- dovecot - dovecot.org

[Dovecot] Different Mechanism for POP3
by Tim Smith 18 Nov '12

18 Nov '12

Just wondered if there was a way of making the PLAIN an authentication method for POP3S transactions only without making this an option for IMAP? I am attempting to connect to a POP3S server through the GMail interface available through "Accounts and Import". The issue is that there does not seem to be an option to specify the type of mechanism within their interface so I think I have to offer PLAIN along with SSL. Has anyone else had any experience of using the GMail import settings? -- Tim Smith Tel: 01423 564 078 Mob: 07984 398 299 Email: info(a)titan21.co.uk Web: www.titan21.co.uk

3 2

[Dovecot] couple questions about dovecot
by Raan Young 18 Nov '12

18 Nov '12

I am attempting to migrate an ancient IMAP server to Dovecot 2.0.9 running on CentOS 6.3, while trying to minimize the impact on users. Most are using Outlook. I have everything working, but have run into a couple of problems, neither horrible, but both weird. It started when I noticed Outlook shows the .subscriptions file in the folder listing. I figured out a way to prevent that (see below), but then decided to attempt the same tactic to move the .imap index structure out of the folder tree and ran into an interesting side-effect. The .subscriptions issue would seem to be a bug, since the documentation I found implies Dovecot should be hiding it from list requests - as it does for the .imap index structure. I made a workaround by using the below mail_location setting. This puts the .subscriptions file above the imap folder structure and hence outside the list scope. mail_location = mbox:~/imap:INBOX=~/mbox:CONTROL=~:INDEX=~/.imap You'll note I have also moved the .imap index. This works, but the full path to the index files has extra layers of .imap. For example, if a folder tree of imap/A/B/C/D exists, where D is the actual mbox format message file, then the index files are stored in .imap/A/B/C/.imap/D. Don't know if this is a bug or I'm misunderstanding something. Can you provide any insight or better solutions for either issue? Some clients are also using iPhones and/or roundcubemail for web access. Those do not have the .subscriptions issue. Raan

1 0

[Dovecot] dovecot: lda(root): Fatal: Invalid user settings. Refer to server log for more information.
by Thufir 17 Nov '12

17 Nov '12

I ran dovecot -a and the blizzard of data seemed ok to my limited knowledge. Is there another log I should look into to trace this error down? Dovecot and system info: thufir@dur:~$ thufir@dur:~$ dovecot --version 2.0.19 thufir@dur:~$ thufir@dur:~$ cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.1 LTS" thufir@dur:~$ testing postfix & dovecot (http://packages.ubuntu.com/precise/dovecot-postfix) root@dur:/etc/postfix# root@dur:/etc/postfix# telnet localhost 25 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 dur.bounceme.net ESMTP Postfix (Ubuntu) helo me 250 dur.bounceme.net mail from:foo@bar.com 250 2.1.0 Ok rcpt to:root@dur.bounceme.net 250 2.1.5 Ok data 354 End data with <CR><LF>.<CR><LF> subject:ping 3 blah blah . 250 2.0.0 Ok: queued as 35EC92A0D72 quit 221 2.0.0 Bye Connection closed by foreign host. root@dur:/etc/postfix# root@dur:/etc/postfix# tail /var/log/mail.log Nov 16 12:30:07 dur postfix/smtpd[4113]: connect from localhost[127.0.0.1] Nov 16 12:30:40 dur postfix/smtpd[4113]: 35EC92A0D72: client=localhost[127.0.0.1] Nov 16 12:30:52 dur postfix/cleanup[4133]: 35EC92A0D72: message-id=<20121116203040.35EC92A0D72(a)dur.bounceme.net> Nov 16 12:30:52 dur postfix/qmgr[1681]: 35EC92A0D72: from=<foo(a)bar.com>, size=321, nrcpt=1 (queue active) Nov 16 12:30:52 dur dovecot: lda(root): Error: chdir(/root/) failed: Permission denied (euid=65534(nobody) egid=65534(nogroup) missing +x perm: /root, dir owned by 0:0 mode=0700) Nov 16 12:30:52 dur dovecot: lda(root): Error: chdir(/root) failed: Permission denied Nov 16 12:30:52 dur dovecot: lda(root): Error: user root: Initialization failed: Initializing mail storage from mail_location setting failed: stat(/root/Maildir) failed: Permission denied (euid=65534(nobody) egid=65534(nogroup) missing +x perm: /root, dir owned by 0:0 mode=0700) Nov 16 12:30:52 dur dovecot: lda(root): Fatal: Invalid user settings. Refer to server log for more information. Nov 16 12:30:52 dur postfix/local[4134]: 35EC92A0D72: to=<root(a)dur.bounceme.net>, relay=local, delay=25, delays=25/0.02/0/0.12, dsn=4.3.0, status=deferred (temporary failure) Nov 16 12:30:56 dur postfix/smtpd[4113]: disconnect from localhost[127.0.0.1] root@dur:/etc/postfix# thanks, Thufir

3 6

[Dovecot] Change errors to spanish
by Yago Alonso - Ityd 15 Nov '12

15 Nov '12

Hello, i have dovecot version 1.2.17 and i need to translate all the errors that my users receive when a mail fails to send. Were and how should i change it? Thanks a lot! -- Yago Alonso

2 1

[Dovecot] emails are not displayed
by Daniel Fischer 15 Nov '12

15 Nov '12

Hello, i have a problem with some public folders in my testing environment. But after the series, here is my konfiguraion: doveconf -n # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-3-amd64 x86_64 Debian wheezy/sid hostname = ......................................... lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes listen = * mail_debug = no mail_gid = 5000 mail_location = maildir:~:INDEX=/var/mail/indexes/%d/%n mail_plugins = acl mail_privileged_group = vmail mail_uid = 5000 managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { list = children location = maildir:/var/mail/vhosts/%d/public:INDEX=/var/mail/indexes/%d/public:CONTROL=/var/mail/controls/%d/public prefix = Public. separator = . subscriptions = no type = public } namespace inbox { hidden = no inbox = yes list = yes location = prefix = separator = . subscriptions = yes type = private } passdb { args = scheme=CRAM-MD5 username_format=%u /var/mail/vhosts/auth.d/%d/shadow driver = passwd-file } plugin { acl = vfile antispam_allow_append_to_spam = no antispam_backend = pipe antispam_pipe_program = /usr/local/bin/sa-learn-pipe.sh antispam_pipe_program_notspam_arg = --ham antispam_pipe_program_spam_arg = --spam antispam_pipe_tmpdir = /tmp antispam_spam = Spam antispam_trash = Trash sieve = /var/mail/vhosts/sieve/users/%d/%n/.dovecot.sieve sieve_before = /var/mail/vhosts/sieve/%d/before sieve_dir = /var/mail/vhosts/sieve/users/%d/%n sieve_global_dir = /var/mail/vhosts/sieve/%d/global sieve_user_log = /var/mail/vhosts/sieve/users/%d/%n/.dovecot.sieve.log } postmaster_address = postmaster@..... protocols = " imap lmtp sieve pop3" service auth { unix_listener /var/spool/postfix/private/auth { mode = 0666 } unix_listener auth-userdb { mode = 0660 user = vmail } } service managesieve-login { inet_listener sieve { port = 4190 } } ssl_cert = </etc/ssl/private/................................. ssl_key = </etc/ssl/private/......................... userdb { args = username_format=%u /var/mail/vhosts/auth.d/%d/passwd driver = passwd-file } protocol lmtp { mail_plugins = acl sieve } protocol lda { log_path = /var/log/sieve.log mail_plugins = acl sieve } protocol imap { imap_idle_notify_interval = 24 mins mail_plugins = acl imap_acl antispam } protocol sieve { managesieve_implementation_string = Dovecot Pigeonhole managesieve_logout_format = bytes=%i/%o } the problem is that any, not all public folder appear empty. if I delete the index files, I see the emails again for a while(1-2 hours) until they're gone again sometime. The directories change their content not for weeks. It is a test environment. but in one of the folders are more than 13000 mails (the Faxbox). Currently 3 of 13 folders are affected. I thought that it may be due to the size, but it is not the largest folders. For normal mail boxes I have not observed this effect. a3 EXAMINE Public.faxe * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS ()] Read-only mailbox. * 0 EXISTS * 0 RECENT * OK [UIDVALIDITY 1349419566] UIDs valid * OK [UIDNEXT 141737] Predicted next UID * OK [HIGHESTMODSEQ 5] Highest Delete indexes.... /var/mail/indexes/........../public# rm -r .faxe/ a3 EXAMINE Public.faxe * OK [CLOSED] Previous mailbox closed. * FLAGS (\Answered \Flagged \Deleted \Seen \Draft) * OK [PERMANENTFLAGS ()] Read-only mailbox. * 13778 EXISTS * 0 RECENT * OK [UIDVALIDITY 1349419566] UIDs valid * OK [UIDNEXT 141737] Predicted next UID * OK [NOMODSEQ] No permanent modsequences i would like to show you log files but i didn't see any error message. Does Have anyone an idea? Thanks for comment... Daniel

1 0

[Dovecot] auth attempts errors
by burak gürer 15 Nov '12

15 Nov '12

i have install 2.1.1 and configured in dovecot log this error is coming every 20 seconds: dovecot: imap-login: Disconnected (no auth attempts in 0 secs): rip=**********, lip=**********, TLS handshaking: SSL_accept() syscall failed: Connection reset by peer and this error every 2 seconds: dovecot: imap-login: Disconnected (no auth attempts in 0 secs): rip=**********, lip=********** what can be the problem? thanks..

3 7

[Dovecot] multiple users to same e-mail account with ldap authentication
by Marco Gatti 14 Nov '12

14 Nov '12

Hi, I was looking for a particular case of dovecot configuration I cannot find anywhere. Is there a way dovecot can authenticate via ldap different windows 2008 AD users that have access to the same e-mail account (like user authorization in ms exchange)? For example I want to extend AD schema to let users have 10 email accounts (with multiple domain support). If they are private accounts I think there is no problem at all. But if I want two or more users to access the same mail account what happens? Can I do it with dovecot? Or should I create AD groups and add members to that, to let user access the same mail account? Cheers -- Marco

4 9

Re: [Dovecot] IPhone wont delete IMAP messages from dovecot mailbox
by tibby＠tibby.hu 14 Nov '12

14 Nov '12

Hello! I've got dovecot running with postfix. Have virtual users under vmail folder. When I connect with outlook, I can read, delete messages. When I sign on with webmail, also can delete messages, Mutt is working as well on the mail server, can delete messages. Once the message is deleted it moves to the trash. Works as it supposed to. But on Iphone, when I add a mail user, got the mailbox synced with IMAP I can see the INBOX, but when I delete a message, get this error: "Unable to Move Message The message could not be moved to the mailbox Trash." http://www.netchimp.co.uk/webdesign/wp-content/uploads/2011/12/iphone_unabl… What causing this problem? Please Help.

6 9

[Dovecot] Dovecot 2.1.10
by Ralf Zimmermann 14 Nov '12

14 Nov '12

Hi all, I've a problem with dovecot-2.1.10. At time we use dovecot-1.2 without zlib. We setup a new server with dovecot 2.1.10. After syncing the emails everything looks fine. But if we use zlib plugin all new emails have no content. There are a lot of "Error: Maildir filename has wrong S value" log entrys. So we have compiled dovecot-2.0.18 and we use exactly the same configuration. Everything works. What can be our problem with version 2.1.10? Greets Ralf

3 4

[Dovecot] dovecot lost mail! Cause?
by Lukas Haase 14 Nov '12

14 Nov '12

Hi, After using dovecot for several years now, today happend something which makes me really feel unconfortable: An email received was just not delivered properly, or, is lost! The mail (from an external server) was sent to two local mailboxes, user1 and user2. user1 received the message but for user2, it *magically* disappeared. MTA is exim4 which definitely processed the messages and handed over to dovecot deliver: 2012-11-12 07:28:21 1TXnVG-00053I-GD SA: [...] id=8644593.887351352701 685934.JavaMail 2012-11-12 07:28:21 1TXnVG-00053I-GD => user1 <user1(a)example.com> R=dovecot T=dovecot_pipe 2012-11-12 07:28:21 1TXnVG-00053I-GD => user2 <user2(a)example.com> R=dovecot T=dovecot_pipe 2012-11-12 07:28:21 1TXnVG-00053I-GD Completed Also, the log of dovecot tells that the mail should have been stored: Nov 12 07:28:21 mail dovecot: deliver(user1): sieve: msgid=<8644593.887351352701685934.JavaMail>: stored mail into mailbox 'INBOX' Nov 12 07:28:21 mail dovecot: deliver(user2): sieve: msgid=<8644593.887351352701685934.JavaMail.orbitz>: stored mail into mailbox 'INBOX' user1 received the mail but user2 not. Since user2 is myself, I *know* that I did not accidently delete any mail or something like that. It was just never received! Disk space is 3GB left, so enough. So I grepped the whole Maildir of user2 for the message ID. There is only one match in the dovecot.index.cache and within that, the most important data of the mail (Message ID, Date, Sender, Receiver, Subject) appears. But apart from that, not a single file! Is there hope to ever find out why what was going wrong here? It feels me veeeeeeeeery unconfortable because from now on I can never be sure any more that all my mails are really received :( :( However, as I said, my mail system processed maybe millions of messages the past 8 years. Although, I can not be sure if that was the case ... :( And help greatly appreciated! Luke PS: Dovecot version 1.2.15 (Debian 6.0.6) with Maildir backend on local harddrive. No NFS, nothing which can go wrong ... PPS: Original log files, just named replaced for privacy.

4 5

[Dovecot] Dovecot newbie (migrating from qmail)
by Ajai Khattri 13 Nov '12

13 Nov '12

Ive been using qmail+vpopmail+courier-imap for many years but its time to retire that server so I thought this might be an opportunity to see how I could use Postfix and Dovecot to provide the same services. Im running Dovecot 2.1.9 and Postfix 2.9.4. I have spent a few days reading through some of the docs on the wiki (there's doesn't seem to be any large overview of Dovecot concepts or books so bear with me). Im thinking something simple like passwd-file setup would suffice for me. I want to use completely virtual users. Id like to store mail under /home/vmail/$domain/$user. I think Ive figured out how to do that. But how do I create the maildir? I understand the need to have a mail directory but also a directory for things like sieve - how to specify that? Im thinking the structure would be something like: /home/vmail/$domain/$user/mail <-- mail stored here /home/vmail/$domain/$user/ <-- sieve and other sundry store here Or should the sieve stuff also be under its own folder alongside the maildir? Is it possible to have a separate passwd file per domain? It is possible to combine password and userdb files into one per domain? (I prefer to keep all files related to each domain in its own folder). Also would like to configure Postfix to use dovecot-sasl and I want to use dovecot-lmtp for deliveries. Any good docs / example on those? Later on, I think I want to integrate some kind of virus and spam filtering (amavisd and maybe dspam - anybody used those? would I configure Postfix to handle that or dovecot-lmtp?) Im sure Ill have more questions as I get more complicated but baby steps for now. -- Aj.

3 5

[Dovecot] Problem importing messages with lazy_expunged configured
by Angel L. Mateo 13 Nov '12

13 Nov '12

Hello, I have a problem importing messages since I have configured lazy_expunge. My lazy_expunge configuration (that is correctly working when a message is expunged) is: plugin { lazy_expunge = BORRADOS. } namespace { hidden = yes list = no location = maildir:~/Maildir/expunged prefix = BORRADOS. separator = . } but when I try to import messages I get: amateo_adm@myotis31:~$ sudo doveadm -vD import -u angel.luis maildir:/tmp/angel.luis '' mailbox INBOX doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib02_lazy_expunge_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib10_quota_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/lib20_zlib_plugin.so doveadm(root): Debug: Loading modules from directory: /usr/lib/dovecot/modules/doveadm doveadm(root): Debug: Skipping module doveadm_acl_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_acl_plugin.so: undefined symbol: acl_user_module (this is usually intentional, so just ignore this message) doveadm(root): Debug: Skipping module doveadm_expire_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_expire_plugin.so: undefined symbol: expire_set_deinit (this is usually intentional, so just ignore this message) doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_quota_plugin.so doveadm(root): Debug: Module loaded: /usr/lib/dovecot/modules/doveadm/lib10_doveadm_zlib_plugin.so doveadm(root): Debug: Skipping module doveadm_fts_plugin, because dlopen() failed: /usr/lib/dovecot/modules/doveadm/lib20_doveadm_fts_plugin.so: undefined symbol: fts_backend_rescan (this is usually intentional, so just ignore this message) doveadm(root): Debug: Effective uid=0, gid=0, home=/home/amateo_adm doveadm(root): Debug: Quota root: name=User quota backend=dict args=:file:/home/amateo_adm/Maildir/dovecot.quota doveadm(root): Debug: Quota rule: root=User quota mailbox=* bytes=10737418240 messages=0 doveadm(root): Debug: Quota rule: root=User quota mailbox=Trash bytes=+1073741824 messages=0 doveadm(root): Debug: dict quota: user=doveadm, uri=file:/home/amateo_adm/Maildir/dovecot.quota, noenforcing=0 doveadm(root): Debug: maildir++: root=/tmp/angel.luis, index=, control=, inbox=/tmp/angel.luis, alt= doveadm(root): Fatal: lazy_expunge: Unknown namespace: 'BORRADOS.' in /tmp/<user> I don't have any "expunged" folder, it is just a maildir. In order to use it I have to deactivate this plugin in the running command with something like "sudo doveadm -vD -o mail_plugins='quota zlib' import -u <user> maildir:/tmp/<user> '' mailbox INBOX". Any idea? -- Angel L. Mateo Martínez Sección de Telemática Área de Tecnologías de la Información y las Comunicaciones Aplicadas (ATICA) http://www.um.es/atica Tfo: 868889150 Fax: 868888337

1 0

[Dovecot] older gcc don't know --as-needed
by Andreas Schulze 13 Nov '12

13 Nov '12

Hi, I have to build dovecot-2.1.10 for SuSE SLES9. /bin/sh ../../libtool --tag=CC --mode=link gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -no-undefined -Wl,--as-needed -o test-lib test_lib-test-lib.o test_lib-test-array.o test_lib-test-aqueue.o test_lib-test-base64.o test_lib-test-bsearch-insert-pos.o test_lib-test-buffer.o test_lib-test-crc32.o test_lib-test-hash-format.o test_lib-test-hex-binary.o test_lib-test-istream-base64-encoder.o test_lib-test-istream-concat.o test_lib-test-istream-crlf.o test_lib-test-istream-seekable.o test_lib-test-istream-tee.o test_lib-test-llist.o test_lib-test-mempool-alloconly.o test_lib-test-network.o test_lib-test-ostream-file.o test_lib-test-primes.o test_lib-test-priorityq.o test_lib-test-seq-range-array.o test_lib-test-strescape.o test_lib-test-strfuncs.o test_lib-test-str-find.o test_lib-test-str-sanitize.o test_lib-test-time-util.o test_lib-test-utc-mktime.o test_lib-test-var-expand.o ../lib-test/libtest.la liblib.la -lrt libtool: link: gcc -std=gnu99 -g -O2 -Wall -W -Wmissing-prototypes -Wmissing-declarations -Wpointer-arith -Wchar-subscripts -Wformat=2 -Wbad-function-cast -fno-builtin-strftime -Wl,--as-needed -o test-lib test_lib-test-lib.o test_lib-test-array.o test_lib-test-aqueue.o test_lib-test-base64.o test_lib-test-bsearch-insert-pos.o test_lib-test-buffer.o test_lib-test-crc32.o test_lib-test-hash-format.o test_lib-test-hex-binary.o test_lib-test-istream-base64-encoder.o test_lib-test-istream-concat.o test_lib-test-istream-crlf.o test_lib-test-istream-seekable.o test_lib-test-istream-tee.o test_lib-test-llist.o test_lib-test-mempool-alloconly.o test_lib-test-network.o test_lib-test-ostream-file.o test_lib-test-primes.o test_lib-test-priorityq.o test_lib-test-seq-range-array.o test_lib-test-strescape.o test_lib-test-strfuncs.o test_lib-test-str-find.o test_lib-test-str-sanitize.o test_lib-test-time-util.o test_lib-test-utc-mktime.o test_lib-test-var-expand.o ../lib-test/.libs/libtest.a ./.libs/liblib.a -lrt /usr/lib/gcc-lib/i586-suse-linux/3.3.3/../../../../i586-suse-linux/bin/ld: unrecognized option '--as-needed' /usr/lib/gcc-lib/i586-suse-linux/3.3.3/../../../../i586-suse-linux/bin/ld: use the --help option for usage information gcc version is 3.3.3 Is there a special option to disable ithe ld option or do I have to apply a special patch? Are there other suggestions? Thanks -- Andreas Schulze Internetdienste | P252 DATEV eG 90329 Nürnberg | Telefon +49 911 319-0 | Telefax +49 911 319-3196 E-Mail info @datev.de | Internet www.datev.de Sitz: 90429 Nürnberg, Paumgartnerstr. 6-14 | Registergericht Nürnberg, GenReg Nr.70 Vorstand Prof. Dieter Kempf (Vorsitzender) Dipl.-Kfm. Wolfgang Stegmann (stellvertretender Vorsitzender) Dipl.-Kfm. Michael Leistenschneider Dipl.-Kfm. Dr. Robert Mayr Jörg Rabe v. Pappenheim Dipl.-Vw. Eckhard Schwarzer Vorsitzender des Aufsichtsrates: Reinhard Verholen

1 0

[Dovecot] Commercial features in Dovecot future: Object storage, archive
by Timo Sirainen 13 Nov '12

13 Nov '12

Hi all, Dovecot Oy’s web pages at www.dovecot.fi have been updated. The products page lists two features that will be available for commercial licensing, extending the functionality of the basic open-source version of Dovecot. * Storing emails to (high-latency) object storage, initially supporting Amazon S3, Caringo CAStor and Scality. * Email archive storage. See http://www.dovecot.fi/products/index.html for details. I’ve been developing Dovecot for over 10 years now. For a long time it was my primary motivation in life to create the best IMAP server available :) I think I've pretty much accomplished that by now. The future is looking very bright for Dovecot: we will continue the open source development stronger than ever, but in addition, for the long term it needs some additional licensed components that bring the money to cover the cost for future Dovecot development and to be able to build up the support in a professional way. These new features will be added as plugins on top of Dovecot to extend the functionality. Note that I’m not just randomly choosing which features will be open and which will be licensed. Only some specific features will be licensed where my company is going to make money with partnerships and in other measurable ways.

5 6

[Dovecot] mbox vs. maildir storage block waste
by Christoph Anton Mitterer 13 Nov '12

13 Nov '12

Hi. I recently mentioned in several posts, that I'd tended to use mbox rather than maildir, because you don't loose so much space (due to always allocating full blocks per maildir file and thus per mail). I made some tests of my archive, which consists of some 3,4 million mails at a total of 42GB). Most of these mails are probably normal sized, but there are also some with bigger attachments. For those who are interested here are the results: I used a 53687091200 B image file (via loop device) and tested ext4 only. btrfs is IMHO not yet ready, I have had often issues with XFS (corruptions), reiser4 is more or less dead and reiser3 is said to have issues (see e.g. its wikipedia article, even though it has that mode for small files which would fit nicely). As you see the number of mails increased a bit, cause I tested over several days... but this is only a very small increase so it shouldn't change the numbers a lot. 1) Original mbox archives (right now in Evolution) mbox exact space: 38122676224 (does not include meta-data) mbox guess space: 44625670144 (includes Evolution meta-data which is several GBs) mbox num mails: 3412999 (occurances of From_ lines) In the following: - image file, 1B-blocks, Used_begin, Used_end, Available_begin, Available_end result out of df -B 1 - mdir exact used space is the sum of du -B 1 for each regular file (i.e. each mdir file) - mdir guess used space du -B 1 on the root dir of the filesystem - mdir num mails: find . type -f | wc -l on the root dir of the filesystem 2) EXT4 with 4096 blocks: image file: 53687091200 1B-blocks: 52844687360 Used_begin: 188555264 Used_end: 45198778368 Available_begin: 49971777536 Available_end: 2444972032 mdir exact used space: 44810866688 mdir guess used space: 45010243584 mdir num mails: 3423296 delta: 6.688190464 G delta / mail: 1953 B 3) EXT4 with 2048 blocks: image file: 53687091200 1B-blocks: 50324295680 Used_begin: 82857984 Used_end: 41598846976 Available_begin: 47557083136 Available_end: 6041094144 mdir exact used space: 41323991040 mdir guess used space: 41516007424 mdir num mails: 3425033 delta: 3.201314816 G delta / mail: 934 B 4) EXT4 with 1024 blocks: image file: 53687091200 1B-blocks: 50314834944 Used_begin: 38287360 Used_end: 39909360640 Available_begin: 47592193024 Available_end: 7721119744 mdir exact used space: 39683908608 mdir guess used space: 39871086592 mdir num mails: 3425033 delta: 1.561232384 G delta / mail: 455 B As you can see, the delta per mail is rather close to the statistically expected values of 2048B, 1024B and 512B. In the end I probably changed my opinion. ~7GB of wasted block space for all my mails is actually quite a lot, but in days of cheap disk space it's acceptable. And with mbox one has IMHO the major disadvantage that mailservers (including dovecot) store some meta-data _in_ it (i.e. in the mails themselves) , which I don't like a lot. I still think about reports that mbox is much faster with full text search (which sounds reasonable)... but therefore one needs probably and database backend anyway. HTH, Chris.

7 21

[Dovecot] Invalid Managesieve commands are counted twice
by Christoph Bußenius 12 Nov '12

12 Nov '12

Hi, the Managesieve server closes the connection if it receives an unknown command before authentication: "IMPLEMENTATION" "Dovecot Pigeonhole" "SIEVE" "fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave" "NOTIFY" "mailto" "SASL" "PLAIN" "STARTTLS" "VERSION" "1.0" OK "Dovecot ready." --> BOGUS NO "Error in MANAGESIEVE command received by server." NO "Error in MANAGESIEVE command received by server." BYE "Too many invalid MANAGESIEVE commands." Connection closed by foreign host. Note that only one bogus command has been sent by the client, however the server sends two identical error messages. This seems to be a bug in Pigeonhole 0.3.3. In version 0.2.6, the connection was kept open after the error message. This is actually important to us because we use the "sieveshell" utility which is shipped with the Python "managesieve" package. The managesieve.py module always sends a BOGUS command after the TLS handshake. According to its comments, this is done to work around problems with other server implementations: # Some servers send capabilities after TLS handshake, some # do not. We send a bogus command, and expect a NO. If you # get something else instead, read the extra NO to clear # the buffer. typ, data = self._command('BOGUS') (The full source is at http://pydoc.net/managesieve/0.4.2/managesieve) As a result, sieveshell cannot be used with TLS and a current Dovecot/Pigeonhole server. Cheers, Christoph -- Christoph Bußenius Rechnerbetriebsgruppe der Fakultäten Informatik und Mathematik Technische Universität München +49 89-289-18519 <> Raum 00.05.040 <> Boltzmannstr. 3 <> Garching

2 2

[Dovecot] Help me with IMAP config
by Tibby 12 Nov '12

12 Nov '12

Hello! I have dovecot running. Imap works fine. When i connect with outlook an when i delete a message it gets crossed out but still stays in my mailbox. I want to disable this feature. I want it once its deleted then go to trash folder on the mail server and thats it. Is there an option for this? I'm running dovecot 1.2.15 Thanks!

2 1

[Dovecot] Sieve users script problem.
by Eliezer Croitoru 12 Nov '12

12 Nov '12

I am using Dovecot 2.1.9 which seems to solve older bug in sieve. Now I have another problem with users scripts. I want dovecot to run users scripts but it seems to not even see them. Dovecot runs the default sieve script from home dir but wont see the sieve scripts in the sieve subdirectory and some logs: Nov 10 18:35:54 lda(user(a)domain.local): Debug: Quota root: name=User quota backend=maildir args= Nov 10 18:35:54 lda(user(a)domain.local): Debug: Quota rule: root=User quota mailbox=* bytes=1073741824 messages=0 Nov 10 18:35:54 lda(user(a)domain.local): Debug: Quota rule: root=User quota mailbox=Trash bytes=+32212254 (3%) messages=0 Nov 10 18:35:54 lda(user(a)domain.local): Debug: Quota warning: bytes=1020054732 (95%) messages=0 reverse=no command=quota-warning 95 raw mail user Nov 10 18:35:54 lda(user(a)domain.local): Debug: Quota warning: bytes=214748364 (20%) messages=0 reverse=no command=quota-warning 20 raw mail user Nov 10 18:35:54 lda(user(a)domain.local): Debug: none: root=, index=, control=, inbox=, alt= Nov 10 18:35:54 lda(user(a)domain.local): Debug: Destination address: eliezer(a)domain.local (source: user@hostname) Nov 10 18:35:54 lda(user(a)domain.local): Debug: sieve: include: sieve_global_dir is not set; it is currently not possible to include `:global' scripts. Nov 10 18:35:54 lda(user(a)domain.local): Debug: sieve: using the following location for user's Sieve script: /home/vmail/domain.local/eliezer/home/.dovecot.sieve Nov 10 18:35:54 lda(user(a)domain.local): Debug: sieve: opening script /home/vmail/domain.local/eliezer/home/.dovecot.sieve Nov 10 18:35:54 lda(user(a)domain.local): Debug: sieve: script binary /home/vmail/domain.local/eliezer/home/.dovecot.svbin successfully loaded Nov 10 18:35:54 lda(user(a)domain.local): Debug: sieve: binary save: not saving binary /home/vmail/domain.local/eliezer/home/.dovecot.svbin, because it is already stored Nov 10 18:35:54 lda(user(a)domain.local): Debug: sieve: executing script from /home/vmail/domain.local/eliezer/home/.dovecot.svbin Nov 10 18:35:54 lda(user(a)domain.local): Info: sieve: msgid=<XXXX@XXXX>: stored mail into mailbox 'INBOX' So it recognizes the home sir but wont look at the sieve sub directory. My dovecot -n output: # 2.1.9: /etc/dovecot/dovecot.conf # OS: Linux 3.3.8-gentoo x86_64 Gentoo Base System release 2.0.3 ext3 auth_mechanisms = plain login dict { quota = mysql:/etc/dovecot/dovecot-dict-sql.conf.ext } disable_plaintext_auth = no first_valid_uid = 5000 last_valid_uid = 5000 log_path = /var/log/dovecot.log mail_debug = yes mail_gid = 5000 mail_location = maildir:/home/vmail/%d/%n/Maildir/ mail_plugins = " quota" mail_privileged_group = vmail mail_uid = 5000 namespace { inbox = yes list = yes location = prefix = separator = . subscriptions = yes type = private } passdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { quota = maildir:User quota quota_rule = *:storage=1G quota_rule2 = Trash:storage=+3%% quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=20%% quota-warning 20 %u sieve = ~/.dovecot.sieve sieve_dir = ~/sieve sieve_extensions = +include +vnd.dovecot.debug +imapflags +spamtest +spamtestplus +relational +comparator-i;ascii-numeric } postmaster_address = postmastert(a)domain.local service auth { unix_listener /var/spool/postfix/private/auth { group = postfix mode = 0660 user = postfix } unix_listener auth-userdb { group = vmail mode = 0600 user = vmail } } service dict { unix_listener dict { group = vmail mode = 0600 user = vmail } } service imap-login { inet_listener imap { port = 143 } inet_listener imaps { port = 993 ssl = yes } } service lmtp { unix_listener /var/spool/postfix/private/dovecot-lmtp { group = postfix mode = 0660 user = postfix } } service pop3-login { inet_listener pop3 { port = 110 } inet_listener pop3s { port = 995 ssl = yes } } service quota-warning { executable = script /etc/dovecot/quota-warning.sh user = vmail } ssl_ca = </etc/ssl/dca.pem ssl_cert = </etc/ssl/ssl.crt ssl_key = </etc/ssl/ssl.key userdb { args = /etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lda { mail_plugins = " quota sieve" } protocol imap { mail_plugins = " quota imap_quota" } protocol pop3 { pop3_client_workarounds = outlook-no-nuls oe-ns-eoh pop3_uidl_format = %08Xu%08Xv } Thanks, Eliezer

2 2

[Dovecot] Solr 4.0 - lucene - FTS
by Charles Marcus 12 Nov '12

12 Nov '12

Hi Timo, As one who is interested in implementing FTS sometime in the future, I'm curious about what is in store as far as improvements go... Specifically, any plans for implementing immediate/automatic index updates at delivery time? The lack of automatically updated indexes is one downside for its implementation... Also, does the release of Solr 4.0 mean anything for the lucene library used by dovecot? http://www.marketwatch.com/story/lucidworks-congratulates-apache-foundation… Thanks, -- Best regards, Charles

3 6

[Dovecot] Sieve puts incoming message into inbox on any problem with submission_host
by Christian Rohmann 12 Nov '12

12 Nov '12

Hello dovecot-users, I have a question/suggestion regarding the submission_host feature of the lda (either via dovecot-lda binary or lmtp) in combination with sieve. When trying to deliver message to a mailbox and this message has a sieve redirect action applied to it, dovecot is using the configured smtp server to forward the message just fine. Unfortunately, if the server configured for submission is unavailable, returns an error or cannot be found via DNS, sieve will simply put the message into the inbox and be done with it: --- dovecot.log --- dovecot: lda(user1): Error: lmtp client: DNS lookup of idonotexist.example.com failed: Name or service not known dovecot: lda(user1): Error: sieve: msgid=unspecified: failed to redirect message to <user2> (refer to server log for more information) dovecot: lda(user1): sieve: msgid=unspecified: stored mail into mailbox 'INBOX' dovecot: lda(user1): Error: sieve: execution of script /mailboxes/user1/.dovecot.sieve failed, but implicit keep was successful (user logfile /mailboxes/user1/.dovecot.sieve.log may reveal additional details) --- /dovecot.log --- The same applies to vacation messages being sent out. Especially with an (unconditional) redirect action, users don't expect to find messages in their inbox. Also problems with the submission_host could very much be temporary and a little delay in delivering a message is better then putting it somewhere the user doesn't expect a message to be. Is there any way to change the behavior of dovecot or the sieve plugin to tempfail in case a message cannot be sent out? I know that with multiple sieve actions it gets more complicated as there could be corner cases were the first message can be sent via the submission server and another message produced by the same sieve script cannot. I'd love sieve to behave like this: a) if submission host is unreachable (hostname wrong, timeout, ...) -> tempfail b) if submission host returns 4xx error -> tempfail c) if submission host returns 5xx error -> fail(-save) and just drop the message into inbox or even have an option to reject the message completely in this case. In case of a tempfail response, the mta simply queues the message and tries again later. In case of a permanent fail the mta will create a bounce message to in form the sender. Regards and have a great weekend, Christian

2 1

Re: [Dovecot] LDA without lookup as non-root?
by E.B. 11 Nov '12

11 Nov '12

Timo, Sorry I didn't see your response until now >> 3) The interesting part -- I am invoking LDA from Maildrop. See: >> http://thread.gmane.org/gmane.mail.imap.dovecot/65473 > So >> when invoked, Maildrop has already dropped to the destination UID/GID >> and the needed paths are available in the environment. However, using >> as many permutations of calling LDA as I can think of (based on >> http://wiki2.dovecot.org/LDA ), I always get this: >> >> (command line usage error. Command output: lda: Fatal: Couldn't lookup >> our username (uid=2500) ) > > Set USER environment. Sorry, would you mind being more specific? If you see my follow-up posts on this thread, I found a source file with this error message in it (link below) and reading that code, there is no way to avoid this error for non-system users (uid's) if you don't use -d. (looking at the "destination" variable) http://hg.dovecot.org/dovecot-sieve-1.1/raw-rev/7d85833eff96

1 0

[Dovecot] doveadm quota get -A via doveadm-proxy director with LDAP
by Ramon Frontera 10 Nov '12

10 Nov '12

Hi, We are running Dovecot 2.1.10 I want configure dovecot to do execute doveadm commands on the proxy server. We have 1 proxy with director and 2 mail servers. we use LDAP when I try to do doveadm quota get -u user it works fine. The problem is when I try to do doveadm quota get -A ON PROXY I have this result: doveadm(first_user): Error: Proxy is missing destination host doveadm: Error: Failed to iterate through some users Username Quota name Type Value Limit % in 10-auth.conf I have "!include auth-ldap.conf.ext" in auth-ldap.conf.ext I hve: passdb { driver = ldap args = /etc/dovecot/dovecot-ldap.conf.ext } userdb { driver = ldap args = /etc/dovecot/dovecot-ldap.conf.ext } and In dovecot-ldap.conf.ext I have: uris = ldap://ldap:port dn = xxxxx dnpass = yyyyy auth_bind = no ldap_version = 3 base =base scope = subtree user_attrs = attributes user_filter = (mail=%u) pass_attrs = userPassword=password,uid=user=%L$,cn=proxy,=starttls=any-cert pass_filter = (mail=%u) iterate_attrs = uid=user iterate_filter = (uid=*) I don't know where is my error!!! Thanks in advance -- ------------------------------------------ Ramon Frontera Gallardo Universitat de les Illes Balears

3 2

[Dovecot] quota recalc does not work
by Adrian Stoica 09 Nov '12

09 Nov '12

Hi I upgraded dovecot from 2.0 to 2.1 , and now i face the quota recalc problem. All settings are keep in mysql Before , after a change in mailbox.quota field, i run doveadm quota recalc and all was ok , but now that command doesn't do anything. After i change a quota for a user , i have to restart dovecot to get the new quota , or do a "doveadm reload" instead of recalc. And the doveadm quota recalc -A" give me back a lot of "doveadm(username): Info: User no longer exists, skipping" Any thoughts ? # 2.1.10: /usr/dovecot21/etc/dovecot/dovecot.conf # OS: Linux 2.6.35.4 i686 auth_cache_negative_ttl = 1 secs auth_cache_size = 2 M auth_failure_delay = 4 secs auth_mechanisms = plain login digest-md5 cram-md5 auth_worker_max_count = 100 base_dir = /var/run/dovecot/ default_client_limit = 4096 default_internal_user = vmail default_login_user = nobody default_process_limit = 256 deliver_log_format = mail delivery from=%f subject=%s msgid=%m: %$ dict { acl = mysql:/usr/dovecot21/etc/dovecot/dovecot-dict-sql.conf.ext } disable_plaintext_auth = no first_valid_uid = 1 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes listen = * mail_location = maildir:~/Maildir mail_plugins = " quota acl trash notify mail_log" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave namespace { hidden = no list = children location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u prefix = shared/%%u/ separator = / subscriptions = no type = shared } namespace inbox { inbox = yes list = yes location = mailbox Drafts { special_use = \Drafts } mailbox Junk { special_use = \Junk } mailbox Sent { special_use = \Sent } mailbox "Sent Messages" { special_use = \Sent } mailbox Trash { special_use = \Trash } prefix = separator = / subscriptions = yes type = private } passdb { args = /usr/dovecot21/etc/dovecot/dovecot-sql.conf.ext driver = sql } plugin { acl = vfile acl_shared_dict = proxy::acl autocreate = Trash autocreate2 = Drafts autocreate3 = Sent autosubscribe = Trash autosubscribe2 = Drafts autosubscribe3 = INBOX autosubscribe4 = Sent mail_log_events = delete mailbox_delete mailbox_rename mail_log_fields = box subject from msgid size quota = maildir:User quota quota_warning = storage=95%% quota-warning 95 %u quota_warning2 = storage=95%% quota-warning 90 %u quota_warning3 = storage=85%% quota-warning 85 %u sieve = ~/.dovecot.sieve sieve_dir = ~/sieve trash = /usr/dovecot21/etc/dovecot/dovecot-trash.conf.ext } postmaster_address = postmaster(a)dacris.net protocols = imap quota_full_tempfail = yes rejection_subject = Rejected: %s: %r service auth { unix_listener auth-client { mode = 0666 user = vmail } unix_listener auth-userdb { mode = 0666 user = vmail } } service dict { unix_listener dict { user = vmail } } service imap-login { process_min_avail = 4 } service imap-postlogin { executable = script-login /bin/imap.sh unix_listener imap-postlogin { mode = 01232 } } service imap { executable = imap imap-postlogin process_limit = 1024 vsz_limit = 1 G } service quota-warning { executable = script /bin/quota_warning.sh unix_listener quota-warning { user = vmail } user = vmail } ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = /usr/dovecot21/etc/dovecot/dovecot-sql.conf.ext driver = sql } protocol lda { mail_plugins = " quota acl trash notify mail_log sieve autocreate" } protocol imap { imap_client_workarounds = delay-newmail mail_max_userip_connections = 20 mail_plugins = " quota acl trash notify mail_log imap_quota imap_acl" } dovecot-sql.conf.ext: password_query = SELECT password FROM mailbox WHERE \ username = '%Ln' AND domain = '%Ld' AND \ active = '1' user_query = SELECT CONCAT('/srv/vmail/',mailbox.domain,'/%Ln') AS 'home' ,'98' AS 'uid', '98' AS 'gid' , \ CONCAT('*:storage=', mailbox.quota,'M') AS quota_rule ,"Trash:storage=+50M" AS quota_rule2 FROM mailbox WHERE \ mailbox.username = '%Ln' AND mailbox.domain = '%Ld' AND \ mailbox.active = '1' iterate_query = SELECT username AS user , domain FROM mailbox WHERE active = '1'

1 0

[Dovecot] Mails don't get deleted after POP3
by cullinan＠rocketmail.com 09 Nov '12

09 Nov '12

Hi, there! Well, I am new to dovecot, so please be patient with me: I have a virtual server and want to setup simple mail delivery. postfix, saslauthd and dovecot basically work fine. The only open issue is, that (I guess) dovecot doesn't remove the mail when it's retrieved via pop3 from the server. It keeps sending me the same emails again and again. (The mail client (Thunderbird) is configured to remove the messages from the server - it was working already.) I guess that dovecot cannot write to some files / has problems with write permissions. But it doesn't tell me anything... Can you tell me, what configuration might be wrong or how can I enable more debugging to see what dovecot is doing after the mails got sent out via pop3? Here is the configuration: # dovecot -n # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.38-8-server x86_64 Ubuntu 11.04 log_timestamp: %Y-%m-%d %H:%M:%S protocols: pop3 pop3s login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/pop3-login mail_privileged_group: mail mbox_write_locks: fcntl dotlock mail_executable: /usr/lib/dovecot/pop3 mail_plugin_dir: /usr/lib/dovecot/modules/pop3 auth default: passdb: driver: pam userdb: driver: passwd -----8<----- # dovecot -a # 1.2.15: /etc/dovecot/dovecot.conf # OS: Linux 2.6.38-8-server x86_64 Ubuntu 11.04 base_dir: /var/run/dovecot log_path: info_log_path: log_timestamp: %Y-%m-%d %H:%M:%S syslog_facility: mail protocols: pop3 pop3s listen: * ssl_listen: ssl: yes ssl_ca_file: ssl_cert_file: /etc/ssl/certs/dovecot.pem ssl_key_file: /etc/ssl/private/dovecot.pem ssl_key_password: ssl_parameters_regenerate: 168 ssl_cipher_list: ssl_cert_username_field: commonName ssl_verify_client_cert: no disable_plaintext_auth: yes verbose_ssl: no shutdown_clients: yes nfs_check: yes version_ignore: no login_dir: /var/run/dovecot/login login_executable: /usr/lib/dovecot/pop3-login login_user: dovecot login_greeting: Dovecot ready. login_log_format_elements: user=<%u> method=%m rip=%r lip=%l %c login_log_format: %$: %s login_process_per_connection: yes login_chroot: yes login_trusted_networks: login_process_size: 64 login_processes_count: 3 login_max_processes_count: 128 login_max_connections: 256 valid_chroot_dirs: mail_chroot: max_mail_processes: 512 mail_max_userip_connections: 10 verbose_proctitle: no first_valid_uid: 500 last_valid_uid: 0 first_valid_gid: 1 last_valid_gid: 0 mail_access_groups: mail_privileged_group: mail mail_uid: mail_gid: mail_location: mail_cache_fields: mail_never_cache_fields: imap.envelope mail_cache_min_mail_count: 0 mailbox_idle_check_interval: 30 mail_debug: no mail_full_filesystem_access: no mail_max_keyword_length: 50 mail_save_crlf: no mmap_disable: no dotlock_use_excl: yes fsync_disable: no mail_nfs_storage: no mail_nfs_index: no mailbox_list_index_disable: yes lock_method: fcntl maildir_stat_dirs: no maildir_copy_with_hardlinks: yes maildir_copy_preserve_filename: no maildir_very_dirty_syncs: no mbox_read_locks: fcntl mbox_write_locks: fcntl dotlock mbox_lock_timeout: 300 mbox_dotlock_change_timeout: 120 mbox_min_index_size: 0 mbox_dirty_syncs: yes mbox_very_dirty_syncs: no mbox_lazy_writes: yes dbox_rotate_size: 2048 dbox_rotate_min_size: 16 dbox_rotate_days: 1 mail_drop_priv_before_exec: no mail_executable: /usr/lib/dovecot/pop3 mail_process_size: 256 mail_plugins: mail_plugin_dir: /usr/lib/dovecot/modules/pop3 mail_log_prefix: %Us(%u): mail_log_max_lines_per_sec: 10 imap_max_line_length: 65536 imap_capability: imap_client_workarounds: imap_logout_format: bytes=%i/%o imap_id_send: imap_id_log: imap_idle_notify_interval: 120 pop3_no_flag_updates: no pop3_enable_last: no pop3_reuse_xuidl: no pop3_save_uidl: no pop3_lock_session: no pop3_uidl_format: %08Xu%08Xv pop3_client_workarounds: pop3_logout_format: top=%t/%p, retr=%r/%b, del=%d/%m, size=%s dict_db_config: dict_process_count: 1 managesieve_max_line_length: 65536 managesieve_logout_format: bytes=%i/%o managesieve_implementation_string: dovecot auth default: mechanisms: plain realms: default_realm: cache_size: 0 cache_ttl: 3600 cache_negative_ttl: 3600 executable: /usr/lib/dovecot/dovecot-auth user: root chroot: username_chars: abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ username_translation: username_format: master_user_separator: anonymous_username: anonymous krb5_keytab: gssapi_hostname: winbind_helper_path: /usr/bin/ntlm_auth failure_delay: 2 verbose: no debug: no debug_passwords: no ssl_require_client_cert: no ssl_username_from_cert: no use_winbind: no count: 1 worker_max_count: 30 process_size: 256 passdb: driver: pam args: deny: no pass: no master: no userdb: driver: passwd args: -----8<----- Please let me know if you need more. Thank you in advance! Regards, Rob

3 3

[Dovecot] Dovecot ok for port 110, but not for SSL (beginner asking)
by ycc_Swe 09 Nov '12

09 Nov '12

Hello, I just installed Dovecot. It works for plaintext autorization, port 110. It has connected with Telnet, Thunderbird and an on-line pop3 client. Telnet: +OK Dovecot ready. user nnnnn -ERR Unknown command. user nnnnn +OK pass xxxxxxxxxx +OK Logged in. stat +OK 1 1553 retr 1 +OK 1553 octets Return-path: <sssssss(a)hotmail.com> Envelope-to: nnnnnn(a)mydomain.com Delivery-date: Tue, 06 Nov 2012 12:02:28 +0100 Received: from bay0-xcvxcv-xvxcv.bay333.hotmail.com ([123.123.123.123]) by deb7.pc with esmtp (Exim 4.80) But when I try ssl (port 995) with an on-line pop3 client, it will not work: /var/log/mail.log Nov 7 02:46:55 deb7 dovecot: pop3-login: Disconnected (no auth attempts in 0 secs): user=<>, rip=12.12.12.7, lip=123.123.123.123, TLS: Disconnected, session=<Iza75N3NlABBNykH> Nov 7 02:46:56 deb7 dovecot: pop3-login: Disconnected (no auth attempts in 1 secs): user=<>, rip=12.12.12.7, lip=123.123.123.123, TLS: Disconnected, session=<nWTF5N3NlQBBNykH> root@deb7:~# doveconf -n # 2.1.7: /etc/dovecot/dovecot.conf # OS: Linux 3.2.0-3-686-pae i686 disable_plaintext_auth = no mail_gid = mail mail_location = mbox:~/mail:INBOX=/var/mail/%u namespace inbox { inbox = yes location = prefix = } passdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } plugin { sieve = ~/.dovecot.sieve sieve_dir = ~/sieve } protocols = " imap pop3" ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem userdb { args = username_format=%u /etc/dovecot/users driver = passwd-file } I know very little about mail and ssl. I have assumed that ssl will be set up "automatically" when Dovecot is installed. But maybe I have missed something here. Please give me pointers. The following two files contain ssl keys: ssl_cert = </etc/ssl/certs/dovecot.pem ssl_key = </etc/ssl/private/dovecot.pem I have tried changing the ssl parameter ("yes", "required") in 10-ssl.conf but with no change except that port 110 login becomes disabled. As you can see I am a beginner with Dovecot, I hope it is still OK to ask on this mailing list. Thanks. -- View this message in context: http://dovecot.2317879.n4.nabble.com/Dovecot-ok-for-port-110-but-not-for-SS… Sent from the Dovecot mailing list archive at Nabble.com.

3 5