- dovecot - dovecot.org

Empty oldstats
by DeJa Wu 15 Jun '23

15 Jun '23

I'm facing a problem to get integration dovecot and Netdata agent to monitor current status of dovecot sessions. First of all I've been set up a socket for reading data with Netdata agent: service old-stats { unix_listener old-stats { group = netdata user = vmail mode = 0660 } } Then in netdata agent UI i've found that all stats collected from this source are zeroed. Hm, maybe I did something wrong, and I goes to check classic command, what Netdata agent uses in Dovecot socket: # doveadm oldstats dump global reset_timestamp last_update num_logins num_cmds num_connected_sessions user_cpu sys_cpu clock_time min_faults maj_faults vol_cs invol_cs disk_input disk_output read_count read_bytes write_count write_bytes mail_lookup_path mail_lookup_attr mail_read_count mail_read_bytes mail_cache_hits auth_successes auth_master_successes auth_failures auth_db_tempfails auth_cache_hits auth_cache_misses 1686759269 0.000000 0 0 0 0.0 0.0 0.0 0 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 Yep, all stats not counted. How to count stats in my setup? Oldstat plugin is enabled. mail_plugins = quota acl old_stats plugin { old_stats_refresh = 10 secs old_stats_track_cmds = yes } # dovecot --version 2.3.19.1 (9b53102964)

1 0

Panic: file acl-backend-vfile.c: line 123 on access from Nextcloud Imap-Client
by forum＠xp8.de 15 Jun '23

15 Jun '23

Hello, with activated imap_aci i get the following error: Jun 15 08:40:02 konsrvdata2 dovecot: imap(xp8it)<439797><iKSIViX+vKoKXggM>: Panic: file acl-backend-vfile.c: line 123 (acl_backend_vfile_get_local_dir): assertion failed: (list == ns->list) Jun 15 08:40:02 konsrvdata2 dovecot: imap(xp8it)<439797><iKSIViX+vKoKXggM>: Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(backtrace_append+0x46) [0x7f4d46caede6] -> /usr/lib/dovecot/libdovecot.so.0(backtrace_get+0x22) [0x7f4d46caef02] -> /usr/lib/dovecot/libdovecot.so.0(+0x109cdb) [0x7f4d46cbbcdb] -> /usr/lib/dovecot/libdovecot.so.0(+0x109d77) [0x7f4d46cbbd77] -> /usr/lib/dovecot/libdovecot.so.0(+0x5cf73) [0x7f4d46c0ef73] -> /usr/lib/dovecot/modules/lib01_acl_plugin.so(+0x7fbf) [0x7f4d4696dfbf] -> /usr/lib/dovecot/modules/lib01_acl_plugin.so(+0xb795) [0x7f4d46971795] -> /usr/lib/dovecot/modules/lib01_acl_plugin.so(acl_backend_get_default_object+0x69) [0x7f4d46971499] -> /usr/lib/dovecot/modules/lib01_acl_plugin.so(acl_backend_get_default_rights+0x13) [0x7f4d469714c3] -> /usr/lib/dovecot/modules/lib01_acl_plugin.so(+0x8e53) [0x7f4d4696ee53] -> /usr/lib/dovecot/modules/lib02_imap_acl_plugin.so(+0x3975) [0x7f4d46960975] -> dovecot/imap(command_exec+0xa4) [0x55d9dc7f6364] -> dovecot/imap(+0x22312) [0x55d9dc7f4312] -> dovecot/imap(+0x223c4) [0x55d9dc7f43c4] -> dovecot/imap(client_handle_input+0x1bd) [0x55d9dc7f47cd] -> dovecot/imap(client_input+0x74) [0x55d9dc7f4d94] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x6d) [0x7f4d46cd1f8d] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0x13a) [0x7f4d46cd368a] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x54) [0x7f4d46cd2034] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x40) [0x7f4d46cd21f0] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x17) [0x7f4d46c446c7] -> dovecot/imap(main+0x4ea) [0x55d9dc7e5d0a] -> /lib/x86_64-linux-gnu/libc.so.6(+0x29d90) [0x7f4d469add90] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x80) [0x7f4d469ade40] -> dovecot/imap(_start+0x25) [0x55d9dc7e5da5] Jun 15 08:40:02 konsrvdata2 dovecot: imap(xp8it)<439797><iKSIViX+vKoKXggM>: Fatal: master: service(imap): child 439797 killed with signal 6 (core dumped) Bug? Any Ideas? Greets! root@konsrvdata2:/etc/dovecot/conf.d# dovecot --version 2.3.16 (7e2e900c1a) root@konsrvdata2:/etc/dovecot/conf.d# doveconf -n # 2.3.16 (7e2e900c1a): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.16 (09c29328) # OS: Linux 5.15.0-67-generic x86_64 Ubuntu 22.04.2 LTS ext4 # Hostname: konsrvdata2 auth_mechanisms = plain cram-md5 auth_username_format = %Ln disable_plaintext_auth = no mail_home = /srv/dovecot/home/%d/%n/ mail_location = maildir:/srv/dovecot/mail/%d/%n/ mail_plugins = acl mail_privileged_group = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext namespace { list = yes location = maildir:/srv/dovecot/mail/waldkindergarten-ts:INDEXPVT=/srv/dovecot/mail/xp8it/shared/waldkindergarten-ts prefix = shared/%%u/ separator = / type = shared } namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / } passdb { args = scheme=CRYPT username_format=%u /etc/dovecot/users driver = passwd-file } plugin { acl = vfile acl_defaults_from_inbox = yes acl_shared_dict = file:/srv/dovecot/db/shared-mailboxes.db sieve = file:~/sieve;active=~/.dovecot.sieve } protocols = " imap lmtp sieve sieve" service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0600 user = postfix } } service managesieve-login { inet_listener sieve { port = 4190 } } ssl_cert = </etc/dovecot/private/imap.konis.info.fullchain.pem ssl_client_ca_dir = /etc/ssl/certs ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it userdb { args = uid=vmail gid=vmail driver = static } protocol lmtp { mail_plugins = acl sieve } protocol lda { mail_plugins = acl sieve } protocol imap { mail_plugins = acl imap_acl }

1 0

Re: imap syncing issues
by dovecot＠x9p.org 14 Jun '23

14 Jun '23

Paul Kudla already suggested setting fetch intervals and to avoid microsoft clients. You can debug the issue with tcpdump like this: # tcpdump -X -s100 -nni lo0 port 143 (replace lo0 for lo, eth0 or the name of your interface) disable all clients, enable the one you want to debug/see the commands. me deleting a message and client issuing the command: 14:40:17.386079 127.0.0.1.48376 > 127.0.0.1.143: P 1410:1437(27) ack 177507 win 256 <nop,nop,timestamp 1610013520 2861364932> (DF) ......(REDACTED) 0030: aa8c f6c4 3131 3120 7569 6420 6d6f 7665 ....111 uid move 0040: 2034 3732 3920 2254 7261 7368 220d 0a 4729 "Trash".. 14:40:17.486259 127.0.0.1.143 > 127.0.0.1.48376: P 177507:177624(117) ack 1437 win 256 <nop,nop,timestamp 2861364932 1610013520> (DF) ......(REDACTED) 0030: 5ff6 db50 2a20 4f4b 205b 434f 5059 5549 _..P* OK [COPYUI 0040: 4420 3136 3830 3237 3234 3630 2034 3732 D 1680272460 472 0050: 3920 3132 365d 204d 6f76 6564 2055 4944 9 126] Moved UID Cheers, x9p On 6/14/23 17:19, Michael Grant wrote: > > Yes, I’m the sole person responsible for messing this up. My Linux > machine, my server, I installed it, I configured it, perhaps I caused > this.... > > It could be some misbehaving imap client that is causing this, that’s > one of the things I’m trying to understand. I don’t see any errors in > the mail log which is where dovecot logs to. All the clients are as > up to date as possible. > > One way forward that I know of is to remove all the imap clients and > start over, adding one by one seeing if it starts breaking again. I > was hoping first to see if I could figure out what’s gone wrong before > doing this. > > *From: *dovecot(a)x9p.org > *Sent: *14 June 2023 18:05 > *To: *Michael Grant <mailto:mgrant@grant.org>; dovecot(a)dovecot.org > *Subject: *Re: imap syncing issues > > The issue seems to be with the clients (an update maybe?), not the server. > > do you have console/root access to dovecot and files? > > On 6/14/23 11:17, Michael Grant via dovecot wrote: > > I’m having synchronization issues in imap. I am accessing my mail > from several different imap clients: K9 on Android, Windows 11 and > 10 mail client, and Android Gmail app. Both desktop and laptop, > tablet, phone. I know I have more than the usual number of imap > connections... > > Often when I delete a message in one place, it doesn’t get deleted > in another. For example, if I delete a message on K9 then open my > laptop, it’s still there in W11 Mail. But just now, I deleted > some messages on my laptop and swiped down on K9 and the message > disappeared on K9. But K9 shows other messages which have been > deleted in Windows 11 Mail. I’ve not yet been able to figure out > a pattern. It’s annoying me. I have to delete messages in > several different places. Messages not coming back, they’re just > not being deleted in one place and that delete operation is not > syncing to the others. > > Messages seem to be being marked as read properly across devices. > This seems to be an issue with delete only, so far as I’ve noticed. > > I’ve long been using multiple imap clients, this syncing issue > started maybe 6 to 8 months ago. > > Is there a good way to get debugging info out of dovecot as to > what the clients are doing? > > Or does anyone have any advise which might help resolve this > without resorting to me digging into the imap protocol? > > Michael Grant > > > > _______________________________________________ > > dovecot mailing list --dovecot(a)dovecot.org > > To unsubscribe send an email todovecot-leave(a)dovecot.org >

1 0

imap syncing issues
by Michael Grant 14 Jun '23

14 Jun '23

I’m having synchronization issues in imap. I am accessing my mail from several different imap clients: K9 on Android, Windows 11 and 10 mail client, and Android Gmail app. Both desktop and laptop, tablet, phone. I know I have more than the usual number of imap connections... Often when I delete a message in one place, it doesn’t get deleted in another. For example, if I delete a message on K9 then open my laptop, it’s still there in W11 Mail. But just now, I deleted some messages on my laptop and swiped down on K9 and the message disappeared on K9. But K9 shows other messages which have been deleted in Windows 11 Mail. I’ve not yet been able to figure out a pattern. It’s annoying me. I have to delete messages in several different places. Messages not coming back, they’re just not being deleted in one place and that delete operation is not syncing to the others. Messages seem to be being marked as read properly across devices. This seems to be an issue with delete only, so far as I’ve noticed. I’ve long been using multiple imap clients, this syncing issue started maybe 6 to 8 months ago. Is there a good way to get debugging info out of dovecot as to what the clients are doing? Or does anyone have any advise which might help resolve this without resorting to me digging into the imap protocol? Michael Grant

3 2

Migration dovecot server with local users to dovecot with virtual mailboxes
by tseegerkrb＠gmail.com 12 Jun '23

12 Jun '23

Hello, we are using a dovecot server with NIS, we want to transfer it to a new setup. As backend a mysql server will be used in the future. My problem is, if I just copy the maildir or use "doveadm import" all mails are flagged as "unseen". How can i preserve the flags? This is how I have tried it so far. root@mail / $ doveadm import -s -u testuser(a)testdomain.local maildir:/tmp/testuser-maildir-230608/Maildir/:INDEX=MEMORY "" "All" As a "workaround" I tried to change the flags. root@mail / $ doveadm -v flags add -u testuser(a)testdomain.local "Seen" "ALL" This led partially to the desired success, the mails are shown as "seen", but the folders (e.g. Roundcube) still show unread mails. dovecot -n ############################################ # 2.3.13 (89f716dc2): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.13 (cdd19fe3) # OS: Linux 5.10.0-23-cloud-amd64 x86_64 Debian 11.7 # Hostname: mail.testdomain.local auth_mechanisms = plain login mail_fsync = always mail_gid = vmail mail_home = /var/vmail/mailboxes/%d/%n mail_location = maildir:~/mail:LAYOUT=fs:INDEX=MEMORY mail_privileged_group = vmail mail_uid = vmail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext imapsieve vnd.dovecot.imapsieve mmap_disable = yes namespace inbox { inbox = yes location = mailbox Drafts { auto = subscribe special_use = \Drafts } mailbox Sent { auto = subscribe special_use = \Sent } mailbox Spam { auto = subscribe special_use = \Junk } mailbox Trash { auto = subscribe special_use = \Trash } prefix = } passdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } plugin { imapsieve_mailbox1_before = file:/var/vmail/sieve/global/learn-spam.sieve imapsieve_mailbox1_causes = COPY imapsieve_mailbox1_name = Spam imapsieve_mailbox2_before = file:/var/vmail/sieve/global/learn-ham.sieve imapsieve_mailbox2_causes = COPY imapsieve_mailbox2_from = Spam imapsieve_mailbox2_name = * quota = maildir:User quota quota_exceeded_message = User %u has exhausted allowed storage space. sieve = file:/var/vmail/sieve/%d/%n/scripts;active=/var/vmail/sieve/%d/%n/active-script.sieve sieve_before = /var/vmail/sieve/global/spam-global.sieve sieve_global_extensions = +vnd.dovecot.pipe sieve_pipe_bin_dir = /usr/bin sieve_plugins = sieve_imapsieve sieve_extprograms } protocols = imap lmtp sieve service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0660 user = vmail } } service imap-login { inet_listener imap { port = 143 } process_min_avail = 1 service_count = 1 } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } user = vmail } service managesieve-login { inet_listener sieve { port = 4190 } } ssl = required ssl_ca = </etc/dovecot/private/ca-testdomain.local_tls_srv_crt.crt ssl_cert = </etc/dovecot/private/mail.testdomain.local_tls_srv_crt.crt ssl_cipher_list = ECDHE-ECDSA-AES128-GCM-SHA256:ECDHE-RSA-AES128-GCM-SHA256:ECDHE-ECDSA-AES256-GCM-SHA384:ECDHE-RSA-AES256-GCM-SHA384:ECDHE-ECDSA-CHACHA20-POLY1305:ECDHE-RSA-CHACHA20-POLY1305:DHE-RSA-AES128-GCM-SHA256:DHE-RSA-AES256-GCM-SHA384 ssl_dh = # hidden, use -P to show it ssl_key = # hidden, use -P to show it ssl_min_protocol = TLSv1.2 userdb { args = /etc/dovecot/dovecot-sql.conf driver = sql } protocol imap { imap_idle_notify_interval = 29 mins mail_max_userip_connections = 20 mail_plugins = " quota imap_quota imap_sieve" } protocol lmtp { mail_plugins = " sieve notify push_notification quota" postmaster_address = postmaster(a)testdomain.local } ############################################ Thanks for your help

5 6

dovecot with sieve vacation plugin
by spi 12 Jun '23

12 Jun '23

Hi all I have an issue understanding the sieve vacation plugin. I can get it trigger for particular emails or something, but I don't get the sender setting right. My setup: I've got an external email address a(a)aaa.com and a local b(a)bbb.local (which is used in virtual_mailbox_maps in postfix or for user authentication in dovecot). Emails for a(a)aaa.com get stored in the b(a)bbb.local mailbox. Postfix uses an external relay to transfer emails from a(a)aaa.com. Sending and receiving emails works as a charm. In received emails I see headers for Return-Path: <the original sender> Delivered-To: b(a)bbb.local Envelope-To: a(a)aaa.com X-Original-to: a(a)aaa.com In sieve I've got configured for the user b(a)bbb.local require "vacation"; if allof ( address :domain "From" "other-sender.com", currentdate :value "ge" "date" "2023-05-24" ) { vacation :from "a <a(a)aaa.com>" #:addresses ["a(a)aaa.com", "b(a)bbb.local"] :addresses ["a(a)aaa.com"] :subject "Out of office by EoL" "bla bla bla"; } The issue: When I receive an email from e. g. john(a)other-sender.com a vacation response gets created and sent. The From header ist set to the value configured by ":addresses ["a(a)aaa.com"]". But: a) If I set "sieve_vacation_send_from_recipient = yes" in dovecot.conf the sender header in the vaction response is filled in with b(a)bbb.local. b) If I set "sieve_vacation_send_from_recipient = no" in dovecot.conf the sender header in the vaction response stays blank (which I understand is the preferred way). Different settings for sieve_vacation_use_original_recipient don't seem to make any difference. In both cases a) and b) postfix tries todeliver the email directly to the receiving mail server and does not care for my sender relay host map (sender_dependent_relayhost_maps in postfix main.cf), well of course as there is no relay host for @bbb.local (case a)) and in case b) the sender is blank. In my understanding the vacation plugin uses the original recipient as sender for the out of office reply which in my case is in the X-Original-to header (I use lmtp and have also set "lda_original_recipient_header = X-Original-To"). But it does not - it sticks with the b(a)bbb.local mail address as sender. If I omitted the sender setting - how could I tell postfix to relay these ooo mails through the correct relay (like based on the From header domain in the vacation response)? What would the right approach be to set the sender right or get postfix to relay the vacation responses correctly? Any help would be appreciated! -- Cheers spi

2 8

Re: No-novice with Dovecot, but need novice-like advice (was Dovecot cracked?!)
by Jochen Bern 11 Jun '23

11 Jun '23

On 09.06.23 00:36, Richard Troy wrote: > OH, sure, I got it down to a trickle, but these few Russian sites > always managed to get their spam through and (FWIW, if you can characterize the offenders by country, trying a GeoIP filter as a stop-gap measure sounds rather promising.) > Give me a white-list of the > ONLY accounts that can relay; NOTHING ELSE can relay. ... THAT would do > it! But no! Neither in Postfix nor dovecot is there such a thing! I'm afraid that that's not *entirely* true ... : > /etc/postfix# grep senderauth main.cf > smtpd_sender_login_maps = hash:/etc/postfix/senderauth > /etc/postfix# head -2 senderauth ; grep bern senderauth | sed -e 's/[-a-z\.]*'"$DOMAIN/DOMAIN/g" > # Envelope Sender: Requires SMTP AUTH as one of: > # actual.address(a)dom.ain user.1(a)dom.ain, another(a)else.where > jochen.bern(a)DOMAIN.pawisda.de jochen.bern(a)DOMAIN.de (Also works with unspecified local part, i.e., "@some.dom.ain" for the left-hand side.) > Combine that with a greylist type function where the usual IP addresses > for particular users were let through, and new ones delayed, THAT would > be awesome, too! Please define "delayed". The kind where you tell the client to retry later and then close the connection is available for postfix under the name of postgrey, but is probably quite disruptive when used with an M*S*A port; same caveat for mechanisms that prevent the connection altogether, like one could build with iptables. The search keyword for the kind where "the server is just deeaaaaaaadddd slllooooowwwww" would be "Teergrube". [Yes, I'm German, so I capitalize German nouns like German does. :-> ] None of those are *built right into* postfix or dovecot, likely because it's too much complexity to maintain for a huge user base that doesn't use the functionality all too often. > And if someone tells me I'm wrong and points me at how to do these > things, I'll fall out of my damned chair! [promptly invents the sport of Comfy Cushion Curling] > IF we had an IMAP supported password CHANGING scheme, we'd gladly run > encrypted passwords, but there isn't, and we haven't invented (finished > inventing!) our own web-way to change 'em and so we're stuck with plain > text until one of these things changes. Your server is Linux and SSH client software has become quite available (PuTTY on Windows). For OS-based users who don't need *shell* access to the server, I've had some success just setting the "passwd" command as their login "shell" (in /etc/passwd . Plus adding it to /etc/shells if necessary.) Dunno how readily you could find an equivalent for the *virtual* accounts' password backend ... (Yes, it'd be better to have it seamlessly integrated into the IMAP protocol, but don't forget that you'd need the *MUAs* to start supporting it as well before the general public will ever even learn about the new feature ...) Kind regards, -- Jochen Bern Systemingenieur Binect GmbH

2 1

No-novice with Dovecot, but need novice-like advice (was Dovecot cracked?!)
by Richard Troy 09 Jun '23

09 Jun '23

Hi All, This is my first posting here, and maybe I should have found this WAY back in January, '23, if not LONG before. I want to be but I find it difficult here to be brief. ... Surely background will surely help: A 27 or so year old Fedora / Postfix / Dovecot site I built had a major disaster in January and I've not yet been able to fully recover because Dovecot has let the damned spammers in again and again and again and again! OH, sure, I got it down to a trickle, but these few Russian sites always managed to get their spam through and I just had to shut Dovecot down entirely. I never found out how they got in, etc. And I've STRONGLY suspected Dovecot got cracked - at least the modern version in the youngest version for the youngest Fedora we had back in January - uh, Fedora Server 37 - I've forgotten the matching Dovecot version. In the disaster, we lost /var but not /etc, so I figured recovery would be easy and for nearly everything, it was. But NOT Dovecot (and insofar as it matters, Postfix), and in these 5+ months I've tried so many things, I'm sure I've forgotten most of them and I don't know that a retroactive look is worth doing. ...I kept some notes that might be useful if anyone wants to see the evidence of the cracking, but in short, I kept a constant watch on the logs and when ANY relay happened that shouldn't, I'd instantly know it and shut things off entirely. However, that became untenable as I couldn't find the problem and had to just shut it off, pissing off users, etc, but I've had to do things like spend a month and a half traveling, and so forth and, well... Life goes on, as the saying goes. --- NOW I want to try again. It's my perception that it's a waste of time to even LOOK at the old Dovecot configuration stuff. I feel I need to REMOVE it ALL, and I could use some help being SURE to get it all gone. And then I think I need to do a FULL new installation. Overkill? IDK. I could use some advice about SAFE ways to make changes and test to ensure we do NOT become an open mail relay EVER AGAIN. ALSO WORTH SAYING is that if Dovecot were all that damned safe and secure I wouldn't so easily be able to propose a new feature that would make a HUGE difference to sites like mine: Give me a white-list of the ONLY accounts that can relay; NOTHING ELSE can relay. ... THAT would do it! But no! Neither in Postfix nor dovecot is there such a thing! Combine that with a greylist type function where the usual IP addresses for particular users were let through, and new ones delayed, THAT would be awesome, too! And this isn't even all that hard to do - I could do it if I didn't already have a thousand obligations in life! And if someone tells me I'm wrong and points me at how to do these things, I'll fall out of my damned chair! And after picking myself up, I'll find a way to send that person some sort of gift. THIS WOULD HAVE SOLVED ALL MY PROBLEMS. And I'm sure MANY others could use this, too! --- THIS configuration: I'd like to find a way to have both virtual and our existing "unix accounts" users. IF we had an IMAP supported password CHANGING scheme, we'd gladly run encrypted passwords, but there isn't, and we haven't invented (finished inventing!) our own web-way to change 'em and so we're stuck with plain text until one of these things changes. BTW, isn't this a HUGE and OBVIOUS hole that should have been fixed decades ago?! If a major provider like the Dovecot.org team added a way to update passwords to the IMAP protocol, all the rest of the folks would follow along for sure! OR, "is that a thing" and I'm just ignorant of it? So, again, plain-text, in cram, of course. What else? Coach me on "the right way" if you want, but if users can't change it themselves, they'd rather I can retrieve it for them if needed... I'm sure the corporate world doesn't do it this way, but their code isn't open source, or am I wrong?... --- In closing I don't actually anticipate ANY help. My father, an even earlier computer user than me, once observed, "you can ask for information until you're blue in the face, and nobody will say a thing, but post the WRONG thing and a hundred people will post to point out you're wrong!" GIVEN how EASY it is to have your email system become an instant open relay at the hands of the spammers out there, how the hell Dovecot can advertise the way it is WITHOUT a serious guide about this is just frustrating and laughable. But I'd love to be shown where they DO help with this! Thanks for any and all help, Richard

5 13

Remove attachments
by Oliver Glas 08 Jun '23

08 Jun '23

5 6

Help needed with imap_sieve and mail_crypt plugin
by Robert Senger 08 Jun '23

08 Jun '23

Hi there, I was using imap_sieve for many years now to pipe mails upon user action (moving mails to the SPAM folder) into spamassassin to train spam detection. This worked fine all the time. Now we're moving to encrypted mail storage on per user basis, with encrypted private keys. This works well, but it breaks the spamassassin training upon user action since it would feed encrypted mail into spamassassin, which makes no sense. So, my question is, is there a possibility to call the mail_crypt plugin from imap_sieve to decrypt the email (that means, decrypt the private key with the user password, decrypt the email that's moved to the SPAM folder) before it's piped into spamassassin? Thanks for help! Robert -- Robert Senger

2 2

Repeating imap processes crashes with signal 11 after imapc-client timeout leak
by Nikolaos Pyrgiotis 07 Jun '23

07 Jun '23

Hello, We run a 5 instances dovecot cluster ondebian 11 virtual machines, a dovecot proxy, 2directors and 2dovecot backends. All dovecot instances run version 2.3.20. We use a glusterfs mounted volume on the backends forthe mail storage. Our users all use thunderbird mail client and they do not report any issue with the imap service. Since we have configured the dovecot cluster we see multiple random imap crashes with signal 11 and timeout leaks in the logs on both the backends for multiple users. Is this is a configuration problem or a bug with imapc or imap; I would appreciate if you could assist us to debug this further. A coredump is attached if it helps. The logs look similar to this: Jun 01 16:21:13 doveb0-rmt0-cn1 dovecot[75106]: imap(user(a)domie02.com)<105800><BxSqJw39DLgKZQD+>: Warning: Timeout leak: 0x7f9a92c0c1c0 (imapc-client.c:475) Jun 01 16:21:13 doveb0-rmt0-cn1 dovecot[75106]: imap(user(a)domie02.com)<105800><BxSqJw39DLgKZQD+>: Warning: Raw backtrace for leaks: /usr/lib/dovecot/libdovecot.so.0(backtrace_append+0x42) [0x7f9a92a7e872] -> /usr/lib/dovecot/libdovecot.so.0(backtrace_get+0x1e) [0x7f9a92a7e98e] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_destroy+0x2b5) [0x7f9a92aa21e5] -> /usr/lib/dovecot/libdovecot-storage.so.0(imapc_client_run+0x115) [0x7f9a92c0bcb5] -> /usr/lib/dovecot/libdovecot-storage.so.0(imapc_mailbox_run_nofetch+0x20) [0x7f9a92c089f0] -> /usr/lib/dovecot/libdovecot-storage.so.0(imapc_mailbox_sync_init+0x868) [0x7f9a92c0b198] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_sync_init+0x58) [0x7f9a92bbfa68] -> dovecot/imap(imap_sync_init+0x95) [0x5605e4ebbe55] -> dovecot/imap(+0x17343) [0x5605e4ea5343] -> dovecot/imap(cmd_idle+0xb4) [0x5605e4ea5674] -> dovecot/imap(command_exec+0xa4) [0x5605e4eb04d4] -> dovecot/imap(+0x2044f) [0x5605e4eae44f] -> dovecot/imap(+0x204fa) [0x5605e4eae4fa] -> dovecot/imap(client_handle_input+0x1b5) [0x5605e4eae9d5] -> dovecot/imap(client_input+0x70) [0x5605e4eaef40] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x69) [0x7f9a92aa1819] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run_internal+0x132) [0x7f9a92aa2f02] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0x50) [0x7f9a92aa18c0] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x40) [0x7f9a92aa1a80] -> /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) [0x7f9a92a143c3] -> dovecot/imap(main+0x4fa) [0x5605e4e9ff0a] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xea) [0x7f9a927d2d0a] -> dovecot/imap(_start+0x2a) [0x5605e4e9ffca] Jun 01 16:23:49 doveb0-rmt0-cn1 dovecot[75106]: imap(user(a)domie02.com)<105800><BxSqJw39DLgKZQD+>: Fatal: master: service(imap): child 105800 killed with signal 11 (core dumped) Below i post the dovecot configuration of one of the two dovecot backends: # 2.3.20 (80a5ac675d): /etc/dovecot/dovecot.conf # Pigeonhole version 0.5.20 (149edcf2) # OS: Linux 5.10.0-23-amd64 x86_64 Debian 11.7 fuse.glusterfs # Hostname: doveb0-rmt0-cn1 auth_cache_negative_ttl = 5 mins auth_cache_size = 50 M auth_default_realm = domie02.com auth_master_user_separator = * auth_mechanisms = plain login auth_verbose = yes auth_worker_max_count = 16 disable_plaintext_auth = no first_valid_uid = 499 hostname = smtp.domie02.com imapc_features = fetch-bodystructure fetch-headers rfc822.size search modseq acl delay-login imapc_host = 10.101.0.250 imapc_max_idle_time = 5 mins imapc_password = # hidden, use -P to show it imapc_sasl_mechanisms = plain login imapc_ssl = starttls imapc_ssl_verify = no last_valid_uid = 499 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes login_greeting = You have successfully logged in to domie02.com IMAP server login_trusted_networks = 10.101.0.74 10.101.0.73 mail_always_cache_fields = flags hdr.* date.received date.sent mail_cache_fields = flags date.received guid size.physical size.virtual imap.bodystructure body.snippet mail_debug = yes mail_fsync = always mail_location = mdbox:/var/vmail/%d/%n/mdbox:VOLATILEDIR=/dev/shm/dovecot/%2.256Nu/%d/%n mail_plugins = " notify mail_log zlib acl" mail_privileged_group = mail managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date index ihave duplicate mime foreverypart extracttext mdbox_rotate_size = 200 M mmap_disable = yes namespace Domie02 { list = children location = imapc:/var/vmail/%d/%n/shared/indexes/%%n:INDEXPVT=/var/vmail/%d/%n/shared-pvt/%%n:VOLATILEDIR=/dev/shm/dovecot/%2.256Nu/%d/%n/%%n prefix = shared.%%n. separator = . subscriptions = no type = shared } namespace inbox { inbox = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Spam.Virus { auto = subscribe } mailbox Spam { auto = subscribe } mailbox Trash { special_use = \Trash } prefix = separator = . subscriptions = yes type = private } passdb { args = password=#hidden_use-P_to_show# driver = static master = yes override_fields = allow_real_nets=127.0.0.0/8,local,10.101.0.74,10.101.0.73 userdb_acl_user=%{auth_user} userdb_namespace/Domie02/disabled=yes result_success = continue } passdb { args = password=#hidden_use-P_to_show# driver = static override_fields = allow_real_nets=127.0.0.0/8,local,10.101.0.74,10.101.0.73 result_success = continue } passdb { args = /etc/dovecot/dovecot-ldap-users.conf.ext driver = ldap } passdb { args = /etc/dovecot/dovecot-ldap-groups.conf.ext driver = ldap } plugin { acl = vfile:/etc/dovecot/global-acls/%d/master-dovecot-acl:cache_secs=300 acl_defaults_from_inbox = yes acl_globals_only = no acl_shared_dict =file:/var/dovecot-acl/%d/shared-mailboxes.db imap_compress_deflate_level = 6 mail_log_events = flag_change mail_log_fields = uid box flags sieve =file:~/sieve;active=~/sieve/%n.sieve sieve_before = /var/vmail/global-sieve/global.sieve sieve_env_email_address = %u sieve_env_mailbox_prefix = %{userdb:mailbox_prefix} sieve_global = /var/vmail/sieve sieve_global_extensions = +editheader +vnd.dovecot.environment zlib_save = zstd zlib_save_level = 5 } protocols = " imap lmtp sieve submission" service auth-worker { user = dovecot } service auth { unix_listener auth-userdb { group = mail mode = 0666 user = vmail } } service doveadm { inet_listener dovadm-dom-mgmt { address = 10.100.1.71 port = 8080 ssl = no } inet_listener dovadm-dom { address = 10.101.0.71 port = 8080 ssl = no } vsz_limit = 256 M } service imap-login { inet_listener imap-dom { address = 10.101.0.71 port = 143 ssl = no } inet_listener imap { port = 0 } inet_listener imaps-dom { address = 10.101.0.71 port = 993 ssl = yes } inet_listener imaps { port = 0 } process_limit = 400 process_min_avail = 2 service_count = 20 vsz_limit = 512 M } service imap { process_limit = 2048 process_min_avail = 0 service_count = 1 vsz_limit = 4 G } service lmtp { inet_listener lmtp-dom { address = 10.101.0.71 port = 24 ssl = no } process_limit = 0 process_min_avail = 0 service_count = 0 unix_listener lmtp { mode = 0666 } vsz_limit = 256 M } service managesieve-login { inet_listener sieve-dom { address = 10.101.0.71 port = 4190 ssl = no } inet_listener sieve { port = 0 } process_limit = 0 process_min_avail = 0 service_count = 0 vsz_limit = 64 M } service managesieve { process_limit = 1024 process_min_avail = 0 service_count = 1 vsz_limit = 256 M } service submission-login { inet_listener submission-dom { address = 10.101.0.71 port = 587 ssl = no } inet_listener submission { port = 0 } inet_listener submissions-dom { address = 10.101.0.71 port = 465 ssl = yes } process_limit = 250 process_min_avail = 2 service_count = 1 vsz_limit = 256 M } service submission { process_limit = 1024 process_min_avail = 0 service_count = 1 vsz_limit = 256 M } ssl = required ssl_cert = </etc/ssl/certs/doveb0-rmt0-cn1.mail.rmt.domie02.com.pem ssl_client_ca_dir = /etc/ssl/certs ssl_key = # hidden, use -P to show it submission_max_mail_size = 30000 k submission_relay_host = 10.101.0.7 submission_relay_port = 587 submission_relay_ssl = starttls submission_relay_ssl_verify = no submission_relay_trusted = yes userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-ldap-users.conf.ext driver = ldap } userdb { args = /etc/dovecot/dovecot-ldap-groups.conf.ext driver = ldap } protocol lmtp { mail_plugins = " notify mail_log zlib acl sieve acl" } protocol lda { mail_plugins = " notify mail_log zlib acl sieve acl" } protocol imap { mail_max_userip_connections = 100 mail_plugins = " notify mail_log zlib acl" } protocol sieve { mail_max_userip_connections = 40 } protocol submission { mail_max_userip_connections = 70 } local 10.101.0.71 { doveadm_allowed_commands = doveadm_password = # hidden, use -P to show it } local 10.100.1.71 { doveadm_allowed_commands = doveadm_password = # hidden, use -P to show it } } Thank you, Nikolaos Pyrgiotis

2 1

sieve accepting instructions from email
by Marc 07 Jun '23

07 Jun '23

Before switching to sieve, I used to have something in procmail that would allow you to turn on an auto reply by sending an email. - send email to yourself with request - receive auth code - send auth code and auto reply text - receive confirmation the auto reply is on Is there some solution in sieve (plugin) to configure your sieve rules via such email commands?

2 1

Multiple backends with NFSv4.1 (supports file locking): should work without Director, right?
by pierre.alletru＠gmail.com 05 Jun '23

05 Jun '23

Hi Dovecot community, We're looking at running multiple Dovecot backend servers in parallel, all using the same shared NFSv4.1 mount to store mailboxes in the maildir format. We've read in multiple places that running multiple backends with a shared NFS can result in issues like index files corruption. The standard solution seems to use the Director feature, or some kind of IP based proxy/load balancer. But: 1 - The Director feature will be removed in future free versions of Dovecot (https://dovecot.org/mailman3/archives/list/dovecot@dovecot.org/thread/ILA3C…) 2 - NFSv4 and above support file locking (flock and fcntl, flock being emulated using fcntl). 3 - It looks like Dovecot does use file locking, though we're unsure if it does on everything and in particular on index files. Thus, we are wondering if the need for Director is still relevant with NFSv4? Shouldn't it work without Director thanks to file locking? Has anyone tried it? We're thinking that the documentation and various threads on the subject may be outdated, based on NFSv3 and lower (no file locking). If it doesn't work, anybody knows why? Isn't file locking there precisely to handle concurrency? Thanks!

10 17

attachments storage sub folders
by cor＠soverin.net 04 Jun '23

04 Jun '23

Hi all, we're using a separate attachment storage. Is there a way to control the subfolders that are created for each attachment? Currently the path is <user subfolder>/XX/YY/XXYY<hash>. In practice this means almost every single attachment gets its own 2 subfolders XX/YY. I'm seeing users with 5000 attachments and almost 10.000 folders. Normally this wouldn't be that big of a deal but we're using ZFS storage with metadata special device and this is causing a huge amount of additional folder metadata. It would already be helpful if we could just have a single XX/XX<hash> subfolder per user. Is that possible? Thanks, Cor dovecot 2.3.20 mail_attachment_dir = /data/attachments/%{userdb:folder} mail_attachment_fs = posix mail_attachment_hash = %{sha256:160} mail_attachment_min_size = 128k

1 0

Share
by liecj3＠bfh.ch 01 Jun '23

01 Jun '23

Hello dear Dovecot users I have a somewhat special request: I have a single file in mbox format which I want to make accessible via IMAP to anonymous logins. The mbox file is being updated outside of Dovecot and should not be changeable by Dovecot. So far I created a Docker container based on the official image (https://hub.docker.com/r/dovecot/dovecot) and configured the Dovecot according to https://doc.dovecot.org/configuration_manual/shared_mailboxes/public_shared/. The volume with the mbox file is mounted in the running container under /var/mail. Each time a client tries to access this public mailbox the following error is logged and no content is returned: May 26 21:57:06 imap(mutt)<16><Rkpg0Z/8pLfAqDAB>: Error: Mailbox Public/archive: open() failed with mbox: Read-only file system. Note that I don't need the file to be a shared mailbox. Instead I would also be happy to have all (anonymous) users mapped to the read-only mbox somewhere in the filesystem. Dockerfile: FROM dovecot/dovecot RUN mkdir -p /var/indexes/public RUN chown 1000:1000 /var/indexes/public ADD dovecot.conf /etc/dovecot/dovecot.conf /etc/dovecot/dovecot.conf: ## You should mount /etc/dovecot if you want to ## manage this file mail_home=/srv/mail/%Lu mail_location=sdbox:~/Mail mail_uid=1000 mail_gid=1000 #protocols = imap pop3 submission sieve lmtp protocols = imap first_valid_uid = 1000 last_valid_uid = 1000 passdb { driver = static args = password=pass } ssl=yes ssl_cert=<cert.pem ssl_key=<key.pem namespace { type = private inbox = yes separator = / } namespace { type = public prefix = Public/ location = mbox:/var/mail/:INDEX=/var/indexes/public subscriptions = no } listen = * log_path=/dev/stdout info_log_path=/dev/stdout debug_log_path=/dev/stdout

2 1

Using "forward_" variables in last_login_key
by Eirik Rye 01 Jun '23

01 Jun '23

Hello, In my setup, I am running dovecot with the following last_login config: plugin { last_login_dict = file:~/.last_login last_login_key = %s } I would like to distinguish between logins through webmail (Roundcube) and logins through regular IMAP clients. Roundcube sends "x-forward-service=webmail" in ID, and I have working logging for this by putting the following in login_log_format_elements: service=%{if;%{passdb:forward_service};eq;webmail;webmail;%s} (Is there may be a more elegant way to do this conditional?) This will print `service=webmail` for webmail logins, and `service=imap` for regular IMAP client logins. However, the same conditional does not work in last_login_key: last_login_key = %{if;%{passdb:forward_service};eq;webmail;webmail;%s} Using this, the login fails and the error log outputs the following error: Error: Failed to expand plugin setting last_login_key = '%{if;%{passdb:forward_service};eq;webmail;webmail;%s}': Unknown variable '%passdb' How can I tell which variables are available to use in this plugin? Are the forwarded variables not available? If not, any other suggestions on how to differentiate these logins in last_login? Looking at the remote_ip is not feasible for my setup. Best regards, Eirik

2 1

GSSAPI auth Line too long
by Thomas Lemarchand 31 May '23

31 May '23

Hello, On version 2.3.20 (80a5ac675d), I have a problem with submission-login when using GSSAPI auth : it's not working, probably due to AUTH line being too long. It appeared after I activated PAC on my Kerberos infrastructure. Now the Kerberos tickets contains MS-PAC data and are bigger. It's part of the RFC and is a valid use case : https://datatracker.ietf.org/doc/html/rfc4120#section-5.2.6 Logs : May 30 17:13:00 auth: Debug: auth client connected (pid=378) May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: Sent: 220 mail.int.k8s.lemarchand.io Dovecot ready. May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: Received new command: EHLO [192.168.202.16] May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command EHLO: New command May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command EHLO: Execute command May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command EHLO: Pipeline blocked May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command EHLO: 250 reply: Submitted May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command EHLO: Replied May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command EHLO: Ready to reply May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: Trigger output May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command EHLO: Next to reply May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: Sending replies May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command EHLO: Next to reply May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command EHLO: Completed May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command EHLO: Pipeline unblocked May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: Connection state reset May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command EHLO: 250 reply: Sent: 250-mail.int.k8s.lemarchand.io 8BITMIME AUTH GSSAPI PLAIN LOGIN BURL imap CHUNKING ENHANCEDSTATUSCODES SIZE P IPELINING May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command EHLO: Finished May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command EHLO: Destroy May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command EHLO: 250 reply: Destroy May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: Trigger output May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: No more commands pending May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: Sending replies May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: No more commands pending May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: Client sent invalid command: Command line is too long May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command [unknown]: Invalid command May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command [unknown]: 500 reply: Submitted May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command [unknown]: Replied May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command [unknown]: Ready to reply May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: Trigger output May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: Sending replies May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command [unknown]: Next to reply May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command [unknown]: Completed May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command [unknown]: 500 reply: Sent: 500 5.5.2 Line too long May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command [unknown]: Finished May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command [unknown]: Destroy May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: command [unknown]: 500 reply: Destroy May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: Trigger output May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: No more commands pending May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: Sending replies May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: No more commands pending May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: Remote closed connection: Connection closed May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: Disconnected: Connection closed May 30 17:13:00 submission-login: Debug: smtp-server: conn 10.200.114.128:13587 [1]: Connection state reset My guess is that it's due to https://github.com/dovecot/core/blob/main/src/lib-smtp/smtp-common.h#L10 being too low (is it configurable ?), but I didn't read the code thoroughly. Red Hat IDM now activates MS-PAC by default, so any installation based on IDM (or FreeIPA) may have the same problem. What's your opinion ? Bug ? Mail sent using password auth :'( -- Thomas Lemarchand

4 7

Inconsistent listing of shared subfolders
by mschering＠intermesh.nl 30 May '23

30 May '23

Hi all, I have a problem with listing shared folders. In my web application I don't get the whole folder tree at once but get them level by level with: LIST "" "subfolder/%" RETURN (CHILDREN) Now I have an issue with shared folders. If I share folder test/sub with another user it returns it's (not shared) parent folder with this command: LIST "" "shared/someuser/%" RETURN (CHILDREN) But if I do the same with INBOX/sub it will not return the "INBOX" folder with the above command. Is that a bug or does anybody know why it behaves differently? Also, If I do: LIST "" "shared/someuser/*" RETURN (CHILDREN) it will return both the subfolder of test and inbox. My shared namespace is setup like this: namespace { type = shared separator = / prefix = shared/%%u/ # a) Per-user seen flags. Maildir indexes are shared. (INDEXPVT requires v2.2+) location = maildir:%%h/Maildir:INDEXPVT=~/Maildir/shared/%%u # b) Per-user seen flags. Maildir indexes are not shared. If users have direct filesystem level access to their mails, this is a safer option: #location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u:INDEXPVT=~/Maildir/shared/%%u subscriptions = no list = children } Thanks for any help! Best regards, Merijn

1 0

Outlook Duplicate emails
by Nick Lekkas 29 May '23

29 May '23

Hello there to all ! I have 2 postfix/dovecot mailservers. Those mailservers are synced using replicator enabled. The dovecot versions I use is 2.3.16 on Rocky Linux 9 .The configuration issued from CentOS 7 mailservers with replicator enabled using 2.2.36. The config is the same in both 2 couple servers. I have issue with pop3 and outlook that receives duplicate email in many cases and in some accounts. Have anyone faced any similar issue.? Any help appreciated... Best Regards Nick __________ ESET Endpoint Antivirus __________ This email was scanned, no threats were found. email from: to: with subject Outlook Duplicate emails dated 29/05/2023 - is OK Detection engine version: 27314 (20230529) https://www.eset.com

2 1

RE: LDAP olcAccess for auth_bind
by Marc 29 May '23

29 May '23

> >> > >> I really got your point, but how you will implement aliases > > has nothing to do with dovecot, sendmail can get those from ldap. > > > >> or domain > > sendmail gets these from ldap (but requires a restart) > > > >> query or maybe quota? You still need to access ldap directly for > other > >> info's. > > quotas can be/are distributed to the os by ldap. But it depends a bit > on your setup, and if you have multiple file systems. > > > >> I mean, dovecot can probably use linux login but i'm not sure about > the > >> MTA. Unless you have a fixed list of domains added manually. > >> > > I have on different servers cron jobs running, getting every 5?min > modified/created records and then do a restart or something else. All > these processes have own entity in ldap with own acls. > > sendmail can get anything you want from ldap. For outgoing mail auth, > I have sendmail use os users (which come from ldap) > > > So in the end you still access ldap from another program but not from > dovecot :) I don't get your point. The goal for using ldap is having a centralized database that distributes information. How you choose to implement this, is depending on your requirements. > You avoid to authenticate users directly only to send the credentials of > some privilleged user from postfix/sendmail/whatever script... > Not to avoid. Other applications have different needs and thus different acl's. Dovecot does not need to know a users email address or alias. Only the MTA needs to know. The relaying MTA does not need to know the user etc.

1 0

LDAP olcAccess for auth_bind
by Andrzej Milewski 28 May '23

28 May '23

Hi, I'm trying to set up a production mail server. I have installed Dovecot on Debian from the package. For authentication, I have another machine running OpenLDAP, also installed on Debian. I would like the end mail client to authenticate with Dovecot using the login and password set in LDAP. In the LDAP-related configuration, I have: auth_bind=yes base = ou=Users,dc=example,dc=com user_attrs = mail=couriermaildir:~/Maildir,homeDirectory=/home/%d/%uid/,uidNumber=uid,gidNumber=gid user_filter = (&(objectClass=posixAccount)(uid=%u)) pass_attrs = uid=user,userPassword=password,\ pass_filter = (&(objectClass=posixAccount)(uid=%u)) The LDAP user is entered as uid=user(a)example.com. With the default olcAccess permissions, it works and logs in correctly. Here are my default olcAccess settings after installation: # {1}mdb, config dn: olcDatabase={1}mdb,cn=config objectClass: olcDatabaseConfig objectClass: olcMdbConfig olcDatabase: {1}mdb olcDbDirectory: /var/lib/ldap olcSuffix: dc=example,dc=com olcAccess: {0}to dn.children="ou=Idmaps,dc=example,dc=com" attrs=userPassword, shadowLastChange,SambaLMPassword,SambaNTPassword by self write by anonymous a uth by dn="cn=samba,dc=example,dc=com" write by dn="cn=admin,dc=laktopol,dc=p l" write by * none olcAccess: {1}to dn.subtree="ou=Idmaps,dc=example,dc=com" by self write by dn= "cn=samba,dc=example,dc=com" write by dn="cn=admin,dc=example,dc=com" write b y * read olcAccess: {2}to dn.children="ou=Hosts,dc=example,dc=com" attrs=userPassword,s hadowLastChange,SambaLMPassword,SambaNTPassword by self write by anonymous au th by dn="cn=samba,dc=example,dc=com" write by dn="cn=admin,dc=example,dc=com " write by * none olcAccess: {3}to dn.subtree="ou=Hosts,dc=example,dc=com" by self write by dn=" cn=samba,dc=example,dc=com" write by dn="cn=admin,dc=example,dc=com" write by * read olcAccess: {4}to dn.children="ou=Users,dc=example,dc=com" attrs=userPassword,s hadowLastChange,SambaLMPassword,SambaNTPassword by self write by anonymous au th by dn="cn=samba,dc=example,dc=com" write by dn="cn=nsspam,dc=laktopol,dc=p l" write by dn="cn=admin,dc=example,dc=com" write by * none olcAccess: {5}to dn.children="ou=Users,dc=example,dc=com" by self write by dn= "cn=samba,dc=example,dc=com" write by dn="cn=nsspam,dc=example,dc=com" write by dn="cn=admin,dc=example,dc=com" write by * read olcAccess: {6}to filter=(objectClass=sambaDomain) by dn="cn=samba,dc=laktopol, dc=pl" write by dn="cn=admin,dc=example,dc=com" write by * read olcAccess: {7}to dn.base="dc=example,dc=com" attrs=children by dn="cn=samba,dc =laktopol,dc=pl" write by dn="cn=admin,dc=example,dc=com" write by * read olcAccess: {8}to attrs=userPassword,shadowLastChange,SambaLMPassword,SambaNTPa ssword by self write by anonymous auth by dn="cn=nsspam,dc=example,dc=com" wr ite by dn="cn=admin,dc=example,dc=com" write by * none olcAccess: {9}to attrs=shadowLastChange by self write by * read olcAccess: {10} to * by * read However, I am not satisfied with these settings because using the anonymous user, anyone can browse the entire LDAP tree. While passwords are not visible with anonymous login, user data in the LDAP domain is exposed. If I change the last olcAccess entry from "olcAccess: {10} to * by * read" to "olcAccess: {10} to * by anonymous auth," the anonymous user cannot browse LDAP, but the mail client user also cannot log in. What should be the correct configuration? -- Andrzej

4 12

Outlook fails to connect to Dovecot submission server
by Ralf Becker 28 May '23

28 May '23

Dovecot 2.3.20 including it's submission server works well with all sorts of clients, but Outlook. Outlook works / can connect to Dovecot IMAP service with same certificate TLS config, but it fails to connect using SMTPs on port 465. Other clients connect and send mails without problem, also openssl s_client can connect and reports no problems. I tried with Outlook Version 365 on Windows 11 (no cloud) and "Microsoft® Outlook® 2021 MSO (Version 2304 Build 16.0.16327.20200) 64-bit". I already enabled all submission_client_workarounds and lowered min_ssl_version from TLSv1.2 to TLSv1, but that changed nothing. I can see nothing failing in the logs, thought the OL connection wizard always check IMAP and SMTP together, so it's hard to say what the problem is. The same two Outlook version connect without a problem to Postfix authenticating via SASL to Dovecot also requiring a minimum TLS version of 1.2. They just wont connect with Dovecot submission server. Any ideas what's wrong, or how to debug that further? Ralf -- Ralf Becker EGroupware GmbH [www.egroupware.org] Handelsregister HRB Kaiserslautern 3587 Geschäftsführer Birgit und Ralf Becker Leibnizstr. 17, 67663 Kaiserslautern, Germany Telefon +49 631 31657-0

5 8

Inaccurate results while searching for a phrase in subject (fts-flatcurve)
by ss17＠fea.st 26 May '23

26 May '23

Hi, I had been using the lucene FTS plugin since a decade now and it has done me well. Thought of upgrading to the new & current stuff and came across the flatcurve plugin which seems very promising (xapian on the other hand was creating indexes larger than my mailboxes themselves). I am using following configuration in dovecot.conf: fts = flatcurve fts_filters_en = lowercase english-possessive stopwords fts_languages = en fts_tokenizers = generic email-address fts_autoindex = no fts_enforced = yes A search command like this: doveadm -D search -u john(a)doe.com mailbox INBOX SUBJECT "/home/johndoe/render.php" should show the messages with subject: "CRON: /home/johndoe/render.php OK" but produces a lot of extra undesired results and I think the second line in this debug output indicates the reason: May 23 07:44:13 doveadm(john(a)doe.com): Debug: fts-flatcurve(INBOX): Query (hdr_subject:/home/johndoe/render.php*) matches=0 uids= May 23 07:44:13 doveadm(john(a)doe.com): Debug: fts-flatcurve(INBOX): Query (hdr_subject:php* AND hdr_subject:render* AND hdr_subject:johndoe* AND hdr_subject:home*) matches=272 uids=67041,67085,67188,67223,67257,67290,67323,67355,67395,67564,67770,67817,67863,67985,68819,69512,69572,69635,69737,70017,70058,70086,70125,70147,70191,70296,70304,70331,70340,70350,70354,70375,70407,70417,70427,70449,70499,70521:70522,70535:70550,70555,70561:70563,70591,70597:70599,70662,70685,70702,70708,70718:70719,70724,70727:70728,70730:70733,70735,70746:70747,70754,70775,70777,70794,70811:70812,70822,70866,70942,70948,70971,71017,71021,71040,71042,71075,71079,71084,71113,71128:71129,71131,71152,71160,71184,71188,71208,71214,71225,71255,71269,71297,71300,71331,71375,71422,71449,71457,71467,71469,71495,71515,71605,71626,71632,71649,71672,71681:71682,71689,71692,71699,71716,71757,71770,71777,71782:71785,71790,71795,71797,71814,71818:71819,71828,71838:71842,71845,71859:71860,71937,71947,71954,71960,71963:71964,71977,71990,72014,72021:72022,72030,72034:72042,72045:72046,72049,72056,72061,72063,72073:72074,72083,72088,72090,72092,72101,72108,72129,72131:72132,72134,72136:72140,72159,72163,72172:72173,72186,72212,72218:72223,72237,72239,72246,72267,72288,72387,72410,72446,72469,72476:72477,72514,72541,72543,72568:72569,72572:72574,72598,72604,72606,72609,72644,72674,72687,72691,72694,72734,72772,72791,72797,72799,72803,72832:72833,72835:72841,72856:72857,72866:72867,72873:72874,72901,72930,72938,72948,72960,72965,72976,73018,73037,73071,73081,73116,73158,73249,73307,73352,73392,73466,73533,73601,73670,73733,73775,73784:73786,73804,73807,73811,73815,73819,73823,73825,73831,73842,73846,74005,74199,74390,74540,74684,74854,75017,75192,75354,75525,75710,75839:75843,75845,75903,75984:75985,76091,76263,76447,76624,76816,76989,77091:77092,77097,77119,77155,77293,77460,77608,77761,77908,78066,78218,78393,78400:78401,78522:78523,78560,78728,78921,79104,79298,79504,79555,79898,80027,80031:80032,80034:80035,80037,80056,80071,80073,80077:80079,80082:80084,80086,80089 I tried rebuilding the indexes with "fts_flatcurve_substring_search = yes" too but that didn't change anything. It works as expected with lucene plugin because in that case header search is performed via dovecot indexes instead of FTS. May be I am not doing something right in configuring this new FTS? Will really appreciate some pointers here. Thanks, Sam

2 2

dovecot indexer-workers
by Nikolay Zlatkov 26 May '23

26 May '23

Hi, I have a problem with dovecot indexer-workers starting at the same time everyday and using too much disk io and cpu. I have limited indexer-workers to 2, but i am not sure this is the solution. Can you help me to configure this automatic reindex to be in the night for example. Best Regards! -- Николай Златков / Nikolay Zlatkov Системен администратор / System Administrator CALLFLOW mobilePhone +359 87 986 85 32 <tel:+359 87 986 85 32> emailAddress nzlatkov(a)callflowlab.com <mailto:nzlatkov@callflowlab.com> website www.callflowlab.com <//www.callflowlab.com> address Magnaurska shkola 11 Str., Office 310, Sofia 1784 All channels. One place. | OMNILINX | Check out our new product. <https://omnilinx.com/?utm_source=email&utm_medium=signature>

1 0

The (doveadm search HEADER "Header" "") command does not return email which have the header "Header"
by Léo El Amri 26 May '23

26 May '23

Hello there, When using the doveadm command (search HEADER "X-Discourse-Post-Id" "") or the IMAP command (SEARCH HEADER X-Discourse-Post-Id ""), emails containing a X-Discourse-Post-Id header are not listed. I've also tried with non X- headers, such as List-Unsubscribe and Auto-Submitted. RFC 3501 [1] and Dovecot's documentation [2] both says that this command should return emails containing the header searched. I couldn't find a mention of this bug in the git history, hence why I'm posting here, maybe there is something wrong with my installation ? I'm running Dovecot 2.3.20 on Debian on amd64 with an ext4 filesystem. I attached the output of dovecot -n. [1]: https://www.rfc-editor.org/rfc/rfc3501.html#section-6.4.4 [2]: https://wiki.dovecot.org/Tools/Doveadm/SearchQuery -- Cordially, Léo

1 1