- dovecot - dovecot.org

subfolders in public mailboxes
by Burak Arslan 21 Jul '14

21 Jul '14

Hello, I added this to the configuration: namespace { type = public separator = . prefix = public. location = maildir:/var/mail/public subscriptions = no list = yes } and I can list maildirs inside these folders correctly. however, I can't see any subfolders. The issue seems to be that /var/mail/public dir itself is interpreted as a maildir directory. However, what I'd like to do is to have a bunch of directories inside /var/mail/public and treat them as separate maildirs. (I'd like to use this to make a few existing mailboxes public) is this possible? Best regards, Burak

2 1

Mailboxes not showing up in MS Outlook
by Jerry 21 Jul '14

21 Jul '14

Sat, 19 Jul 2014 15:03:03 -0400 I am not sure exactly where the problem is here. I am using a sieve script that sorts various incoming messages into their own mailbox. MS Outlook does not show those folders if they are not directly under INBOX. EXAMPLE: drwx------ 31 vmail vmail 1.0K 2014-07-19 14:46:55 EDT ./ drwx------ 3 vmail vmail 512B 2014-07-02 13:52:03 EDT ../ drwx------ 5 vmail vmail 512B 2014-07-10 08:33:03 EDT .Bass/ drwx------ 5 vmail vmail 512B 2014-07-16 07:33:18 EDT .Commissioners/ drwx------ 5 vmail vmail 512B 2014-07-08 13:41:19 EDT .Commissioners.Cordrey/ drwx------ 5 vmail vmail 512B 2014-07-03 17:01:31 EDT .Dover/ drwx------ 5 vmail vmail 512B 2014-07-19 08:32:05 EDT .Drafts/ drwx------ 5 vmail vmail 512B 2014-07-18 19:07:15 EDT .Fitts/ drwx------ 5 vmail vmail 512B 2014-07-08 13:41:19 EDT .Gering/ drwx------ 5 vmail vmail 512B 2014-07-19 08:32:05 EDT .Green/ drwx------ 5 vmail vmail 512B 2014-07-18 18:59:06 EDT .Haywood/ drwx------ 5 vmail vmail 512B 2014-07-03 17:01:31 EDT .Hornik/ drwx------ 5 vmail vmail 512B 2014-07-19 14:45:29 EDT .INBOX.Deleted Items/ drwx------ 5 vmail vmail 512B 2014-07-18 08:58:21 EDT .INBOX.Drafts/ drwx------ 5 vmail vmail 512B 2014-07-18 08:58:13 EDT .INBOX.Junk E-mail/ drwx------ 5 vmail vmail 512B 2014-07-19 14:46:56 EDT .INBOX.PSNC/ drwx------ 5 vmail vmail 512B 2014-07-19 14:46:57 EDT .INBOX.SGWASA/ drwx------ 5 vmail vmail 512B 2014-07-18 08:58:13 EDT .INBOX.Sent Items/ drwx------ 5 vmail vmail 512B 2014-07-19 14:46:58 EDT .INBOX.UNRBA/ drwx------ 5 vmail vmail 512B 2014-07-18 07:40:05 EDT .Locklear/ drwx------ 5 vmail vmail 512B 2014-07-08 13:39:58 EDT .PlanningBoard/ drwx------ 5 vmail vmail 512B 2014-07-19 08:32:05 EDT .Queue/ drwx------ 5 vmail vmail 512B 2014-07-03 17:01:31 EDT .SawyerHomes/ drwx------ 5 vmail vmail 512B 2014-07-19 08:32:05 EDT .Sent/ drwx------ 5 vmail vmail 512B 2014-07-19 06:54:07 EDT .Trash/ drwx------ 5 vmail vmail 512B 2014-07-10 19:19:51 EDT .Vicki/ drwx------ 5 vmail vmail 512B 2014-07-18 15:31:06 EDT .Westall/ drwx------ 2 vmail vmail 23K 2014-07-19 14:44:42 EDT cur/ -rw------- 1 vmail vmail 14B 2014-07-02 20:30:10 EDT dovecot-keywords -rw------- 1 vmail vmail 10K 2014-07-19 14:45:18 EDT dovecot-uidlist -rw------- 1 vmail vmail 8B 2014-07-18 08:58:13 EDT dovecot-uidvalidity -r--r--r-- 1 vmail vmail 0B 2014-07-02 13:52:04 EDT dovecot-uidvalidity.53b446e2 -rw------- 1 vmail vmail 2.6K 2014-07-08 14:26:45 EDT dovecot.index -rw------- 1 vmail vmail 78K 2014-07-19 14:44:42 EDT dovecot.index.cache -rw------- 1 vmail vmail 21K 2014-07-19 14:45:18 EDT dovecot.index.log -rw------- 1 vmail vmail 1.8K 2014-07-19 14:46:55 EDT dovecot.mailbox.log drwx------ 2 vmail vmail 512B 2014-07-02 14:15:43 EDT new/ In the above example, only the following are displayed: .INBOX.Deleted Items/ .INBOX.Drafts/ .INBOX.Junk E-mail/ .INBOX.PSNC/ .INBOX.SGWASA/ .INBOX.Sent Items/ .INBOX.UNRBA/ Do I have a configuration problem? dovecot -n # 2.2.13: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 10.0-RELEASE-p3 amd64 ufs auth_mechanisms = plain login cram-md5 digest-md5 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes log_path = /var/log/dovecot mail_location = maildir:/var/mail/vmail/%d/gerard managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave duplicate namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = username_format=%u /usr/local/etc/dovecot/user/passwd driver = passwd-file } passdb { args = scheme=CRYPT username_format=%u /usr/local/etc/dovecot/user/passwd driver = passwd-file } passdb { driver = pam } passdb { args = scheme=CRYPT username_format=%u /usr/local/etc/dovecot/user/passwd driver = passwd-file } plugin { sieve_global_dir = /usr/local/etc/dovecot/sieve/ sieve_global_path = /usr/local/etc/dovecot/sieve/default.sieve } postmaster_address = postmaster(a)seibercom.net service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { group = vmail mode = 0666 user = vmail } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = username_format=%u /usr/local/etc/dovecot/user/passwd default_fields = uid=vmail gid=vmail driver = passwd-file } userdb { driver = passwd } userdb { args = username_format=%u /usr/local/etc/dovecot/user/passwd driver = passwd-file } protocol lda { mail_plugins = sieve sieve } -- Jerry

3 2

Dovecot Replication: First Run
by Asai 19 Jul '14

19 Jul '14

Greetings, I'm working on building a redundant Dovecot server which will be replicated with my original. I would like to know if there's any potential problems I could run into in running this for the first time. For example, during an initial sync is it possible for the new server to sync improperly with the original and delete all of the emails on the original? Are there any gotchas that I should be aware of when doing a first run? -- --Asai

1 1

Difference btw. Dovecot Director and Dovecot Proxy
by Nathan Schultheiss 19 Jul '14

19 Jul '14

Hello, For a few days I try to understand what program (Dovecot Director or Dovecot Proxy) I should use for my email architecture. We are a hospital, and for security reasons, we must host ourselves our emails, and we must leave Google Apps... I wish to make a Dovecot backend for each department of the hospital. Each backend Dovecot has a local storage. Server 01: cardiology Server 02: emergency ... Server 05: administration Dovecot looks in the database which server to use to store email (lmtp) and transfer the mail for storage. I do not understand if I have to work with Dovecot Director or Proxy if I would that LMTP or IMAP request are forwarded to the right backend. Each have self storage and have not access to the other backend storage (no nfs, no network storage, ...). Users indicate imap.hospital.local, this point to Dovecot Director or Proxy and Dovecot check the login/password and forward the user to the right backend. In my database I put user@hospital = storage host 172.16.2.10 = folder /home/vmail/user/ (Maildir) I've read that the Director can refer the user to the same backend when there is a activ session (POP, IMAP, LMTP) But can we tell him to always refer the user to the same backend (IMAP and LMTP) ? I've found this picture schema who user have Dovecot Proxy => Dovecot Director => Dovecot Backend And I'm confused why they have proxy + director ?!? Can anyone tell me if I need to focus on Dovecot Director or Dovecot Proxy to create the architecture of this hospital ? My question is probably stupid for Dovecot sysadmin, but I'm lost in the WIKI :) Thanks in advance, Nathan

2 2

Postfix user@domain splitting
by Ricardo Branco 18 Jul '14

18 Jul '14

I have been trying looking though all the wiki documents to setup LMTP. It now seems to all be connected except that it keeps saying that the user is not recognised when postfix sends to LMTP, it sends the full recipent email address but seems that on the dovecot side it is unable to work with this. I have checked the userdb and made sure its using %n but alas it still does not work. Currently ive had to revert to using LDA as it works fine with that but i still dont know how as the postfix config variable $RECIPIENT is the full email address and does not seem to matter to LDA.

4 11

ulimit warning when restarting
by Will Yardley 18 Jul '14

18 Jul '14

When restarting Dovecot 2.2.10 (via atrpms) on RHEL 6, I get the error: Warning: fd limit (ulimit -n) is lower than required under max. load (1024 < 4096), because of default_client_limit # doveconf default_internal_user default_internal_user = dovecot Should dovecot print this warning based on $default_internal_user, or based on root? As root: # ulimit -n 1024 As user dovecot: $ ulimit -n 49152 $ whoami dovecot # grep dovecot /etc/security/limits.conf dovecot hard locks 49152 dovecot hard nofile 49152 dovecot hard maxlogins 8192 dovecot soft locks 49152 dovecot soft nofile 49152 dovecot soft maxlogins 8192

3 2

Panic: file mail-storage.c
by giovanni＠neweden.uk.to 18 Jul '14

18 Jul '14

Greetings, In my installation I have debian 7.6 dovecot 2.2.13 dovecot-antispamplugin VERSION=2.0 for this enviroment some users cannot get imap connections. Here below an excerpt the log file. Jul 09 23:54:07 imap(xx(a)xxx.co.uk): Panic: file mail-storage.c: line 2158(mailbox_copy): assertion failed: (!ctx->unfinished) ul 09 23:54:07 imap(xx(a)xxx.co.uk): Error: Raw backtrace: /usr/local/lib/dovecot/libdovecot.so.0(+0x6bb4f) [0x7fd796ccdb4f] -> /usr/local/lib/dovecot/libdovecot.so.0(+0x6bbae) [0x7fd796ccdbae] -> /usr/local/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7fd796c871ee] -> /usr/local/lib/dovecot/libdovecot-storage.so.0(+0x82519) [0x7fd796fb9519] -> dovecot/imap() [0x40dba4] -> dovecot/imap(command_exec+0x3c) [0x41822c] -> dovecot/imap() [0x417290] -> dovecot/imap() [0x41734a] -> dovecot/imap(client_handle_input+0x115) [0x417605] -> dovecot/imap(client_input+0x72) [0x4179b2] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x4e) [0x7fd796cde81e] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0xd7) [0x7fd796cdf7f7] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x9) [0x7fd796cde8a9] -> /usr/local/lib/dovecot/libdovecot.so.0(io_loop_run+0x38) [0x7fd796cde928] -> /usr/local/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7fd796c8c4d3] -> dovecot/imap(main+0x277) [0x40c067] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7fd7968f5ead] -> dovecot/imap() [0x40c1c5] for others users imap connection is ok with antispam plugin working fine (antispam_backend = spool2dir) To enable the imap connections for the unlucky users (with the previous error) I had to remove the anti spam plugin. Does anybody is experiencing the same errors? cheers Giovanni

1 0

Dovecot/K9/Thunderbird IMAP interaction issues: replicated messages, constant reloading (TB) & missing new messages (K-9)
by David Gessel 18 Jul '14

18 Jul '14

Version Info: FreeBSD 9.2-RELEASE #0 r266046 AMD64, Dovecot 2.2.13, dovecot-pigeonhole-0.4.3, amavisd-new-2.8.0_2,1, clamav-0.98.4, postfix29-2.9.9_1,1, postfixadmin-2.3.6, spamassassin-3.4.0_12 (zpool data and output of dovecot -n at bottom of post) I suspect these are related problems and further that they are related to some trivial newb error I've made in my configuration, but searching descriptions of the symptoms has not yet guided me to a solution. I recently migrated from Courier to Dovecot on new hardware and imap synced a 16GB mailstore (du -hs) divided up into annual directories with about 15,000 messages each. I mention the size because it seems an errant Remove Duplicate Messages (Alternate) 0.3.9 acting on what seem to be false duplicates in Thunderbird reduced the inbox size from 7500-ish messages to 1300 (DOH!) and may have solved my K-9 problem described below. My old Courier server still has the vast majority of these messages and I will resync someday and then try to file them away more expediently than my previously somewhat lazy management style to keep the inbox small. * In thunderbird, I get constant downloading of messages. Every time I switch to the inbox from another folder, the messages start redownloading. This sometimes, but not always, seems to create duplicate messages, but I'm now fairly sure they are only created in the client and not on the server. Searching through various forums, it appears this has been a problem for Thunderbird for some time, but it wasn't for me on Courier. As posts about similar errors seem to have petered out over the last year without any clear guidance on how to fix it that I could find, I expect there's a simple fix I just haven't found yet, either in TB configuration or in Dovecot. Any hints? I tried Thunderfix to remove the .msf files and will be redownloading my mail over the thin pipe out to Iraq for the next 6 months (DOH!). One artifact is that when I restart thunderbird, my inbox is reported as having about 130 messages in it, then thunderbird starts redownloading headers and eventually gets back up to the 1297 currently listed both in the TB pane and by ls | wc -l in /cur. Is it possible there is a time out that needs to be extended? In TB, I've set (among other less apparently relevant options) mailnews.tcptimeout;1000 mail.db.idle_limit;30000000 * Also, with Thunderbird, I get duplication of messages in the client. I suspect this is related to the previous redownload error, but there is some indication in some posts that it is potentially related to a dirty flag. I've had this problem before with Thunderbird and Courier, but it went away after a TB update. It seems to have reappeared with Dovecot. The TB client hasn't been updated during the transition, so some interaction issue seems more likely than a pure TB bug. Likely TB's fault as this is a well known, but poorly diagnosed TB issue (deleting duplicates regularly seems to be the solution, but my inbox would double in size every few hours on the LAN. Now that I'm remote over a 2mbps link, it has slowed way down: bonus!). * "Expunged message reappeared, giving a new UID" errors appear a lot. This might well be related to the last error. This seems to happen with TB client connections, but I'm not sure what action triggers it. I am not replicating. I tried renaming 10-director.conf to 10-director.conf.disabled and got no complaints from Dovecot (as I'm not using replication, it shouldn't) but that indicates that this Expunged message reappeared error is probably of a different source than, for example, Simon Fraser's debug effort. * K9 was only showing a subset of my messages and generally not the new ones. They'd appear in the alert properly, but weren't visible in the client and sometimes they'd be visible and then disappear later. I imagined there could a correlation between TB checking mail and perhaps moving messages from /new to /cur and K9 losing track, but the potentially tragic "duplicate" removal may have reduced my inbox to a size that k9 can handle as K9 inbox display seems normal now as far as I can tell. When I resync (assuming I can), I sort of dread this problem reappearing. K9 worked as expected against Courier with the same inbox. These apparently difficult to diagnose problems are occasionally suggested as related to namespace configuration issues and thunderbird is reported to have issues with some separator options. I vaguely suspect this, but I'm pretty sure my namespace config is default and should be well tested. I haven't, for example, explicitly stated the default "/" but left it commented out. I increased the connection limit count per user*IP to 20 as TB seems to be parallel downloading a lot of folders. This has neither improved nor degraded performance in any way I can see and is probably irrelevant. Any hints greatly appreciated. Filesystem/Zpool data: NAME PROPERTY VALUE SOURCE zroot size 400G - zroot capacity 28% - zroot altroot - default zroot health ONLINE - zroot guid 1061309925223582150 default zroot version - default zroot bootfs zroot local zroot delegation on default zroot autoreplace off default zroot cachefile - default zroot failmode wait default zroot listsnapshots off default zroot autoexpand off default zroot dedupditto 0 default zroot dedupratio 1.10x - zroot free 286G - zroot allocated 114G - zroot readonly off - zroot comment - default zroot expandsize 0 - zroot freeing 0 default zroot feature@async_destroy enabled local zroot feature@empty_bpobj active local zroot feature@lz4_compress active local server # dovecot -n # 2.2.13: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 9.2-RELEASE amd64 auth_default_realm = mydomain.com auth_mechanisms = plain login auth_realms = mydomain.com mydomain2.org disable_plaintext_auth = no first_valid_gid = 5000 first_valid_uid = 5000 hostname = mydomain.com imap_client_workarounds = tb-extra-mailbox-sep tb-lsub-flags imap_idle_notify_interval = 29 mins last_valid_gid = 5000 last_valid_uid = 5000 lda_mailbox_autocreate = yes listen = * mail_gid = 5000 mail_location = maildir:~/:CONTROL=/var/no-quota/%u mail_plugins = quota mail_log notify mail_temp_dir = /var/tmp mail_uid = 5000 maildir_broken_filename_sizes = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave duplicate spamtest spamtestplus editheader mbox_lazy_writes = no namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = /usr/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { expire = Trash mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size quota = maildir:User quota quota_exceeded_message = Storage quota for this account has been exceeded, please try again later. quota_rule = *:storage=50G quota_rule2 = Trash:storage=+30%% quota_rule3 = Sent:storage=+30%% quota_warning = storage=90%% quota-warning 90 %u quota_warning2 = storage=75%% quota-warning 75 %u sieve = ~/.dovecot.sieve sieve_before = /usr/local/etc/dovecot/sieve/ sieve_dir = ~/sieve sieve_extensions = +spamtest +spamtestplus +relational +comparator-i;ascii-numeric +editheader } postmaster_address = gessel(a)mydomain.com protocols = imap lmtp sieve sieve sendmail_path = /usr/local/sbin/sendmail service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0666 user = postfix } unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 1 vsz_limit = 128 M } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { user = vmail } user = vmail } ssl = required ssl_cert = </usr/local/etc/ca/server-cert.pem ssl_cipher_list = ECDHE-RSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-SHA384:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-SHA256:ECDHE-RSA-RC4-SHA:ECDHE-RSA-AES256-SHA:!SSLv2 ssl_key = </usr/local/etc/ca/server-unencrypted-key.pem ssl_prefer_server_ciphers = yes userdb { driver = prefetch } userdb { args = /usr/local/etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lda { mail_plugins = quota mail_log notify sieve } protocol imap { mail_max_userip_connections = 20 mail_plugins = quota mail_log notify imap_quota imap_zlib } protocol lmtp { mail_plugins = quota mail_log notify sieve }

3 5

Sieve: adding Date: header when missing
by Daniele Nicolodi 17 Jul '14

17 Jul '14

Hello, there is a way with a sieve rule to add a Date: header when it is missing? Adding one with the time of reception of the message or using the date from the the first Received: header would be good options. Unfortunately I'm receiving some useful automated messages that lack a Date header and this screws up the sorting in my imap clients. I have a script to fix those acting on the Maildir storage, but I would prefer to have the thing solved more radically. Thanks. Cheers, Daniele

6 12

dspam dovecot-lda
by Eric Broch 17 Jul '14

17 Jul '14

Hello list, Is there a way to call a spam filter in dovecot-lda like maildrop uses the xfilter command within the .mailfilter file to do the same? Eric

2 1

possible bug around ACL
by Maciej 'Agaran' Pijanka 17 Jul '14

17 Jul '14

Hello I want to set readonly over IMAP for users mailboxes at Archive namespace, (and have single user who can move mails there on automated way) This don't work but found that if I add file to /srv/mail.archives/<user>/dovecot-acl containing only owner lr then login to imap (with telnet) and do 1 GETACL Archive I get following result from gdb attached to worker process serving particular connection. Program received signal SIGSEGV, Segmentation fault. acl_mailbox_right_lookup (box=0x7fd75e4e1dc0, right_idx=right_idx@entry=10) at acl-mailbox.c:40 40 if (abox->skip_acl_checks) (gdb) p abox $1 = (struct acl_mailbox *) 0x0 (gdb) # uname -a Linux omelette 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3 x86_64 GNU/Linux ii dovecot-core 1:2.2.13-2 amd64 local build from sources in testing just disabled lucene ps. I am idling on #dovecot too, if any info is needed with faster round trip time than emails. best regards -- agaran at pld dash linux dot org I do not fear computers. I fear the lack of them. [Isaac Asimov]

1 0

If local Dovecot stops working, check lo
by Steve Litt 17 Jul '14

17 Jul '14

Hi all, You probably know this already, but just in case... Let's say you have your email client getting mail from a Dovecot server on the same computer (which is a really good way of doing things, by the way). Then one day your email client starts saying "connection refused" after a suitably long timeout. So then, to find out where things are getting stuck, you do the following command: openssl s_client -connect 127.0.0.1:993 -quiet And you don't even get an OK back. This means it's not your username or password, because you never even got that far. Before spending a lot of time doing diagnostic tests and narrowing it to the root cause, try this as root: ifdown lo ifup lo A malfunctioning lo will cause Dovecot not to connect to clients. My experience with Debian Wheezy is that lo "goes down" a lot, so this is one of the first things I do when odd stuff happens. HTH, SteveT Steve Litt * http://www.troubleshooters.com/ Troubleshooting Training * Human Performance

6 8

Resource Temporarily Unavailable on replicator-doveadm
by Cassidy Larson 16 Jul '14

16 Jul '14

We're running 2.2.13 on two servers with replication. Still trying to get my replication tweaked correctly and I’m noticing a bunch of these errors for the same users over and over again: dsync-server(user(a)host.com): Error: write(/var/run/dovecot/replicator-doveadm) failed: Resource temporarily unavailable The 5-7 that I see all have quite a number of individual mailboxes (20+), I’m wondering if that has something to do with it? Also, my replicator status for full resync requests has been hovering around 2300-2400 the last few days: # doveadm replicator status Queued 'sync' requests 0 Queued 'high' requests 0 Queued 'low' requests 0 Queued 'failed' requests 0 Queued 'full resync' requests 2410 Waiting 'failed' requests 1 Total number of known users 9836 In checking the replication status for some of the “Resource temporarily unavailable” list from above, if I run it multiple times it outputs different results for the fast and full sync time: # doveadm replicator status user(a)host.com username priority fast sync full sync failed user(a)host.com none 00:20:21 49:43:34 - # doveadm replicator status user(a)host.com username priority fast sync full sync failed user(a)host.com none 00:10:55 00:10:55 - # doveadm replicator status user(a)host.com username priority fast sync full sync failed user(a)host.com none 00:10:56 00:10:56 - # doveadm replicator status user(a)host.com username priority fast sync full sync failed user(a)host.com none 00:10:57 00:10:57 - # doveadm replicator status user(a)host.com username priority fast sync full sync failed user(a)host.com none 00:20:24 49:43:37 - doveconf output for the replicator service is: service replicator { process_limit = 10 process_min_avail = 2 unix_listener replicator-doveadm { group = mailsys mode = 0666 user = mailsys } unix_listener replicator { group = mailsys mode = 0666 user = mailsys } } Anybody have any clues or suggestions? I’d be much appreciative. Thanks, Cassidy

1 0

BUG: dovecot -n writes no usable configuration file
by Hardy Flor 16 Jul '14

16 Jul '14

Hello, For testing, I wanted to make create a small configuration file of dovecot. This created file but did not work imap-postLogin. It missing the lines: unix_listener imap-postlogin { } in the section "service imap-postLogin". Hardy

1 0

Dovecot 2.2.13+ Assertion failed in sync_expunge_range
by Potapov Sergey 16 Jul '14

16 Jul '14

Hi! I got this error when build dovecot from source (rev 17627), configure it as imapc proxy (http://wiki2.dovecot.org/HowTo/ImapcProxy) and run imaptest with clients=2 or more, on latest stable version (2.2.13) and with clients=1 this error does not occurred. Jul 16 17:22:26 imap(user771): Panic: file mail-index-sync-update.c: line 250 (sync_expunge_range): assertion failed: (count > 0) Jul 16 17:22:26 imap(user771): Error: Raw backtrace: /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(+0x872a6) [0x7f8a956682a6] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(+0x88683) [0x7f8a95669683] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f8a956685f9] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(+0x106f13) [0x7f8a959f5f13] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(+0x107e5a) [0x7f8a959f6e5a] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(mail_index_sync_record+0x33) [0x7f8a959f76a3] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(mail_index_sync_map+0x4e8) [0x7f8a959f7d97] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(mail_index_map+0x126) [0x7f8a959e1817] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(+0xeb410) [0x7f8a959da410] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(+0xeb707) [0x7f8a959da707] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage. so.0(mail_index_open+0x17e) [0x7f8a959daa33] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(index_storage_mailbox_open+0xe7) [0x7f8a959c6742] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(+0x81fd4) [0x7f8a95970fd4] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(+0x9a5d4) [0x7f8a959895d4] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(mailbox_open+0x1d) [0x7f8a9598975d] -> dovecot/imap() [0x414a3f] -> dovecot/imap(cmd_select_full+0x204) [0x414fac] -> dovecot/imap(cmd_select+0x1d) [0x414ff1] -> dovecot/imap(command_exec+0x5f) [0x41bdf4] -> dovecot/imap() [0x41ad47] -> dovecot/imap() [0x41b049] -> dovecot/imap() [0x41b169] -> dovecot/imap(client_handle_input+0x7e) [0x41b1e9] -> dovecot/imap(client_input+0xe6) [0x41b37c] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(io_loop_call_io+0xb6) [0x7f8a95681c32] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0x1e5) [0x7f8a95683ce4] -> /home/lion/dovecot-2.2/lib/ dovecot/libdovecot.so.0(io_loop_handler_run+0x18) [0x7f8a95681dcd] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(io_loop_run+0xaf) [0x7f8a95681d26] Jul 16 17:22:26 imap(user771): Panic: file mail-index-sync-update.c: line 250 (sync_expunge_range): assertion failed: (count > 0) Jul 16 17:22:26 imap(user771): Error: Raw backtrace: /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(+0x872a6) [0x7fc4005942a6] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(+0x88683) [0x7fc400595683] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7fc4005945f9] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(+0x106f13) [0x7fc400921f13] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(+0x107e5a) [0x7fc400922e5a] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(mail_index_sync_record+0x33) [0x7fc4009236a3] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(mail_index_sync_map+0x4e8) [0x7fc400923d97] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(mail_index_map+0x126) [0x7fc40090d817] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(+0xeb410) [0x7fc400906410] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(+0xeb707) [0x7fc400906707] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage. so.0(mail_index_open+0x17e) [0x7fc400906a33] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(index_storage_mailbox_open+0xe7) [0x7fc4008f2742] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(+0x81fd4) [0x7fc40089cfd4] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(+0x9a5d4) [0x7fc4008b55d4] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(mailbox_open+0x1d) [0x7fc4008b575d] -> dovecot/imap() [0x414a3f] -> dovecot/imap(cmd_select_full+0x204) [0x414fac] -> dovecot/imap(cmd_select+0x1d) [0x414ff1] -> dovecot/imap(command_exec+0x5f) [0x41bdf4] -> dovecot/imap() [0x41ad47] -> dovecot/imap() [0x41b049] -> dovecot/imap() [0x41b169] -> dovecot/imap(client_handle_input+0x7e) [0x41b1e9] -> dovecot/imap(client_input+0xe6) [0x41b37c] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(io_loop_call_io+0xb6) [0x7fc4005adc32] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0x1e5) [0x7fc4005afce4] -> /home/lion/dovecot-2.2/lib/ dovecot/libdovecot.so.0(io_loop_handler_run+0x18) [0x7fc4005addcd] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(io_loop_run+0xaf) [0x7fc4005add26] # 2.2.13 (fd0616d553b0): /home/lion/dovecot-2.2/etc/dovecot/dovecot.conf # OS: Linux 3.11.0-24-generic x86_64 Ubuntu 12.04.4 LTS auth_mechanisms = plain login default_internal_user = lion default_login_user = lion disable_plaintext_auth = no imapc_host = localhost log_path = /home/lion/dovecot-2.2/var/log/dovecot.log mail_home = /home/lion/dovecot-2.2/home/vmail/%u mail_location = imapc:~/imapc namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = host=localhost port=143 default_fields = userdb_imapc_user=%u userdb_imapc_password=%w driver = imap } plugin { fts = solr fts_solr = url=http://localhost:8080/solr/ break-imap-search mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size } service anvil { chroot = } service auth-worker { user = $default_internal_user } service imap-login { chroot = inet_listener imap { port = 10143 } inet_listener imaps { port = 10993 } } service lmtp { chroot = } service pop3-login { chroot = inet_listener pop3 { port = 10110 } inet_listener pop3s { port = 10995 } } ssl = no userdb { driver = prefetch }

1 0

Dovecot 2.2.13 Assertion failed in mailbox_list_create
by Potapov Sergey 16 Jul '14

16 Jul '14

Hi I got this error when configured imapc proxy (http://wiki2.dovecot.org/HowTo/ImapcProxy) and moved indexes to memory (mail_location = imapc:~/imapc:INDEX=MEMORY), with indexes on disk this error does not occurred. Jul 16 17:06:31 imap-login: Info: Login: user=<user87>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, mpid=21703, secured, session=<iwFgMU/+lwB/AAAB> Jul 16 17:06:31 imap(user87): Panic: file mailbox-list.c: line 136 (mailbox_list_create): assertion failed: (set->root_dir == NULL || *set->root_dir != '\0' || ((*class_p)->props & MAILBOX_LIST_PROP_NO_ROOT) != 0) Jul 16 17:06:31 imap(user87): Error: Raw backtrace: /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(+0x872a6) [0x7f39be4d52a6] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(+0x88683) [0x7f39be4d6683] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(i_fatal+0) [0x7f39be4d55f9] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(mailbox_list_create+0x204) [0x7f39be7ff031] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(+0x78934) [0x7f39be7d4934] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(+0x78bbb) [0x7f39be7d4bbb] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(mailbox_list_get_path+0x34) [0x7f39be80230a] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(mailbox_get_path_to+0x8a) [0x7f39be7f9455] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(+0x9a0ee) [0x7f39be7f60ee] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot-storage.so.0(mailbox_get_status+0x32) [0x7f39be7f793c] -> dovecot/imap(imap_status_get+0xf0) [ 0x4252ac] -> dovecot/imap(cmd_status+0x1b7) [0x416177] -> dovecot/imap(command_exec+0x5f) [0x41bdf4] -> dovecot/imap() [0x41ad47] -> dovecot/imap() [0x41b049] -> dovecot/imap() [0x41b169] -> dovecot/imap(client_handle_input+0x7e) [0x41b1e9] -> dovecot/imap(client_input+0xe6) [0x41b37c] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(io_loop_call_io+0xb6) [0x7f39be4eec32] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0x1e5) [0x7f39be4f0ce4] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x18) [0x7f39be4eedcd] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(io_loop_run+0xaf) [0x7f39be4eed26] -> /home/lion/dovecot-2.2/lib/dovecot/libdovecot.so.0(master_service_run+0x2e) [0x7f39be477d6d] -> dovecot/imap(main+0x2b3) [0x428a6d] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xed) [0x7f39be0af76d] -> dovecot/imap() [0x40ad59] # 2.2.13 (fd0616d553b0+): /home/lion/dovecot-2.2/etc/dovecot/dovecot.conf # OS: Linux 3.11.0-24-generic x86_64 Ubuntu 12.04.4 LTS auth_mechanisms = plain login default_internal_user = lion default_login_user = lion disable_plaintext_auth = no imapc_host = localhost log_path = /home/lion/dovecot-2.2/var/log/dovecot.log mail_home = /home/lion/dovecot-2.2/home/vmail/%u mail_location = imapc:~/imapc:INDEX=MEMORY namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = host=localhost port=143 default_fields = userdb_imapc_user=%u userdb_imapc_password=%w driver = imap } plugin { fts = solr fts_solr = url=http://localhost:8080/solr/ break-imap-search mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename mail_log_fields = uid box msgid size } service anvil { chroot = } service auth-worker { user = $default_internal_user } service imap-login { chroot = inet_listener imap { port = 10143 } inet_listener imaps { port = 10993 } } service lmtp { chroot = } service pop3-login { chroot = inet_listener pop3 { port = 10110 } inet_listener pop3s { port = 10995 } } ssl = no userdb { driver = prefetch }

1 0

Sending emails using dovecot auth
by Murray Trainer 16 Jul '14

16 Jul '14

Hi All, I have noticed that dovecot / exim on Cpanels appear to support sending emails via exim after authenticating to Dovecot - see message below 550-Please turn on SMTP Authentication in your mail client, or login to the 550-IMAP/POP3 server before sending your message We are migrating users mail off cpanels into split mta and dovecot servers and are having problems with some users being abble to send emails afterwards. Does anyone understand how the CPanel config works? Thanks Murray

2 1

trying to build pigeonhole v0.4.3 sources on CentOs 6.5 - error while executing 'make'
by Wim Paulussen 16 Jul '14

16 Jul '14

Hello all, I am trying to build pigeonhole from source but get the following (only error output) : ../../src/lib-sieve/.libs/libdovecot-sieve.so: undefined reference to `mail_get_backend_mail' collect2: ld returned 1 exit status make[3]: *** [sievec] Error 1 make[2]: *** [all-recursive] Error 1 make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 Output further shows following warning : ieve-actions.c:515 implicit declaration of function 'mail_get_backend_mail' dovecot -n : # 2.2.12: /usr/local/etc/dovecot/dovecot.conf # OS: Linux 2.6.32-431.11.2.el6.x86_64 x86_64 CentOS release 6.5 (Final) auth_debug = yes auth_mechanisms = plain login auth_verbose = yes base_dir = /var/run/dovecot/ listen = * log_path = /var/log/dovecot.log mail_gid = 504 mail_home = /var/mail/vhost/%d/%n mail_location = maildir:~/ mail_uid = 503 passdb { args = /usr/local/etc/dovecot/dovecot-users driver = passwd-file } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } ssl = required ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem protocol lda { auth_socket_path = /var/run/dovecot/auth-master postmaster_address = postmaster(a)asgc-admin.be }

1 0

TRANSLATION extension to the NAMESPACE response supported?
by A. Schulze 16 Jul '14

16 Jul '14

Hello, I would like to ask if the TRANSLATION extension to the NAMESPACE response is supported by dovecot. context: http://lists.horde.org/archives/horde/Week-of-Mon-20140714/052136.html Thanks, Andreas

3 4

ATrpms repo
by Will Yardley 16 Jul '14

16 Jul '14

Tried mailing the maintainer, but didn't get a response -- anyone know what's happened to the ATrpms repo? Not only is http://atrpms.net/name/dovecot/ empty, but: http://packages.atrpms.net/dist/el6/ seems to return a 404. Some of the mirrors still have the packages, but does anyone know if they're going to continue to build 2.2.x packages? w

3 4

fts solr database size
by Lazy 16 Jul '14

16 Jul '14

Hi, Could anyone share any numbers about real life solr database size/cpu/memory usage for certain amounts of messages ? We have now over 5TB of maildirs (about 5 000-6 000 concurrent imap clients) and I'm trying to guess how much hardware might be needed. -- Michal

2 2

Dovecot2 Antispam MAILTRAIN backend with SpamAssassin
by Mohammad S. Babaei 15 Jul '14

15 Jul '14

Hi there, I've already asked this question on FreeBSD forums without getting any response. So, I thought it's a good idea to ask it again here. I've setup Dovecote2 (2.2.13) + Postfix + SpamAssassin on my FreeBSD 10 VPS and it works flawlessly. Though, I couldn't setup the Dovecot Antispam plugin to train SpamAssassin when I move mails to the Junk folder. I installed the plugin from FreeBSD ports and followed the official documentation [1] and the man page [2] without any success. This is my configuration: ######## # 2.2.13: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 10.0-RELEASE-p6 i386 ufs auth_mechanisms = plain login digest-md5 disable_plaintext_auth = no first_valid_gid = 6 first_valid_uid = 26 last_valid_gid = 6 last_valid_uid = 26 lmtp_save_to_detail_mailbox = yes mail_gid = mail mail_location = mdbox:/mail/%d/%u mail_privileged_group = mail mail_uid = mailnull managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Archive { auto = no special_use = Archive } mailbox Drafts { auto = subscribe special_use = Drafts } mailbox Flagged { auto = no special_use = Flagged } mailbox Junk { auto = subscribe special_use = Junk } mailbox Sent { auto = subscribe special_use = Sent } mailbox Trash { auto = subscribe special_use = Trash } mailbox virtual/All { auto = no special_use = All } prefix = separator = / } passdb { args = /mail/%d/dovecot_passwd driver = passwd-file } plugin { antispam_backend = MAILTRAIN antispam_mail_notspam = --ham antispam_mail_sendmail = /mail/sa-learn-pipe.sh antispam_mail_spam = --spam antispam_spam = Junk antispam_trash = Trash quota_rule = *:storage=8GB sieve = /mail/%d/%u/dovecot.sieve sieve_dir = /mail/%d/%u sieve_global_dir = /mail/sieve sieve_global_path = /mail/sieve/globalfilter.sieve } protocols = imap pop3 lmtp sieve service auth { unix_listener auth-client { group = mail mode = 0660 user = postfix } unix_listener auth-master { group = mail mode = 0600 user = mailnull } user = root } service imap-login { inet_listener imap { address = * port = 143 } inet_listener imaps { address = * port = 993 } process_limit = 32 process_min_avail = 1 } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } process_min_avail = 0 service_count = 1 vsz_limit = 64 M } service managesieve { process_limit = 1024 } service pop3-login { inet_listener pop3 { address = * port = 110 } inet_listener pop3s { address = * port = 995 } process_limit = 32 process_min_avail = 1 } ssl_cert = </etc/ssl/dovecot/cert.pem ssl_key = </etc/ssl/dovecot/key.pem userdb { args = /mail/%d/dovecot_passwd driver = passwd-file } verbose_proctitle = yes protocol lmtp { mail_plugins = " sieve" postmaster_address = postmaster(a)SomeDomain.com quota_full_tempfail = yes } protocol sieve { mail_max_userip_connections = 10 managesieve_implementation_string = Dovecot Pigeonhole managesieve_logout_format = bytes=%i/%o managesieve_max_line_length = 65536 } protocol imap { imap_client_workarounds = delay-newmail tb-extra-mailbox-sep mail_plugins = " quota imap_quota antispam" } protocol pop3 { mail_plugins = " quota" pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol lda { mail_plugins = " quota sieve" postmaster_address = postmaster(a)SomeDomain.com sendmail_path = /usr/local/sbin/sendmail } ######## And, this is the script /mail/sa-learn-pipe.sh: ######## echo /usr/local/bin/sa-learn $* /tmp/sendmail-msg-$$.txt echo "$$-start ($*)" >> /tmp/sa-learn-pipe.log #echo $* > /tmp/sendmail-parms.txt cat<&0 >> /tmp/sendmail-msg-$$.txt /usr/local/bin/sa-learn $* /tmp/sendmail-msg-$$.txt rm -f /tmp/sendmail-msg-$$.txt echo "$$-end" >> /tmp/sa-learn-pipe.log exit 0 ######## I made it excecutable by all users using chmod a+x /mail/sa-learn-pipe.sh The problem is, there is no log in /var/log/maillog regarding the Antispam plugin, and the script won't get called when I move any message in/out to/from Junk folder. I'll appreciate any help. -- "When I give, I give myself." - Walt Whitman Links: ------ [1] http://wiki2.dovecot.org/Plugins/Antispam [2] http://hg.dovecot.org/dovecot-antispam-plugin/raw-file/tip/doc/dovecot-anti…

2 2

Permissions with mailman
by Niklas Lemcke - 林樂寬 15 Jul '14

15 Jul '14

Hi, I'm running a Mailserver, and recently also a Mailinglist. I'm sporting # dovecot --version 2.1.7 on a debian stable machine with postfix & mailman. Everything works fine, except that no archive is being created (here an excerpt from my log): Jul 2 15:29:39 blade01 postfix/qmgr[5217]: B30BCE1F52: from=<list(a)mail.myserver.com>, size=802, nrcpt=1 (queue active) Jul 2 15:29:39 blade01 dovecot: lda(list): Error: user list: Initialization failed: Initializing mail storage from mail_location setting failed: mkdir(/var/mail/vmail//list/mail) failed: Permission denied (euid=38(list) egid=38(list) missing +w perm: /var/mail/vmail/, we're not in group 5000(vmail), dir owned by 5000:5000 mode=0775) Jul 2 15:29:39 blade01 dovecot: lda(list): Fatal: Invalid user settings. Refer to server log for more information. Jul 2 15:29:39 blade01 postfix/local[2778]: B30BCE1F52: to=<list(a)mail.myserver.com>, orig_to=<list>, relay=local, delay=12578, delays=12578/0.16/0/0.17, dsn=4.3.0, status=deferred (temporary failure) Now since dovecot is running as user vmail (the other mail folders are all well managed and accessed by it, and all owned by vmail:vmail) I thought it might be saying that the user list is not in group vmail. Now: $ groups list list : list vmail and the permissions are 775, but it's still complaining about "missing +w perm". What is it referring to with "we're not in group 5000"? Thanks for any help! -- Niklas - 林樂寬

3 4

Fatal: master: service(imap): child 20258 killed with signal 6 (core not dumped - set service imap { drop_priv_before_exec=yes })
by CJ Keist 15 Jul '14

15 Jul '14

All, Just move our mail servers over to a new mail server running postfix 2.11.1 and dovecot 2.2.13 and getting the subject line errors in my /var/adm/files. People are complaining of loosing their connections to the mail server. I've been able to google this error but haven't found fix for this yet. NOt sure where to put the drop-priv option in the config files either. Any suggestions? Var adm message: Jul 10 08:54:29 mail2 dovecot: [ID 583609 mail.crit] imap(chen): Fatal: master: service(imap): child 20258 killed with signal 6 (core not dumped - set service imap { drop_priv_before_exec=yes }) Here is config output: root@mail2:/userM/mail-services/dovecot/sbin# ./dovecot -n # 2.2.13: /userM/mail-services/dovecot/etc/dovecot/dovecot.conf # OS: SunOS 5.11 i86pc auth_failure_delay = 5 secs auth_mechanisms = plain login cram-md5 auth_worker_max_count = 300 base_dir = /userM/mail-services/dovecot/var/run/dovecot/ disable_plaintext_auth = no hostname = mail2.engr.colostate.edu managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave duplicate namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } passdb { driver = passwd } postmaster_address = cjay(a)engr.colostate.edu service auth { unix_listener /var/lib/postfix/private/auth { mode = 0666 } unix_listener auth-userdb { group = postfix mode = 0666 user = postfix } user = root } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } ssl_cert = </userM/mail-services/dovecot/etc/ssl/dovecot.pem ssl_key = </userM/mail-services/dovecot/etc/ssl/privkey.pem userdb { args = blocking=yes driver = passwd } protocol imap { mail_max_userip_connections = 50 } protocol lda { mail_plugins = sieve } -- C. J. Keist Email: cj.keist(a)colostate.edu Systems Group Manager Solaris 10 OS (SAI) Engineering Network Services Phone: 970-491-0630 College of Engineering, CSU Fax: 970-491-5569 Ft. Collins, CO 80523-1301 All I want is a chance to prove 'Money can't buy happiness'

7 19

Changed IMAP MOVE behavior in Dovecot 2.2.x
by Iavor Stoev 15 Jul '14

15 Jul '14

Hello, After the migration to Dovecot 2.2.13 from Dovecot 2.1.17, I noticed a changed behavior when I move a message from one folder to another. I use Thunderbird with: Account Settings -> Server Settings -> When I delete a message: Just mark it as deleted. I use Thunderbird 24.6.0 with IMAP. With Dovecot 2.1.x when I move a message, the message appears in the new folder and is marked for deletion in the original folder (which gives me an easy option to undo the action if I made a mistake until I choose to Compact/Purge the folder). With Dovecot 2.2.x when I move the a message it is marked for deletion and is AUTO Compacted/Purged immediately. Is there a way to achieve the 2.1.x behavior with Dovecot 2.2.x? Thank you Iavor

3 3