/dnpass (multiple times), and finally sends three additional search requests under the search bases cn=Configuration,DC=srv,DC=SLD,DC=net DC=ForestDnsZones,DC=srv,DC=SLD,DC=net DC=DomainDnsZones,DC=srv,DC=SLD,DC=net These three requests are denied by the AD as they are not permitted without a successful prior bind. Dovecot then fails the auth process. Is there a way to stop Dovecot from using the referals? Openldap seems to have an option to disable referals, but Dovecot does not allow that option in its LDAP config, and having the option set in the global ldap.conf doesn't seem to help any, either. Is there possibly a way to disable the referal information on the AD side? Thanks, Garry -- PGP Fingerprint: A79F A33F 5B13 BEB7 A51D 274F F99C 3AE2 4BCB 7015

3 3

Re: Dovecot and Letsencrypt certs
by Daniel Miller 13 Sep '17

13 Sep '17

And remove that "postfix reload" command - Postfix doesn't require explicit reloading. It'll pickup the changed cert automagically. Daniel On 9/12/2017 9:26 AM, Daniel Miller wrote: > What's wrong with using a certbot "post-hook" script such as: > > #!/bin/bash > echo "Letsencrypt renewal hook running..." > echo "RENEWED_DOMAINS=$RENEWED_DOMAINS" > echo "RENEWED_LINEAGE=$RENEWED_LINEAGE" > > if grep --quiet "your.email.domain" <<< "$RENEWED_DOMAINS"; then > /usr/local/sbin/dovecot reload > /usr/sbin/postfix reload > fi > > Daniel > > On 9/11/2017 1:57 PM, Joseph Tam wrote: >> <master(a)remort.net> writes: >> >>> "writing a script to check the certs" - there is no need to write any >>> scripts. As one mentioned, it's done by a hook to certbot. Please read >>> the manuals for LE or certbot. The issue you have is quite common and >>> of course certbot designed to do it for you. >> >> Won't work, of course, if you employ the least-privilege security >> principle >> and run the certbot as a non-privileged user. You'll need a script with >> administrator privileges to detect cert renewals and restart the >> service. >> >> I can't willy-nilly restart dovecot to pick up renewed certs without >> webmail disruptions. (My webmail uses persistent IMAP sessions.) >> All users get dumped and need to re-authenticate. If a user happens to >> be drafting a message that took 2 hours to compose, I will surely hear >> about it. I should probably install a IMAP proxy to isolate the effects >> of restarts. Most mail readers cope with restarts just fine, though. >> >> Joseph Tam <jtam.home(a)gmail.com>

3 3

Re: Dovecot and Letsencrypt certs
by Joseph Tam 13 Sep '17

13 Sep '17

On Tue, 12 Sep 2017, dovecot-request(a)dovecot.org wrote: > What's wrong with using a certbot "post-hook" script such as: > > #!/bin/bash > echo "Letsencrypt renewal hook running..." > echo "RENEWED_DOMAINS=$RENEWED_DOMAINS" > echo "RENEWED_LINEAGE=$RENEWED_LINEAGE" > > if grep --quiet "your.email.domain" <<< "$RENEWED_DOMAINS"; then > ??? /usr/local/sbin/dovecot reload > ?? /usr/sbin/postfix reload > fi Nothing, if you let your certbot run as root. (I'm assuming that's how these hooks work -- it's called after cert renewal using the same credentials as the certbot.) If you use privilege separation, and run the certbot as a regular user process, this won't work. You might have this scenario if, for example using the context of web serving, you serve many virtual sites with different owners, and you don't want give each owner administrative access. Joseph Tam <jtam.home(a)gmail.com>

2 1

Dynamic host with password plugin
by Jorge Bastos 12 Sep '17

12 Sep '17

Howdy, I’m making my multi-server instalation ready, but I’m facing just one small issue, that is with password plugin. So, in config.inc.php of it I have: config['password_db_dsn'] = 'mysql://webmail:bdkddddddz@192.168.69.222/postfix'; but, as I’m using in roundcube’s config.inc.php “dynamic” host: $config['default_host'] = 'mail.%s'; Can I have in the password plugin config.inc.php the same variable? (I can use same user/password/db on both servers for password change) Thanks in advanced,

1 0

Re: Dovecot and Letsencrypt certs
by Joseph Tam 12 Sep '17

12 Sep '17

<master(a)remort.net> writes: > "writing a script to check the certs" - there is no need to write any > scripts. As one mentioned, it's done by a hook to certbot. Please read > the manuals for LE or certbot. The issue you have is quite common and > of course certbot designed to do it for you. Won't work, of course, if you employ the least-privilege security principle and run the certbot as a non-privileged user. You'll need a script with administrator privileges to detect cert renewals and restart the service. I can't willy-nilly restart dovecot to pick up renewed certs without webmail disruptions. (My webmail uses persistent IMAP sessions.) All users get dumped and need to re-authenticate. If a user happens to be drafting a message that took 2 hours to compose, I will surely hear about it. I should probably install a IMAP proxy to isolate the effects of restarts. Most mail readers cope with restarts just fine, though. Joseph Tam <jtam.home(a)gmail.com>

2 1

RE: dovecot Digest, Vol 173, Issue 28 (INTERNAL)
by Arvid.Eikas＠telenor.com 12 Sep '17

12 Sep '17

Hi, I enabled rawlog. Everything seems to be OK but the dovecot-log shows a fatal error and core dump. (created a core file) Arvid Rawlog in <<< STAT >>> <<< LIST >>> <<< UIDL 1 >>> <<< UIDL >>> <<< QUIT >>> Rawlog out <<< +OK Logged in. >>> <<< +OK 22 17589388 >>> <<< +OK 22 messages: 1 6725 ¨¨¨¨¨¨ 22 17387080 . >>> <<< +OK 1 1504264023.M267772P16598V0000000000000027I00000000046A5436.nsmx2.nsc.no,S=6571 >>> <<< +OK 1 1504264023.M267772P16598V0000000000000027I00000000046A5436.nsmx2.nsc.no,S=6571 ........ 22 1505125157.M901211P7821V0000000000000027I00000000046A340F.nsmx2.nsc.no,S=17164095 . >>> <<< +OK Logging out. >>> DOVECOT LOG Sep 12 11:40:56 pop3-login: Debug: SSL: where=0x2001, ret=1: SSLv3 read finished A [88.89.118.45] Sep 12 11:40:56 pop3-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write session ticket A [88.89.118.45] Sep 12 11:40:56 pop3-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write change cipher spec A [88.89.118.45] Sep 12 11:40:56 pop3-login: Debug: SSL: where=0x2001, ret=1: SSLv3 write finished A [88.89.118.45] Sep 12 11:40:56 pop3-login: Debug: SSL: where=0x2001, ret=1: SSLv3 flush data [88.89.118.45] Sep 12 11:40:56 pop3-login: Debug: SSL: where=0x20, ret=1: SSL negotiation finished successfully [88.89.118.45] Sep 12 11:40:56 pop3-login: Debug: SSL: where=0x2002, ret=1: SSL negotiation finished successfully [88.89.118.45] Sep 12 11:40:56 pop3-login: Info: Login: user=<viboge>, method=PLAIN, rip=88.89.118.45, lip=148.123.160.116, mpid=18250, TLS, session=<nR4H1/pYvc1YWXYt> Sep 12 11:40:56 pop3(viboge) Session-ID nR4H1/pYvc1YWXYt RemoteIP 88.89.118.45 Maildir /var/nextmail/nfs2.flex14/49/79/841 Info: Disconnected: Logged out top=0/0, retr=0/0, del=0/22, size=17589388, totalread=32, totalsent=2181, uidl=22/50a23327 Sep 12 11:40:56 pop3-login: Debug: SSL alert: close notify [88.89.118.45] Sep 12 11:40:56 pop3-login: Error: ENGINE_finish, bad functional reference count Sep 12 11:40:56 pop3-login: Fatal: master: service(pop3-login): child 18247 killed with signal 6 (core dumped) -----Original Message----- From: Aki Tuomi [mailto:aki.tuomi@dovecot.fi] Sent: 12. september 2017 08:37 To: dovecot(a)dovecot.org; Eikås Arvid Subject: Re: dovecot Digest, Vol 173, Issue 28 (INTERNAL) ~$ openssl s_client -connect 192.168.122.14:110 -starttls pop3 CONNECTED(00000003) <snip/> Verify return code: 10 (certificate has expired) --- +OK Dovecot ready. USER testuser1 +OK PASS pass +OK Logged in. LIST +OK 11 messages: 1 14 2 14 3 14 4 14 5 14 6 14 7 14 8 14 9 14 10 14 11 14 . QUIT DONE and no crash occurs. Using Dovecot v2.2.32 (dfbe293) Aki On 12.09.2017 09:33, Arvid.Eikas(a)telenor.com wrote: > Hi, > > It is quite easy. > I use a client (thunderbird or windows live mail) set it up to use starttls on standard port 110. Logon and just do a list on the mailbox. The fatal error occurred when I logoff. > > Arvid > > -----Original Message----- > From: dovecot [mailto:dovecot-bounces@dovecot.org] On Behalf Of > dovecot-request(a)dovecot.org > Sent: 11. september 2017 14:57 > To: dovecot(a)dovecot.org > Subject: dovecot Digest, Vol 173, Issue 28 > > Send dovecot mailing list submissions to > dovecot(a)dovecot.org > > To subscribe or unsubscribe via the World Wide Web, visit > https://dovecot.org/mailman/listinfo/dovecot > or, via email, send a message with subject or body 'help' to > dovecot-request(a)dovecot.org > > You can reach the person managing the list at > dovecot-owner(a)dovecot.org > > When replying, please edit your Subject line so it is more specific than "Re: Contents of dovecot digest..." > > > Today's Topics: > > 1. Re: pop3-login core dump when using TLSSTART on version > dovecot-2.2.32 (INTERNAL) (Aki Tuomi) > 2. Re: Per-user quota (passwd) (Evgeniy Korneechev) > 3. Re: Per-user quota (passwd) (Aki Tuomi) > 4. Re: Is it possible to disable pipelining in imapc? (Nagy, > Attila) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Mon, 11 Sep 2017 13:57:19 +0300 > From: Aki Tuomi <aki.tuomi(a)dovecot.fi> > To: dovecot(a)dovecot.org > Subject: Re: pop3-login core dump when using TLSSTART on version > dovecot-2.2.32 (INTERNAL) > Message-ID: <cd450054-53c4-2f84-eba7-7ce602c26892(a)dovecot.fi> > Content-Type: text/plain; charset=utf-8 > > Can you outline the exact steps you perform to get this? > > Aki > > On 11.09.2017 13:42, Arvid.Eikas(a)telenor.com wrote: >> Hi, >> >> I switched back to 2.2.27 with the same config that I am using for 2.2.32 and it work fine. >> >> Sep 11 11:49:37 imap-login: Info: Login: user=<viboge>, method=PLAIN, >> rip=88.89.118.45, lip=148.123.160.116, mpid=18709, TLS, >> session=<v7o22OZYrsdYWXYt> Sep 11 11:49:40 imap(mailuser) Session-ID >> v7o22OZYrsdYWXYt RemoteIP 88.89.118.45 Maildir >> /var/nextmail/nfs2.flex14/49/79/841 Info: Logged out in=4518 >> out=273720 deleted 0 expunged 0 trashed 0 Sep 11 11:49:40 imap-login: >> Debug: SSL alert: close notify [88.89.118.45] >> >> How could I proceed? Any clue? It is quite annoying to see this entry in the log for each session. >> >> Arvid >> >> >> >> >> -----Original Message----- >> From: Aki Tuomi [mailto:aki.tuomi@dovecot.fi] >> Sent: 11. september 2017 09:18 >> To: Eik?s Arvid; dovecot(a)dovecot.org >> Subject: Re: pop3-login core dump when using TLSSTART on version >> dovecot-2.2.32 (INTERNAL) >> >> Hi! >> >> I tried to reproduce this problem with dovecot-2.2.32 and OpenSSL 1.0.1k and was not able to. I enabled -DREF_CHECK on OpenSSL, but to no avail, the process did not crash. Is there something else you've done? >> >> Aki >> >> >> On 11.09.2017 08:07, Arvid.Eikas(a)telenor.com wrote: >>> Hi, >>> >>> Here is the gdb output. >>> >>> Arvid >>> >>> GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-94.el7 Copyright (C) >>> 2013 Free Software Foundation, Inc. >>> License GPLv3+: GNU GPL version 3 or later >>> <http://gnu.org/licenses/gpl.html> >>> This is free software: you are free to change and redistribute it. >>> There is NO WARRANTY, to the extent permitted by law. Type "show copying" >>> and "show warranty" for details. >>> This GDB was configured as "x86_64-redhat-linux-gnu". >>> For bug reporting instructions, please see: >>> <http://www.gnu.org/software/gdb/bugs/>... >>> Reading symbols from /local/misc/mail/dovecot-32/libexec/dovecot/pop3-login...done. >>> [New LWP 15894] >>> Core was generated by `dovecot-test/pop3-login'. >>> Program terminated with signal 6, Aborted. >>> #0 0x00007ff0bd9cf1d7 in raise () from /lib64/libc.so.6 Missing >>> separate debuginfos, use: debuginfo-install >>> glibc-2.17-157.el7_3.1.x86_64 >>> (gdb) bt full >>> #0 0x00007ff0bd9cf1d7 in raise () from /lib64/libc.so.6 No symbol >>> table info available. >>> #1 0x00007ff0bd9d08c8 in abort () from /lib64/libc.so.6 No symbol >>> table info available. >>> #2 0x00007ff0bd3c0f2f in engine_unlocked_finish (e=0x1c51c60, unlock_for_handlers=1) at eng_init.c:115 >>> to_return = 1 >>> #3 0x00007ff0bd3c1064 in ENGINE_finish (e=0x1c51c60) at eng_init.c:150 >>> to_return = 1 >>> #4 0x00007ff0be0f9300 in ssl_proxy_deinit () from >>> /local/nextmail/dovecot/lib64/dovecot/libdovecot-login.so.0 >>> No symbol table info available. >>> #5 0x00007ff0be0f4472 in main_deinit () from >>> /local/nextmail/dovecot/lib64/dovecot/libdovecot-login.so.0 >>> No symbol table info available. >>> #6 0x00007ff0be0f479f in login_binary_run () from >>> /local/nextmail/dovecot/lib64/dovecot/libdovecot-login.so.0 >>> No symbol table info available. >>> #7 0x00000000004032da in main (argc=1, argv=0x7ffe3059f3f8) at >>> client.c:356 No locals. >>> >>> >>> >>> -----Original Message----- >>> From: Aki Tuomi [mailto:aki.tuomi@dovecot.fi] >>> Sent: 8. september 2017 14:08 >>> To: Eik?s Arvid; dovecot(a)dovecot.org >>> Subject: Re: pop3-login core dump when using TLSSTART on version >>> dovecot-2.2.32 (OPEN) >>> >>> I assume you mean STARTTLS. Can you provide gdb /path/to/bin /path/to/core and provide output of bt full? >>> >>> Aki >>> >>> >>> On 08.09.2017 15:01, Arvid.Eikas(a)telenor.com wrote: >>>> Hi, >>>> >>>> Pop3-login are CORE-dumping when I log on with TLSSTART, I believe the same will happen with imap-logon to, but I have not tested it yet. >>>> The TLS session is coming up and it works fine until I log off, then it's core dump. Open sslvesrion is openssl-1.0.2k. >>>> We ran dovecot-2.2.27 before we upgraded to dovecote-2.2.32, and >>>> that seems to work fine. (not core dumping) >>>> >>>> >>>> Arvid >>>> >>>> >>>> LOG >>>> Sep 05 14:27:34 pop3-login: Debug: SSL: elliptic curve secp384r1 >>>> will be used for ECDH and ECDHE key exchanges Sep 05 14:30:30 pop3-login: >>>> Debug: SSL: elliptic curve secp384r1 will be used for ECDH and >>>> ECDHE key exchanges Sep 05 14:30:30 pop3-login: Debug: SSL: >>>> elliptic curve >>>> secp384r1 will be used for ECDH and ECDHE key exchanges Sep 05 >>>> 14:30:42 pop3-login: Debug: SSL: elliptic curve secp384r1 will be >>>> used for ECDH and ECDHE key exchanges Sep 05 14:30:42 pop3-login: Debug: >>>> SSL: elliptic curve secp384r1 will be used for ECDH and ECDHE key >>>> exchanges Sep 05 14:30:50 pop3-login: Info: Login: user=<tstrand>, >>>> method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=18361, secured, >>>> session=<65m8ZXBYtpN/AAAB> Sep 05 14:30:50 pop3-login: Error: >>>> ENGINE_finish, bad functional reference count Sep 05 14:30:50 >>>> pop3-login: Fatal: master: service(pop3-login): child 18359 killed >>>> with signal 6 (core dumped) >>>> >>>> >>>> >>>> >>>> >>>> >>>> From ./crypto/engine/eng_init.c >>>> >>>> ......... >>>> int engine_unlocked_finish(ENGINE *e, int unlock_for_handlers) { >>>> int to_return = 1; >>>> >>>> /* >>>> * Reduce the functional reference count here so if it's the terminating >>>> * case, we can release the lock safely and call the finish() handler >>>> * without risk of a race. We get a race if we leave the count until >>>> * after and something else is calling "finish" at the same time - >>>> * there's a chance that both threads will together take the count from 2 >>>> * to 0 without either calling finish(). >>>> */ >>>> e->funct_ref--; >>>> engine_ref_debug(e, 1, -1); >>>> if ((e->funct_ref == 0) && e->finish) { >>>> if (unlock_for_handlers) >>>> CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE); >>>> to_return = e->finish(e); >>>> if (unlock_for_handlers) >>>> CRYPTO_w_lock(CRYPTO_LOCK_ENGINE); >>>> if (!to_return) >>>> return 0; >>>> } >>>> #ifdef REF_CHECK >>>> if (e->funct_ref < 0) { >>>> fprintf(stderr, "ENGINE_finish, bad functional reference count\n"); >>>> abort(); >>>> >>>> ......... >>>> >>>> /* The API (locked) version of "finish" */ int ENGINE_finish(ENGINE >>>> *e) { >>>> int to_return = 1; >>>> >>>> if (e == NULL) { >>>> ENGINEerr(ENGINE_F_ENGINE_FINISH, ERR_R_PASSED_NULL_PARAMETER); >>>> return 0; >>>> } >>>> CRYPTO_w_lock(CRYPTO_LOCK_ENGINE); >>>> to_return = engine_unlocked_finish(e, 1); >>>> CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE); >>>> if (!to_return) { >>>> ENGINEerr(ENGINE_F_ENGINE_FINISH, ENGINE_R_FINISH_FAILED); >>>> return 0; >>>> } >>>> return to_return; >>>> } > > > ------------------------------ > > Message: 2 > Date: Mon, 11 Sep 2017 14:48:47 +0300 (MSK) > From: Evgeniy Korneechev <ekorneechev(a)altlinux.org> > To: Aki Tuomi <aki.tuomi(a)dovecot.fi> > Cc: dovecot <dovecot(a)dovecot.org> > Subject: Re: Per-user quota (passwd) > Message-ID: > <2046000051.747964.1505130527842.JavaMail.zimbra(a)remotesystems.ru> > Content-Type: text/plain; charset=utf-8 > > Hi. > But there is one problem... > > protocol lda { > mail_plugins = " quota autocreate sieve quota" > plugin { > quota = dict:user::file:/var/vmail/glu_vrem/%u/.quotausage > } > } > protocol imap { > mail_plugins = " quota autocreate autocreate imap_quota" > plugin { > autocreate = INBOX > autocreate2 = Sent > autocreate3 = Trash > autocreate4 = Drafts > autocreate5 = Junk > autosubscribe = INBOX > autosubscribe2 = Sent > autosubscribe3 = Trash > autosubscribe4 = Drafts > autosubscribe5 = Junk > quota = dict:user::file:/var/vmail/glu_vrem/%u/.quotausage > } > } > >> Users with non-standard quota in passwd-file: >>>>>>>> administrator:*:95400500:95400513:Administrator:/home/DOM/admin >>>>>>>> i strator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >>>>>>>> administrator@email.dom:*:95400500:95400513:Administrator:/home >>>>>>>> / DOM/administrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >> Others from passwd. > > > Files ".quotausage" are created in different directories: > /var/vmail/glu_vrem/administrator\DOM/.quotausage > /var/vmail/glu_vrem/administrator(a)email.dom/.quotausage > And must in the folder "/var/vmail/glu_vrem/administrator" > > How fix it? > > > ----- ???????? ????????? ----- >> ??: "Evgeniy Korneechev" <ekorneechev(a)altlinux.org> >> ????: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> >> ?????: "dovecot" <dovecot(a)dovecot.org> >> ????????????: ???????, 30 ???? 2017 ? 10:39:16 >> ????: Re: Per-user quota (passwd) >> Our solution: >> userdb { >> args = /etc/imap.passwd >> driver = passwd-file >> override_fields = home=/var/vmail/glu_vrem/%u } userdb { driver = >> passwd override_fields = home=/var/vmail/glu_vrem/%u } >> >> Users with non-standard quota in passwd-file: >>>>>>>> administrator:*:95400500:95400513:Administrator:/home/DOM/admin >>>>>>>> i strator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >>>>>>>> administrator@email.dom:*:95400500:95400513:Administrator:/home >>>>>>>> / DOM/administrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >> Others from passwd. >> >> Its works! Thanks. >> >> >> ----- ???????? ????????? ----- >>> ??: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> >>> ????: "dovecot" <dovecot(a)dovecot.org> >>> ????????????: ???????, 29 ???? 2017 ? 14:40:44 >>> ????: Re: Per-user quota (passwd) >>> Oh you have multiple db's, I missed that. >>> >>> Remove auth_username_format, and instead >>> >>> userdb { >>> args = /etc/imap.passwd username_format=%Ln driver = passwd-file >>> override_fields = home=/var/vmail/glu_vrem/%u } >>> >>> On 29.06.2017 14:35, Evgeniy Korneechev wrote: >>>> with auth_username_format = %Ln: >>>> >>>> Jun 28 14:43:41 auth: Debug: master in: USER 1 iivanov.ia(a)example.com >>>> service=lda >>>> Jun 28 14:43:41 auth-worker(18369): Debug: passwd(iivanov.ia): >>>> lookup Jun 28 14:43:41 auth-worker(18369): Info: passwd(iivanov.ia): >>>> unknown user - trying the next userdb Jun 28 14:43:41 >>>> auth-worker(18369): Debug: sql(iivanov.ia): SELECT email as user, >>>> maildir as home, CONCAT('maildir:', maildir, '/Maildir') as mail, >>>> uid, gid, \ >>>> CONCAT('*:storage=', quota, 'B') AS quota_rule, CONCAT(maildir, '/.sieve') as >>>> sieve FROM mail_user WHERE (login = 'iivanov.ia' OR email = >>>> 'iivanov.ia') Jun 28 14:43:41 auth-worker(18369): Info: >>>> sql(iivanov.ia): unknown user >>>> >>>> Maybe %Lu? >>>> >>>> ----- ???????? ????????? ----- >>>>> ??: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> >>>>> ????: "dovecot" <dovecot(a)dovecot.org> >>>>> ????????????: ???????, 29 ???? 2017 ? 14:10:07 >>>>> ????: Re: Per-user quota (passwd) >>>>> Yes. >>>>> >>>>> Aki >>>>> >>>>> On 29.06.2017 14:07, Evgeniy Korneechev wrote: >>>>>> And if such a user: >>>>>> email (from AD) = ivanov.ia(a)example.com login (from AD), %n = >>>>>> iivanov %d = DOM %u = iivanov@DOM >>>>>> >>>>>> ? >>>>>> >>>>>> ----- ???????? ????????? ----- >>>>>>> ??: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> >>>>>>> ????: "dovecot" <dovecot(a)dovecot.org> >>>>>>> ????????????: ???????, 29 ???? 2017 ? 13:59:05 >>>>>>> ????: Re: Per-user quota (passwd) or use, as I indicated before, >>>>>>> auth_username_format = %Ln >>>>>>> >>>>>>> Aki >>>>>>> >>>>>>> >>>>>>> On 29.06.2017 13:58, Evgeniy Korneechev wrote: >>>>>>>> Hi! >>>>>>>> workaround: >>>>>>>> administrator:*:95400500:95400513:Administrator:/home/DOM/admin >>>>>>>> i strator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >>>>>>>> administrator@email.dom:*:95400500:95400513:Administrator:/home >>>>>>>> / DOM/administrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >>>>>>>> >>>>>>>> But this is not a solution for 1000 users ... >>>>>>>> Maybe is there extra field "userdb_mail=administrator(a)email.dom" >>>>>>>> for email to passwd-file? >>>>>>>> >>>>>>>> ----- ???????? ????????? ----- >>>>>>>>> ??: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> >>>>>>>>> ????: "dovecot" <dovecot(a)dovecot.org> >>>>>>>>> ????????????: ?????, 28 ???? 2017 ? 12:40:48 >>>>>>>>> ????: Re: Per-user quota (passwd) On 28.06.2017 12:36, Aki >>>>>>>>> Tuomi wrote: >>>>>>>>>> On 28.06.2017 12:25, Evgeniy Korneechev wrote: >>>>>>>>>>> Hello! >>>>>>>>>>> We have passwd=pam, userdb=passwd. >>>>>>>>>>> passdb { >>>>>>>>>>> driver = pam #server was entered domain Active Directory } >>>>>>>>>>> userdb { >>>>>>>>>>> driver = passwd >>>>>>>>>>> override_fields = home=/var/vmail/glu_vrem/%u } >>>>>>>>>>> >>>>>>>>>>> How can i use per-user quota? Only passwd-file? >>>>>>>>>>> >>>>>>>>>>> I tried: >>>>>>>>>>> userdb { >>>>>>>>>>> args = /etc/imap.passwd >>>>>>>>>>> driver = passwd-file >>>>>>>>>>> override_fields = home=/var/vmail/glu_vrem/%u } >>>>>>>>>>> /etc/imap.passwd: >>>>>>>>>>> administrator:*:95400500:95400513:Administrator:/home/DOM/ad >>>>>>>>>>> m inistrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>>>>> >>>>>>>>>>> Authentication and quota - now OK. But doesn't work sending >>>>>>>>>>> and receiving mail... >>>>>>>>>>> postfix say 'Unknown user'... >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Turn on auth_debug and auth_verbose and see what it says. >>>>>>>>>>> >>>>>>>>>>> Aki >>>>>>>>> Also you can set auth_username_format = %Ln to force usernames >>>>>>>>> into lowercase without domain. >>>>>>>>> >>>>>>>>> Aki >> -- >> WBR, Korneechev Evgeniy >> BaseALT/ALTLinux Team > -- > WBR, Korneechev Evgeniy > BaseALT/ALTLinux Team > > > ------------------------------ > > Message: 3 > Date: Mon, 11 Sep 2017 14:51:13 +0300 > From: Aki Tuomi <aki.tuomi(a)dovecot.fi> > To: dovecot(a)dovecot.org > Subject: Re: Per-user quota (passwd) > Message-ID: <7e86447f-10e6-51a3-ce8a-3c4c8261bac1(a)dovecot.fi> > Content-Type: text/plain; charset=utf-8 > > Hi! > Just so you know, autocreate/autosubscribe is deprecated, you should > use > > namespace { > mailbox INBOX { > auto = subscribe > } > } > > can you run > > doveadm user administrator(a)email.dom > > to verify that mail_home gets set correctly? > > Aki > > On 11.09.2017 14:48, Evgeniy Korneechev wrote: >> Hi. >> But there is one problem... >> >> protocol lda { >> mail_plugins = " quota autocreate sieve quota" >> plugin { >> quota = dict:user::file:/var/vmail/glu_vrem/%u/.quotausage >> } >> } >> protocol imap { >> mail_plugins = " quota autocreate autocreate imap_quota" >> plugin { >> autocreate = INBOX >> autocreate2 = Sent >> autocreate3 = Trash >> autocreate4 = Drafts >> autocreate5 = Junk >> autosubscribe = INBOX >> autosubscribe2 = Sent >> autosubscribe3 = Trash >> autosubscribe4 = Drafts >> autosubscribe5 = Junk >> quota = dict:user::file:/var/vmail/glu_vrem/%u/.quotausage >> } >> } >> >>> Users with non-standard quota in passwd-file: >>>>>>>>> administrator:*:95400500:95400513:Administrator:/home/DOM/admi >>>>>>>>> nistrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >>>>>>>>> administrator@email.dom:*:95400500:95400513:Administrator:/hom >>>>>>>>> e/DOM/administrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >>> Others from passwd. >> >> Files ".quotausage" are created in different directories: >> /var/vmail/glu_vrem/administrator\DOM/.quotausage >> /var/vmail/glu_vrem/administrator(a)email.dom/.quotausage >> And must in the folder "/var/vmail/glu_vrem/administrator" >> >> How fix it? >> >> >> ----- ???????? ????????? ----- >>> ??: "Evgeniy Korneechev" <ekorneechev(a)altlinux.org> >>> ????: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> >>> ?????: "dovecot" <dovecot(a)dovecot.org> >>> ????????????: ???????, 30 ???? 2017 ? 10:39:16 >>> ????: Re: Per-user quota (passwd) >>> Our solution: >>> userdb { >>> args = /etc/imap.passwd >>> driver = passwd-file >>> override_fields = home=/var/vmail/glu_vrem/%u } userdb { driver = >>> passwd override_fields = home=/var/vmail/glu_vrem/%u } >>> >>> Users with non-standard quota in passwd-file: >>>>>>>>> administrator:*:95400500:95400513:Administrator:/home/DOM/admi >>>>>>>>> nistrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >>>>>>>>> administrator@email.dom:*:95400500:95400513:Administrator:/hom >>>>>>>>> e/DOM/administrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >>> Others from passwd. >>> >>> Its works! Thanks. >>> >>> >>> ----- ???????? ????????? ----- >>>> ??: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> >>>> ????: "dovecot" <dovecot(a)dovecot.org> >>>> ????????????: ???????, 29 ???? 2017 ? 14:40:44 >>>> ????: Re: Per-user quota (passwd) >>>> Oh you have multiple db's, I missed that. >>>> >>>> Remove auth_username_format, and instead >>>> >>>> userdb { >>>> args = /etc/imap.passwd username_format=%Ln driver = passwd-file >>>> override_fields = home=/var/vmail/glu_vrem/%u } >>>> >>>> On 29.06.2017 14:35, Evgeniy Korneechev wrote: >>>>> with auth_username_format = %Ln: >>>>> >>>>> Jun 28 14:43:41 auth: Debug: master in: USER 1 iivanov.ia(a)example.com >>>>> service=lda >>>>> Jun 28 14:43:41 auth-worker(18369): Debug: passwd(iivanov.ia): >>>>> lookup Jun 28 14:43:41 auth-worker(18369): Info: >>>>> passwd(iivanov.ia): unknown user - trying the next userdb Jun 28 >>>>> 14:43:41 auth-worker(18369): Debug: sql(iivanov.ia): SELECT email >>>>> as user, maildir as home, CONCAT('maildir:', maildir, '/Maildir') >>>>> as mail, uid, gid, \ >>>>> CONCAT('*:storage=', quota, 'B') AS quota_rule, CONCAT(maildir, '/.sieve') as >>>>> sieve FROM mail_user WHERE (login = 'iivanov.ia' OR email = >>>>> 'iivanov.ia') Jun 28 14:43:41 auth-worker(18369): Info: >>>>> sql(iivanov.ia): unknown user >>>>> >>>>> Maybe %Lu? >>>>> >>>>> ----- ???????? ????????? ----- >>>>>> ??: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> >>>>>> ????: "dovecot" <dovecot(a)dovecot.org> >>>>>> ????????????: ???????, 29 ???? 2017 ? 14:10:07 >>>>>> ????: Re: Per-user quota (passwd) Yes. >>>>>> >>>>>> Aki >>>>>> >>>>>> On 29.06.2017 14:07, Evgeniy Korneechev wrote: >>>>>>> And if such a user: >>>>>>> email (from AD) = ivanov.ia(a)example.com login (from AD), %n = >>>>>>> iivanov %d = DOM %u = iivanov@DOM >>>>>>> >>>>>>> ? >>>>>>> >>>>>>> ----- ???????? ????????? ----- >>>>>>>> ??: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> >>>>>>>> ????: "dovecot" <dovecot(a)dovecot.org> >>>>>>>> ????????????: ???????, 29 ???? 2017 ? 13:59:05 >>>>>>>> ????: Re: Per-user quota (passwd) or use, as I indicated >>>>>>>> before, auth_username_format = %Ln >>>>>>>> >>>>>>>> Aki >>>>>>>> >>>>>>>> >>>>>>>> On 29.06.2017 13:58, Evgeniy Korneechev wrote: >>>>>>>>> Hi! >>>>>>>>> workaround: >>>>>>>>> administrator:*:95400500:95400513:Administrator:/home/DOM/admi >>>>>>>>> nistrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >>>>>>>>> administrator@email.dom:*:95400500:95400513:Administrator:/hom >>>>>>>>> e/DOM/administrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >>>>>>>>> >>>>>>>>> But this is not a solution for 1000 users ... >>>>>>>>> Maybe is there extra field >>>>>>>>> "userdb_mail=administrator(a)email.dom" for email to passwd-file? >>>>>>>>> >>>>>>>>> ----- ???????? ????????? ----- >>>>>>>>>> ??: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> >>>>>>>>>> ????: "dovecot" <dovecot(a)dovecot.org> >>>>>>>>>> ????????????: ?????, 28 ???? 2017 ? 12:40:48 >>>>>>>>>> ????: Re: Per-user quota (passwd) On 28.06.2017 12:36, Aki >>>>>>>>>> Tuomi wrote: >>>>>>>>>>> On 28.06.2017 12:25, Evgeniy Korneechev wrote: >>>>>>>>>>>> Hello! >>>>>>>>>>>> We have passwd=pam, userdb=passwd. >>>>>>>>>>>> passdb { >>>>>>>>>>>> driver = pam #server was entered domain Active Directory >>>>>>>>>>>> } userdb { >>>>>>>>>>>> driver = passwd >>>>>>>>>>>> override_fields = home=/var/vmail/glu_vrem/%u } >>>>>>>>>>>> >>>>>>>>>>>> How can i use per-user quota? Only passwd-file? >>>>>>>>>>>> >>>>>>>>>>>> I tried: >>>>>>>>>>>> userdb { >>>>>>>>>>>> args = /etc/imap.passwd >>>>>>>>>>>> driver = passwd-file >>>>>>>>>>>> override_fields = home=/var/vmail/glu_vrem/%u } >>>>>>>>>>>> /etc/imap.passwd: >>>>>>>>>>>> administrator:*:95400500:95400513:Administrator:/home/DOM/a >>>>>>>>>>>> dministrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>>>>>> >>>>>>>>>>>> Authentication and quota - now OK. But doesn't work sending >>>>>>>>>>>> and receiving mail... >>>>>>>>>>>> postfix say 'Unknown user'... >>>>>>>>>>>> >>>>>>>>>>>> >>>>>>>>>>>> Turn on auth_debug and auth_verbose and see what it says. >>>>>>>>>>>> >>>>>>>>>>>> Aki >>>>>>>>>> Also you can set auth_username_format = %Ln to force >>>>>>>>>> usernames into lowercase without domain. >>>>>>>>>> >>>>>>>>>> Aki >>> -- >>> WBR, Korneechev Evgeniy >>> BaseALT/ALTLinux Team > > > ------------------------------ > > Message: 4 > Date: Mon, 11 Sep 2017 14:56:28 +0200 > From: "Nagy, Attila" <bra(a)fsn.hu> > To: Aki Tuomi <aki.tuomi(a)dovecot.fi>, dovecot(a)dovecot.org > Subject: Re: Is it possible to disable pipelining in imapc? > Message-ID: <a6ced659-fa75-60c9-01f7-bfb36e826466(a)fsn.hu> > Content-Type: text/plain; charset=utf-8; format=flowed > > On 09/11/2017 12:12 PM, Aki Tuomi wrote: >> Is there some reason you can't use normal proxy instead of imap backend? >> That is,return proxy, host=imap_backend, port=1430? There seems to be >> no pipeline setting currently for imapc in v2.2. >> > Yes, because it's a dumb IMAP server, which doesn't implement a lot of > things, like SEARCH, FETCH BODYSTRUCTURE and similar. > Dovecot is used as a smart proxy, which makes it possible to use it as > a fully featured IMAP server. > > > ------------------------------ > > Subject: Digest Footer > > _______________________________________________ > dovecot mailing list > dovecot(a)dovecot.org > https://dovecot.org/mailman/listinfo/dovecot > > ------------------------------ > > End of dovecot Digest, Vol 173, Issue 28 > ****************************************

2 1

RE: dovecot Digest, Vol 173, Issue 28 (INTERNAL)
by Arvid.Eikas＠telenor.com 12 Sep '17

12 Sep '17

Hi, It is quite easy. I use a client (thunderbird or windows live mail) set it up to use starttls on standard port 110. Logon and just do a list on the mailbox. The fatal error occurred when I logoff. Arvid -----Original Message----- From: dovecot [mailto:dovecot-bounces@dovecot.org] On Behalf Of dovecot-request(a)dovecot.org Sent: 11. september 2017 14:57 To: dovecot(a)dovecot.org Subject: dovecot Digest, Vol 173, Issue 28 Send dovecot mailing list submissions to dovecot(a)dovecot.org To subscribe or unsubscribe via the World Wide Web, visit https://dovecot.org/mailman/listinfo/dovecot or, via email, send a message with subject or body 'help' to dovecot-request(a)dovecot.org You can reach the person managing the list at dovecot-owner(a)dovecot.org When replying, please edit your Subject line so it is more specific than "Re: Contents of dovecot digest..." Today's Topics: 1. Re: pop3-login core dump when using TLSSTART on version dovecot-2.2.32 (INTERNAL) (Aki Tuomi) 2. Re: Per-user quota (passwd) (Evgeniy Korneechev) 3. Re: Per-user quota (passwd) (Aki Tuomi) 4. Re: Is it possible to disable pipelining in imapc? (Nagy, Attila) ---------------------------------------------------------------------- Message: 1 Date: Mon, 11 Sep 2017 13:57:19 +0300 From: Aki Tuomi <aki.tuomi(a)dovecot.fi> To: dovecot(a)dovecot.org Subject: Re: pop3-login core dump when using TLSSTART on version dovecot-2.2.32 (INTERNAL) Message-ID: <cd450054-53c4-2f84-eba7-7ce602c26892(a)dovecot.fi> Content-Type: text/plain; charset=utf-8 Can you outline the exact steps you perform to get this? Aki On 11.09.2017 13:42, Arvid.Eikas(a)telenor.com wrote: > Hi, > > I switched back to 2.2.27 with the same config that I am using for 2.2.32 and it work fine. > > Sep 11 11:49:37 imap-login: Info: Login: user=<viboge>, method=PLAIN, > rip=88.89.118.45, lip=148.123.160.116, mpid=18709, TLS, > session=<v7o22OZYrsdYWXYt> Sep 11 11:49:40 imap(mailuser) Session-ID > v7o22OZYrsdYWXYt RemoteIP 88.89.118.45 Maildir > /var/nextmail/nfs2.flex14/49/79/841 Info: Logged out in=4518 > out=273720 deleted 0 expunged 0 trashed 0 Sep 11 11:49:40 imap-login: > Debug: SSL alert: close notify [88.89.118.45] > > How could I proceed? Any clue? It is quite annoying to see this entry in the log for each session. > > Arvid > > > > > -----Original Message----- > From: Aki Tuomi [mailto:aki.tuomi@dovecot.fi] > Sent: 11. september 2017 09:18 > To: Eik?s Arvid; dovecot(a)dovecot.org > Subject: Re: pop3-login core dump when using TLSSTART on version > dovecot-2.2.32 (INTERNAL) > > Hi! > > I tried to reproduce this problem with dovecot-2.2.32 and OpenSSL 1.0.1k and was not able to. I enabled -DREF_CHECK on OpenSSL, but to no avail, the process did not crash. Is there something else you've done? > > Aki > > > On 11.09.2017 08:07, Arvid.Eikas(a)telenor.com wrote: >> Hi, >> >> Here is the gdb output. >> >> Arvid >> >> GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-94.el7 Copyright (C) >> 2013 Free Software Foundation, Inc. >> License GPLv3+: GNU GPL version 3 or later >> <http://gnu.org/licenses/gpl.html> >> This is free software: you are free to change and redistribute it. >> There is NO WARRANTY, to the extent permitted by law. Type "show copying" >> and "show warranty" for details. >> This GDB was configured as "x86_64-redhat-linux-gnu". >> For bug reporting instructions, please see: >> <http://www.gnu.org/software/gdb/bugs/>... >> Reading symbols from /local/misc/mail/dovecot-32/libexec/dovecot/pop3-login...done. >> [New LWP 15894] >> Core was generated by `dovecot-test/pop3-login'. >> Program terminated with signal 6, Aborted. >> #0 0x00007ff0bd9cf1d7 in raise () from /lib64/libc.so.6 Missing >> separate debuginfos, use: debuginfo-install >> glibc-2.17-157.el7_3.1.x86_64 >> (gdb) bt full >> #0 0x00007ff0bd9cf1d7 in raise () from /lib64/libc.so.6 No symbol >> table info available. >> #1 0x00007ff0bd9d08c8 in abort () from /lib64/libc.so.6 No symbol >> table info available. >> #2 0x00007ff0bd3c0f2f in engine_unlocked_finish (e=0x1c51c60, unlock_for_handlers=1) at eng_init.c:115 >> to_return = 1 >> #3 0x00007ff0bd3c1064 in ENGINE_finish (e=0x1c51c60) at eng_init.c:150 >> to_return = 1 >> #4 0x00007ff0be0f9300 in ssl_proxy_deinit () from >> /local/nextmail/dovecot/lib64/dovecot/libdovecot-login.so.0 >> No symbol table info available. >> #5 0x00007ff0be0f4472 in main_deinit () from >> /local/nextmail/dovecot/lib64/dovecot/libdovecot-login.so.0 >> No symbol table info available. >> #6 0x00007ff0be0f479f in login_binary_run () from >> /local/nextmail/dovecot/lib64/dovecot/libdovecot-login.so.0 >> No symbol table info available. >> #7 0x00000000004032da in main (argc=1, argv=0x7ffe3059f3f8) at >> client.c:356 No locals. >> >> >> >> -----Original Message----- >> From: Aki Tuomi [mailto:aki.tuomi@dovecot.fi] >> Sent: 8. september 2017 14:08 >> To: Eik?s Arvid; dovecot(a)dovecot.org >> Subject: Re: pop3-login core dump when using TLSSTART on version >> dovecot-2.2.32 (OPEN) >> >> I assume you mean STARTTLS. Can you provide gdb /path/to/bin /path/to/core and provide output of bt full? >> >> Aki >> >> >> On 08.09.2017 15:01, Arvid.Eikas(a)telenor.com wrote: >>> Hi, >>> >>> Pop3-login are CORE-dumping when I log on with TLSSTART, I believe the same will happen with imap-logon to, but I have not tested it yet. >>> The TLS session is coming up and it works fine until I log off, then it's core dump. Open sslvesrion is openssl-1.0.2k. >>> We ran dovecot-2.2.27 before we upgraded to dovecote-2.2.32, and >>> that seems to work fine. (not core dumping) >>> >>> >>> Arvid >>> >>> >>> LOG >>> Sep 05 14:27:34 pop3-login: Debug: SSL: elliptic curve secp384r1 >>> will be used for ECDH and ECDHE key exchanges Sep 05 14:30:30 pop3-login: >>> Debug: SSL: elliptic curve secp384r1 will be used for ECDH and ECDHE >>> key exchanges Sep 05 14:30:30 pop3-login: Debug: SSL: elliptic curve >>> secp384r1 will be used for ECDH and ECDHE key exchanges Sep 05 >>> 14:30:42 pop3-login: Debug: SSL: elliptic curve secp384r1 will be >>> used for ECDH and ECDHE key exchanges Sep 05 14:30:42 pop3-login: Debug: >>> SSL: elliptic curve secp384r1 will be used for ECDH and ECDHE key >>> exchanges Sep 05 14:30:50 pop3-login: Info: Login: user=<tstrand>, >>> method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=18361, secured, >>> session=<65m8ZXBYtpN/AAAB> Sep 05 14:30:50 pop3-login: Error: >>> ENGINE_finish, bad functional reference count Sep 05 14:30:50 >>> pop3-login: Fatal: master: service(pop3-login): child 18359 killed >>> with signal 6 (core dumped) >>> >>> >>> >>> >>> >>> >>> From ./crypto/engine/eng_init.c >>> >>> ......... >>> int engine_unlocked_finish(ENGINE *e, int unlock_for_handlers) { >>> int to_return = 1; >>> >>> /* >>> * Reduce the functional reference count here so if it's the terminating >>> * case, we can release the lock safely and call the finish() handler >>> * without risk of a race. We get a race if we leave the count until >>> * after and something else is calling "finish" at the same time - >>> * there's a chance that both threads will together take the count from 2 >>> * to 0 without either calling finish(). >>> */ >>> e->funct_ref--; >>> engine_ref_debug(e, 1, -1); >>> if ((e->funct_ref == 0) && e->finish) { >>> if (unlock_for_handlers) >>> CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE); >>> to_return = e->finish(e); >>> if (unlock_for_handlers) >>> CRYPTO_w_lock(CRYPTO_LOCK_ENGINE); >>> if (!to_return) >>> return 0; >>> } >>> #ifdef REF_CHECK >>> if (e->funct_ref < 0) { >>> fprintf(stderr, "ENGINE_finish, bad functional reference count\n"); >>> abort(); >>> >>> ......... >>> >>> /* The API (locked) version of "finish" */ int ENGINE_finish(ENGINE >>> *e) { >>> int to_return = 1; >>> >>> if (e == NULL) { >>> ENGINEerr(ENGINE_F_ENGINE_FINISH, ERR_R_PASSED_NULL_PARAMETER); >>> return 0; >>> } >>> CRYPTO_w_lock(CRYPTO_LOCK_ENGINE); >>> to_return = engine_unlocked_finish(e, 1); >>> CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE); >>> if (!to_return) { >>> ENGINEerr(ENGINE_F_ENGINE_FINISH, ENGINE_R_FINISH_FAILED); >>> return 0; >>> } >>> return to_return; >>> } > ------------------------------ Message: 2 Date: Mon, 11 Sep 2017 14:48:47 +0300 (MSK) From: Evgeniy Korneechev <ekorneechev(a)altlinux.org> To: Aki Tuomi <aki.tuomi(a)dovecot.fi> Cc: dovecot <dovecot(a)dovecot.org> Subject: Re: Per-user quota (passwd) Message-ID: <2046000051.747964.1505130527842.JavaMail.zimbra(a)remotesystems.ru> Content-Type: text/plain; charset=utf-8 Hi. But there is one problem... protocol lda { mail_plugins = " quota autocreate sieve quota" plugin { quota = dict:user::file:/var/vmail/glu_vrem/%u/.quotausage } } protocol imap { mail_plugins = " quota autocreate autocreate imap_quota" plugin { autocreate = INBOX autocreate2 = Sent autocreate3 = Trash autocreate4 = Drafts autocreate5 = Junk autosubscribe = INBOX autosubscribe2 = Sent autosubscribe3 = Trash autosubscribe4 = Drafts autosubscribe5 = Junk quota = dict:user::file:/var/vmail/glu_vrem/%u/.quotausage } } > Users with non-standard quota in passwd-file: >>>>>>> administrator:*:95400500:95400513:Administrator:/home/DOM/admini >>>>>>> strator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >>>>>>> administrator@email.dom:*:95400500:95400513:Administrator:/home/ >>>>>>> DOM/administrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir > > Others from passwd. Files ".quotausage" are created in different directories: /var/vmail/glu_vrem/administrator\DOM/.quotausage /var/vmail/glu_vrem/administrator(a)email.dom/.quotausage And must in the folder "/var/vmail/glu_vrem/administrator" How fix it? ----- ???????? ????????? ----- > ??: "Evgeniy Korneechev" <ekorneechev(a)altlinux.org> > ????: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> > ?????: "dovecot" <dovecot(a)dovecot.org> > ????????????: ???????, 30 ???? 2017 ? 10:39:16 > ????: Re: Per-user quota (passwd) > Our solution: > userdb { > args = /etc/imap.passwd > driver = passwd-file > override_fields = home=/var/vmail/glu_vrem/%u } userdb { driver = > passwd override_fields = home=/var/vmail/glu_vrem/%u } > > Users with non-standard quota in passwd-file: >>>>>>> administrator:*:95400500:95400513:Administrator:/home/DOM/admini >>>>>>> strator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >>>>>>> administrator@email.dom:*:95400500:95400513:Administrator:/home/ >>>>>>> DOM/administrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir > > Others from passwd. > > Its works! Thanks. > > > ----- ???????? ????????? ----- >> ??: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> >> ????: "dovecot" <dovecot(a)dovecot.org> >> ????????????: ???????, 29 ???? 2017 ? 14:40:44 >> ????: Re: Per-user quota (passwd) > >> Oh you have multiple db's, I missed that. >> >> Remove auth_username_format, and instead >> >> userdb { >> args = /etc/imap.passwd username_format=%Ln driver = passwd-file >> override_fields = home=/var/vmail/glu_vrem/%u } >> >> On 29.06.2017 14:35, Evgeniy Korneechev wrote: >>> with auth_username_format = %Ln: >>> >>> Jun 28 14:43:41 auth: Debug: master in: USER 1 iivanov.ia(a)example.com >>> service=lda >>> Jun 28 14:43:41 auth-worker(18369): Debug: passwd(iivanov.ia): >>> lookup Jun 28 14:43:41 auth-worker(18369): Info: passwd(iivanov.ia): >>> unknown user - trying the next userdb Jun 28 14:43:41 >>> auth-worker(18369): Debug: sql(iivanov.ia): SELECT email as user, >>> maildir as home, CONCAT('maildir:', maildir, '/Maildir') as mail, >>> uid, gid, \ >>> CONCAT('*:storage=', quota, 'B') AS quota_rule, CONCAT(maildir, '/.sieve') as >>> sieve FROM mail_user WHERE (login = 'iivanov.ia' OR email = >>> 'iivanov.ia') Jun 28 14:43:41 auth-worker(18369): Info: >>> sql(iivanov.ia): unknown user >>> >>> Maybe %Lu? >>> >>> ----- ???????? ????????? ----- >>>> ??: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> >>>> ????: "dovecot" <dovecot(a)dovecot.org> >>>> ????????????: ???????, 29 ???? 2017 ? 14:10:07 >>>> ????: Re: Per-user quota (passwd) >>>> Yes. >>>> >>>> Aki >>>> >>>> On 29.06.2017 14:07, Evgeniy Korneechev wrote: >>>>> And if such a user: >>>>> email (from AD) = ivanov.ia(a)example.com login (from AD), %n = >>>>> iivanov %d = DOM %u = iivanov@DOM >>>>> >>>>> ? >>>>> >>>>> ----- ???????? ????????? ----- >>>>>> ??: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> >>>>>> ????: "dovecot" <dovecot(a)dovecot.org> >>>>>> ????????????: ???????, 29 ???? 2017 ? 13:59:05 >>>>>> ????: Re: Per-user quota (passwd) or use, as I indicated before, >>>>>> auth_username_format = %Ln >>>>>> >>>>>> Aki >>>>>> >>>>>> >>>>>> On 29.06.2017 13:58, Evgeniy Korneechev wrote: >>>>>>> Hi! >>>>>>> workaround: >>>>>>> administrator:*:95400500:95400513:Administrator:/home/DOM/admini >>>>>>> strator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >>>>>>> administrator@email.dom:*:95400500:95400513:Administrator:/home/ >>>>>>> DOM/administrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >>>>>>> >>>>>>> But this is not a solution for 1000 users ... >>>>>>> Maybe is there extra field "userdb_mail=administrator(a)email.dom" >>>>>>> for email to passwd-file? >>>>>>> >>>>>>> ----- ???????? ????????? ----- >>>>>>>> ??: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> >>>>>>>> ????: "dovecot" <dovecot(a)dovecot.org> >>>>>>>> ????????????: ?????, 28 ???? 2017 ? 12:40:48 >>>>>>>> ????: Re: Per-user quota (passwd) On 28.06.2017 12:36, Aki >>>>>>>> Tuomi wrote: >>>>>>>>> On 28.06.2017 12:25, Evgeniy Korneechev wrote: >>>>>>>>>> Hello! >>>>>>>>>> We have passwd=pam, userdb=passwd. >>>>>>>>>> passdb { >>>>>>>>>> driver = pam #server was entered domain Active Directory } >>>>>>>>>> userdb { >>>>>>>>>> driver = passwd >>>>>>>>>> override_fields = home=/var/vmail/glu_vrem/%u } >>>>>>>>>> >>>>>>>>>> How can i use per-user quota? Only passwd-file? >>>>>>>>>> >>>>>>>>>> I tried: >>>>>>>>>> userdb { >>>>>>>>>> args = /etc/imap.passwd >>>>>>>>>> driver = passwd-file >>>>>>>>>> override_fields = home=/var/vmail/glu_vrem/%u } >>>>>>>>>> /etc/imap.passwd: >>>>>>>>>> administrator:*:95400500:95400513:Administrator:/home/DOM/adm >>>>>>>>>> inistrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>>>> >>>>>>>>>> Authentication and quota - now OK. But doesn't work sending >>>>>>>>>> and receiving mail... >>>>>>>>>> postfix say 'Unknown user'... >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Turn on auth_debug and auth_verbose and see what it says. >>>>>>>>>> >>>>>>>>>> Aki >>>>>>>> Also you can set auth_username_format = %Ln to force usernames >>>>>>>> into lowercase without domain. >>>>>>>> >> >>>>>> Aki > > -- > WBR, Korneechev Evgeniy > BaseALT/ALTLinux Team -- WBR, Korneechev Evgeniy BaseALT/ALTLinux Team ------------------------------ Message: 3 Date: Mon, 11 Sep 2017 14:51:13 +0300 From: Aki Tuomi <aki.tuomi(a)dovecot.fi> To: dovecot(a)dovecot.org Subject: Re: Per-user quota (passwd) Message-ID: <7e86447f-10e6-51a3-ce8a-3c4c8261bac1(a)dovecot.fi> Content-Type: text/plain; charset=utf-8 Hi! Just so you know, autocreate/autosubscribe is deprecated, you should use namespace { mailbox INBOX { auto = subscribe } } can you run doveadm user administrator(a)email.dom to verify that mail_home gets set correctly? Aki On 11.09.2017 14:48, Evgeniy Korneechev wrote: > Hi. > But there is one problem... > > protocol lda { > mail_plugins = " quota autocreate sieve quota" > plugin { > quota = dict:user::file:/var/vmail/glu_vrem/%u/.quotausage > } > } > protocol imap { > mail_plugins = " quota autocreate autocreate imap_quota" > plugin { > autocreate = INBOX > autocreate2 = Sent > autocreate3 = Trash > autocreate4 = Drafts > autocreate5 = Junk > autosubscribe = INBOX > autosubscribe2 = Sent > autosubscribe3 = Trash > autosubscribe4 = Drafts > autosubscribe5 = Junk > quota = dict:user::file:/var/vmail/glu_vrem/%u/.quotausage > } > } > >> Users with non-standard quota in passwd-file: >>>>>>>> administrator:*:95400500:95400513:Administrator:/home/DOM/administrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >>>>>>>> administrator@email.dom:*:95400500:95400513:Administrator:/home/DOM/administrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >> Others from passwd. > > > Files ".quotausage" are created in different directories: > /var/vmail/glu_vrem/administrator\DOM/.quotausage > /var/vmail/glu_vrem/administrator(a)email.dom/.quotausage > And must in the folder "/var/vmail/glu_vrem/administrator" > > How fix it? > > > ----- ???????? ????????? ----- >> ??: "Evgeniy Korneechev" <ekorneechev(a)altlinux.org> >> ????: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> >> ?????: "dovecot" <dovecot(a)dovecot.org> >> ????????????: ???????, 30 ???? 2017 ? 10:39:16 >> ????: Re: Per-user quota (passwd) >> Our solution: >> userdb { >> args = /etc/imap.passwd >> driver = passwd-file >> override_fields = home=/var/vmail/glu_vrem/%u >> } >> userdb { >> driver = passwd >> override_fields = home=/var/vmail/glu_vrem/%u >> } >> >> Users with non-standard quota in passwd-file: >>>>>>>> administrator:*:95400500:95400513:Administrator:/home/DOM/administrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >>>>>>>> administrator@email.dom:*:95400500:95400513:Administrator:/home/DOM/administrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >> Others from passwd. >> >> Its works! Thanks. >> >> >> ----- ???????? ????????? ----- >>> ??: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> >>> ????: "dovecot" <dovecot(a)dovecot.org> >>> ????????????: ???????, 29 ???? 2017 ? 14:40:44 >>> ????: Re: Per-user quota (passwd) >>> Oh you have multiple db's, I missed that. >>> >>> Remove auth_username_format, and instead >>> >>> userdb { >>> args = /etc/imap.passwd username_format=%Ln >>> driver = passwd-file >>> override_fields = home=/var/vmail/glu_vrem/%u >>> } >>> >>> On 29.06.2017 14:35, Evgeniy Korneechev wrote: >>>> with auth_username_format = %Ln: >>>> >>>> Jun 28 14:43:41 auth: Debug: master in: USER 1 iivanov.ia(a)example.com >>>> service=lda >>>> Jun 28 14:43:41 auth-worker(18369): Debug: passwd(iivanov.ia): lookup >>>> Jun 28 14:43:41 auth-worker(18369): Info: passwd(iivanov.ia): unknown user - >>>> trying the next userdb >>>> Jun 28 14:43:41 auth-worker(18369): Debug: sql(iivanov.ia): SELECT email as >>>> user, maildir as home, CONCAT('maildir:', maildir, '/Maildir') as mail, uid, >>>> gid, \ >>>> CONCAT('*:storage=', quota, 'B') AS quota_rule, CONCAT(maildir, '/.sieve') as >>>> sieve FROM mail_user WHERE (login = 'iivanov.ia' OR email = 'iivanov.ia') >>>> Jun 28 14:43:41 auth-worker(18369): Info: sql(iivanov.ia): unknown user >>>> >>>> Maybe %Lu? >>>> >>>> ----- ???????? ????????? ----- >>>>> ??: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> >>>>> ????: "dovecot" <dovecot(a)dovecot.org> >>>>> ????????????: ???????, 29 ???? 2017 ? 14:10:07 >>>>> ????: Re: Per-user quota (passwd) >>>>> Yes. >>>>> >>>>> Aki >>>>> >>>>> On 29.06.2017 14:07, Evgeniy Korneechev wrote: >>>>>> And if such a user: >>>>>> email (from AD) = ivanov.ia(a)example.com >>>>>> login (from AD), %n = iivanov >>>>>> %d = DOM >>>>>> %u = iivanov@DOM >>>>>> >>>>>> ? >>>>>> >>>>>> ----- ???????? ????????? ----- >>>>>>> ??: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> >>>>>>> ????: "dovecot" <dovecot(a)dovecot.org> >>>>>>> ????????????: ???????, 29 ???? 2017 ? 13:59:05 >>>>>>> ????: Re: Per-user quota (passwd) >>>>>>> or use, as I indicated before, auth_username_format = %Ln >>>>>>> >>>>>>> Aki >>>>>>> >>>>>>> >>>>>>> On 29.06.2017 13:58, Evgeniy Korneechev wrote: >>>>>>>> Hi! >>>>>>>> workaround: >>>>>>>> administrator:*:95400500:95400513:Administrator:/home/DOM/administrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >>>>>>>> administrator@email.dom:*:95400500:95400513:Administrator:/home/DOM/administrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>> userdb_mail=maildir:/var/vmail/glu_vrem/administrator/Maildir >>>>>>>> >>>>>>>> But this is not a solution for 1000 users ... >>>>>>>> Maybe is there extra field "userdb_mail=administrator(a)email.dom" for email to >>>>>>>> passwd-file? >>>>>>>> >>>>>>>> ----- ???????? ????????? ----- >>>>>>>>> ??: "Aki Tuomi" <aki.tuomi(a)dovecot.fi> >>>>>>>>> ????: "dovecot" <dovecot(a)dovecot.org> >>>>>>>>> ????????????: ?????, 28 ???? 2017 ? 12:40:48 >>>>>>>>> ????: Re: Per-user quota (passwd) >>>>>>>>> On 28.06.2017 12:36, Aki Tuomi wrote: >>>>>>>>>> On 28.06.2017 12:25, Evgeniy Korneechev wrote: >>>>>>>>>>> Hello! >>>>>>>>>>> We have passwd=pam, userdb=passwd. >>>>>>>>>>> passdb { >>>>>>>>>>> driver = pam #server was entered domain Active Directory >>>>>>>>>>> } >>>>>>>>>>> userdb { >>>>>>>>>>> driver = passwd >>>>>>>>>>> override_fields = home=/var/vmail/glu_vrem/%u >>>>>>>>>>> } >>>>>>>>>>> >>>>>>>>>>> How can i use per-user quota? Only passwd-file? >>>>>>>>>>> >>>>>>>>>>> I tried: >>>>>>>>>>> userdb { >>>>>>>>>>> args = /etc/imap.passwd >>>>>>>>>>> driver = passwd-file >>>>>>>>>>> override_fields = home=/var/vmail/glu_vrem/%u >>>>>>>>>>> } >>>>>>>>>>> /etc/imap.passwd: >>>>>>>>>>> administrator:*:95400500:95400513:Administrator:/home/DOM/administrator:/bin/bash::userdb_quota_rule=*:bytes=10G >>>>>>>>>>> >>>>>>>>>>> Authentication and quota - now OK. But doesn't work sending and receiving >>>>>>>>>>> mail... >>>>>>>>>>> postfix say 'Unknown user'... >>>>>>>>>>> >>>>>>>>>>> >>>>>>>>>>> Turn on auth_debug and auth_verbose and see what it says. >>>>>>>>>>> >>>>>>>>>>> Aki >>>>>>>>> Also you can set auth_username_format = %Ln to force usernames into >>>>>>>>> lowercase without domain. >>>>>>>>> >>>>>>>>> Aki >> -- >> WBR, Korneechev Evgeniy >> BaseALT/ALTLinux Team ------------------------------ Message: 4 Date: Mon, 11 Sep 2017 14:56:28 +0200 From: "Nagy, Attila" <bra(a)fsn.hu> To: Aki Tuomi <aki.tuomi(a)dovecot.fi>, dovecot(a)dovecot.org Subject: Re: Is it possible to disable pipelining in imapc? Message-ID: <a6ced659-fa75-60c9-01f7-bfb36e826466(a)fsn.hu> Content-Type: text/plain; charset=utf-8; format=flowed On 09/11/2017 12:12 PM, Aki Tuomi wrote: > Is there some reason you can't use normal proxy instead of imap backend? > That is,return proxy, host=imap_backend, port=1430? There seems to be no > pipeline setting currently for imapc in v2.2. > Yes, because it's a dumb IMAP server, which doesn't implement a lot of things, like SEARCH, FETCH BODYSTRUCTURE and similar. Dovecot is used as a smart proxy, which makes it possible to use it as a fully featured IMAP server. ------------------------------ Subject: Digest Footer _______________________________________________ dovecot mailing list dovecot(a)dovecot.org https://dovecot.org/mailman/listinfo/dovecot ------------------------------ End of dovecot Digest, Vol 173, Issue 28 ****************************************

2 1

Moving emails tagged as spam to the Junk folder
by Mika Leppänen 12 Sep '17

12 Sep '17

I am running Ubuntu 16.04. I am following this guide: https://wiki2.dovecot.org/HowTo/AntispamWithSieve. At the end when I try to compile the .sieve files, I get this error: sievec(root): Fatal: Plugin 'sieve_imapsieve' not found from directory /usr/lib/dovecot/modules/sieve. Does anyone know about this? I have dovecot-sieve installed and I'm using Postfix and Spamassassin. -- Mika Leppänen -- mika.leppanen(a)iki.fi

3 2

Re: Share Website certificate with SSL/STL Dovecot IMAP and Postifix SMTP
by Joseph Tam 11 Sep '17

11 Sep '17

Marco Marco writes writes: > I've bought a certificate from the authority for my website to use to > access in https mode. > > Is it possible to share the same pairs to authenticate the emails sent > by postfix and Dovecot in order to avoid that client as Hotmail.it or > Gmail intercept these as Spam? By "same pairs", I assume you mean key and certificate. Yes, just as long as you use the same Subject for all your services (e.g. "mail.yourdomain.com") or you have purchased a wildcard certificate e.g. "*.yourdomain.com" to authenticate "webmail.yourdomain.com", "imap.yourdomain.com", "smtp.yourdomain.com", etc.) Certificates do not authenticate services or protocols, but server names (typically). Joseph Tam <jtam.home(a)gmail.com>

1 0

Returning error response to the client from passdb (with dict protocol)
by Nagy, Attila 11 Sep '17

11 Sep '17

Hi, When using a passdb with (UNIX socket) dict protocol, I can return a JSON with fields. When I want to deny the user, I can send a JSON like this: {"fail":true} which yields (on POP) a friendly -ERR [AUTH] Authentication failed. Is it possible to return the response text itself? I want to tell the user why the authentication has failed.

1 0

Fail2ban 'Password mismatch' regex
by James Brown 11 Sep '17

11 Sep '17

I have turned on 'auth_debug_passwords=yes’ in dovecot.conf. I’m trying to get Fail2ban to detect this log line: Sep 11 15:52:49 mail dovecot[54239]: auth-worker(10094): sql(user(a)bordo.com.au <mailto:user@bordo.com.au>,::1,<L2xqieNYeM4AAAAAAAAAAAAAAAAAAAAB>): Password mismatch (given password: 2) I’ve added it as the last line of my dovecot filter regex: failregex = ^%(__prefix_line)s(%(__pam_auth)s($dovecot:auth$)?:)?\s+authentication failure; logname=\S* uid=\S* euid=\S* tty=dovecot ruser=\S* rhost=<HOST>(\s+user=\S*)?\s*$ ^%(__prefix_line)s(pop3|imap)-login: (Info: )?(Aborted login|Disconnected)(: Inactivity)? $((auth failed, \d+ attempts)( in \d+ secs)?|tried to use (disabled|disallo$ ^%(__prefix_line)s(Info|dovecot: auth\(default$|auth-worker$\d+$): pam$\S+,<HOST>$: pam_authenticate failed: (User not known to the underlying authentication$ ^%(__prefix_line)s(auth|auth-worker$\d+$): (pam|passwd-file)$\S+,<HOST>$: unknown user\s*$ ^%(__prefix_line)s(auth|auth-worker$\d+$): Info: ldap$\S*,<HOST>,\S*$: invalid credentials\s*$ ^%(__prefix_line)sauth: Info: sql$\S+,<HOST>$: (Password mismatch|unknown user)( $(SHA1 of given password: [0-9a-f]{5,40}|given password: \w*)$)?$ Have spent ages googling and trying different variations. Does anyone have a fail2ban regex that would work on the above Dovecot log line? (Running latest versions of Dovecot and fail2ban) Many thanks, James.

3 5

Is it possible to disable pipelining in imapc?
by Nagy, Attila 11 Sep '17

11 Sep '17

Hi, I've a broken IMAP server, which doesn't support pipelining and fails on dovecot's attempt to do this ([C] is dovecot's imapc, [S] is the IMAP server): [C] 24 LOGIN "user" "pass" [S] 23 OK [C] 25 SELECT "INBOX" [C] 23 UID FETCH 2 (INTERNALDATE) [S] 25 OK [S] 23 BAD No mailbox selected Sadly, fixing the server would be a hard task, turning off pipelining in dovecot's imapc (which already supports many workarounds for different servers) could be easy... ... except I can see no place to do this in imapc (only in pop3c and imap proxy, which I guess doesn't apply here). If I'm right, may I ask for a knob for such dumb servers? Thanks,

3 13

Per-user quota (passwd)
by Evgeniy Korneechev 11 Sep '17

11 Sep '17

Hello! We have passwd=pam, userdb=passwd. passdb { driver = pam #server was entered domain Active Directory } userdb { driver = passwd override_fields = home=/var/vmail/glu_vrem/%u } How can i use per-user quota? Only passwd-file? I tried: userdb { args = /etc/imap.passwd driver = passwd-file override_fields = home=/var/vmail/glu_vrem/%u } /etc/imap.passwd: administrator:*:95400500:95400513:Administrator:/home/DOM/administrator:/bin/bash::userdb_quota_rule=*:bytes=10G Authentication and quota - now OK. But doesn't work sending and receiving mail... postfix say 'Unknown user'... Is there "extra_field" in passwd-file for email? What generally will be advice on quotas in our case? dovecot -n: # 2.2.27 (c0f36b0): /etc/dovecot/dovecot.conf # Pigeonhole version 0.4.16 (fed8554) # OS: Linux 4.4.39-std-def-alt0.M80P.1 x86_64 ALT 8.1 Server auth_debug = yes auth_debug_passwords = yes auth_mechanisms = plain login cram-md5 auth_socket_path = /var/run/dovecot/auth-userdb auth_username_chars = auth_verbose = yes auth_verbose_passwords = plain base_dir = /var/run/dovecot/ debug_log_path = /var/log/dovecot disable_plaintext_auth = no first_valid_gid = 502 first_valid_uid = 502 last_valid_gid = 268999999 last_valid_uid = 268999999 log_path = /var/log/dovecot login_log_format_elements = user=<%u> method=%m rip=%r lip=%l mpid=%e %c mail_access_groups = vmail mail_debug = yes mail_gid = 502 mail_location = maildir:/%Lh/Maildir/:INDEX=/%Lh/Maildir/ mail_plugins = " quota autocreate" mail_privileged_group = vmail mail_uid = 502 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext imapflags notify mbox_write_locks = fcntl namespace { list = children location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u prefix = shared/%%u/ separator = / subscriptions = yes type = shared } namespace inbox { inbox = yes location = prefix = separator = / type = private } passdb { driver = pam } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { quota_rule = *:storage=5G recipient_delimiter = + sieve = /etc/dovecot/sieves/default.sieve sieve_default = /etc/dovecot/sieves/default.sieve sieve_dir = ~/sieve sieve_extensions = +notify +imapflags sieve_max_redirects = 8 } protocols = imap pop3 lmtp sieve service auth-worker { user = root } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { group = vmail mode = 0666 user = vmail } } service dict { unix_listener dict { group = vmail mode = 0600 user = vmail } } service imap-login { inet_listener imap { port = 143 } } service imap { process_limit = 1024 vsz_limit = 256 M } service lmtp { unix_listener lmtp { mode = 0666 } } service managesieve-login { inet_listener sieve { port = 4190 } vsz_limit = 64 M } service pop3-login { inet_listener pop3 { port = 110 } } service pop3 { process_limit = 1024 } ssl_ca = </usr/share/ca-certificates/ca-bundle.crt ssl_cert = </etc/dovecot/server.crt ssl_key = # hidden, use -P to show it userdb { driver = passwd override_fields = home=/var/vmail/glu_vrem/%u } userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lmtp { mail_plugins = " quota autocreate sieve" } protocol lda { mail_plugins = " quota autocreate sieve quota" plugin { quota = dict:user::file:/var/vmail/glu_vrem/%n/.quotausage } } protocol imap { mail_plugins = " quota autocreate autocreate imap_quota" plugin { autocreate = INBOX autocreate2 = Sent autocreate3 = Trash autocreate4 = Drafts autocreate5 = Junk autosubscribe = INBOX autosubscribe2 = Sent autosubscribe3 = Trash autosubscribe4 = Drafts autosubscribe5 = Junk quota = dict:user::file:/var/vmail/glu_vrem/%n/.quotausage } } protocol sieve { mail_max_userip_connections = 10 managesieve_implementation_string = Dovecot Pigeonhole managesieve_logout_format = bytes=%i/%o managesieve_max_compile_errors = 5 managesieve_max_line_length = 65536 } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } -- WBR, Korneechev Evgeniy BaseALT/ALTLinux Team

2 11

RE: pop3-login core dump when using TLSSTART on version dovecot-2.2.32 (INTERNAL)
by Arvid.Eikas＠telenor.com 11 Sep '17

11 Sep '17

Hi, I switched back to 2.2.27 with the same config that I am using for 2.2.32 and it work fine. Sep 11 11:49:37 imap-login: Info: Login: user=<viboge>, method=PLAIN, rip=88.89.118.45, lip=148.123.160.116, mpid=18709, TLS, session=<v7o22OZYrsdYWXYt> Sep 11 11:49:40 imap(mailuser) Session-ID v7o22OZYrsdYWXYt RemoteIP 88.89.118.45 Maildir /var/nextmail/nfs2.flex14/49/79/841 Info: Logged out in=4518 out=273720 deleted 0 expunged 0 trashed 0 Sep 11 11:49:40 imap-login: Debug: SSL alert: close notify [88.89.118.45] How could I proceed? Any clue? It is quite annoying to see this entry in the log for each session. Arvid -----Original Message----- From: Aki Tuomi [mailto:aki.tuomi@dovecot.fi] Sent: 11. september 2017 09:18 To: Eikås Arvid; dovecot(a)dovecot.org Subject: Re: pop3-login core dump when using TLSSTART on version dovecot-2.2.32 (INTERNAL) Hi! I tried to reproduce this problem with dovecot-2.2.32 and OpenSSL 1.0.1k and was not able to. I enabled -DREF_CHECK on OpenSSL, but to no avail, the process did not crash. Is there something else you've done? Aki On 11.09.2017 08:07, Arvid.Eikas(a)telenor.com wrote: > Hi, > > Here is the gdb output. > > Arvid > > GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-94.el7 Copyright (C) 2013 > Free Software Foundation, Inc. > License GPLv3+: GNU GPL version 3 or later > <http://gnu.org/licenses/gpl.html> > This is free software: you are free to change and redistribute it. > There is NO WARRANTY, to the extent permitted by law. Type "show copying" > and "show warranty" for details. > This GDB was configured as "x86_64-redhat-linux-gnu". > For bug reporting instructions, please see: > <http://www.gnu.org/software/gdb/bugs/>... > Reading symbols from /local/misc/mail/dovecot-32/libexec/dovecot/pop3-login...done. > [New LWP 15894] > Core was generated by `dovecot-test/pop3-login'. > Program terminated with signal 6, Aborted. > #0 0x00007ff0bd9cf1d7 in raise () from /lib64/libc.so.6 Missing > separate debuginfos, use: debuginfo-install > glibc-2.17-157.el7_3.1.x86_64 > (gdb) bt full > #0 0x00007ff0bd9cf1d7 in raise () from /lib64/libc.so.6 No symbol > table info available. > #1 0x00007ff0bd9d08c8 in abort () from /lib64/libc.so.6 No symbol > table info available. > #2 0x00007ff0bd3c0f2f in engine_unlocked_finish (e=0x1c51c60, unlock_for_handlers=1) at eng_init.c:115 > to_return = 1 > #3 0x00007ff0bd3c1064 in ENGINE_finish (e=0x1c51c60) at eng_init.c:150 > to_return = 1 > #4 0x00007ff0be0f9300 in ssl_proxy_deinit () from > /local/nextmail/dovecot/lib64/dovecot/libdovecot-login.so.0 > No symbol table info available. > #5 0x00007ff0be0f4472 in main_deinit () from > /local/nextmail/dovecot/lib64/dovecot/libdovecot-login.so.0 > No symbol table info available. > #6 0x00007ff0be0f479f in login_binary_run () from > /local/nextmail/dovecot/lib64/dovecot/libdovecot-login.so.0 > No symbol table info available. > #7 0x00000000004032da in main (argc=1, argv=0x7ffe3059f3f8) at > client.c:356 No locals. > > > > -----Original Message----- > From: Aki Tuomi [mailto:aki.tuomi@dovecot.fi] > Sent: 8. september 2017 14:08 > To: Eikås Arvid; dovecot(a)dovecot.org > Subject: Re: pop3-login core dump when using TLSSTART on version > dovecot-2.2.32 (OPEN) > > I assume you mean STARTTLS. Can you provide gdb /path/to/bin /path/to/core and provide output of bt full? > > Aki > > > On 08.09.2017 15:01, Arvid.Eikas(a)telenor.com wrote: >> Hi, >> >> Pop3-login are CORE-dumping when I log on with TLSSTART, I believe the same will happen with imap-logon to, but I have not tested it yet. >> The TLS session is coming up and it works fine until I log off, then it's core dump. Open sslvesrion is openssl-1.0.2k. >> We ran dovecot-2.2.27 before we upgraded to dovecote-2.2.32, and that >> seems to work fine. (not core dumping) >> >> >> Arvid >> >> >> LOG >> Sep 05 14:27:34 pop3-login: Debug: SSL: elliptic curve secp384r1 will >> be used for ECDH and ECDHE key exchanges Sep 05 14:30:30 pop3-login: >> Debug: SSL: elliptic curve secp384r1 will be used for ECDH and ECDHE >> key exchanges Sep 05 14:30:30 pop3-login: Debug: SSL: elliptic curve >> secp384r1 will be used for ECDH and ECDHE key exchanges Sep 05 >> 14:30:42 pop3-login: Debug: SSL: elliptic curve secp384r1 will be >> used for ECDH and ECDHE key exchanges Sep 05 14:30:42 pop3-login: Debug: >> SSL: elliptic curve secp384r1 will be used for ECDH and ECDHE key >> exchanges Sep 05 14:30:50 pop3-login: Info: Login: user=<tstrand>, >> method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=18361, secured, >> session=<65m8ZXBYtpN/AAAB> Sep 05 14:30:50 pop3-login: Error: >> ENGINE_finish, bad functional reference count Sep 05 14:30:50 >> pop3-login: Fatal: master: service(pop3-login): child 18359 killed >> with signal 6 (core dumped) >> >> >> >> >> >> >> From ./crypto/engine/eng_init.c >> >> ......... >> int engine_unlocked_finish(ENGINE *e, int unlock_for_handlers) { >> int to_return = 1; >> >> /* >> * Reduce the functional reference count here so if it's the terminating >> * case, we can release the lock safely and call the finish() handler >> * without risk of a race. We get a race if we leave the count until >> * after and something else is calling "finish" at the same time - >> * there's a chance that both threads will together take the count from 2 >> * to 0 without either calling finish(). >> */ >> e->funct_ref--; >> engine_ref_debug(e, 1, -1); >> if ((e->funct_ref == 0) && e->finish) { >> if (unlock_for_handlers) >> CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE); >> to_return = e->finish(e); >> if (unlock_for_handlers) >> CRYPTO_w_lock(CRYPTO_LOCK_ENGINE); >> if (!to_return) >> return 0; >> } >> #ifdef REF_CHECK >> if (e->funct_ref < 0) { >> fprintf(stderr, "ENGINE_finish, bad functional reference count\n"); >> abort(); >> >> ......... >> >> /* The API (locked) version of "finish" */ int ENGINE_finish(ENGINE >> *e) { >> int to_return = 1; >> >> if (e == NULL) { >> ENGINEerr(ENGINE_F_ENGINE_FINISH, ERR_R_PASSED_NULL_PARAMETER); >> return 0; >> } >> CRYPTO_w_lock(CRYPTO_LOCK_ENGINE); >> to_return = engine_unlocked_finish(e, 1); >> CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE); >> if (!to_return) { >> ENGINEerr(ENGINE_F_ENGINE_FINISH, ENGINE_R_FINISH_FAILED); >> return 0; >> } >> return to_return; >> }

2 1

doveadm expunge returns error code 68
by Florian Lohoff 11 Sep '17

11 Sep '17

Hi, i am running basically this from cron: /usr/bin/doveadm -v expunge -u * mailbox INBOX.Spam SENTBEFORE 90d /usr/bin/doveadm -v expunge -u * mailbox INBOX.Trash SENTBEFORE 90d /usr/bin/doveadm -v expunge -u * mailbox INBOX.Junk SENTBEFORE 90d Now i am experiencing that the first line e.g. expunging INBOX.Spam returns the error code 68. No syslog/Output whatsoever. I tried running with -vvv -D which gives me a lot of output (for all mailboxes) but still i am unable to pinpoint the problem. The later 2 commands return "0" as expected. Where does the error return code come from and what does 68 mean? Flo -- Florian Lohoff f(a)zz.de UTF-8 Test: The 🐈 ran after a 🐁, but the 🐁 ran away

2 3

Dovecot and Letsencrypt certs
by ＠lbutlr 11 Sep '17

11 Sep '17

So this morning at 4am I was awoken to my mail clients getting certificate errors for an expired certificate. I hopped on to the server and checked and… no, the LE certs renewed last month and are valid until November. After some moments of confusion I noticed that dovecot had been running since before the renewal, so I did a quick service dovecot restart which fixed everything. Should dovecot check for certs being refreshed? Or is this an artifact of my using symbolic links everywhere to point to the newest LE certs (which are themselves links the dehydrate script creates to point to the newest cert-1502534746.csr etc files? Should I just create a monthly cron to restart dovecot or is there something else? -- Apple broke AppleScripting signatures in Mail.app, so no random signatures.

8 14

RE: pop3-login core dump when using TLSSTART on version dovecot-2.2.32 (INTERNAL)
by Arvid.Eikas＠telenor.com 11 Sep '17

11 Sep '17

Hi, Here is the gdb output. Arvid GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-94.el7 Copyright (C) 2013 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-redhat-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /local/misc/mail/dovecot-32/libexec/dovecot/pop3-login...done. [New LWP 15894] Core was generated by `dovecot-test/pop3-login'. Program terminated with signal 6, Aborted. #0 0x00007ff0bd9cf1d7 in raise () from /lib64/libc.so.6 Missing separate debuginfos, use: debuginfo-install glibc-2.17-157.el7_3.1.x86_64 (gdb) bt full #0 0x00007ff0bd9cf1d7 in raise () from /lib64/libc.so.6 No symbol table info available. #1 0x00007ff0bd9d08c8 in abort () from /lib64/libc.so.6 No symbol table info available. #2 0x00007ff0bd3c0f2f in engine_unlocked_finish (e=0x1c51c60, unlock_for_handlers=1) at eng_init.c:115 to_return = 1 #3 0x00007ff0bd3c1064 in ENGINE_finish (e=0x1c51c60) at eng_init.c:150 to_return = 1 #4 0x00007ff0be0f9300 in ssl_proxy_deinit () from /local/nextmail/dovecot/lib64/dovecot/libdovecot-login.so.0 No symbol table info available. #5 0x00007ff0be0f4472 in main_deinit () from /local/nextmail/dovecot/lib64/dovecot/libdovecot-login.so.0 No symbol table info available. #6 0x00007ff0be0f479f in login_binary_run () from /local/nextmail/dovecot/lib64/dovecot/libdovecot-login.so.0 No symbol table info available. #7 0x00000000004032da in main (argc=1, argv=0x7ffe3059f3f8) at client.c:356 No locals. -----Original Message----- From: Aki Tuomi [mailto:aki.tuomi@dovecot.fi] Sent: 8. september 2017 14:08 To: Eikås Arvid; dovecot(a)dovecot.org Subject: Re: pop3-login core dump when using TLSSTART on version dovecot-2.2.32 (OPEN) I assume you mean STARTTLS. Can you provide gdb /path/to/bin /path/to/core and provide output of bt full? Aki On 08.09.2017 15:01, Arvid.Eikas(a)telenor.com wrote: > Hi, > > Pop3-login are CORE-dumping when I log on with TLSSTART, I believe the same will happen with imap-logon to, but I have not tested it yet. > The TLS session is coming up and it works fine until I log off, then it's core dump. Open sslvesrion is openssl-1.0.2k. > We ran dovecot-2.2.27 before we upgraded to dovecote-2.2.32, and that > seems to work fine. (not core dumping) > > > Arvid > > > LOG > Sep 05 14:27:34 pop3-login: Debug: SSL: elliptic curve secp384r1 will > be used for ECDH and ECDHE key exchanges Sep 05 14:30:30 pop3-login: > Debug: SSL: elliptic curve secp384r1 will be used for ECDH and ECDHE > key exchanges Sep 05 14:30:30 pop3-login: Debug: SSL: elliptic curve > secp384r1 will be used for ECDH and ECDHE key exchanges Sep 05 > 14:30:42 pop3-login: Debug: SSL: elliptic curve secp384r1 will be used > for ECDH and ECDHE key exchanges Sep 05 14:30:42 pop3-login: Debug: > SSL: elliptic curve secp384r1 will be used for ECDH and ECDHE key > exchanges Sep 05 14:30:50 pop3-login: Info: Login: user=<tstrand>, > method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=18361, secured, > session=<65m8ZXBYtpN/AAAB> Sep 05 14:30:50 pop3-login: Error: > ENGINE_finish, bad functional reference count Sep 05 14:30:50 > pop3-login: Fatal: master: service(pop3-login): child 18359 killed > with signal 6 (core dumped) > > > > > > > From ./crypto/engine/eng_init.c > > ......... > int engine_unlocked_finish(ENGINE *e, int unlock_for_handlers) { > int to_return = 1; > > /* > * Reduce the functional reference count here so if it's the terminating > * case, we can release the lock safely and call the finish() handler > * without risk of a race. We get a race if we leave the count until > * after and something else is calling "finish" at the same time - > * there's a chance that both threads will together take the count from 2 > * to 0 without either calling finish(). > */ > e->funct_ref--; > engine_ref_debug(e, 1, -1); > if ((e->funct_ref == 0) && e->finish) { > if (unlock_for_handlers) > CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE); > to_return = e->finish(e); > if (unlock_for_handlers) > CRYPTO_w_lock(CRYPTO_LOCK_ENGINE); > if (!to_return) > return 0; > } > #ifdef REF_CHECK > if (e->funct_ref < 0) { > fprintf(stderr, "ENGINE_finish, bad functional reference count\n"); > abort(); > > ......... > > /* The API (locked) version of "finish" */ int ENGINE_finish(ENGINE > *e) { > int to_return = 1; > > if (e == NULL) { > ENGINEerr(ENGINE_F_ENGINE_FINISH, ERR_R_PASSED_NULL_PARAMETER); > return 0; > } > CRYPTO_w_lock(CRYPTO_LOCK_ENGINE); > to_return = engine_unlocked_finish(e, 1); > CRYPTO_w_unlock(CRYPTO_LOCK_ENGINE); > if (!to_return) { > ENGINEerr(ENGINE_F_ENGINE_FINISH, ENGINE_R_FINISH_FAILED); > return 0; > } > return to_return; > }

2 1

Share Website certificate with SSL/STL Dovecot IMAP and Postifix SMTP
by Marco Marco 10 Sep '17

10 Sep '17

Hi guys, I've bought a certificate from the authority for my website to use to access in https mode. Is it possible to share the same pairs to authenticate the emails sent by postfix and Dovecot in order to avoid that client as Hotmail.it or Gmail intercept these as Spam? Thank you

2 1

Embeding a path in address extensions
by ＠lbutlr 09 Sep '17

09 Sep '17

I generate bcc backups with the pattern backups+DATE.user.domain.tld(a)myBackupDomain.tld (for example, backups+20170908.kremels.kreme.com(a)myBackupDomain.tld) This puts mail in …/.20170908.kremels.kreme.com/new What I would like to do is get the expansion to generate the following path …/.20170908/.kremels.kreme.com/new Of course the date changes everyday, but it will always be numeric if that helps. dovecot get the mail from postfix: dovecot unix - n n - - pipe flags=DRhu user=vpopmail:vchkpw argv=/usr/local/libexec/dovecot/dovecot-lda -f ${sender} -d ${user}@${nexthop} -m ${extension} -a ${original_recipient} Would it make more sense (or is it even possible) to split the extension in postfix or to do something with sieve? Or is there a character I can use in the extension that tells dovecot to create a path? Even though I am using a maildir structure for the backups, this "account" never accesses the mail via a MUA, only via the command line when an admin has to restore an email, so it would be much easier to deal with this with daily subfolders. Or, maybe I make the admins use an MUA? If so, I should replace most of these .'s with dashes… -- Apple broke AppleScripting signatures in Mail.app, so no random signatures.

1 1

can't get quota working. I use static userdb driver.
by Вадим Бажов 08 Sep '17

08 Sep '17

Hi, people ! Set up global quota according to docs to 2 Mb. Send more than ten Mb on the box. Mail still getting put in the box, no bounces, no error messages in logs, nothing to prevent mail to be delivered in overflooded mailbox. quota settings are: mail_plugins = quota lmtp_rcpt_check_quota = yes quota_full_tempfail = yes protocol lmtp { postmaster_address = postmaster # required mail_plugins = $mail_plugins sieve } protocol lda { mail_plugins = $mail_plugins sieve } protocol imap { mail_plugins = $mail_plugins imap_quota } plugin { quota = maildir:"User quota" quota_rule = *:storage=10M quota_rule3 = INBOX.Trash:storage=+10%% quota_exceeded_message = "552 5.2.2 Mailbox is full" } doveconf -n is attached. # doveadm quota get Quota name Type Value Limit % "User quota" STORAGE 0 10240 0 "User quota" MESSAGE 0 - # doveadm quota get -u vadim Quota name Type Value Limit % "User quota" STORAGE 0 10240 0 "User quota" MESSAGE 0 - # du -sh /var/mail/vadim/ 23M /var/mail/vadim/ I tried to pass quota_rule as an argument to userdb, quota is being parsed, but still doesn't work. I think problem is that dovecot can't (re)calculate the actual quota on disc (cant calculate how disk space mailbox is used), despite the fact that quota limit itself is configured correctly, since dovecot shows it in log and doveconf -n. What I am dong wrong ?

4 8