- dovecot - dovecot.org

example/config misses required section names for passdb{} and userdb{}
by Дилян Палаузов 20 May '24

20 May '24

Hello, I installed Dovecot from git 6b1bcf1bad1d78e, copied /usr/local/share/doc/dovecot/example/config to /usr/local/etc/dovecot and called dovecot -F . The system reported doveconf: Fatal: Error in configuration file /usr/local/etc/dovecot/conf.d/auth-system.conf.ext line 11: passdb { } is missing section name The problem remains, if I delete dovecot-dict-auth.conf.ext dovecot-ldap.conf.ext dovecot-oauth2.conf.ext dovecot-sql.conf.ext conf.d/auth-deny.conf.ext conf.d/auth-ldap.conf.ext conf.d/auth-passwdfile.conf.ext conf.d/auth-static.conf.ext conf.d/auth-dict.conf.ext conf.d/auth-master.conf.ext conf.d/auth-sql.conf.ext thus leaving passdb {} and userdb {} defined on a single place. Indeed, auth-system.conf.ext contains the sections passdb and userdb without the optional name, as described at https://doc.dovecot.org/configuration_manual/config_file/#sections . The problem report is that the example configuration does not contain for sections userdb and passdb a section name, and at the same time the as optional described section name is mandatory in Dovecot on these places. Kind regards Dilyan

2 1

Dovecot logging to files causes issues
by Richard Rosner 20 May '24

20 May '24

I have a mailing server setup based on Debian Stable that uses postfix (v3.7.10) for SMTP and dovecot (v2.3.19.1 (9b53102964)) for IMAP. I now wanted to set dovecot to not write to syslog, but to dedicated files in /var/log/dovecot. While everything indicates that this happens successfully as the log files gain in size, I also get lots of these errors: May 13 20:55:37 mail postfix/local[2824184]: 95BCF1000A9: to=<user(a)domain.de>, relay=local, delay=3.2, delays=1.9/0.29/0/1.1, dsn=4.3.0, status=deferred (temporary failure. Command output: lda(user): Error: net_connect_unix(/run/dovecot/stats-writer) failed: Permission denied Can't open log file /var/log/dovecot/error.log: Permission denied ) If it would only log the complaints I wouldn't worry, but as long as I don't revert the changes in dovecot's config, mail receiving is at least vastly delayed, most likely stuck alltogether. So how am I supposed to set these settings? I've chainged these settings in /etc/dovecot/conf.d/10-logging.conf: log_path = /var/log/dovecot/error.log debug_log_path = /var/log/dovecot/debug.log log_debug = category=error The whole directory /var/log/dovecot is owned by dovecot:dovecot, permissions on debug.log, error.log and info.log are 644. Best Richard

5 10

Re: Failing to archive many messages
by Francis Augusto Medeiros-Logeay 18 May '24

18 May '24

Today I realized that it was indeed the sa-learn that is slowing down my Archiving. I added an «&» on the end of the line that calls the sa-learn (called by the report-ham.sieve script): exec /usr/bin/sa-learn -u ${1} --ham & Does anyone thing this is a bad idea? I noticed that archiving got way faster this way… Best, Francis > On 9 May 2024, at 23:09, dovecot-request(a)dovecot.org wrote: > >> On 9 May 2024, at 19:45, dovecot-request(a)dovecot.org <mailto:dovecot-request@dovecot.org> wrote: >> >> Francis Augusto Medeiros-Logeay via dovecot skrev den 2024-05-09 12:29: >> >>>> If you want to analyze emails, why not do it with scheduled crons >>>> after they are archived? >> >> maybe ask for skip older then one day in here >> https://github.com/isbg/isbg/tree/master >> >> while roundcube just set the needed flag for retest ? >> >>> wouldn't it reanalyze all archived messages anyway? >> >> sometimes email is ham at recpt stage, while its spam later on test, >> this is why isbg is made imho :) > > > I see. > > But I wonder if there is something wrong with what I already have. It worked fine for years, and it works fine for most of my users. I tested with a few accounts, and Archving (with its sa-learn script) works blazingly fast. But with one user - happens to be mine - it is super slow when archiving, most likely due the sa-learn. > > Best, > > Francis

2 2

Sieve extprograms pipe :try cancels implicit keep
by Sebastiaan Hoogeveen 17 May '24

17 May '24

Hi, When using the :try tag on the pipe command in the sieve_extprograms plugin Sieve’s implicit keep is cancelled if the executed command fails. The specification on https://raw.githubusercontent.com/dovecot/pigeonhole/master/doc/rfc/spec-bo… states: “When the ":try" tag is specified, the "pipe" instruction will attempt execution of the external program, but failure will not cause the whole Sieve script execution to fail with an error. Instead, the Sieve processing continues as if the "pipe" action was never triggered." However, using the :try tag marks the pip command as successful even if it fails and because pipe is a disposition-type action the implicit keep is cancelled, resulting in the piped message being discarded. If this is the intended behaviour then I would suggest amending the text of the specification to: “When the ":try" tag is specified, the "pipe" instruction will attempt execution of the external program, but failure will not cause the whole Sieve script execution to fail with an error. Instead, the Sieve processing continues as if the "pipe" action was executed successfully and cancel implicit keep.” If this is not the intended behaviour then please consider this a bug report, with my apologies for not adding a patch (it seems to be a bit more complex than just changing the return value of act_pipe_commit). Kind regards, -- Sebastiaan Hoogeveen NederHost https://www.nederhost.nl/ KvK: 34099781

1 0

MySQL connection with SSL
by Gandalf Corvotempesta 16 May '24

16 May '24

Hi all is possible to tell dovecot to use a mysql connection with SSL ? My new remote mysql server only allows ssl connections

6 10

Pigeonhole Sieve only runs scripts if in users' home directories, or if Sieve is purposely broken
by Douglas Morse 15 May '24

15 May '24

Hi, Dovecot version is 2.3.19.1 (9b53102964) running on fully up-to-date Debian 12 (Bookworm) operating system. For the life of me I cannot figure out how to get sieve scripts working correctly in a central directory location. Calling them from users’ home directories works fine (as described below). (Note: This system has recently been migrated from Cyrus IMAP, so some of the directories for a central location are very similar to what would find in a standard Cyrus IMAP installation.) If I set `sieve` to its default value of `file:~/sieve;active=~/.dovecot.sieve` in `conf.d/90-sieve.conf`, sieve works as expected. I have a file `~/sieve/default.sieve` and, as per documentation, I make a symbolic link `~/.dovecot.sieve` that points to that file. The sieve script runs, and I see a `default.svbin` either created or updated in the ~/sieve directories as emails arrive. Setting `sieve` to `file:~/lib/sieve;active=~/.dovecot.sieve` also works as expected. So this verifies I can change the directory where sieve scripts are stored. However, if I then set `sieve` to `file:/var/spool/dovecot/home/%1n/user/%n/sieve;active=file:/var/spool/dovecot/home/%1n/user/%n/.dovecot.sieve`, again a `default.sieve` in each of these user’s centralized `sieve` directories, sieve scripts silently fail to run. No messages of any kind found in any log files. So, with the same exact same configuration as one that is the default and as proven to working, with the single exception of changing the top-level directory (TLD) for the scripts, results in silent failure. Why? What I find particularly odd is that if I keep `sieve` set to this central directory location (i.e., no config changes), and `mv sieve/default.sieve sieve.tmp; rmdir sieve; mv sieve.tmp`, that is, have a *file* called `sieve` where the setting `sieve` points to (which, per docs and experience, should be a *directory*), the users’ sieve scripts *do* run, but with a warning along the lines of `Warning: sieve: file storage: Explicitly specified active script path `file:/var/spool/dovecot/home/m/user/morse/.dovecot.sieve' is ignored; storage path `/var/spool/dovecot/home/m/user/morse/sieve' is not a directory`. In the docs I see that `sieve` used to refer to a file (PidgeonHole Sieve v.0.31 or prior, I believe), and there is mention of a a `sieve_dir` setting (which I have *never* set or used). So my guess is that sieve working in this centralized TLD with `sieve` as a file rather than directory is due to support for some deprecated config / functionality. I have fiddle around with this for some hours, including setting and not setting `mail_home` to the central directory location (i.e., `mail_home` in `conf.d/10-mail.conf` set to the same value as `sieve` in `conf.d/90-sieve.conf`),to no avail. No matter what I do, I cannot get sieve scripts to run in a centralized directory location as they do under `/home`. The only exception is as just described in the preceding paragraph. But the solution only allows a user to have a single sieve script, and I imagine `managesieve` will not work properly is sieve is set up as described in the preceding paragraph. What am I missing or doing incorrectly? Any and all assistance most appreciated. Doug

2 3

lda-dupes-file not updated, when user over quota and sieve vacation enabled
by Christian Rößner 14 May '24

14 May '24

Hi, we have encountered an interesting behavior with users that have their mailboxes over quota while having sieve-vacation enabled. We do a temp fail, if a mailbox is over quota. Problem: -------- If a remote sender sends an email to such a user (over quota + vacation), Dovecot directly creates a response message and sends it back to the sender. So far so good. At the same time the original email cannot be stored in the users INBOX, which leads to a temp fail action. Now the email remains in a queue and whenever the queue manager tries to deliver the email again, the behavior starts again. Send vacation response and temp fail, until either the queue life time exceeds or the user has cleaned up his/her mailbox and the message can be stored. For the remote sender it means getting lots of vacation emails from the same recipient. For each retry one vacation message. Tracing: -------- We dig a little bit deeper and turned on logging to see what happens. Because the email cannot be put into the users INBOX, it keeps in a failure state. And because of this, the dupes-file is not updated for this particular sender. We are not sure, if this is a wanted behavior or not. But for a sender, it is really annoying to receive vacation messages on and on. Solution: --------- Unfortunately we could not find any settings to change this. So I come here and ask for your kindly help. At the moment of this writing I can not provide a doveconf -n output, but I hope you trust me that we have not done too many things wrong ;-) Christian Rößner -- Rößner-Network-Solutions Zertifizierter ITSiBe / CISO Karl-Bröger-Str. 10, 36304 Alsfeld Fax: +49 6631 78823409, Mobil: +49 171 9905345 USt-IdNr.: DE225643613, https://roessner.website PGP fingerprint: 658D 1342 B762 F484 2DDF 1E88 38A5 4346 D727 94E5

1 0

sieve duplicate with 2.3.16
by Jean-Max Reymond 13 May '24

13 May '24

Hi, I was running dovecot 2.3.7.2 with ubuntu 20.04 Lastweek, I upgrade to Ubuntu 22.04 and dovecot 2.3.16 My configuration was migrated and all is fine expected the sieve duplicate. It does notwork and i don't understand why. % doveconf -n # 2.3.16 (7e2e900c1a): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.16 (09c29328) managesieve(ubuntu): Debug: sieve: Pigeonhole version 0.5.16 (09c29328) initializing managesieve(ubuntu): Debug: sieve: include: sieve_global is not set; it is currently not possible to include `:global' scripts. # OS: Linux 5.15.0-105-generic x86_64 Ubuntu 22.04.4 LTS ext4 # Hostname: 2D17911.online-server.cloud auth_mechanisms = plain login first_valid_uid = 8 log_debug = category=sieve mail_fsync = never mail_location = maildir:/home/Mails/%u managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { sieve = ~/.dovecot.sieve sieve_before = /var/lib/dovecot/sieve/default.sieve sieve_dir = ~/sieve } postmaster_address = postmaster(a)ckr-solutions.com protocols = imap sieve service auth { unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } } service stats { unix_listener stats-writer { mode = 0666 } } ssl_cert = </etc/letsencrypt/live/mail.ckr-solutions.com/fullchain.pem ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM ssl_key = # hidden, use -P to show it userdb { driver = passwd } userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol imap { imap_client_workarounds = delay-newmail mail_max_userip_connections = 10 } protocol lmtp { mail_fsync = optimized } protocol lda { deliver_log_format = msgid=%m: %$ mail_fsync = optimized mail_plugins = sieve postmaster_address = postmaster(a)ckr-solutions.com quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r } protocol pop3 { mail_max_userip_connections = 10 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } trace dovecot for debug May 9 12:04:49 2D17911 postfix/qmgr[1855785]: DE15D396023E: from=<jmreymond(a)ik.me>, size=2313, nrcpt=3 (queue active) May 9 12:04:50 2D17911 amavis[2290921]: (2290921-01) Passed CLEAN {RelayedOpenRelay}, [185.125.25.11]:58641 [185.125.25.11] <jmreymond(a)ik.me> -> <jmreymond(a)ckr-solutions.com>,<testsieve(a)ckr-solutions.com>, Queue-ID: 91D2E3960097, Message-ID: <00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>, mail_id: lukXw6VSEsMW, Hits: -2.821, size: 1854, queued_as: DE15D396023E, dkim_sd=20200325:ik.me, 5242 ms May 9 12:04:50 2D17911 postfix/smtp[2292055]: 91D2E3960097: to=<jmreymond(a)ckr-solutions.com>, orig_to=<testsieve(a)ckr-solutions.com>, relay=127.0.0.1[127.0.0.1]:10024, delay=5.4, delays=0.16/0.01/0.09/5.2, dsn=2.0.0, status=sent (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as DE15D396023E) May 9 12:04:50 2D17911 postfix/smtp[2292055]: 91D2E3960097: to=<testsieve(a)ckr-solutions.com>, relay=127.0.0.1[127.0.0.1]:10024, delay=5.4, delays=0.16/0.01/0.09/5.2, dsn=2.0.0, status=sent (250 2.0.0 from MTA(smtp:[127.0.0.1]:10025): 250 2.0.0 Ok: queued as DE15D396023E) May 9 12:04:50 2D17911 postfix/qmgr[1855785]: 91D2E3960097: removed May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: Pigeonhole version 0.5.16 (09c29328) initializing May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: include: sieve_global is not set; it is currently not possible to include `:global' scripts. May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: file storage: Using active Sieve script path: /home/Mails/jmreymond(a)ckr-solutions.com/.dovecot.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: file storage: Using script storage path: /home/Mails/jmreymond(a)ckr-solutions.com//sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: file storage: Relative path to sieve storage in active link: sieve/ May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: file storage: Using Sieve script path: /home/Mails/jmreymond(a)ckr-solutions.com/.dovecot.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: file storage: Storage path `/home/Mails/jmreymond(a)ckr-solutions.com/.dovecot.sieve' not found May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: User has no active script in storage `/home/Mails/jmreymond(a)ckr-solutions.com/sieve' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: User has no personal script May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: file storage: Using Sieve script path: /var/lib/dovecot/sieve/default.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: file storage: script: Opened script `default' from `/var/lib/dovecot/sieve/default.sieve' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: Executed before user's personal Sieve script(1): /var/lib/dovecot/sieve/default.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: multi-script: Start execute sequence May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: Opening script 1 of 1 from `/var/lib/dovecot/sieve/default.sieve' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: Loading script /var/lib/dovecot/sieve/default.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: Script binary /var/lib/dovecot/sieve/default.svbin successfully loaded May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: binary /var/lib/dovecot/sieve/default.svbin: save: not saving binary, because it is already stored May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: Executing script from `/var/lib/dovecot/sieve/default.svbin' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: multi-script: Run script `/var/lib/dovecot/sieve/default.svbin' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: Started running script `/var/lib/dovecot/sieve/default.svbin' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: Finished running script `ok' (status=/var/lib/dovecot/sieve/default.svbin, resource usage: no usage recorded) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: multi-script: Execute result May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing result (status=ok, commit=no) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Starting execution of actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing duplicate_mark action (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing actions (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing result (no commit, status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: multi-script: Sequence active May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: multi-script: Finishing sequence (status=ok) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing result (status=ok, commit=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Starting execution of actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing actions (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Execute implicit keep (failure=no) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Start storing into mailbox INBOX May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing implicit keep action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Execute storing into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: Pigeonhole version 0.5.16 (09c29328) initializing May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: include: sieve_global is not set; it is currently not possible to include `:global' scripts. May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: file storage: Storage path `/home/Mails/testsieve(a)ckr-solutions.com//sieve' not found May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: file storage: Using Sieve script path: /home/Mails/testsieve(a)ckr-solutions.com/.dovecot.sieve May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: file storage: Storage path `/home/Mails/testsieve(a)ckr-solutions.com/.dovecot.sieve' not found May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: storage: No default script location configured May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: User has no personal script May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: file storage: Using Sieve script path: /var/lib/dovecot/sieve/default.sieve May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: file storage: script: Opened script `default' from `/var/lib/dovecot/sieve/default.sieve' May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: Executed before user's personal Sieve script(1): /var/lib/dovecot/sieve/default.sieve May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: multi-script: Start execute sequence May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: Opening script 1 of 1 from `/var/lib/dovecot/sieve/default.sieve' May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: Loading script /var/lib/dovecot/sieve/default.sieve May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: Script binary /var/lib/dovecot/sieve/default.svbin successfully loaded May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: binary /var/lib/dovecot/sieve/default.svbin: save: not saving binary, because it is already stored May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: Executing script from `/var/lib/dovecot/sieve/default.svbin' May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: multi-script: Run script `/var/lib/dovecot/sieve/default.svbin' May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: Started running script `/var/lib/dovecot/sieve/default.svbin' May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: Finished running script `ok' (status=/var/lib/dovecot/sieve/default.svbin, resource usage: no usage recorded) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: multi-script: Execute result May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing result (status=ok, commit=no) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Starting execution of actions May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing actions May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing duplicate_mark action (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing actions (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing result (no commit, status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: multi-script: Sequence active May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: multi-script: Finishing sequence (status=ok) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing result (status=ok, commit=yes) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Starting execution of actions May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing actions May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing actions (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Execute implicit keep (failure=no) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Start storing into mailbox INBOX May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing implicit keep action May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Execute storing into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: Pigeonhole version 0.5.16 (09c29328) initializing May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: include: sieve_global is not set; it is currently not possible to include `:global' scripts. May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: file storage: Using active Sieve script path: /home/Mails/jmreymond(a)ckr-solutions.com/.dovecot.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: file storage: Using script storage path: /home/Mails/jmreymond(a)ckr-solutions.com//sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: file storage: Relative path to sieve storage in active link: sieve/ May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: file storage: Using Sieve script path: /home/Mails/jmreymond(a)ckr-solutions.com/.dovecot.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: file storage: Storage path `/home/Mails/jmreymond(a)ckr-solutions.com/.dovecot.sieve' not found May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: User has no active script in storage `/home/Mails/jmreymond(a)ckr-solutions.com/sieve' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: User has no personal script May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: file storage: Using Sieve script path: /var/lib/dovecot/sieve/default.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: file storage: script: Opened script `default' from `/var/lib/dovecot/sieve/default.sieve' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: Executed before user's personal Sieve script(1): /var/lib/dovecot/sieve/default.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: multi-script: Start execute sequence May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: Opening script 1 of 1 from `/var/lib/dovecot/sieve/default.sieve' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: Loading script /var/lib/dovecot/sieve/default.sieve May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: Script binary /var/lib/dovecot/sieve/default.svbin successfully loaded May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: binary /var/lib/dovecot/sieve/default.svbin: save: not saving binary, because it is already stored May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: Executing script from `/var/lib/dovecot/sieve/default.svbin' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: multi-script: Run script `/var/lib/dovecot/sieve/default.svbin' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: Started running script `/var/lib/dovecot/sieve/default.svbin' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: Finished running script `ok' (status=/var/lib/dovecot/sieve/default.svbin, resource usage: no usage recorded) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: multi-script: Execute result May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing result (status=ok, commit=no) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Starting execution of actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing duplicate_mark action (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing actions (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing result (no commit, status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: multi-script: Sequence active May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: multi-script: Finishing sequence (status=ok) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing result (status=ok, commit=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Starting execution of actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing actions (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Execute implicit keep (failure=no) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Start storing into mailbox INBOX May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Executing implicit keep action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Execute storing into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Saving to mailbox 'INBOX' successful so far May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing implicit keep action (status=ok) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalizing actions May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalize duplicate_mark action (status=ok, action_status=ok, commit_status=ok, pre-commit=yes) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Commit duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished finalizing actions (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalize implicit keep (failure=no) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalize implicit keep action(status=ok, action_status=ok, commit_status=ok) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Commit implicit keep action May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Commit storing into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Saving to mailbox 'INBOX' successful so far May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Saving to mailbox 'INBOX' successful so far May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing implicit keep action (status=ok) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing implicit keep action (status=ok) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalizing actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalizing actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalize duplicate_mark action (status=ok, action_status=ok, commit_status=ok, pre-commit=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalize duplicate_mark action (status=ok, action_status=ok, commit_status=ok, pre-commit=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Commit duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Commit duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished finalizing actions (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished finalizing actions (status=ok, keep=implicit) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalize implicit keep (failure=no) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalize implicit keep (failure=no) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalize implicit keep action(status=ok, action_status=ok, commit_status=ok) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finalize implicit keep action(status=ok, action_status=ok, commit_status=ok) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Commit implicit keep action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Commit implicit keep action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Commit storing into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Commit storing into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: stored mail into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finish implicit keep action May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finishing actions May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finish duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing result (final, status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: multi-script: Sequence finished (status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(testsieve(a)ckr-solutions.com)<2292076></QcBAcKfPGZs+SIA4rRGvA>: Debug: sieve: multi-script: Destroy May 9 12:04:50 2D17911 postfix/pipe[2292073]: DE15D396023E: to=<testsieve(a)ckr-solutions.com>, relay=dovecot, delay=0.23, delays=0.09/0.01/0/0.13, dsn=2.0.0, status=sent (delivered via dovecot service) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: stored mail into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finish implicit keep action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finishing actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finish duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing result (final, status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: multi-script: Sequence finished (status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292074><fuflAMKfPGZq+SIA4rRGvA>: Debug: sieve: multi-script: Destroy May 9 12:04:50 2D17911 postfix/pipe[2292072]: DE15D396023E: to=<jmreymond(a)ckr-solutions.com>, relay=dovecot, delay=0.31, delays=0.09/0.01/0/0.22, dsn=2.0.0, status=sent (delivered via dovecot service) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: stored mail into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finish implicit keep action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finishing actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finish duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing result (final, status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: multi-script: Sequence finished (status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: multi-script: Destroy May 9 12:04:50 2D17911 postfix/pipe[2292075]: DE15D396023E: to=<jmreymond(a)ckr-solutions.com>, orig_to=<testsieve(a)ckr-solutions.com>, relay=dovecot, delay=0.35, delays=0.09/0.01/0/0.25, dsn=2.0.0, status=sent (delivered via dovecot service) May 9 12:04:50 2D17911 postfix/qmgr[1855785]: DE15D396023E: removed

1 1

Sieve: Avoiding duplicates in a folder while keeping in Inbox
by Nick Urbanik 13 May '24

13 May '24

Dear Folks, I am in the process of learning Sieve, and want to be able to keep an email in Inbox, while also keeping *one* copy in another folder. However, the same mail is copied from Inbox multiple times when I run sieve-filter -Wev .dovecot.sieve Inbox My attempt to prevent this fails: ... } elsif header :comparator "i;octet" :contains "From" "paypal(a)paypal.com.au" { if not duplicate { fileinto "paypal"; } keep; } Please can anyone enlighten me?

3 4

Re: Failing to archive many messages
by Francis Augusto Medeiros-Logeay 10 May '24

10 May '24

> On 9 May 2024, at 19:45, dovecot-request(a)dovecot.org wrote: > > Francis Augusto Medeiros-Logeay via dovecot skrev den 2024-05-09 12:29: > >>> If you want to analyze emails, why not do it with scheduled crons >>> after they are archived? > > maybe ask for skip older then one day in here > https://github.com/isbg/isbg/tree/master > > while roundcube just set the needed flag for retest ? > >> wouldn't it reanalyze all archived messages anyway? > > sometimes email is ham at recpt stage, while its spam later on test, > this is why isbg is made imho :) I see. But I wonder if there is something wrong with what I already have. It worked fine for years, and it works fine for most of my users. I tested with a few accounts, and Archving (with its sa-learn script) works blazingly fast. But with one user - happens to be mine - it is super slow when archiving, most likely due the sa-learn. Best, Francis

1 0

Authentication questions
by Francis Augusto Medeiros-Logeay 09 May '24

09 May '24

Hi, I was wondering: 1 - Is it possible to configure authentication methods per user? For example, oauth2 for most users, but plain for others? 2 - I had a feeling that when oauth2 authentication fails, dovecot tries to authenticate via plain with the received token. Doesn’t seem logical, but I get my user blocked on my directory server (freeipa) after a few failed oath authentications. If so, can this be prevented? Best, Francis

3 4

Re: Failing to archive many messages
by Francis Augusto Medeiros-Logeay 09 May '24

09 May '24

> On 9 May 2024, at 12:55, dovecot-request(a)dovecot.org wrote: > > Francis Augusto Medeiros-Logeay via dovecot skrev den 2024-05-09 11:28: > >> Actually, I don’t know here if that’s the sieve that’s slowing down the >> process, or if it is something else. >> I see that yeah, sa-learn takes a little while to execute. But maybe >> the issue is that Dovecot doesn’t seem to >> release the IMAP connection until each message went through sieve. This >> gives me some timeout on >> Roundcube (it says just «server error»). All the messages are indeed >> archived. >> >> Is that something here I could do better? > > use tmpfs to store tmp content, or try solve it without pipe with imho > creates tmp files > > https://doc.dovecot.org/configuration_manual/howto/antispam_with_sieve/ > > try spamc Thanks Benny. Using spamc and sa-learn isn’t a bit the same? But I’ll check the docs. Bestm Francis

1 0

Re: Failing to archive many messages
by Francis Augusto Medeiros-Logeay 09 May '24

09 May '24

I noticed that my sieve rules are taking a very long time when archiving messages. I can see on my logs that every message takes about two-three seconds to be evaluated. My sieve for the Archive is this: cat /var/mail/vmail/mail/sieve/global/report-ham.sieve require ["vnd.dovecot.pipe", "copy", "imapsieve", "environment", "variables"]; if environment :matches "imap.mailbox" "*" { set "mailbox" "${1}"; } if string "${mailbox}" "Trash" { stop; } if environment :matches "imap.user" "*" { set "username" "${1}"; } pipe :copy "sa-learn-ham.sh" [ "${username}" ]; And my sa-learn-ham.sh is this: #!/bin/sh export PATH="/usr/sbin:/usr/bin:/usr/local/bin:/usr/local/sbin:$PATH" exec /usr/bin/sa-learn -u ${1} —ham May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: multi-script: Start execute sequence May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: Executing script from `/var/mail/vmail/mail/sieve/global/report-ham.svbin' May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: multi-script: Run script `/var/mail/vmail/mail/sieve/global/report-ham.svbin' May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: Started running script `/var/mail/vmail/mail/sieve/global/report-ham.svbin' May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: Finished running script `ok' (status=/var/mail/vmail/mail/sieve/global/report-ham.svbin, resource usage: no usage recorded) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: multi-script: Execute result May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Executing result (status=ok, commit=no) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Starting execution of actions May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Executing actions May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Executing pipe action May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: action pipe: running program: sa-learn-ham.sh May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh: Created May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh: Pass environment: USER=francis(a)med-lo.eu May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh: Pass environment: HOME=/var/mail/vmail/med-lo.eu/francis May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh: Pass environment: HOST=fb58607074fd May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: Mailbox Archive: UID 191458: Opened mail because: mail stream May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Finished executing pipe action (status=ok, keep=implicit) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Finished executing actions (status=ok, keep=implicit) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Finished executing result (no commit, status=ok, keep=yes) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: multi-script: Sequence active May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: multi-script: Finishing sequence (status=ok) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Executing result (status=ok, commit=yes) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Starting execution of actions May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Executing actions May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Finished executing actions (status=ok, keep=implicit) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Execute implicit keep (failure=no) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Start storing into mailbox Archive May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Executing implicit keep action May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Execute storing into mailbox 'Archive' May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Updated existing mail in mailbox 'Archive' May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Finished executing implicit keep action (status=ok) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Finalizing actions May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Finalize pipe action (status=ok, action_status=ok, commit_status=ok, pre-commit=yes) May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: sieve: uid=191458: Commit pipe action May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh: Establishing connection May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh: Forked child process May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh (9354): Connected to program May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh (9354): Finished streaming payload to program May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh (9354): Finished input to program May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh (9354): Disconnected May 09 09:17:10 imap(francis(a)med-lo.eu)<9349><4gm6NAAYsagKCige>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh (9354): Waiting for program to finish after 4 msecs (timeout = 9996 msecs) I also noticed this happens for a few accounts. Do you know what could be causing this? Best, Francis

3 4

sieve duplicate with 2.3.16
by Jean-Max Reymond 09 May '24

09 May '24

Hi, I was running dovecot 2.3.7.2 with ubuntu 20.04 Lastweek, I upgrade to Ubuntu 22.04 and dovecot 2.3.16 My configuration was migrated and all is fine expected the sieve duplicate. It does notwork and i don't understand why. % doveconf -n # 2.3.16 (7e2e900c1a): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.16 (09c29328) managesieve(ubuntu): Debug: sieve: Pigeonhole version 0.5.16 (09c29328) initializing managesieve(ubuntu): Debug: sieve: include: sieve_global is not set; it is currently not possible to include `:global' scripts. # OS: Linux 5.15.0-105-generic x86_64 Ubuntu 22.04.4 LTS ext4 # Hostname: 2D17911.online-server.cloud auth_mechanisms = plain login first_valid_uid = 8 log_debug = category=sieve mail_fsync = never mail_location = maildir:/home/Mails/%u managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { sieve = ~/.dovecot.sieve sieve_before = /var/lib/dovecot/sieve/default.sieve sieve_dir = ~/sieve } postmaster_address = postmaster(a)ckr-solutions.com protocols = imap sieve service auth { unix_listener /var/spool/postfix/private/dovecot-auth { group = postfix mode = 0660 user = postfix } } service stats { unix_listener stats-writer { mode = 0666 } } ssl_cert = </etc/letsencrypt/live/mail.ckr-solutions.com/fullchain.pem ssl_cipher_list = ALL:!LOW:!SSLv2:ALL:!aNULL:!ADH:!eNULL:!EXP:RC4+RSA:+HIGH:+MEDIUM ssl_key = # hidden, use -P to show it userdb { driver = passwd } userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol imap { imap_client_workarounds = delay-newmail mail_max_userip_connections = 10 } protocol lmtp { mail_fsync = optimized } protocol lda { deliver_log_format = msgid=%m: %$ mail_fsync = optimized mail_plugins = sieve postmaster_address = postmaster(a)ckr-solutions.com quota_full_tempfail = yes rejection_reason = Your message to <%t> was automatically rejected:%n%r } protocol pop3 { mail_max_userip_connections = 10 pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } trace dovecot for debug ... May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: stored mail into mailbox 'INBOX' May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finish implicit keep action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finishing actions May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finish duplicate_mark action May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: msgid=<00fb2844-f7b0-47af-8684-bcb090ec9cb9(a)ik.me>: Finished executing result (final, status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: multi-script: Sequence finished (status=ok, keep=yes) May 9 12:04:50 2D17911 dovecot: lda(jmreymond(a)ckr-solutions.com)<2292077><8XgtAcKfPGZt+SIA4rRGvA>: Debug: sieve: multi-script: Destroy May 9 12:04:50 2D17911 postfix/pipe[2292075]: DE15D396023E: to=<jmreymond(a)ckr-solutions.com>, orig_to=<testsieve(a)ckr-solutions.com>, relay=dovecot, delay=0.35, delays=0.09/0.01/0/0.25, dsn=2.0.0, status=sent (delivered via dovecot service) May 9 12:04:50 2D17911 postfix/qmgr[1855785]: DE15D396023E: removed

1 0

Re: Failing to archive many messages
by Francis Augusto Medeiros-Logeay 09 May '24

09 May '24

> I noticed that my sieve rules are taking a very long time when archiving messages. I can see on my logs that every message takes about two-three seconds to be evaluated. > > I also noticed this happens for a few accounts. Do you know what could be causing this? > > Best, > Francis > Actually, I don’t know here if that’s the sieve that’s slowing down the process, or if it is something else. I see that yeah, sa-learn takes a little while to execute. But maybe the issue is that Dovecot doesn’t seem to release the IMAP connection until each message went through sieve. This gives me some timeout on Roundcube (it says just «server error»). All the messages are indeed archived. Is that something here I could do better? Best, Francis

2 1

OAUTH2 problem when migrating to Ubuntu 24.04
by Francis Augusto Medeiros-Logeay 09 May '24

09 May '24

Hi, I have a Dovecot server on Ubuntu 22.04, which works fine with Oauth2. I am building a new container based on Ubuntu 24.04. IMAP seems to work fine with plain authentication, but oauth2 fails (Dovecot v2.3.21). Same configuration as before. However, I got this message: May 09 09:41:57 auth: Error: oauth2(fran(a)mydomain.eu,10.110.41.32,<o+TCjQZZYJAaaige>): oauth2 failed: Introspection failed: No username returned Weird, as it does indeed seems to get the username (as seen on the log). Any clue on why this fails? Best, Francis

2 2

Namespace configuration for archive in different storage
by drinaldi＠trustitalia.it 06 May '24

06 May '24

Hello, i made this namespace configuration inside "10-mail.conf": namespace Archives { type = private disabled = no hidden = no list = yes ignore_on_failure = no inbox = no location = maildir:/mnt/archive-mail-storage/%n/Maildir prefix = "Archive." subscriptions = yes separator = . I need to set up the storage for archive on a different storage than the inbox is located. Thunderbird, now seems that can see the subfolders inside the archive that start with dot but cannot access the "cur" folder where inbox mail are stored. Can you help me?

3 3

Password storage
by Rupert Gallagher 06 May '24

06 May '24

What is dovecot's state of the art on password storage? Can we use bcrypt instead of plain text?

3 2

Pigeonhole : how to automatically subscribe to newly created folders
by Erwan David 06 May '24

06 May '24

Hello, In my sieve script I use fileinto :create "mailbox" Is it possible that the created mailbox is then automatically added to the subsccribe list for the account ? -- Erwan David

1 0

RE: temporary auth errors
by Michael Slusarz 02 May '24

02 May '24

> On 05/02/2024 7:48 AM MDT Marc via dovecot <dovecot(a)dovecot.org> wrote: > > > auth_failure_delay = 2 secs ? > > > > That will still simply wait before *rejecting* the login, compared to > > *dropping the connection*. > > > > We are thus looking for three different behaviours: > > > > 1. If backend confrims auth, ACK auth + proceed (grant access) to email. > > > > 2. If backend confirm "no such user" or "invalid creds", wait for > > auth_failure_delay and then *reject* the login. > > > > 3. If the backend fails (ie, can neither confirm nor deny), simply drop > > the connection. > > > > I hope this is more clear. > > > > Yes that is more clear, but no idea (seems a little out of scope to support by design) In complicated, localized authentication scenarios, Lua auth is likely the best answer. https://doc.dovecot.org/configuration_manual/authentication/lua_based_authe… michael

1 0

temporary auth errors
by Jaco Kroon 02 May '24

02 May '24

Hi All, Looking for some advise. We ran into a situation yesterday where our SQL cluster (mariadb-galera) stopped serving requests due to some DDL queries locking the wsrep provider. We're addressing this separately, so just background as to the cause of the problem. As far as I know both POP3 and IMAP protocols only have two possible responses when a user tries to authenticate, either ACK (yes, you're fine let's proceed) and NACK (no, something with authentication failed, and either you've got credential issues, or something is wrong with the backend). An ACK results in granting the user access. A NACK results in the user having to retry. This is all good and well, but the *typical* response by a MUA is to re-prompt the user for credentials, to which the response is usually to retry random passwords until it works again (confirmed with Outlook and Thunderbird). What I'm hoping is that dovecot has some way to in case of such "authentication backend" problem scenarios to ignore protocol and politeness and simply disconnect the client, ie, just shut the connection without saying anything, this could even be with a small delay (I'd say 1 second or so, just to avoid tight auth retry loops, up to 4 or 5 seconds IMHO would be fine). The hope is that this will result in the mail client treating this like a connection error rather than an authentication error, and hopefully not prompt for new credentials, but simply an alert of the "there has been a problem communicating with your mail server please retry or contact your service provider" kind of error messages. For reference, the errors in dovecot logs looks like: May 1 04:42:25 uriel dovecot[352]: auth-worker(11615): Warning: sqlpool(mysql): Query failed, retrying: WSREP has not yet prepared node for application use May 1 04:42:25 uriel dovecot[352]: auth-worker(11615): Error: conn unix:auth-worker (pid=11453,uid=76): auth-worker<68>: sql(user(a)domain,a.b.c.d,<XXXX>): Password query failed: WSREP has not yet prepared node for application use May 1 04:42:27 uriel dovecot[352]: pop3-login: Disconnected: Aborted login by logging out (auth service reported temporary failure): user=<user@domain>, method=PLAIN, rip=a.b.c.d, lip=e.f.g.h, TLS, session=<XXXX> Kind regards, Jaco

2 3

Re: Failing to archive many messages
by Francis Augusto Medeiros-Logeay 01 May '24

01 May '24

It is weird. At first, it seems that the logs are going fine. It goes like this for many minutes: May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: Mailbox Archive: UID 25719: Looked up field hdr.IN-REPLY-TO from mail cache May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: Mailbox Archive: UID 25719: Looked up field hdr.MESSAGE-ID from mail cache May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: Mailbox Archive: UID 25719: Looked up field hdr.SUBJECT from mail cache May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: Mailbox Archive: UID 25719: Looked up field hdr.TO from mail cache May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: Mailbox Archive: UID 25719: Looked up field hdr.X-PRIORITY from mail cache May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: Mailbox Archive: UID 25719: Looked up field hdr.BCC from mail cache May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: Mailbox Archive: UID 25719: Looked up field hdr.REPLY-TO from mail cache May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: Mailbox Archive: UID 25719: Looked up field hdr.DISPOSITION-NOTIFICATION-TO from mail cache May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: Mailbox Archive: UID 25719: Looked up field hdr.LIST-POST from mail cache May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: multi-script: Start execute sequence May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: Executing script from `/var/mail/vmail/mail/sieve/global/report-ham.svbin' May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: multi-script: Run script `/var/mail/vmail/mail/sieve/global/report-ham.svbin' May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: Started running script `/var/mail/vmail/mail/sieve/global/report-ham.svbin' May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: Finished running script `ok' (status=/var/mail/vmail/mail/sieve/global/report-ham.svbin, resource usage: no usage recorded) May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: multi-script: Execute result May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Executing result (status=ok, commit=no) May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Starting execution of actions May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Executing actions May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Executing pipe action May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: action pipe: running program: sa-learn-ham.sh May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh: Created May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh: Pass environment: USER=francis(a)mydomain.com May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh: Pass environment: HOME=/var/mail/vmail/med-lo.eu/francis May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh: Pass environment: HOST=fb58607074fd May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: Mailbox Archive: UID 25719: Opened mail because: mail stream May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Finished executing pipe action (status=ok, keep=implicit) May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Finished executing actions (status=ok, keep=implicit) May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Finished executing result (no commit, status=ok, keep=yes) May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: multi-script: Sequence active May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: multi-script: Finishing sequence (status=ok) May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Executing result (status=ok, commit=yes) May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Starting execution of actions May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Executing actions May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Finished executing actions (status=ok, keep=implicit) May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Execute implicit keep (failure=no) May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Start storing into mailbox Archive May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Executing implicit keep action May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Execute storing into mailbox 'Archive' May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Updated existing mail in mailbox 'Archive' May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Finished executing implicit keep action (status=ok) May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Finalizing actions May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Finalize pipe action (status=ok, action_status=ok, commit_status=ok, pre-commit=yes) May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: sieve: uid=25719: Commit pipe action May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh: Establishing connection May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh: Forked child process May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh (416): Connected to program May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh (416): Finished streaming payload to program May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh (416): Finished input to program May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh (416): Disconnected May 01 14:20:04 imap(francis(a)mydomain.com)<226><zNW3d2MX9uku45qA>: Debug: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh (416): Waiting for program to finish after 6 msecs (timeout = 9994 msecs) The client stays just like «Moving 1 of 4000 messages». Then the logs start to go like this: May 01 14:43:09 imap: Error: ERROR: the Bayes learn function returned an error, please re-run with -D for more information at /usr/bin/sa-learn line 500. May 01 14:43:12 imap: Error: ERROR: the Bayes learn function returned an error, please re-run with -D for more information at /usr/bin/sa-learn line 500. ^C root@fb58607074fd:/# tail -f /var/log/dovecot.log | grep Error May 01 14:43:15 imap: Error: plugin: eval failed: interrupted at /usr/bin/sa-learn line 513. May 01 14:43:15 imap: Error: ERROR: the Bayes learn function returned an error, please re-run with -D for more information at /usr/bin/sa-learn line 500. May 01 14:43:15 imap(francis(a)mydomain.com)<295><TwG1fGMXCuou45qA>: Error: sieve: failed to pipe message to program `sa-learn-ham.sh': refer to server log for more information. [2024-05-01 14:43:15] May 01 14:43:15 imap(francis(a)mydomain.com)<295><TwG1fGMXCuou45qA>: Error: sieve: Execution of script /var/mail/vmail/mail/sieve/global/report-ham.sieve failed May 01 14:43:16 imap(francis(a)mydomain.com)<292><Ei2ofGMXBeou45qA>: Error: program exec:/var/mail/vmail/mail/sieve/global/scripts/sa-learn-ham.sh (2978): Forcibly terminated with signal 15 May 01 14:43:16 imap(francis(a)mydomain.com)<292><Ei2ofGMXBeou45qA>: Error: sieve: failed to pipe message to program `sa-learn-ham.sh': refer to server log for more information. [2024-05-01 14:43:16] May 01 14:43:16 imap(francis(a)mydomain.com)<292><Ei2ofGMXBeou45qA>: Error: sieve: Execution of script /var/mail/vmail/mail/sieve/global/report-ham.sieve failed May 01 14:43:17 imap: Error: plugin: eval failed: interrupted at /usr/bin/sa-learn line 513. May 01 14:43:17 imap: Error: ERROR: the Bayes learn function returned an error, please re-run with -D for more information at /usr/bin/sa-learn line 500. For many minutes, the mail client gets an error about reaching the max connections from ip, and the logs go on and on with the errors above. What could be the issue? Best, Francis -- Francis Augusto Medeiros-Logeay Oslo, Norway

1 0

ENV{"PATH"}. errors on my log
by Francis Augusto Medeiros-Logeay 01 May '24

01 May '24

Hi, I'm getting this error a lot on my logs: May 01 12:57:03 imap: Error: Use of uninitialized value $ENV{"PATH"} in split at /usr/lib/x86_64-linux-gnu/perl-base/File/Spec/Unix.pm line 136. I googled a bit and the only reference I found was related to the possibility of imapsieve scripts that could be generating this. I haven't found any perl script on my install, but I momentarily turned off spamassassin, but the logs continued. Any hint on how I can debug this? Turning the debug logs on dovecot didn't bring me any extra information of what the source of this could be. Best, Francis -- Francis Augusto Medeiros-Logeay Oslo, Norway

2 2

Failing to archive many messages
by Francis Augusto Medeiros-Logeay 01 May '24

01 May '24

Hi, When I archive one or two messages, the messages are correctly moved to the Archive. However, when I archive more messages - like 50 or more, dovecot seems to fail. The error I get is this one: Warning: Failed to do incremental sync for mailbox Archive, retry with a full sync (Modseq 17277 no longer in transaction log (highest=17323, last_common_uid=12216, nextuid=15767)) No messages end up being moved to the Archive folder. I tried to do this both from a mail client and from roundcube. What could be the problem here?

1 0

Dovecot, migrating mailboxes from old to new server and from old to new format?
by David Mehler 01 May '24

01 May '24

Hello, I've got a task to migrate a Dovecot mailstore, mailboxes, public folders, etc from an older server (it runs Dovecot 2.2.x) to a new server (running Dovecot 2.3.x). At the same time I'm needing to change mailbox storage formats, going from Mbox (on old server) to Maildir (on new server). I'm not sure if any of the mailboxes are compressed with zlib or encrypted, there's a lot of them, is there a way to find out compression or encryption and decompress/decrypt them prior to migration? Suggestions welcome. Thanks. Dave. -- Sent from Mozilla Thunderbird 91.13.1

2 1