- dovecot - dovecot.org

help
by Bhushan Bhosale 20 Apr '17

20 Apr '17

Dear Team I have faced issue with email downloading in the email client by using pop3 SSL port 995 in dovecot v2.1.17 for outlook client 2016 on production environment. As per my troubleshooting on my test environment, I have upgraded dovecot version v2.2.28, and changed paramer "ssl_dh_parameters_length = 2048" and "verbose_ssl = yes", The issue seems to be resolved in dovecot v2.2.28. What can i do to resolve this issue in dovecot v2.1.17 in Production environment? Kindly help. Thanks a lot in advance. Regards, Bhushan Bhosale

4 3

my domain in both my destination and virtual_mailbox_domains?
by Michael Segel 20 Apr '17

20 Apr '17

I’m doing a new dovecot mail server for my domain. Here’s yet another thing I mucked up. I wanted to set up virtual mailboxes. One reason was that I wanted to set up virtual users for the domain so I don’t need to create user accounts just mail accounts. I followed one of the many examples / tutorials out there and I end up with the following warning message. postfix/trivial-rewrite[8818]: warning: do not list domain <machine>.<domain>.com in BOTH mydestination and virtual_mailbox_domains I checked my configuration, I don’t see where I’ve set up anything for mydestination in postfix. I’m trying to work thru the log file issues that I can find… this is just one more. To add to the confusion, I’m using webmin as my server admin UI to make life easier… yet it seems to much things up a bit Any suggestions? Thx -Mike

4 3

[Configuration question] Shared Folders: sql dict - missing information
by dovecot＠avv.solutions 19 Apr '17

19 Apr '17

Hello Community, I have implemented shared folders/acl using the 'file' driver sucessfully. Now, I want to move the shared folders information to my sql DB where I have moved all user/nets/quota information. I have read carefully the documentation (https://wiki.dovecot.org/SharedMailboxes/Shared) but, as far as I can see, only the $to and $from (+ dummy) are handled in the DB? I was expecting the same granularity (per folder + explicit rights) than found using the actual solution. Did I miss something? Or how should I implement this? (Running version 2.2.13) Than you already for your help and feedback. Cheers, A

2 1

Extension record update for invalid uid=
by Luca Bertoncello 18 Apr '17

18 Apr '17

Hi list yesterday I got many of these errors: Error: Log synchronization error at seq=832,offset=2348 for indexes/.INBOX/dovecot.index: Extension record update for invalid uid=29175 But just for __ONE__ user. I couldn't find any misconfiguration for this user, it's just all other... Can someone say what it happens and how can I fix it? Thanks Luca Bertoncello (lucabert(a)lucabert.de)

1 0

v2.2.29.1 released
by Timo Sirainen 17 Apr '17

17 Apr '17

https://dovecot.org/releases/2.2/dovecot-2.2.29.1.tar.gz https://dovecot.org/releases/2.2/dovecot-2.2.29.1.tar.gz.sig Mainly because I had missed one cherry-pick from the release, which caused unit tests to also fail. And I didn't notice that, because make distcheck had been broken for some years now when it ran clang static analyzer, although I had assumed it would have run make check already before it failed.. On a related note, we're looking for a test engineer :) http://avoimettyopaikat.monster.fi/v2/job/View?JobID=182881783 - imapc reconnection fix was forgotten from 2.2.29 release, which also made "make check" fail in a unit test - dict-sql: Merging multiple UPDATEs to a single statement wasn't actually working. - Fixed building with vpopmail

5 5

Re: several misc questions, public folders and sharing, quota, ssl
by Aki Tuomi 16 Apr '17

16 Apr '17

Please keep responses on the list. Thank you. =) Without ACL plugin there is no way to restrict access, it's free for all. my site is a very tiny few user site, but ... auth_mechanisms = login plain mail_attribute_dict = file:%h/Mail/dovecot-attributes mail_location = sdbox:~/Mail mail_plugins = stats quota fts fts_lucene namespace inbox { inbox = yes list = yes location = mailbox Drafts { special_use = \Drafts } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Spam { auto = subscribe special_use = \Junk } mailbox Trash { special_use = \Trash } prefix = separator = . subscriptions = yes type = private } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { fts = lucene fts_lucene = whitespace_chars=@. imapsieve_mailbox1_before = file:/usr/lib/dovecot/sieve/report-spam.sieve imapsieve_mailbox1_causes = COPY imapsieve_mailbox1_name = Spam imapsieve_mailbox2_before = file:/usr/lib/dovecot/sieve/report-ham.sieve imapsieve_mailbox2_causes = COPY imapsieve_mailbox2_from = Spam imapsieve_mailbox2_name = * quota = count:User quota quota_vsizes = yes recipient_delimiter = + sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_extensions = +notify +imapflags sieve_global_extensions = +vnd.dovecot.pipe +vnd.dovecot.execute sieve_pipe_bin_dir = /usr/lib/dovecot/sieve sieve_plugins = sieve_imapsieve sieve_extprograms stats_refresh = 30 } protocols = imap lmtp service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } user = $default_internal_user } service doveadm { inet_listener http { address = 127.0.0.1 port = 38080 } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } service lmtp { inet_listener lmtp { address = 127.0.0.1 port = 8025 } } service stats { fifo_listener stats-mail { mode = 0666 } } ssl = required ssl_cert = # ssl_cipher_list = ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES256-SHA:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-RSA-AES128-SHA:DHE-RSA-AES256-SHA256:DHE-RSA-AES128-SHA:ECDHE-RSA-DES-CBC3-SHA:EDH-RSA-DES-CBC3-SHA:AES256-GCM-SHA384:AES256-SHA256:AES256-SHA:AES128-SHA ssl_dh_parameters_length = 4096 ssl_key = # ssl_prefer_server_ciphers = yes ssl_protocols = !SSLv2 !SSLv3 submission_host = 127.0.0.1:25 userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol imap { mail_plugins = stats quota fts fts_lucene imap_stats imap_sieve } protocol lmtp { mail_plugins = stats quota fts fts_lucene sieve } protocol lda { mail_plugins = stats quota fts fts_lucene sieve } Aki > On April 14, 2017 at 7:21 PM David Mehler <dave.mehler(a)gmail.com> wrote: > > > Hello Aki, > > Thank you for your reply. > > I've implemented your changes and thanks for the @STRENGTH reminder, I > had forgotten about that one. > > I'll check out the acl plugin. Is it required when sharing a public > folder or are public folders usable by all? I know it is for shared > folders. > > The TestFolder1 is still not showing up in public not sure why > everything looks good. > > My configuration was migrated from 2.0 to 2.1 then 2.2, various ports > along the way. > > I was wondering if I could take a look at your dovecot configuration > files and a doveconf -n output? > > Thanks. > Dave. > > > On 4/14/17, Aki Tuomi <aki.tuomi(a)dovecot.fi> wrote: > > > >> On April 14, 2017 at 3:04 AM David Mehler <dave.mehler(a)gmail.com> wrote: > >> > >> > >> Hello, > >> > >> I'm running dovecot 2.29 on a freebsd 10.3 system. I'm wanting to > >> optimize how the system is running and have a few misc questions. > >> > >> First ssl, is my cipher list good? I'm trying for pfs and wanting to > >> ensure these cipherlist is appropriate: > >> > >> ssl_cipher_list = EECDH+AESGCM:EDH+AESGCM:AES256+EECDH:AES256+EDH > >> > > > > I would add @STRENGTH to the end, so it'll get sorted by strengthness. > > > >> Next, a new feature that I'm trying for is virtual folders that store > >> All messages. My understanding of this is that it stores a version of > >> every received message in one place? I've got the virtual plugin > >> loaded and have: > >> > >> mailbox virtual/All { > >> comment = All my messages > >> special_use = \All > >> } > >> > >> I've got a directory /home/vmail/example.com/username/virtual under > >> which is an ALL folder both directories are accessible to the vmail > >> user, yet there's no contents in this folder and it's showing up > >> nowhere. > >> > > > > Configuring virtual all folder: > > > > namespace { > > prefix = virtual > > location = virtual:/etc/dovecot/virtual:INDEX=%h/virtual > > comment = All my messages > > special_use = \All > > mailbox All { > > auto = subscribe > > } > > } > > > > ==== /etc/dovecot/virtual/All/dovecot-virtual ==== > > * > > all > > ==== EOF === > > > >> Next, quota warnings, are not being sent at all. I set up a testuser > >> with a quota of 2 mb, then sent a message to that user getting the box > >> to 95% full, and no message. Took the user overquota with the next > >> message, still nothing, and a third message did trigger my custom > >> quota exceeded message and the message was bounced. > >> > > > > I would recommend you using > > > > mail_plugins = $mail_plugins quota quota_clone > > > > plugin { > > quota = count:User quota > > quota_clone_dict = proxy::sqlquota > > quota_vsizes = true > > } > > > > Also, > > > > "Note that the warning is ONLY executed at the exact time when the limit is > > being crossed, so when you're testing it you have to do it by crossing the > > limit by saving a new mail. If something else besides Dovecot updates quota > > so that the limit is crossed, the warning is never executed." > > > >> I'm wanting to implement public folders. My mailboxes are all > >> virtual, and they are stored under /home/vmail/example.com/username > >> and /home/vmail/example.org/username in the maildir format. I've got > >> one user uid and gid of 999 name of vmail who owns all the mailboxes. > >> I've separated out public folders storing them under > >> /home/vmail/public. I've created one mailbox called TestFolder and > >> new, cur, and tmp directories under it. This is what it looks like: > > > > <snip /> > > > >> The public/TestFolder is showing up fine and I can switch to it. The > >> public/TestFolder1 is not showing up at all so I'm not seeing it and > >> can't switch to it. Any ideas? > >> > > > > Not sure why it's not showing up, *but*, you could add :INDEXPVT=%h/public > > to the folder, to keep per-user indexes separate. > > > >> My second question involves public folders and domain sharing. Are > >> public folders accessible to all users and all domains? I've got two > >> domains example.com and example.org i'd like to create a folder that > >> some users in example.com can share with some users in example.org, > >> not necessarily all users in those domains should be able to see the > >> folders. > >> > > > > Dovecot does not, as per such, care about your domains. It cares about user > > names. If you want to do this kind of thing, please consult ACL plugin. > > https://wiki2.dovecot.org/ACL > > > >> Ideas welcome. > >> > >> Thanks. > >> Dave. > >> > > > > Some other comments, if you are using SSL, you can drop cram-md5 as auth > > mech, it's not storage-safe. > > > > you should use mail_location = maildir:~/maildir:LAYOUT=fs > > > > to avoid your other things in user's home being interprepted as mail > > directories. > > > > why are you setting these? > > maildir_broken_filename_sizes = yes > > maildir_empty_new = yes > > maildir_very_dirty_syncs = yes > > > > and in general I see lots of overconfiguring, dovecot defaults are usually > > right, and setting various things just for the fun of it, can cause > > problems. > > > > Aki > >

3 3

several misc questions, public folders and sharing, quota, ssl
by David Mehler 15 Apr '17

15 Apr '17

Hello, I'm running dovecot 2.29 on a freebsd 10.3 system. I'm wanting to optimize how the system is running and have a few misc questions. First ssl, is my cipher list good? I'm trying for pfs and wanting to ensure these cipherlist is appropriate: ssl_cipher_list = EECDH+AESGCM:EDH+AESGCM:AES256+EECDH:AES256+EDH Next, a new feature that I'm trying for is virtual folders that store All messages. My understanding of this is that it stores a version of every received message in one place? I've got the virtual plugin loaded and have: mailbox virtual/All { comment = All my messages special_use = \All } I've got a directory /home/vmail/example.com/username/virtual under which is an ALL folder both directories are accessible to the vmail user, yet there's no contents in this folder and it's showing up nowhere. Next, quota warnings, are not being sent at all. I set up a testuser with a quota of 2 mb, then sent a message to that user getting the box to 95% full, and no message. Took the user overquota with the next message, still nothing, and a third message did trigger my custom quota exceeded message and the message was bounced. I'm wanting to implement public folders. My mailboxes are all virtual, and they are stored under /home/vmail/example.com/username and /home/vmail/example.org/username in the maildir format. I've got one user uid and gid of 999 name of vmail who owns all the mailboxes. I've separated out public folders storing them under /home/vmail/public. I've created one mailbox called TestFolder and new, cur, and tmp directories under it. This is what it looks like: ls -la /home/vmail/public total 24 drwx------ 4 vmail vmail 512 Apr 13 18:23 ./ drwx------ 8 vmail vmail 512 Mar 15 10:34 ../ drwxr-xr-x 5 vmail vmail 512 Apr 13 18:16 TestFolder/ drwxr-xr-x 5 vmail vmail 512 Apr 13 18:25 TestFolder1/ -rw------- 1 vmail vmail 8 Apr 13 18:15 dovecot-uidvalidity -r--r--r-- 1 vmail vmail 0 Apr 13 18:15 dovecot-uidvalidity.58eff89a -rw------- 1 vmail vmail 688 Apr 13 18:24 dovecot.list.index.log ls -la /home/vmail/public/TestFolder total 28 drwxr-xr-x 5 vmail vmail 512 Apr 13 18:16 ./ drwx------ 4 vmail vmail 512 Apr 13 18:23 ../ drwxr-xr-x 2 vmail vmail 512 Apr 13 18:13 cur/ -rw-r--r-- 1 vmail vmail 51 Apr 13 18:16 dovecot-uidlist -rw-r--r-- 1 vmail vmail 304 Apr 13 18:16 dovecot.index.log drwxr-xr-x 2 vmail vmail 512 Apr 13 18:13 new/ drwxr-xr-x 2 vmail vmail 512 Apr 13 18:13 tmp/ ls -la /home/vmail/public/TestFolder1 total 20 drwxr-xr-x 5 vmail vmail 512 Apr 13 18:25 ./ drwx------ 4 vmail vmail 512 Apr 13 18:23 ../ drwxr-xr-x 2 vmail vmail 512 Apr 13 18:25 cur/ drwxr-xr-x 2 vmail vmail 512 Apr 13 18:25 new/ drwxr-xr-x 2 vmail vmail 512 Apr 13 18:25 tmp/ The public/TestFolder is showing up fine and I can switch to it. The public/TestFolder1 is not showing up at all so I'm not seeing it and can't switch to it. Any ideas? My second question involves public folders and domain sharing. Are public folders accessible to all users and all domains? I've got two domains example.com and example.org i'd like to create a folder that some users in example.com can share with some users in example.org, not necessarily all users in those domains should be able to see the folders. Ideas welcome. Thanks. Dave. doveconf -n # 2.2.29 (13ebc01): /usr/local/etc/dovecot/dovecot.conf # Pigeonhole version 0.4.18 (29cc74d) # OS: FreeBSD 10.3-RELEASE-p11 amd64 ufs auth_cache_size = 8 k auth_default_realm = example.com auth_mechanisms = plain login cram-md5 auth_realms = example.com example.org auth_socket_path = /var/run/dovecot/auth-userdb dict { sqlquota = mysql:/usr/local/etc/dovecot/dovecot-dict-sql.conf.ext } disable_plaintext_auth = no first_valid_gid = 999 first_valid_uid = 999 hostname = mail.example.com imap_client_workarounds = delay-newmail tb-extra-mailbox-sep tb-lsub-flags last_valid_gid = 999 last_valid_uid = 999 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes listen = 127.0.0.1 xxx.xxx.xxx.xxx mail_fsync = never mail_gid = vmail mail_home = /home/vmail/%d/%n/home mail_location = maildir:/home/vmail/%d/%n:LAYOUT=fs mail_plugins = acl mail_log notify quota trash virtual welcome zlib mail_server_admin = mailto:postmaster@example.com mail_uid = vmail mailbox_list_index = yes maildir_broken_filename_sizes = yes maildir_empty_new = yes maildir_very_dirty_syncs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext imapflags notify imapsieve vnd.dovecot.imapsieve namespace { hidden = no list = yes location = maildir:/home/vmail/public/:LAYOUT=fs:CONTROL=/home/vmail/public/:INDEX=/home/vmail/public/ prefix = public/ separator = / subscriptions = yes type = public } namespace inbox { hidden = no inbox = yes list = yes location = mailbox "Deleted Messages" { auto = no autoexpunge = 30 days special_use = \Trash } mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe autoexpunge = 30 days special_use = \Junk } mailbox "Junk E-mail" { auto = no autoexpunge = 30 days special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Items" { auto = no special_use = \Sent } mailbox "Sent Messages" { auto = no special_use = \Sent } mailbox Spam { auto = no autoexpunge = 30 days special_use = \Junk } mailbox Trash { auto = subscribe autoexpunge = 30 days special_use = \Trash } mailbox virtual/All { comment = All my messages special_use = \All } prefix = separator = / subscriptions = yes type = private } passdb { args = /usr/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { imapsieve_mailbox1_before = file:/usr/local/lib/dovecot/sieve/report-spam.sieve imapsieve_mailbox1_causes = COPY imapsieve_mailbox1_name = Spam imapsieve_mailbox2_before = file:/usr/local/lib/dovecot/sieve/report-ham.sieve imapsieve_mailbox2_causes = COPY imapsieve_mailbox2_from = Spam imapsieve_mailbox2_name = * last_login_dict = redis:host=127.0.0.1:port=6379 last_login_key = last-login/%u mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size quota = dict:User quota::proxy::sqlquota quota2 = maildir:Shared quota:ns=public/ quota_exceeded_message = Storage quota for this account has been exceeded, please try again later. quota_grace = 10%% quota_status_nouser = DUNNO quota_status_overquota = 552 5.2.2 Mailbox is full quota_status_success = DUNNO quota_warning = storage=100%% quota-warning 100 %u quota_warning2 = storage=95%% quota-warning 95 %u quota_warning3 = storage=90%% quota-warning 90 %u quota_warning4 = storage=85%% quota-warning 85 %u quota_warning5 = storage=75%% quota-warning 75 %u sieve = /home/vmail/%d/%n/sieve/scripts;active=/home/vmail/%d/%n/sieve/.dovecot.sieve sieve_before = /usr/local/etc/dovecot/sieve/dovecot.sieve sieve_default = /usr/local/etc/dovecot/sieve/dovecot.sieve sieve_dir = /usr/local/etc/dovecot/sieve sieve_extensions = +notify +imapflags sieve_global_dir = /usr/local/etc/dovecot/sieve/ sieve_global_extensions = +vnd.dovecot.pipe +vnd.dovecot.execute sieve_max_redirects = 30 sieve_max_script_size = 1M sieve_pipe_bin_dir = /usr/local/lib/dovecot/sieve sieve_plugins = sieve_imapsieve sieve_extprograms sieve_user_log = /home/vmail/%d/%n/sieve/sieve_error.log trash = /usr/local/etc/dovecot/dovecot-trash.conf.ext welcome_script = welcome %u welcome_wait = yes } postmaster_address = postmaster(a)example.com protocols = imap sieve sendmail_path = /usr/local/sbin/sendmail service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { group = vmail mode = 0660 user = vmail } } service dict { unix_listener dict { group = vmail mode = 0660 user = vmail } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } service_count = 1 } service imap { client_limit = 1 } service lmtp { unix_listener dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service managesieve-login { inet_listener sieve { address = 127.0.0.1 port = 4190 } process_min_avail = 0 service_count = 1 vsz_limit = 64 M } service quota-status { client_limit = 1 executable = quota-status -p postfix inet_listener { address = 127.0.0.1 port = 12345 } } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { group = vmail mode = 0666 user = vmail } user = vmail } service welcome { executable = script /usr/local/bin/welcome.sh unix_listener welcome { user = vmail } user = vmail } ssl_cert = </usr/local/etc/letsencrypt/live/mail.example.com/fullchain.pem ssl_cipher_list = EECDH+AESGCM:EDH+AESGCM:AES256+EECDH:AES256+EDH ssl_dh_parameters_length = 2048 ssl_key = # hidden, use -P to show it ssl_options = no_compression ssl_prefer_server_ciphers = yes ssl_protocols = !SSLv2 !SSLv3 userdb { driver = prefetch } userdb { args = /usr/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } userdb { args = uid=vmail gid=vmail home=/home/vmail/%d/%n driver = static } protocol lmtp { mail_plugins = acl mail_log notify quota trash virtual welcome zlib sieve } protocol lda { mail_fsync = optimized mail_plugins = acl mail_log notify quota trash virtual welcome zlib quota sieve } protocol imap { mail_max_userip_connections = 30 mail_plugins = acl mail_log notify quota trash virtual welcome zlib imap_acl imap_quota imap_sieve imap_zlib last_login } protocol sieve { managesieve_implementation_string = Dovecot Pigeonhole managesieve_max_compile_errors = 5 managesieve_max_line_length = 65536 } /usr/local/etc/dovecot/dovecot-dict-sql.conf.ext connect = host=/tmp/mysql.sock dbname=dbname user=user password=password # CREATE TABLE quota ( # username varchar(100) not null, # bytes bigint not null default 0, # messages integer not null default 0, # primary key (username) # ); map { pattern = priv/quota/storage table = quota username_field = username value_field = bytes } map { pattern = priv/quota/messages table = quota username_field = username value_field = messages } # CREATE TABLE expires ( # username varchar(100) not null, # mailbox varchar(255) not null, # expire_stamp integer not null, # primary key (username, mailbox) # ); #map { #pattern = shared/expire/$user/$mailbox #table = expires #value_field = expire_stamp #fields { #username = $user #mailbox = $mailbox #} #}

3 2

Accessing Shared Mailbox, FQDN not appended to user
by Ed Nitido 15 Apr '17

15 Apr '17

Hey all long time, I recently upgraded Dovecot from 2.1.15 to 2.2.29.1 on my Debian Wheezy box and thought I'd tackle shared mailboxes. I can grant fine, using SETACL in telnet . SETACL mine vsun(a)test.domain.com lr . OK Setacl complete (0.596 + 0.000 + 0.595 secs). . GETACL mine * ACL mine vsun(a)test.domain.com lr edward(a)test.domain.com lrwstipekxacd However, logging in as vsun(a)test.domain.com, the logs shows the MASTER IN user doesn't get FQDN. Instead of edward(a)test.domain.com it just shows edward@test How come it only show's a partial domain? Thanks! Here's my config: # 2.2.29.1 (e0b76e3): /usr/local/etc/dovecot/dovecot.conf # Pigeonhole version 0.4.18 (29cc74d) # OS: Linux 2.6.32-5-openvz-amd64 i686 Debian 7.11 auth_debug = yes auth_master_user_separator = * auth_mechanisms = plain login auth_socket_path = /usr/local/var/run/dovecot/auth-userdb debug_log_path = /var/log/dovecot-debug.log disable_plaintext_auth = no info_log_path = /var/log/dovecot-debug.log listen = * log_path = /var/log/dovecot-debug.log mail_debug = yes mail_gid = vmail mail_location = maildir:%h/Maildir mail_plugins = " quota" mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext namespace { list = children location = maildir:%%h/Maildir:INDEX=%h/Maildir/shared/%%u prefix = shared.%%u. separator = . subscriptions = no type = shared } namespace inbox { hidden = no inbox = yes list = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = . subscriptions = yes type = private } passdb { args = /usr/local/etc/dovecot/master-users driver = passwd-file master = yes pass = yes } passdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile acl_shared_dict = file:/home/%d/shared-mailboxes quota = maildir:User quota quota_rule = *:storage=1G quota_warning = storage=95%% quota-warning 95 %u %d quota_warning2 = storage=80%% quota-warning 80 %u %d sieve = file:~/sieve;active=~/.dovecot.sieve sieve_after = /usr/local/etc/dovecot/sieve.d/after/ sieve_max_actions = 32 sieve_max_redirects = 4 sieve_max_script_size = 1M sieve_quota_max_scripts = 0 sieve_quota_max_storage = 0 } postmaster_address = postmaster(a)test.domain.com protocols = imap pop3 lmtp sieve quota_full_tempfail = yes service auth { inet_listener { port = 12345 } unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } } service imap-login { inet_listener imap { port = 143 } } service imap-postlogin { executable = script-login /usr/local/bin/postlogin.sh } service imap { executable = imap imap-postlogin } service lmtp { inet_listener lmtp { port = 24 } unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } process_min_avail = 0 service_count = 1 vsz_limit = 64 M } service pop3-login { inet_listener pop3 { port = 110 } } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = vmail } user = dovecot } ssl = no userdb { args = /usr/local/etc/dovecot/dovecot-ldap.conf.ext driver = ldap } verbose_proctitle = yes protocol lmtp { mail_plugins = " quota quota sieve" } protocol lda { mail_plugins = " quota sieve" } protocol imap { mail_max_userip_connections = 20 mail_plugins = " quota imap_quota imap_acl acl" } protocol sieve { mail_debug = yes mail_max_userip_connections = 10 mail_plugins = managesieve_implementation_string = Dovecot Pigeonhole managesieve_logout_format = bytes=%i/%o managesieve_max_compile_errors = 5 managesieve_max_line_length = 65536 managesieve_notify_capability = managesieve_sieve_capability = } protocol pop3 { mail_max_userip_connections = 20 mail_plugins = " quota quota" } Here's my log: Apr 15 07:17:44 auth: Debug: client in: AUTH 1 PLAIN service=imap session=7Fq7Wi9N84DAqAzk lip=192.168.12.229 rip=192.168.12.228 lport=143 rport=33011 Apr 15 07:17:44 auth: Debug: client passdb out: CONT 1 Apr 15 07:17:44 auth: Debug: client in: CONT<hidden> Apr 15 07:17:44 auth: Debug: ldap(vsun(a)test.domain.com,192.168.12.228,<7Fq7Wi9N84DAqAzk>): pass search: base=dc=nitido,dc=com scope=subtree filter=(&(|(uid= vsun@test.domain.com)(mailAlternateAddress=vsun@test.domain.com))(nimPimUserStatus=active)) fields=uid,userPassword Apr 15 07:17:44 auth: Debug: ldap(vsun(a)test.domain.com,192.168.12.228,<7Fq7Wi9N84DAqAzk>): result: userPassword=<hidden> uid=vsun(a)test.domain.com; uid,userPassword unused Apr 15 07:17:44 auth: Debug: ldap(vsun(a)test.domain.com,192.168.12.228,<7Fq7Wi9N84DAqAzk>): result: userPassword=<hidden> uid=vsun(a)test.domain.com Apr 15 07:17:44 auth: Debug: client passdb out: OK 1 user= vsun(a)test.domain.com Apr 15 07:17:44 auth: Debug: master in: REQUEST 2978611201 18284 1 c7599d3e61eb73c5f88a0faa9c510d86 session_pid=18285 request_auth_token Apr 15 07:17:44 auth: Debug: ldap(vsun(a)test.domain.com,192.168.12.228,<7Fq7Wi9N84DAqAzk>): user search: base=dc=nitido,dc=com scope=subtree filter=(&(|(uid= vsun@test.domain.com)(mailAlternateAddress=vsun@test.domain.com))(nimPimUserStatus=active)) fields=homeDirectory,quotaMailSoft Apr 15 07:17:44 auth: Debug: ldap(vsun(a)test.domain.com,192.168.12.228,<7Fq7Wi9N84DAqAzk>): result: quotaMailSoft=2048 homeDirectory=/home/ test.domain.com/vsun@test.domain.com; homeDirectory,quotaMailSoft unused Apr 15 07:17:44 auth: Debug: ldap(vsun(a)test.domain.com,192.168.12.228,<7Fq7Wi9N84DAqAzk>): result: quotaMailSoft=2048 homeDirectory=/home/ test.domain.com/vsun@test.domain.com Apr 15 07:17:44 auth: Debug: master userdb out: USER 2978611201 vsun(a)test.domain.com home=/home/test.domain.com/vsun@test.domain.com quota_rule=*:storage=2048M auth_token=f594cf479e39a82a1175d26368186c2e8c938630 Apr 15 07:17:44 imap-login: Info: Login: user=<vsun(a)test.domain.com>, method=PLAIN, rip=192.168.12.228, lip=192.168.12.229, mpid=18285, session=<7Fq7Wi9N84DAqAzk> Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Loading modules from directory: /usr/local/lib/dovecot Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Module loaded: /usr/local/lib/dovecot/lib01_acl_plugin.so Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Module loaded: /usr/local/lib/dovecot/lib02_imap_acl_plugin.so Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Module loaded: /usr/local/lib/dovecot/lib10_quota_plugin.so Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Module loaded: /usr/local/lib/dovecot/lib11_imap_quota_plugin.so Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Added userdb setting: plugin/master_user=vsun(a)test.domain.com Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Added userdb setting: plugin/quota_rule=*:storage=2048M Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Effective uid=1021, gid=1021, home=/home/test.domain.com/vsun@test.domain.com Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Quota root: name=User quota backend=maildir args= Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Quota rule: root=User quota mailbox=* bytes=2147483648 messages=0 Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Quota warning: bytes=2040109465 (95%) messages=0 reverse=no command=quota-warning 95 vsun(a)test.domain.com test.domain.com Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Quota warning: bytes=1717986918 (80%) messages=0 reverse=no command=quota-warning 80 vsun(a)test.domain.com test.domain.com Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Quota grace: root=User quota bytes=214748364 (10%) Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Namespace inbox: type=private, prefix=, sep=., inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:/home/ test.domain.com/vsun@test.domain.com/Maildir Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: maildir++: root=/home/ test.domain.com/vsun@test.domain.com/Maildir, index=, indexpvt=, control=, inbox=/home/test.domain.com/vsun@test.domain.com/Maildir, alt= Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: acl: initializing backend with data: vfile Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: acl: acl username = vsun(a)test.domain.com Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: acl: owner = 1 Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: acl vfile: Global ACLs disabled Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Namespace : type=shared, prefix=shared.%u., sep=., inbox=no, hidden=no, list=children, subscriptions=no location=maildir:%h/Maildir:INDEX=/home/ test.domain.com/vsun@test.domain.com/Maildir/shared/%u Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: shared: root=/usr/local/var/run/dovecot, index=, indexpvt=, control=, inbox=, alt= Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: acl: initializing backend with data: vfile Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: acl: acl username = vsun(a)test.domain.com Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: acl: owner = 0 Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: acl vfile: Global ACLs disabled Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: quota: quota_over_flag check: quota_over_script unset - skipping Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: acl vfile: file /home/ test.domain.com/vsun@test.domain.com/Maildir/dovecot-acl not found Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: acl vfile: file /home/ test.domain.com/vsun@test.domain.com/Maildir/.Sent/dovecot-acl not found Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: acl vfile: file /home/ test.domain.com/vsun@test.domain.com/Maildir/.Sent Messages/dovecot-acl not found Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: acl vfile: file /home/ test.domain.com/vsun@test.domain.com/Maildir/.Trash/dovecot-acl not found Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: acl vfile: file /home/ test.domain.com/vsun@test.domain.com/Maildir/.Drafts/dovecot-acl not found Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: acl vfile: file /home/ test.domain.com/vsun@test.domain.com/Maildir/.Deleted Messages/dovecot-acl not found Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: acl vfile: file /home/ test.domain.com/vsun@test.domain.com/Maildir/.Spam/dovecot-acl not found Apr 15 07:17:44 auth: Debug: master in: USER 1 edward@test service=imap Apr 15 07:17:44 auth: Debug: ldap(edward@test): user search: base=dc=nitido,dc=com scope=subtree filter=(&(|(uid=edward@test )(mailAlternateAddress=edward@test))(nimPimUserStatus=active)) fields=homeDirectory,quotaMailSoft Apr 15 07:17:44 auth: Debug: ldap(edward@test): no fields returned by the server Apr 15 07:17:44 auth: Info: ldap(edward@test): unknown user Apr 15 07:17:44 auth: Debug: userdb out: NOTFOUND 1 Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: auth USER input: Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Quota root: name=User quota backend=maildir args= Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Quota rule: root=User quota mailbox=* bytes=2147483648 messages=0 Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Quota warning: bytes=2040109465 (95%) messages=0 reverse=no command=quota-warning 95 edward@test test Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Quota warning: bytes=1717986918 (80%) messages=0 reverse=no command=quota-warning 80 edward@test test Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Quota grace: root=User quota bytes=214748364 (10%) Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: shared: Tried to access mails of nonexistent user edward@test Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: maildir++: root=/usr/local/var/run/dovecot/user-not-found/edward@test, index=, indexpvt=, control=, inbox=/usr/local/var/run/dovecot/user-not-found/edward@test, alt= Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Namespace : /usr/local/var/run/dovecot/user-not-found/edward@test doesn't exist yet, using default permissions Apr 15 07:17:44 imap(vsun(a)test.domain.com): Debug: Namespace : Using permissions from /usr/local/var/run/dovecot/user-not-found/edward@test: mode=0700 gid=default

1 0

Test error: net_connect_ip(127.0.0.1:0) failed: Can't assign requested address
by Ruga 14 Apr '17

14 Apr '17

macOS 10.12.4 clang 4.0.0 (official, non apple version) libressl 2.5.3 ... 0 / 11 tests failed /Applications/Xcode.app/Contents/Developer/usr/bin/make check-am make[3]: Nothing to be done for `check-am'. Making check in lib-imap-client for bin in test-imapc-client; do \ if ! ./$bin; then exit 1; fi; \ done Error: net_connect_ip(127.0.0.1:0) failed: Can't assign requested address Warning: imapc(127.0.0.1:0): No more IP address(es) to try - reconnecting (delay 10 ms) Error: net_connect_ip(127.0.0.1:0) failed: Can't assign requested address Error: imapc(127.0.0.1:0): No more IP address(es) to try - disconnecting test: random seed #1 was 1492961683 imapc connect failed ................................................. : FAILED Warning: imapc(127.0.0.1:65275): connect(127.0.0.1, 65275) timed out after 0 seconds - reconnecting (delay 0 ms) Error: imapc(127.0.0.1:65275): connect(127.0.0.1, 65275) timed out after 0 seconds - disconnecting imapc banner hangs ................................................... : ok Warning: imapc(127.0.0.1:55425): Authentication timed out after 0 seconds - reconnecting (delay 0 ms) Error: imapc(127.0.0.1:55425): Authentication failed: Disconnected from server imapc login hangs .................................................... : ok imapc reconnect ...................................................... : ok imapc reconnect resend commands ...................................... : ok imapc reconnect resend commands failed ............................... : ok imapc reconnect mailbox .............................................. : ok 1 / 7 tests failed make[2]: *** [check-test] Error 1 make[1]: *** [check-recursive] Error 1 make: *** [check-recursive] Error 1 >cd /opt/src/dovecot-2.2.29.1/src/lib-imap-client >./test-imapc-client test: random seed #1 was 1492323309 Error: net_connect_ip(127.0.0.1:0) failed: Can't assign requested address Warning: imapc(127.0.0.1:0): No more IP address(es) to try - reconnecting (delay 10 ms) Error: net_connect_ip(127.0.0.1:0) failed: Can't assign requested address Error: imapc(127.0.0.1:0): No more IP address(es) to try - disconnecting imapc connect failed ................................................. : FAILED Warning: imapc(127.0.0.1:50987): connect(127.0.0.1, 50987) timed out after 0 seconds - reconnecting (delay 0 ms) Error: imapc(127.0.0.1:50987): connect(127.0.0.1, 50987) timed out after 0 seconds - disconnecting imapc banner hangs ................................................... : ok Warning: imapc(127.0.0.1:62023): Authentication timed out after 0 seconds - reconnecting (delay 0 ms) Error: imapc(127.0.0.1:62023): Authentication failed: Disconnected from server imapc login hangs .................................................... : ok imapc reconnect ...................................................... : ok imapc reconnect resend commands ...................................... : ok imapc reconnect resend commands failed ............................... : ok imapc reconnect mailbox .............................................. : ok 1 / 7 tests failed >search -cv net_connect . ./imapc-connection.c:1715: fd = net_connect_ip(ip, conn->client->set.port, NULL); ./imapc-connection.c:1722: i_error("net_connect_ip(%s:%u) failed: %m", >search -cv 127.0.0.1 . ./test-imapc-client.c:43: .host = "127.0.0.1", ... static struct imapc_client_settings test_imapc_default_settings = { .host = "127.0.0.1", .username = "testuser", .password = "testpass", .dns_client_socket_path = "", .temp_path_prefix = ".test-tmp/", .rawlog_dir = "", .connect_timeout_msecs = 500, .connect_retry_count = 3, .connect_retry_interval_msecs = 10, .max_idle_time = 10000, }; The client fails if the server is not listening... Is the test server listening? static int test_open_server_fd(in_port_t *bind_port) { int fd = net_listen(&bind_ip, bind_port, 128); if (debug) i_debug("server listening on %u", *bind_port); if (fd == -1) { i_fatal("listen(%s:%u) failed: %m", net_ip2addr(&bind_ip), *bind_port); } fd_set_nonblock(fd, FALSE); return fd; } Forcing debug... >grep 'static bool debug =' test-imapc-client.c static bool debug = TRUE; >make clean >make >./test-imapc-client test: random seed #1 was 1492955953 Error: net_connect_ip(127.0.0.1:0) failed: Can't assign requested address Warning: imapc(127.0.0.1:0): No more IP address(es) to try - reconnecting (delay 10 ms) Error: net_connect_ip(127.0.0.1:0) failed: Can't assign requested address Error: imapc(127.0.0.1:0): No more IP address(es) to try - disconnecting imapc connect failed ................................................. : FAILED Warning: imapc(127.0.0.1:57648): connect(127.0.0.1, 57648) timed out after 0 seconds - reconnecting (delay 0 ms) Error: imapc(127.0.0.1:57648): connect(127.0.0.1, 57648) timed out after 0 seconds - disconnecting imapc banner hangs ................................................... : ok Warning: imapc(127.0.0.1:61221): Authentication timed out after 0 seconds - reconnecting (delay 0 ms) Error: imapc(127.0.0.1:61221): Authentication failed: Disconnected from server imapc client disconnected unexpectedly: EOF imapc login hangs .................................................... : ok imapc reconnect ...................................................... : ok imapc reconnect resend commands ...................................... : ok imapc reconnect resend commands failed ............................... : ok imapc reconnect mailbox .............................................. : ok 1 / 7 tests failed Nope, test server is not running.

1 0

Cutting down on sql connections
by David Mehler 14 Apr '17

14 Apr '17

Hello, I'm running dovecot 2.29 on a freebsd 10.3 system. I'm trying to cut down queries to my database and tried to do a userdb static and prefetch. I modified the password query to pull in userdb_quota and got an error that that was not valid. Is this behavior normal? Apr 13 17:22:15 hostname dovecot: master: Dovecot v2.2.29 (13ebc01) starting up for imap, sieve Apr 13 17:22:24 hostname dovecot: imap-login: Login: user=<username(a)example.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=66452, secured, session=<TYjM6xJNnqp/AAAB> Apr 13 17:22:24 hostname dovecot: imap(username(a)example.com): Logged out in=102 out=3020 Apr 13 17:22:24 hostname dovecot: imap-login: Login: user=<username(a)example.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=68924, secured, session=<4xDQ6xJNht1/AAAB> Apr 13 17:22:24 hostname dovecot: imap(username Thanks. Dave.

2 1

Cutting down on sql connections
by David Mehler 14 Apr '17

14 Apr '17

Hello, I'm running dovecot 2.29 on a freebsd 10.3 system. I'm trying to cut down queries to my database and tried to do a userdb static and prefetch. I modified the password query to pull in userdb_quota and got an error that that was not valid. Is this behavior normal? Apr 13 17:22:15 hostname dovecot: master: Dovecot v2.2.29 (13ebc01) starting up for imap, sieve Apr 13 17:22:24 hostname dovecot: imap-login: Login: user=<username(a)example.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=66452, secured, session=<TYjM6xJNnqp/AAAB> Apr 13 17:22:24 hostname dovecot: imap(username(a)example.com): Logged out in=102 out=3020 Apr 13 17:22:24 hostname dovecot: imap-login: Login: user=<username(a)example.com>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=68924, secured, session=<4xDQ6xJNht1/AAAB> Apr 13 17:22:24 hostname dovecot: imap(username Thanks. Dave.

1 0

Trouble setting up dovecot/postfix/mysql with virtual mailboxes..
by Michael Segel 14 Apr '17

14 Apr '17

Hi, I’m building a new linux box to replace my current DNS/Mail server for my SOHO. I was going to set up postfix/dovecot/mysql so I can support virtual users. I also use Webmin to make admin easier. I ran in to a couple of snags. When I first got it set up, mail went to the virtmail user and I could use my Mac mail client to read the mail. Everything was working when testing it. I was working on my TLS certificates and I broke something. I don’t know what I did, but now it’s going to the local mailbox instead. (MailDir folder) Since most of my time is doing other things, I am hoping someone could point me in the right direction. Thx

2 3

Trouble compiling 2.2.29.1
by Marc Perkel 13 Apr '17

13 Apr '17

Not sure what I'm doing wrong but I run this: ./configure --prefix=/usr --sysconfdir=/etc --localstatedir=/var --enable-maintainer-mode --with-mysql and it forks thousands of copies of config.guess and will eventually lock up the computer. What am I doing wrong?

1 0

Can sieve feed mails to a pipe like procmail can?
by Peter Kielbasiewicz 13 Apr '17

13 Apr '17

Currently I use procmail to filter mails according to specific tokens and trigger certain actions. For that I feed mails which match certain criteria to a pipe which then post processes the mail right when it arrives. >From what I found I could use a workaround with sieve by storing mails somewhere and then work on those at certain intervals. But this is an awkward solution which causes delays and extra work for locking and post processing. I read that sieve be the more modern system but without the post-processing feature it is no replacement for procmail to me. Peter

2 1

dovecot & iOS
by Dirk Laurenz 12 Apr '17

12 Apr '17

Hello List, i have a working dovecot imap service running with multiple clients running fine, even iOS. What's anying is, that only on iOS ( ) i see a huge bunch of .CONTROL directories - marked grey. It seems to be a copy of the existing folder structure. I don't see this on thunderbird, outlook or even roundcube. Is there any chance to configure dovecot to hide those folders to iOS? Here's some extended Information.... Attached: Screenshot from iOS, where you can see, what i mean dovecot Version: 2.1.7 root@mail01:~# dovecot -n # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 4.9.14+ armv6l Debian 7.11 lda_mailbox_autocreate = yes listen = * mail_location = maildir:~/Maildir:INBOX=~/Maildir/Inbox:LAYOUT=fs:CONTROL=~/Maildir/.CONTROL:INDEX=~/Maildir/.INDEX namespace { inbox = yes location = mailbox { special_use = \Drafts name = Drafts } mailbox { special_use = \Junk name = Junk } mailbox { special_use = \Sent name = Sent } mailbox { special_use = \Sent name = Sent Messages } mailbox { special_use = \Trash name = Trash } prefix = name = inbox } passdb { driver = pam } plugin { antispam_debug_target = syslog antispam_signature = X-DSPAM-Signature antispam_spam = SPAM antispam_verbose_debug = 1 } postmaster_address = postmaster@domain protocols = " imap" service replication-notify-fifo { name = aggregator } service anvil-auth-penalty { name = anvil } service auth-worker { name = auth-worker } service auth-client { name = auth } service config { name = config } service dict { name = dict } service login/proxy-notify { name = director } service dns-client { name = dns_client } service doveadm-server { name = doveadm } service imap { name = imap-login } service login/imap { name = imap } service indexer-worker { name = indexer-worker } service indexer { name = indexer } service ipc { name = ipc } service lmtp { name = lmtp } service log-errors { name = log } service pop3 { name = pop3-login } service login/pop3 { name = pop3 } service replicator { name = replicator } service login/ssl-params { name = ssl-params } service stats-mail { name = stats } ssl_cert = </etc/dovecot/fullchain.pem ssl_key = </etc/dovecot/private/privkey.pem userdb { driver = passwd } protocol lmtp { service replication-notify-fifo { name = aggregator } service anvil-auth-penalty { name = anvil } service auth-worker { name = auth-worker } service auth-client { name = auth } service config { name = config } service dict { name = dict } service login/proxy-notify { name = director } service dns-client { name = dns_client } service doveadm-server { name = doveadm } service imap { name = imap-login } service login/imap { name = imap } service indexer-worker { name = indexer-worker } service indexer { name = indexer } service ipc { name = ipc } service lmtp { name = lmtp } service log-errors { name = log } service pop3 { name = pop3-login } service login/pop3 { name = pop3 } service replicator { name = replicator } service login/ssl-params { name = ssl-params } service stats-mail { name = stats } } protocol lda { info_log_path = /var/log/dovecot-lda.log log_path = /var/log/dovecot-lda.log service replication-notify-fifo { name = aggregator } service anvil-auth-penalty { name = anvil } service auth-worker { name = auth-worker } service auth-client { name = auth } service config { name = config } service dict { name = dict } service login/proxy-notify { name = director } service dns-client { name = dns_client } service doveadm-server { name = doveadm } service imap { name = imap-login } service login/imap { name = imap } service indexer-worker { name = indexer-worker } service indexer { name = indexer } service ipc { name = ipc } service lmtp { name = lmtp } service log-errors { name = log } service pop3 { name = pop3-login } service login/pop3 { name = pop3 } service replicator { name = replicator } service login/ssl-params { name = ssl-params } service stats-mail { name = stats } } protocol imap { mail_plugins = antispam service replication-notify-fifo { name = aggregator } service anvil-auth-penalty { name = anvil } service auth-worker { name = auth-worker } service auth-client { name = auth } service config { name = config } service dict { name = dict } service login/proxy-notify { name = director } service dns-client { name = dns_client } service doveadm-server { name = doveadm } service imap { name = imap-login } service login/imap { name = imap } service indexer-worker { name = indexer-worker } service indexer { name = indexer } service ipc { name = ipc } service lmtp { name = lmtp } service log-errors { name = log } service pop3 { name = pop3-login } service login/pop3 { name = pop3 } service replicator { name = replicator } service login/ssl-params { name = ssl-params } service stats-mail { name = stats } }

3 6

Released Pigeonhole v0.4.18 for Dovecot v2.2.29.
by Stephan Bosch 12 Apr '17

12 Apr '17

Hello Dovecot users, Here's the definitive 0.4.18 release. There were no changes since the release candidate. Changelog v0.4.18: + imapsieve plugin: Implemented the copy_source_after rule action. When this is enabled for a mailbox rule, the specified Sieve script is executed for the message in the source mailbox during a "COPY" event. This happens only after the Sieve script that is executed for the corresponding message in the destination mailbox finishes running successfully. + imapsieve plugin: Added non-standard Sieve environment items for the source and destination mailbox. - multiscript: The execution of the discard script had an implicit "keep", rather than an implicit "discard". The release is available as follows: https://pigeonhole.dovecot.org/releases/2.2/dovecot-2.2-pigeonhole-0.4.18.t… https://pigeonhole.dovecot.org/releases/2.2/dovecot-2.2-pigeonhole-0.4.18.t… Refer to http://pigeonhole.dovecot.org and the Dovecot v2.x wiki for more information. Have fun testing this release and don't hesitate to notify me when there are any problems. Regards, -- Stephan Bosch stephan(a)rename-it.nl

1 0

Vpopmail Error
by Bobber 12 Apr '17

12 Apr '17

I'm trying to compile the latest Dovecot (v2.2.29) and when I run make I get this error: > auth-userdb-vpopmail.o: In function `userdb_vpopmail_get_quota': > /usr/local/src/dovecot-2.2.29/src/auth/userdb-vpopmail.c:64: undefined > reference to `var_expand_table_build' > collect2: error: ld returned 1 exit status > Makefile:932: recipe for target 'auth' failed > make[3]: *** [auth] Error 1 > make[3]: Leaving directory '/usr/local/src/dovecot-2.2.29/src/auth' > Makefile:496: recipe for target 'all-recursive' failed > make[2]: *** [all-recursive] Error 1 > make[2]: Leaving directory '/usr/local/src/dovecot-2.2.29/src' > Makefile:619: recipe for target 'all-recursive' failed > make[1]: *** [all-recursive] Error 1 > make[1]: Leaving directory '/usr/local/src/dovecot-2.2.29' > Makefile:463: recipe for target 'all' failed > make: *** [all] Error 2 I'm using Debian Jessie and it's up to date. Just to make sure it wasn't something in Jessie I went back into v2.2.28 (which I've been using since it was released) and did a clean build successfully. I've never had any problems compiling dovecot up until now. Any ideas on how to fix this? -- *Bob Wooldridge* Blog: http://kc0dxf.net/blog/

4 8

v2.2.29.rc1 released
by Timo Sirainen 11 Apr '17

11 Apr '17

http://dovecot.org/releases/2.2/rc/dovecot-2.2.29.rc1.tar.gz http://dovecot.org/releases/2.2/rc/dovecot-2.2.29.rc1.tar.gz.sig Planning to release v2.2.29 on Monday. Please find and report any bugs before that. * When Dovecot encounters an internal error, it logs the real error and usually logs another line saying what function failed. Previously the second log line's error message was a rather uninformative "Internal error occurred. Refer to server log for more information." Now the real error message is duplicated in this second log line. * lmtp: If a delivery has multiple recipients, run autoexpunging only for the last recipient. This avoids a problem where a long autoexpunge run causes LMTP client to timeout between the DATA replies, resulting in duplicate mail deliveries. * config: Don't stop the process due to idling. Otherwise the configuration is reloaded when the process restarts. * mail_log plugin: Differentiate autoexpunges from regular expunges * imapc: Use LOGOUT to cleanly disconnect from server. * lib-http: Internal status codes (>9000) are no longer visible in logs * director: Log vhost count changes and HOST-UP/DOWN + quota: Add plugin { quota_max_mail_size } setting to limit the maximum individual mail size that can be saved. + imapc: Add imapc_features=delay-login. If set, connecting to the remote IMAP server isn't done until it's necessary. + imapc: Add imapc_connection_retry_count and imapc_connection_retry_interval settings. + imap, pop3, indexer-worker: Add (deinit) to process title before autoexpunging runs. + Added %{encrypt} and %{decrypt} variables + imap/pop3 proxy: Log proxy state in errors as human-readable string. + imap/pop3-login: All forward_* extra fields returned by passdb are sent to the next hop when proxying using ID/XCLIENT commands. On the receiving side these fields are imported and sent to auth process where they're accessible via %{passdb:forward_*}. This is done only if the sending IP address matches login_trusted_networks. + imap-login: If imap_id_retain=yes, send the IMAP ID string to auth process. %{client_id} expands to it in auth process. The ID string is also sent to the next hop when proxying. - fts-tika: Fixed crash when parsing attachment without Content-Disposition header. Broken by 2.2.28. - trash plugin was broken in 2.2.28 - auth: When passdb/userdb lookups were done via auth-workers, too much data was added to auth cache. This could have resulted in wrong replies when using multiple passdbs/userdbs. - auth: passdb { skip & mechanisms } were ignored for the first passdb - oauth2: Various fixes, including fixes to crashes - dsync: Large Sieve scripts (or other large metadata) weren't always synced. - Index rebuild (e.g. doveadm force-resync) set all mails as \Recent - imap-hibernate: %{userdb:*} wasn't expanded in mail_log_prefix - doveadm: Exit codes weren't preserved when proxying commands via doveadm-server. Almost all errors used exit code 75 (tempfail). - ACLs weren't applied to not-yet-existing autocreated mailboxes. - Fixed a potential crash when parsing a broken message header. - cassandra: Fallback consistency settings weren't working correctly. - doveadm director status <user>: "Initial config" was always empty - imapc: Various reconnection fixes.

3 10

How to use quota with dovecot
by Mik J 11 Apr '17

11 Apr '17

Hello, I would like to use quotas with dovecot and things are not clear to me. I read this page https://wiki2.dovecot.org/Quota 1) I did this # ls /usr/local/lib/dovecot/lib10_quota_plugin.so /usr/local/lib/dovecot/lib10_quota_plugin.so # grep mail_plugins /etc/dovecot/conf.d/10-mail.conf mail_plugins = notify replication quota Then the page tells about 20-imap.conf but an explanation is written # Space separated list of plugins to load (default is global mail_plugins). So what is that default global mail_plugins ? Is it the one coming from 10-mail.conf ? 2) I tried both use this mail_plugins = $mail_plugins quota in 20-imap.conf or comment it. And restarted dovecot each time Then commented out in 90-quota.conf quota_rule = *:storage=1G quota_rule2 = Trash:storage=+100M quota_grace = 10%% } But I have this message # doveadm quota recalc -u user(a)mydomain.org doveadm(user(a)mydomain.org): Error: Quota not enabled Does anyone knows why ?

4 5

v2.2.29 released
by Timo Sirainen 11 Apr '17

11 Apr '17

https://dovecot.org/releases/2.2/dovecot-2.2.29.tar.gz https://dovecot.org/releases/2.2/dovecot-2.2.29.tar.gz.sig * passdb/userdb dict: Don't double-expand %variables in keys. If dict was used as the authentication passdb, using specially crafted %variables in the username could be used to cause DoS (CVE-2017-2669) * When Dovecot encounters an internal error, it logs the real error and usually logs another line saying what function failed. Previously the second log line's error message was a rather uninformative "Internal error occurred. Refer to server log for more information." Now the real error message is duplicated in this second log line. * lmtp: If a delivery has multiple recipients, run autoexpunging only for the last recipient. This avoids a problem where a long autoexpunge run causes LMTP client to timeout between the DATA replies, resulting in duplicate mail deliveries. * config: Don't stop the process due to idling. Otherwise the configuration is reloaded when the process restarts. * mail_log plugin: Differentiate autoexpunges from regular expunges * imapc: Use LOGOUT to cleanly disconnect from server. * lib-http: Internal status codes (>9000) are no longer visible in logs * director: Log vhost count changes and HOST-UP/DOWN + quota: Add plugin { quota_max_mail_size } setting to limit the maximum individual mail size that can be saved. + imapc: Add imapc_features=delay-login. If set, connecting to the remote IMAP server isn't done until it's necessary. + imapc: Add imapc_connection_retry_count and imapc_connection_retry_interval settings. + imap, pop3, indexer-worker: Add (deinit) to process title before autoexpunging runs. + Added %{encrypt} and %{decrypt} variables + imap/pop3 proxy: Log proxy state in errors as human-readable string. + imap/pop3-login: All forward_* extra fields returned by passdb are sent to the next hop when proxying using ID/XCLIENT commands. On the receiving side these fields are imported and sent to auth process where they're accessible via %{passdb:forward_*}. This is done only if the sending IP address matches login_trusted_networks. + imap-login: If imap_id_retain=yes, send the IMAP ID string to auth process. %{client_id} expands to it in auth process. The ID string is also sent to the next hop when proxying. + passdb imap: Use ssl_client_ca_* settings for CA validation. - fts-tika: Fixed crash when parsing attachment without Content-Disposition header. Broken by 2.2.28. - trash plugin was broken in 2.2.28 - auth: When passdb/userdb lookups were done via auth-workers, too much data was added to auth cache. This could have resulted in wrong replies when using multiple passdbs/userdbs. - auth: passdb { skip & mechanisms } were ignored for the first passdb - oauth2: Various fixes, including fixes to crashes - dsync: Large Sieve scripts (or other large metadata) weren't always synced. - Index rebuild (e.g. doveadm force-resync) set all mails as \Recent - imap-hibernate: %{userdb:*} wasn't expanded in mail_log_prefix - doveadm: Exit codes weren't preserved when proxying commands via doveadm-server. Almost all errors used exit code 75 (tempfail). - ACLs weren't applied to not-yet-existing autocreated mailboxes. - Fixed a potential crash when parsing a broken message header. - cassandra: Fallback consistency settings weren't working correctly. - doveadm director status <user>: "Initial config" was always empty - imapc: Various reconnection fixes.

4 6

How to migration my mails from another server ?
by Mik J 10 Apr '17

10 Apr '17

Hello, I would like to host my mails and I would like to retrieve my existing mailbox content from my ISP My ISP ====== I don't have root access on the server The server seem to use Dovecot according to the banner. My machine ========== I have root access on the server I use Dovecot 2.2.21 I use Maildir I read this page multiple times but it's not clear to me https://wiki2.dovecot.org/Migration/Dsync "Set up configuration for the IMAP server you wish to migrate from" Is it my ISP's server or my server ? In which configuration file should I do this ? The same for this option dsync_features = empty-header-workaroundwhere is it supposed to be configured ? My most important case is quite "simple": the mailboxes (there are 2 or 3) I want to migrate don't exist on my machine, so there is no such problems as merge existing mails. Will this migration use imap and retrieve the content of the mails ? Will it use port 143 or 993 ? I'll use the backup option I have another case which there are mails on both servers. So I would like to keep existing mails on my machine. I'll use the sync -1 option ? Thank you

3 3

Re: abrt reported "imap killed by SIGBUS"
by Hongying Liu 10 Apr '17

10 Apr '17

Sorry for late response. This issue occurs ran randomly. So I don't know how to run valgrind command. 2017-04-10 17:14 GMT+08:00 Hongying Liu <hongyliu(a)redhat.com>: > Sorry for late response. > > This issue occurs ran randomly. So I don't know how to run valgrind > command. > > I upload the coredump. > > The version of dovecot is dovecot-2.2.10-7.el7.x86_64. > > 2017-04-07 14:07 GMT+08:00 Aki Tuomi <aki.tuomi(a)dovecot.fi>: > >> Please keep responses on list. >> >> Can you please run valgrind on this, as it appears to be some sort of >> memory corruption issue. >> >> Aki >> >> > On April 7, 2017 at 5:37 AM Hongying Liu <hongyliu(a)redhat.com> wrote: >> > >> > >> > Thanks for your response. >> > >> > (gdb) p cache >> > $1 = (struct mail_cache *) 0x7fc4a811a320 >> > (gdb) p cache->hdr >> > $2 = (const struct mail_cache_header *) 0x7fc4a6ddb000 >> > (gdb) p cache->hdr->file_seq >> > Cannot access memory at address 0x7fc4a6ddb008 <---- >> > (gdb) p reset_id >> > $3 = 1488892251 >> > >> > >> > 2017-04-06 19:34 GMT+08:00 Aki Tuomi <aki.tuomi(a)dovecot.fi>: >> > >> > > Hi! >> > > >> > > Responses in middle. >> > > >> > > Aki >> > > >> > > On 06.04.2017 06:05, Hongying Liu wrote: >> > > > Hi sbr-services, >> > > > >> > > > Could you give me some idea? >> > > > >> > > > ### abrt reported the error as below. >> > > > [root@cupop4 log]# abrt-cli list --since 1488267244 id >> > > > ad716dbfd3a68bbe0f055e32ebfe562f4f75df43 >> > > > reason: imap killed by SIGBUS >> > > > time: Sun Mar 19 2017 10:58:27 AM JST >> > > > cmdline: dovecot/imap >> > > > package: dovecot-2.2.10-7.el7 >> > > > uid: 80180 (acaa2325) >> > > > count: 2 >> > > > Directory: /var/spool/abrt/ccpp-2017-03-19-10:58:27-4904 >> > > > 'abrt-cli report を実行する/var/spool/abrt/ccpp-2017 >> -03-19-10:58:27-4904' >> > > > >> > > > >> > > > ### /var/log/messages >> > > > Mar 19 10:58:27 cupop4 abrt-hook-ccpp: Process 4904 (imap) of user >> 80180 >> > > > killed by SIGBUS - dumping core >> > > > >> > > > And, there are lots of ldap error in /var/log/messages. Dovecot >> uses the >> > > > ldap as userdb and passwddb. >> > > > Is the ldap error related to imap crash? >> > > > >> > > > Mar 19 10:58:21 cupop4 nslcd[1534]: [a378de] >> <group/member="postfix"> >> > > > ldap_result() failed: Invalid DN syntax: Invalid DN >> > > >> > > This looks like an invalid DN syntax. >> > > >> > > > >> > > > ### /var/log/dovecot >> > > > >> > > > Mar 19 10:58:27 cupop4 dovecot: imap(acaa2325): Fatal: master: >> > > > service(imap): child 4904 killed with signal 7 (core dumped) >> > > > >> > > Can you do p cache, p cache->hdr, p cache->hdr->file_seq and p >> reset_id >> > > >> > > > ### gdb >> > > > >> > > > Core was generated by `dovecot/imap'. >> > > > Program terminated with signal 7, Bus error. >> > > > #0 0x00007fc4a69f293e in mail_cache_lookup_offset >> (cache=0x7fc4a811a320, >> > > > view=<optimized out>, seq=<optimized out>, offset_r=offset_r@entry >> > > > =0x7ffe23a98900) >> > > > at mail-cache-lookup.c:95 >> > > > 95 while (cache->hdr->file_seq != reset_id) { >> > > > (gdb) bt >> > > > #0 0x00007fc4a69f293e in mail_cache_lookup_offset >> (cache=0x7fc4a811a320, >> > > > view=<optimized out>, seq=<optimized out>, offset_r=offset_r@entry >> > > > =0x7ffe23a98900) >> > > > at mail-cache-lookup.c:95 >> > > > #1 0x00007fc4a69f2afa in mail_cache_lookup_iter_init >> > > > (view=view@entry=0x7fc4a81332b0, >> > > > seq=<optimized out>, ctx_r=ctx_r@entry=0x7ffe23a988e0) >> > > > at mail-cache-lookup.c:154 >> > > > #2 0x00007fc4a69f2f8f in mail_cache_seq (seq=<optimized out>, >> > > > view=0x7fc4a81332b0) at mail-cache-lookup.c:322 >> > > > #3 mail_cache_field_exists (view=view@entry=0x7fc4a81332b0, >> > > seq=seq@entry=760, >> > > > field=field@entry=4) at mail-cache-lookup.c:352 >> > > > #4 0x00007fc4a69f3151 in mail_cache_lookup_field >> (view=0x7fc4a81332b0, >> > > > dest_buf=dest_buf@entry=0x7ffe23a98a00, seq=760, >> > > field_idx=field_idx@entry >> > > > =4) >> > > > at mail-cache-lookup.c:413 >> > > > #5 0x00007fc4a69d9439 in index_mail_cache_lookup_field >> > > > (mail=mail@entry=0x7fc4a8128cd0, >> > > > buf=buf@entry=0x7ffe23a98a00, field_idx=field_idx@entry=4) >> > > > at index-mail.c:68 >> > > > #6 0x00007fc4a69d94a7 in index_mail_get_fixed_field >> > > (mail=0x7fc4a8128cd0, >> > > > field=<optimized out>, data=<optimized out>, data_size=8) at >> > > > index-mail.c:130 >> > > > #7 0x00007fc4a69d9fed in index_mail_get_cached_virtual_size >> > > > (mail=mail@entry=0x7fc4a8128cd0, size_r=size_r@entry=0x7ffe23a98b20) >> at >> > > > index-mail.c:403 >> > > > #8 0x00007fc4a6987c1b in maildir_mail_get_virtual_size >> > > > (_mail=0x7fc4a8128cd0, size_r=0x7ffe23a98b20) at maildir-mail.c:388 >> > > > #9 0x00007fc4a69d9719 in index_mail_update_access_parts >> > > > (mail=mail@entry=0x7fc4a8128cd0) >> > > > at index-mail.c:1490 >> > > > #10 0x00007fc4a69dbb93 in index_mail_set_seq (_mail=0x7fc4a8128cd0, >> > > > seq=760, saving=<optimized out>) at index-mail.c:1521 >> > > > #11 0x00007fc4a69e28cb in search_more_with_mail >> (mail=0x7fc4a8128cd0, >> > > > ctx=0x7fc4a8132730) at index-search.c:1507 >> > > > #12 search_more_with_prefetching (mail_r=<optimized out>, >> ctx=<optimized >> > > > out>) at index-search.c:1579 >> > > > #13 search_more (ctx=ctx@entry=0x7fc4a8132730, >> > > > mail_r=mail_r@entry=0x7ffe23a98c20) >> > > > at index-search.c:1650 >> > > > #14 0x00007fc4a69e2ff4 in index_storage_search_next_nonblock >> > > > (_ctx=0x7fc4a8132730, mail_r=0x7fc4a81120d8, >> tryagain_r=0x7ffe23a98c87) >> > > at >> > > > index-search.c:1674 >> > > > #15 0x00007fc4a69bc4ef in mailbox_search_next_nonblock >> > > > (ctx=ctx@entry=0x7fc4a8132730, >> > > > mail_r=mail_r@entry=0x7fc4a81120d8, >> > > > tryagain_r=tryagain_r@entry=0x7ffe23a98c87) at >> mail-storage.c:1787 >> > > > #16 0x00007fc4a69bc55d in mailbox_search_next (ctx=0x7fc4a8132730, >> > > > mail_r=mail_r@entry=0x7fc4a81120d8) at mail-storage.c:1773 >> > > > #17 0x00007fc4a6e97874 in imap_fetch_more_int (ctx=ctx@entry >> > > =0x7fc4a8112078, >> > > > cancel=false) at imap-fetch.c:479 >> > > > #18 0x00007fc4a6e98852 in imap_fetch_more (ctx=0x7fc4a8112078, >> > > > cmd=cmd@entry=0x7fc4a8111ed0) >> > > > at imap-fetch.c:556 >> > > > #19 0x00007fc4a6e8c17d in cmd_fetch (cmd=0x7fc4a8111ed0) at >> > > cmd-fetch.c:284 >> > > > #20 0x00007fc4a6e9601c in command_exec (cmd=cmd@entry=0x7fc4a8111ed0) >> at >> > > > imap-commands.c:158 >> > > > #21 0x00007fc4a6e94f1f in client_command_input (cmd=cmd@entry >> > > =0x7fc4a8111ed0) >> > > > at imap-client.c:780 >> > > > #22 0x00007fc4a6e95005 in client_command_input (cmd=0x7fc4a8111ed0) >> at >> > > > imap-client.c:841 >> > > > #23 0x00007fc4a6e952fd in client_handle_next_command >> > > > (remove_io_r=<synthetic pointer>, client=0x7fc4a8111530) at >> > > > imap-client.c:879 >> > > > #24 client_handle_input (client=client@entry=0x7fc4a8111530) at >> > > > imap-client.c:891 >> > > > #25 0x00007fc4a6e956c5 in client_input (client=0x7fc4a8111530) at >> > > > imap-client.c:933 >> > > > #26 0x00007fc4a66e1a87 in io_loop_call_io (io=0x7fc4a811edd0) at >> > > > ioloop.c:388 >> > > > #27 0x00007fc4a66e290f in io_loop_handler_run >> > > > (ioloop=ioloop@entry=0x7fc4a80fc750) >> > > > at ioloop-epoll.c:220 >> > > > #28 0x00007fc4a66e15d8 in io_loop_run (ioloop=0x7fc4a80fc750) at >> > > > ioloop.c:412 >> > > > #29 0x00007fc4a668e9e3 in master_service_run >> (service=0x7fc4a80fc5e0, >> > > > callback=callback@entry=0x7fc4a6e9ed70 <client_connected>) at >> > > > master-service.c:571 >> > > > #30 0x00007fc4a6e89324 in main (argc=1, argv=0x7fc4a80fc390) at >> > > main.c:400 >> > > > >> > > > Thank you. >> > > > >> > > > Best regards, >> > > > Hongying Liu >> > > >> > > >> > >

1 0

[Bug] FTS invalid address parsing
by azurit＠pobox.sk 10 Apr '17

10 Apr '17

Hi, i found another bug in FTS while parsing quoted-printable/base64-encoded sender's name inside 'From' header (again, i was figuring out why some of messages cannot be searched). Header: From: =?UTF-8?Q?A=2CB?= <test(a)example.com> Data send to Solr by Dovecot: <field name="from">A@, B &lt;test(a)example.com&gt;</field> Header: From: =?UTF-8?Q?A_B=2CC?= <test(a)example.com> Data send to Solr by Dovecot: <field name="from">A@</field> Header: From: =?UTF-8?B?QSBCLEMK?= <test(a)example.com> Data send to Solr by Dovecot: <field name="from">A@</field> Dovecot 2.2.27. azur

2 2

[Bug] FTS double escaping
by azurit＠pobox.sk 09 Apr '17

09 Apr '17

Hi, i'm trying to resolve few problems with indexing 'From' headers using FTS/Solr. I was tcpdumping the communication between Dovecot and Jetty/Solr and noticed that 'From' headers, which includes also sender's name, are double escaped. This is what was Dovecot sending to Solr: </field><field name="from">Name Surname &lt;test(a)example.com&gt;</field></doc></add> As you can see, characters < and > were escaped to < and > which were, again, escaped to &lt; and &gt;. This is doing problems while trying to index whole e-mail address, as Solr sees it as '<test(a)example.com>'. I spend hours trying to figure out why i'm able to search in all parts of e-mail addresses but searching for full and exact e-mail address was successfull ONLY for messages which doesn't include sender's name in 'From' header. Finally, after i found this bug, this fixed all search problems: <filter class="solr.PatternReplaceFilterFactory" pattern="&lt;" replacement=""/> <filter class="solr.PatternReplaceFilterFactory" pattern="&gt;" replacement=""/> I hope that, at least, this bug, reported by me, will be fixed. Thank you. azur

3 5

sieve does not seem to be working
by Robert Moskowitz 09 Apr '17

09 Apr '17

my local.conf has: # 90-sieve.conf plugin { sieve_before = /home/sieve/globalfilter.sieve } and cat /home/sieve/globalfilter.sieve require ["fileinto","mailbox"]; if anyof ( header :contains "X-Spam-Flag" "YES", header :contains "subject" "***SPAM***" ) { fileinto :create "Spam"; } There IS a globalfilter.svbin when I tried: sendmail -i testit3(a)test.htt-consult.com < sample-spam-GTUBE-junk.txt amavis is flagging it as ***Spam*** but it stays in inbox. So I tried: sieve-test -e -l /home/vmail/test.htt-consult.com/testit3/ /home/sieve/globalfilter.sieve /home/vmail/test.htt-consult.com/testit3/cur/1491512409.M371278P6513.z9m9z.test.htt-consult.com\,S\=1823\,W\=1868\:2\, info: msgid=<GTUBE1.1010101(a)example.net>: stored mail into mailbox 'Spam'. sieve-test(root): Info: final result: success And it DID get copied to Spam, not moved. I am now seeing it in inbox and Spam. Of course ownership on the message in Spam were wrong (root:root instead of vmail:mail, but I fixed that). So two questions, probably linked: Why did sieve not work. Is the subject test case sensitive? If it is case sensitive, why did the sieve-test work? thanks

2 2