- dovecot - dovecot.org

[Dovecot] Accessing a strange mailbox
by Micah Anderson 07 Nov '11

07 Nov '11

I have a user who has a mailbox called: A----->B It seemed to work in courier fine, they managed to create it, and there are mails in it. However, dovecot is not letting the user access it, the IMAP server gives an error. I tried to rename it but I would also get an error: # doveadm mailbox rename A-----\>B AtoB doveadm(root): Error: Can't rename mailbox A----->B to AtoB: Mailbox doesn't exist: A----->B # doveadm mailbox rename A----->B AtoB doveadm(root): Error: Can't rename mailbox A----- to AtoB: Mailbox doesn't exist: A----- # doveadm mailbox rename 'A----->B' AtoB doveadm(root): Error: Can't rename mailbox A----->B to AtoB: Mailbox doesn't exist: A----->B # doveadm mailbox rename "A----->B" AtoB doveadm(root): Error: Can't rename mailbox A----->B to AtoB: Mailbox doesn't exist: A----->B # How can I deal with this mailbox (using mdbox here)? Thanks! --

3 2

[Dovecot] Problems with password verification on a BSD box against PAM
by Michael Schinhammer 07 Nov '11

07 Nov '11

Spam detection software, running on the system "ns.089.at", has identified this incoming email as possible spam. The original message has been attached to this so you can view it (if it isn't spam) or label similar future email. If you have any questions, see The administrator of that system for details. Content preview: Hi ML, i want to use my local users database on my Freebsd 8.2 box and got the following error in the maillog. The password is ok and it working on the console. i can establish the ssl connection after login "a login ux password" the error occures i cant login. [...] Content analysis details: (6.2 points, 5.0 required) pts rule name description ---- ---------------------- -------------------------------------------------- 0.2 MR_NOT_ATTRIBUTED_IP Beta rule: an non-attributed IPv4 found in headers 0.6 J_CHICKENPOX_65 BODY: 6alpha-pock-5alpha 0.6 J_CHICKENPOX_73 BODY: 7alpha-pock-3alpha 1.3 RDNS_NONE Delivered to internal network by a host with no rDNS 0.0 NO_RDNS2 Sending MTA has no reverse DNS 3.5 TO_NO_BRKTS_DIRECT To: misformatted and direct-to-MX

1 0

[Dovecot] Converting from 1.12 to 2.0 questions about mail location?
by Knute Johnson 06 Nov '11

06 Nov '11

I'm building a new server and using a newer version of ubuntu server that uses Dovecot 2.0. I thought I would like to use Maildir instead of the mbox that was used in the previous server. What do I have to do to convert my mbox mail to Maildir? Or should I just use mbox and copy it over :-)? Thanks, -- Knute Johnson

2 1

[Dovecot] Safely restoring backups
by Micah Anderson 05 Nov '11

05 Nov '11

I'm trying to determine what the best way to restore mail with mdbox is. Restoring using maildir was trivial, I just used rsync --ignore-existing which wrote any mails that were removed and didn't touch things that already existed[1]. With mdbox things have become more complicated, and I haven't found a way to restore mail that doesn't result in many message duplicates. My backup setup is simple, I'm doing daily rsync backups of user's mailstores, as well as weekly backups, so I end up having on my backup server daily.1, daily.2, daily.3, daily.4, weekly.1, weekly.2... each containing the entire contents of the user's mdbox. The different restore methods I've tried are: 1. I tried rsyncing the different backup directories back to the mail storage host, and then doing: 'dsync -R backup -u $user mdbox:/path/to/to/daily.1/mdbox'[2] 'dsync -R backup -u $user mdbox:/path/to/to/daily.2/mdbox' This works ok, but it gives duplicates of every mail that already exists for every daily/weekly I dsync. This is what the rsync --ignore-existing avoided. This is particularly annoying if I restore the weekly, and multiple daily directories, because then you get a copy for every one you restore. I had thought that the individual message's GIDs would keep them from being duplicated? 2. I also tried to use 'doveadm import' in two different ways. The first way I created a 'restored_from_backups' folder and then import each of the daily.#, weekly.# mdboxes into their own subfolder within that folder, for example: 'doveadm import -u $username mdbox:/path/to/daily.1/mdbox restored_from_backups/daily1 all' 'doveadm import -u $username mdbox:/path/to/daily.2/mdbox restored_from_backups/daily2 all' ... etc. I then go through and subscribe the new folders[3] and the user ends up with a folder structure like this: restored_from_backups/ daily.1/ INBOX Trash folder1 folder2 daily.2 INBOX Trash folder1 folder2 etc. This works fine, except that it results in the user having a entire duplicate copies of their mailbox for each daily/weekly that I restore. That will quickly bring people over quota. 3. I also tried to use 'doveadm import' to import all the different directories all into the same restored_from_backups directory, so there are no subdirectories for each daily/weekly under restored_from_backups, like so: 'doveadm mailbox create -u $user -s restored_from_backups' 'doveadm -v -D import -u $user mdbox:/path/to/daily.1/mdbox restored_from_backups all' I then go through and subscribe the folders[3]. Using this method, the 'restored_from_backups' mailbox is created, and populated with the folders. The only problem with this method is the same as method #1: for every backup I restore, mails are duplicated. Is there a way I can restore things from backup and avoid duplicates? Is there another method I should try? thanks for any ideas, pointers, suggestions for improvement, etc. micah 1. this would of course bring back mails that were deleted, but that was fine as the user could deal with that. 2. yes, I know I could setup dsync on the backup server, and use dsync directly to pull the mails from there, but this is complicated in my situation due to how the backupserver works. 3. why doesn't doveadm import have a -s option to subscribe? --

2 1

[Dovecot] Newbie Question/Feature Request
by Michael Papet 05 Nov '11

05 Nov '11

Hi, I'm working on a plugin for qpsmtpd (a perl smtp frontend) that delivers mail via dovecot's LDA. I can only get mail delivered by writing the email to file, then calling 'deliver -d someone -f someone-else < /path/to/temp/email' All good, expected behavior. A perl snippet: local $/=undef; open FH, "< ./demo.mail"; my $stringified = <FH>; # this is roughly equivalent to how other LDA queues work. close FH; open (CMD_OUT, " /usr/lib/dovecot/deliver -f somedude\(a)someplace.com -d anotherdude\(a)destination.dom $stringified |"); my $test = <CMD_OUT>; print $test; The above code errors out because the expected behavior is $stringified is supposed to be a file name. It would be great if deliver could be fed the email as a string so I don't have to add a step of writing to file. Or, maybe there's an undocumented method? Thanks. mpapet

2 1

[Dovecot] dsync with quotas
by Micah Anderson 05 Nov '11

05 Nov '11

I have been working on converting people from courier maildir -> dovecot mdbox and during some of the dsync runs I'm seeing the quota_exceeded_message be printed as an Error: dsync(<user>): Error: Can't save message to mailbox INBOX: You are over quota. To avoid losing mail, immediately empty your Trash and Sent folders and \ delete emails with large attachments. dsync(<user>): Info: INBOX: Couldn't keep all uids^M Its possible the user was over quota on the originating courier side, but I would still like to migrate their mail proprely to mdbox, but it seems like being over quota is inhibiting that. Are the quota calculations including both the maildir files as well as the converted mdbox files, resulting in a double counting? I'm not entirely sure if the messages above indicate that the migration failed for that user or not, so I've been manually increasing their quota, then redoing the dsync mirror until it works properly. I wonder if it would be better if I turned off quota entirely during migration so I don't run into this problem? thanks, micah --

2 2

[Dovecot] Group ACL
by Daniel L. Miller 05 Nov '11

05 Nov '11

Using Dovecot 2.0, LDAP userdb & passdb, with prefetch: hosts = myhost.mydomain dn = cn=x,cn=y dnpass = xyz123 auth_bind = yes auth_bind_userdn = uid=%n,ou=users,dc=x ldap_version = 3 base = ou=Users, dc=x user_attrs = =home=/var/mail/%d/%n, \ =mail=mdbox:/var/mail/%d/%n/mdbox, \ =uid=vmail, \ =gid=mail user_filter = (&(objectClass=inetOrgPerson)(mail=%u)) pass_attrs = mail=user, \ userPassword=password, \ =userdb_home=/var/mail/%d/%n, \ =userdb_mail=mdbox:/var/mail/%d/%n/mdbox, \ =userdb_uid=vmail, \ =userdb_gid=mail, \ =userdb_acl_groups='allshared' pass_filter = (&(objectClass=inetOrgPerson)(mail=%u)) iterate_attrs = mail=user iterate_filter = (&(objectClass=inetOrgPerson)(mail=*)) default_pass_scheme = plain I have added permissions for "$allshared" to a mailbox's Inbox. It does not appear in the shared folders list. Other mailboxes, with explicit permission for a given username, work fine. What am I doing wrong? -- Daniel

2 1

Re: [Dovecot] Dot Lock timestmap, users disconnections from roundcube
by Maria Arrea 05 Nov '11

05 Nov '11

Timo, we are not using NFS, we use remote iSCSI volumes with ext4. Regards Maria ----- Original Message ----- From: Timo Sirainen Sent: 11/04/11 09:59 PM To: Maria Arrea Subject: Re: [Dovecot] Dot Lock timestmap, users disconnections from roundcube On Thu, 2011-11-03 at 10:54 +0100, Maria Arrea wrote: > Hello. > > We are running dovecot 2.0.13 with mdbox+zlib on RHEL 5.7 x64, ext4. We use NTP. Indexes are in a iSCSI raid 10, mailboxes in raid5. No NFS. We have detected that sometimes all users get disconnected from roundcube at the same time. In dovecot logs we hundreds of lines like this: > > Nov 3 09:23:07 buzon dovecot: imap(mcrivero@mydomain): Warning: Created dotlock file's timestamp is different than current time (1320308587 vs 1320308542): /buzones/mydomain/03/67/mcrivero/subscriptions I did several fixes related to this, but they were already in v2.0.10. Note the time difference of 45 seconds. > Nov 3 09:23:07 buzon dovecot: imap(mcrivero@mydomain): Connection closed bytes=0/295 The dotlock warning isn't related to this. My guess: NFS was being extremely slow here, some operation took 45 seconds and Roundcube decided to abort before that. The "timestamp is different" check doesn't work 100% correctly if the filesystem operations take more than a second.

2 1

[Dovecot] Bad creation timestamp of migrated mails (maildir format)?
by Lukas Weiß 05 Nov '11

05 Nov '11

Hello everybody, ive just switched to dovecot imap because dbmail i used before is not developed any further and sql storage is difficult to backup. Ive done that, by setting up dovecot with maildir format and copy mails from old dbmail to new dovecot imap server with my mail client (thunderbird). Unfortunately migrating to dovecot brought me some problems with my Android K9 Mail client: Sync with IMAP-Server shows me only the oldest mails. I think the problem is, that K9 only fetches the newest mails (25) from the server (to save memory etc). Which mail is "new" is probably determined by creation timestamp of the email-files in my mailbox, which was copied newest first on migration from dbmail to dovecot. So the older mails have the newer creation timestamp on file system. Do you have any suggestions how to fix that problem? Maybe migrate to dbox mailbox format? BTW: New mails show up correctly, as the creation timestamp is new. Thanks Lukas

3 6

[Dovecot] fts-lucene vs SEARCH header Re: 2.1: problems compiling fts-lucene - CLucene git version necessary?
by Lutz Preßler 05 Nov '11

05 Nov '11

On Tue, 20 Sep 2011, Lutz Preßler wrote: > On Mo, 19 Sep 2011, Timo Sirainen wrote: > > > On Sun, 2011-09-18 at 13:27 +0200, Lutz Preßler wrote: > > > Hello, > > > On So, 11 Sep 2011, Timo Sirainen wrote: > > > dovecot: imap(...): Error: fts_lucene: default_language set, but Dovecot built without stemmer support > > > > Fixed: http://hg.dovecot.org/dovecot-2.1/rev/02c84406c661 > Without stemmer support it works nicely now though. Next problem :-) side effect: my test setup (some commits ago) with fts = lucene in plugin section (ftps_lucene plugin without stemmer support): SEARCH header is not working (empty result sets, no logging). Tested in different circumstances (and also happening with virtual folders). Simply disable fts option (while module is still loaded) or use fts=sqat to have header search working correctly again. Lutz

2 1

[Dovecot] dovecot: 2011-11-04 16:58:01 Error: IMAP(<user>): FETCH for mailbox Trash UID 42022 got too little data: 90900 vs 1529791
by Noah 05 Nov '11

05 Nov '11

Hi there I keep getting the following errors scrolling in my dovecot logs. I am wondering how I can nail down what is creating that problem. dovecot: 2011-11-04 16:58:01 Error: IMAP(<usr>): FETCH for mailbox Trash UID 42022 got too little data: 90900 vs 1529791 also I have a trash folder with over 100k messages in mbox format. I am wondering if migrating to Maildir format would make it easier and quicker for dovecot to index my mail. I am getting these types of errors from time to time. dovecot: 2011-10-30 20:32:58 Error: IMAP(<user>): Timeout while waiting for lock for transaction log file /home/<user>/mail/.imap/INBOX/dovecot.index.log Cheers, Noah

2 1

[Dovecot] [PATCH] Use SSL_MODE_RELEASE_BUFFERS if available to keep memory usage low
by Cristian Rodríguez 05 Nov '11

05 Nov '11

# HG changeset patch # User Cristian Rodríguez <crrodriguez(a)opensuse.org> # Date 1318533592 10800 # Node ID c15d6befe20082009cb40926afa208ab4b684818 # Parent 962df5d9413a4a0fcc68aacc1df0dca7a44a0240 Use SSL_MODE_RELEASE_BUFFERS if available to keep memory usage low. diff -r 962df5d9413a -r c15d6befe200 src/login-common/ssl-proxy-openssl.c --- a/src/login-common/ssl-proxy-openssl.c Wed Oct 12 17:16:10 2011 +0300 +++ b/src/login-common/ssl-proxy-openssl.c Thu Oct 13 16:19:52 2011 -0300 @@ -925,6 +925,9 @@ STACK_OF(X509_NAME) *xnames = NULL; SSL_CTX_set_options(ssl_ctx, SSL_OP_ALL | SSL_OP_NO_SSLv2); +#ifdef SSL_MODE_RELEASE_BUFFERS + SSL_CTX_set_mode(ssl_ctx, SSL_MODE_RELEASE_BUFFERS); +#endif if (*set->ssl_ca != '\0') { /* set trusted CA certs */ store = SSL_CTX_get_cert_store(ssl_ctx);

2 1

Re: [Dovecot] lmtp performance
by Juan Carlos Sanchez 04 Nov '11

04 Nov '11

A particular reply (not to the list) has told me to try: " Add to service lmtp: process_min_avail = 20 " And yes, it works (unless for me), so I want to share it with everybody. Have not exactly measured performance but this morning have seen over 1400 messages/minute with lmtp under heavy load. What the "process_min_avail = 20" in service lmtp (or anywhere else) exactly imply? cannot find a reference in wiki2 . I suppose it means than 20 lmtp processes are always open waiting for new connections and so reducing startup latency, isn't it? Thank you. > > On Mon, Oct 17, 2011 at 6:06 AM, Juan Carlos Sanchez > <juancarlos.sanchez(a)upm.es <mailto:juancarlos.sanchez@upm.es>> wrote: > > Hello: > > In the process of migration from version 1.2 to 2.0 have tried to > use lmtp instead of lda as delivery agent. > > But unfortunately througput we get is poor with lmtp compared to lda. > In peak times with lda we are able to deliver over 1800 > messages/minute (high I/O but not affecting service) but if we > switch to lmtp cannot deliver more than 300 mess/minute (very low > I/O). > > This is enough for normal work but low under heavy load > (distribution lists messages sometimes stay queued for 4 hours > before deliver). > > We have arround 50000 boxes and use postfix as MTA > > How to increase lmtp performance? > > > dovecot config for lda and lmtp: > > protocol lda { > auth_socket_path = /usr/local/var/run/dovecot/auth-master > info_log_path = /var/log/mail/dovecot_deliver.log > log_path = /var/log/mail/dovecot_deliver.log > mail_plugins = quota sieve zlib > postmaster_address = postmaster(a)upm.es <mailto:postmaster@upm.es> > sendmail_path = /usr/lib/sendmail > } > > protocol lmtp { > info_log_path = /var/log/mail/dovecot_deliver.log > log_path = /var/log/mail/dovecot_deliver.log > mail_plugins = quota sieve zlib > postmaster_address = postmaster(a)upm.es <mailto:postmaster@upm.es> > sendmail_path = /usr/lib/sendmail > } > > In postfix I have: > > mailbox_transport = lmtp:unix:private/dovecot-lmtp > > > > Thanks in advance. > > -- > > ------------------------------------------------------ > Juan Carlos Sanchez Hernandez > Universidad Politecnica de Madrid > ------------------------------------------------------ > > > -- ------------------------------------------------------ Juan Carlos Sanchez Hernandez Universidad Politecnica de Madrid ------------------------------------------------------

3 2

[Dovecot] imap proxy for Gmail
by Jumping Mouse 04 Nov '11

04 Nov '11

Hello, b I have a situation were I want to be able to give teachers access to their Google apps for education email through Squirrelmail. The network that they are on blocks gmail. I am able to get Squirrelmail to communicate with Gmail via imap. I am looking at getting persistant imap connections to improve the user experience. I have looked at IMAPPROXY but this application is not compatible with the gmail imaps (ssl-encrypted imap over port 993). I recall reading somewhere that Dovecot has a built in imapproxy that could be used for this. Can someone please point me to documentation or other information on how I might achieve the above stated goal? Thanks, Kafriki

3 2

[Dovecot] Proxy and Virtual IMAP Folders
by Pedro Paixao 04 Nov '11

04 Nov '11

Hi all I am a newbie to dovecot and I would like some help clarifying a feature to determine if I can use it in my project. Is is posible to use the virtual plugin, in a IMAP proxy configuration, in a way that the virtual plugin searches messages on the real server? Here's my scenario: [Client]----[Dovecot Proxy]-----[Real Imap Server] Client connects to Dovecot Proxy and gets all the folders that are on the Real Imap Server, plus some virtual ones (generated by Dovecot Proxy) that search for messages on the real server. In my config the Dovecot Proxy has no email messages, real folders, or local delivery. I would like to thank you in advance for ant help and support. All the best Pedro

2 1

[Dovecot] doveadm segfaults on TCP connect - version 2.0.15
by ghandidrivesahumvee＠rocketfish.com 04 Nov '11

04 Nov '11

Hi list, I just recently installed Dovecot 2.0.15. Unfortunately, doveadm segfaults when I attempt to connect to the local dovecot instance. When this occurs, my logs show: 2011-10-19T12:31:23-07:00 mail02 dovecot: doveadm: Error: doveadm client not compatible with this server (mixed old and new binaries?) I am using the settings listed on the wiki page http://wiki2.dovecot.org/Director [root@mail02 ~]# /opt/dovecot/bin/doveadm who -a 10.10.5.220:544 Segmentation fault (core dumped) doveconf and gdb output are below. If there is any more information I can provide please let me know. Thanks! [root@mail02 ~]# /opt/dovecot/bin/doveconf -n # 2.0.15: /opt/dovecot-2.0.15/etc/dovecot/dovecot.conf # OS: Linux 2.6.18-194.17.4.el5 x86_64 CentOS release 5.5 (Final) auth_mechanisms = plain login auth_verbose = yes auth_worker_max_count = 60 default_client_limit = 2048 disable_plaintext_auth = no doveadm_proxy_port = 544 lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes listen = 10.10.5.220, 127.0.0.1 lmtp_save_to_detail_mailbox = yes mail_fsync = always mail_log_prefix = "%r mpid=%p %s(%u): " mail_nfs_index = yes mail_nfs_storage = yes mail_plugins = " notify mail_log" managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date ihave mmap_disable = yes passdb { args = /opt/dovecot/etc/dovecot/conf.d/dovecot-sql.conf.ext driver = sql } plugin { mail_log_events = delete expunge mailbox_delete mail_log_fields = msgid box from mail_log_group_events = yes sieve = ~/MainSieve sieve_before = /storage03/sieve/before/ sieve_dir = ~/sieve sieve_max_actions = 32 sieve_max_redirects = 4 sieve_max_script_size = 2M } quota_full_tempfail = yes service anvil { client_limit = 2000 } service auth { client_limit = 7000 unix_listener /var/spool/postfix/private/auth { mode = 0600 user = postfix } unix_listener auth-userdb { group = mailowner mode = 0600 user = mailowner } } service doveadm { inet_listener { port = 544 } } service imap-login { inet_listener imap { port = 143 } process_min_avail = 4 service_count = 0 vsz_limit = 128 M } service imap {%0

5 6

[Dovecot] Rewrite the ostream output method, to save messages in another directory.
by Alex Baule 04 Nov '11

04 Nov '11

Hi Timo, I Trying to integrate my antispam with dovecot, using the imap folder to do certain actions. I Do almost every thing, but i have some problems saving the message. Explaining this function, i try to use a imap folder like a "collector folder", the user append a message from outside (ie another imap or pop message) to this folder, and i don't want to copy this message, i need to redirect it to another folder outside from user's maildir. Well, i try to base it in zlib plugin, with was the o_stream_create_gz(). Inside the o_stream_create_gz has the Output, it's a copy from the original output. I Try to replace this output, with another one, that i try to create to another location, without sucessfull. struct ostream * o_stream_create_X_list(struct ostream *output, struct istream *input, const char *type) { struct emexis_ostream *X_stream; struct ostream *new_output; int fd; fd = open("/tmp/email",O_WRONLY); new_output = o_stream_create_fd_file(fd, 0, TRUE); o_stream_cork(new_output); emexis_stream = i_new(struct emexis_ostream, 1); emexis_stream->ostream.sendv = o_stream_X_sendv; emexis_stream->ostream.flush = o_stream_X_flush; emexis_stream->ostream.iostream.close = o_stream_X_close; emexis_stream->output = new_output; emexis_stream->input = input; o_stream_ref(new_output); return o_stream_create(&X_stream->ostream); } With this new o_stream, i got this error. Oct 27 15:14:24 brc dovecot: imap(alex(a)exemplo.com.br): Error: o_stream_send_istream(/storage/gss/emexis/messages/ exemplo.com.br/alex/Maildir/.Emexis.Ext-Blacklist/tmp/1319735664.M568409P30815.brc) failed: Bad file descriptor Oct 27 15:14:24 brc dovecot: imap(alex(a)exemplo.com.br): Error: o_stream_flush(/storage/gss/emexis/messages/ exemplo.com.br/alex/Maildir/.Emexis.Ext-Blacklist/tmp/1319735664.M568409P30815.brc) failed: Bad file descriptor Oct 27 15:14:24 brc dovecot: imap(alex(a)exemplo.com.br): Error: write(/storage/gss/emexis/messages/ exemplo.com.br/alex/Maildir/.Emexis.Ext-Blacklist/tmp/1319735664.M568409P30815.brc) failed: Bad file descriptor There is something wrong Timo ? Like missing something or i need to rewrite another funcion ? Tks !!!

2 1

[Dovecot] doveadm delete-user ?
by Jan-Frode Myklebust 04 Nov '11

04 Nov '11

IMHO it would be great if we could both provision and un-provision users without having the provisioning system mess with files in the filesystem. Provisioning new users works fine since dovecot will create all files/directories on first login, but I haven´t found the tools to un-provison them. I see "doveadm mailbox delete" can delete individual mailboxes, but what about indexes, sieve-scripts and home-directories? Are there any tools to clean out these ? -jf

2 3

[Dovecot] Restricting IMAP access
by Thierry de Montaudry 04 Nov '11

04 Nov '11

Hi list, I have a setup with postfix+dovecot+mysql unser CentOS 5, running 50 odd domains with virtual users. Access is allowed for public POP3, and a webmail on apache+PHP solution through local IMAP. I'm not gonna give you the long story about the why, but I'm looking for a way to give public IMAP access only to one domain, knowing that users log in with full email (user(a)domain.tld) Anybody has a trick for that? Running dovecot 2.0.13. I know there should be a way to do it through the database, but quite heavy change on our side for a million odd users. Regards, Thierry

3 2

[Dovecot] Dot Lock timestmap, users disconnections from roundcube
by Maria Arrea 04 Nov '11

04 Nov '11

Hello. We are running dovecot 2.0.13 with mdbox+zlib on RHEL 5.7 x64, ext4. We use NTP. Indexes are in a iSCSI raid 10, mailboxes in raid5. No NFS. We have detected that sometimes all users get disconnected from roundcube at the same time. In dovecot logs we hundreds of lines like this: Nov 3 09:23:07 buzon dovecot: imap(mcrivero@mydomain): Warning: Created dotlock file's timestamp is different than current time (1320308587 vs 1320308542): /buzones/mydomain/03/67/mcrivero/subscriptions Nov 3 09:23:07 buzon dovecot: imap(mcrivero@mydomain): Connection closed bytes=0/295 Nov 3 09:23:07 buzon dovecot: imap(delolmo@mydomain): Warning: Created dotlock file's timestamp is different than current time (1320308587 vs 1320308542): /buzones/mydomain/15/77/delolmo/subscriptions Nov 3 09:23:07 buzon dovecot: imap(delolmo@mydomain): Connection closed bytes=0/295 I have been googling but I only see problems with remote NFS, our setup does not use NFS. I give you doveconf -n output & mount options, if more info es needed, please ask. doveconf -n output # 2.0.13: /etc/dovecot/dovecot.conf # OS: Linux 2.6.18-274.el5 x86_64 Red Hat Enterprise Linux Server release 5.7 (Tikanga) ext4 auth_cache_negative_ttl = 10 secs auth_cache_size = 10 M auth_cache_ttl = 2 mins auth_master_user_separator = * auth_mechanisms = plain login auth_worker_max_count = 3500 base_dir = /var/run/dovecot/ default_client_limit = 5000 default_process_limit = 6500 disable_plaintext_auth = no imap_client_workarounds = tb-extra-mailbox-sep delay-newmail tb-lsub-flags lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes mail_fsync = never mail_gid = entrega mail_home = /buzones/mydomain/%2.26Hn/%2.200Hn/%n/home_usuario/ mail_location = mdbox:/buzones/mydomain/%2.26Hn/%2.200Hn/%n:INDEX=/indices_dovecot/indices/%2.26Hn/%2.200Hn/%n mail_max_userip_connections = 15000 mail_plugins = " zlib acl quota autocreate" mail_uid = entrega managesieve_notify_capability = mailto managesieve_sieve_capability = fileinto reject envelope encoded-character vacation subaddress comparator-i;ascii-numeric relational regex imap4flags copy include variables body enotify environment mailbox date mdbox_rotate_interval = 1 days mdbox_rotate_size = 60 M passdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } passdb { args = /etc/usuario_maestro.txt driver = passwd-file master = yes } passdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } plugin { acl = vfile autocreate = SPAM autocreate2 = Sent autocreate3 = Drafts autocreate4 = Trash autosubscribe = SPAM autosubscribe2 = Sent autosubscribe3 = Drafts autosubscribe4 = Trash lda_mailbox_autosubscribe = yes quota = dict:Cuota de usuario::file:/buzones/cuotas/%n quota_rule2 = Trash:storage=+10%% quota_warning = storage=90%% aviso_cuota 90 %u sieve = /buzones/mydomain/%2.26Hn/%2.200Hn/%n/home_usuario/dovecot.sieve sieve_dir = /buzones/mydomain/%2.26Hn/%2.200Hn/%n/home_usuario/sieve/ zlib_save = gz zlib_save_level = 9 } pop3_no_flag_updates = yes protocols = pop3 imap sieve service anvil { client_limit = 25000 } service auth { client_limit = 28000 unix_listener auth-master { user = entrega } unix_listener auth-userdb { user = entrega } user = root } service aviso_cuota { executable = script /usr/local/bin/quota-warning.sh unix_listener aviso_cuota { mode = 0666 } user = entrega } service imap-login { executable = /usr/libexec/dovecot/imap-login group = dovenull service_count = 0 } service imap { executable = /usr/libexec/dovecot/imap process_limit = 6000 } service managesieve-login { executable = /usr/libexec/dovecot/managesieve-login inet_listener sieve { port = 2000 } process_limit = 2000 } service managesieve { executable = /usr/libexec/dovecot/managesieve process_limit = 5000 } service pop3-login { executable = /usr/libexec/dovecot/pop3-login process_limit = 4000 service_count = 0 } service pop3 { executable = /usr/libexec/dovecot/pop3 process_limit = 4000 } ssl_ca = </etc/pki/generico/cacert.crt.pem ssl_cert = </etc/pki/generico/wildcard-us_es.crt ssl_key = </etc/pki/generico/wildcard-key.pem userdb { args = /etc/dovecot/dovecot-ldap.conf driver = ldap } userdb { args = /etc/dovecot/dovecot-ldap-userdb.conf driver = ldap } verbose_proctitle = yes protocol sieve { managesieve_implementation_string = dovecot managesieve_logout_format = bytes=%i/%o managesieve_max_line_length = 65536 } protocol lda { hostname = mydomain info_log_path = log_path = mail_fsync = optimized mail_plugins = sieve zlib quota postmaster_address = evcorreo@mydomain syslog_facility = mail } protocol imap { mail_plugins = zlib autocreate quota imap_quota } protocol pop3 { mail_plugins = zlib pop3_enable_last = yes pop3_uidl_format = %g } mount points: /dev/mapper/Volumen_0-Logico_0 on / type ext3 (rw) proc on /proc type proc (rw) sysfs on /sys type sysfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) /dev/sda1 on /boot type ext3 (rw) tmpfs on /dev/shm type tmpfs (rw) none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) /dev/mapper/Buzon_mydomain-buzones on /buzones type ext4 (rw,noatime,nodiratime,nobarrier,commit=15,data=writeback) Indexes are located somewhere in "/" mount point.

3 2

[Dovecot] IMP, Dovecot and multiple namespaces
by Rick Romero 04 Nov '11

04 Nov '11

Hey guys, I'm wondering what the best way is to be backwards compatible with Courier mailbox formats and not duplicate mailbox trees with Dovecot. Is anyone doing this right now? My Dovecot 2.0.13 is configured as follows for Namespaces: namespace { inbox = yes location = prefix = separator = . } namespace { hidden = yes inbox = no list = no location = prefix = INBOX. separator = . } So I should have an INBOX, plus additional root folders - rather than the Courier default of all folders being subfolders of the INBOX. So when I run LIST in IMAP I get - 08 LIST "" % * LIST (\HasChildren) "." "INBOX" * LIST (\HasChildren) "." "Spam" * LIST (\HasNoChildren) "." "Sent" * LIST (\HasNoChildren) "." "Trash" * LIST (\HasNoChildren) "." "Junk" * LIST (\HasNoChildren) "." "Drafts" Which looks fine. The problem is, IMP (old and new) show two sets of mailboxes (one for each namespace) like so: INBOX Spam Spam.Over10 Sent INBOX.Spam INBOX.Spam.Over10 INBOX.Sent (etc) I assume IMP is walking the INBOX because it says it has Children, and displaying those Children - The Horde team is telling me that's the root of the problem. It makes sense, but I'm not sure what the real solution is. Is it possible to disable Children for a mailbox when an alternate hidden namespace matches the mailbox name? Does that make sense? Or, is there another option I change change in the dovecot config to accomplish the same? Rick

2 1

[Dovecot] Different default realm per listener
by Kai Arif 04 Nov '11

04 Nov '11

Hi all! I want create a large IMAP server setup where dovecot is listening on multiple interfaces and needs a different default realm on each interface. I'm using dovecot 2.0.5 on FreeBSD9 and authenticate against a LDAP database. I found an old mail thread from 2007 that said I'm basically screwed. Has that change since than? Is there any way to use different default realms per listener? Best regards Kai -- Kai Arif - System Administrator Inter.net Germany GmbH Knesebeckstraße 59-61 10719 Berlin Germany Fon +49 30 25430 0 Fax +49 30 25430 499 arif(a)team.de.inter.net www.de.inter.net Legal-Information: Inter.net Germany GmbH, HRB #79136, Amtsgericht Berlin Charlottenburg, UST-IdNr:: DE 813 165 159 FA für Körperschaften I Berlin, Geschäftsführer: Jörn Lubkoll Zuständige Regulierungsbehörde: Bundesnetzagentur Chemnitz, Liselotte-Herrmann-Str. 20a, 09127 Chemnitz, Registriernummer: 06/164

2 1

[Dovecot] LDAP w/SASL "Active Directory" authentication failing.
by David Varela 04 Nov '11

04 Nov '11

Hello, I am running a Dovecot server (version 1.2.17) on FreeBSD 8.2, using LDAP to authenticate Active Directory users. I can successfully bind and authenticate using PLAIN and LDAP without SASL, but obviously passwords for the bind user and the user being authenticated are being passed in plain text. I've attempted to configure my server to us SASL however when I attempt to authenticate a user I see authentication failures. I reviewed the security log on my domain controller and see that the bind user is binding properly, so the issue appears to be orginating from the user authentication, however I cannot determine what the issue is. Here is all the information regarding my configuration, along with the logs from the server: Dovecot -n # 1.2.17: /usr/local/etc/dovecot.conf # OS: FreeBSD 8.2-RELEASE i386 ufs log_path: /var/log/dovecot.log info_log_path: /var/log/dovecot_info.log protocols: imap pop3 imaps pop3s ssl_cert_file: /etc/ssl/dovecot/cert.pem ssl_key_file: /etc/ssl//dovecot/key.pem login_dir: /var/run/dovecot/login login_executable(default): /usr/local/libexec/dovecot/imap-login login_executable(imap): /usr/local/libexec/dovecot/imap-login login_executable(pop3): /usr/local/libexec/dovecot/pop3-login valid_chroot_dirs: /usr/data/vmail verbose_proctitle: yes first_valid_uid: 1001 last_valid_uid: 1001 first_valid_gid: 1001 last_valid_gid: 1001 mail_privileged_group: mail mail_location: maildir:/usr/data/vmail/%u mail_executable(default): /usr/local/libexec/dovecot/imap mail_executable(imap): /usr/local/libexec/dovecot/imap mail_executable(pop3): /usr/local/libexec/dovecot/pop3 mail_plugin_dir(default): /usr/local/lib/dovecot/imap mail_plugin_dir(imap): /usr/local/lib/dovecot/imap mail_plugin_dir(pop3): /usr/local/lib/dovecot/pop3 imap_client_workarounds(default): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(imap): delay-newmail netscape-eoh tb-extra-mailbox-sep imap_client_workarounds(pop3): pop3_client_workarounds(default): pop3_client_workarounds(imap): pop3_client_workarounds(pop3): outlook-no-nuls oe-ns-eoh lda: sendmail_path: /usr/sbin/sendmail auth default: mechanisms: plain gssapi ntlm login username_format: %Ln winbind_helper_path: /usr/local/bin/ntlm_auth verbose: yes debug: yes debug_passwords: yes use_winbind: yes passdb: driver: ldap args: /usr/local/etc/dovecot-ldap.conf userdb: driver: static args: uid=vmail gid=vmail home=/usr/data/vmail/%u socket: type: listen client: path: /var/spool/postfix/private/auth mode: 432 user: postfix group: postfix master: path: /var/run/dovecot/auth-master mode: 384 dovecot-ldap.conf hosts = 192.168.0.240:3268 dn = cn=PostfixBind,ou=IT,ou=Central Office,ou=LMC,dc=smallmountain,dc=Local dnpass = y0urm0mma sasl_bind = yes #sasl_mech = GSSAPI #sasl_realm = smallmountain.local #sasl_authz_id = debug_level = -1 #auth_bind = yes ldap_version = 3 base = dc=smallmountain,dc=Local deref = never scope = subtree user_filter = (&(objectClass=person)(mail=%u)) pass_attrs = mail=user pass_filter = (&(objectClass=person)(sAMAccountName=%n)) dovecot.log Nov 01 09:09:48 dovecot: Warning: Killed with signal 15 (by pid=99758 uid=0 code=kill) Nov 01 09:09:48 auth(default): Error: ldap_pvt_sasl_getmech Nov 01 09:09:48 auth(default): Error: ldap_search Nov 01 09:09:48 auth(default): Error: put_filter: "(objectclass=*)" Nov 01 09:09:48 auth(default): Error: put_filter: simple Nov 01 09:09:48 auth(default): Error: put_simple_filter: "objectclass=*" Nov 01 09:09:48 auth(default): Error: ldap_build_search_req ATTRS: supportedSASLMechanisms Nov 01 09:09:48 auth(default): Error: ldap_send_initial_request Nov 01 09:09:48 auth(default): Error: ldap_new_connection 1 1 0 Nov 01 09:09:48 auth(default): Error: ldap_int_open_connection Nov 01 09:09:48 auth(default): Error: ldap_connect_to_host: TCP 192.168.0.240:3268 Nov 01 09:09:48 auth(default): Error: ldap_new_socket: 11 Nov 01 09:09:48 auth(default): Error: ldap_prepare_socket: 11 Nov 01 09:09:48 auth(default): Error: ldap_connect_to_host: Trying 192.168.0.240:3268 Nov 01 09:09:48 auth(default): Error: ldap_pvt_connect: fd: 11 tm: -1 async: 0 Nov 01 09:09:48 auth(default): Error: ldap_open_defconn: successful Nov 01 09:09:48 auth(default): Error: ldap_send_server_request Nov 01 09:09:48 auth(default): Error: ldap_result ld 0x18611700 msgid 1 Nov 01 09:09:48 auth(default): Error: wait4msg ld 0x18611700 msgid 1 (infinite timeout) Nov 01 09:09:48 auth(default): Error: wait4msg continue ld 0x18611700 msgid 1 all 1 Nov 01 09:09:48 auth(default): Error: ** ld 0x18611700 Connections: Nov 01 09:09:48 auth(default): Error: * host: 192.168.0.240 port: 3268 (default) Nov 01 09:09:48 auth(default): Error: refcnt: 2 status: Connected Nov 01 09:09:48 auth(default): Error: last used: Tue Nov 1 09:09:48 2011 Nov 01 09:09:48 auth(default): Error: Nov 01 09:09:48 auth(default): Error: Nov 01 09:09:48 auth(default): Error: ** ld 0x18611700 Outstanding Requests: Nov 01 09:09:48 auth(default): Error: * msgid 1, origid 1, status InProgress Nov 01 09:09:48 auth(default): Error: outstanding referrals 0, parent count 0 Nov 01 09:09:48 auth(default): Error: ld 0x18611700 request count 1 (abandoned 0) Nov 01 09:09:48 auth(default): Error: ** ld 0x18611700 Response Queue: Nov 01 09:09:48 auth(default): Error: Empty Nov 01 09:09:48 auth(default): Error: ld 0x18611700 response count 0 Nov 01 09:09:48 auth(default): Error: ldap_chkResponseList ld 0x18611700 msgid 1 all 1 Nov 01 09:09:48 auth(default): Error: ldap_chkResponseList returns ld 0x18611700 NULL Nov 01 09:09:48 auth(default): Error: ldap_int_select Nov 01 09:09:48 auth(default): Error: read1msg: ld 0x18611700 msgid 1 all 1 Nov 01 09:09:48 auth(default): Error: read1msg: ld 0x18611700 msgid 1 message type search-entry Nov 01 09:09:48 auth(default): Error: wait4msg continue ld 0x18611700 msgid 1 all 1 Nov 01 09:09:48 auth(default): Error: ** ld 0x18611700 Connections: Nov 01 09:09:48 auth(default): Error: * host: 192.168.0.240 port: 3268 (default) Nov 01 09:09:48 auth(default): Error: refcnt: 2 status: Connected Nov 01 09:09:48 auth(default): Error: last used: Tue Nov 1 09:09:48 2011 Nov 01 09:09:48 auth(default): Error: Nov 01 09:09:48 auth(default): Error: Nov 01 09:09:48 auth(default): Error: ** ld 0x18611700 Outstanding Requests: Nov 01 09:09:48 auth(default): Error: * msgid 1, origid 1, status InProgress Nov 01 09:09:48 auth(default): Error: outstanding referrals 0, parent count 0 Nov 01 09:09:48 auth(default): Error: ld 0x18611700 request count 1 (abandoned 0) Nov 01 09:09:48 auth(default): Error: ** ld 0x18611700 Response Queue: Nov 01 09:09:48 auth(default): Error: * msgid 1, type 100 Nov 01 09:09:48 auth(default): Error: ld 0x18611700 response count 1 Nov 01 09:09:48 auth(default): Error: ldap_chkResponseList ld 0x18611700 msgid 1 all 1 Nov 01 09:09:48 auth(default): Error: ldap_chkResponseList returns ld 0x18611700 NULL Nov 01 09:09:48 auth(default): Error: ldap_int_select Nov 01 09:09:48 auth(default): Error: read1msg: ld 0x18611700 msgid 1 all 1 Nov 01 09:09:48 auth(default): Error: read1msg: ld 0x18611700 msgid 1 message type search-result Nov 01 09:09:48 auth(default): Error: read1msg: ld 0x18611700 0 new referrals Nov 01 09:09:48 auth(default): Error: read1msg: mark request completed, ld 0x18611700 msgid 1 Nov 01 09:09:48 auth(default): Error: request done: ld 0x18611700 msgid 1 Nov 01 09:09:48 auth(default): Error: res_errno: 0, res_error: <>, res_matched: <> Nov 01 09:09:48 auth(default): Error: ldap_free_request (origid 1, msgid 1) Nov 01 09:09:48 auth(default): Error: adding response ld 0x18611700 msgid 1 type 101: Nov 01 09:09:48 auth(default): Error: ldap_parse_result Nov 01 09:09:48 auth(default): Error: ldap_get_values Nov 01 09:09:48 auth(default): Error: ldap_msgfree Nov 01 09:09:48 auth(default): Error: ldap_sasl_interactive_bind: server supports: GSSAPI GSS-SPNEGO EXTERNAL DIGEST-MD5 Nov 01 09:09:48 auth(default): Error: ldap_int_sasl_bind: GSSAPI GSS-SPNEGO EXTERNAL DIGEST-MD5 Nov 01 09:09:48 auth(default): Error: ldap_int_sasl_open: host=adminserver-1.smallmountain.local Nov 01 09:09:48 auth(default): Error: ldap_sasl_bind Nov 01 09:09:48 auth(default): Error: ldap_send_initial_request Nov 01 09:09:48 auth(default): Error: ldap_send_server_request Nov 01 09:09:48 auth(default): Error: ldap_msgfree Nov 01 09:09:48 auth(default): Error: ldap_result ld 0x18611700 msgid 2 Nov 01 09:09:48 auth(default): Error: wait4msg ld 0x18611700 msgid 2 (infinite timeout) Nov 01 09:09:48 auth(default): Error: wait4msg continue ld 0x18611700 msgid 2 all 1 Nov 01 09:09:48 auth(default): Error: ** ld 0x18611700 Connections: Nov 01 09:09:48 auth(default): Error: * host: 192.168.0.240 port: 3268 (default) Nov 01 09:09:48 auth(default): Error: refcnt: 2 status: Connected Nov 01 09:09:48 auth(default): Error: last used: Tue Nov 1 09:09:48 2011 Nov 01 09:09:48 auth(default): Error: Nov 01 09:09:48 auth(default): Error: Nov 01 09:09:48 auth(default): Error: ** ld 0x18611700 Outstanding Requests: Nov 01 09:09:48 auth(default): Error: * msgid 2, origid 2, status InProgress Nov 01 09:09:48 auth(default): Error: outstanding referrals 0, parent count 0 Nov 01 09:09:48 auth(default): Error: ld 0x18611700 request count 1 (abandoned 0) Nov 01 09:09:48 auth(default): Error: ** ld 0x18611700 Response Queue: Nov 01 09:09:48 auth(default): Error: Empty Nov 01 09:09:48 auth(default): Error: ld 0x18611700 response count 0 Nov 01 09:09:48 auth(default): Error: ldap_chkResponseList ld 0x18611700 msgid 2 all 1 Nov 01 09:09:48 auth(default): Error: ldap_chkResponseList returns ld 0x18611700 NULL Nov 01 09:09:48 auth(default): Error: ldap_int_select Nov 01 09:09:48 auth(default): Error: read1msg: ld 0x18611700 msgid 2 all 1 Nov 01 09:09:48 auth(default): Error: read1msg: ld 0x18611700 msgid 2 message type bind Nov 01 09:09:48 auth(default): Error: read1msg: ld 0x18611700 0 new referrals Nov 01 09:09:48 auth(default): Error: read1msg: mark request completed, ld 0x18611700 msgid 2 Nov 01 09:09:48 auth(default): Error: request done: ld 0x18611700 msgid 2 Nov 01 09:09:48 auth(default): Error: res_errno: 14, res_error: <>, res_matched: <> Nov 01 09:09:48 auth(default): Error: ldap_free_request (origid 2, msgid 2) Nov 01 09:09:48 auth(default): Error: ldap_int_sasl_bind: <null> Nov 01 09:09:48 auth(default): Error: ldap_parse_sasl_bind_result Nov 01 09:09:48 auth(default): Error: ldap_parse_result Nov 01 09:09:48 auth(default): Error: sasl_client_step: 2 Nov 01 09:09:48 auth(default): Error: sasl_client_step: 1 Nov 01 09:09:48 auth(default): Error: ldap_sasl_bind Nov 01 09:09:48 auth(default): Error: ldap_send_initial_request Nov 01 09:09:48 auth(default): Error: ldap_send_server_request Nov 01 09:09:48 auth(default): Error: ldap_msgfree Nov 01 09:09:48 auth(default): Error: ldap_result ld 0x18611700 msgid 3 Nov 01 09:09:48 auth(default): Error: wait4msg ld 0x18611700 msgid 3 (infinite timeout) Nov 01 09:09:48 auth(default): Error: wait4msg continue ld 0x18611700 msgid 3 all 1 Nov 01 09:09:48 auth(default): Error: ** ld 0x18611700 Connections: Nov 01 09:09:48 auth(default): Error: * host: 192.168.0.240 port: 3268 (default) Nov 01 09:09:48 auth(default): Error: refcnt: 2 status: Connected Nov 01 09:09:48 auth(default): Error: last used: Tue Nov 1 09:09:48 2011 Nov 01 09:09:48 auth(default): Error: Nov 01 09:09:48 auth(default): Error: Nov 01 09:09:48 auth(default): Error: ** ld 0x18611700 Outstanding Requests: Nov 01 09:09:48 auth(default): Error: * msgid 3, origid 3, status InProgress Nov 01 09:09:48 auth(default): Error: outstanding referrals 0, parent count 0 Nov 01 09:09:48 auth(default): Error: ld 0x18611700 request count 1 (abandoned 0) Nov 01 09:09:48 auth(default): Error: ** ld 0x18611700 Response Queue: Nov 01 09:09:48 auth(default): Error: Empty Nov 01 09:09:48 auth(default): Error: ld 0x18611700 response count 0 Nov 01 09:09:48 auth(default): Error: ldap_chkResponseList ld 0x18611700 msgid 3 all 1 Nov 01 09:09:48 auth(default): Error: ldap_chkResponseList returns ld 0x18611700 NULL Nov 01 09:09:48 auth(default): Error: ldap_int_select Nov 01 09:09:48 auth(default): Error: read1msg: ld 0x18611700 msgid 3 all 1 Nov 01 09:09:48 auth(default): Error: read1msg: ld 0x18611700 msgid 3 message type bind Nov 01 09:09:48 auth(default): Error: read1msg: ld 0x18611700 0 new referrals Nov 01 09:09:48 auth(default): Error: read1msg: mark request completed, ld 0x18611700 msgid 3 Nov 01 09:09:48 auth(default): Error: request done: ld 0x18611700 msgid 3 Nov 01 09:09:48 auth(default): Error: res_errno: 14, res_error: <>, res_matched: <> Nov 01 09:09:48 auth(default): Error: ldap_free_request (origid 3, msgid 3) Nov 01 09:09:48 auth(default): Error: ldap_int_sasl_bind: <null> Nov 01 09:09:48 auth(default): Error: ldap_parse_sasl_bind_result Nov 01 09:09:48 auth(default): Error: ldap_parse_result Nov 01 09:09:48 auth(default): Error: sasl_client_step: 0 Nov 01 09:09:48 auth(default): Error: ldap_sasl_bind Nov 01 09:09:48 auth(default): Error: ldap_send_initial_request Nov 01 09:09:48 auth(default): Error: ldap_send_server_request Nov 01 09:09:48 auth(default): Error: ldap_msgfree Nov 01 09:09:48 auth(default): Error: ldap_result ld 0x18611700 msgid 4 Nov 01 09:09:48 auth(default): Error: wait4msg ld 0x18611700 msgid 4 (infinite timeout) Nov 01 09:09:48 auth(default): Error: wait4msg continue ld 0x18611700 msgid 4 all 1 Nov 01 09:09:48 auth(default): Error: ** ld 0x18611700 Connections: Nov 01 09:09:48 auth(default): Error: * host: 192.168.0.240 port: 3268 (default) Nov 01 09:09:48 auth(default): Error: refcnt: 2 status: Connected Nov 01 09:09:48 auth(default): Error: last used: Tue Nov 1 09:09:48 2011 Nov 01 09:09:48 auth(default): Error: Nov 01 09:09:48 auth(default): Error: Nov 01 09:09:48 auth(default): Error: ** ld 0x18611700 Outstanding Requests: Nov 01 09:09:48 auth(default): Error: * msgid 4, origid 4, status InProgress Nov 01 09:09:48 auth(default): Error: outstanding referrals 0, parent count 0 Nov 01 09:09:48 auth(default): Error: ld 0x18611700 request count 1 (abandoned 0) Nov 01 09:09:48 auth(default): Error: ** ld 0x18611700 Response Queue: Nov 01 09:09:48 auth(default): Error: Empty Nov 01 09:09:48 auth(default): Error: ld 0x18611700 response count 0 Nov 01 09:09:48 auth(default): Error: ldap_chkResponseList ld 0x18611700 msgid 4 all 1 Nov 01 09:09:48 auth(default): Error: ldap_chkResponseList returns ld 0x18611700 NULL Nov 01 09:09:48 auth(default): Error: ldap_int_select Nov 01 09:09:48 auth(default): Error: read1msg: ld 0x18611700 msgid 4 all 1 Nov 01 09:09:48 auth(default): Error: read1msg: ld 0x18611700 msgid 4 message type bind Nov 01 09:09:48 auth(default): Error: read1msg: ld 0x18611700 0 new referrals Nov 01 09:09:48 auth(default): Error: read1msg: mark request completed, ld 0x18611700 msgid 4 Nov 01 09:09:48 auth(default): Error: request done: ld 0x18611700 msgid 4 Nov 01 09:09:48 auth(default): Error: res_errno: 0, res_error: <>, res_matched: <> Nov 01 09:09:48 auth(default): Error: ldap_free_request (origid 4, msgid 4) Nov 01 09:09:48 auth(default): Error: ldap_int_sasl_bind: <null> Nov 01 09:09:48 auth(default): Error: ldap_parse_sasl_bind_result Nov 01 09:09:48 auth(default): Error: ldap_parse_result Nov 01 09:09:48 auth(default): Error: ldap_pvt_sasl_generic_install Nov 01 09:09:48 auth(default): Error: ldap_msgfree Nov 01 09:10:13 auth(default): Error: ldap_search Nov 01 09:10:13 auth(default): Error: put_filter: "(&(objectClass=person)(sAMAccountName=davidv))" Nov 01 09:10:13 auth(default): Error: put_filter: AND Nov 01 09:10:13 auth(default): Error: put_filter_list "(objectClass=person)(sAMAccountName=davidv)" Nov 01 09:10:13 auth(default): Error: put_filter: "(objectClass=person)" Nov 01 09:10:13 auth(default): Error: put_filter: simple Nov 01 09:10:13 auth(default): Error: put_simple_filter: "objectClass=person" Nov 01 09:10:13 auth(default): Error: put_filter: "(sAMAccountName=davidv)" Nov 01 09:10:13 auth(default): Error: put_filter: simple Nov 01 09:10:13 auth(default): Error: put_simple_filter: "sAMAccountName=davidv" Nov 01 09:10:13 auth(default): Error: ldap_build_search_req ATTRS: mail Nov 01 09:10:13 auth(default): Error: ldap_send_initial_request Nov 01 09:10:13 auth(default): Error: ldap_send_server_request Nov 01 09:10:13 auth(default): Error: ldap_result ld 0x18611700 msgid -1 Nov 01 09:10:13 auth(default): Error: wait4msg ld 0x18611700 msgid -1 (timeout 0 usec) Nov 01 09:10:13 auth(default): Error: wait4msg continue ld 0x18611700 msgid -1 all 1 Nov 01 09:10:13 auth(default): Error: ** ld 0x18611700 Connections: Nov 01 09:10:13 auth(default): Error: * host: 192.168.0.240 port: 3268 (default) Nov 01 09:10:13 auth(default): Error: refcnt: 2 status: Connected Nov 01 09:10:13 auth(default): Error: last used: Tue Nov 1 09:10:13 2011 Nov 01 09:10:13 auth(default): Error: Nov 01 09:10:13 auth(default): Error: Nov 01 09:10:13 auth(default): Error: ** ld 0x18611700 Outstanding Requests: Nov 01 09:10:13 auth(default): Error: * msgid 5, origid 5, status InProgress Nov 01 09:10:13 auth(default): Error: outstanding referrals 0, parent count 0 Nov 01 09:10:13 auth(default): Error: ld 0x18611700 request count 1 (abandoned 0) Nov 01 09:10:13 auth(default): Error: ** ld 0x18611700 Response Queue: Nov 01 09:10:13 auth(default): Error: Empty Nov 01 09:10:13 auth(default): Error: ld 0x18611700 response count 0 Nov 01 09:10:13 auth(default): Error: ldap_chkResponseList ld 0x18611700 msgid -1 all 1 Nov 01 09:10:13 auth(default): Error: ldap_chkResponseList returns ld 0x18611700 NULL Nov 01 09:10:13 auth(default): Error: ldap_int_select Nov 01 09:10:13 auth(default): Error: read1msg: ld 0x18611700 msgid -1 all 1 Nov 01 09:10:13 auth(default): Error: read1msg: ld 0x18611700 msgid 5 message type search-entry Nov 01 09:10:13 auth(default): Error: read1msg: ld 0x18611700 msgid 5 message type search-result Nov 01 09:10:13 auth(default): Error: read1msg: ld 0x18611700 0 new referrals Nov 01 09:10:13 auth(default): Error: read1msg: mark request completed, ld 0x18611700 msgid 5 Nov 01 09:10:13 auth(default): Error: request done: ld 0x18611700 msgid 5 Nov 01 09:10:13 auth(default): Error: res_errno: 0, res_error: <>, res_matched: <> Nov 01 09:10:13 auth(default): Error: ldap_free_request (origid 5, msgid 5) Nov 01 09:10:13 auth(default): Error: adding response ld 0x18611700 msgid 5 type 101: Nov 01 09:10:13 auth(default): Error: ldap_parse_result Nov 01 09:10:13 auth(default): Error: ldap_first_attribute Nov 01 09:10:13 auth(default): Error: ldap_get_values Nov 01 09:10:13 auth(default): Error: ldap_next_attribute Nov 01 09:10:13 auth(default): Error: ldap_msgfree Nov 01 09:10:13 auth(default): Error: ldap_result ld 0x18611700 msgid -1 Nov 01 09:10:13 auth(default): Error: wait4msg ld 0x18611700 msgid -1 (timeout 0 usec) Nov 01 09:10:13 auth(default): Error: wait4msg continue ld 0x18611700 msgid -1 all 1 Nov 01 09:10:13 auth(default): Error: ** ld 0x18611700 Connections: Nov 01 09:10:13 auth(default): Error: * host: 192.168.0.240 port: 3268 (default) Nov 01 09:10:13 auth(default): Error: refcnt: 1 status: Connected Nov 01 09:10:13 auth(default): Error: last used: Tue Nov 1 09:10:13 2011 Nov 01 09:10:13 auth(default): Error: Nov 01 09:10:13 auth(default): Error: Nov 01 09:10:13 auth(default): Error: ** ld 0x18611700 Outstanding Requests: Nov 01 09:10:13 auth(default): Error: Empty Nov 01 09:10:13 auth(default): Error: ld 0x18611700 request count 0 (abandoned 0) Nov 01 09:10:13 auth(default): Error: ** ld 0x18611700 Response Queue: Nov 01 09:10:13 auth(default): Error: Empty Nov 01 09:10:13 auth(default): Error: ld 0x18611700 response count 0 Nov 01 09:10:13 auth(default): Error: ldap_chkResponseList ld 0x18611700 msgid -1 all 1 Nov 01 09:10:13 auth(default): Error: ldap_chkResponseList returns ld 0x18611700 NULL Nov 01 09:10:13 auth(default): Error: ldap_int_select Nov 01 09:13:26 auth(default): Error: ldap_search Nov 01 09:13:26 auth(default): Error: put_filter: "(&(objectClass=person)(sAMAccountName=davidv))" Nov 01 09:13:26 auth(default): Error: put_filter: AND Nov 01 09:13:26 auth(default): Error: put_filter_list "(objectClass=person)(sAMAccountName=davidv)" Nov 01 09:13:26 auth(default): Error: put_filter: "(objectClass=person)" Nov 01 09:13:26 auth(default): Error: put_filter: simple Nov 01 09:13:26 auth(default): Error: put_simple_filter: "objectClass=person" Nov 01 09:13:26 auth(default): Error: put_filter: "(sAMAccountName=davidv)" Nov 01 09:13:26 auth(default): Error: put_filter: simple Nov 01 09:13:26 auth(default): Error: put_simple_filter: "sAMAccountName=davidv" Nov 01 09:13:26 auth(default): Error: ldap_build_search_req ATTRS: mail Nov 01 09:13:26 auth(default): Error: ldap_send_initial_request Nov 01 09:13:26 auth(default): Error: ldap_send_server_request Nov 01 09:13:26 auth(default): Error: ldap_result ld 0x18611700 msgid -1 Nov 01 09:13:26 auth(default): Error: wait4msg ld 0x18611700 msgid -1 (timeout 0 usec) Nov 01 09:13:26 auth(default): Error: wait4msg continue ld 0x18611700 msgid -1 all 1 Nov 01 09:13:26 auth(default): Error: ** ld 0x18611700 Connections: Nov 01 09:13:26 auth(default): Error: * host: 192.168.0.240 port: 3268 (default) Nov 01 09:13:26 auth(default): Error: refcnt: 2 status: Connected Nov 01 09:13:26 auth(default): Error: last used: Tue Nov 1 09:13:26 2011 Nov 01 09:13:26 auth(default): Error: Nov 01 09:13:26 auth(default): Error: Nov 01 09:13:26 auth(default): Error: ** ld 0x18611700 Outstanding Requests: Nov 01 09:13:26 auth(default): Error: * msgid 6, origid 6, status InProgress Nov 01 09:13:26 auth(default): Error: outstanding referrals 0, parent count 0 Nov 01 09:13:26 auth(default): Error: ld 0x18611700 request count 1 (abandoned 0) Nov 01 09:13:26 auth(default): Error: ** ld 0x18611700 Response Queue: Nov 01 09:13:26 auth(default): Error: Empty Nov 01 09:13:26 auth(default): Error: ld 0x18611700 response count 0 Nov 01 09:13:26 auth(default): Error: ldap_chkResponseList ld 0x18611700 msgid -1 all 1 Nov 01 09:13:26 auth(default): Error: ldap_chkResponseList returns ld 0x18611700 NULL Nov 01 09:13:26 auth(default): Error: ldap_int_select Nov 01 09:13:26 auth(default): Error: read1msg: ld 0x18611700 msgid -1 all 1 Nov 01 09:13:26 auth(default): Error: read1msg: ld 0x18611700 msgid 6 message type search-entry Nov 01 09:13:26 auth(default): Error: read1msg: ld 0x18611700 msgid 6 message type search-result Nov 01 09:13:26 auth(default): Error: read1msg: ld 0x18611700 0 new referrals Nov 01 09:13:26 auth(default): Error: read1msg: mark request completed, ld 0x18611700 msgid 6 Nov 01 09:13:26 auth(default): Error: request done: ld 0x18611700 msgid 6 Nov 01 09:13:26 auth(default): Error: res_errno: 0, res_error: <>, res_matched: <> Nov 01 09:13:26 auth(default): Error: ldap_free_request (origid 6, msgid 6) Nov 01 09:13:26 auth(default): Error: adding response ld 0x18611700 msgid 6 type 101: Nov 01 09:13:26 auth(default): Error: ldap_parse_result Nov 01 09:13:26 auth(default): Error: ldap_first_attribute Nov 01 09:13:26 auth(default): Error: ldap_get_values Nov 01 09:13:26 auth(default): Error: ldap_next_attribute Nov 01 09:13:26 auth(default): Error: ldap_msgfree Nov 01 09:13:26 auth(default): Error: ldap_result ld 0x18611700 msgid -1 Nov 01 09:13:26 auth(default): Error: wait4msg ld 0x18611700 msgid -1 (timeout 0 usec) Nov 01 09:13:26 auth(default): Error: wait4msg continue ld 0x18611700 msgid -1 all 1 Nov 01 09:13:26 auth(default): Error: ** ld 0x18611700 Connections: Nov 01 09:13:26 auth(default): Error: * host: 192.168.0.240 port: 3268 (default) Nov 01 09:13:26 auth(default): Error: refcnt: 1 status: Connected Nov 01 09:13:26 auth(default): Error: last used: Tue Nov 1 09:13:26 2011 Nov 01 09:13:26 auth(default): Error: Nov 01 09:13:26 auth(default): Error: Nov 01 09:13:26 auth(default): Error: ** ld 0x18611700 Outstanding Requests: Nov 01 09:13:26 auth(default): Error: Empty Nov 01 09:13:26 auth(default): Error: ld 0x18611700 request count 0 (abandoned 0) Nov 01 09:13:26 auth(default): Error: ** ld 0x18611700 Response Queue: Nov 01 09:13:26 auth(default): Error: Empty Nov 01 09:13:26 auth(default): Error: ld 0x18611700 response count 0 Nov 01 09:13:26 auth(default): Error: ldap_chkResponseList ld 0x18611700 msgid -1 all 1 Nov 01 09:13:26 auth(default): Error: ldap_chkResponseList returns ld 0x18611700 NULL Nov 01 09:13:26 auth(default): Error: ldap_int_select dovecot_info.log Nov 01 09:09:48 dovecot: Info: Dovecot v1.2.17 starting up Nov 01 09:09:49 auth(default): Info: new auth connection: pid=99773 Nov 01 09:09:49 auth(default): Info: new auth connection: pid=99774 Nov 01 09:09:49 auth(default): Info: new auth connection: pid=99775 Nov 01 09:09:49 auth(default): Info: new auth connection: pid=99776 Nov 01 09:09:49 auth(default): Info: new auth connection: pid=99777 Nov 01 09:09:49 auth(default): Info: new auth connection: pid=99778 Nov 01 09:10:09 auth(default): Info: new auth connection: pid=99782 Nov 01 09:10:13 auth(default): Info: client in: AUTH 1 PLAIN service=imap secured lip=127.0.0.1 rip=127.0.0.1 lport=993 rport=55010 resp=AGRhdmlkdgBlbGkqNDJ0dW4= Nov 01 09:10:13 auth(default): Info: ldap(davidv,127.0.0.1): pass search: base=dc=smallmountain,dc=Local scope=subtree filter=(&(objectClass=person)(sAMAccountName=davidv)) fields=mail Nov 01 09:10:13 auth(default): Info: auth(davidv,127.0.0.1): username changed davidv -> davidv(a)smallmountain.net Nov 01 09:10:13 auth(default): Info: ldap(davidv(a)smallmountain.net,127.0.0.1): result: mail(user)=davidv(a)smallmountain.net Nov 01 09:10:13 auth(default): Info: ldap(davidv(a)smallmountain.net,127.0.0.1): No password returned (and no nopassword) Nov 01 09:10:15 auth(default): Info: client out: FAIL 1 user=davidv(a)smallmountain.net Nov 01 09:13:13 imap-login: Info: Disconnected: Inactivity (auth failed, 1 attempts): user=<davidv(a)smallmountain.net>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, TLS Nov 01 09:13:21 auth(default): Info: new auth connection: pid=99797 Nov 01 09:13:26 auth(default): Info: client in: AUTH 1 PLAIN service=imap secured lip=127.0.0.1 rip=127.0.0.1 lport=993 rport=61080 resp=AGRhdmlkdgBlbGkqNDJ0dW4= Nov 01 09:13:26 auth(default): Info: ldap(davidv,127.0.0.1): pass search: base=dc=smallmountain,dc=Local scope=subtree filter=(&(objectClass=person)(sAMAccountName=davidv)) fields=mail Nov 01 09:13:26 auth(default): Info: auth(davidv,127.0.0.1): username changed davidv -> davidv(a)smallmountain.net Nov 01 09:13:26 auth(default): Info: ldap(davidv(a)smallmountain.net,127.0.0.1): result: mail(user)=davidv(a)smallmountain.net Nov 01 09:13:26 auth(default): Info: ldap(davidv(a)smallmountain.net,127.0.0.1): No password returned (and no nopassword) Nov 01 09:13:28 auth(default): Info: client out: FAIL 1 user=davidv(a)smallmountain.net Nov 01 09:13:36 imap-login: Info: Aborted login (auth failed, 1 attempts): user=<davidv(a)smallmountain.net>, method=PLAIN, rip=127.0.0.1, lip=127.0.0.1, TLS Your assistance is greatly appreciated, David

2 1

[Dovecot] post login script
by Osvaldo Alvarez Pozo 04 Nov '11

04 Nov '11

Hello all, I am testing postlogin script with dovecot 2. I works but i would like that the imap and pop session get executed even if the post-login script fail. my postlogin script is very simple: #/etc/dovecot/conf.d/10-master.conf service imap { executable = imap imap-postlogin } # service imap-postlogin { executable = script-login /usr/local/bin/postlogin.sh unix_listener imap-postlogin { } } service pop3 { executable = pop3 imap-postlogin } #/usr/local/bin/postlogin.sh echo "UPDATE mailbox SET last_login = now() WHERE username = '$USER'" | mysql -upostlogin -pXXXXXXXX postfixadmin exec "$@" Thanks in advance Osvaldo

3 4

[Dovecot] What owner/permissions for virtual homes?
by sean darcy 04 Nov '11

04 Nov '11

VirtualUsers.Home.txt: The directory layouts for home and mail directories could look like one of these (in the preferred order): 1. Mail directory under home, for example: home='/var/vmail/domain/user/' mail='/var/vmail/domain/user/mail/' Who should be the owner of these directories, with that permissions? Does it make a difference if it's /home/vmail rather than /var/vmail? Thanks, Jay

2 2