- dovecot - dovecot.org

[Dovecot] dsync/imapc migration question
by Gedalya 12 Jul '13

12 Jul '13

Doing an imapc migration with the pop3 migration plugin, using doveadm backup -R. I occasionally get the following output: dsync(user(a)domain.tld): Error: imapc(mail01.domain.tld:143): Server disconnected unexpectedly dsync(user(a)domain.tld): Error: imapc(mail01.domain.tld:143): Server disconnected unexpectedly dsync(user(a)domain.tld): Error: imapc(mail01.domain.tld:143): Server disconnected unexpectedly dsync(user(a)domain.tld): Warning: I/O leak: 0xb7648650 (line 1229, fd 10) dsync(user(a)domain.tld): Warning: I/O leak: 0xb7648650 (line 1229, fd 11) dsync(user(a)domain.tld): Warning: Timeout leak: 0xb76488b0 (line 1316) dsync(user(a)domain.tld): Warning: Timeout leak: 0xb76488b0 (line 1316) The source server is really crappy, no need to look at the dovecot side for causes. My question is: is it possible that the migration did complete successfully? Dovecot does seem to continue and it's kind of vague on what went wrong, and did it re-try. This operation can take several hours on large mailboxes so this question is really meaningful in my case. (I'd try with -D but it's really hard to reproduce this on demand). Thanks Gedalya

2 3

Re: [Dovecot] SSL cert problem
by Reindl Harald 11 Jul '13

11 Jul '13

Am 11.07.2013 21:51, schrieb Peter von Nostrand: > On Thu, Jul 11, 2013 at 4:23 PM, Reindl Harald > because thunderbird does not trust your own CA by default > without import it there by hand - you can not expect to > cat your CA to the cert for the server and that is enough > to get truested by the client - if so everybody would do > this to make his DNS forgery successful > > Sorry, I should specify that I already have my root CA certificates loaded in thunderbird much more important you should reply this to the list and not off-list, fixed by me, no need to send it again

1 0

[Dovecot] Pigeonhole vacation auto-response not respecting "days" parameter
by Thomas Harold 11 Jul '13

11 Jul '13

This might be a PEBKAC on my end, but in our old server, "vacation" responses would only be sent back to an origin address once per day because we had ":days 1" in the rule. On the new server, even though we have ":days 1", pigeonhole is sending responses to every message, resulting in multiple vacation responses each day back to each origin address. The following was generated by Roundcube's web interface, it looks to be correct. ----------------------- require ["vacation"]; # rule:[vacation-reply] if allof (not header :contains "Subject" "[spam]", not exists "List-Unsubscribe") { vacation :days 1 :addresses ["email1(a)example.com","email2(a)example.com"] :subject "Out of office reply" text: I am currently out of the office July 11th and 12th, returning on July 15th. During this time I will have no access to email. Thank you. User So-And-So . ; } ----------------------- Interestingly, if I look at .dovecot.sieve.log, I see error messages like (except that the vacation responses are, in reality, being sent): error: msgid=<20130711134816.35B9A40335(a)mail.example.com>: failed to send vacation response to <originemail(a)example.com> (refer to server log for more information). And in the maillog: Jul 11 09:48:17 servername sendmail[28244]: r6BDmHem028244: SYSERR(UID1132): Who are you? Jul 11 09:48:17 servername sendmail[28244]: r6BDmHem028244: Authentication-Warning: servername .example.com: Unknown UID 1132 set sender to <> using -f Jul 11 09:48:17 servername sendmail[28244]: r6BDmHem028244: from=<>, size=725, class=-60, nrcpts=1, msgid=<dovecot-sieve-1373550497-202242-0(a)servername.example.com>, relay=Unknown UID 1132@localhost My guess at this point is that I've failed to configure pigeonhole and/or postfix's copy of the sendmail command properly so that it can create the "who I have send mail to recently" file.

1 0

[Dovecot] Fault in dovecot 2.1.17
by Adrian Stoica 11 Jul '13

11 Jul '13

The system hang, linux from scratch. I have changed the live kernel from linux-2.6.35.4 to linux-2.6.32.61 , to see if the fault still occurs. The kernel 2.6.35.4 was working fine with all version up to dovecot 2.1.12 , from which i made update to 2.1.17. dovecot -n # 2.1.17: /usr/dovecot21/etc/dovecot/dovecot.conf # OS: Linux 2.6.32.61 i686 auth_cache_negative_ttl = 1 secs auth_cache_size = 2 M auth_failure_delay = 4 secs auth_mechanisms = plain login digest-md5 cram-md5 auth_worker_max_count = 100 base_dir = /var/run/dovecot/ default_client_limit = 4096 default_internal_user = vmail default_login_user = nobody default_process_limit = 256 deliver_log_format = mail delivery from=%f subject=%s msgid=%m: %$ dict { acl = mysql:/usr/dovecot21/etc/dovecot/dovecot-dict-sql.conf.ext } disable_plaintext_auth = no first_valid_uid = 1 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes listen = * mail_location = maildir:~/Maildir mail_plugins = " quota acl trash notify mail_log" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { hidden = no list = children location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u prefix = shared/%%u/ separator = / subscriptions = no type = shared } namespace inbox { inbox = yes list = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / subscriptions = yes type = private } passdb { args = /usr/dovecot21/etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { acl = vfile acl_defaults_from_inbox = yes acl_shared_dict = proxy::acl autocreate = Trash autocreate2 = Drafts autocreate3 = Sent autosubscribe = Trash autosubscribe2 = Drafts autosubscribe3 = INBOX autosubscribe4 = Sent mail_log_events = delete mailbox_delete mailbox_rename mail_log_fields = box subject from msgid size quota = maildir:User quota quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=95%% quota-warning 90 %u quota_warning3 = storage=85%% quota-warning 85 %u sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_max_redirects = 10 trash = /usr/dovecot21/etc/dovecot/dovecot-trash.conf.ext } postmaster_address = postmaster(a)dacris.net protocols = imap quota_full_tempfail = yes rejection_subject = Rejected: %s: %r service auth { unix_listener auth-client { mode = 0666 user = vmail } unix_listener auth-userdb { mode = 0666 user = vmail } } service dict { unix_listener dict { user = vmail } } service imap-login { process_min_avail = 4 } service imap-postlogin { executable = script-login /bin/imap.sh unix_listener imap-postlogin { mode = 01232 } } service imap { executable = imap imap-postlogin process_limit = 1024 vsz_limit = 1 G } service quota-warning { executable = script /bin/quota_warning.sh unix_listener quota-warning { user = vmail } user = vmail } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = /usr/dovecot21/etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lda { mail_plugins = " quota acl trash notify mail_log sieve autocreate" } protocol imap { imap_client_workarounds = delay-newmail mail_max_userip_connections = 20 mail_plugins = " quota acl trash notify mail_log imap_quota imap_acl" } Log from kernel: Jul 11 10:14:01 mail kernel: BUG: Bad page map in process imap-login pte:c926b025 pmd:4597c067 Jul 11 10:14:01 mail kernel: page:c2f2ed60 count:1 mapcount:-1 mapping:ec5a03a0 index:0x4ab Jul 11 10:14:01 mail kernel: page flags: 0x80020068(uptodate|lru|active|mappedtodisk) Jul 11 10:14:01 mail kernel: addr:b73f4000 vm_flags:08000075 anon_vma:(null) mapping:e289ec88 index:7b Jul 11 10:14:01 mail kernel: vma->vm_ops->fault: filemap_fault+0x0/0x2fa Jul 11 10:14:01 mail kernel: vma->vm_file->f_op->mmap: ext4_file_mmap+0x0/0x39 Jul 11 10:14:01 mail kernel: Pid: 22889, comm: imap-login Not tainted 2.6.35.4 #2 Jul 11 10:14:01 mail kernel: Call Trace: Jul 11 10:14:01 mail kernel: [<c1078901>] ? print_bad_pte+0x13a/0x14b Jul 11 10:14:01 mail kernel: [<c107b206>] ? unmap_vmas+0x33b/0x62d Jul 11 10:14:01 mail kernel: [<c10272cc>] ? try_to_wake_up+0x206/0x210 Jul 11 10:14:01 mail kernel: [<c107ccc7>] ? exit_mmap+0x8c/0x107 Jul 11 10:14:01 mail kernel: [<c102976f>] ? mmput+0x1c/0x8c Jul 11 10:14:01 mail kernel: [<c102c850>] ? exit_mm+0xdc/0xe4 Jul 11 10:14:01 mail kernel: [<c103da3c>] ? hrtimer_try_to_cancel+0x55/0x5b Jul 11 10:14:01 mail kernel: [<c104dd0d>] ? acct_collect+0x77/0x126 Jul 11 10:14:01 mail kernel: [<c102dccb>] ? do_exit+0x1c8/0x5bc Jul 11 10:14:01 mail kernel: [<c109fd4d>] ? mntput_no_expire+0x15/0xad Jul 11 10:14:01 mail kernel: [<c102e119>] ? do_group_exit+0x5a/0x7d Jul 11 10:14:01 mail kernel: [<c102e14d>] ? sys_exit_group+0x11/0x14 Jul 11 10:14:01 mail kernel: [<c100254c>] ? sysenter_do_call+0x12/0x22 Jul 11 10:14:01 mail kernel: Disabling lock debugging due to kernel taint Jul 11 10:14:01 mail kernel: BUG: Bad page state in process imap-login pfn:c926b Jul 11 10:14:01 mail kernel: page:c2f2ed60 count:0 mapcount:-1 mapping:ec5a03a0 index:0x4ab Jul 11 10:14:01 mail kernel: page flags: 0x80020008(uptodate|mappedtodisk) Jul 11 10:14:01 mail kernel: Pid: 22889, comm: imap-login Tainted: G B 2.6.35.4 #2 Jul 11 10:14:01 mail kernel: Call Trace: Jul 11 10:14:01 mail kernel: [<c106c916>] ? bad_page+0x9c/0xae Jul 11 10:14:01 mail kernel: [<c106d4dc>] ? free_pages_prepare+0x55/0xc5 Jul 11 10:14:01 mail kernel: [<c106d5f0>] ? free_hot_cold_page+0x20/0xef Jul 11 10:14:01 mail kernel: [<c106d739>] ? __pagevec_free+0x1a/0x21 Jul 11 10:14:01 mail kernel: [<c106fb3a>] ? release_pages+0x165/0x16d Jul 11 10:14:01 mail kernel: [<c1083302>] ? free_pages_and_swap_cache+0x68/0x74 Jul 11 10:14:01 mail kernel: [<c107b251>] ? unmap_vmas+0x386/0x62d Jul 11 10:14:01 mail kernel: [<c10272cc>] ? try_to_wake_up+0x206/0x210 Jul 11 10:14:01 mail kernel: [<c107ccc7>] ? exit_mmap+0x8c/0x107 Jul 11 10:14:01 mail kernel: [<c102976f>] ? mmput+0x1c/0x8c Jul 11 10:14:01 mail kernel: [<c102c850>] ? exit_mm+0xdc/0xe4 Jul 11 10:14:01 mail kernel: [<c103da3c>] ? hrtimer_try_to_cancel+0x55/0x5b Jul 11 10:14:01 mail kernel: [<c104dd0d>] ? acct_collect+0x77/0x126 Jul 11 10:14:01 mail kernel: [<c102dccb>] ? do_exit+0x1c8/0x5bc Jul 11 10:14:01 mail kernel: [<c109fd4d>] ? mntput_no_expire+0x15/0xad Jul 11 10:14:01 mail kernel: [<c102e119>] ? do_group_exit+0x5a/0x7d Jul 11 10:14:01 mail kernel: [<c102e14d>] ? sys_exit_group+0x11/0x14 Jul 11 10:14:01 mail kernel: [<c100254c>] ? sysenter_do_call+0x12/0x22

3 2

[Dovecot] Dovecot 2.2.4 : Panic: file pop3-client.c: line 585 (client_default_destroy): assertion failed: (client->cmd == NULL)
by Ken A 11 Jul '13

11 Jul '13

This doesn't seem to affect clients, but I'm seeing an occasional pop3 error in the log over the last week. Any ideas what is causing this? Thanks, Ken > Jul 4 15:04:03 mail dovecot: POP3(user)x.x.x.x: Connection > closed top=0/0, retr=0/0, del=0/4582, size=246709805 > Jul 4 15:04:03 mail dovecot: POP3(user)x.x.x.x: Panic: file > pop3-client.c: line 585 (client_default_destroy): assertion failed: > (client->cmd == NULL) > Jul 4 15:04:03 mail dovecot: POP3(user)x.x.x.x: Error: Raw > backtrace: /usr/lib/dovecot/libdovecot.so.0() [0x31b4c6074a] -> > /usr/lib/dovecot/libdovecot.so.0() [0x31b4c60796] -> > /usr/lib/dovecot/libdovecot.so.0(i_error+0) [0x31b4c202df] -> > dovecot/pop3() [0x404df9] -> dovecot/pop3(client_handle_input+0xd4) > [0x4051b4] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_call_io+0x36) > [0x31b4c6f6d6] -> > /usr/lib/dovecot/libdovecot.so.0(io_loop_handler_run+0xa7) > [0x31b4c70737] -> /usr/lib/dovecot/libdovecot.so.0(io_loop_run+0x28) > [0x31b4c6f678] -> > /usr/lib/dovecot/libdovecot.so.0(master_service_run+0x13) > [0x31b4c24fa3] -> dovecot/pop3(main+0x257) [0x4043d7] -> > /lib64/libc.so.6(__libc_start_main+0xfd) [0x3a08e1ecdd] -> > dovecot/pop3() [0x403f29] > Jul 4 15:04:04 mail dovecot: POP3(user)x.x.x.x: Fatal: master: > service(pop3): child 9080 killed with signal 6 (core dumped) -- Ken Anderson Pacific Internet - http://www.pacific.net

2 2

[Dovecot] How to manipulate attachments with LDA?
by Piotr Szafarczyk - NetExpert 10 Jul '13

10 Jul '13

Hi All, I want to plug in a tool that will convert attachments somewhere into a mail delivery process (postfix->dovecot). I think deliver would be a good place to do it. Does it make sense? Could you direct me where I could read about how to do it please? Piotr Szafarczyk

2 4

[Dovecot] Crashes with 2.2.4 setup that worked perfectly with 2.2.2 (.2.3 also crashes)
by Trever L. Adams 10 Jul '13

10 Jul '13

I am not sure how to get the symbols necessary, however the following is the backtrace (this is Fedora 19 latest everything): Jul 8 03:23:02 MX dovecot: auth: Fatal: block_alloc(2147483648): Out of memory Jul 8 03:23:02 MX dovecot: auth: Error: Raw backtrace: /usr/lib64/dovecot/libdovecot.so.0(+0x5f437) [0x7f97a952f437] -> /usr/lib64/dovecot/libdovecot.so.0(+0x5f4fe) [0x7f97a952f4fe] -> /usr/lib64/dovecot/libdovecot.so.0(i_error+0) [0x7f97a94f070f] -> /usr/lib64/dovecot/libdovecot.so.0(+0x72ee8) [0x7f97a9542ee8] -> /usr/lib64/dovecot/libdovecot.so.0(+0x72f1f) [0x7f97a9542f1f] -> /usr/lib64/dovecot/libdovecot.so.0(sasl_client_new+0x31) [0x7f97a9526ac1] -> /lib64/libldap-2.4.so.2(ldap_int_sasl_open+0x5c) [0x7f97a62f058c] -> /lib64/libldap-2.4.so.2(ldap_int_sasl_bind+0x5c9) [0x7f97a62f0cd9] -> /lib64/libldap-2.4.so.2(ldap_sasl_interactive_bind+0x96) [0x7f97a62f3e46] -> /lib64/libldap-2.4.so.2(ldap_sasl_interactive_bind_s+0xe1) [0x7f97a62f4041] -> /usr/lib64/dovecot/auth/libauthdb_ldap.so(db_ldap_connect+0x146) [0x7f97a652f286] -> dovecot/auth(userdb_init+0x1a) [0x7f97a99e09ea] -> dovecot/auth(auths_init+0xc9) [0x7f97a99c8e29] -> dovecot/auth(main+0x335) [0x7f97a99c8225] -> /lib64/libc.so.6(__libc_start_main+0xf5) [0x7f97a8ae8b75] -> dovecot/auth(+0xe43d) [0x7f97a99c843d] Jul 8 03:23:02 MX dovecot: master: Error: service(auth): command startup failed, throttling for 60 secs Jul 8 03:23:02 MX dovecot: auth: Fatal: master: service(auth): child 9650 returned error 83 (Out of memory (service auth { vsz_limit=256 MB }, you may need to increase it)) Any help would be greatly appreciated. Thank you, Trever

4 10

[Dovecot] Have an issue with catch-all - Dovecot-lda andPostfix
by Joakim Ohlsson 10 Jul '13

10 Jul '13

Hi, I run dovecot version 2.1.7 and postfix 2.9.6. I'm using dovecot-lda as local delivery. I use virtual users and need to use catch-all for some of my domains. My problem when using catch-all is that I got a separate email for each recipient. As an example: If I send mail to: test1(a)test.org, test2, test3(a)test.org, test4(a)test.org and have a catch-all which will send this mail to test(a)test.org. In this example I get 4 mails in my test(a)test.org inbox and in TO: field in the header I have all this four recipients: TO: test1(a)test.org, test2, test3(a)test.org, test4(a)test.org. In my dovecot log: 2013-07-10 13:49:25 lda(test(a)test.org): Debug: Destination address: test(a)test.org (source: user@hostname) 2013-07-10 13:49:25 lda(test(a)test.org: Info: msgid=<20130710114924.DBA3F9FA8D(a)mail2.test.org>: saved mail to INBOX 2013-07-10 13:49:25 lda(test(a)test.org): Info: msgid=<20130710114924.DBA3F9FA8D(a)mail2.test.org>: saved mail to INBOX 2013-07-10 13:49:25 lda(test(a)test.org): Info: msgid=<20130710114924.DBA3F9FA8D(a)mail2.test.org>: saved mail to INBOX 2013-07-10 13:49:25 lda(test(a)test.org): Info: msgid=<20130710114924.DBA3F9FA8D(a)mail2.test.org>: saved mail to INBOX My question is if it's possible to receive just one mail instead of four? If I send the mail via Spamassassin I'll just receive one mail to test(a)test.org with TO: test1(a)test.org, test2, test3(a)test.org, test4(a)test.org in the header. Thanks in advance Br Joakim # dovecot -n:

3 2

[Dovecot] DOVECOT 2.2.4 = 501 5.5.4 Unsupported options in LMTP
by Dmitry Dmitry 10 Jul '13

10 Jul '13

Hi, Sorry for my english. My problem: *************************************************** dspam-3.9.0 (dspam-3.10.2 all the time segmentation fault) dspam.conf .................... # DeliveryHost /var/run/dovecot/lmtp # same error as IP DeliveryHost 127.0.0.33 DeliveryPort 24 DeliveryProto LMTP .................... ServerHost 192.168.1.34 ServerPort 24 ServerQueueSize 32 ServerPID /var/run/dspam/dspam.pid *************************************************** dovecot-2.2.4 10-master.conf service lmtp { # Create inet listener only if you can't use the above UNIX socket inet_listener lmtp { # Avoid making LMTP visible for the entire internet address = 127.0.0.33 port = 24 } } quota is not included *************************************************** telnet to dspam LMTP # telnet 192.168.1.34 24 Trying 192.168.1.34... Connected to 192.168.1.34. Escape character is '^]'. 220 DSPAM LMTP 3.9.0 Ready LHLO test.com 250-localhost.localdomain 250-PIPELINING 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 SIZE MAIL FROM:<test(a)test.com> 250 2.1.0 OK RCPT TO:<user(a)test.com> 250 2.1.5 OK DATA 354 Enter mail, end with "." on a line by itself 1234567 qwertyu asdfghj . 530 5.3.0 <user(a)test.com> Fatal: 501 5.5.4 Unsupported options QUIT 221 2.0.0 OK Connection closed by foreign host. *************************************************** at the same time tcpflow LMTP # tcpflow -c -i any host 127.0.0.33 127.000.000.033.00024-127.000.000.001.41663: 220 mail Dovecot ready. 127.000.000.001.41663-127.000.000.033.00024: LHLO localhost 127.000.000.001.41663-127.000.000.033.00024: 127.000.000.033.00024-127.000.000.001.41663: 250-mail 250-8BITMIME 250-ENHANCEDSTATUSCODES 250 PIPELINING 127.000.000.001.41663-127.000.000.033.00024: MAIL FROM:<test(a)test.com> SIZE=25 127.000.000.001.41663-127.000.000.033.00024: 127.000.000.033.00024-127.000.000.001.41663: 501 5.5.4 Unsupported options 127.000.000.001.41663-127.000.000.033.00024: QUIT 127.000.000.001.41663-127.000.000.033.00024: 127.000.000.033.00024-127.000.000.001.41663: 221 2.0.0 OK ^Ctcpflow[5411]: terminating *************************************************** after telnet to dovecot LMTP # telnet 127.0.0.33 24 Trying 127.0.0.33... Connected to 127.0.0.33. Escape character is '^]'. 220 mail Dovecot ready. LHLO test.com 250-mail 250-8BITMIME 250-ENHANCEDSTATUSCODES 250 PIPELINING MAIL FROM:<test(a)test.com> 250 2.1.0 OK RCPT TO:<user(a)test.com> 250 2.1.5 OK DATA 354 OK 1234567 qwertyu asdfghj . 250 2.0.0 <user(a)test.com> WVKvFEln1VEuFQAAZU03Dg Saved QUIT 221 2.0.0 OK How can I persuade dovecot to deliver the mail? And one more: telnet to dovecot LMTP # telnet 127.0.0.33 24 .................... MAIL FROM: test(a)test.com 501 5.5.4 Invalid parameters MAIL FROM: <test(a)test.com> 501 5.5.4 Invalid parameters MAIL FROM:<test(a)test.com> 250 2.1.0 OK telnet to dspam LMTP # telnet 192.168.1.34 24 .................... MAIL FROM: test(a)test.com 250 2.1.0 OK .................... # telnet 192.168.1.34 24 .................... MAIL FROM: <test(a)test.com> 250 2.1.0 OK .................... Thank you! Regards, Dmitry

4 3

[Dovecot] Dovecot 2.2.4 - Fatal: master: service(imap): child 44562 killed with signal 11
by Marcin Mirosław 10 Jul '13

10 Jul '13

Hi all! I just upgraded dovecot from 2.2.2 to 2.2.4. Now I can't login to imap, proces imap throws segfault. Here is snip from dovecot.log: 2013-06-25T23:06:47.824321+02:00 meteor dovecot: imap-login: Login: user=<marcin(a)mejor.pl>, method=PLAIN, rip=2001:470:1f0b:1ab3:1bc:3b24:d355:b142, lip=2001:470:1f15:1b61::2, mpid=44562, TLS, session=<PaQ86ADgegAgAQRwHwsaswG8OyTTVbFC> 2013-06-25T23:06:47.827616+02:00 meteor dovecot: imap(marcin(a)mejor.pl) <PaQ86ADgegAgAQRwHwsaswG8OyTTVbFC>: Warning: autocreate plugin is deprecated, use mailbox { auto } setting instead 2013-06-25T23:06:47.830425+02:00 meteor dovecot: imap(marcin(a)mejor.pl) <PaQ86ADgegAgAQRwHwsaswG8OyTTVbFC>: Fatal: master: service(imap): child 44562 killed with signal 11 (core dumped) Here is bt created using gdb: Reading symbols from /usr/libexec/dovecot/imap...Reading symbols from /usr/lib64/debug/usr/libexec/dovecot/imap.debug...done. done. [New LWP 17730] [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". Core was generated by `dovecot/imap'. Program terminated with signal 11, Segmentation fault. #0 imapc_storage_try_get_root_sep (storage=0x0, sep_r=0x3f7bad9bbd7 "") at imapc-storage.c:229 229 i_assert(storage->list != NULL); (gdb) Thread 1 (Thread 0x38656679700 (LWP 17730)): #0 imapc_storage_try_get_root_sep (storage=0x0, sep_r=0x3f7bad9bbd7 "") at imapc-storage.c:229 #1 0x00000386567b8b05 in imapc_list_get_hierarchy_sep (_list=<optimized out>) at imapc-list.c:196 #2 0x00000386567b8fff in imapc_list_get_fs_name (list=0xdba28f030, name=0x0) at imapc-list.c:282 #3 0x00000386567b9291 in imapc_list_get_path (_list=<optimized out>, name=0x0, type=MAILBOX_LIST_PATH_TYPE_MAILBOX, path_r=0x3f7bad9bcc8) at imapc-list.c:323 #4 0x00000386567db675 in mailbox_list_get_root_path (list=<optimized out>, type=<optimized out>, path_r=0x3f7bad9bcc8) at mailbox-list.c:1258 #5 0x0000038655c75d15 in quota_add_user_namespace (quota=0xdba288e80, ns=0xdba28eee0) at quota.c:704 #6 0x0000038655c7d0ea in quota_mailbox_list_created (list=0xdba292480) at quota-storage.c:590 #7 0x00000386567d64d2 in hook_mailbox_list_created (list=0xdba292480) at mail-storage-hooks.c:319 #8 0x00000386567da297 in mailbox_list_create (driver=<optimized out>, ns=0xdba28eee0, set=0x3f7bad9be20, flags=<optimized out>, list_r=0xdba28f228, error_r=0x3f7bad9be80) at mailbox-list.c:206 #9 0x00000386567b8f63 in imapc_list_get_fs (list=0xdba28f030) at imapc-list.c:265 #10 0x00000386567b927e in imapc_list_get_path (_list=<optimized out>, name=0x0, type=MAILBOX_LIST_PATH_TYPE_MAILBOX, path_r=0x3f7bad9bf18) at imapc-list.c:319 #11 0x00000386567db675 in mailbox_list_get_root_path (list=<optimized out>, type=<optimized out>, path_r=0x3f7bad9bf18) at mailbox-list.c:1258 #12 0x0000038655c75d15 in quota_add_user_namespace (quota=0xdba288e80, ns=0xdba28eee0) at quota.c:704 #13 0x0000038655c7d0ea in quota_mailbox_list_created (list=0xdba28f030) at quota-storage.c:590 #14 0x00000386567d64d2 in hook_mailbox_list_created (list=0xdba28f030) at mail-storage-hooks.c:319 #15 0x00000386567da297 in mailbox_list_create (driver=<optimized out>, ns=0xdba28eee0, set=0x3f7bad9c090, flags=<optimized out>, list_r=0x3f7bad9c0e8, error_r=0x3f7bad9c1a0) at mailbox-list.c:206 #16 0x00000386567d15c1 in mail_storage_create_full (ns=0xdba28eee0, driver=<optimized out>, data=<optimized out>, flags=(unknown: 0), storage_r=0x3f7bad9c150, error_r=0x3f7bad9c1a0) at mail-storage.c:356 #17 0x00000386567d181c in mail_storage_create (ns=<optimized out>, driver=<optimized out>, flags=<optimized out>, error_r=<optimized out>) at mail-storage.c:407 #18 0x00000386567c9b25 in namespace_add (user=0xdba283e90, ns_set=<optimized out>, unexpanded_ns_set=0xdba284668, mail_set=0xdba284f98, ns_p=0xdba28c5b0, error_r=0x3f7bad9c300) at mail-namespace.c:170 #19 0x00000386567caba7 in mail_namespaces_init (user=0xdba283e90, error_r=0x3f7bad9c300) at mail-namespace.c:344 #20 0x00000386567e1acf in mail_storage_service_init_post (error_r=0x3f7bad9c300, mail_user_r=0x3f7bad9c3d0, priv=0x3f7bad9c2d0, user=0xdba272c38, ctx=<optimized out>) at mail-storage-service.c:653 #21 mail_storage_service_next (ctx=<optimized out>, user=0xdba272c38, mail_user_r=0x3f7bad9c3d0) at mail-storage-service.c:1158 #22 0x00000386567e1e35 in mail_storage_service_lookup_next (ctx=0xdba26e4b0, input=<optimized out>, user_r=0x3f7bad9c3c8, mail_user_r=0x3f7bad9c3d0, error_r=0x3f7bad9c430) at mail-storage-service.c:1193 #23 0x0000000db6f824e9 in client_create_from_input (input=0x3f7bad9c440, login_client=0xdba270660, fd_in=12, fd_out=12, input_buf=0x3f7bad9c4b0, error_r=<optimized out>) at main.c:204 #24 0x0000000db6f827f7 in login_client_connected (client=0xdba270660, username=<optimized out>, extra_fields=<optimized out>) at main.c:277 #25 0x00000386566a97e6 in master_login_auth_finish (client=0xdba270660, auth_args=<optimized out>) at master-login.c:209 #26 0x00000386566a9b45 in master_login_auth_callback (auth_args=0xdba264ee8, errormsg=0x0, context=<optimized out>) at master-login.c:377 #27 0x00000386566aa558 in master_login_auth_input_user (args=<optimized out>, auth=<optimized out>) at master-login-auth.c:243 #28 master_login_auth_input (auth=0xdba26fa10) at master-login-auth.c:363 #29 0x0000038656704cf6 in io_loop_call_io (io=0xdba2709f0) at ioloop.c:387 #30 0x0000038656705f0f in io_loop_handler_run (ioloop=<optimized out>) at ioloop-epoll.c:215 #31 0x00000386567046f0 in io_loop_run (ioloop=0xdba26d2b0) at ioloop.c:406 #32 0x00000386566ac017 in master_service_run (service=0xdba26d140, callback=<optimized out>) at master-service.c:560 #33 0x0000000db6f82ebc in main (argc=1, argv=0xdba26cf20) at main.c:400 (gdb) quit doveconf -n: # 2.2.4: /etc/dovecot/dovecot.conf # OS: Linux 3.9.6-hardened x86_64 Gentoo Base System release 2.2 auth_cache_size = 1 k auth_mechanisms = login digest-md5 cram-md5 plain deliver_log_format = msgid=%m: from=%f: phys=%p: virt=%w %$ dict { quota = pgsql:/etc/dovecot/dovecot-dict-sql.conf.ext } first_valid_uid = 8 last_valid_uid = 8 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes mail_attachment_dir = /dane/domeny/zalaczniki mail_attachment_min_size = 10000 k mail_cache_min_mail_count = 20 mail_gid = mail mail_log_prefix = "%s(%u) <%{session}>: " mail_plugins = autocreate quota notify mail_log stats zlib mail_privileged_group = mail mail_uid = mail maildir_stat_dirs = yes managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mdbox_preallocate_space = yes mdbox_rotate_interval = 60 days mdbox_rotate_size = 50 M namespace inbox { inbox = yes list = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = . subscriptions = yes } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { autocreate = Trash autocreate2 = Spam autocreate3 = Sent autocreate4 = Drafts autosubscribe = Trash autosubscribe2 = Spam autosubscribe3 = Sent autosubscribe4 = Drafts quota = dict:User quota::proxy::quota sieve = ~/.dovecot.sieve sieve_dir = ~/sieve stats_command_min_time = 1 mins stats_domain_min_time = 12 hours stats_ip_min_time = 12 hours stats_memory_limit = 1M stats_refresh = 30 s stats_session_min_time = 15 mins stats_track_cmds = yes stats_user_min_time = 1 hours zlib_save = gz } postmaster_address = postmaster(a)mejor.pl protocols = imap pop3 sieve service auth { unix_listener auth-userdb { group = mail mode = 0660 user = root } } service dict { unix_listener dict { user = mail } } service stats { fifo_listener stats-mail { mode = 0600 user = mail } } ssl_cert = </etc/ssl/gwiazdka.mejor.pl.pem ssl_key = </etc/ssl/gwiazdka.mejor.pl.pem userdb { driver = prefetch } userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } verbose_proctitle = yes protocol lda { mail_plugins = autocreate quota notify mail_log stats zlib sieve } protocol imap { mail_max_userip_connections = 25 mail_plugins = autocreate quota notify mail_log stats zlib imap_quota imap_stats imap_zlib } I'm also using namespaces and imapc defined in database (as settings per user). Thanks, Marcin

3 6

[Dovecot] Dovecot SLOW in imaptest without any apparent reason
by FABIO FERRARI 10 Jul '13

10 Jul '13

Hello, I'm migrating a mail server from a centos 5 cluster architecture to a centos 6 cluster architecture. The new cluster involves faster machines then the old cluster, and a virtual machine. I use dovecot-2.0.9-5.el6.x86_64, while the old cluster uses dovecot-2.0.1-1_118.el5. Tha mail server uses mysql for the users database, and a local ldap for authentication. The storage is also much faster in the new cluster: OLD SERVER: date; dd if=/dev/zero of=/cl/prova.bin bs=102400 count=10240; sync; date Wed Jun 26 15:43:53 CEST 2013 10240+0 records in 10240+0 records out 1048576000 bytes (1.0 GB) copied, 30.0202 seconds, 34.9 MB/s Wed Jun 26 15:44:28 CEST 2013 --> 1GB / 35 secs = about 29.25 MB/sec NEW SERVER: date; dd if=/dev/zero of=/cl/prova.bin bs=102400 count=102400; sync; date mar 25 giu 2013, 15.46.36, CEST 102400+0 records in 102400+0 records out 10485760000 bytes (10 GB) copied, 62,5143 s, 168 MB/s mar 25 giu 2013, 15.48.33, CEST [root@eta ~]# ---> 10GB / 117secs = about 85.47MB/sec An 'ls -l' in the user direcotry is also much faster, when the ldap/sssd cache is populated: OLD SERVER: real 0m8.540s user 0m1.229s sys 0m0.699s NEW SERER: real 0m3.938s user 0m0.250s sys 0m0.151s But my imaptest is much slower: ./imaptest user=XXXXXXX pass=XXXXXXX secs=120 seed=123 mbox=./dovecot-crlf OLD SERVER: Totals: Logi List Stat Sele Fetc Fet2 Stor Dele Expu Appe Logo 100% 50% 50% 100% 100% 100% 50% 100% 100% 100% 100% 30% 5% 1122 559 547 1121 1121 1568 136 900 1121 1121 2244 NEW SERVER Totals: Logi List Stat Sele Fetc Fet2 Stor Dele Expu Appe Logo 100% 50% 50% 100% 100% 100% 50% 100% 100% 100% 100% 30% 5% 390 210 185 389 389 589 49 320 389 389 780 The configuration is exactly the same in the 2 clusters, that is: ----------- # 2.0.1: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-348.3.1.el5 x86_64 Red Hat Enterprise Linux Server release 5.9 (Tikanga) xfs auth_cache_size = 1024 auth_cache_ttl = 21600 s auth_debug = yes auth_debug_passwords = yes auth_master_user_separator = * auth_mechanisms = plain login auth_socket_path = /var/run/dovecot/auth-userdb auth_verbose = yes base_dir = /var/run/dovecot/ disable_plaintext_auth = no hostname = mail.unimore.it info_log_path = /var/log/dovecot.log lda_mailbox_autocreate = yes log_path = /var/log/dovecot.log mail_debug = yes mail_location = maildir:/cl/mail/vhosts/sms.unimo.it/%Ln/Maildir mail_plugins = $mail_plugins quota mailbox_idle_check_interval = 60 s mbox_write_locks = fcntl namespace { inbox = yes location = prefix = INBOX. separator = . type = private } passdb { args = /usr/local/etc/dovecot.masterusers driver = passwd-file master = yes } passdb { args = dovecot driver = pam } plugin { quota = maildir:User quota quota_exceeded_message = Quota exceeded (mailbox is full) quota_rule = *:storage=200MB quota_rule2 = *:messages=100000 quota_rule3 = INBOX.Trash:storage=+100M quota_warning = storage=90%% quota-warning 90 %u quota_warning2 = storage=85%% quota-warning 85 %u quota_warning3 = messages=95%% quota-warning 95 %u quota_warning4 = messages=80%% quota-warning 80 %u setting_name = quota } postmaster_address = postmaster(a)unimore.it quota_full_tempfail = yes service anvil { client_limit = 199999 process_limit = 1 } service auth { client_limit = 21224 unix_listener auth-userdb { mode = 0600 user = vmail } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 } process_limit = 10000 } service imap { process_limit = 10000 } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 } } service pop3 { process_limit = 1024 } service quota-warning { executable = script /usr/local/bin/quota-warning.sh unix_listener quota-warning { group = vmail user = vmail } user = dovecot } ssl_ca = </etc/pki/tls/certs/ca_unimore_tcs.pem ssl_cert = </etc/pki/tls/certs/mailposta1.pem ssl_key = </etc/pki/tls/certs/mailposta1.key userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } verbose_ssl = yes protocol lda { mail_plugins = $mail_plugins quota } protocol imap { mail_plugins = $mail_plugins } protocol pop3 { mail_plugins = $mail_plugins quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } ----------- Is anyone able to tell me what I have to check? thanks in advance Fabio Ferrari

2 1

[Dovecot] Strange Problems when deleting folders.
by Davide Bozzelli 10 Jul '13

10 Jul '13

Hi I'm experiencing a strange problem on my dovecot 2.0.21 setup. When i delete a folder "foo" it was correctly moved in the trash folder. If i try to delete from it the folder "foo" from the trash it gets renamed "foo1". If I try to dlete "foo1" it gets renamed foo11, and the operation could be continued figured out in an endless loop. This happens both from thunderbird and sogo (a webmail). Is it a known bug or a misconfiguration ? Thx in advance

2 1

[Dovecot] Migrating domain using IMAPc
by Breno Moreira 10 Jul '13

10 Jul '13

Hi list, I'm trying to do a domain migration using the imapc feature, but i'm having some problems and I really don't know what is happening. So if you guys could help me with a path to solve this, I will be glad. I'm using Dovecot 2.1.7 in a Debian Wheezy machine. The command I'm using is: dsync -Dv -o imapc_features=rfc822.size -o imapc_host=IP -o imapc_port=143 -o imapc_username='breno.moreira(a)mav.com.br' -o imapc_password='pass' -u breno.moreira(a)mav.com.br mirror imapc:/tmp/dsync-imapc and what I got with the logs is: doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib20_zlib_plugin.so doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules/doveadm doveadm(root): Debug: Skipping module doveadm_acl_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_acl_plugin.so: undefined symbol: acl_user_module (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_expire_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_expire_plugin.so: undefined symbol: expire_set_deinit (this is usually intentio nal, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_quota_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_quota_plugin.so: undefined symbol: quota_user_module (this is usually intentiona l, so just ignore this message) doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_zlib_plugin.so doveadm(root): Debug: Skipping module doveadm_fts_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib20_doveadm_fts_plugin.so: undefined symbol: fts_backend_rescan (this is usually intentional, so just ignore this message) doveadm(breno.moreira(a)mav.com.br): Debug: Added userdb setting: mail=sdbox:~/:ALT=/srv/dovehdodd/dovecot/mav.com.br/breno.moreira doveadm(breno.moreira(a)mav.com.br): Debug: Effective uid=5000, gid=5000, home=/srv/dovessdodd/dovecot/mav.com.br/breno.moreira doveadm(breno.moreira(a)mav.com.br): Debug: Namespace : type=private, prefix=INBOX., sep=., inbox=yes, hidden=no, list=yes, subscriptions=yes location=sdbox:~/:ALT=/srv/dovehdodd/dovecot/mav.com.br/breno.moreira doveadm(breno.moreira(a)mav.com.br): Debug: fs: root=/srv/dovessdodd/dovecot/ mav.com.br/breno.moreira, index=, control=, inbox=, alt=/srv/dovehdodd/dovecot/mav.com.br/breno.moreira dsync(breno.moreira(a)mav.com.br): Debug: Effective uid=5000, gid=5000, home=/srv/dovessdodd/dovecot/mav.com.br/breno.moreira dsync(breno.moreira(a)mav.com.br): Debug: Namespace : type=private, prefix=INBOX., sep=., inbox=yes, hidden=no, list=yes, subscriptions=yes location=imapc:/tmp/dsync-imapc dsync(breno.moreira(a)mav.com.br): Debug: imapc: root=/tmp/dsync-imapc, index=, control=, inbox=, alt= dsync(breno.moreira(a)mav.com.br): Debug: maildir++: root=/tmp/dsync-imapc, index=, control=, inbox=, alt= dsync(breno.moreira(a)mav.com.br): Debug: imapc(187.115.200.155:143): Looking up IP address dsync(breno.moreira(a)mav.com.br): Debug: imapc(187.115.200.155:143): Connecting to 187.115.200.155:143 dsync(breno.moreira(a)mav.com.br): Debug: imapc(187.115.200.155:143): Server capabilities: IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE STARTTLS AUTH=PLAIN AUTH=LOGIN dsync(breno.moreira(a)mav.com.br): Debug: imapc(187.115.200.155:143): Authenticating as breno.moreira(a)mav.com.br dsync(breno.moreira(a)mav.com.br): Debug: imapc(187.115.200.155:143): Server capabilities: IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT I DLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS dsync(breno.moreira(a)mav.com.br): Debug: imapc(187.115.200.155:143): Authenticated successfully dsync(breno.moreira(a)mav.com.br): Debug: Namespace INBOX.: Using permissions from /srv/dovessdodd/dovecot/mav.com.br/breno.moreira: mode=0700 gid=-1 dsync(breno.moreira(a)mav.com.br): Debug: Namespace INBOX.: Using permissions from /tmp/dsync-imapc: mode=0755 gid=-1 dsync(breno.moreira(a)mav.com.br): Error: Can't create mailbox INBOX: Empty mailbox name. dsync(breno.moreira(a)mav.com.br): Info: INBOX: only in dest (guid=c92f64f79f0d1ed01e6d5b314f04886c) dsync(breno.moreira(a)mav.com.br): Info: INBOX: only in source (guid=f4c6a715e8b1d551112d000042e5307d) dsync(breno.moreira(a)mav.com.br): Error: Mailbox INBOX changed its GUID (c92f64f79f0d1ed01e6d5b314f04886c -> f4c6a715e8b1d551112d000042e5307d) dsync(breno.moreira(a)mav.com.br): Error: msg iteration failed: Couldn't open mailbox c92f64f79f0d1ed01e6d5b314f04886c dsync(breno.moreira(a)mav.com.br): Error: Mailbox INBOX changed its GUID (c92f64f79f0d1ed01e6d5b314f04886c -> f4c6a715e8b1d551112d000042e5307d) dsync(breno.moreira(a)mav.com.br): Debug: imapc(187.115.200.155:143): Looking up IP address dsync(breno.moreira(a)mav.com.br): Debug: imapc(187.115.200.155:143): Connecting to 187.115.200.155:143 dsync(breno.moreira(a)mav.com.br): Debug: imapc(187.115.200.155:143): Server capabilities: IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE STARTTLS AUTH=PLAIN AUTH=LOGIN dsync(breno.moreira(a)mav.com.br): Debug: imapc(187.115.200.155:143): Authenticating as breno.moreira(a)mav.com.br dsync(breno.moreira(a)mav.com.br): Debug: imapc(187.115.200.155:143): Server capabilities: IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE SORT SORT=DISPLAY THREAD=REFERENCES THREAD=REFS MULTIAPPEND UNSELECT I DLE CHILDREN NAMESPACE UIDPLUS LIST-EXTENDED I18NLEVEL=1 CONDSTORE QRESYNC ESEARCH ESORT SEARCHRES WITHIN CONTEXT=SEARCH LIST-STATUS dsync(breno.moreira(a)mav.com.br): Debug: imapc(187.115.200.155:143): Authenticated successfully dsync(breno.moreira(a)mav.com.br): Panic: file mail-storage.c: line 794 (mailbox_check_mismatching_separators): assertion failed: (vname[0] == ns->prefix[ns->prefix_len-1]) dsync(breno.moreira(a)mav.com.br): Error: Raw backtrace: /usr/lib/dovecot/libdovecot.so.0(+0x4373a) [0x7f21a814b73a] -> /usr/lib/dovecot/libdovecot.so.0(default_fatal_handler+0x2a) [0x7f21a814b7fa] -> /usr/lib/dove cot/libdovecot.so.0(i_fatal+0) [0x7f21a81237e2] -> /usr/lib/dovecot/libdovecot-storage.so.0(+0x7ce8e) [0x7f21a8411e8e] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_open+0x18) [0x7f21a8411ed8] -> /usr/lib/d ovecot/libdovecot-storage.so.0(imapc_mailbox_sync_init+0x95) [0x7f21a83fd235] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailbox_sync_init+0x33) [0x7f21a8410e23] -> /usr/lib/dovecot/libdovecot-storage.so.0(mailb ox_sync+0x27) [0x7f21a8410f47] -> /usr/bin/dsync(+0x2ef11) [0x7f21a8b20f11] -> /usr/bin/dsync(+0x2f03f) [0x7f21a8b2103f] -> /usr/bin/dsync(+0x30ac4) [0x7f21a8b22ac4] -> /usr/bin/dsync(dsync_worker_msg_iter_next+0x34) [0x7f21a8b1ffb4] -> /usr/bin/dsync(+0x292b4) [0x7f21a8b1b2b4] -> /usr/bin/dsync(+0x29352) [0x7f21a8b1b352] -> /usr/bin/dsync(dsync_brain_msg_sync_more+0x450) [0x7f21a8b1b7c0] -> /usr/bin/dsync(dsync_brain_sync+0xc21) [0x7f21a8b1a6c1] -> /usr/bin/dsync(+0x28e01) [0x7f21a8b1ae01] -> /usr/bin/dsync(dsync_brain_sync+0x7b7) [0x7f21a8b1a257] -> /usr/bin/dsync(+0x28c98) [0x7f21a8b1ac98] -> /usr/bin/dsync(dsync_brain_sync+0x7f8) [0x7f21a8b1a298] -> /usr/bin/dsync(dsync_brain_sync_all+0x18) [0x7f21a8b1ae68] -> /usr/bin/dsync(+0x25f76) [0x7f21a8b17f76] -> /usr/bin/dsync(+0x26461) [0x7f21a8b18461] -> /usr/bin/dsync(+0x13486) [0x7f21a8b05486] -> /usr/bin/dsync(+0x13f51) [0x7f21a8b05f51] -> /usr/bin/dsync(doveadm_mail_try_run+0x159) [0x7f21a8b063e9] -> /usr/bin/dsync(main+0x3a1) [0x7f21a8b05031] -> /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xfd) [0x7f21a7d9cead] Aborted Best Regards, -- --------------------------------------------------------------------- Breno Moreira “O êxito na vida não se mede pelo que você conquistou, mas sim pelas dificuldades que superou no caminho.” * Abraham Lincoln*

3 2

[Dovecot] LMTP Proxy
by Cassidy Larson 10 Jul '13

10 Jul '13

Trying to figure out Proxying with LMTP to a few back end storage servers for quota checking before accepting email delivery on the front end nodes. If I connect to the back end server directly via telnet, everything works great. If I use a front-end server to proxy to the back end server, I don't get the same result. Running 2.2.4 on both front and back end servers. Any help would be appreciated. ------ backend dovecot.log: dovecot: lmtp(72274): Error: userdb lookup(user@host*masteruser): Disconnected unexpectedly dovecot: auth: Fatal: master: service(auth): child 72272 killed with signal 11 (core not dumped) ------ front end dovecot.log: dovecot: lmtp(7495): Debug: auth input: user=user(a)host.comnopassword=<hidden> host=<backend_server_ip> destuser= user(a)host.com*masteruser nologin=Y nodelay=Y proxy=Y pass=<hidden> port=2525 ------ front end dovecot.conf: lmtp_proxy = yes protocols = lmtp protocol lmtp { postmaster_address = postmaster(a)mydomain.com mail_plugins = quota passdb { args = /usr/local/etc/dovecot/dovecot-sql.conf driver = sql } } service lmtp { client_limit = 5 executable = lmtp idle_kill = 0 process_limit = 0 process_min_avail = 0 protocol = lmtp service_count = 0 inet_listener lmtp { address = <frontend_server_ip> port = 2525 } } ------ backend dovecot.conf: auth_master_user_separator = * lmtp_rcpt_check_quota = yes passdb { args = /usr/local/etc/dovecot/dovecot-sql.conf driver = sql master = yes } userdb { args = /usr/local/etc/dovecot/dovecot-sql.conf driver = sql } service lmtp { client_limit = 5 executable = lmtp -L idle_kill = 0 process_limit = 0 process_min_avail = 0 protocol = lmtp service_count = 0 inet_listener lmtp { address = <backend_server_ip> port = 2525 } } protocol lmtp { info_log_path = /var/log/dovecot-lmtp.log postmaster_address = postmaster(a)infowest.com mail_plugins = quota }

3 4

[Dovecot] Non-blocking file_dotlock_open() in quota-maildir question
by do1＠yandex.ru 10 Jul '13

10 Jul '13

Hello, Is it safe to change lines in plugins/quota/quota-maildir.c::maildirsize_write() from fd = file_dotlock_open_group(.., DOTLOCK_CREATE_FLAG_NONBLOCK, ..); to fd = file_dotlock_open_group(.., 0, ..); ? Rationale is: exim+cpanel frequently leave stale maldirsize.lock, but when quota plugin try to dotlock maildirsize, it do this with NONBLOCK flag and just once, so first lock fails with EAGAIN and second may never happen. (When last mail is over quota this also prevent user from further receiving any mail because quota remain exceeded, forver. This is annoing problem.) I wonder if it is possible to do easy fix problem by removing NONBLOCK flag, but as I don't understand why this NONBLOCK flag is used in the first place I decided to ask developers in the list for approval. If removing NONBLOCK flag is not possible I will just call file_dotlock_open_group() twice if first one return -1 with EAGAIN. Best regards, Don.

2 1

[Dovecot] Mailbox statistics (sdbox / indexes) (+ wiki2 frontpage notes)
by Jeroen Massar 10 Jul '13

10 Jul '13

Hi, I used to, with a simple script, loop over the filenames in a Maildir, grab the From from the contents of the file and grab the flags (especially "READ" and "REPLIED") from the filename, but after moving to sdbox these flags are hidden in the index file. Is there anyway to get these out of there programmatically without having to resort to using an imap-client or is that the way to go? (I am effectively counting who has sent the most mail to a mailbox and how many of the the messages have been and have not been replied to; thus another answer would be: "I got a stats program for mailboxes") Greets, Jeroen PS: just reverted the wiki2 Frontpage, apparently even bots know who the author of the IMAP protocol is (leading me to believe that that check does not work): http://wiki2.dovecot.org/FrontPage?action=info I could not find a "revert" button thus copied&pasta'd the previous edition in there. PS2: there seems to be a master.wiki2.dovecot.org and a wiki2.dovecot.org; logging in on the one does not log in on the other, and accounts on the one are different from the other, and it seems cookies go missing also somewhere, hence why an IP is logged and not my account (which I used to have, now was missing and thus I recreated, but needed to do that on both boxes)

3 2

[Dovecot] [PATCH] login-common: Add support for ECDH/ECDHE cipher suites
by David Hicks 10 Jul '13

10 Jul '13

# HG changeset patch # User David Hicks <david(a)hicks.id.au> # Date 1373085976 -36000 # Sat Jul 06 14:46:16 2013 +1000 # Node ID ccd83f38e4b484ae18f69ea08631eefcaf6a4a4e # Parent 1fbac590b9d4dc05d81247515477bfe6192c262c login-common: Add support for ECDH/ECDHE cipher suites ECDH temporary key parameter selection must be performed during OpenSSL context initialisation before ECDH and ECDHE cipher suites can be used. OpenSSL >= 1.0.2 automatically handles ECDH temporary key parameter selection. For OpenSSL < 1.0.2 we must manually specify a named elliptic curve that Dovecot will use to generate an ephemeral key pair. By default we try to use the same named curve as that used in the server's private EC key file. If this attempt fails, a fall back curve of NIST P-384 (secp384r1) is used instead. RFC 6460 states that NIST P-384 MUST be used for cipher suites that include AES-256. For cipher suites that include AES-128, RFC 6460 states that NIST P-256 MUST be used. No matter which curve is used as a fall back option, Dovecot will be non-compliant. The reason for selecting NIST P-384 as a fall back curve is to ensure that the non-compliance is in the form of providing too great a level of security for AES-128 cipher suites rather than too little security for AES-256 cipher suites. diff -r 1fbac590b9d4 -r ccd83f38e4b4 src/login-common/ssl-proxy-openssl.c --- a/src/login-common/ssl-proxy-openssl.c Fri Jun 28 19:48:37 2013 +0300 +++ b/src/login-common/ssl-proxy-openssl.c Sat Jul 06 14:46:16 2013 +1000 @@ -119,6 +119,10 @@ const struct master_service_ssl_settings *ssl_set); static void ssl_server_context_deinit(struct ssl_server_context **_ctx); +static void ssl_proxy_ctx_set_crypto_params(SSL_CTX *ssl_ctx, + const struct master_service_ssl_settings *set); +static int ssl_proxy_ctx_get_pkey_ec_curve_name(const struct master_service_ssl_settings *set); + static unsigned int ssl_server_context_hash(const struct ssl_server_context *ctx) { unsigned int i, g, h = 0; @@ -993,11 +997,58 @@ store = SSL_CTX_get_cert_store(ssl_ctx); load_ca(store, set->ssl_ca, load_xnames ? &xnames : NULL); } + ssl_proxy_ctx_set_crypto_params(ssl_ctx, set); SSL_CTX_set_info_callback(ssl_ctx, ssl_info_callback); + return xnames; +} + +static void +ssl_proxy_ctx_set_crypto_params(SSL_CTX *ssl_ctx, + const struct master_service_ssl_settings *set) +{ +#if !defined(OPENSSL_NO_ECDH) && OPENSSL_VERSION_NUMBER >= 0x10000000L && OPENSSL_VERSION_NUMBER < 0x10002000L + EC_KEY *ecdh; + int nid; + const char *curve_name; +#endif if (SSL_CTX_need_tmp_RSA(ssl_ctx)) SSL_CTX_set_tmp_rsa_callback(ssl_ctx, ssl_gen_rsa_key); SSL_CTX_set_tmp_dh_callback(ssl_ctx, ssl_tmp_dh_callback); - return xnames; +#if !defined(OPENSSL_NO_ECDH) + /* In the non-recommended situation where ECDH cipher suites are being + used instead of ECDHE, do not reuse the same ECDH key pair for + different sessions. This option improves forward secrecy. */ + SSL_CTX_set_options(ssl_ctx, SSL_OP_SINGLE_ECDH_USE); +#endif +#if !defined(OPENSSL_NO_ECDH) && OPENSSL_VERSION_NUMBER >= 0x10002000L + /* OpenSSL >= 1.0.2 automatically handles ECDH temporary key parameter + selection. */ + SSL_CTX_set_ecdh_auto(ssl_ctx, 1); +#elif !defined(OPENSSL_NO_ECDH) && OPENSSL_VERSION_NUMBER >= 0x10000000L + /* For OpenSSL < 1.0.2, ECDH temporary key parameter selection must be + performed manually. Attempt to select the same curve as that used + in the server's private EC key file. Otherwise fall back to the + NIST P-384 (secp384r1) curve to be compliant with RFC 6460 when + AES-256 TLS cipher suites are in use. This fall back option does + however make Dovecot non-compliant with RFC 6460 which requires + curve NIST P-256 (prime256v1) be used when AES-128 TLS cipher + suites are in use. At least the non-compliance is in the form of + providing too much security rather than too little. */ + nid = ssl_proxy_ctx_get_pkey_ec_curve_name(set); + ecdh = EC_KEY_new_by_curve_name(nid); + if (ecdh == NULL) { + /* Fall back option */ + nid = NID_secp384r1; + ecdh = EC_KEY_new_by_curve_name(nid); + } + if ((curve_name = OBJ_nid2sn(nid)) != NULL) + i_debug("SSL: elliptic curve %s will be used for ECDH and" + " ECDHE key exchanges", curve_name); + if (ecdh != NULL) { + SSL_CTX_set_tmp_ecdh(ssl_ctx, ecdh); + EC_KEY_free(ecdh); + } +#endif } static void @@ -1084,6 +1135,28 @@ } static int +ssl_proxy_ctx_get_pkey_ec_curve_name(const struct master_service_ssl_settings *set) +{ + int nid = 0; +#if !defined(OPENSSL_NO_ECDH) && OPENSSL_VERSION_NUMBER >= 0x10000000L && OPENSSL_VERSION_NUMBER < 0x10002000L + EVP_PKEY *pkey; + const char *password; + EC_KEY *eckey; + EC_GROUP *ecgrp; + + password = *set->ssl_key_password != '\0' ? set->ssl_key_password : + getenv(MASTER_SSL_KEY_PASSWORD_ENV); + pkey = ssl_proxy_load_key(set->ssl_key, password); + if (pkey != NULL && + (eckey = EVP_PKEY_get1_EC_KEY(pkey)) != NULL && + (ecgrp = EC_KEY_get0_group(eckey)) != NULL) + nid = EC_GROUP_get_curve_name(ecgrp); + EVP_PKEY_free(pkey); +#endif + return nid; +} + +static int ssl_proxy_ctx_use_certificate_chain(SSL_CTX *ctx, const char *cert) { /* mostly just copy&pasted from SSL_CTX_use_certificate_chain_file() */ @@ -1209,7 +1282,6 @@ #endif ssl_proxy_ctx_use_key(ctx->ctx, ssl_set); - SSL_CTX_set_info_callback(ctx->ctx, ssl_info_callback); if (ctx->verify_client_cert) ssl_proxy_ctx_verify_client(ctx->ctx, xnames);

2 1

[Dovecot] dovecot.index disappeared
by Metro Domain Admin 10 Jul '13

10 Jul '13

Hello, One of my users just mysteriously lost all files from his inbox. I have "mail_log_events = delete undelete expunge copy mailbox_delete mailbox_rename" but couldn't find any evidence of accidental file or folder deletion. I logged in to find that ~user/mdbox/mailboxes/INBOX/dbox-Mails/dovecot.index and its backup were tiny, only 552 bytes, when the folder had thousands of messages. Other folders were left intact. We are running 2.1.15 (mdbox) on Ubuntu 12.10 using ext4. The system was rebooted about 10 days before and the full INBOX was definitely seen since the reboot. I'm just looking for ideas about what might have happened. Thanks, Tony

2 1

[Dovecot] Right way to share some global mailboxes
by Dieter Knopf 09 Jul '13

09 Jul '13

Hello, i'm using Dovecot since a long time but now I need to share folders for global mail adresses like info@ and support@ between all users. What is the right way to share this mailboxes between many users (everyone with own read flag). My config for location is: mail_location = maildir:/home/vmail/%d/%n:INDEX=/home/vmail-indexes/%d/%n And now i have a folder like /home/vmail/bar.com/foo for sharing... Thanks!

3 3

Re: [Dovecot] Anyone know dovecot?
by Reindl Harald 09 Jul '13

09 Jul '13

Am 09.07.2013 13:52, schrieb Tom Horsley: > I keep getting this sort of garbage cluttering my logs: > > dovecot: master: Warning: /ada/denmark is no longer mounted. See http://wiki2.dovecot.org/Mountpoints: 1 Time(s) > > I have indeed seen the wiki page mentioned, and even > tried what it says, but nothing seems to "stick". > Any time a filesystem gets mounted, I apparently > also have to invoke doveadm yet again to make > it ignore the new dadgum filesystem. (The wildcards > mentioned in that web page seem only to apply to > existing filesystems, not new mounts). > > Is there a way to just make it stop forever? no, i asked on the dovecot list why this happens since dovecot 2.0 and upstream believes it is a good idea to assume that every random mounted FS could be relevant for email because it *may* be referred in a config-include instead throw only a fatal error if this is the case and something can not be accessed

1 0

[Dovecot] (no subject)
by Dotan Cohen 08 Jul '13

08 Jul '13

On an Ubuntu Server 12.04 system with Dovecot 2.0.19 I am having some trouble with the Dovecot passwords. I am finding this in the logs when I unsuccessfully try to log in: Jul 07 08:13:25 auth-worker: Debug: pam(user(a)someDomain.com,212. 179.241.14): lookup service=dovecot Jul 07 08:13:25 auth-worker: Debug: pam(user(a)someDomain.com,212.179.241.14): #1/1 style=1 msg=Password: Jul 07 08:13:27 auth-worker: Info: pam(user(a)someDomain.com,212.179.241.14): pam_authenticate() failed: Authentication failure (password mismatch?) (given password: 12345) Jul 07 08:13:29 auth: Debug: client out: FAIL 2 user=user(a)someDomain.com Jul 07 08:13:29 pop3-login: Info: Disconnected (auth failed, 2 attempts): user=<user(a)someDomain.com>, method=PLAIN, rip=212.179.241.14, lip=10.138.11.251 This is not the real password, but an example to show that I think that there is an issue: $ /usr/bin/doveadm pw -u user(a)someDomain.com -s DIGEST-MD5 Enter new password: # Here I have typed "12345" Retype new password: # Here I have typed "12345" {DIGEST-MD5}f4e442b0dec5009eaa8b9b4104923edc $ printf "12345" | md5sum 827ccb0eea8a706c4c34a16891f84e7b - $ Shouldn't that password match the md5sum check? Also, might I have the file formats wrong? $ cat passwd user@someDomain.com::5000:5000::/var/mail/vhosts/someDomain.com/user $ cat shadow user@someDomain.com:{DIGEST-MD5}f4e442b0dec5009eaa8b9b4104923edc $ Note that testing in Telnet fails the password as well, both when specifying the user without a domain and with a domain: $ telnet mail.someDomain.com 143 Trying x.x.x.x... Connected to mail.someDomain.com. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready. a login user 12345 a NO [AUTHENTICATIONFAILED] Authentication failed. e logout * BYE Logging out e OK Logout completed. Connection closed by foreign host. $ telnet mail.someDomain.com 143 Trying x.x.x.x... Connected to mail.someDomain.com. Escape character is '^]'. * OK [CAPABILITY IMAP4rev1 LITERAL+ SASL-IR LOGIN-REFERRALS ID ENABLE IDLE AUTH=PLAIN] Dovecot ready. a login user(a)someDomain.com 12345 a NO [AUTHENTICATIONFAILED] Authentication failed. * BAD Error in IMAP command received by server. e logout * BYE Logging out e OK Logout completed. Connection closed by foreign host. Thanks! -- Dotan Cohen http://gibberish.co.il http://what-is-what.com

2 2

[Dovecot] DOVECOT 2.2.4 = 501 5.5.4 Unsupported options in LMTP
by Dmitry 06 Jul '13

06 Jul '13

Hi, Sorry for my english. My problem: *************************************************** dspam-3.9.0 (dspam-3.10.2 all the time segmentation fault) dspam.conf .................... # DeliveryHost /var/run/dovecot/lmtp # same error as IP DeliveryHost 127.0.0.33 DeliveryPort 24 DeliveryProto LMTP .................... ServerHost 192.168.1.34 ServerPort 24 ServerQueueSize 32 ServerPID /var/run/dspam/dspam.pid *************************************************** dovecot-2.2.4 10-master.conf service lmtp { # Create inet listener only if you can't use the above UNIX socket inet_listener lmtp { # Avoid making LMTP visible for the entire internet address = 127.0.0.33 port = 24 } } quota is not included *************************************************** telnet to dspam LMTP # telnet 192.168.1.34 24 Trying 192.168.1.34... Connected to 192.168.1.34. Escape character is '^]'. 220 DSPAM LMTP 3.9.0 Ready LHLO test.com 250-localhost.localdomain 250-PIPELINING 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 SIZE MAIL FROM:<test(a)test.com> 250 2.1.0 OK RCPT TO:<user(a)test.com> 250 2.1.5 OK DATA 354 Enter mail, end with "." on a line by itself 1234567 qwertyu asdfghj . 530 5.3.0 <user(a)test.com> Fatal: 501 5.5.4 Unsupported options QUIT 221 2.0.0 OK Connection closed by foreign host. *************************************************** at the same time tcpflow LMTP # tcpflow -c -i any host 127.0.0.33 127.000.000.033.00024-127.000.000.001.41663: 220 mail Dovecot ready. 127.000.000.001.41663-127.000.000.033.00024: LHLO localhost 127.000.000.001.41663-127.000.000.033.00024: 127.000.000.033.00024-127.000.000.001.41663: 250-mail 250-8BITMIME 250-ENHANCEDSTATUSCODES 250 PIPELINING 127.000.000.001.41663-127.000.000.033.00024: MAIL FROM:<test(a)test.com> SIZE=25 127.000.000.001.41663-127.000.000.033.00024: 127.000.000.033.00024-127.000.000.001.41663: 501 5.5.4 Unsupported options 127.000.000.001.41663-127.000.000.033.00024: QUIT 127.000.000.001.41663-127.000.000.033.00024: 127.000.000.033.00024-127.000.000.001.41663: 221 2.0.0 OK ^Ctcpflow[5411]: terminating *************************************************** after telnet to dovecot LMTP # telnet 127.0.0.33 24 Trying 127.0.0.33... Connected to 127.0.0.33. Escape character is '^]'. 220 mail Dovecot ready. LHLO test.com 250-mail 250-8BITMIME 250-ENHANCEDSTATUSCODES 250 PIPELINING MAIL FROM:<test(a)test.com> 250 2.1.0 OK RCPT TO:<user(a)test.com> 250 2.1.5 OK DATA 354 OK 1234567 qwertyu asdfghj . 250 2.0.0 <user(a)test.com> WVKvFEln1VEuFQAAZU03Dg Saved QUIT 221 2.0.0 OK How can I persuade dovecot to deliver the mail? And one more: telnet to dovecot LMTP # telnet 127.0.0.33 24 .................... MAIL FROM: test(a)test.com 501 5.5.4 Invalid parameters MAIL FROM: <test(a)test.com> 501 5.5.4 Invalid parameters MAIL FROM:<test(a)test.com> 250 2.1.0 OK telnet to dspam LMTP # telnet 192.168.1.34 24 .................... MAIL FROM: test(a)test.com 250 2.1.0 OK .................... # telnet 192.168.1.34 24 .................... MAIL FROM: <test(a)test.com> 250 2.1.0 OK .................... Thank you! Regards, Dmitry

2 1

[Dovecot] popup to all users ?
by Frank Bonnet 05 Jul '13

05 Jul '13

Hello I need to have a information popup will be send when my thunderbird's users connect to our server. Is there a function in Dovecot to do so ? Thank you

7 7

[Dovecot] IMAP Cannot Delete (Mailbox Doesn't exist)
by gw1500se 05 Jul '13

05 Jul '13

I am now at the next layer of the onion. I am able to retrieve mail but I cannot delete mail from my inbox. My reader says the server is responding with "mailbox does not exist." Any ideas? TIA. -- View this message in context: http://dovecot.2317879.n4.nabble.com/IMAP-Cannot-Delete-Mailbox-Doesn-t-exi… Sent from the Dovecot mailing list archive at Nabble.com.

3 5

[Dovecot] CaCert certificate configuration help needed
by gw1500se 04 Jul '13

04 Jul '13

I was not able to find specific help for configuring the crt file for CaCert. I gleaned from examples the following order: server certificate CaCert class 3 certificate Cacert root certificate However, when I try to configure my mail reading for IMAP, Dovecot shows the following error in the log: dovecot: imap-login: Aborted login (no auth attempts): I am assuming, based on searches for this error, that my crt file is not correct but I don't know what to do at this point. Can someone steer me in the right direction? TIA. -- View this message in context: http://dovecot.2317879.n4.nabble.com/CaCert-certificate-configuration-help-… Sent from the Dovecot mailing list archive at Nabble.com.

3 7