- dovecot - dovecot.org

[Dovecot] Sieve is not getting the propper RCPT from the LMTP daemon
by klondike 14 Feb '14

14 Feb '14

Hi! Since the setup I use is a bit strange let's go for it first: * The system uses postfix as MTA and dovecot as LDA after alias translation by local via LMTP * The dovecot version is 2.2.5 and the pigeonhole version is 0.4.1 * The SMTP server at gentoo.org is configured to send me a backup of my emails to klondike+gentoo (at) xiscosoft.es using sendmail * The email is received by the server and then (hopefully filtered). * The email comes with two Delivered-To: headers, the first one has the correct address, the second one has the gentoo address. The interesting part of the filter is this: if envelope :detail "to" "gentoo" { addflag "\\Seen"; fileinto "gentoo"; stop; } But this doesn't seem to work, I enable debugging with the following lines: require "vnd.dovecot.debug"; require "envelope"; require "variables"; if envelope :matches "to" "*" { debug_log "envelope to `${1}'"; } if envelope :matches "from" "*" { debug_log "envelope from `${1}'"; } The relevant lines for the test e-mail I sent are these: sieve: info: started log at Dec 24 13:37:23. main script: line 9: info: DEBUG: envelope to `klondike (at) gentoo.org'. main script: line 10: info: DEBUG: envelope from `klondike (at) gentoo.org'. info: msgid=<52B97FF7.6050109(a)gentoo.org>: stored mail into mailbox 'INBOX'. The thing is that the to envelope should be instead klondike+gentoo (at) xiscosoft.es as show by the lmtp logs: Dec 24 13:37:23 localhost dovecot: lmtp(26249): Connect from local Dec 24 13:37:23 localhost dovecot: lmtp(26249, klondike): Cd6YHwOAuVKJZgAA0J78UA: sieve: msgid=<52B97FF7.6050109(a)gentoo.org>: stored mail into mailbox 'INBOX' Dec 24 13:37:23 localhost dovecot: lmtp(26249): Disconnect from local: Successful quit Dec 24 13:37:23 localhost postfix/lmtp[26248]: 657D9101E5E: to=<klondike+gentoo (at) xiscosoft.es>, relay=xiscosoft.net[private/dovecot-lmtp], delay=0.29, delays=0.05/0.03/0.03/0.18, dsn=2.0.0, status=sent (250 2.0.0 <klondike+gentoo (at) xiscosoft.es> Cd6YHwOAuVKJZgAA0J78UA Saved) I really have no idea of why sieve is behaving like this as the evelope address is sent properly by postfix's lmtp according to the logs. Any ideas? klondike PS: please do CC me when answering this e-mail as I'm not subscribed to the list yet

4 4

[Dovecot] master user and ACL's
by Peter Mogensen 14 Feb '14

14 Feb '14

Hi, Quick question...I read in the docs that: "Master user is still subject to ACLs just like any other user, which means that by default the master user has no access to any mailboxes of the user." ... and that the standard workaround is to return master_user=%u from the userdb. But why is the master_user authn-id used in the ACLs and not the authz-id (requested-login-user) ? Isn't the whole point of SASL authz-id semantics to have authorization resolved based on the authz-id? /Peter

2 4

[Dovecot] Public folder doesn't work
by vupibi 14 Feb '14

14 Feb '14

Hey, I have some issues with dovecot, because the public folder won't show up in Mail accounts. Dovecot is installed via zentyal 3.3. I tried several settings, but I dont get it running. What I tried is adding this to my dovecot.conf file # User's private mail location mail_location = maildir:~/Maildir # When creating any namespaces, you must also have a private namespace: namespace { type = private separator = / prefix = #location defaults to mail_location. inbox = yes } namespace { type = public separator = / prefix = Public/ location = maildir:/var/vmail/public subscriptions = no } But nothing happened. I tried it with # Umask for shared folders umask = 0007 with subscriptions = yes tried creating the folder first like this touch /var/vmail/public/dovecot-shared chown -R ebox /var/vmail/public find /var/vmail/public -type d -print0 | xargs -0 chmod 2770 find /var/vmail/public -type f -print0 | xargs -0 chmod 660 But i had no success. Any Ideas how to get it running? Here is my dovecot -n output # 2.0.19: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-58-generic x86_64 Ubuntu 12.04.4 LTS ext4 auth_gssapi_hostname = mailand.sxps.int auth_krb5_keytab = /etc/dovecot/dovecot.keytab auth_mechanisms = gssapi plain first_valid_gid = 116 first_valid_uid = 108 log_timestamp = "%Y-%m-%d %H:%M:%S " mail_gid = 116 mail_home = /var/vmail/sieve/%d/%u mail_location = maildir:/var/vmail/%$ mail_uid = 108 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave passdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } plugin { autocreate = Trash autocreate2 = Spam autocreate3 = Sent autocreate4 = Drafts autosubscribe = Trash autosubscribe2 = Spam autosubscribe3 = Sent autosubscribe4 = Drafts quota = maildir:User quota quota_rule = *:storage=0 sieve = /var/vmail/sieve/%d/%u/sieve-script sieve_dir = /var/vmail/sieve/%d/%u sieve_global_path = /var/vmail/sieve/default.sieve sieve_storage = /var/vmail/sieve/%d/%u } protocols = imap sieve service auth { executable = /usr/lib/dovecot/auth unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-master { group = ebox mode = 0600 user = ebox } user = dovecot } service imap-login { inet_listener imap { address = * port = 143 } inet_listener imaps { address = * port = 993 } } service managesieve-login { inet_listener sieve { port = 4190 } } ssl_cert = </etc/dovecot/ssl/dovecot.pem ssl_key = </etc/dovecot/ssl/dovecot.pem userdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } protocol imap { mail_plugins = quota imap_quota autocreate } protocol lda { auth_socket_path = /var/run/dovecot/auth-master mail_plugins = sieve quota postmaster_address = admin(a)XX.eu } Modify message -- View this message in context: http://dovecot.2317879.n4.nabble.com/Public-folder-doesn-t-work-tp46671.html Sent from the Dovecot mailing list archive at Nabble.com.

2 1

[Dovecot] Some LDA questions!
by Фадеев Виталий Львович 14 Feb '14

14 Feb '14

Hi there! I have been setuped exim and dovecot. Exim uses dovecot-lda to deliver mails to mailbox. Some configurations of exim: dovecot_virtual_delivery: driver = pipe command = /usr/libexec/dovecot/dovecot-lda -d $local_part@$domain -f $sender_address message_prefix = message_suffix = delivery_date_add envelope_to_add return_path_add log_output user = vmail group = vmail #mode = 0660 temp_errors = 64 : 69 : 70: 71 : 72 : 73 : 74 : 75 : 78 dovecot does mysql lookups of users, passwords. All works, but in headers of example message: Return-path: <"vitalyf(a)bbb.com"@host.aaa.com> Envelope-to: vitalyf(a)bbb.com Delivery-date: Tue, 11 Feb 2014 03:59:17 -0600 Received: from xxx.net ([11.22.33.44] helo=[192.168.1.77]) by host.aaa.com with esmtpsa (TLS1.0:ECDHE_RSA_AES_128_CBC_SHA1:128) (Exim 4.82) (envelope-from <"vitalyf(a)bbb.com"@host.aaa.com>) id 1WDA7Y-0007GS-VR for vitalyf(a)bbb.com; Tue, 11 Feb 2014 03:59:17 -0600 Message-ID: <52F9F468.9030001(a)bbb.com> Date: Tue, 11 Feb 2014 16:59:04 +0700 From: =?UTF-8?B?0KTQsNC00LXQtdCyINCS0LjRgtCw0LvQuNC5INCb0YzQstC+0LLQuNGH?= <vitalyf(a)bbb.com> User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:24.0) Gecko/20100101 Thunderbird/24.3.0 MIME-Version: 1.0 To: vitalyf(a)bbb.com Subject: adfasdf Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 7bit Sender: "vitalyf(a)bbb.com"@host.aaa.com Test headers host.aaa.com is a hostname that run dovecot and exim. bbb.com is a virtual domain located in mysql db. I do not want to show host.aaa.com in headers. How can i disable this so headers looks like this: Return-path: <vitalyf(a)bbb.com> Which configuration i need to show you?

2 1

[Dovecot] Cached message size larger than expected
by Steven Haigh 14 Feb '14

14 Feb '14

Hi guys, I recently turned on IMAP zlib compression for Maildir and noticed that I've started getting these errors in the maillog. Error: Cached message size larger than expected (1627 > 1548) Error: Maildir filename has wrong S value, renamed the file from /home/crc.id.au/netwiz/.System Generated.Cron Jobs/cur/1392224150.M52270P1073.mail.crc.id.au,S=1627:2,S,Z to /home/crc. id.au/netwiz/.System Generated.Cron Jobs/cur/1392224150.M52270P1073.mail.crc.id.au,S=1627:2,S,Z Error: Corrupted index cache file /home/crc.id.au/netwiz/.System Generated.Cron Jobs/dovecot.index.cache: Broken physical size for mail UID 10916 Error: read(zlib(/home/crc.id.au/netwiz/.System Generated.Cron Jobs/cur/1392224150.M52270P1073.mail.crc.id.au,S=1627:2,S,Z)) failed: Invalid argument Disconnected: Internal error occurred. Refer to server log for more information. [2014-02-14 15:08:20] For these emails, I can no longer retrieve the contents of those messages in my mail client. I noticed a thread similar to this for Dovecot 2.1.3 (or so) - however I'm getting the same on 2.2.12. Has there been any solutions for this? -- Steven Haigh Email: netwiz(a)crc.id.au Web: https://www.crc.id.au Phone: (03) 9001 6090 - 0412 935 897 Fax: (03) 8338 0299

2 4

[Dovecot] Exclude Users from replication/sync
by Daniel Stoye 14 Feb '14

14 Feb '14

Hi All, i'm searching for a way to exclude certain users from dovecots replication mechanism. I can't use the first_valid_uid setting, because the uid of my pam (ldap) users und my system users are mixed up. So, is there a way to limit my users i currently have in my userdb or somehow exclude specific uids from replication? Thanks, Daniel

2 3

[Dovecot] v2.2.12 released
by Timo Sirainen 14 Feb '14

14 Feb '14

http://dovecot.org/releases/2.2/dovecot-2.2.12.tar.gz http://dovecot.org/releases/2.2/dovecot-2.2.12.tar.gz.sig POP3 server code changes rarely, so I haven't spent time adding automated testing for it. So of course now that it changed in v2.1.11 there was a bug that caused it to crash most of the time (except for the test case I was using while developing it). This release fixes it, no other changes.

2 2

[Dovecot] Dovecot 2.2.10 crash / infinite loop bug
by Jani Hast 14 Feb '14

14 Feb '14

Hello, I though this bug should be reported, although there is workaround already made and in use. Dovecot 2.2.10 crashes into out of memory error when there is defined system users (userdb+passdb) and own virtual users (userdb+passdb). Removing either one solves the issue and Dovecot is working as it should. When memory leak (I replaced pw_init and gr_init with the version that is found from 2.1.17) is fixed from lib/ipwd.c source, the auth worker gets to infinite loop and authentication timeouts(timeout was increased, but worker does not end what ever it's doing). This far I got chance to debug this before other passdb was removed due lack of time. Here's logs, configs and backtrace: Feb 1 07:39:19 openbsd dovecot: auth-worker(30906): Fatal: pool_system_realloc(268435456): Out of memory Feb 1 07:39:19 openbsd dovecot: auth: Error: auth worker: Aborted request: Worker process died unexpectedly Feb 1 07:39:19 openbsd dovecot: auth-worker(30906): Fatal: master: service(auth-worker): child 30906 returned error 83 (Out of memory (service auth-worker { vsz_limit=256 MB }, you may need to increase it) - set CORE_OUTOFMEM=1 environment to get core dump) Feb 1 07:39:19 openbsd dovecot: auth: Error: static(email@localhost): passdb doesn't support lookups, can't verify user's existence Feb 1 07:39:19 openbsd dovecot: lda: Error: user email@localhost: Auth USER lookup failed Feb 1 07:39:19 openbsd dovecot: lda: Fatal: Internal error occurred. Refer to server log for more information. Feb 1 07:39:19 openbsd postfix/pipe[17487]: 5DBAE5F289: to=<email@localhost>, relay=dovecot, delay=37607, delays=37606/0.02/0/0.67, dsn=4.3.0, status=deferred (temporary failure) # 2.2.10: /etc/dovecot/dovecot.conf # OS: OpenBSD 5.5 i386 ffs auth_debug = yes auth_verbose = yes first_valid_uid = 1000 imap_client_workarounds = delay-newmail tb-extra-mailbox-sep tb-lsub-flags mail_debug = yes mail_location = maildir:/var/vmail/mydomain/%n mbox_write_locks = fcntl mmap_disable = yes namespace inbox { inbox = yes location = mailbox Spam { auto = subscribe } prefix = } passdb { driver = bsdauth } passdb { args = scheme=CRYPT username_format=%u /etc/dovecot/users driver = passwd-file } pop3_client_workarounds = outlook-no-nuls oe-ns-eoh protocols = imap lmtp service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } } ssl_cert = </cert.pem ssl_key = </cert.pem userdb { driver = passwd override_fields = uid=vmail gid=vmail quota_rule=*:storage=1G } userdb { args = username_format=%u /etc/dovecot/users driver = passwd-file override_fields = uid=vmail gid=vmail home=/var/vmail/%d/%u quota_rule=*:storage=1G } verbose_ssl = yes protocol imap { mail_plugins = } (gdb) bt full #0 0x0221be9d in kill () at <stdin>:2 No locals. #1 0x02285e36 in raise (s=6) at /usr/src/lib/libc/gen/raise.c:39 No locals. #2 0x02285d5c in abort () at /usr/src/lib/libc/stdlib/abort.c:70 p = (struct atexit *) 0x7fc2c000 mask = 4294967263 cleanup_called = 1 #3 0x0245dcd4 in default_fatal_finish (type=Variable "type" is not available. ) at failures.c:193 backtrace = Variable "backtrace" is not available. (gdb) bt #0 0x0221be9d in kill () at <stdin>:2 #1 0x02285e36 in raise (s=6) at /usr/src/lib/libc/gen/raise.c:39 #2 0x02285d5c in abort () at /usr/src/lib/libc/stdlib/abort.c:70 #3 0x0245dcd4 in default_fatal_finish (type=Variable "type" is not available. ) at failures.c:193 #4 0x0245dd4d in i_internal_fatal_handler (ctx=0xcfbec0f4, format=0x22406990 "pool_system_realloc(%lu): Out of memory", args=0xcfbec118 "") at failures.c:657 #5 0x0245cee3 in i_fatal_status (status=Could not find the frame base for "i_fatal_status". ) at failures.c:295 #6 0x02475543 in pool_system_realloc (pool=Could not find the frame base for "pool_system_realloc". ) at mempool-system.c:120 #7 0x02464c47 in i_realloc (mem=0x86122000, old_size=134217728, new_size=268435456) at imem.c:14 #8 0x0246505c in pw_init () at ipwd.c:23 #9 0x024651f7 in i_getpwnam (name=0x76941140"email@localhost", pwd_r=0xcfbec1cc) at ipwd.c:51 #10 0x164eef8e in bsdauth_verify_plain (request=0x76941020, password=0x78a183a2 "testi", callback=0x164e0320 <verify_plain_callback>) at passdb-bsdauth.c:26 #11 0x164e0bf4 in auth_worker_input (client=0x7b386460) at auth-worker-client.c:205 #12 0x0246f9c2 in io_loop_call_io (io=0x7d1ae8c0) at ioloop.c:388 #13 0x02470e97 in io_loop_handler_run (ioloop=0x7d1ae3c0) at ioloop-kqueue.c:151 #14 0x0246f928 in io_loop_run (ioloop=0x7d1ae3c0) at ioloop.c:412 #15 0x0241609d in master_service_run (service=0x7e433d00, callback=0x164e66a0 <worker_connected>) at master-service.c:566 #16 0x164e6cc8 in main (argc=Cannot access memory at address 0x0 ) at main.c:393 Current language: auto; currently asm Sincerelly, Jani Hast

2 1

[Dovecot] sqlite queries for master user
by Alan Chandler 14 Feb '14

14 Feb '14

Hi I am trying to achieve the following functionality "usera" can't login because his account is set non active. there is a deny query that checks this. a master user ("masteruser") should be able login using "usera*masteruser" syntax to this disabled account I just tried it with auth_debug set on, but the deny query is being run for usera, presumably because my master definition is passdb { driver = sql master = yes args = /etc/dovecot/sqlite-master.conf # Unless you're using PAM, you probably still want the destination user to # be looked up from passdb that it really exists. pass=yes does that. pass = yes } with pass=yes, and that causes usera to be validated through both the deny and accept phase of authorisation. In the password_query defined in sqlite-master.conf I user '%u' to locate my master user. Is there any variable I could use to (in that query) to also check that "usera" exists? I could then remove the pass = yes, both to avoid two more queries and to avoid the trap that this account is locked out. Alternatively some other parameter in the passdb segment above to tell the other login to miss the deny stage.

1 1

[Dovecot] v2.2.11 released
by Timo Sirainen 13 Feb '14

13 Feb '14

http://dovecot.org/releases/2.2/dovecot-2.2.11.tar.gz http://dovecot.org/releases/2.2/dovecot-2.2.11.tar.gz.sig I haven't had time to read through the Dovecot mailing list yet, so there are likely some reported bugs that haven't been fixed yet. I'll try to get to them next week in San Francisco. (Probably can't get much done this week in Tokyo.) In the mean time here's v2.2.11 with some new features. + acl plugin: Added an alternative global ACL file that can contain mailbox patterns. See http://wiki2.dovecot.org/ACL for details. + imap proxy: Added proxy_nopipelining passdb setting to work around other IMAP servers' bugs (MS Exchange 2013 especially). + Added %{auth_user}, %{auth_username} and %{auth_domain} variables. See http://wiki2.dovecot.org/Variables for details. + Added support for LZ4 compression. + stats: Track also wall clock time for commands. + pop3_migration plugin improvements to try harder to match the UIDLs correctly. - imap: SEARCH/SORT PARTIAL reponses may have been too large. - doveadm backup: Fixed assert-crash when syncing mailbox deletion.

11 15

Re: [Dovecot] Hybrid of linux user accounts and virtual user accounts configuration
by Derek Winterstien 13 Feb '14

13 Feb '14

Murry my mail delivery is working fine. The first message even automatically creates the Maildir structure like it should, all permissions correct. Steffen Kaiser I will place the output of dovecot n at the bottom of this message. I've configured checkpassword which should be a script that comes with dovecot. However, I cant find it in my install. Which I thought was standard. Not sure where to go get it from either. See this error from the log: dovecot: auth: Fatal: execv(/usr/bin/checkpassword) failed: No such file or directory dovecot: auth: Error: checkpassword(foo,127.0.0.1): Child 29179 exited with status 84 And the pop client sees: -ERR [IN-USE] Temporary authentication failure. Isn't it a script rather than a binary? Is it what should be using to read my simple virtual user flat text file? dovecot -n # 2.0.9: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-xxx.xxx.i686 i686 CentOS release 6.4 (Final) auth_failure_delay = 10 secs auth_mechanisms = plain login auth_verbose = yes default_process_limit = 50 disable_plaintext_auth = no listen = * login_greeting = Greetings! mail_location = maildir:~/Maildir mbox_write_locks = fcntl passdb { driver = pam } passdb { args = /usr/bin/checkpassword driver = checkpassword } service auth { unix_listener auth-userdb { group = postfix user = postfix } } ssl_cert = </etc/pki/arj22/certs/d.pem ssl_key = </etc/pki/arj22/private/d.pem userdb { driver = passwd } userdb { driver = prefetch } userdb { args = /etc/dovecot/passwd/%d driver = passwd-file } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } EOF

1 0

[Dovecot] Mailbox storage maintenance tools
by Roman Gelfand 13 Feb '14

13 Feb '14

My storage scheme is Maildir. Could someone point me to tools for maintaining or identifying problems problems with mail store. Also, description of common problems and how to resolve/prevent them. Thanks in advance

2 1

[Dovecot] Storage Quotas
by Roman Gelfand 13 Feb '14

13 Feb '14

My dovecot server storage scheme is Maildir. Is there no default mail box size quota? If yes, where do you set it? Thanks in advance

2 1

[Dovecot] Getting Director Proxy Working
by Murray Trainer 13 Feb '14

13 Feb '14

Hi All, I can't get directory proxying of pop3 and imap working. The director stuff appears to be OK - see below. The ldap authentication is working on the backend mail server. I just get connection refused when I telnet to the proxy on the pop3 and imap ports. Nothing appears to be running on the pop3 and imap ports despite the lines in the config below. I am not sure what to do from here as nothing is showing up in the logs. Some assistance would be greatly appreciated. Thanks Murray # doveadm director status mail server ip vhosts users x.x.x.x 100 0 # doveadm director map user mail server ip expire time # doveconf -n # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.1 auth_cache_size = 32 M auth_cache_ttl = 2 hours auth_debug = yes auth_mechanisms = plain login auth_verbose = yes base_dir = /var/run/dovecot/ director_mail_servers = x.x.x.x director_servers = y.y.y.y disable_plaintext_auth = no mail_debug = yes passdb { args = nopassword=y proxy=y driver = static } service director { fifo_listener login/proxy-notify { mode = 0666 user = $default_login_user } inet_listener { port = 9090 } unix_listener director-userdb { mode = 0600 } unix_listener login/director { mode = 0666 } } service imap-login { executable = imap-login director inet_listener imap { port = 143 } } service pop3-login { executable = pop3-login director inet_listener pop3 { port = 110 } } ssl_cert =

1 2

[Dovecot] can not see public mailbox
by David Mehler 13 Feb '14

13 Feb '14

Hello, I'm running Dovecot2 and trying to set up public mailboxes. I've got a virtual user system set up with postfix and using MySQL authentication. I'm wanting to create several public mailboxes for shared messages. I've followed the wiki and have the public folder created. I've got a folder /home/vmail/public/public1 public1 being the maildir of the public mailbox. I can see in my folder list of my webmail client the root public folder but I can't change in to it and I can not see the public1 public mailbox. I'm using one user vmail set up for this setup, permissions on the public1 folder allow the vmail user to read and execute. In public1 I have a file dovecot-acl which has the user attempting to access the public folder with the flags l and r. Below is my config with doveconf -n. I'd appreciate any suggestions. Thanks. Dave. # 2.1.16: /etc/dovecot/dovecot.conf # OS: Linux 3.12.6-x86-linode55 i686 Fedora release 17 (Beefy Miracle) ext3 dict { quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext } first_valid_gid = 5000 first_valid_uid = 5000 hostname = xxx last_valid_gid = 5000 last_valid_uid = 5000 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes listen = * mail_gid = vmail mail_home = /home/vmail/%d/%n/home mail_location = maildir:/home/vmail/%d/%n:LAYOUT=fs mail_plugins = " acl quota zlib" mail_uid = vmail maildir_very_dirty_syncs = yes namespace { list = yes location = maildir:/home/vmail/public:LAYOUT=fs prefix = Public/ separator = / subscriptions = yes type = public } namespace inbox { hidden = no inbox = yes list = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / subscriptions = yes type = private } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { acl = vfile autocreate = Spam autosubscribe = Spam quota = dict:User quota::proxy::quota quota_rule = *:storage=1G quota_rule2 = Trash:storage=+100M quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=80%% quota-warning 80 %u } postmaster_address = postmaster@xxx protocols = imap service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { mode = 0600 user = vmail } } service dict { unix_listener dict { mode = 0600 user = vmail } } service imap-login { inet_listener imap { address = 127.0.0.1 ::1 } inet_listener imaps { address = xxx xxx ssl = yes } } service quota-warning { executable = script /usr/local/bin/quota-warning.sh user = vmail } ssl_cert = </etc/ssl/certs/server.crt ssl_key = </etc/ssl/private/server.key userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lda { mail_plugins = " acl quota zlib quota" } protocol imap { mail_plugins = " acl quota zlib autocreate imap_acl imap_quota imap_zlib" }

3 2

[Dovecot] Panic on one specific user
by LuKreme 13 Feb '14

13 Feb '14

dovecot: imap(john(a)example.com): Error: /usr/local/virtual/john(a)example.com/dovecot.index: modseq_hdr.log_offset too large dovecot: imap(john(a)example.com): Error: /usr/local/virtual/john(a)example.com/dovecot.index: modseq_hdr.log_offset too large dovecot: imap(john(a)example.com): Panic: file mail-transaction-log-file.c: line 1148 (mail_transaction_log_file_get_highest_modseq_at): assertion failed: (offset <= file->sync_offset) dovecot: imap(john(a)example.com): Fatal: master: service(imap): child 88284 killed with signal 6 (core not dumped - set service imap { drop_priv_before_exec=yes }) and also: dovecot: lda(john(a)southgaylord.com): Error: /usr/local/virtual/john(a)southgaylord.com/dovecot.index: modseq_hdr.log_offset too large dovecot: lda(john(a)southgaylord.com): Error: /usr/local/virtual/john(a)southgaylord.com/dovecot.index: modseq_hdr.log_offset too large dovecot: lda(john(a)southgaylord.com): Panic: file mail-transaction-log-file.c: line 1148 (mail_transaction_log_file_get_highest_modseq_at): assertion failed: (offset <= file->sync_offset) (this block does not generate a fatal error) It doesn't appear to be affecting the user's ability to check mail (or at least no complaints about that). The only instances of "LDA" in my logs are this error. The user is a virtual user in MySQL like all the other virtual, including other users on the domain who do not show this problem. I think I may have posted about this before (last month?), but I haven't found a solution. $ dovecot -n # 2.2.9: /usr/local/etc/dovecot/dovecot.conf # OS: FreeBSD 9.1-RELEASE i386 auth_mechanisms = PLAIN LOGIN disable_plaintext_auth = no first_valid_uid = 89 login_log_format_elements = user=<%u> %r %m %c mail_location = maildir:~/Maildir mail_max_userip_connections = 90 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox NotJunk { auto = subscribe } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { driver = pam } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocols = imap sieve service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } } service imap-login { inet_listener imaps { port = 993 ssl = yes } } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { driver = passwd } userdb { args = /etc/dovecot/dovecot-sql.conf.ext default_fields = uid=vpopmail gid=vchkpw mail_location=/usr/local/virtual/%u mail=maildir:/usr/local/virtual/%u driver = sql } -- The truth isn't easily pinned to a page. In the bathtub of history the truth is harder to hold than soap, and much more difficult to find...

1 2

[Dovecot] one 2.2.11 POP3 thread is enough
by Reindl Harald 12 Feb '14

12 Feb '14

why are people starting now every minute a new thread about the same problem already reported as reply of the release announce? -------- Original-Nachricht -------- Betreff: Re: [Dovecot] v2.2.11 released Datum: Wed, 12 Feb 2014 10:05:17 +0100 Von: Ralf Hildebrandt <Ralf.Hildebrandt(a)charite.de> Antwort an: dovecot(a)dovecot.org An: Dovecot Mailing List <dovecot(a)dovecot.org> * Timo Sirainen <tss(a)iki.fi>: > http://dovecot.org/releases/2.2/dovecot-2.2.11.tar.gz > http://dovecot.org/releases/2.2/dovecot-2.2.11.tar.gz.sig > > I haven't had time to read through the Dovecot mailing list yet, so there are likely some reported bugs that haven't been fixed yet. I'll try to get to them next week in San Francisco. (Probably can't get much done this week in Tokyo.) In the mean time here's v2.2.11 with some new features. > > + acl plugin: Added an alternative global ACL file that can contain > mailbox patterns. See http://wiki2.dovecot.org/ACL for details. > + imap proxy: Added proxy_nopipelining passdb setting to work around > other IMAP servers' bugs (MS Exchange 2013 especially). > + Added %{auth_user}, %{auth_username} and %{auth_domain} variables. > See http://wiki2.dovecot.org/Variables for details. > + Added support for LZ4 compression. > + stats: Track also wall clock time for commands. > + pop3_migration plugin improvements to try harder to match the UIDLs > correctly. > - imap: SEARCH/SORT PARTIAL reponses may have been too large. > - doveadm backup: Fixed assert-crash when syncing mailbox deletion. pop3 keeps crashing with a sigsegv in that version. Gotta go back. Feb 12 10:02:52 postamt dovecot: pop3(mhippler) LJZ31jHyygAKK4EU: Fatal: master: service(pop3): child 14635 killed with signal 11 (core dumped) Feb 12 10:02:54 postamt dovecot: pop3(fem-qm-sfb) HlCP1jHyGgCNKtkP: Fatal: master: service(pop3): child 14692 killed with signal 11 (core dumped)

1 0

[Dovecot] (no subject)
by Axel Reinhold 12 Feb '14

12 Feb '14

Subject: dovecot-2.2.11 crash on quit after update to dovecot-2.2.11 pop3 crashes at QUIT after successful deliver: [axel@bongo axel]$ gdb opt/dovecot-2.2.11-1/sbin/dovecot core.13590 warning: core file may not match specified executable file. Core was generated by `dovecot/pop3 p3postlogin'. Program terminated with signal 11, Segmentation fault. #0 0x0804e601 in main () (gdb) bt #0 0x0804e601 in main () #1 0xbfec7ff0 in ?? () #2 0x0804e7dc in main () #3 0x08050038 in service_anvil_global_deinit () #4 0x0804da9d in get_gid () #5 0x0804dc6c in main () #6 0xb7e2de37 in ?? () #7 0xb7e2f477 in ?? () #8 0xb7e2df24 in ?? () #9 0xb7dc2fbd in ?? () #10 0x0804bf13 in __register_frame_info_bases () #11 0xb7c55ebc in ?? () (gdb) q last part of conversation: pop* [20053] 140212130153 debug8: SMTP< 250 2.1.5 axel... Recipient ok pop* [20053] 140212130153 debug8: SMTP> DATA pop* [20053] 140212130153 debug8: SMTP< 354 Enter mail, end with "." on a line by itself pop* [20053] 140212130153 debug8: SMTP> . pop* [20053] 140212130153 debug8: SMTP< 250 2.0.0 s1CC1rGZ020100 Message accepted for delivery pop* [20053] 140212130153 debug8: SMTP> QUIT pop* [20053] 140212130153 debug8: SMTP< 221 2.0.0 bongo.freakout.de closing connection pop* [20053] 140212130153 debug6: SMTP sent to axel Id:2.0.0 s1CC1rGZ020100 pop* [20053] 140212130153 debug8: POP3> DELE 8 pop* [20053] 140212130153 debug8: POP3< +OK Marked to be deleted. pop* [20053] 140212130153 debug6: POP3 delete 8 pop* [20053] 140212130153 debug8: POP3> QUIT pop* [20053] 140212130153 debug8: POP3< #CRASH pop* [20053] 140212130153 error : POP3 no quit pop* [20053] 140212130153 debug5: POP3 logout Regards Axel

1 0

[Dovecot] Fatal: master: service(pop3): child 20972 killed with signal 11
by Jim Knuth 12 Feb '14

12 Feb '14

Hello, since V 2.2.11 I get that error with pop3. With imap everything is fine. Feb 12 13:06:40 server2 dovecot: pop3-login: Login: user=<user>, method=PLAIN, rip=84.183.42.55, lip=195.137.213.14, mpid=20972, TLS, TLSv1 with cipher AES128-SHA (128/128 bits) Feb 12 13:06:41 server2 dovecot: pop3(user): Fatal: master: service(pop3): child 20972 killed with signal 11 (core dumps disabled) Upgrade/Bugfix is coming? -- Mit freundlichen Grüßen, with kind regards, Jim Knuth --------- Lebenskünstler leben von der Zeit, die andere nicht haben.(Michael Douglas)

1 0

[Dovecot] Order of istream and ostream chains
by Philipp Brüll 12 Feb '14

12 Feb '14

Hi, I'm creating a scrambler plugin, that adds an istream and an ostream to the stream-chain for the mail input/output. It works well until the zlib plugin is added to the configuration. The scrambler should run before the zlib and encrypt the mail before it's compressed. Since, the plugin is named lib18_scrambler_... (and the other lib20_zlib....), that works well when a mail is received. When a mail is read via IMAP, the plugins should handle the mail in the reverse order. So first, the zlib should decompress it and afterwards the scrambler should decrypt it. But it seems, that they work the other way around. The scrambler istream gets compressed data as input. It's hooked in the chain of istream as the following... static int scrambler_istream_opened(struct mail *_mail, struct istream **stream) { struct mail_private *mail = (struct mail_private *)_mail; union mail_module_context *mmail = SCRAMBLER_MAIL_CONTEXT(mail); struct istream *input, *inputs[2]; input = *stream; *stream = scrambler_istream_create(input); i_stream_unref(&input); return mmail->super.istream_opened(_mail, stream); } static void scrambler_mail_allocated(struct mail *_mail) { struct mail_private *mail = (struct mail_private *)_mail; struct mail_vfuncs *v = mail->vlast; union mail_module_context *mmail; mmail = p_new(mail->pool, union mail_module_context, 1); mmail->super = *v; mail->vlast = &mmail->super; v->istream_opened = scrambler_istream_opened; MODULE_CONTEXT_SET_SELF(mail, scrambler_mail_module, mmail); } How can I reverse the order of istreams? Should I use another hook or vfuns? I'm stuck in the problem for a while now, so any help would be very welcome. Best regards, Philipp

2 3

[Dovecot] Crash in recent dovecot, different line (with Backtrace:dovecot/pop3)
by Ralf Hildebrandt 12 Feb '14

12 Feb '14

Reading symbols from /usr/local/dovecot-2.2/libexec/dovecot/pop3...done. [New LWP 17294] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib/i386-linux-gnu/i686/cmov/libthread_db.so.1". Core was generated by `dovecot/pop3'. Program terminated with signal 11, Segmentation fault. #0 0x0804eb6a in client_update_mails (client=client@entry=0x82017a0) at pop3-commands.c:256 256 ret = FALSE; #0 0x0804eb6a in client_update_mails (client=client@entry=0x82017a0) at pop3-commands.c:256 search_args = <optimized out> ctx = <optimized out> mail = 0xb759a797 deleted_msgs = {arr = {buffer = 0x81e2098, element_size = 8}, v = 0x81e2098, v_modifiable = 0x81e2098} seen_msgs = {arr = {buffer = 0xb75de224, element_size = 3076002107}, v = 0xb75de224, v_modifiable = 0xb75de224} msgnum = <optimized out> bit = 1 #1 0x0804ee80 in cmd_quit (client=0x82017a0, args=<optimized out>) at pop3-commands.c:289 No locals. #2 client_command_execute (client=client@entry=0x82017a0, name=<optimized out>, name@entry=0x823e08c "QUIT", args=args@entry=0x804f839 "") at pop3-commands.c:920 No locals. #3 0x0804d5f1 in client_handle_input (client=0x82017a0) at pop3-client.c:739 _data_stack_cur_id = 3 line = 0x823e08c "QUIT" args = <optimized out> ret = <optimized out> #4 0xb7585d44 in io_loop_call_io (io=0x8200a80) at ioloop.c:388 ioloop = 0x81ea490 t_id = 2 #5 0xb7586e0e in io_loop_handler_run (ioloop=ioloop@entry=0x81ea490) at ioloop-epoll.c:220 ctx = 0x81eb178 events = 0x0 event = 0x81eb1b8 list = 0x81ebaa0 io = <optimized out> tv = {tv_sec = 9, tv_usec = 999652} events_count = 0 msecs = <optimized out> ret = 1 i = <optimized out> j = <optimized out> call = <optimized out> __FUNCTION__ = "io_loop_handler_run" #6 0xb75857d8 in io_loop_run (ioloop=0x81ea490) at ioloop.c:412 __FUNCTION__ = "io_loop_run" #7 0xb752ad7e in master_service_run (service=0x81ea3b8, callback=callback@entry=0x804b940 <client_connected>) at master-service.c:566 No locals. #8 0x0804bd05 in main (argc=1, argv=0x81ea1e0) at main.c:277 set_roots = {0x80504c0, 0x0} login_set = { auth_socket_path = 0x81e2048 "/usr/local/dovecot-2.2/var/run/dovecot/auth-master", postlogin_socket_path = 0x0, postlogin_timeout_secs = 60, callback = 0x804b800 <login_client_connected>, failure_callback = 0x804b7c0 <login_client_failed>, request_auth_token = 0} service_flags = <optimized out> storage_service_flags = <optimized out> username = 0x0 c = <optimized out> -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

2 1

[Dovecot] personal sieve script not included
by Thomas Krause 12 Feb '14

12 Feb '14

Hello, I'm using dovecot 2.2.10 and roundcube (with managesieve enabled). Sieve filtering works well, as long the rule is written into ~/.dovecot.sieve (which is a link to ~/sieve/managesieve.sieve) When adding a new filter set (in roundcube) the script is written to ~/sieve/newfilterset.sieve. This script will not be executed. How can I solve this? I set sieve_dir = ~/sieve This should work, except I misunderstand the doc. # ls -l ./sieve total 6 -rw------- 1 vmail mail 105 Feb 5 09:24 managesieve.sieve -rw------- 1 vmail mail 113 Feb 4 16:30 test.sieve drwx------ 2 vmail mail 512 Feb 5 09:24 tmp Regards, Thomas.

3 5

[Dovecot] Problem rebuilding Centos 5/6 pigeonhole RPM from mercurial version
by Juan C. Blanco 12 Feb '14

12 Feb '14

Hi Stephan, I'm traying to rebuild the RH (Centos) EL5 and EL6 RPM with the last mercurial pigeonhole 0.4.2 version, but I'm having problems with the build. I think that I've isolated the problem outside rpmbuild context. I've downloaded dovecot and pigeonhole mercurial versions and built dovecot with the commands: dovecot-2.2.10$ ./autogen.sh dovecot-2.2.10$ ./configure INSTALL_DATA="install -c -p -m644" --enable-header-install --disable-static --with-nss --with-shadow --with-pam --with-gssapi=plugin --with-ldap=plugin --with-sql=plugin --with-mysql --with-zlib --with-sql-drivers --with-libcap --with-db --with-ssl=openssl --with-ssldir=/etc/pki/dovecot --with-notify=inotify --with-solr --with-docs dovecot-2.2.10$ make dovecot-2.2.10$ make install DESTDIR=/var/tmp/dovecot after that, building pigeonhole with the commands pigeonhole-0.4.2$ ./autogen.sh pigeonhole-0.4.2$ ./configure INSTALL_DATA="install -c -p -m644" --build=x86_64-redhat-linux-gnu --host=x86_64-redhat-linux-gnu --target=x86_64-redhat-linux-gnu --program-prefix= --prefix=/usr --exec-prefix=/usr --bindir=/usr/bin --sbindir=/usr/sbin --sysconfdir=/etc --datadir=/usr/share --includedir=/usr/include --libdir=/usr/lib64 --libexecdir=/usr/libexec --localstatedir=/var --sharedstatedir=/usr/com --mandir=/usr/share/man --infodir=/usr/share/info --with-dovecot=/var/tmp/dovecot --with-managesieve=yes pigeonhole-0.4.2$ make pigeonhole-0.4.2$ make install DESTDIR=/var/tmp/dovecot works fine, but if I install pigeonhole in a different path, i.e. pigeonhole-0.4.2$ make install DESTDIR=/var/tmp/pigeonhole I get the following error make[4]: Entering directory `/home/jc/pigeonhole-0.4.2/src/lib-sieve' make[4]: Nothing to be done for `install-exec-am'. test -z "/usr/lib64/dovecot" || mkdir -p -- "/var/tmp/pigeonhole/usr/lib64/dovecot" /bin/sh ../../libtool --mode=install /usr/bin/install -c 'libdovecot-sieve.la' '/var/tmp/pigeonhole/usr/lib64/dovecot/libdovecot-sieve.la' libtool: install: warning: relinking `libdovecot-sieve.la' (cd /home/jc/pigeonhole-0.4.2/src/lib-sieve; /bin/sh ../../libtool --tag=CC --mode=relink gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -Wstrict-aliasing=2 -I/usr/kerberos/include -o libdovecot-sieve.la -rpath /usr/lib64/dovecot sieve-settings.lo sieve-message.lo sieve-smtp.lo sieve-lexer.lo sieve-script.lo sieve-script-file.lo sieve-script-dict.lo sieve-ast.lo sieve-binary.lo sieve-binary-file.lo sieve-binary-code.lo sieve-binary-debug.lo sieve-parser.lo sieve-address.lo sieve-validator.lo sieve-generator.lo sieve-interpreter.lo sieve-runtime-trace.lo sieve-code-dumper.lo sieve-binary-dumper.lo sieve-result.lo sieve-error.lo sieve-objects.lo sieve-stringlist.lo sieve-comparators.lo sieve-match-types.lo sieve-address-parts.lo sieve-match.lo sieve-commands.lo sieve-code.lo sieve-actions.lo sieve-extensions.lo sieve-plugins.lo cmp-i-octet.lo cmp-i-ascii-casemap.lo mcht-is.lo mcht-contains.lo mcht-matches.lo tst-truefalse.lo tst-not.lo tst-anyof.lo tst-allof.lo tst-address.lo tst-header.lo tst-exists.lo tst-size.lo cmd-require.lo cmd-stop.lo cmd-if.lo cmd-keep.lo cmd-redirect.lo cmd-discard.lo ext-fileinto.lo ext-reject.lo ext-envelope.lo ext-encoded-character.lo sieve.lo ../../src/lib-sieve/plugins/vacation/libsieve_ext_vacation.la ../../src/lib-sieve/plugins/subaddress/libsieve_ext_subaddress.la ../../src/lib-sieve/plugins/comparator-i-ascii-numeric/libsieve_ext_comparator-i-ascii-numeric.la ../../src/lib-sieve/plugins/relational/libsieve_ext_relational.la ../../src/lib-sieve/plugins/regex/libsieve_ext_regex.la ../../src/lib-sieve/plugins/copy/libsieve_ext_copy.la ../../src/lib-sieve/plugins/imap4flags/libsieve_ext_imap4flags.la ../../src/lib-sieve/plugins/include/libsieve_ext_include.la ../../src/lib-sieve/plugins/body/libsieve_ext_body.la ../../src/lib-sieve/plugins/variables/libsieve_ext_variables.la ../../src/lib-sieve/plugins/enotify/libsieve_ext_enotify.la ../../src/lib-sieve/plugins/notify/libsieve_ext_notify.la ../../src/lib-sieve/plugins/environment/libsieve_ext_environment.la ../../src/lib-sieve/plugins/mailbox/libsieve_ext_mailbox.la ../../src/lib-sieve/plugins/date/libsieve_ext_date.la ../../src/lib-sieve/plugins/spamvirustest/libsieve_ext_spamvirustest.la ../../src/lib-sieve/plugins/ihave/libsieve_ext_ihave.la ../../src/lib-sieve/plugins/editheader/libsieve_ext_editheader.la ../../src/lib-sieve/plugins/vnd.dovecot/debug/libsieve_ext_debug.la ../../src/lib-sieve/plugins/vnd.dovecot/duplicate/libsieve_ext_duplicate.la ../../src/lib-sieve/util/libsieve_util.la /home/jc/dovecot-2.2.10/src/lib-lda/libdovecot-lda.la /home/jc/dovecot-2.2.10/src/lib-storage/libdovecot-storage.la /home/jc/dovecot-2.2.10/src/lib-imap-storage/libimap-storage.la /home/jc/dovecot-2.2.10/src/lib-dovecot/libdovecot.la -export-dynamic -ldl -lrt -inst-prefix-dir /var/tmp/pigeonhole) gcc -shared .libs/sieve-settings.o .libs/sieve-message.o .libs/sieve-smtp.o .libs/sieve-lexer.o .libs/sieve-script.o .libs/sieve-script-file.o .libs/sieve-script-dict.o .libs/sieve-ast.o .libs/sieve-binary.o .libs/sieve-binary-file.o .libs/sieve-binary-code.o .libs/sieve-binary-debug.o .libs/sieve-parser.o .libs/sieve-address.o .libs/sieve-validator.o .libs/sieve-generator.o .libs/sieve-interpreter.o .libs/sieve-runtime-trace.o .libs/sieve-code-dumper.o .libs/sieve-binary-dumper.o .libs/sieve-result.o .libs/sieve-error.o .libs/sieve-objects.o .libs/sieve-stringlist.o .libs/sieve-comparators.o .libs/sieve-match-types.o .libs/sieve-address-parts.o .libs/sieve-match.o .libs/sieve-commands.o .libs/sieve-code.o .libs/sieve-actions.o .libs/sieve-extensions.o .libs/sieve-plugins.o .libs/cmp-i-octet.o .libs/cmp-i-ascii-casemap.o .libs/mcht-is.o .libs/mcht-contains.o .libs/mcht-matches.o .libs/tst-truefalse.o .libs/tst-not.o .libs/tst-anyof.o .libs/tst-allof.o .libs/tst-address.o .libs/tst-header.o .libs/tst-exists.o .libs/tst-size.o .libs/cmd-require.o .libs/cmd-stop.o .libs/cmd-if.o .libs/cmd-keep.o .libs/cmd-redirect.o .libs/cmd-discard.o .libs/ext-fileinto.o .libs/ext-reject.o .libs/ext-envelope.o .libs/ext-encoded-character.o .libs/sieve.o -Wl,--whole-archive ../../src/lib-sieve/plugins/vacation/.libs/libsieve_ext_vacation.a ../../src/lib-sieve/plugins/subaddress/.libs/libsieve_ext_subaddress.a ../../src/lib-sieve/plugins/comparator-i-ascii-numeric/.libs/libsieve_ext_comparator-i-ascii-numeric.a ../../src/lib-sieve/plugins/relational/.libs/libsieve_ext_relational.a ../../src/lib-sieve/plugins/regex/.libs/libsieve_ext_regex.a ../../src/lib-sieve/plugins/copy/.libs/libsieve_ext_copy.a ../../src/lib-sieve/plugins/imap4flags/.libs/libsieve_ext_imap4flags.a ../../src/lib-sieve/plugins/include/.libs/libsieve_ext_include.a ../../src/lib-sieve/plugins/body/.libs/libsieve_ext_body.a ../../src/lib-sieve/plugins/variables/.libs/libsieve_ext_variables.a ../../src/lib-sieve/plugins/enotify/.libs/libsieve_ext_enotify.a ../../src/lib-sieve/plugins/notify/.libs/libsieve_ext_notify.a ../../src/lib-sieve/plugins/environment/.libs/libsieve_ext_environment.a ../../src/lib-sieve/plugins/mailbox/.libs/libsieve_ext_mailbox.a ../../src/lib-sieve/plugins/date/.libs/libsieve_ext_date.a ../../src/lib-sieve/plugins/spamvirustest/.libs/libsieve_ext_spamvirustest.a ../../src/lib-sieve/plugins/ihave/.libs/libsieve_ext_ihave.a ../../src/lib-sieve/plugins/editheader/.libs/libsieve_ext_editheader.a ../../src/lib-sieve/plugins/vnd.dovecot/debug/.libs/libsieve_ext_debug.a ../../src/lib-sieve/plugins/vnd.dovecot/duplicate/.libs/libsieve_ext_duplicate.a ../../src/lib-sieve/util/.libs/libsieve_util.a /home/jc/dovecot-2.2.10/src/lib-imap-storage/.libs/libimap-storage.a -Wl,--no-whole-archive -Wl,--rpath -Wl,/usr/lib64/dovecot -L/home/jc/dovecot-2.2.10/src/lib-storage/.libs -L/home/jc/dovecot-2.2.10/src/lib-dovecot/.libs -L/var/tmp/pigeonhole/usr/lib64/dovecot -L/usr/lib64/dovecot -ldovecot-lda -ldovecot-storage -ldovecot -ldl -lrt -Wl,-soname -Wl,libdovecot-sieve.so.0 -o .libs/libdovecot-sieve.so.0.0.0 /usr/bin/ld: cannot find -ldovecot-lda collect2: ld returned 1 exit status libtool: install: error: relink `libdovecot-sieve.la' with the above command before installing it make[4]: *** [install-dovecot_pkglibLTLIBRARIES] Error 1 make[4]: Leaving directory `/home/jc/pigeonhole-0.4.2/src/lib-sieve' make[3]: *** [install-am] Error 2 make[3]: Leaving directory `/home/jc/pigeonhole-0.4.2/src/lib-sieve' make[2]: *** [install-recursive] Error 1 make[2]: Leaving directory `/home/jc/pigeonhole-0.4.2/src/lib-sieve' make[1]: *** [install-recursive] Error 1 make[1]: Leaving directory `/home/jc/pigeonhole-0.4.2/src' Note that in the link command there are library paths for -L/home/jc/dovecot-2.2.10/src/lib-storage/.libs -L/home/jc/dovecot-2.2.10/src/lib-dovecot/.libs while there is not an equivalent one for the libdovecot-lda -Lhome/jc/dovecot-2.2.10/src/lib-lda/.libs Perhaps some problem with libtool is not generating the right library paths? In the first case, since dovecot and pigeonhole where installed in the same path, the library was found in the installation path -L/var/tmp/pigeonhole/usr/lib64/dovecot but in the second case (the normal if building two separate rpm) the pigeonhole installation path does not contains the dovecot libaries. I'm not a developper and am not familiar enough with libtool, so I'm not able to determine the reason of the error since the DEPENDENCIES and LIBADD definitions in src/lib-sieve/Makefile.am seems to be correct ibdovecot_sieve_la_DEPENDENCIES = \ $(plugins) \ $(top_builddir)/src/lib-sieve/util/libsieve_util.la \ $(LIBDOVECOT_LDA_DEPS) \ $(LIBDOVECOT_STORAGE_DEPS) \ $(LIBDOVECOT_DEPS) libdovecot_sieve_la_LIBADD = \ $(plugins) \ $(top_builddir)/src/lib-sieve/util/libsieve_util.la \ $(LIBDOVECOT_LDA) \ $(LIBDOVECOT_STORAGE) \ $(LIBDOVECOT) I apologize for the long message, hope you can help on this. Regards Juan C. Blanco-- +----------------------------------------------------------------+ | Juan C. Blanco | | | | Centro de Calculo | | | Facultad de Informatica U.P.M. | E-mail: jcblanco(a)fi.upm.es | | Campus de Montegancedo | | | Boadilla del Monte | Tel.: (+34) 91 336 7466 | | 28660 MADRID (Spain) | Fax : (+34) 91 336 6913 | +----------------------------------------------------------------+

2 2

[Dovecot] Crash in pop3 with recent dovecot, backtrace
by Ralf Hildebrandt 12 Feb '14

12 Feb '14

Core was generated by `dovecot/pop3'. Program terminated with signal 11, Segmentation fault. #0 0x0804eb6a in client_update_mails (client=client@entry=0x8afd7a8) at pop3-commands.c:256 256 seq_range_array_add(&deleted_msgs, client->msgnum_to_seq_map[msgnum]); #0 0x0804eb6a in client_update_mails (client=client@entry=0x8afd7a8) at pop3-commands.c:256 search_args = <optimized out> ctx = <optimized out> mail = 0xb762d797 deleted_msgs = {arr = {buffer = 0x8ade098, element_size = 8}, v = 0x8ade098, v_modifiable = 0x8ade098} seen_msgs = {arr = {buffer = 0xb7671224, element_size = 3076604219}, v = 0xb7671224, v_modifiable = 0xb7671224} msgnum = <optimized out> bit = 1 #1 0x0804ee80 in cmd_quit (client=0x8afd7a8, args=<optimized out>) at pop3-commands.c:289 No locals. #2 client_command_execute (client=client@entry=0x8afd7a8, name=<optimized out>, name@entry=0x8b3e194 "QUIT", args=args@entry=0x804f839 "") at pop3-commands.c:920 No locals. #3 0x0804d5f1 in client_handle_input (client=0x8afd7a8) at pop3-client.c:739 _data_stack_cur_id = 3 line = 0x8b3e194 "QUIT" args = <optimized out> ret = <optimized out> #4 0xb7618d44 in io_loop_call_io (io=0x8afca88) at ioloop.c:388 ioloop = 0x8ae6498 t_id = 2 #5 0xb7619e0e in io_loop_handler_run (ioloop=ioloop@entry=0x8ae6498) at ioloop-epoll.c:220 ctx = 0x8ae7180 events = 0x0 event = 0x8ae71c0 list = 0x8ae7aa8 io = <optimized out> tv = {tv_sec = 9, tv_usec = 999871} events_count = 0 msecs = <optimized out> ret = 1 i = <optimized out> j = <optimized out> call = <optimized out> __FUNCTION__ = "io_loop_handler_run" #6 0xb76187d8 in io_loop_run (ioloop=0x8ae6498) at ioloop.c:412 __FUNCTION__ = "io_loop_run" #7 0xb75bdd7e in master_service_run (service=0x8ae63c0, callback=callback@entry=0x804b940 <client_connected>) at master-service.c:566 No locals. #8 0x0804bd05 in main (argc=1, argv=0x8ae61e0) at main.c:277 set_roots = {0x80504c0, 0x0} login_set = { auth_socket_path = 0x8ade048 "/usr/local/dovecot-2.2/var/run/dovecot/auth-master", postlogin_socket_path = 0x0, postlogin_timeout_secs = 60, callback = 0x804b800 <login_client_connected>, failure_callback = 0x804b7c0 <login_client_failed>, request_auth_token = 0} service_flags = <optimized out> storage_service_flags = <optimized out> username = 0x0 c = <optimized out> -- Ralf Hildebrandt Geschäftsbereich IT | Abteilung Netzwerk Charité - Universitätsmedizin Berlin Campus Benjamin Franklin Hindenburgdamm 30 | D-12203 Berlin Tel. +49 30 450 570 155 | Fax: +49 30 450 570 962 ralf.hildebrandt(a)charite.de | http://www.charite.de

1 0

[Dovecot] Fatal: All your namespaces have a location setting.
by Zbyszek Żółkiewski 12 Feb '14

12 Feb '14

Hello, I am trying to setup dovecot sync between 2 servers and come up with this error: Fatal: All your namespaces have a location setting. It should be empty (default mail_location) in the namespace to be converted. i am stuck with this as i cannot find any resolution on the web, here are my config details: doveconf -n # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.4 disable_plaintext_auth = no dsync_remote_cmd = ssh -l%{login} %{host} doveadm dsync-server -u%u mail_plugins = " notify replication" mail_privileged_group = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } plugin { autocreate = Trash autocreate2 = Sent autosubscribe = Trash autosubscribe2 = Sent mail_replica = remote:vmail@some-mx2.com } protocols = imap lmtp sieve service aggregator { fifo_listener replication-notify-fifo { user = vmail } unix_listener replication-notify { user = vmail } } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } } service replicator { process_min_avail = 1 unix_listener replicator-doveadm { mode = 0600 } } ssl = required ssl_cert = </etc/ssl/certs/some-mx.pem ssl_key = </etc/ssl/private/some-mx.key userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } protocol imap { mail_plugins = " autocreate" } protocol lmtp { hostname = some-mx.com mail_plugins = sieve postmaster_address = postmaster(a)some-mx.com } cat dovecot-sql.conf driver = pgsql connect = host=/var/run/postgresql/ dbname=mail user=mailreader default_pass_scheme = SHA512 password_query = SELECT email as user, password, '/home/mailboxes/maildir/'||maildir as userdb_home, 500 as userdb_uid, 500 as userdb_gid FROM users WHERE email = '%u' user_query = SELECT '/home/mailboxes/maildir/'||maildir as home, 500 as uid, 500 as gid FROM users WHERE email = '%u'; Any help will be appreciated! thanks, __ Zbyszek

1 2