- dovecot - dovecot.org

[Dovecot] userdb section not recognized in dovecot.conf. Help?
by CypherPunk 06 Feb '14

06 Feb '14

I'm following a tutorial[1] on how to configure dovecot and the tutorial says to insert the following configuration options into the dovecot.conf file: disable_plaintext_auth = no mail_privileged_group = mail mail_location = mbox:~/mail:INBOX=/var/mail/%u userdb { driver = passwd } This seems to have worked for a lot of others using this tutorial but not for me. When I try to start dovecot, I am told that the section at userdb is an unknown section type. I've spent the last few hours on Google searching this out and I've gotten conflicting answers that don't make sense. Is this the proper way to use the userdb directive? For information, I've also tried userdb{ driver = passwd-file } and that didn't work either. So I'm assuming that perhaps userdb is deprecated somehow but I don't know what to replace it with. Can someone point me in the right direction? Many Thanks! CypherPunk [1] https://www.digitalocean.com/community/articles/how-to-set-up-a-postfix-e-m…

2 1

[Dovecot] Debian Wheezy-Backports - Dovecot (1:2.2.9-1~bpo70+1) missing xz compression support?
by T.B. 05 Feb '14

05 Feb '14

Hallo Everyone, since some days a new dovecot version is available in Debian "wheezy-backports": (1:2.2.9-1~bpo70+1) wheezy-backports As described in http://wiki2.dovecot.org/Plugins/Zlib and http://www.dovecot.org/doc/NEWS-2.2 "xz"-compression is available since Dovecot version 2.2.9. Today I tried to convert my mailboxes with the new xz compression. Therfore I changed my config as follows: /etc/dovecot/conf.d/10-mail.conf: # Space separated list of plugins to load for all services. Plugins specific to IMAP, LDA, etc. are added to this list in their own .conf files. mail_plugins = zlib acl fts fts_solr /etc/dovecot/conf.d/90-plugin.conf: # Enable these only if you want compression while saving: zlib_save_level = 9 # 1..9 zlib_save = xz # gz or bz2 or xy Now I tried to convert my mailboxes - but somehow, something goes wrong: root@SERVER:/# dovecot --version 2.2.9 root@SERVER:/# dsync mirror mdbox:/srv/converted_vmail/ doveadm(root): Error: zlib_save: Support not compiled in for handler: xz dsync(root): Error: zlib_save: Support not compiled in for handler: xz Where is the failure? Did the packet maintainer forget to activate xz? I can't find anything xz related in the debian package changelog: http://metadata.ftp-master.debian.org/changelogs//main/d/dovecot/dovecot_2.… Should I contact the Debian packet maintainer? http://packages.qa.debian.org/d/dovecot.html Best regards T.B.

2 2

[Dovecot] How to archive mails on different server
by Anant Saraswat 05 Feb '14

05 Feb '14

Hi Guys, I want to make some new changes to my exim mail server So if any user archive his/her mail they will save on any other server not on Exim server , and whenever user want to search for any old mail he will go to archive folder and can search it from there.... So basically i want to setup a diffrent server for archiving and want to connect it to my Exim server. So whevever user archive his/her mail it will autometically save to diffrent server. So is it possible using any plugin , or something else . I am using Roundcube,Exim 4.72, Dovecot(LMTP). Regards, Anant Saraswat

2 1

[Dovecot] imap2json
by Kai Hendry 05 Feb '14

05 Feb '14

Hi there, I've started work on a side project that I've been long wanting to do; better HTML archives of email. https://github.com/kaihendry/imap2json I'm just designing the JSON schema atm, and I thought it would be good to get your feedback (Esp Timo) before I make a horrible mistake. https://github.com/kaihendry/imap2json/blob/master/JSON-design.mdwn Is it a good idea to base the id of a converation by the sha1sum of the first message for example? Any other tips or words of encouragement would be great. Kind regards,

1 1

[Dovecot] Dovecot 2.2.10 shared mailbox
by Florin Portase 05 Feb '14

05 Feb '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Well, after some debugging I've decided to do some more changes: namespace { type = public prefix = Shared. separator = . list = children location = maildir:/home/vpopmail/Public/Maildir subscriptions = yes inbox = no } So, WORKING againg!! Question is: is namespace = shared deprecated ???????? -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQEcBAEBAgAGBQJS8fx2AAoJECEzxtLP+204oAIIAMnElUi3izL/ytiDROGjVJl4 RdWkKb+2x55ANfNbB+tbMaG5CmCUi0qfS0Z6K2pKke/UxnR4RAWVZGxZ7ESl0MIs LtHKt1uv/pnoR4htO+QhloYIBzbs9Cpf8Nu7sWaxOsWl6Y7m3p9FqNvLBFYrzVsM Yx/G85GCyAlPHtpBuCtbNtLsuc4Oeh+cXbYMAu3+YiTcU9VB3Dhw21ViI3PgglYV Ffz/J+xtkvvNlcvmxX4Aqspv1LHK76nvBnYN/pDDHAgJNyGl0pOqo9HjVKZAlFZP Rg25EpuoaMZhHIMB2R5EAIHQddzBOqQc2OrWognvmB+7e+8qUtQMjpougamPg8w= =Y/hd -----END PGP SIGNATURE-----

1 0

[Dovecot] Applying a DNS RBL to deny authentication?
by Marc Perkel 05 Feb '14

05 Feb '14

Hope to get some attention about this idea to reduce hacking passwords. Here is a list of about 700,000 IP addresses that are hacking passwords through SMTP AUTH http://ipadmin.junkemailfilter.com/auth-hack.txt This is a list of IP addresses that attempted to authenticate against my fake AUTH advertizing on servers with no authentication. We do front end spam filtering for thousands of domains and I decided to advertize authentication where there is none and I accept and blackhole all authenticated email to those servers. I have harvested the IP addresses in this list that is available through an RBL. It seems to me that a nice dovecot feature would be the ability to do a black list check against IP addresses connecting and deny access if listed. Thoughts?

4 3

Re: [Dovecot] Dovecot 2.2.10 shared mailbox
by Joseph Tam 05 Feb '14

05 Feb '14

Florin Portase writes: > type of error: COREDUMP > Feb 04 11:49:59 imap(portase.florin(a)medianetork.ro): Fatal: master: > service(imap): child 23391 killed with signal 11 (core dumped) > > Disabling of shared mailbox results in correct functioning of dovecot. > To mention again: dovecot version previous to 2.2 was working OK. Debugging of this sort usually requires submitting a core dump traceback http://dovecot.org/bugreport.html This might be a known issue (check the Dovecot archives). Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] dsync backup; compressed to uncompressed
by Michael Smith (DF) 05 Feb '14

05 Feb '14

I need to backup some of the mailboxes on our system. We are currently using mdbox with zlib compression plugin. The backups need to be maildir without compression. How can I accomplish this using dsync? The following just causes each msg file in maildir to be compressed as well. dsync -f -u user1 backup maildir:/var/tmp/user1 While this just causes the dsync to fail while spewing a bunch of errors because it can no longer read the compressed mdbox files. dsync -f -u user1 -o mail_plugins= backup maildir:/var/tmp/user1 # doveconf -n # 2.2.4: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-279.19.1.el6.x86_64 x86_64 CentOS release 6.3 (Final) auth_debug = yes auth_debug_passwords = yes auth_default_realm = domain1.net auth_master_user_separator = * auth_mechanisms = plain login auth_verbose = yes auth_verbose_passwords = plain debug_log_path = /var/log/dovecot-debug.log disable_plaintext_auth = no dotlock_use_excl = no lda_mailbox_autocreate = yes lock_method = dotlock mail_access_groups = mail mail_debug = yes mail_fsync = always mail_location = mdbox:~/mail:INDEX=~/index mail_plugins = quota zlib mail_privileged_group = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mbox_read_locks = dotlock mbox_write_locks = dotlock mdbox_rotate_interval = 1 weeks mdbox_rotate_size = 20 M mmap_disable = yes namespace { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = separator = / type = private } passdb { args = /etc/dovecot/dovecot-sql-master.conf.ext driver = sql master = yes pass = yes } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { autosubscribe = Trash autosubscribe2 = Junk autosubscribe3 = Drafts autosubscribe4 = Sent autosubscribe5 = INBOX mail_max_userip_connections = 10 managesieve_max_line_length = 65536 quota = dict:User quota::file:%h/dovecot.quota quota2_rule = Trash:storage=+10%% quota3_rule = Junk:storage=+20%% quota_rule = *:storage=100M:messages=100000 recipient_delimiter = + sieve_before = /var/opt/mail/global.sieve/ zlib_save = gz zlib_save_level = 9 } pop3_reuse_xuidl = yes protocols = imap pop3 sieve lmtp service auth { inet_listener auth { port = 113 } unix_listener auth-userdb { user = nobody } } service lmtp { inet_listener lmtp { port = 24 } process_min_avail = 10 service_count = 1 } service managesieve-login { inet_listener sieve { port = 4190 } process_min_avail = 0 service_count = 1 vsz_limit = 64 M } ssl = no ssl_cert = </etc/pki/dovecot/certs/dovecot.pem ssl_key = </etc/pki/dovecot/private/dovecot.pem userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lda { mail_plugins = quota zlib sieve } protocol imap { mail_plugins = quota zlib imap_quota } protocol sieve { mail_max_userip_connections = 10 mail_plugins = quota zlib managesieve_max_line_length = 65536 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date } protocol lmtp { mail_plugins = quota zlib sieve }

2 2

[Dovecot] BLF-CRYPT passwords
by KT Walrus 04 Feb '14

04 Feb '14

I’m using the Dovecot Enterprise Edition on Centos 6.5, but Blowfish password hashes don’t seem to work. What can I do to enable Blowfish hashes for passwords? Maybe I don’t have my installation configured properly? Note that I really want to use the existing Blowfish hashes in my MySQL database for Dovecot Authentication. The hashes are generated by PHP crypt() that has Blowfish support built-in. I looked at PHP’s sources, and PHP uses crypt_blowfish.c from http://www.openwall.com/crypt/. This code is in the public domain and could easily be used by Dovecot to support Blowfish passwords on all platforms (if Dovecot doesn’t already support Blowfish on all platforms). Kevin

2 1

[Dovecot] Namespace Mistake
by Silvio Siefke 04 Feb '14

04 Feb '14

Hello, i try to setup the Dovecot Tutorial on http://wiki2.dovecot.org/HowTo/VirtualUserFlatFilesPostfix But when send message i become the follow error message: <dovecot.log> Feb 03 18:06:09 lmtp(8386, webmaster(a)silviosiefke.com) Error: user webmaster(a)silviosiefke.com: Initialization failed: namespace configuration error: Duplicate namespace prefix: "" <dovecot-debug.log> Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: Effective uid=5000, gid=5000, home=/var/vmail/silviosiefke.de/webmaster Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: acl: No acl_shared_dict setting - shared mailbox listing is disabled Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: Namespace : type=private, prefix=, sep=/, inbox=yes, hidden=no, list=yes, subscriptions=yes location=maildir:~/maildir Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: maildir++: root=/var/vmail/silviosiefke.de/webmaster/maildir, index=, indexpvt=, control=, inbox=/var/vmail/silviosiefke.de/webmaster/maildir, alt= Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: acl: initializing backend with data: vfile:/var/vmail/conf.d/silviosiefke.de/acls:cache_secs=300 Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: acl: acl username = webmaster(a)silviosiefke.de Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: acl: owner = 1 Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: acl vfile: Global ACL directory: /var/vmail/conf.d/silviosiefke.de/acls Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: Namespace : type=public, prefix=Public/, sep=/, inbox=no, hidden=no, list=yes, subscriptions=no location=maildir:/var/vmail/public:LAYOUT=fs:INDEX=~/public Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: fs: root=/var/vmail/public, index=/var/vmail/silviosiefke.de/webmaster/public, indexpvt=, control=, inbox=, alt= Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: acl: initializing backend with data: vfile:/var/vmail/conf.d/silviosiefke.de/acls:cache_secs=300 Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: acl: acl username = webmaster(a)silviosiefke.de Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: acl: owner = 0 Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: acl vfile: Global ACL directory: /var/vmail/conf.d/silviosiefke.de/acls Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: Namespace inbox: type=private, prefix=, sep=, inbox=no, hidden=no, list=yes, subscriptions=yes location=maildir:~/maildir Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: maildir++: root=/var/vmail/silviosiefke.de/webmaster/maildir, index=, indexpvt=, control=, inbox=, alt= Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: acl: initializing backend with data: vfile:/var/vmail/conf.d/silviosiefke.de/acls:cache_secs=300 Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: acl: acl username = webmaster(a)silviosiefke.de Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: acl: owner = 1 Feb 03 18:06:09 lmtp(8389, webmaster(a)silviosiefke.de) Debug: acl vfile: Global ACL directory: /var/vmail/conf.d/silviosiefke.de/acls <mail.log> Feb 3 18:06:09 ks3374456 postfix/lmtp[8384]: E529E2452CC: to=<webmaster(a)silviosiefke.com>, relay=ks3374456.kimsufi.com[private/dovecot-lmtp], delay=350, delays=350/0.02/0.06/0.02, dsn=4.3.0, status=deferred (host ks3374456.kimsufi.com[private/dovecot-lmtp] said: 451 4.3.0 <webmaster(a)silviosiefke.com> Temporary internal error (in reply to end of DATA command)) Feb 3 18:06:09 ks3374456 postfix/lmtp[8385]: 7F6A12452C5: to=<webmaster(a)silviosiefke.de>, relay=ks3374456.kimsufi.com[private/dovecot-lmtp], delay=408, delays=408/0.02/0.05/0.02, dsn=4.3.0, status=deferred (host ks3374456.kimsufi.com[private/dovecot-lmtp] said: 451 4.3.0 <webmaster(a)silviosiefke.de> Temporary internal error (in reply to end of DATA command)) Feb 3 18:06:23 ks3374456 postfix/smtpd[8393]: connect from mail156.grifadder.com[85.187.97.156] Feb 3 18:06:23 ks3374456 postfix/smtpd[8393]: NOQUEUE: reject: RCPT from mail156.grifadder.com[85.187.97.156]: 450 4.1.1 <info(a)silviosiefke.de>: Recipient address rejected: unverified address: host ks3374456.kimsufi.com[private/dovecot-lmtp] said: 550 5.1.1 <info(a)silviosiefke.de> User doesn't exist: info(a)silviosiefke.de (in reply to RCPT TO command); from=<bounce-2696-15045860-2900-248(a)hausgif.com> to=<info(a)silviosiefke.de> proto=ESMTP helo=<mail156.grifadder.com> Feb 3 18:06:23 ks3374456 postfix/smtpd[8393]: disconnect from mail156.grifadder.com[85.187.97.156] # dovecot -n # 2.2.9: /etc/dovecot/dovecot.conf # OS: Linux 3.10.23-xxxx-std-ipv6-64 x86_64 Gentoo Base System release 2.2 debug_log_path = /var/log/dovecot-debug.log info_log_path = /var/log/dovecot-info.log log_path = /var/log/dovecot.log mail_debug = yes mail_location = maildir:~/maildir mail_plugins = acl managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { hidden = no inbox = yes location = prefix = separator = / type = private } namespace { list = yes location = maildir:/var/vmail/public:LAYOUT=fs:INDEX=~/public prefix = Public/ separator = / subscriptions = no type = public } namespace inbox { location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = } passdb { args = username_format=%u /var/vmail/auth.d/%d/passwd driver = passwd-file } plugin { acl = vfile:/var/vmail/conf.d/%d/acls:cache_secs=300 sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_global_dir = /var/vmail/conf.d/%d/sieve } protocols = imap lmtp service auth-worker { user = dovecot } service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } user = dovecot } service imap-login { inet_listener imap { address = 37.187.103.194 port = 143 } inet_listener imaps { port = 0 } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0666 user = postfix } } ssl_cert = </etc/ssl/dovecot/server.pem ssl_key = </etc/ssl/dovecot/server.key userdb { args = username_format=%u /var/vmail/auth.d/%d/passwd driver = passwd-file } verbose_proctitle = yes protocol lmtp { mail_plugins = acl sieve postmaster_address = webmaster(a)silviosiefke.com } protocol lda { mail_plugins = sieve } protocol imap { mail_plugins = acl imap_acl mail_log notify Thank you for help & Nice Day Silvio

3 3

Re: [Dovecot] mail_log_events, but who exactly triggered events? [feature request]
by Arkadiusz Miśkiewicz 04 Feb '14

04 Feb '14

On Tuesday 04 of February 2014, Steffen Kaiser wrote: > On Tue, 4 Feb 2014, Arkadiusz Miśkiewicz wrote: > > Date: Tue, 4 Feb 2014 13:09:15 +0100 > > From: Arkadiusz Miśkiewicz <arekm(a)maven.pl> > > To: dovecot(a)dovecot.org > > Subject: Re: [Dovecot] mail_log_events, > > > > but who exactly triggered events? [feature request] > > > > On Thursday 30 of January 2014, Steffen Kaiser wrote: > >> On Thu, 30 Jan 2014, Reindl Harald wrote: > >>> Am 30.01.2014 12:04, schrieb Arkadiusz Miśkiewicz: > >>>> On Thursday 30 of January 2014, Reindl Harald wrote: > >>>>> Am 30.01.2014 10:50, schrieb Arkadiusz Miśkiewicz: > >>>>>> mail_log_events is nice addition but how to log who exactly > >>>>>> triggered particular event? For example 5 users from 5 IP addresses > >>>>>> uses single imap user/mailbox. > >>>>>> > >>>>>> One of them deletes email and I'm logging delete related events. The > >>>>>> only logged thing is: > >>>>>> > >>>>>> dovecot: imap(user): delete: box=INBOX, uid=673287, > >>>>>> msgid=<some@thing>, size=1230 > > > > Here is a feature request: > > > > Add optionally (or unconditionally) logging of session id in > > mail_log_events. > > > > Timo, is this possible? > > > > (the same session id that appears in login log entries: dovecot: > > imap-login: Login: user=<someone2>, method=PLAIN, rip=aaa, lip=yyy, > > mpid=11682, TLS, session=<U1lD9y3xoQBPuvZx>) > > > > So for example this would get logged: > > dovecot: imap(user): delete: box=INBOX, uid=673287, msgid=<some@thing>, > > size=1230, session=<U1lD9y3xoQBPuvZx> > > did you've tried this: > http://wiki2.dovecot.org/Variables > there is the session variable and the mail_log_prefix setting. Should > work, IMHO. Wow, easy. Works nicely. Thanks! -- Arkadiusz Miśkiewicz, arekm / maven.pl

1 0

[Dovecot] Duplicate namespace prefix: ""
by Silvio Siefke 04 Feb '14

04 Feb '14

Hello, i try to run the mail system which explain dovecot in the wiki. http://wiki2.dovecot.org/HowTo/VirtualUserFlatFilesPostfix I have that complete write in the config, only the domain and user settings i changed. But something is wrong but i not found where is the mistake. <dovecot.log> Feb 03 16:12:52 lmtp(1079, webmaster(a)silviosiefke.de) Error: user webmaster(a)silviosiefke.de: Initialization failed: namespace configuration error: Duplicate namespace prefix: "" <mail.log> Feb 3 16:16:14 ks3374456 postfix/qmgr[1067]: 311A324525D: from=<double-bounce(a)ks3374456.kimsufi.com>, size=254, nrcpt=1 (queue active) Feb 3 16:16:14 ks3374456 postfix/lmtp[1308]: 311A324525D: to=<info(a)silviosiefke.de>, relay=ks3374456.kimsufi.com[private/dovecot-lmtp], delay=0.09, delays=0.04/0.01/0/0.04, dsn=5.1.1, status=undeliverable (host ks3374456.kimsufi.com[private/dovecot-lmtp] said: 550 5.1.1 <info(a)silviosiefke.de> User doesn't exist: info(a)silviosiefke.de (in reply to RCPT TO command)) Feb 3 16:16:14 ks3374456 postfix/qmgr[1067]: 311A324525D: removed Has someone an idea what can be wrong. Thank you for help & Nice Day Silvio

2 2

[Dovecot] mail_log_events, but who exactly triggered events?
by Arkadiusz Miśkiewicz 04 Feb '14

04 Feb '14

Hi. mail_log_events is nice addition but how to log who exactly triggered particular event? For example 5 users from 5 IP addresses uses single imap user/mailbox. One of them deletes email and I'm logging delete related events. The only logged thing is: dovecot: imap(user): delete: box=INBOX, uid=673287, msgid=<some@thing>, size=1230 which tells me nothing about who triggered it actually (note all 5 users were logged in at deletion time) How to solve this problem? Thanks, -- Arkadiusz Miśkiewicz, arekm / maven.pl

3 6

[Dovecot] Dovecot 2.2.10 shared mailbox
by Florin Portase 04 Feb '14

04 Feb '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 During some errors with domain dovecot.org, I didn't receive any answer. So here is output of dovecot -n first_valid_uid = 420 info_log_path = /var/log/dovecot/dovecot.log lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes log_path = /var/log/dovecot/errors.log mail_plugins = " zlib expire acl" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { inbox = no list = children location = maildir:/home/vpopmail/Public/Maildir prefix = Shared. separator = . subscriptions = yes type = shared } namespace { hidden = no inbox = yes list = yes location = mailbox Junk { auto = create special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Spam { auto = subscribe special_use = \Junk } mailbox Trash { auto = subscribe special_use = \Trash } prefix = INBOX. separator = . subscriptions = yes type = private } passdb { driver = vpopmail } plugin { acl = vfile expire = INBOX.Trash expire2 = INBOX.Spam expire3 = INBOX.Junk quota = maildir quota_rule2 = INBOX.Trash:ignore quota_rule3 = INBOX.Sent:ignore sieve = ~/Maildir/sieve/dovecot.sieve sieve_after = ~/Maildir/sieve/01_vacation.sieve sieve_before = /etc/dovecot/sieve/global.sieve sieve_dir = ~/Maildir/sieve sieve_global_dir = /etc/dovecot/sieve/ sieve_quota_max_scripts = 50 zlib_save = bz2 } protocols = imap sieve pop3 service anvil { chroot = empty client_limit = 0 drop_priv_before_exec = no executable = anvil extra_groups = group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 1 protocol = service_count = 0 type = anvil unix_listener anvil-auth-penalty { group = mode = 0600 user = } unix_listener anvil { group = mode = 0600 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service auth-worker { chroot = client_limit = 1 drop_priv_before_exec = no executable = auth -w extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 1 type = unix_listener auth-worker { group = mode = 0600 user = $default_internal_user } user = vsz_limit = 18446744073709551615 B } service auth { chroot = client_limit = 4096 drop_priv_before_exec = no executable = auth extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener /var/run/auth-master { group = vchkpw mode = 0660 user = vpopmail } unix_listener /var/run/private/auth { group = mode = 0666 user = } unix_listener auth-client { group = mode = 0600 user = } unix_listener auth-login { group = mode = 0600 user = $default_internal_user } unix_listener auth-master { group = mode = 0600 user = } unix_listener auth-userdb { group = mode = 0600 user = } unix_listener login/login { group = mode = 0666 user = } user = dovecot vsz_limit = 8 G } service config { chroot = client_limit = 0 drop_priv_before_exec = no executable = config extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = config unix_listener config { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service dict { chroot = client_limit = 1 drop_priv_before_exec = no executable = dict extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dict { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service director { chroot = client_limit = 0 drop_priv_before_exec = no executable = director extra_groups = fifo_listener login/proxy-notify { group = mode = 00 user = } group = idle_kill = 4294967295 secs privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = unix_listener director-admin { group = mode = 0600 user = } unix_listener login/director { group = mode = 00 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service dns_client { chroot = client_limit = 1 drop_priv_before_exec = no executable = dns-client extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = unix_listener dns-client { group = mode = 0666 user = } unix_listener login/dns-client { group = mode = 0666 user = } user = $default_internal_user vsz_limit = 18446744073709551615 B } service doveadm { chroot = client_limit = 1 drop_priv_before_exec = no executable = doveadm-server extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 1 type = unix_listener doveadm-server { group = mode = 0600 user = } user = vsz_limit = 18446744073709551615 B } service imap-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = imap-login extra_groups = group = idle_kill = 0 inet_listener imap { address = 0.0.0.0 port = 143 ssl = no } inet_listener imaps { address = 0.0.0.0 port = 993 ssl = yes } privileged_group = process_limit = 128 process_min_avail = 3 protocol = imap service_count = 1 type = login user = dovecot vsz_limit = 64 M } service imap { chroot = client_limit = 1 drop_priv_before_exec = no executable = imap extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1024 process_min_avail = 0 protocol = imap service_count = 50 type = unix_listener login/imap { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service lmtp { chroot = client_limit = 0 drop_priv_before_exec = no executable = lmtp extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = lmtp service_count = 0 type = unix_listener lmtp { group = mode = 0666 user = } user = vsz_limit = 0 } service log { chroot = client_limit = 0 drop_priv_before_exec = no executable = log extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1 process_min_avail = 0 protocol = service_count = 0 type = log user = vsz_limit = 18446744073709551615 B } service managesieve-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = managesieve-login extra_groups = group = idle_kill = 0 inet_listener sieve { address = port = 4190 ssl = no } privileged_group = process_limit = 128 process_min_avail = 3 protocol = sieve service_count = 1 type = login user = dovecot vsz_limit = 64 M } service managesieve { chroot = client_limit = 1 drop_priv_before_exec = no executable = managesieve extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = sieve service_count = 1 type = unix_listener login/sieve { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service pop3-login { chroot = login client_limit = 0 drop_priv_before_exec = no executable = pop3-login extra_groups = group = idle_kill = 0 inet_listener pop3 { address = 0.0.0.0 port = 110 ssl = no } inet_listener pop3s { address = 0.0.0.0 port = 995 ssl = yes } privileged_group = process_limit = 128 process_min_avail = 3 protocol = pop3 service_count = 1 type = login user = dovecot vsz_limit = 64 M } service pop3 { chroot = client_limit = 1 drop_priv_before_exec = no executable = pop3 extra_groups = group = idle_kill = 0 privileged_group = process_limit = 1024 process_min_avail = 0 protocol = pop3 service_count = 50 type = unix_listener login/pop3 { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } service ssl-params { chroot = client_limit = 0 drop_priv_before_exec = no executable = ssl-params extra_groups = group = idle_kill = 0 privileged_group = process_limit = 0 process_min_avail = 0 protocol = service_count = 0 type = startup unix_listener login/ssl-params { group = mode = 0666 user = } user = vsz_limit = 18446744073709551615 B } ssl_cert = </var/qmail/control/servercert.pem ssl_cipher_list = ALL:!LOW:!SSLv2 ssl_key = </var/qmail/control/servercert.pem userdb { args = quota_template=quota_rule=*:backend=%q driver = vpopmail } verbose_proctitle = yes verbose_ssl = yes protocol imap { imap_max_line_length = 64 k mail_plugins = quota imap_quota zlib imap_zlib acl imap_acl expire } protocol pop3 { mail_plugins = quota pop3_no_flag_updates = no pop3_uidl_format = %v-%u } protocol sieve { managesieve_logout_format = bytes ( in=%i : out=%o ) } protocol lda { auth_socket_path = /var/run/auth-master info_log_path = /var/log/dovecot-lda/lda.log log_path = /var/log/dovecot-lda/lda-errors.log mail_fsync = optimized mail_plugins = sieve quota autocreate expire postmaster_address = angryninja(a)medianetork.ro sendmail_path = /var/qmail/bin/sendmail } protocol lmtp { mail_fsync = optimized } type of error: COREDUMP Feb 04 11:49:59 imap(portase.florin(a)medianetork.ro): Fatal: master: service(imap): child 23391 killed with signal 11 (core dumped) Disabling of shared mailbox results in correct functioning of dovecot. To mention again: dovecot version previous to 2.2 was working OK. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQEcBAEBAgAGBQJS8McEAAoJECEzxtLP+204yTIIAI9wH1KKwImdBRipKX12ibfT q+WPazWE5gTRNTf+BG4yaxE+UKtm6KchJovTGdALdfShU24pELl0NEAt3j5OHIsA 5OP3nMddhySzN8DicWarp3eKfYb4itBuHvHaJAtLH9wtgWtqDjYw2q3sy+qNw+zN 6p8KFnNVKi53dgUkog+wb4cOSVjVnmIzSpU7PNNRU+dMaKpbARiWBPXP5sp/B9px RZCmvDedJhHb083KQDqNtR/mlTOhciC8oU/9Nn5WZmaTJAe4gusiRISAWhmH9fnJ IUV6DeEGZ8fbmHdXOQ2U72gPiXyxtFjTc8kURWhbhuzgeKLsSGennV/wLv0U7lw= =tDEn -----END PGP SIGNATURE-----

1 0

[Dovecot] zlib unexpected EOF
by Anand Kumria 04 Feb '14

04 Feb '14

Hi, I am seeing occasional log entries like: Feb 4 06:20:01 mail1 dovecot: imap(user(a)example.com): Error: read(<imap client>) failed: zlib.read(<imap client>): unexpected EOF at 894774 Feb 4 06:20:01 mail1 dovecot: imap(user(a)example.com): Disconnected in APPEND (1 msgs, 201 secs, 0/5180550 bytes) in=894774 out=643701 I've been able to correlate this to users - using Thunderbird - complaining that they have been unable to "send email". Is the problem on the Dovecot side, their side or something else? If on the Dovecot any pointers and what I should look at? Thanks, Anand

2 1

[Dovecot] Dovecot2 + Quota
by drum.lucas＠gmail.com 04 Feb '14

04 Feb '14

Hello! I need to configure Quota on Roundcubemail with Dovecot2. So, I did: 90-quota.conf: # SQL backend: quota = dict:User quota::proxy::sqlquota quota_rule = *:storage=20M:messages=1000 } dict { sqlquota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext } OK, works! but, My webmail shows me 20M of quota. But on my Postfixadmin I configured 200M. How can I fix this? Att; *Lucas Possamai* http://about.me/lucaspossamai https://www.digitalocean.com/?refcode=25021cb7dbdf

4 5

[Dovecot] Dovecot auth user lookup patch for maildrop 2.7.1
by Osamu Aoki 03 Feb '14

03 Feb '14

Hi, I just updated patch for maildrop to 2.7.1 which moved many directories to libs/. http://anonscm.debian.org/gitweb/?p=collab-maint/maildrop.git;a=blob;f=debi… Osamu

1 0

[Dovecot] Dovecot 2.2.10 shared mailbox
by Florin Portase 03 Feb '14

03 Feb '14

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hello all, I've just upgraded my dovecot from version 2.1.7 to 2.2.10 and since then I encounter errors when I'm enabling SHARED MAILBOX: here is part of dovecot.conf: .................... mail_plugins = $mail_plugins zlib expire acl namespace { type = shared prefix = Shared. separator = . list = children location = maildir:/home/vpopmail/Public/Maildir subscriptions = yes } namespace { hidden = no inbox = yes list = yes location = prefix = INBOX. separator = . subscriptions = yes type = private mailbox Trash { auto = subscribe special_use = \Trash } ................ protocol imap { imap_max_line_length = 64 k #mail_plugins = quota imap_quota autocreate zlib imap_zlib acl imap_acl expire mail_plugins = quota imap_quota zlib imap_zlib acl imap_acl expire } ................... plugin { quota = maildir quota_rule2 = INBOX.Trash:ignore quota_rule3 = INBOX.Sent:ignore ##autocreate = INBOX.Spam ##autosubscribe = INBOX.Spam expire = INBOX.Trash expire2 = INBOX.Spam expire3 = INBOX.Junk zlib_save = bz2 acl = vfile } To mention: on version 2.1.xx the shared mail box was working flawless. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Thunderbird - http://www.enigmail.net/ iQEcBAEBAgAGBQJS68NDAAoJECEzxtLP+204uKIIAKFjl28qHPJvrR9ipO3NMAAx fRMiZ8I9cVaJpqYmOKnBgChPzexE3Mh3lStP+jfX12OaJ8Fgk9r0yPXwAILpY2Ef 7Uirpj0iL5pIwGhTURzt+sgbxu24YdJMRrHr5OtL0H+e1rP27injAaZYPhr4A2bk QbbhQic62S+5KNvYC/O4154fwlcgBDRkfSvlg8scq4h5faDrOR30Gjouf4PV6ZBe jwp3rGGyNOc52LyQKqBxA/JyiOXjEvamldIe0Ubjm9bh2EOmOkCdhC/OWpBRT+I0 A36syB+ouO4GXqDGWeMD8i8HD0o4eVfU11cJCDAB2tMrdSP8b2PTBWMHI65aud4= =+XmP -----END PGP SIGNATURE-----

2 1

[Dovecot] lmtp_save_to_detail_mailbox per address?
by Andrew Ray 03 Feb '14

03 Feb '14

Is there any way to control/disable this for certain mailboxes? For one account (that handles bounces) I need it disabled, for all the other (normal) accounts its great. -- Andrew Ray

3 2

[Dovecot] Assertion failed with imapc after upgrading Dovecot from 2.1.7 to 2.2.9
by Sylvain 29 Jan '14

29 Jan '14

Hi ! I have an old Courier IMAP and in front of it, I have put a proxy cache with Dovecot/imapc. I use Debian Wheezy (stable) which package Dovecot in version 2.1.7. I have tested the upgrade to Debian Jessie (testing) which package Dovecot in version 2.2.9 but an assertion is thrown : dovecot: imap(xxx): Panic: file imapc-list.c: line 499 (imapc_list_delete_unused_indexes): assertion failed: (strncmp(vname, fs_list->ns->prefix, fs_list->ns->prefix_len) == 0) I have checked source code and have seen that if *imapc_list_prefix* is not set, assertion will not be "walked". It's works but special inbox aren't detected correctly in email clients. If I understand the meaning of *vname* variable, it is because our Courier IMAP send us "INBOX" which is the value of my *imapc_list_prefix* and thus, assertion is thrown. Here some details of my tests : Courier IMAP : * OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNION STARTTLS] Courier-IMAP ready. Copyright 1998-2005 Double Precision, Inc. See COPYING for distribution information. a login xxx xxx a OK LOGIN Ok. a list "" "*" * LIST (\HasNoChildren) "." "INBOX.Drafts" * LIST (\HasNoChildren) "." "INBOX.Trash" * LIST (\HasNoChildren) "." "INBOX.test" * LIST (\HasNoChildren) "." "INBOX.Sent" * LIST (\HasNoChildren) "." "INBOX.Junk" * LIST (\Unmarked \HasChildren) "." "INBOX" a OK LIST completed Dovecot version 2.1.7 : * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN AUTH=LOGIN] Dovecot ready. a login xxx xxx a OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE] Logged in a list "" "*" * LIST (\HasChildren) "." "INBOX" * LIST (\HasNoChildren \Drafts) "." "INBOX.Drafts" * LIST (\HasNoChildren \Trash) "." "INBOX.Trash" * LIST (\HasNoChildren) "." "INBOX.test" * LIST (\HasNoChildren \Sent) "." "INBOX.Sent" * LIST (\HasNoChildren \Junk) "." "INBOX.Junk" a OK List completed. Dovecot version 2.2.9 : * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE STARTTLS AUTH=PLAIN AUTH=LOGIN] Dovecot ready. a login xxx xxx a OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS THREAD=ORDEREDSUBJECT MULTIAPPEND URL-PARTIAL CATENATE UNSELECT CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS SPECIAL-USE BINARY MOVE] Logged in a list "" "*" Connection closed by foreign host. And the dovecot configuration relative to the inbox : imapc_list_prefix = INBOX namespace inbox { inbox = yes separator = . prefix = INBOX. } Any help will be welcome :) Sylvain

1 1

[Dovecot] Shared mailbox ACL
by Alex Ferrara 29 Jan '14

29 Jan '14

Hi everyone, I am having some trouble with shared folders in trying to replicate how we use them with a Cyrus backend. The auth database is Samba4 active directory, so I am using an LDAP lookup to authenticate and forcing the UID and GID to be all the same. I have a post-login script that sets the group ACL, and this seems to be working fine. /mnt/mail is an NFS mount to a FreeNAS machine, and there is only one Dovecot server connecting to that NFS share. I have been able to get the inbox of the shared mailbox to appear in Thunderbird, but I would like to allow all subfolders to have the same ACLs. Is there a way to do this without having an ACL entry for each folder in the dovecot-acl file? I also cannot seem to create folders under the shared inbox. Thanks. Below is the output of /mnt/mail/acl/shared-mailboxes shared/shared-boxes/group/accounting/accounting 1 shared/shared-boxes/group/team1/team1 1 shared/shared-boxes/group/team2/team2 1 Below is the output of dovecot -n # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 2.6.32-22-pve x86_64 Debian 7.3 nfs auth_mechanisms = plain login auth_username_format = %n mail_debug = yes mail_location = maildir:/mnt/mail/mailboxes/%n/Maildir:INDEX=/var/local/dovecot-indexes/%n mail_plugins = acl mail_shared_explicit_inbox = no managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { list = yes location = maildir:/mnt/mail/mailboxes/%%n/Maildir:INDEX=/var/local/dovecot-shared/%%n prefix = ZGroup/%%n/ separator = / subscriptions = no type = shared } namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / type = private } passdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } plugin { acl = vfile acl_defaults_from_inbox = yes acl_shared_dict = file:/mnt/mail/acl/shared-mailboxes sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = " imap lmtp sieve" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service imap-postlogin { executable = script-login /usr/local/bin/postlogin.py user = vmail } service imap { executable = imap imap-postlogin } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } user = vmail } ssl_cert = </etc/dovecot/dovecot.pem ssl_key = </etc/dovecot/private/dovecot.pem userdb { args = /etc/dovecot/dovecot-ldap.conf.ext driver = ldap } protocol lmtp { mail_plugins = quota sieve } protocol lda { mail_plugins = quota sieve } protocol imap { mail_plugins = acl imap_acl }

2 4

Re: [Dovecot] Architecture for large Dovecot cluster
by Joseph Tam 29 Jan '14

29 Jan '14

>> Just a guess, but I expect the difference is because NetApp de-dupes >> by checksumming blocks and mark whole blocks as duplicates if they >> have the same checksum. > > True, the start of the message is always at byte 0, but because of > different header length per user for the same message (different mail > address with different lengths) the body will never start at the same > byte. Oh yes, that's right. I confused maildir format with sendmail queue files that separates header and body. There is still some similarlity for mass mailouts to the same mail domain: they will have almost identical headers +/- message IDs and a few bytes here and there, but as you say, SiS is the way to go for deduping bulky message attachments. Joseph Tam <jtam.home(a)gmail.com>

1 0

[Dovecot] recipient_delimiter -- feature request
by Andrew Ray 29 Jan '14

29 Jan '14

Hi, It would be nice if the recipient_delimiter configuration option supported multiple recipient delimiters as Postfix now does. e.g. now if I set: recipient_delimiter = +- in Postfix, then test-extension(a)sample.com and test+extension(a)sample.com are both recognized. But if I set: recipient_delimiter = +- in Dovecot, neither of the above are recognized and instead test+-extension(a)sample.com is valid. Well, presently this feature isn't that important to me, but I imagine it could be a source of confusion for people who are migrating from say qmail to postfix (as I am doing) and notice Postfix's cool ability to support both types of delimiters and assume Dovecot will as well (as I did). Thanks, Andrew Ray -- Andrew Ray +1 404-418-5443 +421 (0) 917 832 253 http://guns.freedomlives.net/

2 2

[Dovecot] post-login scripting failing with "denied access to user" v2.1.7
by Frank 29 Jan '14

29 Jan '14

I am trying to have a default sieve rule for new mailboxes that can be edited by users using the round cube sieve plugin. It would actually be better executed when a new user is created but my postfixadmin runs on a separate machine so that's a bit tricky. The "sieve-default =" setting won't quite achieve what I want as I want users to be able to edit the default rule (to adjust SPAM level) Mail works fine before I add my post-login script to 10-master.conf ---------------------- service imap { # tell imap to do post-login lookup using a socket called "imap-postlogin" executable = imap imap-postlogin } service imap-postlogin { # all post-login scripts are executed via script-login binary executable = script-login /etc/dovecot/custom_sieve/postlogin.sh # the script process runs as the user specified here (v2.0.14+): user = mail # also tried $default_internal_user and root # this UNIX socket listener must use the same name as given to imap executable unix_listener imap-postlogin { } } After adding this setting, login fails and gives the error below. It certainly looks like a permission issue, but I have checked my script is executable and owned by vmail:vmail. The bash script executes fine as the mail user. The other possibility is that dovecot is denying access to the $HOME variable, but that seems unlikely. Nevertheless, I am stuck! Log shows: ------------------ dovecot: master: Dovecot v2.1.7 starting up (core dumps disabled) dovecot: auth-worker(17522): mysql(database1): Connected to database postfixadmin dovecot: imap-login: Login: user=<test2(a)fqdn.net>, method=PLAIN, rip=10.0.3.120, lip=10.0.1.180, mpid=17524, TLS, session=<+blqxxxxxxxxxM> dovecot: imap(test2(a)fqdn.net): Post-login script denied access to user test2(a)fqdn.net BASH script: /etc/dovecot/custom_sieve/postlogin.sh -------------------------------------------------- #!/bin/sh if [ ! -f $HOME/dovecot.sieve ] # if file doesn't exist then mkdir -p $HOME/sieve cp /etc/dovecot/custom_sieve/default.sieve $HOME/sieve/managesieve.sieve ln -s $HOME/sieve/managesieve.sieve $HOME/dovecot.sieve fi DEFAULT SIEVE RULE: /etc/dovecot/custom_sieve/default.sieve ----------------------------------- require ["fileinto"]; # rule:[SPAM] if header :contains "X-Spam-Level" "**********" { fileinto "Junk"; } Config ======= # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-4-amd64 x86_64 Debian 7.3 ext4 dict { sqldomainquota = mysql:/etc/dovecot/dovecot-sql-domain.conf sqluserquota = mysql:/etc/dovecot/dovecot-dict-sql-user.conf } mail_location = maildir:/home/vmail/%d/%n/Maildir:INDEX=/home/vmail/%d/%n/Maildir/indexes mail_plugins = " quota" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Junk { auto = subscribe special_use = \Junk } mailbox Sent { auto = subscribe special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { auto = subscribe special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { quota = dict:User Quota::proxy::sqluserquota quota_rule2 = Trash:storage=+100M sieve = ~/../.dovecot.sieve sieve_dir = ~/../sieve } protocols = " imap sieve pop3" service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } } service dict { unix_listener dict { group = vmail mode = 0600 user = vmail } } service imap-postlogin { executable = script-login /var/spool/mail/postlogin.sh user = vmail } service imap { executable = imap imap-postlogin } ssl_cert = </etc/ssl/mailserver/mailserver.pem ssl_key = </etc/ssl/mailserver/private/mailserver_dcp.pem userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lda { mail_plugins = " quota sieve" postmaster_address = hidden(a)fqdn.net } protocol imap { mail_plugins = " quota imap_quota" }

2 2

Re: [Dovecot] Architecture for large Dovecot cluster
by Joseph Tam 28 Jan '14

28 Jan '14

Sven Hartge <sven(a)svenhartge.de> wrote: > Interesting datapoint: NetApp Deduplication did only recover about 1% of > storage space with mdbox-based mail storage, while on an maildir-based > mail storage, the rate was about 15%. (This was tested with a copy of > real user data, so is accurate for my workload.) Just a guess, but I expect the difference is because NetApp de-dupes by checksumming blocks and mark whole blocks as duplicates if they have the same checksum. The message body has the same block offset in maildir (i.e. the start of a message is at byte 0), whereas mdbox might align message body anywhere in a block, so you might have 512 different block configurations for the same message. I don't know whether message alignment would be a worthwhile optimization for mdbox. Joseph Tam <jtam.home(a)gmail.com>

2 1